Philips MCD716/05 User manual

Quick Start Guide

MCD716

What’s in the Box?

You should find these items upon opening the box.

Control Cable Composite Video Cable

Remote control with two

AAA batteries

FM antenna Quick start guide User manual

MCD716 QUG_05_Eng 1 2008.1.4, 14:49

Tips

– See the User Manual for other TV connection options.

– For connecting to a Progressive Scan

TV, refer to the user manual for proper connections and detailed setup.

1

Connect the speaker cables.

2

Connect the FM antenna.

3

Connect the control cable.

4

Connect the composite video cable to a TV.

5

Connect the power cords of the system and TV.

AC power

5

Speaker

(right)

FM antenna

2 4

Speaker

(left)

3

1

1

Setting up the TV

Press SOURCE ( DISC on the remote) to select disc source.

2

Turn on the TV and set it to the correct Video In channel.

MCD716 QUG_05_Eng 2 2008.1.4, 14:49

Setting the clock

1

In standby mode, press and hold CLOCK on the remote.

2

When the hour digits flash, turn VOLUME-/+ on the system or press VOL +/ on the remote to set the hours.

3

Press CLOCK again and the minute digits flash. Then turn VOLUME-/+ on the system or press VOL +/ on the remote to set the minutes.

4

Press CLOCK again to confirm the time setting.

Setting DVD menu options

IMPORTANT!

If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly, see the user manual for proper progressive scan setup or deactivate the progressive scan feature as below:

1) Turn off your TV progressive scan mode or turn on to interlaced mode.

2) Press SYSTEM MENU on the remote to exit the system menu and then DISC and “1” to exit progressive scan.

DIGITAL AUDIO SETUP

3D PROCESSING

DIVX (R) VOD

PICTURE SETTING

Tip

See chapters "Getting Started" and "System Menu Options" in the

User Manual for detailed descriptions.

MCD716 QUG_05_Eng 3 2008.1.4, 14:49

Playing a disc

1

Press OPEN •CLOSE ç ( ç on the remote control) to open the disc tray and load in a disc, then press the same button again to close the disc tray.

➜ Make sure the label side of the disc is facing up.

2

Playback will start automatically. If not press ÉÅ .

3

To stop playback, press PRESET-/

9

(

9

on the remote).

Programming and tuning to radio stations

1

Press SOURCE ( TUNER on the remote) to select tuner source.

2

Press PROGRAM on the remote for more than two seconds to program all available stations in order of waveband.

3

Press PRESET+/-

( ¡ / ™

on the remote) until the desired preset station is displayed.

OPEN•CLOSE

Playing a USB mass storage device

With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),

USB flash players (USB 2.0 or USB1.1)

, memory cards (requires an additional card reader to

work with this Hi-Fi system).

1

Insert the USB device’s USB plug into the socket on the set.

2

Press SOURCE once or more (or USB on the remote control) to select USB .

3

Play the USB’s audio files as you do with the albums/tracks on a CD,

Tip

Detailed playback features and additional functions are described in the accompany owner's manual.

MCD716 QUG_05_Eng 4

Notes for remote control:

– First, select the source you wish to control by pressing one of the source select keys on the remote control (DISC or TUNER, for example).

– Then select the desired function ( 2;, í, ë for example).

PDCC-JS/JW-0801

2008.1.4, 14:49