PoE-10 Single-port Power over Ethernet Injector User`s Guide

PoE-10
Single-port Power over Ethernet
Injector
User’s Guide
February 2004
PoE-10 Single-port Power over Ethernet Injector
Table of Contents
Copyright ......................................................................................................................... 2
Disclaimer ........................................................................................................................ 2
Trademarks ..................................................................................................................... 2
CE-Mark Warning.......................................................................................................... 2
FCC Statement ................................................................................................................ 2
Information for Canadian Users.................................................................................... 3
ZyXEL Limited Warranty ............................................................................................. 3
Syntax Conventions in this Guide.................................................................................. 4
Customer Support........................................................................................................... 4
About Your PoE-10......................................................................................................... 6
Packaging List............................................................................................................... 6
Key Features.................................................................................................................... 6
Front Panel LEDs............................................................................................................ 6
Description of LEDs ..................................................................................................... 6
Rear Panel and Connections .......................................................................................... 6
LAN 10/100M Ports...................................................................................................... 7
POWER Socket............................................................................................................. 7
Specifications ................................................................................................................... 8
Power Over Ethernet Injector RJ-45 Port Pin Assignments.......................................... 9
Troubleshooting .............................................................................................................. 9
1
PoE-10 Single-port Power over Ethernet Injector
Copyright
Copyright © 2004 by ZyXEL Communications Corporation.
The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in
a retrieval system, translated into any language, or transmitted in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written
permission of ZyXEL Communications Corporation.
Published by ZyXEL Communications Corporation. All rights reserved.
Disclaimer
ZyXEL does not assume any liability arising out of the application or use of any products, or software
described herein. Neither does it convey any license under its patent rights nor the patent rights of
others. ZyXEL further reserves the right to make changes in any products described herein without
notice. This publication is subject to change without notice.
Trademarks
Trademarks mentioned in this publication are used for identification purposes only and may be
properties of their respective owners.
CE-Mark Warning
In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
FCC Statement
This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause
undesired operations.
This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
If this equipment does cause harmful interference to radio/television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the
equipment and the receiver.
3. Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
4. Consult the dealer or an experienced
radio/TV technician for help.
Notice 1
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Certifications
1.
2.
Go to www.zyxel.com
Select your product from the drop-down list box on the ZyXEL home page to go to that product's
2
PoE-10 Single-port Power over Ethernet Injector
3.
page.
Select the certification you wish to view from this page.
Information for Canadian Users
The Industry Canada label identifies certified equipment. This certification means that the equipment
meets certain telecommunications network protective operation and safety requirements. The Industry
Canada label does not guarantee that the equipment will operate to a user's satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the
facilities of the local telecommunications company. The equipment must also be installed using an
acceptable method of connection. In some cases, the company's inside wiring associated with a single
line individual service may be extended by means of a certified connector assembly. The customer
should be aware that compliance with the above conditions may not prevent degradation of service in
some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility
designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company cause to request the user to disconnect the
equipment.
For their own protection, users should ensure that the electrical ground connections of the power utility,
telephone lines, and internal metallic water pipe system, if present, are connected together. This
precaution may be particularly important in rural areas.
Caution
Users should not attempt to make such connections themselves, but should contact the appropriate
electrical inspection authority, or electrician, as appropriate.
Note
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital
apparatus set out in the radio interference regulations of Industry Canada.
ZyXEL Limited Warranty
ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in
materials or workmanship for a period of up to two years from the date of purchase. During the
warranty period, and upon proof of purchase, should the product have indications of failure due to
faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or replace the defective
products or components without charge for either parts or labor, and to whatever extent it shall deem
necessary to restore the product or components to proper operating condition. Any replacement will
consist of a new or re-manufactured functionally equivalent product of equal value, and will be solely at
the discretion of ZyXEL.
This warranty shall not apply if the product is modified, misused, tampered with, damaged by an act of
God, or subjected to abnormal working conditions.
Note
Repair or replacement, as provided under this warranty, is the exclusive remedy of the purchaser. This
warranty is in lieu of all other warranties, express or implied, including any implied warranty of
merchantability or fitness for a particular use or purpose. ZyXEL shall in no event be held liable for
indirect or consequential damages of any kind of character to the purchaser.
Products must be returned Postage Prepaid. It is recommended that the unit be insured when shipped.
Any returned products without proof of purchase or those with an out-dated warranty will be repaired or
replaced (at the discretion of ZyXEL) and the customer will be billed for parts and labor. All repaired or
replaced products will be shipped by ZyXEL to the corresponding return address, Postage Paid (USA
and territories only). If the customer desires some other return destination beyond the U.S. borders,
the customer shall bear the cost of the return shipment. This warranty gives you specific legal rights,
and you may also have other rights that vary from state to state.
Registration
Register your product online for free future product updates and information at www.zyxel.com for
global products, or at www.us.zyxel.com for North American products.
3
PoE-10 Single-port Power over Ethernet Injector
Syntax Conventions in this Guide
The PoE-10 Single-port Power over Ethernet Injector may be called the “PoE-10” or “the power
injector” in this guide.
Customer Support
Please have the following information ready when you contact customer support:
•
Product model and serial number.
•
Warranty Information.
•
Date that you received your device.
•
Brief description of the problem and the steps you took to solve it.
4
PoE-10 Single-port Power over Ethernet Injector
METHOD
SUPPORT E-MAIL
SALES E-MAIL
TELEPHONE1
FAX
1
WEB SITE
REGULAR MAIL
FTP SITE
LOCATION
Worldwide
support@zyxel.com.tw +886-3-578-3942
www.zyxel.com
www.europe.zyxel.com
ftp.zyxel.com
sales@zyxel.com.tw
North
America
Germany
France
support@zyxel.com
+886-3-578-2439
ftp.europe.zyxel.com
+1-800-255-4101
www.us.zyxel.com
+1-714-632-0882
sales@zyxel.com
+1-714-632-0858
ftp.us.zyxel.com
support@zyxel.de
+49-2405-6909-0
www.zyxel.de
sales@zyxel.de
+49-2405-6909-99
info@zyxel.fr
+33 (0)4 72 52 97 97 www.zyxel.fr
+33 (0)4 72 52 19 20
Spain
Denmark
Norway
Sweden
Finland
1
support@zyxel.es
+34 902 195 420
sales@zyxel.es
+34 913 005 345
support@zyxel.dk
+45 39 55 07 00
sales@zyxel.dk
+45 39 55 07 07
support@zyxel.no
+47 22 80 61 80
sales@zyxel.no
+47 22 80 61 81
support@zyxel.se
+46 31 744 7700
sales@zyxel.se
+46 31 744 7701
support@zyxel.fi
+358-9-4780-8411
sales@zyxel.fi
+358-9-4780 8448
ZyXEL Communications
Corp.
6 Innovation Road II
Science Park
Hsinchu 300
Taiwan
ZyXEL Communications Inc.
1130 N. Miller St.
Anaheim
CA 92806-2001
U.S.A.
ZyXEL Deutschland GmbH.
Adenauerstr. 20/A2 D-52146
Wuerselen
Germany
ZyXEL France
1 rue des Vergers
Bat. 1 / C
69760 Limonest
France
www.zyxel.es
ZyXEL Communications
Alejandro Villegas 33
1º, 28043 Madrid
Spain
www.zyxel.dk
ZyXEL Communications A/S
Columbusvej 5
2860 Soeborg
Denmark
www.zyxel.no
ZyXEL Communications A/S
Nils Hansens vei 13
0667 Oslo
Norway
www.zyxel.se
ZyXEL Communications A/S
Sjöporten 4, 41764 Göteborg
Sweden
www.zyxel.fi
ZyXEL Communications Oy
Malminkaari 10
00700 Helsinki
Finland
“+” is the (prefix) number you enter to make an international telephone call.
5
PoE-10 Single-port Power over Ethernet Injector
About Your PoE-10
The PoE-10 Single-port Power over Ethernet injector is a one-port power injector,
designed for use with 10/100 BaseT Ethernet networks. The PoE-10 injects DC
power through the unused twisted-wires (pairs 4/5 and 7/8) of a standard 8-pin
CAT 5 cable. This allows increased flexibility in the locating of a power over
Ethernet (PoE) enabled device by eliminating the need for a nearby power source.
Packaging List
The following items come with your PoE-10.
This User’s Guide
One Power Adaptor
One straight-through Ethernet cable
Key Features
One RJ-45, 10/100 Mbps PoE-enabled port.
Ensures a constant power supply to a PoE-enabled device.
Automatically detects if the connected device is PoE-enabled to avoid
sending power to a non-PoE device.
Front Panel LEDs
The LEDs on the front panel of the PoE-10 are shown next.
Description of LEDs
COLOR
STATUS
PWR
LED
Green
LNK
Green
On
Off
On
Off
Flashing
MEANING
Power is being supplied to the PoE-10.
No power is being supplied to the PoE-10.
The PWR&DATA port is connected and sending
power to an Ethernet device.
No Ethernet connection is present.
The connected Ethernet device is not
PoE-enabled or is malfunctioning.
Rear Panel and Connections
The rear panel and connections of the PoE-10 are shown next. All connections
6
PoE-10 Single-port Power over Ethernet Injector
are located on the rear panel.
LAN 10/100M Ports
The PoE-10 has two LAN ports. The PWR&DATA port delivers power to your
PoE-enabled device. Use a straight-through Ethernet cable to connect the
PWR&DATA port to your PoE-enabled device.
The DATA port does not deliver power. Use an Ethernet cable to connect the
PoE-10’s DATA port to the LAN.
The maximum Ethernet cable length is 100m.
POWER Socket
WARNING: Use only the included power adaptor. It is suitable for
desktop use. Use of another power adaptor may damage the
PoE-10.
Connect the female end of the power adaptor to the PoE-10’s POWER socket.
Connect the female end of the power cord to the power adaptor and the male end
to a power source (wall outlet or power strip).
7
PoE-10 Single-port Power over Ethernet Injector
Specifications
2
Compatibility
Compatible with certain ZyXEL PoE-enabled devices.2
Ports
1 DATA RJ-45 Ethernet port
1 PWR&DATA PoE injector RJ-45 Ethernet port
LEDs
1: PWR
1: LNK
Power Output
15.4 Watts maximum
Power Output Current
350 mA maximum
Weight
101g
Dimensions
74(W) x 102(D) x 30(H) mm
Power Adaptor
Input: 100 - 240V AC, 50/60Hz
Output: 48V .5A
Power Consumption
20 Watts maximum
Operating
Temperature
5 – 50 degrees Celsius (41 – 122 degrees Fahrenheit)
Operational Humidity
10% - 90%
EMI and Safety
FCC Class B, CE, CSA
The ZyAIR B-3000, B-420 and G-3000 models at the time of writing.
8
PoE-10 Single-port Power over Ethernet Injector
Power Over Ethernet Injector RJ-45 Port Pin Assignments
PIN NO
1 2 3 4 5 6 7 8
RJ-45 SIGNAL ASSIGNMENT
1
Output Transmit Data +
2
Output Transmit Data -
3
Receive Data +
4
Power +
5
Power +
6
Receive Data -
7
Power -
8
Power -
Troubleshooting
Make sure you have securely attached the proper cables to the proper ports.
Refer to the Rear Panel and Connections section for this information. If your
PoE-10 still does not work properly, refer to the table shown next.
PROBLEM
CORRECTIVE ACTION
No LEDs are on when
I connect the PoE-10.
Check to see that the enclosed power adapter is properly
connected to the PoE-10 and an appropriate power source.
Make sure the power source is on and functioning properly.
If the problem persists, your power adaptor may have
malfunctioned. Contact your local distributor.
The LNK LED is not
on.
Check to see that the Ethernet cables are connected properly
and that you are using the correct type of cable. Refer to the
Rear Panel and Connections section for this information.
If the problem persists, contact your local distributor.
The LNK LED is
flashing.
Make sure that the connected Ethernet device is PoE-enabled
and is not malfunctioning.
If the problem persists, try connecting a different PoE-enabled
device to the PoE-10’s PWR&DATA port.
The PoE-10 can send Ethernet traffic to a device that is not
PoE-enabled, but not power.
Power is not being
supplied to my
PoE-enabled device.
Ensure that the Ethernet cable connecting the PoE-enabled
device to the PoE-10’s PWR&DATA port is securely attached.
Make sure the PoE-10 is connected to an appropriate power
source and that the power source is on and functioning
properly.
9