Sunbeam Bedding Heated Throw User's Manual

QUICK SET-UP GUIDE

Heated Throw

STeP

1 Connect the Control

Cord connector and module securely

STeP

2 Plug Power Cord into wall

Flag Tag

Control

Power

Cord

Flag Tag

Control

Power

Cord

Module

Throw Cord

Connector

Label

Throw Cord

Module

Throw Cord

Connector

Label

Throw Cord

Control Cord

Connector

PleASe follow these directions in the order they are given to ensure your product will work correctly. Do not turn on the product until it has been fully assembled.

cAuTION:

• Always make sure cords and controls are NOT trapped or pinched between bed slats, mattress, springs, against wall, foot board or bed frame, or between furniture, walls or chairs.

• Do not plug main power cord into the wall outlet until you have completely set up your heated product per the instructions.

IMPORTANT

For questions or support, please visit www.sunbeambedding.com.

5