PYLE Audio PLD184V Owner's Manual
Add to my manuals21 Pages
PYLE Audio PLD184V is a mobile video system that includes a built-in anti-theft flip down detachable panel and car DVD/VCD/CD/MP3 player with an AM/FM digital PLL tuning radio. The system utilizes auxiliary input function, parental control, remote control, and has an on-screen display function. It supports JPEG disc play and has multi-language options for audio, subtitles, and menus. The setup includes general setup, speaker setup, Dolby Digital setup, and preferences setup. The system includes a subwoofer and EQ function.
advertisement
PLD184V
OWNER'S MANUAL
Mobile Video System
+
-
Anti Theft Flip Down Detachable Panel
VFD Moving Display
Car DVD/VCD/CD/MP3 Player
AM/FM Digital Pll Tuning Radio
Auxiliary Input Function
Parental Control
Remote Control www.pyleaudio.com
CONTENTS
Safety Information.......................................................................................
2
Disc Notes ..................................................................................................
3
Installation ..................................................................................................
4
Electric Connection ....................................................................................
7
Remote Control ..........................................................................................
8
Basic Operation ........................................................................................
10
MP3/WMA/JPEG Disc Play .....................................................................
14
AUX Operation .......................................................................................
14
On-Screen Display Function ...................................................................
15
Multi-Audio Language Function ...............................................................
16
Multi-Subtitle Language Function ............................................................
16
Multi-Angle Function .............................................................................
16
Title Menu Function ...............................................................................
16
Setup .........................................................................................................
17
General Setup ........................................................................................
17
Speaker Setup .......................................................................................
19
Dolby Digital Setup ................................................................................
19
Preferences Setup .................................................................................
20
Defaults Table ........................................................................................
21
Specifications ...........................................................................................
22
Trouble Shooting ......................................................................................
23
1
SAFETY INFORMATION
CAUTION:
THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD
PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE .
HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE
THE DVD PLAYER CORRECTLY AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT
REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.
THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.Use of this copyright protection technology must be authorized by Macro vision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
REGION MANAGEMENT INFORMATION:
This DVD Player is designed and manufactured to respond to the Region
Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this
DVD Player, this DVD Player cannot play this disc.
2
DISC NOTES
Disc formats supported by this player
V I D E O
MP
CD-RW
3
DVD
12 cm disc
(Single-sided disc only)
Video CD
12 cm disc
CD
12 cm disc
MP3
12 cm disc
Note:
A disc may become somewhat scratched (although not enough to make it unusable) depending on your handle it and conditions in the usage environment.Note these scratches are not an indication of any problem with the player.
Label side up
Discs which cannot be played with this player
DVD-ROM
DVD-R/DVD-RAM
CDV
CD-G
Do not bend
Do not touch the underside of the disc
Handling and Cleaning
Dirt, dust, scratches and warping disc will cause misoperation.
Do not place stickers or make scratches on discs.
Do not warp discs.
A disc should always be kept in its case when not in use to prevent from damaging.
Do not place discs in the following places:
1.Direct sunlight
2.Dirty, dusty and damp areas
3.Near car heaters
4.On the seats or dashboard
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth slightly moistured with isopropyl (rubbing) alcohol. Never use solvents such as benzine, thinner or conventional record cleaners as they may mar the surface of the disc.
Wipe the disc from center toward the outside edge
Preparing New Discs with
Spots
Rough
A new disc may have rough edges on its inside and outside edges.If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc.Therefore, remove the r o u g h e d g e s i n a d v a n c e by using a ball point pen or pencil as shown on the right.To r e m o v e t h e rough edges, press the s i d e o f t h e pen or pencil against the inside and outside edges of the disc.
Rough spots on outside edge
Ball point pen or pencil
Rough spots on inside edge
3
INSTALLATION
NOTES:
Choose the mounting location where the unit will not interfere with the normal driving function of the driver.
Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly.
Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.
passenger if there is a sudden stop, like an emergency stop.
If installation angle exceeds 30 from horizontal, the unit might not give its optimum performance.
