Motorola ROKR Z6m Programming Steps

Motorola ROKR Z6m Programming Steps
STEP
ACTION
1
Enter the following into the phone without stopping - #+0+7+3+8+8+7+*.
• Phone will prompt user to the Security Code.
2
Enter 2+3+6+1+9+7 and press “OK”.
• You are now in Programming Menu.
3
Scroll down to “User Activation” and press “Select” using left soft key.
• Phone will prompt user to enter the Subsidy Password.
4
Enter the OTSL or MSL code and press “OK”.
5
With the “MIN” selected, press the center navigation key.
6
Use the “CLR” key to delete existing digits.
7
Enter the 10 digit MSID and press “OK” With the “MDN” selected, press the
center navigation key.
8
Use the “CLR” key to delete existing digits.
9
Enter the 10 digit MDN and press “OK”.
10
Press “Done” and then press “Exit”.
• Phone will reset and is now programmed.