Sharp EL-6930 Owner's Manual

ELECTRONIC ORGANIZER
EL-6930
OPERATION MANUAL
NOTICE
• SHARP strongly recommends that separate
permanent written records be kept of all
important data. Data may be lost or altered in
virtually any electronic memory product under
certain circumstances. Therefore, SHARP
assumes no responsibility for data lost or
otherwise rendered unusable whether as a result
of improper use, repairs, defects, battery
replacement, use after the specified battery life
has expired, or any other cause.
• SHARP assumes no responsibility, directly or
indirectly, for financial losses or claims from third
persons resulting from the use of this product
and any of its functions, such as stolen credit
card numbers, loss or alteration of stored data,
etc.
• The information provided in this manual is
subject to change without notice.
Part Names
1
5. Setting daylight saving time
(DST: summer time)
Setting/Changing the daily alarm time
1. Press CLOCK once or twice to display Home
clock (with “ ”).
1. Press CLOCK once or twice to display Home
2. Press ALARM to
ALARM
or World clock.
display the daily
2. Press DST .
alarm screen.
A12–00
“#” is displayed. The time is set one hour
(The display differs
ahead. To clear DST, press DST to clear “#”.
between the 12-hour and 24-hour clock.)
The time is set one hour behind.
3. Press SHIFT SET .
Notes
4. Enter the time.
• DST can be set independently in either Home or 5. Press ENTER .
World clock.
• The daily alarm time is set.
• When DST is set for one world city, it is used
Turning the alarms on and off
for all cities displayed in World clock.
An alarm sounds only when the respective symbol
( , , or
) is turned on.
6. Setting alarms
Display Home clock (press CLOCK once or twice)
The Organizer has three kinds of alarms:
and press ALARM to display the daily alarm
1. Daily alarm ........ beeps every day at the alarm screen.
time (for one minute), when Each time you press ALARM while the daily alarm
“ ” is turned on.
screen is displayed, the combination of symbols
2. Hourly alarm ...... beeps every hour when
switches.
minutes reach “00”, when
Note
“ ” is turned on.
• Alarms sound even when the Organizer is
3. Schedule alarm .. beeps at the time for all the
turned off.
schedule entries (for one
minute), when “
” is
turned on. (Refer to
“Schedule Mode”.)
Press any key to stop the alarm beeping.
2
3
4
6
Telephone Mode
5
q
w
e
r
t
y
• Orange colored functions are operated by
pressing SHIFT (“SHIFT” is turned on) and the
appropriate keys.
• In this manual, only the display symbols
necessary for explanation of this product are
shown.
Power ON/OFF key
Cursor keys
Search keys
Mode keys
RESET switch
TRANSLATOR key
The following notations are used for
key operations.
➝ CM : Clear memory
(in Calculator mode)
➝ U : Letter “U”
➝
SHIFT
➝
V
: Turn the touch tone on
and off
: Letter “V”
Using the Organizer for the First Time
Be sure to perform the following operations
NOTES
• If the Organizer is subjected to strong,
before using the Organizer for the first time.
1. Remove the isolating film that is affixed to the
extraneous electrical noises or shocks during
battery holder on the back of the unit.
use, an abnormal condition may occur in which
OFF
no keys (including ON ) will respond. Press the
2. Press the RESET switch with a ball-point pen
or similar object.
RESET switch and press SHIFT ENTER to
“RESET?” is displayed.
delete all the memory contents.
3. Press SHIFT ENTER to initialize the Organizer. • To minimize battery consumption, the
After “RESET!” is displayed, Home clock is
Organizer is designed to automatically turn off
displayed. (See “Clock Mode”.) All memory
when no key has been pressed for
approximately seven minutes.
contents are deleted.
• The key touch tone is turned on and off by
pressing SHIFT
. When the tone is turned
on, “ ” will appear.
Changing the Guidance Language
Guidance messages can be displayed in seven
languages – English, German, Spanish, French,
Italian, Dutch, and Portuguese. After initializing
the Organizer, the default setting is English.
To change the language, press SHIFT LANGUAGE
PREV or NEXT
followed by
to select the
desired language, then press ENTER .
Telephone mode is composed of two directories
of storage memory. Pressing TEL toggles
between “1” and “2” on the display.
Use these files for convenience, e.g. business
and private files.
A telephone entry consists of name, address,
E-mail address, web address (URL) and number
fields.
Storing telephone entries
1. Press TEL once or
NAME?
twice to display the
Telephone mode
screen.
2. Enter the name, e.g. SMITH SPACE ROBERT,
and press ENTER .
3. Enter the address, e.g. 18 SPACE EAST
SPACE ROAD, and press ENTER .
4. Enter the E-mail
h a r ps e c . c o m _
address, e.g.
SROB SMBL
(to enter “ @ ”)
SHARPSEC.COM, and press ENTER .
• The E-mail address is automatically entered
in small letters.
5. Enter the web address (URL), e.g.
WWW.SHARPUSA.COM, and press ENTER .
Schedule mode is used for storing schedule
details (36 characters or under), date and time
(year, month, day, hour, and minute). In the first
line the same characters are allowable as in
Telephone mode.
Pressing SCHEDULE/MEMO toggles between
Schedule and Memo mode.
Entering symbols and letters with an accent
mark
• To enter a symbol, press SMBL repeatedly until
the desired symbol appears:
@#$£¥
( )~’: / \_&<>ß!? ¡¿æµ¢
• To enter a letter with an accent mark, press
SHIFT SHIFT to turn “SHIFT LOCK” on, and
press the appropriate key repeatedly. (Refer to
the “QUICK REFERENCE GUIDE” inside the
cover.)
• To turn “SHIFT LOCK” off, press SHIFT again.
Making corrections
Move the cursor to the character to be corrected.
Enter the correct character to replace the previous
one.
Cursor
The cursor (_) indicates the position for entering a
character. Move the cursor with the cursor keys
(
).
Inserting characters
Each time INS is pressed, a space is inserted at
the cursor position to allow you to enter a
character.
Deleting characters
Press DEL to delete the character at the cursor
position.
Press C•CE to clear all the characters that you
have entered and not stored yet.
The 1st line:
Name, address,
E-mail address
and web address
(URL)
Allowable
Number of
characters
characters
36 characters Alphabetic letters,
or under
numbers, symbols,
“+ – × ÷ .”, space
The second and
the third lines:
Phone number
Numbers, space, –,
F (Fax), P (Pager)
Notes
• The symbol “NAME”, “ADDRESS”, “E-mail”, or
“URL” is turned on while entering in each field.
• To skip entry of an address, E-mail address,
web address (URL), or number, press ENTER
when “ADDRESS?”, “E-MAIL?”, “URL?”, or
“NUMBER?” is displayed. However, entering a
person’s name cannot be skipped.
4. Press ENTER to store in the memory.
Notes
• Schedules for the following dates can be stored:
January 1901 to December 2098.
• If an attempt is made to store an entry without a
date or time, or with an invalid date or time,
“ERROR!” appears briefly. Enter the correct
date and time and press ENTER .
1. Storing schedule entries
SCHEDULE/MEMO
• Alphanumeric letters, symbols, and “+ – × ÷ .”
can be entered into the dot display area (the
first line).
• Numbers and some characters (only space,
–, and F and P in Telephone mode) can be
entered into the number display area (the
second and the third lines).
• Basically letters are entered in capital letters
(“CAPS” is turned on). To enter small letters,
press CAPS to turn “CAPS” off.
Field
Schedule Mode
1. Press
Entering Characters
6. Enter the phone
number, and then the NUMBER?
2–3456–7890
fax number if needed,
3456–7891_
e.g.
012-3456-7890
F SPACE SPACE SPACE 3456-7891, and
press ENTER .
• “STORED!” appears briefly, then the Telephone
mode screen is displayed. The telephone entry
is now stored.
SCHEDULE?
once or twice to
display the Schedule
mode screen.
2. Enter the details and press ENTER .
3. Enter the date and time.
• The types of date and time are the same as
the types set for the clock.
• To enter a single-digit date or time, enter “0”
and the digit (e.g. “O2”).
2. Alarm for Schedule mode
When the schedule alarm (“
”) is turned on, it
is set for all the schedule entries. Beeping sounds
for one minute when the time for a schedule entry
is reached. Press any key to stop the alarm. The
schedule alarm cannot be set for an individual
entry.
Memo Mode
Notes or other pieces of information that are not
2. Enter the memo item
UNION BANK
appropriate for Telephone or Schedule mode can
and numbers.
01
be entered for convenience.
E.g. UNION SPACE
272–0011223_
In the first line the same characters are allowable
BANK ENTER
as in Telephone mode. In the second and the third
01
lines you can enter numbers, –, and space. (36
272-0011223
characters or under can be entered in each line.)
3. Press ENTER to store in the memory.
Storing memo entries
1. Press
SCHEDULE/MEMO
MEMO?
once or twice to
display the Memo
mode screen.
Clock Mode
Home clock
Home city (with “
Date
Time
”)
Day of the week
NYC
SUN
1 – 1 – 2006
A12– 00– 00
Each time you press CLOCK , the clock switches
between Home and World clocks. (For World
clock, “ ” is not displayed.)
1. Before setting the clock
Notes
• To enter a single-digit date or time, enter “0”
and the digit (e.g. “02”).
• If you enter an invalid date or time, “ERROR!”
appears briefly. Enter the correct date and time
and press ENTER .
Zone
No.
0
1
2
3
3.3
4
5
6
6.3
7
7.3
8
8.3
9
9.3
Display
City
Zone
No.
TNG TONGA
10
WLG WELLINGTON 11
NOU NOUMEA
12
SYD SYDNEY
13
ADL ADELAIDE
14
TYO TOKYO
15
HKG HONG KONG
16
BKK BANGKOK
17
RGN YANGON
18
DAC DHAKA
19
DEL NEW DELHI
20
KHI KARACHI
21
KBL KABUL
22
DXB DUBAI
23
THR TEHRAN
24
Display
City
MOW
CAI
PAR
LON
AZ0
-2H
RIO
CCS
NYC
CHI
DEN
LAX
ANC
HNL
MID
MOSCOW
CAIRO
PARIS
LONDON
AZORES ISLANDS
2hrs behind LON
RIO DE JANEIRO
CARACAS
NEW YORK
CHICAGO
DENVER
LOS ANGELES
ANCHORAGE
HONOLULU
MIDWAY
• The default setting for the date is “MM/DD/
YYYY” (month-day-year). To change the setting
to “DD/MM/YYYY” (day-month-year) or “YYYY/
MM/DD” (year-month-day):
1. Press CLOCK once or twice to display the
Home clock (with “ ”).
2. Press DATE TYPE .
PREV or NEXT
3. Press
to select the
desired type.
4. Press ENTER to store the new setting.
3. Using World clock
• To change the 12-hour clock to the 24-hour
1. Press CLOCK once or twice to display World
clock, press 12 24 (“A” or “P” is cleared).
clock (without “ ”).
Each time you press 12 24 , the clock
PREV or NEXT
2. Press
to select the
switches.
desired city.
• In the period of daylight saving time/summer
time, press DST in advance (“#” is displayed).
Notes for storing and recalling entries
• When the memory is full, “MEMORY FULL!”
appears briefly, and the entry cannot be stored.
• When the symbol “ ” or “ ” is turned on,
more information exists. Press or
to
switch the display.
Checking details of entries in Telephone mode
• To display each field on the first line, follow the
symbol “ ” or “ ” and press or . (The
symbol above the first line shows each field.)
Recalling entries – Telephone, Schedule, Memo –
First press the desired mode key.
: Recalls entries in forward order
NEXT
PREV
: Recalls entries in reverse order
Sequential search
Press NEXT
or
PREV
1. Press CLOCK once or twice to display Home
clock (with “ ”).
2. Press SHIFT SET to start setting.
The cursor starts to flash on the city name.
PREV or NEXT
3. Press
to select the
desired time zone. (Refer to the list of cities
described below.)
• Enter the city name, if needed (six characters
or under). Only one changed name for Home
clock can be stored.
4. Press
to move the cursor to the month.
5. Enter the month, the day (two digits each), and
the year (four digits).
• The built-in calendar extends from January 1,
1901, to December 31, 2098.
6. Press AM/PM to select “A” (morning) or “P”
(afternoon) for the 12-hour clock.
7. Enter the time (hours and minutes).
Note: P12-00: noon, A12-00: midnight
8. Press ENTER . The clock starts from “00”
seconds.
You can change the home city for a city in another
time zone without adjusting the stored correct
time.
1. Press CLOCK once or twice to display World
clock (without “ ”).
PREV or NEXT
and select the
2. Press
desired city to be set as the new home city.
3. Press SHIFT SET to change the cities
between Home and World clocks.
• The previous home city is now set as the
world city (without “ ”).
4. Press CLOCK to check the home city.
• The selected city in step 2 is set as the home
city (with “ ”).
5. Press CLOCK to recheck the world city, and
PREV or NEXT
press
to select the new
world city, if needed.
Sorting order
• Telephone and memo entries are stored by the
first character of the person’s name or memo
item in the following order (case sensitive):
in each mode.
Direct search
• Enter the first characters (eight characters or
under) of the person’s name, schedule details,
or memo item, and press NEXT
or
PREV . Then press NEXT
PREV to
or
continue performing a direct search.
4. Changing the cities between Home
and World clocks
2. Setting the clock
• Pressing E-MAIL displays the E-mail address
on the first line directly.
Pressing E-MAIL ( WWW ) again displays the
web address (URL) on the first line. Each time
you press E-MAIL ( WWW ), the display
switches between the E-mail and the web
addresses.
• Press and hold
to start the auto scroll on the
first line. Press
again to stop or restart the
scroll. Press C•CE to quit the auto scroll.
• Schedule entries are stored by date and time.
Note
• When there is no (further or relevant) entry to
be recalled, “NOT FOUND!” appears briefly, and
the display returns to the mode screen.
Editing or deleting entries – Telephone, Schedule, Memo –
Editing
1. Recall the entry to be edited.
2. Press EDIT . The cursor starts to flash.
• In Telephone mode press ENTER several
times to display each field (the address field
and so on).
3. Press , , , or to move the cursor to
the position to be edited.
4. Enter, insert, or delete characters (refer to
“Entering Characters”).
• To cancel editing, press C•CE .
5. Press ENTER several times (until “STORED!”
appears briefly) to finish editing and to store
the entry.
Deleting
1. Recall the entry to be deleted.
2. Press DEL .
• “DELETE?” is displayed.
• To cancel the deletion operation, press
C•CE .
3. Press ENTER to delete the entry.
PRINTED IN CHINA
04MT (TINSE0808EHZZ)
EL6930(En).p65
1
04.12.6, 2:20 PM
Calculator Mode
The Organizer can
calculate numbers of up
to 10 digits. Press
CALC/CONV several
times to display the Calculator mode screen
(Calculator → Currency conversion → Unit
conversion → Calculator...).
Calculation examples
Example
0.
Calculation
Be sure to press C•CE , C•CE , and CM to clear
the display and memory before performing a
calculation.
Note
• When , , , or is pressed, the respective
symbol, +, –, ×, or ÷ is displayed. (In the
examples in this manual, these symbols are not
described.)
If an error occurs
If the calculation result or the integer section in
the numerical value in the memory exceeds 10
digits or if a number is divided by zero (0), an
error occurs (“ERR” is displayed).
(–24+2)÷4=–5.5
34+57=91
45+57=102
Operation
Display
24
C•CE
2
4
34 57
45
(The addend becomes a
constant.)
68×25=1700
68 25
68×40=2720
40
(The multiplicand becomes
a constant.)
200×10%=20
200 10 %
9÷36=25%
9 36 %
200+(200×10%)=220 200 10 %
500–(500×20%)=400 500 20 %
46=(43)2=4096
4
1/8=0.125
8
CM 25
25× 5=125
5 M+
–) 84÷ 3= 28
84
3 M–
+) 68+17= 85
68
17 M+
182
RM
앀앙앙
25–9=4
25
1234567890×145
=179012344050
1234567890
9
–5.5
91.
102.
1700.
2720.
20.
25.
220.
400.
4096.
0.125
M
125.
M
28.
M
85.
M
182.
앀앙
4.
145
C•CE
ERR
17.90123440
17.90123440
(17.90123440×1010=179012344000)
1. Setting a currency rate
2. Converting currency/unit
1. Press CALC/CONV
EURO
USD
several times to
display the currency
0.
conversion mode
screen (refer to “Calculator mode”).
Example: 1 CAD (Canada dollars)
= 0.66 USD (US dollars)
NEXT
NEXT
2. Press NEXT
to change
the display and press SHIFT SET . The initial
character of “CAD” starts to flash.
• You can change each currency name by
entering characters (up to four in each) and
using , if needed.
3. Press ENTER . “0” starts to flash.
4. Enter the rate (up to
CAD
USD
10 digits).
0.66
0.66
5. Press ENTER to
store in the memory.
You need to set the conversion rate before making
the currency conversion.
Example: Convert 500 CAD into USD using the
rate that you have set.
1. Display the screen: “CAD → USD”.
2. Enter the value to be converted.
500
3. Press to convert
CAD
USD
CAD into USD.
