Sharp LC-60LE650U User's Manual

MANUAL DE OPERACIÓN
SHARP CORPORATION
ENGLISH
FRANÇAIS
MODE D'EMPLOI
Sharp Plaza, Mahwah, New Jersey 07495-1163
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
LC-80LE650U
LC-70LE650U
LC-60LE650U
LC-70C7500U
LC-60C7500U
LC-80C6500U
LC-70C6500U
LC-60C6500U
ESPAÑOL
OPERATION MANUAL
SHARP ELECTRONICS CORPORATION
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA DE
CRISTAL LÍQUIDO
LC-80LE857U
LC-70LE857U
LC-60LE857U
LC-80LE757U
LC-70LE757U
LC-60LE757U
LC-70LE755U
LC-60LE755U
LC-80LE657U
LC-70LE657U
LC-60LE657U
IMPORTANT
: Please read this operation manual before
starting operating the equipment.
IMPORTANT : Veuillez lire ce mode d’emploi avant de
commencer à utiliser l’appareil.
IMPORTANTE : Lea este manual de operación antes de
comenzar a operar el equipo.
Printed in Mexico
Imprimé au Mexique
Impreso en México
TINS-F700WJN1
13P03-MX-NM
LC-80LE857U_757U_657U_hyo1-4.indd 1
(for the LE857U, LE757U,
LE755U and 657U models)
2012/12/26 15:49:56
Dimensional Drawings
LC-70LE657U/LC-70LE650U/LC-70C6500U
Unit: inch (mm)
Unité: pouce (mm)
Unidad: pulgada (mm)
1 13/16 (46)*2
62 39/64 (1590)
3
*
(83) 3
5 59/64
(150)
20 1/4 (514)
34 3/32
(865.62)*1
37 21/64 (948)
60 19/32 (1538.88)*1
38 19/64 (973)
9/32
14 11/64 (360)
7 31/64 (190)
25 13/64 (640)
17 49/64 (451)
5°
19 27/64 (493)
15 3/4 (400)
4 17/32 (115)
15 3/4 (400)
9 59/64 (252)
LC-80LE657U/LC-80LE650U/LC-80C6500U
5 1/8
(130)
8 15/32 (215)
7 9/16
(192)
AN-52AG4
LC-60LE657U/LC-60LE650U/LC-60C6500U
1 7/64 (28)*2
3 1/32 (77)*3
54 19/64 (1379)
Skype™ is supported by this TV set. For details, refer to the following:
• http://www.sharpusa.com (for the operation manual)
• http://freetalk.me/product/sharp/ (for information on the communication camera)
• http://www.skype.com (for details on Skype)
Ce téléviseur est compatible avec Skype™. Pour les détails, reportez-vous à :
• http://www.sharpusa.com (pour le mode d’emploi)
• http://freetalk.me/product/sharp/ (pour des informations sur la caméra de communication)
• http://www.skype.com (pour les détails sur Skype)
Skype™ es compatible con este televisor. Para conocer más detalles, consulte:
• http://www.sharpusa.com (para el manual de operación)
• http://freetalk.me/product/sharp/ (para obtener más información sobre la cámara de comunicación)
• http://www.skype.com (para conocer detalles de Skype)
LC-80LE857U_757U_657U_hyo1-4.indd 2
9 1/16 (230)
5°
15 3/4 (400)
1/32
(26)
15 3/4 (400)
32 13/32 (823)
29 7/16
(747.60)*1
33 1/2 (851)
32 17/32 (826)
17 27/32 (453)
14 11/64 (360)
25 13/64 (640)
8 7/16 (214)
5 63/64 (152)
5 63/64
(152)
52 11/32 (1329.12)*1
4 13/16
(122)
6 15/16
(176)
AN-52AG4
*1 Active area/Área activa/Zone active
*2 Thinnest part/Parte más delgada/Partie la plus mince
*3 Including projecting parts/Incluyendo partes salientes/Parties saillantes incluses
2012/12/26 15:49:57
IMPORTANT INFORMATION
Model No.:
Serial No.:
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrow-head
symbol, within an equilateral
triangle, is intended to alert the
user to the presence of
uninsulated "dangerous voltage"
within the product's enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock
to persons.
The exclamation point within a
triangle is intended to alert the
user to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
product.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
WARNING: FCC Regulations state that any unauthorized changes or modifications to this
equipment not expressly approved by the manufacturer could void the user's authority
to operate this equipment.
CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to
connect the unit to other equipment. To prevent electromagnetic interference with electric
appliances such as radios and televisions, use shielded cables and connectors
for connections.
DECLARATION OF CONFORMITY:
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-80LE857U/LC-70LE857U/LC-60LE857U/
LC-80LE757U/LC-70LE757U/LC-60LE757U/LC-70LE755U/LC-60LE755U/LC-80LE657U/
LC-70LE657U/LC-60LE657U/LC-80LE650U/LC-70LE650U/LC-60LE650U/LC-70C7500U/
LC-60C7500U/LC-80C6500U/LC-70C6500U/LC-60C6500U
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
TEL: 1-800-BE-SHARP
For Business Customers: URL http://www.sharpusa.com
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
ENGLISH
IMPORTANT:
To aid reporting in case of loss or theft, please record the
TV's model and serial numbers in the space provided.
The numbers are located at the rear and left side of the TV.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Wireless Radio
For product available in the USA/Canada market, only channel 1–11 can be operated. Selection of
other channels is not possible. This device is going to be operated in 5.15–5.25GHz frequency range,
it is restricted in indoor environment only.
Important: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
Industry Canada Statement
This Class B digital apparatus complies with CAN ICES-003(B)/NMB-3(B)
Wireless Radio
For product available in the USA/Canada market, only channel 1–11 can be operated. Selection of
other channels is not possible.
The device could automatically discontinue transmission in case of absence of information to transmit,
or operational failure.
Note that this is not intended to prohibit transmission of control or signaling information or the use of
repetitive codes where required by the technology.
Important: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
IC Radiation Exposure Statement: This device complies with IC RSS-210 rules; Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept interference
recieved, including interference that may cause undesired operation.
This product contains a CR Coin Lithium Battery which contains Perchlorate Material – special
handling may apply, California residents,
U.S.A. ONLY
See www.dtsc.ca.gov/hazardouswaste/perchlorate/
"Note to CATV system installer: This reminder is provided to call the CATV system installer's attention
to Article 820 of the National Electrical Code that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical."
This product qualifies for ENERGY STAR when "Home" is selected for "TV Location".
Setting "TV Location" to "Home" allows the TV to achieve an energy-saving status for household use.
1
LC-80LE857U_757U_657U_E.indd 1
2012/12/21 16:45:23
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many
years of trouble-free operation of your product, please read the Important Safety Instructions
carefully before using this product.
IMPORTANT SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and
property damage if improperly handled. This product has been engineered and manufactured with
the highest priority on safety. However, improper use can result in electric shock and/or fire. In order
to prevent potential danger, please observe the following instructions when installing, operating
and cleaning the product. To ensure your safety and prolong the service life of your Liquid Crystal
Television, please read the following precautions carefully before using the product.
1)
2)
3)
4)
5)
6)
7)
8)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of
time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
Additional Safety Information
15) Power Sources—This product should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power supply to your home, consult your
product dealer or local power company. For products intended to operate from battery power, or
other sources, refer to the operating instructions.
16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles
as this can result in a risk of fire or electric shock.
17) Object and Liquid Entry—Never push objects of any kind into this product through openings as
they may touch dangerous voltage points or short-out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the product.
18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment
of other controls may result in damage and will often require extensive work by a qualified technician
to restore the product to its normal operation,
IMPORTANT SAFETY INSTRUCTIONS
e) If the product has been dropped or damaged in any way, and
f ) When the product exhibits a distinct change in performance - this indicates a need for
service.
19) Replacement Parts—When replacement parts are required, be sure the service technician has
used replacement parts specified by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
20) Safety Check—Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in proper operating
condition.
21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the
product according to the method recommended by the manufacturer.
• Outdoor Antenna Grounding — If an outside
antenna is connected to the television
equipment, be sure the antenna system is
grounded so as to provide some protection
against voltage surges and built-up static
charges.
Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and
supporting structure, grounding of the leadin wire to an antenna discharge unit, size of
grounding conductors, location of antennadischarge unit, connection to grounding
electrodes, and requirements for the
grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
ANTENNA LEAD
IN WIRE
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250)
NEC — NATIONAL ELECTRICAL CODE
• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an
unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the
product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with
the product. When mounting the product on a wall, be sure to follow the manufacturer's instructions. Use
only the mounting hardware recommended by the manufacturer.
• Selecting the location — Select a place with no direct sunlight and good ventilation.
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover
or block these vents and openings since insufficient ventilation can cause overheating and/or shorten
the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they
can block ventilation openings. This product is not designed for built-in installation; do not place the
product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the
manufacturer's instructions are followed.
• The front panel used in this product is made of glass. Therefore, it can break when the product is
dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the panel
breaks.
• Heat — The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that produce heat.
• The Liquid Crystal panel is a very high technology product with 2,073,600 pixels, giving you fine picture
details.Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green,
red or yellow (LE857U, LE757U, LE755U and C7500U models); blue, green or red (LE657U, LE650U and
C6500U models). Please note that this does not affect the performance of your product.
• Lightning — For added protection for this television equipment during a lightning storm, or when it is
left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the
antenna. This will prevent damage to the equipment due to lightning and power-line surges.
• Power Lines — An outside antenna system should not be located in the vicinity of overhead power
lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
2
LC-80LE857U_757U_657U_E.indd 2
2012/12/21 16:45:23
IMPORTANT SAFETY INSTRUCTIONS
•
•
•
•
To prevent fire, never place any type of candle or flames on the top or near the TV set.
To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
Do not display a still picture for a long time, as this could cause an afterimage to remain.
To prevent fire or shock hazard, do not expose this product to dripping or splashing.No
objects filled with liquids, such as vases, should be placed on the product.
• Do not insert foreign objects into the product. Inserting objects in the air vents or other
openings may result in fire or electric shock. Exercise special caution when using the
product around children.
Precautions when transporting the TV
• When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to
always carry the TV by two people holding it with two hands — one hand on each side of the TV.
Caring for the cabinet
• Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet.
• Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet
or cause cracking.
• Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.
• If the cabinet is very dirty, wipe with a soft cloth (cotton, flannel, etc.) soaked in neutral detergent diluted
with water and thoroughly wrung out, and then wipe with a soft dry cloth.
• Avoid using benzene, thinner, and other solvents, as these may deform the cabinet and cause the paint
to peel off.
• Do not apply insecticides or other volatile liquids.
Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time.
Plasticizers inside the plastic may cause the cabinet to deform and cause the paint to peel off.
Caring for the front panel
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.).
To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical
cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front
panel.
• Wiping with a hard cloth or using strong force may scratch the surface of the front
panel.
• Use a soft damp cloth to gently wipe the front panel when it is really dirty.(It may scratch the surface of
the front panel when wiped strongly.)
• If the front panel is dusty, use an anti-static brush, which is commercially available, to clean it.
• To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning
cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs.
Call 1-800-BE-SHARP for ordering, or VISIT http://www.sharpusa.com/SharpDirect.
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES
• Manufacturers, retailers and the rest of the consumer electronics industry are
committed to making home entertainment safe and enjoyable.
• As you enjoy your television, please note that all televisions – new and old- must
be supported on proper stands or installed according to the manufacturer’s
recommendations. Televisions that are inappropriately situated on dressers,
bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting
in injury.
TUNE IN TO SAFETY
• ALWAYS follow the manufacturer’s recommendations for the safe installation of
your television.
• ALWAYS read and follow all instructions for proper use of your television.
• NEVER allow children to climb on or play on the television or the furniture on
which the television is placed.
• NEVER place the television on furniture that can easily be used as steps, such
as a chest of drawers.
• ALWAYS install the television where it cannot be pushed, pulled over or
knocked down.
• ALWAYS route cords and cables connected to the television so that they
cannot be tripped over, pulled or grabbed.
WALL OR CEILING MOUNT YOUR TELEVISION
• ALWAYS contact your retailer about professional installation if you have any
doubts about your ability to safely mount your television.
• ALWAYS use a mount that has been recommended by the television
manufacturer and has a safety certification by an independent laboratory (such
as UL, CSA, ETL).
• ALWAYS follow all instructions supplied by the television and mount
manufacturers.
• ALWAYS make sure that the wall or ceiling where you are mounting the
television is appropriate.
Some mounts are not designed to be mounted to walls and ceilings with steel
studs or cinder block construction. If you are unsure, contact a professional
installer.
• Televisions can be heavy. A minimum of two people is required for a wall or
ceiling mount installation.
MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME
• Many new television buyers move their older CRT televisions into a secondary
room after the purchase of a flat-panel television. Special care should be made
in the placement of older CRT televisions.
• ALWAYS place your older CRT television on furniture that is sturdy and
appropriate for its size and weight.
• NEVER place your older CRT television on a dresser where children may be
tempted to use the drawers to climb.
• ALWAYS make sure your older CRT television does not hang over the edge of
your furniture.
CE.org/safety
3
LC-80LE857U_757U_657U_E.indd 3
2012/12/21 16:45:23
IMPORTANT SAFETY INSTRUCTIONS
3D Glasses (for the LE857U, LE757U, LE755U and LE657U models)
Prevention of accidental ingestion
• Keep the accessory out of the reach of small children. Small children can accidentally swallow these
parts.
– If a child accidentally swallows any of these parts, seek immediate medical attention.
Accessories
Supplied Accessories
Make sure the following accessories are provided with the product.
"AAA" size battery (x2)
Page 8
Page 8
Page 49
Stand unit (x1)
(for LC-80LE757U)
Stand unit (x1)
(for LC-70LE757U/LC-60LE757U/
LC-70LE755U/LC-60LE755U/LC70C7500U/LC-60C7500U)
Page 6
Page 50
Page 6
Stand unit (x1)
(for LC-80LE657U/LC-80LE650U/
LC-80C6500U)
Stand unit (x1)
(for LC-70LE657U/LC-60LE657U/
LC-70LE650U/LC-60LE650U/
LC-70C6500U/LC-60C6500U)
3D Glasses (x2)
(for the LE857U, LE757U, LE755U
and LE657U models)
Page 50
Page 7
For details, refer to the operation
manual.
Do not disassemble
• Do not disassemble or modify the 3D Glasses except when recycling the batteries. Do not modify the 3D
Glasses.
Handling the 3D Glasses
• Do not drop, exert pressure on, or step on the 3D Glasses. Doing so may damage the glass section,
which may result in the risk of injury.
• Be careful not to trap your finger in the hinge section of the 3D Glasses. Doing so may result in injury.
– Pay special attention when children are using this product.
Caution for lithium battery
• Batteries must not be exposed to excessive heat such as direct sunlight or fire.
• Replace only with the same or equivalent type of battery. The battery may explode if improperly replaced.
• Take care not to reverse the battery poles (+ and –) when loading the battery. Follow the correct
procedure when loading the battery. Loading the battery incorrectly may damage the battery or cause it
to leak battery fluid, which could result in a fire, injury or damage.
Using the 3D Glasses
• Use of the 3D Glasses should be limited to a maximum of 3 hours, and in any case no more than one
movie.
• Use only the 3D Glasses recommended for this TV.
• Use the 3D Glasses only for the specified purpose.
• Do not move around while wearing the 3D Glasses. The surrounding area may appear dark, which may
result in falling or other accidents that may cause injury.
Stand unit (x1)
(for LC-70LE857U/LC-60LE857U)
Caring for the 3D Glasses
• Use only the cloth provided with the 3D Glasses to clean the lenses. Remove dust and soil from the
cloth. Any dust or other soiling on the cloth may result in scratches. Do not use solvents such as
benzene or thinners as doing so may cause the coating to peel off.
• When cleaning the 3D Glasses, take care not to allow water or other fluids to come into contact with the
glasses.
• Always store the 3D Glasses in the case provided when not in use.
• When storing the 3D Glasses, avoid very humid or hot locations.
Viewing 3D images
• If you experience dizziness, nausea, or other discomfort while viewing 3D images, discontinue use and
rest your eyes.
• Do not use the 3D Glasses if they are cracked or broken.
Stand unit (x1)
(for LC-80LE857U)
Remote control unit (x1)
■ Operation manual (this publication)
■ Connection guide
■ Operation manual for the 3D Glasses (for the LE857U, LE757U, LE755U and LE657U models)
NOTE
WARNING
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD
“This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause
severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from
children. If the battery compartment does not close securely, stop using the product and keep it away
from children. If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.”
• Always use the AC cord supplied with the TV.
• The illustrations above are for explanation purposes and may vary slightly from the actual accessories.
Optional Accessories
The listed optional accessories are available for the
Liquid Crystal Television. Please purchase them at
your nearest shop.
• Additional optional accessories may be available in the
near future. When purchasing, please read the newest
catalogue for compatibility and check the availability.
Part name
Wall mount
bracket
3D Glasses
Model number
AN-52AG4
(for LC-70LE857U/LC-60LE857U/
LC-70LE757U/LC-60LE757U/
LC-70LE755U/LC-60LE755U/
LC-70LE657U/LC-60LE657U/
LC-70LE650U/LC-60LE650U/
LC-70C7500U/LC-60C7500U/
LC-70C6500U/LC-60C6500U)
AN-3DG40 (for the LE857U, LE757U,
LE755U and LE657U models)
4
LC-80LE857U_757U_657U_E.indd 4
2012/12/26 16:09:26
Contents
IMPORTANT INFORMATION . . . . . . . . . . . . . . . . . . . 1
DEAR SHARP CUSTOMER . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFETY INSTRUCTIONS . . . . . . 2-4
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . 4
Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . 4
QUICK REFERENCE
Attaching the Stand . . . . . . . . . . . . . . . . . . . . . . . 6-7
QUICK INSTALLATION TIPS . . . . . . . . . . . . . . . . 7
Experiencing HD Images . . . . . . . . . . . . . . . . . . . . 7
Installing Batteries in the Remote Control
Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Using the Remote Control Unit . . . . . . . . . . . . . . 8
Preparation
Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Part Names
TV (Front) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
TV (Side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
TV (Rear) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . 10
Introduction to Connections
Types of Connection . . . . . . . . . . . . . . . . . . . . . . . 11
Displaying an External Equipment Image . . . 11
Connecting to External Equipment
Connecting a Blu-ray Disc/DVD Player or
HD Cable/Satellite Set-top Box . . . . . . . . . . .
Connecting a VCR, Game Console,
Camcorder or Cable/Satellite Set-top Box. . .
Connecting a Surround System/
Audio System . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting a PC . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
12
13
13
Watching TV
Turning On/Off the Power . . . . . . . . . . . . . . . . . . 14
Initial Installation . . . . . . . . . . . . . . . . . . . . . . . . 14-15
Direct Button Operation
Changing Channels . . . . . . . . . . . . . . . . . . . . 16
Changing Volume . . . . . . . . . . . . . . . . . . . . . . 16
MUTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
FREEZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
INPUT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
FLASHBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SmartCentral . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
NETFLIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
AV MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Closed Captions and Digital Closed
Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
VIEW MODE . . . . . . . . . . . . . . . . . . . . . . . 18-19
On-Screen Display Menu
On-Screen Display Menu Operation . . . . . . . . 20
Menu Operation Buttons . . . . . . . . . . . . . . . . . . . 20
Menu Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . 22-23
Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Power Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
System Options . . . . . . . . . . . . . . . . . . . . . . . . 24-26
Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-28
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-30
Enjoying 3D Image Viewing (for the LE857U,
LE757U, LE755U and LE657U models)
Display Methods for 3D and 2D Images . . . . 31
Viewing 3D Images. . . . . . . . . . . . . . . . . . . . . 31-32
Configuring the TV Settings to Enhance
3D Image Viewing . . . . . . . . . . . . . . . . . . . . 32-33
Enjoying Photo/Music/Video Playback
Connecting a USB Memory Device/
USB Hard Drive . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Connecting a Home Network (DLNA) Server . . 34
Selecting the Folders to Play Back . . . . . . . . . 34
Playing Back Files on a USB Memory Device/
Home Network (DLNA) Server . . . . . . . . 35-37
Playing Back Files from a
Portable Device or PC . . . . . . . . . . . . . . . . . . . . 37
Using AQUOS LINK
Controlling HDMI Equipment
Using AQUOS LINK . . . . . . . . . . . . . . . . . . 39-40
Link Operation Menu . . . . . . . . . . . . . . . . . . . 40-41
Using a Smartphone with the TV . . . . . . . . . . . 41
Dimensional Drawings
• The dimensional drawings for the LCD TV set are
shown on the inside back cover.
Using a PC
Adjusting the PC Image . . . . . . . . . . . . . . . . . . . . 42
Setting Audio Input . . . . . . . . . . . . . . . . . . . . . . . . . 42
Control of the TV . . . . . . . . . . . . . . . . . . . . . . . 42-43
PC Compatibility Chart . . . . . . . . . . . . . . . . . . . . . 43
Using the Internet
Connecting to the Internet . . . . . . . . . . . . . . . . . . 44
Internet Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 44-45
AQUOS Advantage Live . . . . . . . . . . . . . . . . . . . . 45
Entering Text (Software Keyboard) . . . . . . . . . 45
Using the Browser . . . . . . . . . . . . . . . . . . . . . 46-47
Using Keyboard and Mouse . . . . . . . . . . . . . . . . 47
Using Applications via the Internet . . . . . . . . . . 47
DISCLAIMERS . . . . . . . . . . . . . . . . . . . . . . . . . 48
Appendix
Attaching the Stand (for the 80 Inch
Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49-50
Removing the Stand . . . . . . . . . . . . . . . . . . . . . . . 51
Setting the TV on the Wall . . . . . . . . . . . . . . 52-53
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Troubleshooting - 3D Images (for the LE857U,
LE757U, LE755U and LE657U models). . . 54
Troubleshooting - Error Message . . . . . . . . . . . 55
Information on the Software License for
This Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Specifications
TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56-57
Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Calling for Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Other Viewing Options
Presetting Remote Control Function . . . . . . . . 38
Operating the Connected Equipment . . . . . . . 39
• The illustrations and on-screen displays in this operation manual are for explanation purposes and may
vary slightly from the actual operations.
• The examples used throughout this manual are based on the LC-60LE650U model.
5
LC-80LE857U_757U_657U_E.indd 5
2012/12/26 16:09:26
QUICK REFERENCE
Attaching the Stand
• Before attaching (or detaching) the stand, unplug the AC cord.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from
being damaged.
CAUTION
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
NOTE
■ LC-70LE757U/LC-60LE757U/LC-70LE755U/
LC-60LE755U/LC-70C7500U/LC-60C7500U
1 Confirm that there are 12 screws (6 long screws,
4 middle screws and 2 short screws) supplied
with the stand unit.
2 1 Set the post for the stand unit onto the
polystyrene foam.
2 Attach the base to the post.
3 Insert and tighten the 6 screws into the 6
holes on the bottom of the base.
• Refer to pages 49 and 50 for the instructions on the installation of the 80 inch models.
■ LC-70LE857U/LC-60LE857U
1 Confirm that there are 9 screws (4 long screws,
4 middle screws and 1 short screw) supplied
with the stand unit.
2 Attach the supporting post for the stand unit
onto the base as shown below.
4
5
1 Insert the stand cover.
2 Insert the 2 screws to secure the stand cover.
Short screws
2
1
1
• Hold the stand unit securely with one hand,
and then tighten the screws.
Insert and tighten the 4 screws into the 4 holes
on the rear of the stand unit.
Long screws
3
Middle screws
2
• The supporting post attaches to the base at an
offcentered location on the base. Be sure to attach
the supporting post in the direction indicated
below and attach the stand to the TV with the
wider side of the base facing forward.
1
1
FRONT
Long screws
5
1 Insert the stand cover.
2 Insert the screw to secure the stand cover.
3
Insert the stand into the openings on the rear of
the TV.
• Make sure that the stand is firmly inserted into the
TV. Improper installation may result in tilting of the
TV set.
Short screw
Soft cushion
3
Insert the stand into the openings on the rear of
the TV.
• Make sure that the stand is firmly inserted into the TV.
Improper installation may result in tilting of the TV set.
Soft cushion
4
Insert and tighten the 4 screws into the 4 holes
on the rear of the stand unit.
Middle screws
6
LC-80LE857U_757U_657U_E.indd 6
2012/12/26 16:09:26
QUICK REFERENCE
■ LC-70LE657U/LC-60LE657U/LC-70LE650U/
LC-60LE650U/LC-70C6500U/LC-60C6500U
1 Confirm that there are 12 screws (8 long screws
and 4 short screws) supplied with the stand unit.
2 1 Set the post for the stand unit onto the
polystyrene foam.
2 Attach the base to the post.
3 Insert and tighten the 8 screws into the 8
holes on the bottom of the base.
• Hold the stand unit securely with one hand,
and then tighten the screws.
3
1 Insert the stand into the openings on the
bottom of the TV.
• Make sure that the stand is firmly inserted into
the TV. Improper installation may result in tilting
of the TV set.
2 Insert and tighten the 4 screws into the 4
holes on the rear of the TV.
Soft cushion
2
1
2
Attach your antenna to the back of the television.
(See page 8.)
Connect the AC plug for the television into the
AC outlet.
Remove and loosen
A
1
2
2
• Place the TV close to the AC outlet, and keep the
power plug within reach.
1
1
1
■ LC-80LE857U/LC-80LE757U/LC-80LE657U/
LC-80LE650U/LC-80C6500U
Short screws
B
2
■ LC-70LE657U/LC-70LE650U/LC-70C6500U
3
■ LC-70LE757U/LC-60LE757U/
LC-70LE755U/LC-60LE755U/
LC-70C7500U/LC-60C7500U
QUICK INSTALLATION TIPS
Long screws
Attach and bundle together
NOTE
• TO PREVENT RISK OF ELECTRIC SHOCK, DO
NOT TOUCH UN-INSULATED PARTS OF ANY
CABLES WITH THE AC CORD CONNECTED.
1
2
1
1
1
AC outlet
■ LC-70LE657U/LC-70LE650U/LC-70C6500U
FRONT
3
When turning on the TV for the first time, press
POWER on the television.
POWER
2
1
■ LC-60LE657U/LC-60LE650U/LC-60C6500U
3
1
Long screws
AC outlet
■ LC-60LE657U/LC-60LE650U/LC-60C6500U
2
1
1
1
1
4
2
FRONT
NOTE
AC outlet
Bundle the cords properly with the cable tie.
• When bundling the cords, use the AC cord holder
mounted on the TV. Relocate from A to B .
■ LC-70LE857U/LC-60LE857U
Remove and loosen
A
1
2
2
1
1
• In the installation procedure, be careful not to catch your fingers between the
TV set and the floor.
• Do not remove the stand from the TV unless using an optional wall
mount bracket to mount it.
• After attaching the stand to the TV, do not hold the stand when you
put up, set up, move or lay down the TV.
Insert the batteries into the remote control unit.
(See page 8.)
• Speakers cannot be detached from the TV.
• The TV angle cannot be adjusted.
Experiencing HD Images
An HDTV without an HD source is just an ordinary TV.
To enjoy HD images on the TV, you should get
HD programming from the following:
• Over-the-air broadcasting via HD quality antenna
• HD cable/satellite subscription
• HD compatible external equipment
1
NOTE
B
• For information on updating to HD programming, ask
your cable/satellite service provider.
Attach and bundle together
7
LC-80LE857U_757U_657U_E.indd 7
2012/12/21 16:45:23
Preparation
QUICK REFERENCE
Installing Batteries in the Remote
Control Unit
If the remote control fails to operate TV functions,
replace the batteries in the remote control unit.
1
Using the Remote Control Unit
Use the remote control unit by pointing it towards the
remote control sensor on the TV. Objects between
the remote control unit and the remote control
sensor may prevent proper operation.
Open the battery cover.
Antennas
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of
connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an
F-type connector, plug it into the antenna terminal at the rear of the TV set. For connecting the antenna cable to
the TV, use commercially available cables.
Connecting Antenna Cable
• Connect the antenna cable to the TV using one of the methods in the illustration as shown (1, 2, 3
or 4).
Remote control sensor
30°
17´ (5 m)
1 Cable without a
CATV converter
Home Antenna
terminal (75-ohm)
Cable TV lead-In
Coaxial cable
30°
30°
2
Insert two "AAA" size batteries (supplied with the
product).
* The angle is 7º when the
stand is attached.
■ Cautions regarding the remote control unit
• Place the batteries with their terminals
corresponding to the (e) and (f) indications in
the battery compartment.
3
Close the battery cover.
2 VHF/UHF antenna
Home Antenna
75-ohm coaxial cable (round) terminal (75-ohm)
30° *
• Do not expose the remote control unit to shock. In
addition, do not expose the remote control unit to
liquids, and do not place it in an area with high humidity.
• Do not install or place the remote control unit under
direct sunlight. The heat may cause deformation of the
remote control unit.
• The remote control unit may not work properly if
the remote control sensor on the TV is under direct
sunlight or strong lighting. In such cases, change the
angle of the lighting or the TV, or operate the remote
control unit closer to the remote control sensor.
Coaxial cable
3 Combination VHF/
UHF antenna
75-ohm coaxial cable (round)
300-ohm twin-lead
cable (flat)
4 Separate VHF/UHF
antenna
or
300/75-ohm
adapter
UHF
ANTENNA
300-ohm
VHF
twin-lead cable
ANTENNA
IN
300-ohm twin-lead cable
OUT
Combiner
To TV antenna
terminal
or 75-ohm coaxial cable
1. A 75-ohm system is generally a round cable with F-type connector
that can easily be attached to a terminal without tools.
2. A 300-ohm system is a flat "twin-lead" cable that can be attached
to a 75-ohm terminal through a 300/75-ohm adapter.
CAUTION
Improper use of batteries can result in chemical leakage
or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types
of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new
batteries can shorten the life of new batteries or cause
chemical leakage in old batteries.
• Remove batteries as soon as they are worn out.
Chemicals that leak from batteries that come in contact
with skin can cause a rash. If you find any chemical
leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a
shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an
extended period of time, remove batteries from it.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG
THE TELEVISION FROM THE OUTLET AND REPEAT
THE INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE
CONTACT US AT 1-800-BE-SHARP.
NOTICE
F-type connector should be finger-tightened only.
When connecting the RF cable to the TV set, do not tighten
F-type connector with tools.
If tools are used, it may cause damage to your TV set. (The
breaking of internal circuit, etc.)
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
F-type connector
75-ohm coaxial cable
8
LC-80LE857U_757U_657U_E.indd 8
2012/12/21 16:45:23
Part Names
TV (Front)
TV (Rear)
*1
RS-232C terminal
PC IN terminal
VIDEO IN 2 terminals
VIDEO IN 1 terminals
Center Icon
illumination
(See page 25.)
COMPONENT IN
terminals
*1
OPC sensor *
AUDIO OUT terminal
*1
Remote control sensor
USB 1 terminal *3
* OPC: Optical Picture Control (See page 22.)
HDMI IN 1 terminal
ARC: Audio Return Channel
(See pages 39 and 40.)
TV (Side)
HDMI IN 2 terminal
POWER
button
MENU
button
INPUT
button
Channel
buttons
(CHU/V)
Volume
buttons
(VOLk/l)
* See pages 11, 14, 20 and 25 for button operations.
USB 2
terminal *3
ETHERNET
terminal
Antenna/
Cable in
DIGITAL AUDIO
OUT terminal
AUDIO IN terminal
(shared for PC IN
and HDMI IN 2) *2
HDMI IN 3 terminal
HDMI IN 4 terminal
MHL: Mobile High-Definition Link
(See page 41.)
*1 See pages 11 to 13 and 39 for external equipment connection.
*2 See page 42 for details on the Audio Select function.
*3 Skype™ is available for the USB terminal. For details, refer to the following:
• http://www.sharpusa.com (for the operation manual)
• http://freetalk.me/product/sharp/ (for information on the communication camera)
• http://www.skype.com (for details on Skype)
9
LC-80LE857U_757U_657U_E.indd 9
2012/12/21 16:45:24
Part Names
1 POWER: Switch the TV power on or enter
standby. (See page 14.)
Remote Control Unit
18
19
1
2
3
20
21
4
5
2 TV, STB, DVD•VCR, AUDIO: Switches the
remote control for TV, STB, BD, DVD, VCR
and AUDIO operation. (See pages 38 to 39 for
details.)
* To enter the code registration mode, you
need to press an appropriate button (STB,
DVD•VCR or AUDIO) and DISPLAY at the
same time.
3 External equipment operational buttons:
Operate the external equipment.
4 OPTION: Display the Link Operation Menu
screen. This button will function only when
AQUOS LINK is used. (See pages 39 to 41 for
details.)
6
■ LE857U, LE757U,
LE755U and
LE657U models
22
8
9
10
11
12
23
24
25
26
27
28
29
30
15
13
16
17
21 AUDIO: Selects the MTS/SAP or the audio
mode during multichannel audio broadcasts. (See
page 17.)
22 ENT: Jumps to a channel after selecting with the
0–9 buttons.
23 FLASHBACK: Return to the previous channel or
external input mode. (See page 16.)
24 VIEW MODE: Select the screen size. (See pages
18 and 19.)
7 • (DOT): (See pages 16 and 39.)
26 CHU/V: Select the channel. (See page 16.)
8 CC: Display captions from a closed-caption
source. (See page 18.)
27 SmartCentral: Display the application window.
(See page 16.)
9 AV MODE: Select an audio or video setting. (See
page 17.)
28 RETURN: Return to the previous menu screen.
11 VOLk/l: Set the volume. (See page 16.)
12 MENU: Display the menu screen. (See page
20.)
14
■ LE650U, C7500U
and C6500U models
20 FREEZE: Set the still image. Press again to
return to normal screen. (See page 16.)
6 0–9: Set the channel. (See page 16.)
10 MUTE: Mute the sound. (See page 16.)
13
19 POWER (SOURCE): Turns the power of the
external equipment on and off.
25 INPUT: Select a TV input source. (TV, HDMI1,
HDMI2, HDMI3, HDMI4, COMPONENT, VIDEO1,
VIDEO2, PC IN, Home Network (DLNA), USB)
(See pages 11 and 16.)
5 SLEEP: Set the sleep timer. (See page 17.)
7
18 DISPLAY: Display the channel information.
29 NETFLIX: Display the Netflix screen. (See page
17.)
30 FAV APP 1, 2, 3: You can assign your favorite
applications to these buttons. (See pages 45 to
47.)
13 LE857U, LE757U, LE755U and LE657U
models
3D: Select between 3D and 2D image viewing.
(See pages 31 to 32 for details.)
LE650U, C7500U and C6500U models
AAL: Display the AQUOS ADVANTAGE LIVE
screen. (See page 45.)
14 a/b/c/d, ENTER: Select a desired item on
the screen.
15 EXIT: Turn off the menu screen.
16 FAVORITE CH: Set the favorite channels. (See
page 26.)
NOTE
• When using the remote control unit, point it at the TV.
17 A, B, C, D: Select 4 preset favorite channels in
4 different categories. (See page 26.)
While watching, you can toggle the selected
channels by pressing A, B, C and D.
10
LC-80LE857U_757U_657U_E.indd 10
2012/12/21 16:45:24
Introduction to Connections
Types of Connection
Displaying an External Equipment Image
For connecting the TV to external equipment, use commercially available cables.
To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV.
• The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.
■ Connecting to video equipment or PC
Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of
your external equipment and use its appropriate terminals for higher quality images.
Image
Quality
Terminal
on the TV
Cable
HD
Quality
Terminal on external
equipment
HDMI-certified cable
Pages
12, 13
INPUT
Ø 3.5 mm stereo minijack cable
AUDIO
DVI-HDMI conversion cable
Pages
12, 13
DVI OUT
Example
Component video cable
Input
Page 12
AIR
Audio cable
INPUT
AV cable
Standard
Quality
TV
Cable
1
Press INPUT.
2
Press a/b to select the input source.
• The INPUT list screen displays.
• You can also select the input source by pressing INPUT.
Each time INPUT is pressed, the input source toggles.
HDMI1
HDMI2
HDMI3
Page 12
■ Connecting to audio equipment
Terminal on the TV
Menu
HDMI1
Terminal on external
equipment
TV
HDMI4
• An image from the selected source automatically displays.
• If the corresponding input is not plugged in, you cannot
change the input. Be sure to connect the equipment
beforehand.
HDMI2
Optical fiber cable
OPTICAL
Page 13
HDMI3
DIGITAL AUDIO INPUT
Ø3.5 mm stereo minijack to RCA audio cable
Page 13
ANALOG AUDIO IN
11
LC-80LE857U_757U_657U_E.indd 11
2012/12/21 16:45:24
Connecting to External Equipment
You can connect many types of external equipment to your TV. To view external source images, select the
input source by pressing INPUT on the remote control unit or on the TV. (See pages 11 and 16.)
For connecting the TV to external equipment, use commercially available cables.
■ When using a Component cable (COMPONENT IN):
• Blu-ray disc player
• DVD player
• HD cable/satellite set-top box
CAUTION
• To protect equipment, always turn off the TV before connecting any external equipment.
• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
Audio cable
Connecting a Blu-ray Disc/DVD Player or HD Cable/Satellite Set-top Box
AUDIO-R (Red)
AUDIO-L (White)
■ When using an HDMI cable (HDMI IN 1, 2, 3 or 4):
• The HDMI (High Definition Multimedia Interface) terminal is an audio-video interface that enables a connection for
audio and video signals using a single cable. The HDMI IN terminal supports high-resolution video input.
COMPONENT OUT
• Blu-ray disc player
• DVD player
• HD cable/satellite set-top box
PR (Red)
Y (Green)
PB (Blue)
Component video cable
HDMI-certified cable
NOTE
• To enjoy 1080p display capability, connect your external equipment using an HDMI-certified cable or a component
cable and set the equipment to 1080p output.
Connecting a VCR, Game Console, Camcorder or Cable/Satellite Set-top Box
HDMI OUT
■ When using a Composite cable (VIDEO IN 1 or 2):
• Game console
• Camcorder
• VCR
• Cable/Satellite set-top box
NOTE
• To enjoy 1080p display capability, connect your external equipment using an HDMI-certified cable or a component
cable and set the equipment to 1080p output.
• Supported Audio format: Linear PCM, Dolby Digital, DTS, sampling rate 32/44.1/48kHz.
• When you connect ARC-compatible equipment, use HDMI IN 1.
VIDEO (Yellow)
AUDIO-L (White)
AV cable
AUDIO-R (Red)
■ When using a DVI-HDMI conversion cable (HDMI IN 2):
• Blu-ray disc player
• DVD player
• HD cable/satellite set-top box
DVI-HDMI conversion cable
Ø 3.5 mm stereo minijack cable
AUDIO OUT
DVI OUT
NOTE
• When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVI-HDMI conversion cable to the HDMI IN 2 terminal, connect a Ø 3.5 mm stereo minijack cable to
the AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". (See page 42.)
12
LC-80LE857U_757U_657U_E.indd 12
2012/12/21 16:45:24
Connecting to External Equipment
Connecting a Surround System/Audio System
Connecting a PC
■ When connecting an AV amplifier for a surround system
HD Cable/Satellite set-top box
Refer to page 43 for a list of PC signals compatible with the TV.
■ When using an HDMI cable (HDMI IN 1, 2, 3 or 4):
HDMI-certified cable
HDMI-certified cable *1
HDMI OUT
HDMI OUT
OPTICAL
DIGITAL AUDIO INPUT
HDMI OUT HDMI IN
NOTE
Optical fiber cable *2
• Letting the TV output the audio to an AV amplifier:
*1 When you connect ARC-compatible equipment, use the HDMI IN 1 terminal.
*2 If the equipment to be connected is not compatible with the ARC, connect an optical fiber cable.
• Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified
cable to the HDMI IN 2 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio
Select" to "HDMI+Analog". (See page 42.)
• The HDMI IN terminals only support digital signal.
■ When using a DVI-HDMI conversion cable (HDMI IN 2):
DVI-HDMI conversion cable
NOTE
• If the image is not in sync with the audio, check the settings of the connected surround system.
DVI OUT
■ When connecting an audio amplifier
It is possible to output audio through the DIGITAL AUDIO OUT terminal. (See page 24 for details.)
Ø 3.5 mm stereo minijack cable
AUDIO
Optical fiber cable
NOTE
OPTICAL
DIGITAL AUDIO INPUT
• When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVI-HDMI conversion cable to the HDMI IN 2 terminal, connect a Ø 3.5 mm stereo minijack cable to
the AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". (See page 42.)
■ When using an analog RGB cable (PC IN):
Ø3.5 mm stereo minijack to RCA audio cable
Analog RGB cable
(D-sub 15-pin cable or VGA cable)
Ø 3.5 mm stereo minijack cable
AUDIO
RGB
ANALOG AUDIO IN
NOTE
• See page 25 for details on the Output Select function.
NOTE
• When using an analog RGB cable, input the audio signal to the AUDIO IN terminal of PC IN.
• When connecting a PC to the PC IN, set "Audio Select" to "Video+Audio". (See page 42.)
13
LC-80LE857U_757U_657U_E.indd 13
2012/12/21 16:45:24
Watching TV
Turning On/Off the Power
3
Initial Installation
Press a/b to select the time zone where you
are using the TV, and then press ENTER.
When you turn on the TV for the first time, it will
automatically memorize the broadcasting channels
available in the region where you live. Perform the
following steps before you press POWER on the
remote control unit.
1. Insert the batteries into the remote control unit.
(See page 8.)
2. Connect the antenna cable to the TV. (See page 8.)
3. Plug in the AC cord to the AC outlet. (See page 7.)
POWER
Example
EST
Antenna & Cable/STB
Select the type of connection you will use to watch TV.
6 Press c/d to select "Antenna & Cable" or "Settop box", and then press ENTER.
CST
MST
PST
AKST
HAST
Antenna & Cable
• The time zone differs depending on the selected
country.
• The factory preset value is the time zone for the
capital of the selected country.
4
POWER (On/Standby)
Press a/b to select the Daylight Savings Time,
and then press ENTER.
Auto
Manual
Off
Press POWER on the TV or on the remote control
unit to turn the power on.
NOTE
• The Initial Installation starts when the TV powers on for
the first time. If the TV has been turned on before, the
Initial Installation will not be invoked. For changing the
settings of the Initial Installation, perform "EZ setup" on
the Initial Setup menu on page 26.
Language (Language setting)
Select from among 3 languages: English, French and
Spanish.
1 Press a/b to select the desired language listed
on the screen, and then press ENTER.
Language
Location & Time
TV Location
Español
CH Search
NOTE
• If you are not going to use this TV for a long period
of time, be sure to remove the AC cord from the AC
outlet.
• Weak electric power is still consumed even when the
TV is turned off.
Home
Store
Network
Completed
Press POWER on the TV or on the remote control
unit again to turn the power off.
• The TV enters standby and the image on the
screen disappears.
Select
Français
Air/Cable
Location & Time
Make settings for the country, area and time zone
where you use the TV.
2 Press a/b to select "United States", "Canada"
or "Mexico", and then press ENTER.
United States
Canada
Mexico
Set-top box
To watch TV via an antenna or cable connection
(without using a set-top box):
Select "Antenna & Cable", and then go to step 7.
To watch TV via a set-top box:
1Select "Set-top box", and then press ENTER.
2To watch TV, select the input source
corresponding to the terminal connected to the
set-top box. When doing so, you must make the
setting to skip "TV". Press c/d to select "On",
and then press ENTER.
• "Auto" is the default selection.
TV Location
Select "Home" or "Store" for the location where
you plan to install the TV. This product qualifies for
ENERGY STAR in Home mode default setting.
5 Press c/d to select "Home" or "Store".
Press ENTER to enter the setting.
English
Antenna & Cable/STB
NOTE
• ENERGY STAR qualification is based on AV MODE
"STANDARD (ENERGY STAR)".
Home: "Power Saving" is set to "Advanced", and AV
MODE is set to "STANDARD (ENERGY STAR)".
Store: "Power Saving" is set to "Off" and AV MODE
is set to "DYNAMIC (Fixed)". Picture Reset and
Feature Demo can be set.
Picture Reset: AV MODE will be set to
"DYNAMIC (Fixed)" regardless of whether
Picture Reset is "On" or "Off".
• If you select "On" and there is no operation
for 30 minutes:
- AV MODE will be reset to "DYNAMIC (Fixed)".
- When a 3D signal is detected, 3D images
will switch to 2D images. (For the LE857U,
LE757U, LE755U and LE657U models)
• When "Off" is selected:
- AV MODE will be set to "DYNAMIC (Fixed)".
Feature Demo: When "On" is selected, after all
the settings are completed, the Feature Demo
screen is displayed if there is no operation for
several minutes.
On
Off
• When this is set to "On", the channel on the TV
cannot be changed using the remote control
unit or menu. (e.g. CH U/V, Favorite CH,
etc.)
• See page 24 for details on the Input Skip
function.
3Press INPUT to select the input source
corresponding to the terminal connected to the
set-top box. Make the necessary settings on the
connected external equipment.
• See the operation manual of the connected
equipment for setting up the equipment.
Air/Cable (Antenna setting)
Make sure what kind of connection is made with
your TV when selecting "Air" or "Cable".
7 Press c/d to select "Air" or "Cable".
Press ENTER to enter the setting.
Air
Cable
14
LC-80LE857U_757U_657U_E.indd 14
2012/12/21 16:45:24
Watching TV
CH Search (Channel search)
Channel auto search makes the TV look for all
channels viewable in the set area.
8 When "Air" is selected in Antenna setting:
Press c/d to select "Start", and then press ENTER.
Start
Cancel
When "Cable" is selected in Antenna setting:
1Press a/b to select "Analog & Digital Search
Start" to search both analog and digital
broadcasts, or to select "Analog Search Start" to
search only analog broadcasts, and then press
ENTER.
Analog & Digital Search Start
Network
When you connect to the Internet on the TV, select
the desired connection method and follow the
instructions shown on the display.
• Wireless LAN connection is possible only when the
WPS (push button) method is used. If any other
method is used, make settings by Initial Setup >
Internet Setup > Network Setup. (See pages 44 to
45.)
9 Press c/d to select "Yes", and then press
ENTER.
Yes
Completed
11 The settings confirmation screen is displayed.
Confirm the information displayed on the screen,
and then press ENTER.
Language
Location & Time
TV Location
Antenna & Cable/STB
TV Input Skip
Network Connection
Examples of the settings confirmation screen
OK
Language
Location & Time
TV Location
Antenna & Cable/STB
Air/Cable
Search Result
No
Network Connection
: English
: United States/EST/Auto
: Home
: Antenna & Cable
: Air
: Digital 4ch
Analog 7ch
: Not completed
• Click "OK" to display the confirmation screen for
input source switching.
Please make sure to select INPUT to the
specific input terminal you are connecting
your set-top box to get the picture.
Closed caption, sub-channel audio
and channel selection need to be selected
with your set-top box.
Press the INPUT button,
then the right arrow d,
to see the list of channels found.
10 Press a/b to select "Wired" or "Wireless", and
then press ENTER.
If you select "Show the Input List", the connection
status of input source will be shown.
Please make sure the input position which your
set-top box is connected.
OK
Cancel
Wired
• The Channel search will start automatically.
• To exit the Channel search screen, select
"Cancel", and then press ENTER.
2The Channel search results may include
scrambled channels or channels that are not
viewable in the set area. Press c/d to select
"Yes", and then press ENTER to remove
scrambled channels.
No
Wireless
When no channel is received after "Antenna &
Cable" was selected in step 6 and a search was
carried out.
Language
Location & Time
TV Location
Antenna & Cable/STB
Air/Cable
Search Result
Network Connection
Connection using an ETHERNET cable:
1Select "Wired" and press ENTER.
2 Confirm that the TV is properly connected
with the router, and then press "Next". Follow
the instructions on the display to perform the
connection test.
Wireless LAN connection by the WPS method:
1 Select "Wireless" and press ENTER.
2 Follow the instructions on the display, and finalize
the connection after testing its viability.
: English
: United States/EST/Auto
: Home
: Antenna & Cable
: Cable
: No channel
: Not completed
Channel not found.
Antenna/Cable are not properly connected
or Air/Cable setup is incorrect.
Please check your Antenna/Cable connection
and Air/Cable setup.
Show the input list
OK
NOTE
• If no channel is found, confirm the type of connection
made with your TV and try "EZ Setup" again. (See
page 26.)
• To see the list of channels found during Channel
search, press INPUT, and then press d.
OK
Show the input list: You can check the current
connection status of external equipment. Confirm
which input terminal is connected to the set-top
box.
OK: Clicking "OK" will complete the EZ Setup
procedure.
NOTE
• When you change the network settings, refer to Initial
Setup > Internet Setup > Network Setup. (See pages
44 to 45.)
: English
: United States/EST/Auto
: Home
: Set-top box
: On
: OK
When one or more channel is received after
"Antenna & Cable" was selected in step 6 and a
search was carried out.
Analog Search Start
Yes
When "Set-top box" was selected in step 6.
HDMI 1
Not Available
HDMI 2
Connected
HDMI 3
Not Available
HDMI 4
Not Available
COMPONENT
Connected
VEDEO 1
Not Available
VEDEO 2
Connected
"Connected" is shown next to the name of input terminal which your
set-top box or any other external equipment are connected to.
OK
• This may not display correctly depending on the
connected equipment.
• This is not displayed correctly when the connected
equipment is off.
• To watch TV using a set-top box, press INPUT
after completing the initial settings, and select the
input to which the set-top box is connected.
NOTE
• For changing the settings of the Initial Installation,
perform "EZ setup" on the Initial Setup menu on page
26.
15
LC-80LE857U_757U_657U_E.indd 15
2012/12/21 16:45:24
Direct Button Operation
Changing Channels
MUTE
You can change channels in several ways.
Method 1
Using CHU/V on the remote control unit or on the
TV.
Method 2
Using remote control buttons 0-9, • (DOT).
Examples:
To select a 1 or 2-digit channel number (e. g.,
Channel 5):
Press 5
ENT.
To select a 3-digit channel number (e. g., Channel
115):
Press 1
1
5
ENT.
To select a 4-digit channel number (e. g., Channel
22.1):
Press 2
2
• (DOT)
1
ENT.
Method 3
Selecting the program from the Channel list.
1 Press INPUT on the remote control unit.
Press FLASHBACK to switch to the previously
tuned channel or previous input mode.
• " " will be displayed on the screen for 30 minutes,
and the sound is silenced.
• Press FLASHBACK again to switch back to the
currently tuned channel.
NOTE
NOTE
• Within 30 minutes of pressing MUTE, mute can be
canceled by pressing VOLk/l or MUTE.
• Mute will be canceled after 30 minutes have passed.
However, the TV will not suddenly output a loud sound
as the volume level is set to 0 automatically.
• FLASHBACK will not work if no channel has been
changed after the TV is turned on.
FREEZE
Allows you to capture and freeze a moving image
that you are watching.
Press FREEZE.
• A moving image is captured.
• Press FREEZE again to cancel the function.
• The INPUT list displays.
NOTE
2
Press c/d to select "AIR" or "CABLE".
3
Press a/b to select the desired channel, and
then press ENTER.
• When this function is not available, "No displaying still
image available." will display.
• The still image automatically goes out after 30 minutes.
• If you are using the freeze function and a broadcast
activates the V-CHIP BLOCK, the freeze function
will be canceled and a V-CHIP BLOCK message will
appear.
• You can have the same settings by choosing "Freeze"
on the menu items. (See page 24.)
• The Channel list displays.
NOTE
• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
• When you enter 0-9 only, channel selection will be
made if there is no operation within a few seconds.
• If you push "0" by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter 0-9 and • (DOT), channel selection will
be made if there is no operation within a few seconds.
Changing Volume
• To increase the volume, press VOLk.
• To decrease the volume, press VOLl.
30
Audio status
Speaker
INPUT
To view external source images, select the input
source by pressing INPUT on the remote control
unit or on the TV.
1 Press INPUT.
SmartCentral
Allows you to directly activate various types of
applications.
1 Press SmartCentral to display the application
window.
• Press SmartCentral again to display a list of
applications by category.
2
Press c/d(or a/b) to select the desired
application, and then press ENTER.
• If you changed the display to the list of
applications in step 1, select a category and then
an application. See page 47 for details.
• If "
" is displayed after you switch to USB mode,
check the USB connection.
• If "
" or "
" is displayed after you switch to
Home Network (DLNA) mode or after you connect
to the Internet, check your TV’s network settings
and connection.
NOTE
• See pages 34, 45 to 47 for details of viewable
applications.
• You can display the application window by choosing
"APPS" on the menu items. (See page 24.)
• When this function is not available, "Can not operate
this function now" will display.
• The INPUT list screen displays.
You can change the volume by pressing VOLk/l
on the TV or on the remote control unit.
Output device
FLASHBACK
Mutes the current sound output.
Press MUTE.
Output Select
Fixed
Variable
Variable sound
Mute
• When "Output Select" is set to "Variable", the indicator
on the screen changes as shown below.
2
Press a/b or press INPUT again to select the
input source.
• An image from the selected source automatically
displays.
• Each time INPUT is pressed, the input source
toggles.
• If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
NOTE
• See pages 11 to 13 and 39 for external equipment
connection.
100
NOTE
• See page 25 for details on the Output Select function.
16
LC-80LE857U_757U_657U_E.indd 16
2012/12/21 16:45:24
Direct Button Operation
■ Digital broadcasting audio mode
The types of audio transmitted in a digital broadcast
include SURROUND as well as MONO and STEREO.
In addition, it is possible for multiple audio tracks to
accompany a single video track.
NETFLIX
Displays the Netflix screen.
Press NETFLIX.
NOTE
• To enjoy Netflix, you need to make:
—a broadband Internet connection (See page 44.)
—settings of Internet Setup (See pages 44 to 45.)
—adjustments for Netflix (See page 47.)
Press ENTER to toggle between audio modes.
Example: when receiving Digital broadcasting
STEREO (Audio1)
STEREO (Audio2)
SURROUND (Audio3)
AUDIO
■ MTS/SAP stereo mode
The TV has a feature that allows reception of sound
other than the main audio for the program. This
feature is called Multi-channel Television Sound
(MTS). The TV with MTS can receive mono sound,
stereo sound
and Secondary Audio Programs (SAP). The SAP
feature allows a TV station to broadcast other
information, which could be audio in another
language or something completely different like
weather information.
You can enjoy Hi-Fi stereo sound or SAP
broadcasts where available.
• Stereo broadcasts: View programs like live sporting
events, shows and concerts in dynamic stereo sound.
• SAP broadcasts: Receive TV broadcasts in either
MAIN or SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language,
supplementary commentary or other information. (SAP
is mono sound.)
If stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to fixed
mono-sound mode.
You can change MTS as shown below to match the
television broadcast signal.
Press AUDIO to toggle between audio modes.
Examples: when receiving MTS and SAP
MONO
STEREO mode: STEREO
STEREO + SAP mode: ST(SAP) SAP(ST) MONO
MAIN + SAP mode: MAIN
MONO mode: MONO
NOTE
• MTS only operates while in TV mode.
• You can have the same settings by choosing "Change
Audio" on the menu items. (See page 24.)
Sleep Timer
• The remaining time displays when the sleep timer has
been set.
• Each time you press SLEEP, the remaining time
switches as shown below.
30
60
AV MODE gives you several viewing options
to choose from to best match the surrounding
environment of the TV, which can vary due to factors
like room brightness, type of program watched or
the type of device connected.
You can use USER Mode to create customized
settings for each TV input. These settings will be
automatically saved on each input for convenience.
Press AV MODE. Current AV MODE displays.
• Press AV MODE again before the mode displayed on
the screen disappears. The mode changes as shown
below:
• Example:
When using the COMPONENT IN,
VIDEO IN 1 or 2 terminals
■ LE857U, LE757U, LE755U and C7500U models
Allows you to set a time when the TV automatically
switches to standby.
Press SLEEP.
Off
AV MODE
90
AUTO
STANDARD (ENERGY STAR)
DYNAMIC (Fixed)
DYNAMIC
MOVIE
VINTAGE MOVIE
USER [TV]
GAME (Standard)
■ LE657U, LE650U and C6500U models
AUTO
STANDARD (ENERGY STAR)
MOVIE
120
DYNAMIC (Fixed)
• When set, the time automatically starts counting down.
• If you want to adjust the sleep timer, you can press
SLEEP twice then change the time setting.
• When it is 5 minutes before the time expires, the
remaining time will start to keep appearing every minute.
NOTE
• Select "Off" by pressing SLEEP to cancel the sleep timer.
• The TV will enter standby when the remaining time
reaches 0.
DYNAMIC
USER [TV]
GAME
• Example:
When using the PC IN or HDMI IN 1 to 4 terminals
■ LE857U, LE757U, LE755U and C7500U
models
AUTO
STANDARD (ENERGY STAR)
NOTE
MOVIE
DYNAMIC (Fixed)
VINTAGE MOVIE
DYNAMIC
GAME (Standard)
x.v.Color*
USER[
1
PC
]
*"x.v.Color" can only be selected when an x.v.Color
signal is input using HDMI IN 1 to 4 terminals.
■ LE657U, LE650U and C6500U models
AUTO
STANDARD (ENERGY STAR)
DYNAMIC (Fixed)
DYNAMIC
AUTO: Optimizes the image quality automatically
based on the room brightness and image signal.
STANDARD (ENERGY STAR): For a highly defined
image in a normal lighting.
MOVIE: For a movie.
VINTAGE MOVIE: Allows you to enjoy old-time films
in a good old-fashioned way, where the images
look as if they were projected in real time in those
days. (For the LE857U, LE757U, LE755U and
C7500U models)
GAME (Standard/High Motion): Suitable for game
playing. You can configure the settings according
to the type of the game. Refer to "Picture Setting"
> "Advanced" > "Game Type". (For the LE857U,
LE757U, LE755U and C7500U models) (See
page 22.)
GAME: Lowers image brightness for easier viewing.
(For the LE657U, LE650U and C6500U models)
PC: For PC.
USER: Allows the user to customize settings as desired.
You can set the mode for each input source.
x.v.Color: Supports the x.v.Color international
standard for wide color space. The x.v.Color
signal allows you to experience colors that
conventional color signals cannot reproduce.
(For the LE857U, LE757U, LE755U and C7500U
models)
DYNAMIC: For a clear-cut image emphasizing high
contrast, useful for sports viewing.
DYNAMIC (Fixed): Changes the image and
sound settings to the factory preset values. No
adjustments are allowed.
• You can select a different AV MODE item for each
input mode. (For example, select STANDARD (ENERGY
STAR) for TV input and DYNAMIC for COMPONENT.)
• When you play games, "GAME" is recommended for
AV MODE.
• You cannot set "GAME" or "PC" when the TV is
connected to the Internet or when the input source is
"Home Network (DLNA)" or "USB".
• You can have the same settings by choosing "AV
MODE" on the menu items. (See page 22.)
MOVIE
GAME
USER[
1
]
PC
SAP
17
LC-80LE857U_757U_657U_E.indd 17
2012/12/21 16:45:25
Direct Button Operation
Closed Captions and Digital Closed Captions
Your TV is equipped with an internal Closed Caption
decoder. It allows you to view conversations,
narration and sound effects as subtitles on your
TV. Closed Captions are available on some TV
programs and on some VHS home video tapes at
the discretion of the program provider.
• Depending on the number of caption services in the
signal being received, you will see information such as
1/2 or 1/4 displayed.
1/2 means "the first of two services".
Example:
If a program has three services (Digital CC(ENG), CC1
and Text1), the closed caption display will toggle in this
sequence:
1/3 ENG
Digital Closed Caption service is a new caption
service available only on digital TV programs
(also at the discretion of the service provider). It
is a more flexible system than the original Closed
Caption system, because it allows for a variety
of caption sizes and font styles. When the Digital
Closed Caption service is in use, it will be indicated
by the appearance of a 3-letter abbreviation that
also indicates the language of the Digital Closed
Captions: ENG (English), SPA (Spanish), FRA (French)
or other language codes.
Not all programs and VHS videotapes offer closed
captions. Please look for the "1" symbol to ensure
that captions will be shown.
In the Closed Caption system, there can be more
than one caption service provided. Each is identified
by its own number. The "CC1" and "CC2" services
display subtitles of TV programs superimposed over
the program’s picture.
In the Closed Caption system, the "Text1" or "Text2"
services display text that is unrelated to the program
being viewed (e.g., weather or news). These services
are also superimposed over the program currently
being viewed.
1 Press CC.
• This will present the Closed Caption information
display.
2
Press CC while the Closed Caption information
is still on the screen.
• Press repeatedly until you select the desired
closed caption service.
Air
DIGITAL
Audio
Video
CC
Ratings
22.1
:
:
:
:
STEREO
480p (4:3)
1/2 CC1
NONE
Closed Caption
information
2/3 CC1
3/3 Text1
VIEW MODE
You can select the screen size.
1 Press VIEW MODE.
• The View Mode menu displays.
• The menu lists the View Mode options selectable for the type of video signal currently being received.
2
Press VIEW MODE or a/b while the View Mode menu is displayed to select a desired item on the menu.
• You can sequentially select a View Mode that has its own aspect ratio.
Off
NOTE
• The CC button keeps a record of the last service
selected in its memory.
If the last closed caption mode (e.g. 1/3 ENG) you
selected is not available for the next program, or on
another channel, the closed caption service that is
available is automatically selected, and this service
appears in parentheses, e.g. "1/3(CC1)".
Closed Caption services that appear in parentheses will
not be stored in the CC button’s memory as your last
selected service. Only services that you have selected
with the CC button are stored.
Examples:
In a case where there are two closed caption
services provided (for instance, Digital CC(ENG)
and CC1), and Digital CC(ENG) is displayed as your
current selection, if Digital CC(ENG) is not broadcast
for the next program, the other closed caption
service, CC1, will be displayed in parentheses.
A closed caption service appears in parentheses
because the service you selected is not available
and a different service is displayed on your screen.
"1/1(CC1)" is displayed instead of "1/2/ENG".
• You can have the same settings by choosing "View Mode" on the menu items. (See page 24.)
• Each time you press VIEW MODE when a browser screen is shown, the display pattern toggles between a websiteonly screen and a TV+Web screen.
• You may not be able to change the View Mode while in 3D mode. (For the LE857U, LE757U, LE755U and LE657U
models)
■ For HD programs
Stretch
Dot by Dot (Full Screen)
S.Stretch (Smart stretch)
Zoom
Suitable for viewing widescreen 1.78:1 aspect ratio
program, stretch mode
will still show very thin
black bands at the top and
bottom of the screen.
Dot by Dot (1080i/
p only): Detects the
resolution of the signal and
displays an image with the
same number of pixels on
the screen.
Full Screen (720p
only): You can select
"Full Screen" only when
receiving a 720p signal.
Suitable for stretching 4:3
programs to fill the screen.
Suitable for viewing widescreen 2.35:1 aspect-ratio
programs in full screen.
NOTE
• When "Power Saving" is set to "Standard" or
"Advanced", the Power Saving leaf icon appears on
the channel information window. See page 24 for
details of Power Saving settings.
• See page 25 for detailed closed caption settings.
• When the program contains no closed caption, "--"
displays in the closed caption information.
• If the language code, e.g. "ENG", is not found on
Digital TV programs, "--" will be shown.
• Four kinds of closed caption service (CC1, CC2, Text1,
Text2) are potentially available, but a broadcast may
contain none or only some of these services at the
discretion of the program provider.
• When a web page is displayed, Closed Captions are
not available.
• You can have the same settings by choosing "Change
CC" on the menu items. (See page 24.)
NOTE
• When using Dot by Dot or Full Screen, it is possible to see noise or bars around different outer portions of the
screen. Please change view mode to correct this.
■ For 4:3 programs
Example: Screen size images
Side Bar
S.Stretch (Smart stretch)
Zoom
Stretch
Suitable for viewing
conventional 4:3 programs
in their normal format.
Suitable for stretching 4:3
programs to fill the screen.
Suitable for viewing widescreen 2.35:1 anamorphic
DVDs in full screen.
This mode is useful for
1.78:1 DVDs. When
viewing 1.85:1 DVDs,
stretch mode will still show
very thin black bands at
the top and bottom of the
screen.
18
LC-80LE857U_757U_657U_E.indd 18
2012/12/21 16:45:25
Direct Button Operation
■ For USB-Video, DLNA-Video or Internet applications
Example: Screen size images
Input signal
Auto
Original
Stretch
Keeps the original
aspect ratio in a
full screen display.
Displays an image
by an original size.
An image fully fills
the screen.
Zoom
Stretch
Dot by Dot
An image fully fills
the screen.
Detects the
resolution of
the signal and
displays an image
with the same
number of pixels
on the screen.
■ For PC
Example: Screen size images
Input signal
Normal
4:3
Keeps the original
aspect ratio in a
full screen display.
Input signal
Stretch
Dot by Dot
16:9
An image fully fills
the screen.
Detects the
resolution of
the signal and
displays an image
with the same
number of pixels
on the screen.
For viewing
widescreen
programs. The
top and bottom
of the image is
cropped.
NOTE
• Connect the PC before making adjustments. (See page 13.)
• Selectable screen size may vary with input signal type.
19
LC-80LE857U_757U_657U_E.indd 19
2012/12/21 16:45:25
On-Screen Display Menu
LCFONT embedded
System
Options
: Select
Initial
Setup
ENTER
: Enter
RETURN
Picture
Settings
Information
: Back
MENU
: Exit
Menu
On-Screen Display Menu Operation
Picture Settings
Example
AV MODE (Changing Pic.Quality)
System
Options
: Select
[STANDARD (ENERGY STAR)]
Initial
Setup
ENTER
: Enter
RETURN
Picture
Settings
Information
: Back
MENU
: Exit
Menu
Picture Settings
OPC
AV MODE (Changing Pic.Quality)
Backlight
[ b5] a16
Contrast
[b30]
0
Brightness
[
0] a30
Color
[ b2] a30
Tint
[
0] a30
Sharpness
[ b2] a10
[STANDARD (ENERGY STAR)]
OPC
b16
[On:Display]
Backlight
b40
[ b5] a16
Contrast
[b30]
b30
0
Brightness
[
b30
0] a30
Color
[ b2] a30
b30
Tint
[
b10
0] a30
Sharpness
[ b2] a10
Advanced
Advanced
Reset
Reset
b16
b40
b30
b30
b30
b10
1 Guide display
• This indicates the buttons that can be operated on the displayed screen. The guide display varies depending on
the menu setting screen.
• The operations for some selected items may be displayed in the operational guide bar at the bottom of the
screen.
1
2
• Additional related adjustment items may be displayed. Press a/b to select the desired item.
2 Item displayed in blue
3 Adjust the item while referring to the guide display.
• This indicates the item currently selected.
• Press ENTER to go to the adjustment screen for this item.
3 Item in brackets
• This indicates the current setting for the item.
4 Item displayed in white
• This indicates that the item can be selected.
5 Item displayed in gray
• This indicates that the item cannot be selected.
There are various reasons why the items cannot be selected, but the main reasons are as follows:
— Nothing is connected to the selected input terminal.
— The function is not compatible with the current input signal.
■ About Menu Items
Press MENU to display the MENU screen.
1 Press c/d to select the desired menu.
2 Press a/b to select a specific adjustment item, and then press ENTER.
• Operations vary depending on the function or item. Refer to the guide display corresponding to the menu
setting screen for button operations.
3
Press MENU to exit.
NOTE
• Menu options differ in the selected input modes, but the operating procedures are the same.
Menu Operation Buttons
Using the remote control
Use the following buttons on the remote control to
operate the menu.
• When AV MODE is set to "AUTO", part of the menu may not be displayed correctly or the setting range of the menu
may be changed.
• Some menu items may not be displayed depending on the selected input source.
Using the control panel of the TV
You can also operate the menu with the control
panel of the TV.
Button operations on the control panel correspond
to the ones on the remote control as shown below.
NOTE
• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
• The order of explanations for each menu item in the following pages is not necessarily in accordance with the
alignment of the items on the screen.
LCFONT:
• This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly
displaying easy-to-read characters on LCD screens.
MENU:
Press to open or close the menu screen.
a/b/c/d: Press to select a desired item on the
screen or adjust a selected item.
ENTER:
Press to go to the next step or
complete the setting.
RETURN: Press to return to the previous step.
MENU:
INPUT:
CHU/V:
VOLk/l:
MENU on the remote control.
ENTER on the remote control.
Cursor a/b on the remote control.
Cursor c/d on the remote control.
20
LC-80LE857U_757U_657U_E.indd 20
2012/12/21 16:45:25
On-Screen Display Menu
Audio Settings
Menu Items
Example
Picture Settings
Example
Picture
Settings
Menu
System Options
Menu
Audio
Settings
Audio Settings
Initial Setup
System
Options
Menu
Example
System Options
Auto Volume
Picture Settings
Example
Initial
Setup
Menu
Initial Setup
View Option
EZ Setup
AQUOS LINK Setup
Broadcasting Setup
Terminal Setting
Individual Setup
Internet Setup
Menu Design
Wall Mount Audio Setup
Operation Lock Out
Reset
[Off]
Treble
[ 0] a15
AV MODE (Changing Pic.Quality)
[STANDARD (ENERGY STAR)]
OPC
[ 0] a15
[On:Display]
Backlight
b5]
a16
[
Color
[ b2] a30
Tint
[
0] a30
Sharpness
[ b2] a10
b15
Bass
b15
Balance
[
b16
0]
L
R
Surround
[Off]
b30
Bass Enhancer
[On]
b30
Clear Voice
[Off]
b10
Reset
Advanced
[Off]
Icon Light Up Setting
[On]
Quick Start Mode
[On (Wallpaper Mode)]
Wallpaper Setting
Boot Picture
Reset
AV MODE
(Changing Pic.Quality).................... Pages 22 and 32
OPC ............................................................Page 22
Backlight .....................................................Page 22
3D Brightness Boost
(for the LE857U, LE757U
and LE755U models) ................................Page 32
Contrast ......................................................Page 22
Brightness ...................................................Page 22
Color ...........................................................Page 22
Tint ..............................................................Page 22
Sharpness ...................................................Page 22
Advanced .............................................Pages 22-23
C.M.S.-Hue .....................................Page 22
C.M.S.-Saturation ............................Page 22
C.M.S.-Value ...................................Page 22
Color Gamut Range
(for the LE857U, LE757U, LE755U
and C7500U models) ....................Page 22
Color Temp. ....................................Page 22
Motion Enhancement .......................Page 22
Game Type
(for the LE857U, LE757U, LE755U
and C7500U models) ....................Page 22
Shutter Effect
(for the LE857U, LE757U, LE755U
and C7500U models) ....................Page 23
Lamp Swing Effect
(for the LE857U, LE757U, LE755U
and C7500U models) ....................Page 23
Quad Pixel Plus 2
(for the LE857U
and LE757U, models) ...................Page 23
Active Contrast ................................Page 23
Gamma Adjustment .........................Page 23
Black Level ......................................Page 23
Film Mode ........................................Page 23
Digital Noise Reduction ....................Page 23
Monochrome ...................................Page 23
Range of OPC .................................Page 23
Reset...........................................................Page 22
[No]
Auto Volume ................................................Page 23
Treble ..........................................................Page 23
Bass ............................................................Page 23
Balance .......................................................Page 23
3D Surround
(for the LE857U, LE757U,
LE755U and LE657U models) ..................Page 23
Surround
(for the LE650U, C7500U
and C6500U models)................................Page 23
Bass Enhancer ............................................Page 23
Clear Voice
.......................................Page 23
Reset...........................................................Page 23
Power Control
Example
Menu
Power
Control
Power Control
Audio Only
Power Saving
[
Standard]
No Signal Off
[Enable]
No Operation Off
[Disable]
Audio Only ...................................................Page 24
Power Saving ..............................................Page 24
No Signal Off ...............................................Page 24
No Operation Off .........................................Page 24
[On]
View Option ......................................... Pages 24, 37
APPS ...............................................Page 24
USB Operation Panel .......................Page 37
Home Network (DLNA)
Operation Panel ...............................Page 37
View Mode.......................................Page 24
Freeze..............................................Page 24
Change Audio ..................................Page 24
Change CC ......................................Page 24
3D Setup
(for the LE857U, LE757U,
LE755U and LE657U models) ..................Page 32
AQUOS LINK Setup ....................................Page 40
Terminal Setting..............................Pages 24-25, 42
Audio Setup .....................................Page 24
PC input ..........................................Page 42
Audio Select ....................................Page 42
Input Skip ........................................Page 24
Input Label .......................................Page 25
HDMI Setup .....................................Page 25
Output Select...................................Page 25
Color System ...................................Page 25
Menu Design ...............................................Page 25
Channel Selecting Effect ..................Page 25
Program Title Display .......................Page 25
Position............................................Page 25
Caption Setup..................................Page 25
Game Play Time ..........................................Page 25
Operation Lock Out .....................................Page 25
Icon Light Up Setting ...................................Page 25
Quick Start Mode ........................................Page 25
Wallpaper Setting ........................................Page 25
Boot Picture ................................................Page 26
Response Tone
(for the LE857U, LE757U, LE755U
and C7500U models)................................Page 26
Demo Mode ................................................Page 26
EZ Setup .....................................................Page 26
Language.........................................Page 26
Location & Time ...............................Page 26
TV Location .....................................Page 26
Antenna & Cable/STB ......................Page 26
Air/Cable..........................................Page 26
CH Search .......................................Page 26
Network ...........................................Page 26
Completed .......................................Page 26
Broadcasting Setup .....................................Page 26
CH Setup.........................................Page 26
Favorite CH......................................Page 26
Antenna Setup-DIGITAL...................Page 26
Internet Setup ...........................Pages 37, 42, 44-45
Bluetooth Setup
(for the LE857U, LE757U,
LE755U and LE657U models) ..................Page 27
Language ....................................................Page 27
DivX® Setup .................................................Page 37
Individual Setup ....................................Pages 27-28
Secret No. ......................................Page 27
Parental CTRL ..........................Pages 27-28
Wall Mount Audio Setup ..............................Page 27
Reset...........................................................Page 27
Information
Example
Information
Menu
Information
Identification
Digital Caption Info.
Netflix Help
VUDU Help
Identification ................................................Page 28
Digital Caption Info. ....................................Page 28
Software Update ..................................Pages 28-30
Manual Update .........................Pages 29-30
Auto Update Setting ........................Page 28
Softwere License .........................................Page 52
Netflix Help ..................................................Page 47
VUDU Help ..................................................Page 47
21
LC-80LE857U_757U_657U_E.indd 21
2012/12/21 16:45:25
On-Screen Display Menu
OPC Setting
Picture Settings
Adjusts the picture to your preference with the
following picture settings.
NOTE
• For operating the on-screen display menu, see page 20.
Selected item
Backlight
Contrast
Brightness
Color
Tint
Sharpness
c button
The screen
dims
For less
contrast
For less
brightness
For less color
intensity
Skin tones
become
reddish
For less
sharpness
d button
The screen
brightens
For more
contrast
For more
brightness
For more color
intensity
Skin tones
become
greenish
For more
sharpness
Automatically adjusts the brightness of the screen.
Off: The brightness is fixed at the value set in
"Backlight".
On: Automatically adjusts.
On:Display: Displays the OPC effect on the screen
while adjusting the brightness of the screen.
NOTE
• When set to "On", the Optical Picture Control (OPC)
senses the surrounding light and automatically adjusts
the backlight brightness. Make sure nothing obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
• When set to "On:Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
OPC:
• You can select "3D Brightness Boost" while in 3D
mode. (For the LE857U, LE757U and LE755U models)
(See page 32.)
• For resetting all Picture adjustment items to the factory
preset values, press a/b to select "Reset", press
ENTER, press a/b to select "Yes", and then press
ENTER.
AV MODE (Changing Pic.Quality)
The audio and video settings can be changed to suit
the program or input content being watched.
NOTE
• The selectable items vary depending on the input
source and on the model of your TV.
• For details of the selectable items in 3D mode, see
page 32. (For the LE857U, LE757U, LE755U and
LE657U models)
• You can select AV MODE by pressing AV MODE on
the remote control unit. See page 17 for details of AV
MODE settings.
OPC:
Advanced Picture Settings
This TV provides various advanced functions for
optimizing the picture quality.
C.M.S.
(Color Management System)
Color tone is managed using the six-color adjustment
setting.
C.M.S.-Hue: This is a standard to adjust the color
either more reddish or more bluish in tone.
C.M.S.-Saturation: Increases or decreases the
saturation of a selected color.
C.M.S.-Value: A higher value makes the image
brighter.
A lower value makes the image darker.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select "Reset", and then press
ENTER.
Color Gamut Range
(for the LE857U, LE757U, LE755U and C7500U models)
You can set the color gamut range.
Standard: Standard color gamut.
Expanded: More vivid colors with expanded color
gamut.
NOTE
• "Color Gamut Range" is only available when AV MODE
is set to "MOVIE" or "MOVIE (3D)".
Color Temp. (Color Temperature)
For a better white balance, use color temperature
correction.
High:
Mid-High:
Middle:
Mid-Low:
Low:
White with bluish tone
Motion Enhancement
Use Motion Enhancement to view fast-action video
more clearly.
Selected item
AquoMotion960
AquoMotion480
240Hz
AquoMotion240
120Hz High
120Hz Low
Off
Description
Turn the LED backlight on or
off for 240Hz drive display.
For obtaining a clearer image.
Turn the LED backlight on or
off for 120Hz drive display.
For obtaining a clearer image.
Original image.
■ LE857 models
AquoMotion960/240Hz/AquoMotion240/120Hz
High/120Hz Low/Off
White with reddish tone
Low (Xenon), Low (Carbon arc): Available only
when AV MODE is set to "VINTAGE MOVIE"
MODE. Use one of these items to make picture
color become more reddish. (For the LE857U,
LE757U, LE755U and C7500U models)
White balance can be adjusted between a maximum of
+30 and a minimum of –30 for each color temperature.
R Gain (LO/HI)/G Gain (LO/HI)/B Gain (LO/HI)
■ Fine tuning the color temperature
To fine tune the color temperature, set "10 Point
Setting" to "On".
You can adjust the "Position" setting. Adjust the set
color temperature from +1 to +10.
White balance can be adjusted between a maximum
of +30 and a minimum of –30 for each color
temperature.
NOTE
• When "Position" is set to "10", you can adjust the white
balance between –30 and 0.
• For resetting all adjustment items to the factory preset
values, press a/b to select "Reset", and then press
ENTER.
■ LE757U models
AquoMotion480/AquoMotion240/120Hz
High/120Hz Low/Off
■ LE755U models
240Hz/AquoMotion240/120Hz High/120Hz Low/Off
■ C7500U models
AquoMotion480/AquoMotion240/120Hz
High/120Hz Low/Off
■ LE657U models
AquoMotion240/120Hz High/120Hz Low/Off
■ LE650U and C6500U models
120Hz High/120Hz Low/Off
NOTE
• "Motion Enhancement" may cause image noise. If this
occurs, turn the function "Off".
• When AV MODE is set to "VINTAGE MOVIE" MODE,
"GAME" or "PC", or PC format is being input, "Motion
Enhancement" is not available.
Game Type
(for the LE857U, LE757U, LE755U and C7500U models)
You can adjust picture quality according to the type
of the game you are playing.
Standard: Optimizes picture quality for standard
video games.
High Motion: Optimizes picture quality for high
motion video games.
NOTE
• "Game Type" is not available depending on the input
signal type.
22
LC-80LE857U_757U_657U_E.indd 22
2012/12/21 16:45:25
On-Screen Display Menu
Shutter Effect
(for the LE857U, LE757U, LE755U and C7500U models)
Available only when AV MODE is set to "VINTAGE
MOVIE" MODE. This function makes the images look
like they are flickering in the same way as old-time
films or TV were.
Lamp Swing Effect
(for the LE857U, LE757U, LE755U and C7500U models)
Available only when AV MODE is set to "VINTAGE
MOVIE" MODE. When this function