advertisement
Product Brief: Powereta™ – Single Output High Current Double-P Quarter Brick
Powereta™ iQP Series Double-P Quarter Bricks
48V Input, 3.3V/70A and 2.5V/80A Output
Features
• RoHS Compliant
• Standard Double-P Quarter Brick Pinout
• Size: 2.28” × 1.45” × 0.5”
• Up to 80A of output current
• Power density: up to 140W / in
3
• Maximum efficiency – up to 93.5%
• Full load efficiency: 89% to 91.5%
• Output power – up to 231W in high ambient temperature, low airflow environments with minimal derating
• Wide output voltage trim range
• Industry standard output voltage trim
• Basic insulation – 1500Vdc
• Choice of remote on/off configuration
• Remote sense
• Constant switching frequency
• Latched output over-voltage protection
• Auto-recovery full protections: o Input under and over voltage o Output over-current o Output short circuit o Thermal limit
• UL 60950 (US and Canada), VDE 0805,
CB scheme (IEC950) Safety markings and CE Mark (EN60950)
• Optional 0.110”, 0.145”, 0.180” pin length
• Optional non-latching OVP protection
• EMI: CISPR 22 A or B with external filter
• Multiple patents pending
• ISO9000 certified manufacturing facilities
The Powereta™ iQP Series offers an industry standard extra output pins (Double-P) quarter brick high current power module with true useable output power.
Its 89% to 91.5% full load efficiency and superior thermal performance make the Powereta™
Series of power modules ideally suited for tight space and powerhungry applications in demanding thermal environments. This rugged building block is designed to serve as the core of your high reliability system. A wide output voltage trim range, -20 to +10%, and remote sensing are standard features enhancing versatility.
TDK Innoveta Base
Product Code iQP48070A033V iQP48080A025V
Input
Voltage
36-75V
36-75V
Output
Voltage
3.3V
2.5V
Output
Current
70A
80A
Efficiency
70%Load
92.5%
90.5%
Efficiency
100%Load
91.5%
89%
Typical Performance
Input Characteristics
Operating input range
Transient input voltage
Turn-on voltage
Turn-off voltage
Maximum input current
Output Characteristics
Output voltage tolerance
Efficiency
Line regulation
Load regulation
Start-up time
Output voltage adjustment
Output ripple
Dynamic response
Transient voltage
Recovery time
Ripple frequency
Protection
Output over-current
Short circuit
Output over-voltage
Thermal shutdown
Environmental
Operating temperature, Tc
36-75V
100V
34.4V
32.3V
8 A
+/- 3.3% max
89% to 91.5%
1 mV
1 mV
25 ms
80%-110%
25 - 40 mVp-p
150 – 200 mV
500 - 650 µS
270 kHz
110% of Io,rated
Continuous protection
121% of Vout,nom
126C
-40C to 119C
100mS max
Input 0-75V, Io,max
Over line, load, and temp to end of life
Io,max
Over rated input
Over rated load
On/Off to 90% Vo
%Vo,nom
20MHz bandwidth
Load step 25% of
Io,max slew rate =0.1A/us
Fixed
Auto-recovery hiccup
Auto-recovery hiccup
Latching
Auto recovery with hysteresis
See full datasheet
©2001 Innoveta TM Technologies, Inc. 10/19/2001
1/2
Product Brief: Powereta™ – Single Output High Current Double-P Quarter Brick
Dimensions are in mm [in]. Unless otherwise specified tolerances are: x.x ± 0.5 [0.02], x.xx ± 0.25 [0.010].
1.02 [.040] DIA Pins
1.78 [.070] DIA Stand-offs
4 Pins
1
2
10 9
8
7
6
3
3.40 [0.134] max Dia
2 places
4 5
1.02 [.040] DIA
2 pins
1.52 [.060] DIA
4 pins
M3 X .5 threaded inserts, 2 places
Recommended hole pattern (top view)
PIN FUNCTION PIN FUNCTION
1
2
3
Vin (+)
On/Off
Vin (-)
4
5
6
7
8
9
Vo (-)
Vo (-)
Sense (-)
Trim
Sense (+)
Vout (+)
10 Vout (+)
Ordering Information
Product
Identifier
Package
Size
Platform Input
Voltage
Output
Current
Output
Units
Output
Voltage
# of
Outputs
Safety
Class
Feature Set i Q P 48 70 A 033 V - 0
TDK Innoveta
Quarter-
Brick
Double-P 36-75V
070 – 70A
080 – 80A
Amps
033 – 3.3V
025 – 2.5V
Single
05
05 – Standard
TDK Innoveta Inc.
3320 Matrix Drive, Suite 100
Richardson, Texas 75082
Phone (877) 498-0099 Toll Free
(469) 916-4747
Fax (877) 498-0143 Toll Free
(214) 239-3101 [email protected]
http://www.tdkinnoveta.com/
©2001 Innoveta TM Technologies, Inc.
Feature Set
00
01
02
03
04
05
06
07
08
09
On/Off Logic
Positive
Negative
Positive
Negative
Positive
Negative
Positive
Negative
Positive
Negative
OVP
Latch
Latch
Latch
Latch
Latch
Latch
Non-Latch
Non-Latch
Latch
Latch
Pin Length
0.145”
0.145”
0.110”
0.110”
0.200”
0.200”
0.145”
0.145”
0.180”
0.180”
Information furnished by TDK Innoveta is believed to be accurate and reliable. However, TDK Innoveta assumes no responsibility for its use, nor for any infringement of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TDK Innoveta. TDK Innoveta components are not designed to be used in applications, such as life support systems, wherein failure or malfunction could result in injury or death. All sales are subject to TDK Innoveta’s Terms and Conditions of Sale, which are available upon request. Specifications are subject to change
10/19/2001
2/2
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement