- Vehicles & accessories
- Motor vehicle electronics
- Car navigation systems
- Pioneer
- CNDV 110 MT
- Operation manual
advertisement
Operation Manual Addendum
2012 DVD NAVIGATION UPGRADE DISC
CNDV-110MT
This software upgrade will result in changes to certain features and availability of information. While the changes are intended to improve the overall user experience for most users, Pioneer and its licensors disclaim any warranty or liability for damages in connection with such changes.
English
<CRB3945-A>1
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,
Kanagawa 212-0031, JAPAN
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
<KYTZX> <12E00000>
© 2012 PIONEER CORPORATION.
All rights reserved.
Printed in Belgium
<CRB3945-A>
EU
13-MAN-CNDV-110-GB
<CRB3945-A>2
Precaution
! Read the entire manual before upgrading the programme of your navigation system.
! The screens shown in the examples may differ from the actual screens.
The actual screens may be changed without notice for performance and function improvements.
Models to be upgraded
This package can upgrade the software programme and database of the following models:
AVIC-D3, AVIC-X3 II , AVIC-X3, AVIC-X1BT, AVIC-
X1R, AVIC-X1
For customers using AVIC-X1R,
AVIC-X1BT, CNDV-60M or CNDV-
70M
Only the map database changes to the latest data (all the operations are the same before).
Even if you upgrade AVIC-X1R with this disc, the following AV functions do not become the same as AVIC-X1BT.
! The functions on the hardware buttons
! Hands-free phoning with Bluetooth wireless technology (TEL source)
! The functions for iPod
The other operations are essentially the same as those at the time you purchased the hardware. Use Operation Manual included in the hardware package as your primary reference.
Manual overview
This manual is a supplementary document that summarises the points that will be renewed after upgrading your navigation system by using CNDV-110MT.
For customers using AVIC-D3,
AVIC-X3, AVIC-X3 II , CNDV-80MT,
CNDV-90MT or CNDV-100MT
By upgrading the navigation system with this disc, following points are changed.
! Map database
! Background images (Only for AVIC-D3)
The other operations are essentially the same as those at the time you purchased the hardware. Use Operation Manual included in the hardware package as your primary reference.
For customers using AVIC-X1
By upgrading AVIC-X1 with this disc, many changes will take place including changes to the menu configuration. For the operations other than those described in this manual, obtain the Operation Manual for AVIC-X1R and use it as your primary reference.
Even if you upgrade AVIC-X1 with this disc, the following AV functions do not become the same as AVIC-X1BT.
! The functions on the hardware buttons
! Hands-free phoning with Bluetooth wireless technology (TEL source)
! The functions for iPod p If you have already upgraded your AVIC-X1 by using CNDV-50MT, you do not need to obtain the Operation Manual for AVIC-X1R.
Use the Operation Manual supplied with
CNDV-50MT as your primary reference.
Obtain the manual by downloading it via Web
Visit us at the following site: http://www.pioneer.eu
p Download the manual if desired.
Engb
<CRB3945-A>3
Precaution Licence agreement
If you cannot get the manual via Web
Obtain the manual by
! sending an E-mail to: [email protected]
! writing a letter to:
Pioneer Europe NV, European Service Division
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
Be sure to read the following descriptions
Licence agreement
This provides a licence agreement of this software. Be sure to read this before using the software.
About the database
This provides some notes for the map database and the date when it was recorded.
Other precautions
This provides the important precautions for using this software.
PIONEER CNDV-110MT
THIS IS A LEGAL AGREEMENT BETWEEN
YOU, AS THE END USER, AND PIONEER
CORP. (JAPAN) (
“PIONEER”). PLEASE READ
THE TERMS AND CONDITIONS OF THIS
AGREEMENT CAREFULLY BEFORE USING
THE SOFTWARE INSTALLED ON THE
PIONEER PRODUCTS. BY USING THE SOFT-
WARE INSTALLED ON THE PIONEER PRO-
DUCTS, YOU AGREE TO BE BOUND BY THE
TERMS OF THIS AGREEMENT. THE SOFT-
WARE INCLUDES A DATABASE LICENCED BY
THIRD PARTY SUPPLIER(S) (
“SUPPLIERS”),
AND YOUR USE OF THE DATABASE IS COV-
ERED BY THE SUPPLIERS
’ SEPARATE
TERMS, WHICH ARE ATTACHED TO THIS
AGREEMENT (refer to
TERMS AND CONDI-
TIONS FOR THE TOMTOM DATA). IF YOU DO
NOT AGREE WITH ALL OF THESE TERMS,
PLEASE RETURN THE PIONEER PRODUCTS
(INCLUDING THE SOFTWARE, AND ANY
WRITTEN MATERIALS) WITHIN FIVE (5) DAYS
OF RECEIPT OF THE PRODUCTS, TO THE
AUTHORISED PIONEER DEALER FROM
WHICH YOU PURCHASED THEM.
1 GRANT OF LICENCE
Pioneer grants to you a non-transferable, nonexclusive licence to use the software installed on the Pioneer products (the
“Software”) and the related documentation solely for your own personal use or for internal use by your business, only on such Pioneer products.
Engb
<CRB3945-A>4
Licence agreement
You shall not copy, reverse engineer, translate, port, modify or make derivative works of the
Software. You shall not loan, rent, disclose, publish, sell, assign, lease, sublicence, market or otherwise transfer the Software or use it in any manner not expressly authorised by this agreement. You shall not derive or attempt to derive the source code or structure of all or any portion of the Software by reverse engineering, disassembly, decompilation, or any other means. You shall not use the Software to operate a service bureau or for any other use involving the processing of data for other persons or entities.
Pioneer and its licensor(s) shall retain all copyright, trade secret, patent and other proprietary ownership rights in the Software. The
Software is copyrighted and may not be copied, even if modified or merged with other products. You shall not alter or remove any copyright notice or proprietary legend contained in or on the Software.
You may transfer all of your licence rights in the Software, the related documentation and a copy of this Licence Agreement to another party, provided that the party reads and agrees to accept the terms and conditions of this Licence Agreement.
2 DISCLAIMER OF WARRANTY
The Software and related documentation are provided to you
“AS IS”. PIONEER AND ITS LI-
CENSOR(S) (for the purpose of provisions 2 and 3, Pioneer and its licensor(s) shall be collectively referred to as
“Pioneer”) MAKES AND
YOU RECEIVE NO WARRANTY, WHETHER EX-
PRESS OR IMPLIED, AND ALL WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR
ANY PARTICULAR PURPOSE ARE EX-
PRESSLY EXCLUDED. SOME COUNTRIES DO
NOT ALLOW EXCLUSION OF IMPLIED WAR-
RANTIES, SO THE ABOVE EXCLUSION MAY
NOT APPLY TO YOU. The Software is complex and may contain some nonconformities, defects or errors. Pioneer does not warrant that the Software will meet your needs or expectations, that operation of the Software will be error free or uninterrupted, or that all nonconformities can or will be corrected. Furthermore, Pioneer does not make any representations or warranties regarding the use or results of the use of the Software in terms of its accuracy, reliability or otherwise.
3 LIMITATION OF LIABILITY
IN NO EVENT SHALL PIONEER BE LIABLE
FOR ANY DAMAGES, CLAIM OR LOSS IN-
CURRED BY YOU (INCLUDING, WITHOUT LIM-
ITATION, COMPENSATORY, INCIDENTAL,
INDIRECT, SPECIAL, CONSEQUENTIAL, OR
EXEMPLARY DAMAGES, LOST PROFITS, LOST
SALES OR BUSINESS, EXPENDITURES, IN-
VESTMENTS, OR COMMITMENTS IN CON-
NECTION WITH ANY BUSINESS, LOSS OF
ANY GOODWILL, OR DAMAGES) RESULTING
FROM THE USE OF OR INABILITY TO USE
THE SOFTWARE, EVEN IF PIONEER HAS
BEEN INFORMED OF, KNEW OF, OR SHOULD
HAVE KNOWN OF THE LIKELIHOOD OF
SUCH DAMAGES. THIS LIMITATION APPLIES
TO ALL CAUSES OF ACTION IN THE AGGRE-
GATE, INCLUDING WITHOUT LIMITATION
BREACH OF CONTRACT, BREACH OF WAR-
RANTY, NEGLIGENCE, STRICT LIABILITY, MIS-
REPRESENTATION, AND OTHER TORTS. IF
PIONEER
’S WARRANTY DISCLAIMER OR
LIMITATION OF LIABILITY SET FORTH IN THIS
AGREEMENT SHALL OR FOR ANY REASON
WHATSOEVER BE HELD UNENFORCEABLE
OR INAPPLICABLE, YOU AGREE THAT
PIONEER
’S LIABILITY SHALL NOT EXCEED
FIFTY PERCENT (50 %) OF THE PRICE PAID BY
YOU FOR THE ENCLOSED PIONEER PRO-
DUCT.
Engb
<CRB3945-A>5
Licence agreement
Some countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty disclaimer and limitation of liability shall not be applicable to the extent that any provision of this warranty is prohibited by any country or local law which cannot be pre-empted.
4 EXPORT LAW ASSURANCES
You agree and certify that neither the Software nor any other technical data received from
Pioneer, nor the direct product thereof, will be exported outside the country or district (the
“Country”) governed by the government having jurisdiction over you (the
“Government”) except as authorised and as permitted by the laws and regulations of the Government. If the
Software has been rightfully obtained by you outside of the Country, you agree that you will not re-export the Software nor any other technical data received from Pioneer, nor the direct product thereof, except as permitted by the laws and regulations of the Government and the laws and regulations of the jurisdiction in which you obtained the Software.
5 TERMINATION
This Agreement is effective until terminated.
You may terminate it at any time by destroying the Software. The Agreement also will terminate if you do not comply with any terms or conditions of this Agreement. Upon such termination, you agree to destroy the Software.
6 MISCELLANEOUS
This is the entire Agreement between Pioneer and you regarding its subject matter. No change in this Agreement shall be effective unless agreed to in writing by Pioneer. If any provision of this Agreement is declared invalid or unenforceable, the remaining provisions of this Agreement shall remain in full force and effect.
Engb
<CRB3945-A>6
Licence agreement
TERMS AND CONDITIONS FOR THE TOMTOM DATA
Licence agreement Licence agreement
Engb
<CRB3945-A>7
Engb
<CRB3945-A>8
Engb
<CRB3945-A>9
Other precautions
About the database
About the data for the map database
! Modifications related to roads, streets/highways, terrain, construction and other things before/during the development period may not be reflected in this database. Inevitably, those modifications after that period are not reflected in this database.
! Regardless of existing and newly-built things, the data may be different from the actual condition.
! For details about the map coverage of this navigation system, refer to the information on our website.
! It is strictly prohibited to reproduce and use any part or the whole of this map in any form without permission from the copyright owner.
! If the local traffic regulations or conditions deviate from this data, follow the local traffic regulations (such as signs, indications, etc.) and conditions (such as construction, weather, etc.).
! The traffic regulation data used in the map database applies only to standard sized passenger vehicles. Note that regulations for larger vehicles, motorbikes, and other non-standard vehicles are not included in the database.
! TomTom Map Version, Rel. 06/2011.
In case of trouble
Should the navigation system fail to operate properly, contact your dealer or nearest authorised Pioneer Service Station.
Visit our website
Visit us at the following site: http://www.pioneer.eu
! Register your product. We will keep the details of your purchase on file to help you refer to this information in the event of an insurance claim such as loss or theft.
! We offer the latest information about
PIONEER CORPORATION on our website.
! © 2012 TomTom. All rights reserved. Tom-
Tom and the TomTom logo are registered trademarks of TomTom N.V.
! © 2012 INCREMENT P CORP. ALL RIGHTS
RESERVED.
Engb
<CRB3945-A>10
Renewed points through this upgrade
If you upgrade your navigation system by these discs, the system will have the following changes.
Renewed points for all models
Renewal Map database
The Map database will be changed.
Wide variety of facility information for Points of
Interest (POI) search
Approximately 2 million POIs are included in the database.
! The categories that you can use for voice recognition also will be changed. To know the categories that you can vocalize, see the displayed voice help.
! Some facilities icons used in POI Search,
Vicinity Search, and Overlay POI will be changed.
Configuration of data recorded on discs
Due to expanding the map database and the limitations of the disc
’s storage capacity, the following contents in the Central area disc have been changed.
! Search data for Austria and Denmark are deleted.
The search data for Austria and Denmark are deleted from the Central area disc and become available only on the East area disc. To search maps of Austria or Denmark, use the East area disc.
! The coverage of lower scale maps on the Central area disc is reduced.
The coverage of lower scale maps of the northern and eastern borders on the Central area disc is reduced.
The database and lower scale maps stored on each disc are as follows:
Triple Disc
This package is adopted
“Triple Disc” system so as to contain larger database and expanded coverage area; for the west, for the central, and for the east.
You can use a disc according to current location or destination, so that you can get comfortable operation at the long-distance navigation.
West area disc Central area disc
East area disc
Engb
<CRB3945-A>11
Renewed points through this upgrade
Note for cross-disc routing
If your current location and the destination are stored on different discs, it is necessary to change discs on the way.
In the case of such cross-disc routing, the following procedure is recommended.
1 Insert the disc containing the destination you want to set.
2 Search for the destination and set as your destination.
3 After route calculation finished, remove the current disc.
4 Insert the disc containing your current location.
p The navigation system reboots automatically remembering your destination and route set.
p To play DVD-video or CD, remove the DVD
Map Disc after the “Memory navi indicator” stops flashing.
5 Drive toward your destination.
p When you approach the areas not stored on the current disc, the navigation system informs you of approaching that area. Replace the disc at that time.
p Removing the disc and inserting another disc causes the navigation system to automatically restart and reload the new route.
(This automatic
“Reroute” operation cannot be cancelled.)
Renewed points for AVIC-
X1 or AVIC-X1R
Changes to appearance
The appearance of the navigation menu and
AV menu will change as follows:
Navigation menu
AV menu
Renewed points for AV source
Source icon
The icon design for each source will be changed.
[ESC] touch key
The name of some of the touch keys will be changed from [ ESC] to [HIDE].
Renewed point in the MP3 operation screen
The folder icon will be added to the [ UP] touch key.
The file extension (.mp3) will be displayed after a track in the track list display and detail Information display. (The extension may not be displayed if the file name is long.)
Engb
<CRB3945-A>12
Renewed points through this upgrade
Easy operation for expanded coverage (Country selection table)
The screen to select a country you want to search during a search step (
“Country selection table
”) will be changed to a table format to comply with expanded coverage area. Select a country you want to search from the table.
Selected country
Country codes
Limitation of Functions for
Areas not Stored on the Disc
For areas not stored on the disc, the functions will operate as follows:
Displaying the map
! Maps with a scale of between 25 m and
200 m cannot be displayed. (If the scale was set to between 25 m and 200 m, it is automatically switched to 500 m.)
! When driving with Mixed Mode, St.List
Mode or Driver
’s View, upon entering an area not stored on the disc the display automatically switches to Map Mode.
(When the vehicle reenters an area stored on the disc, the display returns to the previous map mode except for Driver
’s View.)
Destination search
! You cannot search a destination in an area not stored on the disc using Address
Search, POI Search, Vicinity Search or
Postal Code Search.
! If you cannot search in a currently selected country, the system may forcibly switch to the country selection screen.
! A Motorway Search covers all areas, regardless of the disc on which the information is stored.
! If a Vicinity Search is performed on the border of an area not stored on the disc, the system will not necessarily select the nearest facility. (The search will take place only within the range of areas stored on the disc.)
Guidance
! When your vehicle approaches an area not stored on the disc, you will be notified three times: when the distance to the area not stored on the disc is 20 km (12 miles),
10 km (6 miles) and 5 km (3 miles) respectively. When your vehicle enters that area, a caution is given.
! In the areas not stored on the disc, only guidance for reaching the destination is provided. No other guidance is given.
! If a route calculation is operated within an areas not stored on the disc, the route might not be set from the streets you are currently driving. Also, if you set the destination in an area not stored on the disc of the disc, the system may not be able to set the route up to the destination.
! If the vehicle deviates from the set route in an area not stored on the disc, the Auto Reroute function will not work.
! Even if “Close-up of Junction” is “On”, the display will not switch to an enlarged map of the junction.
! Even if you drive on the motorway, lane information, motorway exit numbers and motorway signs will not be displayed.
Engb
<CRB3945-A>13
Renewed points through this upgrade
Route information
! If the set route goes through an area not stored on the disc, no route profile for that area will be displayed. (If the set route traverses both an area not stored on the disc and area stored on the disc, only the route profile within the area stored on the disc will be displayed.)
! Route scrolling for an area not stored on the disc is possible only with a map scale of 500 m or above.
! Yellow lead of the navigation system or the vehicle battery is disconnected.
! RESET button is pressed.
! Navigation software is updated.
p In these circumstances, the system will automatically try to recover the deleted information, but data can be recovered only for areas stored on the disc. For items that could not be recovered, a recovery process will begin when you set another disc.
Light grey touch panel key
Other function limitations
Memory mode
! Only data for areas stored on the disc can be memorised. (Data for areas not stored on the disc cannot be memorised.)
! If the vehicle enters an area not stored on the disc, preparation for memory navi mode will have to be redone after the vehicle returns to an area stored in the disc.
(Preparation for the memory navi mode starts from the location where the vehicle re-entered the area stored on the disc.)
Avoid area
An area not stored on the disc cannot be set as an Area to Avoid.
p A set Areas to Avoid may be deleted when the software is updated. If this happens, the system will automatically try to recover the deleted information, but data can be recovered only for areas stored on the disc.
For items that could not be recovered, a recovery process will begin when you set another disc.
Recovery process for memory navi and avoid area
The memorised area may be deleted in the following circumstances:
The function is not available during memory navi mode. Or, the function is not available for areas not stored on the disc.
Touching this button activates a message indicating that the function is not available.
In memory navi mode and/or when traversing an area not stored on the disc, selection of the scales is limited.
Engb
<CRB3945-A>14
Messages and how to react to them
The following messages are added to those of AVIC-X1R (CNDV-50MT):
Message
This area does not contain any
POI ’s of the selected type.
This country is not available on the disc. Please insert an appropriate disc.
Failed to make the route profile.
No route data can be stored. You should insert the disc that contains the map data of the current position.
•Scaling down.
•Scaling up.
• No map data available on this scale. Scaling up.
• No map data available on this scale. Scaling down.
Failure in the memory recovery process. Memory navigation is presently not possible.
This function is not available with the current map disc.
When
Vicinity Search cannot be performed because the searched location is in areas not stored on the
DVD Map Disc.
When countries not stored on the
DVD Map Disc are included in the search.
What to do
Replace the DVD Map Disc and perform Vicinity Search again.
Set the destination or way point(s) in the countries stored on the DVD
Map Disc, or replace the DVD Map
Disc and perform the search again.
Insert the DVD Map Disc and retry.
Failed to generate the route profile because the set route passes through areas not stored on the DVD
Map Disc.
The area to be set for [ Map in Memory] is “areas not stored on the DVD
Map Disc
”.
In the memory navi mode, if the DVD
Map Disc is inserted without changing the scale (only when the point is stored on the DVD Map Disc).
When the scale that had been previously displayed cannot be displayed for the following reasons:
• The disc was ejected and the system was changed to the memory navi mode.
• In the memory navi mode, the map was scrolled to outside the memory area. Or, the vehicle moved outside of the memory area.
• The map was scrolled to areas not stored on the DVD Map Disc. Or, the vehicle moved to unrecorded areas.
• The map was scrolled from unrecorded areas to the memory area. Or, the vehicle moved from unrecorded areas to the memory area.
Failed to complete the recovery of the memory area because the disc could not be read for some reason, resulting in deletion of the memory.
The current position is
“areas not stored on the DVD Map Disc ” and an attempt was made to zoom in to make the scale 500 m or more.
• Change the memory area to be set to “areas stored on the DVD Map
Disc
”.
• Insert the DVD Map Disc containing that area.
The scale automatically returns to the scale that was set in the DVD navi mode before being changed to the memory navi mode.
If the desired scale cannot be selected, insert the DVD Map Disc that contains that area and then change the scale.
• Clean the disc.
• Clean the DVD drive.
• Consult the Pioneer Local dealer if this message persists.
Zoom in again after the vehicle moves into an area stored on the
DVD Map Disc.
Or, replace the DVD Map Disc and try to zoom in again.
Engb
<CRB3945-A>15
Instructions for upgrading
The programme is installed to the navigation system using the application disc.
When installing the programme, you carry out the following operations. When all the setup procedures are completed, you can use the navigation system.
The screen images used in this section are
AVIC-X1R as an example.
CAUTION
You cannot go back to the previous (preupgrade) version of the application after the software upgrade is completed. Also, the map discs that were previously used cannot be used. Instead, use the CNDV-
110MT DVDs as your new map discs.
1 Park your vehicle in a safe place.
Leave the engine on, and make sure that the handbrake is applied.
2 Press EJECT button to remove the current disc.
When the upgraded programme has been found, installation of the programme starts immediately.
p If you cannot insert a disc completely or if an inserted disc is not recognised, check that the label side of the disc is up. Press
EJECT button to eject the disc, and check the disc for damage before inserting the disc again.
CAUTION
While this screen is visible, NEVER switch the ignition key position or turn off the power of navigation system.
When the installation is complete, the opening display appears.
Instructions for upgrading
4 Press the NAVI/AV button to change the navigation screen.
Some time is needed until navigation is ready.
5 Check the details of the caution message and touch [OK].
The map of your surroundings is displayed.
You can operate the navigation system by touching keys displayed on the screen as usual.
When upgrading AVIC-X1, perform the following procedure.
6 To set the time difference, touch [+] or
[
–].
8 To complete the setting, touch [Back].
The map of your surroundings appears.
3 Insert the new Pioneer DVD Map Disc into the appropriate slot.
p By upgrading AVIC-X1 or AVIC-X1BT with these discs, the same screen appears.
p By upgrading other models with these discs, the following opening display appears.
Engb
Time difference
The time difference between the time originally set in the navigation system (Central European Time) and the current location of your vehicle is shown. If necessary, adjust the time difference. Touching [ +] or [
–] changes the time difference display in one-hour increments. The time difference can be set from +3 to
–3 hours.
7 If necessary, set to summer time.
Summer time setting is off by default. Touch
[ Summer Time] to change the setting if you are in the summer time period.
Engb
<CRB3945-A>16 <CRB3945-A>17 <CRB3945-A>18
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement