Toro Pro Sweep (07066) Specifications

Pro Sweep®
A productive tow behind turf sweeper that easily collects cores, grass clippings, leaves and other turf debris. Operated with a hand-held
wireless RF remote controller.
PRO SWEEP, MODEL 07066*
POWER REQUIREMENTS
CONTROL
Utility vehicle with 8 gpm (30.3 liters/min.) @ 2000 psi, or tractor with a minimum of 25 hp (18.6 kW). Workman® HD Series vehicles require the high-flow
hydraulics kit.
Handheld wireless RF controller provides capability to hydraulically off-set the sweeper from transport to sweep position, raise the sweeper to a turn-around height,
and fully raise the sweeper to dump the collected debris.
SWEEPING WIDTH
52" (132 cm)
HOPPER CAPACITY
25 cu. feet (7.62 cu. meters)
COLLECTION SYSTEM
BRUSH SPEED
ROLLER
HITCH
HYDRAULIC CONNECTION
TRANSPORT POSITION
SWEEP POSITION
TRACTION
GROUND FOLLOWING
LIFT
TIRES
DIMENSIONS
WEIGHT
WINDROW KIT
OPTIONS
WARRANTY
Hydraulic-powered rotary brush.
Forward sweeping speed 0-4 mph (0-6.4 km/h), infinitely variable (recommended speed 3 mph (4.8 km/h).
Forward transport speed with hopper in transport down position 0-15 mph (0-24 km/h).
6" (15.2 cm) diameter full-width roller directly behind rotary brush. Adjustable height.
.75" (1.9 cm) hitch pin with safety linchpin.
8 gpm (30.3 liters/min.) @ 2000 psi max (3600 rpm high idle), dual quick couplers with 2-hose connection, dash-mounted
ON/OFF switch.
Tow sweeper directly behind or offset to the side of the vehicle.
Off-set to the left side of the tow vehicle.
Pivoting sub frame allows for positive tongue weight.
Floating brush housing.
Hydraulic powered lift cylinder. High-lift.
26.5 x 14-12 (67.3 x 35.6-30.5 cm)
Height: 68" (173 cm), Length: 145" (368 cm), Width: 87" (221 cm), Dump Height Clearance: 68" (173 cm).
1,512 lbs. (686 kgs) empty.
Standard.
Brake kit, wheel scrapers, adjustable jack stand.
2-year, comprehensive.
*Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
101
The Pro Swwep is manufactured
in Tomah, WI ISO 9002 Certified Plant.