Tech Craft XLN48 Assembly Instruction


Add to my manuals
7 Pages

advertisement

Tech Craft XLN48 Assembly Instruction | Manualzz

150 lbs

40 lbs

20-3/4"(527mm)*19-1/2"(495mm)

Model/Modèle/Modelo

XLN48

rev. 00.R1

IMPORTANT CUSTOMER SERVICE INFORMATION / IMPORTANT INFORMATION DE NOTRE SERVICE À LA CLIENTÈLE /

INFORMACIÓN IMPORTANTE SOBRE SERVICIO AL CLIENTE INCLUIDA

THIS ASSEMBLY INSTRUCTION IS REQUIRED TO VALIDATE THE

WARRANTY

AND FOR ANY REQUEST TO THE CUSTOMER SERVICE.

CE MANUEL D’INSTRUCTION EST REQUIS POUR VALIDER LA

GARANTIE

ET POUR TOUTE DEMANDE AU SERVICE À LA CLIENTÈLE.

ESTA MANUAL DE INSTRUCCIÓN ES REQUERIDA PARA VALIDARLE LA

GARANTÍA

Y PARA TODA PETICIÓN EL SERVICIO AL CLIENTE.

Thank you for your purchase of this product.

To enhance your purchase and secure your warranty, please review these important notes.

Merci d’avoir acheté un de nos produits.

Pour améliorer votre achat et sécuriser votre garantie,

veuillez lire attentivement ces notes.

Gracias por la compra de este producto

Para mejorar su compra y asegurar su garantia, por favor revise estas notas importantes.

NOTES ON CUSTOMER SERVICE & PARTS

Please examine ALL packaging materials before discarding.

Shortages can occur by leaving parts in the packing material.

If any parts are missing or damaged, please review the parts

LIST found in the Assembly Manual, identify the missing or damaged part, and go to

www.techcraft.net

Please have the following information ready when you contact us:

1) The model and revision numbers of the product (found on the cover of the Assembly Manual, on the back panel label or under the box)

2) The name and address of the location where you purchased this product

3) The Ten-Digit Production PO number (found either on the back panel label, inside the instruction sheet or on the shipping box)

4) The Serial Number of the product (if there is one) which can also be found on the back panel label

5) A list of the part numbers of missing or damaged parts.

À PROPOS DU SERVICE À LA CLIENTÈLE :

S.V.P. Bien regarder à l’intérieur de l’emballage, AVANT DE LE

JETTER OU DE LE RECYCLER. Il se pourrait qu’il reste encore des pièces requises pour l’assemblage. Si, par erreur, une pièce serait manquante ou défectueuse, prière de l’identifier avec

www.techcraft.net

Avant de nous contacter, ayez à la portée de la main les informations suivantes:

1) Les numéros de modèle et de révision du produit (situé sur la page couverture de votre manuel d’instruction, sur l’étiquette à l’arrière du meuble ou sous la boîte).

2) Le nom et l’adresse de l’endroit où le produit a été acheté.

3) Le numéro de code “PO” à dix (10) chiffres (situé sur l’étiquette à

l’arrière du meuble, dans le manuel ou sur le carton d’emballage).

4) Le numéro de série indiqué sur l’étiquette à l’arrière du meuble ou sur le carton d’emballage (s’il y a lieu).

5) La ou les numéro(s) de pièce endommagée(s) ou manquante(s).

NOTAS SOBRE PIEZAS Y SERVICIO A LA CLIENTELA :

Por favor, examine TODOS los materiales de empaque antes de destruirlos. La falta de piezas puede ocurrir si se dejan dentro del material de empaque que se encuentra en el manual de instrucciones, identifique la pieza dañada ò que hace falta y vaya a

www.techcraft.net

Antes de ponemos en contacto, por favor tenga listas las informaciones siguientes:

1) Los Números de Modelo y de revisión del producto (se encuentra en la portada del manual de instrucciones, en la etiqueta del panel trasero ò bajo la caja).

2) El nombre y dirección del lugar donde compró este producto.

3) Los diez digitos del número de PO (se encuentra ya sea en la etiqueta del panel trasero del mueble ò en la caja de cartón).

4) El Número de Serie del producto (si lo hay) que también se puede encontrar en la etiqueta del panel trasero del mueble.

5) Una lista de los números de las piezas dañadas ò faltantes.

3

4

9

2

1

8

ALREADY INSTALLED

DÉJÀ INSTALLÉ

YA INSTALADO

CY00002

( ADJUSTABLE GLIDE - PATIN ADJUSTABLE - Pata adjustable)

3

4

1

2

7

8

5

6

KEY

CLÉ

CVE

9

PART NAME / NOM DE LA PIÈCE / NOMBRE DE LA PIEZA

LEFT GABLE / PANNEAU LATÉRAL GAUCHE / Panel lateral izquierdo

RIGHT GABLE / PANNEAU LATÉRAL DROITE / Panel lateral derecho

TOP SHELF / TABLETTE SUPÉRIEURE / Tabla superiore

INTERIOR GABLES / PANNEAUX INTERIÉURS / Panels interiors

FRONT FRAME / CHÂSSIS D'AVANT / Armazón delante

BACK FRAME / CHÂSSIS ARRIERE / Armazón trasero

LOOSE SHELVES / TABLETTES AJUSTABLES / Tablas adjustables

BOTTOM LEFT SHELF / TABLETTE INFERIÉURE GAUCHE / Tabla inferiore lzquierdo

BOTTOM (RIGHT) SHELF / TABLETTE INFERIÉURE (DROITE) / Tabla inferiore (derecha)

QTY

QTÉ

CANT

8

5

HARDWARE KIT / KIT DE QUINCAILLERIE / EQUIPO DE HARDWARE: CYKXLN4800

PART NAME / NOM DE LA PIÈCE / NOMBRE DE LA PIEZA

SHELF SUPPORT PINS / SUPPORT À TABLETTE / Soporfe a tabla

ADJUSTABLE GLIDES / PATINS ADJUSTABLES / Patas adjustables

PART No

No PIÈCE

PARTE No

CY00001

CY00002

1

1

1

2

1

1

1

QTY

QTÉ

CANT

1

1

XLN48

PART No

No PIÈCE

PARTE No

CYWGX0001-EX

CYWGX0002-EX

CYWTP0001-EX

CYWGI0001-EX

CYWFA0001-EX

CYWBK0001-EX

CYWSL0001-EX

CYWBT0001-EX

CYWBT0002-EX

HOW TO CLEAN :

Do not place this product near a heat source, such difficult to remove, use a cloth moistened with a mild non-abrasive detergent solution.

Do not use scouring powder, abrasive pad or solvent.

ENTRETIEN : tel qu’un calorifère ou directement au soleil.

Utilisez toujours un chiffon humide pour nettoyer le meuble.

avec un savon non-abrasif.

Ne pas utiliser de poudre à récurer, de tampon abrasif ni de solvant.

LIMPIEZA : tales como un radiador ò directamente bajo la luz del sol.

Limpie el producto periódicamente con un paño suave.

resultan dificiles de quitar, utilice un paño húmedecido con una solución de detergente suave sin corrosivos.

PO #: 4500009544

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement