Toro Sand Pro 2020 (08884) Specifications

Sand Pro/Infield Pro 2020 Specifications*
®
SAND PRO/INFIELD PRO 2020, MODEL 08884
ENGINE
AIR CLEANER
SYSTEM
FUEL CAPACITY
TRACTION DRIVE
Vanguard , V-twin cylinder, 4-cycle, OHV, air-cooled, gas engine with cast iron sleeves. 16 hp (11.9 kW) at 3600 rpm. Displacement:
29.3 cu. in. (480 cc). Oil capacity: 1.75 quart (1.66 liter). Electronic ignition. Full pressure lubrication, oil filter.
®
Double air filtration, standard engine air filter plus remote mounted 3-phase Donaldson air cleaner.
®
4.25 gallon (16.1 liter) of unleaded gasoline.
Direct driven hydrostatic variable displacement piston pump to 2 hydraulic motors for 2WD. Large engine intake hydraulic cooler.
Foot pedal control, forward/reverse.
GROUND SPEED
Infinitely variable 0-11 mph (17.7 km/h) forward; 4 mph (6.9 km/h) reverse.
HYDRAULIC OIL
3 gallon (11.4 liter) system capacity. Nylon reservoir to reduce corrosion. 10 micron (nominal) replaceable cartridge.
TIRES/WHEELS
MAIN FRAME
BRAKES
STEERING
CONTROLS/GAUGES
SEAT
ELECTRICAL
FEATURES
SOUND LEVEL
DIMENSIONS
WEIGHT
WARRANTY
Three 22 x 11.00-8 pneumatic tubeless tires on demountable, interchangeable wheels. Tire pressure: 4-6 psi (27.5 kPa).
Smooth tire, sports field tire.
Tricycle vehicle with welded tubular steel frame construction. Mid-engine placement. Removable refuse box.
Dynamic braking through the hydrostatic transmission and hand activated drum brakes mounted on each rear wheel.
Manual front wheel steering. 15" (38 cm) diameter steering wheel.
Hand operated choke, throttle, and hydraulic control for raising/lowering with float. Foot pedal controls traction forward/reverse
speed. Gauges: hour meter.
High-back cushion seat w/drain hole. 4" front-back adjustment w/additional 1.75" mounting adjustment (arm rests optional).
12-volt battery, 280 CCA, 12-volt electric starter. Dash mounted ignition switch with key. Neutral interlock switch, seat switch,
parking break switch. Also provisions for light kit.
82 dB(A) under normal operating conditions.
Width
58"
(147 cm)
Length
76"
(193 cm)
Wheelbase
41.25"
(105 cm)
Net weight (full fluids): 650 lbs. (295 kg)
Two-year limited warranty. Refer to the Operator’s Manual for further details. Briggs & Stratton provides a two-year commercial
engine warranty and a lifetime Magnetron® warranty.
®
*Specifications and design subject to change without notice.
79
Height
45"
(114 cm)
Sand Pro /Infield Pro 2020 Specifications* (continued)
®
®
SAND PRO/INFIELD PRO ATTACHMENTS & ACCESSORIES
TOOTH RAKE, 08812
SPRING RAKE, 08813
72" (183 cm) width, with 3 rake sections, 27 prongs adjustable for depth and wear. Adjustable trowels, drawbar position for
variable aggressiveness. Hydraulically raised for transport. Weights available for drag sections.
76" (193 cm) width, with 5 individual rake heads. Hydraulically raised for transport.
WEEDER/CULTIVATOR,
08815
38" (97 cm) width, with 5 sets of double shovels. Mounted close to rear wheels for improved ground following and reduced
gouging. Hydraulically lowered, spring raised. Operates independently of Tooth Rake and Spring Rake.
DOZER BLADE, 08821
40" (102 cm) width, reversible blade. Loop handle for blade control with either hand. Transport lock-up with handle storage
position. Side-to-side flex design for improved ground following. Optional 60" (152 cm) Blade also available.
DRAG MAT, 08850
SPIKER, 08856
TURF TIRE, 95-5849
6.5' x 6' (1.9 m x 1.8 m) Keystone drag mat with transport stands. Used in conjunction with Hitch Kit to drag greens and tees.
Description: Spiker consists of 2 units each with 12 spiker blades and 11 hold down fingers. Each unit floats independently of the
other and is hydraulically pressured into the ground and allowed to float up and down by means of a spring.
Blade: High carbon steel, .105" (.26 cm) thick. Special profile design for minimum disturbance of soil surface when spiking,
73/4 dia. (1.9 cm).
Specifications:
Weight:
280 lbs. (127 kg)
Unit Working Width:
57.6" (146 cm)
Working Depth:
1.25" (3.2 cm), max.
Working lbs./Blade:
23.1 lbs. (10.5 kg)/blade
Blade Spacing:
2.4" (6.1 cm)
22 x 11.00-8. Tire pressure: 4-6 psi (27.5 kPa).
FINISH GRADER,
08867
Consists of bar plow and scarifier. Adept at light ground maintenance and grooming. Hydraulically raised and lowered, with spring
loading to regulate down pressure.
Dimensions:
Weight:
200 lbs. (91 kg)
Length:
10" (25 cm)
Width:
66" (168 cm)
Height:
10" (25 cm)
CYCLONE™ 1000
BLOWER, 08857
2100 rpm fan generating 2850 cfm. PTO drive with single B section drive belt. Quick-attach with two pins and connect drive shaft.
Clutch: Lever engagement back side belt tensioner. Weight 180 lbs. (82 kg).
*Specifications and design subject to change without notice. Products depicted in this literature are for
demonstration purposes only. Actual products offered for sale may vary in design, required attachments
and safety features. Consult your local Toro Distributor.
The Sand Pro 2020 are manufactured
in Tomah, WI ISO 9002 Certified Plant.
“Vanguard” and “Magnetron” are registered trademarks of the Briggs & Stratton Corporation.
“Donaldson” is a registered trademark of the Donaldson Company.
**Must be used in conjunction with Finish Grader (08867).
80