Product Guide - Quantum Audio Designs

Table Of Contents
Introduction To Our Product Line
(Page 2)
Guitar/ Instrument Cables- SI, HSI, SQI, HSQI,
HSQI G, Quiet Plug, BI, EPI, CEPI
(Pages 3 to 7)
Instrument Cables (Cloth-Jacketed Cables)- CI, CSQI
(Pages 8 to 9)
Patch Cables- UP and BP (Page 10)
MIDI Cables- QM (Page 11)
MIC Cables- LTHM, LM, SQLM, HM2, HM3 and Vintage Mic Cables
(Pages 12 to 15)
Cloth-Jacketed Cables- CLM, CHM (Pages 16 to 17)
Specialty “Y” Cables- SY (Page 18)
Speaker Cables- SC 12, SC 14, SC 16, and SC18 Series Cables, NSSC8 Series,
NSSC4 Series and Multichannel Speaker Cables
(Pages 19 to 22)
Audio Snakes and Multi-Track Cables- Performer Series Audio Snakes,
Performer Series Multi-Tracks Series, Gigline Snakes and Gigline Power Snakes
(Pages 23 to 28)
Direct Boxes- Match-Maker Direct Box (Page 29)
SAB Series Speakon Adapter Boxes- SAB-202, SAB-Q02, SAB-404
and SAB-402Q (Page 30)
Floor Pocket Boxes- MFBOX, MFBOX5 and MFBOX8 (Page 31)
Stainless Steel Wall Plates- Custom and Measured Ones
(Page 32)
Installation Grade- Bulk Wire, Bulk Quantum Cable, Bulk Connectors
and Audio Adapters
(Page 33 to 39)
Warranty Policies
(Page 40)
1
email at sales@quantumaudiodesigns.com
1.888.545.4404 fax 1.573.545.4411
AN INTRODUCTION TO OUR PRODUCT LINE
Quantum Audio Designs interconnects are designed to provide the highest fidelity, most
reliable cable interfaces, at truly affordable price points, available within our market today.
Our overall design strategy has been to develop cable products that actually provide better
fidelity and tonal qualities than the multitude of competitive cable products that offer only
mediocre performance at best. We pride ourselves on producing products that we, as
musicians, as well as any other discerning musician, would want to use to improve their
overall sound quality. Our company’s decision to follow this design philosophy has seemed
to be the correct path, since, to date, we have yet to meet a musician that told us that they
were not interested in products that would improve their overall tonal quality, audio clarity,
or prove to be a more reliable product.
To accomplish our goal of producing better sounding products, it has required that higher
quality component parts and connectors, higher performance conductor and insulating
materials, and often, a greater quantity of those materials, be incorporated into our products.
Although this is not the least expensive way to produce audio cable products, it is the only
way to assure the performance and reliability levels we demand will be met.
All too often, we hear from both dealers, and end-users alike, that until they had experienced
the improvement in sonic quality of our audio cable products, as compared to that of other
brands that they have used, they had assumed there was no difference in the performance
levels of various cable products. Many of these people had erroneously been told there was
really no difference in sound quality between cables and that the best approach to cables was
to buy those with the cheapest price. Conversely we have found that, once exposed to audio
cable products offering better audio clarity and tonal response, end-users realize the sonic
improvements that can be achieved and are more than willing to pay a nominally higher
price for this increased performance. These end-users often become the most loyal
customers to the dealers that “turned them on” to the fact that there is better performance to
be had and that the overall “value” of such products greatly outweigh a slightly higher
purchase price.
Since our company’s inception, we have felt that the most effective way to promote the long
term health of our company is to provide our dealer base with a product line which promotes
the development of long term customers for their businesses. We’ve always felt that the best
way to accomplish this is to provide our dealers with exceptional products at truly value
oriented price points, that their customer base will purchase, appreciate, and, eventually,
demand on a repetitive basis. Although many cable manufacturers consider our “quasiaudiophile” approach to cable design a bit extreme, we have chosen this approach as to
guarantee every user of Quantum products our whole-hearted commitment to quality,
performance, and more so, the quality of their performance. At Quantum, we feel it is better
to design and build exceptional quality and performance into every product, rather than have
to apologize for lack of either in any of our products.
QUANTUM AUDIO DESIGNS, INC.
Shipping: #1 Quantum Drive
Mailing: P.O. Box 130
Benton, MO 63736
Benton, MO 63736
Phone: 1.573.545.4404
Toll Free Phone: 1.888.545.4404
Fax: 1.573.545.4411
Email: sales@quantumaudiodesigns.com
2
SI SERIES
instrument cables
3
The SI series instrument cables are designed to offer exceptional audio performance, while
providing the user with an extremely durable cable. Heavy duty G & H brand ¼” phone plugs
are hand soldered to guarantee a perfect connection. The SI series incorporates our Q-2000
series single conductor audio cable. The Q-2000 series wire is designed specifically for use
as an instrument cable. The Q-2000 series wire is designed specifically for use as an
instrument cable; therefore, great attention was given to assure this cable would be as
immune to mechanical handling noise as practically possible. To provide you with the
ultimate in audio fidelity, the Q-2000 series cable utilizes finely stranded bare copper wire
for the center conductor and overall shield. By utilizing this finely stranded conductor
material, both the high frequency audio performance and overall physical flexibility of the
cable is improved. A specially formulated center conductor insulation material is
incorporated to reduce nominal capacitance, improving audio fidelity. To assure that your
audio signal will remain intact, the Q-2000 cable incorporates a served shield with 75%
overall coverage to provide the necessary protection against outside interference while
maintaining excellent flexibility.
MODEL
SI-1/3 RR
SI-1/2 RR
SI-1
SI-3
SI-6
SI-8
SI-10
SI-12
SI-15
SI-18
SI-20
SI-25
SI-30
LENGTH
4 IN.
6 IN.
1 FT.
3 FT.
6 FT.
8 FT.
10 FT.
12 FT.
15 FT.
18 FT.
20 FT.
25 FT.
30 FT.
HSI SERIES
The Quantum HSI, Heat Shrink Instrument, series cable utilizes our Q-2000 series audio
cable with G & H brand ¼” phone plug terminations. During the manufacturing process, hot
melt epoxy compound is injected into the connector cavity to provide an insulator against the
possibility of a short developing inside the connector, as well as provide strain relieve on the
actual solder joints. After final assembly of the cable is complete, a section of heat shrinkable
tubing is placed over the connector barrel and shrunk into place to provide additional strain
relief. Custom imprinting of the heat shrink tubing with dealer logo or name, and telephone
number is available upon request with orders of 24 or more HSI series cables.
MODEL
HSI-1/3 RR
HSI-1/2 RR
HSI-1
HSI-3
HSI-6
HSI-8
HSI-10
HSI-12
HSI-18
HSI-20
HSI-25
HSI-30
LENGTH
4 IN.
6 IN.
1 FT.
3 FT.
6 FT.
8 FT.
10 FT.
12 FT.
18 FT.
20 FT.
25 FT.
30 FT.
email at sales@quantumaudiodesigns.com
1.888.545.4404 fax 1.573.545.4411
Our Studio Quality Instrument (SQI), series cables are designed with the truly performance
conscience musician in mind. Oxygen-free high conductivity copper is utilized on both the center
conductor and shield to provide the best audio path possible. Individual copper strands that make
up the center conductor and shield are extremely small in diameter in an effort to increase the
high-end frequency response, improving overall fidelity. The 95% coverage serve shield assures
you that the audio signal will remain intact in even the most adverse conditions. The outer
jacketing of the cable is a special formulation of PVC compounds which provide exceptional
flexibility and durability as well as protection against the mechanical handling noise often
encountered in many of our competitor’s cables. All SQI series cables are hand-soldered with
heavy-duty G & H brand connectors to provide a quality connection that will perform flawlessly
for years. Overall tonal balance of SQI series cables is exceptional, with solidly defined bass
response and crystal clear highs. The SQI cables seem to excel when used in combination with
single coil pickup designs or piezo electric transducers.
SQI series cables are available in a variety of colors including black, red, blue, green,
yellow, violet, gray and white. Custom SQI series cables with Amphenol, Switchcraft or
Neutrik brand connectors are also available upon request.
MODEL
HSQI SERIES
SQI-1/3 RR
SQI-1/2 RR
SQI-1
SQI-3
SQI-6
SQI-8
SQI-10
SQI-12
SQI-15
SQI-18
SQI-20
SQI-25
SQI-30
LENGTH
4 IN.
6 IN.
1 FT.
3 FT.
6 FT.
8 FT.
10 FT.
12 FT.
15 FT.
18 FT.
20 FT.
25 FT.
30 FT.
Our HSQI, Heat Shrink Studio Quality Instrument, series cables are designed to provide the
performing musician with a cable that is both extremely durable as well as offering
exceptional audio fidelity. Utilizing the same Q-2100 series audio cable with G & H brand
¼” phone plug terminations that is used in the SQI series cables, the HSQI series cables are
subjected to additional manufacturing procedures to further improve performance. During the
manufacturing process, hot melt epoxy compound is injected into the connector cavity to
provide an insulator against the possibility of a short developing inside the connector as well
as provide strain relief on the actual solder joints. After final assembly of the cable is
complete, a section of heat shrinkable tubing is placed over the connector barrel and shrunk
into place to provide additional strain relief. Custom imprinting of the heat shrink tubing with
dealer logo or name and telephone number is available upon request with orders of 24 or
more HSQI series cables.
MODEL LENGTH
HSQI-1/3 RR
HSQI-1/2 RR
HSQI-1
HSQI-3
HSQI-6
HSQI-8
HSQI-10
HSQI-12
HSQI-15
HSQI-18
HSQI-20
HSQI-25
HSQI-30
4 IN.
6 IN.
1 FT.
3 FT.
6 FT.
8 FT.
10 FT.
12 FT.
15 FT.
18 FT.
20 FT.
25 FT.
30 FT.
instrument cables
SQI SERIES
4
HSQI G CABLES
instrument cables
5
The Quantum HSQI G Series instrument cables incorporate our high performance Q-2100
Oxygen- Free instrument cable and outer heat shrink process with gold-plated G & H brand
¼” phone plugs. This combination of component materials provides exceptional fidelity
audio fidelity and overall durability. While the 20 gauge conductor and 95% shield coverage
of the Q-2100 cable provide truly high fidelity performance, the gold-plated phone plugs help
increase conductivity for the audio signal. As with our other heat shrink cable assemblies,
custom imprints are available on orders of 24 or more HSQI G cables. All HSQI G series
cables are available in a variety of colors including black, red, blue, green, yellow, violet,
gray, and white.
MODEL
HSQI-1G
HSQI-2G
HSQI-3G
HSQI-6G
HSQI-8G
HSQI-10G
HSQI-12G
HSQI-15G
HSQI-18G
HSQI-20G
HSQI-25G
HSQI-30G
LENGTH
1 FT.
2 FT.
3 FT.
6 FT.
8 FT.
10 FT.
12 FT.
15 FT.
18 FT.
20 FT.
25 FT.
30 FT.
QUIET PLUG CABLES (SQI Q AND HSQI Q)
To accommodate guitarists that change instruments during a performance and wish to avoid
the “pop and hum” often encountered during this operation, we offer the option of the G & H
Quiet Plug on our SQI and HSQI series instrument cables. Through the incorporation of a
uniquely designed, spring-loaded shunt, this connector allows the user to plug into and
unplug from instruments while maintaining a virtually noise-free environment. All SQI Q
and HSQI Q series cables are available in a variety of colors including black, red, blue, green,
yellow, violet, gray and white.
MODEL
LENGTH
MODEL
LENGTH
SQI-10Q
SQI-12Q
SQI-15Q
SQI-18Q
SQI-20Q
SQI-25Q
SQI-30Q
HSQI-10Q
HSQI-12Q
HSQI-15Q
HSQI-18Q
HSQI-20Q
HSQI-25Q
HSQI-30Q
10 FT.
12 FT.
15 FT.
18 FT.
20 FT.
25 FT.
30 FT.
10 FT.
12 FT.
15 FT.
18 FT.
20 FT.
25 FT.
30 FT.
email at sales@quantumaudiodesigns.com
1.888.545.4404 fax 1.573.545.4411
The BI Series Instrument cables were specifically designed with the bass guitarist in mind.
The BI series cables utilize our Q-2200 series instrument cable which incorporates an
oxygen-free 18-gauge center conductor and a 95% coverage served shield as to provide a
more stable platform for lower frequency information transmission. The BI cables
incorporate nickel- plated G &H brand ¼” phone plugs to provide one of the most reliable
connections possible. The BI cable’s overall tonal response is tailored to provide a tighter
low frequency response, a more sedate upper midrange and slightly rolled off high frequency
range. The BI cable’s overall tonal response tends make this cable a viable choice for bassists
who prefer a rounder sounding response, and guitarists who strive for a more jazz oriented, or
vintage 50’s / early 60’s tone. Options for the BI series cables include right angle phone
plugs (suffix “R”) and/ or outer heat shrink (use “HBI” for series) for an extra fee.
MODEL LENGTH
BI-10
BI-12
BI-15
BI-18
BI-20
BI-25
BI-30
10 FT.
12 FT.
15 FT.
18 FT.
20 FT.
25 FT.
30 FT.
MODEL LENGTH
HBI-10
HBI-12
HBI-15
HBI-18
HBI-20
HBI-25
HBI-30
10 FT.
12 FT.
15 FT.
18 FT.
20 FT.
25 FT.
30 FT.
Qa
d
uantum
udio
esigns
instrument cables
BASS INSTRUMENT SERIES
6
EPI SERIES
instrument cables
7
The Quantum EPI, Enhanced Performance Instrument, series cables are designed to offer the
utmost in audio fidelity while being durable enough to meet the rigors of touring
applications. Due to the cable’s extremely tight & well defined low frequency characteristics,
as well as it’s precise high end detail, most listeners refer to this cable as “the most in your
face sounding cable” they’ve ever experienced. Due to it’s “full bodied” tonal qualities, the
EPI series cables tend to be a favorite with guitarists using humbucker pickup designs, as
well as bass guitarists that lean toward more percussive playing styles. All EPI series cables
utilize our Q-2300 series oxygen-free, high definition audio cable. This cable design
incorporates a combination of materials and construction specifications that produce possibly
the finest audio performance levels you’ve ever experienced! The EPI utilizes an extremely
large gauge center conductor, which is constructed of finely stranded oxygen-free copper. An
extremely low capacitance insulation material is used as to produce incredible audio clarity
and frequency response. The incorporation a 95% coverage braided shield provides
maximum strength which permits this cable to handle the physical abuse encountered in
professional sound reinforcement applications. To ensure the best signal path possible, the
EPI series cables are terminated with gold-plated G & H brand ¼” phone plugs. For added
durability, EPI series cables incorporate our heat shrink process in which the connector cavity
is filled with hot melt epoxy and heat shrinkable tubing is applied over the connector barrels.
Due to their robust construction and braided shielding, the EPI series cables tend to be least
flexible of our many instrument cables. Therefore, we recommend the EPI series cables for
pedal board to amplifier interfaces, studio applications, or instances where the user is willing
to accept the added stiffness in order to achieve maximum fidelity and tonal response. The
EPI series instrument cables are also available with right angle gold-plated G & H connectors
upon request for an additional fee.
MODEL
EPI-1/3 RR
EPI-1/2 RR
EPI-1
EPI-3
EPI-6
EPI-8
EPI-10
EPI-12
EPI-15
EPI-18
EPI-20
EPI-25
EPI-30
LENGTH
4 IN.
6 IN.
1 FT.
3 FT.
6 FT.
8 FT.
10 FT.
12 FT.
15 FT.
18 FT.
20 FT.
25 FT.
30 FT.
MODEL
CEPI-10
CEPI-12
CEPI-15
CEPI-18
CEPI-20
CEPI-25
CEPI-30
LENGTH
10 FT.
12 FT.
15 FT.
18 FT.
20 FT.
25 FT.
30 FT.
Shown in Freon Neon, also available
in Black Max (Black Ice pattern)
The new CI series cloth jacketed instrument cables offer outstanding audio performance and
esthetics at exceptional price points. All CI series cables incorporate a heavy-duty 20-gauge
center conductor with hand-soldered G & H brand connectors to provide the highest levels of
reliability possible. The tightly braided nylon outer jacket is currently available in ten
different eye-catching colors / patterns.
Standard configuration connectors for the CI series cables are nickel plated barrels and plug
fingers, although we also offer other connector options which include right angle connectors,
black connector barrels with nickel or gold plated plugs, or gold plated plug fingers. As to
maximize the cable’s visual appeal, we have developed a set of recommended connector
configurations which we deem to be the “Standard configuration” for each of the different
cloth patterns. A listing of the recommended connector configurations and the pattern codes,
used to specify the desired jacket pattern when ordering, are listed below.
PATTERN
Voluptuous Violet
Blueberry Thrill
Quantum Quake
Mean Green
Acid Redhead
Black Jack
Orange Krush
Classic Tweed
Gold Rush
CODE MODEL #
.VV
.BT
.QQ
.MG
.AR
.KJ
.OK
.CT
.GR
CI-10.VV
CI-10.BT
CI-10.QQ
CI-10.MG
CI-10.AR
CI-10.KJ
CI-10.OK
CI-10.CT
CI-10.GR
Connector options for CI series cables.
Right angle plug with nickel barrel, add R after cable length.
Gold plated right angle plug (nickel barrel), add GR after cable length.
Gold plated straight plug (nickel barrel), add G after cable length.
Black barrel with nickel plug, add K after cable length.
Gold plated plug with black barrel, add KG after cable length.
Quiet plug (nickel barrel), add Q after cable length.
Gold plated quiet plug (nickel barrel), add GQ after cable length.
Right angle quiet plug (nickel barrel), add QR after cable length.
Outer heat shrink over connector barrel (although
not recommended for some patterns due to an absence
of coordinating heat shrink colors), add H prefix to series.
Additional charge applies.
Qa
d
uantum
udio
esigns
email at sales@quantumaudiodesigns.com
1.888.545.4404 fax 1.573.545.4411
cloth jacketed instrument cables
CI SERIES
8
cloth jacketed instrument cables
9
CSQI SERIES
The new CSQI series of oxygen-free cloth jacketed instrument cables offer the utmost in
reliability as well as phenomenal audio clarity for those players with a discerning ear. The
CSQI series cables incorporate our oxygen-free, low capacitance Q-2100 cable and handsoldered G & H brand connectors to provide a cable that sets a new standard for cloth
jacketed instrument cables. Available in ten different colors / patterns.
As with all of our Quantum instrument cables, a multitude of connector options are offered
which include nickel or black connector barrels with nickel, or gold plated plugs. As to
maximize the cable’s visual appeal, we have developed a set of recommended connector
configurations which we deem to be the “Standard configuration” for each of the different
cloth patterns. A listing of the recommended connector configurations and the pattern codes,
used to specify the desired pattern when ordering, are listed below.
PATTERN
Pink Cadillac
Black Ice
Terrific Teal
Classic Tweed
Lime Light
Blue Magoo
Blue By-You
Greyful Red
Burgundy Whine
Neon Burst
CODE
.PC
.BI
.TT
.CT
.LL
.BM
.BB
.GR
.BW
.NB
MODEL #
CSQI-10.PC
CSQI-10.BI
CSQI-10.TT
CSQI-10.CT
CSQI-10.LL
CSQI-10.BM
CSQI-10.BB
CSQI-10.GR
CSQI-10.BW
CSQI-10.NB
Individual color
names listed in
order above
Right angle plug with nickel barrel, add R after cable length.
Gold plated right angle plug (nickel barrel), add GR after cable length.
Gold plated straight plug (nickel barrel), add G after cable length.
Black barrel with nickel plug, add K after cable length.
Gold plated plug with black barrel, add KG after cable length.
Quiet plug (nickel barrel), add Q after cable length.
Gold plated quiet plug (nickel barrel), add GQ after cable length.
Right angle quiet plug (nickel barrel), add QR after cable length.
Outer heat shrink over connector barrel (although not
recommended for some patterns due to an absence
of coordinating heat shrink colors), add H prefix to series.
Additional charge applies.
The Up series of Unbalanced Patch cables is designed to provide a quality patch cable for any
situation requiring RCA phono plugs. Available in either RCA to RCA or RCA to ¼”
configurations, the UP series cables can meet your specific requirements. The UP series
assemblies utilize our Q-2000 series single conductor cable with high quality metal barreled
connectors to assure you of a quality connection for years to come. For an additional fee, a
layer of heat shrinkable tubing can be added over the outside of the cable’s connectors to
provide additional strain relief and easy identification of the cable should you choose to
develop a color coding scheme for your particular application. Should you wish to include
the outer heat shrink on the cable, simply specify HUP (instead of UP) as the series when
ordering.
MODEL
UP-1
UP-2
UP-3
UP-6
UP-8
UP-10
UP-12
UP-15
UP-20
UP-25
UP-30
LENGTH
1 FT.
2 FT.
3 FT.
6 FT.
8 FT.
10 FT.
12 FT.
15 FT.
20 FT.
25 FT.
30 FT.
BP SERIES
The Quantum BP series of Balanced Patch Series are designed to provide a truly high quality
cable interface between audio equipment with balanced ¼” inputs. The BP series cables
utilize our oxygen-free Q-3100 wire and heavy duty G & H brand TRS ¼” phone plugs to
provide you with the best performance and reliability possible. Standard configuration for the
BP series cables are ¼” TRS phone plugs at each end. For applications requiring interfaces
between equipment with ¼” TRS connections and those with XLR connections, 3 pin XLR
males or females are available upon request. For those applications, please add either F (for
XLR female) or X (for XLR male) suffix to the model number. For example: BP-25F (1/4”
TRS plug to female XLR) or BP-25X (¼” TRS plug to male XLR). Also available upon
request, gold plated connectors on cable (add G suffix to model number) and outer heat
shrink over ¼” TRS connector barrels (add H prefix to model number). Consult your
Quantum representative for further details and pricing.
MODEL
BP-1
BP-2
BP-3
BP-6
BP-8
BP-10
BP-12
BP-15
BP-20
BP-25
BP-30
BP-50
email at sales@quantumaudiodesigns.com
LENGTH
1 FT.
2 FT.
3 FT.
6 FT.
8 FT.
10 FT.
12 FT.
15 FT.
20 FT.
25 FT.
30 FT.
50 FT.
1.888.545.4404 fax 1.573.545.4411
patch cables
PATCH CABLES
UP SERIES
10
MIDI CABLES
QM SERIES
midi cables
The Quantum QM series MIDI cables are designed to provide an extremely durable 5 pin
active cable assembly for any MIDI patching application. The QM series cables utilize our
Q-3200M series four- conductor oxygen-free cable. This cable offers exceptional
performance when used in applications due to high conductivity oxygen-free copper and the
extremely low overall capacitance achieved through the incorporation of special conductor
insulation materials. The 95% coverage braided shield provides the necessary resistance to
the physical abuse as well as outside RF interference that cables encounter in professional
performance environments. Metal shell din connectors are solder terminated to provide the
best performance possible.
MODEL
QM-1
QM-2
QM-3
QM-5
QM-10
QM-15
QM-10
QM-20
QM-25
QM-30
QM-25
QM-30
LENGTH
1 FT.
2 FT.
3 FT.
5 FT.
10 FT.
15 FT.
10 FT.
20 FT.
25 FT.
30 FT.
25 FT.
30 FT.
Custom lengths available upon request.
IMPEDANCE TRANSFORMER XF CABLE
LTHM SERIES
The LTHM series microphone cables are designed to allow low impedance microphones to
be used with audio equipment having high impedance inputs. To provide this function, the
LTHM cables incorporate the Neutrik brand NP2C-T10AA transformer phone plug which
converts low impedance “balanced line” microphone level signal into a high impedance,
“unbalanced line” signal. Amphenol brand female XLR connectors with nickel finish are
utilized to provide the necessary connection for the microphone. The LTHM series cables
incorporate our Q-3100 series oxygen-free wire as to provide exceptional audio fidelity.
MODEL
Qa
d
uantum
udio
esigns
11
LTHM-1
LTHM-2
LTHM-3
LTHM-6
LTHM-8
LTHM-10
LTHM-15
LTHM-20
LTHM-25
LTHM-30
LTHM-50
LENGTH
1 FT.
2 FT.
3 FT.
6 FT.
8 FT.
10 FT.
15 FT.
20 FT.
25 FT.
30 FT.
50 FT.
The Quantum LM series Low Impedance microphone cables are designed to provide an
extremely reliable, noise-free, balanced line audio cable at a very affordable price. No where
else on the market today can you find a better sounding microphone cable at such a
reasonable price point. Utilizing our Q-3100 series balanced line / mic cable, the LM series
cable provide audio clarity and overall performance that permit it to be utilized with even the
finest of microphones on the market today. Finely stranded, oxygen-free high conductivity
copper is utilized on the individual conductors as to promote audio transmission capabilities
and to minimize unwanted distortion. Conductor insulators are formulated to minimize cable
capacitance in an effort to preserve the high end frequency response and overall audio clarity.
A served bare copper shield with 95% overall coverage provides exceptional protection for
the audio signal against outside interference. LM series cables utilize the heavy duty, hand
soldered, Amphenol brand XLR connectors with the patented “Jaws” strain relief system
which provides exceptional resistance against breakage to the cable at the internal solder
joints in the event of an unexpected jerk to the cable when in use.
Standard LM series cables utilize nickel finish XLR connectors but are also available with
black matte finish connectors for an additional charge. The LM series mic are available in a
variety of colors including black, red, blue, green, yellow, violet, gray and white.
LM series microphone cables are also available with optional on/off switch female XLR
connectors from Neutrik. To specify on/off switch, please use LMS series designation
(instead of LM). For example: LMS-25. Additional charge for on/off switch will apply.
Custom lengths and configurations, which utilize connectors from Switchcraft and Neutrik
are also available upon request.
MODEL
LM-1
LM-2
LM-3
LM-6
LM-8
LM-10
LM-15
LM-20
LM-25
LM-30
LM-50
LM-75
LM-100
LENGTH
1 FT.
2 FT.
3 FT.
6 FT.
8 FT.
10 FT.
15 FT.
20 FT.
25 FT.
30 FT.
50 FT.
75 FT.
100 FT.
LMS SERIES
MODEL
LMS-10
LMS-15
LMS-20
LMS-25
LMS-30
LMS-50
email at sales@quantumaudiodesigns.com
LENGTH
10 FT.
15 FT.
20 FT.
25 FT.
30 FT.
50 FT.
Red,
Gray, Gray,
White,White,
Red, Blue,
Blue,
Violet,
Violet, Green and
Green,Cables
and Yellow
Yellow
1.888.545.4404 fax 1.573.545.4411
m i c ro p h o n e c a b l e s
LOW IMPEDANCE MIC CABLES
LM SERIES
12
SQLM SERIES
m i c ro p h o n e c a b l e s
13
The Quantum SQLM, Studio Quality Low impedance Mic, cable series are designed with the
professional user in mind. The SQLM series combines audio performance as well as the
durability to make this cable ideal for both recording studio environments as well as live
sound touring applications. The SQLM series utilize our Q-3200 cable, which features a four
conductor starquad design of the inner conductors. Through the incorporation of this starquad
design, we can achieve a dramatic improvement in noise reduction capabilities of the
electronic equipment being used with this starquad cable. Each of the four individual
conductors are composed of an extremely fine gauge of oxygen-free high conductivity copper
stranding to provide you with the finest fidelity possible. To help preserve the quality of the
audio signal, conductor insulators are formulated from special compounds, which minimize
cable capacitance. This insulation material produces extremely constant electrical values with
capacitance measurements that are typically 10% to 25% lower than many other four
conductor designs currently offered by other manufacturers. By lowering the overall
capacitance of the cable, the high range frequency response of the audio signal is improved.
To minimize the opportunity for any “tribo-electric noise,” the inner conductors are secured
in their proper locations through the application of a tightly woven 95% braid shield. This
high percentage of shield coverage not only assures you that the audio signal will remain
unaffected in the most adverse of conditions, but also provides exceptional physical strength.
To provide the necessary resistance to physical damage to the cable and prevent any
migration of the shield or movement of the shield when the cable is moved, a thick matte
outer jacket is pressure extruded over the braided shield. The SQLM series cables utilize the
heavy duty, hand soldered, Amphenol brand XLR connectors with the patented “Jaws” strain
relief system and machined contacts. The SQLM series mic are available in a variety of
colors including black, red, blue, green, yellow, violet, gray and white.
All SQLM series cables are available in various custom configurations including connectors
with black matte finish, on/off switches, and right angle female XLR connectors.
Female XLR with on/off switch = SQLMS- + length. For example: SQLMS-25.
Black matte finish XLRs, add K suffix. For example, SQLM-25K.
Black matte finish XLRs with gold contacts, add KG suffix. For example: SQLM-25KG.
Cables requiring right angle XLR female, please add R suffix. For example: SQLM-25R.
MODEL
SQLM-1
SQLM-2
SQLM-3
SQLM-6
SQLM-8
SQLM-10
SQLM-15
SQLM-20
SQLM-25
SQLM-30
SQLM-50
SQLM-75
SQLM-100
LENGTH
1 FT.
2 FT.
3 FT.
6 FT.
8 FT.
10 FT.
15 FT.
20 FT.
25 FT.
30 FT.
50 FT.
75 FT.
100 FT.
Gray, White,
Red,
Blue, Violet,
Green,
and Yellow
Cables
The Quantum HM3, High impedance Microphone cables are designed for use with high
impedance microphones requiring 3 pin XLR connections at the microphone. Standard
wiring configurations are pin 3 hot (tip) and pins 1 and 2 negative (tied to sleeve), the wiring
scheme for the majority of high impedance mics from companies such as Shure Brothers. All
Quantum HM series cables utilize our Q-2000 single conductor audio cable and Amphenol
XLR and G & H ¼” connectors. The model number is formed by HM3-+ length. For
example: HM3-25.
The Quantum HM2, series High impedance Microphone cables are designed for use with
high impedance microphones requiring 3 pin XLR connections at the microphone. Standard
wiring configurations are pin 2 hot (tip) and pins 1 and 3 negative (tied to sleeve), the wiring
scheme for the majority of high impedance mics from companies such as Electro Voice. All
Quantum HM series cables utilize our Q-2000 single conductor audio cable and Amphenol
XLR and G & H ¼” connectors. The model number is formed by HM2- + length. For
example: HM2-25.
MODEL
LENGTH
MODEL
LENGTH
HM3-3
HM3-6
HM3-10
HM3-12
HM3-15
HM3-20
HM3-25
HM3-30
Custom Configuration
microphone cables
available upon
request.
HM2-3
HM2-6
HM2-10
HM2-12
HM2-15
HM2-20
HM2-25
HM2-30
3 FT.
6 FT.
10 FT.
12 FT.
15 FT.
20 FT.
25 FT.
30 FT.
3 FT.
6 FT.
10 FT.
12 FT.
15 FT.
20 FT.
25 FT.
30 FT.
Qa
d
uantum
udio
esigns
email at sales@quantumaudiodesigns.com
1.888.545.4404 fax 1.573.545.4411
m i c ro p h o n e c a b l e s
HM3 and HM2 SERIES
14
“VINTAGE” MIC CABLES
vintage mic cables
15
We offer custom configurations of microphone cables for applications with an assortment of
the most common of the older “vintage” microphones. One of the more common “vintage”
HMF series mic cables utilizes the 2501F Switchcraft brand “screw on” or “bottlecap” type
connector that terminates on the opposite end to a ¼” phone plug. We also offer the W3M
and W4M series vintage mic cables that utilize what we now refer to as the Wire Pro
connectors. These connectors are similar in appearance to a standard XLR connector but has
a locking ring at the top of the connector that screws on to the mating connector on the
microphone to provide a means for locking the two connections together. The W3M is a 3pin connector and the W4M is a 4-pin connector. Since both of these connectors were used
for high impedance and low impedance applications, each can be wired to meet your specific
needs. Please contact your Quantum sales representative for more information concerning the
wiring necessary for your particular microphone’s requirements.
MODEL
HMF-10
HMF-15
HMF-20
HMF-25
HM-10W4M
HM-15WFM
HM-20WFM
HM-25WFM
LM-10W3M
LM-15W3M
LM-20W3M
LM-25W3M
CONNECTORS
“Screw on F” Connectors to ¼” phone plug
“Screw on F” Connectors to ¼” phone plug
“Screw on F” Connectors to ¼” phone plug
“Screw on F” Connectors to ¼” phone plug
LENGTH
10 FT.
15 FT.
20 FT.
25 FT.
4 pin wire pro. Connects to ¼” phone plug
4 pin wire pro. Connects to ¼” phone plug
4 pin wire pro. Connects to ¼” phone plug
4 pin wire pro. Connects to ¼” phone plug
3 pin wire pro. Connects to XLR M
3 pin wire pro. Connects to XLR M
3 pin wire pro. Connects to XLR M
3 pin wire pro. Connects to XLR M
10 FT.
15 FT.
20 FT.
25 FT.
LM-10W4M 4 pin wire pro. Connects to XLR M
LM-15W4M 4 pin wire pro. Connects to XLR M
LM-20W4M 4 pin wire pro. Connects to XLR M
LM-25W4M 4 pin wire pro. Connects to XLR M
*Total number of contacts (3 or 4 pin)
10 FT.
15 FT.
20 FT.
25 FT.
W3M Cable
10 FT.
15 FT.
20 FT.
25 FT.
HMF Cable
“Screw on F”
W4M Cable
email at sales@quantumaudiodesigns.com
1.888.545.4404 fax 1.573.545.4411
The new CLM series of oxygen-free cloth jacketed instrument cables offer superb audio
clarity as well as exceptional reliability. The CLM series cables incorporate our oxygen-free,
low capacitance Q-3100 cable and hand-soldered Amphenol brand connectors to provide a
cable that sets a new standard for cloth jacketed microphone cables. Available in five
different colors and/or patterns including Black Ice, Classic Tweed, Terrific Teal, Burgundy
Whine, and Blue By-you.
The visual appearance of these cables will appeal to even the most discerning eye. As with all
of our Quantum cloth jacketed cables, we have developed a set of recommended connector
configurations which we deem to be the “standard configuration” for each of the different
cloth patterns to further enhance the cable’s visual appeal.
PATTERN
CODE CONNECTORS
MODEL #
Black Ice
.KI
Black barrel
CLM-20K.KI
Classic Tweed
.CT
Nickel barrel
CLM-20.CT
Terrific Teal
.TT
Nickel barrel
CLM-20.TT
Burgundy Whine .BW
Nickel barrel
CLM-20.BW
Blue By-You
.BB
Black barrel
CLM-20B.BB
Colors shown
above
Qa
d
uantum
udio
esigns
email at sales@quantumaudiodesigns.com
1.888.545.4404
fax 1.573.545.4411
cloth jacketed lowZ mic cables
CLM SERIES
16
cloth jacketed highZ mic cables
17
CHM SERIES
The new CHM series of oxygen-free cloth jacketed Hi impedance microphone cables offer
excellent audio clarity as well as exceptional reliability. Depending on the cloth pattern
chosen, the CLM series cables incorporate either our standard CI series wire or our oxygenfree, low capacitance Q-2000 cable. The CSQHM series cables use Q-2100 oxygen-free wire
and hand-soldered Amphenol brand XLR connectors and ¼” phone plugs from G & H to
provide the most reliable connections possible. The visual appearance of these cables is
guaranteed to impress even the musicians with the most discerning tastes. As with all of our
Quantum cloth jacketed cables, we have developed a set of recommended connector
configurations which we deem to be the “standard configuration” for each of the different
cloth patterns to further enhance the cable’s visual appeal. Available in seventeen different
colors and/or patterns.
PATTERN
Voluptuous Violet
Blueberry Thrill
Quantum Quake
Mean Green
Acid Redhead
Black Jack
Orange Krush
Classic Tweed
Gold Rush
CODE
.VV
.BT
.QQ
.MG
.AR
.BJ
.OK
.CT
.GR
MODEL #
CHM#-20.VV
CHM#-20.BT
CHM#-20.QQ
CHM#-20.MG
CHM#-20K.AR
CHM#-20.BJ
CHM#-20.OK
CHM#-20.CT
CHM#-20.GR
PATTERN
Neon Burst
Burgundy Whine
Greyful Red
Blue By-You
Lime Light
Classic Tweed
Terrific Teal
Black Ice
Pink Cadillac
CODE
.NB
.BW
.GR
.BB
.LL
.CT
.TT
.BI
.PC
MODEL #
CSQHM#-20.NB
CSQHM#-20.BW
CSQHM#-20.GR
CSQHM#-20.BB
CSQHM#-20.LL
CSQHM#-20.CT
CSQHM#-20.TT
CSQHM#-20.BI
CSQHM#-20.PC
Colors
shown
as
above.
The Quantum “SY” Specialty Y series cables are designed to address particular interfacing
problems often encountered when a single audio signal must be sent to two separate
locations. To assure you of a quality product, components chosen for each of the particular
models of “SY” cables were selected based on their performance characteristics when
utilized for that particular product’s intended use. For an additional fee, all “SY” cables are
able to have custom imprinted shrink tubing applied to the wire as to provide the user with a
means for easy identification. Due to the many possible combinations of connector
configurations, it is necessary to specify all connectors required when ordering. To do this,
simply use the “SY-“ prefix, followed by the desired overall cable length, and finally,
followed by a three-character code outlining the connectors needed on the Y cable. The
connector codes are as follows:
S= stereo TRS ¼” phone plug
X= male XLR
T= stereo TRS ¼” phone jack
F= female XLR
P= mono ¼” phone plug
C= RCA phono plug
N= mono ¼” phone jack
D= RCA phono jack
A= 3.5mm TRS plug
When applying the above connector codes to the end of the model number, please list the
connector codes alphabetically. An example of the proper model number for a specialty Y
cable, 3 ft. in. length, with one stereo phone plug to two mono ¼” phone plugs would be: SY3PPS. If your particular application required a 10 ft. long cable with one XLR female to two
XLR males, the proper model number would be SY-10FXX. Standard lengths for the “SY’
series cables are 1 ft., 2 ft., 3 ft., 6 ft., and 10 ft. Other custom lengths are available upon
request. Due to limitations of many connectors in regard to their ability to accept maximum
diameters of wire, construction techniques for the various Y cables will vary, depending on
the construction method we deem provides the greatest amount of structural integrity. Unless
specified otherwise, all specialty Y cables are wired pin 2 hot. The following is a listing of
our most popular configurations of Y cables. Due to the number of possible configurations,
you may need to contact your Quantum sales representative to confirm the specifications that
your particular application requires. Please note that all SY series cables are considered
specialty cables that are custom fabricated on a case by case basis, therefore, they are
considered a custom product and are not returnable for factory restocking or eligible for
credit to the ordering dealer’s account.
MODEL
DESCRIPTION
SY-*CCN
¼” MONO JACK TO 2) RCA PHONO PLUGS
SY-*CCP
¼” MONO PLUG TO 2) RCA PHONO PLUGS
SY-*DDP
¼” MONO PLUG TO 2) RCA PHONO JACKS
SY-*NNP
¼” MONO PLUG TO 2) ¼” MONO JACKS
SY-*NPP
¼” MONO JACK TO 2) ¼” MONO PLUGS
SY-*PPP
¼” MONO PLUG TO 2) ¼” MONO PLUGS
SY-*CDD
RCA PHONO PLUG TO 2) RCA PHONO JACKS
SY-*CCD
RCA PHONO JACK TO 2) RCA PHONO PLUGS
SY-*CCS
¼” STEREO TRS PLUG TO 2) RCA PHONO PLUGS
SY-*DDS
¼” STEREO PLUG TO 2) RCA PHONO JACKS
SY-*NNS
¼” STEREO TRS PLUG TO 2) ¼” MONO JACKS
SY-*PPS
¼” STEREO TRS PLUG TO 2) ¼” MONO PLUGS
SY-*STT
¼” STEREO TRS PLUG TO 2) ¼” STEREO TRS JACKS
SY-*SXX
¼” STEREO TRS PLUG TO 2) XLR MALES
SY-*FXX
XLR FEMALE TO 2) XLR MALES
SY-*FFX
XLR MALE TO 2) XLR FEMALES
CUSTOM CONFIGURATIONS AVAILABLE
*Denotes overall length of cable assembly. Standard lengths for Y cables are 1, 2, 3, 6, or 10 ft. Fanout
spread of Y section of cable is generally 1 ft. on cable lengths of 1, 2, & 3 ft. assemblies and 2 ft. fanout
length on 6 & 10 ft. long assemblies. If greater fanout spread is required, consult your Quantum sales
representative as to determine the construction techniques that will best suit your particular requirements.
adapter cables
SPECIALTY “Y” ADAPTER CABLES
SY SERIES CABLES
18
SC SERIES
speaker cables
19
Our SC series of Speaker Cables offers four different gauges of cable to allow you to choose
the most fitted for your particular application. Available gauges range from 18 gauge cable,
suitable for lower power applications requiring short runs of cable from amplifier to speaker
enclosure, to our heavy duty 12 gauge speaker cable, designed to handle the higher power
conditions found in many of today’s professional sound reinforcement applications. Although
each of the different models of cable can vary slightly in their internal construction, each has
been designed to provide the maximum amount of fidelity possible.
Inner conductors in all SC series cables utilize finely stranded, oxygen-free, high
conductivity copper to provide the best signal transmission qualities possible. The stranding
utilized in the inner conductors of our SC series cable is typically much finer than that used
by most of our competitors, with the total number of strands within the conductor generally
numbering over twice the amount found in other brands. Although the cost of this type of
stranding is considerably greater than that of the stranding found in other brands, it offers
multiple benefits to the user. First, by increasing the total number of strands within the
conductor, we take advantage of what is known as the “skin effect.” The “skin effect” refers
to the fact that the higher frequencies of audio signals typically travel on the outside of the
strands within the conductors. By, utilizing more strands within the individual conductors,
the overall fidelity of the cable is improved. Another very noticeable benefit to the finer
stranding is that the mechanical flexibility of the cable is improved.
To take advantage of the more flexible conductor, the jacketing material chosen for the SC
series cables is constructed from specially formulated compounds that offer exceptional
flexibility while offering the durability required of a professional quality speaker cable.
To assure optimum transmission of the audio signal as well as maximum durability, the SC
series cables are terminated with G & H brand phone plugs. All SC series cables are also
available with optional MDP plugs should your application require them.
As an option, we also offer all SC series speaker cables with Neutrik brand“Speakon”
connectors. Due to SC series speaker cables utilizing two conductor wires, please make
certain that your application does not call for two discrete channels of speaker level
information (BI-amp applications). If this is the case, please refer to our multi-channel
NSSC4 series cables.
See individual model number and length charts on the next page.
Qa
d
uantum
udio
esigns
email at sales@quantumaudiodesigns.com
1.888.545.4404
fax 1.573.545.4411
SC SERIES
SC18-3
SC18-6
SC18-10
SC18-12
SC18-15
SC18-20
SC18-25
SC18-30
** SC18-50
3FT.
6 FT.
10 FT.
12 FT.
15 FT.
20 FT.
25 FT.
30 FT.
50 FT.
14 GAUGE CABLES
MODEL
LENGTH
SC14-3
SC14-6
SC14-10
SC14-12
SC14-15
SC14-20
SC14-25
SC14-30
SC14-50
SC14-75
**SC14-100
3 FT.
6 FT.
10 FT.
12 FT.
15 FT.
20 FT.
25 FT.
30 FT.
50 FT.
75 FT.
100 FT.
16 GAUGE CABLES
MODEL
LENGTH
SC16-3
SC16-6
SC16-10
SC16-12
SC16-15
SC16-20
SC16-25
SC16-30
SC16-50
** SC16-75
SC16-100
3 FT.
6 FT.
10 FT.
12 FT.
15 FT.
20 FT.
25 FT.
30 FT.
50 FT.
75 FT.
100 FT.
12 GAUGE CABLES
MODEL
LENGTH
SC12-3
SC12-6
SC12-10
SC12-15
SC12-20
SC12-25
SC12-30
SC12-50
SC12-75
SC12-100
3 FT.
6 FT.
10 FT.
15 FT.
20 FT.
25 FT.
30 FT.
50 FT.
75 FT.
100 FT.
12
GAUGE
14
GAUGE
16
GAUGE
For MDP plug terminations, please add M suffix to the model number for each MDP
plug required. Example: model SC18-25M (MDP on one end) or SC18-25MM (MDP
on both ends). For cables with four conductor Neutrik Speakon connectors, please add
NS suffix to model number. Example: SC14-50NS. If Speakon connectors are
required for both ends of cable, add NSNS suffix. Example: SC14-50NSNS. ** added
to lengths that are “borderline” of considering a heavier gauge wire.
CUSTOM LENGTHS ARE AVAILABLE UPON REQUEST.
speaker cables
18 GAUGE CABLES
MODEL
LENGTH
20
MULTI-CHANNEL SPEAKER CABLES
NSSC4 SERIES
speaker cables
21
The Quantum NSSC4 Neutrik Speakon Speaker Cable series is designed to accommodate
amplifier to speaker and speaker to speaker applications on units utilizing the Neutrik brand
four conductor “Speakon” series connectors. The NSSC4 series cables utilize our Q-4400
series multi-conductor speaker cable. The individual conductors are composed of extremely
fine strands of oxygen-free high conductivity copper to provide the best fidelity and physical
flexibility possible. The overall flexibility of the cable is enhanced through the use of
conductor insulation materials, which provide extremely low durometer ratings while still
offering excellent sonic performance. A heavy duty black matte outer jacket provides the
durability required of a professional duty cable while also maintaining excellent overall
flexibility. We offer the NSSC4 series cables in both 14 gauge and 12 gauge versions, in
standard lengths from 3 feet to 100 feet. Should your application require the cable to “breakout” at either end to ¼” phone plugs, this can be done for an additional fee and by simply
adding a “P” suffix to the end of the cable’s model number.
12 GAUGE CABLES
MODEL #
LENGTH
NSSC412-3
3 FT.
NSSC412-6
6 FT.
NSSC412-10
10 FT.
NSSC412-20
20 FT.
NSSC412-25
25 FT.
NSSC412-30
30 FT.
NSSC412-50
50 FT.
NSSC412-75
75 FT.
NSSC412-100
100 FT.
14 GAUGE CABLES
MODEL #
LENGTH
NSSC414-3
3 FT.
NSSC414-6
6 FT.
NSSC414-10
10 FT.
NSSC414-20
20 FT.
NSSC414-25
25 FT.
NSSC414-30
30 FT.
NSSC414-50
50 FT.
NSSC414-75
75 FT.
NSSC414-100
100 FT.
email at sales@quantumaudiodesigns.com
1.888.545.4404 fax 1.573.545.4411
The Quantum NSSC8 Neutrik Speakon Speaker Cable series is designed to accommodate
amplifier to speaker and speaker to speaker applications on units utilizing the Neutrik brand
eight-conductor NL8FC speakon connectors. The NSSC8 series cables utilize our Q-481214
series multi-conductor speaker cable. This cable utilizes four conductors of a 12-gauge
OFHC copper and four conductors of 14 gauge OFHC copper. This cable design incorporates
individual conductor strand counts that have been specifically chosen to optimize the
coupling response between amplifier and speaker, as well as to achieve the audio clarity and
tonal balance possible. The overall flexibility of the cable is enhanced through the use of
conductor insulation materials, which provide extremely low durometer ratings while still
offering excellent sonic performance. A heavy duty black matte outer jacket provides the
durability required of a professional duty cable while also maintaining excellent overall
flexibility. We offer the NSSC8 series cables in lengths from 3 feet to 100 feet.
NSSC8 CABLES
MODEL #
LENGTH
NSSC8-3
3 FT.
NSSC8-6
6 FT.
NSSC8-10
10 FT.
NSSC8-20
20 FT.
NSSC8-25
25 FT.
NSSC8-30
30 FT.
NSSC8-50
50 FT.
NSSC8-75
75 FT.
NSSC8-100
100 FT.
Qa
d
uantum
udio
speaker cables
MULTI-CHANNEL SPEAKER CABLES
NSSC8 SERIES
esigns
22
PERFORMER SERIES AUDIO SNAKES
performer audio snakes
23
The Quantum PAS, Performer Audio Snake, series was designed with the professional user in mind.
The low-profile stage boxes are fabricated from heavy gauge steel to provide the durability required in
a professional duty, audio snake assembly. A die cast handle provides a means of safely handling the
cable. Large non-skid rubber feet are bolted to the base of the unit to prevent the unwanted movement
of the stage box during use. Heavy-duty metal cable grips are incorporated to provide the utmost strain
relief, while being extremely resistant to breakage. The Amphenol brand XLR connectors have metal
housings rather than plastic, which resist breakage as well as assure you that the audio signal will
remain fully shielded. All male XLR connectors utilize pin contacts that are a solid “machined”
contact in an effort to provide the greatest durability level possible. To provide you with the best audio
performance possible and most reliable connections, all connectors on the PAS are hand soldered.
The Q-5100 series multi-pair cable used in the PAS is designed to provide optimum audio
performance over long cable runs. All materials utilized in the cable design, as well as the
construction techniques utilized in the manufacturing process, were chosen to provide the best sonic
performance and physical characteristics possible in an audio snake. To provide the best audio path
possible, the Q-5100 series multi-pair cable utilizes finely stranded oxygen-free high conductivity,
bare copper conductors. The benefits of this design are numerous. First, the use of the higher purity
oxygen-free copper provides a superior signal path over the copper typically utilized in many audio
snakes. Secondly, by utilizing more finely stranded conductors in our snake cable, we are able to
improve the ability of the cable to transmit higher frequency information. Another definite advantage
to the finer stranding is that the overall flexibility of the cable is improved.
The insulation material utilized on the individual conductors has been chosen due to its superior
electrical characteristics. This insulation material produces extremely low capacitance figures, which
typically measure slightly more than half if the capacitance found in other audio snakes. Since cable
capacitance adversely affects the high frequency regions of an audio signal, the utilization of this
insulation compound provides superior audio performance over other insulation materials.
To preserve the integrity of the audio signal, each channel in the cable is individually shielded with a
100% coverage aluminum foil tape. A “foil-free” edge design provides isolation between the shields
of individual channels. The foil utilized in the cable is of a special design to minimize the possibility
for transmitting mechanically induced noise.
The outer jacket of the Q-5100 series audio cable is designed to provide maximum protection against
cuts and tears due to the environment audio snakes typically encounter. The special compounds used
in formulating the jacket material were chosen due to their tendency to produce an extremely flexible
outer jacket while also offering the necessary resistance to cuts and tears.
Fanouts on the PAS are color-coded within groups for ease of identification during connection.
Individual audio channels are clearly identified during connection. Individual audio channels are
clearly identified with imprinted shrink tubing. Metal cable bales are provided at the fanout to provide
suitable strain relief for the audio snake while in use.
Performer series snakes are available with either XLR, or balanced ¼” returns. For an optional charge,
both XLR and balanced ¼” connections for each return channel can be placed on the stage box with
the ¼” returns wired to the parallel with the XLR males.
Available models of performer series audio snakes are listed on the following page
MODEL
PAS8X0*-25
PAS8X0*-50
PAS8X0*-75
PAS8X0*-100
PAS8X0*-125
PAS8X0*-150
PAS8X4*-75
PAS8X4*-100
PAS8X4*-125
PAS8X4*-150
PAS12X0*M-25
PAS12X0*M-50
PAS12X0*M-75
PAS12X0*M-100
PAS12X0*M-125
PAS12X0*M-150
PAS12X4*-75
PAS12X4*-100
PAS12X4*-125
PAS12X4*-150
PAS16X0*-25
PAS16X0*-50
PAS16X0*-100
PAS16X0*-125
PAS16X0*-150
PAS16X4*-75
PAS16X4*-100
PAS16X4*-125
PAS16X4*-150
PAS24X0*-75
PAS24X0*-100
PAS24X0*-125
PAS24X0*-150
PAS24X4*-75
PAS24X4*-100
PAS24X4*-125
PAS24X4*-150
PAS24X8*-75
PAS24X8*-100
PAS24X8*-125
PAS24X8*-150
PAS32X0*M-75
PAS32X0*M-100
PAS32X0*M-125
PAS32X0*M-150
PAS32X8*-75
PAS32X8*-100
PAS32X8*-125
PAS32X8*-150
CONFIGURATION LENGTH
8 MIC, 0 RETURN
25 FT.
8 MIC, 0 RETURN
50 FT.
8 MIC, 0 RETURN
75 FT.
8 MIC, 0 RETURN
100 FT.
8 MIC, 0 RETURN
125 FT.
8 MIC, 0 RETURN
150 FT.
8 MIC, 4 RETURN
75 FT.
8 MIC, 4 RETURN
100 FT.
8 MIC, 4 RETURN
125 FT.
8 MIC, 4 RETURN
150 FT.
12 MIC, 0 RETURN 25 FT.
12 MIC, 0 RETURN 50 FT.
12 MIC, 0 RETURN 75 FT.
12 MIC, 0 RETURN 100 FT.
12 MIC, 0 RETURN 125 FT.
12 MIC, 0 RETURN 150 FT.
12 MIC, 4 RETURN 75 FT.
12 MIC, 4 RETURN 100 FT.
12 MIC, 4 RETURN 125 FT.
12 MIC, 4 RETURN 150 FT.
16 MIC, 0 RETURN 25 FT.
16 MIC, 0 RETURN 50 FT.
16 MIC, 0 RETURN 100 FT.
16 MIC, 0 RETURN 125 FT.
16 MIC, 0 RETURN 150 FT.
16 MIC, 4 RETURN 75 FT.
16 MIC, 4 RETURN 100 FT.
16 MIC, 4 RETURN 125 FT.
16 MIC, 4 RETURN 150 FT.
24 MIC, 0 RETURN 75 FT.
24 MIC, 0 RETURN 100 FT.
24 MIC, 0 RETURN 125 FT.
24 MIC, 0 RETURN 150 FT.
24 MIC, 4 RETURN 75 FT.
24 MIC, 4 RETURN 100 FT.
24 MIC, 4 RETURN 125 FT.
24 MIC, 4 RETURN 150 FT.
24 MIC, 8 RETURN 75 FT.
24 MIC, 8 RETURN 100 FT.
24 MIC, 8 RETURN 125 FT.
24 MIC, 8 RETURN 150 FT.
32 MIC, 0 RETURN 75 FT.
32 MIC, 0 RETURN 100 FT.
32 MIC, 0 RETURN 125 FT.
32 MIC, 0 RETURN 150 FT.
32 MIC, 8 RETURN 75 FT.
32 MIC, 8 RETURN 100 FT.
32 MIC, 8 RETURN 125 FT.
32 MIC, 8 RETURN 150 FT.
PAS40X0*-100
PAS40X0*-125
PAS40X0*-150
PAS40X8*-100
PAS40X8*-125
PAS40X8*-150
PAS48X0*M-100
PAS48X0*M-125
PAS48X0*M-150
40 MIC, 0 RETURN
40 MIC, 0 RETURN
40 MIC, 0 RETURN
40 MIC, 8 RETURN
40 MIC, 8 RETURN
40 MIC, 8 RETURN
48 MIC, 0 RETURN
48 MIC, 0 RETURN
48 MIC, 0 RETURN
100 FT.
125 FT.
150 FT.
100 FT.
125 FT.
150 FT.
100 FT.
125 FT.
150 FT.
*Denotes type of returns
M=All Mic (XLR F on Box, XLR M on fanout)
X=XLR on box and fanout
DRS= Dual returns (both XLR and 1/4” Stereo)
on box with 1/4” TRS plugs on fanout
DRX= Dual returns (both XLR and 1/4”
Stereo on box with XLR females on fanout)
PAS are also available with Switchcraft
or Neutrik brand connectors upon request.
To specify Switchcraft brand connectors, please
add SWsuffix to model number. Should you
require Neutrik brand connectors, please add
NE suffix to model number. For example:
PAS24XS-100SW or PAS24X4S-100NE.
Additional fees will apply to audio snakes that
require either Switchcraft or Neutrik
brand connectors.
CUSTOM LENGTHS AVAILABLE
UPON REQUEST.
email at sales@quantumaudiodesigns.com
1.888.545.4404
fax 1.573.545.4411
performer audio snakes
PERFORMER SERIES AUDIO SNAKES
24
PERFORMER SERIES MULTI-TRACK CABLES
multi-channel audio
25
Our “Performer” Multi-Track series of audio cables are designed for applications requiring
multiple channels of line and/ or microphone level signals to be transmitted within the same
cable. Ideal for recording studios, broadcast facilities, and live sound reinforcement
situations, the “Performer Multi-Tracks can be configured to your exact specifications. To
assure you of the best audio performance possible, we utilize our Q-5100 series low
capacitance, oxygen-free, multi-conductor cable. To provide a positive, long lasting
connection, the “Performer” series Multi-Tracks are terminated with G & H and Amphenol
brand connectors. As an option, we also offer the “Performer” series Multi-Track cables with
gold-plated RCA phono, unbalanced ¼” phone plugs, and XLR connectors. The following is
a list of our standard configuration “Performer” Multi-Track series cables:
4 CHANNEL MULTI-TRACKS
MODEL #
PMT4-10CC
PMT4-15CC
PMT4-20CC
PMT4-25CC
PMT4-10CP
PMT4-15CP
PMT4-20CP
PMT4-25CP
PMT4-10PP
PMT4-15PP
LENGTH
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
CONNECTORS
RCA MALE TO RCA MALE
RCA MALE TO RCA MALE
RCA MALE TO RCA MALE
RCA MALE TO RCA MALE
RCA MALE TO ¼” MALE
RCA MALE TO ¼” MALE
RCA MALE TO ¼” MALE
RCA MALE TO ¼” MALE
¼” MALE TO ¼” MALE
¼” MALE TO ¼” MALE
MODEL #
PMT4-20PP
PMT4-25PP
PMT4-10FM
PMT4-15FM
PMT4-20FM
PMT4-25FM
PMT4-10SS
PMT4-15SS
PMT4-20SS
PMT4-25SS
LENGTH
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
CONNECTORS
¼” MALE TO ¼” MALE
¼” MALE TO ¼” MALE
XLR F TO XLR M
XLR F TO XLR M
XLR F TO XLR M
XLR F TO XLR M
TRS MALE TO TRS MALE
TRS MALE TO TRS MALE
TRS MALE TO TRS MALE
TRS MALE TO TRS MALE
8 CHANNEL MULTI-TRACKS
MODEL #
PMT8-10CC
PMT8-15CC
PMT8-20CC
PMT8-25CC
PMT8-10CP
PMT8-15CP
PMT8-20CP
PMT8-25CP
PMT8-10PP
PMT8-15PP
LENGTH
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
CONNECTORS
RCA MALE TO RCA MALE
RCA MALE TO RCA MALE
RCA MALE TO RCA MALE
RCA MALE TO RCA MALE
RCA MALE TO ¼” MALE
RCA MALE TO ¼” MALE
RCA MALE TO ¼” MALE
RCA MALE TO ¼” MALE
¼” MALE TO ¼” MALE
¼” MALE TO ¼” MALE
MODEL #
PMT8-20PP
PMT8-25PP
PMT8-10FM
PMT8-15FM
PMT8-20FM
PMT8-25FM
PMT8-10SS
PMT8-15SS
PMT8-20SS
PMT8-25SS
LENGTH
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
CONNECTORS
¼” MALE TO ¼” MALE
¼” MALE TO ¼” MALE
XLR F TO XLR M
XLR F TO XLR M
XLR F TO XLR M
XLR F TO XLR M
TRS MALE TO TRS MALE
TRS MALE TO TRS MALE
TRS MALE TO TRS MALE
TRS MALE TO TRS MALE
See more individual models,
length and connectors
on next page.
Qa
d
uantum
udio
esigns
email at sales@quantumaudiodesigns.com
1.888.545.4404
fax 1.573.545.4411
PERFORMER SERIES MULTI-TRACK CABLES
PMT12-10CC
PMT12-15CC
PMT12-20CC
PMT12-25CC
PMT12-10CP
PMT12-15CP
PMT12-20CP
PMT12-25CP
PMT12-10PP
PMT12-15PP
PMT12-20PP
PMT12-25PP
PMT12-10FM
PMT12-15FM
PMT12-20FM
PMT12-25FM
PMT12-10SS
PMT12-15SS
PMT12-20SS
PMT12-25SS
PMT12-10SF
PMT12-15SF
PMT12-20SF
PMT12-25SF
PMT12-10SM
PMT12-15SM
PMT12-20SM
PMT12-25SM
LENGTH
10FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
CONNECTORS
RCA MALE TO RCA MALE
RCA MALE TO RCA MALE
RCA MALE TO RCA MALE
RCA MALE TO RCA MALE
RCA MALE TO ¼” MALE
RCA MALE TO ¼” MALE
RCA MALE TO ¼” MALE
RCA MALE TO ¼” MALE
¼” MALE TO ¼” MALE
¼” MALE TO ¼” MALE
¼” MALE TO ¼” MALE
¼” MALE TO ¼” MALE
XLR F TO XLR M
XLR F TO XLR M
XLR F TO XLR M
XLR F TO XLR M
TRS MALE TO TRS MALE
TRS MALE TO TRS MALE
TRS MALE TO TRS MALE
TRS MALE TO TRS MALE
¼” TRS TO XLR F
¼” TRS TO XLR F
¼” TRS TO XLR F
¼” TRS TO XLR F
¼” TRS TO XLR M
¼” TRS TO XLR M
¼” TRS TO XLR M
¼” TRS TO XLR M
24 CHANNEL MULTI-TRACKS
MODEL#
PMT24-10CC
PMT24-15CC
PMT24-20CC
PMT24-25CC
PMT24-10CP
PMT24-15CP
PMT24-20CP
PMT24-25CP
PMT24-10PP
PMT24-15PP
PMT24-20PP
PMT24-25PP
PMT24-10FM
PMT24-15FM
PMT24-20FM
PMT24-25FM
PMT24-10SS
PMT24-15SS
PMT24-20SS
PMT24-25SS
PMT24-10SF
PMT24-15SF
PMT24-20SF
PMT24-25SF
PMT24-10SM
PMT24-15SM
PMT24-20SM
PMT24-25SM
LENGTH
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
CONNECTORS
RCA MALE TO RCA MALE
RCA MALE TO RCA MALE
RCA MALE TO RCA MALE
RCA MALE TO RCA MALE
RCA MALE TO ¼” MALE
RCA MALE TO ¼” MALE
RCA MALE TO ¼” MALE
RCA MALE TO ¼” MALE
¼” MALE TO ¼” MALE
¼” MALE TO ¼” MALE
¼” MALE TO ¼” MALE
¼” MALE TO ¼: MALE
XLR F TO XLR M
XLR F TO XLR M
XLR F TO XLR M
XLR F TO XLR M
TRS MALE TO TRS MALE
TRS MALE TO TRS MALE
TRS MALE TO TRS MALE
TRS MALE TO TRS MALE
¼” TRS TO XLR F
¼” TRS TO XLR F
¼”TRS TO XLR F
¼”TRS TO XLR F
¼”TRS TO XLR M
¼”TRS TO XLR M
¼”TRS TO XLR M
¼”TRS TO XLR M
16 CHANNEL MULTI-TRACKS
MODEL#
PMT16-10CC
PMT16-15CC
PMT16-20CC
PMT16-25CC
PMT16-10CP
PMT16-15CP
PMT16-20CP
PMT16-25CP
PMT16-10PP
PMT16-15PP
PMT16-20PP
PMT16-25PP
PMT16-10FM
PMT16-15FM
PMT16-20FM
PMT16-25FM
PMT16-10SS
PMT16-15SS
PMT16-20SS
PMT16-25SS
PMT16-10SF
PMT16-15SF
PMT16-20SF
PMT16-25SF
PMT16-10SM
PMT16-15SM
PMT16-20SM
PMT16-25SM
LENGTH
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
CONNECTORS
RCA MALE TO RCA MALE
RCA MALE TO RCA MALE
RCA MALE TO RCA MALE
RCA MALE TO RCA MALE
RCA MALE TO ¼” MALE
RCA MALE TO ¼” MALE
RCA MALE TO ¼” MALE
RCA MALE TO ¼” MALE
¼” MALE TO ¼” MALE
¼” MALE TO ¼” MALE
¼” MALE TO ¼” MALE
¼” MALE TO ¼” MALE
XLR F TO XLR M
XLR F TO XLR M
XLR F TO XLR M
XLR F TO XLR M
TRS MALE TO TRS MALE
TRS MALE TO TRS MALE
TRS MALE TO TRS MALE
TRS MALE TO TRS MALE
¼” TRS TO XLR F
¼” TRS TO XLR F
¼” TRS TO XLR F
¼” TRS TO XLR F
¼” TRS TO XLR M
¼” TRS TO XLR M
¼” TRS TO XLR M
¼” TRS TO XLR M
32 CHANNEL MULTI-TRACKS
MODEL # LENGTH
PMT32-10CC
PMT32-15CC
PMT32-20CC
PMT32-25CC
PMT32-10CP
PMT32-15CP
PMT32-20CP
PMT32-25CP
PMT32-10PP
PMT32-15PP
PMT32-20PP
PMT32-25PP
PMT32-10FM
PMT32-15FM
PMT32-20FM
PMT32-25FM
PMT32-10SS
PMT32-15SS
PMT32-20SS
PMT32-25SS
PMT32-10SF
PMT32-15SF
PMT32-20SF
PMT32-25SF
PMT32-10SM
PMT32-15SM
PMT32-20SM
PMT32-25SM
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
10 FT.
15 FT.
20 FT.
25 FT.
CONNECTORS
RCA MALE TO RCA MALE
RCA MALE TO RCA MALE
RCA MALE TO RCA MALE
RCA MALE TO RCA MALE
RCA MALE TO ¼” MALE
RCA MALE TO ¼” MALE
RCA MALE TO ¼” MALE
RCA MALE TO ¼” MALE
¼” MALE TO ¼” MALE
¼” MALE TO ¼” MALE
¼” MALE TO ¼” MALE
¼” MALE TO ¼” MALE
XLR F TO XLR M
XLR F TO XLR M
XLR F TO XLR M
XLR F TO XLR M
TRS MALE TO TRS MALE
TRS MALE TO TRS MALE
TRS MALE TO TRS MALE
TRS MALE TO TRS MALE
¼” TRS TO XLR F
¼” TRS TO XLR F
¼” TRS TO XLR F
¼” TRS TO XLR F
¼” TRS TO XLR M
¼” TRS TO XLR M
¼” TRS TO XLR M
¼” TRS TO XLR M
multi-channel audio
12 CHANNEL MULTI-TRACKS
MODEL #
26
GIGLINE SNAKES
audio snakes
27
Designed to meet the needs of aspiring musicians or the occasional weekend warrior musical
reunion , the Gig Lines series of audio snakes offer great performance at extremely
affordable price points. All Gig Lines audio snakes incorporate heavy duty steel stageboxes
with non-skid rubber feet, high performance / low capacitance cabling, metal shelled cable
mount xlr fanout connectors, and color coded fanouts. Targeted to be a lower cost alternative
to our more professional duty Performer series audio snakes, the Gig Line series audio snakes
offer exceptional fidelity and durability. All Gig Lines series stageboxes include xlr
microphone inputs and balanced ¼” connectors for all return channels, although fanout
connectors for those returns channels can be specified with either balanced ¼” phone plugs
or xlr females for no additional fee. Standard configurations and cable lengths for Gig Lines
are listed below.
MODEL
8X4*-50
8X4*-75
8X4*-100
12X4*-50
12X4*-75
12X4*-100
16X4*-50
16X4*-75
16X4*-100
24X4*-50
24X4*-75
24X4*-100
CONFIGURATION
8 MIC, 4 RETURN
8 MIC, 4 RETURN
8 MIC, 4 RETURN
12 MIC, 4 RETURN
12 MIC, 4 RETURN
12 MIC, 4 RETURN
16 MIC, 4 RETURN
16 MIC, 4 RETURN
16 MIC, 4 RETURN
24 MIC, 4 RETURN
24 MIC, 4 RETURN
24 MIC, 4 RETURN
LENGTH
50 FT.
75 FT.
100 FT.
50 FT.
75 FT.
100 FT.
50 FT.
75 FT.
100 FT.
50 FT.
75 FT.
100 FT.
Qa
d
uantum
udio
esigns
email at sales@quantumaudiodesigns.com
1.888.545.4404
fax 1.573.545.4411
Designed to accommodate those sound reinforcement applications where the sound engineer
prefers to locate their mixing console (a mixer with internal power amplifiers) some distance
from the performance stage and still be able to neatly deliver the mixer’s speaker level signal
back to the stage area. In even the most demanding of applications, the Quantum GPS series
audio snakes will surpass even the most stringent requirements.
In addition to incorporating the same state of the art materials and designs in their overall
construction as our Quantum PAS series audio snakes, the GPS series “Power Snakes”
incorporate two additional internal speaker lines into the cable. This permits the user to
receive microphone level signals from the stagebox and to send speaker level and line level
signals from the mixing console back to the stagebox within the same cable. As is with all of
our more expensive Performer series snakes, the GPS audio snakes utilize the same oxygenfree copper conductors and low capacitance insulation materials as is used on our low
impedance microphone cables.
Available configurations of GPS series power snakes include 8 and 12 mic input versions, with both
including 2 unbalanced 1/4” line level returns, and 2 discrete 14 gauge speaker lines. It should be
noted that at the stagebox end of the snake, each speaker line is wired to a pair of 1/4” output
connectors. For optimum performance, maximum recommended length on any configuration of
power snake is 100 feet. Standard length GPS series assemblies are listed below.
MODEL
GPS8X2X2*-50
GPS8X2X2*-75
GPS8X2X2*-100
GPS12X2X2*-50
GPS12X2X2*-75
GPS12X2X2*-100
CONFIGURATION
8 MIC, 2 RETURN, 2 OUT
8 MIC, 2 RETURN, 2 OUT
8 MIC, 2 RETURN, 2 OUT
12 MIC, 2 RETURN, 2 OUT
12 MIC, 2 RETURN, 2 OUT
12 MIC, 2 RETURN, 2 OUT
LENGTH
50 FT.
75 FT.
100 FT.
50 FT.
75 FT.
100 FT.
*Denotes type of returns
P suffix = ¼” unbalanced returns (this is standard configuration for GPS snakes)
S suffix = ¼” balanced returns (available upon special request for an extra fee)
X suffix = XLR female at fanout, ¼” balanced connector on box (available upon
special request for an extra fee)
audio snakes
POWER SNAKES
28
matchmaker direct box
29
MDB-101 “MATCHMAKER” DIRECT BOX
The MDB-101 Matchmaker Direct Box is engineered to provide excellent audio performance
in a durable and cost effective package. The Matchmaker provides guitarists, bassists, and
keyboardists a means of producing a high fidelity, low impedance microphone level audio
feed simultaneously to a mixing console, while providing the original high impedance,
unbalanced signal to the onstage amplification utilized in most performing environments. The
Matchmaker is designed to accept either an instrument level signal directly from the
instrument, a line level signal from the output of an effective devise or amplifier pre am
section, or a speaker level signal from the speaker output jack of an instrument amplifier. The
Matchmaker Direct Box also incorporates a special “cabinet emulation” feature allowing the
musician to more closely duplicate the onstage amplifications’ tonal qualities in the
additional audio feed when a “ground loop” is encountered between the onstage amplification
and the audio equipment being fed from the balanced output of the MDB-101, a ground lift
switch is provided.
Qa
d
uantum
udio
esigns
email at sales@quantumaudiodesigns.com
1.888.545.4404 fax 1.573.545.4411
SAB SERIES SPEAKON ADAPTER BOXES
The most basic of the SAB boxes, the SAB-202, allows you to feed two speaker cabinets
with 2 pole Speakon connections from a single 2 pole Speakon input.
For those applications when you need to convert a normal ¼” phone plug to 2 pole speakon
outputs, or vice versa, we offer the SAB-Q02. This unit provides one locking ¼” phone jack
input wired in parallel to two NL2MP Speakon outputs. Due to this parallel wiring scheme
any of the three connectors can actually be used as the “input” into the adapter box, thereby
making it possible to use the ¼” phone jack as an output rather than an input.
We also offer the SBA-404, which is a 4-pole version, which also provides two identical
speakon output connectors from single 4-pole speakon input. Although the SBA-404 accepts
the 4 pole NL4FC connectors, it can also be used with the 2 pole NL2FC connectors as well,
which will provide audio signal from the 1+, 1- terminals of the NL4MP input connector.
In the event your application incorporates a BI-amplified signal that requires the use of both
Speakons and ¼” phone jacks, we offer the SAB-402Q. This unit incorporates one NL4MP
connector wired to two ¼” phone jacks. Each of these ¼” phone jacks are fed separately from
a pair of the 4 available poles of the NL4MP connector. One of the ¼” jacks is fed from the
1+, 1- poles and the other ¼” jack is fed from the 2+, 2- poles. Due to the wiring scheme
used, this Speakon adapter box can either be used to feed a Speakon output from the two
discrete ¼” phone jacks, or to feed two ¼” outputs from a single Speakon input.
SAB-Q02
input side
OUTPUT
SAB-202
output side
OUTPUT
SAB SERIES
SPEAKON ADAPTER
adapter boxes
Finally, a reliable way to provide multiple speaker level signals from a single speaker level
source. The SAB series adapter boxes allow the user a variety of options when dealing with
Speakon style connectors.
INPUT
email at quantumaudiodesigns.com
1.888.545.4404
fax 1.573.545.4411
30
FLOOR POCKET STAGE BOXES
recessed stageboxes
31
Designed for those permanent installation applications that require the audio/video
connection points to be located in convenient, yet unobtrusive locations, the Quantum line of
recessed floor pocket stageboxes will meet your needs. We offer three basic models of floor
pocket stageboxes, with each model having the ability to house a connector mounting plate
which can be customized as per your particular installation requirement. All three models are
available in either a gold vein (similar to appearance to antique brass) or a black power coat
finish. All of the various models of recessed stageboxes have cable entry cutouts in the lids
that will permit the lids to be closed with cables plugged in the box’s internal connection
points.
The first, and the most compact of our floor pocket stageboxes, is called the Mini Floor Box,
or MFBOX5. This box is 5 ½” inches deep and can house up to a maximum of 6 XLR or ¼”
inch connectors.
The two other recessed floor pocket stageboxes we offer are the FBOX5 and FBOX8. These
boxes are extremely heavy duty in construction and are designed for applications where
heavy items such as pianos, amplifiers, or equipment cases may be accidentally rolled over
the stage box lid from time to time. The FBOX5 is 5 inches deep and will house up to 12
XLR or ¼” connectors, while the 8 inch deep FBOX8 can hold up to a maximum of 18 XLR
or ¼” inch connectors.
For ease of wiring, all Quantum recessed floor pocket stageboxes provide 4 different cable
entry points via conduit knockouts on the recessed section of the stage box. All connector
mounting plates in each of the boxes are removable as to allow for easy installation and
servicing.
We also offer custom pre-wired versions of these boxes, with either labeled and prepped
fanouts, or fully terminated fanouts as to provide you with the ability to install, plug and play.
All boxes can be pre-wired as per your individual specifications.
MFBOX (MINI BOX)
FBOX5 (FULL SIZE)
31
For your permanent installation needs we offer a full line of stainless steel wallplates in
single, double, and triple gang sizes. As a standard configuration, we utilize Amphenol brand
xlr connectors, Neutrik brand speakon and locking ¼” connectors and Senior brand ¼” phone
and RCA phono jacks. Upon your request, for an extra fee, we can also substitute Switchcraft
and Neutrik brand connectors for our standard brands of connectors on most of our wallplate
configurations. On wallplates which incorporate either ¼” phone jacks or RCA phono jacks,
as standard practice, we utilize isolation washers as to help prevent grounding problems.
Please consult with your Quantum Audio Designs sales representative when ordering to
determine which of our numerous wallplate configurations will most closely fit your
installation needs.
MODEL
SGP1-S11
SGP2-S11
SGP1-S12B
SGP2-S12B
DGP4-S11
DGP6-S11
DGP4-S12B
DGP6-S12B
SGP1-XFA
SGP2-XFA
SGP1-XMA
SGP2-XMA
DGP3-XFA
DGP4-XFA
DGP3-XMA
DGP4-XMA
SGP1-RCA
SGP2-RCA
SGP1-NL4
SGP2-NL4
SGP1-NS4
SGP1-NS8
SGP-B
DGP-B
PLATE SIZE
SINGLE
SINGLE
SINGLE
SINGLE
DOUBLE
DOUBLE
DOUBLE
DOUBLE
SINGLE
SINGLE
SINGLE
SINGLE
DOUBLE
DOUBLE
DOUBLE
DOUBLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
DOUBLE
DESCRIPTION
1) ISOLATED ¼” MONO PHONE JACKS
2) ISOLATED ¼” MONO PHONE JACKS
1) ISOLATED ¼” TRS PHONE JACKS
2) ISOLATED ¼” TRS PHONE JACKS
4) ISOLATED ¼” MONO PHONE JACKS
6) ISOLATED ¼” MONO PHONE JACKS
4) ISOLATED ¼” TRS PHONE JACKS
6) ISOLATED ¼” TRS PHONE JACKS
1) AMPHENOL XLR FEMALE
2) AMPHENOL XLR FEMALES
1) AMPHENOL XLR MALE
2) AMPHENOL XLR MALES
3) AMPHENOL XLR FEMALE
4) AMPHENOL XLR FEMALES
3) AMPHENOL XLR MALE
4) AMPHENOL XLR MALES
1) ISOLATED RCA PHONE JACK
2) ISOLATED RCA PHONE JACKS
1) NEUTRIK NL4MP SPEAKON
2) NEUTRIK NL4MP SPEAKONS
1) NEUTRIK NL4MP-R SPEAKON
1) NEUTRIK NL8MP-R SPEAKON
BLANK/ NO HOLES
BLANK/ NO HOLES
1 gang- 4 1/2” x 2 3/4” 2 gang- 4 1/2” x 4 1/2” 3 gang- 4 1/2” x 6 11/16”
email at quantumaudiodesigns.com
1.888.545.4404
fax 1.573.545.4411
wall plates
STAINLESS STEEL WALL PLATES
32
MODEL
Q-3022I.E
Q-3100I.K
Q-3022PL.N
Q-40181.E
Q-4016I.E
bulk cable
Q-404I.E
Q-4012I.E
Q-4018PL.N
Q-4016PL.N
Q-4014PL.N
Q-4012PL.N
Q-4016ZIP.K
Q-4014ZIP.C
INSTALLATION GRADE
BULK CABLE
DESCRIPTION
2 conductor cable, 22 ga. 100% coverage foil
shield CMR/CL3R rated, .128 inch O.D.
2 conductor cable, 24 ga. Oxygen free, foil,
shield, CL rated, .175 inch. O.D.
2 conductor cable, 22 ga. 100% coverage foiled
shield, CL2P/CMP rated
2 conductor cable, twisted pair design, 18 ga.
Conductors, CMR/CL3R rated
2 conductor cable, twisted pair design, 16 ga.
Conductors, CMR/CL3R rated
2 conductor cable, twisted pair design, 14 ga.
Conductors, CMR/CL3R rated
2 conductor cable, twisted pair design, 12 ga.
Conductors, CMR/CL3R rated
2 conductor cable, twisted pair design, 18 ga.
Conductors, unshielded, CMP/CL2P rating
2 conductor cable, twisted pair design, 16 ga.
Conductors, unshielded, CMP/CL2P rating
2 conductor cable, twisted pair design, 14 ga.
Conductors, unshielded, CMP/CL2P rating
2 conductor cable, twisted pair design, 12 ga.
Conductors, unshielded, CMO/CL2P rating
2 conductor cable parallel (zip) design, 16 ga.
Conductors, unshielded, black jacket
2 conductor cable, parallel (zip) design, 14 ga.
Conductors, unshielded, clear jacket
APPLICATIONS
Low-Z mic & balanced line level for
permanent installs
Low-Z mic & balanced line level for
permanent install requiring Plenum cable
Low-Z mic & balanced line level for
permanent install requiring Plenum cable
Speaker cabling for permanent installs for
requiring riser rated cable
Speaker cabling for permanent installs
requiring riser rated cable
Speaker cabling for permanent installs for
requiring riser rated cable
Speaker cabling for permanent installs for
requiring riser rated cable
Speaker cabling for permanent installs
requiring plenum cable
Speaker cabling for permanent installs
requiring plenum cable
Speaker cabling for permanent installs
requiring plenum cable
Speaker cabling for permanent installs
requiring plenum cable
Speaker cabling installs not requiring a fire
rating, light duty, portable cordage
Speaker cabling installs not requiring a fire
rating, light duty, portable cordage
QUANTUM MULTI-CHANNEL “SNAKE” CABLE
4 pairs of individually shielded, oxygen-free (OFHC)
24 gauge conductors, 100% coverage foil shields.
8 pairs of individually shielded, oxygen-free (OFHC)
24 gauge conductors, 100% coverage foil shields.
12 pairs of individually shielded, oxygen-free (OFHC)
24 gauge conductors, 100% coverage foil shields.
16 pairs of individually shielded, oxygen-free (OFHC)
24 gauge conductors, 100% coverage foil shields.
20 pairs of individually shielded, oxygen-free (OFHC)
24 gauge conductors, 100% coverage foil shields.
28 pairs of individually shielded, oxygen-free (OFHC)
24 gauge conductors, 100% coverage foil shields.
32 pairs of individually shielded, oxygen-free (OFHC)
24 gauge conductors, 100% coverage foil shields.
40 pairs of individually shielded, oxygen-free (OFHC)
24 gauge conductors, 100% coverage foil shields.
48 pairs of individually shielded, oxygen-free (OFHC)
24 gauge conductors, 100% coverage foil shields.
Q-5104
Q-5108
Q-5112
Q-5116
Q-5120
Q-5128
Q-5132
Q-5140
Q-5148
Audio snakes & multi-tracks carrying
microphone & line level audio signals.
Audio snakes & multi-tracks carrying
microphone & line level audio signals.
Audio snakes & multi-tracks carrying
microphone & line level audio signals.
Audio snakes & multi-tracks carrying
microphone & line level audio signals.
Audio snakes & multi-tracks carrying
microphone & line level audio signals.
Audio snakes & multi-tracks carrying
microphone & line level audio signals.
Audio snakes & multi-tracks carrying
microphone & line level audio signals.
Audio snakes & multi-tracks carrying
microphone & line level audio signals.
Audio snakes & multi-tracks carrying
microphone & line level audio signals.
QUANTUM MULTI-CHANNEL “POWER SNAKE” CABLE
Q-5108PS
Q-5114PS
33
10 pairs of individually shielded, oxygen-free (OFHC)
24 gauge conductors, 100% coverage foil shields. 2
pairs, 14 gauge speaker cables
14 pairs of individually shielded, oxygen-free (OFHC)
24 gauge conductors, 100% coverage foil shields. 2
pairs, 14 gauge speaker cables
Audio snakes for powered mixers
carrying microphone, line and speaker
level audio signals.
Audio snakes for powered mixers
carrying microphone, line and speaker
level audio signals.
MODEL
GL-2000
Q-2000
Q-2100
Q-2300
Q-3100
Q-3100M
Q-3200
Q-4118
Q-4116
Q-4114
Q-4112
Q-4414
Q-4412
Q-481214
DESCRIPTION
Single conductor, 20 awg. Cable, 75% coverage serve
shield, .240 in. O.D.
Single conductor, 20 awg. Cable, 75% coverage serve
shield, .245 in. O.D.
Single conductor, oxygen-free, 20 awg. Cable, 95%
coverage serve shield, .265 in. O.D.
Single conductor, oxygen-free, 16 awg. Cable, 95%
coverage serve shield, .310 in. O.D.
Two conductor cable, oxygen-free copper, 24 ga.
Conductors, 95% coverage serve shield, .250 in. O.D.
Miniature Two conductor cable, oxygen-free copper, 24
ga. Conductors, 95% coverage serve shield, .200 in. O.D.
Four conductor cable, oxygen-free copper, 24 ga.
Conductors, 95% coverage braid shield .245 in. O.D.
Two conductor cable, oxygen-free copper, 18 ga.
Conductors, twisted pair design, .260 in. O.D.
Two conductor cable, oxygen-free copper, 16 ga.
Conductors, twisted pair design, .285 in. O.D.
Two conductor cable, oxygen-free copper, 14 ga.
Conductors, twisted pair design, .360 in. O.D.
Two conductor cable, oxygen-free copper, 12 ga.
Conductors, twisted pair design, .391 in. O.D.
Four conductor cable, oxygen-free copper, 14 ga.
Conductors, twisted pair design, .400 in. O.D.
Four conductor cable, oxygen-free copper, 14 ga.
Conductors, twisted pair design, .435 in. O.D.
Eight conductor cable, oxygen-free copper, 4) 12 ga.
Conductors 4) 14 ga. Conductors, .545 in. O.D.
APPLICATIONS
Guitar, Hi-Z microphone
Guitar, Hi-Z microphone
Guitar, Hi-Z microphone
Guitar, Hi-Z microphone
Low-Z microphone, balanced
line level
Low- Z microphone, balanced
line level
Low-Z microphone, balanced
line level, midi cable
Power amplifier to speaker
applications
Power amplifier to speaker
applications.
Power amplifier to speaker
applications.
Power amplifier to speaker
applications.
Two channel speaker
applications
Two channel speaker
applications
Four channel speaker
applications
BULK CONNECTORS
AMPHENOL
MODEL
31.-10-75
31-10-RFX
31-320-RFX
31-321-RFX
31-71008-1000
AC3F
AC3FB
AC3FBAU
AC3FDP
AC3FDZ
AC3FDZB
AC3FPP
AC3FPZ
AC3FPZB
AC3M
AC3MB
AC3MCP
AC3MDP
AC3MDZ
AC3MDZB
AC3MM
AC3MMB
AC3MMBAU
AC3MMDZ
APPLICATIONS
BNC 75 OHM ISOLATED SOLDER RECEPTACLE NICKEL SHELL/CONTACTS
BNC 50 OHM ISOLATED SOLDER RECEPTACLE NICKEL SHELL/CONTACTS
BNC 50 OHM CRIMP PLUG NICKEL SHELL/GOLD CONTACTS RG58/141/142A CABLE
BNC 50 OHM CRIMP PLUG NICKEL SHELL/GOLD CONTACTS RG59/62 CABLE
BNC 75 OHM CRIMP PLUG NICKEL SHELL/GOLD CONTACTS RG59 CABLE
3 PIN FEMALE CM XLR, NICKEL SHELL
3 PIN FEMALE CM XLR, BLACK SHELL
3 PIN FEMALE CM XLR, BLACK SHELL/GOLD CONTACTS
3 PIN FEMALE PM XLR, PLASTIC
3 PIN FEMALE PM XLR, NICKEL “D” TYPE FLANGE
3 PIN FEMALE PM XLR BLACK “D” TYPE FLANGE
3 PIN FEMALE PM XLR, BLACK PLASTIC “P” TYPE FLANGE
3 PIN FEMALE PM XLR, NICKEL “P” TYPE FLANGE
3 PIN FEMALE PM XLR, BLACK “P” TYPE FLANGE
3 PIN MALE CM XLR, NICKEL SHELL, STAMPED CONTACTS
3 PIN MALE CM XLR, BLACK SHELL, STAMPED CONTACTS
3 PIN MALE CM XLR, BLACK PLASTIC SHELL, STAMPED CONTACTS
3 PIN MALE PM XLR, PLASTIC
3 PIN MALE PM XLR, NICKEL “D” TYPE FLANGE STAMPED CONTACTS
3 PIN MALE PM XLR, BLACK “D” TYPE FLANGE, STAMPED CONTACTS
3 PIN MALE CM XLR, NICKEL SHELL MACHINED CONTACTS
3 PIN MALE CM XLR, BLACK SHELL, MACHINED CONTACTS
3 PIN MALE CM XLR, BLACK SHELL/ GOLD MACHINED CONTACTS
3 PIN MALE PM XLR, NICKEL “D” TYPE FLANGE, MACHINED CONTACTS
bulk cable/connectors
QUANTUM BULK WIRE
34
BULK CONNECTORS
AMPHENOL
MODEL
connectors
35
AC3MMPNZ
AC3MPP
AC4F
AC4M
AC5F
AC5M
AC6AF
AC6AM
AC7F
AC7M
EP-4-11P
EP-4-12
EP-4-13P
EP-6-11P
EP-6-12
EP-6-13P
EP-6-14
EP-8-11P
EP-8-12
EP-8-13P
TM2PJ-AU
TM2PJ
APPLICATIONS
3 PIN MALE PM XLR, NICKEL “PN” TYPE FLANGE, MACHINED CONTACTS
3 PIN MALE PM XLR, BLACK PLASTIC “P” TYPE FLANGE
4 PIN FEMALE CM XLR NICKEL SHELL
4 PIN MALE CM XLR NICKEL SHELL
5 PIN FEMALE CM XLR NICKEL SHELL
5 PIN MALE CM XLR NICKEL SHELL
6 PIN FEMALE CM XLR NICKEL SHELL
6 PIN MALE CM XLR NICKEL SHELL
7 PIN FEMALE CM XLR NICKEL SHELL
7 PIN MALE CM XLR NICKEL SHELL
4 PIN FEMALE PM EP SERIES NICKEL SHELL, MACHINED CONTACTS
4 PIN MALE CM EP SERIES NICKEL SHELL
4 PIN FEMALE PM EP SERIES, NICKEL SHELL, MACHINED CONTACTS
6 PIN FEMALE CM EP SERIES, NICKEL SHELL
6 PIN MALE CM EP SERIES, NICKEL SHELL
6 PIN FEMALE PM EP SERIES, NICKEL SHELL, MACHINED CONTACTS
6 PIN MALE PM EP SERIES, NICKEL SHELL, MACHINED CONTACTS
8 PIN FEMALE CM EP SERIES NICKEL SHELL
8 PIN MALE CM EP SERIES, NICKEL SHELL
8 PIN FEMALE PM EP SERIES, NICKEL SHELL, STAMPED CONTACTS
¼ 2CON PHONE PLUG, SATIN NICKEL SHELL, GOLD PLATED CONTACTS
¼ 2CON PHONE PLUG, SATIN NICKEL SHELL, NICKEL PLATED CONTACTS
G&H
MODEL
BF2P300-NGG
BF2P300-NNN
BF2P322-BNN
BF2P322-NGG
BF2P322-NNN
BF2P375-BGG
BF2P375-BNN
BF2P375-NGG
BF2P375-NNN
BF2PS-BGG
BF2PS-BNN
BF2PS-NGG
BF2PS-NNN
BF3P322-BGGG
BF3P322-NGGG
BF3P322-NNNN
BF3P375-NNNN
BFQP322-NNN
BFQP322-NGG
BFQP375-NNN
BFQP375-NGG
MF2P437-NNN
MF3P437-NNN
RF2P322-NGG
RF2P322-NNN
RF2P375-NGG
RF2P375-NNN
APPLICATIONS
¼ 2CON PHONE PLUG, NICKEL BARREL/GOLD PLUG, .300” ENTRANCE
¼ 2CON PHONE PLUG, NICKEL BARREL AND PLUG, .300” ENTRANCE
¼ 2CON PHONE PLUG, BLACK BARREL/ NICKEL PLUG, .322” ENTRANCE
¼ 2CON PHONE PLUG, NICKEL BARREL/ GOLD PLUG, .322” ENTRANCE
¼ 2CON PHONE PLUG, NICKEL BARREL AND PLUG, .322” ENTRANCE
¼ 2CON PHONE PLUG, BLACK BARREL/ GOLD PLUG,.375” ENTRANCE
¼ 2CON PHONE PLUG, BLACK BARREL/ NICKEL PLUG, .375” ENTRANCE
¼ 2CON PHONE PLUG, NICKEL BARREL/ GOLD PLUG, .375” ENTRANCE
¼ 2CON PHONE PLUG, NICKEL BARREL AND PLUG, .375” ENTRANCE
¼ 2CON SPEAKER PLUG, BLACK BARREL/ GOLD PLUG, .375” ENTRANCE
¼ 2CON SPEAKER PLUG, BLACK BARREL/ NICKEL PLUG, .375” ENTRANCE
¼ 2CON SPEAKER PLUG, NICKEL BARREL/ GOLD PLUG, .375” ENTRANCE
¼ 2CON SPEAKER PLUG, NICKEL BARREL AND PLUG, .375” ENTRANCE
¼ 3CON PHONE PLUG, BLACK BARREL/ GOLD PLUG, .322” ENTRANCE
¼ 3CON PHONE PLUG, NICKEL BARREL/ GOLD PLUG, .322” ENTRANCE
¼ 3CON PHONE PLUG, NICKEL BARREL AND PLUG, .322” ENTRANCE
¼ 3CON PHONE PLUG, NICKEL BARREL AND PLUG, .375” ENTRANCE
¼ 2CON QUIET PHONE PLUG, NICKEL BARREL AND PLUG, .322” ENTRANCE
¼ 2CON QUIET PHONE PLUG, NICKEL BARREL/ GOLD PLUG, .322” ENTRANCE
¼ 2CON QUIET PHONE PLUG, NICKEL BARREL AND PLUG, .375” ENTRANCE
¼ 2CON QUIET PHONE PLUG, NICKEL BARREL/ GOLD PLUG, .375” ENTRANCE
¼ 2CON JUMBO PHONE PLUG, NICKEL BARREL AND PLUG, .437” ENTRANCE
¼ 3CON JUMBO PHONE PLUG, NICKEL BARREL AND PLUG, .437” ENTRANCE
¼ 2CON RIGHT ANGLE PHONE PLUG, NICKEL BARREL/ GOLD PLUG, .322” ENTRANCE
¼ 2CON RIGHT ANGLE PHONE PLUG, NICKEL BARREL AND PLUG, .322” ENTRANCE
¼ 2CON RIGHT ANGLE PHONE PLUG, NICKEL BARREL/ GOLD PLUG, .375” ENTRANCE
¼ 2CON RIGHT ANGLE PHONE PLUG, NICKEL BARREL AND PLUG, .375” ENTRANCE
G&H
MODEL
RF3P322-NGGG
RF3P322-NNNN
RF3P375-NGGG
RF3P375-NNNN
RFQP322-NNN
RFQP375-NNN
APPLICATIONS
¼ 3CON RIGHT ANGLE PHONE PLUG, NICKEL BARREL/ GOLD PLUG, .322” ENTRANCE
¼ 3CON RIGHT ANGLE PHONE PLUG, NICKEL BARREL AND PLUG, .322” ENTRANCE
¼ 3CON RIGHT ANGLE PHONE PLUG, NICKEL BARREL/ GOLD PLUG, .375” ENTRANCE
¼ 3CON RIGHT ANGLE PHONE PLUG, NICKEL BARREL AND PLUG, .375” ENTRANCE
¼ 2CON RIGHT ANGLE QUIET PLUG, NICKEL BARREL AND PLUG, .322” ENTRANCE
¼ 2CON RIGHT ANGLE QUIET PLUG, NICKEL BARREL AND PLUG, .375” ENTRANCE
MODEL
¼ TRSPMFP
¼ TRSRACMF
¼ TRSCMM
¼ TSCMF
¼ TSCMM
¼ TSCMMNG
¼ TSCMML
¼ TSJCMF
¼TSJCMM
¼ TSPMF
¼ TSPMF
¼ TSPMFP
¼ TSRACMM
¼ TSRACMMF
2.5TRSCMM
3.5TRSCMM
3.5TRSPMF
3.5TSCMF
3.5TSCMM
AA-ADD
AA-AT
AA-BS
AA-CN
AA-DD
AA-DDP
AA-DDS
AA-DP
AA-DDY
AA-DY
AA-FF
AA-FS
AA-FT
AA-FX
AA-MBPFF-K
AA-MBPFF-R
AA-NN
AA-NNP
AA-NY
AA-PP
AA-PZ
AA-ST
AA-SX
AA-TX
APPLICATIONS
¼ 3CON PLASTIC PM RECEPTACLE
¼ 3CON FLAT RA PHONE PLUG, NICKEL 8.2MM BARREL AND PLUG
¼ 3CON PHONE PLUG, NICKEL 8.2MM BARREL AND PLUG
¼ 2CON NICKEL CM JACK
¼ 2CON PHONE PLUG, NICKEL 8.2MM BARREL AND PLUG
¼ 2CON PHONE PLUG, NICKEL 8.2MM BARREL/ GOLD PLUG
¼ 2CON PHONE PLUG, NICKEL 9.4MM BARREL AND PLUG
¼ 2CON JUMBO NICKEL PHONE JACK
¼ 2CON JUMBO PHONE PLUG, NICKEL 13MM BARREL AND PLUG
¼ 2CON NICKEL PM RECEPTACLE
¼ 3CON NICKEL PM RECEPTACLE
¼ 2CON PLASTIC PM RECEPTACLE/ NEW #SI-508-1
¼ 2CON ROUND RIGHT ANGLE PHONE PLUG, NICKEL 8.2MM BARREL AND PLUG
¼ 2CON FLAT RIGHT ANGLE PHONE PLUG, NICKEL BARREL & PLUG “PANCAKE
TYPE”
2.5MM 3CON NICKEL PHONE PLUG
3.5MM 3CON NICKEL PHONE PLUG
3.5MM 3CON NICKEL PHONE PLUG
3.5MM 2CON NICKEL PHONE PLUG
3.5MM 3CON NICKEL PHONE PLUG
AUDIO ADAPTER 3.5MM TRS PLUG TO RCA JACKS
AUDIO ADAPTER 3.5MM TRS PLUG TO ¼ TRS JACK
AUDIO ADAPTER ¼ TRS PLUG TO 3.5MM TRS JACK
AUDIO ADAPTER RCA PLUG TO ¼ TS JACK
AUDIO ADAPTER RCA JACKS
AUDIO ADAPTER ¼ TS PLUG TO RCA JACKS
AUDIO ADAPTER ¼ TRS PLUG TO RCA JACKS
AUDIO ADAPTER RCA JACK TO ¼ TS PLUG
AUDIO ADAPTER RCA JACKS TO 3.5MM TS PLUG
AUDIO ADAPTER 3.5MM TS TO RCA JACK
AUDIO ADAPTER XLRF TO XLRF
AUDIO ADAPTER XLRF TO ¼ TRS PLUG
AUDIO ADAPTER XLRF TO ¼ TRS JACK
AUDIO ADAPTER XLRF TO XLRM
AUDIO ADAPTER DOUBLE BANANA JACKS, BLACK
AUDIO ADAPTER DOUBLE BANANA JACKS, RED
AUDIO ADAPTER ¼ TS JACKS
AUDIO ADAPTER ¼ TS PLUG TO ¼ TS JACKS
AUDIO ADAPTER ¼ TS JACK TO 3.5 MM TS PLUG
AUDIO ADAPTER ¼ TS PLUGS
AUDIO ADAPTER ¼ TS PLUG TO 3.5 MM TS JACK
AUDIO ADAPTER ¼ TRS PLUG TO TRS JACK
AUDIO ADAPTER ¼ TRS PLUG TO XLRM
AUDIO ADAPTER ¼ TRS JACK TO XLRM
connectors
IMPORT
36
IMPORT
MODEL
connectors
37
AA-XX
MDP-K
MDP-R
MDPL-K
MDPL-R
MDPG-K
MDPG-R
RCACMF
RCACMM305
RCACMMNG
RCARACMM
RCARACMMLG.K
RCARACMMLG.R
SBPG-K
SBPG-R
XLR3PMM
XLR3CMM
XLR3CMF
MODEL
BSP-R
BSP-W
BSTP-BL
BSTP-GRN
BSTP-V
BSTP-W
BSTP-T
BSX-R
BSX-W
NC3FD-L
NCFD-L-1
NC3FP-1
NC3FP-1-B
NC3FP-1-BAG
NC3FRC
NC3FRC-BAG
NC3FX-B
NC3FX-BAG-D
NC3FX-D
NC3FX-HD
NC3FX-S
NC3FX-S-B
NC3MD-L-1
NC3MP
NC3MP-B
NC3MP-BAG
NC3MPP
NC3MRC
NC3MRC-BAG-D
NC3MX-B
NC3MX-BAG
NC3MX-D
NCMX-HD
NC5MX
APPLICATIONS
AUDIO ADAPTER XLRM TO XLRM
BLACK DOUBLE BANANA PLUG
RED DOUBLE BANANA PLUG
BLACK DOUBLE BANANA PLUG WITH LARGER OPENING
RED DOUBLE BANANA PLUG WITH LARGER OPENING
GOLD PLATED DOUBLE BANANA PLUG, BLACK
GOLD PLATED DOUBLE BANANA PLUG, RED
RCA NICKEL CM JACK
RCA NICKEL CM PLUG .305 ENTRY
RCA BLACK BARREL/ GOLD PLUG
RCA RIGHT ANGLE NICKEL CM PLUG
RCA RIGHT ANGLE GOLD CM PLUG, BLACK STRIPE
RCA RIGHT ANGLE GOLD CM PLUG, RED STRIPE
GOLD SOLDERLESS STACKUP BANANA PLUG, BLACK
GOLD SOLDERLESS STACKUP BANANA PLUG, RED
3 PIN FEMALE NICKEL PM XLR
3 PIN MALE NICKEL CM XLR
3 PIN FEMALE NICKEL CM XLR
NEUTRIK
APPLICATIONS
¼ RED BOOT
¼ WHITE BOOT
BLUE NP3TT SLEEVE
GREEN NP355 SLEEVE
VIOLET NP3TT SLEEVE
WHITE NP3TT SLEEVE
YELLOW NP3TT SLEEVE
XLR RED BOOT
XLR WHITE BOOT
3 PIN FEMALE PM XLR NICKEL “D” TYPE FLANGE SCREW IN INSERT
3 PIN FEMALE PM XLR NICKEL “D” TYPE FLANGE
3 PIN FEMALE PM XLR NICKEL “P” TYPE FLANGE
3 PIN FEMALE XLR BLACK SHELL/ GOLD CONTACTS “P” TYPE FLANGE
3 PIN FEMALE PM XLR BLACK SHELL/ SILVER CONTACTS “P” TYPE FLANGE
3 PIN FEMALE CM NICKEL SHELL, RIGHT ANGLE XLR
3 PIN FEMALE CM BLACK SHELL/ SILVER CONTACTS, RIGHT ANGLE XLR
3 PIN FEMALE CM BLACK SHELL/ GOLD CONTACTS XLR
3 PIN FEMALE CM BLACK SHELL/ SILVER CONTACTS XLR
3 PIN FEMALE CM NICKEL SHELL XLR
3 PIN FEMALE CM NEOPRENE NICKEL SHELL/ GOLD CONTACTS XLR
3 PIN FEMALE CM NICKEL SHELL XLR ON/OFF SWITCH
3 PIN FEMALE CM BLACK SHELL/ GOLD CONTACTS XLR ON/OFF SWITCH
3 PIN MALE PM XLR NICKEL “D” TYPE FLANGE
3 PIN MALE PM XLR NICKEL “P” TYPE FLANGE
3 PIN MALE PM XLR BLACK SHELL/ GOLD CONTACTS “P” TYPE FLANGE
3 PIN MALE PM XLR BLACK SHELL “P” TYPE FLANGE
3 PIN MALE PM XLR PLASTIC “D” TYPE FLANGE
3 PIN MALE CM NICKEL SHELL, RIGHT ANGLE XLR
3 PIN MALE CM BLACK SHELL/ SILVER CONTACTS, RIGHT ANGLE XLR
3 PIN MALE CM BLACK SHELL/ GOLD CONTACTS XLR
3 PIN MALE CM BLACK SHELL/ SILVER CONTACTS XLR
3 PIN MALE CM NICKEL SHELL XLR
3 PIN MALE CM STAINLESS STEEL SHELL/ GOLD CONTACTS XLR
5 PIN MALE CM NICKEL SHELL XLR
NEUTRIK
NC5FX
NJ10FI-V
NCJ5FI-S
NJ3FC6
NJ3FP6C
NL2FC
NL2MP
NL4FC
NA4LJ
NL4FRX
NL4MM
NL4MP
NL4MPR
NL8FC
NL8MM
NL8MPR
NP2C
NP2C-BAG
NP2C-T10AA
NP2RC
NP3C
NP3C-BAG
NP3RC
NP3RC-BAG
NP3TB-B
NP3TB-R
NP3TT-2
NP3TT-P-B
NP3TT-P-R
NYS220
NYS221
NYS322
NYS325
NYS352
APPLICATIONS
5 PIN FEMALE CM NICKEL SHELL XLR
3 POLE COMBO PM RECEPTACLE FEM XLR/ ¼” TRS JACK VERT. PCB CONTACTS
SWITCH
3 POLE COMBO PM RECEPTACLE FEM XLR ¼” TRS SOLDER CUPS NON SWITCHING
¼ 3 CON CM NICKEL SHELL LOCKING JACK
¼” 3 CON PM NICKEL SHELL LOCKING JACK
2 POLE FEMALE CM SPEAKON
2 POLE MALE PM S\PEAKON “D” TYPE FLANGE
4 POLE FEMALE CM SPEAKON
AUDIO ADAPTER ¼” TS JACK TO 4 PIN SPEAKON
4 POLE FEMALE CM RIGHT ANGLE SPEAKON
4 POLE CM SPEAKON COUPLER
4 POLE MALE PM SPEAKON “D” TYPE FLANGE
4 POLE MALE PM SPEAKON ROUND FLANGE
8 POLE FEMALE CM SPEAKON
8 POLE CM SPEAKON COUPLER
8 POLE MALE PM SPEAKON ROUND FLANGE
¼ 2CON CM NICKEL SHELL PHONE PLUG .285” ENTRANCE
¼ 2CON CM BLACK SHELL/ SILVER CONTACT PHONE PLUG
¼ 2CON CM NICKEL SHELL TRANSFORMER PLUG
¼ 2CON CM NICKEL SHELL RIGHT ANGLE PHONE PLUG
¼ 3CON CM NICKEL SHELL PHONE PLUG
¼ 3CON BLACK SHELL/SILVER CONTACTS PHONE PLUG
¼ 3CON CM NICKEL SHELL RIGHT ANGLE PHONE PLUG
¼ 3CON BLACK SHELL RIGHT ANGLE PHONE PLUG
¼ 3CON CM BLACK COATED BRASS SHELL MILITARY GA PHONE PLUG, SILVER
CONT.
1/3 3CON CM RED COATED BRASS SHELL MILITARY GA. PHONE PLUG SILVER CONT.
4.4MM 3CON BLK. PLASTIC SLEEVE SILVER CRIMP CONTACT DUAL BANTAM
4.4MM 3CON CM BLK. PLASTIC SLEEVE SILVER CRIMP CONTACT BANTAM PH. PLUG
4.4MM 3CON CM RED PLASTIC SLEEVE SILVER CRIMP CONTACT BANTAM PH. PLUG
¼ 2CON PM NICKEL JACK LONG BUSHING FLUSH HEAD
¼ 2CON PM NICKEL JACK LONG BUSHING STRAP HEAD
5PIN MALE CM NICKEL PLATED DIN. JACK
5PIN FEMALE PM NICKEL PLATED DIN. JACK
RCA NICKEL PLATED CM PHONO PLUG
SWITCHCRAFT
MODEL
11
121
128
12A
12B
131
151
152B
181
184
184L
226
236
2501F
285L
APPLICATIONS
¼ 2CON PM NICKEL JACK
¼ 2CON CM NICKEL JACK, .266” ENTRANCE
¼ 2CON CM NICKEL JUMBO JACK
¼ 2CON PM NICKEL JACK TIP SHUNT
¼ 3CON PM NICKEL JACK
¼ 3CON CM NICKEL JACK
¼ 2CON PM NICKEL JACK THICK PANEL BUSHING
¼ 3CON PM NICKEL THICK PANEL BUSHING
¼ 2CON CM NICKEL SILENT PLUG 250” ENTRANCE
¼ 2CON CM NICKEL JUMBO PHONE PLUG .380” ENTRANCE SOLDER
¼ 2CON CM NICKEL JUMBO PHONE PLUG .451” ENTRANCE SOLDER
¼ 2CON ROUND RIGHT ANGLE NICKEL PLUG .265” ENTRANCE
¼ 3CON ROUND RIGHT ANGLE NICKEL PLUG .265” ENTRANCE
SCREW ON MIC PLUG .281” ENTRANCE
¼ 2CON CM NICKEL PHONE PLUG .375” ENTRANCE
connectors
MODEL
38
SWITCHCRAFT
MODEL
APPLICATIONS
connectors
297
2P1603 (280)
3501F
3501FR
3503
3502RA
361A
57GB5F
70
A3F
A3FB
A3FBAU
A3M
A3MB
A3MBAU
AA3F
AA3FB
AA3M
AA3MB
D3F
D3M
L11
L12A
L12B
NL112B
T3F
TA3F
TA3FL
TA3ML
TA4FL
Z15J
91-MC3M
91-MC4M
¼ 3CON CM NICKEL PHONE PLUG .297” ENTRANCE
¼ 2CON CM NICKEL PHONE PLUG .297” ENTRANCE
RCA 2CON PM NICKEL JACK PHONO JACK PLASTIC FLANGE MOUNTING
RCA 2CON PM NICKEL JACK PHONO JACK NUT MOUNTING
RCA 2CON NICKEL JACK .172” ENTRANCE
RCA 2CON RA NICKEL SHELL
AUDIO ADAPTER SHIELDED ¼ TS JACKS
5 PIN PM METAL DIN. JACK
¼ 2CON CM NICKEL JUMBO PHONE PLUG .380” ENTRANCE, SCREW TERMINALS
3 PIN FEMALE CM NICKEL SHELL XLR SCREW RETENTION
3 PIN FEMALE CM BLACK SHELL XLR SCREW RETENTION
3 PIN FEMALE CM BLACK SHELL, GOLD CONTACTS, XLR SCREW RETENTION
3 PIN MALE CM NICKEL SHELL XLR SCREW RETENTION
3 PIN MALE CM BLACK SHELL, XLR SCREW RETENTION
3 PIN MALE CM BLACK SHELL, GOLD CONTACTS, XLR SCREW RETENTION
3 PIN FEMALE CM NICKEL SHELL XLR
3 PIN FEMALE CM BLACK SHELL, XLR SCREW RETENTION
3 PIN MALE CM NICKEL SHELL XLR
3 PIN MALE CM BLACK SHELL XLR
3 PIN FEMALE PM NICKEL XLR
3 PIN MALE PM NICKEL XLR
¼ 2CON PM NICKEL .375” BUSHING JACK
¼ 2CON PM NICKEL, .375” BUSHING JACK TIP SHUNT
SWC ¼ 3CON THICK PM PHONE JACK
¼ 3CON PM ENCLOSED JACK, .375” BUSHING
3 PIN FEMALE CM NICKEL SHELL, XLR ON/OFF SWITCH
3 PIN MINI FEMALE CM NICKEL SHELL XLR, .115” ENTRANCE
3 PIN MINI FEMALE CM NICKEL SHELL XLR, .170” ENTRANCE
3 PIN MINI MALE CM NICKEL SHELL XLR, .170” ENTRANCE
4 PIIN MINI FEMALE CM NICKEL SHELL XLR, .170” ENTRANCE
¼ 2CON PM NICKEL HIGH POWER SPEAKER JACK
3 PIN SCREW ON, XLR STYLE PLUG
4 PIN SCREW ON XLR STYLE PLUG
Contact your Quantum Sales
Representative
f o r p r i c i n g a n d a v a i l a b i l i t y.
QUANTUM AUDIO DESIGNS, INC.
Shipping: #1 Quantum Drive
Benton, MO 63736
Mailing: P.O. Box 130
Benton, MO 63736
Phone: 1.573.545.4404
Toll Free Phone: 1.888.545.4404
Fax: 1.573.545.4411
Email: sales@quantumaudiodesigns.com
39
WARRANTY POLICIES
All Quantum Audio Designs instrument, midi, microphone, speaker, and patch cables listed
in our standard product catalog are warranted for up to a 10 year period from date of
manufacture. All multi-channel audio snakes, multi-tracks, specialty Y and adapter cables,
direct and device boxes, and any custom design audio or video cables are warranted for a
period of 1 year from date of manufacture.
Although our warranty covers any defects in materials and/or workmanship during the
warranty period, we cannot warranty defects or damage caused to the product due to misuse
or abuse, or normal wear & tear. Our 10-year warranty coverage is offered only to end-users
of our products who have purchased their products from an authorized reseller of Quantum
products. To qualify for our 10 year warranty coverage, the purchaser (end-user) is required
within 30 days from the purchase date of their Quantum product, to submit to Quantum
Audio Designs Inc, 1) a legible copy of their original sales receipt, 2) the original cable
sleeve in which their cable product was packaged, and 3) the purchaser’s name, mailing
address and or physical shipping address if different, daytime telephone contact number, and
email address if available. This information will be kept on file for purposes of warranty
registration and direct correspondence between our company only, and the end-user of our
product. All such information will be used for the purposes of satisfying any warranty claims
that might arise, and for conveying to the end-user any advertising offers, product updates or
new product offerings that our company may currently have in effect. In the event that the
end-user does not register the purchase of their Quantum product with Quantum Audio
Designs Inc within 30 days from their date of purchase, the warranty coverage will revert to 1
year from the original date of purchase.
In the event a Quantum product has been purchased by an end-user and is suspected to be
defective or malfunctioning, we require that our factory first be contacted in an effort to
determine the nature and possible cause of the problem. If our factory representative
determines that the product will have to be returned to our factory for service, a RMA# will
be issued. This RMA# should be written on the outside of the shipping container and the
product should be returned, freight prepaid to our factory for servicing. We ask that a letter
explaining the nature of the defect, the return shipping address, the RMA# assigned to your
warranty claim, and proof of purchase be included in your shipment. Quantum products
deemed within warranty will be repaired, or even possibly replaced if our technicians deem
replacement necessary. Once warranty service is completed, warranted products will be
shipped to the end-user, freight prepaid via normal common carrier to the return address
provided. Any defective product returned by an authorized Quantum reseller which qualify
for warranty service will be included with the resellers next product shipment, once warranty
servicing is complete.
In the event, a Quantum product has been purchased by one of our authorized dealers and
has not yet been sold and is suspected by the dealer to be defective, or has been purchased
from the dealer by an end-user and returned to the dealer as defective within 15 days of
purchase, we require the dealer to contact their regional service representative to discuss the
suspected problem and to determine how the warranty claim will be handled. These types of
warranty issues, classified as “New Product Defects” require that the product in question
must be in “like new” or “Showroom” condition. Due to the fact that these types of warranty
issues are extremely rare, the repair or replacement arrangements made for these products
will be made on a case by case basis, with the final determination of any arrangements to be
determined by Quantum Audio Designs Inc.
40
Open as PDF
Similar pages
Seagate ST3390N Installation guide