Model

5050N5051 Al5050AL

Serial

"C"

1 /2"

Pistol

Grip

Twin

Hammer

-

Imoact

Wrenches

Form #

Z356D

Operator Instructions Important

Read these instructions carefully before installing, operating,

Includes

-

Foreseen Use, Work Stations, Putting Into Service, servicing or repairing this tool. Keep these instructions in a safe

Operating, Dismantling, Assembly and Safety Rules. accessible place. f

Sioux Tools,

Inc.

17 Levi

Drive

Produd

Type

1/2" Pistol Grip Twin

Hammer Impact Wrenches

Model No/Nos Serial No.

Murphy, NC 28906

U.S.A.

Tel No. 828.835-9765 Fax No. 828-835-9685

5050A

Chrome

Nose

Case

5051 A

Black Nose Case

5050AL

2" Ext. Anvil

Product Net Weight

5050N5051 A 5050AL

5.60 5.80 Ibs

2.50 2.60 Kq

Recommended Use Of

Balancer Or Support

Recommended

Hose

Bore

Size

- Minimum

3/8ins 1 0 m m

Recommended Max.

Hose Length

3 0 F t 1 0 M

Air Pressure

Noise Level:

Sound

Pressure Level 89.0 dB{A)

Sound Power t-evet <tB{A)

Recommended Working 6.2 bar 90

Maximum

PSI

6.2 bar 90 PSI

Test Method: Tested in accordance with

Pneurop

test code PN8NTC1 and I S 0 Standard 3744

SAFETY MESSAGES

Peisonaf Safety Equipment

Use

-

Safety Glasses YES

Use

-

Safety Gloves

Use

-

Safety Boots

Use

-

Breathing Masks

Use

-

Ear Protectors YES

A

WARNING i

Always Read Instructions

~ e f o r e

-TOOIS @

NGw-v

Wear Hearing Protection

Vibration Level (5050A15051 A) 4.0 Meters 1 Sec2

(5050AL) 4.3 Meters I Sec2

Test Method: Tested

in accordance

I S 0 standards 8662 Parts 1 & 7

A

Amid Prolonged Exposure mmm

Safety rules

when

using 5050A,

5051A

and

5050AL Impact Wrenches

-

Use only impact sockets and extensions, universal joints, etc. rated as suitable far use with impact wrenches.

-

Prolonged exposure to vibration may cause injury.

-Read all instructions before using this toot. Ail operators must be fuHy trained in its use and

aware

of

- these safety rules.

Do exceed the maximum working air pressure.

-

Use personal protection equipment as recommended.

-

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains

away from the working attachment fixed to the tool.

-The tool is not electrically insulated. Never use the too) if there i s any chance of coming into contact with live chemicals known to cause cancer, birth defects and other reproductive harm.

-Use only compressed air at the recommended conditions.

-If appears to malfunction, remove from use immediately and arrange for service and is not ft! Pipa And Fittings swH bw electricity.

-Always when using the tool, adopt a firm footing and/or position and grip the tool sufficiently only to overcome any reaction forces that may result from the tool doing work.

Do not overgrip.

-Use only correct spare parts for maintenance and repair. Do not improvise or make temporary repairs. Major servicing and repairs should only be carried out by persons trained to do so.

-Do not lock, tape, wire, etc. the 'On/Off' valve in 'On'

position. The trigger/lwer, etc. must always be free to return to the 'Off' position when released. practical to remove too! from service, then shut off the air supply to the tool and write

OF have written a warning note and attach it to the toot.

-

If tool is to be used with a balancer or other suspension device, ensure that the tool is firmly attached to the suspensiodsupport device.

W h e n operating the tool, always keep the body and particularly the hands Recommended Air Supply System Figure 1

Page No 1