QUICK SET-UP GUIDE
Heated Throw
STEP
1 Connect the Control
Cord connector and module securely
STEP
2 Plug Power Cord into wall
Flag Tag
Control
Power
Cord
Flag Tag
Control
Power
Cord
Module
Throw Cord
Connector
Label
Throw Cord
Module
Throw Cord
Connector
Label
Throw Cord
Control Cord
Connector
PLEASE follow these directions in the order they are given to ensure your product will work correctly. Do not turn on the product until it has been fully assembled.
CAUTION:
• Always make sure cords and controls are NOT trapped or pinched between bed slats, mattress, springs, against wall, foot board or bed frame, or between
IMPORTANTE furniture, walls or chairs.
• Do not plug main power cord into the wall outlet until you have completely set up your heated product per the instructions.
For questions or support, please visit www.sunbeambedding.com.
© 2011 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved. Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.