- Vehicles & accessories
- Motor vehicle electronics
- Car media receivers
- Rosen Entertainment Systems
- DS-MZ0830-N11
- Quick start Guide
advertisement
In-Dash Multi-Media /
Navigation System
DS-GM0710
System Features
High resolution, touch-screen LCD display
Navigation includes text-to-speech voice and visual turn-by-turn directions, 5 Million+ Points-Of-Interest library, 3D route and building views for major cities, plus 3 language options (English, Spanish, French-Canadian)
Play DVD movies, audio CDs or discs with MP3 music files
AM-FM stereo tuner with 24 station presets (18 FM, 6 AM)
Bluetooth Hands-Free interface with built-in microphone
iPod TM interface
XM Satellite Radio ready
Supports the vehicle’s steering wheel controls
USB & SD Card ports for multi-media playback (SD on some models)
Back-Up Camera and/or sensor ready
Dual Zone interface for optional rear seat displays
Custom DVD Splash Screen capable
Notices
NOTICE OF INTENDED USE
Some features of Rosen Entertainment Systems are not intended for viewing by the driver when the vehicle is in motion, such as movie playback. When using navigation, minimize the amount of time spent viewing the screen and use voice prompts as much as possible. Avoid prolonged use of the touch screen controls. Such use might distract the driver or interfere with the driver’s safe operation of the vehicle, and thus result in serious injury or death. Such use might also violate state or local laws.
Rosen Entertainment Systems disclaims any liability for any bodily injury or property damage that might result from any improper or unintended use.
Controls & Basic Operations
1
2
3
4
5
6
7
8
- IMPORTANT -
More detailed system operating instructions are located in the Owner’s Manuals
9
10
11
12
13
14
15
8
18
1
17 16
Figure 1.
Control Button Details (as shown in Figure 1.)
1 When in DVD/CD Mode, press to
Pause or Play.
2 Microphone for Bluetooth hands-free-
3 Turn the knob to adjust the volume.
Press in to turn system ON/OFF.
4 5 play the Next/Previous Preset station.
Press and hold to scan for stations.
When in DVD, or iPod TM Mode, press to select the Next/Previous song or chapter.
6 Press to cycle through FM and AM or
XM if equipped.
7 Mute/Unmute
8
CD/DVD/MP3 Disc Slot
9
10
Eject button for DVD Mode.
System reset (if required). Use a paper clip (or similar) to press.
11 When in Radio Mode, turn the knob to select the station. Press to select
Bass, Mid, Treble Audio Modes. Turn to adjust tone.
12 Enter/Exit Navigation Mode (navigation can only be exited by pressing this button).
13
14
Press repeatedly to cycle through different sources.
Press to enter main menu.
15 Press to change audio equalizer presets.
16 Mini USB for external media device.
17 SD Card Slot (for navigation only).
18 SD Card Slot
2
Turn System On/Off
Vehicle ignition must be On or in ACC Mode to operate system.
Press the Left Knob on the panel to turn the system ON/OFF (Figure 2).
Volume Adjustment
Turn the Left Knob on the panel to adjust the volume (Figure 2.).
Main Menu
From any other screen, touch to enter
Main Menu (Figure 3.) The Main Menu includes TV, Bluetooth, iPod TM , Radio,
XM, DVD, AV, Navigation and Setup.
Figure 2.
Figure 3.
For detailed information of these functions, please refer to the “User’s Manual”.
TV Bluetooth iPod TM AM/FM Radio SAT Radio
DVD Auxiliary Input Navigation System Setup Return
3
Navigation
Before using the Rosen Navigation software, read this entire manual. Make sure that you are familiar with the system’s features and know how to operate the system.
Glance at the screen only when necessary and safe to do so. Let the computer voice guide you. If prolonged viewing is necessary, pull off the road to a safe location.
I ntroduction to Your Rosen Navigation
Rosen Navigation provides turn-by-turn visual and voice assistance to direct you to your selected destination. It quickly calculates step-by-step directions to any destination available on the included navigation map.
Rosen Navigation uses Global Positioning System (GPS) satellites, and a digital roadway map database to calculate and display travel directions. The system’s GPS antenna receives signals from a constellation of 24 satellites orbiting the earth and uses the strongest of signals, to determine your position to within meters.
_______________________________________________________
Before operating your Rosen Navigation system, please carefully read and follow the instructions provided in the “Safety Information and Precautions” located on Page 14 of this Quick Start Guide.