30
Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.
DIN FRONT/REAR-MOUNT
This unit can be properly installed either from "Front"(conventional DIN
Front-mount) or "Rear"(DIN Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis). For details, refer to the following illustrated installation methods.
4
INSTALLATION
HEX NUT
SPRING WASHER
PLAIN WASHER
TAPPING SCREW
DASH BOARD
METAL MOUNTING
STRAP
CONSOLE
SLIDE BRACKET
HOUSING
HEX BOLT
KEY PLATE
PLASTIC TRIM OUT
KEY PLATE
1.WHILE INSTALLING THE FRONT PANEL, PLEASE MOUNT THE LEFT SIDE FIRST,
AND MAKE THE DIRECTION HOLE ON THE FRONT PANEL AIM AT THE LEFT GUIDE
ON THE UNIT
2.THAN PUSH THE RIGHT SIDE TO MOUNT THE RIGHT GUIDE
3.PUSH IT TO INSTALL THE
FRONT PANEL COMPLETELY .
5
INSTALLATION
CAUTION: DO NOT INSTALL THE DETACHABLE PANEL BEFORE
CONNECTING THE WIRE.
1. The unit is designed for negative terminal of the battery which is connected to the vehicle metal. Please confirm it before installation.
2. If the car interior is extremely hot, as after being parked in the sun, do not use the player until the car has been driven for a while to cool off the interior.
3. Press the OPEN button to flip down the front panel (see fig.1), Slide the guide knob to remove the right side first, then take away the front panel. (see fig.2) and put it in the protective case (see fig.3) for safe keeping.
4. Install the front panel back into its bracket and then push it back to the position for playing (see fig.4).
FRONT PANEL
GUIDE KNOB
OPEN BUTTON
(FIG.1)
PROTECTIVE CASE
(FIG.2)
FRONT PANEL
(FIG.3)
6
FRONT PANEL
(FIG.4)
ELECTRIC CONNECTION
MAIN UNIT
ANTENNA CONNECTOR
IGNITION
SWITCH(B+)
RED
MEMORY
BACK-UP(B+)
YELLOW
CHOKE
BOX
GROUND(B-)
BLACK
AUTO
ANTENNA
BLUE
FUSE
AUX(optional)
RCA CABLE
VIDEO IN YELLOW
RCH IN RED
LCH IN WHITE
GREY SUBWOOFER
VIDEO OUT 2 YELLOW
COAXIAL OUT BROWN
RCH RED
REAR RCA OUTPUT
CABLE (optional)
FRONT RCA OUTPUT
CABLE
LCH WHITE
FRONT RCA RED R
VIDEO OUT 1 YELLOW
FRONT RCA WHITE L
(FOR RCA LINE OUT VERSION ONLY)
FRONT
Lch SPK.
WHITE
WHITE/BLACK
GREY
GREY/BLACK
FRONT
Rch SPK.
REAR
Lch SPK.
GREEN VIOLET
GREEN/BLACK VIOLET/BLACK
REAR
Rch SPK.
7
REMOTE CONTROL
15
14
13
11
22
6
4
19
7
20
23
BAND
3
16
1
2
5
17
18
21
8
9
10
12
1.First push to inside as the direction indicated by the arrow (See .
) And then Remove the battery holder as the direction indicated by the arrow
(See.
).
2.Replace the battery Set a new battery property with (+)side up as illustrated
(See.
) .
3.Insert the battery holder. Push in the holder to the original position
(See.
) .
1. Clk
2. Mode
3. Stop
4. Setup
5. Mo/st
6. Subtitle
Lo/dx
Display And Set The Clock.
Select Playback Mode.
Stops Playback.
Accesses The Setup Menu.
Select The Sound Mode.
Selects a subtitle language.
In radio mode, depress it for stronger signal.
Repeat chapter,track,title ,all.
Go to next chapter or track.
Change the Audio mode.
7. Repeat
8.
/
9. Sel
10. VOL+/-
11.
12.Menu
Sub
13.Band
14.
15.
(OSD)
16.Mute
17.Title
18.Slow
Adjusts volume level.
Selects an item in menu.
Accesses menu on a DVD disc.
press it to switch the
Subwoofer On or Off .
Select the desirec bands.
display the disc information.
Switches device On and Off.
Stars or Pause playback.
Press it to mute down sound.
Display title menu, if available
Changing for slow forward/
19.Angle
20.EQ
21.
/
22.Enter
23. 0 - 9 reverse playback motion
Changing of the view angle on multi-angle DVD disc.
turn to equalization function.
start forward/reverse rapidly.
Confirm the Track/Chapter.
Numeric buttons.
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal receiver).
Operation angle: About 30 degree in each the direction of the front of the
IR mark.
PREPARING THE REMOTE
CONTROL
INSERTING THE BATTERIES
8
BASIC OPERATION
1 5 14
+
-
17 13 16 15 6 7 8 9 10 11 18 22 4 12 3
20 21
2
19
EJ
1.OPEN BUTTON
Press it to flip down the front panel then you can insert the cd disc into the
CD compartment. And you can find the
(EJECT)button .Press it to eject the disc.
C.Treble:Press SEL button two times.
Adjust treble level by using VOL + / knob.
TREBLE -2
..........................
2-3.VOL+/VOL- & SEL BUTTON
Press it to change audio mode through volume, bass, treble, balance, and fader modes. Rotate VOL + /VOL- knob to adjust the selected mode.(The corresponding value will show on the display.)
A.Volume:Adjust volume level by using VOL + / VOL - knob..
Note: The unit is initially set to volume mode.
VOLUME 6
D.Balance:Press SEL button three times.
Adjust sound balance between left and right speakers by using VOL + / VOL knob.
Balance
-2
B.Bass:Press SEL button one time.
Adjust bass level by using VOL + / VOL knob.
E.Fader:Press SEL button four times.
Adjust sound balance between front and rear speakers by using VOL + /
VOL - knob.
Fader
0
BASS +8
..........................
9
BASIC OPERATION
4.BAND BUTTON
In RADIO mode, press the BAND button repeatedly to select bands in following order:
FM1 FM2 FM3
AM2 AM1
(For 2 Bands)
5.EQ BUTTON
Swing the knob in the direction of the
EQ to turn to equalization function and to select desired audio mode.
There are four kinds of mode as below:
JAZZ CLAS POP ROCK
6-7-8-9-10-11.PRESET STATION
A. To memorize the current frequency, press any one of the six preset buttons
[1-6] on the front panel or on remote controller hold for more than 2 seconds
B. To recall the preset memory, press one of the preset buttons [1-6].
C. Press 1/TOP button to select the first track/chapter to play.
a. In the state of VCD/CD/MP3 discs playing, press the button on the front panel to select the first track/chapter to play.(depend on the disc used VCD) b. In the state of DVD disc playing, the
1TOP button is not available.
D. Long press 2/RPT button to select repeat mode as follow.
DVD:
CHAPTER REPEAT ON TITLE REPEAT ON
REPEAT OFF
VCD/CD:
REP-ONE REP-ALL a.Continuously repeat at the current chapter/track, when selected
REP-ONE mode.
b.continuously repeat all chapter/track on the current disc, when select the
REPEAT ALL mode.
c.REPEAT feature does not support
VCD2.0 (with PBC ON).
E.Long press 3/INT button to scan disc.
a. In the state of VCD/CD disc playing, press the 3/INT button on front panel to play the previous 10 seconds part of each track/chapter on disc.
(depend on the disc used for VCD) b. In state of DVD/MP3 disc playing, the 3/INT button is not available.
F.Long press 4/RDM to play disc in random.
a. In the VCD/CD/MP3 disc playing, press the 4/RDM button on front panel to play in random
(depend on the disc used for VCD).
b. In the DVD disc playing, the 4/RDM button is not available.
12.AS/PS BUTTON
When shortly pressing the APS button on the front panel or the A/P button on the remote controller, the radio searches for each preset station. When the field strength level is more than the threshold level of stop level, the radio is holding at that preset number for few seconds with releasing mute, and then searches again.
In FM band, FM 1,FM 2 and FM 3 is checked one at a time When long pressing the APS or A/P button (more than 1 second), the radio searches from the current frequency and checks the signal strength level until 1 cycle search is finished. And then 6 strongest stations are preset to the corresponding preset number.
The AS operation is implemented in the each band of selected band. When the
AS operation is finished, the radio executes the preset scan.
10
BASIC OPERATION
13.MUTE BUTTON
Swing the knob in the direction of the
EQ to eliminate the sound immediately.
Swing it again to release this mode and recover previous volume level.
14.CLK BUTTON
Press it to change the display to clock display. Press it again to return to previous display.
In clock display, press and hold for about 2 seconds until the hour display flashes. Rotate VOL+/knob to adjust hours ,press CLK button to flash minute then Rotate VOL+/- knob to adjust minutes.
15.PWR BUTTON
Press it to switch the device ON or OFF.
16.
BUTTON
Pressing during playback will stop play temporary. Return to normal playback, press once again.
17.
/ BUTTONS
a. In DISC playback mode, briefly swing the knob in the direction of the / to skip the forward/back one track, press and hold 2 seconds to fast forwards/fast reverse.
The speed of rapid forward/reverse changes according to the disc as follow.
DVD:
Normal Playback 2x 4x 16x 100x
VCD/CD/MP3:
Normal Playback 2x 4x 8x
20.FLASHING LED
If the front panel is not on the main unit,
LED will be flashing.
21.RESET BUTTON
RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object.
The RESET button is to be activated for the following reasons: a. Initial installation of the unit when all wiring is completed.
b. All the function buttons do not operate.
c. Error symbol on the display.
Note:If press RESET button , the unit can't work yet, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the front panel.
22.ST BUTTON
Press ST button to select stereo or mono reception for radio stations.
Playing an Audio CD or
MP3/WMA file
This unit can play Audio CDs or Mp3/
WMA files recorded media.
MP3/WMA/Audio CD
Once you insert an MP3/WMA files recorded media or Audio CD, a menu appears on the TV screen. Press / to select a track/file then press ENTER and playback starts. You can use variable playback function.
C. In radio mode, swing the knob in the direction of the / ,to manually tune up or down for your desired station.
Press and hold for more than 2 seconds to automatically tune up or down for the stronger station.
4-track06.MP3
6..............MP3
+
-
1..............MP3
2..............MP3
............
............
00:03:36 2/146
ALL
18.MOD BUTTON
Press it repeatedly select Disc ,Aux In ,
Radio mode.
19.EJECT BUTTON
Press the eject button to eject the disc form the disc slot.
11
1 2 3 4
(1).Current track(file)(highlighted bar)
(2).Elapsed playing time of the current track
(3).Current track (file) number/total number of tracks(files) in the current folder
(4).Selected playback mode
BASIC OPERATION
Audio CD
List
1........TRACK1
+
2........TRACK1
3........TRACK1
4........TRACK1
-
Program
1........TRACK1
3........TRACK1
00:03:36 4/18
ALL
1 2 3 4
(1).Current track(file)(highlighted bar)
(2).Elapsed playing time of the current track
(3).Current track (file) number/total number of tracks(files) in the current folder
(4).Selected playback mode
Press REPEAT repeatedly to select the desired repeat mode.
1.REP-ONE: repeats the current track.
2
.REP-ALL repeats all the tracks on the list.
3. REP-OFF does not play repeatedly.
In the playback, use or to skip an item ahead or back.
Swing the knob and hold for more than 2 seconds in the direction of the
/ , or press
/
on the remote control to rapid forward/reverse.
PROGRAMMED PLAYBACK
The program function enables you to store your favorite tracks from any disc in the player memory.
1. Insert an Audio CD or MP3/WMA files recorded media. AUDIO CD or MUSIC menu appears.
2. Use
“list”, press + to Select a track on the to place the selected track on the “program” list. Repeat to place additional tracks on the list, then press the ENTER to confirm. If you want to add all tracks on the “Program”, list, press the
+ -
, and then press the
ENTER button to confirm.
12
3. Select the track you want to start playing on the “ program ” list.
4. Press the ENTER to start. Playback begins in the order in which you program
The tracks. Playback stops after all of the tracks on the “program” list have played once.
5. To resume normal playback from programed playback, select a track on the list and then press ENTER.
You can use variable playback functions
, refer to above CD/MP3.
Erasing A Track From
“program” List
1. During STOP mode. Use select the track that you wish to erase from the Program list.
2. Press
-
. Repeat step 1-2 to eras additional tracks on the list.
to
Erasing The Complete Tracks
From “Program” List
1. During STOP mode, use buttons to select the
--
.
2. Press the ENTER to confirm.
BASIC OPERATION
ON-SCREEN DISPLAY FUNCTION
This unit features GUI (Graphic User Interface) Menu Icons showing disc information(title/chapter/track number, elapsed playing time, audio/subtitle language, angle, and sound) and player information(repeat play, play mode, marker, etc,). Some icons only show the indicated information. Other icons allow the settings to be changed.
Press the OSD during playback.
[TV Screen]
For DVD GUI
FUNCTION
(Press / to select desired item)
SELECTION
METHOD
3/15
1/3
00:03:25
1.CH1
D
3/2.1
NONE
1/3
NORMAL
To show the current title number and to jump to the desired title number
To show the current chapter number and to jump to the desired chapter number.
To show the elapsed time and directly select scenes by the desired time.
To show the current audio soundtrack language, encoding method, changed number and to change the settings.
To show the current subtitle language and to change the settings.
To show the current angle number and to change the angle.
To show the current sound(NORMAL, or 3D
SURROUND) and to change the setting.
/
/
0-9 INPUT
ENTER
0-9 INPUT
ENTER
SKIP
0-9 INPUT
ENTER
/ , AUDIO
/ , SUBTITLE
/
, ANGLE
/
Press the OSD during playback.
[TV Screen]
For VCD/SVCD GUI
FUNCTION
(Press / to select desired item)
3/15
To show the current title number and to jump to the desired title number
00:03:25
NORMAL
To show the elapsed time and directly select scenes by the desired time.
To show the current sound(NORMAL, or 3D
SURROUND) and to change the setting.
SELECTION
METHOD
/
0-9 INPUT
ENTER
0-9 INPUT
ENTER
/
Note:For CD and MP3,press OSD button is not available.
13
BASIC OPERATION
MULTI-AUDIO LANGUAGE
FUNCTION
For DVD:
Press AUDIO during playback.
Each time the button is pressed, number of the audio soundtrack language changes on sequential order.
if the disc has multi-audio language .
1/3
ENGLISH
1/3
ENGLISH
MULTI-ANGLE FUNCTION(For
DVD only)
Press ANGLE during playback. Each time the button is pressed, number of the angle changes in sequential order.
if the disc has multi-angel views .
1/3
1
1/3
1
Ex: When the disc has 3 options
For VCD/CD:
Press AUDIO during playback.
It is possible to switch the sound between monaural and stereo sound.
MONO LEFT MONO RIGHT STEREO
RIGHT
RIGHT
RIGHT: To listen to the RIGHT audio channel.
LEFT: To listen to the channel.
LEFT audio
STEREO: To listen to normal stereo
(left/right) playback.
MULTI-SUBTITLE LANGUAGE
FUNCTION (For DVD only)
Press SUBTITLE during playback.
Each time the button is pressed, number of the subtitle language changes in sequential order.
If the disc has multi-subtitle language.
Ex: When the disc has 3 multi-angle views
TITLE MENU FUNCTION
A.
DVD: If the DVD has multiple titles recorded on the disc. It can select preferred title from the title menu to start playback.
A .Press TITLE during playback.
The title menu is display.
b .Press the cursor button shown in TV screen, select preferred title by the cursor button and confirmed
B.
by ENTER key.
VCD: Press TITLE button on the remote controller while the disc is playing, you can switch between
"PBC on"and "PBC off"mode.
1/3
ENGLISH
1/3
ENGLISH
Ex: When the disc has 3 options
14
SETUP
LANGUAGE SETUP
Disc Audio
LANGUAGE
Menu Language
Disc Subtitle
Disc Menu
English
Franais
Espanol
Magyar
Deutsch
Italiano
Polski
Portuguęs
Greek
Swedish
Czech
Dutch
PREV.
MOVE SELECT
1.Menu Language Setup
Select the preferred MENU language by using the cursor buttons.
LANGUAGE
Menu Language
Disc Audio
Disc Subtitle
Disc Menu
OFF
Original
English
Spanish
German
Italian
Portuguese
French
Russian
Chinese
Other.....
PREV.
MOVE SELECT
3.Disc Subtitle setup
Select the preferred DISC SUBTITLE language by using the cursor buttons.
LANGUAGE
Menu Language
Disc Audio
Disc Subtitle
Disc Menu
Original
English
Spanish
German
Italian
Portuguese
French
Russian
Chinese
Other.....
LANGUAGE
Menu Language
Disc Audio
Disc Subtitle
Disc Menu
Original
English
Spanish
German
Italian
Portuguese
French
Russian
Chinese
Other.....
PREV.
MOVE SELECT
2.Disc Audio Language
Select the preferred AUDIO soundtrack by using the cursor buttons.
PREV.
MOVE SELECT
15
4.Disc Menu lang type Setup
Select the preferred Disc Menu
Language by using the cursor buttons.
SETUP
DISPLAY SETUP
DISPLAY
TV Aspect
Display Mode
TV Output
4:3
16:9
TV Aspect
DISPLAY
Display Mode
TV Output
Letter box
Panscan
Wide SCR
PREV.
MOVE SELECT
1.TV ASPECT SETUP
This is to select the appropriate
Display Mode(Letter box or Pan scan
Wide screen) according to the connected TV set.
4:3LB(Letter Box)
Select this when the aspect ratio of your monitor is 4:3.While viewing a wide screen picture, the black bars appear on the top and the bottom of the screen.
4:3PS(Panscan)
Select this when the aspect ratio of your monitor is 4:3.
While viewing a wide screen picture, the black bars do not appear; however, the left and right edges of the pictures will not be shown on the screen.
16:9 TV(Wide Screen )
Select this when the aspect ratio of your monitor is 16:9.
PREV.
MOVE SELECT
Video
Material
4:3
Normal
TV Screen
4:3
Pan Scan Letter-box
Wide(16:9)
16:9
2.Display Mode Setup
This is to select the appropriate TV aspect (4:3 or 16:9) according to the connected TV set.
Letter Box (For 4:3 TV)
Played back in letterbox style.
(If connected to wide-screen TV, black bands appear at top and bottom of the screen.)
Panscan (For 4:3 TV)
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the left and right edges are cut off.)
Wide Screen (For 16:9 TV)
Select when a wide-screen TV set is connected.
16
SETUP
DISPLAY SETUP
DISPLAY
TV Aspect
Display Mode
TV Output
AUTO
PAL
NTSC
AUDIO
Dolby Digital
DTS
DRC
Digital Output
Bitstream
PCM
PREV.
MOVE SELECT
PREV.
MOVE SELECT
3.TV OUTPUT SETUP
This player can play discs recorded in either PAL or NTSC format.Select
NTSC format, when you connected to
NTSC TV.Select PAL format, when you connected to PAL TV.Select AUTO format, the player TV output format will according to the DVD disc format..
AUDIO SETUP
2.DTS Setup
Select the DTS between Bitstream and PCM.(Select this when connecting an amplifier or a decoder compatible with DTS)
AUDIO
Dolby Digital
DTS
DRC
Digital Output
Bitstream
PCM
AUDIO
Dolby Digital
DTS
DRC
Digital Output
ON
OFF
PREV.
MOVE SELECT
1.Dolby Digital Setup
Select the Dolby Digital between
Bitstream and PCM.(Select this when connecting an amplifier or a decoder compatible with DOLBY
DIGITIAL )
17
PREV.
MOVE SELECT
3.DRC Setup
Select the DRC between ON and OFF.
SETUP
AUDIO SETUP
AUDIO
Dolby Digital
DTS
DRC
Digital Output
ON
OFF
LOCK
Rating
Password
Country Code
Change
PREV.
MOVE SELECT
PREV.
MOVE SELECT
4.Digital Output
Select the DRC between ON and OFF.
LOCK SETUP
2.PASSWORD
Select the Change and press ENTER button. Type the old password (The initial factory code is
3351
) and key in 4 characters password now you want to use, and retype again to confirm key in correctly.
Rating
Password
LOCK
Country Code
Unlock
6
5
8(Adult)
7
4
3
2
1(kids)
LOCK
Rating
Password
Country Code U S
PREV.
MOVE SELECT
PREV.
MOVE SELECT
1.Rating Setup
Select suitable parental guidance by the cursor buttons and conformed by pressing ENTER button.
18
3.Country Code
Select suitable country code by the cursor buttons and conformed by pressing ENTER button.(Please key in the correctly password before select)
SETUP
OTHERS SETUP
OTHERS
Load Default
Screen Saver
Select
PREV.
MOVE SELECT
1.LOAD DEFAULT
Select it to become factory initial setting.
DEFAULTS TABLE
Language
Menu Language English
Disc Audio
Disc Subtitle
Original
Disc Menu
OFF
Original
Display
TV Aspect
Display Mode
TV Output
16:9
Wide screen
Auto
Bitstream Dolby Digital
Audio
DTS
DRC
Digital Output
Rating
PCM
ON
ON
Lock Setup
Password
Country Code
Others
Unlock
3351
U S
Load Default Select
Screen Saver ON
OTHERS
Load Default
Screen Saver ON
OFF
PREV.
MOVE SELECT
2.SCREEN SAVER SETUP
Select the Screen Saver output
ON/OFF.
19
TROUBLE SHOOTING
SYMPTOM
NO POWER
CAUSE
The car ignition switch is not on
The fuse is blown
Presence of disc inside the player.
DISC CANNOT
BE LOADED
OR EJECTED
Inserting the disc in reverse direction
The disc is extremely dirty or defective
Temperature inside the car is too high
SOLUTION
If the power supply is properly connected to the car accessory terminal,switch the ignition key to "ACC"
Replace the fuse
Remove the disc in the player, then put a new one
Insert the compact disc with the label facing upward
Clean the disc or try to play a new one
Cool off or until the ambient temperature return to normal
NO SOUND
THE RADIO
DOES NOT
WORK
Volume is in minimum
Wiring is not properly connected
The antenna cable is not connected
The signals are too weak
Adjust volume to a desired level
Check wiring connection
Insert the antenna cable firmly
Select a station manually
SPECIFICATIONS
GENERAL
SUPPLY VOLTAGE: 12V DC (11V-15V)
CURRENT CONSUMPTION: <10 A
SIGNAL SYSTEM:
Compositive video 1.0Vp-p 75
DISCS PLAYED:
(1)DVD-VIDEO Disc
5"(12 cm) single-sided, single-layer
5"(12 cm) single-sided, double-layer
(2)Compact Disc (CD-DA, VIDEO CD)
5"(12cm) disc
FM TUNER SECTION
Tuning Range.....................87.5-107.9MHz
IF Range............................10.7MHz
Usable sensitivity(30dB)......15dB
AM TUNER SECTION
Frequency Range................530-1710KHz
IF Range............................450KHz
Usable sensitivity(30dB)......45dB
AUDIO SIGNAL OUTPUT:
CHARACTERISTICS:
2ch&4ch line out
(1)Frequency Response
(2)S/N Ratio
20 Hz - 20 KHz
90 dB (JIS)
(3)Wow and Flutter
Below measurable limits
20
NOTE:
Specifications and design are subject to modification, without notice, due to improvements in technology.
88-V3840-09
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project