RCA MAF40BKR Installation and Operation Instructions
Add to my manuals
4 Pages
RCA MAF40BKR is a universal LCD TV wall mount designed for flat-panel TVs ranging from 13 to 27 inches in size, with a maximum weight capacity of 40 lbs. It features a two-piece, low-profile design for a sleek look, and offers smooth panning, swiveling, and tilting adjustments for optimal viewing angles. The mount also includes an integrated bubble level and cord management system for a clean and organized installation. With its sturdy construction and easy-to-follow instructions, RCA MAF40BKR provides a secure and versatile mounting solution for your flat-panel TV.
advertisement
fl at panel solutions
LCD TV Wall Mount
Installation Manual
Fits TVs 13"- 27"
Maximum Load Capacity – 40 lbs. (18 kg)
MAF40BKR
Thank you for choosing a Universal
Flat Panel TV Wall Mount from RCA.
This mount can be used for all major brands of 13" - 27" fl at panel TVs,
40 lbs (18 kg) or under. This wall mount features a 0-15-degree tilt,
180-degree pan and swivel, and double swing arm extension for easy viewing. Before attempting to mount your television set, please remove all parts from this package and read the installation instructions carefully.
WARNING: Use of this mount with a TV weighing over 40 lbs. or with a screen larger than 27" could cause the mount to fail causing property damage and/or personal injury.
CAUTION:
This wall mount is intended for use only with the maximum weight of
18 kg/40 lbs. Use with heavier than the maximum weights indicated may result in instability causing possible injury. Follow the installation and operation instructions carefully.
Safety precautions
Follow these precautions to ensure safe installation and mounting of your fl at panel TV.
1.
Be sure you have purchased the correct wall mount for your TV. Recheck the size and weight constraints.
2.
Gather all necessary tools before you begin installation. You will need a #3 bit
Phillips screwdriver, electric drill, drill bit (included), level (integrated level on product), stud fi nder, and hammer (for brick and concrete installations).
3.
It is essential for the wall mount plate to be attached to wall studs.
(Use a stud fi nder.)
4.
Use the included hardware for mounting purposes. This hardware has been provided to ensure a safe and secure mount.
5.
Hire a licensed electrician to relocate an electrical outlet, if needed.
6.
Be sure to purchase wires long enough to connect the TV to the audio and video components in your installation.
7.
We recommend you hire a professional installer, if you have any concerns about installing the TV wall mount yourself.
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the model number.
Model No. _____________________________________________________________
Purchase Date: _________________________________________________________
Dealer/Address/Phone __________________________________________________
Specifi cations
Model:
Description:
TV Size Range:
Max. Load:
Min. Profi le:
Max. Extension:
MAF40BKR
Two-piece, low-profi le design
RCA Universal LCD TV Wall
Mount with Swing Arm Extension
13" – 27"
40 lbs. (18kg)
2.7" (6.9 cm)
9.6" (24.4 cm)
Tilt:
Swivel:
+/- 0-15°
180°
VESA Compliant: 100/100
Integrated Bubble Level / Cord Management System
Attaching wall mount plate
Drywall Installation
1.
Use a stud fi nder to locate a wood stud where you want to install the mount.
NOTE: It is required that the wall mount plate be attached to wall studs.
2.
Locate center of stud.
3.
Place the wall mount plate against the wall, with the cord management channel towards the bottom. Level it using the bubble guide. Mark the locations on the wall where the mount is to be installed.
4.
Drill holes at each marked location using the enclosed wood drill bit.
5.
Secure the wall mount plate to the wall, using one drywall screw, but do not completely tighten it yet.
6
. Using the integrated bubble level, carefully adjust the wall mount plate until it is level.
7.
Insert the remaining screws and tighten all three screws completely.
Concrete/Brick Installation
1.
Place the wall mount plate against the wall with the cord management channel towards the bottom.
2.
Using the integrated bubble level, mark off the position of the holes that will be used for securing the mount.
3.
Place the wall mount plate aside.
4.
Using an electric drill and a 5/16" (8mm) masonry bit, drill holes in the marked locations.
5.
Remove any excess dust from the holes.
6.
Insert a concrete anchor into each hole. If necessary, use a hammer to lightly tap each anchor into place so they are fl ush with the wall.
7.
Once both anchors are in place, place the wall mount plate back into position.
Using the integrated bubble level, carefully adjust the wall mount plate until it is level.
8.
Attach the wall mount plate, using the drywall screws provided.
9.
Make sure all screws are tightened and secure.
Attaching the TV mount plate
1.
Unplug your fl at panel TV before starting this step of the installation.
IMPORTANT: NEVER lay the TV face down as this may cause damage to the viewing surface.
2.
Before attaching the TV mount plate to the TV, determine which hardware to use. Examine the back of your TV. If the back is fl at, use the M4x12mm bolts.
If your TV has a recessed back, use the longer M4x30mm bolts and 1/2" spacers.
3.
After you have determined which bolts to use, attach the TV mount plate to the back of your TV.
NOTE: Be careful not to over-tighten the bolts.
Attaching the TV mount plate to the wall mount plate
1.
To complete the installation, slide the TV mount plate with your TV attached into the wall mount plate.
2.
The retainer clip on the top of the wall mount plate should click, indicating that the mount is secure.
3.
To remove the TV, push in on the clip and slide the TV mount plate up.
4.
For additional security and stability, insert the security bolt into the hole located at the base of the unit.
5.
Tighten, using the Allen Wrench provided.
Preparing to install
Before beginning the installation process, verify that you have all the necessary tools on hand. The following tools are required for proper installation:
Tools
#3 bit Phillips screwdriver
Stud fi nder
Electric drill
Drill bit (included)
5/16" (8mm) masonry drill bit for concrete/brick installation
Level (integrated level on product)
Allen Wrench (included)
Hammer (for concrete installations)
Package Contents
Make sure all the hardware has been included with your mount.
(1) Drill Bit
(3) 1-7/8" Drywall Screws
(3) Concrete Anchors
(2) Allen Wrenches
(4) M4x12mm Bolts
(4) M4x30mm Bolts
(4) 1/2" Spacers
(1) Security Bolt
(1) Phillips-Head Driver
Product diagram
TV Mount Plate
Adjustment Knob
Double Swing Arm Extension
Retainer Clip
Integrated Bubble Level
Wall Mount Plate
Security Bolt Position
Cord Management Channel
Operation and adjustment
Your RCA Flat Panel TV Wall Mount features an adjustable 15-degree tilt and
180-degree pan and swivel action for easy viewing.
To adjust the tilt:
1.
Locate the adjustment knob directly behind the TV mounting point.
2.
Loosen the knob by turning it counter-clockwise.
3.
Adjust the tilt to the desired level and re-tighten the knob to lock the adjustment in place.
To adjust the swivel:
1.
Simply move the extension arm into the desired position.
2.
If the joint is too tight or too loose, adjust the tightness of the joint.
3.
Locate the knob closest to the wall.
4.
Turn the knob counter-clockwise to loosen and clockwise to tighten.
Limited Lifetime Warranty
Audiovox Electronics Corporation (the “Company”) warrants to you the original retail purchaser of this product that should it, under normal use and conditions, be proven defective in material or workmanship during its lifetime while you own it, such defect(s) will be repaired or replaced (at the Company’s option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specifi cation of defect(s), transportation prepaid, to the Company at the address shown below.
Do not return this product to the Retailer.
This Warranty does not cover product purchased, serviced or used outside the
United States or Canada.
This Warranty is not transferable and does not extend to costs incurred for installation, removal or reinstallation of the product. This Warranty does not apply if in the Company’s opinion, the product has been damaged through alteration, improper installation, mishandling, misuse, neglect, or accident.
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO
EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE
PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO DURATION
OF THIS WARRANTY. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specifi c legal rights and you may also have other rights which vary from state/ province to state/province.
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd.,
Hauppauge, New York 11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door
16, Mississauga, Ontario L5T 3A5
Trademark(s) Registered
All other brands and product names are trademarks or registered trademarks of their respective owners.
© 2010 Audiovox Accessories Corporation www.rcaaccessories.com MAF40BKR_US_IB_03
solutions écran plat
Support mural pour TV LCD
Manuel d'installation
Pour téléviseurs de 13 à 27 po
Capacité de charge maximale – 40 lb (18 kg)
MAF40BKR
Merci d'avoir choisi une fi xation murale pour téléviseur à écran plat universelle RCA. Cette fi xation est compatible avec toutes les grandes marques de téléviseurs à écran plat de 13 à 27 po, de 40 lb (18 kg) et moins. Cette fi xation murale comprend un dispositif d'inclinaison de 0-15 degrés et de panoramique et de pivotement de 180 degrés qui facilite le visionnement. Avant de tenter de fi xer le téléviseur en place, retirez toutes les pièces de l'emballage et lisez attentivement les instructions d'installation.
AVERTISSEMENT : Toute utilisation de ce support avec un téléviseur d’un poids supérieur à 40 lb (18 kg), ou dont la taille de l’écran est supérieure à
27 po, peut provoquer une défaillance du support et par conséquent des dommages matériels et (ou) des blessures corporelles.
MISE EN GARDE :
Ce support mural est conçu pour supporter un poids maximal de
18 kg/40 lb. Son utilisation avec un poids supérieur au maximum indiqué pourrait causer de l’instabilité et des blessures. Respectez soigneusement les instructions d’installation et d’utilisation.
Mesures de précaution
Suivez ces précautions pour installer et la fi xer au téléviseur à écran plat en toute sécurité.
1.
Assurez-vous que la fi xation murale achetée convient à votre téléviseur. Vérifi ez de nouveau les limites de dimensions et de poids.
2.
Rassemblez les outils nécessaires avant d'entreprendre l'installation. Vous aurez besoin d'un tournevis Phillips à lame no 3, d'une perceuse électrique, d'une mèche (incluse), d'un niveau (intégré au produit), d'un localisateur de montants et d'un marteau (pour les installations sur brique et béton).
3.
Vous devez absolument fi xer la fi xation murale aux montants du mur. (Utilisez un localisateur de montants.)
4.
Utilisez le matériel fourni pour la fi xation. Ce matériel garantit une installation sûre et sécuritaire.
5.
Demandez à un électricien compétent de déplacer une prise de courant au besoin.
6.
N'oubliez pas d'acheter des fi ls suffi samment longs pour raccorder le téléviseur aux appareils audio et vidéo dans votre installation.
7.
Nous recommandons de faire appel aux services d'un installateur professionnel si vous craignez de ne pouvoir installer la fi xation murale du téléviseur seul.
Conservez votre coupon de caisse pour obtenir les pièces et le service sous garantie et comme preuve d'achat. Fixez-le ici et inscrivez le numéro de modèle.
No de modèle ___________________________________________________________
Date d'achat : ___________________________________________________________
Détaillant/adresse/téléphone ______________________________________________
Fiche technique
Modèle : MAF40BKR
Design en deux pièces surbaissé
Description : Fixation murale pour téléviseur à écran plat universelle
RCA à bras d'extension pivotant
Dimensions de téléviseur : 13 à 27 po
Charge maximale : 40 lb (18 kg)
Profi l min. :
Extension max. :
Inclinaison :
Pivotement :
2,7 po (6,9 cm)
9,6 po (24,4 cm)
+/- 0-15 °
180 °
Conforme VESA : 100/100
Niveau à bulle intégré / Système guide-cordon
Préparation pour l'installation
Avant d'entreprendre l'installation, assurez-vous d'avoir tous les outils nécessaires en main. Les outils suivants sont nécessaires pour réaliser une installation appropriée :
Outils
Tournevis Phillips à lame n o 3
Localisateur de montants
Perceuse électrique
Mèche (incluse)
Mèche à maçonnerie de 5/16 po (8 mm) pour béton/brique
Niveau (intégré au produit)
Clé Allen (incluse)
Marteau (pour installations sur béton)
Contenu de l'emballage
Assurez-vous que tout le matériel est inclus avec la fi xation.
(1) Mèche
(3) Vis à placoplâtre de 1 7/8 po
(3) Ancrages de béton
(2) Clé Allen
(4) Boulons M4 x 12 mm
(4) Boulons M4 x 30 mm
(4) Entretoises de 1/2 po
(1) Boulon de sécurité
(1) Outil pour vis Phillips
Schéma du produit
Plaque de fi xation du téléviseur
Bouton d'ajustement
Bras d'extension pivotant double
Bague de maintien
Niveau à bulle intégré
Plaque de fi xation murale
Position de boulon de sécurité
Guide-cordon
fl at panel solutions
LCD TV Wall Mount
Installation Manual
Fits TVs 13"- 27"
Maximum Load Capacity – 40 lbs. (18 kg)
MAF40BKR
Thank you for choosing a Universal
Flat Panel TV Wall Mount from RCA.
This mount can be used for all major brands of 13" - 27" fl at panel TVs,
40 lbs (18 kg) or under. This wall mount features a 0-15-degree tilt,
180-degree pan and swivel, and double swing arm extension for easy viewing. Before attempting to mount your television set, please remove all parts from this package and read the installation instructions carefully.
WARNING: Use of this mount with a TV weighing over 40 lbs. or with a screen larger than 27" could cause the mount to fail causing property damage and/or personal injury.
CAUTION:
This wall mount is intended for use only with the maximum weight of
18 kg/40 lbs. Use with heavier than the maximum weights indicated may result in instability causing possible injury. Follow the installation and operation instructions carefully.
Safety precautions
Follow these precautions to ensure safe installation and mounting of your fl at panel TV.
1.
Be sure you have purchased the correct wall mount for your TV. Recheck the size and weight constraints.
2.
Gather all necessary tools before you begin installation. You will need a #3 bit
Phillips screwdriver, electric drill, drill bit (included), level (integrated level on product), stud fi nder, and hammer (for brick and concrete installations).
3.
It is essential for the wall mount plate to be attached to wall studs.
(Use a stud fi nder.)
4.
Use the included hardware for mounting purposes. This hardware has been provided to ensure a safe and secure mount.
5.
Hire a licensed electrician to relocate an electrical outlet, if needed.
6.
Be sure to purchase wires long enough to connect the TV to the audio and video components in your installation.
7.
We recommend you hire a professional installer, if you have any concerns about installing the TV wall mount yourself.
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the model number.
Model No. _____________________________________________________________
Purchase Date: _________________________________________________________
Dealer/Address/Phone __________________________________________________
Specifi cations
Model:
Description:
TV Size Range:
Max. Load:
Min. Profi le:
Max. Extension:
Tilt:
Swivel:
MAF40BKR
Two-piece, low-profi le design
RCA Universal LCD TV Wall
Mount with Swing Arm Extension
13" – 27"
40 lbs. (18kg)
2.7" (6.9 cm)
9.6" (24.4 cm)
+/- 0-15°
180°
VESA Compliant: 100/100
Integrated Bubble Level / Cord Management System
Attaching wall mount plate
Drywall Installation
1.
Use a stud fi nder to locate a wood stud where you want to install the mount.
NOTE: It is required that the wall mount plate be attached to wall studs.
2.
Locate center of stud.
3.
Place the wall mount plate against the wall, with the cord management channel towards the bottom. Level it using the bubble guide. Mark the locations on the wall where the mount is to be installed.
4.
Drill holes at each marked location using the enclosed wood drill bit.
5.
Secure the wall mount plate to the wall, using one drywall screw, but do not completely tighten it yet.
6
. Using the integrated bubble level, carefully adjust the wall mount plate until it is level.
7.
Insert the remaining screws and tighten all three screws completely.
Concrete/Brick Installation
1.
Place the wall mount plate against the wall with the cord management channel towards the bottom.
2.
Using the integrated bubble level, mark off the position of the holes that will be used for securing the mount.
3.
Place the wall mount plate aside.
4.
Using an electric drill and a 5/16" (8mm) masonry bit, drill holes in the marked locations.
5.
Remove any excess dust from the holes.
6.
Insert a concrete anchor into each hole. If necessary, use a hammer to lightly tap each anchor into place so they are fl ush with the wall.
7.
Once both anchors are in place, place the wall mount plate back into position.
Using the integrated bubble level, carefully adjust the wall mount plate until it is level.
8.
Attach the wall mount plate, using the drywall screws provided.
9.
Make sure all screws are tightened and secure.
Attaching the TV mount plate
1.
Unplug your fl at panel TV before starting this step of the installation.
IMPORTANT: NEVER lay the TV face down as this may cause damage to the viewing surface.
2.
Before attaching the TV mount plate to the TV, determine which hardware to use. Examine the back of your TV. If the back is fl at, use the M4x12mm bolts.
If your TV has a recessed back, use the longer M4x30mm bolts and 1/2" spacers.
3.
After you have determined which bolts to use, attach the TV mount plate to the back of your TV.
NOTE: Be careful not to over-tighten the bolts.
Attaching the TV mount plate to the wall mount plate
1.
To complete the installation, slide the TV mount plate with your TV attached into the wall mount plate.
2.
The retainer clip on the top of the wall mount plate should click, indicating that the mount is secure.
3.
To remove the TV, push in on the clip and slide the TV mount plate up.
4.
For additional security and stability, insert the security bolt into the hole located at the base of the unit.
5.
Tighten, using the Allen Wrench provided.
Preparing to install
Before beginning the installation process, verify that you have all the necessary tools on hand. The following tools are required for proper installation:
Tools
#3 bit Phillips screwdriver
Stud fi nder
Electric drill
Drill bit (included)
5/16" (8mm) masonry drill bit for concrete/brick installation
Level (integrated level on product)
Allen Wrench (included)
Hammer (for concrete installations)
Package Contents
Make sure all the hardware has been included with your mount.
(1) Drill Bit
(3) 1-7/8" Drywall Screws
(3) Concrete Anchors
(2) Allen Wrenches
(4) M4x12mm Bolts
(4) M4x30mm Bolts
(4) 1/2" Spacers
(1) Security Bolt
(1) Phillips-Head Driver
Product diagram
TV Mount Plate
Adjustment Knob
Double Swing Arm Extension
Retainer Clip
Integrated Bubble Level
Wall Mount Plate
Security Bolt Position
Cord Management Channel
Operation and adjustment
Your RCA Flat Panel TV Wall Mount features an adjustable 15-degree tilt and
180-degree pan and swivel action for easy viewing.
To adjust the tilt:
1.
Locate the adjustment knob directly behind the TV mounting point.
2.
Loosen the knob by turning it counter-clockwise.
3.
Adjust the tilt to the desired level and re-tighten the knob to lock the adjustment in place.
To adjust the swivel:
1.
Simply move the extension arm into the desired position.
2.
If the joint is too tight or too loose, adjust the tightness of the joint.
3.
Locate the knob closest to the wall.
4.
Turn the knob counter-clockwise to loosen and clockwise to tighten.
Limited Lifetime Warranty
Audiovox Electronics Corporation (the “Company”) warrants to you the original retail purchaser of this product that should it, under normal use and conditions, be proven defective in material or workmanship during its lifetime while you own it, such defect(s) will be repaired or replaced (at the Company’s option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specifi cation of defect(s), transportation prepaid, to the Company at the address shown below.
Do not return this product to the Retailer.
This Warranty does not cover product purchased, serviced or used outside the
United States or Canada.
This Warranty is not transferable and does not extend to costs incurred for installation, removal or reinstallation of the product. This Warranty does not apply if in the Company’s opinion, the product has been damaged through alteration, improper installation, mishandling, misuse, neglect, or accident.
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO
EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE
PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO DURATION
OF THIS WARRANTY. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specifi c legal rights and you may also have other rights which vary from state/ province to state/province.
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd.,
Hauppauge, New York 11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door
16, Mississauga, Ontario L5T 3A5
Trademark(s) Registered
All other brands and product names are trademarks or registered trademarks of their respective owners.
© 2010 Audiovox Accessories Corporation www.rcaaccessories.com MAF40BKR_US_IB_03
solutions écran plat
Support mural pour TV LCD
Manuel d'installation
Pour téléviseurs de 13 à 27 po
Capacité de charge maximale – 40 lb (18 kg)
MAF40BKR
Merci d'avoir choisi une fi xation murale pour téléviseur à écran plat universelle RCA. Cette fi xation est compatible avec toutes les grandes marques de téléviseurs à écran plat de 13 à 27 po, de 40 lb (18 kg) et moins. Cette fi xation murale comprend un dispositif d'inclinaison de 0-15 degrés et de panoramique et de pivotement de 180 degrés qui facilite le visionnement. Avant de tenter de fi xer le téléviseur en place, retirez toutes les pièces de l'emballage et lisez attentivement les instructions d'installation.
AVERTISSEMENT : Toute utilisation de ce support avec un téléviseur d’un poids supérieur à 40 lb (18 kg), ou dont la taille de l’écran est supérieure à
27 po, peut provoquer une défaillance du support et par conséquent des dommages matériels et (ou) des blessures corporelles.
MISE EN GARDE :
Ce support mural est conçu pour supporter un poids maximal de
18 kg/40 lb. Son utilisation avec un poids supérieur au maximum indiqué pourrait causer de l’instabilité et des blessures. Respectez soigneusement les instructions d’installation et d’utilisation.
Mesures de précaution
Suivez ces précautions pour installer et la fi xer au téléviseur à écran plat en toute sécurité.
1.
Assurez-vous que la fi xation murale achetée convient à votre téléviseur. Vérifi ez de nouveau les limites de dimensions et de poids.
2.
Rassemblez les outils nécessaires avant d'entreprendre l'installation. Vous aurez besoin d'un tournevis Phillips à lame no 3, d'une perceuse électrique, d'une mèche (incluse), d'un niveau (intégré au produit), d'un localisateur de montants et d'un marteau (pour les installations sur brique et béton).
3.
Vous devez absolument fi xer la fi xation murale aux montants du mur. (Utilisez un localisateur de montants.)
4.
Utilisez le matériel fourni pour la fi xation. Ce matériel garantit une installation sûre et sécuritaire.
5.
Demandez à un électricien compétent de déplacer une prise de courant au besoin.
6.
N'oubliez pas d'acheter des fi ls suffi samment longs pour raccorder le téléviseur aux appareils audio et vidéo dans votre installation.
7.
Nous recommandons de faire appel aux services d'un installateur professionnel si vous craignez de ne pouvoir installer la fi xation murale du téléviseur seul.
Conservez votre coupon de caisse pour obtenir les pièces et le service sous garantie et comme preuve d'achat. Fixez-le ici et inscrivez le numéro de modèle.
No de modèle ___________________________________________________________
Date d'achat : ___________________________________________________________
Détaillant/adresse/téléphone ______________________________________________
Fiche technique
Modèle : MAF40BKR
Design en deux pièces surbaissé
Description : Fixation murale pour téléviseur à écran plat universelle
RCA à bras d'extension pivotant
Dimensions de téléviseur : 13 à 27 po
Charge maximale : 40 lb (18 kg)
Profi l min. :
Extension max. :
Inclinaison :
Pivotement :
2,7 po (6,9 cm)
9,6 po (24,4 cm)
+/- 0-15 °
180 °
Conforme VESA : 100/100
Niveau à bulle intégré / Système guide-cordon
Préparation pour l'installation
Avant d'entreprendre l'installation, assurez-vous d'avoir tous les outils nécessaires en main. Les outils suivants sont nécessaires pour réaliser une installation appropriée :
Outils
Tournevis Phillips à lame n o 3
Localisateur de montants
Perceuse électrique
Mèche (incluse)
Mèche à maçonnerie de 5/16 po (8 mm) pour béton/brique
Niveau (intégré au produit)
Clé Allen (incluse)
Marteau (pour installations sur béton)
Contenu de l'emballage
Assurez-vous que tout le matériel est inclus avec la fi xation.
(1) Mèche
(3) Vis à placoplâtre de 1 7/8 po
(3) Ancrages de béton
(2) Clé Allen
(4) Boulons M4 x 12 mm
(4) Boulons M4 x 30 mm
(4) Entretoises de 1/2 po
(1) Boulon de sécurité
(1) Outil pour vis Phillips
Schéma du produit
Plaque de fi xation du téléviseur
Bouton d'ajustement
Bras d'extension pivotant double
Bague de maintien
Niveau à bulle intégré
Plaque de fi xation murale
Position de boulon de sécurité
Guide-cordon
fl at panel solutions
LCD TV Wall Mount
Installation Manual
Fits TVs 13"- 27"
Maximum Load Capacity – 40 lbs. (18 kg)
MAF40BKR
Thank you for choosing a Universal
Flat Panel TV Wall Mount from RCA.
This mount can be used for all major brands of 13" - 27" fl at panel TVs,
40 lbs (18 kg) or under. This wall mount features a 0-15-degree tilt,
180-degree pan and swivel, and double swing arm extension for easy viewing. Before attempting to mount your television set, please remove all parts from this package and read the installation instructions carefully.
WARNING: Use of this mount with a TV weighing over 40 lbs. or with a screen larger than 27" could cause the mount to fail causing property damage and/or personal injury.
CAUTION:
This wall mount is intended for use only with the maximum weight of
18 kg/40 lbs. Use with heavier than the maximum weights indicated may result in instability causing possible injury. Follow the installation and operation instructions carefully.
Safety precautions
Follow these precautions to ensure safe installation and mounting of your fl at panel TV.
1.
Be sure you have purchased the correct wall mount for your TV. Recheck the size and weight constraints.
2.
Gather all necessary tools before you begin installation. You will need a #3 bit
Phillips screwdriver, electric drill, drill bit (included), level (integrated level on product), stud fi nder, and hammer (for brick and concrete installations).
3.
It is essential for the wall mount plate to be attached to wall studs.
(Use a stud fi nder.)
4.
Use the included hardware for mounting purposes. This hardware has been provided to ensure a safe and secure mount.
5.
Hire a licensed electrician to relocate an electrical outlet, if needed.
6.
Be sure to purchase wires long enough to connect the TV to the audio and video components in your installation.
7.
We recommend you hire a professional installer, if you have any concerns about installing the TV wall mount yourself.
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the model number.
Model No. _____________________________________________________________
Purchase Date: _________________________________________________________
Dealer/Address/Phone __________________________________________________
Specifi cations
Model:
Description:
TV Size Range:
Max. Load:
Min. Profi le:
Max. Extension:
Tilt:
MAF40BKR
Two-piece, low-profi le design
RCA Universal LCD TV Wall
Mount with Swing Arm Extension
13" – 27"
40 lbs. (18kg)
2.7" (6.9 cm)
9.6" (24.4 cm)
+/- 0-15°
Swivel:
VESA Compliant:
180°
100/100
Integrated Bubble Level / Cord Management System
Attaching wall mount plate
Drywall Installation
1.
Use a stud fi nder to locate a wood stud where you want to install the mount.
NOTE: It is required that the wall mount plate be attached to wall studs.
2.
Locate center of stud.
3.
Place the wall mount plate against the wall, with the cord management channel towards the bottom. Level it using the bubble guide. Mark the locations on the wall where the mount is to be installed.
4.
Drill holes at each marked location using the enclosed wood drill bit.
5.
Secure the wall mount plate to the wall, using one drywall screw, but do not completely tighten it yet.
6
. Using the integrated bubble level, carefully adjust the wall mount plate until it is level.
7.
Insert the remaining screws and tighten all three screws completely.
Concrete/Brick Installation
1.
Place the wall mount plate against the wall with the cord management channel towards the bottom.
2.
Using the integrated bubble level, mark off the position of the holes that will be used for securing the mount.
3.
Place the wall mount plate aside.
4.
Using an electric drill and a 5/16" (8mm) masonry bit, drill holes in the marked locations.
5.
Remove any excess dust from the holes.
6.
Insert a concrete anchor into each hole. If necessary, use a hammer to lightly tap each anchor into place so they are fl ush with the wall.
7.
Once both anchors are in place, place the wall mount plate back into position.
Using the integrated bubble level, carefully adjust the wall mount plate until it is level.
8.
Attach the wall mount plate, using the drywall screws provided.
9.
Make sure all screws are tightened and secure.
Attaching the TV mount plate
1.
Unplug your fl at panel TV before starting this step of the installation.
IMPORTANT: NEVER lay the TV face down as this may cause damage to the viewing surface.
2.
Before attaching the TV mount plate to the TV, determine which hardware to use. Examine the back of your TV. If the back is fl at, use the M4x12mm bolts.
If your TV has a recessed back, use the longer M4x30mm bolts and 1/2" spacers.
3.
After you have determined which bolts to use, attach the TV mount plate to the back of your TV.
NOTE: Be careful not to over-tighten the bolts.
Attaching the TV mount plate to the wall mount plate
1.
To complete the installation, slide the TV mount plate with your TV attached into the wall mount plate.
2.
The retainer clip on the top of the wall mount plate should click, indicating that the mount is secure.
3.
To remove the TV, push in on the clip and slide the TV mount plate up.
4.
For additional security and stability, insert the security bolt into the hole located at the base of the unit.
5.
Tighten, using the Allen Wrench provided.
Preparing to install
Before beginning the installation process, verify that you have all the necessary tools on hand. The following tools are required for proper installation:
Tools
#3 bit Phillips screwdriver
Stud fi nder
Electric drill
Drill bit (included)
5/16" (8mm) masonry drill bit for concrete/brick installation
Level (integrated level on product)
Allen Wrench (included)
Hammer (for concrete installations)
Package Contents
Make sure all the hardware has been included with your mount.
(1) Drill Bit
(3) 1-7/8" Drywall Screws
(3) Concrete Anchors
(2) Allen Wrenches
(4) M4x12mm Bolts
(4) M4x30mm Bolts
(4) 1/2" Spacers
(1) Security Bolt
(1) Phillips-Head Driver
Product diagram
TV Mount Plate
Adjustment Knob
Double Swing Arm Extension
Retainer Clip
Integrated Bubble Level
Wall Mount Plate
Security Bolt Position
Cord Management Channel
Operation and adjustment
Your RCA Flat Panel TV Wall Mount features an adjustable 15-degree tilt and
180-degree pan and swivel action for easy viewing.
To adjust the tilt:
1.
Locate the adjustment knob directly behind the TV mounting point.
2.
Loosen the knob by turning it counter-clockwise.
3.
Adjust the tilt to the desired level and re-tighten the knob to lock the adjustment in place.
To adjust the swivel:
1.
Simply move the extension arm into the desired position.
2.
If the joint is too tight or too loose, adjust the tightness of the joint.
3.
Locate the knob closest to the wall.
4.
Turn the knob counter-clockwise to loosen and clockwise to tighten.
Limited Lifetime Warranty
Audiovox Electronics Corporation (the “Company”) warrants to you the original retail purchaser of this product that should it, under normal use and conditions, be proven defective in material or workmanship during its lifetime while you own it, such defect(s) will be repaired or replaced (at the Company’s option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specifi cation of defect(s), transportation prepaid, to the Company at the address shown below.
Do not return this product to the Retailer.
This Warranty does not cover product purchased, serviced or used outside the
United States or Canada.
This Warranty is not transferable and does not extend to costs incurred for installation, removal or reinstallation of the product. This Warranty does not apply if in the Company’s opinion, the product has been damaged through alteration, improper installation, mishandling, misuse, neglect, or accident.
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO
EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE
PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO DURATION
OF THIS WARRANTY. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specifi c legal rights and you may also have other rights which vary from state/ province to state/province.
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd.,
Hauppauge, New York 11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door
16, Mississauga, Ontario L5T 3A5
Trademark(s) Registered
All other brands and product names are trademarks or registered trademarks of their respective owners.
© 2010 Audiovox Accessories Corporation www.rcaaccessories.com MAF40BKR_US_IB_03
solutions écran plat
Support mural pour TV LCD
Manuel d'installation
Pour téléviseurs de 13 à 27 po
Capacité de charge maximale – 40 lb (18 kg)
Merci d'avoir choisi une fi xation murale pour téléviseur à écran plat universelle RCA. Cette fi xation est compatible avec toutes les grandes marques de téléviseurs à écran plat de 13 à 27 po, de 40 lb (18
MAF40BKR
kg) et moins. Cette fi xation murale comprend un dispositif d'inclinaison de 0-15 degrés et de panoramique et de pivotement de 180 degrés qui facilite le visionnement. Avant de tenter de fi xer le téléviseur en place, retirez toutes les pièces de l'emballage et lisez attentivement les instructions d'installation.
AVERTISSEMENT : Toute utilisation de ce support avec un téléviseur d’un poids supérieur à 40 lb (18 kg), ou dont la taille de l’écran est supérieure à
27 po, peut provoquer une défaillance du support et par conséquent des dommages matériels et (ou) des blessures corporelles.
MISE EN GARDE :
Ce support mural est conçu pour supporter un poids maximal de
18 kg/40 lb. Son utilisation avec un poids supérieur au maximum indiqué pourrait causer de l’instabilité et des blessures. Respectez soigneusement les instructions d’installation et d’utilisation.
Mesures de précaution
Suivez ces précautions pour installer et la fi xer au téléviseur à écran plat en toute sécurité.
1.
Assurez-vous que la fi xation murale achetée convient à votre téléviseur. Vérifi ez de nouveau les limites de dimensions et de poids.
2.
Rassemblez les outils nécessaires avant d'entreprendre l'installation. Vous aurez besoin d'un tournevis Phillips à lame no 3, d'une perceuse électrique, d'une mèche (incluse), d'un niveau (intégré au produit), d'un localisateur de montants et d'un marteau (pour les installations sur brique et béton).
3.
Vous devez absolument fi xer la fi xation murale aux montants du mur. (Utilisez un localisateur de montants.)
4.
Utilisez le matériel fourni pour la fi xation. Ce matériel garantit une installation sûre et sécuritaire.
5.
Demandez à un électricien compétent de déplacer une prise de courant au besoin.
6.
N'oubliez pas d'acheter des fi ls suffi samment longs pour raccorder le téléviseur aux appareils audio et vidéo dans votre installation.
7.
Nous recommandons de faire appel aux services d'un installateur professionnel si vous craignez de ne pouvoir installer la fi xation murale du téléviseur seul.
Conservez votre coupon de caisse pour obtenir les pièces et le service sous garantie et comme preuve d'achat. Fixez-le ici et inscrivez le numéro de modèle.
No de modèle ___________________________________________________________
Date d'achat : ___________________________________________________________
Détaillant/adresse/téléphone ______________________________________________
Fiche technique
Modèle : MAF40BKR
Design en deux pièces surbaissé
Description : Fixation murale pour téléviseur à écran plat universelle
RCA à bras d'extension pivotant
Dimensions de téléviseur : 13 à 27 po
Charge maximale :
Profi l min. :
Extension max. :
Inclinaison :
Pivotement :
Conforme VESA :
40 lb (18 kg)
2,7 po (6,9 cm)
9,6 po (24,4 cm)
+/- 0-15 °
180 °
100/100
Niveau à bulle intégré / Système guide-cordon
Préparation pour l'installation
Avant d'entreprendre l'installation, assurez-vous d'avoir tous les outils nécessaires en main. Les outils suivants sont nécessaires pour réaliser une installation appropriée :
Outils
Tournevis Phillips à lame n o 3
Localisateur de montants
Perceuse électrique
Mèche (incluse)
Mèche à maçonnerie de 5/16 po (8 mm) pour béton/brique
Niveau (intégré au produit)
Clé Allen (incluse)
Marteau (pour installations sur béton)
Contenu de l'emballage
Assurez-vous que tout le matériel est inclus avec la fi xation.
(1) Mèche
(3) Vis à placoplâtre de 1 7/8 po
(3) Ancrages de béton
(2) Clé Allen
(4) Boulons M4 x 12 mm
(4) Boulons M4 x 30 mm
(4) Entretoises de 1/2 po
(1) Boulon de sécurité
(1) Outil pour vis Phillips
Schéma du produit
Plaque de fi xation du téléviseur
Bouton d'ajustement
Bras d'extension pivotant double
Bague de maintien
Niveau à bulle intégré
Plaque de fi xation murale
Position de boulon de sécurité
Guide-cordon
fl at panel solutions
LCD TV Wall Mount
Installation Manual
Fits TVs 13"- 27"
Maximum Load Capacity – 40 lbs. (18 kg)
MAF40BKR
Thank you for choosing a Universal
Flat Panel TV Wall Mount from RCA.
This mount can be used for all major brands of 13" - 27" fl at panel TVs,
40 lbs (18 kg) or under. This wall mount features a 0-15-degree tilt,
180-degree pan and swivel, and double swing arm extension for easy viewing. Before attempting to mount your television set, please remove all parts from this package and read the installation instructions carefully.
WARNING: Use of this mount with a TV weighing over 40 lbs. or with a screen larger than 27" could cause the mount to fail causing property damage and/or personal injury.
CAUTION:
This wall mount is intended for use only with the maximum weight of
18 kg/40 lbs. Use with heavier than the maximum weights indicated may result in instability causing possible injury. Follow the installation and operation instructions carefully.
Safety precautions
Follow these precautions to ensure safe installation and mounting of your fl at panel TV.
1.
Be sure you have purchased the correct wall mount for your TV. Recheck the size and weight constraints.
2.
Gather all necessary tools before you begin installation. You will need a #3 bit
Phillips screwdriver, electric drill, drill bit (included), level (integrated level on product), stud fi nder, and hammer (for brick and concrete installations).
3.
It is essential for the wall mount plate to be attached to wall studs.
(Use a stud fi nder.)
4.
Use the included hardware for mounting purposes. This hardware has been provided to ensure a safe and secure mount.
5.
Hire a licensed electrician to relocate an electrical outlet, if needed.
6.
Be sure to purchase wires long enough to connect the TV to the audio and video components in your installation.
7.
We recommend you hire a professional installer, if you have any concerns about installing the TV wall mount yourself.
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the model number.
Model No. _____________________________________________________________
Purchase Date: _________________________________________________________
Dealer/Address/Phone __________________________________________________
Attaching wall mount plate
Drywall Installation
1.
Use a stud fi nder to locate a wood stud where you want to install the mount.
NOTE: It is required that the wall mount plate be attached to wall studs.
2.
Locate center of stud.
3.
Place the wall mount plate against the wall, with the cord management channel towards the bottom. Level it using the bubble guide. Mark the locations on the wall where the mount is to be installed.
4.
Drill holes at each marked location using the enclosed wood drill bit.
5.
Secure the wall mount plate to the wall, using one drywall screw, but do not completely tighten it yet.
6
. Using the integrated bubble level, carefully adjust the wall mount plate until it is level.
7.
Insert the remaining screws and tighten all three screws completely.
Concrete/Brick Installation
1.
Place the wall mount plate against the wall with the cord management channel towards the bottom.
2.
Using the integrated bubble level, mark off the position of the holes that will be used for securing the mount.
3.
Place the wall mount plate aside.
4.
Using an electric drill and a 5/16" (8mm) masonry bit, drill holes in the marked locations.
5.
Remove any excess dust from the holes.
6.
Insert a concrete anchor into each hole. If necessary, use a hammer to lightly tap each anchor into place so they are fl ush with the wall.
7.
Once both anchors are in place, place the wall mount plate back into position.
Using the integrated bubble level, carefully adjust the wall mount plate until it is level.
8.
Attach the wall mount plate, using the drywall screws provided.
9.
Make sure all screws are tightened and secure.
Attaching the TV mount plate
1.
Unplug your fl at panel TV before starting this step of the installation.
IMPORTANT: NEVER lay the TV face down as this may cause damage to the viewing surface.
2.
Before attaching the TV mount plate to the TV, determine which hardware to use. Examine the back of your TV. If the back is fl at, use the M4x12mm bolts.
If your TV has a recessed back, use the longer M4x30mm bolts and 1/2" spacers.
3.
After you have determined which bolts to use, attach the TV mount plate to the back of your TV.
NOTE: Be careful not to over-tighten the bolts.
Specifi cations
Model:
Description:
TV Size Range:
Max. Load:
Min. Profi le:
Max. Extension:
Tilt:
MAF40BKR
Two-piece, low-profi le design
RCA Universal LCD TV Wall
Mount with Swing Arm Extension
13" – 27"
40 lbs. (18kg)
2.7" (6.9 cm)
9.6" (24.4 cm)
+/- 0-15°
Swivel:
VESA Compliant:
180°
100/100
Integrated Bubble Level / Cord Management System
Preparing to install
Before beginning the installation process, verify that you have all the necessary tools on hand. The following tools are required for proper installation:
Tools
#3 bit Phillips screwdriver
Stud fi nder
Electric drill
Drill bit (included)
5/16" (8mm) masonry drill bit for concrete/brick installation
Level (integrated level on product)
Allen Wrench (included)
Hammer (for concrete installations)
Package Contents
Make sure all the hardware has been included with your mount.
(1) Drill Bit
(3) 1-7/8" Drywall Screws
(3) Concrete Anchors
(2) Allen Wrenches
(4) M4x12mm Bolts
(4) M4x30mm Bolts
(4) 1/2" Spacers
(1) Security Bolt
(1) Phillips-Head Driver
Product diagram
TV Mount Plate
Adjustment Knob
Double Swing Arm Extension
Retainer Clip
Integrated Bubble Level
Wall Mount Plate
Security Bolt Position
Cord Management Channel
Attaching the TV mount plate to the wall mount plate
1.
To complete the installation, slide the TV mount plate with your TV attached into the wall mount plate.
2.
The retainer clip on the top of the wall mount plate should click, indicating that the mount is secure.
3.
To remove the TV, push in on the clip and slide the TV mount plate up.
4.
For additional security and stability, insert the security bolt into the hole located at the base of the unit.
5.
Tighten, using the Allen Wrench provided.
Operation and adjustment
Your RCA Flat Panel TV Wall Mount features an adjustable 15-degree tilt and
180-degree pan and swivel action for easy viewing.
To adjust the tilt:
1.
Locate the adjustment knob directly behind the TV mounting point.
2.
Loosen the knob by turning it counter-clockwise.
3.
Adjust the tilt to the desired level and re-tighten the knob to lock the adjustment in place.
To adjust the swivel:
1.
Simply move the extension arm into the desired position.
2.
If the joint is too tight or too loose, adjust the tightness of the joint.
3.
Locate the knob closest to the wall.
4.
Turn the knob counter-clockwise to loosen and clockwise to tighten.
Limited Lifetime Warranty
Audiovox Electronics Corporation (the “Company”) warrants to you the original retail purchaser of this product that should it, under normal use and conditions, be proven defective in material or workmanship during its lifetime while you own it, such defect(s) will be repaired or replaced (at the Company’s option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specifi cation of defect(s), transportation prepaid, to the Company at the address shown below.
Do not return this product to the Retailer.
This Warranty does not cover product purchased, serviced or used outside the
United States or Canada.
This Warranty is not transferable and does not extend to costs incurred for installation, removal or reinstallation of the product. This Warranty does not apply if in the Company’s opinion, the product has been damaged through alteration, improper installation, mishandling, misuse, neglect, or accident.
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO
EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE
PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO DURATION
OF THIS WARRANTY. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specifi c legal rights and you may also have other rights which vary from state/ province to state/province.
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd.,
Hauppauge, New York 11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door
16, Mississauga, Ontario L5T 3A5
Trademark(s) Registered
All other brands and product names are trademarks or registered trademarks of their respective owners.
© 2010 Audiovox Accessories Corporation www.rcaaccessories.com MAF40BKR_US_IB_03
solutions écran plat
Support mural pour TV LCD
Manuel d'installation
Pour téléviseurs de 13 à 27 po
Capacité de charge maximale – 40 lb (18 kg)
Merci d'avoir choisi une fi xation murale pour téléviseur à écran plat universelle RCA. Cette fi xation est compatible avec toutes les grandes marques de téléviseurs à écran plat de 13 à 27 po, de 40 lb (18 kg) et moins. Cette fi xation murale
MAF40BKR
comprend un dispositif d'inclinaison de 0-15 degrés et de panoramique et de pivotement de 180 degrés qui facilite le visionnement. Avant de tenter de fi xer le téléviseur en place, retirez toutes les pièces de l'emballage et lisez attentivement les instructions d'installation.
AVERTISSEMENT : Toute utilisation de ce support avec un téléviseur d’un poids supérieur à 40 lb (18 kg), ou dont la taille de l’écran est supérieure à
27 po, peut provoquer une défaillance du support et par conséquent des dommages matériels et (ou) des blessures corporelles.
MISE EN GARDE :
Ce support mural est conçu pour supporter un poids maximal de
18 kg/40 lb. Son utilisation avec un poids supérieur au maximum indiqué pourrait causer de l’instabilité et des blessures. Respectez soigneusement les instructions d’installation et d’utilisation.
Mesures de précaution
Suivez ces précautions pour installer et la fi xer au téléviseur à écran plat en toute sécurité.
1.
Assurez-vous que la fi xation murale achetée convient à votre téléviseur. Vérifi ez de nouveau les limites de dimensions et de poids.
2.
Rassemblez les outils nécessaires avant d'entreprendre l'installation. Vous aurez besoin d'un tournevis Phillips à lame no 3, d'une perceuse électrique, d'une mèche (incluse), d'un niveau (intégré au produit), d'un localisateur de montants et d'un marteau (pour les installations sur brique et béton).
3.
Vous devez absolument fi xer la fi xation murale aux montants du mur. (Utilisez un localisateur de montants.)
4.
Utilisez le matériel fourni pour la fi xation. Ce matériel garantit une installation sûre et sécuritaire.
5.
Demandez à un électricien compétent de déplacer une prise de courant au besoin.
6.
N'oubliez pas d'acheter des fi ls suffi samment longs pour raccorder le téléviseur aux appareils audio et vidéo dans votre installation.
7.
Nous recommandons de faire appel aux services d'un installateur professionnel si vous craignez de ne pouvoir installer la fi xation murale du téléviseur seul.
Conservez votre coupon de caisse pour obtenir les pièces et le service sous garantie et comme preuve d'achat. Fixez-le ici et inscrivez le numéro de modèle.
No de modèle ___________________________________________________________
Date d'achat : ___________________________________________________________
Détaillant/adresse/téléphone ______________________________________________
Fiche technique
Modèle :
Description :
MAF40BKR
Design en deux pièces surbaissé
Fixation murale pour téléviseur à écran plat universelle
RCA à bras d'extension pivotant
Dimensions de téléviseur : 13 à 27 po
Charge maximale : 40 lb (18 kg)
Profi l min. :
Extension max. :
Inclinaison :
2,7 po (6,9 cm)
9,6 po (24,4 cm)
+/- 0-15 °
Pivotement :
Conforme VESA :
180 °
100/100
Niveau à bulle intégré / Système guide-cordon
Préparation pour l'installation
Avant d'entreprendre l'installation, assurez-vous d'avoir tous les outils nécessaires en main. Les outils suivants sont nécessaires pour réaliser une installation appropriée :
Outils
Tournevis Phillips à lame n o 3
Localisateur de montants
Perceuse électrique
Mèche (incluse)
Mèche à maçonnerie de 5/16 po (8 mm) pour béton/brique
Niveau (intégré au produit)
Clé Allen (incluse)
Marteau (pour installations sur béton)
Contenu de l'emballage
Assurez-vous que tout le matériel est inclus avec la fi xation.
(1) Mèche
(3) Vis à placoplâtre de 1 7/8 po
(3) Ancrages de béton
(2) Clé Allen
(4) Boulons M4 x 12 mm
(4) Boulons M4 x 30 mm
(4) Entretoises de 1/2 po
(1) Boulon de sécurité
(1) Outil pour vis Phillips
Schéma du produit
Plaque de fi xation du téléviseur
Bouton d'ajustement
Bras d'extension pivotant double
Bague de maintien
Niveau à bulle intégré
Plaque de fi xation murale
Position de boulon de sécurité
Guide-cordon
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Frequently Answers and Questions
What is the maximum weight capacity of the RCA MAF40BKR TV wall mount?
What size TVs is the RCA MAF40BKR TV wall mount compatible with?
What features does the RCA MAF40BKR TV wall mount have?
What hardware is included with the RCA MAF40BKR TV wall mount?
What tools are required to install the RCA MAF40BKR TV wall mount?
advertisement