Soleus Air SG-WAC-10ESE-F Operating instructions


Add to my manuals
17 Pages

advertisement

Soleus Air SG-WAC-10ESE-F Operating instructions | Manualzz

Models

SG-WAC-10ESE-F

SG-WAC-12ESE-F

Electronic Window Air Conditioner

Operating Instructions

Thank you for choosing a Soleus Air powered by Gree Air Conditioner. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new air conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the store name/location, date purchased, and serial number below:

Store Name: ____________________________________________________

Location: ______________________________________________________

Date Purchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

IMPORTANT SAFETY INSTRUCTIONS

Before installing and using your air conditioner, please read this owner’s manual carefully. Store this manual in a safe place for future reference. Your safety and the safety of others is very important to us. Please pay attention to all safety messages outlined in this owner’s manual.

WARNING: To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow the following basic precautions:

• Plug into a grounded 3 prong outlet.

• Do not remove the ground prong.

• Do not use a plug adapter.

• Do not use an extension cord.

• Unplug the air conditioner before servicing

• Use two or more people to move and install the air conditioner

This is a safety alert symbol.

This symbol alerts you to potential hazards that can harm you or others or even cause death.

All safety messages will directly follow the safety alert symbol and/or the words

“DANGER” or “WARNING”.

Failure to immediately follow these instructions may cause serious injury or even death.

All Safety messages alert you of potential hazards, how to reduce the chance of injury, and what can happen if instructions are not followed correctly.

2

ELECTRICAL REQUIREMENTS

The electrical ratings for your air conditioner are listed on the model and serial number label located on the front left side of the unit (when facing the front).

Specific electrical requirements are listed in the chart below. Follow the requirements below for the type of plug on the power supply cord.

Wiring Requirements

115 volt (103.5 min.—126.5 max)

0-12 amps

15-amp time-delay fuse or circuit breaker

Use on single outlet circuit only

Power Supply Cord

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove the ground prong.

Do not use an adapter

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock

Recommended Ground Method

For your personal safety, this air conditioner must be grounded. This air conditioner is equipped with a 3 prong power supply cord with a grounded plug. To minimize the possibility of electrical shock, the cord must be plugged into a 3 prong outlet and grounded in accordance with all local codes and ordinances. If a 3 prong outlet is not available, it is the customer’s responsibility to have a properly grounded 3 prong outlet installed by a qualified electrician.

It is the customer’s responsibility:

• To contact a qualified electrician

• To assure that the electrical installation is adequate and in conformance with the National Electrical Code,

ANSI/NFPA 70 - latest edition, and all local codes and ordinances.

Copies of the standards listed may be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, Massachusetts 02269

LCDI Power Cord and Plug

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord that is required by UL. This power supply cord contains state-of-the-art electronics that sense leakage current. If the cord is damaged and leakage occurs, power will be disconnected from the unit.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test the plug:

1. Plug power cord into a grounded 3 prong outlet

2. Press RESET (on some units a green light will turn on).

3. Press the TEST Button, the circuit should trip and cut all power to the air conditioner (on some units a green light may turn off.

4. Press the RESET button for use. You will hear a click and the A/C is not ready for use.

NOTES :

• The RESET button must be engaged for proper use.

• The power supply cord must be replaced if it fails to trip when the TEST button is pressed and the unit fails to reset.

• Do not use the power supply cord as an ON/OFF switch. The power supply cord is designed as a protection device.

• A damaged power supply cord must be replaced with a new power supply cord from Soleus Air Powered by Gree.

• The power supply cord contains new user serviceable parts.

Opening the tamper-resistant case voids all warranty and performance claims.

NOTE: Your units power cord and plug may differ from the one shown.

3

PACKING LIST

Packing List:

• Window Air Conditioner

• Remote Control

• AAA Batteries (2)

• Top Mounting Rail

• Top Mounting Rail Seal Strip

• Lock Frame (2)

• Accordion Panels (Left & Right)

• Sash Lock (1)

• Window Sash Seal

• 3/4” Screw for Window Locking Bracket & Accordion

Panels, and sash lock (6)

• Foam Top Window Gasket

• Owner’s Manual

4

SPECIFICATIONS

• Noise level is measured at a distance of 3.28 ft away from the front of the unit in cooling mode.

