advertisement
▼
Scroll to page 2
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Frequently Answers and Questions
What's the frequency response of this power amplifier?
The frequency response is 20 Hz to 20 kHz with a tolerance of ±0.5 dB.
How many channels does the Model 150 have?
This amplifier is a mono-block amplifier, meaning it has only one channel.
What is the power output of the Model 150?
The Model 150 can deliver 50 watts RMS into 8 ohms with less than 0.10% THD at 1 kHz, 65 watts RMS into 8 ohms with 1% THD at 1 kHz, and 100 watts RMS into 4 ohms with less than 0.10% THD at 1 kHz.
What are suitable speakers to use with this amplifier?
The Model 150 is ideally paired with a pair of Rosebud MKII or Spirit speakers, connected with 336J speaker cable. It can also drive any in-wall speaker system.
How do I turn on the Model 150?
Simply press the power pushbutton on the front panel.
What is the input impedance of the Model 150?
The input impedance is 47 Kohm.
What is the input sensitivity of the Model 150?
The input sensitivity is 0.4 volts.
What are the dimensions of the Model 150?
The dimensions are 16.25 inches long, 2.75 inches wide, and 5.25 inches high (41.5 x 7.0 x 13.4 cm).
How much does the Model 150 weigh?
The Model 150 weighs 10 pounds (4.5 kg).
What is the signal-to-noise ratio of the Model 150?
The signal-to-noise ratio is greater than 74 dB, unweighted, referenced to 1 watt at 8 ohms.
advertisement