advertisement
Operator's Manual
®
SNOw Cab
Model No. 486.24278
STOP
DO NOT RETURN TO STORE
For Missing Parts or Assembly
Questions Call 1-866-576-8388
CaUTION:
Before using this product, read this manual and follow all Safety
Rules and Operating Instructions.
Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
www.sears.com/craftsman
PRINTED IN U.S.A.
• Safety
• Assembly
• Operation
• Maintenance
• Parts
FORM NO. 28119 (08/17/15)
SaFETY RULES
Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment.
Exercise caution at all times, when using power equipment.
• This cab provides foul weather protection only. It does not provide protection against exhaust fumes, collision, rollover or other accidents.
• Read the snow cab and vehicle owner's manuals and know how to operate your vehicle before using the snow cab attachment.
• Be sure there is adequate ventilation when using the tractor and snow cab in confined areas.
•
•
•
The snow cab will restrict your field of vision in some directions. Use extra caution when operating your tractor with the snow cab attached.
Watch out for low tree limbs or other overhead obstructions that may not previously have interfered with operation of the tractor. The extra height of the snow cab may cause these objects to become obstacles.
Check the area of operation thoroughly before using the tractor.
Look for this symbol to point out important safety precautions. It means — attention!! become alert!! Your safety is involved.
waRRaNTY
CRaFTSMaN LIMITED waRRaNTY
FOR ONE YEAR from the date of sale this product is warranted against defects in material or workmanship.
WITH PROOF OF SALE a defective part will be replaced free of charge. If a replacement part is unavailable, the product will be replaced with one of equal value.
For warranty coverage details to obtain free replacement, visit the web page: www.craftsman.com/warranty
This warranty does not cover expendable items that can wear out from normal use or deterioration within the warranty period, including but not limited to tires, belts, exterior fi nishes or product labels.
This warranty does not apply to a product that is damaged or altered through transportation, misuse, abuse, corrosion, accident, neglect modifi cation or mishandling.
This warranty is void if this product is ever used while providing commercial services or if rented to another person.
This warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state.
Sears brands Management Corporation, Hoffman Estates, IL 60179
DO NOT RETURN TO STORE for Missing Parts or Assembly Questions
Call 1-866-576-8388 Attachment Hotline
2
1.
2.
3.
Base Assembly
Weight Bracket
Drawbar Bracket
1
CaRTON CONTENTS
4. U-Tube
5. Upright Tubes (2)
6. Rope
4
5
7.
8.
9.
Support Rods (3)
Top Tubes (2)
Vinyl Canopy
6
7
8
9
2
3
A
REF QTY
A 1
DESCRIPTION
Hex Bolt, 5/8" x 1-3/4"
B
C
2
4
Carriage Bolt, 5/16 x 2"
Hex Bolt, 1/4 x 1-1/2"
D
E
F
8 Hex Bolt, 5/16" x 1"
2 Flat Washer, 5/16"
4 Nylock Nut, 1/4"
B
HaRDwaRE PaCKaGE
SHOWN FULL SIZE
C D
F
I
NOT SHOWN FULL SIZE
J
G
3
REF QTY
G 8
DESCRIPTION
Nylock Nut, 5/16"
H
I
1
4
Nylock Nut, 5/8"
Spiral Hook
J
K
2 Footrest Clamp
2 Plastic Knob
E
H
K
aSSEMbLY
LOCaTE MODEL LabEL OF TRaCTOR
• Look under your tractor seat and locate the serial number as shown. Refer to the chart below and check that your tractor is compatible.
®
STEP 1:
(SEE FIGURE 1)
• Assemble the drawbar bracket to the base assembly using four 5/16" x 1" hex bolts and 5/16" nylock nuts.
See figure 3. Do not tighten yet.
• Attach the weight bracket to the base assembly using four 5/16" x 1" hex bolts and 5/16" nylock nuts.
Note: The weight bracket holds up to three suitcase type weights to improve traction. Purchase weights separately.
WEIGHT BRACKET
MODEL
247. 000000
SERIAL
000000A000000
COMPaTIbLE MODEL NUMbERS
247.28906
247.28981
247.28980
247.28875
247.28672
247.20442
247.20444
247.20440
247.20443
247.20445
193653
BASE
ASSEMBLY
DRAWBAR
BRACKET
5/16" NYLOCK NUT
5/16" x 1"
HEX BOLT
FIGURE 1
TOOLS REQUIRED FOR aSSEMbLY
(2)
(2)
(1)
(2)
7/16" Wrenches
1/2" Wrenches
3/4" Wrench
15/16" Wrenches
REMOVaL OF PaRTS FROM TRaCTOR
• Remove any rear mounted attachments which may be installed on your tractor
• Mark and save all removed parts.
STEP 2:
(SEE FIGURE 2)
• Hook the base assembly under the shoulder bolts on the sides the tractor frame using the front notches in the base assembly. Align the hole in the bottom of the base assembly with the hole in the tractor drawbar.
Insert the 5/8" x 1-3/4" hex bolt and secure it with the
5/8" nylock nut.
Note: The seat may need to be tilted forward on some tractors to ease assembly.
5/8" x 1-3/4"
HEX BOLT
5/8" NYLOCK NUT
SHOULDER BOLT
4
FIGURE 2
STEP 3:
(SEE FIGURE 3)
• Assemble the upright tubes to the base assembly using two 5/16-18 x 2" carriage bolts (from outside) and two 5/16" flat washers and plastic knobs (from inside).
5/16" x 2"
CARRIAGE
BOLT
PLASTIC
KNOB
STEP 5:
(SEE FIGURE 5)
• Install a footrest clamp with preassembled bolt onto the front edge of each footrest, with the bolt underneath the footrest.
• Raise the tractor's hood. Place the snow cab canopy onto the tubing frame, draping the front flap down in front of the tractor's dash panel. Lower the hood, trapping the front flap under the hood. Secure the sides of the canopy by fastening the elastic hooks to the bottom edge of the footrest and fender. Levers or handles on snowthrowers and snow blades should be located outside of the cab.
5/16" FLAT
WASHER
FIGURE 3
RAISE HOOD
STEP 4:
(SEE FIGURE 4)
• Assemble the top tubes to the upright tubes using two 1/4" x 1-1/2" hex bolts (from outside) and two 1/4" nylock nuts (inside). Do not tighten yet.
• Fit the front U-tube onto the top tubes. Fasten the tubes together using two 1/4" x 1-1/2" hex bolts (on outside) and two 1/4" nylock nuts (on inside). Tighten
all loose bolts.
• Fit the three support rods into the holes in the top tubes, with the rods arching upward. Do not over bend the rods when installing.
1/4" x 1-1/2"
HEX BOLT
SUPPORT ROD
FIGURE 5
FRONT FLAP
ELASTIC HOOKS
FOOTREST CLAMP
1/4" NYLOCK
NUT
1/4" x 1-1/2"
HEX BOLT
FIGURE 4
1/4" NYLOCK
NUT
5
STEP 6:
(SEE FIGURE 6)
• Assemble two spiral hooks into holes on top of u-tube at front of tubing frame.
• Insert ends of rope down through spiral hooks attached to u-tube and then insert ends through two grommets in front of canopy.
FIGURE 6
ROPE
OPERaTION
Read this owner's manual and safety rules before operating your tractor with the Snow Cab.
CaUTION: watch out for low tree limbs and other overhead objects which may interfere with the snow cab.
CaUTION: This cab provides foul weather protection only. It does not provide protection against exhaust fumes, collision, rollover or other accidents.
CaUTION: Never transport the tractor in an open truck or open trailer while the snow cab is attached.
• Check the area of operation thoroughly before using the tractor with the snow cab. The added height of the snow cab and a reduced field of vision require extra caution during operation.
• Enter the snow cab on the left side at the rear.
Unfasten the elastic hook at the bottom and the velcro fastener in the top in the rear corner.
• Operate outside controls on a snowthrower or snow blade through the access flaps in the sides of the canopy.
• Up to three suitcase type weights can be added to the weight bracket on the snow cab to increase traction of the rear tires.
• Remove the upper snow cab frame and canopy before you transport the tractor in an open truck or open trailer.
STEP 7:
(SEE FIGURE 7)
• Insert one end of rope through a third spiral hook and tie a knot in end of rope.
• Assemble spiral hook with rope attached through hole in footrest clamp.
• Insert other end of rope through remaining spiral hook. Tie a knot in end of rope so that when hooked to other footrest clamp the rope is tight and canopy frame is stable.
ROPE
SPIRAL HOOK
FOOTREST CLAMP
FIGURE 7
MaINTENaNCE
6
• Before each use make a thorough visual check of the snow cab for any bolts and nuts which may have loosened. Retighten any loose bolts and nuts.
• The vinyl portion of the canopy can be washed using water only, or a mild liquid soap and water.
• The plastic windows should only be washed using running water, or a mild liquid soap and water. Wash the windows with your bare hands only. A cloth, sponge or brush will scratch the clear plastic.
IMPORTaNT: Never clean the windows when the plastic is dry. The clear plastic will scratch.
• Clean the vinyl canopy thoroughly and allow to dry before storing. Refer to the Cleaning section.
• Store the snow cab in a clean, dry area away from direct sun light.
16
6
17
REPaIR PaRTS ILLUSTRaTION
486.24278 SNOw Cab
To purchase repair parts, call 1-888-331-4569
3
5
3
4
17
11
12
2
2
8
10
9
1
15
17
17
18
13
18
13
19
8
9
10
11
5
6
7
REF PaRT NO QTY
1 64717 1
DESCRIPTION
Base Assembly
2 25014 2 Upright Tube
3
4
25013
25012
2 Top Tube
1 U-Tube
25015
48895
25141
43720
44977
43081
43648
3
1
1
Support Rod
Vinyl Canopy
Drawbar Bracket
2 Plastic Knob
2 Carriage Bolt, 5/16-18 x 2"
2 Flat Washer, 5/16"
4 Hex Bolt, 1/4-20 x 1-1/2"
21
20
20
19
7
7 14
16
17
18
19
20
21
REF PaRT NO QTY
12 47189 4
DESCRIPTION
Nylock Nut, 1/4-20
13 46703 2 Hex Bolt, 5/16-18 x 3/4" Self Thd.
14
15
41615
25703
1 Hex Nut, 5/8-11 Nylock
1 Weight Bracket
49017
49016
64802
47810
43063
47951
28119
1
4
2
Rope
Spiral Hook
Footrest Clamp
8 Nylock Nut 5/16-18
8 Hex Bolt, 5/16-18 x 1"
1 Hex Bolt, 5/8-11 x 1-3/4"
1 Owner's Manual
Product questions or problems?
1-888-331-4569
Customer Care Hot Line
Get answers to questions, troubleshoot problems, order parts, or schedule repair service.
Para respuestas a preguntas o problemas, y ordenar piezas o pedir servicio para la reparación de su equipo.
To help us help you, register your product at www.craftsman.com/registration
Para poderte ayudar mejor, registra tu producto en www.craftsman.com/registration
Join the Craftsman Club today!
Receive exclusive member benefits including special pricing and offers, project sharing, expert advice, and SHOP YOUR WAY REWARDS!
Como miembro exclusivo, recibe diversos beneficios como ofertas, precios especiales, proyectos nuevos, consejos de expertos y nuestro programa de puntos SHOP YOUR WAY REWARDS!
® Registered Trademark / TM
® Marca Registrada / TM
Trademark of KCD IP, LLC in the United States, or Sears Brands, LLC in other countries
Marca de Fábrica de KCD IP, LLC en Estados Unidos, o Sears Brands, LLC in otros países
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project