• Power consumption is measured when the fan runs at the highest speed setting.

• These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.

Power Supply (Ph/V/Hz)

Rated Cooling Capacity (BTU/h)

Cooling Power Input (Watts)

Rated Current Cooling (Amperage)

Noise Level dBA (indoor/outdoor)

CFM H/M/L

Dehumidifying Capacity

Dimensions (W” x H” x D”)

Package Dimensions (W” x H” x D”)

Net/Gross Weight (Lbs)

Refrigerant Type

1/115/60

10,000

930

8.6

54/62

260/240/220

60 Pints per day

19 x 14.625 x 22.5

21.5 x 17.375 x 24.625

64/73

R-410A

1/115/60

12,000

1110

10.3

56/64

290/270/250

81.6 Pints per day

19 x 14.625 x 22.5

21.5 x 17.375 x 24.625

66/75

R-410A

DISCLAIMER

ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER’S MANUAL ARE THE

PRESENTATION OF THE MANUFACTURER. SOLEUS INTERNATIONAL HAS NOT CONDUCTED INDEPENDENT

TEST TO THE INFORMATION AND THE SPECIFICATIONS PRESENTED HEREWITHIN.

5

INSTALLATION & ASSEMBLY INSTRUCTIONS

Some assembly is required for your new air conditioner. Please read and follow these instructions carefully.

1. This air conditioner is designed to be installed in a standard double-hung window with a window width between 23” and 36” (584 mm - 914 mm).

2. The air conditioner can be installed without the accordion panels to fit in a narrow window opening.

See the window dimensions.

FIG. 1

3. The Lower Sash (the lower part of the window that moves up and down) must allow for 14.5” of vertical clearance when open. (See FIG. 1).

4. All supporting parts must be secured to firm wood, masonry, or metal.

5. The electrical outlet must be within reach of the power cord.

NOTE: Save the product packaging and installation instructions for future reference. Store the air conditioner in the product box when not in use for an extended period of time.

When handling the unit, be careful to avoid cuts from the sharp metal edges and aluminum fins on the front and rear coils.

TOP RAIL INSTALLATION

6

TOP RAIL INSTALLATION

NOTE: Top Rail and the side Sliding Panels are offset to provide the proper pitch to the rear of (5/16”). This I necessary for proper condensation utilization and drainage. If you are not using the side panels, the rear pitch must still be maintained.

1. Remove the backing from the top mounting rail seal strip and attach the seal strip to the bottom of the top rail. Align along the front edge.

2. Attach the top rail onto the top of the outer case using the four 2/5” screws.

7

ASSEMBLY & INSTALLATION (CONT.)

Accordion Panel Installation

Now that you have installed the top rail, you can now install the accordion panels on each side.

1. Place the air conditioner on a hard flat surface.

2. Locate the accordion panels in the box.

3. Gently pull the free end of the accordion panel (See

FIG. 2). Do this for both panels.

Placing the Unit Inside a Normal Window

1. Place the air conditioner on the sill with the bottom mounting rail against its back edge. Center the air conditioner and close the window securely behind the top mounting rail. The air conditioner should be slightly tilted to the outside area. Use a level; about a 1/3 bubble will be the correct case slant to the outside. (See

FIG. 5 & FIG. 6)

FIG. 2

FIG. 6

FIG. 5

4. Slide the free end of the accordion panel into the side panel of the air conditioner (See FIG. 3 & 3A). Do this for each side.

2. Once the air conditioner is placed, extend both the left and right accordion panels to the width of the window

SEE FIGURE 7).

FIG. 7

FIG. 3 FIG. 3A

5. Once the accordion panels are slid into place, make sure you leave enough space to slip on the top and bottom rails (See FIG. 4). Now, slide the top and bottom of the side panels inside top and bottom rails (See

FIG. 4A). Adjust the panels until they fit securely inside the rails

3. Place the frame lock between the frame extensions and the window sill as shown (FIG. 8). Drive

3/4” (19mm) locking screws through the frame lock and into the sill (FIG. 9). NOTE: To prevent window sill from splitting, drill 1/8” (3mm) pilot holes before driving screws.

FIG. 8

FIG. 4

FIG. 9

FIG. 4A

8

ASSEMBLY & INSTALLATION (CONT.)

4. Drive 4/5” screws into the top of the accordion panel frame and the top rail to securely attach the window air conditioner to the lower sash. (See FIG. 10 & 11)

5.

FIG. 10

FIG. 11

To secure the lower sash into place, use the sash lock and a 3/4” screw as shown below (See FIG. 12)

FIG. 12

IF AC is Blocked by a Storm Window

A storm window frame will not allow the air conditioner to tilt properly which in turn will keep it from draining properly.

To adjust for this, attach a board or piece of wood to the sill. The board or wood piece should have a depth of at least 1 1/2”. Make sure the board or piece of wood is approximately 1/2” higher than the storm window frame. This will allow the air conditioner to tilt enough for proper drainage. (See FIG. 12).

FIG. 12

STORM

WINDOW

FRAME

SASH

1 1/2” MIN

(38 mm)

Board or wood piece must be approximately

1/2” higher than the storm window frame for proper drainage

6. For added insulation, cut the supplied insulation foam to the width of the window. Insert the foam between the window sashes to prevent air and objects from getting into the room. (See FIG. 13)

FIG. 13

Removing the Air Conditioner from the

Window

1. Turn the air conditioner off, and disconnect the power cord.

2. Remove the sash seal from between windows, and unscrew sash lock.

3. Remove the screws installed through the frame and frame lock.

4. Close (slide) the side panels into frame.

5. Keeping a firm grip on air conditioner, raise the sash and carefully “rock” air conditioner backward to drain any condensate water in base of unit. Be careful not to spill any remaining water while lifting unit from window.

6. Store parts WITH the air conditioner in the box

9

USING YOUR AIR CONDITIONER

Electronic Control Panel & Remote Control

NOTE: This display always shows the room temperature except when setting the Set temperature or the Timer.

When the light is on the unit is in temperature or timer set mode.

Air Conditioner Controls

Normal Operating Sounds

• You may hear a pinging noise caused by water hitting the condenser, on rainy days, or when the humidity is high. This design feature helps remove moisture and improve efficiency.

• You may hear the thermostat click when the compressor cycles on and off.

• Water will collect in the base pan during rain or days of high humidity. The water may overflow and drip from the outside part of the unit.

• The fan may run even when the compressor is not on.

1. Power Button: Turns the air conditioner on and off

2. Digital Display: Displays the current room temperature or the amount of time left on the timer.

Shows the Set Temp when setting the temperature. Shows the Timer Set when setting the timer.

The once the timer and/or temperature are set, the display will change to show the current room temperature. To see the set temperature again, simply press either of the Temp/Delay ▲/▼ buttons.

3. Temperature Set: Use these buttons on the control panel and remote to increase or decrease the

Set Temperature (the desired room temperature) in cooling or energy saver mode. The SET light will light up when setting the temperature

4. Timer Set: Use these buttons on the control panel and remote to set the Timer. Each press of the Timer (DELAY) buttons will increase or decrease the timer. For timer instructions see #7.

5. Fan Speed & Auto Fan: Use the fan speed buttons to change the fan speed. Choose between low, medium, high, and Auto. When using the remote control, press the AUTO button to turn auto mode on and off and the FAN+ and FAN– buttons to select low, medium, or high fan speed.

6. Mode Button: Press the mode button to cycle through the various modes: Cooling, Energy

Saver, Fan only, and Dry (Dehumidifier).

7. Auto-on When the air conditioner is off, it can be set to automatically turn on in 1-24 hours at the previous set mode and fan setting. To set the Auto-on Timer, press the TIMER button on the unit or remote control. Each touch of the ▲/▼ on the unit or the +/- buttons on the remote will change the timer setting in 1 hour intervals. The

SET light will turn on while setting.

Auto-off Timer: When the air conditioner is on, it can be set to automatically turn off in 1-24 hours.

To se the Auto-off Timer, press the TIMER button on the unit or remote control. Each ouch of the ▲/

▼ on the unit or the +/- buttons on the remote will change the timer setting in 1 hour intervals. The

SET light will turn on while setting.

• To see the remaining time, press the TIMER

Button. To change the timer setting use the

▲/▼ on the unit or the +/- buttons on the remote.

8.

• To cancel the timer, press the TIMER button until the SET light turns off.

Filter Check: After the fan rotates for 250 total hours, the filter check light will turn on to remind the user to clean the filter. Press the Filter check button once the filter is cleaned to reset the reminder.

10

OPERATING YOUR AIR CONDITIONER

REMOTE CONTROL

1. ON/OFF - Press the ON/OFF button to turn the A/C on or off. When the unit is turned off, the Timer and sleep functions will be cancelled. The set temperature will be saved. the operating mode. You can choose AUTO,

COOL, SAVE (energy saver), FAN only, or

Dry (Dehumidifier). The temperature will not be displayed when AUTO mode is selected.

3. “—”- Press the “-” button to decrease the temperature when the unit is on. Press and hold the “-” button for more than 2 seconds to quickly cycle through the temperature options. Stop pressing the button when the desired temperature is displayed. The temperature cannot be set in auto mode. Temperature range: 61°F - 86°F.

4. “+” Press the “+” button to increase the temperature when the unit is on. Press and hold the “+” button for more than 2 seconds to quickly cycle through the temperature options. Stop pressing the button when the desired temperature is displayed. The temperature cannot be set in auto mode. Temperature range: 61°F - 86°F.

5. FAN - Press the FAN button to turn change the FAN options. You can choose between four speeds and auto mode. The fourth fan option is only available in cooling and energy saver modes. change the thermostat sensor from the air conditioner to the remote location. The air conditioner will cool the area depending on the location and set temperature of the remote control. Take the remote control with you so the air conditioner cools the room to your location. The Remote must be in line of site of the

A/C for iFeel to operate correctly.

7.

SLEEP MODE - Press the SLEEP button to turn SLEEP mode on or off. SLEEP mode is set to off automatically. When SLEEP mode is selected the timer can be adjusted. SLEEP mode is not available in Fan or Auto mode.

Sleep mode automatically reduces set temperature by 2°F after one hour and 4°F after two hours. This feature limits compressor usage and in turn enhances energy saving while you are sleeping.

8. TIMER - Press the TIMER button when the unit is off to set up the Auto-on timer. The Auto

-on time can be set between .5 - 24 hours. The icons “T-ON” and “H” will flash for 5 seconds.

Start selecting the time using the “+” and “-” buttons before the icons stop flashing. The time will increase/decrease in .5 hour increments with each press of the “+” or “-” buttons.

To cancel the Auto-on time, manually press the ON/OFF button to turn the unit on.

Press the TIMER button when the unit is on to set up the Auto-off timer.The Auto-off time can be set between .5 - 24 hours. The icons “T-

OFF” and “H” will flash for 5 seconds. Start selecting the time using the “+” and “-” buttons before the icons stop flashing. The time will increase/decrease in .5 hour increments with each press of the “+” or “-” buttons. To cancel the Auto-off time, manual press the ON/OFF button to turn the unit off.

Once the Auto-on or Auto-off time is set, the “T

-On” or “T-Off” and “H” will blink for 2 seconds.

After 2 seconds the set temperature will be displayed.

Battery Size: AAA - NOTE: Do not mix old and new batteries or different types of AAA batteries.

11

OPERATING YOUR AIR CONDITIONER

REMOTE CONTROL

9. LOCK/UNLOCK - Press the “+” and “—” buttons simultaneously to lock and unlock the remote control.

When the remote is locked, none of the functions or setting can be changed using the remote.

10. F° or C° - To switch between the F° or C° settings, press the MODE and “—” buttons a the same time.

11. DISPLAY LIGHTS- Hold the “+” and FAN buttons to turn the light s on the display ON or OFF. This can be done when the unit is on or off.

12. ENERGY SAVER MODE - When the unit is in energy saver mode, the Energy Saver light will turn on.

In Energy Saver mode, the unit will turn-off once the room is cooled to the user set temperature. The fan will also be off at this point. The unit will turn back on when the room temperature rises above the user set temperature.

13. AUTO MODE - The unit chooses between A/C, Dehumidifier, and fan mode based on the current room temperature.

Battery Size: AAA - NOTE: Do not mix old and new batteries or different types of AAA batteries.

12

USING YOUR AIR CONDITIONER

(Cont.)

Freezing Conditions:

This is a cooling only air conditioner. It is not designed for freezing outdoor conditions. It must not be used in freezing outdoor conditions.

• Remote Control: To ensure proper operation when using the remote control, aim the remote directly at the signal receiver on the air conditioner.

• The remote control has a signal range up to

20 feet.

• Make sure nothing is blocking the remote control signal from being received by the air conditioner.

• Make sure the batteries are installed correctly and still have power.

• Fan Only Mode: Use Fan Only mode at Low,

Med , or High fan speed to provide air circulation and filtering without cooling. Since fan only setting do not provide cooling, a Set temperature cannot be entered. The room temperature will appear in the display.

NOTE: Auto Fan Speed cannot be used in Fan

Only mode.

Loss of Power Protection: If power to the air conditioner is lost or interrupted, the air conditioner will automatically re-start in the setting last used prior to power loss. If the Timer was set to automatically turn the air conditioner off or on, it will resume countdown at the amount time left prior to power loss. You may need to set a new time if desired.

Cooling Mode: Use the COOL mode at Low, Medium, High, or Auto Fan speed when cooling is needed. Use the temperature ▲/▼ buttons to set the desired temperature between 64°F and 86°F.

• Air Direction: Use the lever on the front air vents to adjust the direction of the airflow. You can direct the airflow left, right, up or down. The lever is located on the right side of the air vent.

Once the temperature is set, the compressor will cycle on and off to keep the room temperature at the set temperature level. The lower the set thermostat temperature, the cooler the room will become. The higher the set thermostat temperature, the warmer the room will become.

For Normal Cooling - Set the Mode to Cool and the Fan to High or Med with the termperature set in the middle.

For Maximum Cooling - Set the Mode to Cool and the Fan to High with a lower set temperature.

For Quieter & Nighttime Cooling - Set the

Mode to Cool and the Fan to Low with the temperature set in the middle.

NOTE: If the air conditioner is off and is then turned on while set to a Cool setting or if turned from a fan setting to a Cool setting, it may take approximately 3 minutes for the compressor to start and cooling to begin.

• Energy Saver Mode - Controls the Fan

On

- The fan will cycle on and off with the compressor. This results in winder variations of room temperature and humidity. Normally used with the room is unoccupied. NOTE: The fan my continue to run for a short time after the compressor cycles off.

Off - The fan runs all the time in fan or cooling mode.

13

CARE AND CLEANING

Clean your air conditioner to keep it looking new and to minimize dust build up.

Air Filter Cleaning

The air filter should be checked at least once every month to see if it needs cleaning. Trapped particles and dust can build up in the filter and may decrease airflow as well as cause the cooling coils to accumulate frost. To clean the air filter:

1. Remove the filter by pulling down on the indents of the filter door on the front of the unit.

(See FIG. 13)

2. Wash the filter using liquid dish soap and warm water. Rinse the filter thoroughly. Gently shake the filter to remove excess water.

3. Let the filter dry completely before placing it into the air conditioner.

4. If you do not wish to wash the filter, you may vacuum the filter to remove the dust and other particles.

FIG. 13

Cabinet Cleaning

To clean the air conditioner cabinet:

• Unplug the air conditioner to prevent shock or a fire hazard. The cabinet and front panel of the air conditioner may be dusted with an oilfree cloth or washed with a cloth dampened in a solution of warm water and mild liquid soap.

Rinse thoroughly with a damp cloth and wipe dry.

• Never use harsh cleaners, wax or polish on the cabinet front.

• Be sure to wring excess water from the cloth before wiping around the controls. Excess water in or around the controls may cause damage to the air conditioner.

Winter Storage

To store the air conditioner when it is not in use for an extended period of time, remove it carefully from the window according to the installation instructions and cover it with plastic or place it in the original box

.

