DVD Home Theatre
System
Operating
Instructions
U_H-O_F,._TmON
M_*LTma_D_A
_NTER_ACE
Twin
DEiVe
5ubwoolr:eE
DIGITAL
AUDIO
DA V-HDX5OO/HDX501W
02007 Sony Corporation
WARNING
To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
This equipment Ires been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
provide reasonable protection against harmAfl
interlk.rence in a residential installation. This
equipment
Caution - The use of optical instruments
with this product will increase eye
hazard.
Do not install the appliance in a confined
as a bookcase or built-in cabinet.
To prevent
fire or shock hazard,
filled with liquids,
space, such
do not place objects
such as vases, on Ihe apparatus.
Do not expose the battery to excessive
direct sunlight, fire, or the like.
For the customers
heat such as
generates,
uses, and can radiate
to
radio
ficquency energy and, if not inst dled and used in
accordance
with the instructions,
may cause harmful
interference to radio communications.
However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmlhl interference to radio or television receptiom
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
in the U.S.A
Reorient
or relocate
Increase
receiver.
the separation
the receiving
between
antenna
(aerial).
the equipment
and
Connect the equipment into an outlet on a circuit
diflk:rent from that to which the receiver is
connected.
Consult
the dealer
technician
or an experienced
radio_V
for help.
CAUTION
You m: cautioned
that any changes
or modifications
not expressly approved in this manual could void your
authority to operate this equipment.
This symbol
is intended
to alert the user to
the presence of uninsulated
"dangerous
voltage" within the product's enclosure
may be of sufficient magnitude
electric shock to persons.
This symbol
the presence
maintenance
accompanying
literature
Owtlel'L_
to constitute
Important
Read these instructions.
2)
Keep these instructions.
3)
Heed all warnings.
4)
Follow all instructions.
is intended to alert the user to
of important operating and
5)
Do not use this apparatus
6)
Clean
(servicing)
instructions
the appliance.
7)
Do not block any ventilation openings. Install in
accordance with the manufeJcturer's
instructions.
8)
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
in the
Recol'd
the space provided helow. Relk:r to them whenever you
call upon your Sony dealer regarding this product.
No. DAV-HDX5//0/DAV-HDX501W
Serial No.
Instructions
that
a risk of
The model and serial numbers are located at the rear
exterior of the control unit. Record the serial number in
Model
Safety
1)
(including
9)
near water.
only with dry cloth.
amplifiers)
that produce
Do not defeat the salk.ty purpose
heat.
of the polarized
or
grounding-type
plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outleL consult an electrician lk)r
replacement
10) Protect
of the obsolete
outlet.
the power cord from being walked
on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit fiom the
apparatus.
2 US
11) Only use attachments/accessories
manufacturer.
specified
by the
12) Use only with the cark stan& tripod, bracket,
On
or
combination
power
sources
• The unit is not disconnected
from the AC 12?O'_,r_'r
source (mains) as long as it is connected to the wall
outlet (mains), even if the unit itself has been turned
off.
table specified by the manufacturer,
or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus
avoid injury from tip-over.
Precautions
to
• Install this system so that the AC power cord (mains)
can be unplugged from the wall socket immediately
in the event of trouble.
13) Unplug
this apparatus
when unused
14) Refer all servicing
Servicing
during lightning
for long periods
to qualified
is required
storms or
of time.
service
personnel.
when the apparatus
has been
damaged in any way, such as power-supply
cord or
plug is damage& liquid has been spilled or objects
have fallen into the apparatus, Ihe apparatus has
been exposed to rain or moisture_ does not operate
normally, or has been dropped.
Note
to CATV
system
Thank you for purchasing
Sony DVD Home
Theatre System. Bet_)re operating this system,
please read this manual thoroughly and retain it
lor fitture reference.
installer:
This rcmiMcr is provided to call the CATV system
installer's
attention to Article g20-411 of the NEC that
provides guidelines
particular, specifies
%r proper grounding
that the cable ground
and, in
shall be
connected to the grounding system of the building,
close to the point of cable entry as practicah
XM is a registered
Radio Inc.
trademark
This product is nmnufactured
Neural Audio Corporation.
as
of XM Satellite
under license ffum
Sony Corporation hereby grants the user a nonexclusive, non-transli:rable,
limited license right
to use this product under the US and loreign
patents pending and other related technology
owned by Neural Audio Corporation.
"Neural" and "Neural Audio" and "Neural
Surround" are trademarks of Neural Audio
Corporation.
3 US
Welcome!
................................................
About This Manual
3
.................................
This System Can Play the Following
Discs .................................................
Getting
Started
6
Playing
10
and
19
Step 3: Positioning
...24
the System
Step 4: Performing
the Quick
Setu p ........................................
24
Getting Started
- ADVANCED
-
Playing
the Speakers
on a Wall .......... 28
Connecting
the TV (Advanced)
............ 30
Connecting
Other
............. 34
Components
Components
Enjoying
............................
TV or VCR Sound
Speakers
from
..................................
Selecting
the Movie or Music
Mode .........................................
40
the Angles
52
About the Disc ... 54
............................
the Subtitles
........................
(A/V SYNC)
About MP3 Audio Tracks
Playing
56
57
and JPEG
Files .....................................
DATA CDs or DATA
58
DVDs with
MP3 Audio Tracks and JPEG hnage
Files ................................................
60
Playing Audio Tracks and hnages as a
Slide Show with Sound ..................
62
Playing
41
VIDEO
(Ver.2.0)
CDs with PBC Functions
.........................................
64
(PBC Playback)
Enjoying Surround Sound by Using Sound
Field ................................................
42
Tuner
Functions
Presetting
Radio
Listening
to the Radio
MONO)
Listening
to the XM Radio ...................
67
Functions
Presetting
XM Radio
70
Enjoying
Multiplex
(DUAL
Broadcast
Sound ... 44
for Playing
Searching for a Particular Point on
a Disc ..............................................
(Scan,
Slow-motion
45
Play, Freeze
Frame)
Searching for a Title/Chapter/Track/
Scene, etc ........................................
46
Searching
47
(Picture
4 US
52
.............................
Adjnsting the Delay Between the Picture
and Sound .......................................
57
Sound Adjustments
Various
Discs
Menu ........................
Information
Displaying
39
All
51
the Sound
hnage
37
...............................
Selecting [ORIGINAL]
or [PLAY LIST]
on a DVD-R/DVD-RW
.................. 54
Basic Operations
Playing Discs .................................
Enjoying the Radio or Other
50
Play)
Using the DVD's
Viewing
............. 27
48
Order .....................
Repeatedly
Changing
off tile Demonstration
................
Play)
Play)
(Repeat
Changing
47
Play)
in Random
(Shuffle
............................
from the Point Where
the Disc .....................
Your Own Program
(Program
Step 2: Connecting
the System
TV ..............................................
Installing
Creating
- BASIC-
the Speakers
Playback
You Stopped
(Resume
Step 1: Assembling
Turning
Resuming
6
by Scene ...............................
Navigation)
Stations ......................
..........................
Channels
............
65
66
Other
Additional
Operations
Controlling tile TV with the Supplied
Remote ............................................
72
Using the THEATRE SYNC
Function ..........................................
73
Using the Sound Effect .........................
Using the Sleep Timer ..........................
Changing the Brightness of the Front
Panel Display ..................................
Using the DIGITAL MEDIA PORT
Adapter ...........................................
Deactivating the Buttons on the Unit....
(Child Lock)
Advanced
Adjustments
Settings
75
75
76
77
78
and
Locking Discs .......................................
(CUSTOM PARENTAL
CONTROL, PARENTAL
CONTROL)
Getting Optimal Surround Sound for a
Room ................................................
(SPEAKER FORMATION)
Calibrating the Appropriate Settings
Automatically .................................
(AUTO CALIBRATION)
Using the Setup Display ........................
Setting the Display or Sound Track
L:mguage ........................................
[LANGUAGE SETUP]
Settings for the Display .........................
]SCREEN SETUP]
Custom Settings ....................................
[CUSTOM SETUP]
Settings for the Speakers .......................
[SPEAKER SETUPI
Returning to the Default Settings ..........
Information
Precautions ............................................
Notes about the Discs ...........................
95
96
Troubleshooting ....................................
Self-diagnosis Function ......................
(When letters/numbers appear in
the display)
Specifications ......................................
Glossary ..............................................
Language Code List ............................
Index to Parts and Controls ................
96
100
Guide to the Control Menu Display ...
DVD Setup Display List .....................
System Menu List ...............................
Index ...................................................
111
114
115
116
101
103
107
108
79
84
86
88
88
90
92
94
5 US
• The instructions
ill tills manual describe the
controls on the remote. You cm_ also use the
controls on the unit if they have the same or
similar names as those on the remote.
• The instructions
in this manual
Any difference
Disc logo
are for DAV-
HDX5I)0 and DAV-HDX501W.
DAVHDX5I)0 is the model used for illustration
purposes.
Format of
discs
in operation
DVD VIDEO
V|DEO
is
clearly indicated in the text, for example,
"DAV-HDX500
only."
DVD-RW/
DVD
• The Control Menu items may vary depending
OIS
the
RW
R
R4.7
area.
• "DVD" may be used as a general term for
DVD VIDEOs, DVD+RWs/DVD+Rs,
and
DVD-RWs/DVD-Rs.
• Measurements
are expressed
North American models.
• The l\_llowing
DVD+RW/
DVD+R
in feet (fl) for
aVID + ReWHt;able
OVa + R
symbols are used in tiffs
nlanuah
DVD+R
Symbol
Meaning
Functions available for DVD
VIDEOs, DVD-Rs/DVD-RWs in
video mode, and DVD+Rs/
DVD+RWs
r_L
VIDEO CD
(Ver. 1.1 and
2.0 discs)/
Audio CD
DIGITAL
AUDIO
CD-RW/CD-R
Functions available for DVD-Rs/
DVD-RWs in VR (Vide()
(audio data)
(MP3 files)
Recording) mode
(JPEG files)
DIG
ri'AL
AU _3II0
DBGITAL
AUOIO
Functions available for VIDEO
CDs (including Super VCDs or CDRs/CD-RWs in video CD formal or
Super VCD format)
Functions ivailable for music CDs
or CD-Rs/CD-RWs in music CD
formal
Functions available for DATA CDs
(CD-ROMs/CD-Rs/CD-RWs)
conlaining MP3 _' audio tracks and
JPEG image files
Functions available for DATA
DVDs (DVD-ROMs/DVD-Rs/
DVD-RWs/DVD+Rs/DVD+RWs)
conlaining MP3 ,r audio tracks and
JPEG image files
,r MP3 (MPEGI Audio Layer 3) is a slandard formal
defined by ISO/MPEG which compresses
audio
data.
6 US
"DVD-RW," "DVD+RW," "DVD+R,"
"DVD VIDEO," and the "CD" logos are trademarks.
Note
about
CDs/DVDs
The system can play CD-ROMs/CD-Rs/CDRWs recorded in the following formats:
- audio CD format
VIDEO CD lbrmat
MP3 audio tracks and JPEG image files of
fi)rmat conlorming to ISO 9660 Level 1/
Level 2, or its extended format, Joliet
The system can play DV[)-ROMs/DVD+RWs/
DVD-RWs/DVD+Rs/I)VD-Rs
recorded in the
lollowing
lormats:
Music
Forma0
This product is designed
recorded in tile t_)rmats listed on page 6
• CD-ROMs recorded in PHOTO CD tk_rmat
• Data part of CD-Extras
• DVD Audios
conform
playable
Note
MP3 audio
tracks or JPEG image files
• DVD-RAMs
with a diftizreut region code
shape (e.g.,
card, heart)
• A disc with paper or stickers on it
about
on
and may not be
DualDiscs
A DualDisc is a two sided disc product which
mates DVD recorded material on one side with
conform to the Compact Disc (CD) standard.
playback on this product is not guaranteed.
About
Also, the system cannot play the t_)llowing
discs:
• A disc that has the adhesive
or a sticker still lel: on it
to the CD standard
by this product.
digital audio material on the other side.
However, since the audio material side does not
• Super Audio CD
• DATA DVDs that do not contain
• A disc thai has a non-standard
to play back discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
among those discs, there are some that do not
Tile system cannot play the following discs:
• CD-ROMs/CD-Rs/CD-RWs
other than those
DVD.RW/DVD+
with
copyright protection technologies are marketed
by some record companies. Please be aware that
Example
of discs that the
system cannot play
Notes
encoded
protection
technologies
- MP3 audio tracks and JPEG image files of
li)rmat conl\_rming to UDF (Universal Disc
• A DVD VIDEO
(page 8, 105)
discs
copyright
of cellophane
tape
CD.R/CD.RW/DVD.R/
R/DVD+RW
In some cases, CD-R/CD-RW/DVD-R/DVDRW/DVD+R/DVD+RW
cannot be played on
this system due to the recording quality or
Multi
Session
CD
• This system can play Multi Session CDs when
an MP3 audio track is contained in the first
session. Any subsequent MP3 audio tracks
recorded in later sessions can also be played
back.
• This system can play Multi Session CDs when
a JPEG image file is contained in the first
session. Any subsequent JPEG image files
recorded in later sessions can also be played
back.
• If audio tracks and images in music CD lbrmat
or vide() CD l\trmat are recorded in the first
session, only the first session will be played
back.
physical condition of the disc, or the
characteristics
of the recording device and
authoring software.
The disc will not play if it has not been correctly
finalized. For more inl\lrmation, see tile
operating instructions for the recording device.
Note that some playback functions may not
work with some DVD+RWs/DVD+Rs,
even if
they have been correctly
finalized.
In this case,
view the disc by normal playback. Also some
DATA CDs/DATA DVDs created in Packet
Write format cannot be played.
continued_
7us
Region
code
Your system has a region code printed on the
rear of the unit and will only play DVDs labeled
with the same region code.
DVD VIDEOs
labeled _=J will also play on ttlis
system.
lfyou try to play any other DVD VIDEO,
message [Playback prohibited by area
d_e
limitations.] will appear on the TV screen.
Depending on the DVD VIDEO, m) region code
indication may be given even though playing the
DVD VIDEO is prohibited by area restrictions.
Note about playback
operations
of DVDs and
VIDEO CDs
Some playback operations
of DVDs and VIDEO
CDs may be intentionally
set by software
producers. Since this system plays DVDs and
VIDEO CDs according to tl_e disc contents the
software producers designed, some playback
llzamres may not be available. Be sure to read the
operating instructions supplied with the DVDs
or VIDEO CDs.
Copyrights
This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection tectmology must be
authorized by Macrovisiou, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
This system incorporates with Dolby* Digital
and Dolby Pro Logic (11) adaptive matrix
surround decoder and the DTS '_': Digital
Surround System.
"
Manufuctured
Laboratories.
"Dolby',
under license fiom Dolby
"Pro Logic',
and the double-D
symbol
are
trademarks of Dolby Laboratories.
"" Manufactured
under license fiom DTS, lnc.
"DTS" and "DTS Digital SurrouM"
trademarks of DTS, lnc.
8us
are registered
See Unpacking
Inserting
ill Specifications,
batteries
into
page 101.
the
remote
You can control tire system using tire supplied remote. Insert two R6 (size AA) batteries by matching
the (_ and G ends on the batteries to the markings inside the compartment. To use the remote, point it
at the remote sensor [] on the unit.
m
• Do not leave the remote
• Do not use a new battery
in an extremely
• Do not drop any foreign object
• Do not expose
the remote
hot or humid place.
with an old one.
into Ihe remote
casing,
sensor to direct sunlight
• If you do not intend to use the remote for an extended
from battery leakage and corrosion.
Attaching
Attach
li'om
the foot pads
the supplied
foot
pads
particularly
or lighting
when replacing
apparatus.
the batteries.
Doing so may cause a m dfunction.
period of time, remove
the batteries
to avoid possible
damage
to the subwoofer
to the bottom
of the subwool_2r
to stubilize
the subwool_2r
and
prevent
slipping.
2_
gu$
it
Before connecting the speakers,
(For the t?ont speakers.)
About how m connect
attach the speaker stand to d_e speaker.
the speaker cords to the SPEAKER
jacks, see page 21.
• Spread a cloth on the floor to avoid damaging the floor.
• You can use the speaker without the speaker stand by installing it on the wall (page 28).
Use the screws illustraled
below.
Screw (small, black)
Screw (small, silver)
Screw (large, with
washer)
Thread the speaker cord through the hole on the base and post.
Be careful with the orientation
2 holes.
About
the
speaker
of the post. Thread tire speaker cord into tlre end of the post that has
cord
The comrector and color tube of tire speaker cords are the same color as fl_e lahel of the jacks to be
connected.
Use the speaker cords as follows:
• Front speaker (L): White
• Front speaker (R): Red
DAV-HDX500
Bottom of the base
Post (s_
2 holes
Speaker cord
Top of the base (large)
10 us
DAV-HDX501W
Bottom of the base
2 holes
Speaker cord
Top of the base (small)
2
Attach
the post cover to the other
end of the post,
Orient the slot toward you, attach tlle post cover so that the slot of the post engages
with tlle tab of
the post cover, then secure with the screw.
Thread the speaker cord through
' the hole of the post cover.
Speakercord
Post cover
Upper part of the
post
Screw (small, black)
11us
3
Lay the post
the post
in the
with the
the speaker
speaker cord.
Select
tile
slot
of the
mounting
whose
color
speaker,
plate and
of the
jack
slide
the
post to the end
of the
slot, then
panel of speaker
matches
the color
secure
screws.
on the rear
tube
DAV-HDX500
Post cover
Be careful the
orientation of the
post cover when
placing the post.
Secure 2 screws (large, with
washer) in criss-cross
speaker
'
_
pattern.
late
Rear of the
DAV-HDX5OIW
Post cover
Be careful the
orientation of the
post cover when
placing the post.
Secure 2 screws (large, with
washer) in criss-cross pattern,
Rear of the speaker
12us
Mounting
plate
" "
of
When securing the mounting
plate, position the mounting
plate depending on the desired height of
the speaker.
DAV-HDX500
Low position
DAV-HDX501
Low position
After attaching
High position
W
High position
the post to the base, you can adjust the height of the speaker.
13 us
4
Connect
the
Be sure
to match
speaker
cords
Ihe speaker
to the
cord
speaker.
to the appropriate
terminal
to (_.
DAV-HDX500
_
olor tube
Front speaker (L): White
Front speaker (R): Red
Rear of the speaker
DAV-HDX5OIW
Color tube
Front speaker (L): White
Front speaker (R): Red
Rear of the speaker
14us
on the components:
(_) to (_), and 0
5
Attach the post to the base.
Insert the post so that the slit on tile lower part of the post aligns with the projection of the base,
then secure the post with the 2 screws.
DAV-HDX500
Projection
Base
Screws
(small, silver)
DAV-HDX501W
Post
/_..j,_
ISlit
o
Projection
Base
Screws
(small, silver)
m
• Make sure that the slot on the pest aligns with the projection
of the base by rotating
the pest slightly.
15us
6
Adjust
the height
Loosen
(but
Adjust
of the
speaker.
do not remove)
the speaker
the screws,
of one side.
• When a_[iusting the height
then
adjust
adjust
ef the speaker,
the height
another
speaker
grasp the speaker
of the speaker,
by checking
se that the speaker
then
lines
secure
the screws.
as u guide.
dees net falh
DAV-HDX500
H
Lines
,_Post
In addition to the screws
secured in Step 3, secure
2 more screws, (Secure 4
screws in total,)
Loosen 2 screws.
DAV-HDX501W
..... _,,_
Lines
........
Post
In addition to the screws
secured in Step 3, secure
2 more screws. (Secure 4
screws in total.)
Loosen 2 screws.
(
16us
7
Take up any speaker
cord slack.
DAV-HDX500
Take up slack in the speaker cord by pulling lmm tile bottom of the base and hook the speaker cord
ill the cord clamp.
Cord clamp
Secure the speaker cord by
running it through the slot,
Bottom of the base
.......÷
Adjust the length of the cord.
DAV-HDX501W
Take up slack ill fl_espeaker cord by pulling fronl lhe bollom oflhe base.
Secure the speaker cord by
running it through the slot,
_,,_,_ Adjust the length of the cord.
17us
Fully-assembled
illustration
DAV-HDX500
Front speaker (L):
White label
White
Front speaker (R):
Red label
Red
DAV-HDX501W
Front speaker (L):
White label
White
18us
Front speaker (R):
Red label
Red
The fkHlowing is the basic connection of tile unit to the speakers and TV. For other TV connections,
page 30. For other cotnponem connecOon, see page 34.
To accept progressive
Refer to the connection
lollowing
see
signals, see page 32.
diagram
below, and read the additional
information
from @ to @ on the
pages.
DAV-HDX500
Igus
DAV-HDX501W
• When you install Ihe wireless kit WAHT-SDI
(supplied with DAV-HDX5//IW
enjoy wireless performance.
For details, see "Connecting Other Components"
instructions of the WAHT SDI
20us
only) in Ihe DIR-TCI slot, you can
(page 34) and the operating
(_) Connecting
Required
the Speakers
cords
The connector
and color robe of the speaker cords arc the same color us the label of the jacks to be
COUllCctcd.
To the SPEAKER jack
m
• Do not catch the speaker cord insulatkm in the SPEAKER.jack.
To avoid
short-circuiting
Short-circuiting
the
speakers
of the speakers may damage the system. To prevent
this. be sure to follow these
precautions when connecting the speakers. Make sure tire bare wire of each speaker cord does not touch
another speaker terminal or the bare wire of another speaker cord, such as shown below.
Stripped speaker cord is touching
another speaker terminal.
Stripped cords are touching each other
due to excessive removal of insulation.
Alter connecting all tire components, speakers, and AC power cord (mains lead), output a test tone to
check that all the speakers are connected correctly. For details on outputtiug a test tone, see page 93.
If no sound is heard from a speaker while outputting a test tone, or a test tone is output from a speaker
other than the one currently displayed on tire Setup Display, the speaker rnay be short-circuited, lfthis
happens,
check the speaker
connectkm
again.
• Be sure to match the speaker cord to the appropriate terminal on the components: (_ to (_, and O to O. If the cords
are reversed, the souM will lack bass and may be distolled.
21us
@ Connecting
Required
cords
_)
cord
Video
the TV
@
_)
Audio
cord
(not
_
Yellow
supplied)
_
• When
you _,r{ln[ [O oulpul
the TV
sound
hite (Uaudio)
Red (R/audio)
or slereo
sound
of a 2 channel
source
from
the 6 spe &els,
selecl
the "Dolby
Pro Logic," "Dolb 3 Pro Logic I1 MOVIE " or "Dolbv Pro Logic I1 MUSIC _sound field (page 42).
@ Connecting
the Antenna
To
AM
connect
the
loop
(Aerial)
antenna
(aerial)
The shape and d_e lenglh of the url_ennu (aerial) is designed
Io receive AM signals. Do not dismantle
or roll up lhe antenna (aerial).
1
Remove only the loop part from the plastic stand.
2
Set up the AM loop antenna (aerial).
3
Connect the cords to the AM antenna (aerial) terminals.
Cord (A) or cord (B) can be connected
to either lcrrninal.
pushing
_%Jl_
_
Insert the
the terminal
cord
down
clamp.
B
\_
I_sert until this
m
• Do not place the AM loop antenna (aerial) near the unit or other AV equipment, as noise may result.
• A_!iust the direction of the AM loop antenna (aerial) lbr best AM broadcast sound.
4
Make sure the AM loop antenna
22us
(aerial)
is connected firmly
by pulling softly.
To connect
the
FM wire antenna
FM wire antenna
(supplied)
(aerial)
(aerial)
FM wire antenna (aerial)
(supplied)
or
_._
FM 75 _ COAXIAL
jack
,¢_
FM 75 _ COAXIAL jack
m
•Be sure telkdly exlend
• After connecting
Ihe FM wire anlenna
(aerial).
(aerial), kee l) it as horizontal
Ihe FM _.x,r]re
antenna
• If you have peer FM reception, use a 75-ehm
antenna (aerial) as sll()_.x,'[)below.
coaxial
as pessible.
cable (nel supplied)
te connect
the unil le an outdoor
FM
Unit
'_Outdoor
(_) Connecting
Before
connecting
speakers
the AC power
the AC power
cord
(mains
FM antenna
cord (mains
lead)
of Ibis
(aerial)
lead)
unit to a wall outlet
(mains),
connect
lhc
to lhe unil.
23us
Positioning
the speakers
For the best possible
surround
sound, all the
Follow Ihe steps below to make the minimum
number of basic adjustments
for using the
system.
speakers other than the subwoofer should be
placed at the same distance from the listening
position (_).
I/_J
::: :;::
_
i
i
i
7
Place speakers as illustraled below.
;7! ;777
;7;;J
f'
O
DISPLAY
1
Turn on the TV.
2
Press I/(_.
m
m
• Do not set the speakers in an inclined posmon.
• Do not place the speakers in locations that are:
• Disconnect the headphones when you perform
the Quick Setup. You cannot operate steps after
11 wilh the headphones connected.
• Make sure that the function is set to "DVD"
Extremely hot or cold
Dusty or dirty
Very humid
Subject to vibrations
Subject to direct sunlight
• Use caution when placing the speakers and/or
speaker stands that are attached with the speakers on
a specially treated (w ixed, oile& polishe& etc.) floor,
as staining or discoloration may result.
• When cleaning, use a soft cloth such as a cleaning
cloth lbr glasses.
• Do not use any type of abrasive pad, scouring
powder, or solvent such as alcohol or benzine.
• Do not lean or hang on the speaker, as the speaker
may fidl down.
(page 37).
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [ENTER] to rur'i QUICK SETUP.]
appears at the bottom of the TV screen. If
this message does not appear, recall the
Quick Setup display (page 26) and perl\_rm
again.
4
Press @ without inserting
The Setup Display
language
• When you change the positions of the speakers, it is
recommended that you change the settings. For
details, see "Getting Optimal Surround Sound lbr a
Room" (page 82) md "Calibrating the Appropriate
Settings Automatically" (page 841.
24us
appears.
for selecting
used in the on=screen
a disc.
the
display
m
SETUP
• When the wireless kil WAHT-SDI (supplied
wilh DAV-HDX5OIW only) is installed,
[STANDARD (WIRELESS)] appears instead.
10 Press
@.
11Connect
5
mic to the
Press t"/4, to select a language.
Set up the calibration
The system displays
using a tripod, etc. (not supplied). The front
ol each speaker should face the calibration
mic, and fllere should be no nbstruclion
the menu and subtitles
ill the selected language.
6
the calibration
A.CAL MIC jack on the front panel and
press t,14, to select [YES].
Press
@.
between
The Setup Display
for selecting
ratio of the TV to be connected
the aspect
the speakers
mic at the ear level
and the calibration
mic. Be quiet during the measurenlent.
appears.
AUDIO IN/A.CAL MIC
Calibration mic
7
Press ,t,/4, to select the setting
matches your TV type.
that
• If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
[16:9] (page 88)
• If you have a 4:3 standard TV
[4:3 LETTER BOX] or 14:3 PAN SCAN]
(page 88)
8
Press @.
The Setup Display
formation
9
fnr selecting
tile speaker
appears.
Press 1.-/+ to select the speaker
formation
image as the speakers are
actually positioned.
Fnr details, see "Getting
Sound tk)r a Room"
Optimal Surround
(page 82).
25us
12PressQ.
• If you change the position of the speakers, reset Ihe
speaker settings. See "Getting Optimal Surround
Sound l_)r a Room" (page 82) and "Calibrating the
Appropriate Settings Automatically" (page 84).
• If you want to change any of the settings, see "Using
the Setup Display" (page 86).
To
1
Auto
Calibration
slarts.
recall
the
Quick
Setup
display
Press O DISPLAY when the system is in
stop mode.
The Control Menu display appears.
• Loud test sound is output when [AUTO
CALIBRATION] starts. You cannot turn the
volume down. Give consideration to children
2 Press ,I,/4, to select
press Q.
[SETUP], then
The options lot [SETUP] appear.
and neighbor.
• Aw)id being in the measurement area and
making noise during the measurement (which
takes about 1 minute), as it may interim:rewith
n/easurement.
13Unplug
the calibration
mic and press <.-/
-) to select [YES].
3
Press ,I,/4, to select [QUICK], then press @.
The Quick Setup display appears.
m
• The
envil-onmenl
of Ihe room
in which
the
syslem is inslalled may afl_ct measurements.
• If measuremenl fails, lk)llow the message then
relry [AUTO CALIBRATION].
• When you select [SECOND ROOM[ for
[SPEAKER FORMATION], measurement of
[SURROUND L] and [SURROUND R] is nol
displayed.
14 Press
C).
Quick Setup is finished. All couneclious
and setup operations are complete.
To
quit
the
Quick
Press Q DISPLAY
26us
Setup
in any Step.
Setting the demonstration
mode to on/off
1
2
Press SYSTEM MENU.
Press ,I,/4, repeatedly until "DEMO"
appears in the front panel display, then
press Q
or -).
O
O
_=.
_Q
Press '1'/4, to select a setting.
@ _
li(_
The default setting is underlined.
• "DEMO ON": sets the demol]stration
illode to on.
b
• "DEMO
:
D.
I
OFF": sets the demonstration
mode to off.
4
Press Q.
The setting is made.
÷1,1.1÷, _',
5
MENU
Press SYSTEM MENU.
Z
O
m
121
I
The system menu turlis ofl.
After coimecting the AC power cord (mains
lead), the demonstration
appears in the f'ronl
panel display. When you press I/(_) on the
remote, the demonstration turns olT.
• When you press I/_ on the uniL the demonstration
does not turn oil.
• When you set the demonstration mode in the system
menu tO on, the demonstration does not turn off even
though you press |1(_)on the remote. To turn off the
demonstration, set the demonstration mode to off,
Ihen press |/(_) on Ihe remote. When the
demonstration mode is set to off, the system saves
power in standby mode.
• If the system is at its facto Wdefault settings (ex. after
performing <<COLDRESET" (page 94))>you can turn
off the demonstration simply by pressing |/(_) on Ihe
remote. Otherwise, to stop the demonstration, you
need to set "DEMO" to "DEMO OFF."
27us
For the
front
speakers
of DAV-HDX500
For the front
HDX501W
speakers
of DAV-
You can use the speakers by installing o11the
wall.
Installing
wall
1
the speakers
Prepare
screws
(not
suitable
for the
hole on the
each speaker.
below.
on a
supplied)
See the
that
back
are
of
illustrations
)0 rnm
; inches)
.....................
4 mm (5/32 inch)
I,
,I
30 mm (1 3/16 inches)
6 to 9 mm
(114to 318inch)
Hole on the back of
the speaker
Forthe
2
Fasten
the screws
For the
center
otherspeakers
to the wall.
speaker
265 mm
(10 7/1Ginches)
Hang the speakers on the screws.
4.6
mm
(3/16 inch)
6to9mm
(114to 3/8 inch)
10 mm
(13/32 inch)
Rear of speaker
28us
• Use screws Ihat are suitable lk>rthe wall material and
strength. As a plaster board wall is especially fragile,
attach the screws securely to a beam and fasten them
to the walh Install the speakers on a vertical and fiat
wall where reinlk)rcement is applied.
• Contact a screw shop or installer regarding the wall
material or screws to be used.
0
¢D
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
I
z
m
I
2gus
Sends file played back DVD image lo tl_e connected TV.
Check lhe jacks of your TV, and choose conneclion melhod t_, O, _, or _. Picture quality improves
in order lron_ t_ (standard) to 1_ (HDMI).
O
TVwith
HDMP' IN jack
To
To
HDMI*
OUT
S VIDEO
To COMPONENT
VIDEO OUT
O
TV with COMPONENT
To VIDEO
O
TV with VIDEO IN jack
TV with S VIDEO IN jack
VIDEO IN jacks
:Signal flow
" HDMI (high-definition multimedia interface)
The system incorporates High-Definition Multimedia Interface (HDMI TM) technology.
HDML the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
30us
_)
To connect
to a TV
with
the
VIDEO
IN jack
Connect tile video cord.
_
_) To connect
to a TV with
the S VIDEO
Yellow
IN jack
Cnnnect an S video cord (not supplied). To use the S ;iden jack instead nf the video jack, your TV
mnnilor musl also be connected xia an S video jack. S viden signals are nn a separate bus from Ihevideo
signals and will not be output through Ihe video jack.
O
_=.
I
(_
To connect
to a TV
with
the
COMPONENT
VIDEO
IN jacks
Connect a cnmponent video cord (not supplied). To use tire COMPONENT
VIDE() OUT jacks (Y, PI3/
Cm PR/CR) instead of the "_iden jack, ynur TV monitor must be equipped wifll via COMPONENT
VIDEO IN jacks (Y, PB/Cm PR/CR). If ynur TV accepts prngressi'_ e formal signals, you must use this
couueclion and set the output channel ol Ihe system to progressive lormat (page 32).
z
o
rn
I
Blue
reen
Red
_
(_ To connect
to a TV with
interface)/DVI
(digital
visual
the HDMI
(high-definition
interface)
multimedia
IN jack
Use a certified HDMI (high-definition multimedia irrlerface) cord (uol supplied) In enjoy high quality
digital picture arm sound through tile HDMI OUT (high-defiuitinn multimedia interface out) jack.
To connect
to a TV with
DV| (digital
visual
interface)
input
Use an HDMI (high-definition multimedia iuterface)-DVl (digital visual irrterface) converter cord (not
supplied) with an HDMI (high-definition multimedia interfuce)-DVl (digital visual irrterl'._ce)adaptnr
(not supplied). The DVI (digital visual irrterface) jack will not accept any audit>signals. Furthermore.
ynu cannot connect the HDMI OUT (high-definition multimedia irrterface nut)jack tn DVI (digital
visual interface) jacks that are nnt HDCP (high-bandwidthdigital content protection) compliant (e.g.,
DV1 (digital visual interface)jacks on the computer displws).
To select
the type of video
definition
multimedia
signal
interface
output
from
the HDMI
OUT (high-
out) jack
When ynu connect the unit and the TV \vith the HDMI coM, selects tile type of video signals output
from the HDMI OUT (high-definition multimedia interlitce out)jack.
Fnr details, refer alsn to tire operating instructions supplied with tile TV/projectnr, etc.
1
Press FUNCTION repeatedly to select "DVD."
continued_
31us
2
Press VIDEO FORMAT.
The current type of'_ideo
signals appears
Each time you press VIDEO FORMAT,
in tile front panel display.
the display changes
as tBllows:
128(1 _ 720p 'r:
4,
• "720 x 480p":": Sends 72(1 x 480p video signals/''
• "1280
x 720p"% Sends
128(t x 720p vide() signals.
• "1920 x 1080i'>': Sends 1920 x 1080i vide() signals.
"i: interlace, p: progressive
"'Depending
on the country, [720 x 576p1 may appear.
• When the HDMI indicator on the front panel lights up, images other than [720 x 480p1 or [720 x 576p1 are stretched
vertically.
When
connecting
Depending
to a standard
4:3
screen
TV
on the disc, the image may not fit your TV screen.
To change the aspect ratio, see page 88.
Does your TV accept
progressive
signals?
Progressive is the meflmd for displaying TV images which reduces flickering, and sharpel]s Ihe image.
To display using Ibis method, you need Io colmecl to a TV thai accepts progressive signals.
VIDEO _III_
FORMAT
ii::i ii:_
_ ii::_ ii
::!_if!:::ii_ ii
i
ii
"PROGRE"
1
32us
lights up in the front panel display when the system outputs progressive signals.
Press FUNCTION
repeatedly to select "DVD."
2
Press VIDEO FORMAT.
The current signal appears in the flout panel display.
Each time you press VIDEO FORMAT, tile display changes as lk)llows:
E
ORMAL (INTERLACE)
PROGRESSIVE
• NORMAL
O
I'D
(INTERLACE)
Select this setting when:
- your TV does not accept progressi'_e signals, or,
- your TV is connecled Io jacks odler than the COMPONENT
VIDEO
OUT jacks (MONITOR
_,
_'
I
OUT (V1DEO/S VIDEO)).
• PROGRESSIVE
Select this setting where
- your TV accepts
Z
progressixe
signals, and,
the TV is com*ected to tile COMPONENT
Normally select tiffs under file abo'_ e condition.
selects the appropriate con'_ersion method.
0
I'll
VIDEO OUT jacks.
This automatically
I
detects Ihe s<)fiware type, and
Note that tile picture will not be clear or no piclure will appear if you selecl these settings
either of tile above conditions are not met.
v,,rhen
• When you connect the unit and Ihe TV wilh file HDMI cord during the system is sel Io "NORMAL
(INTERLACE)," the syslem is sel Io "PROGRESSIVE" automatically.
• When you connect the unit and the TV with the HDMI cord, VIDEO FORMAT is used lk)r selecting (he type of
video signals output from the HDMI OUT jack. For details, see "To select the type of video signal output from the
HDMI OUT (high-definition multimedia interface out) jack" (page 311.
About
DVD
software
types
and
the
conversion
method
DVD sofiware cml be divided into 2 types: Iihnd)ased software mid ;'ideoq_ased software.
Video-based sot'iware is derived from TV, such as dramas and sit-corns, and displays images at 30
frames/6I) fields per second. Film-based so0;,vare is derived from fihn and displays
per second. Some DVD software contains both video and film.
images at 24 frames
In order l\)r these images to appear natural on your screen when output ill progressive lormat, tile
progressive signals need to be converted to match the type of DVD sof);,vare that you are watching.
• When you play video-based software in progressive signal format, sections of some types of images may appear
unnatural due to the conversion process when output through the COMPONENT VIDEO OUT jacks. Even though
you set to "PROGRESSIVE," images from the MONITOR OUT (VIDEO or S VIDEO)jack are unafli:cted as they
are output in the interlace format.
33us
You can enjoy oilier components
by connecting
lhe V1DEO/AUD10
OUT jacks ol them.
VCR, digital satellite receiver
or PlayStation 2, etc.
To SAT/CABLE
To SAT/CABLE
=:::::Z:x (COMPONENT
VIDEO IN)
or
DIGITAL MEDIA PORT adapter
:Signal flow
_' _
34us
CAUTION
To connect
the
SAT/CABLE
(VIDEO
VIDEO/AUDIO
OUT
IN/AUDIO
IN)
jacks
jacks
of other
of this
components
to the
unit
Connect the VCR or other components to the SAT/CABLE (VIDE() IN/AUDIO IN) jacks usiug tile
video/audio cord (not supplied). When connecting a cord, be sure to match the color-coded sleeves to
the appropriate
jacks on the components.
if)
I'D
_=.
To connect
the
DIGITAL
Connect a DIGITAL
the DIGITAL
To
listen
MEDIA
MEDIA
to the
MEDIA
PORT
adapter
PORT adapter (not supplied) to the DMPORT1
PORT adapter, see "Using tile DIGITAL
MEDIA
portable
through
audio
source
Connect tile audio output jacks of the portable
of the unit with the stereo mini-plug
sound
or 2 jack. For details of
PORT Adapter"
the
I
(page 77).
system
audio source to the AUDIO 1N jack on tile front panel
z
o
m
cord (not supplied).
i
• When listening to MP3 lbrmat recordings using a portable audio source, you can enhance the sound.
Press FUNCTION to select "AUDIO. ' Connect the portable audio source. Press SOUND FIELD +_ repeatedly
until "A.F.D. STD" appears in the front panel display.
To cancel select other than "A.F.D. STD."
If you
connect
or OPTICAL)
a digital
satellite
receiver
with
a DIGITAL
OUT
(COAXIAL
jack
A digital satellite receiver cml be connected
OPTICAL) jack instead of the SAT/CABLE
to the SAT/CABLE
(DIGITAL IN COAXIAL
(AUDIO IN) jacks of the unit.
To connect, use a digital coaxial cord (not supplied) lot the DIGITAL
optical cord (not supplied) l\tr the DIGITAL IN OPTICAL jack.
1N COAXIAL
or
jack or digital
The system can accept both digital and analog signals. Digital signals have priority over analog signals.
(COAXIAL has priority over OPTICAL.) If the digital signal ceases, the analog signal will be
processed
after 2 seconds.
Digital coaxial cord
or
@
If you connect
a digital
satellite
Digital optical cord
receiver
without
a DIGITAL
OUT jack
Cormecl the digital satellite receiver to tile SAT/CABLE (AUDIO IN) jacks only of tile unit.
continued_
35us
Toconnectthe COMPONENT
VIDEOOUTjacks ofother componentsto
the COMPONENT
VIDEOINjacks of this unit
Connect other components to the SAT/CABLE (COMPONENT VIDEO IN)jacks (Y, PI_/CB,PP./CR)
using the component vide(>cord (not supplied). When connecting a cord, be sure to match the colorcoded sleeves to the appropriate jacks (>i1the components.
_
Wireless
system
option
When you install the WAHT-SD 1 (supplied
enjoy wireless performance by transmission
operating
instructions
Blue
reen
Red
with DAV-HDX501W
only) in the DIR-TC 1slot, you can
of the sound to the surround speakers. For details, see the
of the WAHT-SDI.
• Be sure to make connections securely to avoid hum and noise.
• When you connect another component with a vo]ullle control, turn up the vohlme of the other
where sound is not distorted.
36us
components
to a level
4
Press
DISC 1-5.
Press the button of the disc number yon
want.
When no disc is in the disc stocker you
selected. "NO DISC" appears. Perlimn next
Step while '"_D1SC-I '> (eg., 24)"
5
6
_
Disc tray
_
Load a disc.
Place one disc on tile tray, and then press _.
Adjust the
volume
I/(!)
flashes.
Press _'.
FUNCTION
DISC 1-5/
indicators
Connect
headphones
m
• When you play m 8 cm disc, place it en the
inner circle of the tray. Be carcflfl that the disc is
not skewed en the inner circle ef the tray.
• De net forcibly press the disc tray closed with
yeur finger, as this may cause malfunctien.
iii ii!:
iii
iii CI <i;_Ci
• De net place mere than ene disc on the tray.
7
Press £>.
The system starts playhack
play).
(continuous
To load other discs, press DISC 1-5 (that is
not loaded with a disc) and z_ and load the
disc.
The system starts playback
(condnunus
play) of the disc whose DISC indicator
is
green.
Depending on file DVD VIDEO or VIDEO CD.
some operations may be different or restricted.
Refer In the operating
your disc.
instructions
supplied with
Turn on yourTV.
2
Switch the input selector on the TV to
this system.
Press I/(_.
Tile system turns on.
Unless the system is sel to "DVD."
FUNCTION to select "DVD."
Adjust the volume on the unit.
The volume level appears on the TV screen
and in the front panel display.
1
3
To play back other discs, press DISC SKIP
on the rernnte or DISC 1=5 on the unit.
press
• Depending on the system status, the relume level
may net appear on the TV screen.
• When you set the HDMI CONTROL functien to on
(page 911),the TV that is connected to the system with
Ihe HDMI cord can be synch-eperated wilh the
system. For details, see the HDMI CONTROL Guide
(supplied separately).
37us
Additional
• When you connect the system and TV with the HDMI
cor& you can operate then/ simply, using the HDMI
CONTROL
function. For details, see the HDMI
CONTROL
Guide (supplied
• The DISC
green:
I-5 indicators
separately).
change
the disc is selecte&
color as follows:
or the disc is being
orange: a disc is loaded
selected.
The indicator
inserted.
To
save
Press
Stop
•
Pause
II
play after pause
II or [2:>
Go to the next chapter,
track, or scene
_
(except
Go back to the preceding
_
(except for JPEG)
power
in
chapter,
disc is
track, or scene
Turn off the sound
MUTING.
temporarily
press it again or
VOLUME + to adjust
the sound vohlme.
Change a disc while playing
another disc
DISC SKIP
Play Ihe desired disc directly
DISC
Stop play and remove
desired disc
DISC 1-5 and =zxon the
unit or _ on the
standby
mode
Press
1/(_) while
standby
mode,
Ihe syslem
press
turns
than
you do not operate
30 minutes,
SYSTEM
2
Press
t,/4,
appears
repeatedly
@ or e.
Press
,I,/4, to select
to
setting
ON":
relnote.
1-
Replay
the previous
scene"
_b._, (instant
replay)
during playback.
turn
Briefly
current
fast forward
scene""
until "ILLUM
display,
MODE"
then
the
_,_ (instant advance)
during playback.
" DVD VIDEOs/DVD-RWs/DVD-Rs
only.
"" DVD VIDEOs/DVD-RWs/DVD-Rs/DVD+RWs/
DVD+Rs
press
• "ILLUM
You can
1-5 on Ihe unit.
MENU.
in the front panel
The delhult
the
R)r more
of the DISC
5 indicators
starts automatically.
the illumination
on or oft'.
Press
1-5
the system
the illumination
1
on. To cancel
To cancel,
l/Q) once.
To turn on/off the DISC
indicators'
illumination
When
for JPEG)
in the disc stocker but not
turns off if an unplayable
the
To
Resume
played back.
off: there is no disc.
operations
is underlined.
sets the ilhunination
only.
IN3
a setting.
ntode
• You may not be able to use the instant replay
instant advance f/inction
with
some
scenes.
or
on.
• "ILLUM
OFF":
sets
fl_e ilhunination
utode
About
DVD 5-DISC
changer
to off.
The disc changer
4 Press
@.
The setting
5 Press
stocker
is utade.
SYSTEM
The system
utenu
MENU.
turns
off.
which
and
the playing
For
example,
moves
consists
transports
of a playing
the discs
unit attd a
to the disc slot
unit.
if you
until the DISC
press
DISC
3 comes
the playing
unit attd then moves
the playing
unit.
3, the stocker
to the
position
the DISC
of
3 over
• Noise may come from the disc changer when
changing discs or turning the system on and off.
However, this is just noise produced by the operation
of the internal mechanisms
and does not indicate a
malflmction.
38us
Changing the input level of
the sound from connected
components
Distortion may occur when listening to a
component connected to the SAT/CABLE
.......
FUNCTION
or
TV jacks on the rear panel or to the AUDIO IN
jack on the [?out panel. This is nnt a malfunction
and will depend on the component
connected.
To prevent this, you can change the input level
t?om the sound nf the other components.
1
Press FUNCTION repeatedly until
"SAT/CABLE,"
"TV," or "AUDIO"
appears in the front panel display.
÷14,1÷, 0:)
...........................
SYSTEM
MENU
iiiiii
_!il
iiii
iiiiii
ill?
<!_
2
Press SYSTEM MENU.
3
Press'l"/4, repeatedly until
"ATTENUATE"
ii!;_
panel display,
!iii
4
appears
in the front
then press @ or ÷.
Press '1'/4,to select a setting.
The default setting is underlined.
• "ATT ON": attenuates
Selecting
the connected
component
The output
Ihe iupul level.
level is changed.
• "ATT OFF": normal input level.
You can use a VCR or other components
connected to the SAT/CABLE or TV jacks on
5
the rear panel. Refer to the operating instructions
supplied with the components fnr fimher
inlormatinu.
6
Press @.
The setting is made.
Press SYSTEM MENU.
The system menu turns off.
Press FUNCTION repeatedly until "SAT/
CABLE" or "TV" appears in the front panel
display.
Each time you press FUNCTION,
the system changes
DVD --+ TUNER
in the fnllowiug
FM --+ TUNER
the mode of
sequence.
AM --+ XM
--+ SAT/CABLE --+ TV --+ DMPORTI
DMPORT2 --+ AUDIO --+ ...
--+
m
•When you use both the SAT/CABLE (AUDIO IN)
jacks (analog connection) and SAT/CABLE
ICOAXIAL or OPTICAL DIGITAL IN)j ick (digital
connection) at the same time, the digital connection
takes priority.
3gus
You can enjoy TV or VCR sound from all the
speakers in this system.
For details, see "Step 2: Connecting
the System
and TV" (page 19), "Connecting the TV
(Advanced)" (page 30), and "Connecting Other
Components"
(page 34).
:;;::
_o--
FUNCTION
::!!:i_
_1]i]i
iii
SOUND
FIELD+/-
1
2
Press FUNCTION repeatedly until
"SAT/CABLE"
or "TV" appears in the
front panel display.
Press SOUND FIELD +/- repeatedly
until the sound field you want appears
in the front panel display.
When you want to output the TV sound or
stereo sound of a 2 channel source fl'om the
6 speakers, select the "PRO LOGIC." "PLI1
MOVIE," or "PLII MUSIC" sound field.
For details ot' sound field, see page 42.
40us
• When you set the [HDMI CONTROL] setting in
[CUSTOM SETUP] to [ON] (page 9//), the System
Audio Control function is activated and no sound
may be output from the TV. For details of the System
Audio Control lhnction, see the HDMI CONTROL
Guide (supplied separately).
• When you use both Ihe SAT/CABLE (AUDIO IN)
.jacks (analog connection) and SAT/CABLE
(COAXIAL or OPTICAL DIGITAL IN)jack (digital
connection) at the same time, the digital connection
takes priority.
You can choose a suitable
movies
sound mode for
1)1"music.
MOVIE/
M s,c
::
iiiii
ii:_
Press MOVIE/MUSIC
during playback.
Press MOVIE/MUSIC
repeatedly until the
mode you wmlt lights up in the fi'ont pmlel
display.
The delhult setting is underlined.
• AUTO: selects tile mode automatically to
produce the sound et]i:ct depending oii the disc
or sotlIld
• MOVIE:
stream.
provides tile sound l\>r movies.
• MUSIC: provides the sotmd for music.