• To convert in
330.
reverse order (e.g.
200 USD into CAD), enter 200 and press .
• You can use the unit conversion in the same
manner. You cannot change the units or the
rates for units.
• The conversion result may have a slight error
as a result of rounding off the number (e.g. up
to two decimal places for currency
conversions). Use the conversion result for
reference.
Game Mode
ALPHA ATTACK
Type in characters (A to
ALPHA ATTACK
Z, 0 to 9) displayed on
the first line to clear
01
them. The game is
divided into 20 levels of speed.
Level
3.
4.
1. Press GAME to display the following Game
mode screen.
2. Enter the level
EY3KW
number (two digits
01
from 01 to 20).
• 01: slow, 20: fast
3. Press ENTER to start a game.
4. Press the same key as the first character on
5.
the left end of the first line. (In this case, press
keys in the order: E → Y → 3 → K → W.)
• Pressing the correct key in the correct order
deletes the character.
• When 12 characters are displayed in each
level, the game continues in the faster level
(up to 20).
• When no more characters can be displayed,
the game is over. The Game mode screen
with the level when the game is over is
6.
displayed.
BLACKJACK (Twenty-one)
Make your “hand” (the total of the numbers on
the cards) close to 21, without going over 21.
1. Press GAME to
BLACKJACK
display the following
Game mode screen.
30
2. Press ENTER to start
Your chips
a game. The left two
2. Turning Secret function on and off
When Secret function is on, “
” is not
displayed.
• You can display, edit, or delete entries
except secret entries.
• You can enter new entries as secret or
non-secret.
When Secret function is off, “
” is
displayed.
• You can display, edit, or delete secret
entries only. (You cannot display nonsecret entries.)
• You cannot enter a new entry.
Turning Secret function off
1. Press TEL or SCHEDULE/MEMO and check
” is not displayed.
that “
Currency/Unit Conversion Mode
Each time you press GAME , the display switches
between “ALPHA ATTACK” and “BLACKJACK”.
Storing secret entries
1. Enter characters in Telephone, Schedule, or
Memo mode when “
” is not displayed
(Secret function is on).
” is displayed, press SECRET
• When “
SECRET to turn Secret function on.
2. Press SECRET before pressing ENTER to
” appears.
store. “
3. Press ENTER to store a secret entry in the
memory.
• “STORED!” appears briefly, and the display
returns to the mode screen without “
”
(Secret function is on).
• You cannot display the secret entry until you
turn Secret function off.
cards are dealt for you. (One is faced up and
the other is faced down.)
Agree the left-displayed maximum bet (up to
10) or enter the fewer bet. You can also press
to bet the maximum.
Press SPACE to
Your hand The dealer’s
hand
see your hand.
Each time you
J28
4
press SPACE , a new
card is dealt.
10
20
• “J”, “Q”, and “K”
Your bet Your chips
are counted as 10.
• “A” can be counted as 1 or 11.
• When first two cards are “A” and a face card
(“J”, “Q”, or “K”), your hand is
“BLACKJACK”.
Press ENTER to
Your total The dealer’s
total
stop being dealt and
hold your hand. The
J28
32K4
dealer’s hand and the 20
19
20
20
results are displayed.
• When you win,
Your bet Your chips
your total flashes
and your bet is doubled.
• When you win with “BLACKJACK”, your bet
is tripled.
Press ENTER to display the Game mode
screen.
• When you have no more chips to bet, the
game is over.
• To quit the game, press C•CE or any mode
key. Your chips are stored for the next time.
• To return your chips to 30, press DEL and
ENTER on the Game mode screen.
Word Translation Function
• If there is no matching word, “NOT FOUND!”
is displayed. The word next in alphabetical
order will then be displayed.
PREV to scroll through
• Press NEXT
or
word list, or edit entry using the keyboard,
ENG
SPA
and press ENTER for another search.
• Press or
to return to the source word.
Caution
• Spanish words stored in this device are those
Press
twice (or
then ) to
of Spain.
enter Spanish ➝ English mode.
• Only the masculine form of the noun will be
2. Enter the desired source word and press
displayed for nouns with both masculine and
ENTER .
feminine forms.
“English…” or “Spanish…” is displayed while
• Two identical words may appear in the word
conducting search. The matching English or
list.
Spanish word will then be displayed.
• Enter European characters and spaces
• When the symbol “ ” is turned on, more
correctly. Otherwise, the unit may not be able
letters exist. To view remaining letters of long
to complete the search.
words that cannot be accommodated on the
screen, use to scroll right.
This device offers an English-Spanish bidirectional word translation function.
to enter the English ➝ Spanish
1. Press
translation mode.
2. Press SECRET . “PASSWORD?” is displayed.
3. Enter the password and press SECRET .
•“
” is displayed and you can display
secret entries.
• If you enter an incorrect password,
“ERROR!” appears briefly. Follow the above
steps and enter the correct password.
• Even when Secret function is turned off, it
will be automatically turned on (“
” will
disappear):
A)when you press GAME , CLOCK , or
CALC/CONV ,
or B)after the power is turned off manually
or automatically.
Turning Secret function on
1. Press TEL or SCHEDULE/MEMO and check
that “
” is displayed.
2. Press SECRET .
The password is displayed. Memorize it again.
3. Press SECRET again.
” disappears and you cannot display
“
secret entries.
3. Changing the password
1. Turn Secret function off (“
” appears).
2. Press SECRET . The password is displayed.
3. Press EDIT .
The initial character of the password starts to
flash.
4. Enter, or edit characters and make a new
password.
5. Press SECRET . The new password is now
registered.
Caring for Your Organizer
• Do not carry the Organizer in the back pocket of • Since this product is not waterproof, do not use
it or store it where fluids can splash onto it.
slacks or trousers.
• Do not drop the Organizer or apply excessive
• Clean only with a soft, dry cloth.
force to it.
• Use only a SHARP approved service facility.
• Do not subject the Organizer to extreme
temperatures.
Replacing Battery
Battery used
Type
Model
Quantity
Lithium battery
CR2032
1
• Improper replacement of the battery may
change or lose the memory contents.
• Be sure to write down any important
information stored in the memory before
replacing the battery.
• Make sure the power is turned off before
replacing the battery.
OFF
• Do not press ON until the battery replacement
procedure is completed.
• Do not use a metallic object to pry out the
battery. The Organizer will be subjected to an
electrical shock and all the memory contents
will be cleared.
• Make sure to confirm all settings are set
correctly after replacing the batteries.
OFF
1. Press ON to turn the power off.
2. Loosen the screw and remove the battery
holder cover on the back of the unit.
3. Remove the exhausted battery by prying it out
from the holder with the corner of the holder
cover. (Fig. 1)
When removing the
battery, use the corner
of the battery holder
cover.
1. Precautions
Since improper use of the battery may cause
leakage or explosion, strictly observe the
following instructions.
• Insert the battery with the positive side (+)
Fig. 1
correctly facing up.
• Never throw the battery into a fire because it
4. Install a new battery with the positive side (+)
might explode.
facing up into the holder.
• Keep the battery out of the reach of children.
5. Replace the holder cover and secure it with the
Because the battery in the Organizer was installed
screw.
at the factory, it may become depleted before the
OFF
6. Press ON to turn the power on.
specified expiration time is reached.
• If nothing appears on the display, press the
RESET switch and press C•CE .
2. Battery replacement
• Do not press SHIFT ENTER . Pressing
When “LOW BATTERY” is displayed, immediately
SHIFT ENTER clears all the memory
replace the battery with a new one. Continued use
contents.
of the Organizer with an exhausted battery can
7. Set the clock.
alter or clear the memory contents.
Specifications
• Model: EL-6930
• Game mode: 2 games
• Product name: Electronic Organizer
• Display: 3 lines of 12 digits
• Word Translation function:
Approx. 2,400 words
• Memory capacity: 192 KB Equivalent*
• Power consumption: 0.003 W
• Clock mode:
Accuracy: ± 60 seconds/month at 25°C/77°F
Display: Year, month, day, day of the
week, hour, minute, second, AM/PM
Clock function: 12-hour/24-hour format
(switchable), 3 kinds of date type
(switchable), world clock function, daylight
saving time (summer time) display, daily
alarm, hourly alarm
• Telephone mode: Entering and recalling of
telephone entry (name, address, E-mail
address, phone number, and web address
(URL))
• Schedule mode: Entering and recalling of
schedule entry (details, year, month, day, hour,
and minute), schedule alarm
• Memo mode: Entering and recalling of memo
entry
• Calculator mode: 10 digits (with calculation
status symbols), arithmetical calculations,
percentage, square root, memory calculation,
etc.
• Currency/unit conversion mode:
5 kinds of currency conversion (editable) and 9
kinds of unit conversion
• Operating temperature: 0°C to 40°C
(32°F to 104°F)
• Power supply: 3V … (DC), lithium battery
CR2032 × 1
• Auto-power off: Approx. 7 minutes
• Battery life: Approx. 2 years at ambient
temperature of 25°C/77°F, assuming the
following daily use: 30 minutes display, alarm
sounding for 20 seconds and key touch tone
turned on/off 100 times.
• Weight (including battery):
Approx. 88 g (0.19 lb.)
• Dimensions:
Open:
128.0 mm (W) × 167.1 mm (D) × 9.0 mm (H)
5-1/32" (W) × 6-19/32" (D) × 11/32" (H)
Closed:
128.0 mm (W) × 86.6 mm (D) × 12.7 mm (H)
5-1/32" (W) × 3-13/32" (D) × 1/2" (H)
• Accessories: 1 lithium battery (installed),
operation manual
* Memory at 192 KB Equivalent. Approx. 2,000
telephone names & numbers (name, telephone
and fax number are 14 characters and address
is 18 characters per entry) can be stored by
using compression technology. (Compression
Rate Approx. 1.5:1)
Memory Storage
1. Checking memory storage
2. Deleting all the memory contents
1. Press TEL or SCHEDULE/MEMO to display
“NAME?”, “SCHEDULE?”, or “MEMO?”.
2. Press SHIFT M•CK .
CAPA C I T Y
%
The remaining
memory space is
99
displayed briefly.
Notes
• Approx. 2,000 telephone entries can be stored
(when 14 characters are entered for name,
telephone and fax number fields, and 18
characters are entered for address field).
Perform steps 2 and 3 as described in the section,
“Using the Organizer for the First Time”.
• To cancel the deletion operation, press C•CE
instead of SHIFT ENTER in step 3.
LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original
container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or
part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of
which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered
or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES
INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET
FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration
of any warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser.
Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp
to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs
performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or
property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Secret Function
1. Registering a password and storing
secret entries
Up to six characters can be registered as the
password.
• One password is valid for Telephone, Schedule,
and Memo modes.
Registering a password
1. Press TEL or SCHEDULE/MEMO to display
“NAME?”, “SCHEDULE?”,
or “MEMO?”.
2. Press SECRET .
PASSWORD?
If the password is forgotten, you cannot delete the 3. Enter the password
(case sensitive), e.g. ABC.
password only. You have to delete all the memory
contents. (Perform steps 2 and 3 as described in 4. Press SECRET to register it.
• The display returns to the screen in step 1
the section, “Using the Organizer for the First
”.
with the symbol “
Time”.) As a safeguard, make a written record of
• If “ERROR!” appears briefly, a password has
the password.
already been registered. Enter the correct
password or delete the password and all the
memory contents.
5. Press SECRET SECRET to turn Secret
” disappears.
function on. “
EL6930(En).p65
2
Your Product :
Electronic Organizer
Warranty Period for this Product :
One (1) year parts and labor from date of purchase.
Additional Items Excluded from
Warranty Coverage :
Any consumable items such as paper, maintenance cartridge, ink cartridges supplied with the Product or
to any equipment or any hardware, software, firmware, fluorescent lamp, power cords, covers, rubber parts, or peripherals other than the Product.
Where to Obtain Service :
At a Sharp Authorized Servicer located in the United States. To find out the location of the nearest Sharp Authorized
Servicer, call Sharp toll free at 1-800-BE-SHARP.
What to do to Obtain Service :
Ship (prepaid) or carry in your Product to a Sharp Authorized Servicer. Be sure to have proof of purchase available. If
you ship or mail the Product, be sure it is packaged carefully.
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.
PRODUCT SUPPORT
If you have read the ORGANIZER operation manual,
but you still require product support, you can:
Call Sharp Customer Assistance Center
630-378-3590
(7am to 7pm CST M-F)
Visit our Web Site
www.sharpusa.com
Send an E-mail
pdasupport@sharpsec.com
Write to our Customer Assistance Center
SHARP Electronics Corp.
Customer Assistance Center
Att: WIZARD HELP
1300 Naperville Drive
Romeoville, IL 60446
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-1163
04.12.6, 2:20 PM
0123456789., 0123456789.,
0123456789., 0123456789.,