Radio Shack PLRDVD7 User's Manual

PLRDVD7
OWNER’S MANUAL
Mobile Video System
• Digital Audio Out-Coaxial
• DVD Player
• Multi Color TFT Monitor
• Multi-subtitle Languages Function
• Multi-audio Languages Function
• Multi-angle Function
• Parental Control
• Remote Control
www.pyleaudio.com
Protect the Disc Mechanism
Avoid inserting any foreign objects into
the slot of this player.
Failure to observe this may cause
malfunction due to the precise
mechanism of this unit.
FEATURES
Compatible with PAL DVD (Video
CD) and NTSC DVD (Video CD)
This player can play discs recorded in
either PAL or NTSC format.
• A single LSI chip now integrates all
major DVD playback circuit functions
including MPEG2 decoder, video D/A
converter, and audio decoders.
Use Authorized Service Centres
Do not attempt to disassemble or adjust
this precision product. Please refer to
the Service Centre list included with this
product for service assistance.
• L/R stereo analog audio outputs for
connection to existing head unit aux
inputs. Video output is composite
video.
For Installation
The unit should be installed in a
horizontal position with the front end up
at a convenient angle, but not more than
30°.
• Supplied remote handles
multi-function software (multi-language
audio-track/subtitle, multi-angle, multistory, etc.), plus all basic functions.
USE THIS PRODUCT SAFELY
When Driving
Keep the volume level low enough to be
aware of road and traffic conditions.
When Car Washing
Do not expose the product to water or
excessive moisture. This could cause
electrical shorts, fire or other damage.
When Parked
Parking in direct sunlight can produce
very high temperatures inside your
vehicle. Give the interior a chance to
cool down before starting playback.
Use the Proper Power Supply
This product is designed to operate with
a 12 volt DC, negative ground battery
system (the regular system in a North
American car).
2
CONTENTS
Safety Information ........................................................................................4
Disc Notes .....................................................................................................5
The Player ......................................................................................................6
Installation .....................................................................................................8
Replacing the Car Demo Lamp ...................................................................9
Electric Connection ....................................................................................10
Remote Control...........................................................................................11
Location and Function of Keys.............................................................................11
Preparing the Remote Control ..............................................................................13
Loading/Ejecting a disc..............................................................................13
Loading a Disc ......................................................................................................13
Ejecting a Disc ......................................................................................................13
Operation .....................................................................................................14
Basic Play .............................................................................................................14
Menu Function ......................................................................................................16
On-Screen Display Function.................................................................................16
Multi-audio Language Function............................................................................17
Title Menu Function ..............................................................................................18
Multi-Subtitle Language Function ........................................................................18
Multi-angle Function .............................................................................................18
MP3 Disc Play.......................................................................................................18
Setup ............................................................................................................19
Initial Setup ...........................................................................................................19
General Setup .......................................................................................................19
Speaker Setup ......................................................................................................21
Audio Setup ..........................................................................................................21
Preferences Setup ................................................................................................22
Defaults Table .......................................................................................................24
Trouble Shooting .........................................................................................25
Specifications..............................................................................................26
3
SAFETY INFORMATION
CAUTION:
MOBILE DVD PLAYER IS A CLASS I
LASER PRODUCT. HOWEVER THIS
MOBILE DVD PLAYER USES A
VISIBLE/INVISIBLE LASER BEAM
WHICH COULD CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE MOBILE
DVD PLAYER CORRECTLY AS
INSTRUCTED.
USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND - DO NOT
REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
Region Management Information
Region Management Information:
This Mobile DVD Player is designed and
manufactured to respond to the Region
Management Information that is recorded
on a DVD disc. If the Region number
described on the DVD disc does not
correspond to the Region number of this
Mobile DVD Player, this Mobile DVD
Player cannot play this disc.
WARNING:
• TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
• TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES.
• THIS DEVICE IS INTENDED FOR
CONTINUOUS OPERATION.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this
copyright protection technology must be
authorized by Macrovision Corporation,
and is intended for home and other
limited viewing uses only unless
otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
4
DISC NOTES
Disc formats supported by this player
Note these scratches are not an
indication of any problem with the player.
DVD
12 cm disc
(Single-sided disc only)
Label side up
Video CD
12 cm disc
CD
12 cm disc
Do not touch
the underside
of the disc
MP3
12 cm disc
Do not bend
Discs which cannot be played with this
player
• DVD-ROM
• DVD-R/DVD-RAM
• CDV
• CD-G
Wipe the disc from center
toward the outside edge
Handling and Cleaning
• Dirt, dust, scratches and warping disc
will cause misoperation.
• Do not place stickers or make
scratches on discs.
• Do not warp discs.
• A disc should always be kept in its
case when not in use to prevent from
damaging.
• Do not place discs in the following
places:
1. Direct sunlight
2. Dirty, dusty and damp areas
3. Near car heaters
4. On the seats or dashboard
Preparing New Discs with Rough
Spots
A new disc may have rough edges on its
inside and outside edges. If a disc with
rough edges is used, the proper setting
will not be performed and the player will
not play the disc. Therefore, remove the
rough edges in advance by using a ball
point pen or pencil as shown below. To
remove the rough edges, press the side
of the pen or pencil against the inside
and outside edges of the disc.
Rough spots on
outside edge
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.
Note:
A disc may become somewhat scratched
(although not enough to make it
unusable) depending on your handle it
and conditions in the usage environment.
Ball point pen
or pencil
Rough spots
on inside edge
5
THE PLAYER
5
3
8 1 4 10 20
11 9
2
7
6
5 22
14
14
15
15
16
17 18 19
6
THE PLAYER
12
13
7 INCH TFT COLOR MONITOR
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
Jacks for Earphone
DC 12V IN
AV IN
AV OUT
DIGITAL AUDIO
INFRARED TRANSMITTING
WINDOW (For the unit with infrared
transmitting function only)
21. Open button: Press the button to
eject the screen display from the base
at a little angle.
POWER ( )
EJECT ( )
MENU
MOD
Car Dome Lamp
Light Switch
VOLUME +
VOLUME IR
Indicator Light for DVD
Indicator Light for AV
Disc slot
7 inch TFT Color Monitor
Earphone volume control knob
7
INSTALLATION
Fig. 1
Mounting Bracket
Levers
Tapping Screws (ø4x10)
Slots
DVD Bracket
Mounting Bolts (M3.5x10)
Rubber Caps
Fig. 2
1.
2.
3.
4.
5.
6.
7.
Determine the mounting location and drill four mounting holes (See Fig.1).
Attach the mounting bracket to the holes with the tapping screws (ø4x10).
Let the two levers aim at the slots on the DVD bracket to fix the display unit.
Open the monitor to display the five screw holes.
Attach the unit to the bracket with the mounting bolts (M 3.5x10).
Insert five rubber caps to the screw holes.
When the installation has completed, you can also turn the display upward or
downward, left or right to adjust the viewing angle. (See the arrowhead symbol in
Fig.2).
8
REPLACING THE CAR DOME LAMP
Follow the directions shown below for a new lamp changing.
1. Press the open button to eject the screen display and turn it upward.
2. Position light switch to “OFF”.
3. Push back the lamp cover and open it. (Refer to the following figure)
4. Remove and discard the old lamp.
5. Install a new bulb.
6. Close the cover.
Lamp Cover
Bulb
Light Switch
Bulb Specification
Diameter:
ø8mm
Length:
28mm
Voltage Spec.: DC12V, 5W
CAR DOME LAMP WIRING
Line for Car Dome Lamp
Note:
Color
Connection
Red
Power Supply
White
Black
Interior Light System
Ground
9
CIGARETTE LIGHTER
10
RED
WHITE
AUDIO R OUT
AUDIO L OUT
VIDEO OUT
AUDIO R IN
AUDIO L IN
VIDEO IN
YELLOW
RED
WHITE
YELLOW
DIGITAL AUDIO
ELECTRIC CONNECTION
DC 12V IN
REMOTE CONTROL
LOCATION AND FUNCTION KEYS
8
9
4
5
1
2
3
6
7
10
11
12
14
13
15
16
18
17
19
20
21
24
23
22
25
28
29
32
26
27
30
31
11
REMOTE CONTROL
1.
2.
3.
4.
POWER
EJECT
MUTE
SUBTITLE
5.
6.
7.
8.
9.
10.
ANGLE
DISPLAY
MODE
SETUP
PAL/NTSC
AUDIO
11. TITLE
12. MENU
13.
/ , /
14. ENTER
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
/
/
/
0-9
10+
CLEAR
VOLUME+/-
25. ZOOM
26. RESUME
27.
28.
29.
30.
31.
32.
GOTO
PBC
RANDOM
PROGRAM
REPEAT
A-B
Press POWER to turn the unit ON or OFF.
Press to eject the disc.
Press to mute the sound.
Changing of the SUBTITLE language on multi-subtitle language
DVD disc.
Changing of the view angle on multi-angle DVD disc.
Display statistical disc information during playback.
Changing between DVD mode and AV mode.
Display the SETUP menu.
Switch between PAL mode and NTSC mode.
Changing of the AUDIO soundtrack on multi-audio soundtrack
DVD disc. Changing of the sound mode of the VCD/CD disc.
Display the TITLE menu that is stored in DVD disc.
Display the adjustment items, such as Bright, Contrast, Color,
Tint, Transmit, Screen and etc.
In case of MENU mode, / , / , buttons served as cursor
buttons to select item left/right, ahead/back.
Confirm the Track/Chapter selected with the numeric buttons or
selected with the cursor buttons on screen display.
Changing for slow forward/reverse playback motion.
Press to play the disc.
Press
to search forward rapidly &
to search reverse rapidly.
Press
to skip to the next track & press
to skip back one
track.
Press it to stop playback.
Press it to pause playback.
Numeric buttons
Digital selecting button, cooperatively used with numeric buttons.
When you input a number in error, press the button to clear it.
Press VOLUME+/- button to increase or decrease the volume
level.
Allows the picture to be increased in size.
When in stop mode, press the button, then play can be resumed
from the stop point.
Disc search button, cooperatively used with numeric buttons.
Changing between PBC ON and PBC OFF on the VCD disc.
Allows the track played in random order.
Allows the track played in the order you programmed.
Switch the Repeat mode of discs.
A-B repeat allows a passage to be repeated continuously.
12
REMOTE CONTROL
Preparing the Remote Control
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new batteries. Make sure
that the positive and negative
terminals of the batteries are oriented
as indicated.
3. Close the cover
Battery: Two AAA size battery.
Using the Remote Control
Face the remote control towards the
player front face IR mark (remote control
signal reciver).
Operation angle: About ± 30 degree in
each the direction of the front of the IR
mark.
LOADING/EJECTING A DISC
Loading a Disc
When you have installed the unit and all
connections have completed, you can
load a disc as follows:
1. Turn the ignition on the the accessory
position.
2. Press the POWER button (1).
3. Insert the disc with printed side facing
up into the disc slot (2) (see below).
4. The player will start playback
automatically.
1
2
3
Ejecting a Disc
Press (EJECT) button (3) to eject the
disc.
13
OPERATION
PAUSE
Pressing on the remote control during
playback will stop play temporary. To
return to normal playback, press on
the remoter control.
BASIC PLAY
STOPPING PLAY
- Brief press the (Stop) button to stop
the unit playback, when the (Play)
button is pressed, normal playback will
continue.
- Press (Stop) button twice to stop
the playback and go back to initial
Track/Chapter.
MUTE
Will mute the sound, but the disc
continues playing. When you unmute the
sound (press MUTE again), sound will
resume.
RAPID FORWARD/RAPID REVERSE
Press
&
during play. Each time
the button is pressed, the speed of rapid
forward/reverse changes according to
the disc as follow.
REPEAT
FOR DVD:
Press the REPEAT button to select
repeat mode as follow.
DVD:
Normal Playback
2X
4X
6X
CHAPTER REPEAT ON
8X
TITLE REPEAT ON
REPEAT OFF
FOR VCD/CD:
Press the REPEAT button to select
repeat mode as follow.
VCD/CD:
Normal Playback
1X
2X
3X
4X
REP-ONE
REP-ALL
REPEAT OFF
MP3:
Normal Playback
2X
4X
6X
8X
1. Continuously repeat at the current
chapter/track, when selected REPONE mode.
2. Select REP-ALL mode to continuously
repeat all chapter/track on the current
disc.
3. When the player finishes playback the
current discc last chapter/track, it will
stop and display the elapsed time.
When REPEAT OFF mode is selected,
REP-ONE & REP-ALL disappears
from screen display.
4. REPEAT feature does not support
VCD2.0 (with PBC ON).
SKIPPING TRACK
Press
/
buttons on the remote
control during playback.
to skip to next track, and
Press
to back one track.
Note: For some VCD 2.0 dics
(PBC-playback control),
/
buttons
may be unavailable.
SLOW MOTION PLAY
Press / during play.
Each time the button is pressed, the
speed of slow forward/reverse changes
according to the disc as follow.
A-B
A-B repeat allows a passage to be
repeated continuously. Press A-B button
at the start of the required passage, then
press A-B button again at the end of the
passage. To revert to normal playing,
press A-B button again. Each time the
button pressed, the screen will display
as follows:
DVD:
Normal Playback
2X
4X
8X
A TO B SET A
14
A TO B SET B
A TO B CANCELLED
OPERATION
DISC SEARCH (GOTO)
FOR DVD
Press GOTO button twice, the screen will
display the following message:
VOLUME LEVEL ADJUSTMENT
Press VOL +/VOL - on the front panel or
VOLUME +/- on the remote control to
increase or decrease the volume level.
LIGHT SWITCH
The two car dome lamps on the unit will
be on in some needed situations. There
are three settings for the car dome lamp
operation: OFF, AUTO, and ON, refer to
the light switch.
A. OFF: To turn off the lamp.
B. AUTO: To make the lamp turned on
only when car doors are opened.
C. ON: To turn on the lamp.
TITLE 01/01 TIME -- : -- : -00:00:25
You can select the item you want to
watch through TIME setting by using
numeric buttons and ENTER key.
FOR CD/VCD (WITH PBC OFF):
Press GOTO button once, the screen will
display the following message:
JACK FOR EARPHONE ( )
There are two jacks for earphone. You
can connect an earphone to anyone of
the jacks to receive sound signal.
GOTO -- : -00:00:25
EARPHONE VOLUME ADJUSTMENT
Slide the knob on the side of the DVD unit
to increase or decrease the volume level
of the earphone.
Use numeric buttons to input the time
directly.
ZOOM
REMOTE SENSOR (IR)
Point the remote handset to the remote
sensor IR on the front panel. Receive the
signal from remote handset.
Allows the picture to be incresed in size.
Press ZOOM to toggle among 1.5 scale,
2.0 scale and 3.0 scale.
TURNING THE UNIT ON/OFF
Press the (POWER) button on the front
panel or on the remote control to turn the
unit on or off.
RANDOM
Press RANDOM button, track selection
will be made in random order. The display
screen will show “SHUFFLE ON” on the
screen. Press RANDOM button again,
“SHUFFLE OFF” appears and release
the mode.
Monitor Release
Press the button on the unit to eject the
screen display from the base at a little
angle. Then you can easily turn the display
upward or downward for good viewing.
PROGRAM
In stop mode, press PROGRAM button,
the screen will display “PROGRAM
P00:00”. For example: press numeric
button 4 and button, “PROGRAM
P01:04” appears. It means track 4 will be
played first.
INFRARED TRANSMITTING WINDOW
There are six infrared transmitting lights
inside the window on the unit, the user
can put on the infrared wireless
headphones supplied with the unit and
hear the sound signal emitting from the
window.
MODE SELECTION
Press MOD button on the front panel of
the unit or MODE button on the remote
control to select among DVD and AV
mode. When select one mode, the
corresponding indicator on the front panel
will be illuminated.
SPEAKER ON/OFF SWITCH:
When you eject the monitor and turn it
upward, you will see a speaker on/off
switch on the base. Press it to switch the
speakers on/off.
15
OPERATION
MENU FUNCTION
ON-SCREEN DISPLAY FUNCTION
Press the MENU button on the unit or on
the remote control during DVD, AV mode
to display the adjustment items on the
screen.
Press the DISPLAY button during
playback to display the contents of the
current disc on the screen.
Example:
DVD:
MENU
BRIGHT
20
CONTRAST 25
COLOR
45
TINT
10
TRANSMIT ON
SCREEN
16:9
(1) Press DISPLAY for the first time:
TITLE 01/03 CHAPTER 002/025
00:02:25
Title Number, Total Title Number, Chapter
Number, Total Chapter Number of this
Title of the disc currently being played
will be shown on the screen, along with
the elapsed time.
Press MENU button repeatedly to
select among BRIGHT, CONTRAST,
COLOR and TINT (For the unit with NTSC
system) items and etc. Press VOL+/VOLbuttons on the unit or VOLUME +/buttons on the remote control to adjust
the corresponding item.
Note: When you set the TV TYPE item
to “PAL” in “PREFERENCES SETUP”,
there is no “TINT” item to display.
The TRANSMIT item is effective when
the unit has the infrared transmitting
function. In TRANSMIT item, there is ON
or OFF to be selected. When set it to ON,
the sound signal can be emitted from the
infrared transmitting window on the unit
and you can use the infrared wireless
headphone to hear the sound signal.
In SCREEN item, you can select
appropriate TV aspect ratio (4:3 or 16:9)
using the VOL +/VOL- buttons on the unit
or VOLUME +/- buttons on the remote
control.
(2) Press DISPLAY for the second time:
TITLE REMAIN
01:46:58
(3) Press DISPLAY for the third time:
CHAPTER ELAPSED
00:00:24
(4) Press DISPLAY for the fourth time:
CHAPTER REMAIN
00:01:39
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
VCD:
(1) Press DISPLAY for the first time:
SINGLE ELAPSED
00:00:25
16
OPERATION
(2) Press DISPLAY for the second time:
(4) Press DISPLAY for the fourth time:
TOTAL REMAIN
00:40:35
SINGLE REMAIN
00:03:15
TRACK : 01/14
(3) Press DISPLAY for the third time:
(5) Press DISPLAY for the fifth time:
TOTAL ELAPSED
The message on the screen will be cleared.
00:00:25
MP3 (When set to NO MENU in SMART
NAV item):
(1) Press DISPLAY for the first time:
(4) Press DISPLAY for the fourth time:
CHAPTER ELASPED 00:00:25
TOTAL REMAIN
00:40:35
TRACK : 01/123
(2) Press DISPLAY for the second time:.
(5) Press DISPLAY for the fifth time:
CHAPTER REMAIN
The message on the screen will be cleared.
00:04:25
CD:
(1)Press DISPLAY for the first time:
TRACK : 01/123
SINGLE ELASPED
00:00:25
(3) Press DISPLAY for the third time:
The message on the screen will be cleared.
TRACK : 01/14
MULTI-AUDIO LANGUAGE FUNCTION
For DVD:
Press AUDIO on the remote control
during playback.
Each time the button is pressed, the
audio soundtrack language changes in
sequential order.
Notes:
- The language number is different
according to the disc.
- Some disc only contain one language
soundtrack.
- When no different language
(2)Press DISPLAY for the second time:
SINGLE REMAIN
00:03:15
TRACK : 01/14
(3)Press DISPLAY for the third time:
TOTAL ELASPED
00:00:25
soundtrack are recorded,
will be
displayed at screen left top corner.
TRACK : 01/14
17
For VCD/CD:
Press AUDIO on the remote control
during playback.
It is possible to switch the sound
between monaural and stereo sound.
OPERATION
MONO LEFT
MONO RIGHT
MP3 DISC PLAY
STEREO
MP3 disc is playing as the format of
FOLDER.
For example:
TITLE MENU FUNCTION
(FOR DVD ONLY)
If the DVD has multiple titles recorded on
the disc. It can select preferred title from
the title menu to start playback.
- Press TITLE during playback.
The title menu is display.
- Press the cursor button shown in
screen display, select preferred title
by the cursor button and confirmed
by ENTER key.
SMART NAVI
ROOT
MULTI-SUBTITLE LANGUAGE
FUNCTION
(FOR DVD ONLY)
CD01
MP3 001 PLUMT
CD02
MP3 002 RZID
CD03
MP3 003 ASCIS
CD04
MP3 004 DCYI
CD05
MP3 005 BFZ
PLAY MODE
Press SUBTITLE during playback.
Each time the button is pressed, the
subtitle language changes in sequential
order.
Notes:
- The language number is different
according to the disc.
- Some discs only contain one subtitle
language.
- When no different subtitle language
DISC
In stop mode, use / , / on the
remote control to select the item or folder
(such as CD01, CD02...), and press
ENTER button on the remote control to
confirm, then select the desired track
(such as 001 PLUMT, 002 RZID...) on the
current folder to play.
Pressing REPEAT button repeatedly can
select three kinds of repeat play mode.
REP-ONE:
Play the same song over and again.
FOLDER REP:
Play all songs in the current directory
in sequence, over and again.
FOLDER:
Play all songs in the current directory
once.
When select PLAY MODE , press / to
change between the following mode:
are recorded,
will be displayed at
screen left top corner.
MULTI-ANGLE FUNCTION
(FOR DVD ONLY)
Press ANGLE during playback.
Each time the button is pressed, the
angle changes in sequential order.
Notes:
- The angle number is different
according to the disc.
- The function only works for discs
having scenes recorded at different
angles.
- When no different angle are recorded,
SINGLE
REP-ONE
DISC SCAN
SHUFFLE ON
DISC
FOLDER
FOLDER REP
DISC REP
PROGRAM PXXX
or
to skip an
In the playback, use
item ahead or back.
: Rapid reverse,
: Rapid advance
Note: The FOLDER cannot be selected
during playing. It can be selected after
(Stop) button pressed.
will be displayed at screen left top
corner.
18
SETUP
GENERAL SETUP
INITIAL SETUP
--- GENERAL PAGE ---
SETUP MENU --- MAIN PAGE
GENERAL SETUP
TV DISPLAY
NORMAL/PS
SPEAKER SETUP
PIC MODE
NORMAL/LB
AUDIO SETUP
ANGLE MARK
WIDE
PREFERENCES
OSD LANG
CAPTIONS
SCR SAVER
EXIT SETUP
1. Press SETUP in the stop mode.
(Press the stop button twice to ensure
the player is in STOP mode.)
MAIN PAGE
TV Screen
2. The initial SETUP menu is displayed.
4:3
Video Material
Normal
3. Select the preferred item by using the
/ buttons.
Pan Scan
Wide (16:9)
Letter-box
4:3
16:9
4. Press ENTER buttons.
a. GENERAL SETUP
This setup page includes all the
item of TV display & audio output
feature. The detail please refer to
GENERAL SETUP MENU.
TV display setup
This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
connected TV set.
Normal/PS (For 4:3 TV)
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the left
and right edges are cut off.)
b. SPEAKER SETUP
This is to activate the audio output
from DOLBY AC3 5.1 DOWNMIX
to 2 channel mode. Please refer to
SPEAKER SETUP MENU.
Normal/LB (For 4:3 TV)
Played back in letterbox style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
c. AUDIO SETUP
This setup page includes all the
items for AUDIO. Please refer to
AUDIO SETUP MENU.
Wide (For 16:9 TV)
Select when a wide-screen TV set is
connected.
d. PREFERENCE SETUP
This setup page includes all the
configuration of support feature.
The detail please refer to
PREFERENCES SETUP MENU.
19
SETUP
--- GENERAL PAGE ---
--- GENERAL PAGE --TV DISPLAY
TV DISPLAY
PIC MODE
AUTO
PIC MODE
ANGLE MARK
HI-RES
ANGLE MARK
OSD LANG
N-FLICKER
OSD LANG
ENGLISH
CAPTIONS
CAPTIONS
FRENCH
SCR SAVER
SCR SAVER
GERMAN
ITILAIN
SPANISH
MAIN PAGE
MAIN PAGE
PIC mode setup
Select AUTO, the player PIC mode will
depend on DVD disc.
Select HI-RES format for best image
resolution.
Select N-FLICKER format on format on
image or picture under noise affect.
OSD LANG type setup
Select the preferred OSD (On Sreen
Display) language by using the /
buttons.
--- GENERAL PAGE --TV DISPLAY
--- GENERAL PAGE ---
PIC MODE
TV DISPLAY
ANGLE MARK
PIC MODE
OSD LANG
ANGLE MARK
ON
CAPTIONS
ON
OSD LANG
OFF
SCR SAVER
OFF
CAPTIONS
SCR SAVER
MAIN PAGE
CAPTIONS setup
Activate the CAPTIONS feature by
selecting ON. And deactive this feature
by selecting OFF.
MAIN PAGE
ANGLE MARK display setup
If it is set to ON, when the multi-angle
DVD disc is playing, (the angle mark)
will appear on the screen; if it is set to
OFF, the mark will not appear.
20
SETUP
AUDIO SETUP
--- GENERAL PAGE ---
--- AUDIO SETUP ---
TV DISPLAY
PIC MODE
SPDIF
OFF
ANGLE MARK
OP MODE
ON
OSD LANG
DYNAMIC
CAPTIONS
SCR SAVER
LPCM OUTPUT
ON
OFF
MAIN PAGE
SCR SAVER setup
Select the SCR SAVER ON/OFF.
MAIN PAGE
SPDIF
This is to activate the digital audio
output on or off.
SPEAKER SETUP
--- SPEAKER SETUP PAGE --DOWNMIX
LT/RT
--- AUDIO SETUP ---
STEREO
SPDIF
MAIN PAGE
OP MODE
LINE OUT
DYNAMIC
RF REMOD
LPCM OUTPUT
MAIN PAGE
This is to activate the audio output from
DOLBY AC3 5.1 DOWNMIX to 2 channel
mode. Select the preferred SPEAKER
connection by using the cursor buttons.
- Select the LT/RT to activate the Dolby
surround compatible output.
- Select the STEREO to activate simple
stereo mode.
OP MODE
There are two operating modes for the
Dolby Digital decoder: LINE OUT and
RF REMOD.
21
SETUP
--- AUDIO SETUP ---
PREFERENCES SETUP
--- PREFERENCES PAGE ---
SPDIF
OP MODE
FULL
DYNAMIC
6/8
LPCM OUTPUT
4/8
TV TYPE
AUTO
AUDIO
NTSC
SUBTITLE
PAL
DISC MENU
2/8
PARENTAL
OFF
PASSWORD
DEFAULTS
SMART NAV
LOGO
MAIN PAGE
MAIN PAGE
TV type setup
This player can play discs recorded in
either PAL or NTSC format.
Select NTSC format, when you
connected to NTSC TV.
Select PAL format, when you connected
to PAL TV.
Select AUTO format, the player TV output
format will be according to the DVD disc
format.
Dynamic Range Control
Select DYNAMIC and adjust the dynamic
range of a Dobly Digital encoded
program. There are 8 steps between full
compression and off compression.
--- AUDIO SETUP --SPDIF
--- PREFERENCES PAGE ---
OP MODE
TV TYPE
DYNAMIC
AUDIO
ENGLISH
LPCM 48K
SUBTITLE
FRENCH
LPCM 96K
DISC MENU
SPANISH
PARENTAL
CHINESE
PASSWORD
JAPANESE
DEFAULTS
GERMAN
SMART NAV
ITALIAN
LPCM OUTPUT
MAIN PAGE
LOGO
MAIN PAGE
LPCM OUTPUT
Select the LPCM OUTPUT between
LPCM 48K and LPCM 96K.
AUDIO language setup
Select the preferred AUDIO soundtrack
by using the cursor buttons.
22
SETUP
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
TV TYPE
1G
AUDIO
AUDIO
2
SUBTITLE
ENGLISH
SUBTITLE
3 PG
DISC MENU
FRENCH
DISC MENU
4 PG 13
PARENTAL
SPANISH
PARENTAL
5
PASSWORD
CHINESE
PASSWORD
6 PG-R
DEFAULTS
JAPANESE
DEFAULTS
7 NC-17
SMART NAV
GERMAN
SMART NAV
8 ADULT
LOGO
ITALIAN
LOGO
NO PARENTAL
MAIN PAGE
OFF
MAIN PAGE
SUBTITLE language setup
Select the preferred SUBTITLE language
by using the cursor buttons.
PARENTAL
Select suitable parental guidance by the
cursor buttons and conformed by
pressing ENTER button.
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
TV TYPE
AUDIO
AUDIO
SUBTITLE
SUBTITLE
DISC MENU
ENGLISH
DISC MENU
PARENTAL
FRENCH
PARENTAL
PASSWORD
SPANISH
PASSWORD
DEFAULTS
CHINESE
DEFAULTS
SMART NAV
JAPANESE
SMART NAV
LOGO
GERMAN
LOGO
MAIN PAGE
ITALIAN
MAIN PAGE
CHANGE
PASSWORD
Select CHANGE and press ENTER
button. Type the old password (The initial
factory code is 3308) and key in 4
characters password now you want to
use, and retype again to confirm key in
correctly.
DISC MENU language setup
Select the preferred DISC MENU
language by using the cursor buttons.
