Samsung UN32J4000AFXZA User's Manual

The On Screen Menus
LED TV
user manual
Figures and illustrations in this User Manual are provided for reference
only and may differ from actual product appearance. Product design and
specifications may be changed without notice.
IMPORTANT WARRANTY INFORMATION
REGARDING TELEVISION FORMAT VIEWING
✎✎ See the warranty card for more information on warranty
terms.
Be careful about the television formats you select and the length of time you
view them. Uneven LED aging as a result of format selection and use, as well as
burned in images, are not covered by your Samsung limited warranty.
✎✎ In Canada: 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files) or still
image elements (such as TV channel logos, TV shows or movies
in panorama or 4:3 format, stock or news scroll bars, etc.) on the
screen. The constant display of still pictures can cause ghosting or
image burn-in (image retention) on the LED screen, which will affect
image quality. To reduce the risk of this effect, please follow the
recommendations below:
•Avoid displaying the same TV channel for long periods.
•Always try to display any image in full screen mode. Use the TV's
Picture Options menu to select the optimal screen size.
•Reduce brightness and contrast values to the minimum required
to achieve the desired picture quality. Values that exceed the
minimum may speed up the burn-in process.
•Frequently use all TV features designed to reduce image retention
and screen burn-in. Refer to proper user manual section for details.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED
WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations
of the original Limited Warranty supplied with Samsung Electronics
(SAMSUNG) products, and the requirements, conditions, exclusions
and limitations contained herein, SAMSUNG will additionally
provide Warranty Repair Service in the United States on SAMSUNG
products purchased in Canada, and in Canada on SAMSUNG
products purchased in the United States, for the warranty period
originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a
SAMSUNG Authorized Service Center. Along with this Statement,
the Original Limited Warranty Statement and a dated Bill of Sale
as Proof of Purchase must be presented to the Service Center.
Country
Address
Customer Care
Center 
Web Site
CANADA
Samsung Electronics Canada
Inc. 2050 Derry Road West,
Mississauga, Ontario L5N
0B9 Canada
U.S.A
Samsung Electronics America,
Inc. 85 Challenger Road
Ridgefield Park, NJ 07660
1-800-SAMSUNG (726-7864)
www.samsung.com/ca/
support (English)
www.samsung.com/ca_fr/
support (French)
www.samsung.com/us/
support
changes to the Color Tone, Size and HDMI Black Level.
Your TV has two kinds of menus, the Main menu and the various
■■Color Tone (Cool / Standard / Warm): Cool makes the picture
Tools menus. The Main menu gives you access to most or all of
bluer (cooler). Warm makes the picture redder (warmer).
the menu options available on your TV. The Tools menus display
✎✎ Warm is deactivated when the picture mode is set to
a selected number of frequently used menu options that change
Dynamic.
depending on the screen you are viewing. A Tools menu symbol
(T) in the lower right side of the screen indicates that a Tools menu ■■Size: Set the size and aspect ratio of the picture on the screen.
Your cable box or satellite receiver may have its own set of
is available.
screen sizes as well. However, we highly recommend you use
The Main menu has seven primary categories:
the TVs 16:9 mode most of the time.
16:9: Sets the picture to the 16:9 wide screen format.
yy Picture
yy Input
Zoom1: Provides moderate magnification of the picture. Sides,
top, and bottom are cut off.
yy Sound
yy Application
Zoom2: Provides larger magnification of the picture. Sides, top,
yy Channel
yy Support
and bottom are cut off.
Wide Fit: Enlarges the aspect ratio of the picture so the picture
yy Setup
fits the entire screen.
4:3: Sets the picture to the old, 4:3 format and puts black or gray
To view the Main menu, press the MENU button on your remote. To
borders on the right and left of the picture.
view a Tools menu, press the TOOLS button on your remote.
✎✎ Do not watch your TV in the 4:3 format for a long time.
✎✎ The menu options that appear in the Main menu depend
Traces of borders displayed on the left, right and center of
the screen may cause image retention (screen burn) which
on the Source you have selected. For example, if you have
is not covered by the warranty.
selected the HDMI source, the Channel category will not
Screen Fit: Displays the full image without any cut-off when
appear. To see the Channel category, you must first select TV
your
TV is inputting HDMI (720p / 1080i / 1080p) or Component
in the Source List.
(1080i / 1080p) HD signals.
The Menu options are presented below, arranged by Main menu
✎✎ HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p
categories. A Tools button symbol (t) next to an option
(1920x1080) or 720p (1280x720) resolution.
name indicates the option is also available in one of the Tools
✎✎ You can adjust and store settings for each external device you
menus.
have connected to an input on the TV. Picture Sizes available
by Input Source are listed below:
Picture Menu
Mode t
Select your preferred picture mode.
Input Source
✎✎ When your TV is connected to a PC, you can only select
ATV, AV, Component (480i, 480p)
Entertain and Standard.
■■Timer Viewing: You can schedule a channel to be displayed
automatically at a set time, even when you are watching another
channel. You must set the current time first in the Time > Clock
function to use Timer Viewing.
To schedule a channel, follow these steps:
1. Select a channel in the Added Channels list using the ▲/▼
buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Timer Viewing in the Tools menu, and then press the
ENTERE button. The Timer Viewing screen appears.
Programmed List (on the Channel List Screen)
Programmed List Screen Tools Menu t
■■Change Info: Change the scheduling information for a show or
channel you have scheduled.
To change the information, follow these steps:
1. Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTERE button.
Channel
Repeat
6-1
Once
2. On the Programmed List screen, select the show or channel
entry you want to change, and then press the TOOLS button.
The Tools Menu appears.
▲
▼
01-01-2015
L MoveU Adjust
■■Standard: Selects the normal sound mode.
■■Music: Emphasizes music over voices.
■■Movie: Provides the best sound for movies.
■■Clear Voice: Emphasizes voices over other sounds.
TV’s speakers are turned off. You will hear sound through the
external speakers only. When you set Speaker Select to TV
Speaker both the TV’s speakers and the external speakers
are on. You will hear sound through both.
Available in Standard sound mode only.
✎✎ When Speaker Select is set to External Speaker, the
■■Balance L/R: Adjusts the balance between the right and left
speaker.
■■100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth
Adjustment): Adjusts the loudness of specific bandwidth
frequencies.
■■Reset: Resets the equalizer to its default settings.
VOLUME and MUTE buttons will not operate and the sound
settings will be limited.
✎✎ If there is no video signal, both the TV’s speakers and the
3. Select Change Info, and then press the ENTERE button.
The Timer Viewing screen appears.
Start Time
12 : 01 am
E Enter
4. Use the ◄/► buttons to move from entry field to entry field
and the ▲/▼ buttons to change the entries. Where numbers
are displayed, you can also enter numbers directly using the
number keypad on your remote.
R Return
4. Use the ◄/► buttons to move from entry field to entry field
and the ▲/▼ buttons to change the entries. Where numbers
are displayed, you can also enter numbers directly using the
number keypad on your remote.
✎✎ If you select Everyday or Every Week, the date you
select in the Date field becomes the start date for your
scheduled viewing. For Everyday, the TV will turn on
every day, at the time you selected, starting from that
date. For Every Week, the TV will turn on every week,
on the same day of the week as the start date you
selected, at the time you selected, from that day on. If
you select Once, the TV will turn on once, on the date
and time you selected.
5. Press the ENTERE button when done.
■■Cancel Schedules: Cancel a show or channel you have
scheduled.
To cancel a scheduled show or channel, follow these steps:
1. Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTERE button.
2. On the Programmed List screen, select the show or channel
entry you want to cancel, and then press the TOOLS button.
The Tools Menu appears.
5. Press the ENTERE button on your remote when done.
✎✎ Only Added Channels can be scheduled.
✎✎ Scheduled programs and channels are displayed in the
Programmed List.
✎✎ When you select a digital channel, press the ► button to
The Clock Set screen appears. Use the ▲/▼ buttons to
change the values in each field or use the number buttons to
enter the values directly. Use the ◄/► buttons to move from
field to field. When done with all the fields, press ENTERE.
Channel Mode (Added Channels/Favorite
Channels)
Lets you select the channel list displayed when you press the
<CH> (Channel) button on your remote. For example, if you
select Favorite Channels, you will only see Favorite channels when
you press the <CH> button.
✎✎ Available only when Clock Mode is set to Manual.
■■Sleep Timer t
Automatically shuts off the TV after a preset period of time. (30,
60, 90, 120, 150 and 180 minutes).
Fine Tune
Analog channels only.
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store
operation. If the signal is weak or distorted, fine tune the channel
manually.
✎✎To reset fine-tuning, select the channel, select Fine Tune, and
then select Reset on the Fine Tune screen.
Setup Menu
Plug & Play
Lets you re-run the Plug & Play initial setup procedure. For
instructions, see your Quick Start Guide.
Language
Adds verbal description to the main audio to help the visually
impaired.
Dolby Digital Comp
Set Dolby Digital compression mode.
Sound Reset
■■Reset All: Resets all sound settings to the factory defaults.
Preferred Language
Digital channels only.
Digital-TV broadcasts can transmit many audio tracks
simultaneously (for example, simultaneous translations of a program
into foreign languages).
✎✎ You can only select a language from among the ones being
broadcast.
Multi-Track Sound (MTS)
Analog channels only.
■■Mono: Select for channels that are broadcasting in mono or if
you are having difficulty receiving a stereo signal.
■■Stereo: Select for channels that are broadcasting in stereo.
■■SAP: Select to listen to the Separate Audio Program, which is
usually a foreign-language translation.
✎✎ Depending on the program being broadcast, you can listen to
Mono, Stereo or SAP.
Channel Menu
❑❑ Memorizing Channels
When you first set up your TV using Plug & Play, the TV
memorized the channels that were available over the air or through
your cable system and added them to the Channel List. The
Antenna and Auto Program functions described below let you
re-run the channel memorization function without having to re-run
the Plug & Play procedure.
Antenna (Air / Cable)
Before your television can memorize the available channels, you
must select your TV's signal source, Air (using an antenna) or
Cable. Select Menu > Channel > Antenna > Air or Cable. After
you have selected the signal source, go on to the Auto Program
function.
determines the signal source the TV is tuned to. For example,
if you receive your TV signal over the air, and you select
Cable, you will see only snow. You must select Air to see a
picture.
Automatically adjusts the volume level when you change video
sources or content so the level remains the same.
SPDIF Output
The SPDIF (Sony Philips Digital InterFace) outputs an
uncompressed digital audio signal when you connect the digital
audio jack on the back of the TV to a digital audio in jack on a
receiver or home theater.
Auto Program
■■Audio Format: You can select the Digital Audio output (SPDIF)
format. The available Digital Audio output (SPDIF) format may
differ depending on the input source.
■■Audio Delay: Lets you correct timing mismatches between the
audio track and the video when you are watching the TV and
listening to digital audio output from the TV through an external
device such as an AV receiver. When you select Audio Delay, a
slider appears. Use the left and right arrow buttons to adjust the
slider. Press ENTERE when done (0ms ~ 250ms).
To start Auto Program, follow these steps:
The Auto Program function memorizes all channels that are
available over the air or through your cable system and adds them
to the Channel List.
1. Push MENUm → Channel → Auto Program → ENTERE
on your remote. The Antenna Source screen appears.
2. On the Antenna Source screen, select the source of your TV signal.
3. Select Cancel Schedules, and then press the ENTERE
button. The Cancel Schedule screen appears.
✎✎ Choose between English, Español, and Français.
- Antenna: Displays the current antenna source, Air or Cable.
4. Select OK, and then press the ENTERE button.
❑❑ Setting the Time
view the digital program list. If you highlight a program in
2. On the Programmed List screen, select the show or channel
the list, and then press the ENTERE(Schedule) button,
entry you want information for, and then press the TOOLS
you set Timer Viewing for that program directly.
button. The Tools Menu appears.
■■Channel Name Edit: Analog channels only. Lets you assign a
3. Select Information, and then press the ENTERE button.
name of up to five characters to an analog channel. For example,
The Timer Viewing Information screen appears.
Hist, Food, Golf, etc. This makes it easier to find and select a
channel .
4. Select Change Info and press the ENTERE button to
■■Select All: Select all the channels in the displayed channel list.
change information, or select Close and press the ENTERE
button to close the Information screen.
■■Deselect All: Deselect all the selected displayed channels.
✎✎ You can only select Deselect All when one or more
■■Select All / Deselect All: You can select or deselect all channels
channels are selected.
in the channel list.
■■Auto Program: See Auto Program under Memorizing Channels.
- Channel: If you have selected TV, select the desired channel.
- Music/Photo: If you have selected USB, follow these steps to
select a folder containing MP3 (Music) or JPEG (Photo) files on
the USB device:
✎✎ The maximum displayed number of files, including sub
folders, in one folder of USB storage device is 2000.
✎✎ The media may not be playing smoothly when using the
device lower than USB 2.0.
1. Use the ◄/► buttons to move to the field under Music
or the field under Photo, and then press the ENTERE
button. The TV displays a single folder (the Root folder)
and the type or name of the device.
button.
■■Clock: Set the clock so you can use the various timer features
of the TV.
✎✎ If you disconnect the power cord, you have to set the
clock again.
To set the clock, follow these steps:
1. Select Setup >Time > Clock.
2. Press the ENTERE button. A list of folders on the device
appears.
2. Press ENTERE and select Auto or Manual, and then press
ENTERE again.
✎✎ If there are no folders on your device, press the
If you selected Auto:
Yellow select button to select the Root folder, and
then press the RETURN button. The Timer screen
re-appears.
The TV will automatically download the correct time from a
digital channel.
• Select Time Zone, and then press the ENTERE button.
Use the▲/▼ buttons to select your Time Zone, and then
press ENTERE.
3. Use the ▲/▼ buttons to highlight a folder that contains
music or photos, and then press the Yellow select button
to select the folder.
• Select DST (Daylight Savings Time), and then press
ENTERE. Select On if you want to turn the DST
adjustment on and off manually. Select Off to turn off the
DST adjustment. Select Auto if you want the TV to adjust
to DST automatically. Press ENTERE when done.
4. Press the RETURN button. The Timer screen re-appears.
■■Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual. If you select Manual, you can select the
days you want to activate the timer by using the ◄/► buttons
to highlight the day, and then pressing the ENTERE button.
To unselect a day, highlight it, and then press the ENTERE
button.
When you finished making all your selections on the Timer screen,
press either the ENTERE or RETURN button.
✎✎ DST and Time Zone function are only available when
the Clock Mode is set to Auto.
-5-
[J4000-ZA]BN68-07180A-01ENG.indb 1
-6-
on your cable system.
✎✎ Memorized channels are added to the Added Channels
list. These are the channels you will see when you use the
Channel buttons on your remote.
A program currently being broadcast.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Delete in the Tools menu, and then press the ENTERE
button.
To add channels to the Added Channels list, follow these steps:
1. Select one or more channels in the All Channels list using the
▲/▼ buttons and the Yellow Select button on your remote.
❑❑ Managing Channels
2. Press the TOOLS button on your remote. The Tools menu
appears.
Channel List
3. Select Add in the Tools menu, and then press the ENTERE
button.
See your list of Added channels, Favorite channels, or channels
you've scheduled for viewing. Add or delete Favorite channels, add
or delete channels from the Added Channels list, schedule channels
or programs for viewing. Watch a channel by selecting the channel
in the All Channels, Added Channels, or Favorite screen, pressing
the ▲ / ▼ buttons, and then pressing the ENTERE button.
Air (
1. Select one or more channels in the Added Channels list using
the ▲/▼ buttons and the Yellow Select button on your remote.
Channel.
A reserved program.
To delete channels from the Added Channels list, follow these steps:
✎✎ This function is only available in Cable mode.
♥ TV #7
A Favorite channel.
■■Add / Delete: Delete a channel from or add a channel to the
Added Channels list.
✎✎ Press the ENTERE button to stop the Clear Scrambled
7-1 *
)
The Channel List Tools menu contains most of the functions you
can use on the All Channels, Added Channels, and Favorite List
screens. To view, select a list screen, select a channel, and then
press the TOOLS button.
This function filters out scrambled channels after Auto Program is
completed. This process may take up to 20~30 minutes.
Air
♥ TV #6
A selected channel.
❑❑ The Channel List Tools Menu t
Clear Scrambled Channel
6
6-1 Meaning
c
✎✎ All deleted channels will be shown on the All Channels list.
You add channels back to the Added Channels list on the
All Channels list.
✎✎ A gray-colored channel indicates the channel has been
deleted from the Added Channels list.
✎✎ The Add menu option only appears for deleted channels.
■■Add to Favorite/Delete from Favorite: Lets you add channels to
and delete channels from your Favorites list.
8
Air
9
Air
9-1
♥ TV #9
10
Air
10-1
♥ TV #10
11-1
♥ TV #11
' Zoom ' Select T Tools ► Next Program
To add channels to the Favorites list, follow these steps:
1. Select one or more channels in the All Channels list using the
▲/▼ buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
Channel List Screens icons are listed on the left side.
Select an icon using the ▲/▼ buttons to view each list.
3. Select Add to Favorite in the Tools menu, and then press the
ENTERE button.
■■ All Channels: Shows all currently available channels including
those you deleted from the Added Channels list.
■■ Added Channels: Shows all Added Channels. These are the
channels that appear when you press the CH button.
■■* Favorite: Shows all favorite channels.
■■ Programmed: Shows all channels and programs currently
scheduled using Timer Viewing.
To delete channels from the Favorites list, follow these steps:
1. Select one or more channels in the Favorite Channels list using
the ▲/▼ buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Delete from Favorite in the Tools menu, and then press
the ENTERE button.
✎✎ Remote control buttons active on the Channel List screen.
xxGreen (Zoom): Enlarges or shrinks a channel number.
xxYellow (Select): Move the cursor to a channel. Press the Yellow
button to select the channel. A c mark appears. Repeat to select
additional channels. Then, open the Tools menu and apply a
function to the channels you selected.
xxT (Tools): Displays the Channel List Tools menu. (The Tools
menus may differ depending on the situation.)
Game Mode (On/Off)
When you connect a game console such as a PlayStation™
or Xbox™ to your TV, you can enjoy a more realistic gaming
experience by turning on the Game Mode function.
■■Change PIN: The Change PIN screen will appear. Choose any
4 digits for your PIN and enter them in Enter New PIN fields.
Re-enter the same 4 digits in Confirm New PIN fields. When the
Change PIN screen disappears, press the OK button. The TV
has memorized your new PIN.
✎✎ If you forget the PIN, press the remote-control buttons in
the following sequence, which resets the pin to “0-0-0-0” :
POWER (off) → MUTE → 8 → 2 → 4 → POWER (on)
✎✎ Precautions and limitations for game mode:
xxBefore you disconnect the game console and connect another
external device, set Game Mode to Off in the setup menu.
xxIf you display the TV menu in Game Mode, the screen shakes
slightly.
TV.
Caption
You may notice slightly reduced picture quality.
(On-Screen Text Dialogue)
Program Rating Lock
■■Caption: You can switch the caption function on or off. If
captions are not available, they will not be displayed on the
screen.
The Program Rating Lock feature lets you block programs
you've determined are inappropriate for your children based on
the program's ratings. To access the Program Rating Lock
feature and make any changes, you must enter a PIN (personal
identification number). To watch a blocked program, you must also
enter the same PIN.
✎✎ The Caption feature does not work in Component or
HDMI mode.
■■Caption Mode: You can select the desired caption mode.
✎✎ Program Rating Lock is not available in HDMI or
Component mode.
✎✎ The default PIN number of a new TV set is “0-0-0-0”. You can
set your own PIN using the Change PIN function.
How It Works
Default / CC1~CC4 / Text1~Text4: (analog channels only) The
Analog Caption function operates in either analog TV channel
mode or when a signal is supplied from an external device to the
TV. (Depending on the broadcasting signal, the Analog Caption
function may or may not work with digital channels.)
Default / Service1~Service6 / CC1~CC4 / Text1~Text4:
(Digital channels only) The Digital Captions function works with
When you access the Program Rating Lock Menu functions for
digital channels.
the first time, the PIN input screen appears. Enter 0-0-0-0. The PIN
✎✎ Service1~6 may not be available in digital caption mode
screen closes and the Program Rating Lock Menu appears. Every
depending on the broadcast.
time you access the Program Rating Lock functions, the PIN
screen will appear and you must enter a PIN.
■■Digital Caption Options: (Digital channels only)
Size: Options include Default, Small, Standard and Large. The
When the Rating Lock screen appears, select Program Rating
default is Standard.
Lock, and then press ENTERE. Select On, and then press the
ENTERE key again. Depending on what type of programs or
Font Style: Options include Default and Styles 0 to 7. The
movies you want to block, select one of the options on the screen,
default is Style 0.
and then press the ENTERE button. The options are listed below:
Foreground Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. You can change the
■■TV Parental Guidelines: You can block TV programs based
color of the letters. The default is White.
on their ratings. This function allows you to control what your
Background Color: Options include Default, White, Black, Red,
children are watching.
Green, Blue, Yellow, Magenta and Cyan. You can change the
■■MPAA Rating: You can block movies based on their MPAA
background color of the captions. The default is Black.
ratings. The Motion Picture Association of America (MPAA) has
Foreground Opacity: This adjusts the opacity of text. Options
implemented a rating system that provides parents or guardians
include Default, Transparent, Translucent, Solid and Flashing.
with advanced information on which films are appropriate for
children.
Background Opacity: This adjusts the opacity of the caption
background. Options include Default, Transparent, Translucent,
■■Canadian English: You can block TV programs based on their
Solid and Flashing.
Anglophone Canadian ratings.
Return to Default: This option sets each Size, Font Style,
■■Canadian French: You can block TV programs based on their
Foreground Color, Background Color, Foreground Opacity and
French Canadian ratings.
Background Opacity to its default.
■■Downloadable U.S. Rating: Parental restriction information can
✎✎ Digital Caption Options are available only when you can
be used while watching DTV channels.
select Default and Service1 ~ Service6 in Caption Mode.
Locking/Blocking Programs or Movies
✎✎ The Foreground and Background cannot be set to the
You lock or block programs and/or movies in essentially the same
same color.
way for each option. Each option displays a grid or table. All the
Boot Logo
tables have ratings listed on the left. The TV Parental Guidelines
option also has kinds of content listed across the top: All: Lock all
Enable/disable displaying the logo while the TV starts up.
TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation
/ L: Adult Language / D: Sexually Suggestive Dialog.
-7-
POWER
P
-4-
To lock/block movies or shows with certain ratings and/or kinds of
content, click the square next to the rating and/or under the kind of
content. A lock appears. To unlock/unblock, click the square again.
When you click a low rating, all the ratings above it will also display
locks. You can also Allow All or Lock All. When done, press the
RETURN button on your remote.
❑❑ Other Features
✎✎ After connecting the game console, set Game Mode to On.
- TV/USB: Select TV or USB. The USB device must be
connected to your TV before you can select USB.
Time
✎✎ The time you set will appear when you press the INFO
✎✎ Channel memorization can take up to 45 minutes, depending
✎✎ Selecting the signal source using the Antenna function also
Auto Volume
Turns the TV on and off automatically at times and days you
select. You can set three different on/off timer settings.
Set the menu language.
■■Information: Display the information for a show or channel you
have scheduled. You can also change the schedule Information.
1. Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTERE button.
3. On the Cable Type screen, use the ◄/►/▲/▼ buttons to select
the type of digital and analog cable systems you have: STD, HRC,
or IRC. Most systems are STD (Standard). When done, select
Start, and then press ENTERE. The TV will start memorizing
channels.
(digital channels only)
DTS TruSurround is a patented DTS technology that solves
the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling, virtual surround
sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all
multichannel formats.
✎✎ Game Mode is not available when the input source is set to
■■On Time / Off Time: Set the hour, minute, am/pm, and
Activate/Inactivate fields for the On Time and Off Time. Use the
◄/► buttons to move from field to field. Use the ▲/▼ buttons
to change the values in each field. To activate the timer with
the setting you have chosen, set the Activate/Inactivate field to
Activate.
■■Volume: Set the desired loudness.
■■Contents: To select what will be turned on when the timer
setting is activated. You can set the TV to turn on a specific
channel or play back contents such as photo or audio files.
Use the ◄/► buttons to move to move to the Contents field,
and then press the ENTERE button. The Contents screen
appears. Use the ◄/► buttons to move from field to field. Use
the ▲/▼ buttons to change the values in each field.
an asterisk “*” on the right-hand side of the channel number
in the channel banner.
If you choose Auto, and then press ENTERE, the TV will
automatically select the correct Antenna source. Go to Step 3.
Visual Impaired
Available in Standard sound mode only.
✎✎ To cancel the Sleep Timer, select Off.
Timer 1 / Timer 2 / Timer 3
✎✎ You must set the clock first.
✎✎ Select the channel, and then select Fine Tune.
✎✎ Fine tuned channels that have been saved are marked with
Auto
-3-
If you selected Manual:
❑❑ Other Channel Menu Functions
If your TV is connected to a cable outlet, choose Cable, and then
press ENTERE. Go to Step 3.
external speakers will be mute.
DTS TruSurround (On/Off)
Icons
Cable
✎✎ When you set Speaker Select to External Speaker, the
Equalizer
-2-
The Programmed list displays the channels and programs you
have scheduled for viewing using the Timer Viewing function. You
can view, modify, or delete a show you have scheduled using the
functions on the Programmed List screen Tools menu.
Timer Viewing
Date
16:9, Zoom1, Zoom2,
4:3
16:9, Wide Fit, 4:3,
Screen Fit
■■Digital Clean View (Off / Low / Medium / High / Auto) : If the
broadcast signal received by your TV is weak, you can activate
the Digital Clean View feature to reduce any static and ghosting
that may appear on the screen.
✎✎ When the signal is weak, try all the Digital Clean View
options until the TV displays the best picture.
Backlight / Contrast / Brightness / Sharpness /
■■HDMI Black Level (Normal / Low) : For HDMI signals, select
Color / Tint (G/R)
the black level to adjust the screen depth. Low make blacks look
■■Backlight: Adjusts the brightness of the screen by adjusting the
darker.
brightness of the individual pixels.
✎✎ Available only in HDMI mode (RGB signals).
■■Contrast: Increases or decreases the contrast between dark and ■■Film Mode (Off / Auto1 / Auto2) : Sets the TV to automatically
light areas of the picture.
sense and process film signals from all sources and adjusts the
■■Brightness: Adjusts the brightness of the screen. Not as
picture for optimum quality.
effective as Backlight.
✎✎ Available in ATV, DTV (interlace), AV, COMPONENT (480i /
■■Sharpness: Sharpens or dulls the edges of objects.
1080i) and HDMI (480i / 1080i).
■■Color: Adjusts the color saturation. The higher the Color setting, ■■Motion Lighting (Off / On): When on, the TV automatically
the more intense the color. Low settings remove color and the
adjusts the brightness of the screen in response to the
picture becomes black, white and gray.
brightness of the room. In bright light, the screen brightens. In
dim light, the screen dims.
■■Tint (G/R): Adjusts the amount of green and red in the picture.
As you increase the amount of green, the amount of red
Picture
Reset
decreases and vice versa.
■■Picture Reset (Reset Picture Mode/Cancel): Resets the
✎✎ When the TV is connected to a PC, you can only make
picture settings to their factory defaults.
changes to Backlight, Contrast, Brightness, and
Sharpness.
-1-
DTV Air
DTV (1080i, 1080p), Component (1080i,
1080p), HDMI (720p, 1080i, 1080p)
■■Dynamic: Brightens the screen. Suitable for a bright room.
■■Standard: Suitable for a normal.
■■Movie: Darkens the screen, making it less glary. Suitable for
watching movies in a darkened room.
■■Entertain: Sharpens the picture. Suitable for games.
✎✎ Only available when the TV is connected to a PC.
Picture Size
Mode t
Display Icons Used in the Channel List Screens
Air
If your TV is connected to an antenna choose Air, and then press
ENTERE. The TV will automatically start memorizing channels.
If you are listening to the sound track of a broadcast or movie
through an external receiver, you may hear a sound echo caused
by the difference in decoding speed between the TV’s speakers
and the speakers attached to your audio receiver. If this occurs, set
the TV to External Speaker.
© 2015 Samsung Electronics Co., Ltd. All rights reserved.
BN68-07180A-01
Antenna
Custom: Magnifies or shrinks 16:9 pictures vertically and/or
horizontally. A magnified or shrunk picture can be moved left,
right, up, and down.
Speaker Select
Sound Menu
Added Channels
Wide screen format LED Displays (with 16:9 aspect ratios, the
ratio of the screen width to height) are primarily designed to view
wide screen format full-motion video. The images displayed on
them should primarily be in the wide screen, 16:9 ratio format, or
expanded to fill the screen, if your model offers this feature, with
the images constantly in motion. Displaying stationary graphics and
images on the screen, such as the dark sidebars on non-expanded
standard format television video and programming, should be limited
to no more than 5% of the total television viewing time per week.
Additionally, viewing other stationary images and text such as stock
market crawls, video game displays, station logos, web sites or
computer graphics and patterns, should be limited as described
above for all televisions.
Displaying stationary images that exceed the above guidelines
can cause uneven aging of LED Displays that leave subtle, but
permanent burned-in ghost images in the LED picture. To avoid
this, vary the programming and images, and primarily display full
screen moving images, not stationary patterns or dark bars. On LED
models that offer picture sizing features, use these controls to view
different formats as a full screen picture.
Transportation to and from the Service Center of TVs 37" or smaller
is the responsibility of the purchaser. Conditions covered are limited
only to manufacturing defects in material or workmanship, and only
those encountered in normal use of the product.
Exclusions include, but are not limited to, any originally specified
provisions for in-home or on-site services, minimum or maximum
repair times, exchanges or replacements, accessories, options,
upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please
call toll-free:
✎✎ In the United States: 1-800-SAMSUNG (1-800-726-7864)
Picture Options
✎✎ When the TV is connected to a PC, you can only make
Eco Solution
Media Play
■■Energy Saving (Off / Low / Medium / High / Picture Off) :
This adjust the brightness of the TV in order to reduce power
consumption. If you select Picture Off, the screen is turned
off, but the sound remains on. Press any button except volume
button to turn on the screen.
■■No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets
how quickly the TV switches to standby mode, if no picture is
being received.
✎✎ Disabled when the PC is in power saving mode.
■■Auto Power Off (Off / On): The TV will be automatically turned
off when no user operation is received for 4 hours.
Enjoy photos, music and/or movie files saved on a
USB Mass Storage Class (MSC) device.
❑❑ Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music, and/or movie
files to the USB jack on the back of the TV. A pop up window
appears.
Auto Protection Time
■■Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10
hours): If the screen remains idle with a still image for a certain
period of time you define, the screen saver is activated to prevent
the formation of ghost images on the screen.
3. Press the MEDIA.P button on your remote. The Media Play
menu appears.
❑❑ Using the Media Play Menu
Support Menu
Media Play
Self Diagnosis
Videos
■■Picture Test: Use to check for picture problems. If the problem
appears in the test picture, select Yes and follow the directions
on the screen.
■■Sound Test: Use the built-in melody sound to check for sound
problems. If the problem occurs during the test, select Yes and
follow the directions on the screen.
■■Signal Strength: (Digital channels only) An HD channel’s
reception quality is either perfect or the channels are unavailable.
Adjust your antenna to increase signal strength.
■■Reset: Reset all settings to the factory defaults.
✎✎ The PIN input screen appears before the setup screen.
✎✎ Enter your 4-digit PIN. Change the PIN using the Change
PIN option.
Software Upgrade
Software Upgrade can be performed by downloading the latest
firmware from samsung.com to a USB memory device.
MEDIA.P
USB
■ Change Device
E Enter R Return
To open Media Play in the Menu, follow these steps:
1. Press the MENU button. Then, press the ▲ or ▼ button to
select Applications on the left, and then press the ENTERE
button.
2. Press the ▲ or ▼ button to select Media Play (USB), and then
press the ENTERE button.
3. Press the ◄ or ► button to select an icon (Videos, Music,
Photos, Settings), and then press the ENTERE button.
✎✎ Media Play might not work properly with unlicensed
multimedia files.
✎✎ Need-to-Know List before using Media Play (USB)
xxThe file system supports FAT16, FAT32 and NTFS.
xxCertain types of USB Digital camera and audio devices may not
Use Mode
be compatible with this TV.
xxMedia Play only supports USB Mass Storage Class (MSC)
You can turn the TV into a display model for retail environments by
setting Use Mode to Store Demo.
devices. MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card
Readers. Devices should be connected directly to the TV’s USB
port. USB HDD is not supported.
xxBefore connecting your device to the TV, please back up your
files to prevent them from damage or loss of data. SAMSUNG is
not responsible for any data file damage or data loss.
xxA USB device that requires high power (more than 0.5A) may not
be supported.
xxDo not disconnect the USB device while it is loading.
xxThe higher the resolution of the image, the longer it takes to
display on the screen.
xxThe maximum supported JPEG resolution is 15360 x 8640 pixels.
xxIf a file is corrupted or the TV does not support the file type, the
“Not Supported File Format” message appears.
xxThe TV cannot play MP3 files with DRM that have been
downloaded from a for-pay site. Digital Rights Management
(DRM) is a technology that supports the creation, distribution,
and management of digital content in an integrated and
comprehensive way, including protecting the rights and interests
of content providers, preventing illegal copying of contents, and
managing billing and settlements.
xxPTP devices are not supported.
xxIf an over-power warning message is displayed while you are
connecting or using a USB device, the device may not be
recognized or may malfunction.
✎✎ For all other uses, select Home Use.
✎✎ With Store Demo, some functions are disabled, and the TV
automatically resets itself after a preset amount of time.
HD Connection Guide
Refer to this information when connecting external devices to the
TV.
Contact Samsung
View this information when your TV does not work properly or
when you want to upgrade the software. You can find information
regarding our call centers and how to download products and
software.
-8-
2015-03-03 오후 7:59:26
xxIf the TV has no input during the time period set in Auto
Protection Time, the Screen saver will run.
xxThe power-saving mode of some external hard disk drives may
be released automatically when your connect them to the TV.
xxIf you use a USB extension cable, the TV may not recognize the
USB device or may not be able to read the files on the device.
xxIf a USB device connected to the TV is not recognized, the list of
files on the device is corrupted, or a file in the list is not played,
connect the USB device to a PC, format the device, and check
the connection.
xxIf a file you deleted from the PC is still found when you run Media
Play, use the “Empty the Recycle Bin” function on the PC to
permanently delete the file.
xxPhotos only supports the sequential jpeg format.
xxThe Videos option does not support the scene search and
thumbnail functions.
xxIf the number of files and folders saved on a USB storage device is
over approximately 4000, the files and folders may not appear and
some folders may not open.
xxThe maximum displayed number of files, including sub folders, in
one folder of USB storage device is 2000.
xxThe media may not be playing smoothly when using the device
lower than USB 2.0.
yySupported Video Formats
File
Extension
Container
Video Codec
Motion JPEG
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.mov
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.flv
*.vob
*.svi
*.divx
Videos
Video Decoder
Resolution
Frame
rate(fps)
640x480
Bit rate
(Mbps)
Audio
Codec
8
Movie 01.avi
00:04:03 / 00:07:38
Divx 3.11 / 4
/5/6
MAX 30
1920x1080
30
Window
Media Video
v9(VC1)
AC3
LPCM
ADPCM
(IMA, MS)
AAC
HE-AAC
WMA
DD+
MPEG(MP3)
DTS (Core ,
LBR)
G.711(ALaw, μ-Law)
Vorbis is supported for up to 2 channels.
SUM
The DTS LBR codec is only available for MKV / MP4 /TS
containers.
2. Press the ◄/►/▲/▼ buttons to select a photo in the file list.
3. Press the ENTERE button or � (Play) button.
✎✎ NOTE
Music
I Love You.mp3
Playlist
1st Album
Pop
2010
4.2MB
xxWhile a photo list is displayed, press the � (Play) / ENTERE
button on the remote control to start a slide show.
3/15
xxAll files in the file list section will be displayed in the slide show.
xxDuring the slide show, files are displayed in order.
xxDuring the slide show, you can adjust the slide show speed
I Love you
Jhon
Music 1
No Singer
Music 3
using (π) (REW) or (µ) (FF) button.
No Singer
xxYou can move to other files using ◄ or ► button.
Music 4
No Singer
Music 5
1920x1080
6~30
20
Vorbis
Other Restrictions
yyCodecs may not function properly if there is a problem with the
content.
yyVideo content does not play or does not play correctly if there is
an error in the content or container.
E Pause L Jump T Tools R Return
1. In the Media Play menu, press the ◄ or ► button to select
Videos, and then press the ENTERE button.
yySound or video may not work if they have standard bit rates/
frame rates above the TV’s compatibility ratings.
2. Press the ◄/►/▲/▼ buttons to select a video in the file list.
yyIf the Index Table is has an error, the Seek (Jump) function will
not work.
3. Press the ENTERE button or � (Play) button.
-- The file name is displayed on the top of the screen with the
playing time.
yyWhen playing video over a network connection, the video may
not play smoothly because of data transmission speeds.
--
If video time information is unknown, playing time and the
progress bar are not displayed.
yySome USB/digital camera devices may not be compatible with
the TV.
--
During video playback, you can search using the ◄ and
► buttons.
yyWhile the TV is playing a video at the bit rate of 10 Mbps or
higher, the menu screens may be displayed slowly.
USB
✎✎ Media Play can play Music files automatically during a Slide
Show if Background Music is set to On.
E Pause L Jump T Tools R Return
✎✎ You cannot change the Mode in Background Music until the
1. In the Media Play menu, press the ◄ or ► button to select
Music, and then press the ENTERE button.
Background Music file has finished loading.
yySupported Photo Formats
2. Press the ◄/►/▲/▼ buttons to select the desired Music in the
file list.
Image
3. Press the ENTERE button or � (Play) button.
✎✎ During music playback, you can search using the ◄ and
► button.
✎✎ � (REW) and μ (FF) buttons do not function during
play.
✎✎ Media Play only displays files with MP3 and PCM file
extension. Other file extensions are not displayed, even if they
are saved on the same USB device.
✎✎ If the sound is abnormal when playing MP3 files, adjust the
Equalizer in the Sound menu. (An over-modulated MP3 file
may cause a sound problem.)
✎✎ In this mode, you can play movie clips contained in a game,
JPEG
Resolution
Base-line
15360 x 8704
Progressive
1024 x 768
.ttxt
SAMI
.smi
SubRip
.srt
SubViewer
.sub
Micro DVD
.sub or .txt
SubStation Alpha
.ssa
Advanced SubStation Alpha
.ass
Container
Format
Xsub
AVI
Picture Format
SubStation Alpha
MKV
Text Format
Advanced SubStation Alpha
MKV
Text Format
SubRip
MKV
Text Format
MPEG-4 Timed text
MP4
Text Format
c
You can adjust the picture size to
your preference.
1. On the File List screen, highlight a file, and then press the Yellow
button on your remote.
2. Repeat Step 1 to select multiple files.
✎✎ NOTE
2. Press the TOOLS button, select Play Folder, and then press
the ENTERE button.
c
below.
c
Subtitle
Settings
You can play the video with
Subtitles. This function only works
if the subtitles have the same file
name as the video.
c
c
xxDo not use screws that do not comply with the VESA standard
c
xxDo not use screws that are longer than the standard dimension
Audio
Language
c
Stop Slide
Show /
Start Slide
Show
You can start or stop a Slide
Show.
c
Slide Show
Speed
You can select the slide show
speed during the slide show.
c
Background
Music
You can set and select
background music when
watching a Slide Show.
c
Product
Family
Zoom
You can zoom into images in full
screen mode.
c
LED-TV
Rotate
You can rotate images in full
screen mode.
Stand Assembly
• If you have any trouble assembling the stand, refer to “Install the Stand” in the Start Up or Stand Installation Guide.
Cannot find a channel
• Re-run Plug & Play or run Auto Program. (go to MENU - Channel - Auto Program)
Poor Picture
First, perform the Picture Test and to see if your TV is displaying the test image properly.
Go to MENU - Support - Self Diagnosis - Picture Test
If the test image is properly displayed, the poor picture may be caused by the source or signal.
• If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to
deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD channels from the channel line up.
• Air/Cable Antenna connection: Try HD channels after running Auto Program.
✎✎ Many HD channels broadcast up scaled SD (Standard Definition) content. The picture quality of up
scaled SD content is low.
• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
TV size in
inches
VESA screw hole
specs (A * B) in
millimeters
C (mm)
32
200 X 200
31.3 ~ 32.3
c
c
• Check the Caption Setup menu. Try changing Caption Mode Service1 to CC1.
• Some channels may not have caption data.
The picture is distorted: macroblock,
error, small block, dots, pixelization.
• Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in
sports and action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
Others
Caution: Pulling, pushing, or climbing onto the TV
may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV; doing
so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided
on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
To prevent the TV from falling
✎✎ Since the necessary brackets, screws, and string or cable are
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on
the wall.
For detailed information about installing the wall mount, see
the instructions provided with the wall mount items. Contact a
technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the wall
mount on your own.
TV
Wall mount
Adapter
✎✎ If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean it before watching
the TV.
✎✎ The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using
a soft cloth to prevent scratches.
Clean the product with a soft cloth
dampened with in a small amount of
water. Do not use a flammable liquid
(e.g. benzene, thinners) or a cleaning
agent.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the
DivX VOD section of your device setup menu.
The picture will not display in full screen.
• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
• Black bars on the top and bottom appear when movies that have aspect ratios different from your TV play on the
TV.
• Adjust the picture size option on your external device or change the TV to full screen.
This device supports DivX Plus Streaming® for enjoying HD movies and TV shows with advanced features
(multi-language subtitles, multiple audio tracks, chapters, smooth FF/RW, etc.) streamed to your device.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274.
Color is wrong or missing.
• If you’re using a component connection, make sure the component cables are connected to the correct jacks.
Incorrect or loose connections may cause color problems or a blank screen.
There is poor color or brightness.
• Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)
• Adjust the Energy Saving option in the TV menu. (go to MENU - Setup - Eco Solution - Energy Saving )
• Try resetting the picture to the default picture settings. (go to MENU - Picture - Picture Reset)
The cable/set top box remote control
does not turn the TV on or off, or adjust
the volume.
• Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for
the SAMSUNG TV code.
There is a dotted line on the edge of
the screen.
• If the picture size is set to Screen Fit, change it to 16:9.
• Change the cable/satellite box resolution.
A “Mode Not Supported” message
appears.
• Check the supported resolution of the TV and adjust the external device’s output resolution accordingly. Refer to
resolution settings in this manual.
The picture is black and white.
• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of Component Input 1
on the TV.
Caption on the TV menu is greyed out.
When changing channels, the picture
freezes or is distorted or delayed.
• If connected to a cable box, please try to reset it. (Reconnect the AC cord and wait until the cable box reboots. It
may take up to 20 minutes)
• Set the output resolution of the cable box to 1080i or 720p.
• You cannot select Caption in the TV menu when watching content from a device connected via HDMI or
Component.
• Caption must be activated on the external device.
Open Source Announcement
There is a plastic smell from the TV.
• This smell is normal and will dissipate in a few days.
To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss.request@samsung.com).
TV Signal Strength is unavailable in the
Self Diagnosis Test menu.
• This function is only available for digital channels received through an Antenna / RF/Coax connection.
TV is tilted to the right or left side.
• Remove the stand base from the TV and reassemble it.
The Channel menu is grey out
(unavailable).
• The Channel menu is only available when you select the TV source.
The picture is good, but there is no
sound.
• If you are using an external device, check the device’s audio output option Ex. you may need to change your
cable box’s audio option to HDMI if the box is connected to your TV using an HDMI cable.
• Reboot the connected device by reconnecting the device’s power cable.
Your settings are lost after 30 minutes or
every time the TV is turned off.
• If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from
Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select
TV mode, go to MENU → Setup → Plug & Play → ENTERE.
The speakers are making an
inappropriate noise.
• Check the cable connections. Make sure a video cable is not connected to an audio input.
• For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.
• Perform the Sound Test as explained above.
You have intermittent loss of audio or
video.
• Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible
enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree
connectors.
You see small particles when you look
closely at the edge of the frame of
the TV.
• This is part of the product’s design and is not a defect.
•
POP (TV’s internal banner ad) appears
on the screen.
• Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).
No Picture, No Video
The TV will not turn on.
The TV turns off automatically.
• Make sure the AC power cord is securely plugged into the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote.
If the TV turns on, refer to ‘Remote control does not work’ below.
• Ensure the Sleep Timer is set to Off in the Time menu.
• If your PC is connected to the TV, check your PC power settings.
• Make sure the AC power cord is plugged securely into the wall outlet and the TV.
• When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes
if there is no signal.
Vertical
Frequency
(Hz)
Pixel Clock
Frequency
(MHz)
Sync
Polarity
(H / V)
640 x 350
720 x 400
640 x 480
832 x 624
1152 x 870
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 800
1280 x 1024
1280 x 1024
1366 x 768
1440 x 900
1600 x 900RB
1680 x 1050
1920 x 1080
31.469
31.469
35.000
49.726
68.681
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
45.000
49.702
63.981
79.976
47.712
55.935
60.000
65.290
67.500
70.086
70.087
66.667
74.551
75.062
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.000
59.810
60.020
75.025
59.790
59.887
60.000
59.954
60.000
25.175
28.322
30.240
57.284
100.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
74.250
83.500
108.000
135.000
85.500
106.500
108.000
146.250
148.500
+/-/+
-/-/-/-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
-/+
+/+
+/+
+/+
-/+
+/+
-/+
+/+
1366 x
768
1920 x
1080
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
If the TV seems to have a problem, first review this list of possible problems and solution. If none of these troubleshooting tips apply, visit
samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.
Problem
Possible Solution
Flickering and Dimming
If your Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy efficient
features like the Energy Saving feature. Follow the steps below with your remote to turn these features off or on.
yy Energy saving : MENU → Setup → Eco Solution → Energy Saving →Select Settings
Component Connections /
Screen Color
If you find that the color on your Samsung television’s screen is not correct or black and white, first run a Self
Diagnosis Test on the TV to make sure there are no device issues.
yy Self Diagnosis : User Menu → Support → Self Diagnosis → Picture Test
yy If the test is ok, try making sure ;
yy Your connections are all consistent. For example, if you’ve used the AV In jack on your TV, make sure you have
used the AV Out jack on your video source.
yy Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled
Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the
video source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.
Screen Brightness
If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings
you should check before calling for a repair.
yy Backlight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go to “Picture” in the Menu, and then try
adjusting these options.
Unwanted Powering off
If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco
friendly No Signal Power Off feature.
First make sure the Sleep Timer is not accidentally set. The Sleep Timer lets you fall asleep with the TV still on
knowing that it will turn off after a certain period of time and not waste energy.
yy Sleep Timer : User Menu → Setup → Time → Sleep Timer
If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.
yy No Signal Power Off : User Menu → Setup → Eco Solution → No Signal Power
yy Auto Power Off : User Menu → Setup → Eco Solution → Auto Power Off
Specifications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C )
5% to 95%, non-condensing
Model Name
Display Resolution
Screen Size
(Diagonal)
UN32J4000/UN32J400D
UN32J5003
1366 x 768
1920 x 1080
32" Class
(31.5" measured diagonally)
32" Class
(31.5" measured diagonally)
Sound
Output
License
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license.
• Check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.
Horizontal
Frequency
(KHz)
- 12 -
Storage and Maintenance
Do not spray water directly onto the
product. Any liquid that goes into the
product may cause a failure, fire, or
electric shock.
Resolution
Troubleshooting
- 11 -
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
There is no sound or the sound is too
low at maximum volume.
MAC
VESA DMT
2. Using screws, insert the screws through the TV brackets, and
then fasten the screws to the top VESA screw holes on the back
of the TV.
3. Connect the brackets on the TV and the brackets on the wall
with a strong string or cable, and then tie the string or cable
tightly to the brackets.
✎✎ Verify all connections are properly secured. Periodically check
the connections for any sign of fatigue or failure. If you have
any doubt about the security of your connections, contact a
professional installer.
✎✎ Install the TV close to the wall so that it does not fall.
✎✎ Connect the string or cable so that the brackets on the wall
are at the same height or lower than the brackets on the TV.
Untie the string or cable before moving the TV.
✎✎ To purchase a TV Holder kit, contact Samsung customer care.
• Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in
sports and action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.
Perform the Sound Test to confirm that your TV audio is properly operating.
(go to MENU - Support - Self Diagnosis - Sound Test)
If the audio is OK, the sound problem may be caused by the source or signal.
slot is beside the “K” icon.
1. Insert the screws into the wall brackets and firmly fasten them to
the wall. Make sure the screws are firmly fixed to the wall.
✎✎ We strongly recommend you drive the screws into a stud.
• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the settop-box has a grounding issue. Replace the Component video cables with an HDMI connection.
• Replace the remote control's batteries. Make sure you insert them with the polarity (+/–) correct .
• Clean the transmission window located on the top of the remote control.
• Try pointing the remote directly at the TV from 5~6 feet away.
IBM
✎✎ The position and color may differ depending on the model.
not supplied, please purchase these separately.
The picture is distorted: macroblock
error, small block, dots, pixelization.
Sound Problems
4
Purple/green rolling horizontal bars and
buzzing noise from the TV speakers with
Component cable connection.
The remote control does not work.
Mode
✎✎ Please find a “K” icon on the rear of the TV. The Kensington
Securing the TV to the Wall
Other Information
• Make sure the coaxial cable is connected securely.
• Run Auto Program to add available channels to the channel list.
go to MENU - Channel - Auto Program then select Auto and make sure the correct Cable TV signal type is set
in the menu. There are 3 options. (STD, HRC and IRC)
• Verify the antenna is positioned correctly.
No Caption on digital channels.
M8
Do not install your Wall Mount Kit while
your TV is turned on. It may result in
personal injury due to electric shock.
RF (Cable/Antenna) Connection
The TV is not receiving all channels.
Standard
Quantity
Screw
c
- 10 -
• Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).
• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV
input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the correct input source by pressing the SOURCE button on the remote control.
• Reboot the connected device by reconnecting the device’s power cable.
or do not comply with the VESA standard screw specifications.
Screws that are too long may cause damage to the inside of the
TV set.
xxFor wall mounts that do not comply with the VESA standard
screw specifications, the length of the screws may differ
depending on the wall mount specifications.
xxDo not fasten the screws too firmly. This may damage the
product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
xxSamsung is not liable for product damage or personal injury
when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
xxDo not mount the TV at more than a 15 degree tilt.
xxAlways have two people mount the TV on a wall.
c
C
There is no picture/video.
Optimal resolution: 4 series:1366 x 768@60Hz / 5 series: 1920 x 1080@60Hz
screw specifications.
You can change the audio
language if the video has more
than one language.
c
Display Modes (HDMI/DVI Input)
The Kensington Lock is not supplied by Samsung. It is a device
used to physically fix the system when using it in a public place.
Refer to the manual provided with the Kensington Lock for additional
information on proper use.
manual and all parts necessary for assembly are provided.
c
can select the digital audio
Audio Format You
output format.
You can see detailed information
about the played file.
Kensington Lock
xxWhen purchasing our wall mount kit, a detailed installation
c
Wall mount
bracket
Before you turn the TV on, find the red light on the right or left bottom of your TV. Press the power on button
on the TV or remote and the light should blink about 5 times before the TV turns on.
If you find that you are having trouble powering on your Samsung television, there are a number of things to check it
before making a call to the service department.
yy If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you
press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your
keyboard or move the mouse. Then try turning your TV on.
Install your wall mount on a solid wall perpendicular to the floor.
When attaching to other building materials, please contact your
nearest dealer. If you install the TV on a ceiling or slanted wall, it
may fall and result in severe personal injury.
✎✎ NOTE
xxStandard dimensions for wall mount kits are shown in the table
Using the Setup Menu
1. With the folders on your USB device displayed, use the
◄/►/▲/▼ buttons to highlight a folder.
If you’re sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If
you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a
signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or satellite
box remote control. If the screen displays the guide or info data, the problem is caused by the box.
The TV image does not look as good as
it did in the store.
c
■■DivX® Video On Demand: Shows the registration code
authorized for the TV. If you connect to the DivX web site and
register with the 10-digit registration code, you can download
the VOD activation file. Once you play it using Media Play, the
registration is completed.
✎✎ For more information on DivX® VOD, visit “http://vod.divx.
com”.
■■Information: Select to view information about the connected
USB device.
3. Press the TOOLS button, select Play Selected Contents, and
then press the ENTERE button.
■■Playing a video/music/photo folder
-9-
Trouble Powering On
Photos
Playing Multiple Files
Internal
Name
Music
■■Playing selected video/music/photo files
Deselect All, and then the ENTERE button.
MPEG-4 timed text
You can select another video file
to play directly.
You can adjust the sound setting.
Settings
xxA c mark appears to the left of the selected files.
xxTo cancel a selection, press the Yellow button again.
xxTo deselect all selected files, press the TOOLS button, select
File extension
Videos
Sound Mode
yy CMYK, YCCK Color space JPEG are not supported.
External
Name
✎✎ The wall mount kit is not supplied, but sold separately.
c
Information
yySupported Subtitle Formats
--
Photo
Wall Mount Kit Specifications (VESA)
Picture Mode You can adjust the picture setting.
Other Restrictions
but you cannot play the game itself.
--
Picture Size
1. In the Media Play menu, press the ◄ or ► button to select
Photos, then press the ENTERE button.
Dolby Digital Plus is supported for up to 5.1 channels.
Operation
can play movie and music
Repeat Mode You
files repeatedly.
E Pause L Previous/Next T Tools R Return
No Singer
SUM
Title
No Singer
VP8
3/15
Category
Music 2
WebM
2010/2/1
QCELP and AMR NB/WB are not supported.
MPEG1
*.webm
1024x768
WMA 10 Pro supports up to 5.1 channels. Supports up to the M2
profile. WMA lossless audio is not supported.
MPEG2
1/1
Image1024.jpg
GMC 2 or above is not supported.
01:10 / 04:02
►
Normal
Supports up to H.264, Level 4.1
Audio Decoder
H. 264 BP /
MP / HP
MPEG4 SP/
ASP
Media Play - Additional Functions
■■Videos/Music/Photos Play Option menus
When playing a file, press the TOOLS button.
H.264 FMO / ASO / RS, VC1 / AP L4 are not supported.
H.264 BP/
MP/HP
AVI
MKV
ASF
MP4
3GP
MOV
FLV
VRO
VOB
PS
TS
Photos
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS,
the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark
of DTS, Inc. © DTS, Inc. All Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS,
the Symbol, DTS in combination with the Symbol, and DTS Studio Sound are registered trademarks or
trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.
10 W
Dimensions (W x H x D)
Body
With stand
Weight
Without Stand
With Stand
29.3 x 17.4 x 2.7 inches
(745.4 x 442.2 x 69.0 mm)
29.3 x 18.2 x 5.9 inches
(745.4 x 463.1 x 150.5 mm)
29.1 x 17.1 x 2.7 inches
(741.0 x 436.0 x 69.0 mm)
29.1 x 18.4 x 5.7 inches
(741.0 x 468.7 x 145.5 mm)
8.1 lbs (3.7 kg)
8.3 lbs (3.8 kg)
8.0 lbs (3.66 kg)
8.2 lbs (3.74 kg)
✎✎ Design and specifications are subject to change without prior notice.
✎✎ This device is a Class B digital apparatus.
✎✎ For information about the power required and more about power consumption, refer to the label attached to the product.
✎✎ Typical power consumption is measured according to Energy Star Program requirements for televisions.
✎✎ Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.
samsung.com/recyclingdirect or call, (877) 278-0799.
■■JACK PANEL DETAIL / REAR VIEW
Manufactured under license from Dolby Laboratories.
1
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
2
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
4
5
3
(Unit: inches)
Model name
UN32J4000/UN32J400D
UN32J5003
1
4.5
4.2
2
10.7
10.6
3
4.7
4.7
4
8.0
7.9
5
6.6
6.4
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions
prior to performing installation of your TV. Not responsible for typographical or printed errors.
© 2015 Samsung Electronics America, Inc
✎✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may
be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
✎✎ Watch these troubleshooting on video at www.samsung.com/spsn.
✎✎ Some functions and pictures shown in this manual are available on specific models only.
✎✎ You can keep your TV in optimum condition by upgrading it with the latest firmware from the Samsung web site (samsung.com
→ Support → Downloads). To upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick,
insert the USB memory stick into the TV's USB slot, and then select Support > Software Upgrade in the TV's menu.
- 13 -
[J4000-ZA]BN68-07180A-01ENG.indb 2
- 14-
- 15 -
- 16 -
2015-03-03 오후 7:59:29