Philips MCD735 User manual

Quick Start Guide

MCD 735

BAND BAND

What’s in the Box?

You should find these items upon opening the box.

A/V cord (R/W/Y)

Subwoofer cable

AC power cord

FM and AM antennas

Quick start guide

User manual

Control Cable

MCD735 QUG_Eng 1 2006.7.20, 15:10

Tips

– See the User Manual for other TV connection options.

– For connecting to a Progressive Scan

TV, refer to the user manual for proper connections and detailed setup.

AC power 5

4

Front Speaker

(right)

RearSpeaker

(right)

1

Connect the speaker and subwoofer cables.

2

Connect the AM and FM antennas.

3

Connect the control cable.

4

Connect the A/V cord to a TV.

5

Connect the power cords of the system and TV.

FM Antenna

AM Antenna

2

AC power

3

5

Center

Speaker

1 Front Speaker

(left)

Rear Speaker

(left)

Subwoofer

Setting up the TV

1

Press

SOURCE

(

DISC

on the remote) to select disc source.

2

Turn on the TV and set it to the correct Video In channel.

MCD735 QUG_Eng 2 2006.7.20, 15:10

Setting the clock

IMPORTANT!

– To set clock in the Eco Power mode, press and hold STANDBY-ON/ECO POWER 2 on the set for 3 seconds or more to switch to normal standby mode first before proceeding with the procedures below.

1

In standby mode, press and hold

CLOCK

on the remote.

2

When the hour digits flash, turn

VOLUME-/+

on the system or press

VOLUME+/-

on the remote to set the hours.

3

Press

CLOCK

again and the minute digits flash. Then turn

VOLUME-/+

on the system or press

VOLUME+/-

on the remote to set the minutes.

4

Press

CLOCK

again to confirm the time setting.

Setting DVD menu options

IMPORTANT!

If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly, see the user manual for proper progressive scan setup or deactivate the progressive scan feature as below:

1) Turn off your TV progressive scan mode or turn on to interlaced mode.

2) Press SYSTEM on the remote to exit the system menu and then DISC and “1” to exit progressive scan.

DIVX(R) VOD

Tip

See chapters "Preparations" and "System Menu Options" in the User

Manual for detailed descriptions.

MCD735 QUG_Eng 3 2006.7.20, 15:10

Playing a disc

1

Press

OPEN •CLOSE

( ç on the remote) to open the disc tray and load in a disc, then press the same button again to close the disc tray.

➜ Make sure the label side of the disc is facing up.

2

Playback will start automatically. If not press ÉÅ .

3

To stop playback, press

PRESET-/

9

(

9

on the remote).

Programming and tuning to radio stations

1

Press

SOURCE

(

TUNER

on the remote) to select tuner source.

2

Press

PROG

on the remote for more than two seconds to program all available stations in order of waveband.

3

Press

PRESET+/-

(

CH +/- (

¡ / ™)

on the remote) until the desired preset station is displayed.

Tip

Detailed playback features and additional functions are described in the accompany owner's manual.

Notes for remote control:

– First, select the source you wish to control by pressing one of the source select keys on the remote control (DISC or TUNER, for example).

– Then select the desired function ( 2;, í, ë for example).

MCD735 QUG_Eng 4

2005 C Koninklijie Philips Electronics

N.V. All rights reserved.

http://www.philips.com

2006.7.20, 15:10

PDCC-JS/JW-0627