• When the movie or music mode is selected,
"MOVIE"
or "MUSIC
' is displayed
in the front panel
display. When neither "MOV[E" or "MUSI(?'
displayed in the front panel display, "AUTO"
selected.
is
is
• Depending on the disc or source, when you select
"AUTO," the beginning of the sound may be cut off
as the optimum mode is automatically selected. To
avoid cutting the sound, select "MOVIE" or
"MUSIC."
41us
Soundfield
Display
HEADPHONETHEATER
HPTHEATER*
HEADPHONE
2CHANNELSTEREO
HP2CH
r, Use DCS Technology
You can take advantage of surround sound
simply by selecting one of the system's pre=
programmed sound fields. They bring exciting
and powerful sound of movie theaters into your
honle.
Automatic
outputting
original sound
of the
• AUTO FORMAT DIRECT STANDARD
Tile auto decoding function automatically
detects tile type of audio signal heing input
(Dolby Digital, DTS, or standard 2 channel
stereo) and perlbrms the proper decoding if
necessary. This mode presents the sound as it
was recorded/encoded, without adding ally
effects (e.g. reverberation).
However, if there are no low t>equency signals
(Dolby Digital LFE, etc.), it will generate a low
fl'equency signal fbr output to the subwoofer.
Outputting
the sound from
multiple speakers
• AUTO FORMAT DIRECT MULTI
This mode lets you enjoy audio playback
types of discs from multiple speakers.
Press SOUND FIELD+/-.
Press SOUND FIELD +/ repeatedly until tile
sound field you want appears ill the front panel
display.
All sound
field
Sound field
DIRECT
A.F.D.
STD
AUTO
DIRECT
A.F.D.
MULTI
FORMAT
MULTI
Pro Logic
II MOVIE
PLII MOVIE
Dolby Pro Logic
I1 MUSIC
PLII MUSIC
Surround
NEURAL
SUR
CINEMA
STUDIO
EX A
C. ST. EX A*
CINEMA
STUDIO
EX B
C. ST. EX B*
CINEMA
STUDIO
EX C
C. ST. EX C*
2 CHANNEL
42us
PRO LOGIC
Dolby Pro Logic
Neural
• The sound is not output from multiple speakers
depending on the source.
• Depending on the disc or souroe, the beginning of the
sound may be cut off as the optimum mode is
automatically selected. To avoid cutting the sound,
select "A.F.D. STD."
Display
AUTO FORMAT
STANDARD
Dolby
of all
STEREO
2CH STEREO
Outputting
2 channel sources
like CDs by 5.1channel
• Dolby Pro Logic
Dolby Pro Logic produces five output channels
fl'om 2 channel sources. This mode perl\lrms Pro
Logic decoding to the input signal and output to
front, center, and surround speakers.
Meanwhile, tile surround channel becomes
monaural.
• Dolby Pro Logic II MOVIE/MUSIC
Dolby Pro Logic II produces five full=bandwidth
output channels from 2 channel sources. This is
done using an advanced, high=purity matrix
surround decoder that extracts the spatial
Studio
Reproduces the sound ctmracteristics of the
Sony Pictures Entertainment "Cary Grant
Theater" cinema production studio. This is a
standard mode, great li)r watching most arty type
of movie.
properties of the original recnrdiug without
adding any new sounds or tonal colorations.
• When the input signal is multi channel source, Dolby
Pro Logic and Dolby Pro Logic 11MOVIE/MUSIC
are canceled and the multi channel source is output
directly.
• When the bilingual broadcast sound is input, Dolby
Pro Logic and Dolby Pro Logic 11MOVIE/MUSIC
are not effective.
Outputting
XM radio signals
the multi channel surround
format
• CINEMA STUDIO EX A (Cinema
EX A)
in
• CINEMA STUDIO EX B (Cinema Studio
EX B)
Reproduces tire sound characteristics
of the
Sony Pictures Entertainment "Kim Novak
Theater" cinema production studio. This mode
is ideal ti>r watching science-fiction
or action
movies with lots of sound efli:cts.
• CINEMA STUDIO EX C (Cinema
EX C)
Studio
Reproduces the sound characteristics
of the
Sony Pictures Entertainment scoring stage. This
_0
o
e,
o.
&
e-
3
ID
mode is ideal fi_r watching musicals or classic
fihns where music is li:atured in the soundtrack.
• NEURAL SURROUND
The system outputs signals in the multi channel
surround l\_rmat when the system receives an
XM Radio surround broadcast. When the system
receives a stereo broadcast, tile stereo sound is
emphasized.
• NEURAL SURROUND is activated as a PCM signal
or 2 channel analog signal. The NEURAL
SURROUND processing will be turned off
automatically when another type of signal is input.
The beginning of the sound may be dropped ()titwhen
Ibis processing is turned on/off. In this case, the sound
field is set to "A.F.D. STD" automatically.
Enjoying
Sound
About
DCS
Digital
(Digital
Cinema
Cinema
Sound)
In colhthoratiou
with Sony Pictures
Eutertainmetu.
Sony measured tile sound
emironment
of Iheir studios arrd integrated
Ihe
data of Ihe measurenlent and Snny's own DSP
(Digital Signal Processor) technology to
About Cinema
Studio
EX
Cinema Studio EX is ideal lor enjoying movie
software encoded with multi channel format,
such as the Dolby Digital DVD. This mode
reproduces tire sound characteristics of Sony
Pictures Eutertainnrent's studios.
Cinema Studio EX consists of the l\_llowing
three elements.
• Virtual Multi Dimension
Creates five sets of virtual speakers
surrounding the listener from a single pair of
actual surround speakers.
• Screen Depth Matching
In a movie theater, sound seems to come fi'om
inside the image reflected on the movie screen.
This element creates the same sensation ill
your listening room by shifting tile sound of
the front speakers "into" tile screen.
• Cinema Studio Reverberation
Reproduces tile reverberations peculiar to a
movie theater. Cinema Smdin EX is tile
ituegrated mode which operates these
elements sinmltaneously.
dex elop "Digital Cinema Sound." "Digitul
Cinema Sound" simulates in a home theater an
ideal movie Ihealer sound environment based on
the preference
ol Ihe movie director.
continued_
43us
m
• The virtual speaker effect may cause increased noise
in the playback signah
• When listening with sound fields that employ virtual
speakers, you will not be able to hear any sound
coming directly lron/the surround speakers.
You can enjoy multiplex broadcast sound when
the system receive or play the Dolby Digital
Using only the front speaker
and subwoofer
• 2 CHANNEL
(DUAL MONO)
multiplex
broadcast
signal.
STEREO
This mode outputs the sound fi'om the fi'ont lefl
and right speakers and subwoofcr.
Standm'd 2
channel (stereo) sources completely bypass tile
sound field processing. Multi channel surround
limnats are dowmnixed to two channels.
• To receive the Dolby Digital signal, you need to
connect a digital s itellite tuner to the unit with an
optical or coaxial digital cord (page 34) and set the
digital output mode of the digital satellite tuner to
Dolby Digital.
This allows you to play any source using only
tile front left and right speakers and subwoofcr.
Enjoying the surround
by headphones
• HEADPHONE
iiii
iil
iiii :i!!: iiiii
sound
iii!>
:i_ iiiii
ii
:i:i i_
THEATER
from
This mode outputs the sound as surround
headphone L/R.
This l'uucdou is based on "Digital Cinema
Sound" technology.
• HEADPHONE
2 CHANNEL
STEREO
This mode outputs the sound fi'om headphone
R. Standard 2 channel (stereo) sources
L/
completely bypass the sound field processing.
Multi channel surround l\_rmats are downmixed
Press AUDIO.
to two channels.
To turn the
surround
effect
off
Press SOUND FIELD +/- repeatedly until
"A.F.D. STD" or "2CH STEREO" appears in
tile front panel display.
Press AUDIO
repeatedly
until tile signal you
want appears in the front panel display.
Tile default setting is underlined.
• "MAIN":
Sound of the main language
• "SUB": Sound of the sub language
• The system memorizes Ihe last sound field selected
for each fimction mode.
Whenever you select a function such as DVD or
TUNER, the sound field that was last ipplied to
function is automatically apiHied again. For example,
if you listen to DVD with PRO LOGIC as the sound
fiel& then change to another fimction, and Iben return
to DVD, PRO LOGIC will be applied again.
44us
will be
output.
output.
• "MAIN+SUB":
will be
Mixed sound of both the main
and sub languages
will be output.
With each press, playback speed becomes
fasler.
Watching
frame by frame
(Slow-motion
Play)
(DVD VIDEO,
CD only)
(Scan,
Slow-motion
Play,
Freeze
Frame)
_
Press <|/ql_l
DVD-R,
DVD-RW,
or lu,,-I_alm,-\_,rben the system is in
pause mode. To return to normal playback
_rn
_
mnt_ _
You can quickly locate a particulm" point on u
disc by monitoring the picture or playing back
speed, press D>. Each time you press -411/_1_1or
_/111_ during Slnw-motion Play, the playback
speed changes. Two speeds are available. With
each press the indication changes as lollows:
Playback direction
2 I_- _
I m_-
slowly.
O
€-,
• Depending en the DVD/VIDEO CD, you may net be
able te de some ef the operations described.
Opposite direction (DVD VIDEO
2 <l *_ I -,_11
Locating a point quickly by
playing a disc in fast forward
or fast reverse (Scan)
Playing
(Freeze
(Except
for JPEG)
one frame
Frame)
(DVD VIDEO,
CD only)
DVD-R,
only)
-rl
€-,
-,,I
at a time
DVD-RW,
VIDEO
"o
-,,I
Press _1/_1_1 or lu,q_/|_
while playing a disc.
When you find tile point you want, press Ii:::>to
return to normal speed. Each time you press <1/
or _Rl,_- during scan, the playback speed
changes. With each press the indication changes
as shown below. Actual speeds may differ with
some discs.
Playback
VIDEO
When tile system is in the pause mode, press
o,,_ to go to the next frame. Press <,,, to go to
tile preceding frmne (DVD VIDEO/DVD-R/
u.
u}
o
DVD-RW only). To return to nomml plwback.
press I2>.
• You cannet search for a still picture on a DVD-R/
DVD-RW in VR mode.
direction
x21_----_ 11_1_---_21_1_---_31_1_
t
I
31_.1_(DVD VIDEO/DVD-VR mode/VIDEO CD
only)
×21b-(DVD VlDEO/CD only)
Opposile
direction
x2< ---_ 1_
t
---_ 2<1<1---_ 3",<1<1
I
3_1_1(DVD VlDEO/DVD-VR mode/VIDEO CD
only)
x2< (DVD VIDEO only)
45us
Press @.
3
[,-r_(*,_)] changes to [-
You can search a DVD by litle or chapter,
and
you can search a VIDEO CD/CD/DATA
CD/
DATA DVD by track, index, or scene. As tides
4
Press t'/+ or the number buttons to
select the title, chapter, track, index,
scene, etc., number you want to search
for.
and Iracks are assigned unique numbers on the
disc, you can select the desired one by entering
its number. Or, you call search lk_r a scene using
the time code.
If you
Press d9 DISPLAY. (When playing a
DATA CD/DATA DVD with JPEG image
files, press © DISPLAY twice.)
depending
items
The system starts playback fi'om the
selected number.
To
on Ihe disc.
[TITLE],
[CHAPTER],
[SCENE]
[INDEX]
Ille time code.
the
and
only)
[TIME/TEXT].
2 Press @.
3 Input the time code using the number
[ALBUM]
buttons,
[FILE]
(.'.-r_refers to a rmmber).
The number in parentheses
then press
For example,
Example: when you select
[CHAPTER]
[':* (**)] is selected
mode
using
VIDEO
IT '_'_:*"::
"'q changes to IT --:--:--].
{:{{:
IN: ::] [TRACK]
}?_1
DVD-VR
a scene
(DVD
[T 'w2* '_:'_'q (playing time of the current title)
is selected.
Io search R_r a
starting point by inputting
for
code
1 In Step 2, select
ITIME/TEXT1
Select [TIME/TEXT]
search
time
[TRACK],
a mistake
Press @.
Press ,I,/4, to select the search method.
The display will show different
make
Cancel tile nnmber by pressing (-'LEAR,
then select another number.
The Control Menu display appears.
2
I*'_)].
indicates
@.
to find the scene at 2 hours.
10
minutes, and 20 seconds after the beginning,
just enter [2:10:20].
the
total number ol titles, chapters, tracks,
indexes, scenes, albums or files.
• When the Control Menu display is turned off, you can
search ff)r a chapter (DVD VIDEO/DVD-R/DVDRW) or track (VIDEO CD/CD) by pressing the
number buttons and @.
• You cannot search for a scene on a DVD+RW using
the time code.
Selected row
46us
(Picture Navigation)
You can divide the TV screen into 9 subscreens
and find the desired scene quickly.
1
(Resume Play)
Press PICTURE NAVI during playback.
The following display appears.
When
CHAPTER VIEWER _ [ENT_ 1
you
the point
appears
stop the disc,
where
the system
you pressed
in the ['ronl
panel
•
remembers
and "RESUME"
display.
As long
as
you do not remove the disc, Resume Play will
work
2
Press
select
PICTURE
an item.
NAVI
repeatedly
1
enters
standby
mode
by
O
e..
While
playing
a disc,
press
•
to stop
e..
-..I
playback.
"RESUME"
appears
panel
in the front
display.
only)
•
syslem
I/(_).
to
• [TITLE VIEWER] (DVD VIDEO only)
• [CHAPTER VIEWER] (DVD VIDE()
[TRACK VIEWER] (VIDEO
Super
3
e'_en ilthe
pressing
VCD
Press
lt' "RESUME"
CD/
Play
only)
2
@.
does
not appear,
Resume
"O
is not ax ailable.
Press
_>.
-..I
The first scene of each title, chapter, or
The system starts playback from Ihe point
track
where
appears
as Ionov,,,s.
you
stopped
1he disc
in Step
u.
1.
o
ii1
2
3
• Depending on where you stop Ihe disc, the syslem
may nol resume playback frolil exactly tile same
6
• The poinl where you slopped
when:
poinl.
4
5
playing
may be cleared
you eject the disc.
the syslem enlers standby
mode (DATA
CD/
DATA DVD only).
4
Press <-./,I,/4,/.+to select a title, chapter,
or track, and press @.
The system starts playback
selected scene.
To return
setting
to normal
from the
play during
Press o*%RETURN.
you change
Display.
or resel the settings
on the Selup
you change
Ihe parenlal
conlrol
leveh
you change
Ihe function
by pressing
you disconnect
• For DVD-Rs/DVD-RWs
in VR mode,
VIDEO
CDs,
CDs, DATA CDs, and DATA DVDs, the syslem
remembers Ihe resume playback poinl for Ihe currenl
disc.
• The resume point is cleared when
disc.
• Depending on Ihe disc. you may nol be able to select
some items.
FUNCTION.
Ihe AC power cord (mains lead/.
• Resume
Shuffle
Plly does not work during
you select anolher
Program
Play and
Play.
• This function
discs.
may nol work properly
wilh some
continued_
47us
• To play from the beginning of the disc. press • twice.
then press E;>.
To
enjoy
a disc
before
(Multi-disc
(DVD
that
by resume
VIDEO,
is played
playback
(Program
Play)
Resume)
VIDEO
CD only)
You can play the contents of a disc ill the order
This system stores tile point where you stopped
tile disc l\)r up to 40 discs and resumes playback
you want by arranging the nrder of the tracks on
the disc to create your nwn program. Yon call
the next time you insert the same disc. If you
store a resume playback point lot the 41st disc,
the resume playback pnint li_>rthe first disc is
deleted.
prngram
To activate this fnnction, set [MULTI-DISC
RESUME] ill [CUSTOM SETUP] to [ON]. Fnr
details, see "[MULTI-DISC
RESUME] (DVD
V1DEO/V1DEO
CD only)" (page 91).
up to 99 tracks.
• You can program the track on the current disc only.
1
Press L_ DISPLAY.
The Control Menu display appears.
2
Press 'I'/4, to se ect
[PROGRAM],
then press @.
The options for IPROGRAM]
appear.
• To play from the beginning of the disc. press • twice,
then press D:>
• If [MULTI-DISC RESUME] in [CUSTOM SETUP]
is set to [OFF] (page 91), the resume point is cleared
when you change the function by pressing
FUNCTION.
Press ,I,/4, to select [SET --+], then
press @.
[TRACK] is displayed when you play a
VIDEO CD or CD.
Tracks recorded
on a disc
48us
Total time of the
programmed tracks
4
Press
The
").
To change
cursor
this case,
moves
to ll_e track
row
[TI (in
I/)lI).
PROGRAM
or cancel
a program
1 Follow steps 3 to 3 of "Creating Your Own
Program."
2 Select the program number of the track you
want to change or cancel using ,I,/4,
0:00:00
T
If you want to delete tile track from tile
program, press CLEAR.
3
Follow Step 5 for new programming.
To cancel a progranl,
then press @.
5
Select
the track
For example,
you
select
Press
'1"/4, to select
press
@.
want
track
to program.
102].
To cancel
programmed
[02] under
[T], then
Selected track
all
select [--] under [T],
of the
tracks
in the
order
1 Follow steps 1 to 3 of "Creating Your Own
Program."
o
2 Press t, and select [ALL CLEAR].
"11
3
3 Press @.
PROGRAM
g
(_15-3_)7_,
T
--!
] 2. TRACK
"o
__.
Total time of the programmed
6
tracks
To program other tracks, repeat steps 4
to 5.
The programmed tracks are displayed in the
selected nrder.
7
Press I_> to start Program
Program
Play.
Play starts.
When tile program ends, ynn can restart tile
same program
To return
to
again by pressing
normal
17;:>.
play
In Step 3, press CLEAR or select [OFF]. To play
tile same program again, select [ON] in Step 3
and press @.
To turn
off
the
Control
Menu
display
Press Q DISPLAY
repeatedly
until tile Control
Menu display is turned off.
4gus
To
return
to
normal
In Step 3, press CLEAR
(Shuffle
Play)
To
turn
off the
play
or select [OFF].
Control
Menu
display
You can have flae system "shu['fle" Iracks.
Subsequel]l "shuffling" may produce a different
playing
Press C3 DISPLAY
repeatedly
until tile Control
Menu display is turned off.
order.
• You cannot use this fimction with VIDEO CDs and
• Same song may be played repeatedly during MP3
playback.
• You can shuffle Ihe tracks on the currenl disc only.
1
Press C_ DISPLAY during playback.
Tile Control Menu display appears.
2
Press '1"14,
to select
[SHUFFLE],
then press Q.
The oplions
3
for [SHUFFLE]
appear.
Press t,14, to select the item to be
shuffled.
• When playing a VIDEO CD or CD
• [TRACK]: shuffles tracks on the disc.
• When Program Play is activated
• ION]: shuffles tracks selected in Program
Play.
• When playing a DATA CD or DATA
DVD
• ION (MP3)]: shuffles MP3 audio tracks in
the album on the current disc. When no
album is selected, the first albmn will play
in random order.
m
• A track already played is also selected in
random
4
ordcr.
Press Q.
Shuffle Play starts.
50us
Super VCDs wilh PBC pla}q_ack.
(Repeat
• When playing a DATA CD or DATA
DVD
• IOFF]: does not play repeatedly.
• [ALL DISCS]: repeats all of tile discs.
• lONE DISC]: repeats all of the albums on
the current disc.
Play)
• [ALBUM]: repeals the current album.
• [TRACK] (MP3 audio tracks only):
repeats the current track.
Yon can play all the lilles, tracks or a]bun3s on a
disc or a single lit]e, chapter, m,ck, or a]bmn
repeatedly.
You can use a combinalion
of Shul fle or
4
Program Play modes.
1
2
Press @.
The item is selected.
Press © DISPLAY during playback.
To return
The Conlrol Menu display appears.
In Slep 3, press CLEAR
Press ,I,14,to select
To turn
[REPEAT],
to normal
off
the
play
or select
Control
IOFF].
Menu
%
O
,_n
then press @.
display
The options for [REPEAT]
appear.
-n
r-
Press Q DISPLAY
repeatedly
until tile Control
Menu display is turned off.
"'_.
rr_
• You cannot use this ['llnclion wilh VIDEO CDs and
Super VCDs with PBC playback.
• When playing a DATA CD/DATA DVD which
3
Press i,/4, to select the item to be
repeated.
contains MP3 audio track and JPEG image files, and
Iheir playing time is nol Ihe same, the audio sound
will nol malch the image.
• When [MODE (MP3, JPEG)] is set Io [IMAGE
(JPEG)] (page 62)_ you cannol selecl [TRACK].
O"
"O
_"
,<
-_'
_.Q
__.
O
{n
The default setting is underlined.
• When playing a DVD VIDEO or DVDVR
• _:
does nol play repeatedly.
• [ALL DISCS]: repeats all of the discs.
• lONE DISC]: repeats all of the titles on
the current disc. (When playing a DVDVR, lONE DISC] repeats all of the titles
of the selected type.)
• [TITLE]: repeats the currem title on a
disc.
• [CHAPTER]:
repeats the currem chapter.
• When playing a VIDEO CD or CD
• [OFF]: does not play repeatedly.
• [ALL DISCS]: repeats all of the discs.
• lONE DISC]: repeats
the current disc.
• [TRACK]:
all of the tracks on
repeats tile current track.
51vs
i::_iii
iii_!iii_!!i_iiii
;;{!I¸
;iiilii;i;i;i!i
i_iiiil;i
i!iiiiiil
iiiliiiii!iiii{!i
¸;iiiiii!_ii_iiiii_;
iii¸¸¸¸
;::i:i<i!i;ili
iii!]iiii;i
!i!i_ii!:i!
;:¸¸¸iii_i!_i_i!_
_:!i
¸¸¸¸;
!_!
_!;
__ii!!!ii!ii!ij!i_i!ii_:il
;ii!ii{i]il
iiiiii_i!_i_!iii
¸;<!i:¸¸¸¸;¸i¸¸::
ii]i!i!ii]i;]!i_i:?i
iiiii]!iiiiiiiiiiii
U!Iiiiiiiiiiiiiiiill
iiiiiiiiiiiiii
iiiiiiiiii
iiiiiiiiii
iiiiiiiiiii
iiiiiiii
iii
iiiiiiiiii
iii
iiiiiiii
iiiiiiii
iii
iiiiliii
iii
ilili!i
!!iiiiii!i
!
|||||
A DVD is divided
into a lot of sections,
which
make up a picture or music feature. These
sections are called "titles." When you play a
When playing a DVD VIDEO recorded in
multiple audio R)rmats (PCM, Dolby Digital,
DVD which contains several titles, you can
select the title you want using DVD TOP
MENU.
MPEG audio, or DTS), you call change tile
audio format. If the DVD VIDEO is recorded
When you play DVDs that allow you to select
with multilingual
language.
items such as the language
With VIDEO CDs, CDs, DATA CDs, or DATA
l\)r the subtitles and
tracks, you call also change the
tile language ['or the sound, select these items
using DVD MENU.
DVDs, you can select tile sound l'rom the right or
left channel and listen to the sound of the
1
selected channel throngh
speakers.
Press DVD TOP MENU or DVD MENU.
The disc's menu appears on the TV screen.
The contents of the menu vary li'om disc to
disc.
2
1
both the right and left
Press AUDIO during playback.
The following
display appears.
Press <.-/,t,/,v/->or the number buttons to
select the item you want to play or
change.
3
Press @.
1 :ENGLISHDOLBYDIGITAL3/2.1 I [
Press AUDIO repeatedly to select the
desired audio signal.
• When playing a DVD VIDEO
Depending on the DVD VIDEO, tile choice
of language varies.
When lklur digits are displayed, they
indicate a language code. Refer to
"Language Code List" (page 1{)7)to see
which language the code represents. When
the same language is displayed two or more
times, the DVD VIDEO is recorded in
multiple audio l'ormats.
• When playing a DVD-VR
The types of SOUlldtracks recorded on a disc
are displayed. The default setting is
underlined.
Example:
[1: MAIN] (main sound)
[1: SUB] (sub sound)
[1: MAIN+SUB] (main and sub sound)
[2: MAIN]
[2:SUB1
[2: MAIN+SUB]
52us
• When playing a DVD
m
• 12: MAIN], 12:SUB], and 12: MAIN+SUB] de
not api_earwhen one audie StlealIl is recorded on
the disc.
• When playing a VIDEO CD, CD, DATA
CD (MP3 audio), or DATA DVD (MP3
audio)
The default setting is underlined.
• [STEREO]:
the standard
Example:
Dolhy Digital 5.1 ch
Surround
LFE (Low
Frequency
(L/R)
Effect)
stereo sound
• [I/L]: the souud of the left channel
(monaural)
• [2/R]: the snund of the right channel
(monaural)
• When playing a Super VCD
The default setting is uuderlined.
• [1 :STEREO] : the stere() sound of the
audin track 1
• [I:I/L]:
Currently playing
program format
o
Example:
€-
Dolhy Digital 3 ch
€-
the sound of the left channel of
the audio track 1 (monaural)
#
Surround
(Monaural)
Front (L!R)
• [I:2/R]: the sound of the right channel of
the audio track 1 (monaural)
• [2:STEREO]: the stereo sound of the
audio track 2
• [2:l/L]:
"o
the sound nfthe left channel of
the audio track 2 (monaural)
Currently playing
program format
• [2:2/R]: the sound of the right channel of
the audio track 2 (monaural)
About
• While playing a Super VCD on which the audio track
2 is net rccerded, ne sound will come out when yeu
select [2:STEREO], [2:I/L], er [2:21R1.
Checking
format
the audio
signal
(DVD only)
If you press AUDIO repeatedly during
playback, the format of the current audio signal
(PCM, Dolby Digital. DTS. etc.) appears as
shown below.
audio
o
signals
Audio signals recorded in a disc contain the
sound elements (channels) showu belnw. Each
channel is output from a separate speaker.
Front (L)
Front (R)
Center
Surround (L)
Surround (R)
Surround (Monaural): This signal can be either
the Dnlby Surround Sound processed signals
or the Dolby Digital sound's monaural
Surround audio signals.
• LFE (Low Frequency Efli:ct) signal
53us
Some DVD-Rs/I)VD-RWs
in VR (Video
Recording) mode have two types of titles li_r
playback: nriginally recorded titles
([ORIGINAL])
and titles that can he created nn
Viewing the playing time and
remaining
time in the front
panel display
recnrdable
Ynu can check disc inl_)rlnation,
LIST]).
played.
1
DVD players lot editing ([PLAY
You can select the type of title to be
Press O DISPLAY when the system is
in stop mode.
Press t,14,to select
such as the
time, total number of titles in a DVD,
tracks in a VIDEO CD, CD, or MP3 using the
front panel display (page 110).
Press DISPLAY.
Tile Control Menu display appears.
2
remaining
[ORIGINAL/
Each time you press DISPLAY while playing
the disc, the display changes (_) --+ @ --+ ...
PLAY LIST], then press @.
The options l\*r [ORIGINAL/PLAY
LIST]
appear.
Snme displayed
seconds.
items may disappear
after a few
When playing a DVD VIDEO
DVD.R/DVD.RW
3
4
Press ,I,/4.,to select a setting.
The default setting is underlined.
• [PLAY LIST]: plays the titles created
from [ORIGINAL] R)r editing.
• [ORIGINAL]: plays the titles originally
recorded.
Press @.
or
@ Playing time and numher of the current title
@ Remaining time of the current title
@ Pluying time and number of the current
chapter
(_) Remaining time of the current chapter
(_) Disc name
(_) Title and chapter
When
(without
(_) Plying
playing
PBC
a VIDEO
CD
functions)
or CD
time of the current
track
@ Remaining time of the current track
@ Playing time of the disc
(_) Remaining time of the disc
(_) Disc name
(_) Track and index*
" VIDEO CD only.
When
audio)
playing
or DATA
a DATA
DVD
CD (MP3
(MP3
audio)
@ Playing time and current track number
@ Track (file) name
54us
• When playing VIDEO CDs with PBC fimctions, the
playing time is displayed.
• When playing a VIDEO CD (without
PBC functions)
or CD
Playing time of the current track
• The system can only display the first level of the
DVD/CD text, such as the disc name or title.
Remaining
• If an MP3 file name cannot be displayed, "'_" will
appear in the front panel display instead.
• The disc name or trick name may not be displayed
depending on the text.
• Playing time of MP3 audio tracks may not be
displayed correctly.
Checking
remaining
the playing
time
time of the current track
Playing time of the current disc
Remaining
time of the current
disc
• When playing a DATA CD (MP3
audio) or DATA DVD (MP3 audio)
time and
Playing time of the current track
#
%
O
€-
You can check the playing
time and remaining
time of the current title, chapter, or track, and tile
total playing time or remaining time of the disc.
You can also check the DVD text and MP3
lolder name/file
1
name recorded
in the disc.
• Characters/marks may not be displayed for some
languages.
• Depending on the type of disc being played, the
system can only display a limited number of
characters. Also, depending on the disc, not all text
characters will be displayed.
Press DISPLAY during playback.
Checking the play information
of the disc
The l\41owing display appears.
To check
Time information
2
€-
DVD/CD
text
Press DISPLAY repeatedly in Step 2 to display
text recorded ill the DVD/CD.
Press DISPLAY repeatedly to change
the time information.
The display and tile kinds of time that you
The DVD/CD
"o
g}
o
g_
text appears only when text is
recorded ill tile disc. You cannot change the text.
If the disc does not contain text, "NO TEXT"
appears.
can check depend on the disc you are
playing.
• When playing a DVD VIDEO or DVDRW
[BRAHMS SYMPHONY
[
Playing time of the current title
To check
Remaining
time of the current
title
(MP3
DATA
audio)
By pressing DISPLAY
Playing time of the current chapter
Remaining
time of the current chapter
• When playing a VIDEO CD (with PBC
functions)
CD/DATA
DVD
text
while playing MP3
audio tracks on a DATA CD/DATA DVD. you
can display the name of the album/track, and the
audio bit rate (the amount of data per second of
the current audio) on your TV screen.
Playing time of the current scene
continued_
55us
Bit rate*
|
If various angles (multi-angles) Rlr a scene are
recorded on a DVD VIDEO, you can change the
viewing
Press
Each
Album name
"
Checking
the date
information
only)
You can check tile date information during
playback when tile Exif '> tag is recorded in the
JPEG image data.
Press O DISPLAY twice during playback.
Tile Control Menu display appears.
!
"
"Exchangeable
hnage File Format" is a digital
camera mmge fimnat defined by the Japan
Electronics
Association
and Information
dElTA).
Technology
lMustries
• Date information is [MM/DD/YYYY].
MM: Month
DD: Dly
YYYY: Year
• Date information varies depending on the area.
56us
ANGLE
time you
during
press
playback.
ANGLE,
the angle
changes.
Track name
Appears when playing an MP3 audio track on
DATA CDs/DATA
DVDs.
(JPEG
angle.
• Depending on the DVD VIDEO, you may not be able
to change the angle even if multi-angles are recorded
on the DVD VIDEO.
If subtitles are recorded
on a disc, you can turn
the subtitles on or off while playing. If
multilingual subtitles are recorded on the disc.
you can change the subtitle language while
playing, or turn the subtitles on or off whenever
(A/V S YNC)
|||
you want.
When the sound does not match the pictures on
the TV screen, you can adjusl the delay belween
Press SUBTITLE during playback.
the picture and sound.
Each time you press SUBTITLE,
language
the subtitle
1
changes.
Press 0. DISPLAY.
The Control Menu display appears.
Press 'I"/4,to select
• Depending on the DVD VIDEO, you may not be able
to change the subtitles even if multilingual subtitles
are recorded on it. You also may not be able to turn
Ibem off.
[A/V SYNC],
then press @.
The options for [A/V SYNC] appear.
%
0
€u)
"rl
€-
OFF
_j
,_
Press ,I,/4, to select a setting.
u)
o
u)
The default setting is underlined.
•[OFF]: does not adjust.
• [ON]: adjusts the dif[i:reuce between
picture and sound.
4
Press @.
• Depending on the input strcam_ this function may not
be effective.
57us
MP3 audio track or JPEG
image file that the system
play
can
You can play the MP3 audio tracks or JPEG
image files:
What
is MP3/JPEG?
MP3 is audio compression teclmology that
satisfies the 1SO/MPEG regulations. JPEG is
image compression
technology.
Discs that the system
play
can
You can play back DATA CDs (C[)-ROMs/CDRs/CD-RWs) or DATA DVDs (DVD-Rs/DVDRWs/DVD+Rs/DVD+RWs/DVD-ROMs)
recorded in MP3 (MPEGI Audio Layer 3) or
JPEG R_rmat. However, tire DATA CDs must be
recorded according to 1SO 9660 Level 1, Level
2 or Joliet R>rmat and DATA DVDs of Universal
Disk Format (UDF) for the system to recognize
the tracks (or files). You can also play discs
recorded in Multi Session.
See the operating irrstrucdons supplied with the
C[)-R/CD-RW
or DVD-R/DVD-RW
drives and
tire recording software (not supplied) for details
on the recording fi_>rmat.
About
the
Multi-Session
disc
If MP3 audio tracks or JPEG image [_les are
recorded in the t_rst session, the system will also
play MP3 audio tracks or JPEG image files in
other sessions. If audio tracks and images in
audio CD fi_>rmator vide(> CD tk)rmat are
recorded
in the first session,
only the first
session will be played back.
• The system may not be able to play some DATA
CDs/DATA DVDs created in the Packet Write
format.
58us
• which have the extension
".MP3" (MP3 audio
track) or ".JPG"/".JPEG"
(JPEG image file)
• which conl_arm lo the DCF* image t_le l\_rmat
" "Design rule R_rCamera File system": Image
stand irds for digital cameras regulated by Japan
Electronics and Information Technology Industries
Association (JEITA).
ra'a_
• The system will play arty data with the
extension ".MP3," ".JPG," or ".JPEG" even if
they are not in MP3 or JPEG l\>rmal. Playing
this data may generate a loud noise which
could damage your speaker system.
• The system does not conform
MP3PRO format.
to audio in
Playback
order of MP3 audio
tracks or JPEG image files
The playback order of MP3 audio Iracks o1"
JPEG image files recorded on a DATA CD or
DATA DVD is as follows:
• Structure of disc contents
Tree 1
Tree 2
Tree 3
Tree 4
Tree 5
• If you add numbers (0l, 02, 03, etc.) to the front of the
track (or file) names when you store the tracks (or
files) in a disc, the tracks (or files) will be played in
that order.
• A disc with many trees takes longer to start playback.
• Playback order may differ from the illustration
depending on the sofiware you use to create the
DATA CD or DATA DVD, or if there are more than
200 alhums and 300 files in each album.
• The system can recognize up to 200 albums, and will
not play any albums beyond the 200th.
• The system may take longer time to playback, when
progressing to the fi)llowing album or jump to other
album.
• Some type of JPEG files cannot be played.
#
%
O
1"11
1-
o
D
Album
Track (MP3 audio) or
File (JPEG image)
When you insert a DATA CD or DATA DVD
and press L::>. the numbered tracks (or files) are
played sequentially, l_'om @ through (Z). Any
sub=albums/tracks
(or files) contained within a
currently selected album take priority over the
next album in the same tree. (Example:
contains 1_ so @ is pluyed before (_).)
When you press DVD MENU
and the list of
album names appears (page 60), the album
names are arranged in tbe l\>llowing order:
t_ --+ _ --+ _ --+ 1_ --+ _ --+ _. Albums
that do not contain
tracks (or files) (such as
album (_) do not appear in the list.
5gus
To stop playback
Press m.
To
play
audio
the
next
or previous
MP3
track
Press _/IHH.
Note that you can select the
next album by continuing to press _
al:er the
last track on tlre current albmn, but that you
NNNI m_m_
Selecting
or album
1
cannot return to the previous album by pressing
. To return to the previous album, select tire
album from the album list.
an MP3 audio track
To return
Load a DATA CD or DATA DVD.
The allmms recorded
on the DATA CD or
DATA DVD appear, When an album is
to the
previous
display
Press 0*%RETURN.
To turn off the display
Press DVD MENU.
being played, its title is shaded.
Selecting
album
3( 3o1
1
FAVOURITE
a JPEG image file or
Load a DATA CD or DATA DVD.
SONG
The albums recorded
on the DATA CD or
DATA DVD appear. When an album is
being played, its title is shaded.
2
3(30)
Press ,I,/4, to select an album.
• When selecting an album
Press I2::>to start playing the selected
albmn.
• When selecting a track
Press @.
The list of tracks contained
in the albun_
appears.
_MY
FAVOURITE
SONG
1(256)
WALTZ
FOR
DEBBY
Press 4"/4, to select a track and press @.
The selected track starts playing. You can
turn the track list off by pressing DVD
MENU. Pressing DVD MENU again will
display the album list.
60us
MY
FAVOURITE
SONG
2
Press ,I,/4, to select an album.
To rotate
• When selecting an album
Press I2:> to start playing the selected
alhmn.
When a .1PEG image file is displayed on the TV
screen, you can rotate the image by 90 degrees.
• When selecting
an image
Press PICTURE NAV1.
hnages of files ill tire album appear in 16
a JPEG
image
Press 'I"/4, while viewing all image. Each time
you press "1",the image rotates counterclockwise
by 90 degrees.
Example of when you press 'I" nnce:
Rotating direction
subscrcells.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
o
e'11
e-I
Press @/'1"/4,/÷ to select the image you want
Press CLEAR
to view and press @.
To stop
to return to normal view.
playback
Press I.
"o
•A scroll box is displayed
at the right side of the TV
-I
screen. To display the additional image files, select
Ihe bottom image and press "1".To return to the
previous image, select the top image and press q'.
To play the
image
next
or previous
t_
o
JPEG
file
Press €/-) when the Control Menu display is not
displayed. Note that you can select the next
album by continuing to press @ al:er tire last
image on the current album, but that you cannot
return to the previous album by pressing ¢e. To
return to the previous album, select the album
lix)m the album list.
61us
Press ,I,/4, to select the album you want
and press [2>.
The system starts playing the selected
album.
You can turn the albmn list on and off by
pressing DVD MENU repeatedly.
You can play a slide show with sound by first
placing both MP3 and JPEG files ill tile same
album on a DATA CD or DATA DVD. When
you play back the DATA CD or DATA DVD,
select IAUTO] mode as explained below.
1
2
Load a DATA CD or DATA DVD.
m
Press U_'_DISPLAY when the system is
in stop mode.
The Control Menu display appears.
3
• When you select [AUTO], the system can recognize
up to 300 MP3 tracks and 300 JPEG files in a single
album. When you select [AUDIO (MP3)] or [IMAGE
IJPEG)], the system can recognize up to 600 MP3 or
600 JPEG files in a single album. A maximum of 200
albums can be recognized regardless of the selected
mode.
Press t'/4, to select
[MODE
(MP3, JPEG)], then press @.
The options
for [MODE
(MP3..1PEG)]
• If you set [MODE iMP3, JPEG)] to [IMAGE
(JPEG)] on a disc that contains MP3 tracks only or
[AUDIO (MP3)] on a disc that contains JPEG files
only, you may not be able to change the [MODE
(MPL JPEG)] setting.
• PICTURE NAVI does not work when [AUDIO
IMP3)] is selected.
• If you play large MP3 track data and JPEG image
data at the same time, the sound may skip. It is
recommended that you set the MP3 bit rate to 128
kbps or lower when creating the file. If the sound still
skips, then reduce the size of the JPEG file.
appear.
AUTO
Specifying
duration
(JPEG
4
Press t'/4, to select a setting.
The default setting is underlined.
• _:
plays both the JPEG image liles
and MP3 audio tracks in the same album
as a slide show.
• [AUDIO
(MP3)]:
plays only MP3 audio
tracks continuously.
• [IMAGE
(JPEG)]:
plays only JPEG
image files as a slide show.
5
6
Press @.
Press DVD MENU.
The list of albums recoMed on the DATA
CD or DATA DVD appears.
62us
the slide show
only)
When ynu play JPEG image files using slide
show, you can specify the duration for slides Io
appear on Ihe TV screen.
1
Press C_ DISPLAY twice.
The Control Menu display appears.
2
Press 'I'/4, to select
[INTERVAL],
then press C)"
The options for [INTERVAL]
appear.
,LI
Press ,1,/4,to select a setting.
,LI
The default setting is underlined.
• [NORMAL]:
to 9 seconds.
4
Press
,I,/4, to select
a setting.
The default setting is underlined.
sets the duratinn to about 6
[MODEl]:
to bottom.
The image sweeps in tYom top
[MODE2]:
The image stretches
• [FAST]: sets the duration shorter than
[NORMAL].
lel_ to right of the TV screen.
• [SLOW 1]: sets the duration longer than
[NORMAL].
[MODE3]: The image stretches
the center of the TV screen.
• [SLOW2]:
ISLOWl].
through
Press
sets the duration longer than
[MODE4]:
previous
• Some JPEG files may lake longer Io display than
olhers, which may make the duralion seelns longer
Ihun the option you selected. EspecMly progressive
JPEG files or JPEG files of 3+1100+000
pixels or more.
Press @.
cycle
The next image slides over the
image.
[OFF]: turns <tit this function.
4
out from
the et_i_cts.
[MODE5]:
@.
The images randomly
nut from
=<
.%
0
+u_
"11
+3
Selecting
an effect for image
files in the slide show
(JPEG
only)
When ynn play a JPEG image file, ynu can
select the effect to be used when viewing tile
slide show.
1
__.
Press Q DISPLAY twice.
The Control Menu display appears.
2
"o
Press'l"/4,
to select
o
[EFFECT],
then press @.
The options for [EFFECT]
uppeur.
63us
With PBC (Playback
Control)
functions,
can enjoy simple interactive operations,
functions, and od_er such operations.
you
search
PBC playback allows you to play VIDEO CDs
iuteractively by following the menu on the TV
screen.
1
Start playing a VIDEO CD with PBC
functions.
The menu ti)r your selection
2
3
4
appears.
Select the item number you want by the
number buttons.
Press
@.
Follow the instructions
in the menu for
interactive operations.
Refer to the operating instructions supplied
with the disc, as the operating procedure
To
may differ depending
on the VIDEO
go back
menu
to the
CD.
Press d% RETURN.
m
• Depending on the VIDEO CD, [Press ENTER] in
Step 3 may appear as [Press SELECT] in the
operating instructions supplied with the disc. In this
case, press [2:>.
• To play without using PBC, press 1"<'41/IHI_I or the
number buttons while the system is in stop mode to
select a track, then press [2> or @. The system starts
continuous play. You cannot play still pictures such
as a menu. To return to PBC playback, press • twice,
then press [2:>.
64us
To change
the
preset
number
Restart from Step 1.
To change
You can preset 20 FM stations, and 10 AM
slatinns. Before tuning, make sure to mrn down
lhe vnlmne I<)miuinmm.
the
(except
for
Eastern
models)
AM
Russian
tuning
and
interval
Middle
The AM tuning iuterval can he set to either
I0 kHz or 9 kHz.
To change the AM tuning interval, first tune in
1
Press FUNCTION repeatedly until
"TUNER FM" or "TUNER AM" appears
in the front panel display.
2
Press and hold TUNING + or- until the
auto scanning starts.
Scanning slops when the system tunes in a
station. "TUNED" aim "ST" (for stereo
any AM station, then turn off the system by
pressing I1(_) on the unit, While holding down
on the unit, press I/(_) on the unit to turn on
the power, lfyou change the interval, AM preset
stations will be erased.
To reset the interval, repeat the same procedure.
program) appear in the frnnl panel display.
3
4
5
Press SYSTEM MENU.
Press 4/,1, repeatedly until "MEMORY"
appears in the front panel display.
"11
€-,
Press G or -.).
A preset number appears in the front panel
display.
6
Press ,I,/4,to select the preset number
you want.
• You can select the preset number directly by
pressing the number buttons.
7
Press @.
The station is stored.
L
8
9
LI
J l
L
IS
T
iS
Repeat Steps 1 to 7 to store other
stations.
Press SYSTEM MENU.
The system menu turns off.
65us
If an FM
program
is noisy
It" an FM progrmn is noisy, ynu can select
monaural reception. There will be no stereo
Preset radio stations in the system's memory
first (see "Presetting Radio Stations" (page 65)).
1 Press
SYSTEM
will improve.
MENU.
I
1
efli:ct, but receptinn
Press FUNCTION
repeatedly until
"TUNER FM" or "TUNER AM" appears
in the front panel display.
The htst received
2 Press ,I,/4, repeatedly
station is tnned in.
I_,I
2
until "FM MODE"
appears in the front panel display.
I, ,I
I_
Press PRESET + or - repeatedly to
select the preset station.
Each time ynu press the buttnn, the system
tunes in one preset station.
3
Press @ or ").
4 Press ,t/q, to select "MONO."
Tile default setting is underlined.
• "STEREO":
• You can select the preset station number directly
by pressing the number buttons.
3
• "MONO':
Tile setting is nmde.
6
To turn off the radio
to non-preset
radio
stations
Use manual nr autonmtic tnning in Step 2.
For manual tuning, press TUNING + or
repeatedly.
For automatic tuning, press and hold TUNING +
or -. The automatic tuning stops automatically
when the system receives
stop the automatic
TUNING + or -.
To
listen
you
know
the radio station. To
tuning manually,
to radio
the
stations
Naming
1
Press FUNCTION
preset stations. These
repeatedly until
"TUNER FM" or "TUNER AM" appears
in the front panel display.
Tile last received
station is ttmed in.
2
Press PRESET + or - repeatedly to
select the preset station you want to
create an index name for.
tJ
Press SYSTEM MENU.
Press D.TUNING.
4
Press @.
Press t,/4, repeatedly until "NAME IN"
appears in the front panel display.
• To improve recepliom reorienl the supplied antennas
(aerials).
5
66us
for
lor each preset station.
when
frequencies
nanle
stations
names (for example, "XYZ") appear in the fi'ont
panel display when a station is selected.
Note that no more than one name can be entered
press
2 Press the number buttons to select the
frequencies.
3
MENU.
preset
Yon can enter a
Use direct Inning in Step 2.
1
Press SYSTEM
Tile system menu turns off.
PressI/(_
listen
reception.
5 Press @.
Adjust the volume by pressing
VOLUME +/-.
To
stereo reception.
monaural
Press
@ or +.
6
Create a name by using the cursor
buttons.
Press '1"/4, to select a character, then press @
to nlove the cursor to the next position.
Letters, numbers,
and other symbols can be
Satellite
Radio
XM Satellite Radio offers an extraordinary
variety of commercialq'ree
nmsic, plus the best
If you
in sports, news, talk and entertainment.
XM is
broadcast in superior digital audio from coast to
make
a mistake
To erase the character,
press @/@
repeatedly until the character
flashes, then press CLEAR.
to be erased
Press @.
"COMPLETE"
appears in the l?ont panel
display, and the station name is stored.
8
XM
input for a radio station.
Press @/+ repeatedly until the character to
be changed flashes, then press 'I'/4, to select
the desired character.
7
About
Press SYSTEM MENU.
The system menu turns off.
coast. From rock to reggae, from classical to hip
hop, XM has something for every nmsic fan.
XM's dedicafiou to playing the richest selection
of music is matched by its passion liar live
sporting events, talk radio, up-to-the-milmte
news, stand-up comedy, children's
programming, and nmch more. For U.S.
customers, iuli_rmation about XM Satellite
Radio is available online at www.xmradio.com.
For Canadian customers, iul\)rmation
Canada is online at www.xmradio.ca.
about XM
XM
and
Satellite
Radio
Terms
"1"1
€-
Conditions
• You can check
repeatedly
the frequency
by pressing
DISPLAY
Hm'dware mM required monthly
(page 67).
Viewing the station name or
frequency
in the front panel
display
subscription
sold separately. Other lees and taxes, including
a one-time activation lee may apply.
Subscription lee is consumer only. All Ices and
programmiug subject to change. Channels with
t)'equent explicit language are indicated with an
XL. Channel blocking is available for XM radio
When the system is set to "TUNER FM" or
"TUNER AM," you can check the frequency
receivers by calling 1-800-XMRAD10
(US
residents) and 1-877-GET-XMSR
(Canadian
using the front panel display.
residents).
Press DISPLAY.
Each time you press DISPLAY,
For a full listing of the XM commercial-fi'ee
the display
changes as shown.
(_) Station name":
channels and advertising-supported
channels,
visit lineup.xmradio.com
(US residents) or
xmradio.ca (Canadian residents).
@ Frequency '_':
" This is displayed if you have entered a name for a
preset station.
Subscriptions subject to Customer Agreement
available at xmradio.com (US residents) and
"* Returns to the original display when several seconds
has elapsed.
in the 48 contiguous United States and Canada.
O 2006 XM Satellite Radio Inc. All rights
xmradio.ca
(Canadian
residents).
reserved. All other trademarks
of their respective owners
Only available
are the property
continued_
67us
To
Activate
XM
Satellite
Radio
Once you have installed the XM Mini-Tuner
Dock, inserted the XM Mni-Tuner, connected
the XM Dock to your XM Ready @ home audio
system, and installed
the autenua,
ynu are ready
m
• To ensure optimal reception of XM's satellite signah
nlove
your antenna to various window locations
around your home to see where the best reception will
be received. Most XM customers place the antenna in
a south-facing window with a clear view to the sky.
to subscribe and begin receiving XM
programming.
There are three places to find
your eight character XM Radio 1D: nu the XM
Miui-Tuner, on the XM Mini-Tuner package,
and on XM Chaunel 0. Record tl_e Radio ID in
the lollowing
eight squares
Checking
1
the XM Radio
ID
Press FUNCTION repeatedly until"XM"
appears in the front panel display.
l\_r rellzreuce.
DDDDDDDD
2
Press D.TUNING.
Notc: The XM Radio 1D does not use the letters
3
"1," "O," "S," or "F." Activate your XM Satellite
Press 0, and then @ to select channel
O.
4
Radio service in the U.S. online at http://
acfivate.xmradin.com
or call 1-800-XMRAD10
(1-811(1-967-2346).
Check the XM Radio ID in the front
panel display.
You will need a
major credit card. XM will send a signal from
the satellites to activate the fifll channel lineup.
Activation normally takes 10 to 15 minutes, but
duriug peak busy periods you may ueed to keep
your XM Ready home audio system on R_r up to
an hour. When you can access the fldl chaunel
lineup on your XM Ready home audio system
Receiving XM Radio
broadcasts
Before tuning,
vnlunle
1
to
make sure to turn down the
miuinlunl.
Press FUNCTION repeatedly until"XM"
you are done. For more information or to
subscribe in Canada, visit XM ou the Web at
www.xmradio.ca
or call XM's Listener Care at
appears in the front panel display.
1-877-GET-XMSR
For slow tuning, press TUNING
briefly.
Connecting
Press TUNING
(1-87%438-9677)
the XM Radio
Counecl-aud-Play
+ or
For fast tuning, press and hold TUNING
Or
Before nperatiug
+ or - to select a
channel.
+
.
the syslem, c(mnect the XM
Adjust the volume by pressing
VOLUME +/-.
antenna to Ihe XM jack.
Selecting
category
channels
(Category
from a
Tuning)
You can select a chatmel from one category or
all the categories by changing the categnry
mode.
1
Press CATEGORY MODE repeatedly to
select "ONE CAT."
• "ALL CAT" : You can select a channel
XM Jack
68us
li'om all the categories.
is "ALL CAT."
The initial setting
2
• "ONE CAT" : You can select a channel
l?om one category. "CAT" lights up ill the
l?'ontpanel display, when you set to "ONE
CAT" mode.
Displaying
information
display
Press CATEGORY
Press DISPLAY repeatedly.
+ or - to select the
category you want.
Tile category is selected and the channel
with the lowest number in the specified
category
3
is selected.
Press TUNING + or - to select the
channel.
• When you select a channel in the "ONE CAT '' rood<
Ihe channel you selected may not be the one in the
category you want. This is because one channel may
belong to more than one catego U.
• If you press CATEGORY + or in the "ALL CAT"
mode, the first channel of the next or previous
category is selected lCategory Skip).
Selecting
channels
by
inputting
the channel number
directly (Direct Tuning)
1
4
Each time you press DISPLAY while tuning in
the channel, the display changes @ --+ @ --+ ...
@ Channel
@ Channel
name
nmnber
@ Category
@ Artist name/Feature
(_) Song/Progrmn
title
3
'TI
€3
3
Press FUNCTION repeatedly until"XM"
appears
2
3
the XM Radio
in the front panel
in the front panel display.
Press D.TUNING.
Enter the channel number using the
number buttons.
Press
@.
The selecled channel
is tune in.
m
• When you select channels bv Direct Tuning the
categor} mode is automaticall} set to "ALL CAT."
6gus
Selecting
the channel by
using the preset numbers
1
presetting them using the preset nmnbers.
You can preset up to 30 XM Radio channels.
Presetting
1
2
you want to preset.
Press SYSTEM MENU.
"MEMORY"
uppeurs in the front panel
display.
4
Press _.
5
Press +/4, repeatedly to select the
preset number.
Preset numbers from 1 to 30 are ax ailable,
and channel I is preset for all II_e preset
numbers when you purchase the unit.
• You can select the preset number directly by
pressing the number buttons.
6
Press _.
The channel
number.
7
8
is stored as the selected preset
Repeat 2 to 6 to preset another
channel.
Press SYSTEM MENU.
The system menu turns off.
To change
the preset
Resturt from Step 1.
70us
buttons
to select the
You can also select the number by pressing
the PRESET + or -.
in the front panel display.
Tune in the channel
in the front panel display.
Press the number
preset number you want.
channels
For details on selecting channels, see
"Listening Io the XM Radio" lpage 67).
3
2
You can select a preset number from 1 Io
30.
Press FUNCTION repeatedly until"XM"
appears
Press FUNCTION repeatedly until"XM"
appears
You can selecl the channels you want direclly by
number
m
• The preset channel information will be updated
depending on the service provided hy the XM
Satellite Radio Inc. that you have subscribed to.
• When the XM Radio ID appears in Ihe front panel
display ("channel 0" is selected) (page 68), you
cannot preset XM Radio channels. The XM Radio ID
disappears when other than "channel 0" is selected.
XMRadiomessageslist
Message
appears
Explanation/Remedies
ANTENNA
The XM antenna is not
connected
being
or translld
received
"_Make
securely
ssion
sure that
the antenna
is
connected.
Try to disconnect
antenna
is not
properly.
then
the
reconnect_
or
turn off the power then turn
back on.
UPDATING
The encryption code is being
updated.
,,,_Wait until the encryption
code has been updated.
NO SIGNAL
The signal strength is too weak.
•,_Adjust the antenna so that
the signal strength is as
strong as possible.
LOADING
The audio channel or
'11
inlbrmation is being acquired.
,,,_Wait until the audio channel
or information has been
acquired.
OFF AIR
The selected channel is off the
air.
,,_Make sure that you selected
the channel properly.
TW to select another
cl/annel.
....
There is no characteristic
inlbrmation such as all artist
name, song title or program title
available.
--
The preset number entered is
invalid number.
_l_Enter a number from 1to 30.
CH ---
The selected channel is not
available.
71us
By adjusting tire remote signal, you can control
your TV with tire supplied remote.
• When you replace the batteries of Ihe remote, Ihe
code number may reset itself to the defauh (SONY)
setting. Reset the appropriate code number.
Controlling
remote
TVs with the
Press and hold TV I/@ while entering your
TV's manufacturer's code (see the table)
using the number buttons. Then release TV
I/@.
lfyou
set successfully
the manufacturer's
code,
tire TV button flashes twice slowly, lithe setting
is unsuccessthl, the TV button flashes five times
quickly.
Code
numbers
of controllable
TVs
If more than one code number is listed, try
entering them (>ireat a time rmtil you find tire <)ire
that works with your TV.
Code number
RCA/PROSCAN
503.5 lI/, 544
SAMSUNG
515, 517. 544, 557. 566. 569.
574
SANYO
5//& 545,567
SHARP
517,535,565
TELEFUNKEN/
SABA
531L53Z 54Z 549, 558
THOMSON
5311,537,547, 549
TOSHIBA
535,541,551
ZENITH
543,567
CATV
Manufacturer
Code number
SONY
821,824,825
HAMLIN/REGAL
83& 837.83& 839.84(1
JERROLD
831L831
JERROLD/GI
806,807, 80& 809,810, 811,
812,813. 814
OAK
841,842,843
PANASONIC
816,826,832,
PIONEER
828,829
SCIENTIFIC
ATLANTA
815,816,817,
TOCOM/PHILIPS
831L831
ZENITH
826,827
To
control
the
833,834,835
844
TV
You can control tire TV by using li_)llowing
buttons.
TV
72us
Manufacturer
Manufacturer
Code number
SONY/AIWA
501 (default)
DAEWOO
503, 5116,515,544
FISHER
508,545
GRUNDIG
533
HITACHI
ITT/NOKIA
By pressing
TV I/(_)
You can
Turn the TV on or off.
TV INPUT
Switch the TV_s input source
between the TV and other input
sources.
503,514,515,517,544,557
TV VOL +_"
Adjust the TV vohlme.
521,522
TV CH +1 "
Select the TV channel.
JVC
516
Numberbuttons 'I: Select the TV channel.
LG/GOLDSTAR
503, 515, 517,544,568
TOOLS"
LOEWE
515
Displays the operation menu for
the current display.
MAGNAVOX
5113,515, 517.518,544.
RETURN"
MITSUBISHI/MGA
503,527,544,566,568
Return to the previous channel or
layer on the menu of the TV.
PANASONIC
5119,553,572
TV MENU '_'
Display the menu of the TV.
PHILIPS
518, 55Z 558
MUTING*
Turn off the TV sound
PIONEER
509,525,551
566
temporarily.
By pressing
You can
÷14,,lq,
l..).r
,_-.
\./ . Sclecllhcitem on themenu.
ENTER"
r. To use these bultons
while in the TV mode (the TV
bulton lights up), press Ihe TV butlon.
+- is for selecting a channel
10. (For example,
2 and 5.)
number greater than
for channel 25, press +-, then
rm_
• Depending on the TV, you may not be able to comrol
your TV or to use some of the buttons ahove.
• The TV mode turns off when you do not operate the
remote for 10 seconds.
THEATRE
SYNC allows you to turn on your
Sony TV and this system, changes the system
mode to "DVD," and then switches the TV's
input source you set with one button push.
Preparing
for the THEATRE
SYNC function
Regisler 1he TV's input source connected
1(/Ihis
system.
Press and hold TV INPUT while entering the
code for the TV's input source connected
to this unit (see the table) using the number
buttons.
The TV's input source is selected.
11"you successfully sel the TV's input source
code, lhe TV bulton flashes Iwice slowly. If the
setting is unsuccesslul,
O
"o
the TV button flashes
five times quickly.
Sel your TV's input to the input you used to
c(mnecl the unil. For delails, see lhe operating
inslruclions
0
_"
_a
of your TV.
By pressing Number
TV's input source
TV INPUT
0
No in.it
(Defauh)
source
1
VIDEOI
2
VIDEO2
3
VIDEO3
4
VIDEO4
5
VIDEO5
6
VIDEO6
7
VIDEO7
8
VIDEO8
9"
COMPONENT
1
CLEAR"
COMPONENT
2
PICTURE
COMPONENT
3
COMPONENT
4
NAVI"
AUDIO"
SUBTITLE
'_ HDMI
I
ANGLE:"
HDMI
2
VIDEO
FORMAT*
HDMI
3
continued_
73us
By pressing
Number
TV's input source
m
MOVIE/
HDMl 4
• This function is only for Sony TVs. (This fimction
may not work on some Sony TVs.)
MUSIC _',
"
Except
• If distance
HDMl 5
DYNAMIC
BASS"
function
lbr North American
between
models.
the THEATRE
SYNC
Point the remote to the direction of TV and this
unit, then press THEATRE SYNC once.
While transmitti ug the code fFonl the renlote, the
TV button flashes.
If this function does not work, change the
transmit time. The transmit time varies
depending
To
on tile TV.
change
the
transmit
time
Press and hold TV CH +* while entering the
code for transmit time (see the table) using
the number buttons.
The transmit
time fron_ the remote is selected.
If you successfully set the transmit time code,
the TV button flashes twice slowly, lithe setting
is unsuccesstill, the TV button flashes five times
quickly.
" Functions as both TV CH + and SOUND FIELD +
button.
74us
By pressing
Number
Transmit time
TV CH +
1
0.5 (Defimlt)
2
1
3
1.5
4
2
5
3
6
4
7
5
8
6
Install the unit near the TV.
• Keep the remote pointed in the direction of the TV
and this unit while the TV button is flashing.
• Keep the remote
Operating
function
TV and this unit is too far, this
may not work.
pointed
in the direction
and this unit while entering
Ihe code.
of the TV
Reinforcing
bass frequencies
You can reinl\wce bass frequencies.
You can set tile system to turn off at a preset
time, so you can fall asleep listening to music.
You can preset tire time in I or 10=minutes
increnlents.
Press DYNAMIC
Bass frequencies
To turn
off
Press DYNAMIC
BASS.
are eflcctively
the
sound
BASS again.
reinl\wced.
effect
Press SLEEP.
Each time you press this button, the minutes
display (the remaining time) changes as tMlows:
SLEEP 90M ---+ SLEEP 80M ---+ SLEEP 70M
T
SLEEP
OFF *--- SLEEP
10M ..... SLEEP 60M
When you set the sleep timer, "SLEEP" lights
tip in the front panel display.
To check
the remaining
time
Press SLEEP once.
To change
o
the
remaining
Press SLEEP repeatedly
time.
To cancel
function
the
time
to selecl the desired
sleep
timer
Press SLEEP repeatedly until "SLEEP
appears in the front panel display.
To set
the
system
1
sleep
O
timer
using
OFF"
the
menu
Press SYSTEM
MENU.
2 Press ,I,/4, repeatedly until "SLEEP" appears
in the front panel display, then press @ or
..).
3 Press ,I,/4, to select a setting.
The minutes display (the remaining time)
changes
as fMlows:
SLEEP 90M _
SLEEP 80M _
SLEEP
SLEEP
OFF+-+
SLEEP 70M
HIM ..... SLEEP60M
• You can select the remaining time by pressing
Ihe number buttons. In this case, you can preset
the time ill l-minute increments.
continued_
75us
4
Press @.
The setting is made and "SLEEP"
the front panel display.
lights up in
5 Press SYSTEM MENU.
Tile systenl menu turns off.
The brightness of tile front panel display can be
set to either of 2 levels.
1
Press SYSTEM MENU.
2
Press'l'/4,
repeatedly until "DIMMER"
appears in the front panel display,
press @ or-.).
3
then
Press ,I,/4, to select the brightness of
the front panel display.
Tile default setting is underlined.
• "DIMMER
OFF": Bright.
• "DIMMER
ON": The front panel display
and the Sony logo become
4
Press @.
The setting is made.
5
Press SYSTEM MENU.
Tile system menu turns off.
76us
dark.
m
• Depending on the type of DIGITAL MEDIA PORT
adapter (not supplied), you may be able to operate i
connected component using either the buttons on the
remote or the unit. The following ilhlstration shows
The DIGITAL
adapter
audio
MEDIA
PORT
is for enjoying
source
sound
or computer.
an example
(DMPORT)
from
of buttons
Ihat can be used in tiffs case.
a portable
By connecting
a
i:il
DIGITAL
enjoy
MEDIA
sound
PORT
fi'om
adapter,
tile connected
you call
component
i:ii
on
the system.
Available
vary
DIGITAL
in each
For details
PORT
MEDIA
PORT
i!ill
ii£l
!i() i;_ i!)
adapters
area.
()ii):
on connecting
adapter,
Components"
the DIGITAL
see "Connecting
(page
Other
34).
CZZ2;,
• Do not connect an adaptor other than the DIGITAL
MEDIA PORT adapter.
• Do not connect or disconnect the DIGITAL MEDIA
PORT adapter
tu riled on.
• Depending
i!i
MEDIA
II--
ii
o
to/from the unit while the system is
o
on the type of DIGITAL
MEDIA
PORT
adapter (not supplied), the images are also output. In
this case, the system outputs the composite vide()
signal only regardless
of the type of video signal.
Playing the connected
component
on the system
1
Press
FUNCTION
"DMPORT1"
the
2
front
Start
repeatedly
or "DMPORT2"
panel
playback
until
appears
in
display.
of the connected
component.
The
sound
componenl
connected
and
images
are played
TV.
from
the connected
on the system
or
For operation details, see the operating
inslruclions
PORT
of Ihe DIGITAL
MEDIA
adapter (not supplied).
il]'l
• When listening to MP3 or other compressed music
using a portable audio source, you can enhance the
sound. Press SOUND FIELD +_ repeatedly until
"A.F.D. STD" appears in the front panel display. To
cancel select other than "A.F.D. STD."
77us
To
lock
insert
a disc
function
while
the
child
is on
Press _ on the remote to open the disc tray and
press DISC SKIP repeatedly
(Child Lock)
You can deactivate
tile buttons on the unit
(except lk)r 11_)) for pre_enling misoperatiom
such as child mischief (child lock fimction).
When the child lock fimction is activated, the
buttons on the unit are locked and "(2_e_" lights
up in the li'ont panel display. (You can operate
the system by using the remote.)
izm
• When
child
you
lock
the front
operate
function
panel
the buttons
on
the unit
is om "CHILD
LOCK"
while
the
appears
in
display.
1
Press SYSTEM MENU.
2
Press ,I,14,repeatedly until "CHILD
LOCK" appears
in the front panel
display, then press @ or -.).
3
Press ,I,/4, to select a setting.
The default setting is underlined.
• "OFF": Child lock function ofT.
• "ON":
4
Child lock fimction on.
Press (_.
The setting is made.
5
Press SYSTEM MENU.
The system menu turns off.
• You can activate the child lock function by pressing
• for more than 5 seconds (" C_,M " lights up in the
front panel display).
To cancel press • for more than 5 seconds so that
"O.=n "disappears from Ihe front panel display.
To
lock
remove
function
a disc
while
the
child
is on
Press ,6, on the remote and press DISC SKIP
repeatedly
lights tip.
78us
until the desired
[)IS(7 indicator (1-5) lights up, then place a disc
on the tray and press ,6, on the remote.
until the desired DISC indicator
(1-5)
4
Press €'14,to select [ON -_], then press
®.
• If you have not entered a password
Tile display for registering
a
new
password
appears.
(CUSTOM
PARENTAL
PARENTAL
CONTROL,
CONTROL)
PARENTAL CONTROL
Enter a new 4-digit
You can set two kinds of playback
for the desired disc.
• Custom Parental
restrictions
Control
You can set playback
restrictions
so thai the
system will not plW inappropriate
• Parental Control
Playback
password,
then press [ENTERS;.
of some DVD VIDEOs
discs.
Enter a 4=digit password using file number
butt(ms, then press (:).
The display for confirming tile password
appears.
can be
limited according to a predetermined
level
such as tile age of the users. Scenes may be
• When you have already registered a
password
The displuy lk)rentering the pUSS'vvord
appears.
blocked or replaced with different scenes.
Tile same password is used ff)r both Custom
Parental Control and Parental Control.
<
Preventing
playback
of
specific discs [CUSTOM
PARENTAL
CONTROL]
You can set the same Custom
Parental
o
@
D..
PARENTAL CONTROL
En e passwo
d, hen p ess _a_g_j
Coulrol
password for tip to 40 discs. When you set the
41st-disc, Ihe first disc is canceled.
1
Insert the disc you want to lock.
lt"tlae disc is playing, press • lo slop
Q.
5
using the number buttons, then press
playback.
2
3
Enter or re-enter your 4-digit password
Q.
Press O DISPLAY while the system is
in stop mode.
[Custom parental control is set.] appears
and the TV screen returns to the Control
The Conlrol Menu display appears.
Menu display.
Press t"/4, to select
[PARENTAL
CONTROL],
then press
®.
The oplions
appear.
for [PARENTAL
CONTROL]
To turn
off
Control
function
1
the
Custom
e-
3
Parental
Follow steps 1 through 3 of "Preventing
playback of specific discs [CUSTOM
PARENTAL CONTROL]."
2 Press ,I,/4, to select [OFF -+], then press
Q.
3 Enter your 4-digit password
using the
number buttons, then press _.
continued_
79us
To play
Parental
1
a disc for which
Control
is set
Custom
[PARENTAL
Insert the disc for which Custom Parental
Control is set.
The [CUSTOM
PARENTAL
Pressw÷to select::_1
CONTROL]
CONTROL],
then press
®.
The options for [PARENTAL
CONTROL]
appear.
display appears.
CUSTOM
Custom
PARENTALCONTROL
parental
control is already
set. To play, enter your password
and press E_TEn .
Press t'/4, to select [PLAYER --*], then
2 Enter your 4-digit password using the
number buttons, then press @.
The system is ready l\_r playback.
press @.
• If you have not entered a password
The display l_r registering a new password
appears.
• If you forget your p issword, enter the 6-digit number
"199703" using the number buttons when the
[CUSTOM PARENTAL
CONTROL]
display asks
you lbr your passwor& then press @. The display
will ask you to enter a new 4-digit password.
PARENTAL CONTROL
Enter a new 4-digit
password,
then press IENTER.
Limiting playback for children
[PARENTAL
CONTROL]
(DVD
Enter a 4-digit password
buttons, then press @.
only)
Playback
ot' some DVD VIDEOs
can be limited
according to a predetermined
level such as the
age of the users. The [PARENTAL CONTROL]
function
level.
1
allows you to set a playback limitation
Press O DISPLAY while the system is
using the number
The display for confirming
• When you have already registered
password
The display for entering
the
appears.
in stop mode.
The Control Menu display appears.
PARENTAL CONTROL
Enter password,
80us
the password
appears.
then press[_NtEnJ.
password
a
4
Enter or re=enter your 4=digit password
using the number buttons, then press
8
Press ,I,/4, to select the level you want,
then press _.
®.
Parental
('olHrol selling is complete.
The display for setting tile playback
limitation level appears.
PARENTAL CONTROL
ILEVEL:
TAN_:_
PARENTAL CONTROL
ILEVEL:
ST_tq
4:
PG13
_
OFF
BSA
The low'er the value, the stricter the
limitation.
5
Press ,I,/4, to select [STANDARD],
then
press C).
The selection
To turn
off
the
Parental
Control
function
items R)r [STANDARD]
are
Set [LEVEL] to [OFF] in Step g.
displayed.
PARENTALCONTROL
To play
a disc
Control
is set
1
for which
Insert the disc and press l::>.
The display R)r enterhlg
OTHERS_
Parental
your password
appears.
2 Enter your 4-digit password
using the
number buttons, then press (_.
6
o
tD
D..
¢0
The system starts playback.
Press ,I,/4, to select a geographic area
as the playback limitation level, then
press _.
The area is selected.
When you select [OTHERS ---+], select and
enter a standard code in the table of
"Parental
Control Area Code List"
(page 107) using the number buttons.
7
1>
D..
<
Press ,I,/4,to select [LEVEL], then press
• If you forget your password, remove the disc and
repeat steps I to 3 of"Preventing playback of specific
discs [CUSTOM PARENTAL CONTROL]." When
you are asked to enter your password, enter" 199703"
using the number buttons, then press @. The display
will ask you to enter a new 4-digit password. After
you enter i new 4-digit password, replace the disc in
the unit and press L=>. When the display for entering
your password appears, enter your new password.
e-
3
®.
The selection
displayed.
items R)r [LEVEL]
are
PARENTALCONTROL
8:
7:
6:
NC17
R
• When you play discs which do not have the P irental
Control fimction, pla}d)ack cannot be limited on this
system.
• Depending on the disc, you may be asked to change
Ihe parental control level while playing the disc. In
this case, enter your password, then change the level.
If the Resume Play mode is canceled, the level returns
to the previous level.
5: _
continued_
81us
Changing
1
the password
Press Q DISPLAY while the system is
in stop mode.
The Control Menu display appears.
2
Press t'14, to select
[PARENTAL CONTROL],
(SPEAKER FORMATION)
Depending on the shape ol the room, there will
be some speakers you cannot inslalh For the
belier surround sound, it is recommended thai
then press
Q.
The options for [PARENTAL
CONTROL]
firsl you decide lhe position of the speakers.
appear.
3
1
Press ,I,14,to select [PASSWORD-_],
the password
2
appears.
4
5
buttons,
Enter a new 4-digit
number
6
buttons,
To confirm
using
Press O DISPLAY when the system is
in stop mode.
Enter your 4-digit
number
repeatedly until
"DVD" appears in the front panel
display.
then press @.
The disphty l%r entering
Press FUNCTION
password
then press
password
then press
your password,
the number
using
buttons,
the
@.
using the
The Control Menu disphty appears.
3
Press'1"14,to se ect
FORMATION],
[SPEAKER
then press @.
@.
re-enter
it
then press
Q.
If you
your
make
a mistake
entering
password
Press _ before you press @ and inpul the
correcI
nunlber.
4
82us
Press t'/4, to select [SPEAKER
FORMATION], then press @.
The options for [SPEAKER
FORMATION] appear.
5
Press ÷/.-1to select a setting.
• [STANDARD]: when installing all dae
speakers normally.
• [ALL FRONT]: when installing all tile
speakers in fronl of the lislening position.
EX]
m
•When the wirelesskit WAHT-SDI(supplied
withDAV-HDX501Wonly) is installed,
]STANDARD(WIRELESS)]appearsinstead.
For details,seeIheoperatinginstructionsof the
WAHT-SDI.
• [ALL FRONT - NO CENTER]: when
inslalling the front and surround speakers
in fronl of the listening position.
• [NO CENTER]: when inslalling die front
and surround speakers.
• [SECOND ROOM]: when installing the
['IX)hi
speakers ill one roo111 and SllFFOUlrld
speakers in anofl_er.
• [NO SURROUND]:
when installing
the
ol
center and front speakers.
1>
Q.
1>
&
t-
3
• Speaker
sound in the other room iS Ihe same as
Ihat of Ihe fronl and surround
speakers.
• [FRONT ONLY]: when installing Ille
fronl speakers.
continued_
83us
• When the wireless kit WAHT-SD 1(supplied
with DAV-HDX5IIIW only) is installe&
[STANDARD lWlRED)] appears. For details,
see the operating instructions of the WAHTSDI.
(AUTO CALIBRATION)
D. C. A. C. (Digital Cinema Auto Calibration)
can set the appropriate surround sotmd
automatically.
m_
• Loud
lest
sound
is oulput
when
[AUTO
CALIBRATION] starls. You cannol lurn the vohmle
down. Give consideration to children and neighbor.
6
Press
1
C)"
Press ,I,/4, to select [YES] or [NO], then
2
press @.
CALIBRATION],
see Step 4 of
"Calibrating tile Appropriate Settings
The Control Menu display appears.
3
Press'1"14, to select
FORMATION],
(page 84).
• INO]: exit [SPEAKER
[SPEAKER
then press @.
FORMATION].
4
• In order to enjoy the surround sound after you change
the position of the speakers, it is recommended you
set [SPEAKER FORMATION], and then set [AUTO
CALIBRATIONI.
• To set [AUTO CALIBRATIONI, you need to
connect the supplied calibration mic.
• The front panel display indicates the selected
[SPEAKER FORMATION]. It does not indicate the
speakers which output sound.
• When you change the [CONNECTION] setting in
[SPEAKER SETUPI, the [SPEAKER
FORMATION] setting returns to [STANDARDI.
84us
Press C2_DISPLAY when the system is
in stop mode.
• IYES]: continue with [AUTO
Automatically"
repeatedly until
"DVD" appears in the front panel
display.
The setting is made.
7
Press FUNCTION
Press t,/4, to select [AUTO
CALIBRATION], then press @.
The options for [AUTO CALIBRATION]
appear.
Connect the calibration
mic to the A.CAL
MIC jack on tile front panel, and set it up at
the ear level using a tripod, etc. (not
supplied). The t>ont of each speaker should
face the calibration mic. and there should be
no obstruction
between tile speakers and the
calibration mic. Be quiet during tile
measurement.
m
• Avoid being in the measurement area and
making noise during the measurement (about
one minute), to avoid measurement faihlre.
During the measurement, test signals are output
from the speakers.
• The environment of the room in which the
system is installed may all_.ct measurements.
• If an error message appears, R)llow the message,
then select [YES].
All error message appears when:
the headphones are connected.
the calibration mic is not connected.
front speakers are not correctly connected.
surround speakers arc not correctly
connected.
Calibration
rnic
front and surround speakers are not correctly
connected.
subwoofer is not connected.
Press <-/4,/4,/+ to select [YES] or [NO],
then press @.
• The measurement
Disconnect
is OK.
the calihration
mic. then select
[YES]. The result is implemented.
D.
<
o
tD
D.
¢0
D.
• The measurement
Follow the message,
5
is not OK.
then select [YES] to
e-
3
ID
retry.
Press 4,/4, to select [YES], then press
®.
Culibration
sturts.
• You can check the distance between the listening
position and each speaker. See page 92.
continued_
85us
m
• Whi]e
the Auto
Calibration
do
not turn
off the
do
not press
any
flmcfion
works:
power.
button.
do not change the volume.
do not change the fimction.
do not change the disc.
do not insert or eject a disc.
do not connect the headphones.
do not disconnect the calibration mic.
By using the Setup Display, you can make
various adjustments to items such as picture and
sound.
For an overall list of Setup Display
page 114.
Displayed items vary depending
model.
items, see
on the country
m
• Playback sellings slored in the disc lake priority over
Ihe Setup Display settings and not all Ihe functions
described may "_x,
rol-k.
1
Press O DISPLAY when the system is
in stop mode.
The Control Menu display appears.
2
Press 'I"/4, to select {{i_{1
then press @.
[SETUP],
The options for [SETUP] appear.
3
Press ,I,/4, to select [CUSTOM],
press @.
The Setup Display appears.
86us
then
4
Press ,I,/4, to select the setup item from
the displayed list: [LANGUAGE
SETUP], [SCREEN SETUP], [CUSTOM
SETUP], or [SPEAKER SETUP]. Then
To reset
press @.
2 Select [YES] using ,I,/4,.
The Setup item is selected.
Example:
[SCREEN
SETUP]
all
of the
[SETUP]
settings
1
Select [RESET] in Step 3 and press @.
You call also quit the process and return to tile
Control Menu display by selecting [NO] here.
3 Press @.
Selected item
All tile settings explained on pages 88 to 94
return to tile delhult settings. Do not press I/
(_) while resetting the system as it takes a few
seconds to complete.
5
• When you turn the system on after resetting and no
disc is in the unit, the guide mess ige appears on the
TV screen. Te perlbrm Ihe Quick Selup (page 24),
press (.), te return to normal screen, press CLEAR.
Select an item using 'I'/4,, then press
Q.
The options for the selected item appear.
Example:
[TV TYPE]
<
3
0
tD
D.
Options
6
Select a setting using
t,/4,, then press
Q.
®.
The setting is selected and setup is
e-
3
complete.
SETUP
4:3 LETTER BOX
Selected setting
87us
[SCREEN SETUP]
[LANGUAGE
SETUP]
Choose
settings
connected.
according
to tile TV to be
[LANGUAGE
SETUP] allows you to set
various languages for the on-screen display or
sound track.
Select [SCREEN
Select [LANGUAGE
SETUP] in the Setup
Display. For details, see "Using the Setup
The default settings are underlined.
Display"
SETUP]
ill the Setup Display.
For details, see "Using the Setup Display"
(page 86).
SCREEN SETUP
(page 86).
• [TV TYPE]
• [OSD] (On-Screen Display)
Switches the display language on the TV screen.
• [MENU] (DVD VIDEO only)
You can select the desired language
disc's IlleIll_l.
When you select [ORIGINAL],
the language
given priority in tile disc is selected.
• [SUBTITLE] (DVD VIDEO only)
Switches the language of the subtitle recorded
on the DVD VIDEO.
When you select [AUDIO FOLLOW], the
language for the subtitles changes according
to
you selected lor the sound track.
• If you select [OTHERS ----1 in [MENU], [AUDIO],
and [SUBTITLE], select and enter a hmguage
code
from "Language Code List" (page 107) using the
number
buttons.
m
• When you select a language in [MENU], [AUDIO],
or [SUBTITLE] that is not recorded on the DVD
VIDEO, one of the recorded languages will be
automatically selected (depending on the disc, the
language may not be selected automatically).
88us
The default setting varies, depending
country model.
TV (4:3
on the
l\)r the
• [AUDIO] (DVD VIDEO only)
Switches the language of the sound track.
tile language
Selects tile aspect ratio of the connected
standard or wide).
[16:9]
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
[4:3 LETTER
BOX]
Select this when you connect a 4:3
screen TV. Displays a wide picture
with hands on the upper and lower
portions of the TV screen.
[4:3 PAN SCAN] Select this when you connect a 4:3
screen TV. Automatically displays
the wide picture on the entire
screen and cuts off the porlions
that do not fit.
[16:9]
[JACKET
PICTURE]
The jacket picture (still picture)
appears, but only when the jacket
picture is already recorded on the
disc ICD-EXTRA, etc.). If the
disc does not contain a jacket
picture, the [GRAPHICS] picture
appears.
[4:3 LETTER BOX]
[GRAPHICS]
A preset picture stored in the
system appears.
[BLUE]
The background color is blue.
[BLACK]
The background color is black.
[4:3 PAN SCAN]
• [BLACK
m
• Depending on the DVD, [4:3 LETTER BOX] may be
selected autonlatically instead of [4:3 PAN SCAN] or
vice versa.
•
[YCsCR/RGB
(HDMI)]
Selects
the type of HDMI
HDMI
OUT jack.
signal
output
[YCBCR]
Outputs YCBCR signals.
[RGB]
Outputs RGB signals.
LEVEL]
Selects the black level (setup level) l\_r the video
signals output from the jacks other than
COMPONENT
VIDEO OUT/HDMI OUT.
[ON]
Sets the black level of the output
signal to the standard level.
[OFF]
Lowers
fl'om
the standard
black level.
Use tiffs when the picture becomes
too white.
m
• [BLACK LEVEL (COMPONENT OUT)]
Selects the black level (setup level) for the video
• If the playback picture becomes distorted, set
[YCBCR]to [RGB].
signals output from the COMPONENT
OUT jacks.
• If the HDM[
You calmot select this and the setting is not
et]i:ctive when the system outputs progressive
with
a DVI
output
even
OUT
jack,
when
jack
IRGB]
you
is connected
signals
select
will
to equipment
be automatically
IYCBCRI.
• [SCREEN SAVER]
The screen saver image appears when yon leave
the system in pause or stop mode lor 15 minutes.
or when you play back a CD. DATA CD (MP3
audio), or DATA DVD (MP3 audio) tbr more
than 15 minutes. The screen saver will help
prevent your display device from becoming
&
[OFF]
Sets the black level of the output
signal to the standard level.
[ON]
Raise the standard
black
level.
3
(D
Use this when the picture becomes
too black.
[ON__]
Turns on the screen saver.
[OFF]
Turns off Ihe screen saver.
(page 88). Adjust to watch 4:3 aspect ratio
progressive signals, lt'you can chauge the aspect
TV screen in stop mode or while playing a CD,
DATA CD (MP3 audio), or DATA DVD (MP3
audio).
¢0
o.
signal.
• [4:3 OUTPUT]
This setting is el'ti:ctive only when you set [TV
TYPE] in [SCREEN SETUP] to [16:9]
color or picture on the
o
o
VIDEO
damaged (ghosting). Press any button (e.g., E::>
button) to cancel the screen saver.
• [BACKGROUND]
Selects the background
o..
<
ratio on your progressive R_rmat (525p/625p)
compatible TV, change the setting on your TV,
m)t the system. Note that this setting is effective
only for HDMI connection or progressive
signals outpnt from the COMPONENT
OUT jacks.
VIDEO
continued_
89us
m
• This setting is effective only when
"PROGRESSIVE"is selected by using VIDEO
FORMAT lpage 32).
[FULL]
Select this when you can change
the aspect ratio on your TV.
[NORMAL]
Select this when you cannot
change the aspect ratio on your
TV. Shows a 16:9 aspect ratio
signal with black bands on left and
right sides of the image.
;iiiili! ! i i! iiiiiiiiii ii ii;
[CUSTOM
SETUP]
Use this to set tip playback
settings.
related and other
Select [CUSTOM SETUP] in the Setup Display.
For details, see "Using the Setup Display"
(page 86).
The default settings are underlined.
CUSTOM SETUP
16:9 aspect ratio TV
• [HDMI CONTROL]
Switches the HDMI CONTROL
off. This ftmction is available
function on or
when you connect
the system and TV with the HDMI cord. For
details on this function, see the HDMI
CONTROL
Guide (supplied
separately).
[OFF]
Sets tile HDMI CONTROL
function to off.
[ON]
Sets the HDMI CONTROL
function to on.
You can operate
between
connected
mutually
that arc
with the HDMI cord.
COHlponL'nts
m
• When you set to [ON] without the HDMI connection
of the TV, [Please verify the HDMI connection]
appears and you can not set to [ON].
• [STB SYNCHRO]
Switches the STB SYNCHRO
function on or
ofT. This function is available
when you connect
the system and TV with the HDMI cord and you
set [HDMI CONTROL] to [ON]. For details on
this function, see the HDMI CONTROL Guide
(supplied separately).
[OFF]
gOus
Sets the STB SYNCHRO
to off.
function
[ON]
Selsthe STB SYNCHRO ffmction
• [AUDIO
DRC] (DVD VIDEO only)
Narrows the dynamic range of the sound track.
Useful for watching movies at low volume late
IO on.
m
at night.
• This function is available only when you set [HDMI
CONTROL] to [ON].
[OFF]
• [PAUSE MODE] (DVD VIDEO/DVD-R/
DVD-RW only)
Selects tile picture in pause mode.
No compression of dynamic
range.
[STANDARD]
Reproduces the sound track with
the kind of dynamic range that the
recording engineer intended.
[AUTO]
[MAX]
Compresses dynamic range fillly.
[FRAME]
The picture, including suhjects
that move dynamically, ix output
with no jitter. Normally select this
position.
The picture, including suhjects
that do not move dynamically, is
output in high resolutkm.
• [TRACK SELECTION] (DVD VIDEO only)
Gives the sound track which contains the highest
number of channels priority when you play a
DVD VIDEO on which multiple audio formats
(PCM. DTS, MPEG audio, or Dolby Digital
fommt) are recorded.
[OFF]
No priorily given.
[AUTO]
Priority given.
OUTjack.
[OFF]
The sound is not output from the
HDMI OUT jack.
[ON]
Outputs audio signals by
converting Dolby Digital, DTS, or
96 kH7/24 bit PCM signals to 48
kHU 16 bit PCM.
<
• When you connect the unit and TV with the HDMI
cord and [ON] is selecte(L AUDIO DRC, A/V SYNC,
DYNAMIC BASS, MOVIE/MUSIC, and sound field
are not applied to the sound that is output from the
TV.
m
• When you set the item to [AUTO], the language may
change. The ]TRACK SELECTION] setting has
higher priority than the ]AUDIO] settings in
[LANGUAGE SETUP] (page 88). (Depending on
the disc, this function may not work.)
• If PCM, DT& Dolby Digital sound, and MPEG audio
tracks have the same number of channels, the system
selects PCM, DTS, Dolby Digital sound, and MPE(I
audio tracks in this order.
• [MULTI-DISC
• [AUDIO (HDMI)]
Selects the audio output stares ti'om the HDMI
o
¢D
(n
e-
3
ID
RESUME] (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc
off.
Resume
setting on or
[ON]
Stores the resume seltings in
memory for up to 40 discs.
[OFF]
Does not slore Ihe resume
sellings
in memory. Playback reslarls at
Ihe resume point only for the
current disc in the unit.
91us
[SPEAKER
• When you change Ihe [CONNECTION] setting, the
]SPEAKER FORMATION] setting returns to
]STANDARD].
SETUP]
To obtain the best possible
connection of the speakers
snrround sound, set
and their distance
from your listening position. Then use the test
tone to adjnst the level and the balance of the
speakers
• [DISTANCE (FRONT)]
The default distance setting for the speakers
in
relation to the listening position is shown below.
When yon set the distance using the Quick Setup
(page 24), the settings is automatically
displayed.
to the same level.
Select [SPEAKER SETUP] in the Setup
Display. For details, see "Using the Setup
Display" (page 86).
The default settings
are underlined.
/
• You cannot operate these setup items when you
connect headphones to the unit.
0,00 - 7.00 m2)/
0-23ft
SPEAKERSETUP
To
return
when
to the
default
changing
Be sure to change the value in the Setup Display
when yon move the speakers.
setting
a setting
Select the item, then press ('LEAR.
Note that
only the [CONNECTION]
setting does not
return to the deLmlt setting.
do
speakers,
not
COllnect
center
set the parameters
or surroulld
l\_r [CENTER]
and
[SURROUND].
Since the front speaker and
subwoot)r setting is fixed, you cannot change
them.
[FRONT]
IYESI
[CENTER]
IYESI: Normally select Ihis.
INONEI: Select this if no center
speaker is used.
[SURROUND]
[SUBWOOFER]
g2us
[YES]: Normally select this.
[NONE]: Select this if no
surround speaker is used.
[YES]
Front speaker dislance from the
listening position can be set from
0.00 to 7.00 meters 2) (0 to 23 fl).
• [CONNECTION]
If yOU
[L/R]
3,00 roll 0 It 1)3/
[CENTER]
3.00 roll 0 It _)3/
(appears when you
set [CENTER] to
[YES] in the
Center speaker distance from file
listening position can be set from
0.00 to 7.00 meters2) (0 to 23 fl).
[CONNECTION]
setting.)
[SUBWOOFER]
Subwool_r
3.00 m/10 It _)3/
listening position can be set from
0.00 to 7.00 meters 2) (0 to 23 fl).
distance
flom IIle
])Whenyou per%rm the Quick Setup (page 24), the
default settings are changed.
2)0.00 to 7.01 meters fur North American models.
3)3.04 roll0 fl lbr North American models.
• [DISTANCE (SURROUND)]
Tile default distance setting t_)r tile speakers ill
relation to tile listening position is shown below.
When you set tile distance using the Quick Setup
(page 24), tl_e settings is automatically
[CENTER]
0.0 dB
(appears when you
set [CENTER] to
[YES] in the
Set this between
+6.0 dB.
6.0 dB and
Set this between
+6.0 dB.
6.0 dB and
[CONNECTION]
setting.)
displayed.
[SUBWOOFER]
+2.0 dB
• [LEVEL (SURROUND)]
You cml vary the level of surround speakers as
li!llows. Be sure to set [TEST TONE] to [ONI
for easy adjustment.
0,00 - 7.00
512)/
[L/R]
0,0 dB
(appears when you
Set Ihis between
+6.11dB.
6.(1dB and
set [SURROUND]
to [YES] in the
[CONNECTION]
setting.)
Be sure to change Ihe value in the Setup Display
when you ulove fl_e speakers.
[L/R]
3.00 roll0 ffl}:_)
(appears when you
set [SURROUND] to
[YES] in the
[CONNECTION]
setting.)
Surround speaker distance
from the listening position can
be set from 0.00 to 7.00
meters2) (0 to 23 fl).
To adjust
the
speakers
at one
volume
of all the
<
time
Turn tile VOLUME control on tile unit, or press
VOLUME +/- on the remote.
O.
• [TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
O.
]!When you perform
default settings
tile Quick
Setup (page 24), the
[OFF]
are changed.
American
from the
speakers.
2)0.00 to 7.01 meters for North American
"_)3.(M roll 11ft for Norlh
The test tone is not emitted
models.
[ON]
models.
The test tone is emitted from each speaker
in sequence while a_liusting level. When
3
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
• Depending on the input stream, tile [DISTANCE]
setting may not be effective.
• When the speaker distance setting is not in the
recommended range,/_1"//q_. "" m is displayed (""
being the number)./_) indicates over the
recommended distance. _1 indicates below.
Adjusting
the speaker
using the test tone
• [LEVEL (FRONT)]
1
speaker in sequence.
level by
Press Q DISPLAY when the system is
in stop mode.
You can vary tile level of front speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
&
Tile Control Menu display appears.
2
Press ,I,/4, to select
[SETUP],
then press @.
[I/R]
0.0 dB
Sel Ihis between
+6.0 dB.
6.0 dB and
The options l\)r [SETUP]
appear.
continued_
g3us
3
Press ,I,/4, to select [CUSTOM],
then
press @.
The Setup Display appears.
4
5
6
Press 'I'/4, repeatedly to select
[SPEAKER SETUP], then press @ or
-).
You
can return
preset
Press t'/4, repeatedly to select [TEST
TONE], then press @ or -).
slations,
I/<b
the systenl
to Ihe default
_
l)arameters,
such
as
settings.
•
Press ,Phi, repeatedly to select [ON],
then press @.
You will hear the lesl tone from each
speaker in sequence.
7
From your listening position,adjust
the
value of [LEVEL (FRONT)] or [LEVEL
(SURROUND)] using <..I,1,14,1->.
The test lone is emitted from only the
speaker which you are adjusting.
8
Press @ when you have finished
making adjustments.
g
Press t'/4, repeatedly to select [TEST
TONE], then press @.
10Press
,t./4, repeatedly to select [OFF],
then press @.
• The lest lone signals arc not oulput from the HDMI
OUT jack.
g4us
1
2
Press I/_ to turn on the system.
Press II, _, and I/_
same time.
"COLD RESET"
on the unit at the
appears in the front p:mel
display and the default settings are returned.
On adjusting
volume
• Do not turn up the volume _ hile listening to i section
with very low level inputs or no audio signals. If you
do, the speakers may be damaged
section is suddenly played.
On power
On cleaning
sources
• Unplug the unit fiom the wall outlet
if you do not
intend to use it for an extended period of time. To
disconnect the cord, pull it out by the plug, never by
the cord.
• Place Ihe system in a location with adequate
ventilation to prevent helt build-up in the system.
However, touching the cabinet shouM be ivoided
not place the unit in a confined space where
• Do not block the ventilation
Do
slots by l)utting anything
• Do not place the unit on surfaces
or near materials (curtains,
the ventilation slots.
(rugs, blankets,
draperies)
etc./
dust, mechanical
to direct
vibration,
or
• Do not install the unit in an inclined position. It is
designed to be operated in a horizontal position only.
• Keep the unit and discs away from equipment
as microwave
• Do not place heavy ohjects
ovens,
with
on the lenses inside Ibe control
evaporates
the disc may be damaged
falls into the cabincl,
have it checked by qualified
operating it any lhrther
unplug
personnel
NOTICE
Caution: This system is capable of holding a still
video image or on-screen display image on your
television screen indefinitely. If you leave Ibe still
video image or on-screen display image displayed
on your TV for an extended period of time you risk
permanent damage to your television screen.
Pr(Liection televisions
this
are especially
susceptible
to
the
Press FUNCTION
"DVD."
system
repeatedly to select
2 Make sure that all discs are removed from
the unit.
unit.
• When you move the system, take out any disc. If you
don'k
15 to 30 minutes. If color irregularity
should persisk
place the speakers filrther away from the TV set.
1
Should this occur, the system may not operate
properly. In this case, remove the disc and leave the
system turned on for about half an hour until the
• If anything
• If the speakers should cause the TV screen to have
color irregularity, turn off the TV then turn it on after
On moving
on the unit.
• If the system is brought directly from a coM to a _Arll
Fin
locatiom or is placed in a very damp room, moisture
moisture
to malfunction.
or large
On operation
may condense
disc/lens
On your TV's color
IMPORTANT
such as
or air ducts, or in a place subject
such
discs,
that may block
• Do not install the unit near heat sources
strong magnets,
loudspeakers.
or
• Do not use cleaning discs or disc/lens cleaners
(including
wet or spray types). These may cause
the apparatus
on the system. The system is equipped with a high
power amplifier. If the ventilation slots are blocked,
the unit can overheat and malfunction.
excessive
powder
cleaners
is poor as this may cause overheating.
sunlight,
shock.
not use any type of abrasive pad, scouring
solvent such as alcohol or benzine.
On cleaning
• At high volu me, over long periods of trine, the cabinet
becomes hot to the touch This is not a malfunction.
radiators,
• Clean the cabinet, panel, and controls with il sofl c h)th
slightly moistened with i mild detergent solution. Do
If you have any questions or problems concerning
your system, please consult your nearest Sony dealer.
On placement
ventilation
when a peak level
3 Press I::::>and I/(_ simultaneously.
"MECHA LOCK" appears in the front panel
display after "STANDBY."
4 Remove the AC power cord (mains lead)
from the wall outlet (mains).
the unit and
before
g5us
On
handling
discs
• To keep the disc clean, handle tile disc by its
edge. Do not touch the surface.
• Do not stick paper or tape on the disc.
If you experience any of the l\dlnwiug
difficulties while using d_e system, use this
troubleshooting
guide to help remedy the
problem before requesting repairs. Should any
problem
dealer.
persist, consult your nearest
Sony
Note that if' service personnel changes some
parts during repair, these parts may be retained.
Power
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave it in
a car parked in direct sunlight as the
temperature may rise considerably inside ttle
car.
• After playing,
On
store the disc in its case.
cleaning
• Before playing,
cloth.
clean the disc with a cleaning
Wipe the disc from the center out.
The power is not turned on.
• Check that the AC power cord (mains lead) is
connected securely.
• Press I/(_) after"STANDBY" disappears from the
front panel display.
If "PROTECTOR" and "PUSH POWER" appear
alternately in the front panel display.
Press I/(_)to turn (711the systcm_ and check the
R)llowing items after "STANDBY" disappears.
• Are the +md
speaker cords short-circuited?
• Are you using only the specified speakers?
• ls anything blocking the ventilation holes of the
system?
After checking the above items and fixing any
problems, turn on the system. If the cause of the
problem cannot be R)und even after checking all the
above items, consult your nearest Sony dealer.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, or anti-static
spray intended l\_r vinyl LPs.
Picture
There
is no picture.
• The video connecting
securely.
cords arc not connected
This system can only play back a standard
circular disc. Using neither standard nor circular
discs (e.g., card, heart, or star shape) may cause
a mali'uuctinn.
• The video connecting
cords arc damaged.
Do not use a disc that has a commercially
• You have set progressive
• The unit is not connected
• The video input on the TV is not sol so that you
can view pictures
available
ring.
accessory
attached,
such as a label or
to the correct TV input
jack (page 19, 30).
from the system.
furmat but your TV
cannot accept the signal in progressive
this case, return the setting to interlace
default
setting)
furmat. In
lbrmat (the
(page 32).
• Even if your TV is compatible
with progressive
format (525p/625p)
signals, the image may be
affected when you set progressive format. In this
case, return the setting to interlace
default setting) (page 32).
• Re-connect
the connecting
• The unit is connected
(the
cord securely.
to an input device that is not
HDCP (high-bandwidth
g6us
lbrmat
digital content
protection) compliant ("HDMI" on the front panel
does not light up). See page 110.
• If the HDMI OUT jack is used for vide() output,
changing the type of video signal output from the
HDMI OUT jack by pressing VIDEO FORMAT
rely solve the problem (plge 31).
Connect the TV and Ihe unit using a vide() jack
other than the HDMI OUT, and switch the TV_s
input to the connected vide() input so that you can
see the on-screen displays. Change the type of
video signal output from the HDMI OUT.iacL
and switch the TV's input back to HDMI. If the
picture still does not appear, repeat the steps and
try other options.
• You have selected "PROGRESSIVE" using the
VIDEO FORMAT button on the remote
/"PROGRE" lights up in the front panel display)
even though your TV cannot accept the
progressive signal. In this case. disconnect the
HDMI cord from the unit and then select
"INTERLACE"so that "PROGRE"turns off.
• lfthe signal flom the S VIDEO OUT jack is
distorte& change the type of video signal output
from the HDMI OUT jack by pressing VIDEO
FORMAT to [720 x 480p]" (page 31).
" Depending on the country, [72(}x 576p] may
appear.
Picture noise appears.
• The disc is dirty or Ila_ed.
• If the picture output from your system goes
through your VCR to get to your TV, the copyprotection signal applied to some DVD programs
could affect picture quality. If you still experience
problems even when you connect your unit
directly to your TV, try connecting your unit to
your TV's S vide() input (page 3(1).
Even though you set the aspect ratio in [TV
TYPE] of [SCREEN SETUP], the picture does
not fill the TV screen.
• The aspect ratio on the disc is fixed.
Color irregularity occurs on the TV screen.
The subx_oofcr and the front speakers in this system
are magnetically shielded to prevent magnetic
leakage. However, some leakage may occur, as a
high-strength magnet is employed. If this happens,
check the following items:
• If the speakers are used with a CRT-based TV or
pr(_jector, install the speakers at least 0.3 meters
/ 1.0 fl) from the TV set.
• lfthe color irregularity persists, turn off the TV set
once, then turn it on after 15 to 30 minutes.
• Make sure that no magnetic object (magnetic latch
on a TV stand, heahh care device, toy, etc.) is
placed near the speakers.
Sound
There is no sound.
• The speaker cord is not connected securely.
• Press MUTING on the remote if"MUTING ON"
is displayed in the front panel display.
• The system is in pause mode or in Slow-motion
Play mode. Press 1:::>to return to normal play
n/ode.
• Fast forward or fast reverse is perfonned. Press
[2:>-to return to normal play mode.
• Check Ihe speaker settings (page 92).
• The equipment connected to the HDMI OUT jack
does not conform to the audio signal fommt, in
this case set [AUDIO/HDMI)] in [CUSTOM
gETUP[ to [ON] (page 91).
No sound is output from the HDMI OUT jack.
• Set [AUDIO (HDMI)I in [CUSTOM SETUPI to
[ON] (page 91 ).
• The HDMI OUT jack is connected to a DVI
(digital visual interface) device (DVI (digital
visual interface)jacks do not accept audio
signals).
• T U the following: (_) Turn the system oft"and on
again. @ Turn the connected equipment off and
on again. @ Disconnect and then connect the
HDMI cord again.
The left and right sounds are unbalanced or
reversed.
D.
D.
a"
• Check Ihat the speakers and components are
connected correctly and securely.
There is no sound from the subwoofer.
• Check the speaker connections and settings (page
19, 92).
• Set the sound field to "A.F.D. STD" (page 42),
Severe hum or noise is heard.
• Check that the speakers and components are
connected securely.
• Check that the connecting cords are away from a
transformer or motor, and at least 3 meters ( 10 It)
away from your TV set or a fluorescent light.
• Move your TV away from the audio components.
• The plugs and.jacks are dirty. Wipe Ihem with a
cloth slightly moistened with alcohoh
• Clean the disc.
• If howling occurs, reposition the speakers farlher
away from the TV set.
continued_
g7us
The sound loses stereo effect when you play a
VIDEO CD, a CD, or an MP3.
• Set [AUDIO]
to [STEREO]
hy pressing
AUDIO
tuning.
• No st aions have been preset or the preset stations
have been cleared (when tuning by scanning
(page 52)
• Make sure the unit is connected
• The signal strenglb of the stations is too weak
(when tuning ill with automatic tuning) Use direct
properly
preset stations)
The surround
effect is difficult
you are playing a Dolby
audio sound track.
Digital,
to hear when
DTS, or MPEG
• Make SLIl"t'the sound field function
• Check the speaker connections
19, 92)
is on (page 42).
and settings (page
• Depending on the DVD, the output signal may not
be the entire 5 1 channeh It may be monaural or
stereo even if the sound track is recorded
Digital or MPEG audio format
in Dolby
The remote
• There
comes
from
the center
is heard
from
the center
• Depending
is on (page 42).
on the source, the effect of the center
speaker may be less noticeable
• A 2 channel
• Check the speaker connections
19, 92)
is
• The distance
too far.
between
is on (page 42).
• Depending on the source, the effect of the
surround speakers may be less noticeable
• A 2 channel
• The remote is not pointed
the unit
from the speakers
in the front
panel
which output
The beginning
of the
• Set the Movie/Music
'MUSIC"
that are
display.
at the remote sensor on
ill the remote are weak
is no disc inserted
• The disc is upside down
side facing
• The disc is skewed
on the disc tray
• The system cannot
play CD-ROMs,
down
etc (page 6)
• The region code on the DVD does not match
system.
• Moisture
has condensed
Ihe
inside the unit and may
• The DATA
to ISO 9660 Level
l/Level
2, or
DVD is not recorded in an MP3
that conforn>
to UDF (Universal
Disk
"MP3."
• The data is not MPEGI
sound (page 42, 82).
sound
is cut off.
mode to "MOVIE"
that conforms
Joliet.
• The data is not formatted ill MP3 even though
has Ibe extension ".MP3."
• The system cannot
format.
Audio
[IMAGE
(JPEG)]
• If you cannot
Operation
Layer 3 data.
setting has been set to
(page 62).
change
setting, reqoad
it
play audio tracks in MP3PRO
• The [MODE (MP3, JPEG)]
or
(page 41 ).
• Set the sound field to "A E.D. STD" (page 42)
the [MODE
(MP3, JPEG)]
the disc or turn the system of L then
on.
stations
cannot
• Check that the antenna
be tuned
Adjust the antenna (aerial) or connect
antenna
The 3PEG image file cannot be played.
• The DATA CD is not recorded in a JPEG l()rmat
in.
(aerial) is c(mnectcd
(aerial) if necessary
an
that conforms
Joliet.
• The DATA
that conforms
g8us
and the unit is
Format).
• The MP3 audio track does not have Ihe extension
• Tile front panel display indicates the selected
ISPEAKER FORMATION]
It does not indicate
the speakers
• There
format
source is being played
is no sound
securely
the remote
The MP3 audio track cannot be played.
• The DATA CD is not recorded in the MP3 lbrmat
and settings (page
• Make sure the sound field function
external
and the
cause damage to Ihe lenses Remove Ibe disc and
leave the unit turned on lk)r about half all hour.
source is being played
No sound or only a very low-level
sound
heard from the surround speakers.
Radio
the remote
Insert the disc with the playback
speaker.
and settings (page
• Make sure the sound field function
indicated
between
unit.
The disc does not play.
• Check the speaker connections
19, 92)
There
ill
speaker
• Depending on tile disc, the sound may come from
the center speaker only
No sound
ap?ears
does not function.
are obstacles
• The batteries
The sound
only.
Preset the stations (page 65)
• Press DISPLAY so that the frequency
the front panel display
to ISO 966(t Level
DVD is not recorded
to UDF (Universal
l/Level
in aJPEG
2, or
format
Disk Format).
• It has an extension other than ".JPEG" or ".JPG."
• It is larger than 3,072 (width) x 2,048 (height) in
normal mode, or more than 2,000A)00 pixels in
Progressive JPEG which is mainly used on the
lnternet WEB site.
• It does not fit the TV screen (those images are
reduced).
• The ]MODE (MP3, JPEG)] setting has been so to
]AUDIO (MP3)] (page 62).
• If you cannot change the ]MODE (MP3, JPEG)]
setting, reqoad the disc or turn the system off, Ihen
OIl.
The MP3 audio tracks and JPEG image file
starts playing simultaneously.
• [AUTO] has been selected in [MODE (MP3,
JPEG)] (page 62).
The titles of album/track/file name are not
displayed correctly.
• Tile system can only display numbers and letters
of the alphabets. Other characters are displayed as
I'F
A disc does not start playing from the
beginning.
• Program Play, Shullle Play, or Repeat Play has
been selected.
Press CLEAR to cancel these functions beR)re
playing a disc.
• Resume Play has been selected.
During stop, press • on the unit or the remote and
then start playback (page 47).
• The title, DVD or PBC metal automatically
appears on the TV screen.
The system starts playing the disc
automatically.
• The DVD l_'aturcs an auto playback function.
Playback stops automatically.
• Some discs may contain an auto pause signah
While playing such a disc, the system stops
playback at the auto pause signah
You cannot perform some functions such as
Stop, Search, Slow-motion Play, or Repeat
Play.
• Depending on the disc, you may not bc able to
perform some of the oper itions above. See the
operating instructions that canle with the disc.
Messages do not appear on the IV screen in
the language you want.
• In the Setup Display, select the desired language
for the on-screen display in [OSD] under
[LANGUAGE SETUP] (page 88).
The language for the sound track cannot be
changed.
• Multilingual tracks are not recorded on the DVD
being played.
• The DVD prohibits changing the hmguage for the
sound track.
The subtitle language cannot be changed.
• Multilingual subtitles are not recorded on the
DVD being played.
• The DVD prohibits changing the subtitles.
The subtitle cannot be turned off.
• The DVD prohibits turning off subtitles.
The angles cannot be changed.
• Multi-angk's arc not recorded on the DVD being
played (page 56).
• The DVD prohibits changing the angles.
A disc cannot be ejected and "LOCKED"
appears in the front panel display.
• Contact your Sony dealer or local authorized Sony
service facility.
[Data error] appears on the IV screen when
playing a DATA CD or DATA DVD.
• The MP3 audio track/JPEG image file you want to
play is broken.
• The data is not MPEGI Audio Layer 3 data.
• The JPEG image file format does not conff)rm to
DCE.
• The JPEG image file has the extension ".JPG" or
".JPEG," but ix not ill JPEG format.
8"
The system does not work normally.
• Disconnect the AC po_ er cord (mains lead) from
the wall outlet (mains), then reconnect after
several lilinutes.
The unit does not work and "CHILD LOCK"
appears in the front panel display when you
press any button on the unit.
• Set the child lock function to off (page 78).
The HDMI CONTROL function
does not work.
• When "HDMI" does not light up ill the front panel
display, check the HDMI connection (page 30).
• Set the [HDMI CONTROL] setting ill [CUSTOM
SETUP] to [ON] (page 90).
• Make sure that Iheconnected component ix
compatible with the HDMI CONTROL lhnction.
• Check that the AC power cord (mains lead) of the
connected
component
iSconnected securely.
• Check the connected component's setting for the
HDMI CONTROL function. See the operating
instructions of the component.
continued_
99us
• lfyou change the HDMI connection, connect and
disconnect the AC power cord (mains lead), or
have a power failure, set the [HDMI CONTROL]
setting in [CUSTOM SETUP] to [OFF], then set
the [HDMI CONTROL] setting in [CUSTOM
SETUP] to [ON] (page 90).
• For details on the HDMI CONTROL function, see
the HDMI CONTROL Guide (supplied
separately).
No sound is output from the system and TV
while using the System Audio Control
function.
(When letters/numbers
display)
appear in the
When the self-diagnosis function is activated to
prevent the system lix)m malt_mctioning, a 5=
character service number (e.g., C 13 50) with a
combination of a letter and 4 digits appears on
the TV screen or t>ont panel display.
check the following table.
• Set the IAUDIO (HDMII] setting in ICUSTOM
SETUP] to [ON] (page 91).
• Make sure that the connected TV is compatible
with the System Audio Control function.
• For details on the System Audio Control limction,
see the HDMI CONTROL Guide (supplied
separately).
_,C:
In this case.
li3:5_'_
First 3
characters of
the service
number
Cause and/or corrective action
C 13
The disc is dirty.
,,,,l_Cleanthe disc with a soft cloth
C 31
The disc is not inserted correctly.
(page 96).
,,,,l_Restartthe system, then re-insert
the disc con'ectly.
E XX
To prevent a mallilnction, the
(xx is a number) system has perlk_rmed the selfdiagnosis flmction.
,,,,l_Contact your nearest Sony
dealer or local authorized Sony
sel_.ice facility and give the 5character ser'.ice ntlnlber.
Example: E 61 10
When
number
displaying
on the
the
TV
version
screen
When you turn on the system, the version
number [VER.X.XX] (X is a number) may
appear on the TV screen. Although this is not a
malfmlction and for Sony service use only,
normal system operation will not be possible.
Turn off the system, and then turn on the system
again to operate.
100Us
AUDIO
POWER
SPECIFICATIONS
for the US model
POWER OUTPUT
DISTORTION:
AND TOTAL
HARMONIC
With 3 ohms loads, both
channels driven, fronl 120
- 20,000 Hz; rated 84 watts
per channel
minimum
RMS power, with no more
than 0.7 % total harmonic
distortion
from 250 milli
watts to rated output.
Amplifier
section
Surround mode (reference)
RMS output power
FL/FR/C/SL/SR*:
143 watts
(per channel at 3 ohms, I
kHz, 10 elk THD)
Subwoofcr":: 285 watts (at
1.5 ohms, 80 Hz, 10 c/_
THD)
Video section
* Dependi_igonthesonndfiehlsettin,g,_andthe_ource,
Outputs
there may be no sound output.
Inputs (Analog)
TV (AUDIO IN)
SAT/CABLE
AUDIO IN
Sensitivity:
(AUDIO
IN) Sensitivity:
Sensitivity:
Inputs (Digital)
SAT/CABLE
(COAXIAL
450/250
IN/OPTICAL
IN)
75 ohms_
(Analog)
Phones
Accepts low-and highimpedance headphones.
DVD system
Laser
Semiconductor
contin/Ious
Signal format
Tuner
system
NTSC
section
System
PLL quartz-locked
synthesizer
digital
F[VI tuner section
Tuning range
North American
models:
87.5-108.0 MHz (100 kHz
Other models:
step)
87.5-108.0 MHz 150 kHz
Antenna
step)
FM wire antenna (aerial)
(aerial)
Inputs
laser
(DVD: k = 650 nm)
(CD: L = 790 nm)
Emission duration:
VIDEO: I Vp-p 75 ohms
S VIDEO:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
COMPONENT:
Y: I Vp-p 75 ohms
PB/CB, Pr/Cr: 0.7 Vp-p
75 ohms
mV
450/250 mV
250/I 25 mV
hnpedance:
Outputs
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Norlh American, Mexican, and Latin American
models:
53(1 1,710 kHz(with the
interval set at 10 kHz)
531 1,710 kHz(with the
interval set at 9 kHz)
European, Russian, and Middle Eastern models:
531 1,602 kHz (with the
interval set at 9 kHz)
Australian and New Zealand models:
531 1,710 kHz(with the
interval set at 9 kHz)
530 1,710 kHz(with the
interval set at 10 kHz)
Other models:
531 1,602 kHz (with the
interval set at 9 kHz)
53(1 1,610 kHz (with the
interval set at 10 kHz)
Antenna (aerial)
AM loop antenna (aerial)
450 kHz
Intermediate frequency
D..
D.
8"
HDMI OUT: Type A 119
pin/
SAT/CABLE:
1 Vp-p 75 ohms
COMPONENT:
Y: I Vp-p 75 ohms
PB/CB, Pr/Cr: 0.7 Vp-p
75 ohms
Speakers (DAV-HDX500)
Front (SS-TS74)
Speaker system
Two way, Bass reflex,
magnetically shielded
Speaker unit
Woofer: 65 mm (2 518
inches) dia, cone type x 2
Tweeter: 50 mm 12 inches)
Rated impedance
dia, cone type
3.0 ohms
continued_
101us
Dimensions (approx.)
111 x 827 x 75 mm 14318 x
32 518x 3 inches) (w/hid)
316 x 1,041 - 1,339 x 316
mmll2V2x41-523/4
x 12
V2 inches)
stand
Mass (approx.)
Speaker unit
Rated impedance
Dimensions (approx.)
Mass (approx.)
Surround (SS-TS72)
Speaker systc,
m
Speaker unit
Rated impedance
Dimensions (approx.)
Mass (approx.)
Speaker unit
30 x 60 mm (1 3/16x 2 318
Rated impedance
Dimensions/approx./
inches), cone type
3.0 ohms
381 x 48 x 62 mm
(15 x 1 _5/16x 2 _h inches)
(w/h/d)
Mass/approx.)
0.5 kg (I lb 2 oz)
Close& magnetically
shielded
30 x 60 mm (1 3/1(,x 2 3/s
Surround
(SS-TS71)
Speaker system
inches), cone type
3.0 ohms
381 x 48 x 62 mm
115 x 1 's/l(,x 2 V2inches)
lw/h/d)
0.5 kg (1 lb 2 oz)
Speaker
Bass reflex, magnetically
shielded
65 mm 12 5Isinches) dia,
cone type
3.0 ohms
93 x 221 x 75 mm 13 3/4x
8 314x 3 inches) (w/h/d)
1).7 kg (1 lb 9 oz)
Rated
(SS-WS74)
Speaker system
Speaker unit
Rated impedance
Dimensions (approx.)
Mass (approx.)
impedance
Dimensions/approx./
Mass (approx.)
Subwoofer
(SS-WS74)
Speaker system
Speaker unit
Bass
Mass (approx.)
102Us
rel_ex
160 mm (6 3Is inches) dia,
Rated impedance
Dimensions/approx./
cone type
1.5 ohi/ns
220 x 394 x 35(1 mm 18 _h
x 15 5/8 x 13 7/8inches)
lw/h/d)
6.5 kg (14 lb 6 oz)
General
Bass reflex
160 mm 16 3/s inches) dia,
cone type
1.5 ohms
220 x 394 x 350 mm 183h
x 15 % x 13 7/8inches)
lw/h/d)
6.5 kg (14 Ib 6 oz)
Speakers (DAV-HDX501W)
Front (SS-TS73)
Speaker system
Bass reflex, magnetically
shielded
65 mm 12 5Isinches) dia,
Speaker unit
Rated impedance
Dimensions (approx.)
Bass reflex, magnetically
shielded
65 mm 12 % inches) dim
cone type
3.0 ohms
93 x 162 x 75 mm (3 3/4x
6 _/2X 3 inches) (w/h/d)
//.6 kg (I lb 6 oz)
unit
Mass/approx./
Subwoofer
Closed, magnetically
shielded
(w/h/d) with
2.3 kg (5 lb 2 oz)
4.6 kg (It) lb 3 oz) with
stand
Center (SS-CT72)
Speaker system
Center (SS-CT72)
Speaker system
cone type
3.0 ohms
93 x 539 x 75 mm 13 3/4x
21 _h x 3 inches) (w/h/d)
300 x 1,039 - 1,23(}x 3011
mm (l I 7/8× 41 - 48 t/2x
II 7/8inches) (w/h/d) with
stand
1.2 kg (2 lb 11 oz)
3.(1 kg (6 lb 10 oz) with
stand
Power requirements
Power output (DIGITAL
Power consumption
120 V AC. 60 Hz
MEDIA PORT)
DC OUT: 5 V, 700 mA
On: 1Nil W
Standby: 0.3 W (at the
Power Saving mode)
Dimensions/approx./
DAV-HDX500:
430 x 86 x 415 mm/ 17 x
3 t/2 x 163/8 inches) (w/h/d)
DAV-HDX50I
W:
inch projecting parts
430 x 86 x 435 mm/ 17 x
3 V2x 17 % inches) (w/h/d)
inch projecting
pal_s
Mass (approx.)
DAV-HDX500:
DAV-HDX501W:
5.2 kg (l I lb 8 oz)
5.4 kg (I I lb 15 oz)
Design md specifications arc subject to change
without notice.
Unpacking
• Front speakers
(2)
• Center
(1)
speaker
• Surround
speakers
• Subwoofcr
(2)
Section of a music piece or an image on a data
• AM loop antenna
• FM wire antenna
• Speaker
Album
(1)
cords
(aerial) (1)
(aerial)
CD containing
(6, rcd/white/green/gray/hhle/pulple)
• Video Cord (1)
• Remote
Connnander
• R6 (size AA) batteries
• Calibration
(remote)
(2)
Digital
mic ( 1)
of a title ou _1DVD. A title is
of several chapters.
Cinema
Auto
Calibration
Digital Cinema Auto Calibration was developed
by Sony to automatically measure and adjusts
• Posts (2)
the speaker settings to your listening
environment in a short period of time.
(2)
• Mounting
plates (2)
• Post covers
Digital
12)
• Screws
(large, with washer)
• Screws
(small, silver) (4)
• Screws
(small, black)
• WAHT-S
Chapter
Subdivision
composed
(1)
• Foot pads ( I set)
• Bases
MP3 audio tracks or JPEG files.
( 1)
(2)
D 1 (1) (DAV -H DX501W
only)
• Operating lnstluctions
• HDMI CONTROL Guide
• Speaker
md TV connections
(card)
• Voucher
(1) (DAV-HDX500
only)
Direct
Twin
Drive
Subwoofer
Utilizing Snny's proprietary S-Master
technology, the Digital Direct Twin Drive
(8)
•Standby power consumption 0.3 W (or
less).
•Halogenated flame retardants are not
used in the printed wiring boards.
•Over 85 % power efficiency of
amplifier block is achieved with the
fidl digital amplifier, S-master.
Subwnoli:r li:atures two S-Master Digital
Amplifiers that prnvide dedicated power to a
strategically located subwoofer lor astounding
sound perfnrmance. Easy to set up, Digital
Direct Twin [)rive Subwoofer provides a stable
sound field river a ntuch larger listening area
without having to adjust [requeucy levels.
Dolby
D..
D.
Digital
This ntovie theater sound l\)rmat is ntore
advanced than Dolby Surround Pro Logic. In
this l\)rmat, fl_e surround speakers output stereo
8"
sound with an expanded frequency range, and a
subwnofi:r channel tier deep bass is
independently provided. This ti)rntat is also
called "5.1" with the subwoofer channel
designed
as the 0.1 channel (since it functions
only when a deep bass effect is needed). All six
channels in this format are recorded separately
ti)r superior channel separation. Furthermore.
sittce all the signals are processed digitally, less
signal degradation
Dolby
Pro Logic
occurs.
II
Dolhy Prn Logic II creates five full-bandwidth
output channels frnnt 2 channel sources. This is
done using an advanced, high-purity matrix
surround decoder that extracts the spatial
properties nf the original recording without
adding any new sounds or tonal coloralious.
continued_
103US
• Movie mode
The Movie mode is t\>r use with stere<) television
shows and all programs encoded in Dolby
Surround. The result is enhanced sound field
directionality
that approaches
discrete 5.1 -channel sound.
the quality of
• Music mode
The Music mode is for use with any stere<) music
recordings,
and provides a wide and deep sound
space.
Dolby Surround
Pro Logic
the tk)rlner Dnlby Surround system, Dnlby
Surround Prn Logic reproduces lefl-tn-right
panning more naturally and localizes sounds
more precisely. To take fnll advantage of Dolby
Surround Prn Logic, ynu should have one pail" of
SLIFFouud
speakers and a center speaker. The
speakers nutput
nlonatlral
souud.
DTS
Digital audio compression technology
developed by DTS, Inc. This technology
conlorms to 5.l-channel
surround. This lormat
comprises of stereo rear channel and there is
discrete subwoofer channel in this format. DTS
provides the same 5.1 discrete channels
quality digital audio. The good channel
of high
separaOnu is realized due to the all channel data
being recorded discretely and prncessed in
digitally.
A disc that contains up to 8 hours of moving
pictures even though its diameter is the same as
a CD.
single-layer
and single-
sided DVD, at 4.7 GB (Giga Byte), is 7 times
that of a CD. Furthermore, the data capacity nf a
duaElayer and single-sided DVD is 8.5 GB, a
singleqayer and double-sided DVD 9.4 GB, and
a duaMayer and double-sided DVD 17 GB.
The picture data uses the MPEG 2 l\_rmat, one of
a worldwide standard of digital compression
technology. The picture data is compressed to
about 1/40 of its original size. The DVD also
uses the variable rate coding technology
104Us
data according
to the status
in Dolby Digital as
well as in PCM, allowing you tn enjoy more
realistic audio presence.
Furthermore, various advanced flmctious such
as tl_e multi-angle, multilingual, and Parental
Control fnnctions are provided with the DVD.
DVD+RW
lormat that is comparable
lormat.
to the DVD VIDEO
DVD-RW
A DVD-RW is a recnrdable and rewritable disc
that is the same size as a DVD VIDEO. The
DVD-RW has two different modes: VR mode
and Video mode. DVD-RWs created in Video
mode have the same format as a DVD VIDEO,
while discs created in VR (Video Recording)
mode allow the contents to be programmed or
edited.
File
A JPEG image recnrded on a DATA CD/DATA
DVD. ("File" is an exclusive definition for this
system.) A single file consists of a single image
or
nlovie.
Film based
software
software,
DVDs can he classified
based software.
Video
based
as Fihn hased or Vide<)
Fihn based DVDs contain
the
same inmges (24 lbames per second) that are
shown at movie theaters. Video based DVDs,
DVD
The data capacity nfa
allocated
of the picture.
The audio data is recorded
A DVD+RW (plus RW) is a recordable and
rewritable disc. DVD+RWs use a recording
As one method of decoding Dolby Surround,
Dolby Surround Pro Logic produces four
channels from 2 channel sound. Compared with
surround
processes
that
such as television
dramas or sit-corns,
displays
images at 30 frames (or 60 fields) per second.
HDMI (high-definition
interface)
multimedia
HDMI is an interthce that supports both video
and audio nu a single digital connecdnn,
allowing you to enjoy high quality digital
picture and sound. The HDMI specification
supports HDCP (High-bandwidth
Digital
Contents
Protection),
a copy protection
technology that incorporates
lk)r digital vide<) signals.
coding technology
Interlace
format
(interlaced
Tile Interlace
scanning)
format is the NTSC standard
Progressive
format
(sequential
scanning)
In contrast to the Interlace format, the
method fk)r displaying TV images at 30 l]'ames
per second. Each frame is scanned twice -
progressive l\_rmat can reproduce 50 - 60 fi'ames
per second by reproducing all scanning lines
alternately
scanning
(525 lines li_r the NTSC system).
lines, at
picture quality increases and still images, text
and horizontal lines appear sharper. This format
between the even numbered
lines and then odd numbered
60 times per second.
MPEG
scanning
is compatible
li)rmat.
audio
The overall
with the 525 or 625 progressive
A coding system to compress digital audio
signals. MPEG-1 is used for MP3 (MPEG-I
Region
Audio Layer-3). MPEG-2
audio format of DVD.
This system is used to protect copyrights. A
region number is allocated on each DVD system
Multi-angle
is used lot one of the
function
Various angles of a scene, or viewpoints of the
video camera are recorded on some DVDs.
Multilingual
Several
function
languages
for the sound or subtitles in a
picture are recorded
Neural
on some DVDs.
aS the chosen formal ['or XM
new XM HD Surl'ound
TM,
programming
will deliver the excitement of
surround music to more of America's listening
audience. It provides the rich envelopment and
discrete image detail of surround sound in a
lormat
10()r;{ compatible
Parental
with stereo.
Control
A function of the DVD to limit playback of the
disc by the age of the users according to the
limitation level in each country. The limitation
varies from disc to disc; when it is activated,
playback
is completely
or DVD disc according to the sales region. Each
region code is shown on the system as well as on
the disc packaging. The system can play discs
that match its region code. The system can also
play discs with the "{_ " mark. Even when the
region code is not shown on the DVD, the region
limit may still apply.
Scene
Surround
Neural Surrouud
Satellite Radio's
Code
prohibited,
violent
On a VIDE()
CD with PBC q_layback control)
limctions, the menu screens, moving pictures
and still pictures are divided into sections called
"scenes."
1>
Q.
D.
Title
The longest section of a picture or music feature
on a DVD, movie, etc., in video software, or the
entire album in audio software.
Track
Section of a picture or a music piece on a
VIDEO CD, CD, or MP3. An album is
composed
of several tracks (MP3 only).
scenes are skipped or replaced with other scenes
and so on.
PCM (Pulse
A method
Code
l\)r converting
Modulation)
analog audio to digital
audio. It is used for the Compact Disc (CD)
audio t_rlnat.
Playback Control (PBC)
Signals encoded on VIDEO CDs (Version 2.0)
to control playback.
By using menu screens recorded on VIDEO
CDs with PBC timctions, you can enjoy playing
simple interactive programs, programs with
search fnnctions, and so on.
continued_
105Us
VIDEO
CD
A compact disc that contains moving pictures.
The picture data uses the MPEG 1 l\_rmat, one of
a worldwide standard of digital compression
technology. The picture data is compressed to
about 1/140 of its original size. Consequently,
a
12 cm VIDEO CD can contain up to 74 minutes
of moving pictures.
VIDEO CDs also contain compact audio data.
Sounds outside the range of human hearing are
compressed while sounds we can hear are not
compressed. VIDEO CDs can hold six times the
audio inl\_rmation of conventional audio CDs.
There are two versions of VIDEO CDs.
• Version 1.1: You can play only moving
pictures and sounds.
• Version 2.0: You can play high-resolution
pictures and enjoy PBC functions.
This system conforms to both versions.
106Us
still
The language spellings conlbrm to the 1SO 639:1988 (E/F) standard.
Code Language
Code Language
Code Language
Code Language
1027 Afar
1028 Abkhazian
1183 Irish
1186 Scots Gaelic
1347 Maori
1349 Macedonian
1507 Samoan
1608 Shona
1032
1039
1044
1045
Afrikaans
Amharic
Arabic
Assamese
1194
1196
1203
1209
Galician
Guarani
Gujarati
Hausa
1350
1352
1353
1356
Malayalam
Mongolian
Moldavian
Marathi
1609
1611
1512
1513
Somali
Albanian
Serbian
Siswati
1051
1052
1053
1057
1059
1060
1061
1066
1067
1070
1079
1093
1097
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali;
Bangla
Tibetan
Breton
Catalan
Corsican
Czech
1217
1226
1229
1233
1235
1239
1245
1248
1253
1254
1257
1261
1269
1283
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
1357
1358
1363
1365
1369
1376
1379
1393
1403
1408
1417
1428
1435
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan)Oromo
Oriya
Punjabi
Polish
Pashto;
Pushto
1514
1616
1516
1517
1521
1525
1527
1528
1529
1531
1532
1534
1535
1538
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
1103
1106
1109
1130
1142
1144
1145
1149
1150
1151
1157
1165
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
1287
1297
1298
1299
1300
1301
1305
1307
1311
1313
1326
1327
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
1436 Portuguese
1463 Quechua
1481 RhaetoRomance
1482 Kirundi
1483 Romanian
1489 Russian
1491 Kinyarwanda
1495 Sanskrit
1498 Sindhi
1501 Sangho
1502 Serbo-
1539
1540
1543
1657
1564
1572
1581
1587
1613
1632
1665
1684
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volap_Jk
Wolof
Xhosa
Yoruba
Chinese
1166 Fiji
1171 Faroese
1174 French
1332 Lithuanian
1334 Latvian;
Lettish
Croatian
1603 Singhalese
1605 Slovak
1697 Zulu
1181 Frisian
1345 Malagasy
1606 SIovenian
1703 Not specified
Parental
Control
Area Code
List
Code Area
Code Area
Code Area
Code Area
2044
2047
2046
2057
2070
2079
2090
2092
2115
2165
2174
2109
2248
2238
2254
2276
2304
2363
2362
2376
2390
2379
2427
2424
2436
2489
2501
2149
2499
2086
2528
2184
Argentina
Australia
Austria
Belgium
Brazil
Canada
Chile
China
Denmark
Finland
France
Germany
India
Indonesia
Italy
Japan
Korea
Malaysia
_>
Mexico
Netherlands
New Zealand
Norway
Pakistan
Philippines
Portugal
Russia
Singapore
Spain
Sweden
Switzerland
Thailand
United
Kingdom
107Us
For more intimnation,
Front
refer to the pages indicated
in parentheses.
panel
%%
108US
[]
I/_ (on/standby)
[]
VOLUME control (37)
[]
_ (open/close)
(37)
(37)
[]
AUDIO IN/A.CAL MIC jack (24, 34)
[]
Disc operation
(37)
[]
DISC 1-5 buttons/indicators
[]
FUNCTION (37)
[]
Disc tray (37)
[]
Front panel display (110)
[]
[] (remote sensor) (9)
[]
PHONES jack (37)
(37)
Rearpanel
[]
SPEAKER jacks (19)
[]
[]
SAT/CABLE
jack (34)
DMPORT1 (DIGITAL
jack (34, 77)
[]
MONITOR OUT (S VIDEO/VIDEO)jacks
(30)
[]
XM jack (68)
[]
COMPONENT
(DIGITAL IN COAXIAL)
[]
SAT/CABLE (COMPONENT
jacks (34)
[]
DIR-TC1 slot for the WAHT-SD1
[]
SAT/CABLE (AUDIO IN R/L, VIDEO IN)
jacks (34)
[]
SAT/CABLE
jack (34)
[]
AM terminal (19)
[]
RDMI OUT jack (30)
[]
FM 75£_ COAXIAL jack (19)
[]
DMPORT2 (DIGITAL
jack (34, 77)
[]
VIDEO IN)
(34)
MEDIA PORT2)
TV (AUDIO IN R/L) jacks (34)
'_'_\
MEDIA PORT1)
VIDEO OUT jacks (30)
(DIGITAL IN OPTICAL)
D.
CAUTION
Please do not remove tile scre_s before
installi ng the WAHT=SD 1.
-I
8"
-t
continued_
109US
Front
panel
About
the
[]
110US
display
indications
in the front panel
display
Lights up when the HDMI OUT jack is
correctly connected to HDCP (highbandwidth digital content protection)
compliant device with HDMI or DVI
(digital visual interface) input. (30)
[]
Lights up when the child lock function
is set to on. (78)
[]
Lights up when the system outputs
progressive signals (DVD function
only). (32)
[]
Lights up when thetime information of
a title or chapter appears in the front
panel display. (DVD only) (54)
[]
Indicates the selected [SPEAKER
FORMATION]. (82)
[]
Lights up when Digital Cinema Sound
[]
Lights up when a station is received.
(Radio only) (65)
[]
Stereo/Monaural
(68)
[]
Lights
(75)
[]
Lights up when the movie or music
mode is selected. (41)
[]
Playing
[]
Light up when you select "ONE CAT"
during receiving the XM radio. (67)
[]
Current
(DCS) is activated. (42)
[]
effect (Radio only)
repeat
mode (51)
only)
(Except for
JPEG)
[]
Lights up when the DYNAMIC BASS is
selected. (75)
[]
Displays system's status such as
chapter, title, or track number, time
information, radio frequency, playing
status, sound field, etc.
up when the sleep timer is set.
status (DVD function
Current surround format
Use the Control Menu display to select a function and Io view related information.
repeatedly to mrn on or change Ihe Control Menu display as follows:
I
Press <23DISPLAY
Control Menu display 2 (appears for cel_ain discs only)
Control Menu display I
5"
Control Menu display olT
-I
5"
Control
Menu display
8"
The Conlrol Mmm display 1 and 2 will show different ilems depending on Ihe disc lype. For details
about each item, see the pages in parentheses.
5"
Example: Control Menu display I when playing a DVD VIDEO.
con#nued_
111us
...............
Currently
playing title number l!
Currently
playing chapter number 2!
Total number of titles j)
Playback status
(IP- Playback,
|| Pause,
• Stop, etc.)
Total number of chapters 2)
Control
Menu
Type of disc being
played 3)
Playing time 45
Selected item
g
OFF
Function name of
selected
Menu item
Operation message
J) Displays the scene number R)r VIDEO
DATA CDs/DATA
DVDs.
25Displays the index number lbr VIDEO
DATA DVDs.
3! Displays
display
45Displays
Super VCD as "SVCD."
2 fer DATA CDs/DATA
CDs (PBC is en), track number
CDs, MP3 audio track number,
Displays
"MP3"
in the (;entrel
R)r VIDEO
CDs/CDs,
album
number
or JPEG image file number lbr DATA CDs/
Menu display
1 or "JPEG"
in the Cenm)l
DVDs.
the date lbr JPEG files.
To turn off the display
Press O DISPLAY.
List of Control
Item
Menu
items
Item Name, Function,
Relevant
Disc Type
[TITLE] (page 46)/[SCENE] [page 46)/[TRACK]
Selecls Ihc lille, scene, or Irack le be played.
(page 46)
_
_
[CHAPTER] (page 46)/[INDEX] (page 46)
Selecls Ihc chapter or index le bc played.
_
_
[TRACK] (page 46)
Selecls Ihc Irack te bc phtycd.
_
_
[ORIGINAL/PLAY
LIST] (page 54)
Selects the type ef titles (DVD-RW/DVD-R)
to bc played, the [ORIGINAL]
[PLAY LIST].
[TIME/TEXT] (page 46)
Checks Ihe elapsed time and the remaining
Input the time cede lbr picture
Displays the DVD/CD
112us
playback
and music searching.
text or the MP3 track name.
R)r
time.
one, or an edited
Menu
[SPEAKER FORMATION] (pages 82, 84)
Sets the speaker formation./Adjust
the level of each speaker
automatically.
[PROGRAM] (page 48)
Selects Ihe Irack to play in Ihc order you want.
[SHUFFLE]
_
(page 50)
Playsthe.trackin random
ord_.r.
[REPEAT] (page 51)
Plays the entire disc (till titles/all
_
tracks/all
rep_'atedly.
alhum s) repeatedly
I_E
I_
_
_
or one title/chapter/track/album
_
_
_
_
_
_
_
[NV SYNC] (page 57)
A@,sts
the deh,y b_._x_,rec.nthe picture
[PARENTAL
CONTROL]
_lnd sot, nd.
(page 79)
setsto prohil_i_
playhackonthissys_,m. I_
[SETUP]
[QUICK]
I_l
_
(page 86)
Setup (page 24)
Use Quick Setup to choose
the desired
language
the TV, speaker
and choose
yes or no to start the Auto Calibration.
formation,
[CUSTOM] Setup
In addition to the Quick Setup
of the on-screen
setting, you call a{iust various
display,
the aspect
ratio of
other settings.
IRESETI
Returns
the settings ill
ISETUP]to
the defimlt setting.
[ALBUM] (page 46)
Selects the album Io be played.
_
[FLEE] (page 46)
Selects Ihe JPEG image file Io be phlycd.
_
[DATE] (page 56)
Displays Ihe date Ihe piclure
_
was laken by a digital camera.
[INTERVAL] (page 62)
Specifies the duralion for which Ihe slides are displayed
on the TV screen.
_
[EFFECT] (page 63)
Selects Ihe effecls Io hc used for changing
a slide show.
_
slides during
[MODE (MP3, JPEG)] (page 62)
Selects the data type: MP3 audio track (AUDIOL
to be phlyed when playing
a DATA
CD/DATA
5"
JPEG image file (IMAGE)
DVD.
or both (AUTO)
_
• The Control Menu icon indicalor lights up ill green
-..+
when you select any item except [OFF]
([PROGRAM], [SHUFFLE], [REPEAT], and [A/V SYNC] only). The [ORIGINAL/PLAY LIST] indicator lights
up ill green when you select [PLAY LIST] (default setting).
113Us
You can set the following
The order
of the displayed
LANGUAGE
f
items with the DVD Setup
items may be different
SETUP
CUSTOM
Display.
from the actual display.
SETUP
OSD*
HDMI
TOFF
MENU".'
CONTROL
LON
STB
SYNCHRO
T OFF
LON
AUDIO".'
L_ SUBTITLE",'
PAUSE_
MODE L
AUTO
FRAME
TRACK _
SELECTION
OFF
AUTO
MULTI-DISC_
RESUME
ON
OFF
AUDIO DRC _OFF
I-STANDARD
L MAX
AUDIO_OFF
(HDMI)
SCREEN SETUP
- TV TYPE
t-ON
SPEAKER SETUP
--]-
16:9
I--4:3 LETTER
CONNECTION FRONT --
NONE
L 4:3
BOXPAN SCAN
- YCBCdRGB (HDMI) _
L-SCREEN_ON
SAVER L_
BACKGROUND
T
JACKET
|
PICTURE
I--GRAPHICS
I-- BLUE
_- BLACK
BLACK LEVEL
_
YCBCR
RGB
OFF
T
ON
OFF
BLACK LEVEL T
(COMPONENT L
OFF
ON
OUT)
SURROUND
CENTER_ T YES
YES
NONE
SUBWOOFER- YES
DISTANCE _(FRONT) I-
L
R
_
L_
FULL
NORMAL
L
CENTER -- 0 ft - 23 ft/O.O0m - 7.01 m
SUBWOOFER-0 ft - 23 ftJO.O0m - 7.01 m
DISTANCE _- L
(SURROUND) L_R
114us
Ihe language
0 ft - 23 ft/O.O0m- 7.01 m
0 ft - 23 ft/O.O0m - 7.01 m
LEVEL _L
(FRONT)
---6.0dB-+6.0dB
I- R --6.0 dB - +6.0 dB
-- -6.0 dB - +6.0 dB
LCENTER
SUBWOOFER
--6.0
dB - +6.0 dg
LEVEL _L
(SURROUND) L R -TEST TONE
,I: Select
0 ft - 23 ft/0.00 rn - 7.01 m
0 ft - 23 ft/O.O0m - 7.01 m
/
/
4:3 OUTPUT
YES
you want Io use from Ihe displayed
language
_
OFF
L-ON
list.
-6.0 dB - +6.0 dB
-6.0 dB - +6.0 dB
You can set the following
System
items with SYSTEM
MENU
on the remote.
menu
MEMORY j) --MEMORY
1-20 (FM), MEMORY1-10
(AM), MEMORY1-30
(XM)
FM MODE 2! _STEREO
LMONO
NAME IN j)
SLEEP
DIMMER
SLEEP OFF, SLEEP 90M-1M
--]-DIMMER
LDIMMER
ILLUM MODE_ILLUM
LILLUM
DEMO
--]-DEMO
ON
OFF
ON
LDEMO OFF
ATTENUATE 3/ _ATT
LATT
ON
OFF
SL SR REV4)_REV
LREV
OFF
ON
/
CHILD LOCK
OFF
ON
_OFF
LON
l)Appears during "TUNER FM," "TUNER AM," or "XM"only.
2)Appears during "TUNER FM" only.
3)"ATTENUATE" may not appear, depending on the selected function.
4)Appears when the wireless kit WAHT-SDI is installed.
8"
115Us
Numerics
16:9 88
4:3 LETTER BOX 88
4:3 OUTPUT 89
4:3 PAN SCAN 88
5.1 Channel Surround 53
A
A/V SYNC 57
ALBUM 46
Album 103
ANGLE 56
ATTENUATE 39
AUDIO 88
AUDIO (HDMI) 91
AUDIO DRC 91
Auto Calibration 84. 103
B
BACKGROUND 89
Batteries 9
BLACK LEVEL 89
BLACK LEVEL
(COMPONENT OUT) 89
c
CHAPTER 46
Chapter 103
Child Lock 78
CINEMA STUDIO EX 43
COAXIAL (Digital Out) 35
COLD RESET 94
COMPONENT VIDEO OUT
32
Dolby Digital 52, 103
Dolby Pro Logic I1 103
Dolby Surround Pro Logic 104
DTS 52. 104
DUAL MONO 44
DVD 104
DVD+RW 104
DVD's menu 52
DVD-RW 54. 104
DVI 31
DYNAMIC BASS 75
E
EFFECT 63
F
Fast l\_rward 45
Fast reverse 45
FILE 46
File 104
Film based software 104
FM MODE 66
Freeze Frame 45
Front panel 108
Front panel display 54. 110
H
Continuous play 37
Control Menu Display l l ]
Controlling the TV 72
CUSTOM 86
CI JSTOM PARENTAL
CONTROL 79
CUSTOM SETUP 90
Handling discs 96
HDMI
D
ILLUM MODE 38
INDEX 46
D. C. A. C. 84. 103
DATA CD 60
DATA DVD 60
DEMO 27
Demonstration 27
Digital Cinema Auto
Calibration 84. 103
Digital Cinema Sound 43
116us
Digital connection 35
Digital Direct Twin Drive
Sllbwooti:r 103
DIGITAL MEDIA PORT 77
DIMMER 76
DISC SKIP 38
DISPLAY 67
YCBCR/RGB (HDMI) 89
HDMI (high-definition
multimedia interface) 31, 104
HDMI CONTROL 90
I
Installing thespeakers on a wall
28
Instant Advance 38
Instant Replay 38
INTERLACE 33
Interlace lkwmat 105
INTERVAL 62
d
JPEG 58.60
L
Language Code Lisl 107
LANGUAGE SETUP 88
Listening
a particular point on a disc 45
other components 39
TV SOtlnd 40
M
MENU 88
MODE (MP3. JPEG) 62
MOVIE/MUSIC 41
MP3 58.60
MPEG audio 105
Multi Session CD 7
Multi-angle fllnction 56. 105
MULTI-DISC RESUME 91
Multilingual Rmction 105
Mulliplex broadcast sound 44
MUTING 38
N
Naming preset stations 66
Neural Surround 105
o
OPTICAL (Digilal Oul) 35
ORIGINAL 54
OSD 88
Other
34
COrllpollellt
coiIIleclioll
P
PARENTAL CONTROL 80
Parental Control 105
PAUSE MODE 91
PBC Playback 64
PCM (Pulse Code Modulation)
105
PICTURE NAVI 47, 61
PLAY LIST 54
Playback Control (PBC) 105
Program Play 48
PROGRESSIVE 33
Progressive format 32, 105
Q
Quick Setup 24
R
V
Radio 66
Radio Stations 65
Rear Panel 109
VIDEO CD 106
Region (7ode 8, 105
Remote 9, 72
XM-Radio 67
x
Repeat Play 51
RESET 87
Resume Play 47
s
S VIDEO 31
Scan 45
SCENE 46
Scene 105
SCREEN SAVER 89
SCREEN SETUP 88
Searching 45
Selecting 41
SETUP 86
Setup Display 86, 114
Shuffle Play 50
SLEEP 75
Slide Show 62
Slow-motion Play 45
Sound Field 42
SPEAKER FORMATION 82
SPEAKER SETUP 92
CONNECTION 92
DISTANCE 92, 93
LEVEL 93
STB SYNCHRO 90
SUBTITLE 57, 88
SYSTEM MENU 27, 38, 39,
66, 75, 76, 78
System menu list I 15
T
TEST TONE 93
THEATRE SYNC 73
TIME/TEXT 46
TITLE 46
Title 105
TRACK 46
Track 105
TRACK SELECTION 91
Troubleshooting 96
TV connection 30
TV TYPE 88
U
Unpacking 103
Usable discs 6
117us
Remote
control
i ALPHABETICAL
ANGLE
[]
+/
CATEGORY
[]
PRESET +/ [] [] (66)
SLEEP [] (75)
(68)
MODE
[]
[]
(68)
(46, 6Z 73.87)
D.TUNING
[]
(66)
DISC SKIP []
DISPLAY
[]
(52)
DVD TOP MENU
DYNAMIC
THEATRE SYNC [] (74)
TOOLS [] (72)
(54_ (37)
DVD MENU
[]
(52)
BASS []
(75)
[]
TUNIN(; +£ []
TV [] (72)
(24, 27_ 39.46_ 65_
79)
FUNCTION
[]
(32, 3Z 39.4Z
65_ 82)
MOVIE/MUSIC
MUTING
Number
[]
[]
141)
[]
[]
(65)
TV CH +_** [] (72)
TV INPUT [] (72)
TV MENU [] (72)
TV VOL +M [] (72)
VIDEO FORMAT [] (32)
VOLUME +/ [] (37, 66, 93)
(37)
buttons"*
SOUND FIELD +_"* [] (42)
SUBTITLE [] (57)
SYSTEM MENU [] (27, 3% 76,
115)
(37)
[]
BUTTON
PICTURE NAVI [] (47, 73)
(52)
CATEGORY
ENTER:"
i
(56)
AUDIO *'¢ []
CLEAR
ORDER
DESCRIPTIONS
I/(_) (on/standby)
47, 66)
[]
(24, 27, 37.
TV |/(_) (on/standby)
÷/,t./,I,/-.)/(.)
65, 79)
[]
_b.,/_,.l_
[
[]
(72)
(24, 27, 39, 46.
REPLAY/
ADVANCE
/1_1
[]
[]
(37)
[]
(37)
.,_/t,,_ [] [] (45)
_,|/m,..-[] [] (45)
12> (play)""
[]
• (stop)
(38, 47, 79)
[]
|| (pause)
[]
(38)
(open/close)
O
(37, 47, 80)
[]
DISPLAY
(38)
[]
(26, 46.79.
[]
(47)
111)
o'% RETURN
-/-- []
(73)
(4& 66_ 72_
" The ENTER
79)
flmction
button is the same
as the @ button.
"" The 12::--,number
and SOUND
5, AUDIO,
FIELD + (TV CH
+) buttons have tactile dots.
Use the tactile dots as
references
system..
Nk--------N Nb___
N>-@@@
®@@
Nb---@----
42
NE-Nk----
(7-:)
(2
__qa
m[]
when operating
the
]
2
8
9
5
9
2-895-962-11
Sony
Corporation
6
2
1
1 B
_<
(2)
Printed in China
http:/iwww.sony.net/