quick start guide
2 remote control functions
5.1CH Digital
Home Theater System
HT-Z210
1 disc playback
2 remote control functions
3 connecting the speakers
4 connecting the video out to your tv
5 connecting audio from external components
6 listening to radio
1
2
DVD RECEIVER
DVD
PORT
3
18
1
19
20
21
2
3
4
1 disc playback
1. Press the OPEN/CLOSE (
5
6
7
22
REMAIN
STEP
PAUSE
2. Load a disc.
• Place a disc gently into the tray with the disc’s label facing up.
25
8
26
27
9
Press to turn the Home Theater or your
Samsung TV On/Off.
5
6
7
AUDIO
SUB
TITLE
30
The picture moves forward one frame
each time the button is pressed during
playback.
22
23
24
STOP button
Fast backward or forward
through a song/scene.
TUNING/CH button
Cursor/ENTER button
Used to select or move up/down, left/
right when setting the menu function.
29
SUBTITLE button
30
EXIT button
Press to exit the setup screen.
ZOOM button
14
P.BASS button
15
SLEEP button
Press to memorize radio frequencies.
Press to select SD or HD mode.
Enlarges the picture during disc playback.
Provides more powerful bass.
16
Selects three different slow motion
playback speeds.
MO/ST button
You can listen to radio broadcasts in
MONO or STEREO.
17
Samsung Electronics America, Inc.
1-800-SAMSUNG (7267864)
www.samsung.com/us
PL II EFFECT button
Adjusts the Dolby Pro Logic II audio
effect.
DVD button
Press to select the DVD mode.
18
31
Press to set the sleep off time.
SLOW button
TUNER button
Press to listen to radio broadcasting.
AUX button
Center Speaker
SEARCH buttons
28
TUNER MEMORY, SD/HD button
32
33
34
35
36
Press to select the channel or to tune in
radio broadcasting.
Front Speaker (L)
Front Speaker (L)
Rear Speaker (L)
Rear Speaker (R)
Press to mute the sound.
Press to return to the previous menu.
Selects the disc subtitle language.
Subwoofer
INFO button
View or change disc playback information
on screen.
SOUND EDIT button
Adjust the speaker sound settings and
level.
REPEAT button
Repeat playback of a chapter, title, group
or track.
 Do not let children play with or near the speakers. They could get hurt if a speaker falls.
 When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
 Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien
substances into the duct (hole) of the subwoofer speaker.
DSP/EQ button
Digital Signal Processor/Equalizer functions in STEREO mode.
 Do not hang the subwoofer on a wall through the duct (hole).
LOGO button
You can make your own TV wallpaper
(screen saver).
DIMMER button
M
If you place a speaker near your TV set, screen color may be distorted because of the magnetic field generated by
the speaker. If this occurs, place the speaker away from your TV set.
The front display brightness will be
adjusted.
Press to select external audio input.
1 - English
Code No. AH68-02070U (0.0)
2 - English
Red
AUX IN 2
Press to stop.
RETURN button
PL II MODE button
Black
Press to play.
27
Allows you to select six different Dolby
Pro Logic II audio modes.
• Make sure the colors of the speaker terminals match the colors of the connecting
plugs.
Press to pause.
AUDIO button
11
3. Connect the connecting plugs to the back of the Home Theater.
PAUSE button
10
Selects the Disc’s Audio language.
2. Insert the black wire into the black terminal (–) and the red wire into the red (+) terminal,
and then release the tab.
Used to cancel a wrong entry.
MUTE button
Press to see the menu.
1. Press down the terminal tab on the back of the speaker.
CANCEL button
26
13
36
Press TV/VIDEO button to select the Video
input on your TV.
MENU button
34
17
TV/VIDEO button
9
12
35
OPEN/CLOSE button
25
Press + to raise the volume and – to
lower it.
32
33
15
16
USB port selection
VOLUME button
8
12
P.BASS
PORT button
PLAY button
Tune in radio broadcasting, skip the
song/scene.
11
14
21
Tuning Preset/CD Skip buttons
31
13
If you have any questions or comments relating to Samsung products, please contact
the SAMSUNG customer care center.
POWER button
REMAIN button
You can check the elapsed or
remaining time on a disc.
29
Thank you for purchasing this Samsung 5.1CH Digital Home Theater System.
We have manufactured this product to provide you with many hours of Audio/Video
Entertainment. This “QUICK START GUIDE” guide has been included to get
you up and running in the least amount of time as possible.
20
You can operate your Samsung TV with the
remote control.
Number (0~9) buttons
28
10
TV button
4
23
24
)
You can operate your DVD receiver with the
remote control.
19
STEP button
) button to open the disc tray.
3. Close the compartment by pressing the OPEN/CLOSE (
button again.
• Playback starts automatically.
DVD RECEIVER button
3 connecting the speakers
3 - English
4 connecting the video out to your tv
5 connecting audio from external components
6 listening to radio
Choose one of the three methods for connecting to a TV.
AUX1 : Connecting an External Component/MP3 player
Connecting the FM Antenna
Components such as an MP3 Player.
1. Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
1. Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the
external component/MP3 player.
2. Press the AUX button on the remote control to select AUX1 input.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞USB ➞ FM.
AUX IN 2
AUX IN 2
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid
surface.
AUX IN 1
Audio Cable (not supplied)
Audio OUT
AUX IN 2
METHOD3
(supplied)
METHOD2
METHOD1
AUX2 : Connecting an External Analog Component
FM Antenna(supplied)
Analog signal components such as a VCR.
1. Connect AUX IN 2 (Audio) on the Home Theater
to the Audio Out of the external analog
component.
• Be sure to match connector colors.
AUX IN 2
AUX IN 2
METHOD 1 : HDMI
Connect the HDMI cable from the HDMI OUT jack on the back of the DVD Home Theater to the HDMI IN jack on your TV.
2. Press the AUX button on the remote control to
select AUX 2 input.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows :
M
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞USB ➞ FM.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a component video cable(not supplied) from the Component Video
Output (Pr, Pb and Y) Connectors on the back of the main unit to the Component Video Input Connectors on your TV.
Listening to Radio
Remote Control
METHOD 3 : Composite Video
Connect the supplied video cable from the VIDEO OUT jack on the back of the main unit to the VIDEO IN jack on your TV.
M
M
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR
to this product.
OPTICAL : Connecting an External Digital Component
Resolutions available for the HDMI output are 480p, 720p,1080i/1080p.
 This product operates in Interlace scan mode (480i) for Component Output.
 After making the video connection, set the Video input source on your TV to match the corresponding Video
output (HDMI, Component or Composite) on your Home theater.
See your TV owner's manual for more information on how to select the TV's Video Input source.
 If you use an HDMI cable to connect a Samsung TV to the main unit, you can operate the Home Theater using
the TV's remote control. (This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC).)
 Please check the
This unit does not receive AM broadcasts.
Audio Cable (not supplied)
If the external analog
component has only one
Audio Out, connect either
left or right.
logo (If your TV has an
logo, then it supports Anynet+ function.)
1. Press the TUNER button to select the FM band.
2. Tune in to the desired station.
• Automatic Tuning 1 : When the #,$ button is pressed, a preset broadcast station is selected.
• Automatic Tuning 2 : Press and hold the ,,. button to automatically search for active broadcasting stations.
• Manual Tuning : Briefly press the ,,. button to increase or decrease the frequency incrementally.
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Main Unit
1. Connect the Digital Input (OPTICAL) on the
Home Theater to the Digital Output of the
external digital component.
1. Press the FUNCTION button to select the FM band.
AUX IN 2
2. Press the AUX button on the remote control to
select DIGITAL IN.
• You can also use the FUNCTION button on the
main unit.
The mode switches as follows :
AUX IN 2
Optical Cable(not supplied)
2. Select a broadcast station.
• Automatic Tuning 1 : Press the STOP (¦) button to select PRESET and then press the #,$ button to select the
preset station.
• Automatic Tuning 2 : Press the STOP (¦) button to select MANUAL and then press and hold the #,$ button to
automatically search the band.
• Manual Tuning : Press the STOP (¦) button to select MANUAL and then briefly press the
button to tune in to
a lower or higher frequency.
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞USB ➞
FM.
4 - English
5 - English
6 - English