23
SETUP
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
TV TYPE
AUDIO
AUDIO
SUBTITLE
SUBTITLE
DISC MENU
DISC MENU
PARENTAL
PARENTAL
PASSWORD
PASSWORD
DEFAULTS
ORIG LOGO
SMART NAV
SMART NAV
CUST LOGO
LOGO
LOGO
MAIN PAGE
MAIN PAGE
DEFAULTS
RESET
LOGO
Select ORIG LOGO (original picture when
the unit turns on) or CUSTLOGO
(customer-set picture when the unit turns
on).
DEFAULTS
Select reset to become factory initial
setting.
DEFAULTS TABLE
General Setup TV Display
--- PREFERENCES PAGE ---
Normal/PS
PIC Mode
AUTO
TV TYPE
Angle Mark
ON
AUDIO
OSD Language English
SUBTITLE
Captions
SCR Saver
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
NO MENU
SMART NAV
WITH MENU
OFF
OFF
Speaker Setup Downmix
Stereo
Audio Setup SPDIF
OFF
OP Mode
Line Out
Dynamic
FULL
LPCM Output LPCM 96K
LOGO
Preferences TV Type
MAIN PAGE
SMART NAV
In this item, you can select NO MENU
mode or WITH MENU mode.
24
AUTO
Audio
English
Subtitle
English
DISC Menu
English
Parental
6 PG-R
Password
3308
Smart NAV
With Menu
Logo
Orig Logo
TROUBLE SHOOTING
DISTORTED SOUND FROM HIFI
AMPLIFIER
• Check to make sure that no audio
connections are made to the amplifier
phono input.
If it appears that your DVD unit is faulty,
first consult this checklist. It may be that
something simple has been overlooked.
Under no circumstances should you
try to repair the player yourself, as this
will invalidate the warranty. Only
qualified service personnel can remove
the cover or service this player.
NO RETURN TO START-UP SCREEN
WHEN DISC IS REMOVED
• Press POWER to turn off the unit, then
press it again to turn on the unit.
NO POWER
• Check if the on/off button on the front
of the player is set to on.
• Check if AC or DC power plug of the
mains unit is properly connected.
• Check if there is power at the AC or
DC outlet.
THE PLAYER DOES NOT RESPOND TO
THE REMOTE CONTROL
• Aim the remote control directly at the
sensor on the front of the player.
• Avoid all obstacles which may interfere
with the signal path.
• Inspect or replace the remote control
batteries.
NO PICTURE
• Check if the mode it set to proper state,
such as DVD mode and AV mode.
• Check the video connection.
DISTORTED OR B/W PICTURE
• The disc format is not according to the
TV-set used (PAL/NTSC).
DISTORTED PICTURE
• Check the disc for fingerprints and
clean with soft cloth, wiping from centre
to edge.
• Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
NO AUDIO AT DIGITAL OUTPUT
• Check the digital connections
• Check the Digital Audio menu to make
sure that the digital output is correctly
set.
• Check if the audio format of the
selected audio language matches your
receiver’s capabilities.
COMPLETELY DISTORTED PICTURE
• The disc format is not according to the
TV-set used (PAL/NTSC).
BUTTONS DO NOT WORK
• Turn the player off and on with the
power on/off button on the front of the
player.
NO COLOR IN PICTURE
• The disc format is not according to the
TV-set used (PAL/NTSC).
DISC DOES NOT PLAY
• Ensure the disc label is upwards.
• Clean the disc.
• Check if the disc is defective by trying
another disc.
NO SOUND
• Check audio connections.
• If using a HIFI amplifier, try another
sound source.
25
SPECIFICATIONS
Supply Voltage
Current Consumption
Signal System
Discs Played
Audio Output Level
Audio Signal Output
Characteristics
:
:
:
:
12V DC (11V-15V), test voltage 14.4V, negative ground
Less than 2A
Compositive video 1.0Vp-p 75Ω
(1) DVD-VIDEO Disc
5” (12 cm) single-sided, single-layer
5” (12 cm) single-sided, double-layer
(2) Compact Disc (CD-DA/CD-R/CD-RW/MP3)
(3) 5” (12cm) VIDEO CD
: 10kΩ (2 ch 2.0 Vrms)
: (1) Frequency Response
: (2) S/N Ratio
: (3) Wow and Flutter
20 Hz - 20 KHz
80 dB (JIS)
Below measurable limits
Note:
Specifications and design are subject to modification, without notice, due to
improvements in technology.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
26
www.pyleaudio.com
88-V1343-33