Schwinn A15 Owner's Manual

Manual en Español Latino Americano: http://www.schwinnfitness.com

ASSEMBLY MANUAL / OWNER’S MANUAL

TABLE Of CONTENTS

Important Safety Instructions - Assembly 3

Safety Warning Labels / Serial Number 4

Specifications 4

Before Assembly 5

Parts 6

Hardware 7

Tools 7

Assembly 8

Leveling the Bike

Moving the Bike

13

13

Important Safety Instructions - Owner’s 14

Features 15

Console Features

Contact Heart Rate (CHR)

16

17

Operations 19

Adjustments

Quick Start / Manual Program

Profile Programs

Pausing or Stopping

Results

19

19

20

20

20

Changing Unit Measures

(English Imperial/Metric) 20

Maintenance 21

Troubleshooting 24

Warranty 27

To validate warranty support, keep the original proof of purchase and record the following information:

Serial Number __________________________

Date of Purchase ____________________

To register your product warranty , go to: www.SchwinnFitness.com/register

Or call 1 (800) 605–3369.

If you have questions or problems with your product, please call 1 (800) NAUTILUS (628–8458)

Or go to: www.SchwinnFitness.com

2

Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, [email protected] | outside U.S. +01-360-859-5180, [email protected] | © 2012 Nautilus, Inc..

IMpORTANT SAfETY INSTRUCTIONS

— ASSEMBLY

!

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Obey the following warnings:

Read and understand all warnings on this machine.

!

Carefully read and understand the Assembly instructions.

• Keep bystanders and children away from the product you are assembling at all times.

• Do not connect power supply to the machine until instructed to do so.

• Do not assemble this machine outdoors or in a wet or moist location.

• Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders.

• Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.

• Set up this machine on a solid, level, horizontal surface.

• Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and will void the warranty.

• If replacement parts are necessary, use only genuine Nautilus ® replacement parts and hardware. Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty.

• Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the

Manual.

• Read and understand the complete Manual supplied with this machine before first use. Keep the Manual for future reference.

• Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.

• This product contains magnets. Magnetic fields can interfere with the normal use of certain medical devices at a close range. Users may come into proximity of the magnets in the assembly, maintenance, and/or use of the product. Given the obvious importance of these devices, such as a pacemaker, it is important that you consult with your medical provider in connection with the use of this equipment. Please consult the “Safety Warning Labels and Serial Number” section to determine the location of the magnets on this product.

3

SAfETY WARNINg LABELS ANd SERIAL NUMBER

Serial number

•

•

•

•

•

•

•

•

•

•

•

•

FCC Compliance

!

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The power supply complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This power supply has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

4

SpECIfICATIONS

Maximum User Weight: 275 lbs. (125 kg)

Power Requirements: 4 D Batteries (LR20) – not included

Operational Voltage: 6VDC

Regulatory Approvals:

Optional AC Power Adapter: UL listed, CSA certified (or equivalent), Rated 120V 60Hz Input, 9VDC, 500mA Output.

Class 2 or LPS.

!

This product, its packaging, and components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This Notice is provided in accordance with California’s Proposition

65. If you would like additional information, please refer to our website at www.nautilus.com/prop65.

50” (126cm)

27.5” (67cm)

19” (48cm)

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a workout area of a minimum 67” x 56” (1.7m x 1.42m).

Basic Assembly Tips

Follow these basic points when you assemble your machine:

1. Read and understand the “Important Safety Instructions” before assembly.

2. Collect all the pieces necessary for each assembly step.

3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclockwise) to loosen, unless instructed otherwise.

4. When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.

5. The assembly can require 2 people.

5

pARTS

7

8

2

10 (L)

9

6

12

1

5

4

11 (R)

3

Item Qty Description

1 1 Main Frame

2

3

4

5

6

1 Front Stabilizer

1 Rear Stabilizer

1 Seat Post

1

1

Adjustment Knob (pre-installed)

Seat

Note: Media Cable is in the Console box.

Item Qty Description

7 1 Console Mast (with pre-installed Handlebar Bracket)

8 1 Console

9 1 Handlebars

10 1 Left Pedal (L)

11 1 Right Pedal (R)

12 1 Water Bottle Holder

6

HARdWARE / TOOLS

A

Item Qty Description

A 4 Carriage Bolt M8 x 65

B 8 Arc Washer M8

B C D

Item Qty Description

C 4 Acorn Nut M8

D 4 Hex Screw M8 x 15

Tools

6 mm

13mm/17mm

15 mm

(recommended)

7

ASSEMBLY

1. Attach Stabilizers to Main Frame

Note: Make sure the Schwinn ® decal on the Rear Stabilizer faces outward from the machine.

X4

A

2

1

X4

C

B

3

2. Install Pedals

Note: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation is based from a seated position on the bike. The Left Pedal has an “L”, the Right Pedal an “R”.

11 (R)

10 (L)

8

3. Attach Seat to Seat Post and Frame

Note: Hardware is pre-installed on Seat and not on Hardware Card.

NOTICE: The Adjustment Knob is pre-installed on the Main Frame. Make sure the Adjustment Knob engages the Seat

Post.

!

Do not set the Seat Post position higher than the stop mark (MAX) on the tube.

X3

4

5

4. Install Console Mast on Main Assembly

NOTICE: Align the clips on the cable connectors and make sure the connectors lock. Do not crimp Console Cable.

7

B

D

X4

6mm

9

5. Install Handlebars on Console Mast

Note: Hardware is pre-installed on Console Mast and not on Hardware Card.

NOTICE: Make sure the Handlebar Bracket has an equal distance between the two ends of the bracket and the bracket mount on the Console Mast.

Do not crimp the cables. Route the HR cable through the side hole in the mast to the top of the mast. Push the grommet on the cable into the hole to keep the HR cable in position.

9

=

=

6mm

X2

10

6. Install Console on Console Mast

Note: Remove the pre-installed screws from the back of the Console before you connect the cables.

NOTICE: Do not crimp the cables. Make sure that the switch on the back of the Console is set to B (bike).

8

#2

7. Install Water Bottle Holder

Note: The hardware is pre-installed on the Console Mast and not on the hardware card.

12

X2

6mm

11

8. Install Batteries in Console

Note: The console uses D size batteries (LR20). Make sure that the batteries point in the direction of the +/– indicators in the battery bay. If you use rechargeable batteries, the optional power adapter will not recharge the batteries.

!

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc) batteries.

+

–

X4

Optional Power Adapter

The console for your machine can operate on battery power or AC power. For AC power, it is necessary to order the optional Power Adapter. If batteries and the Power Adapter are installed, the console will use the Power Adapter to operate.

Note: If you use rechargeable batteries, the optional Power Adapter will not recharge the batteries.

After the machine is fully assembled, connect the Power Adaptor to the console and the wall outlet.

NOTICE: If you use a power adapter for your bike, make sure that the cord stays clear of the path of the pedals.

Attach the cord to the machine as shown:

NOTICE: It is recommended to remove batteries when they are not used, to avoid damage from battery corrosion.

To order the optional Power Adapter, go to: www.schwinnfitness.com/powersupply

Or call 1 (800) 605–3369.

9. Final Inspection

Inspect your machine to ensure that all hardware is tight and components are properly assembled.

Be sure to record the serial number in the field provided at the front of this manual.

!

Do not use or put the machine into service until the machine has been fully assembled and inspected for correct performance in accordance with the Owner’s Manual.

12

BEfORE YOU START

Leveling Your Bike

The levelers are the polygonal end caps on the Rear Stabilizer. Turn the end cap to adjust the level.

Make sure the bike is level and stable before you exercise.

Moving Your Bike

To move the upright bike, carefully tilt the Handlebars toward you while pushing the front of the bike downward. Push the bike to the desired location.

NOTICE: Be careful when you move the bike. Abrupt motions can affect the computer operation.

13

IMpORTANT SAfETY INSTRUCTIONS

!

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Before using this equipment, obey the following warnings:

!

Read and understand the complete Manual. Keep the Manual for future reference.

Read and understand all warnings on this machine. If at any time the Warning stickers become loose, unreadable or dislodged, contact Nautilus ® Customer Service for replacement stickers.

• Children must not be let on or near to this machine. Moving parts and other features of the machine can be dangerous to children.

• Not intended for use by anyone under 14 years of age.

• Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest, become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated or measured by the machine’s computer for reference purposes only.

• Before each use, examine this machine for loose parts or signs of wear. Do not use if found in this condition. Monitor the Seat, Pedals, and Crank Arms closely. Contact Nautilus® Customer Service for repair information.

• Maximum user weight limit: 275 lbs. (125 kg). Do not use if you are over this weight.

• This machine is for home use only.

• Do not wear loose clothing or jewelry. This machine contains moving parts. Do not put fingers or other objects into moving parts of the exercise equipment.

• Set up and operate this machine on a solid, level, horizontal surface.

• Make the Pedals stable before you step on them. Use caution when you step on and off the machine.

• Disconnect all power before servicing this machine.

• Do not operate this machine outdoors or in moist or wet locations. Keep the foot pedals clean and dry.

• Keep at least 24” (0.6 m) on each side of the machine clear. This is the recommended safe distance for access and passage around and emergency dismounts from the machine. Keep third parties out of this space when machine is in use.

• Do not over exert yourself during exercise. Operate the machine in the manner described in this manual.

• Correctly adjust and safely engage all Positional Adjustment Devices. Make sure that the Adjustment Devices do not hit the user.

• Exercise on this machine requires coordination and balance. Be sure to anticipate that changes in speed and resistance level can occur during workouts, and be attentive in order to avoid loss of balance and possible injury.

14

fEATURES

K

H

I

J

G

A

B

C

D

E

F

S

N

Q

P

A Console

B Handlebars, Upright

C Adjustable Seat

D Adjustment Knob

E Fully Shrouded Flywheel

F Levelers

G Stabilizers

H Transport Rollers

I Pedals

J Water Bottle Holder

K Contact Heart Rate (CHR) Sensors

L Power Connector

M Battery Bay

N Machine Type Switch

O Media Tray

P MP3 Input

Q Speakers

R Headphones Output

S Media Cable

Q

O

M

L

R

15

Console Features

The Console provides important information about your workout and lets you control the resistance levels while you exercise. The Console has a grid display with touch control buttons to navigate you through the exercise programs.

Keypad Functions

QUICK START

START/STOP

FUN RIDES

MOUNTAINS

CHALLENGES

ENTER

Increase ()

Decrease ()

Begins a Quick Start workout

Starts a Program workout, pauses an active workout, and if pushed again, will end the workout

Begins selection of a FUN RIDES workout

Begins selection of a MOUNTAINS workout

Begins selection of a CHALLENGES workout

Confirms information

Increases a value (time or workout resistance level)

Decreases a value (time, or workout resistance level)

Note: The Console keypad will not adjust the sound output for a connected media device. Use the volume control on the media device.

LCD Display Data

Program Display

The Program Display shows the name of the program selection and the grid area shows the course profile for the program. Each column in the profile shows one interval (workout segment). The higher the column, the higher the resistance level for that interval. The flashing column shows your current interval.

Program display

Battery indicator

Time

The TIME display field shows the time count in the workout. If no preset time is set up for the current workout program, the display value starts at zero and counts forward until the end of the workout. Maximum time is 99:59.

If the workout has a preset time, the display starts at the preset value and counts down to zero. The display shows the total time count for the workout.

16

Speed / Distance

The SPEED/DISTANCE display field shows the machine speed in kilometers per hour (km/h) or miles per hour (mph) for 6 seconds, then the Distance for 6 seconds. The Distance display shows the distance count (miles or km) in the workout.

Note: To change the measurement units to English Imperial or metric, refer to the “Changing Unit Measures” section in this manual.

RPM / KCAL (Calories)

The RPM/KCAL display field shows the machine revolutions per minute (RPM) for 6 seconds, then the KCAL display shows the estimated calories that you have burned during the exercise for 6 seconds.

Level / HR (Heart Rate)

The LEVEL/HR display field shows the current resistance level (1–8) for 6 seconds, then your Heart Rate for 6 seconds.

The HR display shows the heart rate in beats per minute (BPM) from the Contact Heart Rate sensors.

!

Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest, become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated or measured by the machine’s computer for reference purposes only.

Results Indicator

The RESULTS indicator comes on when the Console shows the workout data results.

Battery Indicator

The Battery Indicator comes on when the battery power is low.

Contact Heart Rate Sensors

Contact Heart Rate (CHR) sensors send your heart rate signals to the Console. The CHR sensors are the stainless steel parts of the Handlebars. To use, put your hands comfortably around the sensors. Be sure that your hands touch both the top and the bottom of the sensors. Hold firm, but not too tight or loose. Both hands must make contact with the sensors for the Console to detect a pulse. After the Console detects four stable pulse signals, your initial pulse rate will be shown.

Once the Console has your initial heart rate, do not move or shift your hands for 10 to 15 seconds. The Console will now validate the heart rate. Many factors influence the ability of the sensors to detect your heart rate signal:

• Movement of the upper body muscles (including arms) produces an electrical signal (muscle artifact) that can interfere with pulse detection. Slight hand movement while in contact with the sensors can also produce interference.

• Calluses and hand lotion may act as an insulating layer to reduce the signal strength.

• Some Electrocardiogram (EKG) signals generated by individuals are not strong enough to be detected by the sensors.

CHR detection may be limited to walking or slow jogging due to the extreme muscle artifacts and hand motion generated by a comfortable running style. If your heart rate signal ever seems erratic after validation, wipe off your hands and the sensors and try again.

Heart Rate Calculations

Your maximum heart rate usually decreases from 220 Beats Per Minute (BPM) in childhood to approximately 160 BPM by age 60. This fall in heart rate is usually linear, decreasing by approximately one BPM for each year. There is no indication that training influences the decrease in maximum heart rate. Individuals of the same age could have different maximum heart rates. It is more accurate to find this value by getting a stress test than by using an age related formula.

Your at-rest heart rate is influenced by endurance training. The typical adult has an at rest heart rate of approximately 72

BPM, whereas highly trained runners may have readings of 40 BPM or lower.

The Heart Rate table is an estimate of what Heart Rate Zone (HRZ) is effective to burn fat and better your cardiovascular system. Physical conditions vary, therefore, your individual HRZ could be several beats higher or lower than what is shown.

17

The most efficient procedure to burn fat during exercise is to start at a slow pace and gradually increase your intensity until your heart rate reaches between 60 – 85% of your maximum heart rate. Continue at that pace, keeping your heart rate in that target zone for over 20 minutes. The longer you maintain your target heart rate, the more fat your body will burn.

The graph is a brief guideline, describing the generally suggested target heart rates based on age. As noted above, your optimal target rate may be higher or lower. Consult your physician for your individual target heart rate zone.

Note: As with all exercises and fitness regimens, always use your best judgment when you increase your exercise time or intensity.

FAT-BURNING TARGET HEART RATE

250

200

150

100

196

167

191

162

186

158

181

154

176

150

171

145

166

141

161

137

156

133

151

128

146

126

118 115

112

109 106

103

100 97

94 91

88

50

0

20-24 25-29 30-34 35-39 40-44 45-49 50-54 55-59 60-64 65-69 70+

Age

Maximum Heart Rate

Target Heart Rate Zone

(keep within this range for optimum fat-burning)

18

OpERATIONS

What to Wear

Wear rubber-soled athletic shoes. You will need the appropriate clothes for exercise that allow you to move freely.

How Often Should You Exercise

Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest, become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated or measured by the machine’s computer for reference purposes only.

• 3 times a week for 30 minutes each day.

• Schedule workouts in advance and try to follow the schedule.

Seat Adjustment

Correct seat placement encourages exercise efficiency and comfort, while reducing the risk of injury.

1. With a Pedal in the forward position, center the ball of your foot over the center of it. Your leg should be bent slightly at the knee.

2. If your leg is too straight or your foot cannot touch the Pedal, move the seat down on the upright bike. If your leg is bent too much, move the seat up.

!

Step off the bike before you adjust the seat.

Loosen and pull the adjustment knob on the seat tube. Adjust the seat to the desired height.

Release the adjustment knob to engage the locking pin. Be sure that the pin is fully engaged and fully tighten the knob.

!

Do not set the Seat Post position higher than the stop mark (MAX) on the tube.

Foot Position / Pedal Strap Adjustment

Foot pedals with straps provide secure footing to the exercise bike.

1. Put the ball of each foot on the Pedals.

2. Rotate the Pedals until one can be reached.

3. Fasten the strap over the shoe.

4. Repeat for the other foot.

Be sure toes and knees point directly forward to ensure maximum Pedal efficiency. Pedal straps can be left in position for subsequent workouts.

Power-Up / Idle Mode

The Console operates on (4) D sized batteries. Once installed, the Console will enter POWER-UP mode if any button is pushed, or if it receives an indication from the RPM sensor as a result of pedaling the machine.

Note: An optional power adapter is available from www.schwinnfitness.com/powersupply or call 1(800) 605–3369.

Auto Shut-Off (Sleep Mode)

If the Console does not receive any input or there is no pedal movement in approximately 5 minutes, it will automatically shut off. The LCD display is off while in Sleep Mode.

Quick Start / Manual Program

The Quick Start / Manual program lets you start a workout without entering any information.

1. Sit on the seat.

2. Push the QUICK START button and start to pedal.

3. To change the resistance level, push the Increase/Decrease buttons. The default Quick Start resistance level is 1. The time will count up from 00:00.

19

Changing Resistance Levels

Push the Increase() or Decrease() buttons to change the resistance level at any time in a workout program.

Profile Programs

These programs automate different resistances and workout levels.

Fun Rides

Rolling Hills Ride in the Park

Mountains

Challenges

To start a Profile Program:

1. Step on the machine.

2. Push the button for the desired Profile Program type: Fun Rides, Mountains or Challenges. The display shows the first option for that type—for example, the Rolling Hills program for the Fun Rides type. Push the button again to toggle between option 1 and option 2.

3. To adjust the time of the workout, push ENTER. The default value is 15 minutes. Use the Increase() or Decrease() buttons to change it, and push ENTER.

4. Use the Increase() and Decrease() buttons to change the resistance level (default level is 3, maximum level is 8), and push ENTER.

5. Push the START/STOP button to start the Profile workout.

Pausing or Stopping

1. Stop pedaling and push the START / STOP button to pause your workout.

2. To continue your workout, push START/STOP and start pedaling.

To end the workout, push the STOP/START button.

Results

When you complete, pause or cancel a workout, the Console will show your current workout value totals and averages. If there is no activity for 5 minutes, the Console will enter Sleep Mode.

Changing Unit Measures (English Imperial/Metric)

To change the measurement units (for distance and speed) to English Imperial or metric:

1. Push and hold the ENTER and START / STOP buttons for 3 seconds to go to Engineering Mode.

2. The display shows the current unit of measurement. Push the Increase/Decrease buttons to change between English

Imperial (MILES) or Metric (KM) units.

3. Push ENTER to set your selection.

20

MAINTENANCE

Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is necessary to do the necessary tasks.

!

Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that regular

WA R N I N G

D A N G E R

To reduce the risk of electrical shock, always unplug the power cord and wait 5 minutes before cleaning, maintaining or repairing this machine.

IMMEDIATE ACTION REQUIRED

C A U T I O N

Weekly:

Before each use, examine the exercise machine for loose, broken, damaged, or worn parts.

Do not use if found in this condition. Repair or replace all parts at the first sign of wear or damage.

After each workout, use a damp cloth to wipe your machine and Console free of sweat.

Note: Avoid excessive moisture on the Console.

Check for smooth seat adjustment operation. If needed, sparingly apply a thin coating of silicone lube to ease operation. Clean the machine to remove any dust, dirt or grime from the surfaces.

Note: Do not use petroleum based products.

Monthly

or after 20 hours:

Check pedals and crank arms and tighten as necessary. Make sure all bolts and screws are tight.

Tighten as necessary.

Yearly: Replace the console batteries every year (as necessary).

NOTICE: Do not clean with a petroleum based solvent or an automotive cleaner. Be sure to keep the Console free of moisture.

21

MAINTENANCE

V

T

H

J

X U

W

S

R

D

E

F

A

G

I

K

B

B

N

M

L

H

O

P

C

Q

D

C

P

O

E

F

G

H

A

B

C

D

Console

Console Mast

Pedals

Crank Arms

Battery Bay M

AC Power Connector N

Machine Type Switch O

Data Cable P

I

J

K

L

Handlebars

HR Cables

CHR Sensors

Seat

Seat Post

Adjustment Knob

Shrouds

Center Plates

Q

R

S

T

Levelers

Flywheel

Brake Assembly

RPM Sensor

U

V

Speed Sensor Magnet

Servo Motor

W Drive Belt

X Drive Pulley

22

Replacing the Console Batteries

If the Battery Indicator comes on, replace the batteries in the back of the console with fresh batteries. Make sure the batteries point in the +/– direction shown in the battery bay.

Note: The console uses D size batteries (LR20). If you use rechargeable batteries, the optional power adapter will not recharge the batteries.

!

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc) batteries.

+

–

X4

Machine Type Switch

The Machine Type switch on the Console is preset at the factory to B (bike) or E (elliptical). If you replace the console, it will possibly be necessary to set the switch for your machine. After you set the switch, it is necessary to turn the power off and then turn it back on to start the new mode of operation.

NOTICE: Make sure that the Machine Type is set correctly to give more accurate calculations for Distance, Speed and Calories values.

23

TROUBLESHOOTINg

code

Condition/Problem

No display/partial display/ unit will not turn on

Unit operates but Contact

HR not displayed

Console displays “E2” error code

No speed/RPM reading,

Console displays “E3” error

Things to Check

If bike has AC adapter, check electrical (wall) outlet

If bike has AC adapter, check connection at unit

If bike has batteries, check

Battery Indicator on console or check batteries.

Check data cable integrity

Solution

Make sure unit is plugged into a functioning wall outlet.

Connection should be secure and undamaged. Replace adapter or connection at unit if either are damaged.

Replace the batteries. It may be necessary to replace the batteries although the Battery Indicator is not on.

Check data cable connections/orientation

Check console display for damage

Console Display

HR cable connection at

Console

Sensor grip

All wires in cable should be intact. If any are visibly crimped or cut, replace cable.

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

Check for visual sign that console display is cracked or otherwise damaged. Replace Console if damaged.

If Console only has partial display and all connections are fine, replace the Console.

If the above steps do not resolve the problem, contact

Customer Care for further assistance.

Be sure cable is connected securely to Console.

Dry or calloused hands

Handlebars

Check data cable integrity

Check data cable connections/orientation

Console electronics

Check data cable integrity

Check data cable connections/orientation

Be sure hands are centered on HR sensors. Hands must be kept still with relatively equal pressure applied to each side.

Sensors may have difficulty with dried out or calloused hands. A conductive electrode cream such as “Signa

Crème” or “Buh-Bump” can help make better conduct.

These are available on the web or at medical or some larger fitness stores.

If tests reveal no other issues, Handlebars should be replaced.

All wires in cable should be intact. If any are cut or crimped, replace cable.

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

If tests reveal no other issues, Console should be replaced.

All wires in cable should be intact. If any are cut or crimped, replace cable.

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

Magnet should be in place on pulley. Check magnet position

(requires shroud removal)

Check RPM Sensor (requires shroud removal)

RPM sensor should be aligned with magnet and connected to data cable. Realign sensor if necessary.

Replace if there is any damage to the sensor or the connecting wire.

24

Console shuts off (enters sleep mode) while in use

Unit rocks/does not sit level

Pedals loose/unit difficult to pedal

Clicking sound when pedaling

Seat post movement

Check data cable integrity

Check data cable connections/orientation

Reset machine

If bike has batteries, check

Battery Level icon on console or check batteries.

Check magnet position (requires shroud removal)

Check RPM Sensor

Check leveler adjustment

All wires in the cable should be intact. If any are cut or crimped, replace cable.

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

Unplug unit from electrical outlet for 3 minutes. Reconnect to outlet.

If the battery level shows low or no power, replace the batteries.

Magnet should be in place on pulley.

Contact Customer Care for further assistance.

Leveling feet may be turned in or out to level bike.

Check surface under unit

Check pedal to crank connection

Check crank to axle connection

Check pedal to crank connection

Check locking pin

Check adjustment knob

Adjustment may not be able to compensate for extremely uneven surfaces. Move bike to level area.

Pedal should be tightened securely to crank. Be sure connection is not cross-threaded.

Crank should be tightened securely to axle.

Remove pedals and reattach fully.

Be sure adjustment pin is locked into one of the seat post adjustment holes.

Be sure knob is securely tightened.

25

26

[page intentionally left blank]

WARRANTY

Who Is Covered

This warranty is valid only to the original purchaser and is not transferable or applicable to any other person(s).

What Is Covered

Nautilus, Inc. warrants that this product is free from defects in materials and workmanship, when used for the purpose intended, under normal conditions, and provided it receives proper care and maintenance as described in the Product’s Assembly and Owner’s manual. This warranty is good only for authentic, original, legitimate machines manufactured by

Nautilus, Inc. and sold through an authorized agent and used in the United States or Canada.

Terms

•

•

•

•

•

Frame

Mechanical parts

Electronics

Wear items

3 years

1 year

1 year

60 days

Labor 60 days

(Labor support does not include the installation of replacement parts involved in the initial product assembly and preventative maintenance services.)

How Nautilus Will Support the Warranty

Throughout the terms of the warranty coverage, Nautilus, Inc. will repair any machine that proves to be defective in materials or workmanship. Nautilus reserves the right to replace the product in the event a repair is not possible. When Nautilus determines replacement is the correct remedy, Nautilus may apply a limited credit reimbursement toward another

Nautilus Inc. brand Product, at our discretion. This reimbursement may be prorated based on length of ownership. Nautilus, Inc. provides repair service within major metropolitan areas. Nautilus, Inc reserves the right to charge the consumer for travel outside these areas. Nautilus Inc. is not responsible for dealer labor or maintenance charges beyond the applicable warranty period(s) stated herein. Nautilus, Inc. reserves the right to substitute material, parts or products of equal or better quality if identical materials or products are not available at the time of service under this warranty. Any replacement of the product under the terms of the Warranty in no way extends the original Warranty period. Any limited credit reimbursement may be prorated based on length of ownership. THESE REMEDIES ARE THE EXCLUSIVE AND SOLE REMEDIES FOR ANY BREACH OF WARRANTY.

•

•

•

•

•

What You Must Do

• Retain appropriate and acceptable Proof of Purchase.

Operate, maintain, and inspect the Product as specified in the Product Documentation (Manuals, (Assembly, Owner’s Manuals, etc.).

Product must be used exclusively for the purpose intended.

Notify Nautilus within 30 days after detecting an issue with the Product.

Install replacement parts or components in accordance with any Nautilus instructions.

Perform diagnostic procedures with a trained Nautilus, Inc representative if requested.

•

•

•

What Is Not Covered

• Damage due to abuse, tampering or modification of the Product, failure to properly follow assembly instructions, maintenance instructions, or safety warnings as stated in the

Product Documentation (Assembly, Owner’s Manuals, etc), damage due to improper storage or the effect of environmental conditions such as moisture or weather, misuse,

• mishandling, accident, natural disasters, power surges.

A machine placed or used in a commercial or institutional setting. This includes gyms, corporations, work places, clubs, fitness centers and any public or privately entity that has a machine for use by its members, customers, employees or affiliates.

Damage caused by exceeding maximum user weights as defined in the Product’s Owner’s manual or warning label.

Damage due to normal usage and wear and tear.

This warranty does not extend to any territories or countries outside the United States and Canada.

How to Obtain Service

For Products purchased directly from Nautilus, Inc. contact the Nautilus office listed on the Contacts page of the products Owner’s manual. You may be required to return the defective component to a specified address for repair or inspection, at your expense. Standard ground shipping of any warranty replacement parts will be paid by Nautilus, Inc. For products purchased from a retailer, you may be asked to contact your retailer for warranty support.

Exclusions

The preceding warranties are the sole and exclusive express warranties made by Nautilus, Inc. They supersede any prior, contrary or additional representations, whether oral or written. No agent, representative, dealer, person or employee has the authority to alter or increase the obligations or limitations of this warranty. Any implied warranties, including the WARRANTY OF MERCHANTABILITY and any WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, are limited in duration to the term of the applicable express warranty provided above, whichever is longer. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

Limitation of Remedies

EXCEPT AS OTHERWISE REQUIRED BY APPLICABLE LAW, THE PURCHASER’S EXCLUSIVE REMEDY IS LIMITED TO REPAIR OR REPLACEMENT OF ANY COMPONENT DEEMED BY

NAUTILUS, INC. TO BE DEFECTIVE UNDER THE TERMS AND CONDITIONS STATED HEREIN. IN NO EVENT WILL NAUTILUS, INC. BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL,

INCIDENTAL, INDIRECT OR ECONOMIC DAMAGES, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING, WITHOUT LIMITATION, PRODUCT LIABILITY, NEGLIGENCE OR OTHER

TORT) OR FOR ANY LOST REVENUE, PROFIT, DATA, PRIVACY OR FOR ANY PUNITIVE DAMAGES ARISING OUT OF OR RELATED TO THE USE OF THE FITNESS MACHINE EVEN IF

NAUTILUS, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THIS EXCLUSION AND LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL

PURPOSE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL OR INCIDENTAL TYPE DAMAGES SO THE ABOVE LIMITATION MAY NOT APPLY TO

YOU.

State Laws

This warranty gives you specific legal rights. You may also have other rights, which vary from state to state.

Expirations

If the warranty has expired, Nautilus, Inc. may assist with replacements or repairs to parts and labor, but there will be a charge for these services. Contact a Nautilus® office for information on post-warranty parts and services. Nautilus® does not guarantee availability of spare parts after expiration of warranty period.

International Purchases

If you purchased your machine outside of the United States consult your local distributor or dealer for warranty coverage.

27

Nautilus

®

8000171.072312.B

Bowflex

®

Schwinn

®

fitness Universal

®