RCA AH30BR User's Manual

Add to my manuals
1 Pages

advertisement

RCA AH30BR User's Manual | Manualzz
Universal AC/DC Adapter
AH30BR/AH50BR
User’s Guide
The RCA brand Universal AC/DC Adapter allows you to power portable
devices requiring 300mA or less (AH30BR) or 500mA or less (AH50BR)
using a conventional AC electrical outlet.
Instructions:
1. Set the voltage selector switch to the proper setting for your device.
Refer to the device’s user manual for the correct voltage requirement,
or determine the voltage by multiplying the number of AA, AAA, C, or
D batteries required by 1.5—for example, 4 batteries x 1.5 = 6 volts.
Note: Voltage setting may also be found next to the DC jack or on device
information plate.
2. Select the adapter plug tip that best fits device.
3. Before inserting the plug tip into the
AC adapter receptacle, you must first
determine the correct polarity of your
device. Polarity is represented by the
following symbols.
positive
negative
Note: Polarity information may be found
next to the DC jack, user manual, or device
information plate. The adapter plug tips have a positive (+) symbol on one side
and a negative (-) symbol on the other side. The AC adapter receptacle says
“TIP” on one side.
negative
positive
If your device has negative polarity, align the word “Tip” on the AC
adapter receptacle with the (-) symbol on the adapter plug tip. See
diagram below.
negative
adapter receptacle
5. Connect adapter plug tip into DC jack of your device.
6. Plug the AC adapter into a 110/120-volt standard electrical outlet and
operate device as usual. Important: This power unit is intended to be
correctly oriented in a vertical or floor mount position.
7. If your device does not work, IMMEDIATELY unplug the AC adapter and
recheck the instructions carefully, particularly the voltage and polarity
settings.
CAUTION:
1. Never attempt to power a device for which the voltage or polarity is
unknown. Improper voltage or polarity settings may result in severe
damage to the device or AC Adapter.
2. This AC adapter should never be used with any device that requires more
than 300mA (AH30BR) or 500mA (AH50BR) of current.
3. Disconnect the AC adapter from electrical outlet when not in use.
L’adaptateur CA/
des dispositifs po
ou moins (AH50B
Instructions
1. Réglez le com
appareil.
Consultez le g
réglage du vo
en multipliant
par exemple,
Remarque : Le
ou sur la fiche
2. Sélectionnez
appareil.
3. Avant d’insér
prise de l’ada
devez d’abord
appropriée po
polarité est re
symboles sui
Remarque: Les
prise CC, dans
Les fiches de l’
négatif (-) de l’a
adapter receptacle
4. If your device has positive polarity, align the word “Tip” on the AC
adapter receptacle with the (+) symbol on the adapter plug tip. See
diagram below.
positive adapter receptacle
4. Si votre appa
de la prise de
l’adaptateur. C

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement