Series 400 Centreglaze Frame system - Nu

Design Details
Series 400
CentreGLAZE™
Shopfront Framing
Note:
The following 'Design Details' have been produced to
assist architects and designers in the use of Architectural
Window Systems (AWS) Series 400 CentreGLAZE™
framing and accompanying door systems.
All care has been taken in the production of these pages,
but Architectural Window Systems Pty Ltd can take no
responsibility for errors. If you should find any errors
please contact your local AWS sales office.
Details are subject to change without notice.The latest
information can be accessed on our web site
www.awscommercial.com.au
INDEX
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
Page Contents
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
Introduction.
Frame design features.
Door design features.
Typical configurations.
Typical configurations.
Frame options.
Frame options.
Optional narrow frame.
Mullion option - snap together.
Mullion option - interlocking.
Corner mullions.
Mullion strength.
Mullion strength.
Door option - Series 50.
Door option - Series 50.
Door option - Series 51.
Door option - Series 51.
Door option - Series 52.
Door option - Series 52.
Series 52 bead options
Door strength.
Alternative Series 50 door stiles - French rebate.
Alternative Series 50 door stiles - Wide.
Alternative Series 52 door stiles - French rebate.
Alternative Series 52 door stiles - Wide.
Light sill / transom
Heavy duty tubular sill / transom.
Nailing fin sill / transom.
Transom strength.
Hinged door head.
Hinged door transom.
Concealed overhead closer (COC) transom.
COC Transom sidelight.
Concealed overhead closer (COC) head.
Deep frame to match COC head.
COC Threshold - Double ramp - 85.
COC Threshold - Single ramp - 84.
50 and 115mm Midrails.
125mm Midrails.
Hinged door jambs.
Pivot door jamb.
External opening door threshold - 75.
Internal opening door threshold - 68.
Internal opening door threshold - 83.
Internal opening door threshold - 83.
Nursing home door threshold - 69.
Standard fixed sill.
Alternative tall fixed sill.
Sub-head and two piece sub-jamb details.
112.0
Page Contents
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
112.
50
51
52
53
54
55
56
57
58
59
69
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
Double glazed door.
Double glazed fixed lights.
Overhead sliding door - head.
Overhead sliding door - head.
Overhead sliding door - transom.
Overhead sliding door - transom.
Overhead sliding door - jamb.
Overhead sliding door - mullion.
Overhead sliding door - Light weight.
Overhead sliding door - head.
Bottom rolling door - head.
Bottom rolling door - transom.
Bottom rolling door - performance sill.
Bottom rolling door - performance sill.
Bottom rolling door - recessed sill.
Bottom rolling door - flat sill.
Bottom rolling door - mullion.
Bottom rolling door - jamb.
Bottom rolling door - jamb.
Bottom rolling door -meeting stiles.
Bottom rolling door - jamb.
ANDO™ lever lock set.
Miro lever lock set.
Lockwood 590 lock details.
Lockwood 591 lock details.
Lockwood 3580 lock details.
Lockwood 3572 lock details.
Finger operated flush bolts.
Commercial glazing adaptors.
Commercial glazing adaptors.
Aluminium fixed louvres.
Aluminium fixed louvres.
Aluminium fixed louvres in door panel.
Aluminium fixed louvres in door panel.
Adjustable glass louvre insert.
Adjustable glass louvre insert.
Awnings into commercial framing.
Awnings into commercial framing.
Awnings into commercial framing.
Awnings into commercial framing.
Awnings into commercial framing.
Awnings into commercial framing.
Flydoor adaptor.
Architectural awnings and casements.
Architectural awnings and casements.
Architectural awnings and casements.
Architectural double-hung inlay.
Architectural sashless double-hung inlay.
Architectural sliding window inlay.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
INTRODUCTION
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
JAN 07
REPLACES
JUN 06
SCALE
NOT TO SCALE
Design Features :
•
This 102 x 44mm framing system and matching doors have been
designed to be compatible with other AWS products. A large range
of extrusions have been provided to complete the package making it
easier for designers to use the products.
•
Glazing pocket in frame and doors designed to be compatible with
industry standard but with the added features of a truly captive glazing
wedge option and the ability to screw fix midrails to framing without
having to go through the back of the pocket (refer page 2 for more
information).
•
Recessed glazing wedges look cleaner and smarter.They also reduce
the chance of vandalism.
•
Three frame strengths cover most situations.
•
Three 50mm thick heavy duty door options including fully beaded. If
you want tall doors you need to know that they still comply. The
industry usual 44mm thick doors struggle when doors are more
than 2100mm high.
•
True fully rebated French meeting stiles and wide stiles available.
•
Door and frame can be glazed with glass up to 34mm thick.
•
Narrow (25mm) and wide (50mm) frames available.
•
Three midrail sizes to choose from (50, 115 and 125mm deep).
•
Some of the other custom extrusions include:
• Sub-frames.
• Nursing home door sill for hinged doors.
• Nailing fin frames for residential applications.
• Overhead and bottom running sliding door track systems.
• Awning sash inlays including concealed electric winders.
• ClearVENT™ sashless double-hung inlay adaptors.
• Flydoor adaptors.
•
Other features are shown on pages 2 and 3.
•
Full size illustrations on most of these features plus comments are
covered on the following pages and can be seen in full colour and
animation on our web site: www.awscommercial.com.au
Limitations :
•
There is a sub-head and sub-sill treatment to choose from to improve
the weather performance. But please note dry glazed shopfront
framing is not recommended for extreme exposed locations.
•
Allow for mullion expansion on units that are subject to thermal
movement.
Compatibility :
A number of compatible framing suites are available that can be coupled
or used together:
• Series 400 CentreGLAZE™ framing.
• Series 410 FoldMASTER™ Bi-fold doors and windows.
• Series 411 ViewMASTER™ Bi-fold doors and windows.
• Series 406 FrontGLAZE™ framing (102mm wide).
• Series 407 FACELINE™ framing (102mm wide).
• Series 701 SlideMASTER™ windows.
• Series 702 Performance SlideMASTER™ door (102mm wide).
• Series 704 Architectural SlideMASTER™ door (102mm wide).
• Architectural commercial windows.
Australian Registered Design
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.1
FRAME DESIGN FEATURES
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
NOV 04
REPLACES
MAR 04
SCALE
FULL SIZE
Series 400 - 102 (101.60) x 44mm frame
The glazing pocket has been designed to be compatible
with industry standard but more importantly :
• Pocket has been designed to allow the same door
midrails to be securely screw fixed both sides of
framing pocket.
This avoids screws at the back of the pocket that can
work loose and need to be countersunk to avoid
clashing with the adjoining sidelight fixings.
• Glazing wedges are fully recessed into the frame,
Santoprene or PVC wedges available.
• Accept true captive wedge glazing to reduce on site
time/costs. This pocket will also accept roll-in wedges
both sides.
10 Gauge stainless steel screws located close to the
outer edge keep the joint tight.
Pocketed filler also has screw splines. Two additional
screw fixings halve the chances of a joint opening up.
Alternative - Nailing fin frame
Knowing that centre glaze framing is used in cavity
brick and brick veneer construction. AWS offer
a couple of sections designed to make this
installation easier and more professional:
• Sill has built-in sump where water that gets
into the system will be collected. Drainage
slots in front face.
• Break-off nailing fin.
• Fin positioned to suit standard building-in lug.
• Front leg on sill and sub-sill has recess to accept
PVC sill flap.
We always recommend sub-sills under
commercial framing. The sub-sill shown
left has built-in nailing fin.
101.60mm frame depth
We have other sub-sills, refer installation section
110.
33.50
Australian registered design
112.2
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
DOOR DESIGN FEATURES
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 04
REPLACES
SCALE
FULL SIZE
Three Door Options
• Conventional single beaded rails that will
accept aluminium spigot (Series 50).
• Alternative screw together single beaded doors
(Series 51).
This screw together option will save time.
• Door rails, stiles, midrails and glazing beads have
the same recess as framing (to accept the
captive wedge).
• There are three midrails to choose from (50,
115 and 125mm deep). These midrails can be
securely fixed to doors and framing.
Important Note:
All three doors are 50mm wide. This allows the
production of over height doors up to 3000mm
which will comply with AS2047, see tables later.
• The third option (Series 52) is fully beaded inside and out.
• Three bead options for all door types 45°, 25° and 90°.
On the fully beaded (Series 52) door we can also offer beads to suit 34mm Insulating
Glass Units (IGU's).
25° Splayed beads
45° Splayed beads
Dry glazing with roll-in wedges both
sides.
90° Square beads
Dry glazing with custom captive glazing
wedge one side and a roll-in wedge on
the other. For security reasons the
captive wedge should be located on the
outside.
Wet glazing on the outside and a roll-in
wedge on the inside. There is a custom
captive spacer that is zipped into the
external frame recess.
Alternative Glazing
Methods
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.3
TYPICAL CONFIGURATIONS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 04
REPLACES
SCALE
NOT TO SCALE
Typical framing and door example:
Pair of hinged doors with fixed sidelights and highlights.
125mm midrails through doors and sidelights.
Both sill options.
Sub-sill.
Notes: Sub-sill can't be used with tall fixed sidelight
sill.
If you want to run sub-sill under hinged doors,
fit one of the door thresholds. Nursing home
threshold can't be used with sub-sill.
With a clear gap under the doors there is no
water resistance.
Pair of centre pivot doors with fixed sidelights and
highlights.
Awning sashes in sidelight.
50mm midrails through doors and sidelight.
No sub-sill.
Notes: Sub-sill can't be used with centre pivot doors.
When awnings are being fitted to highlights
consider fitting the concealed electric winder.
If you plan to fit flyscreen to awning sashes
use one of the winder options.
Manual winder.
Electric winder.
With a clear gap under the doors there is no
water resistance.
112.4
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
TYPICAL CONFIGURATIONS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 04
REPLACES
SCALE
NOT TO SCALE
Typical framing and sliding door example:
Sliding door with overhead rollers, fixed sidelight and
highlights.
115mm midrails through doors and sidelights.
Standard sill detail.
No sub-sill.
Notes: Overhead rollers give a clear sill detail. This
would be suitable for shop openings where no
floor obstruction is required.
With a clear gap under the doors there is no
water resistance.
Maximum door panel 3000mm high x 3000mm wide
subject to meeting stile strength, design wind load, panel
weight and allowable metal deflection.
Sliding door with bottom rollers, fixed sidelight and
highlights.
125mm midrails through doors and sidelights.
Notes: Bottom running sliding doors have a number
of sill fitting details:
Weather resistant sill.
Flat sill.
Maximum door panel 3000mm high x 3000mm wide
subject to meeting stile strength, design wind load, panel
weight and allowable metal deflection.
Sliding door with bottom roller gear, fixed sidelight
is another door panel.
Perimeter frame made up of channel frame only.
This system can be used to create a stacking door
system by ganging up the channel frames.
Notes: The recessed sill channel has been detailed
on the unit illustrated left.
The flat sill rail can also be used on a flat
floor without the channel frame, refer
page 61.
Maximum door panel 3000mm high x 3000mm
wide subject to meeting stile strength, design wind
load, panel weight and allowable metal deflection.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.5
FRAME OPTIONS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 04
REPLACES
SCALE
Australian Registered Design
FULL SIZE
Three standard frame strengths cover most
requirements. Medium strength open back and
sill illustrated left.
10 Gauge stainless steel spline screws.
All AWS frame and door sections have a true
captive glazing wedge option as illustrated left.
The system also suits:
Roll-in wedges both sides.
Silicone seal external with roll-in wedge on the
inside.
Wedges come in PVC or Santoprene.
Standard glazing pocket will accept glass
thickness up to 10.38mm
A snap-in adaptor will accept 24mm insulating
glass units.
Two glazing bead types:
Square bead, as shown left.
Splayed bead also available.
Glazing beads notched to allow water out of
the glazing pocket area.
Sill/transom can be closed off with custom
pocket closer when sub-sills are not being used.
Note:
Fitting sub-sill under sill will significantly improve
the weather performance.
Sump area in sill/transom to collect water, this
water is then drained out of the system via
drainage slots.
101.60mm frame depth
112.6
CAD file: DWG or DXF
AWS_400_FXD_1
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
FRAME OPTIONS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
A dedicated residential frame. Ideal for brick
veneer and cavity brick installations.
NOV 04
33.50
REPLACES
MAR 04
SCALE
FULL SIZE
Australian Registered Design
Main nailing fin frame features are:
• Can be fitted with timber reveals.
• Frame accepts height adjustable standard
building lug.
• Sill can be fitted with PVC flap to close off
sill to brick gap.
• Will accept internal frame closer to allow
additional line of reveal fixings and support
frame junction.
10# stainless steel spline screws.
All AWS frame and door sections have a true
captive glazing wedge option as illustrated right.
The system also suits:
Roll-in wedges both sides.
Silicone seal external with roll-in wedge on the
inside.
Wedges come in PVC or Santoprene.
Standard glazing pocket will accept glass
thickness up to 10.38mm
A snap-in adaptor will accept 24mm insulating
glass units.
Two glazing bead types:
Square bead, as shown left.
Splayed bead also available.
Glazing beads notched to allow water out of
the glazing pocket area.
Sump area in sill/transom to collect water, this
water is then drained out of the system via
drainage slots.
We offer an optional matching nailing fin subsill to complement the nailing fin frame.
We always recommend sub-sills under
commercial frames.
CAD file: DWG or DXF
AWS_400_FXD_1
101.60mm frame depth
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.7
OPTIONAL NARROW FRAME
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
JUN 06
REPLACES
NOV 04
SCALE
FULL SIZE & NTS
102mm x 25mm Narrow Frame
With snap-on nailing fin adaptor.
19mm Timber reveals.
33.25
Snap-on nailing fin frame will clip to any of the AWS
frames, suits timber reveal detail.
102mm x 30mm Nailing fin Frame
With integrated nailing fin.
19
CAD file: DWG or DXF
AWS_400_FXD_1
The 25mm frame can be used around the perimeter (jambs and
head). The 44mm sill as illustrated right is required to get the
removable glazing bead. At least one removable bead is required
per fixed opening to allow glazing/reglazing.
Mullion/s would also be 44mm wide.
112.8
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
MULLION OPTION - SNAP TOGETHER
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 04
REPLACES
SCALE
FULL SIZE & NTS
Australian Registered Design
Snap Mullions
The three open back frame sections can be used to create a snap
together mullion.
Medium version illustrated right.
Refer Pascal rating tables on later page for strength examples.
On long runs of shopfront framing where allowance for expansion is
required use one of the expansion mullions shown on following page.
The nailing fin frame can also be used as a snap mullion as shown
lower right.
CAD file: DWG or DXF
AWS_400_FXD_1
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.9
MULLION OPTION - INTERLOCKING
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 04
REPLACES
SCALE
FULL SIZE & NTS
Australian Registered Design
The two interlocking mullions shown on this page are ideal on longer
runs of framing where expansion will be encountered.
Light interlocking mullion illustrated left.
Mullions fitted with PVC seals.
Heavy interlocking mullion illustrated left.
Mullions fitted with PVC seals.
Refer Pascal rating tables shown on later page for the appropriate
mullion combination.
CAD file: DWG or DXF
AWS_400_FXD_1
112.10
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
CORNER MULLIONS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
JUN 06
REPLACES
MAR 04
SCALE
FULL SIZE
Australian Registered Design
'T' Mullion
Heavy duty 90° corner mullion can also
be used for 'T' intersections as shown
right.
The hollow corner mullion is
significantly stronger than the single
web mullion. Which is common in the
industry
This extra strength is critical to keeping
the snap-in fillers in place and allowing
the fitting of door panels.
CAD file: DWG or DXF
AWS_400_FXD_1
90° Mullion
Designed to carry the wind load and
resist un-snapping under severe
conditions.
Note:
Aluminium frame members are not
designed to carry the weight of the wall
/ roof over.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.11
MULLION STRENGTH
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
NOV 04
REPLACES
MAR 04
SCALE
y
HALF FULL SIZE
He ight
M ullion c e ntr e s m m
mm
81021
81011
1800
2000
x
x
2200
2400
81011 with 81021
Ixx = 789 x 103 mm4
Iyy = 97 x 103 mm4
y
2600
2800
3000
800
1000
1200
1400
1600
1800
2000
S
3333
2999
2632
2407
2283
2242
2242
U
5000
4499
3948
3611
3425
3364
3364
S
2824
2346
2049
1859
1732
1659
1635
U
4317
3567
3096
2791
2597
2488
2452
S
2098
1731
1498
1345
1243
1178
1141
U
3533
2902
2499
2231
2050
1932
1865
S
1602
1315
1131
1008
922
864
826
U
2947
2410
2064
1829
1666
1552
1477
S
1251
1023
876
776
705
655
620
U
2497
2035
1735
1530
1384
1279
1205
S
997
812
693
611
552
509
-
U
2143
1742
1481
1300
1170
1075
-
S
807
656
558
-
-
-
-
U
1860
1509
1279
-
-
-
-
Table 112.1 Wind Ratings (Pa) mullion 81011 and filler 81021.
y
He ight
M ullion c e ntr e s m m
81021
81012
mm
x
1800
x
2000
2200
2400
81012 with 81021
Ixx = 915 x 103 mm4
Iyy = 111 x 103 mm4
2600
2800
y
3000
800
1000
1200
1400
1600
1800
2000
S
3333
3333
3018
2760
2617
2570
2570
U
5000
5000
4526
4140
3926
3856
3856
S
3234
2686
2346
2128
1985
1901
1874
U
4949
4088
3549
3200
2978
2852
2811
S
2402
1982
1716
1540
1424
1349
1307
U
4050
3326
2865
2558
2350
2215
2137
S
1834
1506
1295
1154
1056
990
946
U
3378
2762
2366
2097
1910
1780
1693
S
1433
1172
1003
888
807
750
710
U
2862
2333
1989
1753
1586
1466
1381
S
1141
930
793
699
632
583
548
U
2457
1997
1697
1490
1341
1232
1152
S
924
751
639
561
505
-
-
U
2133
1730
1466
1283
1150
-
-
Table 112.2 Wind Ratings (Pa) mullion 81012 and filler 81021.
y
He ight
M ullion c e ntr e s m m
mm
81021
81013
1800
2000
x
x
2200
2400
81013 with 81021
Ixx = 1037 x 103 mm4
Iyy = 124 x 103 mm4
2600
2800
y
3000
800
1000
1200
1400
1600
1800
2000
S
3333
3333
3333
3127
2966
2913
2970
U
5000
5000
5000
4691
4448
4369
4455
S
3333
3044
2659
2412
2249
2155
2123
U
5000
4633
4022
3626
3374
3232
3185
S
2723
2246
1945
1746
1614
1529
1481
U
4589
3769
3247
2898
2663
2510
2422
S
2079
1707
1468
1308
1197
1122
1072
U
3828
3130
2681
2376
2164
2016
1919
S
1624
1328
1137
1007
915
850
804
U
3243
2643
2254
1987
1797
1661
1565
S
1294
1054
899
793
716
661
621
U
2784
2263
1923
1688
1520
1396
1305
S
1047
852
724
636
572
525
-
U
2417
1960
1661
1454
1303
1192
-
Table 112.3 Wind Ratings (Pa) mullion 81013 and filler 81021.
112.12
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
MULLION STRENGTH
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
NOV 04
REPLACES
MAR 04
SCALE
HALF FULL SIZE
S = Serviceability limit state (deflection = L/250).
U = Ultimate strength limit state (factored yield strength = 104 MPa).
These tables have been calculated using nominal section properties.
A typical assembly has been tested as per the requirements of AS2047,
Serviceability rating has been limited to 3333 Pa and
Ultimate strength rating has been limited to 5000 Pa.
He ight
M ullion c e ntr e s m m
mm
1800
2000
y
2200
81025
81025
2400
2600
x
x
2800
3000
800
1000
1200
1400
1600
1800
2000
S
3333
3333
3104
2839
2692
2644
2696
U
5000
5000
4656
4259
4039
3967
4044
S
3333
2804
2434
2194
2042
1956
1928
U
5000
4206
3651
3292
3063
2934
2892
S
2628
2168
1877
1685
1558
1476
1430
U
4167
3422
2948
2631
2418
2279
2199
S
2007
1647
1417
1262
1156
1083
1035
U
3476
2842
2434
2157
1964
1831
1742
S
1568
1282
1098
972
883
820
777
U
2945
2400
2046
1804
1632
1508
1421
S
1249
1018
868
765
691
638
599
U
2528
2054
1746
1533
1380
1267
1185
S
1011
822
699
614
552
507
-
U
2194
1779
1508
1320
1183
1082
-
Table 112.4 Wind Ratings (Pa) self mating mullion 81025.
y
He ight
81025 with 81025
Ixx = 1001 x 103 mm4
Iyy = 78 x 103 mm4
2200
2400
y
2600
2800
3000
3200
x
x
3400
81026
81026
3600
y
81026 with 81026
Ixx = 1836 x 103 mm4
Iyy = 198 x 103 mm4
M ullion c e ntr e s m m
mm
3800
4000
800
1000
1200
1400
1600
1800
2000
S
3333
3333
3333
3091
2857
2707
2623
U
5000
5000
5000
4830
4439
4183
4037
S
3333
3021
2599
2315
2120
1986
1898
U
5000
5000
4468
3960
3606
3361
3198
S
2876
2351
2013
1782
1620
1505
1424
U
5000
4405
3757
3312
2996
2769
2609
S
2290
1867
1592
1403
1268
1170
1099
U
4640
3772
3206
2814
2533
2327
2176
S
1854
1508
1282
1125
1013
930
868
U
4028
3267
2769
2423
2172
1986
1846
S
1522
1235
1048
917
822
752
699
U
3530
2858
2417
2109
1885
1717
1589
S
1266
1025
868
758
678
617
571
U
3119
2522
2129
1854
1653
1501
1384
S
1064
860
727
634
565
513
-
U
2776
2242
1891
1643
1462
1324
-
S
902
729
615
535
-
-
-
U
2488
2007
1690
1467
-
-
-
S
772
624
525
-
-
-
-
U
2242
1807
1520
-
-
-
-
Table 112.5 Wind Ratings (Pa) self mating mullion 81026.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.13
DOOR OPTION - SERIES 50
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 04
REPLACES
SCALE
FULL SIZE & NTS
Series 50 Door
Top rail
•
50mm thick doors are significantly stronger than the usual 44mm thick doors.
Basically 50mm thick doors are ideal for larger than standard doors. Refer Pascal
rating table shown on later page.
•
Series 50 doors have removable snap-on glazing beads on horizontal rails and
wrap around vertical stiles as shown on these pages.
•
Stile to rail joint is securely fixed with custom heavy duty spigot/tapping plate
assembly as shown below.
•
Door glass can be blocked with patented custom stile glazing block and adjustable
setting block.
•
Series 50 door will accept glass up to 10.38mm thick.
•
Horizontal rails can be fitted with square or splayed glazing beads as shown on
following page.
•
19mm High glazing beads ensure that the glass gets the right bite.
•
Can be security glazed with captive external glazing wedge.
•
Four midrail options 50mm , 115mm, 125mm and 200mm deep.
•
Lock stile wide enough to accept most lock types.
•
Rebated French meeting stiles and wide stiles.
Maximum Recommended Series 50 Door Panel Sizes
Hinge quantity
3. hinges - height less than or equal to 2200mm
4. hinges - height greater than to 2200mm.
Maximum weight
with 3. hinges
with 4. hinges
30 kg
50 kg
Maximum panel width
Maximum panel height
1000mm
3000mm (subject to wind load)
Bottom rail
this 115mm rail could
also be used as top rail
when surface mounted
closers are being used.
10# Pan head stainless steel self tapping
screws.
M6 Stainless steel cap screws and locking
star washers.
Heavy duty extruded aluminium joinery
spigot and tapping plate.
Door stile cut away to show the tapping plate.
112.14
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
DOOR OPTION - SERIES 50
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 04
REPLACES
SCALE
FULL SIZE & NTS
CAD file: DWG or DXF
AWS_400_50_2
Drawing number.
Door series.
Framing series.
Hinge stile
Standard 90° square glazing
bead shown below.
Meeting wiper/pivot
stile
Rails tuck into stiles to give
a clean seamless joint.
Alternative 45° splayed glazing bead.
Meeting wiper/pivot
stile
Alternative 25° splayed glazing bead.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.15
DOOR OPTION - SERIES 51
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 04
REPLACES
SCALE
FULL SIZE & NTS
Series 51 Door
Top rail
•
Another 50mm thick door design.
•
Series 51 doors have removable snap-on glazing beads on horizontal rails and
wrap around vertical stiles as shown on these pages.
•
Stiles are screwed to rails as shown on this page using 10# Pan head stainless
steel self tapping spline screws and custom aluminium backing plate as shown
below.
•
Door glass can be blocked with patented custom stile glazing block and adjustable
setting block as shown later in these notes.
•
Series 51 door will accept glass up to 10.38mm thick.
•
Horizontal rails can be fitted with square or splayed glazing beads as shown on
following page.
•
19mm High glazing beads ensure that the glass gets the right bite.
•
Can be security glazed with captive external glazing wedge.
•
Four midrail options 50mm , 115mm, 125mm and 200mm deep.
•
Lock stile wide enough to accept most lock types.
•
Rebated French meeting stiles and wide stiles.
Maximum Recommended Series 51 Door Panel Sizes
Hinge quantity
3. hinges - height less than or equal to 2200mm
4. hinges - height greater than to 2200mm.
Maximum weight
with 3. hinges
with 4. hinges
30 kg
50 kg
Maximum panel width
Maximum panel height
900mm
2400mm (subject to wind load)
Bottom rail
this 115mm rail could
also be used as top rail
when surface mounted
closers are being used.
Nylon access hole caps (black or white).
10# Pan head stainless steel self tapping
screws. Door rails have screw splines to
accept these screws.
Heavy duty extruded aluminium backing
plate.
Door stile cut away to show the backing plate.
112.16
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
DOOR OPTION - SERIES 51
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 04
REPLACES
SCALE
FULL SIZE & NTS
CAD file: DWG or DXF
AWS_400_51_2
Drawing number.
Door series.
Framing series.
Hinge stile
Standard 90° square glazing
bead shown below.
Meeting wiper/pivot
stile
Rails tuck into stiles to give
a clean seamless joint.
Alternative 45° splayed glazing bead.
Meeting wiper/pivot
stile
Alternative 25° splayed glazing bead.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.17
DOOR OPTION - SERIES 52
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
NOV 04
REPLACES
MAR 04
SCALE
FULL SIZE & NTS
Series 52 Door
Top rail
•
Another 50mm thick door, but now fully beaded.
•
Series 52 doors have removable snap-on glazing beads on horizontal rails and
verticals stiles (both sides) as shown on these pages.
•
Stile to rail joint is securely fixed with custom spigot assembly as shown below.
•
Door glass can be blocked and fitted with adjustable setting block.
•
Series 52 door will accept glass up to 24mm thick.
•
Horizontal rails can be fitted with square or splayed glazing beads as shown on
following page.
•
19mm high glazing beads ensure that the glass gets the right bite.
•
Can be security glazed with captive external glazing wedge.
•
Four midrail options 50mm and 115mm deep (suit glass up to 10.38mm thick)
and a 125mm and 200mm midrails that accepts glass up to 34mm thick.
•
Lock stile wide enough to accept most lock types.
•
Rebated French meeting stiles and wide stiles.
Maximum Recommended Series 52 Door Panel Sizes
Hinge quantity
3. hinges - height less than or equal to 2200mm
4. hinges - height greater than to 2200mm.
Maximum weight
with 3. hinges
with 4. hinges
30 kg
50 kg
Maximum panel width
Maximum panel height
1000mm
3000mm (subject to wind load)
Bottom rail
this 115mm rail could
also be used as top rail
when surface mounted
closers are being used.
Heavy duty extruded aluminium joinery
spigot and tapping plate.
Door stile cut away to show the tapping plate.
M6 Stainless steel cap screws and locking
star washers.
10# Pan head stainless steel self tapping
screws.
112.18
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
DOOR OPTION - SERIES 52
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 04
REPLACES
SCALE
FULL SIZE & NTS
CAD file: DWG or DXF
AWS_400_52_2
Drawing number.
Door series.
Framing series.
Hinge stile
Standard 45° splayed glazing beads on the
horizontals and 90° square beads on the
verticals.
Alternatively we can fit 45° splayed beads
on verticals and horizontals as shown on
this isometric view.
We can also offer 25° splayed beads on the
horizontals and 90° square beads on the
verticals.
Another option is 90° square beads all
round.
Meeting wiper/pivot
stile
Rails tuck into stiles to give
a clean seamless joint.
Alternative 25° splayed glazing bead on
horizontals with 90° square beads vertically.
Meeting wiper/pivot
stile
Alternative 90° square glazing bead on all
sides.
Other glazing bead options are shown on
the following page.
Double glazed Series 52 door shown later
in there notes.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.19
SERIES 52 BEAD OPTIONS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
NOV 04
REPLACES
MAR 04
SCALE
FULL SIZE
Series 52 doors and the double glazed fixed adaptor have numerous glazing bead options as shown below:
14.50
25° splayed
45° splayed
Standard glazing rebate matches shopfront framing. Suitable for glass up to 10.38mm thick.
The 25° splayed bead matches splay in Series 406 and 606 FrontGLAZE™ framing.
20.50
25° splayed
45° splayed
These beads are from Series 406 FrontGLAZE™ framing. They will snap into Series 52 doors to
give a 6mm wider glazing pocket.
33
40
Pressure bead to suit 24mm thick IGU's.
Pressure bead to suit 34mm thick IGU's.
CAD file: DWG or DXF
AWS_400_52_2
112.20
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
DOOR STRENGTH
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
NOV 04
REPLACES
MAR 04
SCALE
HALF FULL SIZE
Panel
Width
Don't ignore the strength of the door meeting stiles.
Panel Height
S = Serviceability limit state (deflection = L/250).
U = Ultimate strength limit state (factored yield strength = 104 MPa).
These tables have been calculated using nominal section properties.
Serviceability rating has been limited to 3333 Pa and
Ultimate strength rating has been limited to 5000 Pa.
Pivot/wiper meeting stiles
(Series 50/51 illustrated
Rebated French meeting stiles
(Series 50/51 illustrated
P ivot Door M e e ting S tile S tre ngth G uide
Pa ne l
Pa ne l
Ra tings - Pivot m e e ting s tile s
He ight
W idth
mm
mm
S
U
S
U
S
U
S
U
2100
700
1395
4492
1070
3431
1741
5000
1416
4310
2100
800
1238
3978
950
3038
1545
4764
1256
3816
2100
900
1118
3584
858
2737
1395
4293
1135
3439
2100
1000
1025
3276
786
2502
1278
3923
1040
3143
2400
700
925
3409
710
2603
1154
4083
939
3270
2400
800
818
3009
627
2298
1020
3604
830
2887
2400
900
736
2703
565
2064
918
3237
747
2593
2400
1000
671
2461
515
1879
838
2947
681
2361
2600
700
724
2892
555
2209
903
3464
734
2775
2600
800
639
2550
-
-
797
3054
648
2446
2600
900
574
2286
-
-
716
2738
582
2193
2600
1000
523
2078
-
-
652
2489
530
1994
2800
700
577
2485
-
-
720
2976
586
2384
2800
800
509
2189
-
-
635
2621
516
2100
2800
900
-
-
-
-
569
2348
-
-
2800
1000
-
-
-
-
518
2131
-
-
3000
700
-
-
-
-
583
2586
-
-
3000
800
-
-
-
-
514
2275
-
-
3000
900
-
-
-
-
-
-
-
-
3000
1000
-
-
-
-
-
-
-
-
Se rie s 5 0 & 5 1
Ra tings - Re ba te d Fre nc h m e e ting s tile s
Se rie s 5 2
Se rie s 5 0 & 5 1
Se rie s 5 2
Table 112.6 Wind Ratings (Pa) door meeting stiles.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.21
ALTERNATIVE DOOR STILES - FRENCH REBATE
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
JUN 06
REPLACES
MAR 04
Australian Registered Design
SCALE
FULL SIZE & NTS
Rebated French Meeting Stiles - Series 50 and Series 51
These rebated stiles can be used for internal opening or externally opening doors.
The lock stile has been designed to accept ANDO™ lever lock and the keeper stile
has been designed to accept ANDO™ twinbolt hardware as shown below and on
the lock hardware pages later in these notes.
Lock stile will also accept Lockwood 3580 and Legge 995MF locks with AWS custom
nylon lock keeper. The keeper stile would be fitted with finger operated flush bolts
when using these types of locks.
Co-extruded Santoprene stile seals.
CAD file: DWG or DXF
AWS_400_50_3
French keeper
stile
Throw bolts on lever lock,
twinbolt and flushbolts are
secured with custom extruded
aluminium bolt guides.
French lock
stile
The ANDO™ lever lock shown highlights the multi
point option where besides the central lock bolts
are thrown into head and sill.
Note:
ANDO™ lever lock sets and twinbolts are
designed for residential applications.
For high traffic applications use Lockwood 3580
or Legge 995MF locks and finger operated flush
bolts, shown later in these notes.
112.22
AWS custom glass filled
nylon keeper nests into
the keeper stile.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
ALTERNATIVE DOOR STILES - WIDE
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 04
REPLACES
SCALE
FULL SIZE
Medium frame illustrated.
Weatherpile door seal.
The gap between door and frame
varies depending on the hinge type
used:
2mm Recessed alum. butt hinges
4mm Aluminium fast fix hinges
3mm Stainless steel fast fix hinges
Wide meeting
wiper/pivot stile
Wide hinge stile
The extruded aluminium door stop
shown above suits the standard
50mm thick doors.
We also offer a 40mm door stop
to suit timber doors as shown
below.
CAD file: DWG or DXF
AWS_400_50_3
On centre pivot doors use one of the pivot/wiper stiles and fit
glazing pocket closer as shown below, alternatively you could use
the plain jamb if there were no fixed highlights.
Wide meeting
wiper/pivot stile
This wide stile will
accept Lockwood
3572 type locks as
shown later in the
lock detail pages.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.23
ALTERNATIVE DOOR STILES - FRENCH REBATE
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
JUN 06
REPLACES
MAR 04
Australian Registered Design
SCALE
FULL SIZE & NTS
Rebated French Meeting Stiles - Series 52
These rebated stiles can be used for internal opening or externally opening doors.
The lock stile has been designed to accept ANDO™ lever lock and the keeper stile
has been designed to accept ANDO™ twinbolt hardware as shown below and on
the lock hardware pages later in these notes.
Lock stile will also accept Lockwood 3580 and Legge 995MF locks with AWS custom
nylon lock keeper. The keeper stile would be fitted with finger operated flush bolts
when using these types of locks.
Co-extruded Santoprene stile seals.
CAD file: DWG or DXF
AWS_400_52_3
French keeper
stile
Throw bolts on lever lock,
twinbolt and flushbolts are
secured with custom extruded
aluminium bolt guides.
French lock
stile
The ANDO™ lever lock shown highlights the multi
point option where besides the central lock bolts
are thrown into head and sill.
Note:
ANDO™ lever lock sets and twinbolts are
designed for residential applications.
For high traffic applications use Lockwood 3580
or Legge 995MF locks and finger operated flush
bolts, shown later in these notes.
112.24
AWS custom glass filled
nylon keeper nests into
the keeper stile.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
ALTERNATIVE DOOR STILES - WIDE
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 04
REPLACES
SCALE
FULL SIZE
Medium frame illustrated.
Weatherpile door seal.
The gap between door and frame
varies depending on the hinge type
used:
2mm Recessed alum. butt hinges
4mm Aluminium fast fix hinges
3mm Stainless steel fast fix hinges
Wide meeting
wiper/pivot stile
Wide hinge stile
The extruded aluminium door stop
shown above suits the standard
50mm thick doors.
We also offer a 40mm door stop
to suit timber doors as shown
below.
CAD file: DWG or DXF
AWS_400_52_3
Wide meeting
wiper/pivot stile
This wide stile will
accept Lockwood
3572 type locks as
shown later in the
lock detail pages.
On centre pivot doors use one of the pivot/wiper stiles and fit
glazing pocket closer as shown below, alternatively you could use
the plain jamb if there were no fixed highlights.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.25
LIGHT SILL / TRANSOM
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 04
REPLACES
SCALE
FULL SIZE & NTS
Stainless steel self tapping frame assembly screws.
Security glazing option illustrated.
Glazing pocket drained out of the glazing area
into sill/transom sump then out of the system via
drainage holes.
Split transom
Pocketed filler has screw splines to allow
transoms to be secured to mullions/jambs with
four 10# screws - tight joint.
Square glazing bead illustrated.
Open back light sill/transom illustrated.
Medium sill/transom similar with a heavier wall
thickness.
CAD file: DWG or DXF
AWS_400_FXD_1
Sill
Weather Performance:
Fitting sub-sills under frames will significantly
improve water resistance.
Details on sub-sill shown later in these notes.
Standard glazing pocket will accept glass up to 10.38mm thick.
Recessed glazing wedges give a significantly smarter finish to
the framing. These recessed wedges are carried through to
doors as illustrated earlier in these notes.
Glazing can be:
• Security glazed as illustrated right, captive wedge external,
roll-in wedge internal.
• Roll-in wedges both sides.
• Silicone seal external and roll-in wedge internal.
Wedges come in PVC or Santoprene.
Standard square glazing bead shown on full size detail above.
Alternative splayed bead shown on following page and the
isometric detail right.
Drainage holes allow water out of the glazing pocket area.
112.26
Australian Registered Design
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
HEAVY DUTY TUBULAR SILL / TRANSOM
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 04
REPLACES
SCALE
FULL SIZE & NTS
Alternative splayed glazing bead illustrated.
Stainless steel self tapping frame assembly screws.
Security glazing option illustrated.
Glazing pocket drained out of the glazing area
into sill/transom sump then out of the system via
drainage holes.
Four screw splines ensure that the transom to
mullions/jambs joints are tight.
Tubular transom
Double tubular heavy duty sill/transom illustrated.
Drip groove guides water off the lowlight glass.
CAD file: DWG or DXF
AWS_400_FXD_1
Sill
Weather Performance:
Fitting sub-sills under frames will significantly
improve water resistance.
Details on sub-sill shown later in these notes.
The double tubular transom is significantly
stronger when carrying the glass dead load,
refer dead load graph on later page.
The heavy duty jamb option is shown on
the isometric illustration left.
The splayed alternative glazing bead
illustrated guides water and dust off the
frame. Ideal for seaside areas where frames
will be subjected to salt build-up. If you
don't remove salt build-ups from the frame
the paint/anodising finish will be damaged.
Drainage holes allow water out of the
glazing pocket area.
Australian Registered Design
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.27
NAILING FIN SILL / TRANSOM
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
JUN 06
REPLACES
NOV 04
SCALE
FULL SIZE & NTS
This framing version is designed for residential
applications. Nailing fin, will accept building-in lug.
Timber reveals can be fitted to frame and captive
PVC sill flap closes off sill to brick gap.
Glazing pocket drained out of the glazing area
into sill/transom sump then out of the system via
drainage holes.
Transom
Pocketed filler has screw splines to allow transoms
to be secured to mullions/jambs with four 10#
screws - tight joint.
CAD file: DWG or DXF
AWS_400_FXD_1
Sill
We offer two open back frames with integrated
nailing fin:
• 30mm illustrated above.
• 44mm
4
33.50
Important Note:
Overall frame height includes the nailing
fin sub-sill and is measured to the
external lower edge, refer '4'.
Nailing fin perimeter frame designed for
brick veneer and cavity brick wall
installation.
Australian Registered Design
112.28
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
TRANSOM STRENGTH
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
NOV 04
REPLACES
MAR 04
SCALE
HALF FULL SIZE
S = Serviceability limit state (deflection = L/250).
U = Ultimate strength limit state (factored yield strength = 104 MPa).
These tables have been calculated using nominal section properties.
A typical assembly has been tested as per the requirements of AS2047,
Serviceability rating has been limited to 3333 Pa and
Ultimate strength rating has been limited to 5000 Pa.
Height
1000mm
x
He ight
M ullion c e ntr e s m m
mm
1800
81045
81015
y
y
2000
2200
81021
2400
81015 with 81021
Ixx = 696 x 103 mm4
Iyy = 80 x 103 mm4
2600
x
1800
2000
2200
2400
2600
2800
S
2623
2087
1652
1258
981
780
3000
630
U
3935
3131
2554
2125
1797
1541
1336
S
2404
1906
1508
1145
891
708
572
U
3606
2859
2326
1932
1631
1396
1210
S
2248
1771
1399
1059
822
652
525
U
3371
2657
2153
1782
1501
1283
1110
S
2141
1673
1319
994
769
607
-
U
3212
2510
2022
1667
1400
1193
-
S
2078
1606
1260
944
727
573
-
U
3117
2409
1926
1579
1320
1122
-
Table 112.7 Wind Ratings (Pa) transom 81015 and filler 81021.
x
He ight
M ullion c e ntr e s m m
mm
81045
1800
81016
y
y
81021
81016 with 81021
Ixx = 734 x 103 mm4
Iyy = 85 x 103 mm4
2000
2200
2400
x
2600
1800
2000
2200
2400
2600
2800
S
2744
2183
1742
1327
1034
822
665
U
4115
3275
2671
2223
1880
1611
1397
S
2515
1993
1590
1208
940
746
603
U
3772
2990
2433
2020
1706
1460
1265
S
2351
1853
1476
1117
867
687
554
U
3526
2779
2251
1864
1570
1342
1161
S
2239
1750
1391
1048
811
640
515
U
3359
2625
2115
1744
1464
1248
1077
S
2174
1680
1329
996
767
604
-
U
3260
2520
2014
1651
1381
1173
-
Table 112.8 Wind Ratings (Pa) transom 81016 and filler 81021.
x
He ight
M ullion c e ntr e s m m
mm
81045
81017
1800
y
y
2000
2200
81017
Ixx = 659 x 103 mm4
Iyy = 129 x 103 mm4
x
3000
2400
2600
1800
2000
2200
2400
2600
2800
S
2557
2034
1564
1191
929
738
3000
597
U
3835
3052
2490
2072
1752
1502
1302
S
2343
1858
1427
1084
844
670
541
U
3515
2786
2267
1883
1590
1361
1179
S
2191
1726
1325
1003
779
617
-
U
3286
2590
2098
1737
1463
1251
-
S
2087
1631
1249
941
728
575
-
U
3130
2447
1971
1625
1364
1163
-
S
2026
1566
1193
894
689
542
-
U
3038
2348
1877
1539
1287
1094
-
Table 112.9 Wind Ratings (Pa) transom 81017.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.29
HINGED DOOR HEAD
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
NOV 04
REPLACES
MAR 04
SCALE
FULL SIZE & NTS
Australian Registered Design
Extruded aluminium door stops clips into any of the AWS
pocketed frame sections (medium 102 x 44mm frame
illustrated).
Weatherpile or co-extruded Santoprene stop seal.
On hinged doors fitted with surface mounted closers we
recommend using 115mm bottom rail as top rail as illustrated
right. The standard 85mm top rail is shown on full size detail
below. Full size detail of 115mm bottom rail shown on later
page.
Doors can be glazed with captive security wedge (same as
framing). Other wedge options are roll-in both sides or
Silicone on the outside and roll-in wedge on the inside.
Three door systems are available, shown earlier in these
notes. Series 50 door panel sections illustrated.
Optional head backing plate for surface mounted door closers
in high traffic areas.
Head
CAD file: DWG or DXF
AWS_400_50_2
Drawing number.
Door series.
Framing series.
The extruded aluminium door stop shown above
suits the standard 50mm thick doors.
Top rail
Standard 90° square glazing bead
illustrated (Series 50).
A 40mm door stop to suit timber doors is shown
below.
Alternative 25° and 45° splayed
beads are available, refer
illustrations earlier in these
notes.
112.30
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
HINGED DOOR TRANSOM
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
Australian Registered Design
Standard square glazing bead illustrated, splayed
bead also available.
Drain glazing pocket:
Drainage slots in glazing bead leg.
Sump in transom to collect water.
Drainage holes in transom to get water out of
the system.
Transom/mullion pocket holes sealed off with
custom pocket closing block.
NOV 04
REPLACES
MAR 04
SCALE
FULL SIZE & NTS
Optional transom backing plate
for surface mounted door
closers in high traffic areas.
Split transom
Transom detail has four fixing screws per end
to ensure this joint stays tight.
On this detail the door stop has been clipped
to the pocketed filler.
Weatherpile or co-extruded Santoprene stop
seal.
Top rail
On hinged doors fitted with surface mounted closers we
recommend using 115mm bottom rail as top rail as illustrated
left.
The standard 85mm top rail is shown on full size detail above.
Full size detail of 115mm bottom rail shown on later page.
CAD file: DWG or DXF
AWS_400_50_3
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.31
CONCEALED OVERHEAD CLOSER TRANSOM
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 04
REPLACES
SCALE
FULL SIZE & NTS
Removable snap-in COC cover plate.
Three door systems are available, shown
earlier in these notes.
Series 50 door panel sections illustrated.
COC Transom 81035
Top rail
Doors can be glazed with captive security wedge (same as
framing). Other wedge options are roll-in both sides or
Silicone on the outside and roll-in wedge on the inside.
CAD file: DWG or DXF
AWS_400_50_4
Australian Registered Design
112.32
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
COC TRANSOM SIDELIGHT
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 04
REPLACES
SCALE
FULL SIZE
Glazing beads clip directly to the COC
transom as illustrated right. Besides the
standard 90° square beads we can also offer
25° or 45° splayed beads.
COC transom screwed to jambs/mullions.This
keeps the joint tight.
On door frames where the centre pivot doors
with sidelights have one fixed highlight as
shown below.
COC Fixed transom
The COC transom has to run through.
A special pocketed COC filler for fixed
sidelights is available.
This design wind load table have been produced as a guide to assist in checking
the COC transom strength.
S = Serviceability limit state (deflection = L/250).
U = Ultimate strength limit state (factored yield strength = 104 MPa).
These tables have been calculated using nominal section properties.
A typical assembly has been tested as per the requirements of AS2047,
Serviceability rating has been limited to 3333 Pa and
Ultimate strength rating has been limited to 5000 Pa.
Overall Frame Width mm
Transom Overlight
mm
CAD file: DWG or DXF
AWS_400_50_4
2100
2100
Drawing number.
Door series.
Framing series.
2400
2400
mm
600
800
600
800
1800
2000
2200
2400
2600
S
2569
1931
1405
1028
777
2800
604
U
3853
2897
2240
1791
1470
1232
S
2345
1769
1291
947
717
558
U
3517
2654
2059
1650
1358
1139
S
2569
1931
1402
1014
755
580
U
3853
2897
2235
1761
1423
1178
S
2345
1769
1288
934
698
537
U
3517
2654
2055
1625
1317
1093
Table 112.10 Wind Ratings (Pa) transom 81035.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.33
CONCEALED OVERHEAD CLOSER HEAD
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 04
REPLACES
SCALE
FULL SIZE & NTS
The COC transom extrusion is also used
as head member on centre pivot doors
without highlights.
COC Head
Removable snap-in COC cover plate.
Series 50 top rail illustrated
CAD file: DWG or DXF
AWS_400_50_4
Top rail
112.34
Drawing number.
Door series.
Framing series.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
DEEP FRAME TO MATCH COC HEAD
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 04
REPLACES
SCALE
FULL SIZE & NTS
Tall (50mm) fixed head can be used to align
with COC head on previous page.
This wider open back frame section can
also be used as jambs and snap together
mullion if required.
CAD file: DWG or DXF
AWS_400_50_4
Drawing number.
Door series.
Framing series.
With the optional 50mm fixed head the
sightline aligns with adjoining pivot door as
illustrated left.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.35
CONCEALED OVERHEAD CLOSER THRESHOLD - 85
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 04
SCALE
FULL SIZE & NTS
Illustration left shows Series 52 door bottom rail double
glazed - Isometric below shows Series 50 single glazed.
CAD file: DWG or DXF
AWS_400_50_4
Threshold screwed to jambs/mullions with 10# Pan head
stainless steel self tapping screws.
Double ramp threshold not suitable for sub-sill applications.
20mm
Gap
We can fit a weather strip to
the bottom rail as shown left,
to reduce air infiltration.
112.36
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
CONCEALED OVERHEAD CLOSER THRESHOLD - 84
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 04
SCALE
FULL SIZE & NTS
Illustration left shows Series 52 door bottom rail
double glazed - Isometric below shows Series 50
single glazed.
Threshold screwed to jambs/mullions with 10# Pan
head stainless steel self tapping screws.
Singble ramp threshold can be fitted into sub-sill
as shown.
Fit PVC/Santoprene roll-in
wedge between sub-sill and
threshold.
Sub-sills will significantly
improve water resistance.
28mm
Gap
Seal sub-sill to structure at this
point.
The second screw port of front of
thresholds allows them to be used on
FrontGLAZE™ framing systems.
CAD file: DWG or DXF
AWS_400_50_4
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.37
50 and 115mm MIDRAILS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
NOV 04
SCALE
FULL SIZE
S = Serviceability limit state (deflection = L/250).
U = Ultimate strength limit state (factored yield strength = 104 MPa).
These tables have been calculated using nominal section properties.
Serviceability rating has been limited to 3333 Pa and
Ultimate strength rating has been limited to 5000 Pa.
Height
Mullion centres mm
mm
1800
2000
2200
2400
2600
50mm Midrail
1200
1400
1600
1800
2000
2200
2400
S
2217
1303
836
570
-
-
-
U
4013
2771
2041
1572
-
-
-
S
2101
1217
773
524
-
-
-
U
3785
2575
1881
1441
-
-
-
S
2064
1168
732
-
-
-
-
U
3709
2462
1774
-
-
-
-
S
2064
1153
709
-
-
-
-
U
3794
2424
1711
-
-
-
-
S
2064
1153
701
-
-
-
-
U
4096
2466
1690
-
-
-
-
Table 112.11 Wind Ratings (Pa) midrail 81572.
CAD file: DWG or DXF
AWS_400_50_4
The 115mm Midrail is secured to door stiles, jambs and mullions with
dedicated spigots.
Height
Mullion centres mm
mm
1800
2000
2200
2400
2600
1200
1400
1600
1800
2000
2200
S
3333
3069
1969
1343
959
710
2400
540
U
5000
5000
4772
3676
2925
2386
1986
S
3333
2864
1821
1234
878
648
-
U
5000
5000
4398
3369
2671
2173
-
S
3333
2750
1724
1158
818
601
-
U
5000
5000
4147
3149
2482
2011
-
S
3333
2714
1669
1108
776
566
-
U
5000
5000
4000
3000
2345
1889
-
S
3333
2714
1651
1079
748
541
-
U
5000
5000
3951
2912
2251
1799
-
Table 112.12 Wind Ratings (Pa) midrail 81502 or 81504 or 81542
with filler 81574.
115mm Midrail
112.38
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
125mm MIDRAILS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
Height
2000
2200
2400
2600
REPLACES
NOV 04
SCALE
FULL SIZE & NTS
Mullion centres mm
mm
1800
MAR 08
1200
1400
1600
1800
2000
2200
2400
S
3333
2720
1745
1190
850
629
-
U
5000
5000
4040
3112
2476
2020
-
S
3333
2539
1614
1094
778
574
-
U
5000
5000
3723
2852
2261
1840
-
S
3333
2438
1528
1027
725
533
-
U
5000
4873
3511
2666
2101
1703
-
S
3333
2405
1479
982
688
502
-
U
5000
4798
3387
2540
1985
1599
-
S
3333
2405
1464
956
663
-
-
U
5000
4881
3345
2466
1906
-
-
Table 112.13 Wind Ratings (Pa) midrail 81571.
Series 50 and 51
125mm Midrail
CAD file: DWG or DXF
AWS_400_50_4
50mm and 125mm Midrails have screw splines to allow them to be screwed
to jambs/mullions.
Series 52
125mm Midrail
CAD file: DWG or DXF
AWS_400_52_4
The special AWS glazing pocket has been designed to suit this midrail to
frame fixing method, as illustrated above.
Doors have a dedicated spigot to allow secret fixings.
Height
Mullion centres mm
mm
1800
2000
2200
2400
2600
1200
1400
1600
1800
2000
2200
2400
S
3333
2350
1508
1029
735
544
-
U
5000
5000
3869
2980
2371
1934
-
S
3333
2194
1394
945
672
-
-
U
5000
4880
3565
2731
2165
-
-
S
3333
2106
1320
887
627
-
-
U
5000
4666
3362
2553
2012
-
-
S
3333
2078
1278
848
594
-
-
U
5000
4594
3243
2432
1901
-
-
S
3333
2078
1265
826
573
-
-
U
5000
4674
3203
2361
1825
-
-
Table 112.14 Wind Ratings (Pa) midrail 81584.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.39
HINGED DOOR JAMBS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
NOV 04
SCALE
FULL SIZE
Internal opening hinged door
Hinge stile
Series 50/51 door stile illustrated
Weatherpile or co-extruded Santoprene stop seal.
Jamb
Standard extruded aluminium door stop to suit 50mm
thick doors.
Snap-in door stop to suit 40mm thick timber doors
also available.
External opening hinged door
Alternative Frames:
The door stops can also be snapped into any of the
CentreGLAZE™ interlocking mullions, narrow frame or
corner mullion.
The hinges should always be fixed to the main frame
member, not the snap-in pocketed filler.
Jamb
For high traffic areas we offer a concealed hinge backing
plate as shown shaded. If you feel you need this option
clearly specify when ordering.
Hinge stile
112.40
CAD file: DWG or DXF
AWS_400_50_2
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
PIVOT DOOR JAMBS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 04
SCALE
FULL SIZE & NTS
Centre pivot doors with highlights
require a pocketed frame similar
to the frame shown right.
Series 50/51 door stile illustrated
Doors can be security glazed as
shown.With captive glazing wedge
on the outside.
For double glazing in doors use
Series 52 door, refer page 48.
Pivot stile
All centre pivot doors are fitted
with weatherpile fringe seal.
Jamb
Centre pivot doors without
highlights can use the plain frame
as shown right.
Series 50/51 door stile illustrated
Pivot stile
CAD file: DWG or DXF
AWS_400_50_4
Jamb
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.41
EXTERNAL OPENING DOOR THRESHOLD - 75
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 04
SCALE
FULL SIZE & NTS
Series 50 door bottom rail illustrated.
CAD file: DWG or DXF
AWS_400_50_3
Weatherpile threshold seal.
External opening hinged door threshold 40mm high.
Bottom rail
Threshold screwed to jambs/mullions with 10# Pan head
stainless steel self tapping screws.
Fit PVC/Santoprene roll-in
wedge between sub-sill and
threshold.
Sub-sills will significantly improve
water resistance.
22mm
Gap
Drainage slots
Seal sub-sill to structure at this
point.
112.42
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
INTERNAL OPENING DOOR THRESHOLD - 68
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Series 50 door bottom rail illustrated.
Internal Opening Hinged
Door Threshold
Internal opening hinged door
threshold 24mm high.
Threshold screwed to jambs/
mullions with 10# Pan head stainless
steel self tapping screws.
Fit PVC/Santoprene roll-in wedge
between sub-sill and threshold.
Drainage slots
Sub-sills will significantly improve
water resistance.
30mm gap between underside
of door and underside of
threshold.
CAD file: DWG or DXF
AWS_400_50_3
Allow 20mm for the
threshold including packing
under sub-sill.
Seal sub-sill to structure at this point.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.43
INTERNAL OPENING DOOR THRESHOLD - 83
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Series 50 door bottom rail illustrated.
Internal Opening Hinged
Door Weather Resisting
Threshold
Co-extruded Santoprene seal.
Drainage holes.
Co-extruded Santoprene sill flap.
CAD file: DWG or DXF
AWS_400_50_3
112.44
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
INTERNAL OPENING DOOR THRESHOLD - 83
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
CAD file: DWG or DXF
AWS_400_50_3
Internal Opening Hinged
Door Weather Resisting
Threshold in Sub-sill
Co-extruded Santoprene seal.
Drainage holes.
Co-extruded Santoprene sill flap.
Sub-sill has 20 x 6mm drainage
slots @ approximately 400mm
centres.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.45
NURSING HOME DOOR THRESHOLD - 69
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Series 50 door bottom rail illustrated.
Nursing home sill threshold has been designed for wheel chair access.
7° Ramp angle.
Bottom rail
CAD file: DWG or DXF
AWS_400_50_3
22mm gap between underside of door
and underside of threshold.
Note:
This threshold is not suitable for sub-sill installation.
Note:
As there is a clear gap under the door
there is no water resistance with this type
of sill detail.
112.46
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
STANDARD FIXED SILL
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE
Australian Registered Design
Fit roll-in wedge between subsill and threshold on the inner
edge.
Allow 20mm for the threshold
including packing under sub-sill.
Drainage slots
Seal sub-sill to structure at this point.
Shim and fix sub-sill to structure @
450mm maximum centres.
Standard 'Z' sub-sills available for 80mm, 102mm
and 150mm frames.
The standard fixed sill comes in the three sill strength alternatives as shown
earlier in these notes.
We always recommend that these 102 x 44mm sills are fitted into sub-sills
as shown on this page.
These sub-sills should be stop ended to ensure that any water that gets
into this area is guided out of the system via the front drainage slots.
CAD file: DWG or DXF
AWS_400_FXD_1
Alternative flat sub-sills available.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.47
ALTERNATIVE TALL FIXED SILL
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
The special tall fixed sill (115 + 8mm) can be created with any
of the three door bottom rails, Series 50 bottom rail illustrated
right.
8mm Rail spacer nests into the bottom rail to get the height up
to align with adjoining door.
115
8
CAD file: DWG or DXF
AWS_400_50_4
Important Note:
Tall fixed sills can't be fitted into sub-sill.
Sub-sill as shown dotted is too wide for the tall sill.
112.48
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
SUB-HEAD AND SUB-JAMB DETAILS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE
20
30
DATE
150mm lengths of flat filler snapped
into head @ 450mm maximum
centres to ensure that the head stays
a tight fit in the sub-head.
CAD file: DWG or DXF
AWS_400_FXD_1
30
One piece sub-head available for
102mm and 150mm frames.
20
Two piece sub-jamb.
Fix the sub-jamb base to structure @
450mm max. centres. Seal to structure
on the inner line to match up with the
sub-sill caulking.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.49
DOUBLE GLAZED DOOR
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Series 52 door can be fitted with dedicated glazing beads that allow this door
to accept glass up to 24mm insulating glass units (IGU's).
Doors glazed with 24mm glass will be heavy and require a heavy duty frame
with more hinges to support the weight.
We can also have a 125mm midrail that will accept 24mm IGU's.
Top rail
CAD file: DWG or DXF
AWS_400_52_3
Bottom rail
112.50
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
DOUBLE GLAZED FIXED LIGHTS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Australian Registered Design
AWS have a custom adaptor that snaps into any of
the centre glazed pocket frames as shown right.
Double glazed units up to 24mm thick can be
security glazed same as single glazing with captive
wedge on the outside and roll-in wedge on the
inside.
Notes:
Double glazing adaptor won't snap to beaded sill/
transoms.
We can also have a 125mm midrail that will accept
IGU's.
CAD file: DWG or DXF
AWS_400_FXD_1
AWS also have a custom sill and jamb adaptor
(shown above) that will accept a variety of
glazing beads that allow double glazing.
Double glazed units up to 24mm thick can be
security glazed same as single glazing with
captive wedge on the outside and roll-in wedge
on the inside.
Important Note:
We always recommend sub-sills under
commercial frames.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.51
OVERHEAD SLIDING DOOR - HEAD
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE
Overhead running track fixed to head in line with top of head.
Cowdroy heavy duty overhead running gear.
Internal cover plate screwed to main running track @ 450mm
maximum centres.
Aluminium flat lugs support the lower edge of internal cover
plate.
Weatherpile seals.
Top rail
Series 50 door top rail illustrated.
CAD file: DWG or DXF
AWS_400_50_6
112.52
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
OVERHEAD SLIDING DOOR - HEAD
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
NOT TO SCALE
This detail shows the custom slider channel on sides to allow fitting of
commercial lock (shown on later details).
Height of doors can be adjusted using the wheel bolt.
Make sure the anti-lift roller bearing is within 1mm of the underside of
running rail. This keeps the rollers on the rail.
Sliding doors can be heavy so make sure the frame head is secured to
something substantial that can carry the load. With very heavy doors you
may need to get an engineer involved to design a header strong enough.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.53
OVERHEAD SLIDING DOOR - TRANSOM
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE
Overhead running track fixed to transom in line with top of
transom. It's also possible to lift the running track so the bottom
aligns with underside of transom. Aligning the track with
underside of transom would not be recommended for an
externally applied track as water would be dammed up above
the transom.
Cowdroy heavy duty overhead running gear.
Internal cover plate screwed to main running track @ 450mm
maximum centres.
Aluminium flat lugs support the lower edge of internal cover
plate.
Weatherpile seals.
Top rail
Series 50 door top rail illustrated.
CAD file: DWG or DXF
AWS_400_50_6
112.54
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
OVERHEAD SLIDING DOOR - TRANSOM
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
NOT TO SCALE
Height of doors can be adjusted using the
wheel bolt.
Make sure the anti-lift roller bearing is within
1mm of the underside of running rail. This
keeps the rollers on the rail.
This detail shows the custom slider channel
on sides to allow fitting of commercial lock
(shown on later details).
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.55
OVERHEAD SLIDING DOOR - JAMB
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
8mm Gap between door and frame
Sliding door fitted with commercial lock.
Spring keeper box fitted into dedicated extruded aluminium jamb channel.
Weatherpile door seal.
6mm setback to improve access to the lock key.
Shopfront frame shown dotted is optional. May be required to support
highlights over door.
CAD file: DWG or DXF
AWS_400_50_6
112.56
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
OVERHEAD SLIDING DOOR - MULLION
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE
4mm Door corner radius.
Stile
8mm Gap between door and frame
Series 50/51 door stile illustrated.
Weatherpile fringe seal.
Note:
Overhead sliding doors generally have a clear
opening under the door bottom rail (no track).
Therefore the doors would have no water
resistance.
If you are looking for a sliding door to keep water
out look at bottom rolling doors, shown later in
these notes.
Mullion
CAD file: DWG or DXF
AWS_400_50_6
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.57
OVERHEAD SLIDING DOOR - LIGHT WEIGHT
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
NTS
This light weight system is designed to support door panels up to 50Kg.
Ideal for entry and internal doors.
Series 50 and 52 doors can be used as we screw the top rollers down through custom
retention bracket into the door corner stake with 4.off 50mm long 10# pan head stainless
steel self tapping screws.
Head track buffer stop.
Head track and door panel cut away to
show stop and top roller assembly.
Important Note:
Make sure the head support channel is secured to something significant
that can carry the weight of heavy door panels.
Wood screws into timber lintel won't be good enough as the action
of opening and closing doors will eventually loosen or pull the screws
out.
We have a buffer for the head guide (shown above), we also
recommend that a buffer is fitted towards the bottom rail to prevent
panel jumping as it strikes the top buffer.
We also use this support system to carry LouvreMASTER™ shutters,
refer section 130.
112.58
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
OVERHEAD SLIDING DOOR - HEAD
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE
44
30
**
CAD file: DWG or DXF
AWS_400_50_6
Bolt the head running rail to support @
450mm max. cts. The support section has to
be capable of supporting the weight of the
door panels.
Centor E2 top hung sliding assembly roller
assembly.
4.off 50mm x 10# Pan head s.s. self tapping
screws through retention bracket into door
corner stake.
Extruded aluminium retention bracket.
** Nominal dimension 14mm Dimension
can vary between 11mm and 20mm.
Roller assembly
Extruded aluminium retention bracket
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.59
BOTTOM ROLLING SLIDING DOOR - HEAD
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
The channel frame can be
ganged up to get multiple
sliding doors, as indicated
with the dotted channel.
Top rail
Flat filler closes off unused recesses, as shown above and below on isometric
illustration.
Weatherpile seals.
Series 50 top rail illustrated.
CAD file: DWG or DXF
AWS_400_50_5
The hollow jamb channel has been designed to accept
commercial lock keeper, refer illustration later in these notes
for more information.
112.60
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
BOTTOM ROLLING SLIDING DOOR - TRANSOM
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Transom
Top rail
Shopfront transom.
17mm Gap
Channel support angle fixed to framing
transom and head channel. This support
angle also spaces the door at the right
distance to suit the door to frame
interlocking extrusions shown on
following pages.
CAD file: DWG or DXF
AWS_400_50_5
The perimeter channel frame and support angle
give a sharp clean finish to bottom rolling support
frame.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.61
BOTTOM ROLLING SLIDING DOOR - SILL
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE
Dropping the sliding door down in front of sill and fitting weatherbar to
close off the gap significantly increases the water resistance of this door.
17mm Gap
Series 50 door bottom rail illustrated.
Aluminium weatherbar fitted with weatherpile seal.
102mm x 44mm sill with snap-in pocket filler. The pocket area is used
to screw the sill down on wide openings. The flat pocket filler then
covers the screws.
Bottom rail
Seal sub-sill to structure at this point.
Shim and fix sub-sill to structure @ 450mm
maximum centres.
115mm wide x 40mm deep floor recess
The 40mm depth includes floor finish.
Heavy duty double bogey roller carriage.
Fix the running rail to aluminium channel, bury the channel into the
external floor finish as detailed left.
10mm Gap between rail and main frame.
CAD file: DWG or DXF
AWS_400_50_5
112.62
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
BOTTOM ROLLING SLIDING DOOR - SILL
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
NOT TO SCALE
The sill weatherbar extrusion also runs
up the mullion and interlocks with door
interlocker as shown left.
This with the double weatherpile seal
at this location keeps water on the
outside where it belongs.
Seal sub-sill to concrete floor slab in this
area.
Fix sub-sill to slab with Dynabolts @
450mm maximum centres.
Sill running rail must be fitted in the right
position (the right distance from frame).
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.63
BOTTOM ROLLING SLIDING DOOR - SILL
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE
14.60mm
Gap between
doors
CAD file: DWG or DXF
AWS_400_50_5
Series 50 door bottom rail illustrated.
Heavy duty double bogey roller carriage.
Bottom rail
Recessed floor channels fitted with extruded aluminium
running rails.
We recommend that the sill channels are fixed to
aluminium channel support section as shown below.
Sliding doors can be heavy, depending on size/glass
thickness fitted.
Flat filler closes off unused recesses.
Important Note:
The recessed area in floor has to be drained
via sump or open end, by builder.
150mm wide x 85mm deep floor recess
The 85mm depth includes floor finish and
25mm deep sill channel support section.
112.64
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
BOTTOM ROLLING SLIDING DOOR - SILL
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Series 50 door bottom
rail illustrated.
Bottom rail
Bottom rail
14.60mm Gap
between doors
The flat running rail has been designed so that when rails touch (as shown
above) doors are positioned at the right gap space to suit interlocks
shown on later page.
Support door panel weight before adjusting door height.
Wheel carriage can be fitted/removed without having to disassemble door
panels.
CAD file: DWG or DXF
AWS_400_50_5
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.65
BOTTOM ROLLING SLIDING DOOR - MULLION
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Interlock screwed to mullion and interlocks with door
interlocker as shown right.
Mullion
Mullion interlock.
Double weatherpile seal.
Door interlock.
17mm Gap between door stile
and main frame.
Meeting stile
CAD file: DWG or DXF
AWS_400_50_5
4mm Door corner radius.
112.66
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
BOTTOM ROLLING SLIDING DOOR - JAMB
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Jamb channel accepts Lockwood 591 or
Doric DN1001 lock spring loaded keeper.
Weatherpile seals.
Removable aluminium running rails.
Jamb
17mm Gap between
door stile and main
frame.
CAD file: DWG or DXF
AWS_400_50_5
Channel support angle fixed to framing jamb/mullion and jamb
channel. This support angle also spaces the door at the right
distance to suit the door to frame interlocking extrusions
shown on following pages.
Commercial lock.
Lock stile
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.67
BOTTOM ROLLING SLIDING DOOR - JAMB
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Flat filler closes off unused recesses, as shown above and below on isometric
illustration.
Weatherpile seals.
Commercial spring loaded keeper.
Double cylinder lock illustrated.
Series 50/51 stile illustrated.
14.60mm Gap
between doors
Lock stile
Series 50 door panel illustrated.
Heavy duty double bogey roller carriage.
Sliding doors can be heavy, depending
on size/glass thickness fitted.
Flat filler closes off unwanted recesses.
CAD file: DWG or DXF
AWS_400_50_5
112.68
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
BOTTOM ROLLING SLIDING DOOR - MTG. STILES
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Meeting stile
14.60mm Gap
between doors
Door interlocks nest into slider stile to
make sure they fall in the correct position
for correct door positioning as shown left.
Interlocks screwed to stiles with stainless
steel screws @ 300mm max. centres.
Meeting stile
Double weatherpile sealed.
4mm Door corner radius.
The flat running rail has been designed so
that when rails touch (as shown below)
doors are positioned at the right gap space
to suit door to door interlocks shown
above.
CAD file: DWG or DXF
AWS_400_50_5
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.69
BOTTOM ROLLING SLIDING DOOR - JAMB
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 07
REPLACES
JUN 06
SCALE
FULL SIZE & NTS
Fixed stile
Weatherpile seals.
Flat filler closes off unused recesses, as shown
right and below on isometric illustration.
Series 50/51 stiles illustrated.
Perimeter channel has been mitred at head and sill. Gussets
and spigot to keep the joint tight and waterproof.
Alternative:
You could use the channel perimeter frames on head and
jambs only with flat running rails on sill, refer page 61 for
detail of flat running rails.
CAD file: DWG or DXF
AWS_400_50_5
112.70
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
ANDO™ LEVER LOCK SET
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
HALF FULL SIZE & NTS
Extruded aluminium bolt
guide.
Extruded aluminium bolt
guide.
Stainless steel bolt tips.
Stainless steel extension
bar snaps into the activator
body.
ANDO™ four point
lever lock illustrated.
ANDO™ key locking
twinbolt activator. Key on
the inside only.
See the ANDO™ twinbolts open
and close on our web site:
www.awscommercial.com.au
AWS Custom glass
filled nylon keeper.
12345678901234567890123456789012
12345678901234567890123456789012
12345678901234567890123456789012
Note:
12345678901234567890123456789012
12345678901234567890123456789012
12345678901234567890123456789012
ANDO™ lever lock sets
12345678901234567890123456789012
12345678901234567890123456789012
12345678901234567890123456789012
and twinbolts are designed
12345678901234567890123456789012
12345678901234567890123456789012
12345678901234567890123456789012
for residential applications.
12345678901234567890123456789012
12345678901234567890123456789012
12345678901234567890123456789012
Custom nylon keeper
ANDO™ short backset lock
with ANDO™ twinbolt in the
keeper stile.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.71
'MIRO' & ICON™ LEVER LOCK SET
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE NOV 08
REPLACES
MAR 08
SCALE HALF FULL SIZE & NTS
Extruded aluminium bolt
guide.
Extension bar screws into
the activator body.
ICON™ locks are only
available in 316 stainless
steel finish.
'MIRO' key locking
twinbolt activator. Key on
the inside only.
AWS Custom glass
filled nylon keeper.
See the 'Miro' twinbolts open and close on our web
site: www.awscommercial.com.au
123456789012345678901234567890121
123456789012345678901234567890121
123456789012345678901234567890121
123456789012345678901234567890121
Note: Miro & ICON™
123456789012345678901234567890121
123456789012345678901234567890121
123456789012345678901234567890121
Lever lock sets and
123456789012345678901234567890121
123456789012345678901234567890121
123456789012345678901234567890121
twinbolts are designed for
123456789012345678901234567890121
123456789012345678901234567890121
123456789012345678901234567890121
residential applications.
123456789012345678901234567890121
123456789012345678901234567890121
123456789012345678901234567890121
Custom nylon keeper
'MIRO' short backset lock
with 'MIRO' twinbolt in the
keeper stile.
112.72
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
LOCKWOOD 590 LOCK DETAILS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
23mm backset commercial lock
MAR 08
REPLACES
MAR 07
SCALE
HALF FULL SIZE & NTS
Optional lever latch cylinder
Standard lock cylinder
Cover plates
Optional snib cylinder
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.73
LOCKWOOD 591 LOCK DETAILS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
HALF FULL SIZE & NTS
A dedicated tubular keeper channel will accept the
Lockwood 591 spring loaded keeper.
Machine slot in channel to accept keeper.
Commercial sliding door lock.
Spring loaded keeper.
Mitred channel corners
supported with spigot and
gussets to make sure the joint
stays tight.
Sill running rail nests into the sill channel and is fixed to same
with 8# Pan head s.s. self tapping screws.
112.74
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
LOCKWOOD 3580 LOCK DETAILS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
HALF FULL SIZE & NTS
Rebated stiles have been designed to accept a variety of
locks and bolts in the keeper stile as shown later in these
notes.
Lockwood Series 3580 short backset cylinder mortice lock- 30mm
backset, with Lockwood Series 4800 or 5800 furniture.
There are numerous lock and furniture options refer Lockwood
catalogue and/or web site (www.lockwoodsecurity.com).
AWS Series 50/51 door French stile illustrated. This lock can also be
fitted into Series 52 fully beaded French stile.
AWS Custom glass
filled nylon keeper.
Lockwood Series 3580 short backset cylinder mortice lock- 23mm backset.
The 25.40mm backset lock will also fit into AWS stiles, this would move the
furniture another 2.40mm off the edge of lock stile, with Lockwood Series
4800 or 5800 furniture.
There are numerous lock and furniture options refer Lockwood catalogue and/
or web site (www.lockwoodsecurity.com).
AWS Series 50/51 door wiper stile illustrated. This lock can also be fitted into
Series 52 fully beaded wiper stile.
Rebated French meeting stiles
Conventional lock stile
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.75
LOCKWOOD 3572 LOCK DETAILS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
HALF FULL SIZE & NTS
Lockwood Series 3572 vestibule lock- 60mm backset,
with Lockwood Series 1800 or 2800 furniture.
There are numerous lock and furniture options refer Lockwood catalogue
and/or web site (www.lockwoodsecurity.com).
AWS Series 50/51 door wide wiper stile illustrated. This lock can also be
fitted into Series 52 fully beaded wide wiper stile.
Basically this is a timber lock so we have fitted two treated hardwood
timber blocks into stile above and below lock. These blocks are screwed
to stile from the glazing pocket area. The lock is then screwed to timber
blocks.
Wide stile
112.76
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
FLUSH BOLT DETAILS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
NOT TO SCALE
Recessed finger operated flush bolt. Used on conventional door stiles
and sliding door stiles.
Custom aluminium bolt guide prevents the bolt from turning and
dropping.
Surface mounted finger operated flushbolt. Used on rebated French
meeting stiles.
Custom aluminium bolt guide prevents the bolt from turning and
dropping.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.77
COMMERCIAL GLAZING ADAPTORS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Alternative square bead
Splayed bead
12mm glazing gap
suits glass up to 6.76mm thick
Alternative square bead
Splayed bead
16mm glazing gap
suits glass up to 12.38mm thick
Alternative square bead
Splayed bead
22mm glazing gap
suits glass up to 16mm thick
40mm wide glazing adaptor
This glazing adaptor has been designed to take the large variety
of beads.
The adaptor measures 40mm wide by 30mm high.
Square bead
26mm glazing gap
suits glass up to 20mm thick
The glazing area suits captive wedge one side with roll-in wedge
on the other as shown above.
Beading options:
• Splayed all round (up to 22mm gap).
• Splayed horizontals with square verticals (up to 22mm gap).
• Square all round (up to 31mm gap).
Square bead
31mm glazing gap
suits glass up to 24mm thick
112.78
CAD file: DWG or DXF
AWS_400_FXD_1
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
COMMERCIAL GLAZING ADAPTORS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Beaded narrow glazing adaptor
This 28mm wide by 30mm high glazing adaptor
has been designed to accept a pressure bead as
shown right and give an 18mm wide glazing
pocket.
Suitable for glass up to 12.38mm thick.
Using a wider bead all round we
could reduce the pocket width
to 13mm, making it suitable for
8.38mm glass.
If we use the wider bead we get a glazing pocket
13mm wide. This would be suitable for glass up
to 8.38mm thick.
Narrow beaded glazing
adaptor.
18mm glazing gap suits
glass up to 12.38mm thick.
Narrow wrap around glazing channel 28mm wide by 30mm deep.
18mm glazing gap suits glass up to 12.38mm thick.
Glazing channels
We have a variety of wrap around glazing
channels as shown on this page.
The channels have screw ports and gusset
acceptors to ensure tight clean joints.
Wrap around glazing channel 36mm wide by 30mm deep.
25mm glazing gap suits glass up to 20mm thick.
Wrap around glazing channel 36mm wide by 45mm deep.
25mm glazing gap suits glass up to 20mm thick.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.79
ALUMINIUM FIXED LOUVRES
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
102mm Perimeter 'Z' Frame
This frame would be ideal for stand alone frames into prepared
openings.
Will accept both of the 102mm blades (single and double
throated).
Frame corners are mitred and spiggoted.
Blades can also be installed into 102mm CentreGLAZE™ or
FrontGLAZE™ framing as shown below.
102mm Blade Support Bracket
If the blade length exceeds 1200mm fit 50mm lengths support
bracket. Fix these brackets through lower blade to intermediate 25
x 20 x 3mm 'U' channel support.
There will also be situations in higher wind load areas where you
may want to fit the brackets at less than 1200mm.
Note:
These support brackets can only be used when blades are at the
standard pitch, as shown on following page.
112.80
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
ALUMINIUM FIXED LOUVRES
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Single throated 102mm blade
The airflow through the blades varies as the pitch
of the blades closes up, typical examples shown
below:
Pitch
Blade air flow
Standard 111mm
55%
100mm
54%
Blade fixing centres:
This blade can be fitted into Series 400
CentreGLAZE™ and Series 406 FrontGLAZE™
framing as shown on this page.
If the blade length exceeds 1200mm fit 50mm lengths of
support bracket to stabilise the blades.
Note:
These support brackets can only be used when blades
are at the standard pitch.
Double throated 102mm blade
The airflow through the blades varies as the pitch
of the blades closes up, typical examples shown
below:
Pitch
Blade air flow
Standard 124mm
50%
115mm
48%
100mm
45%
Blade fixing centres:
This blade can be fitted into Series 400
CentreGLAZE™ and Series 406 FrontGLAZE™
framing as shown on this page.
CAD file: DWG or DXF
AWS_400_7
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.81
ALUMINIUM FIXED LOUVRES IN DOOR PANEL
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Double throated 50mm blade
This blade has been designed to go into the 50mm thick Series 50 and
Series 51 doors.
The louvres are fabricated as a unit with a jamb inlay adaptor.
Insert the louvre frame into an assembled door panel.
Screw fix the louvre panel to the door stile.
The 2.50mm wide gap on jamb inlay adaptor will accept bird wire.
Louvres can be installed into hinged, Bi-fold and sliding doors.
112.82
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
ALUMINIUM FIXED LOUVRES IN DOOR PANEL
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Series 50 door top rail
1.6mm Aluminium angle,
size will vary to suit overall
panel height.
Double throated 50mm blade
The airflow through the blades is shown below:
Pitch
Blade air flow
Standard 50mm
44%
Blade fixing centres:
This blade can be fitted into Series 50 and Series
51 doors as shown on this page.
We only supply the jamb inlay adaptor premachined to suit the 50mm blade pitch.
Series 50 door bottom rail
CAD file: DWG or DXF
AWS_400_7
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.83
ADJUSTABLE GLASS LOUVRE INSERT
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
NOT TO SCALE
Flyscreen insert channel with custom
nylon spring clips.
Louvre sill/head adaptor.
Designed to accept aluminium
weather bar and co-extruded
Santoprene louvre weather
flap.
112.84
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
ADJUSTABLE GLASS LOUVRE INSERT
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
53
Screw adaptor to head under the louvre weather bar with 8# Csk. u/c head
self tapping screws.
Co-extruded Santoprene louvre seal.
7
Co-extruded Santoprene louvre seal.
6mm dia. drainage holes in and out of weather bar, 50mm from both ends.
Screw adaptor to sill under the louvre weather bar with 8# Csk. u/c head self
tapping screws.
Seal sill adaptor to sill with small joint caulking.
Standard adaptor 81130
200Pa water resistance.
Alternative performance
adaptor 81128
300Pa water resistance.
Moulded nylon flyscreen clip.
Flyscreen adaptor designed to accept extruded flyscreen (plain as drawn) or
72815 (barrier).
Screw adaptor to jambs with 8# Pan head s.s. self tapping screws.
Flyscreening.
The flyscreen has been designed to accept
flyscreens without unsightly turnbuckles.
We use a custom nylon spring clip in the jamb
channel to secure flyscreens.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.85
AWNING SASH IN COMMERCIAL FRAMING
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Manual chain winder with rust
proof Polesium™ body and base
and stainless steel chain as
standard.
Custom extruded flyscreen can be
fitted neatly on the winder base
upstand.
One of the double seal facing
sashes illustrated.
Sash 72837
Custom winder base to support
chain winder.
We also offer an Architectural
version of this window with
integrated winder base and nailing
fin frame - ideal for brick veneer
and cavity brick installation.
CAD file: DWG or DXF
AWS_400_AWN
Polesium™ winder can be supplied left or right hand, left hand
illustrated above.
Winders come with 304 stainless steel chains as standard.
Standard chain throw is 250mm, short 150mm throw available
for high sashes.
112.86
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
AWNING SASH IN COMMERCIAL FRAMING
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Concealed electric winder.
Custom extruded flyscreen can be fitted neatly
onto the winder cover.
Snap-on cover allows future access to winder.
Splayed glazing beads illustrated, square beads also
available.
Custom winder base and cover designed
specifically for this winder, lifts the winder chain
above the weather seal - improved weather
performance.
One of the single seal non-facing sashes
illustrated.
This type of winder would be ideal for awnings
over doors or awnings in elevated situations.
Sash 72840
Sash stop snaps into pocketed frame.
Any AWS CentreGLAZE™ pocketed frame.
CAD file: DWG or DXF
AWS_400_AWN
Conel heavy duty electric winder.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.87
AWNING SASH IN COMMERCIAL FRAMING
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Externally beaded sash 72840
Alternative internally beaded sash
72841.
Miro Wedgeless cam handles.
These custom cam handles are designed to
match other AWS hardware.
The important features with this type of cam
handle:
• Keeper is part of the cam handle.
• No keeper fixings required through the
weatherbar
Sash stop snaps into pocketed frame.
CAD file: DWG or DXF
AWS_400_AWN
Any AWS CentreGLAZE™ pocketed frame.
See the Miro cam handles open and close on our web
site: www.awscommercial.com.au
The cam cowling clips over the cam handler after
fixing to sash. This conceals the cam to sash fixing
screws.
Cam handle comes in left and right hand, right
hand illustrated above.
112.88
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
AWNING SASH IN COMMERCIAL FRAMING
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Sash Options
72836
Facing wrap around 40mm sash will
accept glass up to 6.76mm thick.
72839
Facing externally beaded 50mm
sash will accept glass up to 24mm
thick.
72837
Facing externally beaded 40mm
sash will accept glass up to 24mm
thick.
72840
Non-facing externally beaded
40mm sash will accept glass up to
24mm thick.
CAD file: DWG or DXF
AWS_400_AWN
72838
Facing internally beaded 40mm
sash will accept glass up to 24mm
thick.
72841
Non-facing internally beaded
40mm sash will accept glass up to
24mm thick.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.89
AWNING SASH IN COMMERCIAL FRAMING
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
34mm Insulating glass unit with integrated Ventian blind
Awning & Casement Sashes
•
Custom double beaded sash that will accept- 34mm thick
insulating glass with inbuilt venetian blind.
•
This glass can be inlaid into awnings and casements.
•
Awning sashes can be operated with manual or concealed
electric winders or cam handles.
•
Minimum sash width 400mm.
72842
Double beaded sash
112.90
Manual chain winder with rust
proof Polesium™ body and base
and stainless steel chain as standard.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
AWNING SASH IN COMMERCIAL FRAMING
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
LouvreMASTER™ sun control shutters into
Awning & Casement Sashes
•
LouvreMASTER™ shutters can be snapped into
awnings and casements as shown on this page.
•
We have cut a dedicated double beaded sash
to accept the shutter adaptors.
•
Awning sashes can be opened and closed and
secured with:
• Manual cam handles.
• Manual chain winders.
• Concealed electric chain winders.
•
The sashes have been shown in the nailing fin
frame.
This could be any of the Series 400
CentreGLAZE™, Series 406 and 606
FrontGLAZE™ and Series 80 Narrow offset
frames.
Important Note:
Awning and casement sashes fitted with
LouvreMASTER™ shutters are not waterproof.
Size Limitations:
Minimum sash height
Maximum sash height
Maximum sash width
= 462mm
= 2100mm
= 1000mm
72842
Double beaded sash
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.91
FLYDOOR INLAY
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
4
32
DATE
80mm
The custom adaptor shown on this page
makes it possible to fit hinged flydoors to
CentreGLAZE™ framing professionally.
44mm wide flydoor frame matches
shopfront framing.
Flydoor frame secretly fixed to shopfront
frame.
Will accept 20mm thick flydoors.
80mm gap between doors.
CAD file: DWG or DXF
AWS_install_4
112.92
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
ARCHITECTURAL AWNING & CASEMENT WINDOWS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
This AWS Architectural commercial system
has dedicated frame and jamb adaptor
extrusions to accept custom heavy duty
awning and casement sashes designed to
accept Truth™ hardware.
The frame will accept flyscreens.
Heavy duty glass filled nylon corner stakes
and gussets ensure that the sash corners
are up to the job.
Sashes will accept glass from 4mm to 24mm
thick.
Go to Series 467, section 187 for more
details on this Architectural commercial
window.
CAD file: DWG or DXF
AWS_467_1
Nailing fin sub-sill as shown left is
standard on Series 467 windows.
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.93
ARCHITECTURAL AWNING & CASEMENT WINDOWS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Internally beaded
sash 72841
Alternative externally beaded sash
72840.
refer Series 466, section 186 for more
details on awning and casement
Architectural commercial windows.
Miro Wedgeless cam handles.
These custom cam handles are designed to
match other AWS hardware.
The important features with this type of cam
handle:
• Keeper is part of the cam handle.
• No keeper fixings required through the
weatherbar.
Sub-sill standard on Series 466 windows.
Go to Series 466, section 186 for more
details.
CAD file: DWG or DXF
AWS_466_1
See the Miro cam handles open and close on our web
site: www.awscommercial.com.au
The cam cowling clips over the cam handler after
fixing to sash. This conceals the cam to sash fixing
screws.
Cam handle comes in left and right hand, right
hand illustrated above.
112.94
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
ARCHITECTURAL AWNING & CASEMENT WINDOWS
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Custom winder sill designed to accept
manual chain winder.
The important features with this type of sill:
• Designed to accept winder without
adaptors.
• Will accept optional flyscreens.
• High water resistance.
Externally beaded sash shown on this detail,
we also have an internally beaded sash as
shown on previous page.
Sub-sill standard on Series 466 windows.
Go to Series 466, section 186 for more
details.
Corrosion resistant chain winder features:
• 304 Stainless steel chain.
• Corrosion resistant nylon base.
• Key lockable.
• Fold down handle to clear curtains and blinds.
See the chain winder open and close on our web
site: www.awscommercial.com.au
This window can also be fitted with concealed
electric winder, refer section 186 for more details.
CAD file: DWG or DXF
AWS_466_1
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.95
ARCHITECTURAL DOUBLE-HUNG INLAY
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
MAR 07
SCALE
FULL SIZE & NTS
Jamb
Standard 30mm nailing fin jamb shown above.
We have dedicated frames and sashes that allow us to fabricate this heavy duty
Architectural window.
Go to Series 463, section 183 for more details on this Architectural commercial
window.
44mm wide jamb available.
Sub-sill standard on Series 463 windows.
CAD file: DWG or DXF
AWS_463_1
112.96
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
ARCHITECTURAL SASHLESS DOUBLE-HUNG WINDOW
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
SCALE
FULL SIZE & NTS
Jamb
Alternative 44mm nailing fin jamb.
ClearVENT™ jamb insert has been designed
to sit tight into the custom frame.
AWS offer two types of ClearVENT™ insert:
• Flyscreen version (shown left).
• Non-flyscreen version - no external screen
acceptor channel also available.
Custom optional extruded flyscreen.
Weatherpile sealed.
Go to Series 464, section 184 for more details
on this Architectural commercial window.
Including full size sections through head and
sill.
ClearVENT™ panels can be secured with press button keylock, shown
above left.
Non-keylock latch also available, shown above right.
Flyscreen retained with custom nylon clips that snap into screen
acceptor channel - no rivets or turnbuckles required.
External view of head to jamb intersection with flyscreen option.
CAD file: DWG or DXF
AWS_464_1
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE
112.97
ARCHITECTURAL SLIDING WINDOW INLAY
SERIES 400 CentreGLAZE™ SHOPFRONT FRAMING
DATE
MAR 08
REPLACES
SCALE
FULL SIZE & NTS
Jamb
Standard 30mm nailing fin jamb shown left.
We have dedicated frames and sashes that
allow us to fabricate this heavy duty
Architectural window.
Go to Series 462, section 182 for more
details on this Architectural commercial
window. Including full size sections through
head and sill.
30mm Standard nailing fin frame illustrated.
Alternative 44mm jamb available.
Window can be fitted with surface mounted
or mortice type locks. You can view the
lock options in colour on our web site
www.awscommercial.com.au
Sub-sill standard on Series 462 windows.
CAD file: DWG or DXF
AWS_462_1
112.98
AWS COMMERCIAL © ARCHITECTURAL INFORMATION • DETAILS SUBJECT TO CHANGE WITHOUT NOTICE