Wear and Tear

To minimize wear and tear on the air conditioner, always wait at least 3 minutes before changing modes. This will help prevent the compressor from overheating and the circuit breaker from tripping.

14

TROUBLESHOOTING

PROBLEM

The Air Conditioner will not start

POSSIBLE CAUSES

The air conditioner is unplugged

The fuse is blown/circuit breaker is tripped.

Power Failure

The current interrupter device is tripped.

SOLUTIONS

• Make sure the air conditioner is plug is pushed completely into the outlet

• Check the house fuse/circuit breaker box and replace the fuse or reset the breaker.

• The unit will automatically re-start when power is restored.

• There is a protective time delay

(approx. 3 minutes) to prevent tripping of the compressor overload. For this reason, the unit may not start normal cooling for 3 minutes after it is turned back on.

• Press the RESET button located on the power cord plug.

• If the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

The Air Conditioner does not cool as it should

Airflow is restricted

The temperature control may not be set correctly.

The air filter is dirty

The room may be too warm

Cold air is escaping

The Cooling Coils are frozen

• Make sure there are no curtains, blinds, or furniture blocking the front of the air conditioner

• Lower the set thermostat temperature

• Clean the filter. See the Cleaning and Care Section of the manual.

• Please allow time for the room to cool down after turning on the air conditioner.

• Check for open furnace registers and cold air returns

• See “Air Conditioner Freezing Up” below.

The Air Conditioner is freezing up

The Remote Control is not working

Ice blocks the air flow and stops the air conditioner from cooling the room

• Set the MODE dial to HIGH FAN or HIGH COOL and set the thermostat to a higher temperature

The batteries are inserted incorrectly

The batteries may be dead

• Check the position of the batteries.

• Replace the batteries

15

TROUBLESHOOTING (CONT.)

PROBLEM

Water is dripping outside

Water is dripping inside the room

Water collects in the base pan

POSSIBLE CAUSES

Hot and Humid weather.

The air conditioner is not correctly tilted outside.

Moisture removed from the air is draining into the base pan.

SOLUTIONS

• This is normal

• For proper water drainage, make sure the air conditioner is slightly tilted downward from the front of the unit to the rear.

• This is normal for a short period in areas with low humidity and normal for a longer period in areas with high humidity.

16

WARRANTY

One Year Limited Warranty

Soleus International, Inc. warrants the accompanying Soleus Air Powered by Gree Air Conditioner to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States.

If the unit exhibits a defect in normal use, Soleus International will, at its option, either repair or replace it, free of charge within a reasonable time after the unit is returned during the warranty period.

As a condition to any warranty service obligation, the consumer must present this Warranty Certificate along with a copy of the original purchase invoice.

THIS WARRANTY DOES NOT COVER:

Damage, accidental or otherwise, to the unit while in the possession of a consumer not caused by a defect in material or workmanship.

Damage caused by consumer misuse, tampering, or failure to follow the care and special handling provisions in the instructions.

Damage to the finish of the case, or other appearance parts caused by wear.

Damage caused by repairs or alterations of the unit by anyone other than those authorized by Soleus International Inc.

Freight and Insurance cost for the warranty service.

Filter and Accessories

ALL WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANT ABILITY ARE LIMITED TO

ONE-YEAR DURATION OF THIS EXPRESS LIMITED WARRANTY. SOLEUS INTERNATIONAL INC.

DISCLAIMS ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES AND IN NO EVENT

SHALL SOLEUS INTERNATIONAL INC’S LIABILITY EXCEED THE RETAIL VALUE OF THE UNIT FOR

BREACH OF ANY WRITTEN OR IMPLIED WARRANTY WITH RESPECT TO THIS UNIT.

This warranty covers only new products purchased from our authorized dealers or retailers. It does not cover used, salvaged, or refurbished products.

As some states do not allow the limitation or exclusion of incidental or consequential damages, or do not allow limitation on implied warranties, the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

For Technical Support and Warranty Service

Please Call (888) 876-5387

Or Write To:

Soleus International, Inc.

20035 E. Walnut Dr. N.

City of Industry, CA 91789 www.soleusair.com www.soleusgreen.com

17

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals