Philips PET712/05 User manual

PET712/12
Register your product and get support at
© 2007 Koninklijke Philips Electronics N.V.
All rights reserved.
Document order number: 000000000000
EN User manual
4
Contents
1 Important
Safety
Notice
6
6
14
2 Your Portable DVD player 17
Introduction
What’s in the box
Overview of the main unit
Overview of the displays
Overview of the remote control
17
18
19
21
23
3 Get started 26
Preparation
Connect audio/video cables
Connect power
Install remote control batteries
Connect headphones
Select display language
26
28
29
31
32
32
4 Use your player 34
Turn on
Play discs
Adjust volume
Adjust display
Play options
34
34
35
36
37
5 Adjust settings 41
Playback control options
DivX Video-on-Demand code
Restrict access
Return to default settings
Select TV display aspect ratio
Select video output format
Select audio output
Select digital audio output
41
41
42
44
44
45
46
46
6 Troubleshooting 47
7 Product information 50
1 Important
Safety
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
i For countries with a polarized mains, do not
defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other.
A grounding type plug has two blades and
a third grounding prong. The wide blade
or the third prong are provided for your
safety. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
Caution: To prevent electric shock, match
the wide blade of the plug to the wide slot,
fully insert.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
h Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
j Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
k Only use attachments/accessories specified
by the manufacturer.
l Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
m Unplug this apparatus during lightning
storms or when unused for long periods of
time.
n Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
o Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
•
•
•
Install all batteries correctly, + and - as
marked on the unit.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
Remove batteries when the unit is not
used for a long time.
p Apparatus shall not be exposed to dripping
or splashing.
q Do not place any sources of danger on the
apparatus (e.g. liquid filled objects, lighted
candles).
r This product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
Alliance: www.eiae.org.
Warning
•
•
•
•
•
•
Never remove the casing of this player.
Never lubricate any part of this player.
Never place this player on other electrical equipment.
Keep this player away from direct sunlight, naked flames
or heat.
Never look into the laser beam inside the player.
Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect the player from the
power.
How to connect a plug
The wires in the mains lead are coloured with the
following code: blue = neutral (N), brown = live
(L).
As these colours may not correspond with the
colour markings identifying the terminals in your
plug, proceed as follows:
• Connect the blue wire to the terminal
marked N or coloured black.
• Connect the brown wire to the terminal
marked L or coloured red.
• Do not connect either wire to the earth
terminal in the plug, marked E (or e) or
coloured green (or green and yellow).
Before replacing the plug cover, make certain
that the cord grip is clamped over the sheath
of the lead - not simply over the two wires.
Mains plug
This apparatus is fitted with an approved 13 Amp
plug. To change a fuse in this type of plug proceed
as follows:
a Remove fuse cover and fuse.
b Fix new fuse which should be a BS13625
Amp, A.S.T.A. or BSI approved type.
c Refit the fuse cover.
If the fitted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should have
a value of 5 Amp. If a plug without a fuse is used,
the fuse at the distribution board should not be
greater than 5 Amp.
The severed plug must be disposed off to avoid a
possible shock hazard should it be inserted into a
13 Amp socket elsewhere.
Norge
Typeskilt finnes på apparatens bakside.
Observer: Nettbryteren er sekundert innkoplet.
Den innebygde netdelen er derfor ikke
fraktoplet nettet så lenge apparatet er tilsluttet
nettkontakten.
For å redusere faren for brann eller elektrisk støt,
skal apparatet, ikke utsettes for regn eller fuktighet.
Hearing safety
Listen at a moderate volume.
• Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that may
cause hearing loss for a normal person, even
for exposure less than a minute. The higher
decibel ranges are offered for those that may
have already experienced some hearing loss.
• Sound can be deceiving. Over time your
hearing “comfort level” adapts to higher
volumes of sound. So after prolonged
listening, what sounds “normal” can actually
be loud and harmful to your hearing. To
guard against this, set your volume to a safe
level before your hearing adapts and leave it
there.
To establish a safe volume level:
• Set your volume control at a low setting.
• Slowly increase the sound until you can hear
it comfortably and clearly, without distortion.
Listen for reasonable periods of time:
• Prolonged exposure to sound, even at
normally “safe” levels, can also cause hearing
loss.
• Be sure to use your equipment reasonably
and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
• Listen at reasonable volumes for reasonable
periods of time.
• Be careful not to adjust the volume as your
hearing adapts.
• Do not turn up the volume so high that you
can’t hear what’s around you.
• You should use caution or temporarily
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
skateboarding, etc.; it may create a traffic
hazard and is illegal in many areas.
Notice
This product complies with the radio interference
requirements of the European Community.
This product complies with the requirements of
the following directives and guidelines: 73/23/EEC
+ 89/336/EEC + 93/68/EEC
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Electronics may void the user’s
authority to operate the equipment.
The making of unauthorized copies of copyprotected material, including computer programs,
files, broadcasts and sound recordings, may be
an infringement of copyrights and constitute a
criminal offence. This equipment should not be
used for such purposes.
Recording and playback of material may require
consent. See Copyright Act 1956 and The
Performer’s Protection Acts 1958 to 1972.
Disposal of product and packing
material
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product, it means the product is
covered by the European Directive 2002/96/EC.
Please be informed about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and do
not dispose of your old product with your normal
household waste. The correct disposal of your
old product will help prevent potential negative
consequences to the environment and human
health.
All redundant packing material has been omitted.
We have done our utmost to make the packaging
easily separable into mono materials.
Please observe the local regulations regarding the
disposal of packing materials.
This player includes this label:
2 Your Portable
DVD player
Congratulations on your purchase, and welcome
to Philips! To fully benefit from the support that
Philips offers, register your product at www.Philips.
com/welcome.
Introduction
Your portable DVD player plays digital video discs
conforming to the universal DVD Video standard.
With it, you can play movies with true cinema
picture quality and stereo or multi-channel sound
(depending on disc and playback set-up).
You can also select sound track, subtitle languages,
and different angle of view (again depending on
DVD disc). Besides, you can set parental control
to prevent your children to see certain discs.
You can play the following discs on the DVD
player:
DVD video disc
Overview of the main unit
Video CDs
MP3s
a
b
Audio CDs
e
c
CD with JPEG files
f
d
What’s in the box
h
i
g
Check and identify the contents of your package:
• Portable DVD player
• 7” LCD screen x 2
• Remote control
• AC power adaptor
• Car adaptor (12V)
• AV cable x 2
• Car pouch x 2
• Y-type power cord
j
k
m
n
a
•
l
Move cursor up / down
b
c
•
/
•
Skip to previous/next chapter, track or
title
Move cursor to left/right
•
Start or interrupt play
d MENU
• Enter or exit DVD menu
e
•
Stop play
f SETUP
• Enter or exit system setup menu
g
•
k OPEN
• Open disc door to insert or remove
disc
l AV out 1 and 2
• Audio/Video output jacks
m DC OUT
• DC power output to the two screens
n DC IN
• Power supply socket
Overview of the displays
Headphones jack
h – VOL +
• Adjust headphone volume
i POWER
• Turn DVD player on/off
j POWER/IR
• Power/Remote sensor indicator
a
c
b
f
g
h
d
e
a DISPLAY
• Setup screen display
b POWER ON/OFF
• Turn the screen on/off
c
d
•
Adjust display value of the screen
Overview of the remote
control
1
DVD MENU
11
TITLE
12
2
3
OSD
4
13
5
•
Headphone jack
e – VOL +
• Adjust volume
f DC IN
• Power supply from the DVD player
g Audio In L(left) and R(right)
• Audio/Video input jacks
h VIDEO IN
• Video input jack
6
MUTE
14
7
8
15
9
10
16
a SETUP
• Enter or exit system menu
b
•
•
, OK
Move cursor up / down / left / right.
Confirms selection.
c OSD
• Access available functions
d
•
Skip to previous chapter, track or title.
e PLAY/PAUSE
• Start / pause / resume play
f MUTE
• Turn off sound
g Numeric Keypad 0 - 9
• Input numbers.
h SUBTITLE
• Select a subtitle language for DVD disc.
i RETURN
• Return to the PBC (playback control)
menu of VCD disc
j A-B
• Setup repeated play of a specific section
k DVD MENU
• Return to main menu of DVD disc
l TITLE
• Return to title menu of DVD disc
m
•
Skip to the next chapter, track or title
n STOP
•
Stop play
o AUDIO
• Select an audio language when playing
a DVD isc or select an audio mode
(Stereo, Mono-Left or Mono-Right)
when playing a VCD/CD disc
p ZOOM
• Enlarge or reduce picture or active
image size
3 Get started
1
2
Caution
Strap the car pouches over your car seat
headrest.
Insert the DVD player and the two screens
into the pouches.
• Use the controls only as stated in this user manual.
A
B
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial numbers. Find the model
number and serial number of this player at the
back or the bottom of your player. Write these
numbers here:
Model No. __________________________
Serial No. ___________________________
Preparation
To use the player in a car, attach the player and
the two screens to the back of the front seat
headrests.
B
3
Close the buckle and adjust the belt until it
fits tightly around the headrest.
Connect audio/video cables
Connect power
Note
• Match the color of the AV cable with the jacks: the yellow
cable is for the yellow video jack, the red/white cable is for
the red/white audio jacks.
1
Connect AV cable to the main unit and to
the screen.
Caution
• Risk of product damage! Ensure that the power supply
•
1
2
3
4
voltage corresponds to the voltage printed on the back or
the underside of the player.
Risk of electric shock! When you unplug the AC adaptor,
always pull the plug from the socket. Never pull the cord.
Connect the single-connector end of the
power cord to the DC OUT jack of the
main unit.
Connect one end of the double-connector
end of the power cord to the DC IN jack of
one screen.
Repeat step 2 with the other screen.
Connect the power:
•
To connect power from inside a car:
Connect the car adaptor cable to the
DC IN jack of the main unit and to the
car cigarette lighter socket.
Install remote control batteries
Caution
• Risk of explosion! Keep batteries away from heat, sunshine
or fire. Never discard batteries in fire.
• Risk of decreased battery life! Never mix different brands
or types of batteries.
Car Cigarette Lighter Socket
• Risk of product damage! When the remote control is not
used for long periods, remove the batteries.
• Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
•
To connect power from household
power sources: Connect the AC adaptor
cable to the DC IN jack of the main unit
and to the power outlet.
For first-time use:
1
Remove the protective tab to activate the
remote control batteries.
To replace the remote control batteries:
1
2
3
Open the battery compartment.
Insert 1 CR2025 3V lithium battery batteries
with correct polarity (+/-) as indicated.
Close the battery compartment.
Connect headphones
Caution
• Philips guarantees compliance with the maximum sound
power of its audio players as determined by relevant
regulatory bodies only with the original model of provided
headphones. In case this one needs replacement, we
recommend that you contact your retailer to order a
model identical to that of the original provided by Philips.
1
Plug the headphones into the
main unit or screen.
jack of the
Select display language
English is the default language for screen display.
You can change the display language.
1
2
3
Slide the POWER switch on the DVD player
to the ON position.
Press the POWER ON/OFF button on one
of the screens.
Press SETUP.
4
5
Select [General] > [Language].
Select the language, then press OK.
4 Use your player
•
•
Turn on
1
2
•
Slide the POWER switch on the DVD player
to the ON position.
Press the POWER ON/OFF button on the
screens.
To select the previous/next item, press
or
.
To start search within video/audio, press
and hold
or
. Briefly press
or
during search to adjust search speed.
For Video CDs or Super Video CDs:
Press RETURN to return to the
previous menu.
Adjust volume
Play discs
For headphones connected to the player:
1
2
3
1
Press OPEN on the main unit.
Insert the disc with label side facing up.
Push down to close the CD compartment.
» Play starts automatically.
•
•
•
If a menu appears, select an item, then
press OK to start play.
To stop play, press STOP .
To pause, press PLAY/PAUSE . Press
again to resume play.
1
Adjust the volume control on the player.
For screen speakers:
Adjust the volume control on the screen.
Play options
Tip
• When headphones are connected, no sound emits from
the screen speakers.
Select audio language
For DVDs that contain two or more audio
languages.
Adjust display
1
2
1
During play, press AUDIO repeatedly until
the language is selected.
Press DISPLAY on the screen repeatedly to
select:
• [Brightness]: adjust the brightness ( )
of the screen
• [Contrast]: adjust the contrast ( ) of
the screen
• [Display ratio] : select 16:9 display
mode ( ) or 6:9 display mode ( )
Select subtitle language
Press
1
2
3
4
or
to change value.
For DVDs that contain two or more subtitle
languages.
1
During play, press SUBTITLE repeatedly until
the language is selected.
Select DivX video subtitle
Press SETUP.
Select [Video] > [Mpeg-4 subtitles].
Select an option, then press OK to confirm.
Press SETUP to exit.
Select audio mode
When you play VCDs/CDs, you can select an
audio mode.
1
Press AUDIO repeatedly until the audio
mode is selected.
Zoom
For DVDs, VCDs and picture CDs, you can zoom
in and out for video images or pictures.
1
2
Press ZOOM repeatedly to zoom in and out.
When the video image or picture is enlarged,
press
to pan through it.
Repeat a section
You can repeat a specific section of audio/video
within a title/chapter/track (repeat A-B).
1
2
3
During play, press A-B to mark the start of
the section to repeat.
Press and hold
or
end of the section.
to search for the
Press A-B to mark the end of the section.
4
» The selected section plays repeatedly.
Press A-B to cancel.
Repeat one/all
1
2
During play, press OSD.
Select [Repeat 1] or [Repeat all], then press
OK to confirm.
Random play
For audio CDs and MP3 CDs only.
1
2
3
Press OSD.
Select [Shuffle], then press OK to confirm.
Select [On] or [Off], then press OK to
confirm.
Rotate pictures
For picture CDs only.
1
2
3
When you view the picture, press OSD.
Press
to rotate clockwise.
Press
to rotate counter-clockwise.
4
Press OSD again to exit.
5 Adjust settings
Playback control options
1
2
3
4
Press SETUP.
Select [General] > [PBC settings].
Select an option, then press OK to confirm.
Press SETUP to exit.
DivX Video-on-Demand code
DivX is a popular media technology created
by DivX, Inc.DivX media files contain highly
compressed video with high visual quality that
maintains a relatively small file size. DivX files can
also include advanced media features like menus,
subtitles, and alternate audio tracks. Many DivX
media files are available for download online, and
you can rent and purchase DivX videos with the
DivX VOD (Video on Demand) service. To use
this service, you need the DivX VOD registration
code of this player. For more information and
instructions, visit www.divx.com/vod.
1
2
3
4
Press SETUP.
Select [General] > [DivX (VOD)].
» The DivX registration code appears
Write down the number for future reference.
Press SETUP to exit.
“DivX, DivX” Certified, and associated logos
are trademarks of DivX, Inc. and are used under
license.
Offical DivX® Certified product. Plays all versions
of DivX® video (including DivX® 6) with
standard playback of DivX® media files.
Restrict access
1
2
3
Press SETUP.
Select [General] > [Parental].
Select a setting, then press OK to confirm.
4
5
Enter the password.
• If this is the first time you restrict access,
enter 9999 as the password.
Press SETUP to exit.
Set password
1
2
3
4
5
6
Press SETUP.
Select [General] > [Set password].
Enter the current password.
• If this is the first time you restrict access,
enter 9999 as the password.
Enter the new 4-digit password, then press
OK to confirm.
Enter the new password again, then press
OK to confirm.
Press SETUP to exit.
Return to default settings
•
Note
•
• When you return to default settings, the access restriction
password will not be reset.
1
2
3
Press SETUP.
Select [General] > [Factory settings], then
press OK.
» The settings return to their default
setting.
Press SETUP to exit.
Select TV display aspect ratio
Set the screen format according to how you want
the picture to appear on your TV:
1
2
Press SETUP.
Select [Video] > [TV Display], then select an
option:
• [16:9]: For widescreen TVs
3
4
[4:3 LB]: For normal TVs, for a widescreen picture. Black bars may appear
on the top and the bottom of the
screen.
[4:3 PS]: For normal TVs, for a full-height
picture. The sides of the picture may be
trimmed.
Press OK to confirm.
Press SETUP to exit.
Select video output format
The default video output format has been chosen
according to format that is broadcast in your
country. If the picture looks unusual, change the
video output.
1
2
3
4
Press SETUP.
Select [Video] > [TV Standard].
Select an option, then press OK to confirm.
Press SETUP to exit.
Select audio output
1
2
3
4
Press SETUP.
Select [Audio] > [Dolby].
Select an option, then press OK to confirm.
Press SETUP to exit.
Select digital audio output
If you connect the player to a sound system that
supports digital sound, select a compatible digital
audio output format.
1
2
3
4
6 Troubleshooting
Press SETUP.
Select [Audio] > [Digital (SPDIF)].
Select an option, then press OK to confirm.
Press SETUP to exit.
Warning
• Never remove the casing of this player.
To keep the warranty valid, never try to repair the
system yourself.
If you encounter problems when using this player,
check the following points before requesting
service. If the problem remains unsolved, go to
the Philips web site (www.Philips.com/support), or
contact Philips (see Contact information). When
you contact Philips, ensure that your player is
nearby and the model number and serial number
are available (see ‘Get started’ on page 26).
No power
Ensure that both plugs of the mains cord are
•
properly connected.
Ensure that there is power at the AC outlet.
•
Ensure that the battery is inserted correctly.
•
Ensure that the car adaptor is connected
•
correctly.
‘No signal’ is displayed
Ensure that the player is turned on.
•
Ensure that the AV cable is connected.
•
Distorted picture
Clean the disc. With a clean, soft, lint-free
•
cloth, wipe the disc outwards from the
center.
Make sure that the video output format of
•
the disc is compatible with the TV.
Change the video output format to match
•
your TV or program (see ‘Select video output
format’ on page 45).
The LCD is manufactured using high
•
precision technology. You may, however, see
tiny black points and/or bright points(red,
blue, green) that continuously appear on
the LCD. This is a normal result of the
manufacturing process and does not indicate
a malfunction.
No sound
Ensure that the AV cable is connected correctly.
Cannot play disc
Ensure the disc label is upwards.
•
•
Clean the disc. With a clean, soft, lint-free
cloth, wipe the disc outwards from the
center.
Check if the disc is defective by trying
•
another disc.
No response to the remote control
Ensure that the path between the remote
•
control and the player is clear from obstacles.
From a close distance, point the remote
•
control directly at the player.
Replace the remote control batteries.
•
The function does not work for this disc.
•
Refer to the disc instructions.
The player feels warm
When the player is in use for a long period
•
of time, its surface will be heated. This is
normal.
7 Product
information
Note
• Product information is subject to change without prior
notice.
Dimensions (player)
204 x 168 x 33 mm
(8.0 x 6.6 x 1.3 inches)
Dimensions (screen) 204 x 168 x 33 mm
(8.0 x 6.6 x 1.3 inches)
Weight (player)
1.9 kg / 4.2 pounds
Weight (screen)
1.9 kg / 4.2 pounds
Power supply
DC 12V 2.0A
Power Consumption <20W
Operating temperature 0 - 50°C
range
650nm
Laser wavelength
Video system
NTSC / PAL / AUTO