_______________________________________________________
For Complete Operating Instructions
Please refer to the Rosen Navigation User’s Manual to find complete instructions on the operation and many features of the Rosen Navigation System.
Initial Touch Screen Calibration
You may need to calibrate the touch screen when the system is first used. To do this, enter the
Navigation Mode immediately after you turn the system on. Follow the Information screens as indicated.
4
Start Up/Main Menu
When the Rosen Navigation software starts, you will see the reminder warning to use your
Rosen Navigation software safely and lawfully.
Note: Please refer to the User’s Manual for additional information and warning on the proper use of the Rosen Navigation product.
Warning Screen Main Menu
The Attention screen is displayed each time the system is turned ON as a reminder to make use of the navigational aids in a safe manner.
Select to display the map view
Main Menu Option
Find
Manage
Route
Settings
Select this Option to...
Pick a destination for routing
Organize or select saved routes or Points-Of-Interest
Edit or cancel a route in progress
Set preferences for routing, map, screen, navigation and more
5
Find Address Screen
Select state name
Select from previously used city
Select from previously used city
Enter street name
Enter street address number
Indicates distance to and direction of next turn
Previous screen
Map View Screens
Next turn street or HWY
65
Touch here to bring up arrow and 3D options
2D/3D map view options
To avoid delays or change route
Opens cursor menu
Return to navi menu
Compass
GPS strength and quick menu option
Indicates posted HWY speed
Button Select this Option to...
Zoom the map view in and out
Horizon up/down adjustment for 3D view
3 screen view options can modify toyour preference
Return to current GPS position
6
Button Select this Option to...
Switch map display between
2D and 3D views.
Display menu, jump to Main
Menu
Points of Interest Screen
POI Menu Option
Around Address
Around Cursor
Around GPS Position
Around Destination
Along Route
Select this Option to...
Find POI by state, city and address
Find POI by a cursor or location you have selected
Locate POI by your current satellite location
Find POI around your final destination
Find POI along your current route
NOTE: Once you have selected your POI Menu Option and entered the requested data, the screen will switch to the POI Category Screen.
7
Set-Up Menu
You may customize the Rosen Navigation software to your own preferences. Select Settings from the Navigation Menu. You have 8 user preference categories shown on 2 screens, the second located by pressing the right arrow . In each of the 8 user preference categories, there are numerous options that can be changed.
Screen 1
Fine tune the appearance of the map screen
Route settings
Set how the system navigates
Change settings for language, voice, measurements, time, etc.
Screen 2
Modify look and behavior of menu screens
Enable and disable driving warnings such as speeding
Set connection to
TMC receiver (if equipped)
Information on maps and licenses included
Help For further explanations of screen options, press the Help button located on the lower
Right Hand side of screen (if shown).
8
Bluetooth Hands-Free
The system provides Bluetooth Hands-Free communication function. If your mobile phone is
Bluetooth enabled, it can establish a point-to-point connection with the system, providing telephone dial up, call answering, Phonebook and Bluetooth music play functions.
Note: Bluetooth modules and software of cell-phones vary by brand and date of manufacture.
Some functions may be different or not compatible with this system during actual use.
Enter/Exit
To Enter: From Main Menu (Figure 3.) touch the icon.
To Exit: From Bluetooth screen (Figure 4) touch button in the upper left hand corner.
Pairing Your Phone
Touch Open the Bluetooth function of your cell phone and enable the Bluetooth device search function.
“Pairing” will be displayed on the screen. After the connection succeeds, your cell phone will display (Rosen).
Connect to the device by entering the password (1234). The system will indicate “Linking” and then “Connected.” When your phone is connected its name will be displayed on the unit.
Touch (Figure 6.) if you desire the system’s Bluetooth feature to automatically detect your cell phone when the vehicle and system are turned on.
9
Figure 4.
Figure 5.
Figure 6.
Making/Ending A Call (Figure 7.)
You can dial the number from your cell phone or use the touch-screen shown at the right by entering the number, then press the icon to dial.
Press to clear.
Touch to transfer the call to your cell phone. Press again to transfer the call over speakers. Press to end the call.
Figure 7.
Answer A Call (Figure 8.)
For incoming calls, the system will automatically switch to the answer screen.
Press the icon to answer call or the lower to refuse the call
Touch to transfer call between cell phone and car speakers.
Figure 8.
Phonebook (Figure 9.)
Touch and the Phonebook will appear.
The phonebook can be used to view incoming numbers, received numbers and missed numbers.
The system will not display your cell phone’s internal phonebook but will show the last 5 numbers dialed, received or missed. Press the appropriate button on the screen to view the numbers.
10
Dialed Received Missed
Figure 9.
iPod
TM
Audio/Video
When the system is connected to an external iPod TM the iPod TM can be played through the system.
player, the audio and video files stored on
Note: Sleep mode should be enabled on the iPod TM to reduce the event of battery drain.
Enter (Figure 10.)
From the Main Menu, touch the icon to enter the iPod TM control system.
Figure 10.
Touch Button Descriptions (Figure 11.)
Pop up/hide the number pad
Repeat the current played song
Scan and play songs in the
current folder. The next song
will be played after the current
song has been finished for 10
seconds.
Play songs in the current folder
at random.
Return to upper menu
Previous track
Play/pause
Press once to display song information.
Press twice to display spectrum equalizers.
11
Figure 11.
Page up
Next track
Page down
Display playing information
Main Menu (Figure 12.)
Touch to enter category list. The system categorizes files into 6 options you can select as shown in screen shot.
Touch the desired category to select that section.
Play A Song (Figure 13.)
Touch the song shown on playlist to play.
Touch I to select previous song or
I to select next song.
Touch the arrow for page up or
for page down.
Touch the center of the control plate to display the play information on the screen or to access the Equalizer (EQ)
Figure 14.).
Play A Video (Figure 15.)
Touch to enter category list.
Touch 6. Video to switch to iPod TM operation.
From your iPod TM press Play for the video file desired. The file will be transferred to the system.
NOTE: Video function may not be supported
on all iPod models.
12
Figure 12.
Figure 13.
Figure 14.
Figure 15.
XM
TM
Satellite Radio
(optional)
Enter (Figure 16)
From the Main Menu, touch the icon to enter the XM Radio function.
Touch Button Descriptions (Figure 17)
Touch and to seek previous and next available stations.
Touch to select SAT1, SAT2,
SAT3 Channel Preset screens.
To select a station as a Preset, press and hold a PRESET bar.
The name of the station will appear in the bar when saved.
Play A Preset Channel (Figure 18)
Touch the desired Preset channel. The channel will load and begin to play.
NOTE: The background of the selected channel will become lighter.
13
Figure 16.
Figure 17.
Figure 18.
Rosen Navigation Information
Safety Information and Precautions
WARNING!
Please read and follow the following safety precautions.
Failure to follow the instructions below may increase your risk of collision and personal injury.
The Rosen Navigation software is not a substitute for your personal judgment. The route suggestions should never supersede any local traffic regulation or your personal judgment and /or knowledge of safe driving practices. Prior to completing any maneuvers suggested by your Rosen Navigation software (for example, a U-turn or a left turn), verify that you can legally and safely complete the maneuver. Do not follow route suggestions if they direct you to perform an unsafe or illegal maneuver, would place you in an unsafe situation, or would route you into an area that you consider unsafe.
Do not use the Rosen Navigation software to locate emergency services (such as police, fire stations, hospitals, and clinics).
The database may not include all emergency service providers. Use your own best judgment and ask for directions in these situations.
If the vehicle is in motion, only a passenger should program the Rosen Navigation software. The driver should not program the system unless the vehicle is parked in a safe location.
The Rosen Navigation software’s map database provides information on suggested routes without regard to factors that may affect your driving experience or the time required to arrive at your destination. For example, the system does not reflect road detours, closures or construction, some road characteristics (e.g., road surface, slope or grade, weight or height restrictions, etc.), temporary traffic congestion, weather conditions, and similar factors.
Vehicle Position
The Rosen Navigation software’s computer considers vehicle speed and heading changes, together with longitude and latitude information, to accurately determine vehicle heading and position on a digital map.
Map and Information Database
The map database used by your Rosen Navigation software was created using high-resolution aerial and land based data collection.
Car navigation maps are frequently updated. While the database was judged to be as accurate as possible at the time of its release, a map database can never be 100% accurate. Road information that is maintained in the map databases, such as turn restrictions or road names may change over time.
End-User License Agreement
Please refer to the Rosen Navigation User’s Manual to review and accept the terms and conditions in the End-User License before operating this product.
14
About the Registered Marks
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
iPod® is a registered trademark of Apple Computer, Inc.
NOTE: Features and specifications listed in this manual are subject to change without notice.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D Symbol are trademarks of Dolby Laboratories.
All rights reserved. Copyright 2009.
AM/FM
Touch
Screen
DP-GM0711 Rev A
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement