Samsung DVD-HD870 User's Manual

DVD Player
DVD-HD870
www.samsung.com
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long peroids of
time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
ENG-2
Precautions
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
This symbol indicates that
dangerous voltage consisting a risk
of electric shock is present within
this unit.
This symbol indicates that there are
important operating and
maintenance instructions in the
literature accompanying this unit.
Do not install this equipment in a confined space such as a bookcase or similar unit.
WARNING : To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain
Or Moisture.
Note to CATV system installer : This reminder is provided to call CATV system installer’s attention to
Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building as close to the point of cable entry as practical.
Caution : FCC regulations state that any unauthorized changes or modifications to this equipment may
void the user’s authority to operate it.
• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
• If this power supply is used at 240V ac, a suitable plug adapter should be used.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on.
The user is encouraged to try to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus meets all requirements of the Canadian Interference -Causing Equipment Regulations.
CALIFORNIA USA ONLY :
This Perchlorate warning applies only to primary CR (Maganese Dioxide) Lithium coin cells in the product sold
or distributed ONLY in California USA “Perchlorate Material - special handling may apply , See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
CLASS 1
LASER PRODUCT
KLASSE 1
LASER PRODUKT
LUOKAN 1
LASER LAITE
KLASS 1
LASER APPARAT
PRODUCTO LÁSER CLASE 1
ENG-3
CAUTION
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Note:
• This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.
• This DVD player is designed and manufactured to respond to the Region Management Information.
If the Region number of a DVD disc does not correspond to the Region number of this DVD player,
the DVD player cannot play the disc.
• The product unit accompanying this user manual is licensed under certain intellectual property rights
of certain third parties. In particular, this product is licensed under the following US patents:
5,060,220 5,457,669 5,561,649 5,705,762 5,987,417 6,043,912 6,222,983 6,272,096 6,377,524
6,377,531 6,385,587 6,389,570 6,408,408 6,466,532 6,473,736 6,477,501 6,480,829 6,556,520
6,556,521 6,556,522 6,578,163 6,594,208 6,631,110 6,658,588 6,674,697 6,674,957 6,687,455
6,697,307 6,707,985 6,721,243 6,721,493 6,728,474 6,741,535 6,744,713 6,744,972 6,765,853
6,765,853 6,771,890 6,771,891 6 775,465 6,778,755 6,788,629 6,788,630 6,795,637 6,810,201
6,862,256 6,868,054 6,894,963 6,937,552.
This license is limited to private non-commercial use by end-user consumers for licensed contents.
No rights are granted for commercial use. The license does not cover any product unit other than this
product unit and the license does not extend to any unlicensed product unit or process conforming to
ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit.
The license only covers the use of this product unit to encode and/or decode audio files conforming
to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product
features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
Handling Cautions
• Before connecting other components to this player, be sure to turn them all off.
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s
internal parts may be damaged.
• Do not put a flower vase filled with water or any small metal objects on the player.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
• Exterior interference such as lightning and static electricity can affect normal operation of this player.
If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the
AC power cord to the AC power outlet. The player will operate normally.
• Be sure to remove the disc and turn off the player after use.
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long
periods of time.
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.
• The main plug is used as a disconnect device and shall stay readily operable at any time.
Disc Storage
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
ENG-4
Before you start
Accessories
Remote
Batteries for
User’s Manual
Video/Audio
Control
Remote Control (AK68-01290X)
Cable
(AAA
Size)
(AC39-42001R)
(AK59-00054D)
(AC43-12002H)
Install Batteries in the Remote control
1
Open the battery
cover on the back of
the remote control.
2
Insert two AAA batteries.
Make sure that the
polarities (+ and -) are
aligned correctly.
3
Replace the battery
cover.
If the remote control doesn’t operate properly:
- Check the polarity + - of the batteries (Dry-Cell)
- Check if the batteries are drained.
- Check if remote control sensor is blocked by obstacles.
- Check if there is any fluorescent lighting nearby.
ENG-5
HDMI Cable
(MF39-00299A)
EP-2 Plug
Converter
(3721-000117)
TA B L E
OF
CONTENTS
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Chapter 1: Setup
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Tour of the Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Chapter 2: Connections
Choosing a Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Chapter 3: Basic Functions
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using the Search and Skip Functions . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using the Display Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using the Disc and Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Using the Function Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Slow Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Chapter 4: Advanced Functions
Adjusting the Aspect Ratio (EZ View). . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Selecting the Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Selecting the Subtitle Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Changing the Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Using the Instant Replay/Skip Function . . . . . . . . . . . . . . . . . . . . . . . . . 33
Using the Bookmark Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using the Zoom Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Clips Menu for MP3/WMA/JPEG/MPEG4/CD Audio . . . . . . . . . . . . . . . 37
Folder Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
MP3/WMA/CD Audio Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
MPEG4 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Picture CD Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Chapter 5: Changing Setup Menu
Using the Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Setting Up the Language Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Setting Up the Audio Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Setting Up the Display Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Setting Up the Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Chapter 6: Reference
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
ENG-6
Chapter 1
Setup
SETUP
General Features
Note
- Discs which cannot be played with this
player.
• DVD-ROM
• DVD-RAM
• CD-ROM
• CDV
• CDI
• CVD
• Super Audio CD(except CD layer)
• CDGs play audio only, not graphics.
- Ability to play back may depend on recording
conditions.
• DVD-R, +R
• CD-RW
• DVD+RW, -RW (V mode)
- The unit may not play certain CD-R, CD-RW
and DVD-R due to the disc type or recording
conditions.
Excellent Sound
Dolby Digital, a technology developed by Dolby
Laboratories, provides crystal clear sound
reproduction.
Screen
Both regular and widescreen(16:9) pictures can be
viewed.
Slow Motion
An important scene can be viewed in slow motion.
Parental Control (DVD)
The parental control allows users to set the level
necessary to prohibit children from viewing harmful
movies such as those with violence, adult subject
matter, etc.
Various On-Screen Menu Functions
You can select various languages (Audio/Subtitle)
and screen angles while enjoying movies.
COPY PROTECTION
Progressive Scan
Progressive scanning creates an improved picture
with double the scan lines of a conventional
interlaced picture.
EZ VIEW (DVD)
Easy View enables picture adjustment to match your
TV's screen size (16:9 or 4:3).
Digital Photo Viewer (JPEG)
You can view Digital Photos on your TV.
Repeat
You can repeat a song or movie simply by pressing
the REPEAT button.
MP3/WMA
This unit can play discs created from MP3/WMA files.
Instant Replay (DVD)
This function is used to replay the previous 10
seconds of a movie from the current position.
Instant Skip (DVD)
This function skips playback ahead 10 seconds.
HDMI (High Definition Multimedia
Interface)
HDMI reduces picture noise by allowing a pure
digital video/audio signal path from the player to
your TV.
Many DVD discs are encoded with copy
protection. Because of this, you should only connect
your DVD player directly to your TV, not to a VCR.
Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
This product incorporates copyright protection
technology that is protected by methods claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
PROGRESSIVE SCAN OUTPUTS
(480p, 720p)
“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE, IF PROGRESSIVE SCAN PICTURE
PROBLEMS OCCUR, IT IS RECOMMENDED THAT
THE USER SWITCH THE CONNECTION TO THE
‘STANDARD DEFINITION’ (VIDEO OR S-VIDEO)
OUTPUT. IF THERE ARE QUESTIONS REGARDING
YOUR TV SET COMPATIBILITY WITH THIS DVD
PLAYER, PLEASE CONTACT SAMSUNG'S
CUSTOMER SERVICE CENTER.”
ENG-7
SETUP
Disc Type and Characteristics
This DVD player is capable of playing the following types of discs with the corresponding logos:
Disc Types (Logos)
Recording Types
DVD
Audio
+
Video
VIDEO-CD
Audio
+
Video
AUDIO-CD
Disc Size
Max. Playing Time
5”
Single-sided 240 min.
Double-sided 480 min.
3 1/2”
Single-sided 80 min.
Double-sided 160 min.
5”
74 min.
3 1/2”
20 min.
5”
74 min.
3 1/2”
20 min.
Disc Markings
NTSC
DIGITAL
SOUND
- CD is recorded as a Digital Signal with
better audio quality, less distortion and
less deterioration of audio quality over
time.
Region Number
Play Region Number
NTSC broadcast system in U.S.A, Canada, Korea,
Japan, etc.
Dolby Digital disc
STEREO
- DVD contains excellent sound and
video due to Dolby Digital and
MPEG-2 system.
- Various screen and audio functions
can be easily selected through the
on-screen menu.
- Video with CD sound, VHS quality &
MPEG-1 compression technology.
Audio
~
Characteristics
Stereo disc
Digital Audio disc
Both the DVD player and the discs are
coded by region. These regional
codes must match in order for the disc
to play. If the codes do not match, the
disc will not play.
The Region Number for this player
is described on the rear panel of the
player.
DTS disc
DivX Certification
MP3 disc
DivX, DivX Certified,
You must only insert one DVD disc at a time.
Inserting two or more discs will not allow
playback and may cause damage to the DVD
player.
ENG-8
and associated logos are
trademarks of DivXNetworks, Inc and
are used under license
SETUP
Setup
Description
Front Panel Controls
9
1
2
4
3
5
6
10
7
8
1.
STANDBY/ON (
)
When STANDBY/ON is pressed on, the indicator goes out
and the player is turned on.
6.
VIDEO SEL.
Press to change Video output mode (S-Video, I-SCAN or
P-SCAN).
2.
STANDBY Indicator
When the unit is first plugged in, this indicator lights.
7.
STOP (
)
Stops disc play.
3.
DISC TRAY
Place the disc here.
8.
SKIP (
) / SEARCH
Use to forward skip a scene or music.
4.
OPEN/CLOSE (
)
Press to open and close the disc tray.
9.
SKIP (
) / SEARCH
Use to reverse skip a scene or music.
5.
DISPLAY
Operation indicators are displayed here.
10. PLAY/PAUSE (
)
Begin or pause disc play.
Front Panel Display
Total playing time/Displays various
messages concerning operations such
as PLAY, STOP, LOAD ...
NOdSC: No disc loaded.
OPEn: The disc tray is open.
LOAd: Player is loading disc information.
ENG-9
SETUP
Rear Panel
1
1
1.
2.
3.
2
3
4
DIGITAL AUDIO OUT JACKS
- Use either an optical or coaxial digital cable to connect
to a compatible Dolby Digital receiver.
- Use either an optical or coaxial digital cable to connect
to an A/V Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder.
COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide PR, PB and Y video.
- If P-SCAN is set ON in Video Output of the Setup
Menu, progressive scan mode will work.
- If I-SCAN is set ON in Video Output of the Setup
Menu, interlaced scan mode will work.
5
6
4.
VIDEO OUT JACK
- Use a video cable to connect to the Video input jack on
your television.
5.
S-VIDEO OUT JACK
- Use the S-Video cable to connect this jack to the
S-Video jack on your television for higher picture
quality.
6.
HDMI OUT JACK
- Use the HDMI cable to connect this jack to the HDMI
jack on your television for the best quality picture.
- If an HDMI cable is connected to an HDMI-compatible
TV, HDMI will be output automatically from the player a
maximum of 10 seconds later.
AUDIO OUT JACKS
Connect to the Audio input jacks of your television or
audio/video receiver
Note
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the
TV’s menu system.
- The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conversion
adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.
- If the DVD player is connected to a TV or display that is not compatible with Progressive Scan, an image
may not appear on your screen.
- Refer to the TV's instruction manual for detailed information regarding the TV’s HDMI input terminal.
- See pages 52 ~ 54 to get more information on how to use the setup menu.
ENG-10
SETUP
Setup
Tour of the Remote Control
1
4
5
6
7
8
DVD POWER Button
Turns the power on or off.
2.
NUMBER Buttons
3.
VIDEO SEL. Button
Changes Video output mode (S-Video, I-SCAN or PSCAN)
4.
SEARCH Buttons (
)
/
Allow you to search forward/backward through a disc.
5.
INSTANT REPLAY Button
This function is used to replay the previous 10 seconds
of a movie from the current position.
6.
SKIP Buttons (
)
/
Use to skip the title, chapter or track.
7.
STOP Button (
8.
MENU Button
Brings up the DVD player’s menu.
9.
ENTER/ /❷,➛/❿ Buttons
This button functions as a toggle switch.
14
15
2
3
1.
16
17
18
19
)
10. EZ VIEW Button
The aspect ratio of a picture can easily be adjusted
according to the screen size of your TV (16:9 or 4:3).
11. DISC MENU Button
Brings up the Disc menu.
9
12. SUBTITLE Button
10
20
11
21
13. AUDIO Button
Use this button to access various audio functions on a
disc.
12
13
22
14. ZOOM Button
Enlarges the DVD Picture
23
15. OPEN/CLOSE (
) Button
To open and close the disc tray.
16. STEP Button
Advances play one frame at a time.
17. INSTANT SKIP Button
This function skips playback ahead 10 seconds.
18. PLAY/PAUSE Button (
Begin/Pause disc play.
19. RETURN Button
Returns to a previous menu.
)
20. INFO Button
Displays the current disc mode.
21. CANCEL Button
Use to remove menus or status displays from the screen.
22. HDMI SEL. Button
HDMI resolution setup.
23. REPEAT Button
Allows you to repeat play a title, chapter, track, or disc.
ENG-11
Chapter 2
CONNECTIONS
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or disconnect any
cables.
- Refer to the user’s manual of the additional components (such as a TV) you are connecting for
more information on those particular components.
Connection to a TV (Video)
1
Using Video/Audio cables, connect the VIDEO (yellow)/AUDIO
(red and white) OUT terminals on the rear of the DVD player to
the VIDEO (yellow)/AUDIO (red and white) IN terminals of
your TV.
2
Turn on the DVD player and TV.
RED
WHITE
YELLOW
Audio Cable
Video Cable
3
RED
WHITE
YELLOW
Set the Video Output to S-Video in the Display Setup menu.
(See pages 52 to 54).
You can also use the VIDEO SEL. button to change the Video
Output mode. (See page 12)
4
Press the input selector on your TV remote control until the
Video signal from the DVD player appears on the TV screen.
Note
- Noise may be generated if the audio cable placed too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)
- The number and position of terminals may vary depending on your TV set. Please refer to the user's manual
of your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD
player.
- If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video
Output mode changes in the following sequence: (S-Video ➝ I-SCAN ➝ P-SCAN).
When HDMI is connected, only P-SCAN can be operated, S-Video and I-SCAN cannot be operated.
- If you set the HDMI output resolution to 720p or 1080i, the S-Video outputs will not output video.
ENG-12
CONNECTIONS
Connection to a TV (S-Video)
- Connecting to your TV using an S-Video cable.
1
Using an S-Video cable (not included), connect the S-VIDEO
OUT terminal on the rear of the DVD player to the
S-VIDEO IN terminal of your TV.
2
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
3
RED
Set the Video Output to S-Video in the Display Setup menu.
(See pages 52 to 54)
You can also use the VIDEO SEL. button to change the Video
Output mode. (See page 12)
WHITE
Audio Cable
RED
S-Video Cable
(not included)
WHITE
4
Press the input selector on your TV remote control until the SVideo signal from the DVD player appears on your TV screen.
Note
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)
- The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
- Please do not connect the S-Video and Component Video (Y, Pb, Pr) outputs simultaneously, as they may
interfere and degrade both video outputs quality.
- If you set the HDMI output resolution to 720p or 1080i, the S-Video output will not output video.
ENG-13
Connections
- You will enjoy high quality images. S-Video separates the picture element into black and white(Y)
and color(C) signals to present clearer images than regular video input mode. (Audio signals are
delivered through the audio output.)
CONNECTIONS
Connection to a TV (Interlace)
- Connecting to your TV using Component video cables.
- This is the best available connection if your TV is not capable of receiving a Progressive Scan
signal.
- You will enjoy high quality and accurate color reproduction images. Component video separates
the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean
images. (Audio signals are delivered through the audio output.)
1
Using Component video cables (not included), connect the
COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV.
2
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
RED
3
RED
Set the Video Output to I-SCAN in the Display Setup menu.
(See pages 52 to 54)
You can also use the VIDEO SEL. button to change the Video
Output mode. (See page 12)
BLUE
GREEN
WHITE
Audio Cable
RED
Component cable
(not included)
WHITE
RED
BLUE
GREEN
4
Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV
screen.
Note
- If Video output is incorrectly set to S-Video with the Component cables connected, the screen will
turn red.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)
- The component terminal of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y”
depending on the manufacturer. The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
- If you set the HDMI output resolution to 720p or 1080i, the S-Video output will not output video.
ENG-14
CONNECTIONS
Connection to a TV (Progressive)
- What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method.
Progressive scanning method provides better and clearer picture quality.
- If you set the HDMI output resolution to 720p or 1080i, the S-Video output will not output video.
Connections
1
Using Component video cables (not included), connect the
COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV.
2
3
RED
Set the Video Output to P-SCAN in the Display Setup menu.
(See pages 52 to 54)
You can also use the VIDEO SEL. button to change the Video
Output mode. (See page 12)
BLUE
RED
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
GREEN
WHITE
Audio Cable
RED
WHITE
RED
BLUE
GREEN
Component cable
(not included)
4
Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV
screen.
To see the progressive video output,
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s
menu system.
- Depending on your TV, the connection method may differ from the illustration above.
ENG-15
CONNECTIONS
Connecting to a TV with HDMI Jack
1
Using an HDMI-HDMI cable connect the HDMI OUT terminal on
the rear of the DVD player to the HDMI IN terminal of your TV.
2
Press the input selector on your TV remote control until the
HDMI signal from the DVD player appears on your TV screen.
HDMI cable
Connecting to a TV with DVI Jack
1
Using an HDMI-DVI cable (not included), connect the HDMI
OUT terminal on the rear of the DVD player to the DVI IN
terminal of your TV.
2
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO
(red and white) IN terminals of your TV.
Turn on the DVD player and TV.
RED
WHITE
Audio Cable
RED
WHITE
HDMI-DVI cable
(Not Included)
3
Press the input selector on your TV remote control until the DVI
signal from the DVD player appears on your TV screen.
HDMI VIDEO Specifications
When you press the HDMI SEL. button, the 480p, 720p, and 1080i resolutions are selected in order.
The first press of the HDMI SEL. button, brings up the current resolution.
The second press allows you to change the HDMI output resolution.
- Depending on your TV, certain HDMI output resolutions may not work.
- Please refer to the user's manual of your TV.
- If HDMI or HDMI-DVI cable is plugged into TV, the DVD player’s output is set to HDMI automatically about 10
seconds later.
- For better picture quality, set the HDMI output resolution to 720p or 1080i .
- If you set the HDMI output resolution to 720p or 1080i, the S-Video output will not output video.
ENG-16
CONNECTIONS
• HDMI (High Definition Multimedia Interface)
HDMI enables you to make a digital video and audio connection with a single cable.
Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV
having an HDMI input jack.
• HDMI connection description
- The player outputs a pure digital signal to the TV through an HDMI cable.
- If TV does not support HDCP (High-bandwidth Digital content protection), snow noise appears on the
screen.
• Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a DVD, the signal transmitted to
a TV is digital. Therefore either a digital-to-analog converter (in the DVD player) or an analog-to-digital
converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and
signal loss. DVI technology is superior because it requires no D/A conversion and is a pure digital signal
from the player to your TV.
• What is the HDCP?
HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via
DVI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector . etc). Content is encrypted at the source device to prevent unauthorized
copies from being made.
ENG-17
Connections
HDMI connector - Video and audio are transferred digitally without compression (LPCM or Bit Stream
data).
CONNECTIONS
Connection to an Audio System (2 Channel Amplifier)
1
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO,
COMPONENT or HDMI OUT terminals on the rear of the DVD
player to the VIDEO, S-VIDEO, COMPONENT or HDMI-DVI IN
terminal of your TV as described on pages 12 to 16.
3
RED
Turn on the DVD player, TV, and Amplifier.
WHITE
Audio Cable
RED
WHITE
2-Channel stereo amp
4
Press the input select button of the Amplifier to select external
input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier.(See pages 50 to 51)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
ENG-18
CONNECTIONS
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
Connections
If using an optical cable (not included), connect the DIGITAL
AUDIO OUT (OPTICAL) terminal on the rear of the DVD player
to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier.
If using a coaxial cable (not included), connect the DIGITAL
AUDIO OUT (COAXIAL) terminal on the rear of the DVD player
to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO,
COMPONENT or HDMI OUT terminals on the rear of the DVD
player to the VIDEO, S-VIDEO, COMPONENT or HDMI-DVI IN
terminals of your TV as described on pages 12 to 16.
or
Coaxial Cable
(not included)
Optical Cable
(not included)
3
Turn on the DVD player, TV, and Amplifier.
Dolby digital or
DTS amp
4
Press the input select button of the Amplifier to select external
input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- When you connect the DVD player to DTS Amplifier and play a DTS disc, set the DTS to On in Audio
Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 50 to 51)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
- Please remove the dust cover before using the optical cable (not included) and put the cover on the cable
again when it's not used.
ENG-19
Chapter 3
BASIC FUNCTIONS
Playing a Disc
Before Play
- Turn on your TV and set it to the correct Video Input your DVD player is connected to on the TV's
remote control.
- If you connected the DVD player to an external Audio System, turn on your Audio System and set
it to the correct Audio Input.
After plugging in the player, the first time you press the DVD POWER button, this
screen comes up: If you want to select a language, press a NUMBER button.
(This screen will only appear when you plug in the player for the first time.)
If the language for the startup screen is not set, the settings may change whenever you
turn the power on or off. Therefore, make sure that you select the language you want to
use.
Once you select a menu language, you can change it by pressing the
button on the
front panel of the unit for more than 5 seconds with no disc in the unit. Then the
SELECT MENU LANGUAGE window appears again where you can reset your
preferred language.
Playback
1
Press the OPEN/CLOSE
( ) button.
The STANDBY indicator
light goes out and the tray
opens.
2
Place a disc gently into the
tray with the disc’s label
facing up.
▼
3
RESUME function
When you stop disc play, the player remembers
where you stopped, so when you press
PLAY/PAUSE ( ) button again, it will pick up
where you left off.
Press the PLAY/PAUSE ( )
button or OPEN/CLOSE ( )
button to close the disc tray.
ENG-20
BASIC FUNCTIONS
4
Stopping Play
Press the STOP ( ) button
during play.
Note
- If the player is left in the stop mode for more than
one minute without any user interaction, a screen
saver will be activated. Press the PLAY/PAUSE
( ) button to resume normal play.
- If the player is left in the stop mode for more than
30 minutes, the power will automatically turn off.
(Automatic Power-Off Function)
5
Removing Disc
Press the OPEN/CLOSE
( ) button.
Pausing Play
Press the PLAY/PAUSE
( ) or STEP button on the
remote control during play.
Screen stops, no sound.
To resume, press the PLAY/PAUSE (
once again.
) button
Note
If the player is left for about 5 minutes in pause
mode, it will stop.
▼
Each time the button is pressed, a new frame
will appear.
No sound is heard during STEP mode.
Press the PLAY/PAUSE ( ) button to resume
normal play.
You can only perform step motion play in the
forward direction.
▼
No sound is heard during slow mode.
Press the PLAY/PAUSE ( ) button to resume
normal play.
7
Step Motion Play (Except
CD)
Press the STEP button on
the remote control during
play.
8
Slow Motion Play
Press the SEARCH ( / )
button to choose the play
speed between 1/8, 1/4 and
1/2 of normal during PAUSE
or STEP mode.
Note
This (
ENG-21
) icon indicates an invalid button press.
Basic Functions
▼
6
BASIC FUNCTIONS
Using the Search and Skip Functions
During play, you can search quickly through a chapter or track, and use the skip function to jump to
the next selection.
Searching through a Chapter or Track
▼
During play, press the
SEARCH ( or ) button
on the remote control for
more than 1 second.
If you want to search at a faster speed on the
DVD or CD, press and hold the button.
DVD
2X, 4X, 64X, 128X
VCD
4X, 8X
CD
2X, 4X, 8X
Note
- The speed marked in this function may be
different from the actual playback speed.
- No sound is hearing during search mode
(Except CD).
Skipping Tracks
During play, press the SKIP
(
or
) button.
- When playing a DVD, if you press the SKIP ( )
button, it moves to the next chapter. If you press
the SKIP ( ) button, it moves to the beginning
of the chapter. One more press makes it move
to the beginning of the previous chapter.
- When playing a VCD 2.0 in Menu Off mode, or a
VCD 1.1 or a CD, if you press the SKIP ( )
button, it moves to the next track. If you press
the SKIP ( ) button, it moves to the beginning
of the track. One more press makes it move to
the beginning of the previous track.
- If a track exceeds 15 minutes when playing a
VCD and you press the
button, it moves
forward 5minutes. If you press the
button, it
moves backward 5 minutes.
Note
When playing VCD2.0, this function works only
when the menu is off. Select Menu Off by pressing
the DISC MENU button.
ENG-22
BASIC FUNCTIONS
Using the Display Function
When Playing a DVD/VCD/MPEG4
▼
You can select Info in the function menu by
pressing the MENU button.
▼
When playing VCD2.0, this function works only
whenthe menu is off. Select Menu Off by
pressing the DISC MENU button.
▼
You may use the number buttons of the remote
control to directly access a title, chapter or to
start the playback from a desired time.
1
During play, press the
INFO button on the remote
control.
2
DVD
Title
001
Chapter 002
Time
Audio
Subtitle
00:00:13
ENG 5.1CH
Off
Enter
VCD
VCD
Track 001
Time 0 0 : 0 0 : 4 8
Enter
MPEG4
001
00:00:13
MP3 1/8
None
Enter
3
Press the ➛/❿ buttons to
make the desired setup and
then press the ENTER
button.
4
To make the screen
disappear, press the INFO
button again.
ENG-23
Basic Functions
Press the /❷ buttons to
select the desired item.
DVD
BASIC FUNCTIONS
Note
Title
Chapter
To access the desired title when there is more than one in the disc.
For example, if there is more than one movie on a DVD, each movie will be identified.
Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to
tracks on an audio CD).
Time
Allows playback of the film from a desired time. You must enter the starting time as a reference.
The time search function does not operate on some discs.
Audio
Refers to the film's soundtrack language. In the example, the soundtrack is played in English 5.1CH.
A DVD disc can have up to eight different soundtracks.
Subtitle
Refers to the subtitle languages available in the disc.
You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen.
A DVD disc can have up to 32 different subtitles.
Using the Disc and Title Menu
Using the Disc Menu
1
During the playback of a
DVD disc, press the MENU
button on the remote
control.
Note
- Depending on a disc, the Disc Menu may not
work.
- You can also select the Disc Menu, using the
DISC MENU button on the remote control.
- In VCD 2.0 the DISC MENU button is used to
select Menu On or Menu Off mode.
2
Press the /❷ buttons to
select Disc Menu, then
press the ❿ or ENTER
button.
Press ENTER key
for Disc Menu
Enter
Return
Menu
ENG-24
BASIC FUNCTIONS
Using the Title Menu
1
During the playback of a
DVD disc, press the MENU
button on the remote
control.
2
Press ENTER key
for Title Menu
Enter
Return
Menu
Note
- Depending on a disc, the Title Menu may not
work.
- Title Menu will only be displayed if there are at
least two titles in the disc.
Using the Function Menu
Using the Function Menu (DVD/VCD)
1
Press the MENU button
during playback.
2
Press the /❷ buttons to
select Function, then press
the ❿ or ENTER button.
- Info (See pages 23 to 24)
- Zoom (See page 36)
- Bookmark
(See pages 34 to 35)
- Repeat (See pages 26)
- EZ View
(See pages 28 to 29)
- Angle (See pages 32)
Zoom
Bookmark
Repeat
EZ View
Angle
Enter
Return
Menu
You can also directly select these functions
using their respective buttons on the remote
control.
- INFO
- EZ VIEW
- REPEAT
▼
3
Info
Press the /❷ buttons to
select one of the six
functions. Then press the
❿ or ENTER button to
access the function.
ENG-25
Basic Functions
Press the /❷ buttons to
select Title Menu, then
press the ❿ or ENTER
button.
BASIC FUNCTIONS
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
When playing a DVD/VCD
1
Press the REPEAT button
on the remote control.
Repeat screen appears.
▼
2
DVD
Press the ➛/❿ buttons to
select Chapter, Title or A-B,
then press the ENTER
button.
Off
01
01 A - B
T
ENTER REPEAT
DVD repeats play by chapter or title and VCD
repeat play by disc or track.
Chapter ( ): repeats the chapter that is
playing.
Title ( ): repeats the title that is playing.
Disc ( ): repeats the disc that is playing.
Track ( ): repeats the track that is playing.
A-B: repeats a segment of the disc that you
select.
T
VCD
Off
01
T
01 A - B
D
ENTER REPEAT
Using the A-B Repeat function
1. Press the REPEAT button on the remote control.
2. Press the ➛/❿ button to select A-B button in the on screen display.
3. Press the ENTER button at the point where you want repeat play to start (A).
B is automatically highlighted.
4. Press the ENTER button at the point where you want the repeat play to stop (B).
- To return to normal play, press the CANCEL button.
Note
A-B REPEAT does not allow you to set point (B) until at least 5 seconds of playback time has
elapsed after point (A) has been set.
3
DVD
To return to normal play,
press REPEAT button
again, then press the ➛/❿
buttons to select Off and
press ENTER button.
Off
01
T
01 A - B
ENTER REPEAT
VCD
Off
T
01
D
01 A - B
ENTER REPEAT
Note
- Depending on a disc, the Repeat function may
not work.
- When VCD 2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU button.
ENG-26
BASIC FUNCTIONS
Slow Play
This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments
being played etc., so you can study them more closely.
When playing a DVD
1
During play, press the
PLAY/PAUSE ( ) button.
Basic Functions
2
Press the SEARCH ( / )
button to choose the play
speed between 1/8, 1/4 and
1/2 of normal during PAUSE
or STEP mode.
ENG-27
Chapter 4
A D VA N C E D F U N C T I O N S
Adjusting the Aspect Ratio (EZ View)
To play back using aspect ratio (DVD)
▼
Press the EZ VIEW
button.
- The screen size
changes when the
button is pressed
repeatedly.
- The screen zoom mode
operates differently
depending on the screen
setting in the Display
Setup menu.
- To ensure correct
operation of the EZ
VIEW button, you should
set the correct aspect
ratio in the Display
Setup menu.
(See pages 52 to 54).
WIDE SCREEN
EZ VIEW
To make the aspect ratio bar disappear,
press the CANCEL button.
If you are using a 16:9 TV
For 4:3 aspect ratio discs
For 16:9 aspect ratio discs
- Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio.
The picture will look horizontally stretched.
- WIDE SCREEN
Displays the content of the DVD title in 16:9 aspect ratio.
- SCREEN FIT
The top and bottom portions of the screen are cut off. When
playing a 2.35:1 aspect ratio disc, the black bars at the top
and bottom of the screen will disappear. The picture will
look vertically stretched. (Depending on a type of disc, the
black bars may not disappear completely.)
- ZOOM FIT
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
- SCREEN FIT
The top and bottom portions of the screen are cut off and
the full screen appears.
The picture will look vertically stretched.
- ZOOM FIT
The top, bottom, left and right portions of the screen are cut
off and the central portion of the screen is enlarged.
- Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will
appear at the left and right of the screen in order to prevent
the picture from looking horizontally stretched.
ENG-28
A D VA N C E D F U N C T I O N S
If you are using a 4:3 TV
For 16:9 aspect ratio discs
For 4:3 aspect ratio discs
- 4:3 Letter Box
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the
screen.
- Normal Screen
Displays the content of the DVD title in 4:3 aspect ratio.
- 4:3 Pan&Scan
The left and right portions of the screen are cut off and the
central portion of the 16:9 screen is displayed.
- SCREEN FIT
The top and bottom portions of the screen are cut off and a
full screen appears.
The picture will look vertically stretched.
- SCREEN FIT
The top and bottom portions of the screen are cut off and
the full screen appears.
The picture will look vertically stretched.
- ZOOM FIT
The top, bottom, left and right portions of the screen are cut
off and the central portion of the screen is enlarged.
- ZOOM FIT
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
Note
This function may behave differently depending on the type of disc.
Advanced
Functions
ENG-29
A D VA N C E D F U N C T I O N S
Selecting the Audio Language
You can select a desired audio language quickly and easily with the AUDIO button.
Using the AUDIO button (DVD/VCD/MPEG4)
1
Press the AUDIO button.
The Audio changes when
the button is pressed
repeatedly.
- The audio languages
are represented by
abbreviations.
DVD
ENG DOLBY DIGITAL 5.1CH
When playing a VCD,
you can select among
Stereo, Right or Left.
VCD
Stereo
AUDIO
MPEG4
PCM 1/2
▼
Press AUDIO button at
remocon repeatedly to
select the desired Audio on
a MPEG4 then press the
ENTER button.
AUDIO
AUDIO
MPEG4 is a compressed video format
designed to deliver DVD quality video at
lower data rates and smaller file sizes.
Types of MPEG4 files are DivX or Xdiv. These
files have an .avi extension.
2
To remove the AUDIO
icon, press the CANCEL
or RETURN button.
Note
- This function depends on audio languages are
encoded on the disc and may not work.
- A DVD disc can contain up to 8 audio
languages.
- To have the same audio language come up
whenever you play a DVD; Refer to “Using the
Audio Language” on page 47.
ENG-30
A D VA N C E D F U N C T I O N S
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the SUBTITLE button (DVD/MPEG4)
1
Press the SUBTITLE
button.
The subtitle changes when
the button is pressed
repeatedly.
The subtitle languages are
represented by
abbreviations.
DVD
Off
External subtitle option
will appear, depends the
DivX Disc.
SUBTITLE
MPEG4
Subtitle Selection
External Subtitle Off
readme.TXT
Advanced
Functions
Non-standard fonts are not supported
Enter
Press SUBTITLE button at
remocon repeatedly to select
the desired subtitle language
on a MPEG4 then press the
ENTER button.
Return
Menu
MPEG4
Off
SUBTITLE
2
To remove the SUBTITLE
icon, press the CANCEL
or RETURN button.
Note
- Depending on the DVD you may have to select
the desired subtitle in the DVDs Disc Menu.
Press the DISC MENU button.
- This function depends on what subtitles are
encoded on the disc and may not work on all
DVDs.
- A DVD disc can contain up to 32 subtitle
languages.
- To have the same subtitle language come up
whenever you play a DVD;
Refer to “Using the Subtitle Language” on page
48.
ENG-31
A D VA N C E D F U N C T I O N S
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene, you can use the ANGLE
function.
Using the ANGLE function (DVD)
If the disc contains multiple angles, the ANGLE mark appears on the screen.
1
During play, press the
MENU button on the
remote control.
2
Press the /❷ buttons to
select Function , then
press the ❿ or ENTER
button.
Info
Zoom
Bookmark
Repeat
EZ View
Angle
Enter
3
Press the /❷ buttons to
select Angle , then press
the ❿ or ENTER button.
Return
Menu
Info
Zoom
Bookmark
Repeat
EZ View
Angle
Enter
4
Press the ➛/❿ buttons or
you can use the number
buttons on the remote
control to select the
desired angle.
4/6
Return
Menu
Note
- If the disc has only one angle, this feature won’t
work. Currently, very few discs have this feature.
- Depending on the disc, these functions may not
work.
ENG-32
A D VA N C E D F U N C T I O N S
Using the Instant Replay/Skip Function
Using the Instant Replay function (DVD)
If you miss a scene, you can see it again using this function.
Press the INSTANT
REPLAY button.
- The current scene
moves backward about
10 seconds, and plays
back.
Using the Instant Skip function (DVD)
Use this function to skip playback about 10 seconds ahead of the current scene.
Press the INSTANT SKIP
button.
- Playback will skip ahead
10 seconds.
ENG-33
Advanced
Functions
Note
Depending on the disc, these functions may not
work.
A D VA N C E D F U N C T I O N S
Using the Bookmark Function
This feature lets you bookmark sections of a DVD or VCD (Menu Off mode), so you can quickly find
them at a later time.
Using the Bookmark Function (DVD/VCD)
1
During play, press the
MENU button on the
remote control.
2
Press the /❷ buttons to
select Function, then
press the ❿ or ENTER
button.
Info
Zoom
Bookmark
Repeat
EZ View
Angle
Enter
Return
Menu
Return
Menu
3
Press the /❷ buttons to
select Bookmark, then
press the ❿ or ENTER
button.
Info
Zoom
Bookmark
Repeat
EZ View
Angle
Enter
4
When you reach the
scene you want to mark,
press the ENTER button.
Up to three scenes may
be marked at a time.
Note
- When VCD 2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU button.
CANCEL
- Depending on a disc, the Bookmark function may
not work.
ENG-34
A D VA N C E D F U N C T I O N S
Recalling a Marked Scene
1~3
The first 1~3 steps are the
same as those for “Using
the Bookmark Function”
on page 34.
4
CANCEL
Press the ➛/❿ buttons to
select a marked scene.
5
Press the PLAY/PAUSE
(
) button to skip to
the marked scene.
Advanced
Functions
Clearing a Bookmark
1~3
The first 1~3 steps are the
same as those for “Using
the Bookmark Function”
on page 34.
4
CANCEL
Press the ➛/❿ buttons to
select the bookmark
number you want to delete.
5
Press the CANCEL button
to delete a bookmark
number.
ENG-35
A D VA N C E D F U N C T I O N S
Using the Zoom Function
Using the Zoom Function (DVD/VCD)
1
During play, press the
MENU button on the
remote control.
2
Press the /❷ buttons to
select Function, then
press the ❿ or ENTER
button.
Info
Zoom
Bookmark
Repeat
EZ View
Angle
Enter
3
Press the /❷ buttons to
select Zoom, then press
the ❿ or ENTER
button.
Return
Menu
Return
Menu
Info
Zoom
Bookmark
Repeat
EZ View
Angle
Enter
▼
4
Press the /❷ or ➛/❿
buttons to select the part
of the screen you want to
zoom in on.
Press the ENTER button.
During DVD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
During VCD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
ENG-36
A D VA N C E D F U N C T I O N S
Clips Menu for MP3/WMA/JPEG/MPEG4/CD Audio
CD Audio or discs with MP3/WMA/JPEG/MPEG4 contain individual songs and/or pictures that
can be organized into folders as shown below. They are similar to how you use your computer to
put files into different folders.
Open the disc tray.
Place the disc on the tray.
Close the tray.
The tray closes and this
screen displays.
Stop
Off
00:00:00
WMA
JPEG
MP3
MPEG4
Enter
Menu
Return
: Name of currently playing file.
-
: MP3 file icon.
-
: Current Playback Time.
-
: WMA file icon.
-
: Current Playback Mode : There are four
modes. They can be selected in order by
pressing the REPEAT button.
- Off: Normal Playback
- Track: Repeats the current track.
- Folder: Repeats the current folder.
- Random: Files in the disc will be played
in random order.
-
: JPEG file icon.
-
: CD Audio file icon.
-
: Folder icon.
-
: Current Folder icon.
Advanced
Functions
-
Note
• When playing MP3, WMA, JPEG, Picture Quality (see page 54) cannot be set.
Folder Selection
The folder can be selected both in Stop or Play mode.
- To select the Parent Folder
Press the RETURN button to go to the parent folder,
or press the /❷ buttons to select “..” and
press ENTER to go to the parent folder.
Root
WMA
JPEG
- To select the Peer Folder
Press the /❷ buttons to select the desired folder,
then press ENTER.
Parent Folder
MP3
MUSIC
- To select the Sub-Folder
Press the /❷ buttons to select the desired folder,
then press ENTER.
Current Folder
1st
Sub-Folders
2nd
SONG FILE 1
Peer Folders
SONG FILE 2
SONG FILE 3
MPEG4 FILES
ENG-37
A D VA N C E D F U N C T I O N S
MP3/WMA/CD Audio Playback
Open the disc tray.
Place the disc on the tray.
Close the tray.
▼
1
Stop
Off
00:00:00
WMA
JPEG
MP3
MPEG4
Enter
Menu
Return
2
Press the /❷ buttons to
select a song file.
Press ENTER to begin
playback of the song file.
Play
Off
B e c a u s e Yo u
T
00:00:23
...
B e c a u s e Yo u
Cactus
Sad Dayu
Wonderful
Enter
Return
REPEAT
Repeat
Repeat/Random playback
1
Press the REPEAT button
to change the playback
mode. There are four
modes; Off, Track, Folder
and Random.
- Off: Normal Playback
- Track: Repeats the current song file.
- Folder: Repeats the song files which have the same extension
in the current folder.
- Random: Song files which have the same extension will be
played in random order.
To resume normal play, press the CANCEL button.
ENG-38
Only one kind of file is played back
when a disc or a folder contains both
MP3 and WMA files.
A D VA N C E D F U N C T I O N S
CD-R MP3/WMA file
When you record MP3 or WMA files on CD-R for playback
in this unit, please refer to the following.
- Your MP3 or WMA files should be ISO 9660 or JOLIET
format.
ISO 9660 format and Joliet MP3 or WMA files are
compatible with Microsoft's DOS and Windows, and with
Apple's Mac. This format is the most widely used.
- When naming your MP3 or WMA files, do not exceed 8
characters, and enter “.mp3, .wma” as the file
extension.
General name format : Title.mp3. or Title.wma. When
composing your title, make sure that you use 8 characters
or less, have no spaces in the name, and avoid the use of
special characters including: (.,/,\,=,+).
- Do not try recording copyright protected MP3 files.
Certain "secured" files are encrypted and code protected to
prevent illegal copying. These files are of the following
TM
types: Windows Media (registered trade mark of Microsoft
TM
Inc) and SDMI (registered trade mark of The SDMI
Foundation). You cannot copy such files.
- Important:
The above recommendations cannot be taken as a
guarantee that the DVD player will play MP3 recordings, or
as an assurance of sound quality. You should note that
certain technologies and methods for MP3 file recording on
CD-Rs prevent optimal playback of these files on your DVD
player (degraded sound quality and in some cases, inability
of the player to read the files).
- This unit can play a maximum of 500 files and 500 folders
per disc.
ENG-39
Advanced
Functions
- Use a decompression transfer rate of at least 128 Kbps
when recording MP3 files.
Sound quality with MP3 files basically depends on the rate
of compression/decompression you choose. Getting CD
audio sound requires an analog/digital sampling rate, that is
conversion to MP3 format, of at least 128 Kbps and up to
160 Kbps. However, choosing higher rates, like 192
Kbps or more, only rarely give better sound quality.
Conversely, files with decompression rates below 128 Kbps
will not be played properly.
- Use a decompression transfer rate of at least 64Kbps
when recording WMA files.
Sound quality with WMA files basically depends on the rate
of compression/decompression you choose.
Getting CD audio sound requires an analog/digital sampling
rate, that is conversion to WMA format, of at least 64Kbps
and up to 192Kbps.
Conversely, files with decompression rates below 64Kbps
or over 192Kbps will not be played properly.
Sampling rate that can be supported for WMA files is >30
Khz.
A D VA N C E D F U N C T I O N S
MPEG4 Playback
MPEG4 Play Function
MPEG4 is a compressed video format designed to deliver DVD quality video at lower data rates
and smaller file sizes. Types of MPEG4 files are DivX or Xdiv. These files have an .avi extension.
AVI files are used to contain the audio and video data. Only AVI format files with the “.avi”
extensions can be played.
1
Open the disc tray.
Place the disc on the tray.
Close the tray.
Off
Stop
00:00:00
WMA
JPEG
MP3
MPEG4
Enter
Menu
Return
2
Press the /❷ or ➛/❿
buttons to select an avi file
(DivX/XiviD) and then
press ENTER button.
Stop
Off
/MPEG4
T
00:00:00
...
a01_divx51b-8
a02_divx505b-8
a03_divx502sp-8
a04_divx412-8
Enter
Return
Menu
Repeat Playback
Press the REPEAT button to
change playback mode.
There are 3 modes, such as
Off, Folder, Title.
- Folder : repeats the AVI files which have the same extension
in the current folder.
- Title : repeats the title that is playing.
ENG-40
A D VA N C E D F U N C T I O N S
CD-R AVI file
MPEG4 Function Description
Function
Description
During play, press the
or
button, it moves forward
or backward 5 minutes.
During play, press the SEARCH
( or ) button and press
Search
again to search at a faster
(
or
) speed. Allows you to search
at a faster speed in an AVI
file. (2X, 4X, 8X)
Allows you to search at a
Slow Motion slower speed in an AVI file.
Play
(1/8X, 1/4X, 1/2X)
Each time the STEP button
Step Motion is pressed, a new frame will
Play
appear.
(
Skip
or
ZOOM
)
2X/4X/2X/Normal in order
Reference page
-
-
P 21
P 21
P 36
This unit can play the following video compression formats
within the AVI file format:
- DivX 3.11 contents
- DivX 4 contents (Based on MPEG-4 Simple Profile)
- DivX 5 contents (MPEG-4 simple profile plus additional
features such as bi-directional frames. Qpel and GMC are
also supported.)
- XviD MPEG-4 compliant Contents.
DVD-RW & DVD+R
Format that support for DivX file :
- Basic DivX format DivX3.11 / 4.12/ 5.x
- Xvid (MPEG-4 compliant video codec) and DivX Pro
- File format : *.avi, *.div, *.divx.
This unit supports all resolutions up to maximum below.
- Depending on MPEG4 file, these functions may not work.
DivX3.11 & DivX4 & XviD
DivX5
Bitrate may fluctuate:
Device may skip decoding
the high bitrate portions
and begin decoding again
when Bitrate returns to
normal.
720 x 480 @30fps
720 x 576 @25fps
: Maximum bitrate : 4Mbps
- MPEG4 files created not following the specifications above may not play back in this player.
Certain Codec Types, Versions (ex. MP4, AFS and other proprietary codecs) and higher resolutions over
specification are not supported.
- This unit supports CD-R/RWs written in MPEG4 in accordance with the “ISO9660 format”.
ENG-41
Advanced
Functions
Note
- The resolution that can be supported by DVD-HD870 model up to 720 x 480 @30 frames/ 720 x 576 @25
frames.
A D VA N C E D F U N C T I O N S
Picture CD Playback
Off
Stop
1
00:00:00
Select the desired folder.
(See page 37)
WMA
JPEG
MP3
MPEG4
Enter
2
Off
Stop
00:00:00
1
Press the /❷ buttons to
select a Picture file in the
clips menu and then press
the ENTER button.
Menu
Return
...
1
2
3
Enter
Return
3
Menu
Note
- Press the STOP button to return to the clips
menu.
ENTER RETURN
Press the INFO button to
display the menu.
Press the ➛/❿ buttons to
select the menu you want
to view, then press the
ENTER button.
- When playing a Kodak Picture CD, the unit
displays the Photo directly, not the clips menu.
Rotation
: Each time the ENTER button is pressed, the
picture rotates 90 degrees clockwise.
Zoom
•
: The pictures change automatically with about a 6
second interval.
•
: The pictures change automatically with
about a 12 second interval.
•
: The pictures change automatically with
about a 18 second interval.
❷ buttons to select the part of the screen
: Press the /❷
you want to zoom in on.
Press the ENTER button. Each time the ENTER
button is pressed, the picture is enlarged up
to 2X.
TIMER:
ENTER RETURN
Slide Show
•
: The unit enters slide show mode.
• Before beginning the Slide Show, the picture interval must be
set.
Note
- Depending on a file size, the amount of time between each picture may be different from the set interval
time.
- If you don’t press any button, the slide show will start automatically in about 10 seconds by default.
ENG-42
A D VA N C E D F U N C T I O N S
MP3-JPEG Playback
You can play JPEG photo file using music as a background.
1
Press the /❷ buttons to
select an MP3 file in the
clips menu and then
press the ENTER button.
▼
2
Music will play from the beginning.
Press the /❷ buttons to
select a JPEG file in the
clips menu and then
press the ENTER button.
Note
MP3 and JPEG files have to be on the same
3
Press STOP button when
you want to stop the
playback.
disc.
Advanced
Functions
CD-R JPEG Discs
- Only files with the “.jpg” and “.JPG” extensions can be played.
- If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
- Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
- The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special characters
(. / = +).
- Only a consecutively written multi-session disc can be played. If there is a blank segment in the multi-session disc, the disc can
be played only up to the blank segment.
- A maximum of 3000 images can be stored on a single CD.
- Kodak Picture CDs are recommended.
- When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
- Kodak Picture CD: The JPEG files in the pictures folder can be played automatically.
- Konica Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
- Fuji Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
- QSS Picture CD: The unit may not play QSS Picture CD.
- If the number of files in 1 Disc is over 500, only 500 JPEG files can be played.
- If the number of folders in 1 Disc is over 500, only JPEG files in 500 folders can be played.
ENG-43
Chapter 5
CHANGING SETUP
MENU
Using the Setup Menu
The Setup menu lets you customize your DVD player by allowing you to select various language
preferences, set up a parental level, even adjust the player to the type of television screen you
have.
1
With the unit in Stop
mode, press the MENU
button on the remote
control.
Press the /❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
❿
DivX(R)Registration
Enter
Return
Menu
❶ Language Setup : Setup of the Language.
❷ Audio Setup : Setup of the Audio Options.
❸ Display Setup :Setup of the Display Options. Use to select which type of screen you want to
watch and several display options.
❹ Parental Setup : Setup of the Parental Level. Allows users to set the level necessary to prevent
children from viewing unsuitable movies such as those with violence, adult
subject matter, etc.
❺ Divx(R) Registration : Please use the Registration code to register this player with the DivX(R)
Video On Demand format. To learn more go to www.divx.com/vod.
2
Press the /❷ buttons to
access the different
features. Press the ❿ or
ENTER button to access
the sub features.
3
To make the setup screen
disappear after setting up,
press the MENU button
again.
Note
Depending on the disc, some Setup menu
selections may not work.
ENG-44
CHANGING SETUP
MENU
Setting Up the Language Features
If you set the player menu, disc menu, audio and subtitle language in advance, they will come up
automatically every time you watch a movie.
Using the Player Menu Language
1
With the unit in Stop
mode, press the MENU
button.
2
Press the /❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R)Registration
❿
Enter
Return
Menu
3
Press the /❷ buttons to
select Language Setup,
then press the ❿ or
ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R)Registration
❿
Enter
4
Return
Menu
LANGUAGE SETUP
: English
Disc Menu
: English
Audio
: English
Subtitle
: Automatic
DivX Subtitle
: Unicode
Setup
Enter
Return
Menu
▼
5
LANGUAGE SETUP
Press the /❷ buttons to
select the desired
language, then press the
❿ or ENTER button.
Player
Player Menu
Menu
Disc Menu
Audio
Subtitle
DivX Subtitle
: English
√ English
Français
Deutsch
Español
Italiano
Nederlands
Setup
Enter
Return
Menu
ENG-45
- The language is selected and the screen
returns to Language Setup menu.
- To make the setup menu disappear, press the
MENU button.
Changing
Setup Menu
Press the /❷ buttons to
select Player Menu, then
press the ❿ or ENTER
button.
Player Menu
CHANGING SETUP
MENU
Using the Disc Menu Language
This function changes the text language only on the disc menu screens.
1
With the unit in Stop
mode, press the MENU
button.
2
Press the /❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
❿
DivX(R)Registration
Enter
Return
Menu
3
Press the /❷ buttons to
select Language Setup,
then press the ❿ or
ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R)Registration
❿
Enter
Return
4
Menu
LANGUAGE SETUP
Press the
/❷ buttons
to select Disc Menu, then
press the ❿ or ENTER
button.
Player Menu
: English
Disc Menu
: English
Audio
: English
Subtitle
: Automatic
DivX Subtitle
: Unicode
Setup
Enter
Return
Menu
▼
5
LANGUAGE SETUP
Press the /❷ buttons to
select the desired
language, then press the
❿ or ENTER button.
Player Menu
Disc Menu
Menu
Disc
Audio
Subtitle
Setup
DivX Subtitle
Enter
√ English
: English
Français
Deutsch
Español
Italiano
Nederlands
Return
Menu
ENG-46
- If the selected language is not recorded on
the disc, the original pre-recorded language is
selected.
- The language is selected and the screen
returns to Language Setup menu.
- To make the setup menu disappear, press the
MENU button.
CHANGING SETUP
MENU
Using the Audio Language
1
With the unit in Stop
mode, press the MENU
button.
2
Press the /❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R)Registration
❿
Enter
Return
Menu
3
Press the /❷ buttons to
select Language Setup,
then press the ❿ or
ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
❿
DivX(R)Registration
Enter
Return
4
Menu
LANGUAGE SETUP
Press the /❷ buttons to
select Audio, then press
the ❿ or ENTER button.
Player Menu
: English
Disc Menu
: English
Audio
: English
Subtitle
: Automatic
DivX Subtitle
: Unicode
Setup
Enter
Return
Menu
Press the /❷ buttons to
select the desired
language, then press the
❿ or ENTER button.
Player Menu
Disc Menu
Audio
Audio
Original
√ English
Français
: English
Deutsch
Subtitle
DivX Subtitle
Español
Italiano
Setup
Enter
Return
Menu
- Select “Original” if you want the default
soundtrack language to be the original
language the disc is recorded in.
- If the selected language is not recorded on
the disc, the original pre-recorded language is
selected.
- The language is selected and the screen
returns to Language Setup menu.
- To make the setup menu disappear, press the
MENU button.
ENG-47
Changing
Setup Menu
▼
5
LANGUAGE SETUP
CHANGING SETUP
MENU
Using the Subtitle Language
1
With the unit in Stop
mode, press the MENU
button.
2
Press the /❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
❿
DivX(R)Registration
Enter
Return
Menu
3
Press the /❷ buttons to
select Language Setup,
then press the ❿ or
ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
❿
DivX(R)Registration
Enter
Return
4
Menu
LANGUAGE SETUP
Press the /❷ buttons to
select Subtitle, then press
the ❿ or ENTER button.
Player Menu
: English
Disc Menu
: English
Audio
: English
Subtitle
: Automatic
DivX Subtitle
: Unicode
Setup
Enter
Return
Menu
▼
5
LANGUAGE SETUP
Press the /❷ buttons to
select the desired
language, then press the
❿ or ENTER button.
Player Menu
Disc Menu
Audio
Subtitle
DivX Subtitle
√ Automatic
English
Français
Deutsch
Español
: English
Italiano
Setup
Enter
Return
- Select “Automatic” if you want the subtitle
language to be the same as the language
selected as the audio language.
- Some discs may not contain the language you
select as your initial language; in that case the
disc will use its original
language setting.
Menu
- The language is selected and the screen
returns to setup menu.
- To make the setup menu disappear, press the
MENU button.
ENG-48
CHANGING SETUP
MENU
Using the DivX Subtitle Language
1
With the unit in Stop
mode, press the MENU
button.
2
Press the /❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
❿
DivX(R)Registration
Enter
Return
Menu
3
Press the /❷ buttons to
select Language Setup,
then press the ❿ or
ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
❿
DivX(R)Registration
Enter
Return
4
Menu
LANGUAGE SETUP
Press the /❷ buttons to
select DivX Subtitle, then
press the ❿ or ENTER
button.
Player Menu
: English
Disc Menu
: English
Audio
: English
Subtitle
: Automatic
DivX Subtitle
: Unicode
Setup
Enter
Return
Menu
Press the /❷ buttons to
select the desired
language, then press the
❿ or ENTER button.
Player Menu
: English
Disc Menu
- To make the setup menu disappear, press the
MENU button.
: English
Audio
√ Unicode
Subtitle
Cyrillic
DivX
Subtitle
Subtitle
Greek
: English
Setup
Enter
Return
- The language is selected and the screen
returns to setup menu.
Menu
ENG-49
Changing
Setup Menu
▼
LANGUAGE SETUP
5
CHANGING SETUP
MENU
Setting Up the Audio Options
Audio Options allows you to setup the audio device and sound status settings
depending on the audio system in use.
1
With the unit in Stop
mode, press the MENU
button.
2
Press the /❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
❿
DivX(R)Registration
Enter
Return
Menu
3
Press the /❷ buttons to
select Audio Setup, then
press the ❿ or ENTER
button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
❿
DivX(R)Registration
Enter
Return
Menu
▼
4
AUDIO SETUP
Press the /❷ buttons to
select the desired item,
then press the ❿ or
ENTER button.
Digital Out
: PCM
DTS
: Off
Dynamic Compression : On
PCM Down Sampling
: On
Setup
Enter
Return
Menu
ENG-50
To make the setup menu disappear, press the
MENU button.
CHANGING SETUP
MENU
❶ Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs Dolby Digital via digital output.
Select Bitstream when connecting to a Dolby Digital Decoder.
❷ DTS
Select On when connecting to DTS Decoder
- On : Outputs DTS Bitstream via digital output.
- Off : Doesn’t output digital signal.
Note
• There is no analog audio output when you play a DTS disc.
❸ Dynamic Compression
- On : To select dynamic compression. This is useful for watching movies late at night, as it
balances the load and quiet portions of a disc.
- Off : To select the standard range.
❹ PCM Down Sampling
- On : Select this when the Amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
- Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this case,
all signals will be output without any changes.
Note
Even when PCM Down sampling is Off, some discs will only output down-sampled audio through
the digital outputs.
Note
• To make the Setup menu disappear, press the MENU button.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
ENG-51
Changing
Setup Menu
HDMI
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS,
MPEG), you should set Digital Audio to PCM.
- If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM
Down sampling to On.
CHANGING SETUP
MENU
Setting Up the Display Options
Display options enable you to set various video functions of the player.
1
With the unit in Stop
mode, press the MENU
button.
2
Press the /❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R)Registration
❿
Enter
Return
Menu
3
Press the /❷ buttons to
select Display Setup,
then press the ❿ or
ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R)Registration
❿
Enter
Menu
TV Aspect
: Wide
Still Mode
: Auto
Screen Messages : On
Video Output
: S-Video
HDMI
❿
Picture Quality
❿
Setup
Enter
Return
Menu
ENG-52
▼
DISPLAY SETUP
4
Press the /❷ buttons to
select the desired item,
then press the ❿ or
ENTER button.
Return
To make the setup menu disappear, press the
MENU button.
CHANGING SETUP
MENU
❶ TV Aspect
Depending on a type of television you have,
you may want to adjust the screen setting
(aspect ratio).
- 4:3 Letter Box : Select when you want to
see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a
4:3 ratio screen. Black bars will appear at
the top and bottom of the screen.
- 4:3 Pan&Scan : Select this for conventional
size TVs when you want to see the central
portion of the 16:9 screen. (Extreme left and
right side of movie picture will be cut off.)
- 16:9 Wide : You can view the full 16:9
picture on your wide screen TV.
DISPLAY SETUP
Aspect
Ratio
TV Aspect
: 16:9 Wide
4:3 Letter Box
Still Mode
4:3 Pan&Scan
Screen Messag √ 16:9 Wide
Video Output
❿
HDMI
Setup
❿
Picture Quality
Enter
Return
• If the Yes/No selection in the Display Setup
sub Menu is not made within 10 seconds,
the screen returns to the previous menu.
❺ HDMI
This setting is used when the unit is
connected by HDMI to Display devices (TV,
Projector, etc.).
- Resolution Setting
The resolution setting is dependent on the
capability of your TV or Monitor.
- Auto : Auto resolution setting
- Manual : Manual resolution setting
- Resolutions
• 480p : 720 x 480
• 720p : 1280 x 720
• 1080i : 1920 x 1080
For best video performance, check your
TV’s user manual for proper resolution
setting.
- Format
Menu
You can use this function to set the HDMI
❷ Still Mode
These options will help prevent picture shake
in still mode and display small text clearer.
- Auto : When selecting Auto, Field/Frame
mode will be automatically ajusted.
- Field : Select this feature to minimize
screen shaking.
- Frame : Select this feature when you want
to read text more clearly on the screen .
output's Format.
- TV - RGB : Select this when you want to
connect to an RGB supported TV.
- Monitor : Select this when you want to
connect to a monitor.
- TV : Select this when you want to
❸ Screen Messages
Use to turn on-screen messages On or Off.
HDMI SETUP
Resolution Setting : Manual
❹ Video Output
Select Video Output.
- S-Video : Select when you want to use
Video and S-Video Out.
- I-SCAN : Select when you want to use
Video and Component 525i(Interlace) Out.
- P-SCAN : Select when you want to use
Component 525p(Progressive) Out or
HDMI.
• If you press the VIDEO SEL. button, Video
output mode is changed in regular
sequence in no disc mode.
(S-Video ➝ I-SCAN ➝ P-SCAN)
ENG-53
Resolution
: 720p
Format
: TV-RGB
Setup
Enter
Return
Menu
• If you press the VIDEO SEL. button, Video
output mode is changed in regular
sequence. The unit must be stopped, or
there must be no disc mode in the unit.
(S-Video ➝ I-SCAN ➝ P-SCAN)
Changing
Setup Menu
connect to a standard TV.
CHANGING SETUP
MENU
❻ Picture Quality
- Black Level : Adjusts the brightness of the
screen.(On or Off) It does not function in
Progressive mode.
- Brightness : Level 1 ~ Level 5
- Contrast : Level 1 ~ Level 5
- Color Saturation : Level 1 ~ Level 5
PICTURE QUALITY
Black Level
: Off
Brightness
: Level 3
Contrast
: Level 3
Color Saturation
: Level 3
Setup
Enter
Return
Menu
• Consult your TV User’s Manual to find
out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow
the TV User’s Manual regarding
Progressive Scan settings in the TV’s
menu system.
• If Video Output is set incorrectly, the
screen may be blocked.
• The resolutions available for HDMI output
depend on the connected TV or projector.
For details, see the user’s manual of your
TV or projector.
• When the resolution is changed during
playback, it may take a few seconds for a
normal image to appear.
• If you have HDMI connected, better
picture quality will be provided when the
output is set to 720p or 1080i.
ENG-54
CHANGING SETUP
MENU
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a rating,
which helps you control the types of DVDs that your family watches. There are up to 8 rating levels
on a disc.
Setting Up the Rating Level
1
With the unit in Stop
mode, press the MENU
button.
2
Press the /❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
❿
DivX(R)Registration
Enter
Return
Menu
3
Press the /❷ buttons to
select Parental Setup,
then press the ❿ or
ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
Enter
4
❿
DivX(R)Registration
Return
Menu
PARENTAL SETUP
Rating Level
Press the /❷ buttons to
select Rating Level, then
press the ❿ or ENTER
button.
: Kids Safe
Change Password
Setup
5
Return
Changing
Setup Menu
Enter
Menu
PARENTAL SETUP
Rating Level
Enter your password.
By default, password is
set to 0000.
: Kids Safe
Change Password
Enter Password
Setup
Enter
Return
Menu
▼
6
Press the /❷ buttons to
select the Rating Level
you want, then press the
❿ or ENTER button.
e.g) Setting up in Kids
Safe.
PARENTAL SETUP
Rating Level
Level
Rating
Change Passwor
: Kids Safe
√ Kids Safe
Level 2
Level 3
Level 4
Level 5
Level 6
Setup
Enter
Return
Menu
ENG-55
To make the setup menu disappear, press the
MENU button.
For example, if you select up to Level 6, discs
that contain Level 7, 8 will not play.
CHANGING SETUP
MENU
Changing the Password
1
With the unit in Stop
mode, press the MENU
button.
2
Press the /❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
❿
DivX(R)Registration
Enter
Return
Menu
3
Press the /❷ buttons to
select Parental Setup,
then press the ❿ or
ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
❿
DivX(R)Registration
Enter
Return
Menu
▼
4
Press the /❷ button to
select Change
Password, then press the
❿ or ENTER button.
Enter your new password.
Re-enter the new
password again.
PARENTAL SETUP
Rating Level
: Kids Safe
To make the setup menu disappear, press the
MENU button.
Change Password
Setup
Enter
Return
Menu
PARENTAL SETUP
Rating Level
: Kids Safe
Change Password
Enter Password
Setup
Enter
Return
Menu
PARENTAL SETUP
Rating Level
: Kids Safe
Change Password
Enter New Password
Setup
Enter
Return
Menu
ENG-56
Note
If you have forgotten your password, see
“Forgot Password” in the Troubleshooting Guide.
Chapter 6
REFERENCE
Troubleshooting
Before requesting service, please check the following.
Action
Problem
No operations can be
performed with the
remote control.
• Check the batteries in the remote control.
They may need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several minutes to
drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
5.1 channel sound is
not being reproduced.
• 5.1 channel sound is reproduced only when the following conditions are met. :
1) The DVD player is connected with the proper Amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “5.1 ch” mark on the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
Page
P5
P8
P19
P50~51
The
icon appears
on screen.
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
Disc Menu doesn’t appear.
• Check if the disc has a Menu.
Play mode differs from
the Setup Menu
selection.
• Some of the functions selected in the Setup Menu may not work properly if the
disc is not encoded with the corresponding function.
P44~46
The screen ratio
cannot be changed.
• The Screen Ratio is fixed on your DVDs.
P52~54
No audio.
• Make sure you have selected the correct Digital Output in the Audio Options
Menu.
P50~51
The screen is blocked
• Press the
button (on the front panel) for more than 5 seconds with no disc
inside. All settings will revert to the factory settings.
P20
Forgot password
• Press the
button (on the panel) for more than 5 seconds with no disc
inside. All settings including the password will revert to the factory settings.
Don't use this unless absolutely necessary.
P55
• Go to the contents and find the section of the instruction book that contains
the explanations regarding the current problem, and follow the procedure once
again.
• If the problem still cannot be solved, please contact your nearest Samsung
authorized service center.
The picture is noisy or
distorted
• Make sure that the disc is not dirty or scratched.
• Clean the disc.
ENG-57
P4
Reference
If you experience other
problems.
REFERENCE
Problem
No HDMI output.
Action
Page
• Check the if the Video output is set to HDMI.
• Check the connection between the TV and the HDMI jack of DVD player.
• See if the TV supports this 480p/720p/1080i DVD player.
P16~17
Abnormal HDMI output
screen.
• If snow noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
P16~17
HDMI output Jitter
• Check your TV system setup correctly.
• Screen Jitter may occur when frame rate is converted from 50Hz to 60Hz for
720P/1080i HDMI (High Definition Multimedia Interface) Output.
• Please refer to the user’s manual of your TV.
ENG-58
P52~54
REFERENCE
Specifications
General
Power Requirements
AC 110-240 V ~ 60/50 Hz
Power Consumption
9W
Weight
Dimensions
Operating Temperature Range
Operating Humidity Range
DVD
(DIGITAL VERSATILE DISC)
Disc
+41°F to +95°F
10 % to 75 %
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
CD : 3 1/2”
(COMPACT DISC)
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
Component Video
S-Video
HDMI
2 Channel
Audio
Output
17.2” (W) X 18” (D) X 1.8” (H)
CD : 5”
(COMPACT DISC)
Composite Video
Video
Output
1.042 lbs 0.065 oz
*Frequency Response
1 channel : 1.0 Vp-p (75 Ω load)
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.3 Vp-p (75 Ω load)
480p, 720p, 1080i
L(1/L), R(2/R)
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
*S/N Ratio
110 dB
*Dynamic Range
100 dB
*Total Harmonic Distortion
0.004 %
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications with
out notice.
- Weight and dimensions are approximate.
Reference
ENG-59
MEMO
MEMO
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre.
Region
North America
Country
CANADA
MEXICO
U.S.A
ARGENTINE
BRAZIL
Latin America
CHILE
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
COLOMBIA
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
Europe
CIS
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
Republic of Ireland
Switzerland
RUSSIA
KAZAHSTAN
UZBEKISTAN
UKRAINE
LITHUANIA
LATVIA
ESTONIA
AUSTRALIA
CHINA
HONG KONG
INDIA
Asia Pacific
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
SOUTH AFRICA
Middle East & Africa
U.A.E
Customer Care Center
1-800-SAMSUNG (7267864)
01-800-SAMSUNG (7267864)
1-800-SAMSUNG (7267864)
0800-333-3733
0800-124-421
4004-0000
800-726-7864 (SAMSUNG)
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-7267-864
0-800-100-5303
01-8000112112
02 201 2418
844 000 844
Distributor pro Českou republiku :
Samsung Zrt., česka organizační složka
Vyskočilova 4, 14000 Praha 4
38 322 887
09 693 79 554
3260 SAMSUNG or
08 25 08 65 65 (€ 0,15/Min)
01805 - 121213 (€ 0,14/Min)
06-80-SAMSUNG (7267864)
800-SAMSUNG (7267864)
0032 (0)2 201 24 18
0900 20 200 88 (€ 0,10/Min)
231 627 22
0 801 801 881
80 8 200 128
0800-SAMSUNG (726786)
902 10 11 30
08 585 367 87
0870 SAMSUNG (7267864)
0818 717 100
0800-7267864
8-800-200-0400
8-800-080-1188
8-800-120-0400
8-800-502-0000
8-800-77777
800-7267
800-7267
1300 362 603
800-810-5858, 010-6475 1880
3698 - 4698
3030 8282
1800 110011
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
1800-29-3232
02-689-3232
0800-329-999
1 800 588 889
0860 7267864 (SAMSUNG)
800SAMSUNG (7267864)
8000-4726
Web Site
www.samsung.com/ca
www.samsung.com/mx
www.samsung.com
www.samsung.com/ar
www.samsung.com/br
www.samsung.com/cl
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com.co
www.samsung.com/be
www.samsung.com/cz
www.samsung.com/dk
www.samsung.com/fi
www.samsung.com/fr
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsung.lu
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/uk
www.samsung.com/uk
www.samsung.com/ch
www.samsung.ru
www.samsung.kz
www.samsung.uz
www.samsung.com/ur
www.samsung.lt
www.samsung.com/lv/index.htm
www.samsung.ee
www.samsung.com/au
www.samsung.com.cn
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/th
www.samsung.com/tw
www.samsung.com/vn
www.samsung.com/za
www.samsung.com/mea
Warranty
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against
manufacturing defects in materials and workmanship for the following limited warranty period:
One (1) Year Parts / Ninety days (90) Labor
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the
United States, and does not include transportation, installation, removal or reinstallation. Warranty repairs must be
performed by SAMSUNG’s authorized service center. To receive warranty service, the original dated bill of sale must be
presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center. Transportation
to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if found
to be defective during the limited warranty period specified above. The product must be returned during the warranty
period with transportation charges prepaid to SAMSUNG’s designated service center. Prior to returning any product for
warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. SAMSUNG does not warrant uninterrupted or error-free operation of the product. All replaced parts and products become
the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the
remaining original warranty, or ninety (90) days, whichever is longer.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of this product and shall not apply to the following, including, but not limited to: damage which occurs in
shipment; applications and uses for which this product was not intended; failures or problems which are caused by
products or equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect, misapplication, fire, water, lightning or other acts of nature; incorrect electrical line voltage, fluctuations or surges; damage caused by improper or
faulty installation; improper connection with any peripheral; product alteration or modification; improper or unauthorized repair; cosmetic damage or exterior finish; product with altered serial numbers; failure to follow operating
instructions, customer adjustments, maintenance and environmental instructions that are covered and prescribed in
the instruction book; use of non-SAMSUNG or unauthorized parts, supplies, accessories or equipment which damage
this product or result in service problems; failures or problems due to incompatibility with other equipment.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
☎1-800-SAMSUNG (7267864)/www.samsung.com
Samsung Electronics America,Inc.
105 Challenger Road
Ridgefield Park,NJ 07660-0511
1-800-SAMSUNG (7267864)
www.samsung.com
US
AK68-01290X