- Entertainment & hobby
- Video games & consoles
- Game console accessories
- RocketFish
- RF-GSL010A
- Quick Setup guide
Rocketfish RF-GSL010A Quick Setup Guide
Add to my manuals2 Pages
RocketFish RF-GSL010A DJ Hero™ Stand is designed to provide a sturdy and adjustable platform for your DJ Hero™ turntable accessory. The stand is made of durable material and features two height levels to accommodate different user preferences. The stand has been carefully designed to ensure the stability of your turntable and prevent any accidents. Please make sure not to exceed the weight limit of 15 lbs. (6.8 kg) and to use the stand only with DJ Hero™ turntables to ensure your safety.
advertisement
DJ Hero™ Stand
Package contents
2 Insert one stand foot into the longer arm on the center crossbar.
Center crossbar Top supports (2) Top cradle bars (2)
3 Locate the two holes on the center crossbar. These holes determine the height of the stand.
4 Align the two holes in the crossbar with the holes in the feet to set the height, then insert a bolt clip through each of the holes.
Base bar Stand feet (2) Bolt clips (4) Quick Setup Guide
Product features
• Designed for use with DJ Hero™ turntables for PlayStation®2,
PlayStation®3, Xbox 360®, and Wii™
• Made of sturdy, durable material
• Adjustable stand provides two height levels
Setting up the stand
1 Hold the stand feet upright.
Higher Lower
5 Repeat Steps 1 through 4 to attach the second stand foot.
Higher level Lower level
RF-GSL010A
QUICK SETUP GUIDE
6 Insert a top cradle bar into one of the shorter arms on the center crossbar.
10 Slide out the pole on the base bar until it locks into place.
Locked
7 Align the holes on the top cradle bar and crossbar, then insert a bolt clip through the holes.
11 Insert the base bar into the stand feet until it locks into place.
8 Repeat Steps 6 and 7 to attach the other top cradle bar.
12 Place the turntable on the stand.
CAUTION: This stand is intended only for use with a DJ Hero™ turntable accessory. Using the stand for other products or objects, particularly those weighing more than 15 pounds, may result in instability, which may cause injury. When the turntable is on the stand, do not lift the stand by the posts.
9 Snap the top supports onto the cradle bars. Make sure that the rounded clips on the supports are on top of the cradle bars.
Specifi cations
• Compatible with PlayStation®2, PlayStation®3, Xbox 360®, and Wii™
• Stand dimensions: 26.57 × 19.09 × 29.92 (low) / 35.83 (high) inches
(67.5 × 48.5 × 76 (low) / 91 (high) cm)
• Individual product weight: 7.34 lbs. (3.345 kg)
• Weight limit: approximately 15 lbs. (6.8 kg)
90-day limited warranty
Visit www.rocketfi shproducts.com for details.
© 2010 BBY Solutions, Inc. All rights reserved. ROCKETFISH is a trademark of
BBY Solutions, Inc. All other products and brand names are trademarks of their respective owners.
ENGLISH 10-0798
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project