advertisement
▼
Scroll to page 2
2 1 J2 RCAX4 J3D RCAX4 J3C 1U 1U C601 5 LEFT IN 1U C501 4 RIGHT IN J3B LEFT IN RCAX4 1U C301 1 C401 2 RIGHT J3A IN RCAX4 4.99K XLR F PC R201 10U C202 8 1U C204 3 3 2 3 6 U5B +12V +Bias 5 6 C12 503 4560 C602 7 4560 C502 7 27PF 4560 U5A +12V 4 +Bias 3 2 1 U4B P4A P100K X2 +Bias 5 6 +12V C402 4560 C302 U4A P100K X2 P3A 1 5 6 5 6 27PF U2B 4560 27PF C13 503 Q1 2N3904 7 7 R602 47K R502 47K R402 47K R302 47K +12V R206 33K C205 4560 C106 120PF U1B +12V +12V 27PF 1 1 +12V .001 C206 27PF R205 +Bias 22K 330 R204 +Bias 330 R104 R105 33k 7 R203 330 SW DIP-6 SW1E PHAN PWR R202 4.99K P100K X2 P4B R501 10K R601 10K SW1F SW DIP-6 PHAN PWR R102 4.99K C203 10U 6 C104 1U C103 1U 1U +Bias P100K X2 P3B 6 4 R301 10K 5 R401 10K 3 C201 1U XLR F PC R101 4.99K 2 1 8 8 +12V R7 C14 503 LEFT IN J6 RIGHT IN 1 C15 503 ROLLS CORPORATION SALT LAKE CITY, UTAH 11/08 R801 4.7K 10U C701 10U C801 1 U9B 4560 7 R803 22K R703 22K +Bias 3 2 4560 R303 47K +Bias 5 6 +12V 1 BASS R604 BASS C1 470uf 63v H1A HD5 +12V 4560 47K R705 22K MONO +12V 18K R2 R3 22K +Bias J113 Q6 R707 22K R706 22K 1N4148 1K R114 R113 1K R214 1K J4C RCAX4 NO D3 OR R1 IN MX153 D3 ZD 5V IN MA2355 AND MA1705 ONLY R1 680 OHM IN MA2152 ONLY PRODUCTION UNITS MAY VARY DRAWING FOR REFERENCE ONLY NOTES C809 503 1N4148 R609 1M D11 4 RECORD OUT J4D RCAX4 C111 10U 1 Document Number: MX153.SCH Size: Date: 22 OCTOBER 2008 Rb MX153 MIXER BOARD Murray, Utah 84107 USA 5968 S 350 W ROLLS CORPORATION Title IF YOU ARE COPYING THIS - STOP IT - DO YOUR OWN ENGINEERING C2 47U +Bias H1E HD5 H1D HD5 7 H1C HD5 R822 33K U11B 4560 R607 1M R608 22K R606 33K J113 R310 22K C211 10U 5 47K 4560 R18 1K C110 27PF R112 U12A D12 +Bias 3 2 R309 22K +Bias Q5 R308 1 SW1A SW DIP-6 U11A 1M +Bias 4 5 6 R306 33K 4560 7 H1B HD5 P7B P100K X2 R1 680 1N751A D3 33K R821 6 TREBLE C808 220PF R605 22K 4 R312 1 +12V 120PF 220K R16 D13 1N4148 C210 7 U12B R307 +Bias 3 2 1 C807 .047 P6B P100K X2 6 47K R210 10U +Bias 5 6 LM358 C904 U3B 33K P7A P100K X2 TREBLE R311 3 C806 220PF R305 22K 1N400X D1 4560 3 C403 .047 P6A P100K X2 33K 5 R904 6 47K +Bias +12V DUCK RECTIFIER 1N4148 D14 7 33K R304 33K 47K U10B 1 LM358 C902 27PF R603 U3A 330K R903 DUCK AMP U10A 47K R704 SW1B SW DIP-6 3 C901 .1 UF 2 R902 10K +Bias ROLLS PS27 OR 12-16VDC J5 JAPDC 2 3 1 +12V +Bias 5 6 4560 C702 27PF Text C802 27PF P100K X2 P5B 4 +Bias 3 2 U9A P100K X2 P5A 1 10 R116 100K DUCK ENABLES R901 10K 3 SW DIP-6 SW1C STEREO SOURCE 3 MIC 1 STEREO R802 4.7K 6 R702 4.7K 3 C209 .01 UF 47K R110 47K R111 C109 .01 UF 0 MIC 1 TONE MIC ONE 10 0 MIC TWO OUTPUT Noise Floor: S/N Ratio: Priority Attenuation: Power: Size: Weight: 10 MADE IN USA www.rolls.com 3 Input Impedance: Mic: Source: Max Input Level: Mic: Source: Connectors: Phantom Power: Max Gain: Mic: Source: Tone Controls: 0 SOURCE ONE 10 MIC 2 TONE 2 0 SOURCE INPUTS 1 MONO +Bias P100K P9 C108 .1 UF +Bias 4.7K R109 P100K P8 .1 UF R209 4.7K C208 4.7K R208 1K SW1D R9 R701 4.7K 1 1 R108 4.7K R10 1K RCAX4 2 +12V J4B 4560 U2A 3.5STJK Phan Pwr Reg C5 47U 4560 C207 27PF +Bias 3 2 P100K P2 LEVEL U1A C107 27PF +Bias 3 2 LEVEL P100K P1 100KRCAX4 J4A LEVEL R207 4.7K R107 4.7K 4 4 C105 120PF R106 33K 3 330 R103 SW DIP-6 3 8 SOURCE 3 (1) MONO 2 11 C102 2 2 9 4 2 5 4 C101 1U 4 4 4 8 3 6 5 5 4 8 2 8 8 4 2 2 1 12 1 3 8 5 5 8 4 75889 01530 0 5 4 6 6 J1 Sheet 1 of 1 Rev: A SCHEMATIC MX153 MixMate Mic/Line Mixer SOURCE TWO 10 0 SOURCE THREE 10 MADE IN USA on IN 3 BASS + MIXMATE ◗ PHAN POWER ◗ SOURCE 3 MONO ◗ PRIORITY ON / OFF MIC 2 TREBLE + MX153 pwr OFF=UP ON=DOWN MIC 1 MODEL MX153 SPECIFICATIONS 600 Ohms XLR balanced 22K Ohms RCA -14 dBV Mic level Max 24 dBV 2: XLR, 8: Stereo RCA +12 VDC 60 dBV 26 dBV +/-12 dB 100 Hz Bass +/-12 dB 11kHz Treble - 80 dB 96 dB 60 dB 12VDC / 200 mA 5.4” x 1.7” x 5.5” 2 lbs Start Guide INTRODUCTION Thank your for your purchase of the Rolls MX153 MixMate. The MX153 is a two microphone, three source stereo mixer designed for restaurants, schools, churches, clubs etc. The unit provides a compact and efficient way to mix sources such as AM/FM tuners, CD players, and video players with dynamic or condenser microphones. Priority talk over is provided on Microphone One for paging, and on Source Three for a jukebox, telephone, etc. NOTE: THIS MANUAL ASSUMES THE USER HAS A WORKING KNOWLEDGE OF AUDIO ELECTRONICS, BALANCED AND UNBALANCED CONNECTIONS, AND PROPER SIGNAL LEVEL SETTING. INSPECTION / WARRANTY 1. Unpack and inspect the MX153 box and package. If obvious physical damage is noticed, contact the carrier immediately to make a damage claim. We suggest saving the shipping carton and packing materials for safely transporting the unit in the future. 2. Please visit our web site at www.rolls.com and click on the Register Your Warranty Here button, or complete the Warranty Registration Card and return it to the factory. DESCRIPTION FRONT PANEL condenser microphones. CONNECTION Inputs Connect low impedance microphones to the Mic XLR inputs. If a paging microphone is being used, connect it to Mic Input 1 so it may be used with the Talk Over function. Connect source signals such as CD players, cassette players or video players to the RCA Source Inputs. If a jukebox is being connected, and you want its signal to mute the other source signals, connect it to Source input 3. Output Connect a stereo RCA cable to the main Output jack, and to an amplifier or the next device in your signal chain. Shown here is a connection example for the MX153. 0 0 0 PS27 MODEL MX153 0 MIC 1 TONE MIC ONE 10 0 MIC TWO 10 0 10 0 SOURCE ONE MIC 2 TONE 10 0 SOURCE TWO 10 SOURCE THREE IN 3 - + BASS MIXMATE MADE IN USA - + TREBLE MX153 pwr Mic 1, 2: Adjust the level of signal from the corresponding Mic Input. TONE 1, 2: Adjusts the frequency content of the microphone signal in the channel. When the control is turned counter-clockwise, the high frequencies are cut, when the control is turned clockwise, the low frequencies are cut. Source 1 - 3: Adjust the volume of input from the RCA Source Inputs. IN 3: Front panel 1/8” stereo input, linked to source 3. Bass: Adjusts the low frequencies of the Source 1 and 2 signals only. Treble: Adjusts the high frequencies of the Source 1 and 2 signals only. pwr: LED indicating power is applied to the MX152 and the unit is on. REAR PANEL STEREO SOURCE 3 MIC 1 STEREO MADE IN USA www.rolls.com 2 1 MONO SOURCE INPUTS 3 DIP SWITCH SETTINGS (From left to right) • The Mono/Stereo switch selects the output mode. When the switch is up, the unit is in stereo mode. When the switch is down, the stereo signals are mixed to mono and sent to both the Right and Left Main output jacks. Either jack can be used as a mono output. • Source 3 Priority: when in the down position, Source 1,and 2 will be “ducked” or muted by the signals at Source 3. This function is for jukebox priority. With a jukebox connected to Source input 3, and the Talk over switch 2 on (down), the other Source input signals such as background music, will be muted and only the jukebox will be heard. OFF=UP ON=DOWN OUTPUT OPERATION on MIC 2 ◗ PHAN POWER ◗ SOURCE 3 MONO ◗ PRIORITY ON / OFF MIC 1 MODEL MX153 12VDC / 200 mA: Power input connector. Connects to the Rolls PS27 Power Adapter. OUTPUT: Stereo RCA jacks, contains all mixed signals. SOURCE INPUTS: Stereo RCA jacks, Channels 1 - 3, for connection to stereo sources such as AM/FM tuners, cassette players, cd players, or video players. DIP SWITCH: Contains the small switches for engaging Mic 1, 2 phantom power, Source 3 Stereo or Mono, the priority (Talk Over) functions, and the Mono/Stereo select. MICROPHONE ONE and TWO: Balanced XLR inputs to be connected to dynamic or • Mic 1 Priority; when in the down position, all program material on Mic 2, Source 1 and 2 inputs will be “ducked” or muted when a signal is present at Mic 1. Source 3 is left unmuted. This function is used for paging. • Source 3 Mono; this switch sums the Right and Left inputs of Source 3 to a mono signal. • If a microphone requires phantom power, move the Mic channel’s corresponding PHAN DIP switch to the down position. This applies 12 volts dc phantom power to the indicated microphone.
advertisement
Related manuals
advertisement