Quanzhou Truest Communication TC-271 Specifications

我校最新 EI 工程索引收录学术成果
(以第一著者音序排序)
20130105 新增 9 条
1.
Accession number:
20125215842982
Title:
Wentzel-Kramers-Brillouin solution of cut-off frequency for horizontal shear (SH)
waves in various inhomogeneous thin films
Authors:
Cao, Xiaoshan1 ; Shi, Junping1 ; Jin, Feng2/曹小杉;师俊平;金峰
Author affiliation:
1
Department of Engineering Mechanics, School of Civil Engineering and Architecture, Xian
University of Technology, China
2
MOE Key Laboratory for Strength and Vibration, Xian Jiaotong University, China
Corresponding author:
Cao, X. (caoxsh@yahoo.com.cn)
Source title:
Philosophical Magazine Letters
Abbreviated source title:
Philos Mag Lett
Volume:
93
Issue:
1
Issue date:
January 1, 2013
Publication year:
2013
Pages:
34-41
Language:
English
ISSN:
09500839
E-ISSN:
13623036
CODEN:
PMLEEG
Document type:
Journal article (JA)
Publisher:
Taylor and Francis Ltd., 4 Park Square, Milton Park, Abingdon, Oxfordshire,
OX14 4RN, United Kingdom
Abstract:
The Wentzel-Kramers-Brillouin method is employed to study the cut-off
frequencies of the horizontal shear waves in a freestanding functionally graded
piezoelectric-piezomagnetic material film with the electrically and magnetically open boundary
conditions. An analytical solution, which could be used in analyzing the problems of various
functionally graded materials, is proven to have high precision by analytical analysis and a
numerical example. The results reveal that the set of cut-off frequencies is a series of
approximate arithmetic progressions. A theoretical foundation based on the relationship
between the cut-off frequencies and the materials gradient property is established for
nondestructive evaluation. © 2013 Taylor & Francis Group, LLC.
Number of references:
15
Main heading:
Shear flow
Controlled terms:
Beams and girders - Functionally graded materials Nondestructive examination - Numerical analysis
Uncontrolled terms:
Analytical analysis - Arithmetic progressions - Functionally
graded - High precision - Horizontal shear - Inhomogeneous thin films - Non
destructive evaluation - Numerical example - Open boundary condition - Theoretical
foundations
- Wentzel-Kramers-Brillouin method
Classification code:
408.2 Structural Members and Shapes - 415 Metals, Plastics, Wood
and Other Structural Materials - 421 Strength of Building Materials; Mechanical Properties 921.6 Numerical Methods
DOI:
10.1080/09500839.2012.729958
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number:
20130315909831
Title:
In situ preparation and mechanical properties of CNTs/MCMBs composites
Authors:
Cheng, Youliang1, 2 ; Li, Tiehu2 ; Fang, Changqing1 ; Liu, Pei1 ; Yu, Ruien1 ; Hu,
Jingbo1/程有亮;李铁虎;方长青;刘佩;于瑞恩;胡京博
Author affiliation:
1
School of Printing and Packaging Engineering, Xi'An University of Technology, No. 5 South
Jinhua Road, Xi'an 710048, Shaanxi, China
2
School of Materials Science and Engineering, Northwestern Polytechnical University, No. 127
West Youyi Road, Xi'an 710072, Shaanxi, China
Corresponding author:
Fang, C. (fcqxaut@163.com)
Source title:
Composites Part B: Engineering
Abbreviated source title:
Compos Part B: Eng
Volume:
47
Issue date:
April 2013
Publication year:
2013
Pages:
290-297
Language:
English
ISSN:
13598368
CODEN:
CPBEFF
Document type:
Journal article (JA)
Publisher:
Elsevier Ltd, Langford Lane, Kidlington, Oxford, OX5 1GB, United Kingdom
Abstract:
By adding carbon nanotubes (CNTs) into medium temperature coal tar pitch,
mesocarbon microbeads (MCMBs) were obtained via thermal condensation, then CNTs/MCMBs
composites were in situ prepared using compression molding. The morphology, structure and
mechanical properties of CNTs/MCMBs composites were characterized by optical microscope,
digital camera, scanning electron microscope (SEM) and mechanical test machine. Results
showed that CNTs were used as the nucleating agent and could inhibit the growth and
coalescence of MCMBs. The optical textures of CNTs/MCMBs composites showed similar
characteristics to the thermal condensation products from coal tar pitch with CNTs. The mass
ratio of CNTs to coal tar pitch played an important role in the mechanical properties of
CNTs/MCMBs composites. The density and bending strength of CNTs/MCMBs composite first
increased and then decreased with the increase of the proportion of CNTs. When the proportion
of CNTs was 5 wt%, the density of the composite reached the maximum (1.76 g/cm3). In addition,
the bending strength of the composite reached the maximum (79.6 MPa) as adding 2 wt% CNTs
into coal tar pitch. © 2012 Elsevier Ltd. All rights reserved.
Number of references:
24
Main heading:
Mechanical properties
Controlled terms:
Bending strength - Carbon carbon composites - Coal tar Coalescence - Compression molding - Scanning electron microscopy - Surface analysis
Uncontrolled terms:
Coal tar pitch - Mass ratio - Mechanical tests - Medium
temperature - Mesocarbon microbeads - Nucleating agents - Optical microscopes Optical texture - Situ preparation - Thermal condensation
Classification code:
816.1 Processing of Plastics and Other Polymers - 801.3 Colloid
Chemistry - 741.1 Light/Optics - 951 Materials Science - 423 Non Mechanical
Properties and Tests of Building Materials - 415.4 Structural Materials Other Than Metal,
Plastics or Wood - 411.2 Coal Tar - 421 Strength of Building Materials; Mechanical
Properties
DOI:
10.1016/j.compositesb.2012.11.009
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number:
20125215845172
Title:
Adaptive particle swarm optimization algorithm and its application
Authors:
Feng, Lei1 ; Wei, Wei2/冯磊;魏嵬
Author affiliation:
1
Department of Information Engineering, Shaanxi Polytechnic Institute, Shaanxi, Xian'yang,
712000, China
2
School of Computer Science and Engineering, Xi'an University of Technology, Xi'an, 710048,
China
Corresponding author:
Feng, L.
Source title:
Journal of Software Engineering
Abbreviated source title:
J. Softw. Eng.
Volume:
6
Issue:
3
Issue date:
2012
Publication year:
2012
Pages:
41-48
Language:
English
ISSN:
18194311
E-ISSN:
21520941
Document type:
Journal article (JA)
Publisher:
Academic Journals Inc., 244, 5th avenue, No. 2218, New City, NY 10001,
United States
Abstract:
The basic theories of Particle Swarm Optimization (PSO) is introduced and
illustrated with flowchart. In this study one of its improved algorithms Adaptive Particle Swarm
Optimization (APSO) is introduced. Characteristics of basic PSO algorithms are outlined. Some
methods of APSO at present were introduced and analyzed with their parameters. Limitation of
these APSO algorithms was analyzed. Pointed out that APSO algorithms can be improved with
adjustment of parameters and some other hybrid APSO are referred. Finally, pointed out
application of PSO needs to be extended, hybrid with other algorithms is thought a good way to
improve APSO algorithm and applying the improved algorithm to complex problems is the goal of
our study. © 2012 Academic Journals Inc.
Number of references:
30
Main heading:
Algorithms
Controlled terms:
Artificial intelligence - Evolutionary algorithms - Particle swarm
optimization (PSO)
Uncontrolled terms:
Adaptive particle swarm optimization algorithm - Adaptive
particle swarm optimizations - Basic theory - Complex problems - PSO algorithms Swarm Intelligence
Classification code:
723 Computer Software, Data Handling and Applications - 723.4
Artificial Intelligence - 921 Mathematics
DOI:
10.3923/jse.2012.41.48
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number:
20130615986368
Title:
Microstructure evolution of Mo-Si-Al system during self-propagation
high-temperature synthesis
Authors:
Jia, Lei1 ; Xie, Hui1, 2 ; Lu, Zhen-Lin1 ; Zhang, Chao1/贾磊;谢辉;吕振林;张超
Author affiliation:
1
School of Materials Science and Engineering, Xi'An University of Technology, Xi'an 710048,
China
2
Xi'an Aeronautical University, Xi'an 710077, China
Corresponding author:
Jia, L. (xautjialei@hotmail.com)
Source title:
Journal of Alloys and Compounds
Abbreviated source title:
J Alloys Compd
Volume:
554
Issue date:
March 25, 2013
Publication year:
2013
Pages:
127-131
Language:
English
ISSN:
09258388
CODEN:
JALCEU
Document type:
Journal article (JA)
Publisher:
Elsevier Ltd, Langford Lane, Kidlington, Oxford, OX5 1GB, United Kingdom
Abstract:
The microstructure and phase constitution of Mo(Si1- x, Alx)2 alloys (x = 0.03, 0.1
and 0.4) prepared by self-propagation high-temperature synthesis is first investigated using SEM,
EDS and XRD analysis. Then the lattice parameters and adiabatic temperature are calculated.
Based on the above experimental and calculated results, the variation mechanism of diffraction
peaks and phase transformation subsequence of the Mo-MoO3-Si-Al powders is discussed.
Results show that, when the self-propagation reaction is over, there are a homogeneous Mo-Si-Al
alloy melt and a fused Al2O3 with lower density at top. Subsequently, MoSi2 or Mo(Si, Al)2 phase
nucleates and grows as a primary phase in the Mo-Si-Al alloy melts, and then Al, Si substances
are generated from the intergranular residual Al-Si liquid according to Al-Si binary phase diagram.
The Al increase in the starting powder mixtures leads to the Al concentration increase in the
Mo-Si-Al alloy melt. Consequently, MoSi2 is transformed to Mo(Si, Al)2 to phase in which Si is
replaced by Al atoms and Al substance in the intergranular zones increased accordingly. © 2012
Elsevier B.V. All rights reserved.
Number of references:
19
Main heading:
Aluminum
Controlled terms:
Intermetallics - Microstructure - Molybdenum - Molybdenum
oxide - Phase diagrams - Phase transitions - Silicon - Silicon alloys - Synthesis
(chemical) - Textures
- X ray diffraction
Uncontrolled terms:
Adiabatic temperature - Al-concentration - Al-Si liquid Alloy melt - Binary phase diagrams - Diffraction peaks - Intergranular - Lower
density - Microstructure evolutions - Phase constitution
- Primary phase Self-propagation high-temperature synthesis - Selfpropagation - Starting powders Variation mechanisms - XRD analysis
Classification code:
933.1.1 Crystal Lattice - 933 Solid State Physics - 804 Chemical
Products Generally - 802.2 Chemical Reactions - 701 Electricity and Magnetism - 549.3
Nonferrous Metals and Alloys excluding Alkali and Alkaline Earth Metals - 543.3 Molybdenum
and Alloys - 541.1 Aluminum - 531 Metallurgy and Metallography
DOI:
10.1016/j.jallcom.2012.11.124
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number:
20125215835888
Title:
Analysis of the impact of plasma sheath on GPS antenna
Authors:
Jiang-Fan, Liu1 ; Guo-Bin, Wan1 ; Jin-Sheng, Zhang2 ; Xiao-Li, Xi3/刘江凡;万国宾;
张金生;席晓莉;
Author affiliation:
1
Northwestern Polytechnical University, Xi'an, 710072, China
2
High-Tech Institute, Xi'an, 710025, China
3
Xi'an University of Technology, Xi'an 710048, China
Corresponding author:
Jiang-Fan, L. (liujiangfan123@163.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
229-231
Monograph title:
Mechanical and Electrical Technology IV
Issue date:
2012
Publication year:
2012
Pages:
1614-1617
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855102
Document type:
Conference article (CA)
Conference name:
4th International Conference on Mechanical and Electrical Technology,
ICMET 2012
Conference date:
July 24, 2012 - July 26, 2012
Conference location:
Kuala Lumpur, Malaysia
Conference code:
94581
Sponsor:
Science and Engineering Institute; Universiti Putra Malaysia
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
The electromagnetic simulation software CST was used to analyze the effects of
reentry plasma sheath on the GPS navigation antenna. The Impedance and radiation
characteristics of antenna were studied on condition that the antenna was coated with uniform
and nonuniform electron density distribution plasma sheath respectively. The results show that,
the antenna coated with the uniform plasma sheath, the plasma electron density increasing, the
antenna operating frequency moves to high-frequency and that the directivity decreases as well;
when the antenna was coated with nonuniform plasma, with the higher electron peak density of
plasma sheath, besides that the operating frequency also moves to high-frequency, the
bandwidth stretches wide and the return loss reduces; the antenna radiation pattern distorts
seriously at the electron peak density of 1018m-3. © (2012) Trans Tech Publications, Switzerland.
Number of references:
11
Main heading:
Antennas
Controlled terms:
Directional patterns (antenna) - Plasma sheaths
Uncontrolled terms:
Directivity - Electromagnetic simulation - Electron peak GPS antenna - GPS navigation - High frequency HF - Nonuniform plasma Operating frequency - Plasma electron density - Radiation characteristics
- Return
loss
Classification code:
716 Telecommunication; Radar, Radio and Television - 932.3 Plasma
Physics
DOI:
10.4028/www.scientific.net/AMM.229-231.1614
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number:
20125215834591
Title:
Numeric alanalysis of size effect on mesol concrete random aggregate model
Authors:
Liang, Xinyu1 ; Dang, Faning1/梁昕宇;党发宁
Author affiliation:
1
College of Civil Engineering and Architecture Xi'an University of Technology, Xi'an 710048,
Shaanxi Province, China
Corresponding author:
Liang, X. (Key_xinyu@163.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
226-228
Monograph title:
Vibration, Structural Engineering and Measurement II
Issue date:
2012
Publication year:
2012
Pages:
1780-1784
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855072
Document type:
Conference article (CA)
Conference name:
2012 International Conference on Vibration, Structural Engineering and
Measurement, ICVSEM 2012
Conference date:
October 19, 2012 - October 21, 2012
Conference location:
Shanghai, China
Conference code:
94580
Sponsor:
Guangzhou University; Cleveland State University; Xi'an Jiaotong University; Tongji
University; The Hong Kong Polytechnic University; et al
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
In order to research that statics properties of concrete cylinder sample are
influenced by micro-concrete material heterogeneity, by random aggregate models generated by
different random number were established. By fixed aggregate size and constantly changing of
the sample size, the concrete numerical model was simulated and Strength change of concrete
samples was analyzed.So that strength influence of the aggregate location of the concrete
random sample was study. Calculation shows that: the strength of concrete has been little effect
by the aggregate random location, the size effect on concrete has been changed regularly, with
the size effect ratio coefficient of aggregate and sample gradually increasing, the error square
sum of strain was reduced and the brittlness of the samples becomes obvious. © (2012) Trans
Tech Publications, Switzerland.
Number of references:
7
Main heading:
Aggregates
Controlled terms:
Compressive strength - Random number generation - Size
determination - Structural design
Uncontrolled terms:
Aggregate size - Concrete cylinders - Concrete samples Material heterogeneity - Random aggregate model - Random location - Random
Numbers - Random sample - Sample sizes - Size effects
- Square sum Strength of concrete
Classification code:
406 Highway Engineering - 408.1 Structural Design, General - 421
Strength of Building Materials; Mechanical Properties - 922.2 Mathematical Statistics 943.3 Special Purpose Instruments
DOI:
10.4028/www.scientific.net/AMM.226-228.1780
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number:
20125215843110
Title:
Coupling of level set and meshless method and its application to crack propagation
Authors:
Ma, Wen-Tao1, 2 ; Shi, Jun-Ping1 ; Li, Ning1/马文涛;师俊平;李宁
Author affiliation:
1
School of Civil Engineering and Architecture, Xi'an University of Technology, Xi'an 710048,
China
2
School of Mathematics and Computer Science, Ningxia University, Ningxia 750021, China
Corresponding author:
Ma, W.-T. (wt-ma2002@163.com)
Source title:
Yantu Lixue/Rock and Soil Mechanics
Abbreviated source title:
Rock Soil Mech
Volume:
33
Issue:
11
Issue date:
November 2012
Publication year:
2012
Pages:
3447-3453
Language:
Chinese
ISSN:
10007598
Document type:
Journal article (JA)
Publisher:
Academia Sinica, Wuhan, 430071, China
Abstract:
A new method which couples the level set method with meshless method to
simulate crack growth is presented. The coupling of level set and meshless method can achieve
naturally because they all set up based on the discrete nodal data. Two level sets that are
orthogonal to one another at the crack tip are used to represent the geometry of crack and the
location of crack tip, and to construct the Heaviside skip function and the Westergaard enriched
function near the crack tip in the element-free Galerkin method (EFGM) discontinuous
approximation. New crack tips are defined by the update algorithm of level set easily when the
crack is growing. The coupling method does not use the visibility method, the diffraction method
or the transparency method. The √r singularity is reproduced very well; and the convergence
for elastic problems is improved. The passage of crack has no influence on the nodal domain.
Smaller domain is used to calculation, which keeps the band and sparsity of the over all stiffness
matrix. In addition, the level set makes the selection of enriched nodes and the establishment of
additional function simply; and its update process needs no evolution equations. The numerical
results show that the presented method has higher computational accuracy; and the simulated
expanding path of crack is coincided with the tested curve. So, the results verify the validity and
accuracy of the presented method.
Number of references:
17
Main heading:
Numerical methods
Controlled terms:
Computational mechanics - Crack propagation - Crack tips Cracks - Drop breakup - Level measurement - Orthogonal functions - Stiffness
matrix
Uncontrolled terms:
Computational accuracy - Coupling methods - Diffraction
methods - Discontinuous approximation - Elastic problems - Element-free Galerkin
method - Evolution equations - Heaviside - Level Set - Level Set method
Mesh-less methods - Nodal domain - Numerical results - Process needs
Classification code:
421 Strength of Building Materials; Mechanical Properties - 921
Mathematics - 921.6 Numerical Methods - 931.2 Physical Properties of Gases, Liquids and
Solids - 943.2 Mechanical Variables Measurements
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number:
20125215835374
Title:
P2P-oriented manufacturing resource modeling and sharing system for virtual
enterprises
Authors:
Wang, Xue-Long1, 2 ; Zhang, Jing1/王学龙;张璟
Author affiliation:
1
School of Computer Science and Engineering, Xi'an University of Technology, China
2
School of Computer Science, Xi'an Shiyou University, China
Corresponding author:
Wang, X.-L. (xlwang@xsyu.edu.cn)
Source title:
International Journal of Digital Content Technology and its Applications
Abbreviated source title:
Int. J. Digit. Content Technol. Appl.
Volume:
6
Issue:
22
Issue date:
2012
Publication year:
2012
Pages:
666-675
Language:
English
ISSN:
19759339
E-ISSN:
22339310
Document type:
Journal article (JA)
Publisher:
Advanced Institute of Convergence Information Technology, Myoungbo Bldg
3F,, Bumin-dong 1-ga, Seo-gu, Busan, 602-816, Korea, Republic of
Abstract:
Aimed at a large number of manufacturing resources sharing demand in virtual
enterprises, the existing classification and modeling methods of manufacturing resources are
analyzed. A classification method based on the form of resources existence is provided. The
graphic and formalism of manufacturing resources are described. Moreover, taking the document
resources as an example, a P2P sharing system prototype is realized based on the JXTA.
Experiment results show that the P2P overlay has fewer construction cost and better scalability.
And the model and the prototype system can solve the issues which are lack of the whole
description and practicality of the existing model.
Number of references:
9
Main heading:
Peer to peer networks
Controlled terms:
Classification (of information) - Manufacture - Models Virtual corporation
Uncontrolled terms:
Classification methods - Construction costs - Manufacturing
resource - P2P overlays - Peer to peer - Prototype system - Sharing - Sharing
systems - Virtual enterprise
Classification code:
537.1 Heat Treatment Processes - 716.1 Information Theory and
Signal Processing - 722 Computer Systems and Equipment - 902.1 Engineering Graphics
- 912.2 Management
DOI:
10.4156/jdcta.vol6.issue22.76
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number:
20130115869518
Title:
Impact of alpine meadow degradation on soil hydraulic properties over the
Qinghai-Tibetan Plateau
Authors:
Zeng, Chen1, 2, 3 ; Zhang, Fan1, 2 ; Wang, Quanjiu3, 4 ; Chen, Yingying1 ; Joswiak,
Daniel R.1/曾晨;;王全九;;;
Author affiliation:
1
Key Laboratory of Tibetan Environment Changes and Land Surface Processes, Institutes of
Tibetan Plateau Research, Chinese Academy of Sciences, Beijing 10085, China
2
Key Laboratory of Alpine Ecology and Biodiversity, Institutes of Tibetan Plateau Research,
Chinese Academy of Sciences, Beijing 10085, China
3
State Key Laboratory of Soil Erosion and Dryland Farming on the Loess Plateau, Institute of
Soil and Water Conservation, Chinese Academy of Sciences, Yangling 712100, China
4
Institute of Water Resources, Xi'an University of Technology, Xi'an 710048, China
Corresponding author:
Zeng, C. (zengchen@itpcas.ac.cn)
Source title:
Journal of Hydrology
Abbreviated source title:
J. Hydrol.
Volume:
478
Issue date:
January 25, 2013
Publication year:
2013
Pages:
148-156
Language:
English
ISSN:
00221694
CODEN:
JHYDA7
Document type:
Journal article (JA)
Publisher:
Elsevier, P.O. Box 211, Amsterdam, 1000 AE, Netherlands
Abstract:
Alpine meadow soil is an important ecosystem component of the Qinghai-Tibetan
Plateau. However, the alpine meadow soil is undergoing serious degradation mainly due to global
climate change, overgrazing, human activities and rodents. In this paper, spatial sequencing was
chosen over time succession sequencing to study the changes of soil hydraulic properties under
different degrees of alpine meadow degradation. Soil saturated hydraulic conductivity (Ks) and
Gardner α both at the surface and at 40-50. cm depth were investigated in the field using tension
infiltrometers. Soil physical and chemical properties, together with the root index at 0-10. cm and
40-50. cm soil layer depths were also analyzed. Pearson correlations were adopted to study the
relationships among the investigated factors and principal component analysis was performed to
identify the dominant factor. Results show that with increasing degree of degradation, soil sand
content increased while soil Ks and Gardner α as well as soil clay content, soil porosity decreased
in the 0-10. cm soil layers, and organic matter and root gravimetric density decreased in both the
0-10. cm and 40-50. cm soil layers. However, soil moisture showed no significant changes with
increasing degradation. With decreasing pressure head, soil unsaturated hydraulic conductivity
reduced more slowly under degraded conditions than non-degraded conditions. Soil Ks and
Gardner α were significantly correlated (P=0.01) with bulk density, soil porosity, soil organic
matter and root gravimetric density. Among these, soil porosity is the dominant factor explaining
about 90% of the variability in total infiltration flow. Under non-degraded conditions, the
infiltration flow principally depended on the presence of macropores. With increasing degree of
degradation, soil macropores quickly changed to mesopores or micropores. The proportion of
total infiltration flow through macropores and mesopores significantly decreased with the most
substantial decrease observed for the macropores in the 0-10. cm soil layer. The substantial
decrease of macropores caused a cut in soil moisture and hydraulic conductivity. This study
improves the understanding and prediction of alpine meadow soil and ecosystem changes and
provides guidelines for improving water flow modeling under the background of global climate
change over the Qinghai-Tibetan Plateau and similar regions. © 2012 Elsevier B.V.
Number of references:
57
Main heading:
Infiltration
Controlled terms:
Biogeochemistry - Biological materials - Chemical properties Climate change - Degradation - Ecosystems - Hydraulic conductivity - Mammals Organic compounds - Porosity
- Principal component analysis - Soil moisture
Uncontrolled terms:
Alpine meadow - AS-soils - Bulk density - Degree of
degradation - Dominant factor - Ecosystem components - Flowthrough - Global
climate changes - Gravimetric density - Human activities
- Hydraulic properties Macropores - Meso-pores - Micropores - Pearson correlation - Pressure heads Qinghai-Tibetan plateau - Sand content - Saturated hydraulic conductivity - Soil
hydraulic properties
- Soil layer - Soil organic matters - Soil physical and chemical
properties - Soil Porosity - Soil property - Tension infiltrometers - Unsaturated
hydraulic conductivity - Water flows
Classification code:
931.2 Physical Properties of Gases, Liquids and Solids - 922.2
Mathematical Statistics - 821 Agricultural Equipment and Methods; Vegetation and Pest
Control - 804.1 Organic Compounds - 802.2 Chemical Reactions - 801.2 Biochemistry
- 801 Chemistry - 632.1 Hydraulics - 483.1 Soils and Soil Mechanics - 461.2 Biological
Materials and Tissue Engineering - 454.3 Ecology and Ecosystems - 451 Air Pollution 423 Non Mechanical Properties and Tests of Building Materials
DOI:
10.1016/j.jhydrol.2012.11.058
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
20130112 新增 6 条
1.
Accession number:
20130115861363
Title:
A novel approach to impedance-based fault location for high voltage cables
Authors:
Bi, Taihang1 ; Yao, Lixiao2/;姚李孝
Author affiliation:
1
Department of Research and Development, XJ Electric Zhuhai, Nanping Technology Park, 12
Ping North Road 2 Middle, 519060 Zhuhai, Guangdong, China
2
Institute for Water Conservation and Hydroelectric Power, Xi'an University of Technology, 5
South Jinhua Road, 710048 Xi'an, Shaanxi, China
Corresponding author:
Bi, T. (bitaihang@gmail.com)
Source title:
Conference Record - IAS Annual Meeting (IEEE Industry Applications Society)
Abbreviated source title:
Conf Rec IAS Annu Meet
Monograph title:
2012 IEEE Industry Applications Society Annual Meeting, IAS 2012
Issue date:
2012
Publication year:
2012
Article number:
6374110
Language:
English
ISSN:
01972618
CODEN:
CIASDZ
ISBN-13:
9781467303309
Document type:
Conference article (CA)
Conference name:
2012 IEEE Industry Applications Society Annual Meeting, IAS 2012
Conference date:
October 7, 2012 - October 11, 2012
Conference location:
Las Vegas, NV, United states
Conference code:
94677
Publisher:
Institute of Electrical and Electronics Engineers Inc., 445 Hoes Lane / P.O. Box
1331, Piscataway, NJ 08855-1331, United States
Abstract:
This paper identifies the monotonic and linear relationship between transition
resistance and line impedance. Based on this concept, an algorithm is proposed to calculate the
reactance of transition resistance in different points of the transmission line, and search for the
fault location as that point where the reactance value is zero. This approach can eliminate the
effect of high resistance grounding and avoid some problems caused by the commonly used
modified iterative method. From the results of ATP simulation and dynamic model test, it can be
seen that the accuracy of fault location using this approach is significantly improved with respect
to that of the conventional impedance methods. © 2012 IEEE.
Number of references:
16
Main heading:
Electric lines
Controlled terms:
Electric fault location - Industrial applications - Transmission line
theory
Uncontrolled terms:
Dynamic model test - High resistance grounding - High
voltage cable - Impedance method - Line impedance - Linear relationships Transition resistance
Classification code:
706.1.1 Electric Power Transmission - 706.2 Electric Power Lines and
Equipment - 913 Production Planning and Control; Manufacturing
DOI:
10.1109/IAS.2012.6374110
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number:
20130115861268
Title:
Robust speed control of induction motor drives employing first-order
auto-disturbance rejection controllers
Authors:
Li, Jie1 ; Zhong, Yanru1/李洁;钟彦儒
Author affiliation:
1
School of Automation and Information Engineering, Xi'an University of Technology, No. 5,
Jinhua South Road, Xi'an, 710048, China
Corresponding author:
Li, J. (lijie@xaut.edu.cn)
Source title:
Conference Record - IAS Annual Meeting (IEEE Industry Applications Society)
Abbreviated source title:
Conf Rec IAS Annu Meet
Monograph title:
2012 IEEE Industry Applications Society Annual Meeting, IAS 2012
Issue date:
2012
Publication year:
2012
Article number:
6374013
Language:
English
ISSN:
01972618
CODEN:
CIASDZ
ISBN-13:
9781467303309
Document type:
Conference article (CA)
Conference name:
2012 IEEE Industry Applications Society Annual Meeting, IAS 2012
Conference date:
October 7, 2012 - October 11, 2012
Conference location:
Las Vegas, NV, United states
Conference code:
94677
Publisher:
Institute of Electrical and Electronics Engineers Inc., 445 Hoes Lane / P.O. Box
1331, Piscataway, NJ 08855-1331, United States
Abstract:
A novel ADRC control structure which employs only three first-order ADRCs is
presented for the speed control of induction motor drives, moreover, compared with the existing
ADRC based speed control structures there is no need to estimate the rotor flux. As a result, the
runtime of the proposed ADRC control algorithm is shorter than ever and the implementation of
it on DSPs is easier than ever. The simulation results show that the proposed control scheme still
can overcome the side-effects of internal disturbance and external disturbance, such as the load
disturbances, the motor's parameter variations and the modeling error etc. as good as other
robust control schemes which employ higher order ADRCs. Furthermore, a TMS320F2812 DSP
based prototype using the proposed control scheme was developed. The experimental results
show that the robustness of the proposed ADRC system are obviously better than the
conventional PI system when various disturbances occur, and the scheme is feasible and effective.
© 2012 IEEE.
Number of references:
15
Main heading:
Disturbance rejection
Controlled terms:
Algorithms - Control equipment - Electric drives - Induction
motors - Industrial applications - Robust control - Speed control
Uncontrolled terms:
Auto disturbance rejection controllers - Control schemes Control structure - Conventional PI - DSP-based - External disturbances First-order - Induction motor drive - Load disturbances - Modeling errors
Robust control scheme - Robust speed control - Rotor fluxes - Runtimes - Side
effect - TMS320F2812 - Vector controls
Classification code:
913 Production Planning and Control; Manufacturing - 732.1 Control
Equipment - 731.3 Specific Variables Control - 921 Mathematics - 731 Automatic
Control Principles and Applications - 705.3.1 AC Motors - 705 Electric Generators and
Motors - 723 Computer Software, Data Handling and Applications
DOI:
10.1109/IAS.2012.6374013
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number:
20130115864555
Title:
Research on a novel modulation technology for high-frequency link inverter
Authors:
Li, Jingang1, 2 ; Ma, Qingyuan1 ; Ding, Shaocheng1/李金刚;马庆媛;
Author affiliation:
1
Xi'an University of Technology, Xi'an, China
2
State Key Laboratory of Electrical Insulation and Power Equipment, Xi'an, China
Corresponding author:
Li, J. (lijingang@xaut.edu.cn)
Source title:
Proceedings of the 2012 7th IEEE Conference on Industrial Electronics and
Applications, ICIEA 2012
Abbreviated source title:
Proc. IEEE Conf. Ind. Electron. Appl., ICIEA
Monograph title:
Proceedings of the 2012 7th IEEE Conference on Industrial Electronics
and Applications, ICIEA 2012
Issue date:
2012
Publication year:
2012
Pages:
624-627
Article number:
6360801
Language:
English
ISBN-13:
9781457721175
Document type:
Conference article (CA)
Conference name:
2012 7th IEEE Conference on Industrial Electronics and Applications,
ICIEA 2012
Conference date:
July 18, 2012 - July 20, 2012
Conference location:
Singapore, Singapore
Conference code:
94705
Publisher:
IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC
20036-4928, United States
Abstract:
A novel control method for high-frequency link inverter is given in this paper. The
control principal is described in details, and the digital control signal generating method based on
DSP is analyzed. The experimental results indicated that the digital control method is simple
reliable and general, the output waveform of high-frequency link inverter is sine-wave, and the
switches of power circuit can be realized with soft switching. The experimental results proved the
control method is feasible. © 2012 IEEE.
Number of references:
4
Main heading:
Electric inverters
Controlled terms:
Digital control systems - Industrial electronics - Modulation Soft switching
Uncontrolled terms:
Control methods - Digital control - Digital control signals Double modulation - Generating methods - High-frequency link inverter - Novel
modulation - Output waveform - Power circuit - Sine-wave
Classification code:
722.4 Digital Computers and Systems - 718 Telephone Systems and
Related Technologies; Line Communications - 717 Optical Communication - 716
Telecommunication; Radar, Radio and Television - 715 Electronic Equipment, General Purpose
and Industrial - 714 Electronic Components and Tubes - 704.2 Electric Equipment
DOI:
10.1109/ICIEA.2012.6360801
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number:
20130115865326
Title:
Research on influence of intertooth space confriction to transmission efficiency
under EHL
Authors:
Liang, Wenhong1 ; Liu, Kai1 ; Liu, Xiaolin1 ; Cui, Yahui1/梁文宏;刘凯;;崔亚辉
Author affiliation:
1
Faculty of Mechanical and Precision Instrument Engineering, Xi'an University of Technology,
XAUT, Xi'an, China
Corresponding author:
Liang, W. (xws-liangwenhong@163.com)
Source title:
Advanced Materials Research
Abbreviated source title:
Adv. Mater. Res.
Volume:
605-607
Monograph title:
Advanced Designs and Researches for Manufacturing
Issue date:
2013
Publication year:
2013
Pages:
1158-1163
Language:
English
ISSN:
10226680
ISBN-13:
9783037855447
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Materials and Products Manufacturing
Technology, ICMPMT 2012
Conference date:
September 22, 2012 - September 23, 2012
Conference location:
Guangzhou, China
Conference code:
94736
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
Engagement between gear teeth with confriction has been analyzed aim at low
speed and heavy transmission mode of spur gear in aerogenerator gearbox. Nonlinear relation
between parameters such as confriction, normal pressure, number of teeth, ratio of transmission,
and thickness of fluid film has been deduced by using the theory of elasto-hydrodynamic
lubrication (EHL) and gear mesh. Numerical calculation of these equations has been made
progress by using MATLAB software under the premise of no analytical solution. The efficiency of
each point on line of action has been received. And then the influence of confriction in intertooth
space to transmission efficiency under EHL has been analyzed. The results can be provided as
argument and numerical value reference for optimization of the gearbox lectotype in
areogenerator to make the efficiency maximized, and for further research on transmission
efficiency of planet gear train. © (2013) Trans Tech Publications, Switzerland.
Number of references:
6
Main heading:
Elastohydrodynamic lubrication
Controlled terms:
Design - Efficiency - Gear teeth - Manufacture - MATLAB
- Research - Spur gears
Uncontrolled terms:
Aero-generator - Confriction in intertooth space - EHL Elastic fluids - Fluid films - Gear meshes - Gear train - Low speed - Matlabsoftware - Nonlinear relations
- Normal pressure - Numerical calculation Numerical values - Transmission efficiency - Transmission mode
Classification code:
921 Mathematics - 913.4 Manufacturing - 913.1 Production
Engineering - 901.3 Engineering Research - 607.2 Lubrication - 601.2 Machine
Components - 408 Structural Design
DOI:
10.4028/www.scientific.net/AMR.605-607.1158
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number:
20130115865582
Title:
The vestibular system modeling in the head and eye movement research
Authors:
Wang, Changyuan1 ; Yao, Bing1 ; Bi, Hongzhe2 ; Jia, Hongbo2/王长元;;;
Author affiliation:
1
School of Computer Science, Xi'an University of Technology, Shaanxi, China
2
Air Force Institute of Aviation Medicine, Beijing, China
Corresponding author:
Wang, C. (cyw901@163.com)
Source title:
Advanced Materials Research
Abbreviated source title:
Adv. Mater. Res.
Volume:
605-607
Monograph title:
Advanced Designs and Researches for Manufacturing
Issue date:
2013
Publication year:
2013
Pages:
2434-2437
Language:
English
ISSN:
10226680
ISBN-13:
9783037855447
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Materials and Products Manufacturing
Technology, ICMPMT 2012
Conference date:
September 22, 2012 - September 23, 2012
Conference location:
Guangzhou, China
Conference code:
94736
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
Head and eye movement is eye movement response to head movements, the eyes
are the signals generated by the vestibular system is movement.The vestibular system is
important to feel the organs and tissues of the body movement,Can be said that the vestibular
system response to head movement, eye movement associated with the vestibule.We can use
eye movements comparing with normal eye movements to detect whether the dizziness,in this
process the modeling of the vestibular system is very important.Paper summarizes the response
of head and eye movement system, vestibular system in the head and eye movement systems
vestibular system exercise and Research at home and abroad, raised modeling method of the
head and eye movement system when turn the head. © (2013) Trans Tech Publications,
Switzerland.
Number of references:
4
Main heading:
Eye movements
Controlled terms:
Design - Manufacture - Models - Research - Tissue
Uncontrolled terms:
Body movements - Head movements - Head rotation Vestibular system
Classification code:
461.1 Biomedical Engineering - 461.2 Biological Materials and Tissue
Engineering - 537.1 Heat Treatment Processes - 901.3 Engineering Research - 902.1
Engineering Graphics
DOI:
10.4028/www.scientific.net/AMR.605-607.2434
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number:
20130115865007
Title:
The hydraulic characteristics of slope flow
Authors:
Zhenzhou, Shen1, 2 ; Wenyi, Yao2 ; Zhanbin, Li1 ; Peiqing, Xiao2 ; Mian, Li2 ; Jishan,
Yang2/申震洲;姚文艺;李占斌;;李勉;
Author affiliation:
1
Institute of Water Resources and Hydro-elcetric Engineering, Xian University of Technology,
Xian, China
2
Yellow River Institute of Hydraulic Research, YRCC, MWR, Zhengzhou, China
Corresponding author:
Zhenzhou, S. (shenzz@139.com)
Source title:
Advanced Materials Research
Abbreviated source title:
Adv. Mater. Res.
Volume:
601
Monograph title:
Management, Manufacturing and Materials Engineering II
Issue date:
2013
Publication year:
2013
Pages:
123-127
Language:
English
ISSN:
10226680
ISBN-13:
9783037855423
Document type:
Conference article (CA)
Conference name:
2012 2nd International Conference on Management, Manufacturing and
Materials Engineering, ICMMM 2012
Conference date:
September 21, 2012 - September 23, 2012
Conference location:
Beijing, China
Conference code:
94735
Sponsor:
Zhengzhou University; Beijing University of Science and Technology; University of
Sydney; Bowling Green State University, USA; IAMSET
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
Slope hydrology is an important branch of Modern hydrology, it has a great
significance to study the runoff and converge mechanism research of the basin. The
characteristics study include of runoff velocity and infiltration rate etc al. the runoff velocity is an
important physical quantity to describe overland flow hydraulics characterize. This paper study
the effect of slope degrees and water drainage amount on the runoff velocity. The result shows:
slope degree and water drainage both are the important factors to change the runoff velocity.
The average runoff velocity were increased first and then reach steady-state fluctuations
between 0.1-1m/s at different drainage amount, the time they got to the steady states was
different. The results could provide some technology support to establishment slope erosion
model. © (2013) Trans Tech Publications, Switzerland.
Number of references:
11
Main heading:
Runoff
Controlled terms:
Hydrology - Manufacture - Velocity
Uncontrolled terms:
Hillslope hydrology - Hydraulic characteristic - Infiltration
rate - Mechanism research - Overland flow - Physical quantities - Runoff velocity
- Slope - Slope erosion - Slope flow
- Slope hydrology - Steady state Steady-state fluctuation - Technology support - Water drainage
Classification code:
444 Water Resources - 444.1 Surface Water - 471 Marine Science
and Oceanography - 537.1 Heat Treatment Processes - 931.1 Mechanics
DOI:
10.4028/www.scientific.net/AMR.601.123
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
20130119 新增 13 条
1.
Accession number:
20130215886136
Title:
Detecting tampered regions in digital images using discrete cosine transform and
singular value decomposition
Authors:
Kang, Xiaobing1 ; Lin, Guangfeng1 ; Chen, Yajun1 ; Zhang, Erhu1 ; Duan,
Ganglong2/康晓兵;;陈亚军; 张二虎;段刚龙
Author affiliation:
1
Department of Information Science, Xi'an University of Technology, Xi'an Shaanxi, 710048,
China
2
Department of Information Management, Xi'an University of Technology, Xi'an Shaanxi,
710048, China
Corresponding author:
Kang, X. (kangxb@xaut.edu.cn)
Source title:
International Journal of Digital Content Technology and its Applications
Abbreviated source title:
Int. J. Digit. Content Technol. Appl.
Volume:
6
Issue:
23
Issue date:
2012
Publication year:
2012
Pages:
179-188
Language:
English
ISSN:
19759339
E-ISSN:
22339310
Document type:
Journal article (JA)
Publisher:
Advanced Institute of Convergence Information Technology, Myoungbo Bldg
3F,, Bumin-dong 1-ga, Seo-gu, Busan, 602-816, Korea, Republic of
Abstract:
Region duplication is a simple and common form of image tampering used to hide
or clone special objects in a single image scene. In this paper, we describe a novel detection
method for region duplication forgery that automatically detects and localizes tampered regions
in digital images using discrete cosine transform(DCT) and singular value decomposition(SVD).
DCT is applied to each block to represent its features resisting typical geometric manipulations.
SVD is used for improving the ability on resisting noise and dimensionality reduction.
Comparisons with the existing methods by experimental works indicate that the proposed
algorithm is more robust against some common postprocessing operations or attacks such as
typical geometrical transformations, lossy JPEG compression, additive Gaussian white noise and
Gaussian blur filtering. These operations and distortions are currently techniques used to conceal
traces of region duplication forgery in digital images.
Number of references:
18
Main heading:
Singular value decomposition
Controlled terms:
Discrete cosine transforms - Image compression - Image
processing
Uncontrolled terms:
Additive Gaussian white noise - Detection methods - Digital
image - Dimensionality reduction - Gaussian blur - Geometric manipulation Geometrical transformation - Image forensics - Image tampering - JPEG compression
- Passive detection - Region duplication forgery - Single images - Special objects Techniques used
Classification code:
741 Light, Optics and Optical Devices - 921 Mathematics - 921.3
Mathematical Transformations
DOI:
10.4156/jdcta.vol6.issue23.21
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number:
20130215877106
Title:
Controlled deposition, electrical and electrochemical properties of electroless
nickel layers on microarc oxidized magnesium substrates
Authors:
Li, Junming1 ; Zhang, Qianwen1 ; Cai, Hui2 ; Wang, Aijuan1 ; Zhang, Jumei2 ; Hua,
Xiaohu2/李均明;;蔡辉;王爱娟;张菊梅;
Author affiliation:
1
School of Materials Science and Engineering, Xi'An University of Technology, Xi'an 710048,
China
2
College of Materials Science and Engineering, Xi'An University of Science and Technology,
Xi'an 710054, China
Corresponding author:
Cai, H. (caihui35806505@163.com)
Source title:
Materials Letters
Abbreviated source title:
Mater Lett
Volume:
93
Issue date:
2013
Publication year:
2013
Pages:
263-265
Language:
English
ISSN:
0167577X
CODEN:
MLETDJ
Document type:
Journal article (JA)
Publisher:
Elsevier, P.O. Box 211, Amsterdam, 1000 AE, Netherlands
Abstract:
We prepared various porous structures on magnesium substrates by microarc
oxidation (MAO) pretreatment in different solutions, and then controllably deposited electroless
nickel (EN) layers on them under identical plating conditions. The results indicate that the
microstructures, electrical and electrochemical properties of EN layers are highly dependent on
the porous surface. Thin layer including tiny nickel granule is deposited on
NaF-solution-pretreated substrates, but thick layer, consisting of typical nickel nodule, is formed
on substrates oxidized in Na2SiO3 solution, while excellent electrical conductivity and corrosion
resistance are obtained. Whereas, the reticular-structured layers with wormlike nickel as well as
high thickness and resistivity are area-selectively deposited on the substrate pretreated in
Na3PO4 solution. © 2012 Elsevier B.V.
Number of references:
11
Main heading:
Substrates
Controlled terms:
Corrosion resistance - Deposits - Electric conductivity Electric properties - Electrochemical properties - Magnesium - Microstructure Nickel - Sodium
Uncontrolled terms:
Controlled deposition - Electrical conductivity - Electroless
nickel - Electroless nickel layer - Magnesium substrates - Microarc - Microarc
oxidation - Plating conditions - Porous structures - Porous surface
Pre-Treatment - Thick layers - Thin layers
Classification code:
951 Materials Science - 933 Solid State Physics - 801.4.1
Electrochemistry - 801 Chemistry - 701.1 Electricity: Basic Concepts and Phenomena 617 Turbines and Steam Turbines - 612 Engines - 549.2 Alkaline Earth Metals - 549.1
Alkali Metals - 548.1 Nickel - 539.1 Metals Corrosion - 532 Metallurgical Furnaces 461 Bioengineering and Biology
DOI:
10.1016/j.matlet.2012.11.112
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number:
20130215877088
Title:
TEM characterization of Si films grown on 6H-SiC (0001) C-face
Authors:
飞;杨陈
Li, Lianbi1, 2 ; Chen, Zhiming1 ; Xie, Longfei1 ; Yang, Chen1/李连碧;陈治明;谢龙
Author affiliation:
1
Department of Electronic Engineering, Xi'An University of Technology, Xi'an, China
2
School of Science, Xi'An Polytechnic University, Xi'an, China
Corresponding author:
Chen, Z. (chenzm@xaut.edu.cn)
Source title:
Materials Letters
Abbreviated source title:
Mater Lett
Volume:
93
Issue date:
2013
Publication year:
2013
Pages:
330-332
Language:
English
ISSN:
0167577X
CODEN:
MLETDJ
Document type:
Journal article (JA)
Publisher:
Elsevier, P.O. Box 211, Amsterdam, 1000 AE, Netherlands
Abstract:
Si films with ⟨111⟩ preferred orientation have been prepared on 6H-SiC (0001)
C-face by low-pressure chemical vapor deposition. The high-resolution transmission electron
microscopy and the selected area electron diffraction results indicate that the Si film has epitaxial
connection with the 6H-SiC substrate and the parallel-plane relationship of Si/6H-SiC
heterojunction is (111)Si//(0001)6H-SiC. Misfit dislocation array is clearly observed at the
Si/6H-SiC interface, which accommodates the most of lattice mismatch strain and make the
lattice coincident at the Si/6H-SiC interface. © 2012 Published by Elsevier B.V.
Number of references:
7
Main heading:
Silicon carbide
Controlled terms:
Chemical vapor deposition - Electron diffraction - Epitaxial
growth - Heterojunctions - Lanthanum compounds - Silicon - Transmission
electron microscopy - Vapors
Uncontrolled terms:
Preferred orientations - Selected area electron diffraction Si films - SiC substrates - TEM characterization
Classification code:
932.2 Nuclear Physics - 813.1 Coating Techniques - 813 Coatings
and Finishes - 804 Chemical Products Generally - 741.3 Optical Devices and Systems 714.2 Semiconductor Devices and Integrated Circuits - 712.1.1 Single Element
Semiconducting Materials
DOI:
10.1016/j.matlet.2012.11.093
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number:
20130215895269
Title:
Passivity-based control of double-fed induction generator under unbalanced grid
voltage fault
Authors:
Liu, Jun1 ; Jiang, Shuo-Dong1/刘军;蒋说东
Author affiliation:
1
Faculty of Automation and Information Engineering, Xi'an University of Technology, Xi'an
Shaanxi 710048, China
Corresponding author:
Liu, J. (liujun0310@sina.com)
Source title:
Kongzhi Lilun Yu Yingyong/Control Theory and Applications
Abbreviated source title:
Kong Zhi Li Lun Yu Ying Yong
Volume:
29
Issue:
10
Issue date:
October 2012
Publication year:
2012
Pages:
1331-1338
Language:
Chinese
ISSN:
10008152
CODEN:
KLYYEB
Document type:
Journal article (JA)
Publisher:
South China University of Technology, Guangzhou, 510640, China
Abstract:
To inhibit the imbalance current in the stator and the rotor caused by the
unbalanced grid voltage, we propose a passivity control strategy for the double-fed induction
generator system (DFIG). On the basis of the passivity of the positive and negative sequence
models in the positive synchronously rotating frame, a passivity state feedback controller is first
designed. Next, a method for calculating expectation values is developed, by which we calculate
the command values for the negative sequence components of the stator current and the rotor
current based on the unbalanced control objectives. The command values of the positive
sequence components of the stator current and the rotor current are calculated on the basis of
positive sequence components of the stator voltage and the expectation values of the
electromagnetic torque. Thus, a passive controller for DFIG under unbalance grid voltage
condition is designed. Simulation results show that the proposed scheme effectively inhibits the
imbalance currents in the stator and the rotor, reduces the output torque fluctuation, and
enhances the non-interrupt operation ability of DFIG under unbalanced grid voltages.
Number of references:
15
Main heading:
Rotors (windings)
Controlled terms:
Asynchronous generators - State feedback - Stators
Uncontrolled terms:
Control objectives - Double fed induction generator Electromagnetic torques - Expectation values - Grid voltage - Negative sequence Output torque - Passive controllers - Passivity based control - Passivity control
Positive-sequence components - Rotating frame - Rotor current - State feedback
controller - Stator currents - Stator voltages
Classification code:
704.1 Electric Components - 705.1 Electric Machinery, General 705.2.1 AC Generators - 731.1 Control Systems
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number:
20130215877001
Title:
Single-channel color image encryption based on iterative fractional Fourier
transform and chaos
Authors:
Sui, Liansheng1 ; Gao, Bo1/隋连升;高波
Author affiliation:
1
School of Computer Science and Engineering, Xi'An University of Technology, Xi'an 710048,
China
Corresponding author:
Sui, L. (liudua2010@gmail.com)
Source title:
Optics and Laser Technology
Abbreviated source title:
Opt Laser Technol
Volume:
48
Issue date:
2013
Publication year:
2013
Pages:
117-127
Language:
English
ISSN:
00303992
CODEN:
OLTCAS
Document type:
Journal article (JA)
Publisher:
Elsevier Ltd, Langford Lane, Kidlington, Oxford, OX5 1GB, United Kingdom
Abstract:
A single-channel color image encryption is proposed based on iterative fractional
Fourier transform and two-coupled logistic map. Firstly, a gray scale image is constituted with
three channels of the color image, and permuted by a sequence of chaotic pairs which is
generated by two-coupled logistic map. Firstly, the permutation image is decomposed into three
components again. Secondly, the first two components are encrypted into a single one based on
iterative fractional Fourier transform. Similarly, the interim image and third component are
encrypted into the final gray scale ciphertext with stationary white noise distribution, which has
camouflage property to some extent. In the process of encryption and description, chaotic
permutation makes the resulting image nonlinear and disorder both in spatial domain and
frequency domain, and the proposed iterative fractional Fourier transform algorithm has faster
convergent speed. Additionally, the encryption scheme enlarges the key space of the
cryptosystem. Simulation results and security analysis verify the feasibility and effectiveness of
this method. © 2012 Elsevier Ltd.
Number of references:
37
Main heading:
Cryptography
Controlled terms:
Fourier transforms - Image processing - Iterative methods White noise
Uncontrolled terms:
Ciphertexts - Color image encryptions - Color images Convergent speed - Encryption schemes - Fractional Fourier transforms - Frequency
domains - Gray scale - Gray-scale images - Iterative fractional
- Logistic maps Noise distribution - Security analysis - Single-channel - Spatial domains - Third
component - Three channel - Three component - Two-component
Classification code:
921.3 Mathematical Transformations - 741 Light, Optics and Optical
Devices - 723 Computer Software, Data Handling and Applications - 921.6 Numerical
Methods - 718 Telephone Systems and Related Technologies; Line Communications - 716
Telecommunication; Radar, Radio and Television - 711 Electromagnetic Waves - 717
Optical Communication
DOI:
10.1016/j.optlastec.2012.10.016
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number:
20130215876943
Title:
Color image encryption based on gyrator transform and Arnold transform
Authors:
Sui, Liansheng1 ; Gao, Bo1/隋连升;高波
Author affiliation:
1
School of Computer Science and Engineering, Xi'An University of Technology, Xi'an 710048,
China
Corresponding author:
Sui, L. (liudua2010@gmail.com)
Source title:
Optics and Laser Technology
Abbreviated source title:
Opt Laser Technol
Volume:
48
Issue date:
2013
Publication year:
2013
Pages:
530-538
Language:
English
ISSN:
00303992
CODEN:
OLTCAS
Document type:
Journal article (JA)
Publisher:
Elsevier Ltd, Langford Lane, Kidlington, Oxford, OX5 1GB, United Kingdom
Abstract:
A color image encryption scheme using gyrator transform and Arnold transform is
proposed, which has two security levels. In the first level, the color image is separated into three
components: red, green and blue, which are normalized and scrambled using the Arnold
transform. The green component is combined with the first random phase mask and transformed
to an interim using the gyrator transform. The first random phase mask is generated with the sum
of the blue component and a logistic map. Similarly, the red component is combined with the
second random phase mask and transformed to three-channel-related data. The second random
phase mask is generated with the sum of the phase of the interim and an asymmetrical tent map.
In the second level, the three-channel-related data are scrambled again and combined with the
third random phase mask generated with the sum of the previous chaotic maps, and then
encrypted into a gray scale ciphertext. The encryption result has stationary white noise
distribution and camouflage property to some extent. In the process of encryption and
decryption, the rotation angle of gyrator transform, the iterative numbers of Arnold transform,
the parameters of the chaotic map and generated accompanied phase function serve as
encryption keys, and hence enhance the security of the system. Simulation results and security
analysis are presented to confirm the security, validity and feasibility of the proposed scheme. ©
2012 Elsevier Ltd. All rights reserved.
Number of references:
36
Main heading:
Cryptography
Controlled terms:
Chaotic systems - Gyrators - Image processing - White noise
Uncontrolled terms:
Arnold transform - Chaotic map - Ciphertexts - Color
image encryptions - Color images - Encryption and decryption - Encryption key -
Gray scale - Green component - Gyrator transform
- Logistic maps - Noise
distribution - Phase functions - Random phase masks - Red , green and blues Rotation angles - Second level - Security analysis - Security level - Tent map
Three component
Classification code:
931 Classical Physics; Quantum Theory; Relativity - 921 Mathematics
- 741 Light, Optics and Optical Devices - 723 Computer Software, Data Handling and
Applications - 961 Systems Science - 718 Telephone Systems and Related Technologies;
Line Communications - 716 Telecommunication; Radar, Radio and Television - 711
Electromagnetic Waves - 708.4 Magnetic Materials - 717 Optical Communication
DOI:
10.1016/j.optlastec.2012.11.020
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number:
20130215878829
Title:
Pore size gradient hydroxyapatite scaffolds with interconnected pores fabricated
by a template method
Authors:
Tang, Yufei1 ; Zhao, Kang1 ; Hu, Long1/汤玉斐;赵康;胡龙
Author affiliation:
1
College of Materials Science and Engineering, Xi'an University of Technology, Xi'an Shaanxi
710048, China
Corresponding author:
Tang, Y. (yftang@xaut.edu.cn)
Source title:
Advanced Materials Research
Abbreviated source title:
Adv. Mater. Res.
Volume:
602-604
Monograph title:
Progress in Materials and Processes
Issue date:
2013
Publication year:
2013
Pages:
1219-1222
Language:
English
ISSN:
10226680
ISBN-13:
9783037855430
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Materials and Products Manufacturing
Technology, ICMPMT 2012
Conference date:
September 22, 2012 - September 23, 2012
Conference location:
Guangzhou, China
Conference code:
94736
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
Pore size gradient hydroxyapatite scaffolds with interconnected pores were
fabricated using a novel template with graded polymer beads and slip casting. The microstructure,
phase, porosity, and compression strength of the fabricated pore size gradient HA scaffolds were
characterized. The scaffolds were also examined for their cell compatibility in vitro using human
osteosarcoma (HOS) cells. By using a polymer template with graded sizes, the scaffolds showed
gradually increasing pore size of approximately 177-578 μm and interconnection size ranges from
71.5-290.7 μm along the cylindrical axis. The porosity of selected sections of the pore size
gradient HA scaffolds ranged from 62.4-71.2%, while the compressive strength decreased from
8.1-3.72 MPa as the pore size and NaCl content increased. HOS cells showed best growth in
sections of the scaffold with pore sizes of 480-578 μm. © (2013) Trans Tech Publications,
Switzerland.
Number of references:
10
Main heading:
Scaffolds (biology)
Controlled terms:
Cells - Cytology - Fabrication - Hydroxyapatite - Pore size
- Sodium chloride
Uncontrolled terms:
Cell compatibility - Compression strength - Cylindrical axis
- Human osteosarcoma - In-vitro - Interconnected pores - Interconnection size Polymer beads - Polymer templates - Size gradient
- Slip casting - Template
methods
Classification code:
461.1 Biomedical Engineering - 461.2 Biological Materials and Tissue
Engineering - 804.2 Inorganic Compounds - 913.4 Manufacturing - 951 Materials
Science
DOI:
10.4028/www.scientific.net/AMR.602-604.1219
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number:
20130215878674
Title:
In-situ production of (Fe,Cr)7C3 particulate bundles reinforced iron matrix
composites
Authors:
Tian, Jinglai1 ; Ye, Fangxia2 ; Zhong, Lisheng3 ; Xu, Yunhua2/;;;;
Author affiliation:
1
School of Metallurgical Engineering, Xian University of Architecture and Technology, Xian,
China
2
School of Materials Science and Engineering, Xian University of Technology, Xian, China
3
Institute of Wear-resistance Materials, Xian University of Architecture and Technology, Xian,
China
Corresponding author:
Tian, J. (tjl79@eyou.com)
Source title:
Advanced Materials Research
Abbreviated source title:
Adv. Mater. Res.
Volume:
602-604
Monograph title:
Progress in Materials and Processes
Issue date:
2013
Publication year:
2013
Pages:
456-459
Language:
English
ISSN:
10226680
ISBN-13:
9783037855430
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Materials and Products Manufacturing
Technology, ICMPMT 2012
Conference date:
September 22, 2012 - September 23, 2012
Conference location:
Guangzhou, China
Conference code:
94736
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
In-situ production of (Fe,Cr)7C3 particulate bundles -reinforced iron matrix
composite was prepared by infiltration casting between Cr wires and white cast iron at 1200°C
plus subsequent heat treatment. The composites under different heat treatment times were
comparatively characterized by scanning electron microscopy (SEM) and pin-on-disc wear
resistance tests. The results show that the area of the particle bundles gradually increases with
the heat treatment time increasing, and the chemical compositions change from eutectic to
hypoeutectic, the morphologies of the reinforcements present chrysanthemum-shaped, granular
and intercrystalline eutectics. Under 5 N loads, the composites appear excellent wear resistance,
which is 36 times for the reference sample. © (2013) Trans Tech Publications, Switzerland.
Number of references:
14
Main heading:
Particle reinforced composites
Controlled terms:
Composite materials - Eutectics - Heat treatment - Particles
(particulate matter) - Reinforcement - Sandwich structures - Scanning electron
microscopy - Wear resistance
Uncontrolled terms:
Chemical compositions - Heat treatment time - In-situ In-situ production - Infiltration casting - Intercrystalline - Iron matrix - Particulate
bundles - Pin on disc - Resistance tests
- Treatment time - White cast irons
Classification code:
415 Metals, Plastics, Wood and Other Structural Materials - 421
Strength of Building Materials; Mechanical Properties - 537.1 Heat Treatment Processes 741.1 Light/Optics - 801.4 Physical Chemistry - 951 Materials Science
DOI:
10.4028/www.scientific.net/AMR.602-604.456
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number:
20130215895369
Title:
Control for two-stage matrix converter excited doubly-fed wind generator
Authors:
Wang, Junrui1, 2 ; Zhong, Yanru1/王君瑞;钟彦儒
Author affiliation:
1
School of Automation and Information Engineering, Xi'an University of Technology, Xi'an
710048, China
2
School of Electrical and Information Engineering, The North University for Ethnics, Yinchuan
750021, China
Corresponding author:
Zhong, Y. (zhongyr@mail.xaut.edu.cn)
Source title:
Taiyangneng Xuebao/Acta Energiae Solaris Sinica
Abbreviated source title:
Taiyangneng Xuebao
Volume:
33
Issue:
11
Issue date:
November 2012
Publication year:
2012
Pages:
1992-1998
Language:
Chinese
ISSN:
02540096
CODEN:
TYNPDG
Document type:
Journal article (JA)
Publisher:
Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China
Abstract:
Two-stage matrix converter has a real DC link, but does not contain large DC-link
energy storage capacitors compared with conventional PWM converters. Combined with the
advantages of two-stage matrix converter, AC-excited generation technique and vector control
scheme, the system of the doubly-fed wind power generation excited by two-stage matrix
converter was established. The two-stage matrix converter realizes rectifier and inverter control
with dual space voltage vector modulation. Based on the control models of idle-load
grid-connection and running in steady state of doubly-fed wind power generator, it makes wind
generator realize almost no impact current grid-connection and decoupling control of active
power and reactive power by application the control strategy of the stator flux linkage orientation.
The experimental results show that the two-stage matrix converter excitation doubly-fed wind
power generation system can realize soft grid, output active and reactive power can be
independent regulation.
Number of references:
12
Main heading:
Electric rectifiers
Controlled terms:
AC generator motors - Electric power generation - Electric power
transmission networks - Reactive power - Vector spaces - Wind power - Wind
turbines
Uncontrolled terms:
Active power - Control model - Control strategies - DC
links - Dc-link - Decoupling controls - Doubly-fed - Dual spaces - Energy storage
capacitor - Generation techniques
- Grid connections - Impact current - Inverter
control - PWM converter - Running-in - Stator flux linkage orientation - Steady
state - Two stage matrix converter - Variable speed constant frequency - Vector
control scheme
- Wind generator systems - Wind power generation systems
Classification code:
921 Mathematics - 714.2 Semiconductor Devices and Integrated
Circuits - 706.1.1 Electric Power Transmission - 706 Electric Transmission and Distribution
- 705.3.1 AC Motors - 615.8 Wind Power (Before 1993, use code 611 ) - 615
Thermoelectric, Magnetohydrodynamic and Other Power Generators
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
10.
Accession number:
20130215883564
Title:
Research on the hot current behavior in long and large highway tunnel fire
Authors:
Wang, Meng1 ; Cheng, Wen1, 2 ; Ma, Xia1 ; Yang, Xin1/王蒙;程文;马霞;杨欣
Author affiliation:
1
Key Laboratory of Northwest Water Resources and Environmental Ecology of Education
Ministry, Xi'an University of Technology, Xi'an 710048, China
2
State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University,
Xi'an 710049, China
Corresponding author:
Wang, M.
Source title:
Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics
Abbreviated source title:
Kung Cheng Je Wu Li Hsueh Pao
Volume:
33
Issue:
12
Issue date:
December 2012
Publication year:
2012
Pages:
2112-2115
Language:
Chinese
ISSN:
0253231X
CODEN:
KCJPDF
Document type:
Journal article (JA)
Publisher:
Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China
Abstract:
Highway tunnel afford convenient traffic to people, which also brought many new
issues to the prevention of fire. This paper presents three-dimensional numerical simulation with
the method of CDF to development of the form of hot current behavior when fired in the Long
and Large highway tunnel, regarding the single-hole and one-way tunnel as a research object in
Qinling. The computational domain of this tunnel is the 200 m in length, the 65.37 m2 in
cross-sectional area the 10.5 m in total width and the 7.2 m in total height. Fire center is located
at 100 m from the tunnel entrance. This research carries out the distribution of the concentration
filed and velocity filed during the different condition of ventilation. It provides a reference for
designing the plan of ventilation and the method of preventing fire scientifically.
Number of references:
11
Main heading:
Research
Controlled terms:
Computer simulation - Ventilation
Uncontrolled terms:
Computational domains - Cross sectional area - Current
behaviors - Fire size - Form of plume - Highway tunnel - Research object Three-dimensional numerical simulations
Classification code:
643.5 Ventilation - 723.5 Computer Applications - 901.3
Engineering Research
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
11.
Accession number:
20130215886158
Title:
Selection of optimal architecture of rapid gradient descent method based on
iterative design
Authors:
Wei, Wei1 ; Shen, Peiyi2 ; Hao, Meiping3 ; Song, Juan3 ; Zhang, Liang3 ; Xu, Hu3 ;
Zhang, Wenzheng3 ; Wang, Wei1/魏嵬;沈沛意;郝美萍;宋娟;张亮;胡旭;张文正;王伟
Author affiliation:
1
School of Computer Science and Engineering, XI'an University of technology, XI'an 710048,
China
2
National school of software, Xidian University, 710071, Xi'an, Shaanxi, China
3
Science and Technology on Communication Security Laboratory, 610041, Chengdu, China
Corresponding author:
Shen, P. (pyshen@xidian.edu.cn)
Source title:
International Journal of Digital Content Technology and its Applications
Abbreviated source title:
Int. J. Digit. Content Technol. Appl.
Volume:
6
Issue:
23
Issue date:
2012
Publication year:
2012
Pages:
381-391
Language:
English
ISSN:
19759339
E-ISSN:
22339310
Document type:
Journal article (JA)
Publisher:
Advanced Institute of Convergence Information Technology, Myoungbo Bldg
3F,, Bumin-dong 1-ga, Seo-gu, Busan, 602-816, Korea, Republic of
Abstract:
Software testing is essential to ensure that the software Quality. On most software
projects testing activities consume at least 30 percent of the project effort. On safety critical
applications, software testing can consume between 50 to 80 percent of project effort. While the
scale of software development and application expands dramatically, to guarantee the quality
and reliability of software is becoming a huge challenge. For the ever-expanding software to
reach the standard of Software Engineering, the best possible testing should be applied. During
the testing, automatic generation of test data is especially important for improving testing
efficiency. This paper presents the results of the author's study on problems and algorithms
related to the automatic generation of software testing data. Results indicated that the method
designed by the author can be used to perform iterative computation on needed data more
efficiently, and then reach an essentially feasible solution. Although the exploratory study
presented here proved rather demanding because few had adopted the approach, it has
achieved positive results in improving the validity and the temporal and spatial complexity of the
existent iterative algorithm.
Number of references:
18
Main heading:
Software testing
Controlled terms:
Algorithms - Computer software selection and evaluation Conjugate gradient method - Iterative methods - Nonlinear programming - Software
engineering - Software reliability
Uncontrolled terms:
Automated test data generation - Automatic Generation Exploratory studies - Feasible solution - Gradient Descent method - Iterative algorithm
- Iterative computation - Iterative design - Optimal architecture - Program path
Safety critical applications - Software project - Software Quality - Spatial complexity
- Test data - Testing efficiency
Classification code:
723 Computer Software, Data Handling and Applications - 921
Mathematics - 921.6 Numerical Methods
DOI:
10.4156/jdcta.vol6.issue23.43
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
12.
Accession number:
20130215886134
Title:
LEACH-based energy-conserved improved protocol for WSNs
Authors:
Wei, Wei1 ; Shen, Peiyi2 ; Zhang, Liang2 ; Xu, Hu2 ; Song, Juan2 ; Zhang,
Wenzheng3 ; Wang, Wei1/魏嵬;沈沛意;张亮;胡旭;宋娟;张文正;王伟
Author affiliation:
1
School of Computer Science and Engineering, XI'an University of Technology, XI'an 710048,
China
2
National school of Software, Xidian University, 710071, Xi'an, Shaanxi, China
3
Science and Technology on Communication Security Laboratory, 610041, Chengdu, China
Corresponding author:
Shen, P. (pyshen@xidian.edu.cn)
Source title:
International Journal of Digital Content Technology and its Applications
Abbreviated source title:
Int. J. Digit. Content Technol. Appl.
Volume:
6
Issue:
23
Issue date:
2012
Publication year:
2012
Pages:
163-171
Language:
English
ISSN:
19759339
E-ISSN:
22339310
Document type:
Journal article (JA)
Publisher:
Advanced Institute of Convergence Information Technology, Myoungbo Bldg
3F,, Bumin-dong 1-ga, Seo-gu, Busan, 602-816, Korea, Republic of
Abstract:
In wireless sensor networks (WSNs) environment, since the battery limitation of
the node energy, energy efficiency is an key factor should be considered as the communication
methods are designing. As classical and hierarchical routing protocols, Leach Protocol plays an
important role. In response to the uneven energy distribution that is caused by the randomness
of cluster heads forming, this paper presents a increased method of Leach protocol which is
intended to trade off the energy consumption of the entire network and extend the life of the
network. The new algorithm is verified by simulation platform, the simulation results show that
the energy consumption and the lifetime of the network are both well improved than that of
original Protocol.
Number of references:
13
Main heading:
Computer simulation
Controlled terms:
Energy efficiency - Energy utilization - Leaching - Wireless
sensor networks
Uncontrolled terms:
Cluster head - Communication method - Energy conserved
- Energy distributions - Hierarchical routing protocol - Key factors - Network lifetime
- Node energy - Simulation platform - Trade off
- Wireless sensor network (WSNs)
Classification code:
525.2 Energy Conservation - 525.3 Energy Utilization - 533.1 Ore
Treatment - 723.5 Computer Applications - 732 Control Devices
DOI:
10.4156/jdcta.vol6.issue23.19
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
13.
Accession number:
20130215879946
Title:
Mining frequent itemsets based on a vertical bit-vector dot-product CBD-tree
Authors:
Yao, Quanzhu1 ; Zhang, Yubing1 ; Zhang, Jiulong1/姚全珠;张玉兵;张九龙
Author affiliation:
1
School of Computer Science and Engineering, Xi'an University of Technology, Xi'an, China
Corresponding author:
Yao, Q. (qzyao@xaut.edu.cn)
Source title:
Journal of Convergence Information Technology
Abbreviated source title:
J. Convergence Inf. Technol.
Volume:
7
Issue:
23
Issue date:
December 2012
Publication year:
2012
Pages:
393-399
Language:
English
ISSN:
19759320
E-ISSN:
22339299
Document type:
Journal article (JA)
Publisher:
Advanced Institute of Convergence Information Technology, Myoungbo Bldg
3F,, Bumin-dong 1-ga, Seo-gu, Busan, 602-816, Korea, Republic of
Abstract:
Efficient algorithms for mining frequent itemsets are crucial for mining association
rules as well as for many other data mining tasks. However, the traditional algorithms produce a
large number of candidate frequent itemsets. In this paper, a new algorithm combining
breadth-first with depth-first search strategy is proposed that does not generate a large number
of candidate frequent itemsets and reduces the unnecessary operation. The proposed algorithm
generates frequent patterns based on a vertical bit-vector dot-product and the method
combining breadth-first with depth-first (CBD-Tree). Using the vertical bit-vector dot-product, the
overhead of calculating data itemsets frequency has been decreased due to the efficient digit
arithmetic instead of the comparisons. For CBD-tree, firstly, the frequent 1-itemsets L1 and the
frequent 2-itemsets L2 are generated by breadth-first and effective pruning strategies are
designed fully making use of the L2. Secondly, the CBD-tree is created by copying the generated
subtree of frequent itemsets by depth-first. Finally, a large number of improper candidate
itemsets are ruled out, and the frequent itemsets are generated in the process of tree building.
The experimental results show that the proposed algorithm is more efficient due to reducing the
storage space of the database and the time of generating the frequent itemsets.
Number of references:
10
Main heading:
Trees (mathematics)
Controlled terms:
Algorithms - Data mining - Digital storage - Forestry Vectors
Uncontrolled terms:
Breadth-first - Data mining tasks - Depth first - Depth
first search - Dot-product - Item sets - Mining associations - Mining frequent
itemsets - Pruning strategy - Storage spaces
- Subtrees - Vertical bit-vector
Classification code:
722.1 Data Storage, Equipment and Techniques - 723 Computer
Software, Data Handling and Applications - 821.0 Woodlands and Forestry - 921
Mathematics
DOI:
10.4156/jcit.vol7.issue23.46
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
20130125 新增 4 条
1.
Accession number:
20130315905623
Title:
Preparation and properties of graphene oxide nanosheets/cyanate ester resin
composites
Authors:
Lin, Qilang1 ; Qu, Lijuan1 ; Lü, Qiufeng1 ; Fang, Changqing2/;;;方长青
Author affiliation:
1
College of Materials Science and Engineering, Fuzhou University, University Town, 2 Xue
Yuan Road, Fuzhou, Fujian Province 350116, China
2
College of Printing and Packing Engineering, Xi'An University of Technology, Xi'an 710048,
China
Corresponding author:
Lin, Q. (linqilang@hotmail.com)
Source title:
Polymer Testing
Abbreviated source title:
Polym Test
Volume:
32
Issue:
2
Issue date:
2013
Publication year:
2013
Pages:
330-337
Language:
English
ISSN:
01429418
CODEN:
POTEDZ
Document type:
Journal article (JA)
Publisher:
Elsevier Ltd, Langford Lane, Kidlington, Oxford, OX5 1GB, United Kingdom
Abstract:
Graphene oxide nanosheets (GONSs)/cyanate ester (CE) resin composites were
prepared via a solution intercalation method. The structures of the GONSs and the composites
were studied using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD),
transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The
mechanical and tribological properties of the composites were investigated. In addition, the
thermal behavior of the composites was characterized by thermogravimetric analysis (TGA).
Results show that the GONSs/CE resin composites were successfully prepared. The addition of
GONSs is beneficial to improve the mechanical and tribological properties of the composites.
Moreover, the composites exhibit better thermal stability in comparison with the CE resin matrix.
© 2012 Elsevier Ltd. All rights reserved.
Number of references:
31
Main heading:
Resins
Controlled terms:
Composite materials - Esters - Fourier transform infrared
spectroscopy - Scanning electron microscopy - Thermogravimetric analysis -
Transmission electron microscopy - Tribology - X ray diffraction
Uncontrolled terms:
Cyanate esters - Ester resins - Graphene oxides Intercalation methods - Mechanical and tribological properties - Preparation Preparation and properties - Resin composites - Resin matrix - Thermal behaviors
Transmission electron microscopy tem
Classification code:
951 Materials Science - 931 Classical Physics; Quantum Theory;
Relativity - 815.1.1 Organic Polymers - 811 Cellulose, Paper and Wood Products 804.1 Organic Compounds - 801 Chemistry - 741.3 Optical Devices and Systems 741.1 Light/Optics - 415 Metals, Plastics, Wood and Other Structural Materials
DOI:
10.1016/j.polymertesting.2012.11.014
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number:
20130315910019
Title:
Fuzzy optimization of crowbar resistances for low-voltage ride through of
doubly-fed induction generators
-
Authors:
Ma, Haomiao1 ; Gao, Yong1 ; Yang, Yuan1 ; Zhang, Wenjuan2/马浩淼;高勇;杨媛;
张文娟
Author affiliation:
1
Automation and Information Engineering College, Xi'an University of Technology, Xi'an
710048, Shaanxi Province, China
2
Baoji University of Arts and Sciences, Baoji 721007, Shaanxi Province, China
Corresponding author:
Ma, H. (mahaomiao@sina.com)
Source title:
Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of
Electrical Engineering
Abbreviated source title:
Zhongguo Dianji Gongcheng Xuebao
Volume:
32
Issue:
34
Issue date:
December 5, 2012
Publication year:
2012
Pages:
17-23
Language:
Chinese
ISSN:
02588013
CODEN:
ZDGXER
Document type:
Journal article (JA)
Publisher:
Chinese Society of Electrical Engineering, Qinghe, Beijing, 100085, China
Abstract:
The crowbar control is one of the main methods for low voltage ride through
(LVRT) of doubly-fed induction generators (DFIGs). The traditional crowbar resistance design is
associated with the constraint boundary valve of the stator and rotor current, and thus the
system security is affected. From this point of view, the fuzzy optimization theory was applied to
derive the estimation expression of the peak rotor current of DFIG and the constraints of the
crowbar resistance in the case of three-phase short-circuit faults in power grids. According to the
fuzzy optimization mechanism and above constraints, the fuzzy sets membership function and
fuzzy objective function about the crowbar resistance were established. The crowbar resistance
of a 1.5 MW DFIG was designed by applying above fuzzy optimization method, and a series of
simulations were conducted in the Matlab/Simulink platform. The simulation results show that
the current of the rotor, oscillation of the bus voltage and the electromagnetic torque oscilation
can be reduced by the crowbar resistance optimization, meanwhile, the operation reliability of
DFIG sets can be effectively improved. © 2012 Chin. Soc. for Elec. Eng.
Number of references:
20
Main heading:
Rotors (windings)
Controlled terms:
Electric fault currents - Fuzzy sets - Membership functions Optimization - Site selection
Uncontrolled terms:
Bus voltage - Constraint boundaries - Doubly fed induction
generators - Doubly fed induction-generator - Electromagnetic torques - Fuzzy
objective function - Fuzzy optimization - Fuzzy optimization theory - Low-voltage Low-voltage ride-through
- MATLAB /simulink - Operation reliability - Power grids Ride-through - Rotor current - Short-circuit fault - System security
Classification code:
402 Buildings and Towers - 403 Urban and Regional Planning and
Development - 704.1 Electric Components - 706.2 Electric Power Lines and Equipment 921 Mathematics - 921.5 Optimization Techniques
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number:
20130315910818
Title:
An application of machine learning on the network security model
Authors:
Wang, Hai-Chen1 ; Zhao, Xiang-Mo1 ; Wang, Hai-Sheng2/;;;
Author affiliation:
1
School of Information Engineering, Chang'an University, Nan Er Huan Zhong Duan, Xi'an
710064, China
2
Department of Computer Science and Technology, Xi'an University of Technology, No. 5,
South Jinhua Road, Xi'an 710048, China
Corresponding author:
Wang, H.-C. (Wanghc0212@yahoo.cn)
Source title:
ICIC Express Letters
Abbreviated source title:
ICIC Express Lett.
Volume:
7
Issue:
2
Issue date:
2013
Publication year:
2013
Pages:
291-296
Language:
English
ISSN:
1881803X
Document type:
Journal article (JA)
Publisher:
ICIC Express Letters Office, Tokai University, Kumamoto Campus, 9-1-1,
Toroku, Kumamoto, 862-8652, Japan
Abstract:
Rough set classifier or SVM (Support Vector Machine) classifier is a typical
machine learning model. Through inductive reasoning Rough set classifier is going to learn the
general rule. The two classifiers are used to classify nodes into trust nodes, strange nodes and
malicious nodes. We use the Rough set classifier to replace the method by settings of the
threshold. The innovation of the paper is to improve the computation accuracy and the efficiency
of the classification computation by using Rough set combined with SVM classifier. In the cases
that with the value of one or two attributes the corresponding classification result can be
determined, we use the Rough set classifier. In other cases, we use SVM classifier. Compared with
the existing security model, the simulation results indicate that the model can obtain higher
examination rate over malicious nodes and the higher transaction success rate. © 2013 ISSN
1881-803X.
Number of references:
9
Main heading:
Rough set theory
Controlled terms:
Computational efficiency - Learning systems - Network security
- Support vector machines
Uncontrolled terms:
Classification results - Computation accuracy - Inductive
reasoning - Malicious nodes - Rough set - Security model - SVM classifiers SVM(support vector machine)
Classification code:
723 Computer Software, Data Handling and Applications - 921
Mathematics - 921.4 Combinatorial Mathematics, Includes Graph Theory, Set Theory
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number:
20130315905159
Title:
Using an external electric field to reduce laser damage of DLC films
Authors:
Wu, Shen-Jiang1, 2 ; Shi, Wei1 ; Su, Jun-Hong2/吴慎将;施卫;苏俊宏
Author affiliation:
1
Department of Applied Physics, Xi'an University of Technology, Xi'an 710048, China
2
Key Laboratory of Film Technology and Optical Measurement, Xi'an Technological University,
Xi'an 710032, China
Corresponding author:
Wu, S.-J. (bxait@xatu.edu.cn)
Source title:
International Journal of Materials and Product Technology
Abbreviated source title:
Int J Mater Prod Technol
Volume:
45
Issue:
1-4
Issue date:
2012
Publication year:
2012
Pages:
74-82
Language:
English
ISSN:
02681900
CODEN:
IJMTE2
Document type:
Journal article (JA)
Publisher:
Inderscience Enterprises Ltd., Editorial Office, P O Box 735, Olney, Bucks.,
MK46 5WB, MK46 5WB, United Kingdom
Abstract:
Unbalanced magnetron sputtering (UBMS) was used to deposit a diamond-like
carbon (DLC) film on Si substrates. The film was subjected to a laser to result damages both
before and after an external electric field was applied. A contrast of the damages shows that the
external electric field improves the film's laser induced damage threshold (LIDT) from 0.70 J/cm2
up to 0.82 J/cm 2; when the optical energy is maintained at 1.88 J/cm2, the damaged area of the
film decreases with increasing external electric field. The results show that the external electric
field influences the anti-laser-damage ability of a DLC film because both the photoelectrons
produced by the excitation from the laser and the free electrons in the DLC film can move quickly
within the film. This movement indirectly decreases the energy density in the laser-irradiated
area and slows down the DLC film's graphitisation process, consequently improving the film's
ability to withstand laser damage. © 2012 Inderscience Enterprises Ltd.
Number of references:
15
Main heading:
Laser damage
Controlled terms:
Diamond deposits - Electric fields - Films - Graphite Graphitization - Laser excitation - Lasers
Uncontrolled terms:
Diamond-like carbon - DLC - Graphitisation - Laser
induced damage thresholds - LIDT
Classification code:
482.2.1 Gems - 701.1 Electricity: Basic Concepts and Phenomena 744 Lasers - 802.2 Chemical Reactions - 804 Chemical Products Generally - 933 Solid
State Physics
DOI:
10.1504/IJMPT.2012.051342
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
20130201 新增 11 条
1.
Accession number:
20130315915180
Title:
The research of ecological water demand of Ulansuhai Nur based on the ecological
protection targets
Authors:
Gong, Linlin1, 2 ; Huang, Qiang1 ; Xue, Xiaojie1 ; Jiang, Xiaohui3/巩琳琳;黄强;薛
小杰;蒋晓辉
Author affiliation:
1
Xi'an University of Technology, Xi'an 710048, China
2
Shaanxi Institute of Water Resources and Electric Power Investigation and Design, Xi'an
710001, China
3
Yellow River Institute of Hydraulic Research, Zhengzhou 450003, China
Corresponding author:
Gong, L. (linlingong@126.com)
Source title:
Shuili Fadian Xuebao/Journal of Hydroelectric Engineering
Abbreviated source title:
Shuili Fadian Xuebao
Volume:
31
Issue:
6
Issue date:
December 2012
Publication year:
2012
Pages:
83-88
Language:
Chinese
ISSN:
10031243
Document type:
Journal article (JA)
Publisher:
Tsinghua University Press, Beijing, 100084, China
Abstract:
This paper considers the existing ecological problem and actual situation of
Ulansuhai Nur, and establishes its ecological protection targets, i. e. storage capacity of 240 - 943
million m3, water stage of 1018.35 - 1020 m, and water quality of class IV. With these targets and
the water balance method, we conclude that a water balance of this lake requires the draining
system to provide it a long-term water supply of 5.48 × 108 m3/a. The lake's water demand by its
ecological environments under class IV quality is a primary representation of its ecological water
demand. Using the environmental diluting method of water demand, we develops an ecological
water demand model for the lake, and its calculations of the lake's ecological demands in 1, 5 and
10 years in the existing conditions are 973, 462 and 438 million m3 respectively. These demands
could be reduced through pollution control, for instance, reduced to 678, 239 and 225 million m3
if the pollutant is cut down by 30%, and further to 607, 176 and 153 million m3 if cut down by
40%. The presented results are essential to the planning of ecological restoration in Ulansuhai
Nur. © copyright.
Number of references:
15
Main heading:
Ecology
Controlled terms:
Lakes - Restoration - Water quality - Water supply
Uncontrolled terms:
Draining systems - Ecological environments - Ecological
problem - Ecological protection - Ecological restoration - Ecological water demand Existing conditions - Storage capacity - Water balance - Water balance method
Water demand
Classification code:
402 Buildings and Towers - 407 Maritime and Port Structures; Rivers
and Other Waterways - 409 Civil Engineering, General - 446.1 Water Supply Systems 453.2 Water Pollution Control - 454.3 Ecology and Ecosystems
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number:
20130315915205
Title:
Analysis of cracking mechanism at the spandrel of large underground opening in
laminar rock strata
Authors:
He, Min1, 2 ; Wang, Mingjiang2 ; Hao, Jungang2 ; Li, Ning1/何敏;王明疆;郝军刚;
李宁
Author affiliation:
1
Institution of Geotechnical Engineering, Xi-an University of Technology, Xi-an 710048, China
2
Northwest Institute of Exploration, Design and Research, CHECC, Xi-an 710048, China
Corresponding author:
He, M. (hem@nwh.cn)
Source title:
Shuili Fadian Xuebao/Journal of Hydroelectric Engineering
Abbreviated source title:
Shuili Fadian Xuebao
Volume:
31
Issue:
6
Issue date:
December 2012
Publication year:
2012
Pages:
237-241+185
Language:
Chinese
ISSN:
10031243
Document type:
Journal article (JA)
Publisher:
Tsinghua University Press, Beijing, 100084, China
Abstract:
The underground cavern group of the Ludila hydropower station is one of the
largest underground projects on Jinsha River. When its excavation was completed, a number of
splits appeared at its downstream spandrel, a similar phenomena that has been found in other
underground powerhouses. This work took the Ludila underground powerhouse as a case study
to find the causes for such phenomenon that is vital to stability of large caverns, and to explore
reasonable reinforcement measures, through analyzing the geological features, initial stress,
monitored displacements and numerical simulations. The results indicate that stress
concentration was induced by tilt geo-stress and anisotropy of the rock mass and rock deflection
at the downstream spandrel under excavation unloading. A concept of deflection index is put
forth for evaluation of the depths and range of the splits. © copyright.
Number of references:
4
Main heading:
Rocks
Controlled terms:
Caves - Convergence of numerical methods - Excavation Numerical analysis - Soil mechanics - Stress concentration - Underground power
plants - Unloading
Uncontrolled terms:
Cracking mechanisms - Excavation unloading - Geo-stress Geological features - Hydropower stations - Initial stress - Rock and soil mechanics Rock mass - Rock stratums - Underground cavern group
- Underground opening Underground powerhouse
Classification code:
921.6 Numerical Methods - 674.1 Small Marine Craft - 614 Steam
Power Plants - 613 Nuclear Power Plants - 502.1 Mine and Quarry Operations - 483.1
Soils and Soil Mechanics - 481.1 Geology - 422 Strength of Building Materials; Test
Equipment and Methods - 421 Strength of Building Materials; Mechanical Properties
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number:
20130315915407
Title:
Temperature-rise performance of steel balls coated with CrCN thick films
Authors:
Jia, Guixi1 ; Chang, Jiadong1 ; Li, Yan2 ; Xie, Yintao3/贾贵西;常家东;李言;谢银涛
Author affiliation:
1
Luoyang Institute of Science and Technology, Luoyang 471023, China
2
School of Mechanical and Instrumental Engineering, Xi'an University of Technology, Xi'an
710048, China
3
China Aviation Optical-Electrical Technology Co. Ltd., Luoyang 471003, China
Corresponding author:
Jia, G. (jiaguixi06@163.com)
Source title:
Zhenkong Kexue yu Jishu Xuebao/Journal of Vacuum Science and Technology
Abbreviated source title:
Zhenkong Kexue yu Jishu Xuebao
Volume:
32
Issue:
12
Issue date:
December 2012
Publication year:
2012
Pages:
1074-1077
Language:
Chinese
ISSN:
16727126
CODEN:
CKKSDV
Document type:
Journal article (JA)
Publisher:
Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China
Abstract:
The CrCN composite coatings were deposited by closed-field unbalanced
magnetron sputtering ion plating, on substrates of 6204 bearing steel balls, 45# steel and Si wafer.
The impacts of the coating conditions on microstructures of the coating were evaluated. The
surface morphologies and properties of the CrCN coatings were characterized with atomic force
microscopy, and conventional mechanical probes. The temperature-rise performance of the steel
balls, with or without the CrCN coatings, was studied. The results show that the CrCN coated
steel ball outperforms the control sample in many ways, such as smoother and more compact
surfaces, lower friction coefficient (about 0.11~0.12), higher wear-resistance, and better
temperature-rise performance.
Number of references:
12
Main heading:
Thick films
Controlled terms:
Atomic force microscopy - Bearings (structural) - Composite
coatings - Ion implantation - Magnetron sputtering - Silicon wafers - Wear
resistance
Uncontrolled terms:
Bearing steels - Closed-field unbalanced magnetron sputtering
- Coated steel - Control samples - CrCN coatings - Friction coefficients - Ion
plating - Mechanical probes - Si wafer - Steel balls
- Temperature rise
Classification code:
932.1 High Energy Physics - 813.2 Coating Materials - 813.1
Coating Techniques - 741.3 Optical Devices and Systems - 714.2 Semiconductor Devices
and Integrated Circuits - 421 Strength of Building Materials; Mechanical Properties - 408.2
Structural Members and Shapes
DOI:
10.3969/j.issn.1672-7126.2012.12.03
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number:
20130315915181
Title:
Design and development of component-based hydrological application integration
platform (CHAIP)
Authors:
Jiang, Rengui1 ; Xie, Jiancang1 ; Li, Jianxun1 ; Li, Weiqian1 ; Chen, Tianqing1/姜仁
贵;解建仓;李建勋;李维乾;陈田庆
Author affiliation:
1
Key Lab. of Northwest Water Resources and Environment Ecology of MOE, Xian University of
Technology, Xi'an 710048, China
Corresponding author:
Jiang, R. (jrengui@163.com)
Source title:
Shuili Fadian Xuebao/Journal of Hydroelectric Engineering
Abbreviated source title:
Shuili Fadian Xuebao
Volume:
31
Issue:
6
Issue date:
December 2012
Publication year:
2012
Pages:
89-95
Language:
Chinese
ISSN:
10031243
Document type:
Journal article (JA)
Publisher:
Tsinghua University Press, Beijing, 100084, China
Abstract:
This paper designs and develops a component-based hydrological application
integration platform (CHAIP) of flood control to implement standardization of hydrological
information processing and application integration on this platform, avoiding disadvantages of
the existing system, hard to integrate multi-source information and single mode of
representation in flood control. The platform adopts key techniques of component-based coding,
object-oriented language, framework, and three-dimensional simulation. Its architecture consists
of a data layer, a server layer, an application layer and a client layer; different functional models
at the application layer are designed separately with a modularization idea. Application in a case
study of flood control in Shaanxi province shows that the platform is good in extendibility,
three-dimensional performance and real-time application, and very easy to operate. Thus, CHAIP
provides a support to processing, analysis and decision making in flood control with a good
prospect in applications. © copyright.
Number of references:
12
Main heading:
Flood control
Controlled terms:
Data processing - Floods - Integration - Modular construction
Uncontrolled terms:
Application integration - Application layers - Component
based - Data layer - Design and Development - Existing systems - Functional model
- Information integration - ITS architecture - Key techniques
- Modularizations Multisources - Object-oriented languages - Real-time application - Single mode Three dimensional simulations
Classification code:
405.2 Construction Methods - 454.1 Environmental Engineering,
General - 723.2 Data Processing and Image Processing - 914.1 Accidents and Accident
Prevention - 921.2 Calculus
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number:
20130415918174
Title:
Effect of growth gas flow rate on the SiC crystal resistivity
Authors:
Lin, Shenghuang1 ; Chen, Zhiming1/林生晃;陈治明
Author affiliation:
1
Department of Electronic Engineering, Xi'An University of Technology, Xi'an 710048, China
Corresponding author:
Lin, S. (shenghuanglin@163.com)
Source title:
Journal of Materials Research
Abbreviated source title:
J Mater Res
Volume:
28
Issue:
1
Issue date:
January 14, 2013
Publication year:
2012
Pages:
23-27
Language:
English
ISSN:
08842914
E-ISSN:
20445326
CODEN:
JMREEE
Document type:
Journal article (JA)
Publisher:
Cambridge University Press, 40 West 20th Street, New York, NY 10011-4211,
United States
Abstract:
A technique of controlling growth gas flow rate for adjusting crystal resistivity is
presented in this paper. The experimental results showed that high growth gas flow rate could
affect SiC crystal resistivity remarkably. The SiC crystal resistivity would get higher and higher with
increasing growth gas flow rate. The purifying effect of gas flow rate was contributing to
resistivity increase at a relatively low flow rate range. As for the high gas flow rate, increase of
resistivity might be explained by the well-known site competition effect. Then, one explanation
for reducing nitrogen content in the crystal via increasing gas flow rate was put forward. Namely,
the Si component in the gas species may more easily go through the graphite crucible at the
initial stage to make the growth ambient C-rich when the gas flow rate is ∼800 sccm or more and
hence suppress nitrogen incorporation into carbon site to increase crystal resistivity. This result is
very helpful to grow high purity high resistivity SiC ingots. © 2012 Materials Research Society.
Number of references:
17
Main heading:
Flow rate
Controlled terms:
Electric conductivity - Flow of gases - Metal castings Nitrogen - Silicon carbide
Uncontrolled terms:
Competition effects - Gas species - Graphite crucibles Growth ambient - High growth - High purity - High-resistivity SiC - Initial stages Nitrogen content - Nitrogen incorporation
- Physical vapor transport - Purifying
effect - SiC
Classification code:
534.2 Foundry Practice - 631 Fluid Flow - 631.1.2 Gas Dynamics
- 701.1 Electricity: Basic Concepts and Phenomena - 804 Chemical Products Generally 804.2 Inorganic Compounds
DOI:
10.1557/jmr.2012.203
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number:
20130415919816
Title:
Blind detection of image splicing based on run length matrix combined properties
Authors:
Liu, Han1 ; Yang, Yun1 ; Shang, Minqing1/刘涵;杨云;
Author affiliation:
1
School of Automation and Information Engineering, Xi'An University of Technology, Xi'an,
710048, China
Corresponding author:
Liu, H. (liuhan@xaut.edu.cn)
Source title:
Proceedings of the World Congress on Intelligent Control and Automation
(WCICA)
Abbreviated source title:
Proc. World Congr. Intelligent Control Autom. WCICA
Monograph title:
WCICA 2012 - Proceedings of the 10th World Congress on Intelligent
Control and Automation
Issue date:
2012
Publication year:
2012
Pages:
4545-4550
Article number:
6359340
Language:
English
ISBN-13:
9781467313988
Document type:
Conference article (CA)
Conference name:
10th World Congress on Intelligent Control and Automation, WCICA
2012
Conference date:
July 6, 2012 - July 8, 2012
Conference location:
Beijing, China
Conference code:
94938
Sponsor:
Academy of Mathematics and Systems Science; IEEE Robotics and Automation
Society; IEEE Control Systems Society; National Natural Science Foundation of China; Chinese
Association of Automation
Publisher:
Institute of Electrical and Electronics Engineers Inc., 445 Hoes Lane / P.O. Box
1331, Piscataway, NJ 08855-1331, United States
Abstract:
Image splicing is a technique commonly used in image tampering. In order to
achieve image splicing blind detection, a blind, passive, yet effective splicing detection method is
proposed in this paper. In this method run length matrix is used to extract image feature and
generate the identification model with combination of Neighborhood DCT Coefficient
Co-occurrence Matrix Feature and Markov Feature. Support vector machines (SVM) also is
selected as classifier for training and testing while genetic algorithm is used to optimize
parameters based on evaluation criteria AUC. Experimental results show that there is high
classification accuracy for obtained model by this method. © 2012 IEEE.
Number of references:
16
Main heading:
Support vector machines
Controlled terms:
Intelligent control
Uncontrolled terms:
AUC - Blind detection - Classification accuracy Co-occurrence-matrix - DCT coefficients - Detection methods - Evaluation criteria Identification model - Image features - Image splicing
- Image tampering Markov - Run length - Training and testing
Classification code:
723 Computer Software, Data Handling and Applications - 723.4.1
Expert Systems
DOI:
10.1109/WCICA.2012.6359340
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number:
20130415919601
Title:
Adaptive decoupling control systems based on SVM for large supercritical CFB
boilers combustion system
Authors:
Liu, La-Xun1 ; Liu, Han1 ; Hui-Long Wang1/;刘涵;
Author affiliation:
1
School of Automation and Information Engineering, Xi'An University of Technology, Xi'an,
Shaanxi, China
Corresponding author:
Liu, L.-X. (liuhan@xaut.edu.cn)
Source title:
Proceedings of the World Congress on Intelligent Control and Automation
(WCICA)
Abbreviated source title:
Proc. World Congr. Intelligent Control Autom. WCICA
Monograph title:
WCICA 2012 - Proceedings of the 10th World Congress on Intelligent
Control and Automation
Issue date:
2012
Publication year:
2012
Pages:
3401-3406
Article number:
6359035
Language:
Chinese
ISBN-13:
9781467313988
Document type:
Conference article (CA)
Conference name:
10th World Congress on Intelligent Control and Automation, WCICA
2012
Conference date:
July 6, 2012 - July 8, 2012
Conference location:
Beijing, China
Conference code:
94938
Sponsor:
Academy of Mathematics and Systems Science; IEEE Robotics and Automation
Society; IEEE Control Systems Society; National Natural Science Foundation of China; Chinese
Association of Automation
Publisher:
Institute of Electrical and Electronics Engineers Inc., 445 Hoes Lane / P.O. Box
1331, Piscataway, NJ 08855-1331, United States
Abstract:
An α th-order inversed decoupling control method based on least square support
vector machines (LS-SVM) is presented to resolve the difficulties of inverse modeling with the
traditional inverse control methods in this paper. The nonlinear offline inverse model of plant is
built by LS-SVM, which is cascaded before the original system to decouple a complex
multivariable input and output system into several independent single input single output
pseudo-linear sub-systems. In order to make it have better robustness, with single neuron
adaptive PID as subsystem additional linear controller to constitute a closed-loop system. The
characteristics of combustion system of circulating fluidized bed boilers also are analyzed and
control system based on presented methods is presented. The simulation results demonstrated
that the presented method could achieve accurate decoupling control with robustness. © 2012
IEEE.
Number of references:
7
Main heading:
Robustness (control systems)
Controlled terms:
Fluidized beds - Fuel systems - Intelligent control - Inverse
problems - Linear control systems - Multivariable systems - Pulverized fuel fired
boilers - Support vector machines
Uncontrolled terms:
Adaptive decoupling - Adaptive PID - CFB boilers Circulating fluidized bed boiler - Combustion systems - Decoupling control methods Decoupling controls - Input and outputs - Inverse control - Inverse modeling
Inverse models - Least square support vector machines - Linear controllers - Multi
variables - Offline - Original systems - Single input single output - Single neuron
adaptive - Sub-systems - Supercritical
Classification code:
802.1 Chemical Plants and Equipment - 731.1 Control Systems 723 Computer Software, Data Handling and Applications - 921 Mathematics - 614 Steam
Power Plants - 523 Liquid Fuels - 522 Gas Fuels - 524 Solid Fuels
DOI:
10.1109/WCICA.2012.6359035
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number:
20130415923477
Title:
An enriched radial point interpolation meshless method based on partition of
unity
Authors:
Ma, Wen-Tao1, 2 ; Li, Ning1 ; Shi, Jun-Ping1/马文涛;李宁;师俊平
Author affiliation:
1
Institute of Geotechnical Engineering, Xi'an University of Technology, Xi'an 710048, China
2
Department of Mathematics and Computer Engineering, Ningxia University, Yinchuan
750021, China
Corresponding author:
Ma, W.-T. (wt-ma2002@163.com)
Source title:
Yantu Lixue/Rock and Soil Mechanics
Abbreviated source title:
Rock Soil Mech
Volume:
33
Issue:
12
Issue date:
December 2012
Publication year:
2012
Pages:
3795-3800
Language:
Chinese
ISSN:
10007598
Document type:
Journal article (JA)
Publisher:
Academia Sinica, Wuhan, 430071, China
Abstract:
An enriched radial point interpolation meshless method(X-RPIM) was presented
for the linear elastic fracture problem. In order to represent the discontinuous displacement field
along crack face and stress singularity around the crack tip, enriched functions were added in the
approximation of traditional radial point interpolation meshless method (RPIM) based on the
ideas of partition of unity. The merit of presented method is that the shape functions have the
properties of Kronecker δ functions, which would make the essential boundary be implemented
easily. The construction of discontinuous approximation function, the discrete format of
governing equation and the evaluated process of the mixed-mode stress intensity factors by
using the J integral method are introduced in detail in X-RPIM. The impact for the computational
results of stress intensity factors using different integral domains of crack tip is discussed.
Analyses of numerical examples demonstrate that the enriched radial point interpolation
meshless method can effectively solve fracture problem, and has practical merits for modeling
crack growth problem.
Number of references:
15
Main heading:
Problem solving
Controlled terms:
Crack propagation - Crack tips - Fracture - Interpolation Stress intensity factors
Uncontrolled terms:
Approximation function - Computational results - Crack
faces - Discontinuous displacement field - Governing equations - Growth problems Integral domains - J-integral method - Linear elastic fracture - Mesh-less methods
Mixed-mode stress - Numerical example - Partition of unity - Radial point
interpolations - Shape functions - Stress singularities
Classification code:
421 Strength of Building Materials; Mechanical Properties - 921
Mathematics - 921.6 Numerical Methods
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number:
20130315915213
Title:
Process neural network based on EMD for fault fusion diagnosis of draft tube
Authors:
Wang, Han1, 2 ; Zhang, Xinwei2 ; Luo, Xingqi2 ; Xu, Minghai3/王瀚;张欣伟;罗兴锜;
许明海
Author affiliation:
1
Hydro-China Xibei Engineering Corporation, Xi'an 710065, China
2
Department of Power Engineering, Xi'an University of Technology, Xi'an 710048, China
3
Gansu Jiuquan Power Supply Company, Jiuquan, Gansu 735000, China
Corresponding author:
Luo, X. (hwang_spirit@126.com)
Source title:
Shuili Fadian Xuebao/Journal of Hydroelectric Engineering
Abbreviated source title:
Shuili Fadian Xuebao
Volume:
31
Issue:
6
Issue date:
December 2012
Publication year:
2012
Pages:
282-287
Language:
Chinese
ISSN:
10031243
Document type:
Journal article (JA)
Publisher:
Tsinghua University Press, Beijing, 100084, China
Abstract:
To diagnose accurately vortex rope in the draft tube of hydraulic turbine, this
paper presents a new method of fault diagnosis based on empirical mode decomposition (EMD),
index energy and process neural network (PNN). This method adopts an EMD method to
decompose the monitored pressure pulsation signals of draft tube and constructs index energy
vectors of the signals. Then it takes those vectors as fault samples to train a three-layer discrete
feedforward process neural network, establishes a mapping of dynamic feature vectors into fault
type, and finally realizes intelligent fault diagnosis. Application to a practical example shows that
the method converges faster and its forecast accuracy is higher than that of traditional RBF or BP
neural network. The method produces a small average classification error and hence it is suitable
for vortex fusion fault diagnosis of draft tube. © copyright.
Number of references:
11
Main heading:
Hydraulic turbines
Controlled terms:
Neural networks - Signal processing - Tubes (components) Vortex flow
Uncontrolled terms:
Draft tubes - Fusion diagnosis - Hydroturbines - Index
energy - Process neural network - Vertex strip
Classification code:
616.1 Heat Exchange Equipment and Components - 617.1 Hydraulic
Turbines - 631.1 Fluid Flow, General - 716.1 Information Theory and Signal Processing 723.4 Artificial Intelligence
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
10.
Accession number:
20130415923574
Title:
Calibration-free and model-independent method for high-DOF image-based visual
servoing
Authors:
Zhang, Jie1 ; Liu, Ding1/;刘丁
Author affiliation:
1
School of Automation and Information Engineering, Xi'an University of Technology, Xi'an
Shaanxi, 710048, China
Corresponding author:
Zhang, J. (zhangjlive@163.com)
Source title:
Journal of Control Theory and Applications
Abbreviated source title:
J. Control Theory Appl.
Volume:
11
Issue:
1
Issue date:
2013
Publication year:
2013
Pages:
132-140
Language:
English
ISSN:
16726340
E-ISSN:
10008152
Document type:
Journal article (JA)
Publisher:
South China University of Technology, Guangzhou, 510640, China
Abstract:
This paper presents a novel method to improve the performance of high-DOF
image base visual servoing (IBVS) with an uncalibrated camera. Firstly, analysis and comparison
between point-based and moment-based features are carried out with respect to a 4-DOF
positioning task. Then, an extended interaction matrix (IM) related to the digital image, and a
Kalman filter (KF)-based estimation algorithm of the extended IM without calibration and IM
model are proposed. Finally, the KF-based algorithm is extended to realize an approximation to
decoupled control scheme. Experimental results conducted on an industrial robot show that our
proposed methods can provide accurate estimation of IM, and achieve similar performance
compared with traditional calibration-based method. Therefore, the proposed methods can be
applied to any robot control system in variational environments, and can realize instant operation
to planar object with complex and unknown shape at large displacement. © 2013 South China
University of Technology, Academy of Mathematics and Systems Science, Chinese Academy of
Sciences and Springer-Verlag Berlin Heidelberg.
Number of references:
14
Main heading:
Visual servoing
Controlled terms:
Approximation algorithms - Calibration - Kalman filters Robot applications
Uncontrolled terms:
Accurate estimation - Decoupled control - Digital image Estimation algorithm - Extended interaction - Image moments - Image-based Interaction matrices - Large displacements - Point-based
- Positioning tasks Robot control systems - Un-calibrated camera
Classification code:
944 Moisture, Pressure and Temperature, and Radiation Measuring
Instruments - 943 Mechanical and Miscellaneous Measuring Instruments - 942 Electric
and Electronic Measuring Instruments - 941 Acoustical and Optical Measuring Instruments 921 Mathematics - 732 Control Devices - 731 Automatic Control Principles and
Applications
DOI:
10.1007/s11768-013-0271-7
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
11.
Accession number:
20130415923799
Title:
Hybrid Monte Carlo sampling implementation of Bayesian support vector machine
Authors:
Zhou, Yatong1 ; Li, Jin1 ; Liu, Long2/;;刘泷
Author affiliation:
1
School of Information Engineering, Hebei University of Technology, China
2
School of automation, Xi'an University of Technology, China
Corresponding author:
Zhou, Y. (zyt@hebut.edu.cn)
Source title:
Advances in Information Sciences and Service Sciences
Abbreviated source title:
Adv. Inf. Sci. Serv. Sci.
Volume:
5
Issue:
1
Issue date:
2013
Publication year:
2013
Pages:
284-290
Language:
English
ISSN:
19763700
E-ISSN:
22339345
Document type:
Journal article (JA)
Publisher:
Advanced Institute of Convergence Information Technology, Myoungbo Bldg
3F,, Bumin-dong 1-ga, Seo-gu, Busan, 602-816, Korea, Republic of
Abstract:
The Bayesian support vector machine (BSVM) is a probabilistic machine learning
method with high level of performance. Currently BSVM has been numerically implemented with
three methods including Laplace approximation, mean field and variational method. This paper
proposes a new numerical method to implement BSVM with Hybrid Monte Carlo (HMC) sampling.
In the sampling process, an auxiliary variable was introduced to reduce the sampling difficulty,
and the frog leap was added to avoid the random walk. Experimental results on simulated data
regression indicate the proposed method is feasible. Simultaneously, the effect of parameters
such as step number, step size, and sampling number on performance of BSVM is analyzed.
Number of references:
14
Main heading:
Support vector machines
Controlled terms:
Monte Carlo methods
Uncontrolled terms:
Auxiliary variables - Data regression - Effect of parameters
- Frog leap - Hybrid Monte Carlo - Laplace approximation - Mean field Probabilistic machines - Random Walk - Sampling process
- Step number - Step
size - Variational methods
Classification code:
723 Computer Software, Data Handling and Applications - 922.2
Mathematical Statistics
DOI:
10.4156/AISS.vol5.issue1.35
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
20130208 新增 42 条
1.
Accession number:
20130515975207
Title:
Numerical test study on ground frost heave deformation caused by artificial
horizontal ground freezing method
Authors:
Bi, Guiquan1, 2 ; Wang, Dong1 ; Li, Ning3/毕贵权;;李宁
Author affiliation:
1
School of Energy and Power Engineering, Lanzhou University of Technology, Lanzhou 730050,
China
2
State Key Laboratory of Frozen Soil Engineering, CAREERI, CAS, Lanzhou 730000, China
3
Institute of Geotechnical Engineering, Xi'an university of technology, Xi'an 710048, China
Corresponding author:
Bi, G. (biguiquan@gmail.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
256-259
Issue:
PART 1
Monograph title:
Advances in Civil Engineering II
Issue date:
2013
Publication year:
2013
Pages:
340-343
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855652
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Civil Engineering and Transportation,
ICCET 2012
Conference date:
October 27, 2012 - October 28, 2012
Conference location:
Guilin, China
Conference code:
95112
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
Aiming at frost heave problem existing in tunnel construction with artificial
horizontal ground freezing in coastal areas, this paper puts forward an equivalent load method
for frost heave simulation and a nonlinear deformation simulation method for soil around frost
wall. Employing the numerical test method, the designing parameters' influence on ground frost
heave is studied systematically. These parameters include depth of tunnel, frozen wall thickness,
excavation radius of tunnel and frost heaving ratio. Furthermore, some measures are proposed to
reduce ground frost heave. © (2013) Trans Tech Publications, Switzerland.
Number of references:
5
Main heading:
Numerical methods
Controlled terms:
Civil engineering - Deformation - Excavation - Freezing
Uncontrolled terms:
Coastal area - Equivalent load - Frost heave - Frost heave
deformation - Frost heaving - Frozen wall thickness - Ground freezing - Nonlinear
deformations - Numerical tests - Tunnel construction
Classification code:
409 Civil Engineering, General - 421 Strength of Building Materials;
Mechanical Properties - 422 Strength of Building Materials; Test Equipment and Methods 502.1 Mine and Quarry Operations - 822.2 Food Processing Operations - 921.6 Numerical
Methods
DOI:
10.4028/www.scientific.net/AMM.256-259.340
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number:
20130515963370
Title:
Visual attention based SAR image small target detection
Authors:
Bo, Hua1 ; Gu, Haiyun1 ; Sun, Qiang2/;;孙强
Author affiliation:
1
School of Information and Electronic Engineering, Shanghai Maritime University, Shanghai
201304, China
2
Department of Electronic Engineering, Xi'an University of Technology, Xi'an 710048, China
Corresponding author:
Bo, H. (huabo@shmtu.edu.cn)
Source title:
Journal of Computational Information Systems
Abbreviated source title:
J. Comput. Inf. Syst.
Volume:
9
Issue:
1
Issue date:
January 1, 2013
Publication year:
2013
Pages:
179-186
Language:
English
ISSN:
15539105
Document type:
Journal article (JA)
Publisher:
Binary Information Press, P.O. Box 162, Bethel, CT 06801-0162, United States
Abstract:
More and more attention to the protection of the marine environment, Synthetic
Aperture Radar (SAR) images based the oil spill and ship detection became an important topic of
study. Ships and oil spills often present small targets in SAR images, at the same time due to the
inherent in SAR image speckle noise, often makes the oil spill and ship are difficult to be
accurately detected. This paper proposed a new small target detection method for ships and oil
spills in SAR images, which is a combination of multi-scale Gaussian and Gabor filter banks by
using focus detection method based on visual attention. Simulation results show that the method
has high detection accuracy and verify the effectiveness of the method. © 2013 Binary
Information Press.
Number of references:
13
Main heading:
Synthetic aperture radar
Controlled terms:
Filter banks - Oil spills - Ships
Uncontrolled terms:
Detection accuracy - Focus detection - Gaussians Marine environment - Multiscales - SAR Images - Ship detection - Small target
detection - Small targets - Speckle noise
- Synthetic aperture radar (SAR) images Visual Attention
Classification code:
914.1 Accidents and Accident Prevention - 716.2 Radar Systems and
Equipment - 716 Telecommunication; Radar, Radio and Television - 713 Electronic Circuits
- 674 Small Craft and Other Marine Craft - 672 Naval Vessels - 671 Naval Architecture
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number:
20130515975195
Title:
Research on the shear strength properties of expansive soils
Authors:
Chen, Yi1, 2 ; Zhao, Jing1 ; Hu, Xiao-Hong1/;赵璟;
Author affiliation:
1
School of Civil Engineering and Architecture, Xi'an University of technology, Xi'an, 710048,
China
2
College of Architecture and Transportation Engineering, Guilin university of electronic
technology, Guilin, 541004, China
Corresponding author:
Chen, Y. (chenyi1015@guet.edu.cn)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
256-259
Issue:
PART 1
Monograph title:
Advances in Civil Engineering II
Issue date:
2013
Publication year:
2013
Pages:
287-292
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855652
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Civil Engineering and Transportation,
ICCET 2012
Conference date:
October 27, 2012 - October 28, 2012
Conference location:
Guilin, China
Conference code:
95112
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
The shear strength of expansive soils is now a key geotechnical problem. The
water content and dry density of expansive soils have deep effect on its shear strength. For
analyzing the detail relationship of the water content, dry density and shear strength of this
special soil, direct shear test was carried out with the samples from Xinxiang in middle line of
South to North water diversion project. The results indicate that both of the cohesion and friction
angle grow with dry density and decrease with initial water content. Applying the linear
regression calculation, we obtained mathematical expressions which reveal the variation of shear
strength with the dry density and initial water content of Xinxiang expansive soils. © (2013) Trans
Tech Publications, Switzerland.
Number of references:
6
Main heading:
Shear strength
Controlled terms:
Civil engineering - Soil structure interactions
Uncontrolled terms:
Direct shear test - Dry density - Expansive soils - Friction
angles - Geotechnical problems - Mathematical expressions - South-to-North water
diversion project - Strength property
Classification code:
409 Civil Engineering, General - 421 Strength of Building Materials;
Mechanical Properties - 422 Strength of Building Materials; Test Equipment and Methods 483.2 Foundations
DOI:
10.4028/www.scientific.net/AMM.256-259.287
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number:
20130515971614
Title:
An application of matter-element analysis theory to vulnerability of urban river
Authors:
Fang, Zheng1 ; Wang, Ni1/方正;汪妮
Author affiliation:
1
Institute of Water Resources and Hydro-electric Engineering, Xi'An University of Technology,
Xi'an, China
Corresponding author:
Fang, Z. (jerryfang47@163.com)
Source title:
Proceedings - 2012 9th International Conference on Fuzzy Systems and
Knowledge Discovery, FSKD 2012
Abbreviated source title:
Proc. - Int. Conf. Fuzzy Syst. Knowl. Discov., FSKD
Monograph title:
Proceedings - 2012 9th International Conference on Fuzzy Systems and
Knowledge Discovery, FSKD 2012
Issue date:
2012
Publication year:
2012
Pages:
2569-2572
Article number:
6234101
Language:
English
ISBN-13:
9781467300223
Document type:
Conference article (CA)
Conference name:
2012 9th International Conference on Fuzzy Systems and Knowledge
Discovery, FSKD 2012
Conference date:
May 29, 2012 - May 31, 2012
Conference location:
Chongqing, China
Conference code:
95177
Publisher:
IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC
20036-4928, United States
Abstract:
According to the characteristics of urban rivers, considering the hydrology
conditions and socioeconomic conditions, setting out from the important factors that affects the
vulnerability, this paper presents a Vulnerability Assessment System established for urban rivers,
researches the vulnerability of different reach, so as to provide reference for use and protection
of urban rivers. Several appropriate evaluation indexes are chosen to analyze the vulnerability
level of the Chanba River by Matter-element Analysis Theory, and use rough set theory to
determine the weight. The results indicate that the MA Du-wang and Chang Jia-bay, where is
located in the eastern suburb of Xi'an and is affected greatly by human factors, have the highest
vulnerability, other places have medium vulnerability. © 2012 IEEE.
Number of references:
8
Main heading:
Rivers
Controlled terms:
Fuzzy systems - Rough set theory
Uncontrolled terms:
Evaluation index - Matter-element analysis Socio-economic conditions - Urban river - vulnerability - Vulnerability assessments
Classification code:
407.2 Waterways - 921.4 Combinatorial Mathematics, Includes
Graph Theory, Set Theory
DOI:
10.1109/FSKD.2012.6234101
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
5.
Accession number:
20130415941698
Title:
Configuration of product satisfaction index weights based on SEM
Authors:
Ge, Chang1 ; Yu, Suihuai2 ; Ji, Xiaomin1 ; Xiong, Daqing1/;;吉晓民;熊大庆
Author affiliation:
1
Industrial Design Department, School of Art and Design, Xi'an University of Technology, Xi'an,
China
2
Industrial Design Institute, Northwestern Polytechnical University, Xi'an, China
Corresponding author:
Ge, C. (shenyi17@gmail.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
271
Issue:
PART 1
Monograph title:
Frontiers of Manufacturing and Design Science III
Issue date:
2013
Publication year:
2013
Pages:
417-421
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855782
Document type:
Conference article (CA)
Conference name:
3rd International Conference on Frontiers of Manufacturing and Design
Science, ICFMD 2012
Conference date:
December 11, 2012 - December 13, 2012
Conference location:
Hong kong
Conference code:
95055
Sponsor:
Control Eng. Inf. Sci. Res. Assoc.; International Frontiers of science; and technology
Research Association; National Chin-Yi University of Technology; Integrated Research Center for
Green Living Techniques; Trans Tech Publication
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
In the process of product satisfaction solution by SEM (Structural Equation
Modeling), the model of product satisfaction has been revised aiming at solving the weights of
satisfaction index distribution in the multi-sample situation. According to the characteristic of
satisfaction data sampling, the partial least square is introduced, and the algorithmic method of
satisfaction weights based on SEM is presented. The proposed method has been validated by an
example of digital photo frame. © (2013) Trans Tech Publications, Switzerland.
Number of references:
9
Main heading:
Design
Controlled terms:
Manufacture
Uncontrolled terms:
Algorithmic methods - Data sampling - Digital photos Index distribution - Index weight - Partial least square (PLS) - Product satisfaction Structural equation modeling - Structure equations - Weights
Classification code:
408 Structural Design - 537.1 Heat Treatment Processes
DOI:
10.4028/www.scientific.net/AMM.271-272.417
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number:
20130415932638
Title:
Algorithms of data mining and knowledge discovery of correlativity in
two-dimensional time series
Authors:
Hu, Shaolin1 ; Li, Ye2 ; Zhang, Wei1/;李晔;
Author affiliation:
1
State Key Laboratory of Astronautic Dynamics, Xi'an City, 710043, China
2
School of Automation, Xi'an University of Technology, Xi'an, 710048, China
Corresponding author:
Hu, S. (hfkth@126.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
263-266
Issue:
PART 1
Monograph title:
Information Technology Applications in Industry
Issue date:
2013
Publication year:
2013
Pages:
1844-1848
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855744
Document type:
Conference article (CA)
Conference name:
2012 International Conference on Information Technology and
Management Innovation, ICITMI 2012
Conference date:
November 10, 2012 - November 11, 2012
Conference location:
Guangzhou, China
Conference code:
95052
Sponsor:
Information Science School of Guangdong; University of Business Studies
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
Oriented at dynamic data from complicated process with noise disturbance, it is
very difficult to discover knowledge of correlativity and orderliness. Following some analyzing
results about the shortcoming of relative coefficients in mining non-stationary time series, a
series of new algorithms are built in this paper to mine correlativity in two-dimensional time
series. These new algorithms are based on a expansible framework of model set. Based on these
new mining algorithms, a making decision table is listed not only to mine correlativity in
two-dimensional time series, but also to discover deepening knowledge to transform the
qualitative knowledge "nonlinear relativity" as well as "non-relativity" into deeper quantitative
knowledge about analytical model. These new approaches given in this paper is exoteric in
framework and can be enriched with additional new models. In this way, some professional data
mining and knowledge discovery cab be fulfilled to aim at some specific professional fields. ©
(2013) Trans Tech Publications, Switzerland.
Number of references:
8
Main heading:
Data mining
Controlled terms:
Algorithms - Decision tables - Information technology Mathematical transformations - Relativity - Time series - Two dimensional
Uncontrolled terms:
Correlativity - Data mining and knowledge discovery Dynamic data - Making decision - Mining algorithms - Model set - Noise
disturbance - Non-stationary time series - Professional fields - Qualitative knowledge
- Quantitative knowledge - Relative coefficients
Classification code:
723 Computer Software, Data Handling and Applications - 903
Information Science - 921 Mathematics - 921.3 Mathematical Transformations - 922.2
Mathematical Statistics - 931.5 Gravitation, Relativity and String Theory
DOI:
10.4028/www.scientific.net/AMM.263-266.1844
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number:
20130515976014
Title:
Model of ink quantity control based on colorimetry system
Authors:
Jiang, Lei1 ; Zhou, Shisheng1 ; Cui, Ying1/蒋磊;周世生;崔颖
Author affiliation:
1
Institute of Printing and Packaging Engineering, Xi'an University of Technology, China
Corresponding author:
Jiang, L. (jiangleiinfo@xaut.edu.cn)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
262
Monograph title:
Advances in Printing and Packaging Technologies
Issue date:
2013
Publication year:
2013
Pages:
258-262
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855720
Document type:
Conference article (CA)
Conference name:
2nd China Academic Conference on Printing and Packaging, CACPP 2012
Conference date:
October 19, 2012 - October 20, 2012
Conference location:
Beijing, China
Conference code:
95114
Sponsor:
China Academy of Printing Technology; Beijing Institute of Graphic Communication;
Green Packing Branch of CSES; School of Printing and Packaging; Xi'an University of Technology;
Et al.
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
In the offset printing process, the ink quantity control in the ink zone, color and ink
quantity transformation algorithm and the establishment of database, are all based on principle
of density measurement. With the establishment and wide spread use of the standard
ISO12647-2 for offset, colorimetric measurement is becoming a tendency. By experimental
research, this article analyses the relationship between ink thickness and colorimetric
value(L*a*b*) by regression method, determines the best ink quantity parameter, establishes the
model of ink quantity controlling based on colorimetry system. © (2013) Trans Tech Publications,
Switzerland.
Number of references:
8
Main heading:
Color
Controlled terms:
Colorimeters - Colorimetry
Uncontrolled terms:
Colorimetric measurement - Experimental research Printing process - Quantity control - Regression method - Transformation algorithm
Wide spreads
Classification code:
741.1 Light/Optics - 941.3 Optical Instruments - 941.4 Optical
Variables Measurements
DOI:
10.4028/www.scientific.net/AMM.262.258
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number:
20130515953752
Title:
Study on solid-liquid interface morphology simulation method and control
parameters of Cz-Si under multi-stream coupled environment
Authors:
Jiang, Lei1 ; Liu, Ding1 ; Zhao, Yue1 ; Liu, Zhi-Shang1/姜雷;刘丁;赵跃;刘志尚
Author affiliation:
1
National United Crystal Growth Equipment and System Integration Engineering Research
Center, Xi'an University of Technology, Xi'an 710048, China
Corresponding author:
Jiang, L. (jjyyeng@gmail.com)
Source title:
Rengong Jingti Xuebao/Journal of Synthetic Crystals
Abbreviated source title:
Rengong Jingti Xuebao
Volume:
41
Issue:
6
Issue date:
December 2012
Publication year:
2012
Pages:
1762-1767
Language:
Chinese
ISSN:
1000985X
CODEN:
RJXUEN
Document type:
Journal article (JA)
Publisher:
Chinese Ceramic Society, Baiwanzhuang, Beijing, 100831, China
Abstract:
The problem of solid-liquid interface morphology which plays an important role in
crystal growth is a moving boundary. Whereas coupled with melt convection especially directed
with forced convection caused by crystal rotation, moving boundary problem is composed of
factors that contain third-party coupling in Cz-Si system. Based on FVM, an iterative solution
method is proposed under multi-stream coupled environment through simulation to solid-liquid
interface morphology and an analysis method is given to research on crystal rotation impact on
interface morphology in this paper. Different from the most simulation results, this paper
compared simulation results with the true interface morphology which is obtained by quick
lift-off method in practice. By comparing the test, simulation results consistent test well.
Number of references:
15
Main heading:
Iterative methods
Controlled terms:
Crystal growth - Crystal orientation - Morphology - Silicon
-
Uncontrolled terms:
Analysis method - Control parameters - Coupled
environment - Crystal rotations - Czochralski silicon - Interface morphologies Iteration method - Iterative solutions - Lift-off methods - Melt convection
Moving boundaries - Moving boundary problems - Multi-stream - Simulation methods
- Solid-liquid interface morphology
Classification code:
712.1.1 Single Element Semiconducting Materials - 921.6 Numerical
Methods - 933.1.1 Crystal Lattice - 933.1.2 Crystal Growth - 951 Materials Science
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number:
20130415932136
Title:
The relationship between viscosity and electrical conductivity of
CaF2-SiO2-Al2O3-CaO-MgO slag system
Authors:
Jiantao, Ju1, 2 ; Zhenlin, Lu1 ; Zhiyuan, Jiao2 ; Jun, Yang2 ; Zhaohui, Zhang2/巨建
涛吕振林;;;;;
Author affiliation:
1
School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048,
China
2
School of Metallurgical Engineering, Xi'an University of Architecture and Technology, Xi'an
710055, China
Corresponding author:
Jiantao, J. (jujiantao_0033@163.com)
Source title:
Materials Science Forum
Abbreviated source title:
Mater. Sci. Forum
Volume:
724
Monograph title:
Eco-Materials Processing and Design XIII
Issue date:
2012
Publication year:
2012
Pages:
460-463
Language:
English
ISSN:
02555476
CODEN:
MSFOEP
ISBN-13:
9783037854396
Document type:
Conference article (CA)
Conference name:
13th International Symposium on Eco-Materials Processing and Design,
ISEPD 2012
Conference date:
January 7, 2012 - January 10, 2012
Conference location:
Guilin, China
Conference code:
93066
Publisher:
Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635,
Switzerland
Abstract:
The relationship between the viscosity and the electrical conductivity of
CaF2-SiO2-Al2O3-CaO-MgO slag system was deduced through theoretical calculation and
experiment. The experiment was designed by quadratic orthogonal rotary regression method.
The slag viscosity and conductivity were measured at 1600°C, and the constant (C) was calculated.
The calculating model between each component mass fraction and constant C was performed,
and the stability of calculating model was also verified by representative slag. The results showed
that the calculating constant (C) of regression model is in good agreement with experimental
values. Thus, the relationship between refining slag viscosity and conductivity using the
formulaeˆ{divides} = C at certain temperature is feasible. © (2012) Trans Tech Publications,
Switzerland.
Number of references:
11
Main heading:
Viscosity
Controlled terms:
Aluminum - Electric conductivity - Experiments - Regression
analysis - Slags
Uncontrolled terms:
CaF2-SiO2-Al2O3-CaO-MgO - Calculating model - Electrical
conductivity - Experimental values - Mass fraction - Quadratic orthogonal rotary
regression - Refining slag - Regression method - Regression model - Slag system
- Slag viscosity - Theoretical calculations
Classification code:
901.3 Engineering Research - 701.1 Electricity: Basic Concepts and
Phenomena - 631.1 Fluid Flow, General - 922.2 Mathematical Statistics - 541.1
Aluminum - 412 Concrete - 406 Highway Engineering - 413 Insulating Materials
DOI:
10.4028/www.scientific.net/MSF.724.460
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
10.
Accession number:
20130415927579
Title:
Algorithm of wavelet texture segmentation based on geometrically regularity
Authors:
Jin, Haiyan1 ; Li, Shuai1 ; Wang, Bingbo1/金海燕;李帅;王冰波
Author affiliation:
1
Xi'an University of Technology, Xi'an, 710048, China
Corresponding author:
Jin, H. (jinhaiyan@xaut.edu.cn)
Source title:
International Journal of Digital Content Technology and its Applications
Abbreviated source title:
Int. J. Digit. Content Technol. Appl.
Volume:
7
Issue:
1
Issue date:
January 15, 2013
Publication year:
2013
Pages:
99-106
Language:
English
ISSN:
19759339
E-ISSN:
22339310
Document type:
Journal article (JA)
Publisher:
Advanced Institute of Convergence Information Technology, Myoungbo Bldg
3F,, Bumin-dong 1-ga, Seo-gu, Busan, 602-816, Korea, Republic of
Abstract:
Aim at the characters of texture image, this paper uses wavelet transform to
extract eight features of each pixel, and then takes the optimal geometrically regular directions of
local area as another feature taking advantage of the geometric flow idea of Bandelet transform.
In terms of those features fuzzy Cmean clustering analysis is applied. Experiments demonstrate
the validity of this proposed method.
Number of references:
12
Main heading:
Wavelet transforms
Controlled terms:
Digital communication systems - Software engineering
Uncontrolled terms:
Bandelet - Fuzzy C mean - Geometric flows Orthogonality - Texture image - Texture segmentation - Wavelet texture
Classification code:
716 Telecommunication; Radar, Radio and Television - 717 Optical
Communication - 718 Telephone Systems and Related Technologies; Line Communications 723.1 Computer Programming - 921.3 Mathematical Transformations
DOI:
10.4156/jdcta.vol7.issue1.12
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
11.
Accession number:
20130415927507
Title:
Asset identification and assignment based on complex information system
Authors:
Li, He-Hua1 ; Wei, Wei2 ; Wu, Chun-Ling3 ; Shen, Peiyi4/;魏嵬;;沈沛意
Author affiliation:
1
Institute of Information security technology, Chongqing College of Electronic Engineering,
Chongqing, China
2
School of Computer Science and Engineering, Xi'an University of Technology, Xi'an, China
3
Chongqing College of Electronic Engineering, Chongqing, China
4
National school of Software, Xidian University, Xi'an 710071, China
Corresponding author:
Li, H.-H. (493885444@qq.com)
Source title:
International Journal of Advancements in Computing Technology
Abbreviated source title:
Intl. J. Adv. Comput. Technolog.
Volume:
5
Issue:
1
Issue date:
January 15, 2013
Publication year:
2013
Pages:
362-368
Language:
English
ISSN:
20058039
E-ISSN:
22339337
Document type:
Journal article (JA)
Publisher:
Advanced Institute of Convergence Information Technology, Myoungbo Bldg
3F,, Bumin-dong 1-ga, Seo-gu, Busan, 602-816, Korea, Republic of
Abstract:
In the process of information system risk assessment, the main work includes:
asset assessment, threat assessment and vulnerability assessment. Assets assessment is the
identification and determination of the three basic attributes of assets -- the confidentiality,
integrity, availability, damage to information system caused by the impact and severity of a
process. This paper introduces how to identify assets and assets of the assignment, provides for
complex information system for the classification of assets, the modular division and asset
identification, as well as the evaluation results, for risk assessment research and implementation
provides a reference case.
Number of references:
11
Main heading:
Damage detection
Controlled terms:
Information systems - Partial discharges - Risk assessment
Uncontrolled terms:
Asset identification - Asset valuation - Complex information
- Evaluation results - Modular division - System risk assessment - Threat assessment
- Vulnerability assessments
Classification code:
421 Strength of Building Materials; Mechanical Properties - 422
Strength of Building Materials; Test Equipment and Methods - 701.1 Electricity: Basic
Concepts and Phenomena - 903.2 Information Dissemination - 922.1 Probability Theory
DOI:
10.4156/ijact.vol5.issue1.40
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
12.
Accession number:
20130415940886
Title:
Polarization control in the coherent optical detection system
Authors:
Li, Tie1 ; Ke, Xizheng2 ; Chen, Juan2 ; Ning, Weigang2/李铁;柯熙政;谌娟;宁伟刚
Author affiliation:
1
Science and Technology on Electormechanical Dynamic Control Laboratory, Xi'an 710065,
China
2
The Faculty of Automation and Information Engineering, Xi'an University of Technology,
Xi'an 710048, China
Corresponding author:
Li, T. (litielee@yahoo.com)
Source title:
Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering
Abbreviated source title:
Hongwai yu Jiguang Gongcheng Infrared Laser Eng.
Volume:
41
Issue:
11
Issue date:
November 2012
Publication year:
2012
Pages:
3069-3074
Language:
Chinese
ISSN:
10072276
Document type:
Journal article (JA)
Publisher:
Chinese Society of Astronautics, P.O. Box 225-32, Tianjin, 300192, China
Abstract:
Coherent detection can increase receiver sensitivity, improve system performance
in optical communication system. However, due to atmospheric effects, the polarization state of
the signal light will be random variation after transmission through the atmosphere, it is difficult
to achieve same light polarization of the two beams directly which affects the detection
efficiency of the system. A new polarization control method was presented for coherent optical
detection system. Based on this structure, a mathematical model was built about the polarization
control of coherent optical detection system. The extruded fiber polarization controller was
selected as polarization control devices in this program. The simulated annealing algorithm was
taken as the system control algorithm and the improved algorithem was used to achieve
automatic polarization control. The whole control process used blind search, with no specific
parameter changes. Simulation results show that the method is suitable for coherent optical
communication to achieve polarization control.
Number of references:
11
Main heading:
Polarization
Controlled terms:
Algorithms - Mathematical models - Optical communication
Uncontrolled terms:
Atmospheric effects - Blind searches - Coherent detection
- Coherent optical communications - Coherent optical detection - Control process Detection efficiency - Parameter changes - Polarization control - Polarization control
devices
- Polarization controllers - Polarization state - Random variation Receiver sensitivity - Signal light - Simulated annealing algorithms - Two beams
Classification code:
711.1 Electromagnetic Waves in Different Media - 717.1 Optical
Communication Systems - 921 Mathematics
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
13.
Accession number:
20130515971436
Title:
Research on the feature selection techniques used in text classification
Authors:
Li, Yan1 ; Chen, Chungang2/李言;
Author affiliation:
1
School of Computer Science and Engineering, Xi'An University of Technology, Xi'an, China
2
School of Human Settlement and Civil Engineering, Xi'An Jiaotong University, Xi'an, China
Corresponding author:
Li, Y.
Source title:
Proceedings - 2012 9th International Conference on Fuzzy Systems and
Knowledge Discovery, FSKD 2012
Abbreviated source title:
Proc. - Int. Conf. Fuzzy Syst. Knowl. Discov., FSKD
Monograph title:
Proceedings - 2012 9th International Conference on Fuzzy Systems and
Knowledge Discovery, FSKD 2012
Issue date:
2012
Publication year:
2012
Pages:
725-729
Article number:
6234223
Language:
English
ISBN-13:
9781467300223
Document type:
Conference article (CA)
Conference name:
2012 9th International Conference on Fuzzy Systems and Knowledge
Discovery, FSKD 2012
Conference date:
May 29, 2012 - May 31, 2012
Conference location:
Chongqing, China
Conference code:
95177
Publisher:
IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC
20036-4928, United States
Abstract:
With the ever-increasing number of digital documents, the ability to automatically
classify those documents both quickly and accurately is becoming more critical and difficult. A
text classification system for Chinese documents is developed in this paper. A HTF-WDF algorithm
is proposed for feature selection. Different from other feature selection algorithms, this method
considers the effect of term frequency. Using the idea of fuzzy feature, the terms with high term
frequency (HTF) are distinguished and appended to the feature list. The features which can
represent the topic of the documents are picked out according to the weighted document
frequencies (WDF), which can avoid the problems of the traditional document frequency (DF)
method. Then the Support Vector Machine (SVM) is used to training the classifier. The proposed
algorithm is verified by representative Chinese documents. The experiment results manifest the
superiority of the proposed algorithm to the traditional DF algorithm. © 2012 IEEE.
Number of references:
10
Main heading:
Algorithms
Controlled terms:
Classification (of information) - Feature extraction - Fuzzy
systems - Learning systems - Support vector machines
Uncontrolled terms:
Chinese documents - Digital Documents - Document
frequency - Feature selection algorithm - Fuzzy features - Selection techniques Term Frequency - Text classification - Text classification systems
Classification code:
716 Telecommunication; Radar, Radio and Television - 716.1
Information Theory and Signal Processing - 723 Computer Software, Data Handling and
Applications - 961 Systems Science
DOI:
10.1109/FSKD.2012.6234223
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
14.
Accession number:
20130515975698
Title:
Path planning for mobile robot with clonal selection algorithm
Authors:
Li, Yi1 ; Song, Zhen-Hui1 ; Zhao, Li1, 2/;;赵理
Author affiliation:
1
ShiJiaZhuang Vocational Technology Institute, Shijiazhuang 050000, China
2
Xi'an University of Technology, Xi'an 710048, China
Corresponding author:
Li, Y. (lliyi_sjz@126.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
256-259
Issue:
PART 1
Monograph title:
Advances in Civil Engineering II
Issue date:
2013
Publication year:
2013
Pages:
2943-2946
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855652
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Civil Engineering and Transportation,
ICCET 2012
Conference date:
October 27, 2012 - October 28, 2012
Conference location:
Guilin, China
Conference code:
95112
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
Aiming at the problem of path planning for a mobile robot, an oriented clonal
selection algorithm is proposed. Firstly, the static environment was expressed by a map with
nodes and links. Secondly, the locations of target and obstacles were defined. Thirdly, an oriented
mutation operator was used to accelerate the evolutionary progress. In this way, we can find an
optimal solution with proposed oriented clonal algorithm. Experiment results demonstrate that
the algorithm is simple, effective, to solve the problem of robot path planning in a static
environment. © (2013) Trans Tech Publications, Switzerland.
Number of references:
4
Main heading:
Motion planning
Controlled terms:
Algorithms - Civil engineering - Mobile robots
Uncontrolled terms:
Clonal algorithm - Clonal selection algorithms - Evolutionary
progress - Mutation operators - Nodes and links - Optimal solutions - Robot
path-planning - Static environment
Classification code:
409 Civil Engineering, General - 723 Computer Software, Data
Handling and Applications - 723.4 Artificial Intelligence - 731.5 Robotics - 921
Mathematics
DOI:
10.4028/www.scientific.net/AMM.256-259.2943
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
15.
Accession number:
20130415932768
Title:
Photo response non-uniformity correction of high dynamic range video system
Authors:
Liang, Lei1 ; Yu, NingMei1 ; Li, JianWei1/;余宁梅;
Author affiliation:
1
Electronic Department, Xi'an University of Technology, China
Corresponding author:
Liang, L. (lianglei8568@163.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
263-266
Issue:
PART 1
Monograph title:
Information Technology Applications in Industry
Issue date:
2013
Publication year:
2013
Pages:
2524-2529
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855744
Document type:
Conference article (CA)
Conference name:
2012 International Conference on Information Technology and
Management Innovation, ICITMI 2012
Conference date:
November 10, 2012 - November 11, 2012
Conference location:
Guangzhou, China
Conference code:
95052
Sponsor:
Information Science School of Guangdong; University of Business Studies
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
In order to solve the problem of the photo response non-uniformity (PRNU) for
High Dynamic Range (HDR) video system, this paper discusses the causes of the problem and the
common solution, and then proposed a new non-uniformity correction approach based on the
reference source for HDR video system. This approach use high-pass filter to calibration image in
Frequency domain to get the correction matrix of one level light conditions at first. And then
performs an inverse Fourier transform to the spatial domain. Finally calculate the difference
between the correction matrix and the target image to obtain the corrected results. The
experimental result indicates that the approach has good effect on dealing with non-uniformity
of the HDR images and the definition has been greatly improved. © (2013) Trans Tech
Publications, Switzerland.
Number of references:
8
Main heading:
Information technology
Controlled terms:
Frequency domain analysis - High pass filters
Uncontrolled terms:
Correction matrix - Frequency domains - Frequency-domain
filtering - HDR - HDR image - HDR video - High dynamic range - High dynamic
range video - Inverse Fourier transforms - Light conditions
- Nonuniformity Nonuniformity correction - Photo response non-uniformity - PRNU - Reference source
- Spatial domains - Target images - Video systems
Classification code:
703.1.1 Electric Network Analysis - 703.2 Electric Filters - 903
Information Science
DOI:
10.4028/www.scientific.net/AMM.263-266.2524
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
16.
Accession number:
20130515975376
Title:
Combination of geological radar and video surveillance in the tunnel geological
prediction
Authors:
Liu, Bo1 ; Li, Ning1 ; Lv, Gao1/;李宁;
Author affiliation:
1
Institution of Geotechnical Engineering, Xi'an University of Technology, Xi'an 710048, China
Corresponding author:
Liu, B. (251561659@qq.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
256-259
Issue:
PART 1
Monograph title:
Advances in Civil Engineering II
Issue date:
2013
Publication year:
2013
Pages:
1206-1211
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855652
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Civil Engineering and Transportation,
ICCET 2012
Conference date:
October 27, 2012 - October 28, 2012
Conference location:
Guilin, China
Conference code:
95112
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
This paper presents the combination method between geological radar and video
surveillance in the tunnel geological prediction, in case the randomness in judgment for the
target body prone in the current geological advanced prediction. In order to improve the accuracy,
this method conducts geological advanced prediction by comprehensive of geological radar,
geological and construction information. In order to verify the effect of this method, we
conducted a field trial in the Yululing tunnel. The field trial results are very well. And the accuracy
of geological advanced prediction has been improved. This method reached the expected target
for the accuracy which we want to improve of geological advanced prediction. © (2013) Trans
Tech Publications, Switzerland.
Number of references:
12
Main heading:
Forecasting
Controlled terms:
Civil engineering - Ground penetrating radar systems Monitoring - Radar - Security systems
Uncontrolled terms:
Combination method - Construction information - Field trial
- Geological predictions - Geological radar - Tunnel projects - Video surveillance
Classification code:
943 Mechanical and Miscellaneous Measuring Instruments - 942
Electric and Electronic Measuring Instruments - 941 Acoustical and Optical Measuring
Instruments - 944 Moisture, Pressure and Temperature, and Radiation Measuring
Instruments - 921 Mathematics - 716.2 Radar Systems and Equipment - 409 Civil
Engineering, General - 914.1 Accidents and Accident Prevention
DOI:
10.4028/www.scientific.net/AMM.256-259.1206
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
17.
Accession number:
20130515975216
Title:
Study on stress and deformation of earth-rock cofferdam and concrete cutoff wall
on deep overburden
Authors:
Liu, Hai-wei1 ; Dang, Fa-ning1 ; Yi, Min2/;党发宁;
Author affiliation:
1
Institute of Geotechnical Engineering, Xi'an University of Technology, Xi'an 710048, China
2
Shann Xi Province Institute of Water Resource and Electric Power Investigation and Design,
China
Corresponding author:
Liu, H.-W. (lhw_heavy@163.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
256-259
Issue:
PART 1
Monograph title:
Advances in Civil Engineering II
Issue date:
2013
Publication year:
2013
Pages:
383-387
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855652
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Civil Engineering and Transportation,
ICCET 2012
Conference date:
October 27, 2012 - October 28, 2012
Conference location:
Guilin, China
Conference code:
95112
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
The earth-rock cofferdam on deep overburden is the main study object. The
cofferdam filling and dam excavation process were numerical simulated using FEM code
ANSYS.Main research focused on stress and deformation characteristic of cofferdam and concrete
cutoff wall during completion and excavation process.Analysis showed that displacements of
cofferdam and cutoff wall distribute well in x, y, z directions with acceptable magnitude, stress
characteristic values are less than design standard. The results indicate that cofferdam and cutoff
wall are safe and stable both in construction and operation. © (2013) Trans Tech Publications,
Switzerland.
Number of references:
6
Main heading:
Cofferdams
Controlled terms:
Civil engineering - Deformation - Design - Excavation Finite element method
Uncontrolled terms:
Concrete cutoff wall - Cutoff wall - Deep overburden Design standard - Earth-rock - Stress and deformation - Stress characteristics Z-directions
Classification code:
405.2 Construction Methods - 408 Structural Design - 409 Civil
Engineering, General - 421 Strength of Building Materials; Mechanical Properties - 422
Strength of Building Materials; Test Equipment and Methods - 921.6 Numerical Methods
DOI:
10.4028/www.scientific.net/AMM.256-259.383
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
18.
Accession number:
20130515974875
Title:
2D simulation of effects of position of baffles on the removal rate of solids in a
sedimentation tank
Authors:
Liu, Y.L.1 ; Zhang, P.1 ; Wei, W.L.1/刘玉玲;张沛;魏文礼
Author affiliation:
1
Institute of Hydraulic Engineering, Xi'an University of Technology, Xi'an, China
Corresponding author:
Liu, Y. L. (liuyuling@xaut.edu.cn)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
253-255
Issue:
PART 1
Monograph title:
Sustainable Development of Urban Infrastructure
Issue date:
2013
Publication year:
2013
Pages:
861-864
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855645
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Civil Engineering and Transportation,
ICCET 2012
Conference date:
October 27, 2012 - October 28, 2012
Conference location:
Guilin, China
Conference code:
95112
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
In this paper, we use solid-liquid two-phase mixture model and the k-Ε turbulence
model to numerically simulate the effects of the position of baffles on the removal rate of solids
in a sedimentation tank. The PISO algorithm is used to decouple velocity and pressure. The
distribution of sludge concentration on different cross-sections is obtained by the proposed
model. © (2013) Trans Tech Publications, Switzerland.
Number of references:
2
Main heading:
Settling tanks
Controlled terms:
Civil engineering - Turbulence models
Uncontrolled terms:
2D simulations - Hydraulic characteristic - PISO algorithm Position of baffles - Removal rate - Simulation - Sludge concentration - Solid-liquid
- Two-phase mixture models
Classification code:
409 Civil Engineering, General - 443.1 Atmospheric Properties 445.1 Water Treatment Techniques
DOI:
10.4028/www.scientific.net/AMM.253-255.861
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
19.
Accession number:
20130515975631
Title:
2D simulation of flow field of horizontal sedimentation tank
Authors:
Liu, Y.L.1 ; Lv, B.1 ; Zhang, P.1 ; Wei, W.L.1/刘玉玲;吕彬;张沛;魏文礼
Author affiliation:
1
Institute of Hydraulic Engineering, Xian University of Technology, Xi'an, China
Corresponding author:
Wei, W. L. (wwl_p@126.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
256-259
Issue:
PART 1
Monograph title:
Advances in Civil Engineering II
Issue date:
2013
Publication year:
2013
Pages:
2598-2601
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855652
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Civil Engineering and Transportation,
ICCET 2012
Conference date:
October 27, 2012 - October 28, 2012
Conference location:
Guilin, China
Conference code:
95112
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
In this paper, we use 3D time-averaged equations and the 3D k-Ε turbulence
model to numerically simulate the flow in a horizontal sedimentation tank. The PISO algorithm is
used to couple velocity and pressure. The results show that the model can provide a reference in
designing sedimentation tanks. © (2013) Trans Tech Publications, Switzerland.
Number of references:
6
Main heading:
Settling tanks
Controlled terms:
Civil engineering - Computer simulation - Three dimensional
computer graphics - Turbulence - Turbulence models
Uncontrolled terms:
2D simulations - Horizontal sedimentation tan - PISO
algorithm - Time-averaged equations
Classification code:
409 Civil Engineering, General - 443.1 Atmospheric Properties 445.1 Water Treatment Techniques - 723.5 Computer Applications
DOI:
10.4028/www.scientific.net/AMM.256-259.2598
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
20.
Accession number:
20130515975635
Title:
Simulation of a free surface flow over a vertical weir
Authors:
Liu, Y.L.1 ; Bai, Y.1/刘玉玲;
Author affiliation:
1
Institute of Hydraulic Engineering, Xi'an University of Technology, Xi'an, China
Corresponding author:
Liu, Y. L. (liuyuling_2@126.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
256-259
Issue:
PART 1
Monograph title:
Advances in Civil Engineering II
Issue date:
2013
Publication year:
2013
Pages:
2616-2620
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855652
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Civil Engineering and Transportation,
ICCET 2012
Conference date:
October 27, 2012 - October 28, 2012
Conference location:
Guilin, China
Conference code:
95112
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
In this paper the numerical simulation of a free surface flow over a vertical weir
with in turns of a scour pool and a small hump weir is presented. Since in this case few of
calculative examples adds scour pool and small hump weir in the model, it is meaningful to
compute this example using a numerical software which is named Fluent 6.3. The numerical
method used consists of Navier-Stokes turbulence solver and k-Ε model together with a VOF
method and PISO algorithm in pave meshes. Thus, the sketches of flow fields on each typical time
point and velocity distributions on each section on 16s are provided to describe flow field
accurately. A very good quantitative consequence which accords with hydraulics theoretical
analysis has been obtained. © (2013) Trans Tech Publications, Switzerland.
Number of references:
7
Main heading:
Weirs
Controlled terms:
Civil engineering - Computer simulation - Flow fields Hydraulic structures - Lakes - Turbulence
Uncontrolled terms:
Free-surface flow - Navier-Stokes turbulence - Numerical
software - PISO algorithm - Quantitative consequences - Time points - VOF
method - VOF model
Classification code:
723.5 Computer Applications - 631.1 Fluid Flow, General - 611
Hydroelectric and Tidal Power Plants - 441.1 Dams - 441 Dams and Reservoirs; Hydro
Development - 409 Civil Engineering, General - 407 Maritime and Port Structures; Rivers
and Other Waterways
DOI:
10.4028/www.scientific.net/AMM.256-259.2616
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
21.
Accession number:
20130415932691
Title:
Failure mode recognition clustering algorithm based on manifold learning
Authors:
Lou, Zhigang1 ; Liu, Hongzhao1/娄志刚;刘宏昭
Author affiliation:
1
The Faculty of Mechanical and Precision Instrument Engineering, Xi'an University of
Technology, Xi'an, 710048, China
Corresponding author:
Lou, Z. (louzg@163.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
263-266
Issue:
PART 1
Monograph title:
Information Technology Applications in Industry
Issue date:
2013
Publication year:
2013
Pages:
2126-2130
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855744
Document type:
Conference article (CA)
Conference name:
2012 International Conference on Information Technology and
Management Innovation, ICITMI 2012
Conference date:
November 10, 2012 - November 11, 2012
Conference location:
Guangzhou, China
Conference code:
95052
Sponsor:
Information Science School of Guangdong; University of Business Studies
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
Manifold learning is a new unsupervised learning method. Its main purpose is to
find the inherent law of generated data sets. Be used for high dimensional nonlinear fault
samples for learning, in order to identify embedded in high dimensional data space in the low
dimensional manifold, can be effective data found the essential characteristics of fault
identification. In many types of fault, sometimes often failure and normal operation of the
equipment of some operation similar to misjudgment, such as oil pipeline transportation process,
pipeline regulating pump, adjustable valve, pump switch, normal operation and pipeline leakage
fault condition similar spectral characteristics, thus easy for pipeline leakage cause mistakes. This
paper uses the manifold learning algorithm for fault pattern clustering recognition, and through
experiments on the algorithm is evaluated. © (2013) Trans Tech Publications, Switzerland.
Number of references:
5
Main heading:
Clustering algorithms
Controlled terms:
Information technology - Learning algorithms - Noise abatement
- Pattern recognition
Uncontrolled terms:
Data sets - Essential characteristic - Fault identifications Fault patterns - High-dimensional - High-dimensional data space - Laplacian
eigenmaps - Low-dimensional manifolds - Manifold learning - Manifold learning
algorithm
- Mode recognition - Nonlinear faults - Normal operations - Oil
pipelines - Pipeline leakage - Regulating pumps - Spectral characteristics Unsupervised learning method
Classification code:
716 Telecommunication; Radar, Radio and Television - 721 Computer
Circuits and Logic Elements - 723 Computer Software, Data Handling and Applications 751.4 Acoustic Noise - 903 Information Science
DOI:
10.4028/www.scientific.net/AMM.263-266.2126
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
22.
Accession number:
20130415932110
Title:
Effect of impact angle on erosion wear behaviours of SiCp/cast iron surface
composite
Authors:
Lu, Zhenlin1 ; Jin, Han1 ; Zhou, Yongxin1 ; Xie, Hui1/吕振林;;周永新;谢辉
Author affiliation:
1
School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048,
China
Corresponding author:
Lu, Z. (lvzl2002@xaut.edu.cn)
Source title:
Materials Science Forum
Abbreviated source title:
Mater. Sci. Forum
Volume:
724
Monograph title:
Eco-Materials Processing and Design XIII
Issue date:
2012
Publication year:
2012
Pages:
339-342
Language:
English
ISSN:
02555476
CODEN:
MSFOEP
ISBN-13:
9783037854396
Document type:
Conference article (CA)
Conference name:
13th International Symposium on Eco-Materials Processing and Design,
ISEPD 2012
Conference date:
January 7, 2012 - January 10, 2012
Conference location:
Guilin, China
Conference code:
93066
Publisher:
Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635,
Switzerland
Abstract:
The slurry erosion wear performances of the SiCp/cast iron surface composite,
which was prepared by infiltrating molten cast iron into SiC particles preforms, were studied on
self-made slurry inject erosion wear machine. The results show that the erosion wear rate of the
SiCp/cast iron surface composite would be the lowest at impact angle of 30°, and the largest at
impact angle of 60°. The erosion wear rate increases gradually when impact angle is changed
from 30° to 60°, and then decreased with increasing the impact angle. The erosion wear
mechanism of the SiCp/cast iron surface composite is dominated by cutting and grooving at low
impact angle, and by fatigue spalling and cutting at high impact angle. For the gray cast iron, the
erosion wear rate of would be increased gradually with the increase of impact angle, reaching the
peak value at 90°, which indicates the typical characteristics of brittle material in slurry erosion
wear process. © (2012) Trans Tech Publications, Switzerland.
Number of references:
8
Main heading:
Wear of materials
Controlled terms:
Cast iron - Silicon carbide - Tribology
Uncontrolled terms:
Erosion wear - Gray cast iron - Grey cast iron - High
impact - Impact angles - Iron surface - Peak values - SiC particles - Slurry
erosion - Surface composites
Classification code:
421 Strength of Building Materials; Mechanical Properties - 545.2
Iron Alloys - 804.2 Inorganic Compounds - 931 Classical Physics; Quantum Theory;
Relativity - 951 Materials Science
DOI:
10.4028/www.scientific.net/MSF.724.339
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
23.
Accession number:
20130515975977
Title:
The theory of the density-based gravure spot-color matching
Authors:
Luo, Rubai1, 2 ; Jiang, Nan1, 2 ; Zhou, Shisheng1, 2 ; Zhang, Yan1, 2/罗如柏; ;蒋楠;
周世生;
Author affiliation:
1
School of Printing and Packing Engineering, Xi'an University of Technology, Xi'an, China
2
Shaanxi Key Laboratory of Printing and Packing Engineering, Xi'an University of Technology,
Xi'an, China
Corresponding author:
Luo, R. (luorubai@xaut.edu.cn)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
262
Monograph title:
Advances in Printing and Packaging Technologies
Issue date:
2013
Publication year:
2013
Pages:
69-73
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855720
Document type:
Conference article (CA)
Conference name:
2nd China Academic Conference on Printing and Packaging, CACPP 2012
Conference date:
October 19, 2012 - October 20, 2012
Conference location:
Beijing, China
Conference code:
95114
Sponsor:
China Academy of Printing Technology; Beijing Institute of Graphic Communication;
Green Packing Branch of CSES; School of Printing and Packaging; Xi'an University of Technology;
Et al.
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
Spot-color is widely used in modern package printing technology. In order to use
of computer techniques in calculation the formula of spot-color, an algorithm of formula
calculation for the gravure spot-color was proposed in this paper. Firstly, the spot-color was
divided into ten color areas based on the theory of Munsell color system, and in IGT gravure
testing system, the color proofs were printed for each color area, according to different ratio of
the cyan, magenta, yellow and white ink, in order to gain the data of mathematics modeling.
Then, the algorithm of matching spot-color based on Masking Equation was provided, after
measuring and analyzing of the proofs. Moreover, the results of experiment in blue color area
show that the algorithm, which was proposed, has good accuracy of matching spot-color. Finally,
using the C++ programming language and MySQL database, the prototype computer aided
gravure spot-color matching system was developed, the results of operation show that the
software is available. © (2013) Trans Tech Publications, Switzerland.
Number of references:
7
Main heading:
Color matching
Controlled terms:
Algorithms - Color - Computer software - Printing Software engineering
Uncontrolled terms:
Color area - Color proofs - Computer aided - Computer
techniques - Density-based - Gravure printing - Masking equation - Matching
system - Mathematics modeling - Munsell color system
- MySQL database Package printing technology - Spot-color matching - Testing systems
Classification code:
723 Computer Software, Data Handling and Applications - 723.1
Computer Programming - 741.1 Light/Optics - 745.1 Printing - 801 Chemistry - 803
Chemical Agents and Basic Industrial Chemicals
DOI:
10.4028/www.scientific.net/AMM.262.69
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
24.
Accession number:
20130415941254
Title:
Study on corrosion behavior of hot extruded Mg-1Ca-0.5Mn alloy in sodium
chloride water solution
Authors:
Ma, Ying1, 2 ; Zhang, Zhongming1 ; Wang, Ting1 ; Guo, Yang1 ; Xu, Chunjie1/;张忠
明;;;徐春杰
Author affiliation:
1
School of Materials Science and Engineering, Xi'an University of Technology, Xi'an, Shaanxi,
710048, China
2
Department of Mechanical Engineering, Xi'an Aerotechnical College, Xi'an, Shaanxi, 710077,
China
Corresponding author:
Ma, Y. (rainmy905@163.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
268
Issue:
PART 1
Monograph title:
Materials, Mechanical Engineering and Manufacture
Issue date:
2013
Publication year:
2013
Pages:
330-335
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855799
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Applied Mechanics, Materials and
Manufacturing, ICAMMM 2012
Conference date:
November 17, 2012 - November 18, 2012
Conference location:
Changsha, China
Conference code:
95054
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
The corrosion behavior of extruded Mg-1Ca-0.5Mn (weight percent)alloy in 0.9%
sodium chloride water solution was investigated by using mass-loss measurement and
electrochemical method. The results show that filiform corrosion and pitting corrosion occur
during immersion corrosion process. The average corrosion rate gradually decreases as
immersion time increases; it is 0.53 mm/a after immersion at 37° for 11 days. The corrosion
current density icorr and corrosion potential Ecorr of the alloy is 0.042 mA/cm2 and -1.60V,
respectively. The instantaneous corrosion rate is 0.88 mm/a. Mg-1Ca-0.5Mn alloy erodes by
continuous dissolution. The corrosion product Mg(OH)2 layer surrounding the magnesium alloy
can decrease the corrosion rate. The erosion process of the magnesium alloy is controlled by
cathodic diffusion. © (2013) Trans Tech Publications, Switzerland.
Number of references:
11
Main heading:
Corrosion rate
Controlled terms:
Calcium - Corrosion - Corrosive effects - Magnesium alloys Manganese - Manganese removal (water treatment) - Manufacture - Pitting Sodium chloride
Uncontrolled terms:
Continuous dissolution - Corrosion behavior - Corrosion
current densities - Corrosion potentials - Corrosion process - Corrosion products ELectrochemical methods - Erosion process - Filiform corrosion - Immersion time
Mass loss - Mass-loss measurement - NaCl solution - Polarization curves - Water
solutions - Weight percent
Classification code:
445.1 Water Treatment Techniques - 537.1 Heat Treatment
Processes - 539.1 Metals Corrosion - 543.2 Manganese and Alloys - 549.2 Alkaline
Earth Metals - 804.2 Inorganic Compounds
DOI:
10.4028/www.scientific.net/AMM.268-270.330
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
25.
Accession number:
20130415941261
Title:
Microstructure and high temperature mechanical properties of Mg-1Si-1Y alloy
Authors:
Ma, Ying1, 2 ; Zhang, Zhongming1 ; Lv, Zhenlin1 ; Xu, Chunjie1/;张忠明;吕振林;徐
春杰
Author affiliation:
1
School of Materials Science and Engineering, Xi'an University of Technology, Xi'an, Shaanxi,
710048, China
2
Department of Mechanical Engineering, Xi'an Aeronautical University, Xi'an, Shaanxi,
710077, China
Corresponding author:
Ma, Y. (rainmy905@163.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
268
Issue:
PART 1
Monograph title:
Materials, Mechanical Engineering and Manufacture
Issue date:
2013
Publication year:
2013
Pages:
365-370
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855799
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Applied Mechanics, Materials and
Manufacturing, ICAMMM 2012
Conference date:
November 17, 2012 - November 18, 2012
Conference location:
Changsha, China
Conference code:
95054
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
Mg-1Si alloy doped with 1%Y was prepared by in-situ reaction synthesis. The effect
of hot extrusion on the microstructure and elevated-temperature mechanical properties of the
alloy was studied. The microstructures were analyzed by optical microscopy, scanning electron
microscopy with energy dispersive X-ray spectroscopy and X-ray diffractometry. The results show
that as-cast Mg-1Si-1Y alloy consists of dendritic α-Mg phase, eutectic needle-like Mg2Si phase
and Mg24+xY5 phase precipitated from α-Mg, Mg2Si can be modified and refined by yttrium, and
α-Mg grains can be refined by dynamic recrystallization occurred in hot extrusion process. The
tensile strength and elongation of the alloy at ambient temperature are improved prominently by
hot extrusion. The tensile strength and elongation of the extruded alloy is 185.3MPa and 24.3%
at 120°. The improved elevated-temperature properties of the alloy are ascribed to the
fine-grained strengthening and dispersion strengthening from Mg2Si and Mg24+xY5 particles. ©
(2013) Trans Tech Publications, Switzerland.
Number of references:
15
Main heading:
Silicon alloys
Controlled terms:
Alloying - Cerium alloys - Dispersions - Dynamic
recrystallization - Extrusion dies - Magnesium - Manufacture - Mechanical
properties - Microstructure - Optical microscopy
- Scanning electron microscopy Silicon - Synthesis (chemical) - Tensile strength - X ray diffraction analysis - X ray
spectroscopy - Yttrium - Yttrium alloys
Uncontrolled terms:
As-cast - Dispersion strengthening - Energy dispersive X ray
spectroscopy - Extruded alloys - High temperature mechanical properties - Hot
extrusion - Hot extrusion process - In-situ reaction synthesis - Needle-like
Classification code:
951 Materials Science - 933 Solid State Physics - 816.2 Plants and
Machinery for Plastics and Other Polymers - 802.2 Chemical Reactions - 801 Chemistry 741.1 Light/Optics - 549.3 Nonferrous Metals and Alloys excluding Alkali and Alkaline Earth
Metals - 549.2 Alkaline Earth Metals - 547.2 Rare Earth Metals - 537.1 Heat Treatment
Processes - 531.1 Metallurgy - 422 Strength of Building Materials; Test Equipment and
Methods - 421 Strength of Building Materials; Mechanical Properties
DOI:
10.4028/www.scientific.net/AMM.268-270.365
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
26.
Accession number:
20130515976402
Title:
Color texture recongnition methods base on GLCM-Gabor and application in print
detection
Authors:
Ren, Linghui1 ; Zhang, Haiyan2 ; Guo, Kaiming2/任玲辉;张海燕;郭凯明
Author affiliation:
1
The Faculty of Mechanical and Precision Instrument Engineering, Xi'an University of
Technology, China
2
The Faculty of Printing and Packaging Engineering, Xi'an University of Technology, China
Corresponding author:
Zhang, H. (hyzhang@xaut.edu.cn)
Source title:
International Journal of Advancements in Computing Technology
Abbreviated source title:
Intl. J. Adv. Comput. Technolog.
Volume:
4
Issue:
21
Issue date:
2012
Publication year:
2012
Pages:
567-573
Language:
English
ISSN:
20058039
E-ISSN:
22339337
Document type:
Journal article (JA)
Publisher:
Advanced Institute of Convergence Information Technology, Myoungbo Bldg
3F,, Bumin-dong 1-ga, Seo-gu, Busan, 602-816, Korea, Republic of
Abstract:
The color texture is an important information in the image recognition. In this
paper, we put forward a new method to extract the color image texture. Firstly, we choose the
suitable color space for improve recognition rate of color texture. Secondly, we combination
GLCM(Gray Level Cooccurrence Matrix)with Gabor filtering to extract the color image texture.
Finally, we used the SVM(Support Vector Machine)classifier to verify the correct of the method
we proposed, the method can distinguish real and false between RMB, Tests show that the
accuracy is 98.18%.
Number of references:
10
Main heading:
Textures
Controlled terms:
Color - Color image processing - Image enhancement - Image
recognition - Image texture - Support vector machines
Uncontrolled terms:
Color images - Color space - Color textures - Gabor Gabor filtering - GLCM - Gray level co-occurrence matrix - Recognition rates SVM(support vector machine) - Texture recognition
Classification code:
723 Computer Software, Data Handling and Applications - 723.2
Data Processing and Image Processing - 741.1 Light/Optics - 933 Solid State Physics
DOI:
10.4156/ijact.vol4.issue21.67
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
27.
Accession number:
20130515975235
Title:
The development of a one-parameter model for the soil-water characteristic curve
in loess gully regions
Authors:
Song, XiaoYu1 ; Li, HuaiYou2 ; Shi, WenJuan1/宋孝玉;李怀有;史文娟
Author affiliation:
1
Northwest Key Laboratory of Water Resource and Environment Ecology, Ministry of
Education, Xi'an University of Technology, Xi'an, Shaanxi 710048, China
2
Xifeng Experiment Station of soil and water conservation, Yellow River conservancy
committee, Xifeng, Gansu 745000, China
Corresponding author:
Song, X. (songxy@xaut.edu.cn)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
256-259
Issue:
PART 1
Monograph title:
Advances in Civil Engineering II
Issue date:
2013
Publication year:
2013
Pages:
488-493
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855652
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Civil Engineering and Transportation,
ICCET 2012
Conference date:
October 27, 2012 - October 28, 2012
Conference location:
Guilin, China
Conference code:
95112
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
It is important to understand soil hydraulic properties in order to predict the
movement of water and solutes such as pollutants. To this end, 55 soil samples were collected
from different areas of the Nanxiaohegou basin and used to generate soil-water characteristic
curves. These were then fitted using the power-, exponential-, and logarithmic versions of the
Gardner model; the logarithmic model yielded the best fit overall. The logarithmic model was
further simplified to yield a one-parameter model for estimating the soil-water characteristic
curve within the basin, and it was demonstrated that the value of the single parameter is
dependent on the topography and usage of the land. © (2013) Trans Tech Publications,
Switzerland.
Number of references:
20
Main heading:
Geologic models
Controlled terms:
Civil engineering - Soils - Topography - Water pollution
Uncontrolled terms:
Best fit - Characteristic parameter - Land use pattern Logarithmic models - Single parameter - Soil hydraulic properties - Soil sample Soil-water characteristic curve
Classification code:
409 Civil Engineering, General - 453 Water Pollution - 481.1
Geology - 483.1 Soils and Soil Mechanics - 951 Materials Science
DOI:
10.4028/www.scientific.net/AMM.256-259.488
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
28.
Accession number:
20130415927590
Title:
An efficient interest point detector based on double pyramids structure
Authors:
Sui, Liansheng1 ; Xin, Meiting1 ; Liu, Lijin1/隋连升;;
Author affiliation:
1
Xi'an University of Technology, China
Corresponding author:
Sui, L. (liudua2010@gmail.com)
Source title:
International Journal of Digital Content Technology and its Applications
Abbreviated source title:
Int. J. Digit. Content Technol. Appl.
Volume:
7
Issue:
1
Issue date:
January 15, 2013
Publication year:
2013
Pages:
195-203
Language:
English
ISSN:
19759339
E-ISSN:
22339310
Document type:
Journal article (JA)
Publisher:
Advanced Institute of Convergence Information Technology, Myoungbo Bldg
3F,, Bumin-dong 1-ga, Seo-gu, Busan, 602-816, Korea, Republic of
Abstract:
In this paper we propose an efficient interest points detection algorithm that is
invariant to scale, rotation and translation as well as robust to illumination changes and limited
changes of viewpoint. First, we compute one pyramid representation in which every layer is used
to detect the initial points with the Harris detector. Second, we compute another pyramid
representation based on the difference of Gaussians in which the stable points are determined
with the local maximum over adjacent layers. For a local structure in an image, the proposed
algorithm can detect interest points in a certain range of scales to represent this local feature,
and the localizations of these points are slightly different. Thus, the algorithm can obtain the high
number of interest points and increase the probability of correct matches between the gradual
transformation images of the same scene. We present a comparative evaluation between the
proposed algorithm and the Harris-Laplace detector, and show the proposed algorithm not only
obtains high matching scores but also consumes less time for different scenes.
Number of references:
21
Main heading:
Image matching
Controlled terms:
Algorithms - Detectors
Uncontrolled terms:
Adjacent layers - Comparative evaluations - Detection
algorithm - Difference of Gaussians - Gradual transformations - Harris detector Illumination changes - Initial point - Interest point - Local feature
- Local
maximum - Local structure - Matching score - Point detectors - Stable points
Classification code:
723 Computer Software, Data Handling and Applications - 741 Light,
Optics and Optical Devices - 914 Safety Engineering - 921 Mathematics
DOI:
10.4156/jdcta.vol7.issue1.23
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
29.
Accession number:
20130415932109
Title:
Effect of Ti, Al and Cu addition on structural evolution and phase constitution of
FeCoNi system equimolar alloys
Authors:
Wang, Xiao1 ; Xie, Hui1 ; Jia, Lei1 ; Lu, Zhenlin2/王晓;谢辉;贾磊;吕振林
Author affiliation:
1
School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048,
China
2
School of Materials Science and Engineering, Henan University of Science and Technology,
Luoyang 471003, China
Corresponding author:
Wang, X. (xautwangxiao@163.com)
Source title:
Materials Science Forum
Abbreviated source title:
Mater. Sci. Forum
Volume:
724
Monograph title:
Eco-Materials Processing and Design XIII
Issue date:
2012
Publication year:
2012
Pages:
335-338
Language:
English
ISSN:
02555476
CODEN:
MSFOEP
ISBN-13:
9783037854396
Document type:
Conference article (CA)
Conference name:
13th International Symposium on Eco-Materials Processing and Design,
ISEPD 2012
Conference date:
January 7, 2012 - January 10, 2012
Conference location:
Guilin, China
Conference code:
93066
Publisher:
Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635,
Switzerland
Abstract:
FeCoNi system equimolar alloys were fabricated by a vacuum arc melting. The
phase constitution of FeCoNi system alloys was determined by XRD analysis and the
microstructure was observed by OM. The comprehensive atomic radius δ, the mixing enthalpy
ΔHmix and the mixing entropy ΔSmix of alloys were also calculated according to relevant
equations. The results show that the addition of Ti, Al and Cu has an obvious influence on the
microstructure and phase constitution of FeCoNi system equimolar alloys. Single Ti addition
resulted in almost entire solid solution with a typical dendrite growth character and a little
unknown phase. However, further addition of Al, Cu or Al+Cu into the FeCoNiTi equimolar alloys
led to the occurrence of an entire solution phase with dendrite, coarse dendrite, and rosette
dendrite respectively. Such a phenomena suggested that the mixing entropy caused by the
increase of components number rather than the comprehensive atomic radius between the
elements or the mixing enthalpy of the alloy systems might be responsible for the formation of
almost entire solid solution in FeCoNi system equimolar alloys. © (2012) Trans Tech Publications,
Switzerland.
Number of references:
11
Main heading:
Titanium alloys
Controlled terms:
Alloys - Aluminum - Cerium alloys - Enthalpy Microstructure - Mixing - Solid solutions - Vacuum applications
Uncontrolled terms:
Addition of Al - Alloy system - Atomic radius Compound - Cu addition - Dendrite growth - Equi-molar alloys - Mixing enthalpy
- Mixing entropy - Phase constitution
- Solution phase - Structural evolution - Ti
addition - Vacuum arc melting - XRD analysis
Classification code:
802.3 Chemical Operations - 641.1 Thermodynamics - 633.1
Vacuum Applications - 933 Solid State Physics - 547.2 Rare Earth Metals - 541.1
Aluminum - 531.1 Metallurgy - 542.3 Titanium and Alloys
DOI:
10.4028/www.scientific.net/MSF.724.335
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
30.
Accession number:
20130515971344
Title:
A quick value reduction algorithm of rough set
Authors:
Wang, Xiaofan1 ; Baoshu Wang2/;
Author affiliation:
1
School of Computer Science and Technology, Xi'An University of Technology, Xi'an, 710048,
China
2
School of Computer Science and Technology, Xidian University, Xian, 710071, China
Corresponding author:
Wang, X. (wangxfok@xaut.edu.cn)
Source title:
Proceedings - 2012 9th International Conference on Fuzzy Systems and
Knowledge Discovery, FSKD 2012
Abbreviated source title:
Proc. - Int. Conf. Fuzzy Syst. Knowl. Discov., FSKD
Monograph title:
Proceedings - 2012 9th International Conference on Fuzzy Systems and
Knowledge Discovery, FSKD 2012
Issue date:
2012
Publication year:
2012
Pages:
216-219
Article number:
6233931
Language:
English
ISBN-13:
9781467300223
Document type:
Conference article (CA)
Conference name:
2012 9th International Conference on Fuzzy Systems and Knowledge
Discovery, FSKD 2012
Conference date:
May 29, 2012 - May 31, 2012
Conference location:
Chongqing, China
Conference code:
95177
Publisher:
IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC
20036-4928, United States
Abstract:
In order to get a value reduction quickly, this paper puts forwards a new algorithm
of value reduction based on attribute-value-tree model in attribute order and proves it's
correctness. A attribute reduction and value reduction can be got quickly at the same time from a
discrete table in this algorithm. The computational complexity of reduction is changed to O(U2C)
where U and C are the number of objects and attributes. It is fit to process large data and
validated to improve the efficiency by tests. © 2012 IEEE.
Number of references:
21
Main heading:
Rough set theory
Controlled terms:
Algorithms - Decision tables - Forestry - Fuzzy systems Trees (mathematics)
Uncontrolled terms:
Attribute reduction - Attribute-Value-Tree - Large data Rough set - Value reduction
Classification code:
723 Computer Software, Data Handling and Applications - 723.1
Computer Programming - 821.0 Woodlands and Forestry - 921 Mathematics - 921.4
Combinatorial Mathematics, Includes Graph Theory, Set Theory
DOI:
10.1109/FSKD.2012.6233931
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
31.
Accession number:
20130515975636
Title:
Simulation of of 3D flood waves by gas-liquid two-phase model
Authors:
Wei, W.L.1 ; Zhao, X.J.1 ; Liu, Y.L.1/魏文礼;赵小军;刘玉玲
Author affiliation:
1
Institute of Hydraulic Engineering, Xi'an University of Technology, Xi'an, China
Corresponding author:
Wei, W. L. (wei_wenli@126.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
256-259
Issue:
PART 1
Monograph title:
Advances in Civil Engineering II
Issue date:
2013
Publication year:
2013
Pages:
2621-2624
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855652
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Civil Engineering and Transportation,
ICCET 2012
Conference date:
October 27, 2012 - October 28, 2012
Conference location:
Guilin, China
Conference code:
95112
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
This paper is concerned with a gas-liquid two-phase model combining with the k-Ε
turbulent model for numerical simulation of 3D flood waves due to complete or partial
dam-break. The flow equations are solved with the finite volume method and solved by the
pressure-correction algorithm of the SIMPLE-type. The free fluid surface is simulated by the the
volume of fluid(VOF) method. The comparisons with other numerical results show that the
proposed method is accurate, reliable and effective in simulation of dam-break flood waves. ©
(2013) Trans Tech Publications, Switzerland.
Number of references:
6
Main heading:
Three dimensional computer graphics
Controlled terms:
Civil engineering - Computer simulation - Finite volume method
- Floods - Liquids - Numerical methods - Three dimensional - Turbulence
Uncontrolled terms:
Dam-breaks - Flood waves - Flow equations - Free fluids
- Gas liquids - Numerical results - Turbulent models - Two-phase model - VOF
model - Volume of fluid method
Classification code:
409 Civil Engineering, General - 443.1 Atmospheric Properties 723.5 Computer Applications - 914.1 Accidents and Accident Prevention - 921.6
Numerical Methods - 931.2 Physical Properties of Gases, Liquids and Solids
DOI:
10.4028/www.scientific.net/AMM.256-259.2621
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
32.
Accession number:
20130515975632
Title:
3D simulation of flow in an aeration tank with two pipelines by a two-fluid model
Authors:
Wei, W.L.1 ; Zhao, X.J.1 ; Liu, Y.L.1/魏文礼;赵小军;刘玉玲
Author affiliation:
1
Institute of Hydraulic Engineering, Xi'an University of Technology, Xi'an, China
Corresponding author:
Wei, W. L. (wei_wenli@126.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
256-259
Issue:
PART 1
Monograph title:
Advances in Civil Engineering II
Issue date:
2013
Publication year:
2013
Pages:
2602-2605
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855652
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Civil Engineering and Transportation,
ICCET 2012
Conference date:
October 27, 2012 - October 28, 2012
Conference location:
Guilin, China
Conference code:
95112
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
In this paper, a numerical two-fluid flow model combining with the Realizable k-Ε
turbulent model for compressible viscous fluid is presented for the computation of flow
characteristics in an aeration tank; and the equations are solved with the finite volume method.
A multigrid technique based on the full approximation storage (FAS) scheme is employed to
accelerate the numerical convergence. The numerical results for velocity and turbulent kinetic
energy distribution in the aeration tank are obtained. It is shown that the Computational Fluid
Dynamics (CFD) is a valuable tool to analyze the interaction of flow field and aeration. © (2013)
Trans Tech Publications, Switzerland.
Number of references:
13
Main heading:
Computational fluid dynamics
Controlled terms:
Civil engineering - Finite volume method - Hydrodynamics Kinetics - Numerical methods - Sewage lagoons - Sewage tanks - Three
dimensional computer graphics
Uncontrolled terms:
3D simulations - Aeration tanks - CFD simulations -
Compressible viscous fluids - Flow characteristic - Full approximation storages Multigrid technique - Numerical convergence - Numerical results - Oxidation ditch
- Turbulent kinetic energy distribution - Turbulent models - Two fluid model Two-fluid flow
Classification code:
409 Civil Engineering, General - 452.2 Sewage Treatment - 631.2
Hydrodynamics - 723.5 Computer Applications - 921.6 Numerical Methods - 931
Classical Physics; Quantum Theory; Relativity
DOI:
10.4028/www.scientific.net/AMM.256-259.2602
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
33.
Accession number:
20130415927649
Title:
Numerical simulation of the gas-solid flow behavior in A spouted bed
Authors:
Wei, Wei1 ; Fan, Jinhe2, 3 ; Fan, Haihong2, 3 ; Xu, Delong2, 3/魏嵬;
Author affiliation:
1
School of Computer Science and Engineering, Xi'an University of technology, Xi'an 710048,
China
2
Institute of Powder Engineering, College of Materials and Mineral Resources, Xi'an Univ. of
Arch. and Tech, Xi'an 710055, China
3
State Key Laboratory of Architecture Science and Technology in West (XAUAT), Xi'an 710055,
China
Corresponding author:
Wei, W. (weiwei@xaut.edu.cn)
Source title:
International Journal of Digital Content Technology and its Applications
Abbreviated source title:
Int. J. Digit. Content Technol. Appl.
Volume:
7
Issue:
1
Issue date:
January 15, 2013
Publication year:
2013
Pages:
719-728
Language:
English
ISSN:
19759339
E-ISSN:
22339310
Document type:
Journal article (JA)
Publisher:
Advanced Institute of Convergence Information Technology, Myoungbo Bldg
3F,, Bumin-dong 1-ga, Seo-gu, Busan, 602-816, Korea, Republic of
Abstract:
The paper presents a computational study of the gas-solid flow in a
three-dimensional spouted bed by a combined approach of discrete element method and
computational fluid dynamics (DEM-CFD), in which the motion of individual particles was
obtained by solving Newton's second law of motion and gas flow by the Navier-Stokes equation
based on the concept of local average. The coupling between the discrete particle and continuum
gas was achieved by applying the principle of Newton's third law of motion. It was shown that
the motion of particles was forming a distinct circulation between center zone and boundary
zone of the 3D spouted bed in macro, and there was a stagnant zone near the bottom of the bed
in which the particle velocity is almost zero near the wall, they do not move anywhere. The
region was 7% approximately of initial steady bed.
Number of references:
22
Main heading:
Finite difference method
Controlled terms:
Computational fluid dynamics - Computer simulation - Flow of
solids - Navier Stokes equations
Uncontrolled terms:
Boundary zones - Computational studies - Gas-solid flows
- Local average - Motion of individual - Motion of particles - Newton's second law
- Newton's third law of motion - Particle velocities - Spouted bed
- Stagnant zones
Classification code:
723.5 Computer Applications - 921.6 Numerical Methods - 931.1
Mechanics
DOI:
10.4156/jdcta.vol7.issue1.82
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
34.
Accession number:
20130515973633
Title:
Fuzzy control strategy of powershift transmission of tractor
Authors:
Xi, Zhiqiang1, 2 ; Zhou, Zhili2 ; Li, Yan1/;;李言
Author affiliation:
1
Xi'an University of Technology, Xi'an, 710048, China
2
Henan University of Science and Technology, Luoyang, 471003, China
Corresponding author:
Xi, Z. (sseekk@126.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
241-244
Monograph title:
Industrial Instrumentation and Control Systems
Issue date:
2013
Publication year:
2013
Pages:
1959-1963
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855461
Document type:
Conference article (CA)
Conference name:
2012 International Conference on Measurement, Instrumentation and
Automation, ICMIA 2012
Conference date:
September 15, 2012 - September 16, 2012
Conference location:
Guangzhou, China
Conference code:
95105
Sponsor:
Queensland University of Technology; Korea Maritime University; Hong Kong
Industrial Technology Research Centre; Inha University, Korea
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
Due to the complex working conditions of tractor and its frequent load fluctuation,
it is difficult to analyze shift schedule through the traditional approach of building the
mathematical model of power train. The paper will applied fuzzy control theory to the shift
schedule. The control rules is determined based on the different operating states of tractor. Slip
rate which is a important indicator to reflect tractor operation will be introduced as control
parameters to research the control strategy of tractor's powershift antomatic transmisson. The
simulation result shows that the method can effectively avoid shift circulation and reduce the
shift frequency, which improve the dynamic performance and fuel economy of tractors. © (2013)
Trans Tech Publications, Switzerland.
Number of references:
7
Main heading:
Tractors (truck)
Controlled terms:
Fuel economy - Fuzzy control - Materials handling equipment Mathematical models - Tractors (agricultural)
Uncontrolled terms:
Control parameters - Control rules - Control strategies Dynamic performance - Fuzzy control strategy - Load fluctuations - Operating state Powershift transmissions - Shift schedule - Slip rates
Classification code:
521 Fuel Combustion and Flame Research - 663.1 Heavy Duty Motor
Vehicles - 691.1 Materials Handling Equipment - 921 Mathematics
DOI:
10.4028/www.scientific.net/AMM.241-244.1959
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
35.
Accession number:
20130415941888
Title:
Study on optical dot gain model based on point spread and probability methods
Authors:
Xu, Jun Fei1 ; Xu, Jinlin1 ; Xu, Yongchi2/;;
Author affiliation:
1
Research Center of Printing Technology, Zhejiang Industry and Trade Vocational College, 17
Fudong Road, Wenzhou 325003, China
2
School of Printing and Packing Engineering, Xi'an University of Technology, 5 South Jinhua
Road, Xi'an 710048, China
Corresponding author:
Xu, J. F. (feijunxu@126.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
271
Issue:
PART 1
Monograph title:
Frontiers of Manufacturing and Design Science III
Issue date:
2013
Publication year:
2013
Pages:
1434-1440
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855782
Document type:
Conference article (CA)
Conference name:
3rd International Conference on Frontiers of Manufacturing and Design
Science, ICFMD 2012
Conference date:
December 11, 2012 - December 13, 2012
Conference location:
Hong kong
Conference code:
95055
Sponsor:
Control Eng. Inf. Sci. Res. Assoc.; International Frontiers of science; and technology
Research Association; National Chin-Yi University of Technology; Integrated Research Center for
Green Living Techniques; Trans Tech Publication
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
Optical dot gain is the key point of halftone reconstruction study, and has always
been a meaningful topic of theoretical study. The Yule-Nielsen formula is by far the most widely
used research method of optical dot gain. However, solving the Yule-Nielsen parameter n remains
a difficult problem. This paper disregards solving for the Yule-Nielsen parameter n, analyzes the
light scattering and osmotic effect of halftone presswork, deduces the exact expressions of blank
area of presswork, and determines the reflectivity of the dot part and halftone presswork
according to the point spread function and probability method. Furthermore, this paper analyzes
how the optical dot gain depends on the dot area coverage of presswork, ink layer transmittivity,
and paper-based spectral reflectivity. In addition, a new algorithm model for optical dot gain is
established. By employing the Clapper-Yule Model to calculate the spectral transmittance of
printing ink and comparing it with the practical measured spectral reflectivity of the halftone
presswork proof, the accuracy of the model established in this paper is fully verified. © (2013)
Trans Tech Publications, Switzerland.
Number of references:
13
Main heading:
Probability
Controlled terms:
Design - Manufacture - Optical transfer function - Reflection
Uncontrolled terms:
Algorithm model - Clapper-Yule model - Keypoints Murray-davis method - Optical dot gain - Probability methods - Probability models research methods - Spectral reflectivity - Spectral transmittance
- Theoretical study
- Transmittivity
Classification code:
408 Structural Design - 537.1 Heat Treatment Processes - 741.1
Light/Optics - 922.1 Probability Theory
DOI:
10.4028/www.scientific.net/AMM.271-272.1434
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
36.
Accession number:
20130515974226
Title:
Preparation of Pb(Zr0.52Ti0.48)O3-Ni0.5Zn0.5Fe2O4 bilayer thin films and their
magnetic and ferroelectric properties
Authors:
Yan, Fuxue1 ; Zhao, Gaoyang1 ; Song, Na1 ; Chen, Yuanqing1/严富学;赵高扬;宋娜;
陈源清
Author affiliation:
1
School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048,
China
Corresponding author:
Yan, F. (yanfuxue@126.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
248
Monograph title:
Mechanical Materials and Manufacturing Engineering II
Issue date:
2013
Publication year:
2013
Pages:
212-217
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855560
Document type:
Conference article (CA)
Conference name:
2012 International Conference on Mechanical Materials and
Manufacturing Engineering, ICMMME 2012
Conference date:
October 5, 2012 - October 6, 2012
Conference location:
Dalian, China
Conference code:
95108
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
Ni0.5Zn0.5Fe2O4-Pb(Zr0.52Ti0.48)O3 (NZFO-PZT) composite films were prepared
using sol-gel method on Si (100) substrate with different bilayer structures, namely, the
NZFO/PZT (NP) and the PZT/NZFO (PN). Their structure, magnetic and ferroelectric properties
were characterized by X-ray diffractometer (XRD), vibration sample magnetometer (VSM) and
ferroelectric testing unit. Both the NP and the PN films exhibit coexistence of magnetic and
ferroelectric properties. The overlapping sequence has much influence on the electrical
properties. Whereas, such an overlapping structure of the films has slightly effect on its magnetic
properties. The NP structured composite film is more suitable to get a promising magnetoelectric
coupling. © (2013) Trans Tech Publications, Switzerland.
Number of references:
17
Main heading:
Ferroelectric films
Controlled terms:
Composite films - Electric properties - Ferroelectric materials Ferroelectricity - Film preparation - Industrial engineering - Lead - Magnetic
properties - Sol-gel process - Zinc
- Zirconium
Uncontrolled terms:
Bi-layer structure - Bilayer thin films - Ferroelectric property
- Magnetic - Magnetoelectric couplings - Multiferroic film - PZT - Si (100)
substrate - Vibration sample magnetometers - X ray diffractometers
Classification code:
813.1 Coating Techniques - 714.2 Semiconductor Devices and
Integrated Circuits - 712.1 Semiconducting Materials - 708.1 Dielectric Materials 912.1 Industrial Engineering - 701.2 Magnetism: Basic Concepts and Phenomena - 549.3
Nonferrous Metals and Alloys excluding Alkali and Alkaline Earth Metals - 546.3 Zinc and
Alloys - 546.1 Lead and Alloys - 701.1 Electricity: Basic Concepts and Phenomena
DOI:
10.4028/www.scientific.net/AMM.248.212
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
37.
Accession number:
20130415932584
Title:
XML keyword search algorithm based on level-traverse encoding
Authors:
Yao, Quanzhu1 ; Tian, Bing1 ; He, Wangyun2/姚全珠;;何望云
Author affiliation:
1
School of Computer Science and Engineering, Xi'an University of Technology, Xi'an, China
2
School of Civil Engineering and Architecture, Xi'an University of Technology, Xi'an, China
Corresponding author:
Yao, Q. (qzyao@xaut.edu.cn)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
263-266
Issue:
PART 1
Monograph title:
Information Technology Applications in Industry
Issue date:
2013
Publication year:
2013
Pages:
1553-1558
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855744
Document type:
Conference article (CA)
Conference name:
2012 International Conference on Information Technology and
Management Innovation, ICITMI 2012
Conference date:
November 10, 2012 - November 11, 2012
Conference location:
Guangzhou, China
Conference code:
95052
Sponsor:
Information Science School of Guangdong; University of Business Studies
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
For XML documents, existing keyword retrieval methods encode each node with
Dewey encoding, comparing Dewey encodings part by part is necessary in LCA computation.
When the depth of XML is large, lots of LCA computations will affect the performance of keyword
search. In this paper we propose a novel labeling method called Level-TRaverse (LTR) encoding,
combine with the definition of the result set based on Exclusive Lowest Common Ancestor
(ELCA),design a query Bottom-Up Level Algorithm(BULA).The experiments demonstrate this
method improves the efficiency and the veracity of XML keyword retrieval. © (2013) Trans Tech
Publications, Switzerland.
Number of references:
7
Main heading:
XML
Controlled terms:
Algorithms - Encoding (symbols) - Information technology Life cycle - Search engines
Uncontrolled terms:
BULA - ELCA - Encodings - Keyword retrieval Keyword search - Labeling methods - Level algorithms - Lowest common ancestors
Classification code:
723 Computer Software, Data Handling and Applications - 723.2
Data Processing and Image Processing - 903 Information Science - 913.1 Production
Engineering
DOI:
10.4028/www.scientific.net/AMM.263-266.1553
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
38.
Accession number:
20130415931610
Title:
Effects of welding heat input on properties of joints of X100 pipeline steel
Authors:
Zhang, Min1 ; Yang, Liang1 ; Li, Jihong1/张敏;杨亮;李继红
Author affiliation:
1
College of Material Science and Engineering, Xi'an University of Technology, Xi'an 710048,
China
Corresponding author:
Zhang, M. (zhmmn@xaut.edu.cn)
Source title:
Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research
Abbreviated source title:
Cailiao Yanjiu Xuebao
Volume:
26
Issue:
6
Issue date:
December 2012
Publication year:
2012
Pages:
567-571
Language:
Chinese
ISSN:
10053093
CODEN:
CYXUEV
Document type:
Journal article (JA)
Publisher:
Chinese Journal of Materials Research, 72 Wenhua Road, Shenyang, 110015,
China
Abstract:
The effect of welding heat input on the microstructure and properties of X100
pipeline steel was studied. The results show that with the increase of heat input, the strength
and toughness of X100 pipeline steel decrease due to the decrease of acicular ferrite in the weld
zone and the coarser grains in HAZ. The smaller heat input can reduce the width, and increase
the hardness in HAZ. The impact energy and the shear area of joints decrease with increasing
heat input. The impact fracture is quasi-cleavage fracture. The microstructure of weld zone is
mainly made up of acicular ferrite and granular bainitic which could bring excellent strength and
toughness. The microstructure of HAZ has larger changes because of difference of the cooling
rate under different welding heat input. © Copyright.
Number of references:
9
Main heading:
Welding
Controlled terms:
Brittle fracture - Ferrite - Heat affected zone - Microstructure
- Steel pipe
Uncontrolled terms:
Acicular ferrite - Coarser grains - Cooling rates - Heat
input - Impact energy - Impact fracture - Metallic material - Microstructure and
properties - Properties - Quasi cleavage fracture
- Shear area - Strength and
toughness - Weld zone - Welding heat input - X100 pipelines
Classification code:
421 Strength of Building Materials; Mechanical Properties - 538.2
Welding - 545.3 Steel - 933 Solid State Physics - 951 Materials Science
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
39.
Accession number:
20130515976046
Title:
Study on the technical conditions of old newspaper(ONP)/
recycled-polypropylene(rPP) composites
Authors:
Zhang, Xiaolin1 ; Bo, Xiangfeng2/张晓林;
Author affiliation:
1
School of Printing and Packaging Engineering, Xi'an University of Technology, China
2
School of Mechanical and Electrical Engineering, Xi'an University of Architecture and
Technology, China
Corresponding author:
Zhang, X. (zhangxiaolin@xaut.edu.cn)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
262
Monograph title:
Advances in Printing and Packaging Technologies
Issue date:
2013
Publication year:
2013
Pages:
418-421
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855720
Document type:
Conference article (CA)
Conference name:
2nd China Academic Conference on Printing and Packaging, CACPP 2012
Conference date:
October 19, 2012 - October 20, 2012
Conference location:
Beijing, China
Conference code:
95114
Sponsor:
China Academy of Printing Technology; Beijing Institute of Graphic Communication;
Green Packing Branch of CSES; School of Printing and Packaging; Xi'an University of Technology;
Et al.
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
Use of resource-rich wastepaper/recycled plastics as raw materials in the
production of wood-plastic composites(WPC) can alleviate the shortage of wood resources,
reduce pollution and has a attractive prospect. In this paper, old newspaper fiber
(ONPF)/recycled-polypropylene (rPP) Wood-Plastics Composite (WPC) was prepared by means of
mixing processing and compression molding. The effects of technical conditions on the
mechanical properties of WPC were investigated. The structure of composite was characterized
by means of FTIR and SEM. The results show that, Wastepaper and waste-PP can be used as raw
materials for preparation of WPC. The suitable preparation process for wastepaper/rPP
composites was: wastepaper fiber 20%, blending temperature 175°C, blending time 15min,
molding pressure 12MPa, molding temperature 175°C and molding time 10min. In these
conditions, tensile strength and flexural strength of wastepaper/rPP composites are 23.6MPa and
28.8MPa respectively, increased by 20.9% and 12.6% compared to those of rPP matrix. The
elongation at break of WPC is 10.6%, and the flexural modulus is 1328.9MPa, increased by 7.7%
compared to those of rPP matrix. The structure analysis found that there is no chemical reaction
between the fibers and the matrix. The research results have important practical significance in
the field of printing and packaging waste recycling and utilization, environmental protection and
energy saving. © (2013) Trans Tech Publications, Switzerland.
Number of references:
7
Main heading:
Polypropylenes
Controlled terms:
Blending - Compression molding - Elastomers - Mechanical
properties - Printing - Recycling - Thermoplastics - Waste paper - Wood
products
Uncontrolled terms:
Blending temperature - Elongation at break - Flexural
modulus - FTIR - Molding pressure - Molding temperature - Molding time - Old
newspapers - Packaging waste - Preparation process
- Recycled-plastic - Research
results - Resource-Rich - Structure analysis - Structure of composites - Technical
conditions - Wastepaper fibers - Wood plastic composite - Wood resources Wood-plastic composites
- Wood-plastics composite
Classification code:
818.2 Elastomers - 816.1 Processing of Plastics and Other Polymers
- 815.1.1 Organic Polymers - 951 Materials Science - 811.2 Wood and Wood Products 745.1 Printing - 452.3 Industrial Wastes - 802.3 Chemical Operations
DOI:
10.4028/www.scientific.net/AMM.262.418
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
40.
Accession number:
20130515975974
Title:
Research on reconstruction of spectral reflectance based on principal component
analysis
Authors:
Zhang, Yana1 ; Zhou, Shisheng1/张亚娜;周世生
Author affiliation:
1
Institute of Printing and Packaging Engineering, Xi'an University of Technology, China
Corresponding author:
Zhang, Y. (zhangyan1992@xaut.edu.cn)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
262
Monograph title:
Advances in Printing and Packaging Technologies
Issue date:
2013
Publication year:
2013
Pages:
53-58
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855720
Document type:
Conference article (CA)
Conference name:
2nd China Academic Conference on Printing and Packaging, CACPP 2012
Conference date:
October 19, 2012 - October 20, 2012
Conference location:
Beijing, China
Conference code:
95114
Sponsor:
China Academy of Printing Technology; Beijing Institute of Graphic Communication;
Green Packing Branch of CSES; School of Printing and Packaging; Xi'an University of Technology;
Et al.
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
Traditional color reproduction technology based on the Metamerism principle, the
disadvantage is that different observer condition leads to different color appearance.To fulfill the
color consistency, the spectrum reflectance of the object color sample need to be reconstructed.
The principal component analysis makes use of the linear combination of a few principal
components to reconstruct the spectral reflectance of sample. This paper analyzes the 31*31
matrix of Munsell spectral data by the principle component analyze method and achieves the
principal component for spectrum reflectance. The numbers of principal components are
identified as six by discussing the variance contribution rate. Spectral reconstruction of four
Munsell testing samples makes use of first six principal components, which has met the accuracy
requirements. Research shows that the reconstruction of spectral accuracy decreased when
training samples and testing samples belong to the different database. © (2013) Trans Tech
Publications, Switzerland.
Number of references:
9
Main heading:
Principal component analysis
Controlled terms:
Color - Printing - Reflection
Uncontrolled terms:
Color consistency - Color reproduction - Contribution rate
- Data sets - Linear combinations - Object colors - Principal Components Principle component - Spectral accuracy - Spectral data - Spectral reconstruction Spectral reflectances - Spectrum reflectance - Testing samples - Training sample
Classification code:
741.1 Light/Optics - 745.1 Printing - 922.2 Mathematical
Statistics
DOI:
10.4028/www.scientific.net/AMM.262.53
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
41.
Accession number:
20130415941251
Title:
Microstructures and damping capacities of az91d-0.7%si alloy
Authors:
Zhang, Zhongming1 ; Huang, Zhenghua2 ; Ma, Ying1 ; Xu, Chunjie1/张忠明;;;徐春
杰
Author affiliation:
1
School of Materials Science and Engineering, Xi'an University of Technology, Xi'an, Shaanxi,
710048, China
2
Institute of Metal Working and Forming Technology, Guangzhou Research Institute of
Non-ferrous Metals, Guangzhou, Guangdong, 510650, China
Corresponding author:
Zhang, Z. (zmzhang@xaut.edu.cn)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
268
Issue:
PART 1
Monograph title:
Materials, Mechanical Engineering and Manufacture
Issue date:
2013
Publication year:
2013
Pages:
316-320
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855799
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Applied Mechanics, Materials and
Manufacturing, ICAMMM 2012
Conference date:
November 17, 2012 - November 18, 2012
Conference location:
Changsha, China
Conference code:
95054
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
Microstructure of as-cast AZ91D alloy doped with 0.7wt% silicon was investigated,
the damping capacity of the alloy was measured by cantilever beam technique, and the damping
mechanism was also analyzed. The results show that after addition 0.7%Si into AZ91D alloy, the
dendritic grains are refined, and Chinese script Mg2Si phase forms in the interdendritic areas.
The damping capacities of the alloy are improved by Si addition, and increase with increasing of
strain amplitude. The damping behavior of the alloy is mainly resulted from dislocation
movement, and can be explained by the theory of Granato and Lu¨cke. © (2013) Trans Tech
Publications, Switzerland.
Number of references:
14
Main heading:
Silicon alloys
Controlled terms:
Alloying - Cerium alloys - Cladding (coating) - Damping Manufacture - Microstructure - Silicon
Uncontrolled terms:
As-cast - AZ91D alloy - Chinese script - Damping
behaviors - Damping capacity - Damping mechanisms - Dendritic grains Dislocation movement - Interdendritic areas - Phase forms
- Si addition - Si alloys
- Strain amplitude
Classification code:
933 Solid State Physics - 931.1 Mechanics - 549.3 Nonferrous
Metals and Alloys excluding Alkali and Alkaline Earth Metals - 951 Materials Science 547.2 Rare Earth Metals - 535.1 Metal Rolling - 531.1 Metallurgy - 537.1 Heat
Treatment Processes
DOI:
10.4028/www.scientific.net/AMM.268-270.316
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
42.
Accession number:
20130515976035
Title:
A fault diagnosis method for the roller-marks in offset printing machine based on
texture recognition
Authors:
Zhuofei, Xu1 ; Haiyan, Zhang2 ; Linghui, Ren1/徐卓飞;张海燕;任玲辉
Author affiliation:
1
The Faculty of Mechanical and Precision Instrument Engineering, Xi'an University of
Technology, China
2
The Faculty of Printing and Packaging Engineering, Xi'an University of Technology, China
Corresponding author:
Zhuofei, X. (xzf_34216606@163.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
262
Monograph title:
Advances in Printing and Packaging Technologies
Issue date:
2013
Publication year:
2013
Pages:
361-366
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855720
Document type:
Conference article (CA)
Conference name:
2nd China Academic Conference on Printing and Packaging, CACPP 2012
Conference date:
October 19, 2012 - October 20, 2012
Conference location:
Beijing, China
Conference code:
95114
Sponsor:
China Academy of Printing Technology; Beijing Institute of Graphic Communication;
Green Packing Branch of CSES; School of Printing and Packaging; Xi'an University of Technology;
Et al.
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
Roller-mark is a common problem in offset printing and its solution method is
important for printing. A new detecting method of texture analysis was given in this paper. In this
study, printing image was acquired with high-speed CCD. Compared the difference between
printing image and standard image, a defective image was obtained. Then the reason of
roller-marks was given by the texture recognition of defect image. Finally, experiments were
taken to prove the feasibility and effectiveness of this new method for the roller-marks diagnosis
in the offset printing machine. © (2013) Trans Tech Publications, Switzerland.
Number of references:
6
Main heading:
Rollers (machine components)
Controlled terms:
Failure analysis - Image processing - Printing presses Textures
Uncontrolled terms:
Defect images - Detecting methods - Fault diagnosis method
- High-speed CCD - Offset printing machines - Printing images - Roller-marks Solution methods - Standard images - Texture analysis
- Texture recognition
Classification code:
421 Strength of Building Materials; Mechanical Properties - 601.2
Machine Components - 741 Light, Optics and Optical Devices
Equipment - 921 Mathematics - 933 Solid State Physics
DOI:
10.4028/www.scientific.net/AMM.262.361
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
-
745.1.1 Printing
20130215 新增 18 条
1.
Accession number:
20130615999705
Title:
Effect of additives on microstructure and properties of novel AgTiB2 composite
Authors:
Chen, Mei1 ; Wang, Xianhui1 ; Zou, Juntao1 ; Liang, Shuhua1/陈梅;王献辉;邹军涛;
梁淑华
Author affiliation:
1
Xi'an University of Technology, Xi'an 710048, China
Corresponding author:
Chen, M. (chenmeixaut@163.com)
Source title:
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering
Abbreviated source title:
Xiyou Jinshu Cailiao Yu Gongcheng
Volume:
41
Issue:
12
Issue date:
December 2012
Publication year:
2012
Pages:
2228-2232
Language:
Chinese
ISSN:
1002185X
CODEN:
XJCGEA
Document type:
Journal article (JA)
Publisher:
Rare Metals Materials and Engineering Press, P.O. Box 51, Xi'an, 721014,
China
Abstract:
AgTiB2 contact material with different additives was prepared by high-energy
milling and powder metallurgy. The effects of WO3, Al, Bi2O3 addition and WO3+Bi2O3, WO3+Al
composite additions on the microstructure and properties of AgTiB2 were investigated. The
morphology of milled powders and the microstructure of AgTiB2 composite with different
additives were characterized by scanning electron microscope equipped with energy disperse
spectroscopy, and the hardness and electrical conductivity were tested. The results show that
WO3single addition and WO3+Al, WO3+Bi2O3 composite additions can improve the densification
of AgTiB2. In comparison with those of Ag/TiB2 composite without any additive, the hardness
and electrical conductivity of the AgTiB2 composite materials with WO3 single addition and
WO3+Al composite addition are increased, whose hardness values are 1253 and 1022 MPa
respectively, and the electrical conductivity are 78.62%IACS and 14.91%IACS, respectively. The
hardness and electrical conductivity of the AgTiB2 composite materials with Bi2O3+WO3
composite addition are 786 MPa and 16.12%IACS, respectively. © 2012, Northwest Institute for
Nonferrous Metal Research. Published by Elsevier BV. All rights reserved.
Number of references:
20
Main heading:
Additives
Controlled terms:
Aluminum - Composite materials - Electric conductivity Hardness - Microstructure - Powder metallurgy - Scanning electron microscopy
Uncontrolled terms:
Al composites - Contact material - Electrical conductivity Hardness values - Microstructure and properties - Milled powders - Scanning Electron
Microscope
Classification code:
951 Materials Science - 933 Solid State Physics - 811 Cellulose,
Paper and Wood Products - 804 Chemical Products Generally - 803 Chemical Agents and
Basic Industrial Chemicals - 741.1 Light/Optics - 701.1 Electricity: Basic Concepts and
Phenomena - 541.1 Aluminum - 536 Powder Metallurgy - 421 Strength of Building
Materials; Mechanical Properties - 415 Metals, Plastics, Wood and Other Structural Materials
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number:
20130615987920
Title:
Investigation on osteoblast growth on the modified surface of porous titanium
Authors:
Guangsheng, Xu1, 2 ; Hongchao, Kou1 ; Ruolin, Li1 ; Xianghong, Liu2 ; Tingli, Lu3 ;
Qi, Li4 ; Lian, Zhou1/;;;;;
Author affiliation:
1
State Key Laboratory of Solidification Processing, Northwest Polytechnical University, Xi'an
710072, China
2
National Engineering Laboratory for Superconducting Material, Western Superconducting
Technology Co., Ltd, Xi'an 710018, China
3
School of Life Science, Northwest Polytechnical University, Xi'an 710072, China
4
School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048,
China
Corresponding author:
Guangsheng, X. (xuguangshengss@163.com)
Source title:
Advanced Materials Research
Abbreviated source title:
Adv. Mater. Res.
Volume:
647
Monograph title:
Biomaterial and Bioengineering
Issue date:
2013
Publication year:
2013
Pages:
98-103
Language:
English
ISSN:
10226680
ISBN-13:
9783037855973
Document type:
Conference article (CA)
Conference name:
2012 International Conference on Biomaterial and Bioengineering, ICBB
2012
Conference date:
December 19, 2012 - December 20, 2012
Conference location:
Hong kong
Conference code:
95254
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
Three methods have been used to modify the porous titanium surface, which is
the alkali heat treatment, alkali heat treatment + SBF solution soak and alkali heat treatment +
precalcidied + SBF solution soak. The morphology of different surfaces was observed by scanning
electron microscopy (SEM). The MC3T3-E1 osteoblast cell was cultured on the modified and
unmodified surface of porous titanium with 3days and 7days, the morphology of osteoblast
adhesion and growth on different surface was observed. The results showed that osteoblast
adhere on the modified and unmodified surface of the porous titanium. Osteoblast on AHS and
HA modified surface can grow and spread, but it cannot grow and spread on unmodified and AH
modified surface of the porous titanium. Osteoblast can grow across the different titanium fibers
of on HA modified surface of porous titanium. Osteoblast on the HA surface has the very good
biological suitability, which is beneficial to the combination of bone tissue and porous titanium.
© (2013) Trans Tech Publications, Switzerland.
Number of references:
13
Main heading:
Titanium
Controlled terms:
Biomaterials - Heat treatment - Morphology - Osteoblasts Scanning electron microscopy - Surface treatment - Tissue
Uncontrolled terms:
Bone tissue - In-vitro - MC3T3-E1 - Modified surfaces Osteoblast adhesion - Osteoblast cells - Osteoblast growth - Porous titanium - SBF
solution - Suitability
Classification code:
931.2 Physical Properties of Gases, Liquids and Solids - 931 Classical
Physics; Quantum Theory; Relativity - 802 Chemical Apparatus and Plants; Unit Operations;
Unit Processes - 542.3 Titanium and Alloys - 951 Materials Science - 539 Metals
Corrosion and Protection; Metal Plating - 462.5 Biomaterials (including synthetics) - 461.9
Biology - 461.2 Biological Materials and Tissue Engineering - 537.1 Heat Treatment
Processes
DOI:
10.4028/www.scientific.net/AMR.647.98
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number:
20130515972981
Title:
Seismic behavior of four-angle-connection steel frame structure with steel plate
shear walls
Authors:
Guo, Hongchao1 ; Hao, Jiping2 ; Pan, Xiuzhen1 ; Liu, Jianjun3/郭宏超;郝际平;潘秀
珍;刘建军
Author affiliation:
1
Department of Civil Engineering and Architecture, Xi'an University of Technology, Xi'an
710048, China
2
Department of Civil Engineering, Xi'an University of Architecture and Technology, Xi'an
710055, China
3
China Railway Southwest Research Institute Co. Ltd., Chengdu 611731, China
Corresponding author:
Hao, J. (haojiping@xauat.edu.cn)
Source title:
Jianzhu Jiegou Xuebao/Journal of Building Structures
Abbreviated source title:
Jianzhu Jiegou Xuebao
Volume:
34
Issue:
1
Issue date:
January 2013
Publication year:
2013
Pages:
70-75
Language:
Chinese
ISSN:
10006869
CODEN:
JJXUD2
Document type:
Journal article (JA)
Publisher:
Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China
Abstract:
Based on the cyclic loading test, the finite element analysis on the hysteretic
behaviors of the semi-rigid composite steel frame with steel plate shear wall was conducted to
study the load carrying capacity, hysteretic behavior, stress and deformation development
process, energy dissipation mechanism and failure mode. The results of analysis and test indicate
that the requirement on the joint ductility is lowered by using infilled panels. The cooperative
work between the frame and the shear wall is well. It's an ideal lateral force resisting structural
system, which has excellent energy consumption and high safety margin. The finite element
simulation of structure stress and deformation development course agrees well with the
experimental phenomena. Due to the initial eccentricity, welding residual stress and other
reasons, the finite element analysis results of the peak load is close to the test results at elastic
stage. The finite element analysis of the peak load is higher than the test results, and the
theoretical hysteresis loop is plumper.
Number of references:
7
Main heading:
Structural frames
Controlled terms:
Curricula - Deformation - Energy dissipation - Energy
utilization - Finite element method - Hysteresis - Hysteresis loops - Numerical
analysis - Plates (structural components) - Shear walls
- Steel construction
Uncontrolled terms:
Composite steel - Cooperative works - Cyclic loading test Development process - Energy dissipation mechanism - Finite element simulations High safety - Hysteretic behavior - Hysteretic loop - Initial eccentricity
- Lateral
force - Peak load - Seismic behavior - Semi-rigid - Semirigid connections - Steel
frame structures - Steel plate shear walls - Stress and deformation - Structural systems
- Welding residual stress
Classification code:
961 Systems Science - 921.6 Numerical Methods - 921
Mathematics - 901.2 Education - 545.3 Steel - 525.4 Energy Losses (industrial and
residential) - 525.3 Energy Utilization - 422 Strength of Building Materials; Test Equipment
and Methods - 421 Strength of Building Materials; Mechanical Properties - 408.2
Structural Members and Shapes - 402 Buildings and Towers
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number:
20130615999747
Title:
Back analysis of displacements of Heihe clay core rockfill dam at different stages
Authors:
焕焕
He, Min1, 2 ; Li, Ning1 ; Zhang, Xi-Qian3 ; Gao, Huan-Huan2/何敏;李宁;张西前;高
Author affiliation:
1
Institute of Getechnical Engineering, Xi'an University of Technology, Xi'an 710048, China
2
Hydrochina Xibei Engineering Corporation, Xi'an 710065, China
3
Heihe Administration Bureau, Xi'an 710061, China
Corresponding author:
He, M. (hem@nwh.cn)
Source title:
Yantu Lixue/Rock and Soil Mechanics
Abbreviated source title:
Rock Soil Mech
Volume:
34
Issue:
1
Issue date:
January 2013
Publication year:
2013
Pages:
259-264
Language:
Chinese
ISSN:
10007598
Document type:
Journal article (JA)
Publisher:
Academia Sinica, Wuhan, 430071, China
Abstract:
The safety evaluation of high earth core rockfill dam through deformation and
seepage measurement and analysis is one of most important problem in nowdays soil mechanics
at present. Due to the influences of construction method, construction quality and management
during and after construction, the real parameters of the dam become quite different from the
original designing parameters. So it is of great significance to get real parameters and real
running state of the dam based on back analysis in order to evaluate the dam stability exactly and
comprehensively. To get the real mechanics parameters of the dam soils, the investigation on
stress, deformation and seepage behavior by the in-situ measurement in Heihe clay core rockfill
dam in Xi'an are executed based on analysis of the time property and space property. Then the
relationship between the deformation and load is built; and a back analysis method for the soil
parameters during construction and operation based on the theory of nearly saturated soils using
the 3-D finite element simulation is suggested, from which the DUCAN parameters, seepage
coefficients and wetting parameters of the core clay of the dam can be determined directly and
realistically. And the method proposed is useful for design and back analysis of these type
projects.
Number of references:
9
Main heading:
Dams
Controlled terms:
Deformation - Rock mechanics - Rocks - Seepage - Soil
mechanics - Soils - Wetting
Uncontrolled terms:
3D finite-element simulation - Back analysis - Back analysis
method - Back analysis of displacements - Clay cores - Construction method Construction quality - Dam stability - During construction - Earth core
- In-situ
measurement - Measurement and analysis - Nearly saturated soils - Observed data Rock-fill dam - Safety evaluations - Seepage coefficient - Soil parameters - Time
properties - Wetting parameters
Classification code:
483.1 Soils and Soil Mechanics - 481.1 Geology - 441.1 Dams 931.2 Physical Properties of Gases, Liquids and Solids - 441 Dams and Reservoirs; Hydro
Development - 421 Strength of Building Materials; Mechanical Properties - 407 Maritime
and Port Structures; Rivers and Other Waterways - 422 Strength of Building Materials; Test
Equipment and Methods
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number:
20130615997857
Title:
A grey-based service reputation model for web of things
Authors:
He, Xiu-Qing1, 2 ; Wang, Ying-Hui1/;王映辉
Author affiliation:
1
Faculty of Computer Science and Engineering, Xi'an University of Technology, Xi'an 710048,
China
2
School of Computer Science, ShaanXi Normal University, Xi'an, 710062, China
Corresponding author:
He, X.-Q. (xiuqing@snnu.edu.cn)
Source title:
Journal of Convergence Information Technology
Abbreviated source title:
J. Convergence Inf. Technol.
Volume:
8
Issue:
2
Issue date:
January 2013
Publication year:
2013
Pages:
685-694
Language:
English
ISSN:
19759320
E-ISSN:
22339299
Document type:
Journal article (JA)
Publisher:
Advanced Institute of Convergence Information Technology, Myoungbo Bldg
3F,, Bumin-dong 1-ga, Seo-gu, Busan, 602-816, Korea, Republic of
Abstract:
Service reputation is widely used to evaluate service behavior in Service-Oriented
Architecture (SOA) application that is based on service consumer ratings which are subjective
personal perception for service performance evaluation. As SOA technologies are reused in Web
of Things (WoT) to build service-oriented application for sharing information, cooperating work
and integrating WoT into the existing IT system, it is a crucial challenge that evaluate service
reputation in WoT without heavy interactive query process while devices in WoT are
resources-limited. This work focuses on the research of grey-based representation for service
reputation and rating to deal with the uncertainty in WoT, and the service reputation aggregation
model with the metrics of rater's rating, personal performance, quality similarity and temporal
sensitivity of ratings. The Empirical results show that proposed reputation model can reflect
service behavior effectively and efficiently even a certain percentage unfair ratings in the
reputation aggregation.
Number of references:
17
Main heading:
Consumer behavior
Controlled terms:
Information services - Rating - Search engines - Service
oriented architecture (SOA) - World Wide Web
Uncontrolled terms:
Aggregation model - Grey number - Interactive queries IT system - Personal perception - Personal performance - Reputation rating -
Service Oriented - Service performance evaluation - Service reputation
- Sharing
information - Temporal sensitivity - Unfair ratings - Web of things
Classification code:
722.4 Digital Computers and Systems - 723 Computer Software, Data
Handling and Applications - 902.2 Codes and Standards - 903.4 Information Services 931.3 Atomic and Molecular Physics
DOI:
10.4156/jcit.vol8.issue2.82
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number:
20130615996676
Title:
Study on speed performance of bearing based on self-lubricating C(Cr, N) coatings
steel ball
Authors:
Jia, Gui-Xi1 ; Chang, Jia-Dong1 ; Li, Yan2 ; Wang, Ya-Hong1/贾贵西;常家东;李言;王
雅红
Author affiliation:
1
Luoyang Institute of Science and Technology, Luoyang 471023, China
2
School of Mechanical and Instrumental Engineering, Xi'an University of Technology, Xi'an
710048, China
Corresponding author:
Jia, G.-X.
Source title:
Gongneng Cailiao/Journal of Functional Materials
Abbreviated source title:
Gongneng Cailiao
Volume:
43
Issue:
SUPPL. 2
Issue date:
November 2012
Publication year:
2012
Pages:
209-212
Language:
Chinese
ISSN:
10019731
CODEN:
GOCAEA
Document type:
Journal article (JA)
Publisher:
Journal of Functional Materials, P.O. Box 1512, Chongqing, 630700, China
Abstract:
The self-lubricating C(Cr, N) coatings was deposited on bearing steel ball surface by
means of an closed-field unbalanced magnetron sputtering ion plating technique. An 6204
bearing was used for the bearing experimental work. The microstructure and chemical
compositions of the coatings were observed and analysed by the scanning electron microscopy
(SEM) and transmission electron microscopy (TEM). Its adhesion, hardness, toughness and
friction behaviors was tested, and the speed performance and self-lubricating properties of
coated bearing and uncoated bearing were also tested by an high-performance bearing testing
machine, and also been comparatived analysis. The results show that the C(Cr, N) coatings
working-layer has better microstructure and comprehensively mechanical properties. And
compared to the uncoated bearing, the coatings significantly reduces the value of bearing
vibration, the coated bearing greatly improves high speed performance and self-lubricating
properties.
Number of references:
13
Main heading:
Chromate coatings
Controlled terms:
Ball bearings - Ion implantation - Lubrication - Magnetron
sputtering - Mechanical properties - Microstructure - Scanning electron microscopy
- Transmission electron microscopy
Uncontrolled terms:
Bearing steels - Chemical compositions - Closed-field
unbalanced magnetron sputtering - Friction behavior - High-speed performance - Ion
plating - Self-lubricating - Self-lubricating properties - Speed performance - Steel
balls
- Testing machine - Transmission electron microscopy tem
Classification code:
951 Materials Science - 933 Solid State Physics - 932.1 High
Energy Physics - 813.2 Coating Materials - 741.3 Optical Devices and Systems - 741.1
Light/Optics - 715.1 Electronic Equipment, non-communication - 607.2 Lubrication 601.2 Machine Components
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number:
20130615999677
Title:
Nano-composite powder of tungsten coated copper produced by
thermo-chemistry co-reduction
Authors:
Li, Junqiang1 ; Chen, Wenge1 ; Tao, Wenjun1 ; Shao, Fei1 ; Ding, Bingjun2/李君强;
陈文革;陶文俊;邵菲;丁秉均
Author affiliation:
1
Xi'an University of Technology, Xi'an 710048, China
2
Xi'an Jiaotong University, Xi'an 710049, China
Corresponding author:
Li, J. (403627986@qq.com)
Source title:
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering
Abbreviated source title:
Xiyou Jinshu Cailiao Yu Gongcheng
Volume:
41
Issue:
12
Issue date:
December 2012
Publication year:
2012
Pages:
2091-2094
Language:
English
ISSN:
1002185X
CODEN:
XJCGEA
Document type:
Journal article (JA)
Publisher:
Rare Metals Materials and Engineering Press, P.O. Box 51, Xi'an, 721014,
China
Abstract:
Two kinds of copper oxide with different particle sizes and 1.5 μm tungsten
trioxide powder were employed to prepare the high-purity CuWO4 powder. By two stage
hydrogen-reduction of the CuWO4 at 360 and 750 °C respectively and continuously,
nano-composite powder of tungsten coated copper was synthesized. Micro-morphology,
crystallization-components and grain-size of the products were investigated by scanning electron
microscope (SEM), X-ray diffract meter (XRD) and transmission electric microscope (TEM) and
laser particle size analyzer (LPSA) was also applied to measure the particle-size of CuWO4. The W
film thickness of nano-composite powder synthesized by smaller-sized CuWO4 is thinner than
that made from bigger-sized CuWO4. The average particle size of nano-composite powder of
tungsten coated copper is about 50 nm under the two-stage hydrogen reduction. © 2012,
Northwest Institute for Nonferrous Metal Research. Published by Elsevier BV. All rights reserved.
Number of references:
12
Main heading:
Nanocomposite films
Controlled terms:
Copper - Hydrogen - Nanocomposites - Particle size Particle size analysis - Reduction - Scanning electron microscopy - Tungsten Tungsten compounds
Uncontrolled terms:
Average particle size - Co-reduction - Coated powders High-purity - Hydrogen reduction - Laser particle size analyzer - Nano Nano-composite powders - Tungsten trioxide - W-Cu
- XRD
Classification code:
943.2 Mechanical Variables Measurements - 933 Solid State Physics
- 804 Chemical Products Generally - 802.2 Chemical Reactions - 951 Materials Science
- 761 Nanotechnology - 712.1 Semiconducting Materials - 544.1 Copper - 543.5
Tungsten and Alloys - 741.1 Light/Optics
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number:
20130616000247
Title:
Water resources allocation based on the grey theory and the improved
electromagnetism-like algorithm
Authors:
Li, Wei-Qian1 ; Xie, Jian-Cang1 ; Li, Jian-Xun1 ; Yang, Ming-Xiang2, 3/李维乾;解建
仓;李建勋;杨明祥
Author affiliation:
1
Xi'an University of Technology, Xi'an 710048, China
2
Tsinghua University, Beijing 100084, China
3
China Institute of Water Resource and Hydropower Research, Beijing 100038, China
Corresponding author:
Li, W.-Q. (wqli@foxmail.com)
Source title:
Shuili Xuebao/Journal of Hydraulic Engineering
Abbreviated source title:
Shuili Xuebao
Volume:
43
Issue:
12
Issue date:
December 2012
Publication year:
2012
Pages:
1447-1456
Language:
Chinese
ISSN:
05599350
CODEN:
SLHPBI
Document type:
Journal article (JA)
Publisher:
China Water Power Press, no. 1 Xikang Road, Nanjing, 210024, China
Abstract:
Combined with the three principles of efficiency, fairness and sustainability in the
process of water resources allocation, the multi-object water resources allocation model based
on the interval grey numbers is built in view of the uncertainty of the water resources, society,
economy, environment and other index factors. On the basis of using interval grey numbers
prediction method calculating the data of the index of the planning years, this model makes the
maximum economic benefit, minimum wastewater and water shortage as the effectiveness goal,
the minimum Gini coefficient distributed equally in the branch areas of the water resources as
the fairness goal, and a distance coordination model to evaluate the sustainability goal of water
resources allocation. It turns the uncertain multi-objective problem into a certain single objective
one, and calculates by using the improved algorithm of electromagnetism. Finally, the model is
applied to certain northwest area. The result shows that the structure of the model is reasonable
and the method is simple and effective.
Number of references:
23
Main heading:
Water resources
Controlled terms:
Algorithms - Electromagnetism - Resource allocation Sustainable development - Water supply
Uncontrolled terms:
Coordination degree - Coordination model - Economic
benefits - Electromagnetism-like algorithm - Gini coefficients - Grey theory Interval grey number - Multi-objective problem - Multiobject - Prediction methods
- Resources allocation - Single objective - Water shortages
Classification code:
921 Mathematics - 912.3 Operations Research - 911.2 Industrial
Economics - 723 Computer Software, Data Handling and Applications - 701 Electricity and
Magnetism - 446.1 Water Supply Systems - 444 Water Resources
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number:
20130616000750
Title:
Cause analysis of plate pitting corrosion in lubricating oil cooler of main equipment
in datang weihe thermal power plant
Authors:
Li, Zhouping1 ; Hu, Xiaojian1 ; Ma, Haiyan2 ; Yan, Siwei2 ; Yan, Aijun2, 3 ; Feng,
Lajun3/;;;;闫爱军;冯拉俊
Author affiliation:
1
Datang Weihe Thermal Power Plant, Xianyang, Shaanxi,712038, China
2
Shaanxi Electric Power Research Institute, Xi'an 710054, China
3
Xi'an University of Technology, Shaanxi Provincial Key Laboratory for Corrosion and
Protection, Xi'an,710048, China
Corresponding author:
Li, Z. (396655562@qq.com)
Source title:
Advanced Materials Research
Abbreviated source title:
Adv. Mater. Res.
Volume:
634-638
Issue:
1
Monograph title:
Advances in Chemical, Material and Metallurgical Engineering
Issue date:
2013
Publication year:
2013
Pages:
1677-1681
Language:
English
ISSN:
10226680
ISBN-13:
9783037855898
Document type:
Conference article (CA)
Conference name:
2012 2nd International Conference on Chemical, Material and
Metallurgical Engineering, ICCMME 2012
Conference date:
December 15, 2012 - December 16, 2012
Conference location:
Kunming, China
Conference code:
95231
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
The plate heat exchanger in oil cooler of unit 2 in a thermal power plant became
corrosion perforation after 2-year running, and severe pits were found on its surface. The
material and scale composition of the lubricating oil cooler was analyzed, and it was found that
the oil cooler was made of 304 stainless steel, instead of the 316 stainless steel provided by
factory. The corrosion products on the corroded surface were composed of some characteristic
elements in cooling water. The analysis suggested that the reason for corrosion perforation of the
heat exchanger could be associated with its material composition, and the under scale corrosion
formed under the action of scale deposition could also cause corrosion perforation and
large-scale pits. © (2013) Trans Tech Publications, Switzerland.
Number of references:
8
Main heading:
Cooling systems
Controlled terms:
Energy dispersive spectroscopy - Heat exchangers - Lubricating
oils - Metallurgical engineering - Pitting - Scanning electron microscopy - Stainless
steel - Thermoelectric power plants
Uncontrolled terms:
304 stainless steel - 316 stainless steel - Corroded surface
- Corrosion products - Material compositions - Oil cooler - Plate heat exchangers Scale composition - Scale deposition - Thermal power plants
Classification code:
741.1 Light/Optics - 616.1 Heat Exchange Equipment and
Components - 607.1 Lubricants - 801 Chemistry - 545.3 Steel - 531 Metallurgy and
Metallography - 402.1 Industrial and Agricultural Buildings - 539.1 Metals Corrosion
DOI:
10.4028/www.scientific.net/AMR.634-638.1677
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
10.
Accession number:
20130615996498
Title:
Technology research on wear-resistant coating of control valve in coal-chemical
industry
Authors:
Liu, Haibo1, 2 ; Wu, Qiaomei2 ; Fu, Weiping1 ; Ma, Yushan2 ; Gao, Qiang2/刘海波;
吴巧梅;傅卫平;马玉山;高强
Author affiliation:
1
Faculty of Mechanical and Precision Instrument Engineering, Xi'an University of Technology,
Xi'an 710048, China
2
Wuzhong Instrument Co. Ltd., Wuzhong 751100, China
Corresponding author:
Liu, H. (lhb@wzyb.com.cn)
Source title:
Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument
Abbreviated source title:
Yi Qi Yi Biao Xue Bao
Volume:
33
Issue:
12
Issue date:
December 2012
Publication year:
2012
Pages:
2825-2832
Language:
Chinese
ISSN:
02543087
CODEN:
YYXUDY
Document type:
Journal article (JA)
Publisher:
Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China
Abstract:
Aiming at the special conditions of the valves used in coal chemical industry, in
order to improve the wear resistance of the valve trim, three typical processing technologies are
adopted, which are high velocity oxy-fuel (HVOF), atmospheric plasma spray (APS) and plasma
transferred arc (PTA); and the typical materials that match the above processing technologies are
selected to spray the sample. Abrasion test, hardness test and micro-structure analysis reveal
that APS uses much higher spraying temperature than HVOF, which could contribute to the
carbide oxidation and dissolution in the matrix, after deposition the coating flexibility increases
and the worn surface is difficult to be cracked down and peeled off. In HVOF spraying process, the
particles have high impact speed and over-heating does not happen; and the coatings are under
compressive stress, have high density and good wear resistance characteristic. The coating of PTA
hardfacing has strong binding force with the base material, high hardness and good thickness, its
wear resistance characteristic is between those of APS and HVOF.
Number of references:
16
Main heading:
HVOF thermal spraying
Controlled terms:
Carbides - Chemical industry - Coal - Coatings - Hard
facing - Hardness - Pipe flow - Plasma spraying - Plasma welding - Safety valves
- Spraying - Wear resistance
Uncontrolled terms:
Abrasion tests - Atmospheric plasma spray - Base material
- Control valves - Hardness test - High density - High hardness - High impact High velocity oxy-fuel - Over-heating
- Plasma transferred arc - Processing
technologies - Resistance characteristics - Spraying process - Strong binding Technology research - Wear-resistant coating - Worn surface
Classification code:
932.3 Plasma Physics - 914.1 Accidents and Accident Prevention 813.1 Coating Techniques - 812.1 Ceramics - 951 Materials Science - 805 Chemical
Engineering, General - 539 Metals Corrosion and Protection; Metal Plating - 524 Solid
Fuels - 421 Strength of Building Materials; Mechanical Properties - 619.1 Pipe, Piping and
Pipelines
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
11.
Accession number:
20130615997444
Title:
Analysis of the thickness of the PDMS layer in structure of the stretchable sensors
Authors:
Lu, Yanjun1 ; Zhu, Hongbin1 ; Zhang, Yongfang2 ; Hei, Di1/吕延军;;张永芳;黑棣
Author affiliation:
1
School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology,
Xi'an 710048, China
2
School of Printing and Packaging Engineering, Xi'an University of Technology, Xi'an 710048,
China
Corresponding author:
Lu, Y. (lyj_xaut@hotmail.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
278-280
Monograph title:
Advances in Mechatronics and Control Engineering
Issue date:
2013
Publication year:
2013
Pages:
852-855
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855959
Document type:
Conference article (CA)
Conference name:
2012 International Conference on Mechatronics and Control Engineering,
ICMCE 2012
Conference date:
November 29, 2012 - November 30, 2012
Conference location:
Guangzhou, China
Conference code:
95258
Sponsor:
Queensland University of Technology, Australia; Korea Maritime University; Hong
Kong Industrial Technology Research Centre; Inha University, Korea
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
The prospective application of flexible electronics is feasible by shielding the
silicon ribbons from damage in the structure. The silicon failure in the design of strain isolation
for stretchable and flexible sensors is analyzed by FEM. The destruction of the silicon circuit is
different with the change of the thickness of the PDMS layer in stretchable sensors. Owing to the
fact that the PDMS layer is not infinitely thick in the application, the purpose of the paper is to
provide a reference for choosing the thickness of the PDMS layer in the design of stretchable
sensors. © (2013) Trans Tech Publications, Switzerland.
Number of references:
9
Main heading:
Sensors
Controlled terms:
Finite element method - Microchannels - Silicon
Uncontrolled terms:
Flexible sensor - Prospective applications - Silicon circuits Silicon ribbons - Strain isolation - Thickness of the PDMS layer
Classification code:
604 Metal Cutting and Machining - 631 Fluid Flow - 712.1.1
Single Element Semiconducting Materials - 801 Chemistry - 921.6 Numerical Methods
DOI:
10.4028/www.scientific.net/AMM.278-280.852
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
12.
Accession number:
20130515973180
Title:
Applications of information navigation method in wireless sensor networks
Authors:
Wei, Wei1 ; Zhang, Liang2 ; Guo, De-Ke3 ; Shen, Pei-Yi2/魏嵬;张亮;郭德科;沈沛意
Author affiliation:
1
School of Computer Science and Technology, Xi'an University of Technology, Xi'an 710048,
China
2
National School of Software, Xidian University, Xi'an 710071, China
3
School of Information System and Management, National University of Defense Technology,
Changsha 410073, China
Corresponding author:
Wei, W.
Source title:
Tongxin Xuebao/Journal on Communications
Abbreviated source title:
Tongxin Xuebao
Volume:
33
Issue:
SUPPL.2
Issue date:
November 2012
Publication year:
2012
Pages:
146-152
Language:
Chinese
ISSN:
1000436X
Document type:
Journal article (JA)
Publisher:
Editorial Board of Journal on Communications, No.1 Binhe Road, Hepingli,
Dongcheng District, Beijing, 1000013, China
Abstract:
For adapting to a novel architecture of WSNs, which supports information query
and navigation systems through construction of the virtual potential field. Under the premise of
diffusion equation and poisson-based formula, a novel method was proposed which can
accomplish the navigation more conveniently and more efficiently. In order to guarantee the
accuracy of navigation, the relative knowledge of information transmission and the partial
differential process (diffusion equation) in electric potential field was utilized, meanwhile
gradient descent method was also applied in the process of application. A complete
mathematical derivation was used. Tiny-OS simulations show the method can efficiently
overcome the original WSNs weakness that network configuration abilities of information
navigation are not good enough. Simultaneously, during the process of explore the navigation
computation, structures of diffusion equation are more flexible and adaptability.
Number of references:
25
Main heading:
Wireless sensor networks
Controlled terms:
Computer simulation - Electric potential - Information retrieval
- Navigation systems - Partial differential equations
Uncontrolled terms:
Diffusion equations - Electric potential fields - Gradient
Descent method - Information field - Information query - Information transmission Mathematical derivation - Navigation methods - Network configuration - Novel
architecture
- Partial differential - Potential field - Variation models
Classification code:
434.4 Waterway Navigation - 701.1 Electricity: Basic Concepts and
Phenomena - 723.5 Computer Applications - 732 Control Devices - 921.2 Calculus
DOI:
10.3969/j.issn.1000-436x.2012.z2.019
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
13.
Accession number:
20130615999688
Title:
Numerical analysis of the infiltration process of WCu pseudo-alloy
Authors:
Xiao, Peng1 ; Wang, Ni1 ; Yang, Xiaohong1/肖鹏;王妮;杨晓红
Author affiliation:
1
Xi'an University of Technology, Xi'an 710048, China
Corresponding author:
Xiao, P. (xiaopeng01@xaut.edu.cn)
Source title:
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering
Abbreviated source title:
Xiyou Jinshu Cailiao Yu Gongcheng
Volume:
41
Issue:
12
Issue date:
December 2012
Publication year:
2012
Pages:
2139-2143
Language:
Chinese
ISSN:
1002185X
CODEN:
XJCGEA
Document type:
Journal article (JA)
Publisher:
Rare Metals Materials and Engineering Press, P.O. Box 51, Xi'an, 721014,
China
Abstract:
The process of melt infiltration of WCu alloy was simulated by the finite element
software. A spherical particle skeleton model was established according to the distributing
morphology of W particles. The pressure and the velocity vector distribution of copper liquid in
the flow path were analyzed in isodiametric and non-isodiametric porous system. The
relationship between the depth and time of infiltration in the porous system is obtained when
the average particle size of W powder is 5 μm, which is in good agreement with experimental
values. © 2012, Northwest Institute for Nonferrous Metal Research. Published by Elsevier BV. All
rights reserved.
Number of references:
12
Main heading:
Cerium alloys
Controlled terms:
Alloys - Computer simulation - Finite element method
Uncontrolled terms:
Average particle size - Experimental values - Finite element
software - Flow path - Infiltration process - Melt infiltration - Particle packings Porous system - Spherical particle - Velocity vector distribution
- W-Cu alloys
Classification code:
531.1 Metallurgy - 547.2 Rare Earth Metals - 723.5 Computer
Applications - 921.6 Numerical Methods
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
14.
Accession number:
20130615997015
Title:
Formation of micro spot-welding joint of rapidly solidified Ni-19.8%Sn alloy foils
Authors:
Zhai, Q.Y.1 ; Xu, J.F.1 ; Zhang, X.1 ; Guo, X.F.1/翟秋亚;徐锦锋;;郭学峰
Author affiliation:
1
School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048,
China
Corresponding author:
Zhai, Q. Y. (qiuyazhai@xaut.edu.cn)
Source title:
Advanced Materials Research
Abbreviated source title:
Adv. Mater. Res.
Volume:
630
Monograph title:
Manufacturing Technology
Issue date:
2013
Publication year:
2013
Pages:
23-29
Language:
English
ISSN:
10226680
ISBN-13:
9783037855836
Document type:
Conference article (CA)
Conference name:
2012 International Conference on Manufacturing, Manufacturing 2012
Conference date:
November 14, 2012 - November 15, 2012
Conference location:
Macau, China
Conference code:
95242
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
In this study, the spot welding of rapidly solidified Ni-19.8%Sn alloy foils has been
conducted by a micro-type capacitor discharge welder. The configuration and microstructural
morphology of the joint were examined experimentally and he temperature of the micro nugget
was analyzed numerically. The results show that the micro-joint consists of an oblate spheroid
nugget and a 2.0~3.0 μm thick bond zone. The microstructure of the joint is fine and
homogeneous and there is no coarsening sign in the parent materials near nugget. During
solidification, the cooling rate of nugget is so high to the order of 106K/s that the eutectic
reaction of L &rarr α-Ni + Ni3Sn was suppressed or at least partly suppressed and almost all of
the liquid within the joint solidified into supersaturated α-Ni. Therefore, the joint microstructure
which is consistent with the microstructure of the alloy foils shows the characteristics of rapid
solidification. In addition, A kind of streamline due to vortex flow in micro nugget, with dispersed
dross distributes in cluster along the streamline, is formed under electromagnetic force and
electrode pressure. © (2013) Trans Tech Publications, Switzerland.
Number of references:
13
Main heading:
Tin alloys
Controlled terms:
Alloys - Capacitors - Cerium alloys - Coarsening Manufacture - Morphology - Rapid solidification - Soldered joints - Spot welding
- Tin
Uncontrolled terms:
Capacitor discharge - Capacitor discharge welding - Cooling
rates - Electrode pressure - Electromagnetic forces - Eutectic reactions - Joint
microstructures - Mcro-joint - Micro-joint - Microstructural morphology
- Oblate
spheroid - Parent materials - Rapidly solidified - Sn alloys
Classification code:
933 Solid State Physics - 704.1 Electric Components - 547.2 Rare
Earth Metals - 546.2 Tin and Alloys - 951 Materials Science - 538.2.1 Welding
Processes - 537.1 Heat Treatment Processes - 531.1 Metallurgy - 531 Metallurgy and
Metallography - 538.1.1 Soldering
DOI:
10.4028/www.scientific.net/AMR.630.23
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
15.
Accession number:
20130616000348
Title:
Research on influence of thermal stress on fractured rock mass strength
Authors:
Zhang, Yan1 ; Li, Ning1 ; Yu, Haiming2 ; Xu, Bin3/张艳;李宁;;
Author affiliation:
1
Institute of Geotechnical Engineering, Xi'an University of Technology, Xi'an, Shaanxi 710048,
China
2
Xinjiang Water Conservation Hydroelectricity Survey Design Research Institute, Urumqi,
Xinjiang 830000, China
3
State Key Laboratory of Hydroscience and Engineering, Tsinghua University, Beijing 100084,
China
Corresponding author:
Zhang, Y. (ylozy@126.com)
Source title:
Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and
Engineering
Abbreviated source title:
Yanshilixue Yu Gongcheng Xuebao
Volume:
32
Issue:
SUPPL.1
Issue date:
January 2013
Publication year:
2013
Pages:
2660-2668
Language:
Chinese
ISSN:
10006915
CODEN:
YLGXF5
Document type:
Journal article (JA)
Publisher:
Academia Sinica, Wuhan, 430071, China
Abstract:
Based on the theory of fracture mechanics, influence law of rock strength with
single fracture, a set of fracture and multiple sets of fractures under the action of temperature
stress caused by the temperature field higher than room temperature field is presented
quantitatively. In the view of theoretical point, starting from elasticity mechanics, using the
analytical method such as equivalent load method and principle of superposition, the thermal
stress expression of a single fracture is added to the structural load expression of a single
expression in representative volume element(REV). The micro-fracture strength expression of
intermittent fractured media, of which crack tip of rock fracture is affected by certain
temperature stress, is deduced. The microscale such as fracture length and fracture direction and
so on is combined effectively and organically with the macroconditions such as temperature and
strength. The strength expression of fractured rock at this stage has been improved. A
exploration of new idea which could demonstrate the macro-, micro-levels and consider
temperature factor fully and describe rock stability comprehensively is elicited. At last, the
relevant experimental results show that the formula established has high reliability.
Number of references:
21
Main heading:
Fracture
Controlled terms:
Crack tips - Cracks - Elasticity - Fracture mechanics Fracture toughness - Rock mechanics - Rocks - Temperature - Thermal stress
Uncontrolled terms:
Analytical method - Elasticity mechanics - Equivalent load
- Fracture length - Fractured media - Fractured rock - Fractured rock mass - High
reliability - Micro-fracture - Micro-scales
- Multiple set - Principle of
superposition - Representative volume element (RVE) - Rock fractures - Rock stability
- Rock strength - Single fracture - Temperature factor - Temperature stress Theoretical points
- Theory of fracture mechanics
Classification code:
421 Strength of Building Materials; Mechanical Properties - 481.1
Geology - 502.1 Mine and Quarry Operations - 641.1 Thermodynamics
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
16.
Accession number:
20130615987704
Title:
Research on pollution control technologies of oil spill in river water with properties
of biochemical materials
Authors:
Zhao, Min1 ; Wei, Bingqian2 ; Liu, Yang2/赵敏;魏炳乾;刘洋
Author affiliation:
1
National Engineering Laboratory for Exploration and Development of Low-permeability Oil,
Gas Fields, Oil and Gas Technology Research Institute of Changqing Oilfield Company, Xi'an,
710021, China
2
College of Hydraulic and Hydropower, Xi'an University of Technology, Xi'an, 710048, China
Corresponding author:
Zhao, M. (zhaomin001_cq@petrochina.com.cn)
Source title:
Advanced Materials Research
Abbreviated source title:
Adv. Mater. Res.
Volume:
643
Monograph title:
Advanced Research on Biochemical Materials and Nanotechnology
Application
Issue date:
2013
Publication year:
2013
Pages:
21-24
Language:
English
ISSN:
10226680
ISBN-13:
9783037855935
Document type:
Conference article (CA)
Conference name:
2012 International Conference on Biochemical Materials and
Nanotechnology Application, BMNA 2012
Conference date:
December 22, 2012 - December 23, 2012
Conference location:
Yichang, China
Conference code:
95237
Sponsor:
International Science and Education Researcher Association, China; Beijing Gireida
Education Research Center; VIP-Information Conference Center, China
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
In recent years, oil spill happens in river frequently, which has serious impact on
the ecological environment and human health. So it is very important to conduct research on the
pollution control technologies of oil spill in the river water. This paper analyzes the domestic and
overseas existing oil spill pollution control technologies and puts forward the method combining
oil recycling machine and oil dispersant to deal with the pollution caused by oil spill in Changqing
Oilfield. Through the comparison, the turntable oil recycling machine and the SC-Y17 oil
dispersant are finally selected. According to the experiment, we find that temperature has a great
influence on the effect of oil dispersant and measures should be taken to improve the property to
make it can adapt to the requirements of the low temperature environment. © (2013) Trans Tech
Publications, Switzerland.
Number of references:
11
Main heading:
Oil spills
Controlled terms:
Materials properties - Nanotechnology - Oil fields - Pollution
control - Pollution induced corrosion - Recycling - Research - River pollution Rivers - Technology
Uncontrolled terms:
Control technologies - Ecological environments - Human
health - Low temperature environment - Oil dispersant - Oil recycling - Oil spill
pollution - Pollution control technology - River water
Classification code:
901.3 Engineering Research - 901 Engineering Profession - 761
Nanotechnology - 511 Oil Field Equipment and Production Operations - 454.2
Environmental Impact and Protection - 453.1 Water Pollution Sources - 453 Water
Pollution - 452.3 Industrial Wastes - 423 Non Mechanical Properties and Tests of Building
Materials - 421 Strength of Building Materials; Mechanical Properties - 407.2 Waterways
DOI:
10.4028/www.scientific.net/AMR.643.21
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
17.
Accession number:
20130515973287
Title:
Design of the mixed gas quantitative analysis based on grating spectral
Authors:
Zhu, Lingjian1 ; Chen, Jianhong1 ; Kang, Shasha1 ; Xiao, Yindi1/朱凌建;陈建红;康
莎莎;
Author affiliation:
1
School of Mechanical and Instrumentation Engineering, Xi'an University of Technology, Xi'an,
710048, China
Corresponding author:
Zhu, L. (zlj_zhy@xaut.edu.cn)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
241-244
Monograph title:
Industrial Instrumentation and Control Systems
Issue date:
2013
Publication year:
2013
Pages:
135-139
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855461
Document type:
Conference article (CA)
Conference name:
2012 International Conference on Measurement, Instrumentation and
Automation, ICMIA 2012
Conference date:
September 15, 2012 - September 16, 2012
Conference location:
Guangzhou, China
Conference code:
95105
Sponsor:
Queensland University of Technology; Korea Maritime University; Hong Kong
Industrial Technology Research Centre; Inha University, Korea
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
A method of mixed gas quantitative analysis with near infrared spectroscopy (NIR)
is described. A single plane diffraction grating is used in the monochromatic spectrum system. A
quantitative analysis system is designed and constructed according to the parameters of the
monochromator. The narrowband beam testing and spectral scanning experiments with methane
and ethane are carried out. A 10nm narrowband beam is successfully obtained by the
monochromatic system when the entrance slit width is 2mm. And a step-scanning resolution of
the outgoing beam's centre wavelength with 0.1nm can be realized within the spectra of
1.0-1.8μm. The results show that methane and ethane have a maxim characteristic absorption
spectrum respectively with the centre wavelength of 1653nm and 1690nm existing between the
spectra of 1.6-1.8μm, which is consistent with the HITRAN database. Presented approach has a
successful application in online mixed gas monitoring with the characteristics of simple structure
and low cost. © (2013) Trans Tech Publications, Switzerland.
Number of references:
10
Main heading:
Diffraction gratings
Controlled terms:
Absorption spectra - Absorption spectroscopy - Diffraction Electromagnetic wave absorption - Ethane - Flight control systems - Infrared devices
- Methane - Near infrared spectroscopy
Uncontrolled terms:
Beam testing - Characteristic absorption - HITRAN database
- Low costs - Mixed gas - Monochromatic spectrum - Narrow bands - Near
Infrared - Simple structures - Slit width
- Spectral scanning
Classification code:
711 Electromagnetic Waves - 711.1 Electromagnetic Waves in
Different Media - 731.1 Control Systems - 741 Light, Optics and Optical Devices - 801
Chemistry - 804.1 Organic Compounds
DOI:
10.4028/www.scientific.net/AMM.241-244.135
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
18.
Accession number:
20130515979772
Title:
Non-geodesic trajectories for filament wound composite truncated conical domes
Authors:
Zu, Lei1 ; He, Qinxiang1 ; Shi, Junping1 ; Li, Hui1/祖磊;何钦相;师俊平;李辉
Author affiliation:
1
Department of Engineering Mechanics, School of Civil Engineering and Architecture, Xi'an
University of Technology, Xi'an 710048, China
Corresponding author:
Zu, L. (lzu@xaut.edu.cn)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
281
Monograph title:
2nd International Conference on Mechanical Engineering, Materials and
Energy, ICMEME 2012
Issue date:
2013
Publication year:
2013
Pages:
304-309
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855928
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Mechanical Engineering, Materials and
Energy, ICMEME 2012
Conference date:
October 26, 2012 - October 27, 2012
Conference location:
Dalian, China
Conference code:
95259
Sponsor:
Trans tech publications
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
The goal of this paper is to present non-geodesic trajectories for filament wound
truncated conical domes for pressure vessels. The fiber trajectories for non-geodesically
overwound truncated conical shells are obtained based on differential geometry and the
non-geodesic winding law. The influence of the slippage coefficient on non-geodesic trajectories
is evaluated in terms of the winding angle distributions. The non-geodesic trajectories
corresponding to various initial winding angles are also illustrated for the given slippage
coefficient. The results show that the winding angle distribution of non-geodesics on a truncated
conical dome has an overall increase with the increase of the slippage coefficient or the initial
winding angle. The present method can provide a significant reference for developing
non-geodesically overwound conical structures. © (2013) Trans Tech Publications, Switzerland.
Number of references:
10
Main heading:
Geodesy
Controlled terms:
Composite materials - Domes - Filament winding - Geometry
- Mechanical engineering - Trajectories
Uncontrolled terms:
Conical structures - Differential geometry - Filament wound
- Non-geodesic - Truncated conical shell - Winding angle
Classification code:
951 Materials Science - 921 Mathematics - 816.1 Processing of
Plastics and Other Polymers - 811 Cellulose, Paper and Wood Products - 608 Mechanical
Engineering, General - 415 Metals, Plastics, Wood and Other Structural Materials - 408.2
Structural Members and Shapes - 405.3 Surveying - 404.1 Military Engineering
DOI:
10.4028/www.scientific.net/AMM.281.304
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
2013-02-22 新增 15 条
1.
Accession number:
20130716013127
Title:
Sensitivity analysis of the influences of rock mechanical parameters on the
deformation of underground caverns
Authors:
Chen, Fangfang1 ; Zhang, Zhiqiang2 ; Li, Ning2/陈方方;张志强;李宁
Author affiliation:
1
School of Architecture and Civil Engineering, Xi'an University of Science and Technology,
Xi'an, 710054, China
2
Institute of Geotechnical Engineering, Xi'an University of Technology, Xi'an 710048, China
Corresponding author:
Chen, F. (love-teaching@126.com)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
275-277
Monograph title:
Applied Mechanics and Materials I
Issue date:
2013
Publication year:
2013
Pages:
262-268
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855911
Document type:
Conference article (CA)
Conference name:
2012 International Conference on Applied Mechanics and Materials,
ICAMM 2012
Conference date:
November 24, 2012 - November 25, 2012
Conference location:
Sanya, China
Conference code:
95257
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
The Main factors affecting the stability of underground caverns are selected,
including the rock mechanical parameters (elastic modulus, Poisson ratio, cohesion and internal
friction angle) and initial ground stress parameter (lateral pressure coefficient). Numerical test
method is adopted to analyze each parameter's sensitivity to surrounding rock displacement.
Sensitivity formula making each values comparable is established. The sensitivity distribution
laws are obtained, and then each parameter's quantitative effect on displacement is discussed.
This work has prominent guiding significance to engineering designs. © (2013) Trans Tech
Publications, Switzerland.
Number of references:
11
Main heading:
Sensitivity analysis
Controlled terms:
Caves
Uncontrolled terms:
Displacement - Engineering design - Initial ground stress Internal friction angle - Lateral pressure coefficient - Numerical tests - Quantitative
effects - Rock mechanical parameters - Sensitivity distributions - Surrounding rock Underground cavern
Classification code:
481.1 Geology - 921 Mathematics
DOI:
10.4028/www.scientific.net/AMM.275-277.262
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number:
20130716025197
Title:
The correction of mutual coupling and the amplitude and phase error based on
digital beamforming receiving antenna
Authors:
Du, Yongxing1, 2 ; Xi, Xiaoli1 ; Xi, Wenjing1 ; Zhou, Lili1/杜永兴;席晓莉;;周丽丽
Author affiliation:
1
School of Automation and Information Engineering, Xi'an University of Technology, Xi'an,
China
2
School of Information Engineering, Inner Mongolia University of Science and Technology,
Baotou, China
Corresponding author:
Du, Y. (dyxql@imust.edu.cn)
Source title:
2012 10th International Symposium on Antennas, Propagation and EM
Theory, ISAPE 2012
Abbreviated source title:
Int. Symp. Antennas, Propag. EM Theory, ISAPE
Monograph title:
2012 10th International Symposium on Antennas, Propagation and EM
Theory, ISAPE 2012
Issue date:
2012
Publication year:
2012
Pages:
231-233
Article number:
6408751
Language:
English
ISBN-13:
9781467317993
Document type:
Conference article (CA)
Conference name:
2012 10th International Symposium on Antennas, Propagation and EM
Theory, ISAPE 2012
Conference date:
October 22, 2012 - October 26, 2012
Conference location:
Xi'an, China
Conference code:
95470
Publisher:
IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC
20036-4928, United States
Abstract:
By measuring the GPS antenna pattern, based on the minimum variance
distortionless response adaptive beamforming principle, An easy method to suppress the mutual
coupling between array antenna elements and the amplitude and phase errors was presented in
this paper and the effectiveness of the proposed algorithm was validated in a four-element linear
equispaced array and circular array and simulation results show the performance of this method.
© 2012 IEEE.
Number of references:
7
Main heading:
Receiving antennas
Controlled terms:
Beamforming
Uncontrolled terms:
Adaptive Beamforming - Amplitude and phase error - Array
antennas - Circular arrays - Digital beam forming - Minimum variance distortionless
response - Mutual coupling
Classification code:
713 Electronic Circuits - 716 Telecommunication; Radar, Radio and
Television - 731 Automatic Control Principles and Applications - 732 Control Devices
DOI:
10.1109/ISAPE.2012.6408751
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number:
20130716016419
Title:
Noise investigation of Terahertz photoconductive emitters
Authors:
Hou, L.1 ; Shi, W.1 ; Chen, S.1 ; Du, Y.1 ; Chen, Y.1/侯磊;施卫;;;;
Author affiliation:
1
Department of Applied Physics, Xian University of Technology, Xian, Shaanxi 710048, China
Corresponding author:
Hou, L.
Source title:
International Conference on Infrared, Millimeter, and Terahertz Waves,
IRMMW-THz
Abbreviated source title:
Int. Conf. Infrared, Millim., Terahertz Waves, IRMMW-THz
Monograph title:
IRMMW-THz 2012 - 37th International Conference on Infrared,
Millimeter, and Terahertz Waves
Issue date:
2012
Publication year:
2012
Article number:
6380254
Language:
English
ISSN:
21622027
E-ISSN:
21622035
ISBN-13:
9781467315975
Document type:
Conference article (CA)
Conference name:
37th International Conference on Infrared, Millimeter and Terahertz
Waves, IRMMW-THz 2012
Conference date:
September 23, 2012 - September 28, 2012
Conference location:
Wollongong, NSW, Australia
Conference code:
95412
Sponsor:
Office of Naval Research Science and Technology; UOW Engineering, School of
Engineering Physics; Centre for Ultrahigh bandwidth Devices for Optical Systems; Edinburgh
Photonics; TYDEX
Publisher:
IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC
20036-4928, United States
Abstract:
The electromagnetic noise generated by terahertz photoconductive emitters was
investigated, and the intensity of noise spectrum was analysed by statistical method. The
relationship between the noise of the emitter and the resistivity as well as carrier lifetime of the
antenna material was obtained. And the effect of carrier lifetime and mobility of antennas on the
THz generation efficiency was investigated. © 2012 IEEE.
Number of references:
8
Main heading:
Antennas
Controlled terms:
Electrooptical effects - Terahertz waves
Uncontrolled terms:
Electromagnetic noise - Noise investigation - Noise spectra
- Photoconductive emitters - Tera Hertz - THz generation
Classification code:
711 Electromagnetic Waves - 716 Telecommunication; Radar, Radio
and Television - 741.1 Light/Optics
DOI:
10.1109/IRMMW-THz.2012.6380254
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number:
20130716012031
Title:
Noise analysis and optimization of terahertz photoconductive emitters
Authors:
Hou, Lei1 ; Shi, Wei1 ; Chen, Suguo1/侯磊;施卫;陈素果
Author affiliation:
1
Department of Applied Physics, Xian University of Technology, Xian 710048, China
Corresponding author:
Hou, L. (houleixaut@hotmail.com)
Source title:
IEEE Journal on Selected Topics in Quantum Electronics
Abbreviated source title:
IEEE J Sel Top Quantum Electron
Volume:
19
Issue:
1
Issue date:
2013
Publication year:
2013
Article number:
6156513
Language:
English
ISSN:
1077260X
CODEN:
IJSQEN
Document type:
Journal article (JA)
Publisher:
Institute of Electrical and Electronics Engineers Inc., 445 Hoes Lane / P.O. Box
1331, Piscataway, NJ 08855-1331, United States
Abstract:
The electromagnetic noise generated by terahertz photoconductive emitters was
investigated, and the intensity of noise spectrum was analyzed by statistical method. The
relationship between the noise of the emitter and the resistivity as well as carrier lifetime of the
antenna material was obtained. And the effect of carrier lifetime and mobility of antennas on the
THz generation efficiency was investigated. Based on those results, GaAs:O material was
fabricated by an ion implantation technique to obtain the required performance. The
signal-to-noise ratio of the GaAs:O emitter was remarkably improved compared with a SI-GaAs
emitter at the same experimental condition. © 1995-2012 IEEE.
Number of references:
21
Main heading:
Signal to noise ratio
Controlled terms:
Antennas - Electrooptical effects - Gallium arsenide - Ion
implantation - Microwave antennas - Semiconducting gallium
Uncontrolled terms:
Electromagnetic noise - Experimental conditions - GaAs Implantation technique - Noise analysis - Noise spectra - Photoconductive antennas
- Photoconductive emitters - SI-GaAs - Signaltonoise ratio (SNR)
- Tera Hertz THz generation
Classification code:
712.1 Semiconducting Materials - 712.1.1 Single Element
Semiconducting Materials - 716 Telecommunication; Radar, Radio and Television - 716.1
Information Theory and Signal Processing - 741.1 Light/Optics - 804 Chemical Products
Generally
DOI:
10.1109/JSTQE.2012.2188781
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number:
20130616005424
Title:
An innovative approaches to key characteristic parameter transform of product
Authors:
Ji, Xiaomin1 ; He, Xuemei1, 2/吉晓民;
Author affiliation:
1
School of Mechanical Instrumental Engineering, Xi'an University of Technology, Xi'an 710048,
Shaanxi, China
2
College of Art and Design, Shaanxi University of Science and Technology, Xi'an 710021,
Shaanxi, China
Corresponding author:
Ji, X.
Source title:
International Review on Computers and Software
Abbreviated source title:
Int. Rev. Comput. Softw.
Volume:
7
Issue:
5
Issue date:
September 2012
Publication year:
2012
Pages:
2431-2434
Language:
English
ISSN:
18286003
E-ISSN:
18286011
Document type:
Journal article (JA)
Publisher:
Praise Worthy Prize Inch, 2959 Ruth Rd.Wantag, New York, 11793-1055,
United States
Abstract:
In this paper, according to the systematic design ideas, innovative theory and
methods of "the key characteristic of parameter transformation" is inventively put forward, and
the design principles and essence of the key characteristic parameters transformation of the
product are mainly illustrated. Based on in-depth analysis of consumers' requirement, the
importance degree of consumer demand is determined by applying to rough set theory, and then
1-3 key characteristics are chosen according to the importance degree of consumers'
requirement. Grounded on this, the operating method of key characteristics parameter
transformation is explored. Variant design is adopted to produce new output by transforming key
characteristic parameters, and the nature of content in product innovation design is analyzed so
as to provide a viable new ideas and methods for innovation and design of the product. © 2012
Praise Worthy Prize S.r.l. - All rights reserved.
Number of references:
9
Main heading:
Product design
Controlled terms:
Feature extraction - Rough set theory
Uncontrolled terms:
Consumer demands - Design Principles - In-depth analysis
- Innovative approaches - Key characteristics - Parameter transformation - Product
innovation - Systematic designs - Theory and methods - Variant design
Classification code:
716 Telecommunication; Radar, Radio and Television - 913.1
Production Engineering - 921.4 Combinatorial Mathematics, Includes Graph Theory, Set
Theory
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number:
20130716008392
Title:
Three dimensional simulation of basin water pollution incidents based on
multi-agent and grid technology
Authors:
Li, Weiqian1 ; Xie, Jiancang1 ; Li, Jianxun1, 2 ; Shen, Hai1, 3/李维乾;解建仓;李建
勋;申海
Author affiliation:
1
Water Resources Research Institute, Xi'an University of Technology, Xi'an, China
2
College of Economics and Management, Xi'an University of Technology, Xi'an, China
3
Department of General Studies, Xi'an International Studies University, Xi'an, China
Corresponding author:
Li, W. (wqli@foxmail.com)
Source title:
Proceedings - 2012 5th International Symposium on Computational
Intelligence and Design, ISCID 2012
Abbreviated source title:
Proc. - Int. Symp. Comput. Intell. Des., ISCID
Volume:
2
Monograph title:
Proceedings - 2012 5th International Symposium on Computational
Intelligence and Design, ISCID 2012
Issue date:
2012
Publication year:
2012
Pages:
470-473
Article number:
6406040
Language:
English
ISBN-13:
9780769548111
Document type:
Conference article (CA)
Conference name:
2012 5th International Symposium on Computational Intelligence and
Design, ISCID 2012
Conference date:
October 28, 2012 - October 29, 2012
Conference location:
Hangzhou, China
Conference code:
95304
Publisher:
IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC
20036-4928, United States
Abstract:
According to the complexity and the uncertainty of emergent water pollution
incidents in a basin, and the demand of the rapid visual access to the future pollution condition
on emergency decision-making platform, this paper puts forward the fast forecasting and
simulation of water pollution diffusion events platform based on the Multi-Agent modeling, the
grid technology and 3S technique. First form a square grid Agent system which contains multiple
WaterAgent, and the WaterAgent was used to describe and depict the spread phenomenon of
pollutants; and then a remote sensing intelligent grid was built based on Agent to manage the
vast and distributed image data of the basin, meanwhile, the high performance computing power
was offered to a huge number of WaterAgent containing pollutants by the use of the grid
middleware. On this basis, the contaminant transport process was fully displayed by 3S technique;
finally, the platform was applied to an emergent water pollution incidents of Weihe River. The
results show that the platform, which can rapidly simulate the emergent water pollution
incidents of the basin, is reasonable and effective. © 2012 IEEE.
Number of references:
10
Main heading:
Three dimensional computer graphics
Controlled terms:
Agents - Artificial intelligence - Information management Middleware - Oil spills - Pollution - Remote sensing - River pollution - Smart
power grids - Three dimensional
- Uncertainty analysis - Water pollution
Uncontrolled terms:
3S techniques - Contaminant transport - GRID middleware
- Grid technologies - High performance computing - Image data - Multi-agent
modeling - Pollution incidents - Square grid - Three dimensional simulations
Visual access
Classification code:
922.1 Probability Theory - 903.2 Information Dissemination - 803
Chemical Agents and Basic Industrial Chemicals - 731.1 Control Systems - 723 Computer
Software, Data Handling and Applications - 706.1 Electric Power Systems - 454.2
Environmental Impact and Protection - 453.1 Water Pollution Sources - 453 Water
Pollution
DOI:
10.1109/ISCID.2012.287
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number:
20130716008157
Title:
Study of channel adaptive hopping technology on industrial wireless networks
Authors:
Liu, Wenzhi1 ; Liu, Zhaobin1 ; Gu, Caidong1 ; Zhao, Hongyi2/;;;
Author affiliation:
1
Jiangsu Province Support Software Engineering R and D, Center for Modern Information
Technology Application in Enterprise, Suzhou Jiangsu, China
2
High Technical College, Xi'An University of Technology, Xian Shanxi, China
Corresponding author:
Liu, W. (lwzsz@126.com)
Source title:
Proceedings - 2012 5th International Symposium on Computational
Intelligence and Design, ISCID 2012
Abbreviated source title:
Proc. - Int. Symp. Comput. Intell. Des., ISCID
Volume:
1
Monograph title:
Proceedings - 2012 5th International Symposium on Computational
Intelligence and Design, ISCID 2012
Issue date:
2012
Publication year:
2012
Pages:
62-64
Article number:
6406875
Language:
English
ISBN-13:
9780769548111
Document type:
Conference article (CA)
Conference name:
2012 5th International Symposium on Computational Intelligence and
Design, ISCID 2012
Conference date:
October 28, 2012 - October 29, 2012
Conference location:
Hangzhou, China
Conference code:
95304
Publisher:
IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC
20036-4928, United States
Abstract:
In order to ensure industrial wireless network communication channel is capable
of a transition to the smooth communication channel when disturbed, and improve the
performance of the coexistence with other RF systems. This paper analyzes the communication
protocol architecture of industrial wireless network, gives the MAC sub-layer integration model of
the ISA SP100.11a and EEE 802.15.4 based on the link layer. Through using channel adaptive
hopping technology, detection and shielding the worse assessment channel, in order to reduce
the influence of the multipath jam, increase the system reliability. © 2012 IEEE.
Number of references:
8
Main heading:
Wireless networks
Controlled terms:
Artificial intelligence - Communication channels (information theory)
- Industry - Medium access control
Uncontrolled terms:
Channel adaptive - Industrial wireless network - Integration
models - Link layers - MAC protocol - MAC sublayer - RF system - System
reliability
Classification code:
913 Production Planning and Control; Manufacturing - 912 Industrial
Engineering and Management - 911 Cost and Value Engineering; Industrial Economics 723.4 Artificial Intelligence - 723 Computer Software, Data Handling and Applications 716.3 Radio Systems and Equipment - 716.1 Information Theory and Signal Processing
DOI:
10.1109/ISCID.2012.24
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number:
20130616004217
Title:
Influence of intermediate principal stress effect on flat punch problems
Authors:
Ma, Zongyuan1 ; Liao, Hongjian2 ; Dang, Faning1/马宗源;廖红建;党发宁
Author affiliation:
1
School of Civil Engineering and Architecture, Xi'An University of Technology, Jinhua South
Road No.5, Xi'an city, Shaanxi, 710048, China
2
Department of Civil Engineering, Xi'An Jiaotong University, Xianning west road No.28, Xi'an
city, Shaanxi, 710049, China
Corresponding author:
Ma, Z. (mzy_gogo@hotmail.com)
Source title:
Key Engineering Materials
Abbreviated source title:
Key Eng Mat
Volume:
535-536
Monograph title:
Advances in Engineering Plasticity XI
Issue date:
2013
Publication year:
2013
Pages:
300-305
Language:
English
ISSN:
10139826
CODEN:
KEMAEY
ISBN-13:
9783037855485
Document type:
Conference article (CA)
Conference name:
11th Asia-Pacific Conference on Engineering Plasticity and Its
Applications, AEPA 2012
Conference date:
December 5, 2012 - December 7, 2012
Conference location:
Singapore, Singapore
Conference code:
95345
Publisher:
Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635,
Switzerland
Abstract:
Using the finite difference code FLAC3D (Fast Lagrangian Analysis of Continua in 3
Dimensions) and UST (Unified Strength Theory), the influence of the intermediate principal stress
effect on the problems of flat punch are analyzed in this paper. The values of the limit pressure
resulting from numerical analyses and the analytical solution of Prandtl's strip punch problem are
compared. The three-dimensional problems of strip, rectangular, square and circular punches on
a semi infinite metallic medium have been analyzed. © (2013) Trans Tech Publications,
Switzerland.
Number of references:
14
Main heading:
Strength of materials
Controlled terms:
Numerical analysis - Plasticity
Uncontrolled terms:
3-dimension - Fast Lagrangian analysis of continuum - Finite
difference - Flat punches - Intermediate principal stress effects - Metallic material Punch problem - Three-dimensional problems - Unified strength theory
Classification code:
921.6 Numerical Methods - 951 Materials Science
DOI:
10.4028/www.scientific.net/KEM.535-536.300
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number:
20130716025449
Title:
Study on reduced-rand algorithms for space-time in GPS receiver
Authors:
Wang, Lili1 ; Kang, Bo1 ; Xi, Xiao Li1 ; Du, Yong Xing2/王丽黎;康博;席晓莉;杜永兴
Author affiliation:
1
School of Automation and Information Engineering, Xi'an University of Technology, Xi'an,
China
2
School of Information Engineering, Inner Mongolia University of Science and Technology,
Baotou, China
Corresponding author:
Wang, L. (wanglili@xaut.edu.cn)
Source title:
2012 10th International Symposium on Antennas, Propagation and EM
Theory, ISAPE 2012
Abbreviated source title:
Int. Symp. Antennas, Propag. EM Theory, ISAPE
Monograph title:
2012 10th International Symposium on Antennas, Propagation and EM
Theory, ISAPE 2012
Issue date:
2012
Publication year:
2012
Pages:
1241-1244
Article number:
6409004
Language:
English
ISBN-13:
9781467317993
Document type:
Conference article (CA)
Conference name:
2012 10th International Symposium on Antennas, Propagation and EM
Theory, ISAPE 2012
Conference date:
October 22, 2012 - October 26, 2012
Conference location:
Xi'an, China
Conference code:
95470
Publisher:
IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC
20036-4928, United States
Abstract:
The principle problem about space-time adaptive anti-jam of GPS receiver system
is the high computation complexity. In order to reduce computation complexity, a new algorithm
about Correlation Subtraction Architecture of the Multistage Wiener Filter (CSA-MWF) is
proposed, which is no need to solve the block matrices. In this paper, a new implementing
algorithm for CSA-MWF which needs a lower computation complexity is proposed, while keeping
almost the same performance as the original CSA. The simulation results show the proposed
algorithm can effectively filter almost all kinds of interference, which prove the effectiveness of
the proposed algorithm. © 2012 IEEE.
Number of references:
6
Main heading:
Global positioning system
Controlled terms:
Algorithms - Antennas
Uncontrolled terms:
Anti-jam - Block matrices - Computation complexity GPS receivers - Multi stage Wiener filters
Classification code:
716 Telecommunication; Radar, Radio and Television - 716.3 Radio
Systems and Equipment - 723 Computer Software, Data Handling and Applications - 921
Mathematics
DOI:
10.1109/ISAPE.2012.6409004
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
10.
Accession number:
20130716025202
Title:
A miniature GPS microstrip antenna
Authors:
Wang, Lili1 ; Deng, Lijuan1 ; Xi, Xiaoli1 ; Du, Yongxing1, 2/王丽黎;邓丽娟;席晓莉;
杜永兴
Author affiliation:
1
School of Automation and Information Engineering, Xi'an University of Technology, Xi'an,
China
2
School of Information Engineering, Inner Mongolia University of Science and Technology,
Baotou, China
Corresponding author:
Wang, L. (wanglili@xaut.edu.cn)
Source title:
2012 10th International Symposium on Antennas, Propagation and EM
Theory, ISAPE 2012
Abbreviated source title:
Int. Symp. Antennas, Propag. EM Theory, ISAPE
Monograph title:
2012 10th International Symposium on Antennas, Propagation and EM
Theory, ISAPE 2012
Issue date:
2012
Publication year:
2012
Pages:
250-252
Article number:
6408756
Language:
English
ISBN-13:
9781467317993
Document type:
Conference article (CA)
Conference name:
2012 10th International Symposium on Antennas, Propagation and EM
Theory, ISAPE 2012
Conference date:
October 22, 2012 - October 26, 2012
Conference location:
Xi'an, China
Conference code:
95470
Publisher:
IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC
20036-4928, United States
Abstract:
This paper presents a novel structure of the GPS microstrip antenna, the working
frequency of the antenna is GPS L1 band (at 1.575 GHz). The top-level patch of the antenna is an
irregular shape, this shape is a centre of symmetry, and the purpose of such a design is in order
to reduce the size of the antenna under the premise does not affect the antenna performance.
Use ANSOFT HFSS simulation software to perform the simulation, the results show that the
antenna was able to meet the requirements of the navigation satellite signals. © 2012 IEEE.
Number of references:
6
Main heading:
Satellite antennas
Controlled terms:
Computer software - Global positioning system - Microstrip
antennas
Uncontrolled terms:
Ansoft HFSS - Antenna performance - Irregular shape Navigation satellites - Novel structures - Working frequency
Classification code:
716 Telecommunication; Radar, Radio and Television - 716.3 Radio
Systems and Equipment - 723 Computer Software, Data Handling and Applications
DOI:
10.1109/ISAPE.2012.6408756
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
11.
Accession number:
20130716025305
Title:
Optoelectronic image process the scaling ratios between the light scattering
characteristic and geometric dimensions of the target
Authors:
Wang, Mingjun1 ; Meng, Xue-Hong2 ; Li, Ying Le1 ; Deng, Rong3 ; Xiang,
Ningjing1/;;;;;
Author affiliation:
1
School of Physics and Electronic Engineering, Xian Yang Normal College, Xianyang 712000,
China
2
High technical college, Xi'an University of Technology, Xi'an 710082, China
3
Signature of Environments institute, Beijing 100854, China
Corresponding author:
Wang, M. (wmjxd@yahoo.com.cn)
Source title:
2012 10th International Symposium on Antennas, Propagation and EM
Theory, ISAPE 2012
Abbreviated source title:
Int. Symp. Antennas, Propag. EM Theory, ISAPE
Monograph title:
2012 10th International Symposium on Antennas, Propagation and EM
Theory, ISAPE 2012
Issue date:
2012
Publication year:
2012
Pages:
668-671
Article number:
6408859
Language:
English
ISBN-13:
9781467317993
Document type:
Conference article (CA)
Conference name:
2012 10th International Symposium on Antennas, Propagation and EM
Theory, ISAPE 2012
Conference date:
October 22, 2012 - October 26, 2012
Conference location:
Xi'an, China
Conference code:
95470
Publisher:
IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC
20036-4928, United States
Abstract:
The experimental measurement and image processing methods are combined to
study the light scattering characteristic from the target, principle of the scaling ratio between the
light scattering characteristic and the geometric dimension of the target is presented in this paper.
The solar simulator is utilized as a light source which incidence the target with rough surface. The
original experimental images must be measured by light receiver and data gathering system.
Some image algorithms are be designed to process these experimental data. As a researching
example, the imaging light scattering characteristic of two kinds of bigger and smaller simple
targets include clubs, cylinders are discussed in detail. The image processed results are shown the
scale ratio of the light scattering from target is proportional to its dimensional square. The
important of our works is that the scaling rations of the light scattering characteristic can be used
to make known the illumination of the whole dimensional detected target, which are useful for
further study the complex target such as civilian industries, national defence, air and aero fields.
© 2012 IEEE.
Number of references:
14
Main heading:
Light scattering
Controlled terms:
Antennas - Image processing - Light sources
Uncontrolled terms:
Complex targets - Data gathering systems - Experimental
datum - Experimental measurements - Geometric dimensions - Image algorithms Image process - Image processing - methods - National defence - Rough surfaces
Scale ratio - Scaling ratio - Solar simulator
Classification code:
716 Telecommunication; Radar, Radio and Television - 741 Light,
Optics and Optical Devices - 741.1 Light/Optics
DOI:
10.1109/ISAPE.2012.6408859
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
12.
Accession number:
20130616005417
Title:
A Next-generation Broadband Multi-Mode Intelligent Gateway for a smart home
system
Authors:
Wang, Zhixiao1, 2 ; Zhang, Kewang1 ; Yan, Wenyao3 ; Shehadeh, Youssef El Hajj4 ;
Gao, Ang1/;;;;
Author affiliation:
1
School of Electronic and Information Engineering, Xi'an Jiaotong University, Xi'an 710049,
Shaanxi, China
2
School of Computer Science and Engineering, Xi'an University of Technology, Xi'an 710048,
Shaanxi, China
3
Xi'an Innovation College, Yan'an University, Xi'an 710058, Shaanxi, China
4
Institute of Informatics, University of Goettingen, Goettingen 37077, Germany
Corresponding author:
Wang, Z.
Source title:
International Review on Computers and Software
Abbreviated source title:
Int. Rev. Comput. Softw.
Volume:
7
Issue:
5
Issue date:
September 2012
Publication year:
2012
Pages:
2378-2383
Language:
English
ISSN:
18286003
E-ISSN:
18286011
Document type:
Journal article (JA)
Publisher:
Praise Worthy Prize Inch, 2959 Ruth Rd.Wantag, New York, 11793-1055,
United States
Abstract:
Intelligent gateways that interconnect home networks, pubic networks, and
intelligent household devices play a critical role in smart home systems. However, the existing
gateways could hardly be adapted to emerging multiple access methods and the multiple
services' requirements for future smart home environments. This paper introduces the work in
progress in constructing a stable and efficient Next-generation Broadband Multi-mode Intelligent
Gateway (NBMIG) which supports multiple access methods, multiple services, IPv6, security, QoS
and remotely web management. It is mainly based on an IXP425 network processor and a Linux
kernel. We first present the hardware and software architectures of NBMIG, and then we
introduce their in-detailed implementations. In the meantime, a smart home system is proposed
based on NBMIG and household appliances equipped with wireless and ZigBee adapters. Finally,
the effectiveness and feasibility of NBMIG is verified through testing. © 2012 Praise Worthy Prize
S.r.l. - All rights reserved.
Number of references:
23
Main heading:
Gateways (computer networks)
Controlled terms:
Automation - Domestic appliances - Intelligent buildings Personal communication systems
Uncontrolled terms:
Home networks - Household devices - Intelligent gateway
- Intelligent home - Linux kernel - Multimodes - Multiple services Multiple-access method - Network processor - Smart homes
- Smart-home system
- Web management - Work in progress
Classification code:
732 Control Devices - 731 Automatic Control Principles and
Applications - 723 Computer Software, Data Handling and Applications - 718 Telephone
Systems and Related Technologies; Line Communications - 717 Optical Communication 716 Telecommunication; Radar, Radio and Television - 715 Electronic Equipment, General
Purpose and Industrial - 522 Gas Fuels - 402 Buildings and Towers
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
13.
Accession number:
20130616005418
Title:
Resource allocation optimization of workflow with multi-instance and
multi-resource based on Queuing Theory
Authors:
Yang, Mingshun1 ; Han, Zhoupeng1 ; Gao, Xinqin1 ; Liu, Yong1 ; Du, Shaobo1/杨明
顺;;高新勤;刘勇;
Author affiliation:
1
School of Mechanical and Precision Instrument Engineering, Xi' an University of Technology,
Xi' an 710048, Shaanxi, China
Corresponding author:
Yang, M.
Source title:
International Review on Computers and Software
Abbreviated source title:
Int. Rev. Comput. Softw.
Volume:
7
Issue:
5
Issue date:
September 2012
Publication year:
2012
Pages:
2384-2393
Language:
English
ISSN:
18286003
E-ISSN:
18286011
Document type:
Journal article (JA)
Publisher:
Praise Worthy Prize Inch, 2959 Ruth Rd.Wantag, New York, 11793-1055,
United States
Abstract:
Resource allocation of workflow has a direct impact on the average execution time
of process instances and the cost of an enterprise. Workflow resource optimization can
effectively optimize the resource allocation amount to decrease the average running time of
workflow instance and increase resource utilization rate and workflow's running efficiency. In this
paper, time performance of workflow multi instances running are analyzed based on Queuing
Theory, amount relationship between resource allocation amount and average running time of
workflow instance is studied,then the mathematical model of resource optimization under
multi-activity - multi-resource allocation style with constraints of resource cost and amount is
built and the model is solved with simulated annealing algorithm to obtained the optimal
resource allocation scheme to realize resource optimization in workflow running process. An
example of furniture enterprise is illustrated to verify the presented method. © 2012 Praise
Worthy Prize S.r.l. - All rights reserved.
Number of references:
24
Main heading:
Resource allocation
Controlled terms:
Industry - Mathematical models - Optimization - Queueing
theory
Uncontrolled terms:
Average Execution Time - Average running time - Direct
impact - Enterprise IS - Multi-instance - Multi-resource - Optimal resource
allocation - Process instances - Queuing theory - Resource allocation optimization
Resource costs - Resource optimization - Resource utilizations - Running efficiency Running process - Simulated annealing algorithms
Classification code:
911 Cost and Value Engineering; Industrial Economics - 912 Industrial
Engineering and Management - 913 Production Planning and Control; Manufacturing 921 Mathematics - 921.5 Optimization Techniques - 922.1 Probability Theory
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
14.
Accession number:
20130716013493
Title:
Effect of different heat treatments on microstructure and mechanical properties of
steel containing Ni of 9% base and weld metals
Authors:
Zhang, Min1 ; Chu, Qiaoling1 ; Li, Jihong1/张敏;褚巧玲;李继红
Author affiliation:
1
College of Material Science and Engineering, Xi'an University of Technology, Xi'an 710048,
China
Corresponding author:
Zhang, M.
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
275-277
Monograph title:
Applied Mechanics and Materials I
Issue date:
2013
Publication year:
2013
Pages:
2148-2155
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855911
Document type:
Conference article (CA)
Conference name:
2012 International Conference on Applied Mechanics and Materials,
ICAMM 2012
Conference date:
November 24, 2012 - November 25, 2012
Conference location:
Sanya, China
Conference code:
95257
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
An comparative study was made of microstructure and mechanical properties of
steel constaining Ni of 9% in different heat treatments. Shielded metal arc welding (SMAW) was
employed as jointing technique. Double normalizing and tempering (NNT) and quenching,
intercritical quenching and tempering (QLT) were applied as the heat treatments. Instrumented
impact and tensile tests were performed between 20°C and 196°C. The results show that both
the microstructure and mechanical properties of base and weld metals in QLT solution turn out
to be the optimal. © (2013) Trans Tech Publications, Switzerland.
Number of references:
7
Main heading:
Microstructure
Controlled terms:
Mechanical properties - Quenching - Tempering - Tensile
testing
Uncontrolled terms:
Comparative studies - Jointing techniques - Microstructure
and mechanical properties - Quenching and tempering - Shielded metal arc welding Tensile tests - Weld metal
Classification code:
422.2 Strength of Building Materials : Test Methods - 537.1 Heat
Treatment Processes - 933 Solid State Physics - 951 Materials Science
DOI:
10.4028/www.scientific.net/AMM.275-277.2148
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
15.
Accession number:
20130716025368
Title:
Application in low-frequency ground-wave propagation of parallel FDTD based on
GPU
Authors:
Zhou, Lili1 ; Xi, Xiaoli2 ; Du, Yongxing2/周丽丽;席晓莉;杜永兴
Author affiliation:
1
College of Electrical and Information Engineering, Shaanxi University of Science and
Technology, Weiyang District, Shaanxi 710021, China
2
Faculty of Automation and Information Engineering, Xi'an University of Technology, JinHua
South Road 5, Shaanxi 710048, China
Corresponding author:
Zhou, L. (zhoulili@sust.edu.cn)
Source title:
2012 10th International Symposium on Antennas, Propagation and EM
Theory, ISAPE 2012
Abbreviated source title:
Int. Symp. Antennas, Propag. EM Theory, ISAPE
Monograph title:
2012 10th International Symposium on Antennas, Propagation and EM
Theory, ISAPE 2012
Issue date:
2012
Publication year:
2012
Pages:
917-920
Article number:
6408922
Language:
English
ISBN-13:
9781467317993
Document type:
Conference article (CA)
Conference name:
2012 10th International Symposium on Antennas, Propagation and EM
Theory, ISAPE 2012
Conference date:
October 22, 2012 - October 26, 2012
Conference location:
Xi'an, China
Conference code:
95470
Publisher:
IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC
20036-4928, United States
Abstract:
The parallel FDTD technique based on the graphics processing unit (GPU) is used
to predict the low-frequency (LF) ground-wave propagation over irregular terrains in this paper.
First of all, through comparing the prediction results of the smooth earth computed by the serial
FDTD algorithm, the technique is verified. Then, with the specific examples, the speedup
performance of the parallel algorithm is analyzed. The simulation results show that: the
technique can improve the calculation speed greatly for long-distance ground-wave propagation
problems. It provides an effective solution for the FDTD application in the wave propagation
prediction of large-scale. © 2012 IEEE.
Number of references:
11
Main heading:
Computer graphics equipment
Controlled terms:
Antennas - Computer graphics - Finite difference time domain
method - Forecasting - Program processors - Wave propagation
Uncontrolled terms:
Calculation speed - Effective solution - FDTD algorithm FDTD techniques - Graphics Processing Unit - Irregular terrain - Low-frequency Propagation prediction
Classification code:
921.4 Combinatorial Mathematics, Includes Graph Theory, Set Theory 921 Mathematics - 723.5 Computer Applications - 723.1 Computer Programming 722.2 Computer Peripheral Equipment - 716 Telecommunication; Radar, Radio and Television
- 711 Electromagnetic Waves
DOI:
10.1109/ISAPE.2012.6408922
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
16.
Accession number:
20130716013381
Title:
Semi-geodesics-based dome design for filament wound composite pressure
vessels
Authors:
Zu, Lei1 ; He, Qinxiang1 ; Shi, Junping1/祖磊;何钦相;师俊平
Author affiliation:
1
Department of Engineering Mechanics, School of Civil Engineering and Architecture, Xi'an
University of Technology, Xi'an 710048, China
Corresponding author:
Zu, L. (lzu@xaut.edu.cn)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
275-277
Monograph title:
Applied Mechanics and Materials I
Issue date:
2013
Publication year:
2013
Pages:
1601-1604
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037855911
Document type:
Conference article (CA)
Conference name:
2012 International Conference on Applied Mechanics and Materials,
ICAMM 2012
Conference date:
November 24, 2012 - November 25, 2012
Conference location:
Sanya, China
Conference code:
95257
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
In this paper we apply semi-geodesic trajectories to the creation of isotensoid
domes for filament wound pressure vessels. The governing equations for the determination of
the meridian shapes and related winding angle distributions of domes are derived using the
netting analysis and the semi-geodesic winding law. The effects of the slippage coefficient on the
geometry and fiber trajectories of the domes are respectively evaluated in terms of the resulting
meridional curves and fiber angles. It is revealed that the semi-geodesic angles and the dome
depth have an overall decrease with increasing the slippage coefficient. The results also
demonstrate that the use of semi-geodesics significantly enlarge the design space for the
geometry and adapted fiber trajectories of the domes. The present method can provide a
significant reference for the design and production of the domes for semi-geodesically
overwound pressure vessels. © (2013) Trans Tech Publications, Switzerland.
Number of references:
12
Main heading:
Domes
Controlled terms:
Design - Filament winding - Geodesy - Geometry Pressure vessels - Trajectories
Uncontrolled terms:
Composite pressure vessels - Design spaces - Fiber angles
- Filament wound - Governing equations - Meridional curve - Netting analysis -
Semi-geodesics - Winding angle
Classification code:
921 Mathematics - 816.1 Processing of Plastics and Other Polymers
- 619.2 Tanks - 408.2 Structural Members and Shapes - 408 Structural Design - 405.3
Surveying - 404.1 Military Engineering
DOI:
10.4028/www.scientific.net/AMM.275-277.1601
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2013-03-02 新增 10 条
1.
Accession number:
20130816036887
Title:
Workflow process modelling and resource allocation based on polychromatic sets
theory
Authors:
Gao, Xinqin1 ; Xu, Lida2, 3, 4 ; Wang, Xueping5 ; Li, Yan1 ; Yang, Mingshun1 ; Liu,
Yong1/高新勤;;;李言;杨明顺;刘勇
Author affiliation:
1
School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology,
Xi'an 710048, China
2
Antai College of Economics and Management, Shanghai Jiaotong University, Shanghai
200052, China
3
Institute of Computing Technology, Chinese Academy of Sciences, Beijing 100190, China
4
Department of Information Technology and Decision Sciences, Old Dominion University,
Norfolk, VA 23529, United States
5
School of Economics and Finance, Xi'an Jiaotong University, Xi'an 710061, China
Corresponding author:
Gao, X. (xinqingao@gmail.com)
Source title:
Enterprise Information Systems
Abbreviated source title:
Enterp. Inf. Syst.
Volume:
7
Issue:
2
Issue date:
May 2013
Publication year:
2013
Pages:
198-226
Language:
English
ISSN:
17517575
E-ISSN:
17517583
Document type:
Journal article (JA)
Publisher:
Taylor and Francis Ltd., 4 Park Square, Milton Park, Abingdon, Oxfordshire,
OX14 4RN, United Kingdom
Abstract:
In workflow management, studying the relationship between workflow process
activities and resource allocation is one of the interesting research topics. Polychromatic sets
theory (PST) is a relatively new mathematical theory which is especially suitable for treating such
problems. Based on PST, this paper proposes a framework of workflow process modelling and
resource allocation. As the theoretical foundation, polychromatic sets (PS), polychromatic graph
(PG) and isolation operation (IO) of the PS are introduced. Special net structure (SNS), a special
PG with colourless nodes and concolourous edges, is also introduced, and a new workflow
process model and its verification algorithm are presented. Furthermore, a workflow resource
model based on the entity of PS is developed. Based on IO of PS, the allocation mechanism that
considers workflow process and workflow resource is proposed. Finally, a case study is provided
to demonstrate the effectiveness of the above-mentioned theory and method. © 2013 Copyright
Taylor and Francis Group, LLC.
Number of references:
71
Main heading:
Resource allocation
Controlled terms:
Algorithms - Process engineering - Work simplification
Uncontrolled terms:
Hash table - isolation operation - Net structures polychromatic graph - Polychromatic set - Process model - Resource model Verification algorithms - workflow
Classification code:
723 Computer Software, Data Handling and Applications - 731
Automatic Control Principles and Applications - 912 Industrial Engineering and Management
- 921 Mathematics
DOI:
10.1080/17517575.2012.745617
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number:
20130816038246
Title:
Computer aided form design based on multi-channel deformation technology
Authors:
Guo, Lei1, 2 ; Ji, Xiaomin1 ; Bai, Xiaobo1/郭磊;吉晓民;白晓波
Author affiliation:
1
Xi'an University of Technology, Xi'an, 710048, China
2
University of Electronic and Technology of China, Zhongshan Institute, Zhongshan, 528402,
China
Corresponding author:
Guo, L. (79115521@QQ.com)
Source title:
Advanced Materials Research
Abbreviated source title:
Adv. Mater. Res.
Volume:
651
Monograph title:
2012 International Conference on Engineering Materials, ICEM 2012
Issue date:
2013
Publication year:
2013
Pages:
564-568
Language:
English
ISSN:
10226680
ISBN-13:
9783037856130
Document type:
Conference article (CA)
Conference name:
2012 International Conference on Engineering Materials, ICEM 2012
Conference date:
December 30, 2012 - December 31, 2012
Conference location:
Singapore
Conference code:
95489
Sponsor:
Information Engineering Research Institute, USA; Hong Kong Education Society;
Trans Tech Publications inc.; Singapore Management and Sports Science Institute
Publisher:
Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670,
Germany
Abstract:
This paper, proposes a method that designers provide a basic conceptual form
scheme of the products with multi- deformation channel, but a detailed form is modified by the
users according to the locally changeable two or three dimensional models, and the needed
several product form schemes can be achieved through statistic analysis of the feedbacks from
the users. In this process, users redesign the form in the mean while of product evaluation, which
makes the users have a good knowledge of the products and makes the designers get the direct
statistics of the most desirable morph from the perspective of the users. This method combines
the evaluation and design process together, which is able to promote the batter communication,
thus to make design process more efficient. © (2013) Trans Tech Publications, Switzerland.
Number of references:
9
Main heading:
Design
Controlled terms:
Deformation - Three dimensional
Uncontrolled terms:
Computer aided - Design process - Form design Multi-channel - Product evaluation - Product forms - Statistic analysis Three-dimensional model
Classification code:
408 Structural Design - 421 Strength of Building Materials;
Mechanical Properties - 422 Strength of Building Materials; Test Equipment and Methods 902.1 Engineering Graphics
DOI:
10.4028/www.scientific.net/AMR.651.564
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number:
20130716030108
Title:
A search process for appropriate running of adjacent metro trains within stations
based on genetic algorithm
Authors:
Hei, Xinhong1, 2 ; Li, Yuxiang1 ; Wang, Lei1 ; Ma, Qiaomei1/黑新宏;李玉祥;王磊;
Author affiliation:
1
School of Computer Science and Technology, Xi'an University of Technology, Xi'an 710048,
China
2
State Key Laboratory of Rail Traffic Control and Safety, Beijing Jiaotong University, Beijing
100044, China
Corresponding author:
Hei, X. (heixinhongjp@yahoo.co.jp)
Source title:
IEEJ Transactions on Electrical and Electronic Engineering
Abbreviated source title:
IEEJ Trans. Electr. Electron. Eng.
Volume:
8
Issue:
2
Issue date:
March 2013
Publication year:
2013
Pages:
173-181
Language:
English
ISSN:
19314973
E-ISSN:
19314981
Document type:
Journal article (JA)
Publisher:
John Wiley and Sons Inc., 111 River Street, Hoboken, NJ 07030-5774, United
States
Abstract:
To improve the efficiency of adjacent metro trains entering and leaving a station,
we propose an improved genetic algorithm (IGA) which introduces a combinational mutation
strategy to the classical genetic algorithm. Based on this algorithm, the running processes of
adjacent metro trains within stations are optimized. The process is primarily divided into three
stages: posterior trains entering the station, posterior trains stopping at the station, and previous
trains leaving the station. These stages are principally influenced by four factors: the acceleration
and initial speed of the posterior train entering the station; the time when the previous train
leaves the station; and the acceleration of the previous train leaving the station. Moreover, there
are certain coupling features and relationships among these factors. How to search for the
optimal values of these factors is the issue to be discussed in this paper. Experiment results show
that we can obtain an optimal solution in the space established by a suitable combination of
values for these factors, and that the IGA is potentially useful for optimization design. © 2013
Institute of Electrical Engineers of Japan.
Number of references:
9
Main heading:
Genetic algorithms
Controlled terms:
Optimal systems - Optimization
Uncontrolled terms:
Coupling feature - Initial speed - Metro train - Mutation
strategy - Optimal solutions - Optimal values - Optimization design - Running
process - Search process
Classification code:
723 Computer Software, Data Handling and Applications - 921
Mathematics - 921.5 Optimization Techniques
DOI:
10.1002/tee.21837
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number:
20130716026383
Title:
The THz emission properties of GaAs photoconductive antenna with strong
electric fields
Authors:
Hong, Xue1, 2/;
Author affiliation:
1
School of Physics and Electrical Engineering, Weinan Teachers University, Weinan 714000,
China
2
Department of Applied Physics, Xian University of Technology, Xian 710048, China
Corresponding author:
Hong, X.
Source title:
2012 10th International Symposium on Antennas, Propagation and EM
Theory, ISAPE 2012
Abbreviated source title:
Int. Symp. Antennas, Propag. EM Theory, ISAPE
Monograph title:
2012 10th International Symposium on Antennas, Propagation and EM
Theory, ISAPE 2012
Issue date:
2012
Publication year:
2012
Pages:
1188-1191
Article number:
6408990
Language:
English
ISBN-13:
9781467317993
Document type:
Conference article (CA)
Conference name:
2012 10th International Symposium on Antennas, Propagation and EM
Theory, ISAPE 2012
Conference date:
October 22, 2012 - October 26, 2012
Conference location:
Xi'an, China
Conference code:
95470
Publisher:
IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC
20036-4928, United States
Abstract:
The terahertz (THz) emission properties of GaAs photoconductive antennas with
strong electric fields are discussed; the transient transport characteristics of non-equilibrium
carriers (hot electrons) within the photoconductive antenna were comparatively analyzed. It is
shown that there are significant differences in the average drift velocity variation with strong and
weak electric field. In the initial phase, optical wave scattering is mainly caused by small-angle
scattering, carriers are accelerated by ballistic transport to reach higher electron energy in a
shorter time, and the transient drift-velocity quickly rises, which is a main reason of the stronger
THz radiation. © 2012 IEEE.
Number of references:
12
Main heading:
Terahertz waves
Controlled terms:
Antennas - Electric fields - Gallium arsenide - Microwave
antennas - Semiconducting gallium
Uncontrolled terms:
Ballistic transports - Drift velocities - Electron energies GaAs - Non-equilibrium carriers - Optical wave scattering - Photoconductive antennas
- Significant differences - Small-angle scattering - Strong electric fields
- Terahertz
emissions - Terahertz radiation - THz emission - THz radiation - Transient transport
Classification code:
701.1 Electricity: Basic Concepts and Phenomena - 711
Electromagnetic Waves - 712.1.1 Single Element Semiconducting Materials - 716
Telecommunication; Radar, Radio and Television - 804 Chemical Products Generally
DOI:
10.1109/ISAPE.2012.6408990
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number:
20130816046019
Title:
Clonal selection multispectral image fusion based on CP and contourlets
Authors:
Jin, Haiyan1 ; Li, Shuai1/金海燕;李帅
Author affiliation:
1
Xi'an University of Technology, Xi'an, 710048, China
Corresponding author:
Jin, H. (jinhaiyan@xaut.edu.cn)
Source title:
International Journal of Advancements in Computing Technology
Abbreviated source title:
Intl. J. Adv. Comput. Technolog.
Volume:
5
Issue:
3
Issue date:
2013
Publication year:
2013
Pages:
250-258
Language:
English
ISSN:
20058039
E-ISSN:
22339337
Document type:
Journal article (JA)
Publisher:
Advanced Institute of Convergence Information Technology, Myoungbo Bldg
3F,, Bumin-dong 1-ga, Seo-gu, Busan, 602-816, Korea, Republic of
Abstract:
How to obtain valid fusion coefficients is the key problem in image fusion
processing. In terms of the characters of multispectral images, contrast pyramid (CP) and
contourlets are constructed to filter the images. Furthermore, a kind of evolution computation
idea-immune clonal selection algorithm is introduced into image fusion processing to optimize
the fusion coefficients for better fusion results. Fusion performance is evaluated through
subjective inspection, as well as objective fusion performance measurements. Simulation results
of multispectral images clearly demonstrate the superiority of this new approach. When
compared to conventional wavelets and contourlet systems, Information entropy (IE) values keep
at a high level; average grads (AG) values increase averagely about 2.1 and 1.1, respectively;
standard deviation (STD) values increase averagely about 3.4 and 1.9, respectively; computing
efficiencies increase averagely about 34% and 54%, respectively.
Number of references:
13
Main heading:
Image fusion
Controlled terms:
Image classification
Uncontrolled terms:
Clonal selection - Clonal selection algorithms - Computing
efficiency - Contourlet transform - Contourlets - Evolution computation - Fusion
coefficients - Fusion performance - Image fusion processing - Immune clonal
selections
- Information entropy - Multi-spectral image fusions - Multispectral
images - New approaches - Standard deviation
Classification code:
716 Telecommunication; Radar, Radio and Television - 723.2 Data
Processing and Image Processing
DOI:
10.4156/ijact.vol5.issue3.29
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number:
20130816046134
Title:
The research on pulsed eddy current in non-destructive testing for metal casing
Authors:
Wang, Xue-long1, 3 ; Song, Xi-Jin2 ; Zhang, Jing1/王学龙;;张璟
Author affiliation:
1
School of Computer Science and Engineering, Xi'an University of Technology, China
2
Electronic Engineering School, Xi'an Shiyou University, China
3
School of Computer Science, Xi'an Shiyou University, China
Corresponding author:
Song, X. J. (sxj3029@126.com)
Source title:
Journal of Convergence Information Technology
Abbreviated source title:
J. Convergence Inf. Technol.
Volume:
8
Issue:
3
Issue date:
2013
Publication year:
2013
Language:
English
ISSN:
19759320
E-ISSN:
22339299
Document type:
Journal article (JA)
Publisher:
Advanced Institute of Convergence Information Technology, Myoungbo Bldg
3F,, Bumin-dong 1-ga, Seo-gu, Busan, 602-816, Korea, Republic of
Abstract:
The casing defect concludes both mechanical and chemical damage, which has
large influence and damage on well safety or oil and gas bearing layers. Based on the basic
principles of pulsed eddy current technology, this paper proposed the ideas of the
non-destructive testing for metal casing. This method uses a bipolar pulse as an incentive, the
detection signal includes the casing response for multiple frequency. So it can get broadband
detection. By ANSYS finite element simulation software, the induced electromotive force in
receiving coils is numerical calculated. Furthermore, this paper in-depth studies the
characteristics of electromagnetic response for cavity damage and cracks in metal casing. This has
laid a good foundation for qualitative grasp the casing damage conditions.
Number of references:
11
Main heading:
Nondestructive examination
Controlled terms:
Electromotive force - Petroleum deposits
Uncontrolled terms:
Ansys finite elements - Basic principles - Bearing layers Bipolar pulse - Broadband detection - Casing - Casing damage - Chemical damages
- Current pulse - Detection signal
- Electromagnetic response - In-depth study Induced electromotive force - Metal casing - Multiple frequency - Non destructive
testing - Oil and gas - Pulsed eddy current - Receiving coil
Classification code:
421 Strength of Building Materials; Mechanical Properties - 512.1
Petroleum Deposits - 801.4.1 Electrochemistry
DOI:
10.4156/jcit.vol8.issue3.43
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number:
20130716029085
Title:
Sol-gel preparation of La-doped bismuth ferrite thin film and its low-temperature
ferromagnetic and ferroelectric properties
Authors:
Yan, Fuxue1 ; Zhao, Gaoyang1 ; Song, Na1/严富学;赵高扬;宋娜
Author affiliation:
1
School of Materials Science and Engineering, Xi'An University of Technology, Xi'an 710048,
China
Corresponding author:
Zhao, G. (zhaogy@xaut.edu.cn)
Source title:
Journal of Rare Earths
Abbreviated source title:
J Rare Earth
Volume:
31
Issue:
1
Issue date:
January 2013
Publication year:
2013
Pages:
60-64
Language:
English
ISSN:
10020721
CODEN:
JREAE6
Document type:
Journal article (JA)
Publisher:
Chinese Rare Earth Society, 2 Xinjiekouwai Dajie, Beijing, 100088, China
Abstract:
Bi0.85La0.15FeO3 thin film was prepared on ATO glass substrates by sol-gel
technique. The effect of La doping on phase structure, film surface quality, ion valence, and
ferroelectric/magnetic properties of Bi0.85La0.15FeO3 film were investigated. La doping
suppressed the formation of impurity phases and the transition of Fe3+ to Fe2+ ions at room
temperature. Compared with the un-doped BiFeO3, La-doping also increased the average grain
size and the film density, which resulted in the decrease of film leakage current density. The
remanent polarization and saturation magnetization were enhanced significantly by La doping.
The remanent polarization of Bi 0.85La0.15FeO3 films gradually decreased while saturation
magnetization increased with the decrease of measuring temperature within a range from 50 to
300 K. © 2013 The Chinese Society of Rare Earths.
Number of references:
26
Main heading:
Film preparation
Controlled terms:
Iron oxides - Rare earths - Remanence - Saturation
magnetization - Semiconductor doping - Sol-gel process - Sol-gels - Substrates Thin films
Uncontrolled terms:
Average grain size - Bismuth ferrites - Ferroelectric property
- Film density - Glass substrates - Impurity phasis - La doping - Low temperatures
- Measuring temperature - Multiferroic materials
- Room temperature - Sol gel
preparations - Sol-gel technique
Classification code:
708.4 Magnetic Materials - 712.1 Semiconducting Materials 714.2 Semiconductor Devices and Integrated Circuits - 804 Chemical Products Generally 804.2 Inorganic Compounds - 813.1 Coating Techniques
DOI:
10.1016/S1002-0721(12)60235-X
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number:
20130816046139
Title:
Safety program for campus network application system
Authors:
Yang, Peng1 ; Wei, Wei2 ; Shen, Peiyi3 ; Fan, Li4 ; Wang, Wei2 ; Wang, Feng2 ; Song,
Xin2 ; Wang, Zhixiao2 ; Wang, Yongchao2 ; Geng, Jiachen2/杨鹏;魏嵬;沈沛意;范黎;王伟;宋昕;王
志晓;王勇超;耿嘉晨
Author affiliation:
1
Department of Information Engineering, Shaanxi Polytechnic Institute, Shaanxi, Xian'yang,
712000, China
2
School of Computer Science and Engineering, Xi'an University of Technology, Xi'an 710048,
China
3
National school of Software, Xidian University, Xi'an 710071, China
4
Department ofPharmaceutical Chemistry and Analysis, School of Pharmacy, Fourth Military
Medical University, Xian, Shaanxi 710032, China
Corresponding author:
Yang, P. (ypeng791123@yahoo.com.cn)
Source title:
Journal of Convergence Information Technology
Abbreviated source title:
J. Convergence Inf. Technol.
Volume:
8
Issue:
3
Issue date:
2013
Publication year:
2013
Language:
English
ISSN:
19759320
E-ISSN:
22339299
Document type:
Journal article (JA)
Publisher:
Advanced Institute of Convergence Information Technology, Myoungbo Bldg
3F,, Bumin-dong 1-ga, Seo-gu, Busan, 602-816, Korea, Republic of
Abstract:
Nowadays, campus network is faced with varieties of security threats during the
operation This thesis analyses securities and access control system of applications in campus
network, then it puts forward a safe strategy which can be in security defense system and
applications in campus network.
Number of references:
31
Main heading:
Network security
Controlled terms:
Computer networks - Hardware - Information science
Uncontrolled terms:
Campus network - Safety programs - Security defense Security planning - Security threats
Classification code:
605 Small Tools and Hardware - 723 Computer Software, Data
Handling and Applications - 903 Information Science
DOI:
10.4156/jcit.vol8.issue3.48
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number:
20130716029259
Title:
Corrosion resistance of composite coating on magnesium alloy using combined
microarc oxidation and inorganic sealing
Authors:
Yang, Wei1 ; Wang, Ai-Ying1 ; Jiang, Bai-Ling2/杨巍;王爱英;蒋百灵
Author affiliation:
1
Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences,
Ningbo 315201, China
2
School of Material Science and Engineering, Xi'An University of Technology, Xi'an 710048,
China
Corresponding author:
Yang, W. (yangwei_smx@nimte.ac.cn)
Source title:
Transactions of Nonferrous Metals Society of China (English Edition)
Abbreviated source title:
Trans Nonferrous Met Soc China
Volume:
22
Issue:
SUPPL.3
Issue date:
December 2012
Publication year:
2012
Pages:
s760-s763
Language:
English
ISSN:
10036326
CODEN:
TNMCEW
Document type:
Journal article (JA)
Publisher:
Nonferrous Metals Society of China, B12 Fuxing Road, Beijing, 100814, China
Abstract:
The combined microarc oxidation (MAO) and inorganic sealing process was used
to deposit a composite coating to improve the corrosion resistance of AZ31 magnesium alloy. The
surface morphologies of the resulting duplex coatings were studied by SEM. Furthermore, the
corrosion resistance of the coated Mg alloy substrates was investigated using electrochemical
workstation and dropping corrosion test. The results show that the composite coating surface
consists of Mg, Si, O and Na. It is difficult to deposit inorganic coating on a thick MAO coating
surface. As the composite coating was solidified by CO2 under 175 °C, it exhibits a better
corrosion resistance than the MAO monolayer, owing to the thick and compact inorganic coating.
© 2012 The Nonferrous Metals Society of China.
Number of references:
15
Main heading:
Corrosion resistance
Controlled terms:
Carbon dioxide - Composite coatings - Deposits - Inorganic
coatings - Magnesium alloys - Microstructure - Monolayers
Uncontrolled terms:
AZ31 magnesium alloy - Corrosion tests - Duplex coatings
- MAO coatings - Mg alloy - Microarc oxidation - Sealing process
Classification code:
951 Materials Science - 933 Solid State Physics - 813.2 Coating
Materials - 804.2 Inorganic Compounds - 617 Turbines and Steam Turbines - 612
Engines - 542.2 Magnesium and Alloys - 539.1 Metals Corrosion - 532 Metallurgical
Furnaces
DOI:
10.1016/S1003-6326(12)61800-7
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
10.
Accession number:
20130816045919
Title:
Migration existing system to SaaS model
Authors:
Zhu, Yangpeng1, 2 ; Zhang, Jing2/朱养鹏;张璟
Author affiliation:
1
School of Computer Science and Engineering, Xi' an University of Technology, Xi'an 710048,
China
2
School of Economic and Management, Xi' an Shiyou University, Xi'an 710065, China
Corresponding author:
Zhu, Y. (zyp_hello@126.com)
Source title:
Advances in Information Sciences and Service Sciences
Abbreviated source title:
Adv. Inf. Sci. Serv. Sci.
Volume:
5
Issue:
3
Issue date:
2013
Publication year:
2013
Pages:
243-251
Language:
English
ISSN:
19763700
E-ISSN:
22339345
Document type:
Journal article (JA)
Publisher:
Advanced Institute of Convergence Information Technology, Myoungbo Bldg
3F,, Bumin-dong 1-ga, Seo-gu, Busan, 602-816, Korea, Republic of
Abstract:
In order to easily convert existing application to multi-tenant Software as a Service
model, a Java migration platform is proposed. Firstly, the existing application is embed into the
conversion platform and the single-tenant database was transformed to multi-tenant database by
database transformation function. Secondly, each tenant's operation and data access was
isolated in business and database layer by tenant filter function. Thirdly, combined with the
certification and configuration functions in the SaaS conversion platform, the original system was
converted to support multi-tenant SaaS system based on cloud computing with fer resource code
updates. At last, a restaurant management system was migrated and functions and performances
tests were taken to the migrated SaaS system. The results showed that the transformation had a
lower manual workload, a shorter transformation lifecycle and a higher utilization of server
resources.
Number of references:
17
Main heading:
Software as a service (SaaS)
Controlled terms:
Cloud computing - Database systems - Java programming
language - Web services
Uncontrolled terms:
Configuration function - Data access - Database layer Database transformation - Existing systems - Filter function - Management systems Migration - Multi tenants - Multi-tenant database
- Original systems - Server
resources
Classification code:
722.4 Digital Computers and Systems - 723 Computer Software, Data
Handling and Applications
DOI:
10.4156/AISS.vol5.issue3.29
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
2013-03-09 新增 23 条
1.
Accession number: 20130916060989
Title: Reactant concentration and carbonization to the controllable fabrication of carbon
aerogels
Authors: Feng, Yaning1 ; Ge, Liling1 ; Jiang, Bailing1 ; Miao, Lei2 ; Masaki, Tanemura3/冯亚宁;
葛利玲;蒋百灵;;
Author affiliation: 1 Xi'an University of Technology, No.5 Jinhua South Road, Xi'an 710048,
China
2 Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640,
China
3 Department of Frontier Materials, Graduate School of Engineering, Nagoya Institute of
Technology, Nagoya, 4668555, Japan
Corresponding author: Feng, Y. (ynfeng@xaut.edu.cn)
Source title: Materials Science Forum
Abbreviated source title: Mater. Sci. Forum
Volume: 743-744
Monograph title: Energy and Environment Materials
Issue date: 2013
Publication year: 2013
Pages: 20-23
Language: English
ISSN: 02555476
CODEN: MSFOEP
ISBN-13: 9783037856062
Document type: Conference article (CA)
Conference name: Chinese Materials Congress 2012, CMC 2012
Conference date: July 13, 2012 - July 18, 2012
Conference location: Taiyuan, China
Conference code: 95676
Publisher: Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635, Switzerland
Abstract: To improve the controllability of the fabrication of carbon aerogels, the effects of the
concentration of the reactant (RF%) on the structural properties of organic resorcinol formaldehyde (RF) gel and the effects of the carbonization temperature on nano-structure of
carbon aerogels were discussed. The concentration of the reaction was turned from
5%,10%,20%,30%,40%,50%, 55% and 60% to prepare the samples. The RF aerogels were
carbonized at temperature of 700°C, 900°C and 1050°C. The shrinkage and nitrogen gas
adsorption were measured. Experimental results showed that the structural stability of the
organic RF aerogel can be improved by decreasing the shrink in drying process and increasing the
condensation of reactant in the starting solution to a certain value, such as 55%. The ordered
pore size distribution of carbon aerogels with less structure defects is able to be produced
through the effective particle fusing at the carbonization temperature as high as 1050°C. © (2013)
Trans Tech Publications, Switzerland.
Number of references: 11
Main heading: Aerogels
Controlled terms: Carbon - Carbonization - Condensation - Gas adsorption Phenols - Stability
Uncontrolled terms: Carbon aerogels - Carbonization temperatures - Drying process Reactant concentrations - RF aerogels - Starting solutions - Structural stabilities Structure defects
Classification code: 951 Materials Science - 931 Classical Physics; Quantum Theory;
Relativity - 804.1 Organic Compounds - 961 Systems Science - 804 Chemical Products
Generally - 802.2 Chemical Reactions - 801 Chemistry - 802.3 Chemical Operations
DOI: 10.4028/www.scientific.net/MSF.743-744.20
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number: 20130916061869
Title: The simulation of rotary motion of the flexible multi-body dynamics of tower crane
Authors: Gao, Rong1 ; Yang, Jing2 ; Luo, Gang1 ; Yan, Congxun3/;杨静;;
Author affiliation: 1 Chengdu Technological University, Sichuan Chengdu 611730, China
2 Xi'an University of Technology, Sanxi Xi'an 710048, China
3 CDGM GLASS CO.LTD, Sichuan Chengdu 610100, China
Corresponding author: Gao, R. (120472757@qq.com)
Source title: Advanced Materials Research
Abbreviated source title: Adv. Mater. Res.
Volume: 655-657
Monograph title: Engineering Solutions for Manufacturing Processes
Issue date: 2013
Publication year: 2013
Pages: 281-286
Language: English
ISSN: 10226680
ISBN-13: 9783037856482
Document type: Conference article (CA)
Conference name: 2012 3rd International Conference on Advances in Materials and
Manufacturing Processes, ICAMMP 2012
Conference date: December 22, 2012 - December 23, 2012
Conference location: Beihai, China
Conference code: 95671
Sponsor: University of Wollongong, Australia; Northeastern University, China; University of
Science and Technology Beijing; Hong Kong Industrial Technology Research Centre
Publisher: Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany
Abstract: Based on Dynamics of Flexible Multi-body theories, the flexible multi-body model of
tower crane is established, by using the module of ADAMS/FLEX. The vibration characteristics of
tower crane is analysed during the case of braking slewing motion by introducing the modal
neutral file of tower crane flexible jib and mast. Advices are given in this paper for the dynamic
analysis and the control design of tower crane. © (2013) Trans Tech Publications, Switzerland.
Number of references: 6
Main heading: Tower cranes
Controlled terms: Braking - Industrial engineering - Production engineering
Uncontrolled terms: Control design - Flexible bodies - Flexible multi bodies - Flexible
multi-body dynamics - MNF - Multi-body dynamic - Neutral files - ON dynamics Rotary motions - Slewing mechanism
- Slewing motion - Vibration characteristics
Classification code: 602 Mechanical Drives and Transmissions - 693.1 Cranes - 912.1
Industrial Engineering - 913.1 Production Engineering
DOI: 10.4028/www.scientific.net/AMR.655-657.281
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number: 20130916053124
Title: Numerical simulation of flow in centrifugal pump under cavitation and sediment
condition
Authors: Guo, P.C.1, 2 ; Zheng, X.B.1, 2 ; Zhao, Q.1 ; Luo, X.Q.1, 2/郭鹏程;郑兴;赵钦;罗兴锜
Author affiliation: 1 Institute of Water Resources and Hydro-Electric Engineering, Xi'An
University of Technology, No.5 South Jinhua Road, Xi'an, 710048, China
2 FINE Institute for Hydraulic Machinery, A-16F, Huaxing Times Plaza, No.478 Wensan Rd,
Hangzhou, 310013, China
Corresponding author: Guo, P.C.
Source title: IOP Conference Series: Earth and Environmental Science
Abbreviated source title: IOP Conf. Ser. Earth Environ. Sci.
Volume: 15
Issue: PART 3
Monograph title: 26th IAHR Symposium on Hydraulic Machinery and Systems - Session 1:
Hydraulic Turbines and Pumps
Issue date: 2012
Publication year: 2012
Article number: 032056
Language: English
ISSN: 17551307
E-ISSN: 17551315
Document type: Conference article (CA)
Conference name: 26th IAHR Symposium on Hydraulic Machinery and Systems
Conference date: August 19, 2012 - August 23, 2012
Conference location: Beijing, China
Conference code: 95632
Publisher: Institute of Physics Publishing, Temple Circus, Temple Way, Bristol, BS1 6BE, United
Kingdom
Abstract: The sediment concentration is very high in many rivers in the world, especially in
China. The pumps that designed for the clear water are usually seriously abraded. The probability
of pump cavitation is greatly enhanced due to the existence of sand. Under the joint action and
mutual promotion of sand erosion and cavitation, serious abrasion could occurred, and the
hydraulic performance of the pump may be greatly descended, meanwhile the safety and
stability of the whole pump are greatly threatened. Therefore, it is significant to investigate the
cavitation characteristic of pump under sediment flow condition. In this paper, the flow in a
single stage centrifugal pump under cleat water and sediment flow conditions was numerically
simulated. The cavitation performance under clear water was firstly analyzed. Then, The pressure,
velocity and solid particle distribution in centrifugal pump under different particle diameter and
different particle concentration was investigated by using the two-fluid model; The area and
extent of erosion was illustrated by using the particle track model. Finally, the influence of mixed
sand on centrifugal pump performance was investigated. © 2013 Published under licence by IOP
Publishing Ltd.
Number of references: 6
Main heading: Cavitation
Controlled terms: Centrifugal pumps - Erosion - Hydraulic machinery - Pumps Sedimentology - Sediments
Uncontrolled terms: Cavitation characteristics - Cavitation performance - Flow condition
- Hydraulic performance - Joint actions - Particle concentrations - Particle diameters
- Particle tracks - Pump cavitation - Safety and stabilities
- Sand erosion Sediment concentration - Single-stage centrifugal pumps - Solid particle distribution Two fluid model
Classification code: 481.1 Geology - 483 Soil Mechanics and Foundations - 618.2 Pumps
- 631.1.1 Liquid Dynamics - 632.2 Hydraulic Equipment and Machinery
DOI: 10.1088/1755-1315/15/3/032056
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number: 20130816047344
Title: The impact of improving irrigation efficiency on wetland distribution in an agricultural
landscape in the upper reaches of the Yellow River in China
Authors: Jia, Z.1 ; Wu, Z.1 ; Luo, W.1 ; Xi, W.1 ; Tang, S.1 ; Liu, W.L.1 ; Fang, S.1/;;;;;;
Author affiliation: 1 State Key Laboratory of Eco-hydraulic Engineering in Shaanxi, Xi'an
University of Technology, China
Corresponding author: Jia, Z. (zjia@mail.xaut.edu.cn)
Source title: Agricultural Water Management
Abbreviated source title: Agric. Water Manage.
Volume: 121
Issue date: April 2013
Publication year: 2013
Pages: 54-61
Language: English
ISSN: 03783774
CODEN: AWMADF
Document type: Journal article (JA)
Publisher: Elsevier, P.O. Box 211, Amsterdam, 1000 AE, Netherlands
Abstract: Wetlands in irrigated agricultural areas have great environmental benefits as
agricultural pollution sinks; but agricultural development and water resources redistribution have
caused these wetlands to diminish rapidly worldwide. This is the case in the YinNan Irrigation
District (YNID) in the upper reaches of the Yellow River in China, where wetlands once flourished
as the result of large amount of irrigation diversion and low irrigation efficiency. In this paper, we
presented an analytical study on the impact of irrigation water saving practices on wetland
distribution in YNID; we also discussed the effect of considering wetland water consumption as
beneficial or efficient use on the overall water use efficiency. The study area has a maximal
wetland to farmland areal ratio of 10.5% during the irrigation season due to recharges from canal
seepage and field percolation; and 45% of the wetland area remains as the permanent pool area
during the non-irrigation season. The observed maximum water table rise in the irrigation season
is 1.5. m. The current irrigation system efficiency in YNID is 0.30, which is a product of the field
level efficiency of 0.68 and the conveyance efficiency of 0.44. Our analysis presented in this paper
shows that improving the application efficiency to 0.90 at the field level will reduce the maximum
water table rise by 0.53. m, causing the wetland area to shrink by 17% and the subsequent
wetland water consumption to decrease by 11%; further improving conveyance efficiency to 0.60
will reduce the maximum water table rise by 0.95. m, causing the wetland area to shrink by 30%
and the subsequent wetland water consumption to decrease by 19%. These results indicate that
water saving at the conveyance level will have greater impact on wetland water use than that at
the field level. If wetland water consumption is considered as efficient use, this fraction of the
irrigation water loss becomes efficient use, which will increase the system efficiency
proportionally by the percentage of wetland water consumption. The amount of wetlands, and
thus additional beneficial wetland water use, is directly dependent on the amount of traditional
water losses, such as wetland consumption here. The key question then becomes: where lies the
optimum level or the acceptable balance between increasing efficiencies at irrigation scheme
level while providing optimal beneficial use for wetlands. © 2013 Elsevier B.V.
Number of references: 20
Main heading: Wetlands
Controlled terms: Efficiency - Groundwater - Irrigation - Pollution control Reservoirs (water) - River diversion - Solvents - Water conservation - Water
pollution - Water resources
- Water supply
Uncontrolled terms: Conveyance level - Field level - Irrigation efficiency - Water savings - Water loss
Classification code: 913.1 Production Engineering - 821.3 Agricultural Methods - 803
Chemical Agents and Basic Industrial Chemicals - 454.2 Environmental Impact and Protection
- 453 Water Pollution - 446.1 Water Supply Systems - 444.2 Groundwater - 444
Water Resources - 442.2 Land Reclamation - 441.2 Reservoirs - 441 Dams and
Reservoirs; Hydro Development
DOI: 10.1016/j.agwat.2013.01.003
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number: 20130916053447
Title: Experimental study on the flow of a mixed flow pump impeller
Authors: Lu, J.L.1, 2 ; Guo, P.C.1, 2 ; Feng, J.J.1, 2 ; Luo, X.Q.1, 2/卢金玲;郭鹏程;;罗兴锜
Author affiliation: 1 Institute of Water Resources and Hydro-Electric Engineering, Xi'An
University of Technology, No.5 South Jinhua Road, Xi'an 710048, China
2 FINE Institute for Hydraulic Machinery, Huaxing Times Plaza, No.478 Wensan Rd, Hangzhou
310013, China
Corresponding author: Lu, J.L.
Source title: IOP Conference Series: Earth and Environmental Science
Abbreviated source title: IOP Conf. Ser. Earth Environ. Sci.
Volume: 15
Issue: PART 6
Monograph title: 26th IAHR Symposium on Hydraulic Machinery and Systems - Session 4:
Advances in Computational and Experimental Techniques
Issue date: 2012
Publication year: 2012
Article number: 062051
Language: English
ISSN: 17551307
E-ISSN: 17551315
Document type: Conference article (CA)
Conference name: 26th IAHR Symposium on Hydraulic Machinery and Systems
Conference date: August 19, 2012 - August 23, 2012
Conference location: Beijing, China
Conference code: 95632
Publisher: Institute of Physics Publishing, Temple Circus, Temple Way, Bristol, BS1 6BE, United
Kingdom
Abstract: Mixed flow pump is wildly used in many field, the performance of the whole pump is
affected by the flow in the impeller to a great extend. To make clear the flow phenomena in the
mixed flow impeller at design and off-design flow rate condition, a mixed flow unshrouded
impeller was manufactured and the flow in the impeller at design and off-design flow rate was
experimental measured by Particle Image Velocimetry (PIV) in this paper. In the experiment test
device, the volute was specially design and manufactured by transparent material. According to
the experimental result, the distribution of time-average relatively velocity showed the velocity
near blade pressure surface at design flow rate decreases and then increases from inlet to outlet
of the impeller, and that near blade suction surface increase and then decreases. The velocity
near the suction surface decrease from hub to casing, and the minimal velocity appears near the
casing and suction surface. Near the impeller outlet, the relative velocity near blade pressure
surface varies a little alone the span direction; Back-flow phenomena were found at passages
outlet near casing and mid-span sections at partial flow rate. To clarify the effect of volute
geometry on the velocity distribution, the flow in different impeller passages relatively to the
volute tongue was test and the result showed that the velocity distribution in different passages
was similar. © Published under licence by IOP Publishing Ltd.
Number of references: 7
Main heading: Impellers
Controlled terms: Design - Flow rate - Hydraulic machinery - Velocity - Velocity
distribution
Uncontrolled terms: Blade pressure - Blade suction surface - Design flow rate Experiment tests - Experimental studies - Flow Phenomena - Flow rate conditions Impeller outlet - Impeller passage - Mixed flow pump
- Mixed flows - Mixed-flow
impeller - Mixed-flow pump impellers - Off designs - Partial flow rate - Particle
image velocimetries - Relative velocity - Suction surfaces - Time-averages Transparent material
- Unshrouded impellers
Classification code: 408 Structural Design - 601.2 Machine Components - 631 Fluid Flow
- 632.2 Hydraulic Equipment and Machinery - 931.1 Mechanics - 931.3 Atomic and
Molecular Physics
DOI: 10.1088/1755-1315/15/6/062051
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number: 20130916060496
Title: Influence of intermediate principal stress on bearing capacity of metallic cantilever beams
Authors: Ma, Zong-Yuan1 ; Liao, Hong-Jian2 ; Dang, Fa-Ning1/马宗源;廖红建;党发宁
Author affiliation: 1 School of Civil Engineering and Architecture, Xi'an University of
Technology, Xi'an, Shaanxi 710048, China
2 Department of Civil Engineering, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, China
Corresponding author: Ma, Z.-Y. (mzy_gogo@hotmail.com)
Source title: Gongcheng Lixue/Engineering Mechanics
Abbreviated source title: Gongcheng Lixue
Volume: 30
Issue: 1
Issue date: January 2013
Publication year: 2013
Pages: 307-313
Language: Chinese
ISSN: 10004750
CODEN: GOLIEB
Document type: Journal article (JA)
Publisher: Tsinghua University, Tsinghua University Xueyan Plaza, 100084, China
Abstract: The influence of the intermediate principal stress on the bearing capacity for a
rectangular and metallic cantilever beam was analyzed using the explicit finite difference method
and twin shear unified strength theory. The distribution of plastic strain for a cantilever beam
under the limit load state is near two symmetry triangles. The influence of the intermediate
principal stress on the bearing capacity of a metallic cantilever beam is related to the beam
thickness. The influence of the intermediate principal stress on a plane stress beam is lower than
that of a plane strain beam. The influence of the intermediate principal stress on the bearing
capacity of a plane strain beam is independent of the beam length. The influence of the
intermediate principal stress on the bearing capacity of a plane stress beam is increased firstly
and decreased secondly with the beam length increased.
Number of references: 13
Main heading: Cantilever beams
Controlled terms: Bearing capacity
Uncontrolled terms: A-plane - Beam length - Beam thickness - Explicit finite
difference method - Intermediate principal stress - Lagrangian finite differences - Limit
Load - Metallic cantilever - Strength theory - Twin shear unified strength theory
Classification code: 408.2 Structural Members and Shapes - 421 Strength of Building
Materials; Mechanical Properties
DOI: 10.6052/j.issn.1000-4750.2011.07.0438
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number: 20130916053079
Title: Hydraulic design of a low-specific speed Francis runner for a hydraulic cooling tower
Authors: Ruan, H.1 ; Luo, X.Q.1, 2 ; Liao, W.L.1 ; Zhao, Y.P.1/;罗兴锜;廖伟丽;
Author affiliation: 1 Institute of Water Resources and Hydro-Electric Engineering, Xi'An
University of Technology, Xi'an 710048, China
2 FINE Institute for Hydraulic Machinery, Hangzhou 310013, China
Corresponding author: Ruan, H. (ruanhui2012@hotmail.com)
Source title: IOP Conference Series: Earth and Environmental Science
Abbreviated source title: IOP Conf. Ser. Earth Environ. Sci.
Volume: 15
Issue: PART 3
Monograph title: 26th IAHR Symposium on Hydraulic Machinery and Systems - Session 1:
Hydraulic Turbines and Pumps
Issue date: 2012
Publication year: 2012
Article number: 032011
Language: English
ISSN: 17551307
E-ISSN: 17551315
Document type: Conference article (CA)
Conference name: 26th IAHR Symposium on Hydraulic Machinery and Systems
Conference date: August 19, 2012 - August 23, 2012
Conference location: Beijing, China
Conference code: 95632
Publisher: Institute of Physics Publishing, Temple Circus, Temple Way, Bristol, BS1 6BE, United
Kingdom
Abstract: The air blower in a cooling tower is normally driven by an electromotor, and the
electric energy consumed by the electromotor is tremendous. The remaining energy at the outlet
of the cooling cycle is considerable. This energy can be utilized to drive a hydraulic turbine and
consequently to rotate the air blower. The purpose of this project is to recycle energy, lower
energy consumption and reduce pollutant discharge. Firstly, a two-order polynomial is proposed
to describe the blade setting angle distribution law along the meridional streamline in the
streamline equation. The runner is designed by the point-to-point integration method with a
specific blade setting angle distribution. Three different ultra-low-specificspeed Francis runners
with different wrap angles are obtained in this method. Secondly, based on CFD numerical
simulations, the effects of blade setting angle distribution on pressure coefficient distribution and
relative efficiency have been analyzed. Finally, blade angles of inlet and outlet and control
coefficients of blade setting angle distribution law are optimal variables, efficiency and minimum
pressure are objective functions, adopting NSGA-II algorithm, a multi-objective optimization for
ultra-low-specific speed Francis runner is carried out. The obtained results show that the optimal
runner has higher efficiency and better cavitation performance. © 2013 Published under licence
by IOP Publishing Ltd.
Number of references: 5
Main heading: Cooling
Controlled terms: Blowers - Computational fluid dynamics - Cooling towers - Energy
utilization - Hydraulic machinery - Hydraulic turbines - Multiobjective optimization
Uncontrolled terms: Air blowers - Blade angle - Cavitation performance - CFD
numerical simulations - Control coefficients - Cooling cycle - Electric energies Higher efficiency - Hydraulic designs - Minimum pressure
- Multi objective
optimizations (MOO) - NSGA-II algorithm - Objective functions - Optimal variables Point-to-point integrations - Pollutant discharges - Pressure coefficient distribution Relative efficiency - Remaining energies - Setting angles
Classification code: 921.5 Optimization Techniques - 802.1 Chemical Plants and Equipment
- 641.2 Heat Transfer - 921.6 Numerical Methods - 632.2 Hydraulic Equipment and
Machinery - 617.1 Hydraulic Turbines - 525.3 Energy Utilization - 618.3 Blowers and
Fans
DOI: 10.1088/1755-1315/15/3/032011
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number: 20130916060780
Title: A new method for characteristic analysis of the mechanical structure joint
Authors: Shi, Kun1 ; Song, Li1 ; Shi, Junping1 ; Wei, Fengtao1 ; Yuan, Yuan1/石坤;宋俐;师俊平;
魏锋涛;原园
Author affiliation: 1 School of Mechanical and Precise Instrument Engineering, Xi'an
University of Technology, Xi'an 710048, China
Corresponding author: Shi, K. (shikun@xaut.edu.cn)
Source title: Jixie Gongcheng Xuebao/Journal of Mechanical Engineering
Abbreviated source title: Jixie Gongcheng Xuebao
Volume: 49
Issue: 1
Issue date: 2013
Publication year: 2013
Pages: 142-147
Language: Chinese
ISSN: 05776686
CODEN: CHHKA2
Document type: Journal article (JA)
Publisher: Editorial Office of Chinese Journal of Mechanical, 22 Baiwanzhuang Dajie, Beijing,
100037, China
Abstract: To resolve the discontinuous displacement problem in the joint, a new analysis
method based on the interface stress element is proposed. Since the interface stress element
method uses a piecewise rigid-body displacement field, the displacement along the structural
interface is allowed to be discontinuous, which is beneficial to analyze the discontinuous
structure without setting any interlayer elements. According to the Hertz theory and the relation
between the normal load and the normal deformation of the asperity, the equivalent elasticity
modulus in the joint is deduced by the fitting formula of the joint. Under the condition of the
stress wave propagation in a discrete element, the relation between the normal stiffness and the
tangential stiffness of the joint is obtained. Furthermore, the equivalent Poisson ratio is deduced
by the fitting formula of the joint. To verify the effectiveness of the propose analysis method, this
method is applied to a mechanical structure including joints. The comparison between the
theoretical and experimental results validates the feasibility of the proposed method. The results
presented in this work can be considered as a stepping stone to be used toward the further
research of the joint problem. ©2013 Journal of Mechanical Engineering.
Number of references: 18
Main heading: Rigid structures
Controlled terms: Joints (structural components) - Stiffness - Stresses
Uncontrolled terms: Analysis method - Characteristic analysis - Discontinuous
displacement - Discontinuous media mechanics - Discrete elements - Displacement
field - Equivalent elasticity modulus - Fitting formula - Hertz theory - Interface
stress element method
- Interface stress elements - Mechanical structures - Normal
deformations - Normal loads - Normal stiffness - Piece-wise - Rigid body Stepping stone - Stress wave propagation - Structural interface
- Tangential stiffness
- Theoretical and experimental
Classification code: 408 Structural Design - 408.2 Structural Members and Shapes - 421
Strength of Building Materials; Mechanical Properties - 422 Strength of Building Materials;
Test Equipment and Methods - 951 Materials Science
DOI: 10.3901/JME.2013.01.142
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number: 20130916062024
Title: Vibration analysis of tendon-based parallel robot for processing
Authors: Tang, Aofei1 ; Li, Yan1 ; Kong, Lingfei1 ; Cheng, Xiaojuan1/汤奥斐;李言;孔令飞;程晓
娟;
Author affiliation: 1 School of Mechanical and Precision Instrumental Engineering, Xi'an
University of Technology, Xi'an 710048, China
Corresponding author: Tang, A. (tangaofei@xaut.edu.cn)
Source title: Advanced Materials Research
Abbreviated source title: Adv. Mater. Res.
Volume: 655-657
Monograph title: Engineering Solutions for Manufacturing Processes
Issue date: 2013
Publication year: 2013
Pages: 1086-1091
Language: English
ISSN: 10226680
ISBN-13: 9783037856482
Document type: Conference article (CA)
Conference name: 2012 3rd International Conference on Advances in Materials and
Manufacturing Processes, ICAMMP 2012
Conference date: December 22, 2012 - December 23, 2012
Conference location: Beihai, China
Conference code: 95671
Sponsor: University of Wollongong, Australia; Northeastern University, China; University of
Science and Technology Beijing; Hong Kong Industrial Technology Research Centre
Publisher: Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany
Abstract: The vibration characteristics of the tendon-based parallel robot for processing are
presented. Firstly, the free vibration equations of the robot on the stable position and orientation
were modeled, and secondly the natural frequencies were deduced from the transformation of
principal coordinates into modal coordinates. Next, cutting-force model was introduced and the
solutions of the forced vibration equations were obtained from the Runge-Kutta method, where
the minimum natural frequency was taken as basis of the time step that was important for
computation convergence. Lastly, the algorithm was verified by simulations, also including
solution transformation of time domain into frequency domain by Fast Fourier Transformation
(FFT). The vibration properties could be manifested clearly by the solutions in frequency domain.
The results show that the eccentricity and the mass of the moving platform are the important
factors to make system instable in certain excitation frequency. © (2013) Trans Tech Publications,
Switzerland.
Number of references: 9
Main heading: Tendons
Controlled terms: Algorithms - Fast Fourier transforms - Frequency domain analysis Industrial engineering - Modal analysis - Natural frequencies - Production engineering
- Robots - Runge Kutta methods - Vibration analysis
Uncontrolled terms: Cutting forces - Excitation frequency - Fast fourier transformation
(FFT) - FFT algorithm - Forced vibration - Free vibration - Frequency domains Minimum natural frequencies - Modal coordinates - Moving platform
- Parallel
robots - Position and orientations - Principal coordinates - Time domain - Time
step - Vibration characteristics - Vibration properties
Classification code: 943.2 Mechanical Variables Measurements - 921 Mathematics 913.1 Production Engineering - 912.1 Industrial Engineering - 731.5 Robotics - 711.1
Electromagnetic Waves in Different Media - 461.2 Biological Materials and Tissue Engineering
DOI: 10.4028/www.scientific.net/AMR.655-657.1086
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
10.
Accession number: 20130916069481
Title: Microstructure and wear properties of in-situ production of (Fe,Cr)7C3 particulate
bundles reinforced iron matrix composites
Authors: Tian, Jinglai1 ; Ye, Fangxia2 ; Zhong, Lisheng3 ; Xu, Yunhua2/田景来;;;
Author affiliation: 1 School of Metallurgical Engineering, Xian University of Architecture and
Technology, Xian, China
2 School of Materials Science and Engineering, Xian University of Technology, Xian, China
3 Institute of Wear-resistance Materials, Xian University of Architecture and Technology, Xian,
China
Corresponding author: Tian, J. (tjl79@eyou.com)
Source title: Advanced Materials Research
Abbreviated source title: Adv. Mater. Res.
Volume: 652-654
Monograph title: Advances in Materials and Materials Processing
Issue date: 2013
Publication year: 2013
Pages: 64-68
Language: English
ISSN: 10226680
ISBN-13: 9783037856208
Document type: Conference article (CA)
Conference name: 2012 3rd International Conference on Advances in Materials and
Manufacturing Processes, ICAMMP 2012
Conference date: December 22, 2012 - December 23, 2012
Conference location: Beihai, China
Conference code: 95667
Sponsor: University of Wollongong, Australia; Northeastern University, China; University of
Science and Technology Beijing; Hong Kong Industrial Technology Research Centre
Publisher: Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany
Abstract: In-situ production of (Fe,Cr)7C3 particulate bundles-reinforced iron matrix composites
were prepared by infiltration casting between Cr wires and white cast iron at 1200&C plus
subsequent heat treatment. The composites prepared under different heat treatment time were
characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), macrohardness test
and pin-on-disc wear resistance test. The results show that the composite is mainly consist of
(Fe,Cr)7C3 carbides and γ-Fe. The area of the particulate bundles gradually increases with the
increase of heat treatment time, the microstructure evolved from eutectic to hypoeutectic, and
the morphologies of the reinforcements present chrysanthemum-shaped, granular and
intercrystalline eutectics, respectively. The (Fe,Cr)7C3 particulate bundles reinforced composite
has high macrohardness and excellent wear resistance under dry sliding wear testing conditons.
© (2013) Trans Tech Publications, Switzerland.
Number of references: 17
Main heading: Particle reinforced composites
Controlled terms: Carbides - Composite materials - Eutectics - Heat treatment Microstructure - Reinforcement - Sandwich structures - Scanning electron microscopy
- Wear resistance - X ray diffraction
Uncontrolled terms: Dry sliding wear - Heat treatment time - In-situ - In-situ
production - Infiltration casting - Intercrystalline - Iron matrix composites Macro-hardness - Particulate bundles - Pin on disc
- Reinforced composites Wear properties - White cast irons
Classification code: 931.3 Atomic and Molecular Physics - 812.1 Ceramics - 801.4
Physical Chemistry - 951 Materials Science - 741.1 Light/Optics - 421 Strength of
Building Materials; Mechanical Properties - 415 Metals, Plastics, Wood and Other Structural
Materials - 537.1 Heat Treatment Processes
DOI: 10.4028/www.scientific.net/AMR.652-654.64
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
11.
Accession number: 20130916061949
Title: Improvement and realization of miniature flexible gyro in the photoelectric platform
Authors: Wang, Ping1 ; Yang, Jing1 ; Yao, Junjun2/王平;杨静;
Author affiliation: 1 School of Mechanical and Precision Instrument Engineering, Xi'an
University of Technology, Xi'an, China
2 012 Base Military Representative Office, Hanzhong, China
Corresponding author: Wang, P. (hharmony@163.com)
Source title: Advanced Materials Research
Abbreviated source title: Adv. Mater. Res.
Volume: 655-657
Monograph title: Engineering Solutions for Manufacturing Processes
Issue date: 2013
Publication year: 2013
Pages: 697-700
Language: English
ISSN: 10226680
ISBN-13: 9783037856482
Document type: Conference article (CA)
Conference name: 2012 3rd International Conference on Advances in Materials and
Manufacturing Processes, ICAMMP 2012
Conference date: December 22, 2012 - December 23, 2012
Conference location: Beihai, China
Conference code: 95671
Sponsor: University of Wollongong, Australia; Northeastern University, China; University of
Science and Technology Beijing; Hong Kong Industrial Technology Research Centre
Publisher: Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany
Abstract: Generally, it was precession of flexible gyroscopic not gyroscopic nutation which was
just considered in engineering design. However, in photoelectric stabilized platform, this nutation
characteristics of angular position flexible gyro has been restricting the stabilized accuracy of
platform seriously. In this paper, firstly the output characteristics of a miniature flexible gyro was
measured by characteristic of gyroscopic motion, four main kinds of frequency components in
output characteristics was analysed. The methods were realized in the miniature flexible
gyroscope in the laboratory by adopting the two measures of the secondary trap circuit and
improvement of torque component.Test results showed that, the improvements made nutation
frequency of gyro and envelope at 40Hz converged fastly, and the output noise of gyro angular
position was decayed to more than15dB. In the end, the gyro was applied to chariot
photoelectric stabilized platform, the isolation of platform and carrier got improved from 1~2mil
to 0.3mil. © (2013) Trans Tech Publications, Switzerland.
Number of references: 5
Main heading: Gyroscopes
Controlled terms: Industrial engineering - Photoelectricity - Production engineering
Uncontrolled terms: Isolation - Nutation frequency - Skeleton - Torquer - Trap
filter
Classification code: 741.1 Light/Optics - 912.1 Industrial Engineering - 913.1 Production
Engineering - 943.1 Mechanical Instruments
DOI: 10.4028/www.scientific.net/AMR.655-657.697
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
12.
Accession number: 20130916062268
Title: A hybrid PSO algorithm for vehicle routing problem with simultaneous delivery and
pickup
Authors: Wang, Sunxin1, 2 ; Li, Yan1 ; Zhang, Yanrong2/;李言;
Author affiliation: 1 School of Mechanical and Precision Instrument Engineering, Xi'an
University of Technology, Xi'an, China
2 School of Technology, Xi'an University of Technology, Xi'an, China
Corresponding author: Wang, S. (wsx8280@126.com)
Source title: Advanced Materials Research
Abbreviated source title: Adv. Mater. Res.
Volume: 655-657
Monograph title: Engineering Solutions for Manufacturing Processes
Issue date: 2013
Publication year: 2013
Pages: 2326-2330
Language: English
ISSN: 10226680
ISBN-13: 9783037856482
Document type: Conference article (CA)
Conference name: 2012 3rd International Conference on Advances in Materials and
Manufacturing Processes, ICAMMP 2012
Conference date: December 22, 2012 - December 23, 2012
Conference location: Beihai, China
Conference code: 95671
Sponsor: University of Wollongong, Australia; Northeastern University, China; University of
Science and Technology Beijing; Hong Kong Industrial Technology Research Centre
Publisher: Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany
Abstract: In this paper a hybrid algorithm named IPSO-VND is proposed and applied to solving
the vehicle routing problem with simultaneous pickup and delivery (VRPSPD). The IPSO-VND
algorithm combines two meta-heuristics: Improved Particle Swarm Optimization (IPSO) is used to
find a group of excellent solutions, and then the Variable Neighborhood Descent (VND) is
implemented to deeply search to achieve the optimal solution around these solutions. During the
IPSO procedure, in order to make up for the change of a particle's position, a velocity component
is added to the movement of any particle which has been optimized or made feasible. During the
VND procedure, three different neighborhood structures: insertion, swap and cross are
successively used. Computational results on the benchmark problems show that our IPSO-VND
algorithm is effective. © (2013) Trans Tech Publications, Switzerland.
Number of references: 13
Main heading: Algorithms
Controlled terms: Industrial engineering - Network routing - Particle swarm
optimization (PSO) - Production engineering - Routing algorithms
Uncontrolled terms: A-particles - Bench-mark problems - Computational results Hybrid algorithms - Hybrid pso algorithms - Meta heuristics - Neighborhood structure
- Optimal solutions - Pickup and delivery - Simultaneous pickup and deliveries
Variable neighborhood descents - Vehicle Routing Problems - Velocity components
Classification code: 721 Computer Circuits and Logic Elements - 723 Computer Software,
Data Handling and Applications - 912.1 Industrial Engineering - 913.1 Production
Engineering
DOI: 10.4028/www.scientific.net/AMR.655-657.2326
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
13.
Accession number: 20130916053488
Title: Numerical investigation of hub clearance flow in a Kaplan turbine
Authors: Wu, H.1 ; Feng, J.J.1 ; Wu, G.K.1, 2 ; Luo, X.Q.1, 2/;;吴广宽;罗兴锜
Author affiliation: 1 Institute of Water Resources and Hydro-Electric Engineering, Xi'An
University of Technology, Xi'an, Shannxi, 710048, China
2 Fine Institute of Hydraulic Machinery, Zhejiang Fuchunjiang Hydropower Equipment Co., LTD.,
Hangzhou, 310013, Zhejiang, China
Corresponding author: Wu, H.
Source title: IOP Conference Series: Earth and Environmental Science
Abbreviated source title: IOP Conf. Ser. Earth Environ. Sci.
Volume: 15
Issue: PART 7
Monograph title: 26th IAHR Symposium on Hydraulic Machinery and Systems - Session 5:
Application in Industries and in Special Conditions
Issue date: 2012
Publication year: 2012
Article number: 072026
Language: English
ISSN: 17551307
E-ISSN: 17551315
Document type: Conference article (CA)
Conference name: 26th IAHR Symposium on Hydraulic Machinery and Systems
Conference date: August 19, 2012 - August 23, 2012
Conference location: Beijing, China
Conference code: 95632
Publisher: Institute of Physics Publishing, Temple Circus, Temple Way, Bristol, BS1 6BE, United
Kingdom
Abstract: In this paper, the flow field considering the hub clearance flow in a Kaplan turbine has
been investigated through using the commercial CFD code ANSYS CFX based on high-quality
structured grids generated by ANSYS ICEM CFD. The turbulence is simulated by k-ω based shear
stress transport (SST) turbulence model together with automatic near wall treatments. Four kinds
of simulations have been conducted for the runner geometry without hub clearance, with only
the hub front clearance, with only the rear hub clearance, and with both front and rear clearance.
The analysis of the obtained results is focused on the flow structure of the hub clearance flow,
the effect on the turbine performance including hydraulic efficiency and cavitation performance,
which can improve the understanding on the flow field in a Kaplan turbine. © Published under
licence by IOP Publishing Ltd.
Number of references: 5
Main heading: Computational fluid dynamics
Controlled terms: Flow fields - Hydraulic machinery - Kaplan turbines - Turbulence
models
Uncontrolled terms: ANSYS-CFX - Cavitation performance - CFD codes - High quality
- Hydraulic efficiency - Near-wall treatment - Numerical investigations - Shear-stress
transport - Structured grid - Turbine performance
Classification code: 617.1 Hydraulic Turbines - 631 Fluid Flow - 632.2 Hydraulic
Equipment and Machinery
DOI: 10.1088/1755-1315/15/7/072026
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
14.
Accession number: 20130916062263
Title: Relative structure on main influence factors of international trade of new energy
materials
Authors: Xue, WeiXian1 ; Guo, Rong1/薛伟贤;郭蓉
Author affiliation: 1 School of Economics and Management, Xi'an University of Technology,
Xi'an, China
Corresponding author: Xue, W. (479095320@qq.com)
Source title: Advanced Materials Research
Abbreviated source title: Adv. Mater. Res.
Volume: 655-657
Monograph title: Engineering Solutions for Manufacturing Processes
Issue date: 2013
Publication year: 2013
Pages: 2294-2298
Language: English
ISSN: 10226680
ISBN-13: 9783037856482
Document type: Conference article (CA)
Conference name: 2012 3rd International Conference on Advances in Materials and
Manufacturing Processes, ICAMMP 2012
Conference date: December 22, 2012 - December 23, 2012
Conference location: Beihai, China
Conference code: 95671
Sponsor: University of Wollongong, Australia; Northeastern University, China; University of
Science and Technology Beijing; Hong Kong Industrial Technology Research Centre
Publisher: Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany
Abstract: All domestic and foreign literatures on influence factors of international trade of new
energy materials are statistically analyzed by using Meta-analysis method, and fourteen main
influence factors are identified and extracted from previous research results. After that, the
paper analyzes the relative structure among the fourteen factors by using interpretive structural
model. The results show that export subsidy for new energy materials, import subsidy for new
energy materials, insure subsidy, export drawback, export exemption, decreasing tariff for import,
discount loan, import & export surety and revenue growth are superficial and direct influence
factors; support fund growth, export tariff growth and import tariff growth are intermediate and
indirect influence factors; interest of payment for import goods and interest of payment for
export goods are essential and basic influence factors. This analysis is helpful to open out effect
system and mechanism for international trade of new energy materials. © (2013) Trans Tech
Publications, Switzerland.
Number of references: 10
Main heading: Growth (materials)
Controlled terms: Industrial engineering - International trade - Materials - Model
structures - Production engineering
Uncontrolled terms: Effect system - Export subsidies - Import tariff - Influence
factors - Interpretive structural models - Meta-analysis - New energies - Relative
structure - Research results - Revenue growth
Classification code: 408 Structural Design - 902.3 Legal Aspects - 912.1 Industrial
Engineering - 913.1 Production Engineering - 951 Materials Science
DOI: 10.4028/www.scientific.net/AMR.655-657.2294
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
15.
Accession number: 20130916053241
Title: EMD feature entropy based dynamic characteristic extraction of the draft tube of
hydraulic turbines
Authors: Xue, Y.G.1 ; Luo, X.Q.1 ; Wang, H.1/;罗兴锜;
Author affiliation: 1 Institute of Water Resources and Hydropower Engineering, Xi'An
University of Technology, Xi'an 710048, China
Corresponding author: Xue, Y.G.
Source title: IOP Conference Series: Earth and Environmental Science
Abbreviated source title: IOP Conf. Ser. Earth Environ. Sci.
Volume: 15
Issue: PART 4
Monograph title: 26th IAHR Symposium on Hydraulic Machinery and Systems - Session 2:
Sustainable Hydropower
Issue date: 2012
Publication year: 2012
Article number: 042009
Language: English
ISSN: 17551307
E-ISSN: 17551315
Document type: Conference article (CA)
Conference name: 26th IAHR Symposium on Hydraulic Machinery and Systems
Conference date: August 19, 2012 - August 23, 2012
Conference location: Beijing, China
Conference code: 95632
Publisher: Institute of Physics Publishing, Temple Circus, Temple Way, Bristol, BS1 6BE, United
Kingdom
Abstract: In this paper, the test data and storage management, data analysis and other aspects
of the signal presented the turbine tube vibration system design ideas and methods. Describes a
vibration analysis of tube effective method: Based on HHT spectrum of EMD turbine to extract
the dynamic characteristics of information and software to be achieved. The results show that
the method of high accuracy, and has a good feature vector extraction turbine capacity, suitable
for analyzing complex and dynamic characteristics of turbine specific information; and the system
has strong versatility and scalability, and achieve a good real-time performance. No. 1 in a
hydropower station on the real machine test, experimental results show that the system can
effectively monitor the vibration of the draft tube. © Published under licence by IOP Publishing
Ltd.
Number of references: 26
Main heading: Information management
Controlled terms: Extraction - Hydraulic machinery - Hydraulic turbines - Tubes
(components) - Vibration analysis
Uncontrolled terms: Design ideas - Draft tubes - Dynamic characteristics - Feature
entropy - Feature vector extraction - Hydropower stations - Real time performance Specific information - Test data - Tube vibration
- Turbine capacity
Classification code: 616.1 Heat Exchange Equipment and Components - 617.1 Hydraulic
Turbines - 632.2 Hydraulic Equipment and Machinery - 802.3 Chemical Operations 903.2 Information Dissemination - 943.2 Mechanical Variables Measurements
DOI: 10.1088/1755-1315/15/4/042009
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
16.
Accession number: 20130916060774
Title: Calculation model of the normal contact stiffness of joints based on the fractal geometry
and contact theory
Authors: Yang, Hongping1 ; Fu, Weiping1 ; Wang, Wen1 ; Yang, Shiqiang1 ; Li, Pengyang1 ;
Wang, Wei1/杨红平;傅卫平;王雯;杨世强;李鹏阳;王伟
Author affiliation: 1 School of Mechanical and Precision Instrument Engineering, Xi'an
University of Technology, Xi'an 710048, China
Corresponding author: Yang, H. (yanghp8@sohu.com)
Source title: Jixie Gongcheng Xuebao/Journal of Mechanical Engineering
Abbreviated source title: Jixie Gongcheng Xuebao
Volume: 49
Issue: 1
Issue date: 2013
Publication year: 2013
Pages: 102-107
Language: Chinese
ISSN: 05776686
CODEN: CHHKA2
Document type: Journal article (JA)
Publisher: Editorial Office of Chinese Journal of Mechanical, 22 Baiwanzhuang Dajie, Beijing,
100037, China
Abstract: Rough surface asperity parameters are characterized based on fractal geometry
theory. Asperity normal contact stiffness model is developed based on contact mechanics that
the deformation transitions from elastic, through elastic-plastic, to eventually to the plastic,
respectively. The mechanical joints normal contact stiffness calculation model is presented based
on fractal geometry and contact mechanics theory. In different plastic index, the model is
developed the relationship between the joint normal contact load and contact stiffness. The
result shows that plastic index is lesser, asperity is mainly elastic deformation, and the
relationship between normal contact load and stiffness is the approximate linear, that, with the
plastic index increase, asperity is mainly plastic deformation, and the relationship between
normal contact load and stiffness is the strongly nonlinear. At last, normal contact stiffness which
machining surface are milling and grinding are calculated and analyzed for existed experimental
parameters used the model. The comparison result indicates that the present model is consistent
with experiment result. ©2013 Journal of Mechanical Engineering.
Number of references: 21
Main heading: Geomechanics
Controlled terms: Deformation - Elastoplasticity - Fractals - Grinding (machining) Stiffness
Uncontrolled terms: Asperity - Calculation models - Comparison result - Contact
Mechanics - Contact stiffness - Contact theory - Elastic-Plastic - Experimental
parameters - Fractal geometry - Fractal geometry theories
- Machining surfaces Mechanical joints - Normal contact stiffness - Normal contacts - Rough surfaces Strongly nonlinear
Classification code: 421 Strength of Building Materials; Mechanical Properties - 422
Strength of Building Materials; Test Equipment and Methods - 481 Geology and Geophysics
- 606.2 Abrasive Devices and Processes - 921 Mathematics - 951 Materials Science
DOI: 10.3901/JME.2013.01.102
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
17.
Accession number: 20130916054343
Title: Simulation and experiment research on deforming force of slab cold roll-beating
Authors: Yang, Mingshun1 ; Li, Yan1 ; Zheng, Jianming1 ; Yuan, Qilong1/杨明顺;李言;郑建明;袁
启龙
Author affiliation: 1 School of Mechanical and Precision Instrument Engineering, Xi'an
University of Technology, Xi'an, 710048, China
Corresponding author: Yang, M. (Yangmingshun@xaut.edu.cn)
Source title: Sensors and Transducers
Abbreviated source title: Sensors Transducers
Volume: 16
Issue: SPEC. 1
Issue date: 2012
Publication year: 2012
Pages: 285-294
Language: English
E-ISSN: 17265479
Document type: Journal article (JA)
Publisher: International Frequency Sensor Association, 46 Thorny Vineway, Toronto, ON M2J
4J2, Canada
Abstract: Firstly, the principle of slab cold roll-beating is simply described. Then finite element
model of slab cold roll-beating is established with ABAQUS and the simulation is completed.
According to the simulation results, the changes of deforming force and the influence of
technological parameters on the deforming force are analyzed. Finally, in combination with cold
roll-beating experiments, the comparative analysis between the simulation and the experiment
results is completed to test the validity of the finite element model. © 2012 IFSA.
Number of references: 11
Main heading: Experiments
Controlled terms: Deformation - Finite element method
Uncontrolled terms: Cold roll-beating - Deforming force - Experimental studies Finite element simulations - Technological parameters
Classification code: 421 Strength of Building Materials; Mechanical Properties - 422
Strength of Building Materials; Test Equipment and Methods - 901.3 Engineering Research 921.6 Numerical Methods
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
18.
Accession number: 20130916060844
Title: Fatigue test of structural part of airfoil
Authors: Zhang, Yong-Fang1 ; Liu, Xu2 ; Feng, Xue3 ; Lu, Yan-Jun2/张永芳;刘旭;冯雪;吕延军
Author affiliation: 1 School of Printing and Packaging Engineering, Xi'an University of
Technology, Xi'an 710048, Shaanxi, China
2 School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology,
Xi'an 710048, Shaanxi, China
3 School of Aerospace, Tsinghua University, Beijing 100084, China
Corresponding author: Zhang, Y.-F. (zyf_xaut@hotmail.com)
Source title: Jiaotong Yunshu Gongcheng Xuebao/Journal of Traffic and Transportation
Engineering
Abbreviated source title: Jiaotong Yunshu Gongcheng Xuebao
Volume: 12
Issue: 6
Issue date: December 2012
Publication year: 2012
Pages: 55-62
Language: Chinese
ISSN: 16711637
Document type: Journal article (JA)
Publisher: Chang'an University, Southen Middle Section of Xi'an City Second Circular Road, Xi'an,
710064, China
Abstract: Under the alternating loads, the strain gauges were arranged on the test pieces'
surfaces of airfoil web, the stresses and strains of test pieces were recorded, and the sizes and
positions to fatigue damage in the test pieces were detected by X-rays. The positions and damage
severities of test pieces were determined, and the crack growth lifes of airfoil structural parts
were predicted. Test result shows that the fatigue lifes of test pieces are approximate one million
cycles under 40 kN sinusoidal alternating compression load, and they are in good agreement with
the expected distribution of fatigue life (ten thousand-one million cycles). The stresses and
strains from fatigue test and theory calculation are similar in variation trends, and the errors are
about 10%. The high load and the moment around x axis cause the rivet failure and sheet
fracture of test pieces, and the predicted fatigue crack growth life is 10 183 cycles.
Number of references: 20
Main heading: Airfoils
Controlled terms: Crack detection - Cracks - Elasticity - Fatigue damage - Fatigue
testing - Structural design
Uncontrolled terms: Alternating loads - Compression loads - Fatigue cracks - High
load - Life predictions - Sheet fracture - Structural parts - Theory calculation
Classification code: 408.1 Structural Design, General - 421 Strength of Building Materials;
Mechanical Properties - 422.2 Strength of Building Materials : Test Methods - 652.1
Aircraft, General
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
19.
Accession number: 20130916053445
Title: Experimental and numerical study on inlet and outlet conditions of a bulb turbine with
considering free surface
Authors: Zhao, Y.P.1 ; Liao, W.L.1 ; Feng, H.D.1 ; Ruan, H.1 ; Luo, X.Q.1, 2/;廖伟丽;;;罗兴锜
Author affiliation: 1 Institute of Water Resources and Hydro-Electric Engineering, Xi'An
University of Technology, Xi'an, Shannxi Province, China
2 FINE Institute for Hydraulic Machinery, Huaxing Times Plaza, No.478 Wensan Rd, Hangzhou
310013, China
Corresponding author: Zhao, Y.P. (zhaoyp0168@hotmail.com)
Source title: IOP Conference Series: Earth and Environmental Science
Abbreviated source title: IOP Conf. Ser. Earth Environ. Sci.
Volume: 15
Issue: PART 6
Monograph title: 26th IAHR Symposium on Hydraulic Machinery and Systems - Session 4:
Advances in Computational and Experimental Techniques
Issue date: 2012
Publication year: 2012
Article number: 062049
Language: English
ISSN: 17551307
E-ISSN: 17551315
Document type: Conference article (CA)
Conference name: 26th IAHR Symposium on Hydraulic Machinery and Systems
Conference date: August 19, 2012 - August 23, 2012
Conference location: Beijing, China
Conference code: 95632
Publisher: Institute of Physics Publishing, Temple Circus, Temple Way, Bristol, BS1 6BE, United
Kingdom
Abstract: For a bulb turbine, it has a low head and a big runner diameter, and the free surface
influences the flow at the inlet and outlet of the turbine, which bring many problems such as
vibration, cracks and cavitation to the turbine. Therefore, it is difficult to get the precise internal
flow characteristics through a numerical simulation with conventional ideal flow conditions. In
this paper, both numerical and experimental methods are adopted to investigate the flow
characteristics at the inlet and outlet of the bulb turbine with considering free surface. Firstly,
experimental and numerical studies in a low head pressure pipeline are conducted, and the
corresponding boundary condition according with reality is obtained through the comparison
between the model test result and the CFD simulation result. Then, through an analysis of the
velocity and pressure fields at the inlet of the bulb turbine at different heads, the flow
characteristics and rules at the entrance of the bulb turbine have been revealed with considering
free surface; Finally, the performance predictions for a bulb turbine have been conducted by
using the obtained flow rules at the inlet as the boundary condition of a turbine, and the causes
that lead to non-uniform forces on blades, cavitation and vibration have been illustrated in this
paper, which also provide a theory basis for an accurate numerical simulation and optimization
design of a bulb turbine. © Published under licence by IOP Publishing Ltd.
Number of references: 5
Main heading: Inlet flow
Controlled terms: Boundary conditions - Bulb turbines - Cavitation - Computational
fluid dynamics - Computer simulation - Hydraulic machinery - Numerical methods Surfaces - Turbomachine blades
Uncontrolled terms: CFD simulations - Experimental and numerical studies - Flow
charac-teristics - Flow rules - Free surfaces - Ideal flow - Internal flow
characteristics - Low head - Model tests - Non-uniform
- Numerical and
experimental methods - Performance prediction - Pressure field - Simulation and
optimization
Classification code: 931 Classical Physics; Quantum Theory; Relativity - 921.6 Numerical
Methods - 921 Mathematics - 951 Materials Science - 723.5 Computer Applications
- 631.1.1 Liquid Dynamics - 631.1 Fluid Flow, General - 632.2 Hydraulic Equipment and
Machinery
DOI: 10.1088/1755-1315/15/6/062049
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
20.
Accession number: 20130916053408
Title: Numerical simulation of fluid-structure interaction for axial flow blade based on weak
coupling
Authors: Zheng, X.B.1 ; Guo, P.C.1 ; Luo, X.Q.1/郑小波;郭鹏程;罗兴锜
Author affiliation: 1 Institute of Water Resources and Hydro-Electric Engineering, Xi'An
University of Technology, No.5 South Jinhua Road, Xi'an 710048, China
Corresponding author: Zheng, X.B. (zhengxbb@163.com)
Source title: IOP Conference Series: Earth and Environmental Science
Abbreviated source title: IOP Conf. Ser. Earth Environ. Sci.
Volume: 15
Issue: PART 6
Monograph title: 26th IAHR Symposium on Hydraulic Machinery and Systems - Session 4:
Advances in Computational and Experimental Techniques
Issue date: 2012
Publication year: 2012
Article number: 062012
Language: English
ISSN: 17551307
E-ISSN: 17551315
Document type: Conference article (CA)
Conference name: 26th IAHR Symposium on Hydraulic Machinery and Systems
Conference date: August 19, 2012 - August 23, 2012
Conference location: Beijing, China
Conference code: 95632
Publisher: Institute of Physics Publishing, Temple Circus, Temple Way, Bristol, BS1 6BE, United
Kingdom
Abstract: Numerical simulation of three-dimensional flow in whole flow passage of axial flow
hydraulic turbine was conducted based on the Reynolds-averaged N-S equations and the
standard k-Ε model. Stress analysis of axial flow blade were carried on by elasticity unsteady FEM.
The fluid domain and solid domain were calculated by sequential iteration. Based on weak
coupling technology, the fluid-structure interaction analysis of the axial flow blade was conducted.
Instantaneous flow field characteristic and stress distribution on blade were analyzed. According
to the comparing with the results of pure flow numerical simulation, the pressure difference
between press side and suction side increases after considering the FSI, to a certain extent, which
will worsen cavitations performance of the blade. Meanwhile, stress distribution on the blades
do not change significantly, but the maximum stress value increases markedly, and the maximum
displacement reduces slightly. The research demonstrates that the FSI not only changes the
distribution of the flow field in blade area, but also have a greater impact on the stress of the
blades. © Published under licence by IOP Publishing Ltd.
Number of references: 10
Main heading: Axial flow
Controlled terms: Computational fluid dynamics - Elasticity - Flow fields - Fluid
structure interaction - Hydraulic machinery - Iterative methods - Navier Stokes
equations - Stress analysis - Stress concentration - Three dimensional
Uncontrolled terms: Fluid domain - Fluid-structure interaction analysis - Instantaneous
flow - Maximum displacement - Maximum stress - N-S equations - Pressure
differences - Sequential iteration - Suction side - Three-dimensional flow
- Weak
couplings - Whole flow passage
Classification code: 951 Materials Science - 921.6 Numerical Methods - 902.1
Engineering Graphics - 632.2 Hydraulic Equipment and Machinery - 631.1 Fluid Flow,
General - 422 Strength of Building Materials; Test Equipment and Methods - 421 Strength
of Building Materials; Mechanical Properties
DOI: 10.1088/1755-1315/15/6/062012
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
21.
Accession number: 20130916053411
Title: Improved Suter-transformation for complete characteristic curves of pump-turbine
Authors: Zheng, X.B.1, 2 ; Guo, P.C.1, 2 ; Tong, H.Z.1 ; Luo, X.Q.1, 2/郑小波;郭鹏程;;罗兴锜
Author affiliation: 1 Institute of Water Resources and Hydro-Electric Engineering, Xi'An
University of Technology, No.5 South Jinhua Road, Xi'an 710048, China
2 FINE Institute for Hydraulic Machinery, Huaxing Times Plaza, No.478 Wensan Rd, Hangzhou
310013, China
Corresponding author: Zheng, X.B.
Source title: IOP Conference Series: Earth and Environmental Science
Abbreviated source title: IOP Conf. Ser. Earth Environ. Sci.
Volume: 15
Issue: PART 6
Monograph title: 26th IAHR Symposium on Hydraulic Machinery and Systems - Session 4:
Advances in Computational and Experimental Techniques
Issue date: 2012
Publication year: 2012
Article number: 062015
Language: English
ISSN: 17551307
E-ISSN: 17551315
Document type: Conference article (CA)
Conference name: 26th IAHR Symposium on Hydraulic Machinery and Systems
Conference date: August 19, 2012 - August 23, 2012
Conference location: Beijing, China
Conference code: 95632
Publisher: Institute of Physics Publishing, Temple Circus, Temple Way, Bristol, BS1 6BE, United
Kingdom
Abstract: The complete characteristic curve of the pump turbine show "s" characteristic in the
anti-pump and pump working-condition. The multi-numerical values of unit discharge and unit
moment the curve caused by crossover and overlap phenomena of the curve may bring
inconvenience for transition process analysis. In this paper, complete characteristic curves of the
pump turbine were dealt with using improved Suter curve transformation method. A surface
fitting were carried out for transformed WH curve. Therefore, a three-dimensioned surface was
achieved. The transition process of load shedding was analyzed using the curve above-mentioned.
The results show that the method used in the paper can eliminates the uneven distribution,
crossover, overlapping and multi-value characteristic, thus providing convenience for the
transition process analysis of pump-turbine. © Published under licence by IOP Publishing Ltd.
Number of references: 6
Main heading: Hydraulic turbines
Controlled terms: Hydraulic machinery - Pumped storage power plants
Uncontrolled terms: Characteristic curve - Load-shedding - Multi-value Pump-turbines - Surface fitting - Transformation methods - Transition process Unit discharge
Classification code: 402.1 Industrial and Agricultural Buildings - 617.1 Hydraulic Turbines 632.2 Hydraulic Equipment and Machinery
DOI: 10.1088/1755-1315/15/6/062015
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
22.
Accession number: 20130916053493
Title: Study of capillary experiments and hydrologic factors under subsurface drip irrigation
with fractal theory
Authors: Zhou, W.1, 2 ; Cao, L.2/;
Author affiliation: 1 Xi'An University of Technology, Xi'an 710054, China
2 North China University of Water Resources and Electric Power, Henan Zhengzhou 450011,
China
Corresponding author: Zhou, W. (zhouwen@ncwu.edu.cn)
Source title: IOP Conference Series: Earth and Environmental Science
Abbreviated source title: IOP Conf. Ser. Earth Environ. Sci.
Volume: 15
Issue: PART 7
Monograph title: 26th IAHR Symposium on Hydraulic Machinery and Systems - Session 5:
Application in Industries and in Special Conditions
Issue date: 2012
Publication year: 2012
Article number: 072031
Language: English
ISSN: 17551307
E-ISSN: 17551315
Document type: Conference article (CA)
Conference name: 26th IAHR Symposium on Hydraulic Machinery and Systems
Conference date: August 19, 2012 - August 23, 2012
Conference location: Beijing, China
Conference code: 95632
Publisher: Institute of Physics Publishing, Temple Circus, Temple Way, Bristol, BS1 6BE, United
Kingdom
Abstract: Soil spatial variability is one of the primary environmental factors that influences the
hydraulic factors and technical indicators of subsurface drip irrigation (SDI), whose emitters are
buried in the soil. This paper aimed at evaluating these effects of soil spatial variability on
hydrologic factors under SDI. And some SDI emitter and capillary experiments were designed to
obtain test data and distribution of pressure and emitter discharge. First, The results of labyrinth
non-turbulent mosaic drip emitter test and fractal theory were used to research the fractal and
quantitative relationship between single emitter hydrologic factors and soil physical parameters;
and then, the capillary experiments and the relationship among hydrologic factors of capillary
were used to analyze the fractal and quantitative relationship between hydrologic factors of
capillary and soil physical parameters, which explained the inner relationship between spatial
variability of soil and hydrologic factors of filed pipeline network under SDI, and provide theory
support for the plan, design, management and production of SDI. © Published under licence by
IOP Publishing Ltd.
Number of references: 10
Main heading: Subirrigation
Controlled terms: Experiments - Fractals - Hydraulic machinery - Soils
Uncontrolled terms: Drip emitter - Emitter discharges - Environmental factors Fractal theory - Hydraulic factors - Pipeline networks - Production of - Single
emitter - Soil physical parameters - Spatial variability
- Subsurface drip irrigation Technical indicator - Test data
Classification code: 483.1 Soils and Soil Mechanics - 632.2 Hydraulic Equipment and
Machinery - 821.3 Agricultural Methods - 901.3 Engineering Research - 921
Mathematics
DOI: 10.1088/1755-1315/15/7/072031
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
23.
Accession number: 20130916053271
Title: The multi-objective optimization of the horizontal-axis marine current turbine based on
NSGA-II algorithm
Authors: Zhu, G.J.1, 2 ; Guo, P.C.1, 2 ; Luo, X.Q.1, 2 ; Feng, J.J.1, 2/;郭鹏程;罗兴锜;
Author affiliation: 1 Institute of Water Resources and Hydro-Electric Engineering, Xi'An
University of Technology, No.5 South Jinhua Road, Xi'an 710048, China
2 FINE Institute for Hydraulic Machinery, Huaxing Times Plaza, No.478 Wensan Rd, Hangzhou,
310013, China
Corresponding author: Zhu, G.J.
Source title: IOP Conference Series: Earth and Environmental Science
Abbreviated source title: IOP Conf. Ser. Earth Environ. Sci.
Volume: 15
Issue: PART 4
Monograph title: 26th IAHR Symposium on Hydraulic Machinery and Systems - Session 2:
Sustainable Hydropower
Issue date: 2012
Publication year: 2012
Article number: 042039
Language: English
ISSN: 17551307
E-ISSN: 17551315
Document type: Conference article (CA)
Conference name: 26th IAHR Symposium on Hydraulic Machinery and Systems
Conference date: August 19, 2012 - August 23, 2012
Conference location: Beijing, China
Conference code: 95632
Publisher: Institute of Physics Publishing, Temple Circus, Temple Way, Bristol, BS1 6BE, United
Kingdom
Abstract: The present paper describes a hydrodynamic optimization technique for
horizontal-axial marine current turbine. The pitch angle distribution is important to marine
current turbine. In this paper, the pitch angle distribution curve is parameterized as four control
points by Bezier curve method. The coordinates of the four control points are chosen as
optimization variables, and the sample space are structured according to the Box-Behnken
experimental design method (BBD). Then the power capture coefficient and axial thrust
coefficient in design tip-speed ratio is obtained for all the elements in the sample space by CFD
numerical simulation. The power capture coefficient and axial thrust are chosen as objective
function, and quadratic polynomial regression equations are constructed to fit the relationship
between the optimization variables and each objective function according to response surface
model. With the obtained quadratic polynomial regression equations as performance prediction
model, the marine current turbine is optimized using the NSGA-II multi-objective genetic
algorithm, which finally offers an improved marine current turbine. © Published under licence by
IOP Publishing Ltd.
Number of references: 6
Main heading: Turbines
Controlled terms: Computational fluid dynamics - Hydraulic machinery - Multiobjective
optimization
Uncontrolled terms: Axial thrust - Bezier curve - Box-Behnken experimental design CFD numerical simulations - Control point - Hydrodynamic optimizations - Marine
current turbines - Multi objective optimizations (MOO) - Multi-objective genetic
algorithm - NSGA-II
- NSGA-II algorithm - Objective functions - Optimization
variables - Parameterized - Performance prediction models - Pitch angle distribution
- Power capture - Quadratic polynomial - Response surface models - Sample space
- Tip speed ratio
Classification code: 612.3 Gas Turbines and Engines - 632.2 Hydraulic Equipment and
Machinery - 921.5 Optimization Techniques - 921.6 Numerical Methods
DOI: 10.1088/1755-1315/15/4/042039
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
2013-03-16 新增 25 条
1.
Accession number: 20131016076016
Title: Network position, enterprise capabilities and knowledge power
Authors: Dang, Xing-Hua1 ; Zhang, Wei1 ; Hu, Wen-Xiu1/党兴华;张伟;扈文秀
Author affiliation: 1 School of Economics and Management, Xi'an University of Technology,
710054, China
Corresponding author: Dang, X.-H.
Source title: International Conference on Management Science and Engineering - Annual
Conference Proceedings
Abbreviated source title: Int. Conf. Manage. Sci. Eng. - Annu. Conf. Proc.
Monograph title: 2012 International Conference on Management Science and Engineering,
ICMSE 2012 - 19th Annual Conference Proceedings
Issue date: 2012
Publication year: 2012
Pages: 1155-1160
Article number: 6414321
Language: English
ISSN: 21551847
ISBN-13: 9781467330145
Document type: Conference article (CA)
Conference name: 2012 19th Annual International Conference on Management Science and
Engineering, ICMSE 2012
Conference date: September 20, 2012 - September 22, 2012
Conference location: Dallas, TX, United states
Conference code: 95652
Sponsor: National Natural Science Foundation of China; Harbin Institute of Technology
Publisher: IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC 20036-4928,
United States
Abstract: The dependence of node on knowledge resource in technological innovation network
is the basis of knowledge power, and also the prerequisite and guarantee for the the success of
enterprise cooperation innovation. In this study, reference on social network theory and
management theory, use optimal scaling regression to investigate the relation on enterprise
network position, enterprise capabilities and knowledge power in technological innovation
network. The result show that there is a Significant positive correlation between enterprise
network position and knowledge power, enterprise capabilities and knowledge power, enterprise
network position and enterprise capabilities. And the enterprise capabilities has a significant
mediating effect between enterprise network position and knowledge power. © 2012 IEEE.
Number of references: 27
Main heading: Industry
Controlled terms: Management science
Uncontrolled terms: Enterprise capabilities - Enterprise cooperations - Enterprise
networks - knowledge power - Knowledge resource - Management theory Mediating effect - Positive correlations - Social network theory - Technological
innovation
Classification code: 911 Cost and Value Engineering; Industrial Economics - 912 Industrial
Engineering and Management - 912.2 Management - 913 Production Planning and
Control; Manufacturing
DOI: 10.1109/ICMSE.2012.6414321
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number: 20131016076039
Title: The impact of separation of ultimate control rights and cash flow rights on debt financing
cost
Authors: Dang, Xing-Hua1 ; Wang, Yu-Xiao1, 2 ; Yang, Min-Li1/党兴华;;;
Author affiliation: 1 College of Economy and Management, Xi'an University of Technology,
710053, China
2 School of Economics and Management, Xi'an Technological University, 710032, China
Corresponding author: Dang, X.-H.
Source title: International Conference on Management Science and Engineering - Annual
Conference Proceedings
Abbreviated source title: Int. Conf. Manage. Sci. Eng. - Annu. Conf. Proc.
Monograph title: 2012 International Conference on Management Science and Engineering,
ICMSE 2012 - 19th Annual Conference Proceedings
Issue date: 2012
Publication year: 2012
Pages: 1308-1313
Article number: 6414344
Language: English
ISSN: 21551847
ISBN-13: 9781467330145
Document type: Conference article (CA)
Conference name: 2012 19th Annual International Conference on Management Science and
Engineering, ICMSE 2012
Conference date: September 20, 2012 - September 22, 2012
Conference location: Dallas, TX, United states
Conference code: 95652
Sponsor: National Natural Science Foundation of China; Harbin Institute of Technology
Publisher: IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC 20036-4928,
United States
Abstract: To disclose the effects of separation of ultimate controlling rights and cash flow rights
on debt financing cost, this paper examines empirically how ultimate controlling shareholder
influences cost of debt, based on a balanced panel (4880 observations in total) composed of 976
non-financial companies listed in Shenzhen and Shanghai stock exchange during 2006 ∼ 2010
and applied random effect model and parametric tests to empirically investigate the impact of
separation of ultimate controlling rights and cash flow rights on debt financing cost by controlling
related variables. The results show that the separation of ultimate controlling right and cash flow
right does affect cost of debt. Specifically speaking, (1) the ultimate controlling shareholders' cash
flow rights is negatively related to cost of debt, indicating that the higher cash flow rights of
ultimate controlling shareholders,the lower the cost that it expropriates the debtor,the listed
company will use little cost of debt;(2) the degree of separation of ultimate controlling
shareholders' control rights and cash flow rights has significantly negative correlation with cost of
debt, indicating that the supplier of debt capital will charge for higher capital cost for higher
separation of control rights and cash flow rights in order to mitigate agency conflicts, compared
with those companies without separation of control right and cash flow right. © 2012 IEEE.
Number of references: 20
Main heading: Costs
Controlled terms: Industry - Management science - Shareholders
Uncontrolled terms: Capital costs - Cash flow - Control rights - Controlling
shareholders - Debt financing - Degree of separation - Listed companies - Negative
correlation - Parametric test - Random-effect models
- Related variables Shanghai stock exchanges - ultimate controlling
Classification code: 911 Cost and Value Engineering; Industrial Economics - 912.2
Management
DOI: 10.1109/ICMSE.2012.6414344
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number: 20131016083574
Title: Effect investigation of relative humidity and temperature on multi-layer corrugated
sandwich structures
Authors: Dongmei, Wang1 ; Huxiang, Gong1, 2 ; Ziyou, Bai1/王冬梅;;
Author affiliation: 1 Media and Communication School, Shenzhen Polytechnic, Shenzhen
518055, China
2 Printing and Packaging Engineering School, Xi'an University of Technology, Xi'an, China
Corresponding author: Dongmei, W. (sxxawdm@sina.com)
Source title: Journal of Sandwich Structures and Materials
Abbreviated source title: J. Sandw. Struct. Mater.
Volume: 15
Issue: 2
Issue date: March 2013
Publication year: 2013
Pages: 156-167
Language: English
ISSN: 10996362
E-ISSN: 15307972
Document type: Journal article (JA)
Publisher: SAGE Publications Ltd, 55 City Road, London, EC1Y 1SP, United Kingdom
Abstract: The mechanical properties of multi-layer corrugated sandwich structure are
investigated in this paper. The mathematical model in which the structure factors and
temperature and relative humidity are concerned is developed through the cooperation of
theories and experiments. Then the model is normalized by the elastic modulus of the medium
under controlled condition, thus this model can be used to predict the effect of various
temperature and relative humidities on the plateau stress of multi-layer corrugated sandwich
structure under flatwise compression. Comparisons of the predictions and experiments are made
in order to examine the accuracy of the model, and a good correlation is obtained in view of the
experimental error. The proposed model can be applied to the practical material selection and
optimal design of corrugated sandwiches. Meanwhile, the proposed model might provide
valuable information for the investigation of different materials with corrugated sandwich
structure. © The Author(s) 2013 Reprints and permissions:
sagepub.co.uk/journalsPermissions.nav.
Number of references: 10
Main heading: Corrugated materials
Controlled terms: Atmospheric humidity - Experiments - Mathematical models Mechanical properties - Sandwich structures
Uncontrolled terms: Controlled conditions - Corrugated sandwich structures - Different
materials - Experimental errors - Good correlations - Optimal design - Plateau
stress - Practical materials - Relative humidity and temperatures - Structure factors
- Temperature and relative humidity
Classification code: 415 Metals, Plastics, Wood and Other Structural Materials - 443.1
Atmospheric Properties - 694.2 Packaging Materials - 901.3 Engineering Research 921 Mathematics - 951 Materials Science
DOI: 10.1177/1099636212463834
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number: 20131016077354
Title: Survey on fault-tolerant navigation
Authors: Fan, Shunxi1 ; Li, Ye1 ; Hu, Shaolin2/;李晔;胡绍林
Author affiliation: 1 School of Automation, Xi'an University of Technology, Xi'an City, Shannxi,
China
2 State Key Laboratory of Astronautics, P.O.Box505-15, Xi'an City, Shannxi, China
Corresponding author: Fan, S. (fanshunxi511531@126.com)
Source title: Proceedings - 2012 3rd Global Congress on Intelligent Systems, GCIS 2012
Abbreviated source title: Proc. - Global Congr. Intelligent Syst., GCIS
Monograph title: Proceedings - 2012 3rd Global Congress on Intelligent Systems, GCIS 2012
Issue date: 2012
Publication year: 2012
Pages: 241-244
Article number: 6449526
Language: English
ISBN-13: 9780769548609
Document type: Conference article (CA)
Conference name: 2012 3rd Global Congress on Intelligent Systems, GCIS 2012
Conference date: November 6, 2012 - November 8, 2012
Conference location: Wuhan, China
Conference code: 95815
Sponsor: Wuhan University of Technology
Publisher: IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC 20036-4928,
United States
Abstract: Positioning accuracy, availability and reliability of GPS are dependent on the numbers
of visible satellites and geometry structure of satellite constellations. But in poor conditions, it is
difficult to satisfy the needs of the precision positioning. In order to improve the validity of the
GPS receiver in signal masking occasions, a lot of researchers have proposed a variety of methods.
In this paper, the author will analyze the current research status and method of faulttolerant
navigation. Finally, research foreground of faulttolerant navigation is expected briefly. © 2012
IEEE.
Number of references: 20
Main heading: Global positioning system
Controlled terms: Intelligent systems - Navigation - Research - Signal receivers
Uncontrolled terms: Current research status - Fault-tolerant - Geometry structure GPS receivers - Positioning accuracy - Precision positioning - Satellite constellations
Classification code: 716 Telecommunication; Radar, Radio and Television - 716.3 Radio
Systems and Equipment - 717 Optical Communication - 718 Telephone Systems and
Related Technologies; Line Communications - 723.4 Artificial Intelligence - 901.3
Engineering Research
DOI: 10.1109/GCIS.2012.45
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number: 20131016090143
Title: Service selection algorithm based on dynamic assessment for web of things
Authors: He, Xiu-Qing1, 2 ; Wang, Ying-Hui1/何秀青;王映辉
Author affiliation: 1 Faculty of Computer Science and Engineering, Xi'an University of
Technology, Xi'an, Shaanxi 710048, China
2 School of Computer Science, Shaanxi Normal University, Xi'an, Shaanxi 710062, China
Corresponding author: He, X.-Q. (xiuqing@snnu.edu.cn)
Source title: Tien Tzu Hsueh Pao/Acta Electronica Sinica
Abbreviated source title: Tien Tzu Hsueh Pao
Volume: 41
Issue: 1
Issue date: January 2013
Publication year: 2013
Pages: 117-122
Language: Chinese
ISSN: 03722112
CODEN: TTHPAG
Document type: Journal article (JA)
Publisher: Chinese Institute of Electronics, P.O. Box 165, Beijing, 100036, China
Abstract: Due to WoT (Web of Things) is composed of numbers of resources-limited devices, it
is a challenging work that the optimal web service is selected from a similar functionality service
group based on the non-functional properties (QoS) without heavy interactive query process in
SOA (Service Oriented Architecture). This work focus on the dynamic update process of QoS
attributes vector and the optimal service selection algorithm based on the client's feedback in
WoT. The service time is estimated by the REM (Random Exponential Marking) which use the
concurrent clients number as the price index, and the exponentially weighted average of the
current service expense and the previous record. The service availability is estimated by the
online probability with the service state detection. The Empirical results based on NS-3.13
simulation show that the accuracy of optimal web service selection based on our presented
approaches is significantly better than the simple QoS attributes.
Number of references: 20
Main heading: Algorithms
Controlled terms: Information services - Optimization - Quality of service - Service
oriented architecture (SOA) - Web services - Websites
Uncontrolled terms: Dynamic update - Ideal solutions - Interactive queries - Non
functional properties - ON dynamics - Price index - QoS attributes - Random
exponential markings - Service availability - Service groups
- Service selection Service time - Soa (serviceoriented architecture) - State Detection - Web of things Web service selection - Weighted averages
Classification code: 921 Mathematics - 903.4 Information Services - 723 Computer
Software, Data Handling and Applications - 921.5 Optimization Techniques - 722.4 Digital
Computers and Systems - 717 Optical Communication - 716 Telecommunication; Radar,
Radio and Television - 718 Telephone Systems and Related Technologies; Line
Communications
DOI: 10.3969/j.issn.0372-2112.2013.01.021
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number: 20131016089859
Title: Method of allocating ecological compensation amount of river basin based on improved
Shapley value
Authors: Li, Wei-Qian1 ; Xie, Jian-Cang1 ; Li, Jian-Xun1, 2 ; Shen, Hai1, 3/李维乾;解建仓;李建勋;
申海
Author affiliation: 1 Water Resources Research Institute, Xi'an University of Technology, Xi'an
710048, China
2 College of Economics and Management, Xi'an University of Technology, Xi'an 710048, China
3 Department of General Studies, Xi'an International Studies University, Xi'an 710128, China
Corresponding author: Li, W.-Q. (wqli@foxmail.com)
Source title: Xitong Gongcheng Lilun yu Shijian/System Engineering Theory and Practice
Abbreviated source title: Xitong Gongcheng Lilum yu Shijian
Volume: 33
Issue: 1
Issue date: January 2013
Publication year: 2013
Pages: 255-261
Language: Chinese
ISSN: 10006788
CODEN: XGLSE2
Document type: Journal article (JA)
Publisher: Systems Engineering Society of China, Xitong Yanjiusuo, Beijing, 100080, China
Abstract: In order to make the ecological compensation for river basin more reasonable and
stimulate the water ecological protection initiatives of the upstream region, the water ecological
compensation amount allocation method is proposed based on the model of DEA cooperative
game with the supposition of cooperation among different areas along the basin. Considering the
limitation of classic Shapley value in cooperative game, this value is improved by the weight
among different areas confirmed by trapezoidal fuzzy number. Applied to Xin'an River basin, its
result indicates that the allocation method adopted in this paper not only made the driving force
for ecoloical protection stronger, but also combined the importance of different index such as the
water and its benefits in the basin, meanwhile, the water benefits was considered among
different areas. Thus, it is more reasonable, and it could provide reference for the ecological
compensation amount allocation research of the other basins cross regions.
Number of references: 18
Main heading: Game theory
Controlled terms: Data envelopment analysis - Ecology - Fuzzy rules - Watersheds
Uncontrolled terms: Cooperative game - Ecological compensation - River basins Shapley value - Trapezoidal fuzzy numbers
Classification code: 444.1 Surface Water - 454.3 Ecology and Ecosystems - 731.1 Control
Systems - 922 Statistical Methods - 922.1 Probability Theory
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number: 20130916071101
Title: Design and implementation of AGC testing diagnostic analytic system
Authors: Liang, Li1 ; Ning, Peifeng1 ; Li, Qiang1 ; Wu, Zihao2/梁莉;;李强;
Author affiliation: 1 Xi'an University of Technology, Xi'an, China
2 ShaanXi Electric Power Research Institute, Xi'an, China
Corresponding author: Liang, L. (liangli@xaut.edu.cn)
Source title: Proceedings - 2012 International Conference on Control Engineering and
Communication Technology, ICCECT 2012
Abbreviated source title: Proc. - Int. Conf. Control Eng. Commun. Technol., ICCECT
Monograph title: Proceedings - 2012 International Conference on Control Engineering and
Communication Technology, ICCECT 2012
Issue date: 2012
Publication year: 2012
Pages: 593-596
Article number: 6414036
Language: English
ISBN-13: 9780769548814
Document type: Conference article (CA)
Conference name: 2012 International Conference on Control Engineering and Communication
Technology, ICCECT 2012
Conference date: December 7, 2012 - December 9, 2012
Conference location: Shenyang, Liaoning, China
Conference code: 95648
Publisher: IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC 20036-4928,
United States
Abstract: Automatic Generation Control (AGC) testing diagnostic analytic system of power grid
is used for AGC test between grid dispatching center and the power generator set. It is also for
collecting, processing, analyzing and evaluating the generator set's testing data. Eventually a set
of assessment results can be achieved. This system is mainly used for testing, diagnosing and
evaluating the functions of the power station's generator set, Distributed Control System (DCS)
control system and remote control system (RTU). This system can not only support the message
diagnosis of IEC60870-5-101, IEC60870-5-104, DNP3.0 and so on, but also be used for collecting
and displaying the main parameters such as main steam pressure, temperature, etc. It also
appraises the performance index of testing data of generator set. © 2012 IEEE.
Number of references: 7
Main heading: Distributed parameter networks
Controlled terms: Communication - Control systems - Data acquisition
Uncontrolled terms: Automatic generation control - Design and implementations Dispatching center - Main parameters - Main steam pressures - Performance
evaluation - Performance indices - Power grids - Power station - Testing data
Classification code: 703.1 Electric Networks - 716 Telecommunication; Radar, Radio and
Television - 723.2 Data Processing and Image Processing - 731.1 Control Systems
DOI: 10.1109/ICCECT.2012.184
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number: 20131016077576
Title: Fault location for distribution systems with distributed generations
Authors: Liu, Jian1 ; Zhang, Xiaoqing1 ; Tong, Xiangqian2 ; Zhang, Zhihua1 ; Du, Hongwei3 ;
Chen, Yikai1/刘健;张小庆;同向前;张志华;杜红卫;陈宜凯
Author affiliation: 1 Shaanxi Electric Power Research Institute, Xi'an 710054, China
2 School of Automation and Information Engineering, Xi'an University of Technology, Xi'an
710048, China
3 NARI Group Corporation, Nanjing 210003, China
Corresponding author: Liu, J. (powersys@263.net)
Source title: Dianli Xitong Zidonghua/Automation of Electric Power Systems
Abbreviated source title: Dianli Xitong Zidonghue
Volume: 37
Issue: 2
Issue date: January 25, 2013
Publication year: 2013
Pages: 36-42+48
Language: Chinese
ISSN: 10001026
CODEN: DXZIE9
Document type: Journal article (JA)
Publisher: Automation of Electric Power Systems Press, P.O. Box 323, Nanjing, 210003, China
Abstract: In order to solve the problem of fault location for distribution systems with
distributed generation (DG), the fault current behavior of various DGs and the short-circuit
current of the distribution systems with DGs are analyzed. The feasibility of the traditional fault
location approach based on the information of overcurrent for distribution systems with DGs is
investigated. An improved fault location process is proposed for overhead line based feeders, in
which the reclosing procedure and the escape of DGs in case of fault situation are coordinated.
Conclusions are drawn on DG connected to the bus and DG connected to the feeders based on
cables with an appropriate limit to the total capacity, the fault can be identified with the
traditional overcurrent based criteria. As for the case of DG connected to the overhead line based
feeder of a rather long distance, it is necessary to utilize the improved fault location process
proposed. © State Grid Electric Power Research Institute Press.
Number of references: 12
Main heading: Distributed power generation
Controlled terms: Electric fault location - Electric power distribution - Feeding Overhead lines
Uncontrolled terms: Current behaviors - Distributed generators - Distribution
automation - Distribution systems - Over current - Reclosing
Classification code: 691.2 Materials Handling Methods - 706.1.2 Electric Power Distribution
- 706.2 Electric Power Lines and Equipment
DOI: 10.7500/AEPS201208181
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number: 20131016090553
Title: Fast motion estimation based on the special and temporal characteristic
Authors: Liu, Long1, 2 ; Song, Qi-Jun3 ; Zhao, Tai-Fei1 ; Yuan, Xiang-Hui2/刘龙;宋琦军;赵太飞;
元向辉
Author affiliation: 1 School of Automation and Information Engineering, Xi'an University of
Technology, Xi'an 710048, China
2 School of Electronic and Information Engineering, Xi'an Jiao Tong University, Xi'an 710049,
China
3 China Electronic Systems Engineering Corporation, Beijing 100091, China
Corresponding author: Liu, L.
Source title: Tongxin Xuebao/Journal on Communications
Abbreviated source title: Tongxin Xuebao
Volume: 34
Issue: 1
Issue date: January 2013
Publication year: 2013
Pages: 121-127
Language: Chinese
ISSN: 1000436X
Document type: Journal article (JA)
Publisher: Editorial Board of Journal on Communications, No.1 Binhe Road, Hepingli,
Dongcheng District, Beijing, 1000013, China
Abstract: The spacial and temporal character of motion vector were analysed and according to
the spacial and temporal characteristic of motion vector, the different proposed search schemes
were adopted for motion estimation; The experimental results shows the proposed algorithm
reduce the prediction error and has a significant computational speedup compared with other
algorithms, but offers a similar, even better performance.
Number of references: 15
Main heading: Motion estimation
Controlled terms: Algorithms - Image coding - Image compression
Uncontrolled terms: Better performance - Block Matching - Fast motion estimation Motion Vectors - Prediction errors - Search scheme - Temporal characteristics
Classification code: 716.1 Information Theory and Signal Processing - 723 Computer
Software, Data Handling and Applications - 741 Light, Optics and Optical Devices - 921
Mathematics
DOI: 10.3969/j.issn.1000-436x.2013.01.014
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
10.
Accession number: 20131016087689
Title: Biaxial fatigue behavior under combined axial and torsional loading for S135 drill pipe
steel
Authors: Luo, She-Ji1, 2 ; Zhao, Kang1 ; Wang, Rong2/雒设计;赵康;王荣
Author affiliation: 1 School of Materials Science and Engineering, Xi'an University of
Technology, Xi'an 710048, China
2 School of Materials Science and Engineering, Xi'an Shiyou University, Xi'an 710065, China
Corresponding author: Luo, S.-J. (sjluo@xsyu.edu.cn)
Source title: Cailiao Gongcheng/Journal of Materials Engineering
Abbreviated source title: Cailiao Gongcheng
Issue: 1
Issue date: January 2013
Publication year: 2013
Pages: 40-44
Language: Chinese
ISSN: 10014381
CODEN: CAGOEW
Document type: Journal article (JA)
Publisher: Beijing Institute of Aeronautical Materials (BIAM), P.O. Box 81, Beijing, 100095, China
Abstract: Biaxial fatigue behavior under combined axial and torsional loading for S135 drill pipe
steel was investigated by means of fatigue tests and data regression analysis methods, and the
fracture surfaces were observed through scanning electron microscopy. The results show that
when τa/σeq is 0.7 the fatigue life regulation of S135 drill pipe steel under combined axial and
torsional loading can be represented well by the fatigue life equation, which is expressed by
equivalent stress of tension-torsion stress amplitude. The fracture surfaces are mainly divided
into three regions such as the crack initiation, steady crack propagation and instantaneous
fracture. Fatigue cracks mainly initiate at the specimen surface and propagate rapidly in specimen.
Fatigue cracks are multiple source and the so-called ridge patterns were formed by connecting
the different fatigue source and combined loading. The fracture surfaces are characteristic of
river patterns at crack initiation region, the fracture surfaces are characteristic of fatigue striation
and rippled patterns at crack propagation region.
Number of references: 13
Main heading: Drill pipe
Controlled terms: Crack initiation - Cracks - Fatigue crack propagation - Fatigue of
materials - Fatigue testing - Fracture - Loading - Regression analysis - Scanning
electron microscopy - Steel pipe
- Structural loads - Tensile strength
Uncontrolled terms: Axial-torsional loading - Biaxial fatigue - Combined loading Data regression - Equivalent stress - Fatigue cracks - Fatigue striations - Fracture
surfaces - In-phase - Multiple source
- Ridge patterns - River pattern Specimen surfaces - Stress amplitudes - Torsional loadings
Classification code: 741.1 Light/Optics - 672 Naval Vessels - 545.3 Steel - 922.2
Mathematical Statistics - 511.2 Oil Field Equipment - 421 Strength of Building Materials;
Mechanical Properties - 408.1 Structural Design, General - 422.2 Strength of Building
Materials : Test Methods
DOI: 10.3969/j.issn.1001-4381.2013.01.009
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
11.
Accession number: 20131016077821
Title: Experiment on salt exchange between sediments and ponding water in drainage ditches
of saline farmland
Authors: Pan, Yanxin1 ; Luo, Wan1 ; Jia, Zhonghua1 ; Li, Jin1 ; Chen, Yuan1/潘延鑫;罗纨;贾忠华;
李进;陈远
Author affiliation: 1 Northwest Key Laboratory of Water Resource and Environment Ecology,
Minstry of Education, Xi'an University of Technology, Xi'an 710048, China
Corresponding author: Luo, W. (wluo@mail.xaut.edu.cn)
Source title: Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural
Engineering
Abbreviated source title: Nongye Gongcheng Xuebao
Volume: 29
Issue: 2
Issue date: January 15, 2013
Publication year: 2013
Pages: 81-87
Language: Chinese
ISSN: 10026819
CODEN: NGOXEO
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Engineering, Agricultural Exhibition Road South,
Beijing, 100026, China
Abstract: In arid and semi-arid agricultural regions, artificial drainage is provided to maintain
salt balance of the saline farmland. As a result of poor drainage outlet in some sites, salt
accumulation in the drainage ditches often leads to salinity rising to a critical level that threatens
ecological functions of the ditch system. Periodic flushing with fresh water has been suggested to
slow down the process of salinity growth in such ditch system. But the effect of the slow moving
freshwater in drainage ditches on salt balance is unclear. In order to investigate the internal
mechanism of salt release in saline drainage ditches when freshwater is added, and to examine
the relationship of salt exchange between sediment and the overlying water under hydrostatic
condition, we conducted a laboratory study to measure spatial and temporal variations of salinity
in sediment and water interface with two experimental plexiglass columns. Each column is 15 cm
in (inner) diameter and 100 cm high. The column has a top cover to prevent the evaporation loss
of water. Sediments were filled to 30 cm thick at the bottom and covered by a freshwater layer of
65 cm. Room temperature was kept at (15±1)°C during the experiment. The sediment salinity was
measured by extracting the pore water through four sampling holes on each column wall.
Electrical conductivity of the sediment pore water and the overlying water were measured every
24 hours during the monitoring period. The sediments were taken from a saline agricultural
drainage ditches in Lubotan reclamation area in Shaanxi, China, where salinity elevation in the
drainage ditches presents a problem to the ecological functions of the ditch system, and
freshwater is available for salt flushing in the end of the irrigation season. We measured salinity
variations in water and sediments in the experimental columns continuously for a period of 648
hours, then calculated salt fluxes in the water and sediment interface based on measured
sediment properties. The monitoring data showed that there existed a linear salinity variation
zone (or the diffusion boundary layer) within 10 cm of the sediment and water interface, salinity
of water remained stable above 10 cm. The results also showed that salt diffusion within the
boundary layer slowed the salt release from the sediment, and the slowing effect increased with
the thickness of the boundary layer. Flux calculation results showed that salt fluxes released from
the sediment can be predicted with a power function, i.e., salt fluxes decreased rapidly initially
and then stabilized with time. Observed salinity change in sediment indicates that salt release
through molecular diffusion only in drainage ditches is a slow process, which may have only
limited impact on salt balance in drainage ditches when the flushing water moves slowly. And
hydrodynamic dispersion is required to speed up release of salt from the ditch sediment in order
to remove accumulated salts in the drainage ditches in saline environment.
Number of references: 26
Main heading: Sediments
Controlled terms: Boundary layers - Drainage - Ecology - Electric conductivity Experiments - Farms - Hydrodynamics - Saline water - Salinity measurement Salts
- Sedimentology - Water quality
Uncontrolled terms: 24 hours - Agricultural drainage - Column walls - Critical level
- Diffusion boundary-layers - Diffusive boundary layers - Ditch sediments - Drainage
ditches - Drainage outlet - Ecological functions
- Electrical conductivity Evaporation loss - Flux calculations - Fresh Water - Hydrodynamic dispersions Hydrostatic conditions - Laboratory studies - Molecular diffusion - Monitoring periods
- Overlying water
- Pore waters - Power functions - Reclamation areas - Room
temperature - Saline environment - Saline farmland - Salinity change - Salinity
variations - Salt accumulations - Salt balances
- Salt diffusion - Salt flux Sediment interface - Sediment pore water - Sediment properties - Semi arid Spatial and temporal variation - Speed up - Water interface
Classification code: 502 Mines and Quarry Equipment and Operations - 631.2
Hydrodynamics - 651.1 Aerodynamics, General - 701.1 Electricity: Basic Concepts and
Phenomena - 804.1 Organic Compounds - 821 Agricultural Equipment and Methods;
Vegetation and Pest Control - 901.3 Engineering Research - 483 Soil Mechanics and
Foundations - 401 Bridges and Tunnels - 406 Highway Engineering - 442 Flood Control;
Land Reclamation - 444 Water Resources - 453.2 Water Pollution Control - 454.3
Ecology and Ecosystems - 481.1 Geology
DOI: 10.3969/j.issn.1002-6819.2013.02.012
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
12.
Accession number: 20131016090376
Title: Dynamic variation of soil moisture and temperature under infiltration of low-temperature
water
Authors: Ren, Jie1, 2 ; Shen, Zhenzhong2, 3 ; Zhao, Jian3 ; Yang, Jie1/任杰;沈振中;赵坚;杨杰
Author affiliation: 1 Institute of Water Resources and Hydro-electric Engineering, Xi'an
University of Technology, Xi'an 710048, China
2 State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering, Hohai
University, Nanjing 210098, China
3 College of Water Conservancy and Hydropower Engineering, Hohai University, Nanjing
210098, China
Corresponding author: Shen, Z. (zhzhshen@hhu.edu.cn)
Source title: Shuikexue Jinzhan/Advances in Water Science
Abbreviated source title: Shuikexue Jinzhan
Volume: 24
Issue: 1
Issue date: January 2013
Publication year: 2013
Pages: 125-131
Language: Chinese
ISSN: 10016791
CODEN: SHUJE6
Document type: Journal article (JA)
Publisher: China Water Power Press, no. 1 Xikang Road, Nanjing, 210024, China
Abstract: An experimental study was conducted in an indoor soil tank, to examine
low-temperature infiltration and movement through unsaturated soil in topsoil layer of riparian
zone. Low-temperature water infiltration tests were carried out at three different heads in the
filling fine sand. Infiltration process, moisture and temperature fields were continuously
monitored and analyzed to study the impacts of the water head, the infiltration parameters, and
moisture and temperature fields. Results showed that the higher the infiltration head, the greater
is the vertical (horizontal) migration distance of the wetting front. The migration velocity of the
vertical wetting front also gradually decreased with increasing infiltration time, and becoming
more and more stability at the end. Infiltration rater had the larger fluctuations at the head of 5
cm and the settling time is greater than the head of 25 cm and 45 cm. The higher the infiltration
head, the faster is the decreasing rate of average temperature before the temperature fields
could go into a relatively steady status. At the head of 25 cm, infiltration of the low temperature
water basically reached steady status after 420 min and the head of 45 cm is after 240 min.
Number of references: 13
Main heading: Infiltration
Controlled terms: Soil moisture - Temperature - Wetting
Uncontrolled terms: Dynamic variations - Experimental studies - Fine sand Infiltration parameters - Infiltration process - Infiltration time - Low temperatures Migration distance - Migration velocity - Riparian zones
- Settling time - Soil
infiltration - Soil temperature - Steady status - Top-soil layer - Unsaturated soil Water heads - Water infiltration - Wetting fronts
Classification code: 483.1 Soils and Soil Mechanics - 641.1 Thermodynamics - 931.2
Physical Properties of Gases, Liquids and Solids
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
13.
Accession number: 20130916071043
Title: A new network security model based on machine learning
Authors: Wang, Hai-Sheng1, 2 ; Gui, Xiao-Lin1 /王海生;
Author affiliation: 1 School of Electronic and Information Engineering, Xi'an Jiaotong
University, Xi'an 710049, China
2 School of Computer Science and Technology, Xi'an University of Technology, Xi'an 710048,
China
Corresponding author: Wang, H.-S. (haisheng.wang@yahoo.cn)
Source title: Proceedings - 2012 International Conference on Control Engineering and
Communication Technology, ICCECT 2012
Abbreviated source title: Proc. - Int. Conf. Control Eng. Commun. Technol., ICCECT
Monograph title: Proceedings - 2012 International Conference on Control Engineering and
Communication Technology, ICCECT 2012
Issue date: 2012
Publication year: 2012
Pages: 860-865
Article number: 6413977
Language: English
ISBN-13: 9780769548814
Document type: Conference article (CA)
Conference name: 2012 International Conference on Control Engineering and Communication
Technology, ICCECT 2012
Conference date: December 7, 2012 - December 9, 2012
Conference location: Shenyang, Liaoning, China
Conference code: 95648
Publisher: IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC 20036-4928,
United States
Abstract: Rough set classifier or SVM (Support Vector Machine) classifier is a typical machine
learning model. The Rough set classifier and SVM classifier are used to classify nodes as trust
nodes, strange nodes and malicious nodes. We use the Rough set classifier to replace the method
by settings of the threshold. The innovation of the article is to improve the computation accuracy
and the efficiency of the classification computation by using Rough set combined with SVM
classifier. In the cases where according to the value of an attribute or the values of two attributes
the corresponding classification result can be determined, we use the Rough set classifier. In
other cases, we use SVM classifier. Compared with existing security models, experiment results
indicate that the model can obtain the higher examination rate of malicious nodes and the higher
transaction success rate. © 2012 IEEE.
Number of references: 16
Main heading: Rough set theory
Controlled terms: Communication - Computational efficiency - Computer simulation Experiments - Network security - Support vector machines
Uncontrolled terms: Classification results - Computation accuracy - Machine learning
models - Malicious nodes - Rough set - Rough set classifiers - Security model SVM classifiers - SVM(support vector machine)
Classification code: 716 Telecommunication; Radar, Radio and Television - 723 Computer
Software, Data Handling and Applications - 723.5 Computer Applications - 901.3
Engineering Research - 921 Mathematics - 921.4 Combinatorial Mathematics, Includes
Graph Theory, Set Theory
DOI: 10.1109/ICCECT.2012.28
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
14.
Accession number: 20131016090057
Title: Effect of austempering processing parameters on microstructure and hardness of nodular
cast iron dense bar
Authors: Wang, Jin-Cheng1 ; Li, Wei-Ming2 ; Zhang, Zhong-Ming1, 2 ; Xu, Chun-Jie2/王锦程;李
伟明;张忠明;徐春杰
Author affiliation: 1 State Key Laboratory of Solidification Processing, Northwestern
Polytechnical University, Xi'an 710072, China
2 School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048,
China
Corresponding author: Wang, J.-C. (jchwang@nwpu.edu.cn)
Source title: Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment
Abbreviated source title: Cailiao Rechuli Xuebao
Volume: 34
Issue: 1
Issue date: January 2013
Publication year: 2013
Pages: 70-75
Language: Chinese
ISSN: 10096264
CODEN: JRXUDO
Document type: Journal article (JA)
Publisher: Editorial Office of Transactions of Materials, 18 Xueqing Road, Beijing, 100083, China
Abstract: In order to find the optimum austempering process parameters for QT500-7 nodular
cast iron dense bar produced by horizontal continuous casting(HCC), the orthogonal experiment
was used to optimize the parameters, i. e austenitizing temperature, austenitizing time,
austempering temperature and austempering time, according to the microstructure and
hardness of the dense bar. The results show that the major factors influencing hardness of the
austempered nodular cast iron dense bar are austempering temperature and austenitizing
temperature. As the temperatures increases, the fraction of retained austenite increases and the
hardness discreases. The highest hardness of the austempered QT500-7 dense bar is obtained by
using following process parameters: austenitizing temperature and austempering temperature
are 840°C and 280°C, and austenitizing time and austempering time are 60 min and 100 min,
respectively. The microstructure of the dense bar under the optimum austempering process is
composed of thin acicular ferrite and retained austenite, and the hardness is 476 HBW.
Number of references: 13
Main heading: Nodular iron
Controlled terms: Continuous casting - Hardness - Microstructure
Uncontrolled terms: Acicular ferrite - Austempering - Austempering process Austempering temperature - Austenitizing - Austenitizing temperature - HCC Horizontal continuous casting - Major factors - Orthogonal experiment
- Orthogonal
test - Process parameters - Processing parameters - Retained austenite
Classification code: 421 Strength of Building Materials; Mechanical Properties - 534.2
Foundry Practice - 933 Solid State Physics - 951 Materials Science
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
15.
Accession number: 20131016076122
Title: An empirical research on the long-term equilibrium and short-term dynamic between
educational input and economic output in Henan Province
Authors: Wang, Li-Hui1 ; Guo, Li-Hong1 ; Liu, Zhi-Hong2/;郭立宏;
Author affiliation: 1 School of Economic and Management, Xi'an University of Technology,
710054, China
2 School of Economic, Shenyang University, 110044, China
Corresponding author: Wang, L.-H.
Source title: International Conference on Management Science and Engineering - Annual
Conference Proceedings
Abbreviated source title: Int. Conf. Manage. Sci. Eng. - Annu. Conf. Proc.
Monograph title: 2012 International Conference on Management Science and Engineering,
ICMSE 2012 - 19th Annual Conference Proceedings
Issue date: 2012
Publication year: 2012
Pages: 1874-1882
Article number: 6414427
Language: English
ISSN: 21551847
ISBN-13: 9781467330145
Document type: Conference article (CA)
Conference name: 2012 19th Annual International Conference on Management Science and
Engineering, ICMSE 2012
Conference date: September 20, 2012 - September 22, 2012
Conference location: Dallas, TX, United states
Conference code: 95652
Sponsor: National Natural Science Foundation of China; Harbin Institute of Technology
Publisher: IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC 20036-4928,
United States
Abstract: Using the sample data from 1952 to 2011 years to study the dynamic correlation
between educational input and economic output by the multivariate auto regression model, and
on this basis, it conducts a systematic analysis of the interaction mechanisms between factors of
education input and economic output by using co-integration theory and error correction model.
Conclusion indicates that: there is not only a long-term stable equilibrium relationship between
educational investment and economic output, but also has a short-term dynamic relationship. In
the long term, the output elasticity which educational investment and educational infrastructure
construction on economic output is the most significant, respectively 1.112 and 1.313; in the
short term, the response coefficient which economic output on educational investment and
college students is positive, respectively 0.492 and 0.208. © 2012 IEEE.
Number of references: 22
Main heading: Investments
Controlled terms: Data integration - Education computing - Elasticity - Error
correction - Management science - Regression analysis - Students
Uncontrolled terms: Cointegration - Economic output - educational input - Error
correction models - Multivariate regression models
Classification code: 912.4 Personnel - 912.2 Management - 911.2 Industrial Economics
- 922.2 Mathematical Statistics - 723.2 Data Processing and Image Processing - 422
Strength of Building Materials; Test Equipment and Methods - 421 Strength of Building
Materials; Mechanical Properties - 721.1 Computer Theory, Includes Formal Logic, Automata
Theory, Switching Theory, Programming Theory
DOI: 10.1109/ICMSE.2012.6414427
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
16.
Accession number: 20131016077806
Title: Effects comparison of seeds germinating treated by extremely low frequency PEF and
HVEF
Authors: Xi, Gang1 ; Liu, Kai1 ; Xu, Yongkui2 ; Gao, Yu1/习岗;刘锴;徐永奎;高宇
Author affiliation: 1 Department of Applied Physics, Institute of Science, Xian University of
Technology, Xi'an, 710048, China
2 Department of Physics, Fudan University, Shanghai, 200433, China
Corresponding author: Xi, G. (xig@xaut.edu.cn)
Source title: Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural
Engineering
Abbreviated source title: Nongye Gongcheng Xuebao
Volume: 29
Issue: 1
Issue date: January 1, 2013
Publication year: 2013
Pages: 265-271
Language: Chinese
ISSN: 10026819
CODEN: NGOXEO
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Engineering, Agricultural Exhibition Road South,
Beijing, 100026, China
Abstract: The effect of electric field on crop seeds is one of the popular issues in electric field
biological effects. Previous studies were focused in high voltage electrostatic field (HVEF), few
researches on pulsed electric field (PEF). In this study the germinating mung beans were treated
in extremely low frequency PEF with 1 Hz and HVEF, and their growth indicators such as fresh
quality, shoot length and root length, and associated physiological variables such as spontaneous
luminescence, soluble protein content, the activity of superoxide dismutase (SOD) and
peroxidase (POD) were investigated. The results showed that fresh quality, shoot length and root
length of germinating mung beans treated in PEF with 1 Hz were significantly promoted, while
the effect of HVEF with the same strength was not obvious. The mechanism study indicated that
the PEF and HVEF had some influences on oxidative and protein metabolism of germinating
mung beans, and decomposition of storage protein in the initial stage of germination and
synthesis of new protein in later stage of germination were promoted by the PEF, while HVEF
promoted the synthesis of protein in later stage of germination. The study also found that the
PEF and HVEF can activate SOD induced by superoxide anion free radical and promote the
synthesis of POD. The cause of the difference about effect of extremely low frequency PEF and
HVEF on germinating crop seeds was also discussed in this paper. It is concluded that same
intensity extremely low frequency pulsed electric field (PEF) with 1 Hz and HVEF can promote
crop seed germination and growth of the crop, however, the PEF with 1 Hz is more effective than
HVEF.
Number of references: 22
Main heading: Seed
Controlled terms: Crops - Cultivation - Electric fields - Experiments - Free radicals
- Oxygen - Proteins
Uncontrolled terms: Biological effects - Difference of germination - Extremely low
frequencies - High voltage electrostatic field - Initial stages - Mechanism studies Mungbeans - Oxidative metabolism - Peroxidase (POD) - Protein metabolism
Pulsed electric field - Root length - Seed germination - Shoot length - Soluble
proteins - Storage proteins - Superoxide anions - Superoxide dismutases
Classification code: 701.1 Electricity: Basic Concepts and Phenomena - 804 Chemical
Products Generally - 804.1 Organic Compounds - 821.3 Agricultural Methods - 821.4
Agricultural Products - 901.3 Engineering Research
DOI: 10.3969/j.issn.1002-6819.2013.01.035
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
17.
Accession number: 20131016077611
Title: Biological effects of pulsed electric field based on potential fluctuations in maize seedlings
Authors: Xi, Gang1 ; Liu, Kai1 ; Yang, Yunjing2 ; Gao, Yu1/习岗;刘锴;杨运经;高宇
Author affiliation: 1 School of Science, Xi'an University of Technology, Xi'an 710048, China
2 School of Science, Northwest Agriculture and Forestry University, Yangling 712100, China
Corresponding author: Xi, G. (xig@xaut.edu.cn)
Source title: Gaodianya Jishu/High Voltage Engineering
Abbreviated source title: Gaodianya Jishu
Volume: 39
Issue: 1
Issue date: January 2013
Publication year: 2013
Pages: 129-134
Language: Chinese
ISSN: 10036520
CODEN: GAJIE5
Document type: Journal article (JA)
Publisher: Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China
Abstract: In order to obtain remarkable electric field biological effect on crop seeds, the basic
characteristics of natural potential fluctuations in maize seedlings were studied by analyzing the
wavelet de-noising and power spectrum. The results showed that the power spectrum of natural
potential fluctuations in maize seedlings was mainly distributed in 0~1 Hz with a gravity
frequency of 0.2 Hz. Based on the potential fluctuation characteristics, extremely low frequency
pulsed electric field of 100 kV/m and 0.2 Hz was used to treat germinating maize seeds. It was
found that the seed germination process was significantly promoted: on the 5th day of
germination, the fresh mass, shoot length and root length of germinating maize seed respectively
increased by 17.55%, 60.13% and 28.50% compared with those of the control group. Analysis
results of ultraweak luminescence(UL) changes in the geminating seeds showed that the
ultraweak luminescence was promoted by the pulsed electric field: the spontaneous
luminescence and the integrated intensity of delayed luminescence of the germinating maize
seed respectively increased by 68.84% and 33.93% compared with those of the control group on
the 5th day of germination. The promotion implied that the 0.2 Hz extremely low frequency
pulsed electric field accelerated the DNA synthesis reaction and cell metabolism of the
germinating seeds. It is concluded that the coupled resonance between pulsed electric field and
plant natural potential may be the cause of the extremely low frequency pulsed electric field's
biological effects.
Number of references: 21
Main heading: Seed
Controlled terms: Cultivation - Electric fields - Luminescence - Power spectrum Synthesis (chemical)
Uncontrolled terms: Biological effects - Coupled resonance - Maize - Plant potentials
- Pulsed electric field - Ultraweak luminescence
Classification code: 921 Mathematics - 821.4 Agricultural Products - 821.3 Agricultural
Methods - 941 Acoustical and Optical Measuring Instruments - 802.2 Chemical Reactions
- 711 Electromagnetic Waves - 701.1 Electricity: Basic Concepts and Phenomena - 741.1
Light/Optics
DOI: 10.3969/j.issn.1003-6520.2013.01.019
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
18.
Accession number: 20131016090448
Title: Growth process of tantalum capacitor oxide film for 0603 size
Authors: Xu, Yunfei1 ; Li, Chunguang1, 2 ; An, Tao1 ; Wu, Hua2/徐云飞;李春光;安涛;吴华
Author affiliation: 1 Xi'an University of Technology, Xi'an 710048, China
2 Ningxia Xingri Electronics Co. Ltd., Yinchuan 750011, China
Corresponding author: Xu, Y. (yddxuyunfei@163.com)
Source title: Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering
Abbreviated source title: Xiyou Jinshu Cailiao Yu Gongcheng
Volume: 42
Issue: 1
Issue date: January 2013
Publication year: 2013
Pages: 190-193
Language: Chinese
ISSN: 1002185X
CODEN: XJCGEA
Document type: Journal article (JA)
Publisher: Rare Metals Materials and Engineering Press, P.O. Box 51, Xi'an, 721014, China
Abstract: The growth process of tantalum capacitor oxide film for 0603 size was investigated.
The main process parameters of dielectric film Ta2O5 quality including formation fluid type,
formation liquid concentration, current density and constant voltage time were employed to
carry out experiments. At last DC leakage current of wet measure was collected, and through
comparative experiments the best process parameters of the oxidation film growth were
obtained. In conclusion, the best process parameters are 0.2% (volume ratio) nitric acid solution,
40 mA/g current density and 5 h constant voltage time. Through the best process parameters, the
oxidation film quality can be improved greatly. Finally, leakage current is very small and comes to
0.036 μA. Copyright © 2013, Northwest Institute for Nonferrous Metal Research. Published by
Elsevier BV. All rights reserved.
Number of references: 15
Main heading: Tantalum
Controlled terms: Capacitors - Current density - Dielectric films - Experiments Film growth - Nitric acid - Oxide films - Tantalum oxides
Uncontrolled terms: Comparative experiments - Constant voltage - DC leakage current
- Formation fluids - Growth process - Liquid concentration - Main process - Nitric
acid solutions - Oxidation film - Process parameters
- Tantalum capacitors Volume ratio
Classification code: 901.3 Engineering Research - 804.2 Inorganic Compounds - 804
Chemical Products Generally - 712.1.2 Compound Semiconducting Materials - 712.1
Semiconducting Materials - 708.1 Dielectric Materials - 704.1 Electric Components 701.1 Electricity: Basic Concepts and Phenomena - 543.4 Tantalum and Alloys
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
19.
Accession number: 20131016076110
Title: A study on measuring urbanization process drag from urban-rural digital divide in China
Authors: Xue, Wei-Xian1 ; Liu, Jun1/薛伟贤;刘军
Author affiliation: 1 School of Economics and Management, Xi'an University of Technology,
710054, China
Corresponding author: Xue, W.-X.
Source title: International Conference on Management Science and Engineering - Annual
Conference Proceedings
Abbreviated source title: Int. Conf. Manage. Sci. Eng. - Annu. Conf. Proc.
Monograph title: 2012 International Conference on Management Science and Engineering,
ICMSE 2012 - 19th Annual Conference Proceedings
Issue date: 2012
Publication year: 2012
Pages: 1794-1799
Article number: 6414415
Language: English
ISSN: 21551847
ISBN-13: 9781467330145
Document type: Conference article (CA)
Conference name: 2012 19th Annual International Conference on Management Science and
Engineering, ICMSE 2012
Conference date: September 20, 2012 - September 22, 2012
Conference location: Dallas, TX, United states
Conference code: 95652
Sponsor: National Natural Science Foundation of China; Harbin Institute of Technology
Publisher: IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC 20036-4928,
United States
Abstract: Informatization is a great motivity to urbanization, but urbanization process is
seriously cumbered by urban-rural digital divide in China. Romer's theory of economy growth
drag is used for reference, and non-linear regression is applied to build a model of measuring the
urbanization process drag from China's urban-rural digital divide. As a research result, the
formula of measuring drag is deduced. The China's urbanization process drag is determined not
only by urban-rural digital divide but also by industry structure, population diathesis and life
quality. It implies that the urbanization process drag from China's urban-rural digital divide is not
an oversimplified problem of information technology permeation, but a complicated
socioeconomic problem. This study can help government to make some systemic measures to
use informatization to drive urbanization process. © 2012 IEEE.
Number of references: 21
Main heading: Economic and social effects
Controlled terms: Drag - Economics - Information technology - Management science
Uncontrolled terms: Digital divide - Economy growth - Industry structures Informatization - Life qualities - Non-linear regression - Research results Socio-economic problems - Urban-rural - urbanization process
Classification code: 651.1 Aerodynamics, General - 903 Information Science - 912.2
Management - 971 Social Sciences
DOI: 10.1109/ICMSE.2012.6414415
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
20.
Accession number: 20131016076097
Title: Industry regulation's effect on the enterprise performance: From the evidence of CPL
Authors: Yang, Yi1 ; Lin, Yan-Duo1 ; Wang, De-Long2/杨屹;;
Author affiliation: 1 School of Economics and Management, Xi' an University of Technology,
710048, China
2 CNPC Logging Co., 710021, China
Corresponding author: Yang, Y.
Source title: International Conference on Management Science and Engineering - Annual
Conference Proceedings
Abbreviated source title: Int. Conf. Manage. Sci. Eng. - Annu. Conf. Proc.
Monograph title: 2012 International Conference on Management Science and Engineering,
ICMSE 2012 - 19th Annual Conference Proceedings
Issue date: 2012
Publication year: 2012
Pages: 1705-1712
Article number: 6414402
Language: English
ISSN: 21551847
ISBN-13: 9781467330145
Document type: Conference article (CA)
Conference name: 2012 19th Annual International Conference on Management Science and
Engineering, ICMSE 2012
Conference date: September 20, 2012 - September 22, 2012
Conference location: Dallas, TX, United states
Conference code: 95652
Sponsor: National Natural Science Foundation of China; Harbin Institute of Technology
Publisher: IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC 20036-4928,
United States
Abstract: In the context of petroleum industry regulation policy and constantly change of
enterprise external environment, transmission mechanism of industry regulation's effect on
petroleum enterprise is taken as an entry point. Based on the financial indicators which are
commonly used in enterprise performance evaluation, evaluation index system of petroleum
enterprise is constructed combined with nonfinancial indicators which transmission mechanism
reflects, and the key index factors are filtered by using the principal component analysis method.
The enterprise performance under industry regulation is evaluated by using the related data of
CPL enterprise in the period from 2002 to 2007. Research shows that financial performance
presents volatility in the short term, yet in the long term, enterprise core ability will be promoted.
The result indicates that industry regulation affects the level of enterprise performance by the
direct transmitting of enterprise behavior and indirectly transmitting of market structure. © 2012
IEEE.
Number of references: 23
Main heading: Industry
Controlled terms: Management science - Petroleum industry - Principal component
analysis
Uncontrolled terms: Enterprise performance - evaluation - Industry regulations Petroleum enterprise - transfer analysis
Classification code: 913 Production Planning and Control; Manufacturing - 912.2
Management - 912 Industrial Engineering and Management - 922.2 Mathematical
Statistics - 911 Cost and Value Engineering; Industrial Economics - 512 Petroleum and
Related Deposits - 511 Oil Field Equipment and Production Operations - 513 Petroleum
Refining
DOI: 10.1109/ICMSE.2012.6414402
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
21.
Accession number: 20131016090365
Title: An assessment of the effectiveness of vegetated filter strips for Heihe River headwaters
area using numerical simulation
Authors: Yang, Yinqun1, 2 ; Li, Huaien2 ; Yang, Fangshe3/杨寅群;李怀恩;杨方社
Author affiliation: 1 School of Resource and Environmental Science, Wuhan University,
Wuhan 430079, China
2 Northwest Key Laboratory of Water Resources and Environment Ecology, Ministry of
Education, Xi'an University of Technology, Xi'an 710048, China
3 College of Urban and Environmental Science, Northwest University, Xi'an 710069, China
Corresponding author: Li, H. (huaienl@yahoo.com)
Source title: Shuikexue Jinzhan/Advances in Water Science
Abbreviated source title: Shuikexue Jinzhan
Volume: 24
Issue: 1
Issue date: January 2013
Publication year: 2013
Pages: 42-48
Language: Chinese
ISSN: 10016791
CODEN: SHUJE6
Document type: Journal article (JA)
Publisher: China Water Power Press, no. 1 Xikang Road, Nanjing, 210024, China
Abstract: In order to investigate the feasibility of using numerical simulation to assessing the
effectiveness of vegetative filter strips (VFS), the vegetative filter strip hydrology and sediment
transport model (VFSMOD) is applied to the Heihe River headwaters area. The effect of VFS'
width and slop on the removal rate of sediments is estimated by VFSMOD, and the appropriate
design is subsequently determined for a VFS system. The VFS effectiveness for the load reduction
of nonpoint source pollution in a watershed is assessed with the linear relationship between the
sum of total phosphorus (TP) and total nitrogen (TN), and sediments. The results show that a
grass filter strip with width in the range of 3-5 m is advisable and the slop gradient should be less
than 60. The reduction of sediments, TP and TN would be 21.7%, 12.4% and 14.3%, respectively,
after the installation of VFSs on all sensitive riparian zones of the Heihe River headwaters area.
The study demonstrates that VFS can play an important role in the water quality control for the
Heihe River headwaters area.
Number of references: 23
Main heading: Water pollution
Controlled terms: Computer simulation - Numerical models - Sediment transport Sedimentology - Water quality
Uncontrolled terms: Appropriate designs - Grass filter strip - Heihe river - Linear
relationships - Load reduction - Non-point source pollution - Removal rate -
Riparian zones - Sediment transport model - Total nitrogen
- Total phosphorus Vegetated filter strips - Vegetative filter strips
Classification code: 453 Water Pollution - 453.2 Water Pollution Control - 481.1 Geology
- 631.3 Flow of Fluid-Like Materials - 723.5 Computer Applications - 921 Mathematics
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
22.
Accession number: 20131016086605
Title: Dynamic modeling and analysis of an elastic mechanism with a nonlinear damping model
Authors: Yuan, Da-Ning1/原大宁
Author affiliation: 1 Mechanical and Precision Instrument Engineering Department, Xi'An
University of Technology, Xi'an, China
Corresponding author: Yuan, D.-N. (daningyuan@163.com)
Source title: JVC/Journal of Vibration and Control
Abbreviated source title: JVC/J Vib Control
Volume: 19
Issue: 4
Issue date: March 2013
Publication year: 2013
Pages: 508-516
Language: English
ISSN: 10775463
E-ISSN: 17412986
CODEN: JVCOFX
Document type: Journal article (JA)
Publisher: SAGE Publications Inc., 2455 Teller Road, Thousand Oaks, CA 91320, United States
Abstract: Dynamic modeling and simulation of a mechanical system with nonlinear
strain-frequency-dependent damping are carried out in this paper. First, methods of nonlinear
strain-frequency-dependent damping are described, which extracts nonlinear damping
information of a damping alloy specimen from the free decay signal by means of the moving
autoregressive model method. Second, the viscoelastic theory is introduced to describe the
strain-frequency-dependent characteristics of damping more accurately, a viscoelastic three
parameter structural damping constitution model is developed whose parameters are identified
from the test data by means of an optimization algorithm. The finite element dynamic equations
for strain-frequency-dependent damping are derived through the established three parameters
constitution. Thirdly, the established element dynamic equations are assembled into the system
dynamic equations of an elastic linkage mechanism by means of the kineto-elastodynamic theory,
and a closed-form numerical algorithm is constructed in order to solve the high-order differential
equations with time-varying coefficients. Lastly, a dynamic simulation example of a four-bar
elastic linkage mechanism with damping alloy components is given. It is shown that the elastic
vibration can be significantly reduced with the components replaced by damping alloy parts. ©
2012 The Author(s).
Number of references: 19
Main heading: Damping
Controlled terms: Algorithms - Alloys - Computer simulation - Differential equations
- Dynamic analysis - Dynamics - Elasticity - Finite element method
Uncontrolled terms: Auto regressive models - Closed form - Damping alloy Dynamic equations - Dynamic modeling and simulation - Elastic linkage mechanism Elastic mechanism - Elastic vibration - Finite Element - Four bar
- Free decay High-order - Kineto-elastodynamic - Mechanical systems - Modeling and analysis Nonlinear damping - Numerical algorithms - Optimization algorithms - Structural
damping - System Dynamics
- Test data - Three parameters - Time-varying
coefficient - Viscoelastic damping - Viscoelastic theory
Classification code: 422.2 Strength of Building Materials : Test Methods - 531.1 Metallurgy
- 723 Computer Software, Data Handling and Applications - 723.5 Computer Applications
- 921 Mathematics - 931.1 Mechanics
DOI: 10.1177/1077546309356463
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
23.
Accession number: 20131016077879
Title: Finite element numerical simulation and control parameter of czochralski silicon
monocrystal during shoulder growth process
Authors: Zhang, Jing1 ; Liu, Ding1 ; Zhao, Yue1 ; Jiao, Shang-Bin1/张璟;刘丁;赵悦;焦尚彬
Author affiliation: 1 School of Automation and Information Engineering, Xi'an University of
Technology, Xi'an 710048, China
Corresponding author: Zhang, J. (weeine@gmail.com)
Source title: Rengong Jingti Xuebao/Journal of Synthetic Crystals
Abbreviated source title: Rengong Jingti Xuebao
Volume: 42
Issue: 1
Issue date: January 2013
Publication year: 2013
Pages: 58-64
Language: Chinese
ISSN: 1000985X
CODEN: RJXUEN
Document type: Journal article (JA)
Publisher: Chinese Ceramic Society, Baiwanzhuang, Beijing, 100831, China
Abstract: Both formation of a dislocation free crystal nucleus and abilitity to entrance to body
growth during crowning growth are cruxes of Cz-Si monocrystal growth. It often shows
dislocation happened after an unknown flow on melt surface cutting in crystal in the process of
crowning growth in practice. In the paper, crystal rotation process is proposed at the beginning of
crowning growth. Melt convection and temperature distribution are calculated by finite element
numerical simulation. Flow rate variation near the solid-liquid interface melt surface and
explanation the formation of the flow are given. Simulation and experiment results show the
effectiveness for the proposed method.
Number of references: 15
Main heading: Computer simulation
Controlled terms: Crystal cutting - Crystal orientation - Dislocations (crystals) Plastic deformation - Silicon
Uncontrolled terms: Control parameters - Crystal rotations - Czochralski silicon Dislocation free crystals - Finite element numerical simulation - Growth process - Melt
convection - Melt surfaces - Monocrystal - Monocrystal growth
- Rate variation
- Solid-liquid interfaces
Classification code: 421 Strength of Building Materials; Mechanical Properties - 482.2.1
Gems - 712.1.1 Single Element Semiconducting Materials - 723.5 Computer Applications
- 933.1.1 Crystal Lattice
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
24.
Accession number: 20131016077512
Title: Analysis of leakage characteristics of finger seal based on system responses
Authors: Zhang, Yan-Chao1 ; Liu, Kai1 ; Zhou, Lian-Jie2 ; Hu, Hai-Tao2/张延超;刘凯;周连杰;胡
海涛
Author affiliation: 1 School of Mechanical Instrumental Engineering, Xi'an University of
Technology, Xi'an 710048, China
2 The Research Laboratory of Mechanical System, China Gas Turbine Establishment, Aviation
Industry Corporation of China, Chengdu 610500, China
Corresponding author: Zhang, Y.-C.
Source title: Hangkong Dongli Xuebao/Journal of Aerospace Power
Abbreviated source title: Hangkong Dongli Xuebao
Volume: 28
Issue: 1
Issue date: January 2013
Publication year: 2013
Pages: 205-210
Language: Chinese
ISSN: 10008055
CODEN: HDOXE5
Document type: Journal article (JA)
Publisher: BUAA Press, Xue-Yuan Road No.37, Beijing, 100083, China
Abstract: The current work obtained the seal rotor displacement excitation through studying
the association rules of rotor speed, rotor unbalanced force and rotor runout based on dynamic
working characteristics of finger seal. Then, a dynamic computational model of finger seal system
was constructed. The leakage clearance computation method was researched according to the
dynamic displacement response characteristics from the constructed model. Then the dynamic
leakage calculation method was constructed and the leakage analysis work was conducted. The
results preliminarily shows that dynamic displacement response changes with the rotor
excitation time in every rotation period. The dynamic leakage clearance produced by dynamic
displacement response also changes with the rotor excitation time. The results also indicate that
leakage numerical size is affected by working conditions, installation conditions and the abrasion
degree of finger boots. The method was validated by the computational example of a special
engine and the comparison of calculating results and test data in references. The research work
can provide valuable reference for dynamic performances design and study of finger seal.
Number of references: 15
Main heading: Seals
Controlled terms: Computational methods - Hysteresis
Uncontrolled terms: Computation methods - Computational model - Displacement
response - Dynamic displacements - Dynamic performance - Finger seal - Leakage
analysis - ON dynamics - Rotation period - Rotor displacement
- Rotor excitations
- Rotor speed - Run outs - System response - Test data in - Unbalanced force
Classification code: 619.1.1 Pipe Accessories - 921 Mathematics - 961 Systems Science
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
25.
Accession number: 20131016090202
Title: Application of the POSS/polymer organic-inorganic hybrids
Authors: Zhang, Zengping1 ; Liang, Guozheng2 ; Pei, Jianzhong1 ; Fang, Changqing3/张增平;梁
国正;裴建忠;方长青
Author affiliation: 1 Key Laboratory for Special Area Highway Engineering of Ministry of
Education, School of Highway, Chang'an University, Xi'an 710064, China
2 Department of Polymer Engineering, Institute of Materials Engineering, Soochow University,
Suzhou 215021, China
3 Institute of Printing and Packing Engineering, Xi'an University of Technology, Xi'an 710048,
China
Corresponding author: Zhang, Z. (zhangzp99@yahoo.com.cn)
Source title: Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and
Engineering
Abbreviated source title: Gaofenzi Cailiao Kexue Yu Gongcheng
Volume: 29
Issue: 1
Issue date: January 2013
Publication year: 2013
Pages: 187-190
Language: Chinese
ISSN: 10007555
CODEN: GCKGEI
Document type: Journal article (JA)
Publisher: Chengdu University of Science and Technology, 24 South Section 1, Yihuan Rd.,
Chengdu, 610065, China
Abstract: Recently, POSS/polymer organic-inorganic hybrid materials have became the hot topic
in the area of materials science, such as high-temperature resistant and insulating materials, low
dielectric constant materials, sensors, optical components materials and catalysts carriers. The
recent development of the application of these materials in the fields such as aero-astro, thermal
resistance and flame retardancy, high-performance dielectric materials, porous functional
materials, catalysts, ceramics precursors, nanocomposites and pharmaceutical materials was
reviewed. Finally, it is pointed out that the synthesis of POSS compounds is key factor to restrict
the deeply research and wide application of POSS/polymer hybrids.
Number of references: 27
Main heading: Dielectric materials
Controlled terms: Applications - Catalysts - Functional materials - Hybrid materials
- Oligomers
Uncontrolled terms: Flame retardancy - High-temperature resistant - Hot topics Key factors - Low dielectric constant materials - Optical components Organic-inorganic hybrid - Organic-inorganic hybrid materials - Pharmaceutical materials
- Polyhedral oligomeric silsesquioxanes
Classification code: 933 Solid State Physics - 804 Chemical Products Generally - 803
Chemical Agents and Basic Industrial Chemicals - 951 Materials Science - 712 Electronic
and Thermionic Materials - 451.2 Air Pollution Control - 415 Metals, Plastics, Wood and
Other Structural Materials - 708.1 Dielectric Materials
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
2013-03-23 新增 2 条
1.
Accession number: 20131116115660
Title: Integral type multi-ramp for single-slope ADC
Authors: Lyu, Nan1 ; Yu, Ning Mei1 ; Zhang, He Jiu1/;余宁梅;
Author affiliation: 1 Faculty of Automation and Information Engineering, Xi'an University of
Technology, Xi'an, China
Corresponding author: Lyn, N. (sheng_xing@yeah.net)
Source title: Applied Mechanics and Materials
Abbreviated source title: Appl. Mech. Mater.
Volume: 303-306
Monograph title: Sensors, Measurement and Intelligent Materials
Issue date: 2013
Publication year: 2013
Pages: 1908-1912
Language: English
ISSN: 16609336
E-ISSN: 16627482
ISBN-13: 9783037856529
Document type: Conference article (CA)
Conference name: 2012 International Conference on Sensors, Measurement and Intelligent
Materials, ICSMIM 2012
Conference date: December 26, 2012 - December 27, 2012
Conference location: Guilin, China
Conference code: 95893
Publisher: Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany
Abstract: This paper presents a integral type Multi-ramp architecture apply to MRSS ADC
(Multiple-ramp single-slope ADC).On the one hand to improve the capacitance mismatch by
change voltage reference, On the other hand to reduced the power consumption greatly.
Implemented in the GSMC 180nm 2P4M CMOS process, in the power supply voltage of 1.8 V,
11-bit resolution, 10 MHZ sampling frequency, the result of max power consumption is 1.33mW
of single unit.The DNL < 0.1LSB and max INL < 0.49LSB.The Multi-ramp achieved requirements for
high speed and high accuracy MRSS ADC. © (2013) Trans Tech Publications, Switzerland.
Number of references: 8
Main heading: Sensors
Controlled terms: CMOS integrated circuits - Intelligent materials
Uncontrolled terms: CMOS image sensor - CMOS processs - High Speed - Intrinsic
accuracy - MRSS ADC - Power supply voltage - Sampling frequencies - Single-slope
ADC - Voltage reference
Classification code: 415 Metals, Plastics, Wood and Other Structural Materials - 714.2
Semiconductor Devices and Integrated Circuits - 801 Chemistry
DOI: 10.4028/www.scientific.net/AMM.303-306.1908
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number: 20131116105356
Title: Human action recognition with topic-relative conditional random field model
Authors: Zhang, Erhu1 ; Zhao, Yongwei1/张二虎;赵永伟
Author affiliation: 1 Department of Information Science, Xi'An University of Technology, Xi'an,
China
Corresponding author: Zhang, E. (eh-zhang@xaut.edu.cn)
Source title: 2012 IEEE 5th International Conference on Advanced Computational Intelligence,
ICACI 2012
Abbreviated source title: IEEE Int. Conf. Adv. Comput. Intell., ICACI
Monograph title: 2012 IEEE 5th International Conference on Advanced Computational
Intelligence, ICACI 2012
Issue date: 2012
Publication year: 2012
Pages: 615-619
Article number: 6463239
Language: English
ISBN-13: 9781467317436
Document type: Conference article (CA)
Conference name: 2012 IEEE 5th International Conference on Advanced Computational
Intelligence, ICACI 2012
Conference date: October 18, 2012 - October 20, 2012
Conference location: Nanjing, China
Conference code: 95872
Sponsor: IEEE Nanjing Section
Publisher: IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC 20036-4928,
United States
Abstract: Human action recognition is a challenging filed in computer vision. In this paper, a
novel probabilistic graphical model, called topic-relative conditional random field(TCRF), is firstly
proposed. The model is constructed by adding a topic node and using a triangular-chain structure
in the top layer of the linear-chain conditional random field(LCRF) to overcome the drawback of
independent and identical distribution in LCRF. Then, we define a dynamic region for each action
and the discriminative features are extracted by using a hierarchical energy method. Lastly, two
popular probabilistic graphical models, HMM and LCRF, and the proposed TCRF model are
evaluated on our database, the experimental results show the effectiveness of the proposed
method. © 2012 IEEE.
Number of references: 23
Main heading: Random processes
Controlled terms: Artificial intelligence - Gesture recognition - Speech recognition
Uncontrolled terms: Conditional random field - Discriminative features - Dynamic region
- Energy method - Human-action recognition - Probabilistic graphical models - Top
layers
Classification code: 716 Telecommunication; Radar, Radio and Television - 723.4 Artificial
Intelligence - 723.5 Computer Applications - 922.1 Probability Theory
DOI: 10.1109/ICACI.2012.6463239
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
20130329 新增 11 条
1.
Accession number: 20131216133819
Title: An anti-counterfeiting method for printed image by digital halftoning method
Authors: Duan, Jinghong1 ; Zhang, Erhu2/段敬红;张二虎
Author affiliation: 1 School of Computer Science and Engineering, Xi'An University of
Technology, Xi'an, China
2 Department of Information Science, Xi'An University of Technology, Xi'an, China
Corresponding author: Duan, J.
Source title: 2012 5th International Congress on Image and Signal Processing, CISP 2012
Abbreviated source title: Int. Congr. Image Signal Process., CISP
Monograph title: 2012 5th International Congress on Image and Signal Processing, CISP 2012
Issue date: 2012
Publication year: 2012
Pages: 562-566
Article number: 6469758
Language: English
ISBN-13: 9781467309622
Document type: Conference article (CA)
Conference name: 2012 5th International Congress on Image and Signal Processing, CISP 2012
Conference date: October 16, 2012 - October 18, 2012
Conference location: Chongqing, China
Conference code: 96020
Publisher: IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC 20036-4928,
United States
Abstract: Anti-counterfeiting technology has been widely used in many fields, especially in
printing industry for banknotes and security documents. This paper introduces an
anti-counterfeiting method with varied screening angle and gives the realization procedure of
this method. Firstly, the continuous-tone cover image is halftoned by ordered dithering
halftoning method with 0o and 45o screening angle, respectively. Then, a binary figurative image
which represents the hidden information is generated by using Photoshop software for serving as
a mask image. Finally, the latent image is generated by combining the two halftoning images with
different screening angle according to the figurative image. The diagonal edge detector is
designed for extracting the hidden information. The experimental result shows that the proposed
method can better generate the desired latent image and the hiding message can easily be
exposed by the simply image processing method. © 2012 IEEE.
Number of references: 8
Main heading: Image processing
Controlled terms: Electrical engineering - Signal processing
Uncontrolled terms: Anti-counterfeiting - Digital halftoning - Digital halftoning methods
- Halftoning methods - Hidden information - Image processing - methods - line
screen - Security documents
Classification code: 709 Electrical Engineering, General - 716.1 Information Theory and
Signal Processing - 741 Light, Optics and Optical Devices
DOI: 10.1109/CISP.2012.6469758
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number: 20131216133982
Title: A novel watermarking schem using directionlet
Authors: He, Wenjuan1 ; Liu, Jing1 ; Duan, Jinghong1 ; Wang, Jingyi2/何文娟;刘晶;段敬红;;
Author affiliation: 1 Faculty of Computer Science and Engineering, Xi'An University of
Technology, Xi'an, China
2 Engineering Training Center, Xi'An University of Technology, Xi'an, China
Corresponding author: He, W.
Source title: 2012 5th International Congress on Image and Signal Processing, CISP 2012
Abbreviated source title: Int. Congr. Image Signal Process., CISP
Monograph title: 2012 5th International Congress on Image and Signal Processing, CISP 2012
Issue date: 2012
Publication year: 2012
Pages: 557-561
Article number: 6469921
Language: English
ISBN-13: 9781467309622
Document type: Conference article (CA)
Conference name: 2012 5th International Congress on Image and Signal Processing, CISP 2012
Conference date: October 16, 2012 - October 18, 2012
Conference location: Chongqing, China
Conference code: 96020
Publisher: IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC 20036-4928,
United States
Abstract: In this paper, a new robust digital image watermarking algorithm is proposed in
Directionlet transform domain. Directionlet transform (DT) is able to capture the directional
edges and contours superior to many multi-resolution geometric analysis (MGA) tools. At first,
sample the original image with the generator matrix; Then, decompose each coset into the
subbands with directionlet transform. For embedding watermark bits, We select a M×M
coefficients from the middle frequency domain of all the cosets of the lattice, as many as bits of
the binary watermark image. The experimental results show that the proposed algorithm has a
good resistance against to common attacks,moreover it outperforms previous methods in the
most situations. © 2012 IEEE.
Number of references: 11
Main heading: Image watermarking
Controlled terms: Mathematical transformations - Signal processing - Watermarking
Uncontrolled terms: Binary watermarks - Digital image watermarking algorithms Directionlet transform - Embedding watermarks - Frequency domains - Generator
matrix - Geometric analysis - Multi-resolutions
Classification code: 716.1 Information Theory and Signal Processing - 723.2 Data Processing
and Image Processing - 811.1.1 Papermaking Processes - 921.3 Mathematical
Transformations
DOI: 10.1109/CISP.2012.6469921
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number: 20131116123469
Title: The application of SWMM model based on GIS in the piedmont rain control: A case study
in Beiwucun gravel pit of Beijing, China
Authors: Li, Wu-Qing1, 2 ; Kong, Gang1, 3 ; Huang, Qiang1 ; Chen, Jian-Gang2/;;黄强;
Author affiliation: 1 Xi'an University of Technology, Xi'an, China
2 Beijing Municipal Commission of Development and Reform, Beijing, China
3 Beijing Hydraulic Research Institute, Beijing, China
Corresponding author: Li, W.-Q.
Source title: Hydraulic Engineering - Proceedings of the 2012 SREE Conference on Hydraulic
Engineering, CHE 2012 and 2nd SREE Workshop on Environment and Safety Engineering, WESE
2012
Abbreviated source title: Hydraul. Eng. - Proc. SREE Conf. Hydraul. Eng., CHE SREE Workshop
Environ. Saf. Eng., WESE
Monograph title: Hydraulic Engineering - Proceedings of the 2012 SREE Conference on
Hydraulic Engineering, CHE 2012 and 2nd SREE Workshop on Environment and Safety
Engineering, WESE 2012
Issue date: 2013
Publication year: 2013
Pages: 43-48
Language: English
ISBN-13: 9781138000438
Document type: Conference article (CA)
Conference name: 2012 SREE Conference on Hydraulic Engineering, CHE 2012 and 2nd SREE
Workshop on Environment and Safety Engineering, WESE 2012
Conference date: December 21, 2012 - December 22, 2012
Conference location: Hong Kong, Hong kong
Conference code: 95984
Sponsor: Society for Resources, Environment and Engineering (SREE)
Publisher: CRC Press/Balkema, P.O. Box 447, 2300 AK Leiden,, Netherlands
Abstract: SWMM model based on GIS was used to simulate piedmont rain-runoff in Beiwucun
gravel pit, Beijing. The result showed that, with the increase in rainfall return period, the peak
time significantly advances and the peak flow increases significantly. The Gravel pit in Beiwucun
not only evidently mitigates piedmont flood, but also improves the urban river drainage standard
and increase the amount of groundwater resources, due to the storage, detention, infiltration of
the gravel pit. © 2013 Taylor & Francis Group.
Number of references: 4
Main heading: Gravel
Controlled terms: Groundwater - Hydraulic structures - Hydraulics - Landforms Rain - Safety engineering - Shore protection
Uncontrolled terms: Beijing , China - Gravel pit - Peak flows - Rainfall return periods
- SWMM models - Urban river
Classification code: 632.1 Hydraulics - 611 Hydroelectric and Tidal Power Plants - 481.1
Geology - 914 Safety Engineering - 444.2 Groundwater - 441 Dams and Reservoirs;
Hydro Development - 407.1 Maritime Structures - 443.3 Precipitation
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number: 20131216135861
Title: Particle swarm optimization for multiple multicast routing problem
Authors: Ma, Xuan1 ; Liu, Qing1/马炫;刘庆
Author affiliation: 1 School of Automation and Information Engineering, Xi'an University of
Technology, Xi'an 710048, China
Corresponding author: Ma, X. (maxuan@xaut.edu.cn)
Source title: Jisuanji Yanjiu yu Fazhan/Computer Research and Development
Abbreviated source title: Jisuanji Yanjiu yu Fazhan
Volume: 50
Issue: 2
Issue date: February 2013
Publication year: 2013
Pages: 260-268
Language: Chinese
ISSN: 10001239
CODEN: JYYFEY
Document type: Journal article (JA)
Publisher: Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China
Abstract: The optimization problem of multiple multicast routing with both bandwidth and
delay constraints is more complicated than the multicast routing problem. To get the optimal
solution of the multiple multicast routing problem quickly, this paper proposes a particle swarm
optimization algorithm based on evolution of tree structure. In the proposed algorithm a particle,
as a feasible solution of the problem, is represented as a vector, and the components of the
particle are represented by tree structure coding. The flight of particles in the search space is
implemented through the evolution of trees. Visual radius of a particle is introduced in the
orbicular social structure of particle population to enhance the ability of particle neighborhood
learning. The tree structure mutation method is designed to increase the possibility of which the
algorithm jumps out of local optima. To the infeasible solutions unsatisfied with constraints in the
population, penalty strategy is adopted to penalize the particle and its components according to
the situation unsatisfied with constraints. Simulation experiments have been carried out on
different network topologies produced by random for networks consisting of 26, 50 and 100
nodes. The results of solving the routings of multiple multicast requests show that the proposed
algorithm performs better in searching optimal solution and converging speed.
Number of references: 20
Main heading: Network routing
Controlled terms: Algorithms - Computer simulation - Electric network topology Forestry - Particle swarm optimization (PSO) - Routing algorithms - Trees
(mathematics)
Uncontrolled terms: Infeasible solutions - Multicast routing - Optimization problems Particle population - Penalty strategy - Searching optimal solution - Tree structures Visual radius
Classification code: 703.1 Electric Networks - 723 Computer Software, Data Handling and
Applications - 723.5 Computer Applications - 821.0 Woodlands and Forestry - 921.4
Combinatorial Mathematics, Includes Graph Theory, Set Theory
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number: 20131116120934
Title: The reverse mode of the photo activated charge domain in high field biased
semi-insulating GaAs
Authors: Qu, Guanghui1, 2 ; Shi, Wei1/屈光辉;施卫
Author affiliation: 1 Department of Physics, Xi'An University of Technology, Xi'an 710058,
China
2 No. 58 Yanxiang Road, Xi'an Shaanxi Province, China
Corresponding author: Qu, G. (Qgh@xaut.edu.cn)
Source title: Applied Physics Letters
Abbreviated source title: Appl Phys Lett
Volume: 102
Issue: 8
Issue date: February 25, 2013
Publication year: 2013
Article number: 082106
Language: English
ISSN: 00036951
CODEN: APPLAB
Document type: Journal article (JA)
Publisher: American Institute of Physics, 2 Huntington Quadrangle, Suite N101, Melville, NY
11747-4502, United States
Abstract: The nonlinear accumulation of the photogenerated electrons in high field biased
SI-GaAs has been defined as photo activated charge domain (PACD). The transient transport
dynamics of the PACD is investigated. The result shows that the PACD, working as a reverse gun
dipole domain when biased electric field much higher than 4 kV/cm, and the reverse mode of the
PACD could dominate the electric field shielding by its main electric field ultrafast and
exponential rising against the bias field. Such mechanisms could play an important role in GaAs
THz antenna, GaAs photoconductive semiconductor switch, and the other ultrafast GaAs devices.
© 2013 American Institute of Physics.
Number of references: 12
Main heading: Gallium arsenide
Controlled terms: Electric fields - Photoconductive switches - Semiconducting gallium
Uncontrolled terms: Electric field shielding - Photo-activated - Photoconductive
semiconductor switches - Photogenerated electrons - Reverse mode - Semi-insulating
GaAs - THz antenna - Transient transport
Classification code: 701.1 Electricity: Basic Concepts and Phenomena - 712.1.1 Single
Element Semiconducting Materials - 714.2 Semiconductor Devices and Integrated Circuits 804 Chemical Products Generally
DOI: 10.1063/1.4794073
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number: 20131216128828
Title: Prediction and prevention of water and soil erosionin qilinsi hydro-electric power station
project construction
Authors: Ren, Jianmin1, 2 ; Ran, Xinmin3 ; Jiang, Cunren2/;;;
Author affiliation: 1 School of Water Resource and Hydroelectric Engineering, Xi'an University
of Technology, Xi'an, 710048, China
2 School of Civil Engineering, Lanzhou Jiaotong University, Lanzhou, 730070, China
3 School of Resources and Environmen, Lanzhou University, Lanzhou, 730000, China
Corresponding author: Ren, J. (rjmin4148@sina.com)
Source title: Applied Mechanics and Materials
Abbreviated source title: Appl. Mech. Mater.
Volume: 295-298
Monograph title: Progress in Environmental Protection and Processing of Resource
Issue date: 2013
Publication year: 2013
Pages: 2107-2111
Language: English
ISSN: 16609336
E-ISSN: 16627482
ISBN-13: 9783037856499
Document type: Conference article (CA)
Conference name: 2012 International Conference on Sustainable Energy and Environmental
Engineering, ICSEEE 2012
Conference date: December 29, 2012 - December 30, 2012
Conference location: Guangzhou, China
Conference code: 95889
Publisher: Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany
Abstract: Qilinsi hydro-electric power station is constructed for power generation. This paper
analyses the influences of seven aspects to water and soil erosion in project constructing, such as
construction occupation land, dig and backfill of main body, project discard- dregs, materials field
exploitation, construction traffic roads, immigrants installing and geologic disaster. The water and
soil erosion quantity was predicted. Prevention measures for water and soil erosion were
presented correspondingly and it has important significance for constructing the project
successfully and improving circumjacent environment. © (2013) Trans Tech Publications,
Switzerland.
Number of references: 6
Main heading: Soils
Controlled terms: Electricity - Erosion - Power plants
Uncontrolled terms: Construction traffic - Geologic disasters - Main bodies - Paper
analysis - Power station - Prevention measures - Project construction - Soil erosion
Classification code: 407 Maritime and Port Structures; Rivers and Other Waterways - 483
Soil Mechanics and Foundations - 483.1 Soils and Soil Mechanics - 701.1 Electricity: Basic
Concepts and Phenomena - 706 Electric Transmission and Distribution
DOI: 10.4028/www.scientific.net/AMM.295-298.2107
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number: 20131216128829
Title: Study on the rainfall similar of soil erosion on loess slope
Authors: Shen, Zhenzhou1, 2 ; Yao, Wenyi2 ; Li, Zhanbin1/申震洲;姚文艺;李占斌
Author affiliation: 1 Xi'an University of Technology, Xian 710049, China
2 Yellow River Institute of Hydraulic Research, Zhengzhou 450003, China
Corresponding author: Shen, Z. (zzsh80@163.com)
Source title: Applied Mechanics and Materials
Abbreviated source title: Appl. Mech. Mater.
Volume: 295-298
Monograph title: Progress in Environmental Protection and Processing of Resource
Issue date: 2013
Publication year: 2013
Pages: 2112-2115
Language: English
ISSN: 16609336
E-ISSN: 16627482
ISBN-13: 9783037856499
Document type: Conference article (CA)
Conference name: 2012 International Conference on Sustainable Energy and Environmental
Engineering, ICSEEE 2012
Conference date: December 29, 2012 - December 30, 2012
Conference location: Guangzhou, China
Conference code: 95889
Publisher: Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany
Abstract: A lot of research about soil erosion similarity have done and obtained rich
achievements. However, strictly speaking, it need to do a lot of deep study about to establish the
ratio scale model of soil erosion, the problems unsolved include of does not establish the similar
equation system about soil erosion and sediment yield entities simulation. we did some
experiment, the date shows: the raindrop speed mainly at 0.6-5m/s in 10min, the wave crest was
1m/s and 4.2m/s. At the same times, the 0.125mm grain diameter raindrop speed was about at
0.6-1.4m/s, the 0.25mm grain diameter raindrop speed was about at 1-1.4m/s, the 0.375mm
grain diameter raindrop speed was about at 1-1.4m/s, the 0. 5mm grain diameter raindrop speed
was about at 1-3.4m/s, the 0.75mm grain diameter raindrop speed was about at 3.4m/s, the
1mm grain diameter raindrop speed was about at 4.2m/s, the 1.25mm grain diameter raindrop
speed was about at4.2-5m/s, the 1.5mm grain diameter raindrop speed was about at5m/s. ©
(2013) Trans Tech Publications, Switzerland.
Number of references: 14
Main heading: Drops
Controlled terms: Computer simulation - Erosion - Geologic models - Rain Sediments - Soils - Speed
Uncontrolled terms: Equation systems - Grain diameter - Loess slopes - Ratio scale
- Sediment yields - Soil erosion - Wave crest
Classification code: 443.3 Precipitation - 481.1 Geology - 483 Soil Mechanics and
Foundations - 483.1 Soils and Soil Mechanics - 723.5 Computer Applications - 931.1
Mechanics
DOI: 10.4028/www.scientific.net/AMM.295-298.2112
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number: 20131216133853
Title: Smoke detection based on multi-feature fusion
Authors: Wu, Dongmei1 ; Wang, Nana1 ; Yan, Hongmei1/;王娜娜;
Author affiliation: 1 Dept. of Communication, Xi-an University of Technology and Science,
Xi-an, China
Corresponding author: Wu, D.
Source title: 2012 5th International Congress on Image and Signal Processing, CISP 2012
Abbreviated source title: Int. Congr. Image Signal Process., CISP
Monograph title: 2012 5th International Congress on Image and Signal Processing, CISP 2012
Issue date: 2012
Publication year: 2012
Pages: 220-223
Article number: 6469792
Language: English
ISBN-13: 9781467309622
Document type: Conference article (CA)
Conference name: 2012 5th International Congress on Image and Signal Processing, CISP 2012
Conference date: October 16, 2012 - October 18, 2012
Conference location: Chongqing, China
Conference code: 96020
Publisher: IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC 20036-4928,
United States
Abstract: This paper discusses the application of the video image processing technology which
is applied to the fire protection system. Using the characteristics of the image of the smoke when
the fire broke out in the video sequence, the video monitoring scene was detected intelligently
and real-time. In this paper three features of smoke were extracted: the growth of the area in the
smoke spread, the irregular contour feature of the smoke region and the blurred background.
These three dynamic characteristics is fused by a BP neural network to determine if there is
smoke or not. The experimental results show that the algorithm in this article can identify smoke
in video accurately, effectively and in real time. © 2012 IEEE.
Number of references: 6
Main heading: Smoke
Controlled terms: Image processing - Neural networks
Uncontrolled terms: BP neural networks - Contour features - Dynamic characteristics Fire protection system - Multi-feature fusion - Smoke detection - Video image
processing - Video monitoring
Classification code: 723.4 Artificial Intelligence - 741 Light, Optics and Optical Devices 804 Chemical Products Generally
DOI: 10.1109/CISP.2012.6469792
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number: 20131216133989
Title: A multi-scale Conditional Random Field model for human action recognition
Authors: Zhang, Erhu1 ; Zhao, Yanqing1/张二虎;
Author affiliation: 1 Department of Information Science, Xi'An University of Technology, Xi'an,
China
Corresponding author: Zhang, E.
Source title: 2012 5th International Congress on Image and Signal Processing, CISP 2012
Abbreviated source title: Int. Congr. Image Signal Process., CISP
Monograph title: 2012 5th International Congress on Image and Signal Processing, CISP 2012
Issue date: 2012
Publication year: 2012
Pages: 77-81
Article number: 6469928
Language: English
ISBN-13: 9781467309622
Document type: Conference article (CA)
Conference name: 2012 5th International Congress on Image and Signal Processing, CISP 2012
Conference date: October 16, 2012 - October 18, 2012
Conference location: Chongqing, China
Conference code: 96020
Publisher: IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC 20036-4928,
United States
Abstract: Human action recognition is an important issue in the field of computer vision. But
the existing models put more emphasis on the single scale and little attention on multi-scale and
multi-action mode in the motion. With an aim at this problem, this paper presents a human
motion recognition method using multi-scale condition random field model. At the first, the
trajectory of human movement, the human body posture characteristics as well as the limb
movement are considered in order to extract the multi-scale feature. Then a multi-scale
Conditional Random Fields model is proposed for human action recognition. The model can take
full advantage of the context information of the action sequences, as well as mutual constraints
and impact of information between different scales, and can solve the problem that people have
multi-action at the same time. © 2012 IEEE.
Number of references: 12
Main heading: Motion estimation
Controlled terms: Feature extraction - Gesture recognition - Image segmentation Random processes - Signal processing
Uncontrolled terms: Conditional random field - Context information - Human body
postures - Human motion recognition - Human-action recognition - Multi-scale
features - Mutual constraints - Random field model
Classification code: 716 Telecommunication; Radar, Radio and Television - 716.1
Information Theory and Signal Processing - 741.1 Light/Optics - 922.1 Probability Theory
DOI: 10.1109/CISP.2012.6469928
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
10.
Accession number: 20131216134971
Title: Microstructure and mechanical properties of joints of X100 line pipe by submerged arc
welding
Authors: Zhang, Min1 ; Yang, Liang1/张敏;杨亮
Author affiliation: 1 College of Material Science and Engineering, Xi'an University of
Technology, Xi'an, 710048, China
Corresponding author: Zhang, M. (zhmmn@xaut.edu.cn)
Source title: Applied Mechanics and Materials
Abbreviated source title: Appl. Mech. Mater.
Volume: 310
Monograph title: Engineered Technologies in Materials Science, Geotechnics, Environment and
Mechanical Engineering
Issue date: 2013
Publication year: 2013
Pages: 139-144
Language: English
ISSN: 16609336
E-ISSN: 16627482
ISBN-13: 9783037856697
Document type: Conference article (CA)
Conference name: 2012 International Conference on Engineering Materials, Geotechnical
Engineering and Environmental Engineering, EMGEEE 2012
Conference date: October 26, 2012 - October 28, 2012
Conference location: Shijiazhuang, Hebei, China
Conference code: 96002
Publisher: Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany
Abstract: The microstructure, mechanical properties, fracture morphology and crystal texture
of pipeline steel X100 welded joints were investigated using optical electron microscope,
scanning electron microscope, tensile and impact testing machine. The results show that, the
texture of X100 line pipe mainly consists of acicular ferrite and granular bainite in weld zones, the
microstructure of HAZ is coarser, which lead to softening and embrittlement. The fusion line is
clear between outer weld and inner weld. The tensile strength of welded joint gets to 803 MPa,
which is about 94.81% of the base materials. The impact energy at -10°C is more than 120J, and
the average of percent shear fracture appearance at -10°C is up to 85%, is ductile fractures. ©
(2013) Trans Tech Publications, Switzerland.
Number of references: 5
Main heading: Microstructure
Controlled terms: Ductile fracture - Geotechnical engineering - Heat affected zone Impact testing - Mechanical properties - Offshore pipelines - Scanning electron
microscopy - Submerged arc welding - Tensile strength - Welding
Uncontrolled terms: Acicular ferrite - Fracture morphology - Granular bainites Impact testing machines - Microstructure and mechanical properties - Properties Scanning Electron Microscope - X100
Classification code: 951 Materials Science - 933 Solid State Physics - 741.1 Light/Optics
- 619.1 Pipe, Piping and Pipelines - 538.2.1 Welding Processes - 538.2 Welding - 483
Soil Mechanics and Foundations - 481 Geology and Geophysics - 422.2 Strength of
Building Materials : Test Methods - 421 Strength of Building Materials; Mechanical Properties
- 409 Civil Engineering, General
DOI: 10.4028/www.scientific.net/AMM.310.139
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
11.
Accession number: 20131216133992
Title: Face recognition based on a novel illumination normalization method
Authors: Zhao, Minghua1 ; Wang, Li2/赵明华;王理
Author affiliation: 1 Faculty of Computer Science and Engineering, Xi'An University of
Technology, Xi'an, China
2 Graduate School, Xi'An University of Technology, Xi'an, China
Corresponding author: Zhao, M.
Source title: 2012 5th International Congress on Image and Signal Processing, CISP 2012
Abbreviated source title: Int. Congr. Image Signal Process., CISP
Monograph title: 2012 5th International Congress on Image and Signal Processing, CISP 2012
Issue date: 2012
Publication year: 2012
Pages: 434-438
Article number: 6469931
Language: English
ISBN-13: 9781467309622
Document type: Conference article (CA)
Conference name: 2012 5th International Congress on Image and Signal Processing, CISP 2012
Conference date: October 16, 2012 - October 18, 2012
Conference location: Chongqing, China
Conference code: 96020
Publisher: IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC 20036-4928,
United States
Abstract: A novel illumination normalization method is proposed in this paper to deal with
illumination variations in face recognition. Firstly, Discrete cosine transform (DCT) is used on the
original images in logarithm domain. Direct current (DC) coefficient is reset and some low
frequency alternating current (AC) coefficients are set as zero to eliminate illumination variations
in large areas. Secondly, local normalization method is used on the inverse discrete cosine
transform images to minimize illumination variations in small areas. Experimental results show
that the proposed method can eliminate effect of illumination variations effectively and improve
performance of face recognition methods significantly. The proposed method be used to
eliminate the effect of illumination variations before face recognition. © 2012 IEEE.
Number of references: 11
Main heading: Face recognition
Controlled terms: Discrete cosine transforms - Signal processing
Uncontrolled terms: Alternating current coefficients - Discrete Cosine Transform(DCT) Face recognition methods - Illumination normalization - Illumination variation Improve performance - Inverse discrete cosine transforms - Normalization methods
Classification code: 716 Telecommunication; Radar, Radio and Television - 716.1
Information Theory and Signal Processing - 921.3 Mathematical Transformations
DOI: 10.1109/CISP.2012.6469931
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
20130405 新增 10 条
1.
Accession number: 20131316153311
Title: Influence of pulse discharge strength on microstructure of Cr films deposited by
magnetron sputtering
Authors: Cao, Zheng1 ; Jiang, Bai-Ling1 ; Shen, Jian-Dong1 ; Ning, Fu-Ping1 ; Zhang, Qian1/曹政;
蒋百灵;沈建东;宁富平;张潜
Author affiliation: 1 School of Materials Science and Engineering, Xi'an University of
Technology, Xi'an 710016, China
Corresponding author: Jiang, B.-L. (Jiangbail@vip.163.com)
Source title: Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment
Abbreviated source title: Cailiao Rechuli Xuebao
Volume: 34
Issue: 2
Issue date: February 2013
Publication year: 2013
Pages: 157-161
Language: Chinese
ISSN: 10096264
CODEN: JRXUDO
Document type: Journal article (JA)
Publisher: Editorial Office of Transactions of Materials, 18 Xueqing Road, Beijing, 100083, China
Abstract: Cr films were deposited under three different Ar pulse abnormal glow discharge
strength conditions (monopulse peak target power density: 10 W/cm2, 30 W/cm2 and 70 W/cm2)
by increasing pulse target voltage (600 V, 700 V and 800 V) in pulse unbalanced magnetron
sputtering environment. SEM, AFM, XRD and TEM were used to compare the difference of
microstructure of the Cr films deposited under the different conditions. As Ar pulse abnormal
glow discharge was strength enhanced, Cr film deposition rate was increased dramatically.
Meanwhile, the surface roughness of the films was slightly increased. Moreover, the surface
particles size was homogeneous but not increased. Besides, preferred orientation Cr (110)
diffraction peak strength was decreased obviously, which meant crystallization effect becoming
worse. Cr films exhibited columnar growth and nanoscale grains (5-10 nm) were setting type
distribution into film.
Number of references: 19
Main heading: Deposits
Controlled terms: Film growth - Glow discharges - Magnetron sputtering Microstructure - Surface roughness
Uncontrolled terms: Abnormal glow discharge - CR film - Crystallization effects Preferred orientations - Pulse - Strength condition - Target power density Unbalanced magnetron sputtering
Classification code: 951 Materials Science - 933 Solid State Physics - 931.2 Physical
Properties of Gases, Liquids and Solids - 715.1 Electronic Equipment, non-communication 712.1 Semiconducting Materials - 701.1 Electricity: Basic Concepts and Phenomena - 617
Turbines and Steam Turbines - 612 Engines - 532 Metallurgical Furnaces
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number: 20131316153809
Title: A research on the dwell time calculation model of metro trains
Authors: Hei, Xinhong1 ; Tian, Chenghua1 ; Ma, Weigang1 ; Wang, Lei1/黑新宏;;马伟刚;王磊
Author affiliation: 1 School of Computer Science and Engineering, Xi'an University of
Technology, P.O. Box 666, No. 5, South Jinhua Road, Xi'an 710048, China
Corresponding author: Hei, X. (heixinhong@xaut.edu.cn)
Source title: ICIC Express Letters
Abbreviated source title: ICIC Express Lett.
Volume: 7
Issue: 3 A
Issue date: 2013
Publication year: 2013
Pages: 825-830
Language: English
ISSN: 1881803X
Document type: Journal article (JA)
Publisher: ICIC Express Letters Office, Tokai University, Kumamoto Campus, 9-1-1, Toroku,
Kumamoto, 862-8652, Japan
Abstract: Based on actual observation of the boarding and alighting time of passengers at Xi'an
metro station firstly, this paper analyzes the dwell process of metro trains, then analyzes the time
of sub-process in detail and builds a dwell time calculation model. Finally, the paper verifies the
established model with the observed station dwell time of metro trains. The model can provide
the basic data support for metro companies to dispatch trains reasonably and improve the
efficiency of metro trains. Also, it can be used for metro train operation simulation and the metro
network evaluation. © 2013 ICIC International.
Number of references: 11
Main heading: Subway stations
Controlled terms: Computer science - Technology
Uncontrolled terms: Calculation models - Dwell process - Dwell time - Metro Metro networks - Metro stations - Number of passengers - Station dwell time
Classification code: 402.2 Public Buildings - 721 Computer Circuits and Logic Elements 722 Computer Systems and Equipment - 723 Computer Software, Data Handling and
Applications - 901 Engineering Profession
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number: 20131316151319
Title: Simulation of near-infrared photodiode detectors based on β-FeSi 2/4H-SiC
heterojunctions
Authors: Pu, Hong-Bin1 ; He, Xin1 ; Quan, Ru-Dai1 ; Cao, Lin1 ; Chen, Zhi-Ming1/蒲红斌;何欣;;
曹琳;陈治明
Author affiliation: 1 Department of Electronic Engineering, Xi'An University of Technology,
Xi'an 710048, China
Corresponding author: Pu, H.-B. (puhongbin@xaut.edu.cn)
Source title: Chinese Physics B
Abbreviated source title: Chin. Phys.
Volume: 22
Issue: 3
Issue date: March 2013
Publication year: 2013
Article number: 037301
Language: English
ISSN: 16741056
Document type: Journal article (JA)
Publisher: Institute of Physics Publishing, Temple Circus, Temple Way, Bristol, BS1 6BE, United
Kingdom
Abstract: In this paper, we propose a near-infrared p-type β-FeSi 2/n-type 4H-SiC
heterojunction photodetector with semiconducting silicide (β-FeSi2) as the active region for the
first time. The optoelectronic characteristics of the photodetector are simulated using a
commercial simulator at room temperature. The results show that the photodetector has a good
rectifying character and a good response to near-infrared light. Interface states should be
minimized to obtain a lower reverse leakage current. The response spectrum of the β-FeSi
2/4H-SiC detector, which consists of a p-type β-FeSi2 absorption layer with a doping
concentration of 1 × 1015 cm-3 and a thickness of 2.5 μm, has a peak of 755 mA/W at 1.42 μm.
The illumination of the SiC side obtains a higher responsivity than that of the β-FeSi2 side. The
results illustrate that the β-FeSi2/4H-SiC heterojunction can be used as a near-infrared
photodetector compatible with near-infrared optically-activated SiC-based power switching
devices. © 2013 Chinese Physical Society and IOP Publishing Ltd.
Number of references: 23
Main heading: Heterojunctions
Controlled terms: Infrared detectors - Photons - Silicides - Silicon carbide
Uncontrolled terms: Commercial simulators - Heterojunction photodetectors - Near
Infrared - Near-infrared photodiodes - Optoelectronic characteristics - Power
switching devices - Reverse leakage current - Spectral response
Classification code: 714.2 Semiconductor Devices and Integrated Circuits - 741.1
Light/Optics - 741.3 Optical Devices and Systems - 804 Chemical Products Generally 804.2 Inorganic Compounds
DOI: 10.1088/1674-1056/22/3/037301
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number: 20131316144069
Title: Correlation between grain boundary misorientation and M23C 6 precipitation behaviors
in a wrought Ni-based superalloy
Authors: Tang, Bin1 ; Jiang, Li1 ; Hu, Rui1 ; Li, Qi2/;;;;
Author affiliation: 1 State Key Laboratory of Solidification Processing, Northwestern
Polytechnical University, 127 Youyi Xilu, Xi'an, Shaanxi 710072, China
2 School of Material Science and Engineering, Xi'An University of Technology, 5 South Jinhua
Road, Xi'an, Shaanxi 710048, China
Corresponding author: Tang, B. (toby198489@163.com)
Source title: Materials Characterization
Abbreviated source title: Mater Charact
Volume: 78
Issue date: 2013
Publication year: 2013
Pages: 144-150
Language: English
ISSN: 10445803
CODEN: MACHEX
Document type: Journal article (JA)
Publisher: Elsevier Inc., 360 Park Avenue South, New York, NY 10010, United States
Abstract: The correlation between the grain boundary misorientation and the precipitation
behaviors of intergranular M23C6 carbides in a wrought Ni-Cr-W superalloy was investigated by
using the electron backscattered diffraction (EBSD) technique. It was observed that the grain
boundaries with a misorientation angle less than 20, as well as all coincidence site lattice (CSL)
boundaries, are immune to precipitation of the M 23C6 carbides; in contrast, the random
high-angle grain boundaries with a misorientation angle of 20 -40 provide preferential
precipitation sites of the M23C6 carbides at the random high-angle grain boundaries with a
higher misorientation angle of 55 -60 /[2 2 3] turn to retard precipitation of M23C6 carbides
owing to their nature like the Σ3 grain boundaries and retard the precipitation of M23C6 carbides.
The low-angle and certain random grain boundary segments induced by twins were found to
interrupt the precipitation of the M23C6 carbides along the high-angle grain boundaries. © 2013
Elsevier Inc.
Number of references: 29
Main heading: Lasers
Controlled terms: Carbides - Electron diffraction - Grain boundaries - Nickel Superalloys - Superconducting materials
Uncontrolled terms: Coincidence site lattices - Electron back-scattered diffraction Grain boundary misorientation - High angle grain boundaries - Misorientation angle Ni-cr-w superalloys - Precipitation behavior - Random grain boundaries
Classification code: 932.2 Nuclear Physics - 812.1 Ceramics - 744.1 Lasers, General 708.3 Superconducting Materials - 548.1 Nickel - 531.2 Metallography - 531
Metallurgy and Metallography
DOI: 10.1016/j.matchar.2013.02.006
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number: 20131316142122
Title: Magnetic hysteresis loss and corrosion behavior of LaFe 11.5Si1.5 particles coated with Cu
Authors: Tian, N.1 ; Zhang, N.N.1 ; You, C.Y.1 ; Gao, B.2 ; He, J.3/田娜;张娜娜;游才印;高博;何俊
Author affiliation: 1 School of Materials Science and Technology, Xian University of
Technology, Xian 710048, China
2 School of Science, Xian Jiaotong University, Xian 710049, China
3 Division of Functional Materials, Central Iron and Steel Research Institute, Beijing 100081,
China
Corresponding author: You, C.Y. (caiyinyou@xaut.edu.cn)
Source title: Journal of Applied Physics
Abbreviated source title: J Appl Phys
Volume: 113
Issue: 10
Issue date: March 14, 2013
Publication year: 2013
Article number: 103909
Language: English
ISSN: 00218979
CODEN: JAPIAU
Document type: Journal article (JA)
Publisher: American Institute of Physics, 2 Huntington Quadrangle, Suite N101, Melville, NY
11747-4502, United States
Abstract: The existence of porosity is useful for releasing the strain during the magnetization
and demagnetization processes of La(Fe, Si)13-based magnetocaloric materials, resulting in the
decreases of magnetic hysteresis loss and the improvement of mechanical stability. But the
porosity would affect the heat transfer and corrosion behavior. In this work, we studied the effect
of highly plastic Cu coating on the magnetocaloric properties and corrosion resistance of
LaFe11.5Si1.5 particles. It was found that Cu coating had less influence on the magnetic entropy
changes, but presented a less magnetic hysteresis loss. Under a maximum field of 1.5 T, both
particles with and without coating showed the similar magnetic entropy changes of 8 J/kg K.
Magnetic hysteresis loss was decreased from 2.2 to 1.8 J/kg after Cu coating. The corrosion
current density was decreased and the corrosion potential was increased, indicating an
improvement of the corrosion resistance with Cu coating. © 2013 American Institute of Physics.
Number of references: 14
Main heading: Magnetic hysteresis
Controlled terms: Coatings - Corrosion resistance - Corrosive effects Demagnetization - Entropy - Lanthanum alloys - Silicon
Uncontrolled terms: Corrosion behavior - Corrosion current densities - Corrosion
potentials - Cu coatings - Demagnetization process - Magnetic entropy change Magnetocaloric materials - Magnetocaloric properties
Classification code: 803 Chemical Agents and Basic Industrial Chemicals - 712.1.1 Single
Element Semiconducting Materials - 701.2 Magnetism: Basic Concepts and Phenomena 804 Chemical Products Generally - 641.1 Thermodynamics - 539.1 Metals Corrosion -
539 Metals Corrosion and Protection; Metal Plating - 547.2 Rare Earth Metals
DOI: 10.1063/1.4795265
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number: 20131216137586
Title: Cloud droplets evolutionary algorithm on reciprocity mechanism for function optimization
Authors: Wang, Lei1 ; Li, Wei1 ; Fei, Rong1 ; Hei, Xinghong1/王磊;李伟;费蓉;黑新红
Author affiliation: 1 Faculty of Computer Science and Engineering, Xi'an University of
Technology, China
Corresponding author: Wang, L. (leiwang@xaut.eud.cn)
Source title: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial
Intelligence and Lecture Notes in Bioinformatics)
Abbreviated source title: Lect. Notes Comput. Sci.
Volume: 7331 LNCS
Issue: PART 1
Monograph title: Advances in Swarm Intelligence - Third International Conference, ICSI 2012,
Proceedings
Issue date: 2012
Publication year: 2012
Pages: 268-275
Language: English
ISSN: 03029743
E-ISSN: 16113349
ISBN-13: 9783642309755
Document type: Conference article (CA)
Conference name: 3rd International Conference on Swarm Intelligence, ICSI 2012
Conference date: June 17, 2012 - June 20, 2012
Conference location: Shenzhen, China
Conference code: 96080
Sponsor: Shenzhen University; Peking University; Xi'an Jiaotong-Liverpool University
Publisher: Springer Verlag, Tiergartenstrasse 17, Heidelberg, D-69121, Germany
Abstract: For the problems of solving difficult problems in evolutionary algorithms such as
easily falling into local optimum, premature convergence because of selective pressure, a
complex and larger calculation and a lower accuracy of the solution, this paper proposes cloud
droplets evolutionary model on reciprocity mechanism (CDER). The main idea of CDER is to
simulate the phase transition of the cloud in nature which has vapor state, liquid state and solid
state, and to combine the basic ideas of evolutionary computation to realize the population
evolution. The condensation growth and collision growth of cloud droplets correspond to the
competitive evolution and reciprocal evolution of species in nature. Experiments on solving the
function optimization problems show that this model can enhance the individual competition
and survival ability, guarantee the population diversity, accelerate the convergence speed and
improve the solution precision through the iterative process of competition mechanism and
reciprocity mechanism. © 2012 Springer-Verlag.
Number of references: 13
Main heading: Problem solving
Controlled terms: Drops - Evolutionary algorithms - Iterative methods - Optimization
- Phase transitions - Vapors
Uncontrolled terms: Cloud droplets - Competition mechanism - Function Optimization
- Function optimization problems - Population diversity - Population evolution Pre-mature convergences - Reciprocity mechanisms
Classification code: 443.1 Atmospheric Properties - 723 Computer Software, Data Handling
and Applications - 801.4 Physical Chemistry - 804 Chemical Products Generally - 921
Mathematics
DOI: 10.1007/978-3-642-30976-2_32
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number: 20131216138363
Title: Effect of firing temperature on microstructure and superconductivity of YBCO films
derived from low-fluorine solution
Authors: Wu, Chuanbao1 ; Zhao, Gaoyang1 ; Chen, Yuanqing1/;赵高扬;陈源清
Author affiliation: 1 Department of Materials Physics and Chemistry, Xi'an University of
Technology, Xi'an, Shanxi, 710048, China
Corresponding author: Wu, C. (wuchuanbao015@163.com)
Source title: Materials Science Forum
Abbreviated source title: Mater. Sci. Forum
Volume: 745-746
Monograph title: Advances in Functional and Electronic Materials
Issue date: 2013
Publication year: 2013
Pages: 243-248
Language: English
ISSN: 02555476
CODEN: MSFOEP
ISBN-13: 9783037856079
Document type: Conference article (CA)
Conference name: Chinese Materials Congress 2012, CMC 2012
Conference date: July 13, 2012 - July 18, 2012
Conference location: Taiyuan, China
Conference code: 96127
Publisher: Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635, Switzerland
Abstract: Using a low-fluorine solution, YBa2Cu3O7-x (YBCO) superconducting films were
preparedon LaAlO3 (LAO) substrates by dip-coating method. YBCO films were fired at different
temperatureswith same oxygen pressure of 1.3 vol% and water vapor pressure of 7.4 vol%. Effect
of firingtemperature on film microstructure and superconductivity was investigated. The results
indicated thatYBCO films with high-degree c-axis orientation (the degree of c-axis orientation
reached 96%) canbe obtained when heat treated at 800 °C. At this temperature YBCO films were
grown on LAO withcubic-on-cubic mode, resulting in a high critical transition temperature (Tc) of
91.5 K, and criticalcurrent density (Jc) of lager than 1 MA/cm2. However, when fired at lower
temperatures, YBCO filmstrended to form a-axis grains, which degraded Jc of films. And a higher
heat treatment temperaturealso depressed superconductivity of YBCO films. © (2013) Trans Tech
Publications, Switzerland.
Number of references: 15
Main heading: Superconducting films
Controlled terms: Critical current density (superconductivity) - Crystal orientation Fluorine - Microstructure - Superconducting materials - Superconductivity Yttrium barium copper oxides
Uncontrolled terms: C-axis orientations - Critical transition temperatures - Dipcoating
methods - Film microstructures - Firing temperature - Lower temperatures Oxygen pressure - YBa2Cu3O7-x
Classification code: 933.1.1 Crystal Lattice - 933 Solid State Physics - 804.2 Inorganic
Compounds - 951 Materials Science - 804 Chemical Products Generally - 708.3
Superconducting Materials - 701.1 Electricity: Basic Concepts and Phenomena - 708.3.1
High Temperature Superconducting Materials
DOI: 10.4028/www.scientific.net/MSF.745-746.243
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number: 20131316153151
Title: Effects of heat treatment on microstructure and microhardness of Mg-3Sn-1Y alloy
Authors: Xu, Chun-Jie1 ; Tu, Tao1 ; Ma, Tao1 ; Yu, Ling1 ; Zhang, Zhong-Ming1 ; Wang,
Jin-Cheng2/徐春杰;屠涛;马涛;余玲;张忠明;王锦程
Author affiliation: 1 School of Materials Science and Engineering, Xi'an University of
Technology, Xi'an 710048, China
2 State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an
710072, China
Corresponding author: Xu, C.-J. (xuchunjie@gmail.com)
Source title: Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals
Abbreviated source title: Zhongguo Youse Jinshu Xuebao
Volume: 23
Issue: 1
Issue date: January 2013
Publication year: 2013
Pages: 9-14
Language: Chinese
ISSN: 10040609
CODEN: ZYJXFK
Document type: Journal article (JA)
Publisher: Central South University of Technology, Hunan, Changsha, 410083, China
Abstract: A nominal composition of Mg-3Sn-1Y (mass fraction, %) magnesium alloy was
prepared by casting with flux protection in electric-resistance furnace. The microstructures
as-cast, solution treatment and aging hardening of the Mg-3Sn-1Y alloy by different aging
treatments after solution treatment were investigated by an Olympus GX71 optical microscope
(OM), an FEI QUANTA 400 scanning electron microscope (SEM) equipped with an
energy-dispersive X-ray spectroscop (EDS), a RigakuD/max-3C X-ray diffraction (XRD), a
TUKON2100 Vickers hardness tester and a CRY-2P differential thermal analyzer (DTA). The results
show that as-cast Mg-3Sn-1Y alloy consists of dendritic α-Mg and intermittent mesh
inter-dendrite boundaries Mg2Sn phase, the dispersion tiny particles and fine rod-shaped MgSnY
phase. After the solution treatment, the Mg2Sn phase is completely redissolved, and the MgSnY
phase with the high temperature stability still distributes in the matrix. The addition of yttrium
elements can improve the high temperature stability of Mg-Sn alloy. Mg-3Sn-1Y alloy exhibits
obvious aging hardening characteristics. The increase of the aging temperature is advantageous
to the occurrence of aging hardening peak to some extent. On the contrary, grain growth of the
matrix will decrease the function of separation and strengthening and delay the appearance of
aging hardening peak as the ageing temperature is too high.
Number of references: 17
Main heading: Tin alloys
Controlled terms: Alloys - Cerium alloys - Differential thermal analysis - Grain
growth - Hardening - Magnesium - Magnesium alloys - Microstructure Scanning electron microscopy - Tin
- X ray diffraction
Uncontrolled terms: Aging hardening - Differential thermal analyzers - Effects of heat
treatment - Energy dispersive x-ray - High temperature stability - Optical microscopes
- Solution heat treatment - Solution treatments
Classification code: 933 Solid State Physics - 801 Chemistry - 741.1 Light/Optics 547.2 Rare Earth Metals - 951 Materials Science - 546.2 Tin and Alloys - 537.1 Heat
Treatment Processes - 531.2 Metallography - 531.1 Metallurgy - 542.2 Magnesium
and Alloys
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number: 20131216137619
Title: Brain storm optimization algorithm for multi-objective optimization problems
Authors: Xue, Jingqian1 ; Wu, Yali1 ; Shi, Yuhui2 ; Cheng, Shi2/薛敬千;吴亚丽;;;
Author affiliation: 1 School of Automation and Information Engineering, Xi'an University of
Technology, Shaanxi, China
2 Dept. of Eletrical and Electronic Engineering, Xi'an Jiaotong-Liverpool University, Suzhou,
China
Corresponding author: Xue, J. (jingqian.xue@hotmail.com)
Source title: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial
Intelligence and Lecture Notes in Bioinformatics)
Abbreviated source title: Lect. Notes Comput. Sci.
Volume: 7331 LNCS
Issue: PART 1
Monograph title: Advances in Swarm Intelligence - Third International Conference, ICSI 2012,
Proceedings
Issue date: 2012
Publication year: 2012
Pages: 513-519
Language: English
ISSN: 03029743
E-ISSN: 16113349
ISBN-13: 9783642309755
Document type: Conference article (CA)
Conference name: 3rd International Conference on Swarm Intelligence, ICSI 2012
Conference date: June 17, 2012 - June 20, 2012
Conference location: Shenzhen, China
Conference code: 96080
Sponsor: Shenzhen University; Peking University; Xi'an Jiaotong-Liverpool University
Publisher: Springer Verlag, Tiergartenstrasse 17, Heidelberg, D-69121, Germany
Abstract: In this paper, a novel multi-objective optimization algorithm based on the
brainstorming process is proposed(MOBSO). In addition to the operations used in the traditional
multi-objective optimization algorithm, a clustering strategy is adopted in the objective space.
Two typical mutation operators, Gaussian mutation and Cauchy mutation, are utilized in the
generation process independently and their performances are compared. A group of
multi-objective problems with different characteristics were tested to validate the effectiveness
of the proposed algorithm. Experimental results show that MOBSO is a very promising algorithm
for solving multi-objective optimization problems. © 2012 Springer-Verlag.
Number of references: 13
Main heading: Algorithms
Controlled terms: Artificial intelligence - Multiobjective optimization
Uncontrolled terms: Algorithm for solving - Clustering strategy - Gaussian mutation Generation process - Multi-objective optimization problem - Multi-objective problem Mutation operators - Optimization algorithms
Classification code: 723 Computer Software, Data Handling and Applications - 723.4
Artificial Intelligence - 921 Mathematics - 921.5 Optimization Techniques
DOI: 10.1007/978-3-642-30976-2_62
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
10.
Accession number: 20131316146333
Title: Influence of annealing time on microstructure of Ni-W alloys
Authors: Zhang, Qiao1 ; Liang, Shuhua1 ; Zhang, Chen1 ; Zou, Juntao1/;梁淑华;;邹军涛
Author affiliation: 1 School of Materials Science and Engineering, Xi'an University of
Technology, Xi'an, Shaanxi, 710048, China
Corresponding author: Zhang, Q. (zhqiao00@163.com)
Source title: Materials Science Forum
Abbreviated source title: Mater. Sci. Forum
Volume: 747-748
Monograph title: High Performance Structure Materials
Issue date: 2013
Publication year: 2013
Pages: 613-618
Language: English
ISSN: 02555476
CODEN: MSFOEP
ISBN-13: 9783037856086
Document type: Conference article (CA)
Conference name: Chinese Materials Congress 2012, CMC 2012
Conference date: July 13, 2012 - July 18, 2012
Conference location: Taiyuan, China
Conference code: 96128
Publisher: Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635, Switzerland
Abstract: The as-cast Ni-W alloys with 15wt%W, 25wt%W and 30wt%W were annealed in
hydrogen at 1100°C. The effect of the annealing time on the microstructure of Ni-W alloys was
studied, and the phase constituents and microstructure of annealed Ni-W alloys were
characterized by the X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results
showed that no any phase changed for Ni-15%W, Ni-25%W and Ni-30%W alloys annealed for 60
min, 90 min and 150 min, which were still consisted of single-phase Ni(W) solid solution.
However, microstructure had a significant change after annealing. With increase of annealing
time, the microstructure of Ni-15%W alloy became more uniform after annealing for 90 min, and
the average grain size was 95μm, whereas the grain size of Ni-15%W alloy increased significantly
after annealing for 150 min. For Ni-25%W and Ni-30%W, there was no obvious change on the
grain size with increase of annealing time, and the amount of oxides at grain boundaries
gradually reduced. After annealing for 150 min, the impurities at grain boundaries almost
disappeared. Subsequently, the annealing at 1100°C for 150 min was beneficial for the desired
microstructure of Ni-25%W and Ni-30%W alloys. © (2013) Trans Tech Publications, Switzerland.
Number of references: 13
Main heading: Nickel
Controlled terms: Annealing - Grain boundaries - Grain size and shape Microstructure - Scanning electron microscopy - Tungsten alloys - X ray diffraction
Uncontrolled terms: Annealing time - As-cast - Average grain size - Grain size Ni-W alloy - Phase constituent
Classification code: 537.1 Heat Treatment Processes - 543.5 Tungsten and Alloys - 548.1
Nickel - 741.1 Light/Optics - 933 Solid State Physics - 951 Materials Science
DOI: 10.4028/www.scientific.net/MSF.747-748.613
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
20130412 新增 13 条
1.
Accession number: 20131416174652
Title: Hole injection layer effect on red OLED performance
Authors: An, Tao1 ; Nan, Jing-Biao1 ; Xia, Yan-Feng1 ; Gao, Yong1/安涛;南晶彪;夏艳峰;高勇
Author affiliation: 1 Xi'an University of Technology, Xi'an 710048, China
Corresponding author: Nan, J.-B. (xiayanfeng_8@163.com)
Source title: Guangzi Xuebao/Acta Photonica Sinica
Abbreviated source title: Guangzi Xuebao
Volume: 42
Issue: 1
Issue date: January 2013
Publication year: 2013
Pages: 24-28
Language: Chinese
ISSN: 10044213
CODEN: GUXUED
Document type: Journal article (JA)
Publisher: Chinese Optical Society, P.O. Box 80, Xi'an, 710068, China
Abstract: Preparation of high efficiency, high brightness red organic light emitting diode is the
key to realize full color display, and high performance red organic light emitting diode device has
a great significance for the study. This paper mainly studies the doping agent (DCJTB)
concentration on red organic light emitting diode performance influence. In the experiment,
using vacuum thermal evaporation method, the selection of structure for ITO/2-TNATA(20
mm)/NPB(30 nm)/AlQ(50 nm):(X%)DCJTB/AlQ(30 nm)/LiF(0.8 nm)/Al(100 nm) red device, the
organic thin film function material precise evaporation is realized, in high accuracy film thickness
control instrument monitoring. Research shows that: red dopant doping concentration is
2.5%~3.0%, the 12 V voltage can be obtained under luminous intensity to a maximum of 8900
cd/m2, luminous efficiency is more than 2.8 cd/A, and luminous spectral wavelength for 610~618
nm ideal red organic light emitting diode device.
Number of references: 10
Main heading: Organic light emitting diodes (OLED)
Controlled terms: Display devices - Electron injection - Luminance
Uncontrolled terms: 2-TNATA - Doping concentration - Full-color displays - Hole
injection layers - Luminous efficiency - Organic thin films - Red-OLED - Vacuum
thermal evaporation
Classification code: 722.2 Computer Peripheral Equipment - 741.1 Light/Optics - 744.4.1
Semiconductor Lasers
DOI: 10.3788/gzxb20134201.0024
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number: 20131416175052
Title: Study on distribution characteristics of Nitrogen and Phosphorus in irrigation runoff from
double-cropping late rice field
Authors: Chen, Cheng-Guang1 ; Zhao, Qing-Zhou2 ; Hu, Bao-Wei1/陈成广;赵轻舟;胡保卫
Author affiliation: 1 Shaoxing University, Shaoxing 312000, China
2 Xi'an University of Technology, Xi'an 71004, China
Corresponding author: Hu, B.-W. (hbw@zscas.edu.cn)
Source title: Shuili Xuebao/Journal of Hydraulic Engineering
Abbreviated source title: Shuili Xuebao
Volume: 44
Issue: 2
Issue date: February 2013
Publication year: 2013
Pages: 238-242
Language: Chinese
ISSN: 05599350
CODEN: SLHPBI
Document type: Journal article (JA)
Publisher: China Water Power Press, no. 1 Xikang Road, Nanjing, 210024, China
Abstract: Taking the double-cropping late rice field in the Cao'e Riven basin of Shaoxing,
Zhejiang as the research object, the distribution of the concentrations of nitrogen (TN, NO3--N,
NH4+-N) and TP (total P) in farmland runoff from diversion system, field stagnant water, and
drainage system were studied under the irrigation in the growing season of late rice; and the
effects of straw mulch on the nitrogen and phosphorus loss in bare farmland were investigated.
The results show that (1) during the growing season of late rice, the NO3--N was the main form
of the dissolved nitrogen loss in irrigation runoff, which accounted for 63.2%~92.9% of TN, while
the NH4+-N only accounted for 5.1%~32.1% with an order of decreasing concentration of field
stagnant water>drainage system>diversion system; (2) the TP concentration in the drainage
system decreased stepwise by 14%~26% in the growing season, during which the phosphorus
loss was slighter in the jointing-booting period, but was larger in the greening-tillering and
heading-filling periods; (3) the straw mulch on the bare farmland significantly reduced the
nitrogen loss, but it showed little effect on the TP concentration in farmland runoff.
Number of references: 15
Main heading: Agricultural runoff
Controlled terms: Drainage - Farms - Irrigation - Nitrogen - Phosphorus
Uncontrolled terms: Dissolved nitrogen - Distribution characteristics - Diversion systems
- Double-cropping late rice - Growing season - Nitrogen and phosphorus - Nitrogen
and phosphorus loss - Straw mulch
Classification code: 401 Bridges and Tunnels - 406 Highway Engineering - 442 Flood
Control; Land Reclamation - 502 Mines and Quarry Equipment and Operations - 804
Chemical Products Generally - 821 Agricultural Equipment and Methods; Vegetation and Pest
Control
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number: 20131416161898
Title: Hydraulic performance experiment of an adaptive drip irrigation emitter
Authors: Feng, Junjie1, 2 ; Fei, Liangjun1 ; Deng, Zhong2 ; Lü, Mouchao2 ; Jia, Yanhui2 ; Liu,
Yang2/冯俊杰;费良军;邓忠;吕谋超;贾艳辉;刘杨
Author affiliation: 1 Institute of Water Resources and Hydro-electric Engineering, Xi'an
University of Technology, Xi'an 710048, China
2 Key Laboratory of Water-Saving Agriculture of Henan Province, Farmland Irrigation Research
Institute, Chinese Academy of Agricultural Sciences, Xinxiang 453003, China
Corresponding author: Feng, J. (fjjdg@sina.com)
Source title: Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural
Engineering
Abbreviated source title: Nongye Gongcheng Xuebao
Volume: 29
Issue: 4
Issue date: February 15, 2013
Publication year: 2013
Pages: 87-94
Language: Chinese
ISSN: 10026819
CODEN: NGOXEO
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Engineering, Agricultural Exhibition Road South,
Beijing, 100026, China
Abstract: An adaptive drip irrigation emitter is a new type of emitter which uses the multi-use
function of flow compensation and the flow adaptive. In order to examine the effect of
self-adjustment automatically on an adaptive drip irrigation emitter, we studied the hydraulic
performance of the type of AD-1 adaptive drip irrigation emitter under two different operating
modes of the flow compensation and the flow adaptive according to the working mechanism of
the adaptive drip irrigation emitter by using the negative pressure suction pump to simulate the
soil suction. The tests examined the flow rate uniformity, the relation between the supply water
pressure and drip flow, and the relation between simulated soil negative pressure and drip flow
on the adaptive drip irrigation emitter which the simulated soil negative pressure was formed by
suction pump. At the same time, we had analyzed the suitable supply water pressure. The results
showed that: the adding of drip state control structure not only retained the general flow
compensation characteristic of drip irrigation emitter, but also added in advantages including
multi-use functions of soil moisture monitoring, intelligent controlling irrigation and automatic
adjustment of drip flow. At the mode of flow compensation, the flow rate of emitter was 14.71
L/h, the coefficient of uniformity was higher, the coefficient of flow deviation was 9.79% when
the supply water pressure was rated 100 kPa. At the mode of flow adaptive, the emitter can
begin working normally when the two pressures were acting together, and when the supply
water pressure was only 30 kPa and the minimum soil suction of 20 kPa. The coefficient of flow
uniformity also stayed steady. Then we determined the minimum and the maximum suitable
water supply pressure was 30 and 50 kPa respectively. Moreover, it can adjust the drip flow rate
automatically and in a timely manner at the range of 0-11.22 L/h according to the actual soil
moisture status at the range of suitable water supply pressure 30-50 kPa. Unlike conventional
irrigation emitters, the adaptive drip irrigation emitter can better change the working mode of
dripping water passively and the technology of the irrigation system was improved to the level of
accurate and precision irrigation, and achieved the aim of fetching water initiatively according to
the needs of the crop and soil. Therefore, all of above characteristics are not only ensuring the
supply of the suitable soil moisture during the normal growth of a crop, but also promoting the
further development of an irrigation system application mode in the direction of more
intelligence and more automation.
Number of references: 29
Main heading: Irrigation
Controlled terms: Crops - Flow rate - Intelligent control - Soil moisture - Soils Water supply
Uncontrolled terms: Automatic adjustment - Coefficient of uniformity - Drip irrigation
- Hydraulic performance - Hydraulic performance experiments - Precision irrigation Soil moisture monitoring - Soil moisture status
Classification code: 446.1 Water Supply Systems - 483.1 Soils and Soil Mechanics - 631
Fluid Flow - 731.1 Control Systems - 821.3 Agricultural Methods - 821.4 Agricultural
Products
DOI: 10.3969/j.issn.1002-6819.2013.04.011
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number: 20131416157701
Title: Elasto-plastic indentation of a half-space by a rigid sphere under normal and torque
loading
Authors: Li, Pengyang1, 2 ; Wang, Zhanjiang2, 3 ; Li, Xiaoyong3 ; Jin, Xiaoqing2 ; Chen, W.
Wayne2 ; Li, Yan1 ; Wang, Q. Jane2/李鹏阳;王战江;;;;李言;
Author affiliation: 1 Department of Mechanical Engineering and Automation, Xi'An University
of Technology, Xi'an, 710048, China
2 Department of Mechanical Engineering, Northwestern University, Evanston, IL 60208, United
States
3 State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing, 400030,
China
Corresponding author: Li, P. (lee.young0808@gmail.com)
Source title: Tribology International
Abbreviated source title: Tribol Int
Volume: 62
Issue date: 2013
Publication year: 2013
Pages: 141-148
Language: English
ISSN: 0301679X
CODEN: TRBIBK
Document type: Journal article (JA)
Publisher: Elsevier Ltd, Langford Lane, Kidlington, Oxford, OX5 1GB, United Kingdom
Abstract: This work presents a numerical study of a spinning rigid sphere pressed against an
elasto-plastic half space under combined normal and torque loading. The von Mises stresses and
equivalent plastic strain under different torques are investigated. Results show that the torque
shifts the maximum von Mises stress and plastic region in the half space closer to the surface at
larger friction coefficient. An empirical formula to predict the contact area is suggested. The
evolution of the plastic region in the half space is further examined. The region shows more
complex shapes than those only under a normal load. © 2013 Elsevier Ltd.
Number of references: 36
Main heading: Loading
Controlled terms: Elastoplasticity - Geometry - Torque
Uncontrolled terms: Elastoplastic contact - Empirical formulas - Equivalent plastic strain
- Friction coefficients - Plastic regions - Spinning sphere - Torque loadings - Von
Mises stress
Classification code: 421 Strength of Building Materials; Mechanical Properties - 672 Naval
Vessels - 921 Mathematics
DOI: 10.1016/j.triboint.2013.02.015
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number: 20131416166889
Title: Circle fitting using a virtual source localization algorithm in wireless sensor networks
Authors: Liang, Junli1, 2 ; Zhang, Miaohua1 ; Zeng, Xianju3 ; Zhao, Kexin2 ; Li, Jian2/梁军利;张
妙花;曾宪聚
Author affiliation: 1 Xi'An University of Technology, Xi'an 710048, China
2 University of Florida, Gainesville, FL 32611, United States
3 College of Management, Shenzhen University, Shenzhen 518060, China
Corresponding author: Liang, J. (heery_2004@hotmail.com)
Source title: International Journal of Distributed Sensor Networks
Abbreviated source title: Int. J. Distrib. Sens. Netw.
Volume: 2013
Issue date: 2013
Publication year: 2013
Article number: 203719
Language: English
ISSN: 15501329
E-ISSN: 15501477
Document type: Journal article (JA)
Publisher: Hindawi Publishing Corporation, 410 Park Avenue, 15th Floor, 287 pmb, New York,
NY 10022, United States
Abstract: A novel circle fitting algorithm is proposed in this paper. The key points of this paper
are given as follows: (i) it formulates the circle fitting problem into the special source localization
one in wireless sensor networks (WSN); (ii) the multidimensional scaling (MDS) analysis is applied
to the data points, and thus the propagator-like method is proposed to represent the circle
center parameters as the functions of the circle radius; (iii) the virtual source localization model
can be rerepresented as special nonlinear equations of a unique variable (the circle radius) rather
than the original three ones (the circle center and radius), and thus the classical fixed-point
iteration algorithm is applied to determine the radius and the circle center parameters. The
effectiveness of the proposed circle fitting approach is demonstrated using the simulation and
experimental results. © 2013 Junli Liang et al.
Number of references: 13
Main heading: Wireless sensor networks
Controlled terms: Algorithms
Uncontrolled terms: Circle fitting - Circle fitting algorithm - Data points - Fixed-point
iterations - Keypoints - Multidimensional scaling analysis - Source localization Virtual sources
Classification code: 723 Computer Software, Data Handling and Applications - 732 Control
Devices - 921 Mathematics
DOI: 10.1155/2013/203719
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number: 20131416175127
Title: Alignment growth mechanisms of rod-like ZnO on zinc substrates
Authors: Liu, Chang-You1 ; Wang, Jin-Fang1 ; Sun, Xiao-Yan1 ; Wang, Ze-Wen2 ; Jie, Wan-Qi1/刘
长友;王金芳;孙晓燕;王泽温;介万奇
Author affiliation: 1 State Key Laboratory of Solidification Processing, School of Materials
Science and Engineering, Northwestern Polytechnical University, Xi'an 710072, China
2 College of Material Science and Engineering, Xi'an University of Technology, Xi'an 710032,
China
Corresponding author: Liu, C.-Y. (lcy@nwpu.edu.cn)
Source title: Wuji Cailiao Xuebao/Journal of Inorganic Materials
Abbreviated source title: Wuji Cailiao Xuebao
Volume: 28
Issue: 3
Issue date: March 2013
Publication year: 2013
Pages: 301-306
Language: Chinese
ISSN: 1000324X
CODEN: WCXUET
Document type: Journal article (JA)
Publisher: Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China
Abstract: Discontinuous films of ZnO particles were prepared on zinc substrates by air
pre-oxidation process. The arrays of rod-like ZnO nano-/micro-crystals on zinc substrates were
synthesized through hydrothermal processing with N2H4·H2O solution. It is found that the
rod-like ZnO nano-/micro-crystals align well on the substrate surface with a unique
crystallographic orientation. The experimental results suggest a free alignment growth
mechanism for rod-like ZnO nano-/micro-crystals on zinc substrates. The crystallization habit of
ZnO nano-/micro-crystals is to grow along with the c axis fast under hydrothermal conditions,
thus the well alignment of rod-like ZnO nano-/micro-crystals only depends on the state of ZnO
nuclei on the substrate surface. The states of ZnO nuclei on the substrate surface with a unique
crystallographic orientation well agree with others, which regulates the alignment of rod-like ZnO
nano-/micro-crystals. In temperature-dependent photoluminescence spectra, the "negative
thermal quenching" phenomenon of near band-gap edge excitons is observed in the temperature
ranging from 30 K to 60 K, which identify two non-radiative processes and one negative thermal
quenching process.
Number of references: 29
Main heading: Substrates
Controlled terms: Alignment - Crystal orientation - Photoluminescence - Zinc Zinc oxide
Uncontrolled terms: Alignment growth - Crystallographic orientations - Hydrothermal
conditions - Hydrothermal processing - Nonradiative process - Pre-oxidation process
- Temperature-dependent photoluminescence - Zinc substrates
Classification code: 933.1.1 Crystal Lattice - 804.2 Inorganic Compounds - 801 Chemistry
- 741.1 Light/Optics - 601.1 Mechanical Devices - 546.3 Zinc and Alloys - 461
Bioengineering and Biology
DOI: 10.3724/SP.J.1077.2013.12225
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number: 20131416174574
Title: Design of RCD active gate control circuit for series connected IGBTs
Authors: Ning, Dalong1 ; Tong, Xiangqian1 ; Li, Xia2 ; Liu, Ning2 ; Feng, Wutong2 ; Li, Yuning2/宁
大龙;同向前;李侠;刘宁;冯武彤;李育宁
Author affiliation: 1 Xi'an University of Technology, Xi'an 710048, China
2 Xi'an XD Power Systems Co., Ltd., Xi'an 710016, China
Corresponding author: Ning, D.
Source title: Diangong Jishu Xuebao/Transactions of China Electrotechnical Society
Abbreviated source title: Diangong Jishu Xuebao
Volume: 28
Issue: 2
Issue date: February 2013
Publication year: 2013
Pages: 192-198
Language: Chinese
ISSN: 10006753
CODEN: DIJXE5
Document type: Journal article (JA)
Publisher: Chinese Machine Press, 1 Nanjie Baiwanzhuang, Beijig, 100037, China
Abstract: The RCD active gate control circuit for series connected IGBTs is researched in order to
balance the IGBT's collector-emitter voltage dynamically. The principle of the RCD active gate
control circuit and parameters selection guide of the circuit elements is introduced. The function
of each element is analyzed with the help of equivalent circuit under different switch states of
IGBT, and the design method of RCD active gate control circuit is proposed to meet the voltage
balancing requirement. The feasibility of the proposed method is verified by an experimental
system, and the results show that voltage balancing is well achieved whether gate signal of IGBTs
in a series stack is synchronous or not.
Number of references: 11
Main heading: Electric network analysis
Controlled terms: Electrical engineering - Technology
Uncontrolled terms: Active gate control - Circuit elements - Collector-emitter voltage Experimental system - Parameters design - Parameters selection - Series-connected
- Voltage balancing
Classification code: 703.1.1 Electric Network Analysis - 709 Electrical Engineering, General
- 901 Engineering Profession
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number: 20131416161808
Title: Chainlike multi-population multi-agent evolutionary algorithm
Authors: Wu, Ya-Li1 ; Jin, Xiao-Yi1 ; Liu, Ge1/吴亚丽;靳笑一;刘格
Author affiliation: 1 Automation and Information Engineering School, Xi'an University of
Technology, Xi'an Shaanxi 710048, China
Corresponding author: Wu, Y.-L. (yliwu@xaut.edu.cn)
Source title: Kongzhi Lilun Yu Yingyong/Control Theory and Applications
Abbreviated source title: Kong Zhi Li Lun Yu Ying Yong
Volume: 30
Issue: 1
Issue date: January 2013
Publication year: 2013
Pages: 37-53
Language: Chinese
ISSN: 10008152
CODEN: KLYYEB
Document type: Journal article (JA)
Publisher: South China University of Technology, Guangzhou, 510640, China
Abstract: We propose a novel chainlike multi-population multi-agent evolutionary algorithm
which combines the dynamic neighborhood environment chainlike structure with the
evolutionary framework of multi-population. This algorithm provides the evolution structure for
multi-populations interaction. Agents in the population increase their own energy by competition,
cooperation and self-study with its dynamic neighborhood agents. The chainlike structure
improves the efficiency of algorithms and reduces the computational complexity. The interaction
of information among various populations in a regular period of time improves the diversity of
the population and decreases the possibility of sticking at local optima. Theoretical analysis and
simulation of multiple test functions show that the new algorithm is very good for handling
high-dimension optimization problems.
Number of references: 11
Main heading: Evolutionary algorithms
Uncontrolled terms: Analysis and simulation - Chainlike structure - Dynamic
neighborhood - Evolution structure - Evolutionary framework - High-dimension
optimization problems - Multi population - Regular periods
Classification code: 723 Computer Software, Data Handling and Applications - 921
Mathematics
DOI: 10.7641/CTA.2013.11238
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number: 20131416157386
Title: Spatial variability of soil organic carbon in a typical watershed in the source area of the
middle Dan River, China
Authors: Xu, Guo-Ce1, 2 ; Li, Zhan-Bin1, 2, 3 ; Li, Peng3 ; Lu, Ke-Xin3 ; Wang, Yun4/徐国策;李占
斌;李鹏;鲁克新;
Author affiliation: 1 State Key Laboratory of Soil Erosion and Dry-land Farming on the Loess
Plateau, Institute of Soil and Water Conservation, Chinese Academy of Sciences and Ministry of
Water Resources, Yangling, Shaanxi 712100, China
2 Graduate School of Chinese Academy of Sciences, Beijing 100039, China
3 Key Laboratory of Northwest Water Resources and Environment Ecology of Ministry of
Education, Xi'An University of Technology, Xi' an, Shaanxi 710048, China
4 College of Resources and Environment, Northwest A and F University, Yangling, Shaanxi
712100, China
Corresponding author: Xu, G.-C. (xuguoce_x@163.com)
Source title: Soil Research
Abbreviated source title: Soil Res.
Volume: 51
Issue: 1
Issue date: 2013
Publication year: 2013
Pages: 41-49
Language: English
ISSN: 1838675X
Document type: Journal article (JA)
Publisher: CSIRO, P.O. Box 1139, Collingwood, VIC 3066, Australia
Abstract: Soil organic carbon (SOC) plays an important role in maintaining and improving soil
fertility and quality, in addition to mitigating climate change. Understanding SOC spatial
variability is fundamental for describing soil resources and predicting SOC. In this study, SOC
content and SOC mass were estimated based on a soil survey of a small watershed in the Dan
River, China. The spatial heterogeneity of SOC distribution and the impacts of land-use types,
elevation, slope, and aspect on SOC were also assessed. Field sampling was carried out based on
a 100m by 100m grid system overlaid on the topographic map of the study area, and samples
were collected in three soil layers to a depth of 40cm. In total, 222 sites were sampled and 629
soil samples were collected. The results showed that classical kriging could successfully
interpolate SOC content in the watershed. Contents of SOC showed strong spatial heterogeneity
based on the values of the coefficient of variation and the nugget ratio, and this was attributed
largely to the type of land use. The range of the semi-variograms increased with increasing soil
depth. The SOC content in the soil profile decreased as soil depth increased, and there were
significant (P<0.01) differences among the three soil layers. Land use had a great impact on the
SOC content. ANOVA indicated that the spatial variation of SOC contents under different land use
types was significant (P<0.05). The SOC mass of different land-use types followed the order
grassland>forestland>cropland. Mean SOC masses of grassland, forestland, and cropland at a
depth of 0-40cm were 5.87, 5.61, and 5.07kgm-2, respectively. The spatial variation of SOC
masses under different land-use types was significant (P<0.05). ANOVA also showed significant
(P<0.05) impact of aspect on SOC mass in soil at 0-40cm. Soil bulk density played an important
role in the assessment of SOC mass. In conclusion, carbon in soils in the source area of the middle
Dan River would increase with conversion from agricultural land to forest or grassland. © 2013
CSIRO.
Number of references: 34
Main heading: Soils
Controlled terms: Analysis of variance (ANOVA) - Climate change - Forestry - Land
use - Landforms - Maps - Rivers - Soil surveys - Watersheds
Uncontrolled terms: Agricultural land - Coefficient of variation - Different land use types
- Geo-statistics - Soil organic carbon - Spatial heterogeneity - Spatial variability Spatial variations
Classification code: 902.1 Engineering Graphics - 821.0 Woodlands and Forestry - 483.1
Soils and Soil Mechanics - 922 Statistical Methods - 481.1 Geology - 444.1 Surface
Water - 403 Urban and Regional Planning and Development - 451 Air Pollution
DOI: 10.1071/SR12327
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
10.
Accession number: 20131416171522
Title: Fabrication of SiCp/Cu-Al electronic packaging material by pressureless infiltration
method
Authors: Yang, L.1 ; Zhang, M.1/杨亮;张敏
Author affiliation: 1 College of Material Science and Engineering, Xi'An University of
Technology, Xi'an 710048, China
Corresponding author: Yang, L. (yangliang20070126@163.com)
Source title: Materials Science and Technology (United Kingdom)
Abbreviated source title: Mater. Sci. Technol.
Volume: 29
Issue: 3
Issue date: March 2013
Publication year: 2013
Pages: 326-331
Language: English
ISSN: 02670836
E-ISSN: 17432847
CODEN: MSCTEP
Document type: Journal article (JA)
Publisher: Maney Publishing, Suite 1C, Joseph's Well, Hanover Walk, Leeds, LS3 1AB, United
Kingdom
Abstract: The SiCp/Cu-Al composites with 72·7 vol.-%SiC particles were prepared by
pressureless infiltration, and Cu coated SiC particles (SiC/Cu composite powder) were used as
reinforcements for aluminium matrix. The effects of moulding pressure, infiltration temperature
and infiltration time on the infiltration depth were studied by orthogonal test. The morphology
and phase structure of the composites were analysed by scanning electron microscopy and X-ray
diffraction. The results show that under moulding pressure of 10 MPa, infiltration temperature of
850°C and infiltration time of 3 h conditions, the SiCp/Cu-Al composite structure is uniform and
dense without obvious porosity defects, and the thermal expansion coefficient is close to thermal
expansion coefficient of the Turner model. © 2013 Institute of Materials, Minerals and Mining.
Number of references: 9
Main heading: Silicon carbide
Controlled terms: Aluminum - Aluminum coatings - Electronics packaging - Molding
- Packaging materials - Scanning electron microscopy - X ray diffraction
Uncontrolled terms: Electronic packaging material - Infiltration temperatures Infiltration time - Moulding pressure - Pressureless infiltration - Pressureless
infiltration method - SiC/Cu composites - Thermal expansion coefficients
Classification code: 813.2 Coating Materials - 804.2 Inorganic Compounds - 741.1
Light/Optics - 716 Telecommunication; Radar, Radio and Television - 931.3 Atomic and
Molecular Physics - 715 Electronic Equipment, General Purpose and Industrial - 694.2
Packaging Materials - 541.1 Aluminum - 535.2 Metal Forming - 714 Electronic
Components and Tubes
DOI: 10.1179/1743284712Y.0000000152
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
11.
Accession number: 20131416175224
Title: Spatiotemporal laws of post-construction settlement of loess-filled foundation of Lüliang
Airport
Authors: Zhu, Cai-Hui1 ; Li, Ning1 ; Liu, Ming-Zhen2 ; Wei, Yi-Feng3/朱才辉;李宁;刘明振;魏弋
峰
Author affiliation: 1 Institute of Geotechnical Engineering, Xi'an University of Technology,
Xi'an 710048, China
2 College of Civil Engineering, Xi'an University of Architecture and Technology, Xi'an 710055,
China
3 China Airport construction Group Corporation of CAAC, Beijing 100101, China
Corresponding author: Zhu, C.-H. (zhucaihui123@163.com)
Source title: Yantu Gongcheng Xuebao/Chinese Journal of Geotechnical Engineering
Abbreviated source title: Yantu Gongcheng Xuebao
Volume: 35
Issue: 2
Issue date: February 2013
Publication year: 2013
Pages: 293-301
Language: Chinese
ISSN: 10004548
CODEN: YGXUEB
Document type: Journal article (JA)
Publisher: Chinese Society of Civil Engineering, 34 Hujuguan, Nanjing, 210024, China
Abstract: Based on the monitoring results of the post-construction settlement of the loess-filled
embankment foundation of Lu&die;liang Airport, the components of the post-construction
settlement of the high fill and the original foundation and the causes of uneven settlement are
analyzed. The influence factors such as the height of fill, filling rate, general compaction degree
and time on the post-construction settlement are quantitatively analyzed. The recursive analysis
method based on the strain rate is proposed to predict the post-construction settlement. The
results show that the decrease of the filling rate, appropriate increase of foundation compaction
degree and decrease of filling height are the effective measures to reduce the post-construction
settlement. The recursive analysis can more approximately describe the effect of construction
technology on post-construction settlement.
Number of references: 14
Main heading: Settlement of structures
Controlled terms: Airports - Compaction - Filling - Foundations - Sediments
Uncontrolled terms: Construction technologies - Effective measures - Embankment
foundation - Monitoring results - Post-construction settlement - Recursive analysis Settlement monitoring - Spatiotemporal law
Classification code: 402 Buildings and Towers - 405 Construction Equipment and Methods;
Surveying - 431.4 Airports - 483 Soil Mechanics and Foundations - 536.1 Powder
Metallurgy Operations - 691.2 Materials Handling Methods
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
12.
Accession number: 20131416175212
Title: Mesoscopic deformation mechanism of loess high-fill foundation based on soil electrical
resistivity
Authors: Zhu, Caihui1 ; Li, Ning1/朱才辉;李宁
Author affiliation: 1 Institute of Geotechnical Engineering, Xi'an University of Technology,
Xi'an, Shaanxi 710048, China
Corresponding author: Zhu, C. (zhucaihui123@163.com)
Source title: Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and
Engineering
Abbreviated source title: Yanshilixue Yu Gongcheng Xuebao
Volume: 32
Issue: 3
Issue date: March 2013
Publication year: 2013
Pages: 640-648
Language: Chinese
ISSN: 10006915
CODEN: YLGXF5
Document type: Journal article (JA)
Publisher: Academia Sinica, Wuhan, 430071, China
Abstract: In order to reveal the mesoscopic deformation mechanism of loess high-fill
foundation of Luliang airport, the soil electrical resistivity-consolidation combination measuring
instrument are developed based on the principle of soil electrical resistivity. The dynamic
variation law of the electrical resistivity of Q3 loess are obtained through in-situ monitoring, field
sampling and laboratory test under different initial saturations and constant load. The electrical
resistivity-strain curve model of Q3 loess to the limits of optimum moisture content is proposed;
and its moisture migration and structural changing characteristics under constant load are also
obtained. The study results show that the post-construction deformation of the loess high-fill
foundation top surface is composed of the consolidation deformation of initial foundation and
the fill bellow the surface to a certain depth and the long-term creep deformation of deep
overconsolidated soil. The mesoscopic deformation mechanism of soil is revealed initially; and
the study provides scientific basis for the establishment of loess high-fill soil constitutive model
and reasonable selection of the numerical analysis model.
Number of references: 20
Main heading: Geologic models
Controlled terms: Creep - Electric conductivity - Foundations - Hydraulic
conductivity - Sediments - Soil mechanics - Soils - Superconducting materials
Uncontrolled terms: Creep deformations - Deformation mechanism - Initial saturation
- Numerical analysis models - Optimum moisture content - Overconsolidated soils Soil constitutive model - Soil electrical resistivities
Classification code: 951 Materials Science - 708.3 Superconducting Materials - 701.1
Electricity: Basic Concepts and Phenomena - 632.1 Hydraulics - 483.1 Soils and Soil
Mechanics - 483 Soil Mechanics and Foundations - 481.1 Geology - 421 Strength of
Building Materials; Mechanical Properties - 405 Construction Equipment and Methods;
Surveying
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
20130419 新增 15 条
1.
Accession number: 20131516189206
Title: Fabrication and properties of Cu/MgB2 composites by vacuum sintering
Authors: Yang, Qing1, 2 ; Zou, Juntao1, 2 ; Liu, Zhao1 ; Yu, Xiaojiang1/杨卿;邹军涛;;余晓皎
Author affiliation: 1 Xi'an University of Technology, 5 South Jinhua Road, Xi'an 710048, China
2 Shaanxi Province Key Laboratory for Electrical Materials and Infiltration Technology, Xi'an
University of Technology, 5 South Jinhua Road, Xi'an 710048, China
Corresponding author: Yang, Q. (yangqing@xaut.edu.cn)
Source title: Materials Science Forum
Abbreviated source title: Mater. Sci. Forum
Volume: 749
Monograph title: Materials Performance, Modeling and Simulation
Issue date: 2013
Publication year: 2013
Pages: 141-144
Language: English
ISSN: 02555476
CODEN: MSFOEP
ISBN-13: 9783037856093
Document type: Conference article (CA)
Conference name: Chinese Materials Congress 2012, CMC 2012
Conference date: July 13, 2012 - July 18, 2012
Conference location: Taiyuan, China
Conference code: 96431
Sponsor: 667
Publisher: Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635, Switzerland
Abstract: Cu/MgB2 composites with different content of MgB2 (10, 20, 30 vol.%) were
fabricated by vacuum sintering of copper and MgB2 powders. The effects of MgB2 content and
sintering process on the properties of Cu/MgB2 composites including the microstructures,
relative density, electrical conductivity and hardness were then investigated. The results showed
that the distribution uniformity of MgB2 on copper matrix decreased obviously with the increase
of MgB2 content, the hardness of Cu/MgB2 composites increased and the relative density
decreased slightly though the electrical conductivity decreased greatly. The relative density and
hardness of Cu/MgB2 composites increased after the repressing-resintering process, the
electrical conductivity was also improved slightly. © (2013) Trans Tech Publications, Switzerland.
Number of references: 10
Main heading: Sintering
Controlled terms: Computer simulation - Electric conductivity - Hardness - Metallic
matrix composites - Resins - Vacuum
Uncontrolled terms: Copper matrix - Distribution uniformity - Electrical conductivity Property - Relative density - Repressing-resintering - Sintering process - Vacuum
sintering
Classification code: 815.1.1 Organic Polymers - 723.5 Computer Applications - 701.1
Electricity: Basic Concepts and Phenomena - 951 Materials Science - 633 Vacuum
Technology - 531 Metallurgy and Metallography - 421 Strength of Building Materials;
Mechanical Properties - 536.1 Powder Metallurgy Operations
DOI: 10.4028/www.scientific.net/MSF.749.141
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number: 20131516198434
Title: Experimental research on photovoltaic module for asymmetrical compound parabolic
concentrator
Authors: Jinshe, Yuan1 ; Mingyue, Wang1 ; Changmin, Yang2/;;;
Author affiliation: 1 Department of Physics, Chongqing Normal University, Chongqing 400047,
China
2 Department of Applied Physics, Xian University of Technology, Shaanxi, Xian 710048, China
Corresponding author: Jinshe, Y. (yuanjesse@yahoo.com.cn)
Source title: ISES Solar World Congress 2007, ISES 2007
Abbreviated source title: ISES Sol. World Congr., ISES
Volume: 3
Monograph title: ISES Solar World Congress 2007, ISES 2007
Issue date: 2007
Publication year: 2007
Pages: 1561-1563
Language: English
ISBN-13: 9781622765447
Document type: Conference article (CA)
Conference name: International Solar Energy Society Solar World Congress 2007, ISES 2007
Conference date: September 18, 2007 - September 21, 2007
Conference location: Beijing, China
Conference code: 96356
Publisher: International Solar Energy Society, Villa Tannheim, Wiesentalstrasse 50, D-79115,
Germany
Abstract: The photovoltaic module for the use of fixed asymmetrical CPC concentrator was
designed and fabricated based on the performance of polycrystalline-silicon solar cells with back
surface field (BSF) structure. The performance of the combination of the module and
asymmetrical CPC concentrator was investigated. The results show its effective concentration
ratio to be 2.46 and the output power of the PV-a-CPC system to be increased by 2.13 times
compared with that of the module approximately. Copyright © (2007) by the International Solar
Energy Society.
Number of references: 4
Main heading: Concentration (process)
Uncontrolled terms: Back surface fields - Compound parabolic concentrator - Effective
concentration - Experimental research - Output power - Photovoltaic modules
Classification code: 802.3 Chemical Operations
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number: 20131516195831
Title: Robust ellipse fitting based on sparse combination of data points
Authors: Liang, Junli1 ; Zhang, Miaohua1 ; Liu, Ding1 ; Zeng, Xianju2 ; Ojowu, Ode3 ; Zhao,
Kexin3 ; Li, Zhan4 ; Liu, Han1/梁军利;张妙花;刘丁;曾宪聚
Author affiliation: 1 School of Automation and Information Engineering, Xi'An University of
Technology, Xi'an 710048, China
2 Shenzhen University, Shenzhen 518060, China
3 University of Florida, Gainesville, FL 32611, United States
4 NorthWest University, Xi'an 710069, China
Corresponding author: Liang, J. (liangjunli@xaut.edu.cn)
Source title: IEEE Transactions on Image Processing
Abbreviated source title: IEEE Trans Image Process
Volume: 22
Issue: 6
Issue date: 2013
Publication year: 2013
Pages: 2207-2218
Article number: 6459596
Language: English
ISSN: 10577149
CODEN: IIPRE4
Document type: Journal article (JA)
Publisher: Institute of Electrical and Electronics Engineers Inc., 445 Hoes Lane / P.O. Box 1331,
Piscataway, NJ 08855-1331, United States
Abstract: Ellipse fitting is widely applied in the fields of computer vision and automatic industry
control, in which the procedure of ellipse fitting often follows the preprocessing step of edge
detection in the original image. Therefore, the ellipse fitting method also depends on the
accuracy of edge detection besides their own performance, especially due to the introduced
outliers and edge point errors from edge detection which will cause severe performance
degradation. In this paper, we develop a robust ellipse fitting method to alleviate the influence of
outliers. The proposed algorithm solves ellipse parameters by linearly combining a subset of
('more accurate') data points (formed from edge points) rather than all data points (which
contain possible outliers). In addition, considering that squaring the fitting residuals can magnify
the contributions of these extreme data points, our algorithm replaces it with the absolute
residuals to reduce this influence. Moreover, the norm of data point errors is bounded, and the
worst case performance optimization is formed to be robust against data point errors. The
resulting mixed $l1\hbox{-}l2$ optimization problem is further derived as a second-order cone
programming one and solved by the computationally efficient interior-point methods. Note that
the fitting approach developed in this paper specifically deals with the overdetermined system,
whereas the current sparse representation theory is only applied to underdetermined systems.
Therefore, the proposed algorithm can be looked upon as an extended application and
development of the sparse representation theory. Some simulated and experimental examples
are presented to illustrate the effectiveness of the proposed ellipse fitting approach. ©
1992-2012 IEEE.
Number of references: 28
Main heading: Statistics
Controlled terms: Algorithms - Biometrics - Edge detection - Errors Optimization
Uncontrolled terms: Diameter control - Edge point - Ellipse fitting - Iris recognition
- Least squares - Minimax criterion - outliers - Overdetermined systems - Silicon
single crystals - Sparse representation
Classification code: 922.2 Mathematical Statistics - 921.5 Optimization Techniques - 921
Mathematics - 732 Control Devices - 723 Computer Software, Data Handling and
Applications - 716 Telecommunication; Radar, Radio and Television - 461 Bioengineering
and Biology
DOI: 10.1109/TIP.2013.2246518
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number: 20131516189235
Title: W-Ti alloy prepared by hydrogen reduction of nanometer WO3-TiH2 powders
Authors: Xiao, Peng1 ; Qu, Yingchun1 ; Yang, Xiaohong1 ; Liang, Shuhua1/肖鹏;;杨晓红;梁淑华
Author affiliation: 1 School of Materials Science and Engineering, Xi'an University of
Technology, Xi'an 710048, China
Corresponding author: Xiao, P. (xiaopeng01@xaut.edu.cn)
Source title: Materials Science Forum
Abbreviated source title: Mater. Sci. Forum
Volume: 749
Monograph title: Materials Performance, Modeling and Simulation
Issue date: 2013
Publication year: 2013
Pages: 316-321
Language: English
ISSN: 02555476
CODEN: MSFOEP
ISBN-13: 9783037856093
Document type: Conference article (CA)
Conference name: Chinese Materials Congress 2012, CMC 2012
Conference date: July 13, 2012 - July 18, 2012
Conference location: Taiyuan, China
Conference code: 96431
Sponsor: 667
Publisher: Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635, Switzerland
Abstract: In this study, TiH2 and WO3 powders were co-milled together, then the ultrafine
powderswere reduced at H2 atmosphere, and W-Ti alloys were prepared by the solid phase
sintering. The mainpurpose of WO3 powder instead of the W powder was to use the transition of
the lattice type of WO3,and the lattice distortion and defects in the lattice of W would promote
Ti atom diffusing into W. Itwas easy to form a W-rich solid solution and reduce the effect of
Ti-rich phase. The results showedthat when the milling time of WO3-TiH2 was 24h, the particle
size of mixed powder reachednanoscale, and WO3 particles were coated on the surface of TiH2
particles. The particle size changedunobviously with the increase of the milling time. The XRD
analysis showed that the milled WO3 andTiH2 were not decomposed in the milling process.
When WO3-TiH2 milled powders weredecomposed in the H2 atmosphere at 800°C, WO3
reduction was not sufficient, and the middle phaseof WO2 was existed. When the reduction
temperature was 850°C for 2h, WO3 was reduced to W, andthe phase of WO2 was disappeared.
A small amount of TiO2 was formed by the decomposed Ti anddecomposed O from WO3. W-10Ti
alloys were prepared by the solid-phase sintering with the reducedpowders at 850°C. It was
found that the amount of W-rich solid solution in W-10Ti alloy wasdecreased, because the
diffusion of Ti to W was inhibited by a small amount of TiO2 in grainboundaries during the
sintering process. © (2013) Trans Tech Publications, Switzerland.
Number of references: 12
Main heading: Titanium alloys
Controlled terms: Computer simulation - Hydrogen - Milling (machining) - Particle
size - Powders - Sintering - Solid solutions - Titanium dioxide
Uncontrolled terms: Hydrogen-reduction - Lattice distortions - Milled powders Milling process - Reduction temperatures - Sintering process - Solid phase sintering Solid-phase
Classification code: 933 Solid State Physics - 804.2 Inorganic Compounds - 804 Chemical
Products Generally - 943.2 Mechanical Variables Measurements - 723.5 Computer
Applications - 542.3 Titanium and Alloys - 536.1 Powder Metallurgy Operations 604.2 Machining Operations
DOI: 10.4028/www.scientific.net/MSF.749.316
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number: 20131516199920
Title: Microstructure and properties of Cu/V0.97W0.03O2 composite material
Authors: Zou, Jun-Tao1 ; Zhang, Le1 ; Wang, Xian-Hui1 ; Huang, Xing1 ; Liang, Shu-Hua1/邹军涛;
张乐;王献辉;黄星;梁淑华
Author affiliation: 1 School of Materials Science and Engineering, Xi'an University of
Technology, Xi'an 710048, China
Corresponding author: Wang, X.-H. (xhwang693@xaut.edu.cn)
Source title: Fenmo Yejin Cailiao Kexue yu Gongcheng/Materials Science and Engineering of
Powder Metallurgy
Abbreviated source title: Fenmo Yejin Cailiao Kexue yu Gongcheng
Volume: 18
Issue: 1
Issue date: February 2013
Publication year: 2013
Pages: 53-58
Language: Chinese
ISSN: 16730224
Document type: Journal article (JA)
Publisher: Central South University, Lushan Nanlu, Changsha, 410043, China
Abstract: Cu/V0.97W0.03O2 composite materials were prepared by powder metallurgy. The
composition and surface microstructure were analyzed by SEM and EDS, the crystals structure in
room temperature was detected by XRD, the conductivity of different V0.97W0.03O2 doping
rates composite during changing temperature was tested by Eddy current electric conductance
meter. The results indicate that Cu/V0.97W0.03O2 composite materials exhibit an abrupt change
of conductivity when the temperature is near 0°C, the range of change increases with increasing
the amount of V0.97W0.03O2. Meanwhile, the crystal structure of V0.97W0.03O2 in
Cu/V0.97W0.03O2 composite materials is the same as tetragon phase VO2, which indicates that
there is no interaction on crystal structure between Cu and V0.97W0.03O2, however, a small
amount of V0.97W0.03O2 decomposes in the sintering process.
Number of references: 14
Main heading: Composite materials
Controlled terms: Crystal microstructure - Doping (additives) - Eddy current testing Phase transitions - Powder metallurgy - Sintering
Uncontrolled terms: Changing temperature - Microstructure and properties - Room
temperature - Sintering process - Surface microstructures - VO2 - XRD
Classification code: 951 Materials Science - 933.1.1 Crystal Lattice - 811 Cellulose, Paper
and Wood Products - 801.4 Physical Chemistry - 801 Chemistry - 701.1 Electricity:
Basic Concepts and Phenomena - 536.1 Powder Metallurgy Operations - 536 Powder
Metallurgy - 415 Metals, Plastics, Wood and Other Structural Materials
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number: 20131516189229
Title: Effect of heat treatment on microstructure and properties ofcu-3ti-1al alloy
Authors: Wang, Xianhui1 ; Sun, Xiaochun1 ; Yang, Xiaohong1 ; Liang, Shuhua1/王献辉;;杨晓红;
梁淑华
Author affiliation: 1 School of Materials Science and Engineering, Xi'an University of
Technology, Xi'an, Shaanxi, 710048, China
Corresponding author: Wang, X. (xhwang693@xaut.edu.cn)
Source title: Materials Science Forum
Abbreviated source title: Mater. Sci. Forum
Volume: 749
Monograph title: Materials Performance, Modeling and Simulation
Issue date: 2013
Publication year: 2013
Pages: 282-286
Language: English
ISSN: 02555476
CODEN: MSFOEP
ISBN-13: 9783037856093
Document type: Conference article (CA)
Conference name: Chinese Materials Congress 2012, CMC 2012
Conference date: July 13, 2012 - July 18, 2012
Conference location: Taiyuan, China
Conference code: 96431
Sponsor: 667
Publisher: Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635, Switzerland
Abstract: The effect of heat treatment on the microstructure and properties of Cu-3Ti-1Al alloy
wasinvestigated. The microstructure was characterized by scanning electron microscope (SEM)
andtransmission electron microscope (TEM), and the hardness and electrical conductivity were
tested aswell. The results showed that the hardness and electrical conductivity of Cu-3Ti-1Al alloy
increasedsignificantly after solid solution and ageing treatment. The strengthening effect of
Cu-3Ti-1Al alloywas attributed to the formation of intermetallic phase such as Ti3Al and fine
precipitates of coherentβ′-Cu4Ti. With increase of the aging time and the temperature, the
precipitates became coarse andincoherent with Cu matrix, and the discontinuous precipitate β
started to grow from grain boundariestoward grain interior, which decreased hardness. As the
formation of Ti3Al, β-Cu3Ti and β′-Cu4Tiphase can efficiently reduce Ti concentration in Cu
matrix. The electrical conductivity of Cu-3Ti-1Alalloy increases. In the range of experiments, the
optimal heat treatment process for Cu-3Ti-1Al alloyis solid solution at 850°C for 4h and ageing
500°C for 2h, and the hardness and electrical conductivityare 227HV and 12.3%IACS, respectively.
© (2013) Trans Tech Publications, Switzerland.
Number of references: 17
Main heading: Titanium alloys
Controlled terms: Alloys - Aluminum - Cerium alloys - Computer simulation Electric conductivity - Hardness - Heat treatment - Microstructure - Precipitates
- Scanning electron microscopy
- Solid solutions
Uncontrolled terms: Ageing - Discontinuous precipitates - Effect of heat treatments Electrical conductivity - Heat treatment process - Intermetallic phase - Microstructure
and properties - Strengthening effect
Classification code: 933 Solid State Physics - 804 Chemical Products Generally - 741.1
Light/Optics - 723.5 Computer Applications - 701.1 Electricity: Basic Concepts and
Phenomena - 951 Materials Science - 547.2 Rare Earth Metals - 541.1 Aluminum 537.1 Heat Treatment Processes - 531.1 Metallurgy - 421 Strength of Building Materials;
Mechanical Properties - 542.3 Titanium and Alloys
DOI: 10.4028/www.scientific.net/MSF.749.282
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number: 20131516191859
Title: VLSI design of configurable integer pixel motion estimation with a reservoir architecture
Authors: Lu, Wei1 ; Yu, Ningmei1 ; Qu, Boqiang1 ; Ren, Ru1/路伟;余宁梅;;
Author affiliation: 1 School of Automation and Information Engineering, Xi'an University of
Technology, Xi'an 710048, China
Corresponding author: Yu, N. (yunm@xaut.edu.cn)
Source title: Journal of Computational Information Systems
Abbreviated source title: J. Comput. Inf. Syst.
Volume: 9
Issue: 4
Issue date: February 15, 2013
Publication year: 2013
Pages: 1315-1322
Language: English
ISSN: 15539105
Document type: Journal article (JA)
Publisher: Binary Information Press, P.O. Box 162, Bethel, CT 06801-0162, United States
Abstract: A scalable VLSI architecture for Variable Block Size Motion Estimation (VBSME) in
H.264/AVC based on a full-search motion estimation algorithm is proposed in this paper. Through
rational design for the data flow and processing module array, the memory traffic is reduced;
data reusability in vertical direction is improved. Furthermore, the number of processing element
is configured according to the area-speed requirement, data reusability in horizontal direction is
controlled, and fast matching in large searching window is realized. After logic synthesis using
SMIC 0.13μm standard cell library, the search window size is 32×32, the number of gates is 338K
(3PEs) in two-input equivalent NAND gates and the maximum operating clock frequency is 300
MHz (1920×1088@70fps). Copyright © 2013 Binary Information Press.
Number of references: 12
Main heading: Motion estimation
Controlled terms: Motion Picture Experts Group standards - Reusability
Uncontrolled terms: Integer pixel - Motion estimation algorithm - Processing elements
- Processing modules - Reservoir architecture - Variable block-size motion estimation Vertical direction - VLSI
Classification code: 452.3 Industrial Wastes - 716.1 Information Theory and Signal
Processing - 723.2 Data Processing and Image Processing
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number: 20131516199990
Title: Differential space time code for free space optical multiple input multiple output system
Authors: Chen, Juan1 ; Ke, Xizheng1 ; Cheng, Ting1/陈娟;柯熙政;;
Author affiliation: 1 School of Automation and Information Engineering, Xi'an University of
Technology, Xi'an, Shaanxi 710048, China
Corresponding author: Chen, J. (juan0110@126.com)
Source title: Guangxue Xuebao/Acta Optica Sinica
Abbreviated source title: Guangxue Xuebao
Volume: 33
Issue: 2
Issue date: February 2013
Publication year: 2013
Article number: 0206004
Language: Chinese
ISSN: 02532239
CODEN: GUXUDC
Document type: Journal article (JA)
Publisher: Chinese Optical Society, P.O. Box 80, Xi'an, 710068, China
Abstract: Laser is always affected by atmospheric turbulence in atmosphere transmission, and
channel estimation will become more difficult at poor atmospheric condition. According to Chadi
Abou-Rjeily's coding idea, introducing permutation matrix instead of negative form of symbols in
the real area Alamouti method, utilizing binary pulse position modulation, a differential
space-time code scheme that does not require channel estimates for free space optical
communication is proposed. The simulation results show that, compared with Alamouti coding
which requires channel estimates, this method can obtain the same diversity gain. At the same
time, it is relatively simple and more feasible in practice.
Number of references: 18
Main heading: Channel coding
Controlled terms: Atmospheric turbulence - MIMO systems - Modulation - Optical
communication - Pulse position modulation
Uncontrolled terms: Alamouti coding - Atmospheric conditions - Binary pulse position
modulation - Channel estimate - Differential space-time codes - Free Space Optical
communication - Free-space optical - Permutation matrix
Classification code: 443.1 Atmospheric Properties - 716 Telecommunication; Radar, Radio
and Television - 716.1 Information Theory and Signal Processing - 717.1 Optical
Communication Systems - 961 Systems Science
DOI: 10.3788/AOS201333.0206004
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number: 20131516189190
Title: Preparation of tungsten-copper composite powder by electroless plating
Authors: Wang, Ying1 ; Zou, Juntao1 ; Zhang, Qinghe1/;邹军涛;
Author affiliation: 1 School of Materials Science and Engineering, Xi'an University of
Technology, Shaanxi Province, Xi'an 710048, China
Corresponding author: Wang, Y. (Ying.gongzuo@163.com)
Source title: Materials Science Forum
Abbreviated source title: Mater. Sci. Forum
Volume: 749
Monograph title: Materials Performance, Modeling and Simulation
Issue date: 2013
Publication year: 2013
Pages: 28-34
Language: English
ISSN: 02555476
CODEN: MSFOEP
ISBN-13: 9783037856093
Document type: Conference article (CA)
Conference name: Chinese Materials Congress 2012, CMC 2012
Conference date: July 13, 2012 - July 18, 2012
Conference location: Taiyuan, China
Conference code: 96431
Sponsor: 667
Publisher: Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635, Switzerland
Abstract: In this paper, tungsten-copper composite powder was prepared on the particle size of
6 ~ 10μm tungsten powder surface by electroless copper plating. The orthogonal experimental
results show that the primary and secondary order of factors affecting the deposition rate
followwing the sequence: copper sulfate solution concentration > pH value> solution
temperature> formaldehyde concentration > complexing agent concentration. The process of the
electroless copper plating on the tungsten powder surface was investigated, and the best
electroless copper plating solution composition and operation conditions were obtained as
follows: plating temperature 323 K, stirring speed 30 r/min, PH =13, loadage 8g/L, CuSO4&bull
5H2O 0.032 mol/L, HCHO 0.274 mol/L, TEA 0.1208 mol/L, 2, 2 'league pyridine 12 mg/L. © (2013)
Trans Tech Publications, Switzerland.
Number of references: 10
Main heading: Tungsten compounds
Controlled terms: Computer simulation - Copper plating - Deposition - Deposition
rates - Electroless plating - Tungsten alloys
Uncontrolled terms: Complexing agents - Electroless copper plating - Formaldehyde
concentrations - Operation conditions - Orthogonal experimental - Solution
temperature - Tungsten powders - Tungsten-copper composites
Classification code: 539.3 Metal Plating - 539.3.2 Electroless Plating - 543.5 Tungsten
and Alloys - 617 Turbines and Steam Turbines - 723.5 Computer Applications - 804.1
Organic Compounds
DOI: 10.4028/www.scientific.net/MSF.749.28
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
10.
Accession number: 20131516191972
Title: Study of artificial structural loess under the true triaxial tests
Authors: Chen, Chang-Lu1 ; Juan, Fang1 ; Luo, Ai-Zhong1 ; Shao, Sheng-Jun2/陈昌禄;;;邵生俊
Author affiliation: 1 Bijie University, Bijie Guizhou 551700, China
2 Xi'an University of Technology, Xi'an Shaaxi 710048, China
Corresponding author: Chen, C.-L. (chenclu@qq.com)
Source title: Advanced Materials Research
Abbreviated source title: Adv. Mater. Res.
Volume: 671-674
Monograph title: Construction and Urban Planning
Issue date: 2013
Publication year: 2013
Pages: 343-348
Language: English
ISSN: 10226680
ISBN-13: 9783037856611
Document type: Conference article (CA)
Conference name: 2013 International Conference on Structures and Building Materials, ICSBM
2013
Conference date: March 9, 2013 - March 10, 2013
Conference location: Guizhou, China
Conference code: 96430
Publisher: Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany
Abstract: Structure characteristic is the essential property of natural soils. The paper developed
an indoor method of artificial structural loess, and studied on the true triaxial tests of artificial
structural loess on the base of improving the original true triaxial apparatus. The results show
that it is reasonably reliable of this artificial method. At the same time, the variation of failure
strength and residual strength of structural loess under complex stress conditions was analysised.
When the confining pressure was less than the structural strength of the structural loess, the
stress-strain curve was soften, on the contrary the stress-strain curve was harden. In the end the
paper analyzed that Mohr-Coulomb strength criterion was accurately to describe the residual
strength variation of structural loess but there has much error in describing the peak broken
strength, the value was obviously small. © (2013) Trans Tech Publications, Switzerland.
Number of references: 16
Main heading: Sediments
Controlled terms: Soil testing - Stress-strain curves - Urban planning
Uncontrolled terms: Artificial preparation - Complex stress condition - Mohr-Coulomb
strength criterion - Strength variation - Structural loess - Structure characteristic True triaxial apparatus - True triaxial tests
Classification code: 403.1 Urban Planning and Development - 421 Strength of Building
Materials; Mechanical Properties - 483 Soil Mechanics and Foundations - 483.1 Soils and
Soil Mechanics - 921 Mathematics
DOI: 10.4028/www.scientific.net/AMR.671-674.343
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
11.
Accession number: IP52521846
Article in Press
Title: Preferential water and solute transport through sandy soil containing artificial
macropores
Authors: Zhou, B.B.1, 2 ; Li, Y.2 ; Wang, Q.J.1, 2 ; Jiang, Y.L.1 ; Li, S.2/;;王全九;;
Author affiliation: 1 Institute of Water Resources and Hydro-electric Engineering, Xi'an
University of Technology, Xi'an, 710048, China
2 State Key Laboratory of Soil Erosion and Dryland Farming on the Loess Plateau, Institute of
Soil and, Northwest A and F University, Yangling, 712100, China
Corresponding author: Wang, Q.J. (wquanjiu@163.com)
Source title: Environmental Earth Sciences
Abbreviated source title: Environ. Earth Sci.
Issue date: 2013
Publication year: 2013
Pages: 1-9
Language: English
ISSN: 18666280
E-ISSN: 18666299
Document type: Article in Press
Abstract: Macropores resulting from soil pedogenesis and biological activity play important
roles in soil water and chemical transport. Numerous studies have examined individual
macropores and the effects of their size on solute transport, but few have assessed the effects of
macropore continuity and of neighboring macropores. This paper describes a laboratory
investigation of the effects of macropores, with varying degrees and types of continuity, on the
transport and distribution of solutes in a sandy soil from the northern Loess Plateau, China.
Breakthrough curves were obtained from 60 cm tall, 2-D columns containing standardized
artificial macropores using an input solution of 1,190 mg/L KBr and 100 mg/L FD&C Blue #1
under a constant hydraulic head of 8 cm. The types of macropore were: open at both the surface
and bottom of the soil column (O-O); open at the surface, closed at the bottom (O-C); and closed
at the surface, open at the bottom (C-O). Columns with no macropores served as a control. In the
O-O columns the solution reached the bottom 10-50 times faster than in any other treatment,
bypassing most of the soil matrix. The presence of an O-C macropore resulted in weak
retardation and much deeper penetration of the bromide and FD&C Blue #1 solution than in the
control columns. However, the C-O macropore had little effect on either breakthrough curves or
solute distributions. In further experiments that considered neighboring macropores effects, an
inclined macropore strongly affected solute concentrations in the profile around a nearby vertical
macropore. It was concluded that the length, type and position of single macropores, and the
presence of neighboring macropores, all affect soil water flow and solute infiltration parameters
in a sandy loam soil. © 2013 Springer-Verlag Berlin Heidelberg.
Number of references: 25
Main heading: Solute transport
Controlled terms: Bioactivity - Finite difference method - Sand - Soil moisture
Uncontrolled terms: Break through curve - Chemical transport - Distribution of solute
- Infiltration parameters - Laboratory investigations - Soil water flows - Solute
concentrations - Solute distribution
Classification code: 461.6 Medicine and Pharmacology - 483.1 Soils and Soil Mechanics 921.6 Numerical Methods
DOI: 10.1007/s12665-013-2339-6
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
12.
Accession number: 20131516189211
Title: Study on the interface diffusion bonding of the copper alloy/30CrMnSi steel
Authors: Zou, Juntao1 ; Liu, Yanfeng2 ; Pei, Lu1 ; Wang, Xianhui1 ; Liang, Shuhua1/邹军涛;刘艳
峰;;王献辉;梁淑华
Author affiliation: 1 School of Materials Science and Engineering, Xi'an University of
Technology, Xi'an 710048, China
2 Department of Chemistry and Chemical Engineering, Shangluo University, Shangluo 726000,
China
Corresponding author: Zou, J. (zoujt077@163.com)
Source title: Materials Science Forum
Abbreviated source title: Mater. Sci. Forum
Volume: 749
Monograph title: Materials Performance, Modeling and Simulation
Issue date: 2013
Publication year: 2013
Pages: 168-172
Language: English
ISSN: 02555476
CODEN: MSFOEP
ISBN-13: 9783037856093
Document type: Conference article (CA)
Conference name: Chinese Materials Congress 2012, CMC 2012
Conference date: July 13, 2012 - July 18, 2012
Conference location: Taiyuan, China
Conference code: 96431
Sponsor: 667
Publisher: Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635, Switzerland
Abstract: The copper alloy/30CrMnSi steel bi-metal composite materials were prepared by the
interface diffusion bonding method. The diffusion of elements close to the bonding interface was
studied and the formation and growth mechanism of dissolution layer were discussed as well.
The results showed that a diffusion transition layer could be formed with the different widths for
copper alloy/30CrMnSi steel integrated material. A diffusion transition layer was formed close to
30CrMnSi steel side due to the inter-diffusion of the alloy elements. The microstructure
characterization showed that no harmful brittle phase presented around the interface, and two
heterogeneous materials had a good metallurgical bonding. © (2013) Trans Tech Publications,
Switzerland.
Number of references: 14
Main heading: Interfaces (materials)
Controlled terms: Alloy steel - Characterization - Computer simulation - Copper Copper alloys - Diffusion - Diffusion bonding
Uncontrolled terms: 30CrMnSi steels - Diffusion transition - Heterogeneous materials
- Integrated materials - Interface diffusion - Metallurgical bonding - Microstructure
characterization - Transition layers
Classification code: 951 Materials Science - 931.1 Mechanics - 812.1 Ceramics 723.5 Computer Applications - 545.3 Steel - 544.2 Copper Alloys - 544.1 Copper
DOI: 10.4028/www.scientific.net/MSF.749.168
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
13.
Accession number: 20131516189236
Title: Investigation on the preparation and properties of mocu gradientmaterial
Authors: Yang, Xiaohong1 ; Zhang, Nina1 ; Xiao, Peng1 ; You, Caiyin1/杨晓红;张妮娜;肖鹏;游才
印
Author affiliation: 1 School of Materials Science and Engineering, Xi'an University of
Technology, Xi'an 710048, China
Corresponding author: Yang, X. (yangxh@xaut.edu.cn)
Source title: Materials Science Forum
Abbreviated source title: Mater. Sci. Forum
Volume: 749
Monograph title: Materials Performance, Modeling and Simulation
Issue date: 2013
Publication year: 2013
Pages: 322-327
Language: English
ISSN: 02555476
CODEN: MSFOEP
ISBN-13: 9783037856093
Document type: Conference article (CA)
Conference name: Chinese Materials Congress 2012, CMC 2012
Conference date: July 13, 2012 - July 18, 2012
Conference location: Taiyuan, China
Conference code: 96431
Sponsor: 667
Publisher: Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635, Switzerland
Abstract: In this study, MoCu gradient materials were prepared by the combination methods of
liquidphase sintering and permeability copper. The effect of pressure and sintering temperature
on theproperties of MoCu gradient materials was studied. The physical and mechanical
properties ofMoCu20/MoCu40 and MoCu20/MoCu30/MoCu40 gradient materials were tested
respectively. Theresults showed that the relative density of green compact and sintered gradient
materials increasedwith the increase of pressing force from 10 tons to 30 tons. The electrical
conductivity and hardness ofsintered compact achieved the maximum value by the 20 tons.
Within the sintering temperature rangeof 1100°C to 1400°C, the relative density, electrical
conductivity and hardness of sintered gradientmaterials increased with the increase of sintering
temperature. The overall properties of sinteredmaterials were obtained at 1350°C. For two-layer
and three-layer MoCu gradient materials, theirmicrostructures and chemical compositions
showed a continuously and gradient change. The bendingstrength and the thermal conductivity
of three-layer MoCu gradient materials were better than that oftwo-layer gradient materials. ©
(2013) Trans Tech Publications, Switzerland.
Number of references: 11
Main heading: Sintering
Controlled terms: Computer simulation - Electric conductivity - Hardness - Materials
- Thermal conductivity
Uncontrolled terms: Chemical compositions - Combination method - Electrical
conductivity - Gradient materials - Overall properties - Physical and mechanical
properties - Preparation and properties - Sintering temperatures
Classification code: 536.1 Powder Metallurgy Operations - 641.2 Heat Transfer - 701.1
Electricity: Basic Concepts and Phenomena - 723.5 Computer Applications - 951 Materials
Science
DOI: 10.4028/www.scientific.net/MSF.749.322
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
14.
Accession number: 20131516182694
Title: Superplastic behavior of reciprocating extruded Mg-6Zn-1Y-0.6Ce-0.6Zr from rapidly
solidified ribbons
Authors: Guo, Xuefeng1 ; Yang, Wenpeng1, 2 ; Ren, Fang3/郭学峰;杨文鹏;
Author affiliation: 1 School of Materials Science and Engineering, Henan Polytechnic
University, Jiaozuo 454000, China
2 School of Materials Science and Engineering, Xi'An University of Technology, Xi'an 710048,
China
3 School of Economics and Management, Henan Polytechnic University, Jiaozuo 454000, China
Corresponding author: Guo, X. (guoxuef@gmail.com)
Source title: Journal Wuhan University of Technology, Materials Science Edition
Abbreviated source title: J Wuhan Univ Technol Mater Sci Ed
Volume: 27
Issue: 6
Issue date: December 2012
Publication year: 2012
Pages: 1033-1037
Language: English
ISSN: 10002413
CODEN: JWUTE8
Document type: Journal article (JA)
Publisher: Wuhan Ligong Daxue, 122, Luoshi Road Wuhan Hubei, 430070, China
Abstract: RRE-Mg66 alloy with a composition of Mg-6.0%Zn-1.0%Y-0.6%Ce-0.6Zr was prepared
by combinatorial processes of rapid solidification, reciprocating extrusion and extrusion.
Microstructure was evaluated on SEM and TEM. The average grain size of the alloy is 0.7 μm, the
size of the second phase at grain boundary is 0.15 μm, and the size of the intragranular
precipitates in round shape is less than 20 nm. Superplastic behavior of the material was
investigated in a temperature range of 150 to 250 C and initial strain rate range of 3.3×10-4 to
3.3×10-2 s-1 in air. The highest elongation of 270% was obtained at 250 C and 3.3× 10-3 s-1.
High-strain-rate superplasticity and low-temperature superplasticity were achieved. The
superplasticity results from intragranular sliding (IGS) at temperatures from 170 to < 200 C and
grain boundaries sliding (GBS) at 250 C. At 200 C a combination of IGS and GBS contributes to the
superplastic flow. © 2012 Wuhan University of Technology and Springer-Verlag Berlin Heidelberg.
Number of references: 18
Main heading: Rapid solidification
Controlled terms: Extrusion - Grain boundaries - Strain rate - Superplasticity Zinc - Zirconium
Uncontrolled terms: Average grain size - Grain boundaries sliding - High-strain-rate
superplasticity - Intragranular precipitates - Low temperature superplasticity - Rapidly
solidified - Reciprocating extrusion - Superplastic behavior
Classification code: 933.1 Crystalline Solids - 933 Solid State Physics - 549.3 Nonferrous
Metals and Alloys excluding Alkali and Alkaline Earth Metals - 546.3 Zinc and Alloys 535.2.2 Metal Forming Practice - 531.2 Metallography - 531 Metallurgy and
Metallography - 422 Strength of Building Materials; Test Equipment and Methods - 421
Strength of Building Materials; Mechanical Properties
DOI: 10.1007/s11595-012-0595-z
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
15.
Accession number: 20131516200094
Title: Effect of rainfall on wireless laser communication
Authors: Zhu, Yaolin1, 2 ; An, Ran2 ; Ke, Xizheng1/朱耀麟;安然;柯熙政
Author affiliation: 1 Faculty of Automation and Information Engineering, Xi'an University of
Technology, Xi'an, Shaanxi 710048, China
2 Electronic Information College, Xi'an Polytechnic University, Xi'an, Shaanxi 710048, China
Corresponding author: An, R. (anmaoran@163.com)
Source title: Guangxue Xuebao/Acta Optica Sinica
Abbreviated source title: Guangxue Xuebao
Volume: 32
Issue: 12
Issue date: December 2012
Publication year: 2012
Article number: 1206003
Language: Chinese
ISSN: 02532239
CODEN: GUXUDC
Document type: Journal article (JA)
Publisher: Chinese Optical Society, P.O. Box 80, Xi'an, 710068, China
Abstract: In the experiments of laser signal transport in rain medium, it is obvious that the
transmission in heavy rain is bigger than that in light rain. This shows that the attenuation of light
signal in light rain is bigger than that in heavy rain. The transmission attenuation of wireless laser
communication in rain is noticeable. According to the theory of Mie and Weibull raindrop
spectrum, the effects of the particle scales on laser scattering and attenuation efficiency factor
are analyzed, and the attenuation formula of the light wave of a single particle is deduced. The
definite equations between the attenuation and the rainfall ratio are obtained. The result shows
that scattering intensity of particle in heavy rain is bigger than that in light rain in forward
direction, and the forward scattering intensity increases. When laser signal transmits through rain,
attenuation coefficient in light rain is big, while it is small in moderate rain and heavy rain, and
increases in rainstorm. This result coincides with the facts. Attenuation characteristic of laser in
rain provides theoretical basis for laser applied in the communication system working in the rain.
Number of references: 9
Main heading: Rain
Controlled terms: Drops - Forward scattering - Laser theory - Optical communication
- Storms
Uncontrolled terms: Efficiency factor - Mie theory - Raindrop spectra - Rainfall
attenuations - Scattering light
Classification code: 443 Meteorology - 711 Electromagnetic Waves - 717.1 Optical
Communication Systems - 744.1 Lasers, General
DOI: 10.3788/AOS201232.1206003
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
20130426 新增 13 条
1.
Accession number: 20131616218912
Title: Improvement of corrosion performance of MAO coated AZ31 magnesium alloy by
polypropylene post-treatment
Authors: Chen, M.-A.1 ; Xiao, C.1 ; Li, J.-M.2/;;
Author affiliation: 1 School of Materials Science and Engineering, Central South University,
Changsha 410083, China
2 School of Materials Science and Engineering, Xi'An University of Technology, Xi'an 710048,
China
Corresponding author: Chen, M.-A. (ma-chen@csu.edu.cn)
Source title: Transactions of the Institute of Metal Finishing
Abbreviated source title: Trans Inst Met Finish
Volume: 91
Issue: 2
Issue date: March 2013
Publication year: 2013
Pages: 80-87
Language: English
ISSN: 00202967
E-ISSN: 17459192
CODEN: TIMFA2
Document type: Journal article (JA)
Publisher: Maney Publishing, Suite 1C, Joseph's Well, Hanover Walk, Leeds, LS3 1AB, United
Kingdom
Abstract: In order to improve the corrosion resistance provided by a micro-arc oxidation (MAO)
coating on AZ31 magnesium alloy, a polypropylene film was prepared on its surface. Scanning
electron microscopy, energy dispersive X-ray analysis and Fourier transform infrared spectroscopy
were used to characterise the surfaces of the coatings. The corrosion protective performance of
the coatings was evaluated by potentiodynamic polarisation curves, electrochemical impedance
spectroscopy and immersion testing. The results show that the microdefects of the MAO coating
can be filled by PP and the corrosion resistance of the AZ31 magnesium alloy is improved greatly.
© 2013 Institute of Metal Finishing.
Number of references: 29
Main heading: Polypropylenes
Controlled terms: Coatings - Corrosion - Corrosion resistance - Electrochemical
impedance spectroscopy - Fourier transform infrared spectroscopy - Magnesium alloys Plastic films - Scanning electron microscopy
Uncontrolled terms: AZ31 magnesium alloy - Corrosion performance - Energy dispersive
x-ray - Immersion testing - Microarc oxidation - Poly-propylene film - Post
treatment - Protective performance
Classification code: 817.1 Polymer Products - 815.1.1 Organic Polymers - 801 Chemistry
- 741.1 Light/Optics - 542.2 Magnesium and Alloys - 539.1 Metals Corrosion - 539
Metals Corrosion and Protection; Metal Plating
DOI: 10.1179/0020296712Z.00000000086
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number: 20131616213334
Title: Performance research on the non-clipped QPSK sine-like modulation of atmospheric laser
communication system
Authors: Deng, Lijun1 ; Ke, Xizheng1 ; Shi, Weijian1/邓莉君;柯熙政;史炜坚
Author affiliation: 1 College of Automation and Information Engineering, Xi'an University of
Technology, Xi'an, Shaanxi 710048, China
Corresponding author: Deng, L. (denglj@xaut.edu.cn)
Source title: Zhongguo Jiguang/Chinese Journal of Lasers
Abbreviated source title: Zhongguo Jiguang
Volume: 40
Issue: 2
Issue date: February 2013
Publication year: 2013
Article number: 0205001
Language: Chinese
ISSN: 02587025
CODEN: ZHJIDO
Document type: Journal article (JA)
Publisher: Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China
Abstract: A non-clipped quadrature phase shift keying (QPSK) sine-like modulation technology
is proposed in this paper and applied to the atmospheric laser communication system. The
atmospheric laser communication channel model is introduced and the atmospheric laser
communication system model of non-clipped QPSK sine-like modulation is given. Based on there,
the power efficiency, bit error rate (BER), outage probability and channel capacity of atmospheric
laser communication systems which adopt non-clipped QPSK sine-like modulation and direct
current bias sub-carrier intensity modulation are compared and analyzed. The results
demonstrate that the proposed scheme has better anti-noise performance, higher power
utilization, lower outage probability and higher channel capacity, and improves the performance
of atmospheric laser communication system. The scheme can satisfy the requirements of
atmospheric laser communication system.
Number of references: 19
Main heading: Quadrature phase shift keying
Controlled terms: Channel capacity - Electric power utilization - Integrated optics Modulation - Optical communication - Outages - Telecommunication systems
Uncontrolled terms: Atmospheric laser communications - Direct current bias - Intensity
modulations - Modulation technologies - Outage probability - Performance research
- Power efficiency - Quadrature phaseshift keying (QPSK)
Classification code: 706.1 Electric Power Systems - 716 Telecommunication; Radar, Radio
and Television - 716.1 Information Theory and Signal Processing - 717.1 Optical
Communication Systems - 741.3 Optical Devices and Systems
DOI: 10.3788/CJL201340.0205001
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number: 20131516204320
Title: Alternate dual pulses technique for fiber Bragg grating Ultra-multi-point strain
measurement
Authors: Gong, Xin1 ; Hua, Dengxin1 ; Zhang, Pengbo1 ; Hu, Liaolin1 ; Wang, Yufeng1/巩鑫;华
灯鑫;章鹏博;胡辽林;王玉峰
Author affiliation: 1 School of Mechanical and Precision Instrument Engineering, Xi'An
University of Technology, Xi'an 710048, China
Corresponding author: Hua, D. (dengxinhua@xaut.edu.cn)
Source title: Proceedings of SPIE - The International Society for Optical Engineering
Abbreviated source title: Proc SPIE Int Soc Opt Eng
Volume: 8759
Monograph title: Eighth International Symposium on Precision Engineering Measurements and
Instrumentation
Issue date: 2013
Publication year: 2013
Article number: 875927
Language: English
ISSN: 0277786X
CODEN: PSISDG
ISBN-13: 9780819495501
Document type: Conference article (CA)
Conference name: 8th International Symposium on Precision Engineering Measurements and
Instrumentation
Conference date: August 8, 2012 - August 11, 2012
Conference location: Chengdu, China
Conference code: 96463
Sponsor: International Committee on Measurements and Instrumentation; National Natural
Science Foundation of China; Chinese Society for Measurement; China Instrument and Control
Society
Publisher: SPIE, P.O. Box 10, Bellingham, WA 98227-0010, United States
Abstract: The research of ultra-multi-point strain detection is one of the important topics at the
forefront of optical fiber sensing technology. A newly ultra-multi-point strain measurement
system was designed based on optical time-domain reflectometry (OTDR) and Fiber Bragg
Grating. Two distributed feedback (DFB) lasers is proposed as laser source to generate the
alternately pulsed light, and transmitted to a serial of fiber Bragg gratings with the same
low-reflectivity and bandwidth. By the means of the strength of each reflectance spectrum and
its return time of signals, the magnitude and location of strain can be accurately determined, and
the numerical simulation shows that more than 1000 FBGs can be multiplexed in OTDR-FBG
strain measurement system for a larger strain measurement range. Furthermore, the
corresponding driving circuits for nanosecond pulse and temperature control circuits are
designed for laser pulse modulation and frequency stabilization control. A OTDR-FBG strain
measurement system is developed by using 10 FBGs with the reflectivity of less than 5%, and the
system distance resolution of 43 cm is obtained, which verified the feasibility of the system. ©
2013 SPIE.
Number of references: 12
Main heading: Fiber Bragg gratings
Controlled terms: Distributed feedback lasers - Fibers - Measurements - Precision
engineering - Pulsed lasers - Reflection - Strain measurement
Uncontrolled terms: Distance resolution - Frequency stabilization - Multi-points Optical fiber sensing technology - Optical time domain reflectometry - OTDR Reflectance spectrum - Temperature control circuit
Classification code: 943.2 Mechanical Variables Measurements - 943 Mechanical and
Miscellaneous Measuring Instruments - 942 Electric and Electronic Measuring Instruments 941 Acoustical and Optical Measuring Instruments - 944 Moisture, Pressure and Temperature,
and Radiation Measuring Instruments - 817 Plastics and Other Polymers: Products and
Applications - 744.1 Lasers, General - 741.3 Optical Devices and Systems - 711
Electromagnetic Waves - 812 Ceramics, Refractories and Glass
DOI: 10.1117/12.2014592
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number: 20131616214026
Title: Robust filter algorithm of carrier tracking loop for GPS software receiver
Authors: Li, Jiang1 ; Qian, Fu-Cai1, 2 ; Liu, Ding1/李江;钱富才;刘丁
Author affiliation: 1 School of Automation and Information Engineering, Xi'an University of
Technology, Xi'an Shaanxi 710048, China
2 State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an
Shaanxi 710054, China
Corresponding author: Li, J. (lijiang0613@163.com)
Source title: Kongzhi Lilun Yu Yingyong/Control Theory and Applications
Abbreviated source title: Kong Zhi Li Lun Yu Ying Yong
Volume: 30
Issue: 2
Issue date: February 2013
Publication year: 2013
Pages: 208-214
Language: Chinese
ISSN: 10008152
CODEN: KLYYEB
Document type: Journal article (JA)
Publisher: South China University of Technology, Guangzhou, 510640, China
Abstract: The inhibition of the loop filter noise jitter is an important guarantee for precise
continuous tracking of the satellite signal in global positioning system (GPS) software receiver.
This paper uses the noise unknown but bounded assumptions, instead of the demanding
requirements of the noise statistical properties known in the traditional methods. The application
of semidefinite programming approach converts the filtering problem into a convex optimization
problem. Adopting the carrier tracking loop robust filtering algorithm to obtain the confidence
ellipsoid containing the Doppler shift, we solve the filter tracking problem for GPS receiver in the
complex and changing environment. The algorithm is validated by using the analog carrier signal
and the actual satellite signal. Results show this method effectively tracks the GPS satellite signals
and provides a new way of thinking for designing the loop filter for GPS receivers.
Number of references: 16
Main heading: Global positioning system
Controlled terms: Algorithms - Convex optimization - Satellites - Signal receivers Tracking (position)
Uncontrolled terms: Carrier tracking loop - Changing environment - Convex optimization
problems - Gps software receivers - Robust filters - Semi-definite programming Statistical properties - Unknown but bounded
Classification code: 921.5 Optimization Techniques - 921 Mathematics - 723.1 Computer
Programming - 723 Computer Software, Data Handling and Applications - 718 Telephone
Systems and Related Technologies; Line Communications - 717 Optical Communication 716 Telecommunication; Radar, Radio and Television - 655.2.1 Communication Satellites 655.2 Satellites
DOI: 10.7641/CTA.2013.20323
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number: 20131616213738
Title: Synthesis and photocatalytic activity of reticular Bi2O3 photocatalysts
Authors: Ma, Zhan-Ying1, 2 ; Yao, Bing-Hua1 ; He, Yang-Qing1 ; Bai, Hai-Ni3 ; Gao, Yi-Hong2/马
占营;姚秉华;何仰清;白海妮;高奕红
Author affiliation: 1 Department of Applied Chemistry, Xi'an University of Technology, Xi'an
710054, China
2 College of Chemistry and Chemical Engineering, Xianyang Normal University, Xianyang
712000, China
3 Physical and Chemical Office, Shaanxi Huaxing Electronic Industry Company, Xianyang 712009,
China
Corresponding author: Yao, B.-H.
Source title: Gongneng Cailiao/Journal of Functional Materials
Abbreviated source title: Gongneng Cailiao
Volume: 44
Issue: 4
Issue date: February 28, 2013
Publication year: 2013
Pages: 507-511+516
Language: Chinese
ISSN: 10019731
CODEN: GOCAEA
Document type: Journal article (JA)
Publisher: Journal of Functional Materials, P.O. Box 1512, Chongqing, 630700, China
Abstract: The reticular Bi2O3 photocatalysts were synthesized via heat treatment process using
cotton as template. XRD, SEM, TGA, UV-Vis diffusion spectra were employed to characterize the
phase structure, morphology, thermal stability and optical absorption properties of the samples.
Results indicated that cotton played an important role in the formation of reticular structure. The
flat Bi2O3 reticles with different diameter were staggered and overlapped, thus reticular Bi2O3
were formed. Using the degradation of MB as a model reaction, the photocatalytic and recycling
properties of the reticular Bi2O3 were compared with Bi2O3 powders. Results indicated that the
reticular structure materials showed better photocatalytic properties than Bi2O3 powders. The
decolorization efficiency of MB solution reached about 93% at irradiation time 100min and
remained above 85% upon repetition (4 times). In addition, the formation mechanism of reticular
Bi2O3 was discussed in detail.
Number of references: 13
Main heading: Photocatalysts
Controlled terms: Cotton - Photocatalysis - Powders - Synthesis (chemical)
Uncontrolled terms: Cotton-template - Diffusion spectra - Formation mechanism Heat treatment process - Optical absorption properties - Photocatalytic activities Photocatalytic property - Structure materials
Classification code: 536 Powder Metallurgy - 802.2 Chemical Reactions - 803 Chemical
Agents and Basic Industrial Chemicals - 804 Chemical Products Generally - 819.1 Natural
Fibers
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number: 20131516202126
Title: LOSOM: Phase relief imaging can be achieved with confocal system
Authors: Peng, Tong1, 2 ; Xie, Hao1 ; Ding, Yichen1 ; Lu, Yiqing3 ; Jin, Dayong3 ; Xi, Peng1/彭
彤;;;;
Author affiliation: 1 Department of Biomedical Engineering, College of Engineering, Peking
University, No. 5 Yiheyuan Road, Beijing 100871, China
2 Department of Physics, Xi'an University of Technology, No. 5 South Jinhua Road, Xi'an 710048,
China
3 Advanced Cytometry Labs., MQphotonics Research Centre, Macquarie University, Sydney,
NSW 2109, Australia
Corresponding author: Xi, P.
Source title: Progress in Biomedical Optics and Imaging - Proceedings of SPIE
Abbreviated source title: Progr. Biomed. Opt. Imaging Proc. SPIE
Volume: 8553
Monograph title: Optics in Health Care and Biomedical Optics V
Issue date: 2012
Publication year: 2012
Article number: 85531C
Language: English
ISSN: 16057422
ISBN-13: 9780819493088
Document type: Conference article (CA)
Conference name: Optics in Health Care and Biomedical Optics V
Conference date: November 5, 2012 - November 7, 2012
Conference location: Beijing, China
Conference code: 96406
Sponsor: The Society of Photo-Optical Instrumentation Engineers (SPIE); COS - Chinese Optical
Society
Publisher: SPIE, P.O. Box 10, Bellingham, WA 98227-0010, United States
Abstract: We reported recently that laser oblique scanning optical microscopy (LOSOM) is able
to obtain a relief image in transparent sample directly. To optimize the performance of LOSOM,
the parameters such as numerical aperture, the distance between the specimen and the
fluorescent medium and the pinhole size are investigated in this work. A beam blocker is
introduced in light path which enhances dramatically the visualization of local phase difference.
© Copyright SPIE.
Number of references: 10
Main heading: Optics
Controlled terms: Health care
Uncontrolled terms: Local phase - Numerical aperture - Relief imaging - Scanning
optical microscopy
Classification code: 461.7 Health Care - 741.1 Light/Optics
DOI: 10.1117/12.2000809
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number: 20131516204380
Title: Comparison of fringe imaging techniques using Mach-Zehnder and Fabry-Perot
interferometer for molecular Doppler wind lidar
Authors: Tan, Linqiu1 ; Hua, Dengxin1 ; Wang, Li1 ; Wang, Yufeng1/;华灯鑫;汪丽;王玉峰;
Author affiliation: 1 School of Mechanical and Precision Instrument Engineering, Xi'An
University of Technology, Xi'an 710048, China
Corresponding author: Hua, D. (dengxinhua@xaut.edu.cn)
Source title: Proceedings of SPIE - The International Society for Optical Engineering
Abbreviated source title: Proc SPIE Int Soc Opt Eng
Volume: 8759
Monograph title: Eighth International Symposium on Precision Engineering Measurements and
Instrumentation
Issue date: 2013
Publication year: 2013
Article number: 87593V
Language: English
ISSN: 0277786X
CODEN: PSISDG
ISBN-13: 9780819495501
Document type: Conference article (CA)
Conference name: 8th International Symposium on Precision Engineering Measurements and
Instrumentation
Conference date: August 8, 2012 - August 11, 2012
Conference location: Chengdu, China
Conference code: 96463
Sponsor: International Committee on Measurements and Instrumentation; National Natural
Science Foundation of China; Chinese Society for Measurement; China Instrument and Control
Society
Publisher: SPIE, P.O. Box 10, Bellingham, WA 98227-0010, United States
Abstract: The fringe-imaging Fabry-Perot (FIFP) interferometer and fringe-imaging
Mach-Zehnder (FIMZ) interferometer as frequency discriminator for incoherent molecular
Doppler wind lidar are proposed, analyzed and compared theoretically respectively. Using ZEMAX
software, the FIFP interferometer and FIMZ interferometer are designed and simulated
respectively. Compared with Fabry-Perot interferometer (FPI), Mach-Zehnder interferometer
(MZI) produces equidistant linear parallel fringes instead of circular rings. The record of the MZI
fringe pattern is noticeably easier than that of the FPI and can be performed with a cylindrical
lens and focused on a linear CCD array rather than a complex circle to line interferometer optical
(CLIO) system. According to the U.S. standard atmospheric model, the transmission,
signal-to-noise ratio (SNR), sensitivity and wind error for FIFP and FIMZ systems are simulated
respectively. The results show that, the MZI sensitivity is lower than that of FPI, however, the MZI
offers 4 times higher transmission, resulting to about 1.4 times smaller wind error in the
line-of-sight (LOS) velocity component than that of FIFP. In addition, the MZI can be designed
with a compensated field to accept sources of appreciable dimensions without significant
performance reduction, which will provide an effective technique for Doppler wind lidar to
improve the accuracy of wind velocity measurement by using MZI as frequency discriminator. ©
2013 SPIE.
Number of references: 10
Main heading: Fabry-Perot interferometers
Controlled terms: Acoustic wave velocity measurement - Charge coupled devices Computer simulation - Imaging techniques - Lenses - Measurements - Optical
radar - Precision engineering
Uncontrolled terms: Doppler lidars - Fabry-Perot - Frequency discriminators Mach-Zehnder - Wind velocity measurement
Classification code: 944 Moisture, Pressure and Temperature, and Radiation Measuring
Instruments - 943 Mechanical and Miscellaneous Measuring Instruments - 942 Electric
and Electronic Measuring Instruments - 941 Acoustical and Optical Measuring Instruments 746 Imaging Techniques - 741.3 Optical Devices and Systems - 741 Light, Optics and
Optical Devices - 723.5 Computer Applications - 714.2 Semiconductor Devices and
Integrated Circuits
DOI: 10.1117/12.2014822
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number: 20131616213976
Title: Divided screen array measurement method of projectile-curtain parameter for
multibarrel volleyed weapons
Authors: Tian, Hui1, 2 ; Jiao, Mingxing1 ; Ni, Jinping2 ; Wang, Guohui2/田会;焦明星;倪晋平;王
国珲
Author affiliation: 1 School of Mechanical Instrumental Engineering, Xi'an University of
Technology, Xi'an 710048, China
2 Shaanxi Province Key Lab of Photoelectric Measurement and Instrument Technology, Xi'an
Technological University, Xi'an 710032, China
Corresponding author: Tian, H. (tianh80@126.com)
Source title: Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering
Abbreviated source title: Hongwai yu Jiguang Gongcheng Infrared Laser Eng.
Volume: 42
Issue: 2
Issue date: February 2013
Publication year: 2013
Pages: 507-512
Language: Chinese
ISSN: 10072276
Document type: Journal article (JA)
Publisher: Chinese Society of Astronautics, P.O. Box 225-32, Tianjin, 300192, China
Abstract: In order to meet the demand of measuring the projectile-curtain parameter of
multibarrel volleyed weapons, a method basing on the divided six-light-screen array was put
forward. When projectiles from multibarrel volleyed weapons past through the divided screens,
each small screen sensor would put out signals. The multi-channels data acquisition device
captured these signals and then calculated the times of between different signals. The time
sequence for a projectile past through six screens can be identified according to the principle that
the flying time between the symmetry screens was the same and the flying time in different
position in one screen was different. Finally the flying parameters for every projectile can be
worked out. The efficiency of the algorithm has been verified by emulation tests. Besides, the
implementation scheme for the light screen was given, and has been verified by the high rate
firing tests.
Number of references: 10
Main heading: Projectiles
Controlled terms: Aerospace engineering - Electrical engineering
Uncontrolled terms: Array measurements - Data-acquisition devices - Divided screen Firing rates - Flying parameters - Impacting coordinate - Implementation scheme Six-light-screen array
Classification code: 654 Rockets and Rocket Propulsion - 658 Aerospace Engineering,
General - 709 Electrical Engineering, General
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number: 20131616216516
Title: Hydraulic development of the turbines for Gibe III, Ethiopia
Authors: Wang, Z.N.1, 2 ; Luo, X.Q.1 ; Guo, P.C.1 ; Wang, Y.L.2/;罗兴锜;郭鹏程;
Author affiliation: 1 Xi'an University of Technology, Xi'an City 710048, Shanxi, China
2 Dongfang Electric Machinery Co., Deyang City 61800, Sichuan, China
Corresponding author: Wang, Z.N.
Source title: International Journal on Hydropower and Dams
Abbreviated source title: Int J Hydropower Dams
Volume: 20
Issue: 2
Issue date: 2013
Publication year: 2013
Pages: 46-50
Language: English
ISSN: 13522523
CODEN: IHDAFN
Document type: Journal article (JA)
Publisher: Aqua-Media International Ltd., Westmead Road, Sutton, SM1 4JH, United Kingdom
Abstract: The Gibe III hydro station, on the Omo river, near the city of Sodo in Ethiopia, is the
third plant in the Omo river cascade. It will have a total capacity of 1870 MW, generated by ten
187 MW Francis units. This paper discusses key issues for the design of the Gibe III turbines, with
particular reference to the optimization of their hydraulic performance by model testing. Analysis
of the relevant parameters, characteristics of the powerplant, geometry of the proposed turbine
design and performance predictions by a combination of methods are all discussed in this paper.
Number of references: 6
Main heading: Hydraulic motors
Controlled terms: Turbines
Uncontrolled terms: Ethiopia - Hydraulic performance - Key Issues - Model testing
- Performance prediction - Turbine designs
Classification code: 612.3 Gas Turbines and Engines - 632.2 Hydraulic Equipment and
Machinery
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
10.
Accession number: 20131516204386
Title: Design of digital Pound-Drever-Hall frequency stabilizing system for two-cavity
dual-frequency Nd:YAG laser
Authors: Xing, Junhong1 ; Jiao, Mingxing1 ; Zheng, Yi1 ; Zheng, Lingling1/邢俊红;焦明星;郑毅;
Author affiliation: 1 Department of Precision Instruments, School of Mechanical and
Instrumental Engineering, Xi' An University of Technology, Xi'an, Shaanxi 710048, China
Corresponding author: Xing, J.
Source title: Proceedings of SPIE - The International Society for Optical Engineering
Abbreviated source title: Proc SPIE Int Soc Opt Eng
Volume: 8759
Monograph title: Eighth International Symposium on Precision Engineering Measurements and
Instrumentation
Issue date: 2013
Publication year: 2013
Article number: 875941
Language: English
ISSN: 0277786X
CODEN: PSISDG
ISBN-13: 9780819495501
Document type: Conference article (CA)
Conference name: 8th International Symposium on Precision Engineering Measurements and
Instrumentation
Conference date: August 8, 2012 - August 11, 2012
Conference location: Chengdu, China
Conference code: 96463
Sponsor: International Committee on Measurements and Instrumentation; National Natural
Science Foundation of China; Chinese Society for Measurement; China Instrument and Control
Society
Publisher: SPIE, P.O. Box 10, Bellingham, WA 98227-0010, United States
Abstract: Two-cavity dual-frequency Nd:YAG laser with large frequency difference can be used
as an ideal light source for synthetic-wave absolute-distance interferometric system. The
operation principle of the two-cavity dual-frequency Nd:YAG laser with large frequency difference
has been introduced, and the frequency locking principle of the Pound-Drever-Hall (PDH) method
has been analyzed. A FPGA-based digital PDH frequency stabilizing system for the two-cavity
dual-frequency Nd:YAG laser has been designed, in which the same frequency reference of a high
finesse Fabry-Perot cavity is used and two separate heterodyne interference sub-systems are
employed so that two electrical error signals can be obtained. Having been processed through
FPGA, the output signals are applied to drive the PZT frequency actuators attached on the
two-cavity dual-frequency Nd:YAG laser, as a result both operating frequencies of the two-cavity
dual-frequency Nd:YAG laser can be simultaneously frequency-locked to two resonant
frequencies of the Fabry-Perot cavity. A frequency stability of better than 10-10 will be obtained
by use of the digital PDH frequency locking system, which can meet the needs of synthetic-wave
absolute-distance interferometry. © 2013 SPIE.
Number of references: 10
Main heading: Neodymium lasers
Controlled terms: Cavity resonators - Fabry-Perot interferometers - Interferometry Light sources - Natural frequencies - Precision engineering
Uncontrolled terms: Fabry-Perot cavity - Frequency differences - Frequency stabilizing
- Heterodyne interference - Interferometric system - ND : YAG lasers - Operating
frequency - Pound-Drever-Hall
Classification code: 941.4 Optical Variables Measurements - 941.3 Optical Instruments -
761 Nanotechnology - 744.4 Solid State Lasers - 744 Lasers - 714.3 Waveguides 711.1 Electromagnetic Waves in Different Media
DOI: 10.1117/12.2015216
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
11.
Accession number: 20131516204373
Title: Observations of the boundary layer structure, cloud and aerosol properties with portable
Mie scattering lidar
Authors: Yan, Qing1 ; Hua, Dengxin1 ; Li, Shichun1 ; Wang, Yufeng1 ; Zhou, Zhirong1/;华灯鑫;
李仕春;王玉峰;;
Author affiliation: 1 School of Mechanical and Precision Instrument Engineering, Xi'An
University of Technology, Xi'an 710048, China
Corresponding author: Hua, D. (dengxinhua@xaut.edu.cn)
Source title: Proceedings of SPIE - The International Society for Optical Engineering
Abbreviated source title: Proc SPIE Int Soc Opt Eng
Volume: 8759
Monograph title: Eighth International Symposium on Precision Engineering Measurements and
Instrumentation
Issue date: 2013
Publication year: 2013
Article number: 87593O
Language: English
ISSN: 0277786X
CODEN: PSISDG
ISBN-13: 9780819495501
Document type: Conference article (CA)
Conference name: 8th International Symposium on Precision Engineering Measurements and
Instrumentation
Conference date: August 8, 2012 - August 11, 2012
Conference location: Chengdu, China
Conference code: 96463
Sponsor: International Committee on Measurements and Instrumentation; National Natural
Science Foundation of China; Chinese Society for Measurement; China Instrument and Control
Society
Publisher: SPIE, P.O. Box 10, Bellingham, WA 98227-0010, United States
Abstract: A portable Micro-pulsed Mie scattering lidar at the laser wavelength of 532 nm has
been developed for routine observation of atmospheric optical properties of the lower
troposphere, including boundary layer structure, cloud, the distribution of aerosol and horizontal
visibility and so on. The configuration of lidar and its design methods including the hardware and
software were described in details. The lidar system was controlled by compact computer,
including self adjustment for coaxial lidar, three-dimensional scanning, real-time data processing
of visualization and inversion online. The experimental results illustrate that the system can
measure the atmospheric aerosols up to the range of near 5 km at daytime and up to 15 km at
nighttime under the measurement conditions of laser energy of 50 μJ, signal averaging time of
40s, a receiving aperture 254 mm, range resolution of 7.5 m and analog detection model, which
can provide scientific measurement data for studying the atmospheric environment change,
particularly for resolving the particulate pollutant generation, transmission and diffusion
characteristics. © 2013 SPIE.
Number of references: 10
Main heading: Optical radar
Controlled terms: Atmospheric aerosols - Atmospheric thermodynamics - Boundary
layers - Brillouin scattering - Clouds - Measurements - Optical properties Pollution detection - Precision engineering - Solids
Uncontrolled terms: ABL - Atmospheric optical properties - Boundary layer structure Diffusion characteristics - Mie-scattering lidar - observation - Real-time data
processing - Three-dimensional scanning
Classification code: 943 Mechanical and Miscellaneous Measuring Instruments - 942
Electric and Electronic Measuring Instruments - 941 Acoustical and Optical Measuring
Instruments - 933 Solid State Physics - 761 Nanotechnology - 944 Moisture, Pressure
and Temperature, and Radiation Measuring Instruments - 741.3 Optical Devices and Systems
- 651.1 Aerodynamics, General - 454.2 Environmental Impact and Protection - 443.1
Atmospheric Properties - 443 Meteorology - 741.1 Light/Optics
DOI: 10.1117/12.2014571
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
12.
Accession number: 20131516202127
Title: Design of a real-time portable confocal scanning laser microscope
Authors: Yang, Xusan1, 2 ; Zhao, Yaohuan1 ; Yin, Gang3 ; Li, Haojie1, 2 ; Wang, Tingting1 ; Xi,
Peng1/杨旭三;;;;;
Author affiliation: 1 Department of Biomedical Engineering, College of Engineering, Peking
University, No. 5 Yiheyuan Road, Beijing 100871, China
2 Department of Applied Physics, School of Science, Xi'an University of Technology, No. 5 South
Jinhua Road, Xi'an 710048, China
3 Shanghai Bandweave Technologies Co. Ltd., Shanghai 201203, China
Corresponding author: Yang, X.
Source title: Progress in Biomedical Optics and Imaging - Proceedings of SPIE
Abbreviated source title: Progr. Biomed. Opt. Imaging Proc. SPIE
Volume: 8553
Monograph title: Optics in Health Care and Biomedical Optics V
Issue date: 2012
Publication year: 2012
Article number: 85531D
Language: English
ISSN: 16057422
ISBN-13: 9780819493088
Document type: Conference article (CA)
Conference name: Optics in Health Care and Biomedical Optics V
Conference date: November 5, 2012 - November 7, 2012
Conference location: Beijing, China
Conference code: 96406
Sponsor: The Society of Photo-Optical Instrumentation Engineers (SPIE); COS - Chinese Optical
Society
Publisher: SPIE, P.O. Box 10, Bellingham, WA 98227-0010, United States
Abstract: A portable video-rate confocal laser scanning microscope (CLSM) is implemented with
polygon mirror and galvanometric mirror employed as the fast and slow axis scanner, respectively.
The system can be applied for noninvasively imaging skin and other tissue. The dimension of this
real-time CLSM is only 33x20x12cm3 with weigh of 1.780 kg. Here we used a single Complex
Programmable Logic Device (CPLD) to generate the control and synchronization signals for real
time confocal microscopy. Utilizing NI image acquisition card, the CLSM system can acquire and
store the real-time images. So that high resolution confocal microscopy is achieved
simultaneously. © Copyright SPIE.
Number of references: 12
Main heading: Optics
Controlled terms: Confocal microscopy - Health care - Image acquisition - Logic
devices - Mirrors - Tissue
Uncontrolled terms: Complex programmable logic device - Confocal laser scanning
microscope - Confocal microscopes - Confocal scanning laser microscope - CPLD real-time - Real-time images - Synchronization signals
Classification code: 461.2 Biological Materials and Tissue Engineering - 461.7 Health Care
- 721.2 Logic Elements - 723 Computer Software, Data Handling and Applications 741.1 Light/Optics - 741.3 Optical Devices and Systems
DOI: 10.1117/12.2001006
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
13.
Accession number: 20131616208934
Title: Watertightness, cracking resistance, and self-healing of asphalt concrete used as a water
barrier in da
Authors: Zhang, Yingbo1 ; Höeg, Kaare2 ; Wang, Weibiao1 ; Zhu, Yue1/;
Author affiliation: 1 Xi'an University of Technology, 5 Jinhua South Road, 710048 Xi'an, China
2 Norwegian Geotechnical Institute (NGI), P.O. Box 3930 Ullevaal Stadion, NO-0806, Oslo,
Norway
Corresponding author: Wang, W. (wangweibiao59@hotmail.com)
Source title: Canadian Geotechnical Journal
Abbreviated source title: Can. Geotech. J.
Volume: 50
Issue: 3
Issue date: March 2013
Publication year: 2013
Pages: 275-287
Language: English
ISSN: 00083674
E-ISSN: 12086010
CODEN: CGJOAH
Document type: Journal article (JA)
Publisher: National Research Council of Canada, Buiding M 55, Ottawa, ONT K1A 0R6, Canada
Abstract: The coefficient of permeability of hydraulic asphalt concrete is in the range
10-8-10-10 cm/s. Laboratory test results show that triaxial specimens in axial compression can
undergo axial strains up to 18% without any significant increase in permeability until approaching
the compressive strength. For temperatures between 5 and 20 °C and strain rates between 2 ×
10-3%/s and 5 × 10-3%/s, conventional hydraulic asphalt concrete can tolerate 1%-3% tensile
strains before cracking in direct tension tests and strains up to 3%-4% in bending. At 20 °C the
tensile and bending strains at cracking are 2-4 times higher than those at 0 °C, and at -20 °C they
are approximately 0.2% and 0.8%, respectively. Asphalt concrete possesses pronounced crack
self-healing properties. In the experiments, the crack leakage rate dropped 1-4 orders of
magnitude within a few hours and the cracked specimens regained 55% of the intact tensile
strength after only 1 day of self-healing. In summary, the comprehensive series of laboratory
tests documents that asphalt concrete has characteristics that make the material extremely well
suited for use in impervious barriers in dams, and the test results reported herein can be of great
use in barrier design.
Number of references: 23
Main heading: Cracks
Controlled terms: Asphalt concrete - Concretes - Dams - Design - Tensile
strength
Uncontrolled terms: Coefficient of permeability - Cracking resistance - Direct tension
tests - Resistance to cracking - Self-healing - Self-healing properties - Water
barriers - Watertightness
Classification code: 408 Structural Design - 411.1 Asphalt - 412 Concrete - 421
Strength of Building Materials; Mechanical Properties - 441.1 Dams
DOI: 10.1139/cgj-2011-0443
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
20130502 新增 7 条
1.
Accession number: 20131716237031
Title: Research on change structural characteristics of loess based on true triaxial tests
Authors: Deng, Guo-Hua1 ; Shao, Sheng-Jun2/邓国华;邵生俊
Author affiliation: 1 The Technology Department of Xi'an Metro Ltd., Xi'an 710018, China
2 Institute of Geotechnical Engineering, Xi'an University of Technology, Xi'an 710048, China
Corresponding author: Deng, G.-H. (gh_deng@163.com)
Source title: Yantu Lixue/Rock and Soil Mechanics
Abbreviated source title: Rock Soil Mech
Volume: 34
Issue: 3
Issue date: March 2013
Publication year: 2013
Pages: 679-684
Language: Chinese
ISSN: 10007598
Document type: Journal article (JA)
Publisher: Academia Sinica, Wuhan, 430071, China
Abstract: Based on the theory of comprehensive structure potential, the stress-strain relations
of intact loess, remolded loess and saturated loess have been researched by independent
developed true triaxial apparatus. It has been reflected that the relationship between stress ratio
structure parameter and generalized shear strain along with consolidation pressure and stress
path. The mathematical model has been established. Meanwhile, the reliability of true triaxial
apparatus and stress ratio structure parameter has been validated. It is shown that the
stress-strain relations have distinct difference for different soil states. The stress-strain relations
tend to the characteristic of strain softening or hyperbola for the intact loess. The stress-strain
relations tend to the characteristic of hyperbola and strain hardening for the remolded or
saturated loess. The soil structure reduces gradually with the increasing of shear deformation and
water content. The consolidation pressure σc and intermediate principal stress patameter b are
the influential factors for soil structure. The simulation formula can accurately reflect the theory
and experimentation. It is convenient for application in projects.
Number of references: 8
Main heading: Sediments
Controlled terms: Mathematical models - Soils - Strain hardening
Uncontrolled terms: Generalized shear strains - Intermediate principal stress - Stress
paths - Structural characteristics - Structure parameter - Theory of comprehensive
structure potential - True triaxial - True triaxial apparatus
Classification code: 483 Soil Mechanics and Foundations - 483.1 Soils and Soil Mechanics 537.1 Heat Treatment Processes - 921 Mathematics
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number: 20131616221537
Title: Resistivity relaxation of anisotropic conductive polymer composites
Authors: Gao, Jie-Feng1 ; Huang, Hua-Dong1 ; Yan, Ding-Xiang1 ; Ren, Peng-Gang2 ; Zeng,
Xiang-Bu1 ; Li, Zhong-Ming1/;;;任鹏刚;;;
Author affiliation: 1 College of Polymer Science and Engineering, State Key Laboratory of
Polymer Materials Engineering, Sichuan University, Chengdu, 610065, Sichuan, China
2 Institute of Printing and Packaging Engineering, Xian University of Technology, Xian, Shaanxi,
China
Corresponding author: Li, Z.-M. (zmli@scu.edu.cn)
Source title: Journal of Macromolecular Science, Part B: Physics
Abbreviated source title: J Macromol Sci Part B Phys
Volume: 52
Issue: 6
Issue date: May 1, 2013
Publication year: 2013
Pages: 788-796
Language: English
ISSN: 00222348
E-ISSN: 1525609X
CODEN: JMAPBR
Document type: Journal article (JA)
Publisher: Taylor and Francis Inc., 325 Chestnut St, Suite 800, Philadelphia, PA 19106, United
States
Abstract: The electrical properties of anisotropic carbon nanotubes (CNTs)/polycarbonate (PC)/
polyethylene (PE) (ACPC) strongly depended on the CNTs concentration. When the ACPC was
subjected to isothermal treatment (IT), the resistivity variation in both the parallel and
perpendicular directions had the characteristics of a relaxation as a function of temperature.
During the IT the orientation of the PC microfibrils was gradually damaged and CNTs/PC
microfibrils were deformed and changed to short fibers, leading to a transition from anisotropy
to isotropy. The velocity of the conductive network reconstruction could be characterized by the
relaxation time, and the resistivity of the composite during the IT process can be instantaneously
predicted based on the relaxation equation. The relaxation time and the equilibrium resistivity of
the composite during IT were determined by the IT temperature and CNT content. © 2013
Copyright Taylor and Francis Group, LLC.
Number of references: 23
Main heading: Anisotropy
Controlled terms: Carbon nanotubes - Composite materials - Electric conductivity Electric properties - Isotherms - Relaxation time
Uncontrolled terms: Conductive networks - Conductive polymer composites Equilibrium resistivity - Isothermal treatment - macromolecular relaxation Micro-fibrils - Relaxation equations - Resistivity variation
Classification code: 933 Solid State Physics - 931.2 Physical Properties of Gases, Liquids and
Solids - 931 Classical Physics; Quantum Theory; Relativity - 951 Materials Science 811 Cellulose, Paper and Wood Products - 701.1 Electricity: Basic Concepts and Phenomena
- 415 Metals, Plastics, Wood and Other Structural Materials - 761 Nanotechnology
DOI: 10.1080/00222348.2012.730356
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number: 20131716227473
Title: Web3D-based product design and interactive customization technology
Authors: Guo, Lei1, 2 ; Ji, Xiaomin1 ; Bai, Xiaobo1/;吉晓民;
Author affiliation: 1 Xi'an University of Technology, Xi'an, 710048, China
2 University of Electronic and Technology of China, Zhongshan Institute, Zhongshan, China
Corresponding author: Guo, L. (79115521@QQ.com)
Source title: Key Engineering Materials
Abbreviated source title: Key Eng Mat
Volume: 546
Monograph title: Digital Design and Manufacturing Technology III
Issue date: 2013
Publication year: 2013
Pages: 1-5
Language: English
ISSN: 10139826
CODEN: KEMAEY
ISBN-13: 9783037856260
Document type: Conference article (CA)
Conference name: 2012 National Conference on Digital Design and Manufacturing Technology,
DDMTC 2012
Conference date: November 12, 2012 - November 14, 2012
Conference location: Ningbo, China
Conference code: 96579
Sponsor: Zhejiang University of Technology; Productivity Promotion Center of Ningbo
Publisher: Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635, Switzerland
Abstract: In mass customization mode, it was an inevitable trend that user custom products
become really required through network. Aimed at the characteristics of the products display and
Customization on the Internet, Web3D are used in developing Customization methods of
products form, material and color. It was proved that the method could help to improve
consumers' ability to customize products interactive on internet, which can promote participation
of the customers and enhance the competitive ability of the enterprises. © (2013) Trans Tech
Publications.
Number of references: 10
Main heading: Web services
Controlled terms: Color - Internet - Manufacture - Materials - Product design
Uncontrolled terms: Competitive ability - Custom products - Customization - Form
- Inevitable trends - Mass customization - Products form - Web3D
Classification code: 913.4 Manufacturing - 913.1 Production Engineering - 741.1
Light/Optics - 951 Materials Science - 723 Computer Software, Data Handling and
Applications - 717 Optical Communication - 716 Telecommunication; Radar, Radio and
Television - 718 Telephone Systems and Related Technologies; Line Communications
DOI: 10.4028/www.scientific.net/KEM.546.1
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number: 20131716235580
Title: A new massive data processing framework under cloud environment for digital
community
Authors: Hou, Ke1, 2 ; Zhang, Jing1/;张璟
Author affiliation: 1 School of Computer Science and Engineering, Xi'An University of
Technology, Xi'an 710048, China
2 School of Economic and Management, Xi'An Shiyou University, Xi'an 710065, China
Corresponding author: Hou, K.
Source title: Information Technology Journal
Abbreviated source title: Inf. Technol. J.
Volume: 12
Issue: 6
Issue date: 2013
Publication year: 2013
Pages: 1079-1088
Language: English
ISSN: 18125638
E-ISSN: 18125646
Document type: Journal article (JA)
Publisher: Asian Network for Scientific Information, 308-Lasani Town, Sargodha Road,
Faisalabad, Pakistan
Abstract: Digital community involves e-government, e-commerce, smart health and other
applications. With the increase of customers and types of business, it becomes more important
for digital community to process massive data efficiently. Although, the current cloud-based
applications can provide some elastic and on-demand calculation abilities to digital community,
their underlying programming models still have certain limitations. This study aims to provide a
new framework of massive data processing for digital community. In the framework, multiple
programming models are adopted and each programming model handles the specific calculations
that they do best. These calculations mainly include embarrassingly parallel calculation, iteration
calculation and data-dependent complex calculation. To improve the performance of the
framework, the programming model connection pool and the virtual subnet are designed and
applied. Compared to Hadoop and its modified version, on average, the proposed framework can
reduce runtime by 1.32. The experimental results show that the proposed framework has higher
generality and efficiency. Moreover, it is reasonable and valuable for digital community to analyze
comprehensively trade area on geographical location and business volume. © 2013 Asian
Network for Scientific Information.
Number of references: 25
Main heading: Iterative methods
Controlled terms: Cloud computing - Data processing - Metadata
Uncontrolled terms: Cloud environments - Cloud-based applications - Digital
communities - Geographical locations - Map-reduce - Parallel calculation Programming models - Virtual subnet
Classification code: 722.4 Digital Computers and Systems - 723 Computer Software, Data
Handling and Applications - 723.2 Data Processing and Image Processing - 921.6
Numerical Methods
DOI: 10.3923/itj.2013.1079.1088
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number: 20131716238937
Title:
Several shear spatially mobilized planes and anisotropic strength criteria of soils
Authors: Shao, Sheng-Jun1, 2 ; Xu, Ping1, 2 ; Chen, Chang-Lu1, 3/邵生俊;徐萍;陈昌禄
Author affiliation: 1 Institute of Geotechnical Engineering, Xi'an University of Technology,
Xi'an 710048, China
2 Shaanxi Key Laboratory of Loess Mechanics and Engineering, Xi'an 710048, China
3 Bijie University, Bijie 551700, China
Corresponding author: Shao, S.-J. (sjshao@xaut.edu.cn)
Source title: Yantu Gongcheng Xuebao/Chinese Journal of Geotechnical Engineering
Abbreviated source title: Yantu Gongcheng Xuebao
Volume: 35
Issue: 3
Issue date: March 2013
Publication year: 2013
Pages: 422-435
Language: Chinese
ISSN: 10004548
CODEN: YGXUEB
Document type: Journal article (JA)
Publisher: Chinese Society of Civil Engineering, 34 Hujuguan, Nanjing, 210024, China
Abstract: The strength laws of natural soils are complex because of their anisotropic and
structural properties, and stress anisotropy and damage of structures under loading. By analyzing
the shear failure planes or spatially mobilized planes of the Mohr-Coulomb criterion,
Drucker-Prager criterion and Matsuoka-Nakai strength criterion, two kinds of spatially mobilized
planes, static spatially mobilized plane with unchanging normal direction and dynamic spatially
mobilized plane with changing normal direction, are proposed respectively by changing the
characteristics of normal direction on the spatially mobilized plane. According to the
Mohr-Coulomb failure plane and Matsuoka-Nakai's spatially mobilized plane, the static axial
symmetrical compression spatially mobilized plane and axial extension spatially mobilized plane
are obtained respectively under axial symmetrical compression and axial extension stress states.
Assuming the linear relation between shear stress and normal stress on the spatially mobilized
plane of soil element, the new isotropic and anisotropic strength criteria are established based
on the stress conditions of two kinds of static spatially mobilized planes, which are determined
respectively by the axial symmetrical compression and axial symmetrical extension stress states.
For the intact loess with micro-structural characteristics including vertical crack and transversely
isotropic body, the anisotropic strength is revealed by the true triaxial experiments on intact loess,
in which the maximum principal stress, intermediate principal stress or minor principal stress act
on the vertical direction of loess sample. Considering the relationship between the Cartesian
coordinates corresponding to vertical crack of loess and rotation of the maximum, intermediate
and minor principal stress axes, the spatial strength surface in the principal stress space being the
same as that in the Cartesian coordinates. At the same time, the rationality of the above strength
criteria is validated by the true axial test results of intact loess with vertical crack structure. The
new strength criteria are analyzed by the geometrical characteristics of strength surfaces in the
principal stress three-dimensional space.
Number of references: 7
Main heading: Strength of materials
Controlled terms: Anisotropy - Cracks - Loading - Sediments - Soils
Uncontrolled terms: Anisotropic strength - Loess - Spatially mobilized planes Strength criteria - Strength failures
Classification code: 421 Strength of Building Materials; Mechanical Properties - 483 Soil
Mechanics and Foundations - 483.1 Soils and Soil Mechanics - 672 Naval Vessels 931.2 Physical Properties of Gases, Liquids and Solids
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number: 20131716238568
Title: Crystal growth process and mechanism of rods Y2O3 powders synthesized by
hydrothermal treatment
Authors: Wang, Ying1, 2 ; Zhao, Gao-Yang1/王莹;赵高扬
Author affiliation: 1 College of Materials Science and Engineering, Xi'an University of
Technology, Xi'an 710048, China
2 College of Materials Science and Engineering, Shaanxi University of Science and Technology,
Xi'an 710021, China
Corresponding author: Zhao, G.-Y.
Source title: Gongneng Cailiao/Journal of Functional Materials
Abbreviated source title: Gongneng Cailiao
Volume: 44
Issue: 5
Issue date: March 15, 2013
Publication year: 2013
Pages: 649-652
Language: Chinese
ISSN: 10019731
CODEN: GOCAEA
Document type: Journal article (JA)
Publisher: Journal of Functional Materials, P.O. Box 1512, Chongqing, 630700, China
Abstract: Y2O3 nano-and micron-rods were hydrothermal synthesized using yttrium nitrate
(Y(NO3)3·6H2O) and ammonia solution at low temperature. The products via the hydrothermal
treatment yttrium nitrate were characterized by X-ray diffraction, transmission electron
microscopy and scanning electron microscopy. Results show Y2O3 sheets with low
crystallinitywere obtained with the hydrothermal treatment at 80°C for 4h. Y2(OH)5(NO3)·H2O
crystal was synthesized from the unshaped colloidal Y(OH)3-n(NO3)n ·mH2O and the composition
was changed from Y2(OH)5(NO3)·H2O to Y4O(OH)9(NO3) with higher temperature and higher
press. Y2O3 rods with higher crystallinity were obtained at 180°C for 4h. The different shape
Y4O(OH)9(NO3) crystal growth process was following the dissoluting-crystallization mechanism
and the recrystallization were existed.
Number of references: 16
Main heading: Yttrium alloys
Controlled terms: Crystal growth - Hydrothermal synthesis - Nitrates - Scanning
electron microscopy - Transmission electron microscopy - X ray diffraction - Yttrium
Uncontrolled terms: Ammonia solution - Crystal growth mechanism - Crystal growth
process - Crystallinities - Different shapes - Hydrothermal treatments - Low
temperatures
Classification code: 933.1.2 Crystal Growth - 933.1.1 Crystal Lattice - 804.2 Inorganic
Compounds - 802.2 Chemical Reactions - 741.3 Optical Devices and Systems - 741.1
Light/Optics - 549.3 Nonferrous Metals and Alloys excluding Alkali and Alkaline Earth Metals
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number: 20131716232257
Title: Fast transmission to remote cooperative groups: A new key management paradigm
Authors: Wu, Qianhong1, 2 ; Qin, Bo2, 3 ; Zhang, Lei4 ; Domingo-Ferrer, Josep2 ; Manjón, Jesús
A.2/伍前红;秦波;
Author affiliation: 1 School of Computer, Wuhan University, Wuhan 430072, China
2 UNESCO Department in Data Privacy, Department of Computer Engineering and Mathematics,
Universitat Rovira i Virgili, Tarragona 43007, Spain
3 School of Science, Xi'an University of Technology, Xi'an 710017, China
4 Shanghai Key Laboratory of Trustworthy Computing, Software Engineering Institute, East
China Normal University, Shanghai 200062, China
Corresponding author: Wu, Q. (qianhong.wu@urv.cat)
Source title: IEEE/ACM Transactions on Networking
Abbreviated source title: IEEE ACM Trans Networking
Volume: 21
Issue: 2
Issue date: 2013
Publication year: 2013
Pages: 621-633
Article number: 6247486
Language: English
ISSN: 10636692
CODEN: IEANEP
Document type: Journal article (JA)
Publisher: Institute of Electrical and Electronics Engineers Inc., 445 Hoes Lane / P.O. Box 1331,
Piscataway, NJ 08855-1331, United States
Abstract: The problem of efficiently and securely broadcasting to a remote cooperative group
occurs in many newly emerging networks. A major challenge in devising such systems is to
overcome the obstacles of the potentially limited communication from the group to the sender,
the unavailability of a fully trusted key generation center, and the dynamics of the sender. The
existing key management paradigms cannot deal with these challenges effectively. In this paper,
we circumvent these obstacles and close this gap by proposing a novel key management
paradigm. The new paradigm is a hybrid of traditional broadcast encryption and group key
agreement. In such a system, each member maintains a single public/secret key pair. Upon seeing
the public keys of the members, a remote sender can securely broadcast to any intended
subgroup chosen in an ad hoc way. Following this model, we instantiate a scheme that is proven
secure in the standard model. Even if all the nonintended members collude, they cannot extract
any useful information from the transmitted messages. After the public group encryption key is
extracted, both the computation overhead and the communication cost are independent of the
group size. Furthermore, our scheme facilitates simple yet efficient member deletion/addition
and flexible rekeying strategies. Its strong security against collusion, its constant overhead, and its
implementation friendliness without relying on a fully trusted authority render our protocol a
very promising solution to many applications. © 1993-2012 IEEE.
Number of references: 41
Main heading: Public key cryptography
Controlled terms: Access control - Ad hoc networks - Communication - Security of
data
Uncontrolled terms: broadcast - Broadcast encryption - Computation overheads Cooperative computing - Key generation centers - Key management - Limited
communication - Trusted authorities
Classification code: 716 Telecommunication; Radar, Radio and Television - 723 Computer
Software, Data Handling and Applications - 723.2 Data Processing and Image Processing
DOI: 10.1109/TNET.2012.2208201
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
20130510 新增 6 条
1.
Accession number: 20131816284958
Title: Nonsmooth dynamic behaviors inherited from an ecohydrological model: Mutation,
bifurcation, and chaos
Authors: Lin, Mu1, 2 ; Tian, Fuqiang2 ; Hu, Heping2 ; Liu, Dengfeng3/;;;刘登峰
Author affiliation: 1 School of Applied Mathematics, Central University of Finance and
Economics, Beijing 100081, China
2 Department of Hydraulic Engineering, State Key Laboratory of Hydroscience and Engineering,
Tsinghua University, Beijing 100084, China
3 Key Laboratory of Northwest Water Resources and Environmental Ecology of MOE, Xi'An
University of Technology, Xi'an 710048, China
Corresponding author: Tian, F. (tianfq@tsinghua.edu.cn)
Source title: Mathematical Problems in Engineering
Abbreviated source title: Math. Probl. Eng.
Volume: 2013
Issue date: 2013
Publication year: 2013
Article number: 731042
Language: English
ISSN: 1024123X
E-ISSN: 15635147
Document type: Journal article (JA)
Publisher: Hindawi Publishing Corporation, 410 Park Avenue, 15th Floor, 287 pmb, New York,
NY 10022, United States
Abstract: The existence of nontrivial dynamic behaviors in a hydrological system is intensively
discussed in the literature. However, most of the work has been done from the nonlinear data
analysis perspective, with only a few exceptions, due to the mathematical difficulties for
theoretical analysis. In this study, a simple but comprehensive enough ecohydrological model
with the pulsed atmospheric forcing was developed from the process analysis perspective. The
model was then utilized to analyze the non-trivial dynamic behaviors in a coupled ecohydrological
system qualitatively and numerically. Our results confirm the existence of multiple stationary
states discussed by many researchers. Furthermore, parameter bifurcation was studied and the
phenomenon of mutation is found to be rather common. Also, the chaotic characteristic of the
system state is obtained under some specific parameters. Parts of these behaviors were seldom
reported through the deterministic dynamic analysis done previously. © 2013 Mu Lin et al.
Number of references: 33
Main heading: Engineering
Controlled terms: Mathematical techniques
Uncontrolled terms: Atmospheric forcing - Chaotic characteristics - Eco-hydrological
models - Hydrological system - Mathematical difficulty - Non-smooth dynamics Nonlinear data analysis - Parameter bifurcation
Classification code: 901 Engineering Profession - 921 Mathematics
DOI: 10.1155/2013/731042
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number: 20131816296119
Title: Image segmentation based on modified FCM algorithms
Authors: Shi, Zhenghao1, 2 ; He, Lifeng3 ; Nakamura, Tsuyoshi1 ; Itoh, Hidenori1/石争浩;;;;
Author affiliation: 1 School of Computer Science and Engineering, Nagoya Institute of
Technology, Nagoya 464-8555, Japan
2 School of Computer Science and Engineering, Xi'An University of Technology, Xi'an 710048,
China
3 Department of Radiology, University of Chicago, 5841 South Maryland Avenue, MC 2026,
Chicago, IL 60637, United States
Corresponding author: Shi, Z. (zhshi@juno.ics.nitech.ac.jp)
Source title: International Conference on Artificial Intelligence and Pattern Recognition 2007,
AIPR 2007
Abbreviated source title: Int. Conf. Artif. Intell. Pattern Recogn., AIPR
Monograph title: International Conference on Artificial Intelligence and Pattern Recognition
2007, AIPR 2007
Issue date: 2007
Publication year: 2007
Pages: 63-69
Language: English
ISBN-13: 9781615677214
Document type: Conference article (CA)
Conference name: 2007 International Conference on Artificial Intelligence and Pattern
Recognition, AIPR 2007
Conference date: July 9, 2007 - July 12, 2007
Conference location: Orlando, FL, United states
Conference code: 96737
Sponsor: Int. Soc. Res. Sci. Technol. (ISRST)
Publisher: ISRST, PO Box 2464 Tallahassee,, FL 32316-2464, United States
Abstract: In this paper, two image segmentation methods, namely Genetic Simulate based FCM
(Fuzzy C-Means, FCM) image segmentation and Rough Set based FCM image segmentation, are
proposed. In the first methods, the FCM Clustering algorithm, Simulated Annealing algorithm
(Simulated annealing, SA) and Genetic algorithm (Genetic algorithm, GA) are combined to
overcome the drawbacks of conventional FCM segmentation algorithm, namely slow
computation speed and over-dependence on initial value. In this method, the fuzzy cluster center
is coded as a variable length chromosome, genetic operators such as intercross and mutation are
introduced into a Simulated Annealing algorithm as an enhancement, which allows to recombine
solutions produced by individual simulate annealing processes at fixed time intervals. At the
same time Metropolis criterion is taken as a standard for a genetic operation to accept crossover
and mutated individuals, this improves the convergence of the algorithm. Owing to the
complementarities of FCM, SA and GA, this modified algorithm not only can escape from local
minima but also holds higher parallel clustering segmentation capability concurrently. In the
second method, Rough Set theory is used to optimal the performance of FCM in analyzing
vagueness and uncertainty inherent in building clustering set. By reduction technique (the core of
Rough Sets), those redundant initial cluster centers in the initial cluster set are eliminated this is
very useful for improving the convergence of the FCM algorithm. Experimental results
demonstrate the efficiency and the effectiveness of the proposed methods.
Number of references: 21
Main heading: Clustering algorithms
Controlled terms: Artificial intelligence - Genetic algorithms - Image segmentation Pattern recognition - Rough set theory - Simulated annealing - Uncertainty analysis
Uncontrolled terms: Initial cluster centers - Metropolis criterion - Reduction techniques
- Segmentation algorithms - Segmentation methods - Simulated annealing algorithms
- Vagueness and uncertainty - Variable length chromosome
Classification code: 716 Telecommunication; Radar, Radio and Television - 721 Computer
Circuits and Logic Elements - 723 Computer Software, Data Handling and Applications 921 Mathematics - 921.4 Combinatorial Mathematics, Includes Graph Theory, Set Theory 922.1 Probability Theory
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number:
20131816300259
Title:
Electromagnetic microwave absorption of Fe-Si flakes with different mixtures
Authors: Tian, N.1 ; You, C.Y.1 ; Liu, J.1 ; Qu, F.1 ; Wang, C.H.1 ; Lu, Z.X.1/田娜;游才印;;
Author affiliation: 1 School of Materials Science and Engineering, Xi'An University of
Technology, Xi'an 710048, China
Corresponding author: You, C.Y. (caiyinyou@xaut.edu.cn)
Source title: Journal of Magnetism and Magnetic Materials
Abbreviated source title: J Magn Magn Mater
Volume: 339
Issue date: August 2013
Publication year: 2013
Pages: 114-118
Language: English
ISSN: 03048853
CODEN: JMMMDC
Document type: Journal article (JA)
Publisher: Elsevier, P.O. Box 211, Amsterdam, 1000 AE, Netherlands
Abstract: Flakes of Fe-Si alloy were fabricated to get a relatively high permeability. Additives of
graphene, TiO2 and ZnO were mixed with the Fe-Si flakes. The magnetic properties of the Fe-Si
alloy flakes were slightly affected by mixing, causing little decrease of the complex permeability.
But the complex permittivity was significantly reduced due to the enhanced interfacial resistivity
after mixing with graphene, TiO2 or ZnO, resulting in a better electromagnetic impedance
matching. The best microwave absorption performance was achieved by mixing TiO2: for an
absorber thickness of 1.5 mm, a minimum reflection loss (RL) of -14.1 dB was obtained at 7.1 GHz
with a large width of 3.6 GHz in which the RL is lower than -10 dB; with the absorber thickness of
2.4 mm, the minimum RL reaches -35.3 dB at 4.2 GHz. The different effects among graphene,
TiO2 and ZnO additives on the electromagnetic properties are mainly related to the morphology
of the additives rather than their intrinsic characteristics. © 2013 Elsevier B.V. All rights reserved.
Number of references: 24
Main heading: Silicon alloys
Controlled terms: Dielectric properties - Electromagnetism - Graphene - Iron alloys
- Iron compounds - Mixing - Silicon - Titanium dioxide - Zinc alloys - Zinc
oxide
Uncontrolled terms: Absorber thickness - Complex permeability - Complex permittivity
- Electromagnetic impedance - Electromagnetic properties - Fe-Si flakes - Intrinsic
characteristics - Microwave absorption
Classification code: 804 Chemical Products Generally - 802.3 Chemical Operations - 761
Nanotechnology - 804.2 Inorganic Compounds - 701 Electricity and Magnetism - 546.3
Zinc and Alloys - 545.3 Steel - 549.3 Nonferrous Metals and Alloys excluding Alkali and
Alkaline Earth Metals
DOI: 10.1016/j.jmmm.2013.03.003
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number: 20131816284988
Title: Information fields navigation with piece-wise polynomial approximation for
high-performance OFDM in WSNs
Authors: Wei, Wei1 ; Shen, Peiyi2 ; Zhang, Ying3 ; Zhang, Liang2/魏嵬;沈沛意;张颖;张亮
Author affiliation: 1 School of Computer Science and Engineering, Xi'An University of
Technology, Xi'an 710048, China
2 National School of Software, Xidian University, Xi'an 710071, Shaanxi, China
3 School of Electronic and Information Engineering, Xi'An Jiaotong University, Xi'an 710049,
China
Corresponding author: Wei, W. (weiwei@xaut.edu.cn)
Source title: Mathematical Problems in Engineering
Abbreviated source title: Math. Probl. Eng.
Volume: 2013
Issue date: 2013
Publication year: 2013
Article number: 901509
Language: English
ISSN: 1024123X
E-ISSN: 15635147
Document type: Journal article (JA)
Publisher: Hindawi Publishing Corporation, 410 Park Avenue, 15th Floor, 287 pmb, New York,
NY 10022, United States
Abstract: Since Wireless sensor networks (WSNs) are dramatically being arranged in
mission-critical applications,it changes into necessary that we consider application requirements
in Internet of Things. We try to use WSNs to assist information query and navigation within a
practical parking spaces environment. Integrated with high-performance OFDM by piece-wise
polynomial approximation, we present a new method that is based on a diffusion equation and a
position equation to accomplish the navigation process conveniently and efficiently. From the
point of view of theoretical analysis, our jobs hold the lower constraint condition and several
inappropriate navigation can be amended. Information diffusion and potential field are
introduced to reach the goal of accurate navigation and gradient descent method is applied in
the algorithm. Formula derivations and simulations manifest that the method facilitates the
solution of typical sensor network configuration information navigation. Concurrently, we also
treat channel estimation and ICI mitigation for very high mobility OFDM systems, and the
communication is between a BS and mobile target at a terrible scenario. The scheme proposed
here combines the piece-wise polynomial expansion to approximate timevariations of multipath
channels. Two near symbols are applied to estimate the first-and second-order parameters. So as
to improve the estimation accuracy and mitigate the ICI caused by pilot-aided estimation, the
multipath channel parameters were reestimated in timedomain employing the decided OFDM
symbol. Simulation results show that this method would improve system performance in a
complex environment. © 2013 Wei Wei et al.
Number of references: 12
Main heading: Wireless sensor networks
Controlled terms: Estimation - Multipath propagation - Navigation - Orthogonal
frequency division multiplexing - Partial differential equations - Polynomial approximation
- Telecommunication systems
Uncontrolled terms: Application requirements - Gradient Descent method - Information
diffusion - Internet of Things (IOT) - Mission critical applications - Network
configuration - Pilot-aided estimations - Wireless sensor network (WSNs)
Classification code: 921 Mathematics - 732 Control Devices - 718 Telephone Systems
and Related Technologies; Line Communications - 717 Optical Communication - 716.3
Radio Systems and Equipment - 716 Telecommunication; Radar, Radio and Television 711 Electromagnetic Waves
DOI: 10.1155/2013/901509
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number: 20131816299426
Title: Current carrying friction and wear characteristics of Ti3 AlC2 by novel method of
infiltration sintering
Authors: Xiao, Q.D.1 ; Lv, Z.L.1/肖琪聃;吕振林
Author affiliation: 1 Materials Science and Engineering, Xi'an University of Technology, Xi'an
710048, China
Corresponding author: Xiao, Q. D. (xiaoqidan253@163.com)
Source title: Energy Materials: Materials Science and Engineering for Energy Systems
Abbreviated source title: Energy Mater. Mater. Sci. Eng. Energy Syst.
Volume: 7
Issue: 3
Issue date: 2012
Publication year: 2012
Pages: 202-207
Language: English
ISSN: 17489237
E-ISSN: 17489245
Document type: Journal article (JA)
Publisher: Maney Publishing, Suite 1C, Joseph's Well, Hanover Walk, Leeds, LS3 1AB, United
Kingdom
Abstract: High purity Ti 3AlC2 samples were prepared by an infiltration sintering method. The
current carrying friction and wear characteristics of high pure bulk Ti 3AlC 2 dry sliding against a
GCr15 bearing steel disc were experimentally investigated on a pin-on-disk type tester at several
sliding speeds from 20 to 60 m s -1, different electric currents from 0 to 100 A and normal
pressures from 0.1 to 0.6 MPa. It was found that the highly pure Ti 3AlC2 exhibits an increasing
friction coefficient (0.11-0.65) and an increasing wear rate (2.13-7.75X10-6 mm3 N -1 m-1) with
the electric current increasing from 0 to 100 A; the normal pressure (0.1-0.6 MPa) and the sliding
speed (20- 60 m s-1) also have a complex but relatively weak influence on them. The minimum
value of friction coefficient was 0.11 when the sliding electric current, speed and normal pressure
were set to 0 A, 60 m s -1 and 0.6 MPa; the wear rate reached the maximum value 7.75X10-6
mm3 N-1 m -1 when the sliding electric current, speed and normal pressure respectively were set
to 100 A, 60 m s -1 and 0.6 MPa. The low friction coefficient can be attributed to the presence of
a continuous frictional oxide film consisting of an amorphous mixture of Al, Ti and Fe oxides on
the friction surface, which have a significant antifriction effect on the friction surfaces. The
percentage of oxide film cover was relatively higher when the electric current was 0 A, while the
percentage of oxide film cover decreased with increasing electric current. The increase in the
wear rate was ascribed to the ablation of the electric arc when the electric current was high. ©
2012 Institute of Materials.
Number of references: 14
Main heading: Titanium oxides
Controlled terms: Electric arcs - Electric currents - Friction - Oxide films Polycrystalline materials - Sintering - Wear of materials
Uncontrolled terms: Amorphous mixtures - Antifriction effect - Coefficient of frictions
- Friction and wear characteristics - Friction coefficients - Friction surfaces - Low
friction coefficients - Wear rates
Classification code: 933.1 Crystalline Solids - 931.1 Mechanics - 804.2 Inorganic
Compounds - 951 Materials Science - 712.1.2 Compound Semiconducting Materials 536.1 Powder Metallurgy Operations - 421 Strength of Building Materials; Mechanical
Properties - 701.1 Electricity: Basic Concepts and Phenomena
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number: 20131816295491
Title: Improved random aggregate model for numerical simulations of concrete engineering
simulations of concrete engineering
Authors: Yuan, Qin1 ; Junrui, Chai1, 2 ; Faning, Dang1/覃源;柴军瑞;党发宁
Author affiliation: 1 Institute of Water Resources and Hydro-electric Engineering, Xi'an
University of Technology, 710048, Xi'an, China
2 College of Civil and Hydropower Engineering, China Three Gorges University, Yichang, 443002,
Hubei, China
Corresponding author: Yuan, Q. (lanelyly@163.com)
Source title: Journal of Civil Engineering and Management
Abbreviated source title: J. Civ. Eng. Manage.
Volume: 19
Issue: 2
Issue date: April 1, 2013
Publication year: 2013
Pages: 285-295
Language: English
ISSN: 13923730
E-ISSN: 18223605
Document type: Journal article (JA)
Publisher: Taylor and Francis, 4 Park Square, Milton Park, Abingdon, Oxfordshire, OX14 4RN,
United Kingdom
Abstract: In numerical simulations, concrete is usually considered as a three-phase material
consisting of an aggregate, a cement matrix, and an interfacial transition zone (ITZ).
Three-dimensional modeling of concrete usually requires extremely large computational
requirements. In this study, an improved random aggregate model for numerical simulations of
concrete is developed, which can minimize the number of elements, optimize the ITZ thickness,
and create internal cracks and holes. Numerical investigations on the cracks form as well as
deflection and tensile strength are also conducted based on three-point bending tests. The
simulation results agree well with the experimental results. Copyright © 2013 Vilnius Gediminas
Technical University (VGTU) Press.
Number of references: 24
Main heading: Aggregates
Controlled terms: Concretes - Cracks - Tensile strength - Three dimensional
Uncontrolled terms: Computational requirements - Concrete engineering - Interfacial
transition zone - Numerical investigations - Random aggregate model - Three point
bending - Three-dimensional modeling - Three-point bending test
Classification code: 406 Highway Engineering - 412 Concrete - 421 Strength of Building
Materials; Mechanical Properties - 902.1 Engineering Graphics
DOI: 10.3846/13923730.2012.760481
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
20130517 新增 11 条
1.
Accession number: 20131916313508
Title: Effective search space reduction for human pose estimation with Viterbi recurrence
algorithm
Authors: Han, Guijin1, 2 ; Zhu, Hong2 ; Ge, Jianrong3/;;;
Author affiliation: 1 Faculty of Automation and Information Engineering, Xi'an University of
Technology, Xi'an, 710048, China
2 School of Automation, Xi'an University of Posts and Telecommunications, Xi'an, 710121, China
3 Modern Education Technology Centre, Shijiazhuang Vocational Technology Institute,
Shijiazhuang, 050000, China
Corresponding author: Han, G. (hgjin123@126.com)
Source title: International Journal of Modelling, Identification and Control
Abbreviated source title: Int. J. Model. Ident. Control
Volume: 18
Issue: 4
Issue date: 2013
Publication year: 2013
Pages: 341-348
Language: English
ISSN: 17466172
E-ISSN: 17466180
Document type: Journal article (JA)
Publisher: Inderscience Enterprises Ltd., Editorial Office, P O Box 735, Olney, Bucks., MK46 5WB,
MK46 5WB, United Kingdom
Abstract: In this paper, an efficient algorithm for estimating human pose in static images is
presented, which is based on pictorial structure model and Viterbi recurrence algorithm. Our
algorithm mainly solves three problems in the process of estimating human pose: 1) for
overcoming the influence of illumination change and local deformation, a new part appearance
model based on HOG feature and SVM is presented; 2) for reducing search space, a new
approach using location prior and matching threshold is presented, which can also achieve
increasing the rate of convergence and improving the accuracy of human pose estimation; 3) an
inference algorithm using Viterbi recurrence algorithm is designed. Experiments results show this
new algorithm is more efficient. Copyright © 2013 Inderscience Enterprises Ltd.
Number of references: 27
Main heading: Viterbi algorithm
Controlled terms: Image matching - Inference engines
Uncontrolled terms: HOG feature - Human pose estimations - Pictorial structures Recurrence algorithms - Search spaces
Classification code: 723.1 Computer Programming - 723.4.1 Expert Systems - 741 Light,
Optics and Optical Devices
DOI: 10.1504/IJMIC.2013.053539
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number: 20131916319296
Title: Fabrication of alumina porous ceramics substrate by multilayer freeze-tape-casting
process
Authors: Han, Shendan1 ; Zhao, Kang1 ; Tang, Yufei1 ; Xu, Lei1/韩沈丹;赵康;汤玉斐;徐雷
Author affiliation: 1 School of Material Science and Engineering, Xi'an University of
Technology, Xi'an 710048, China
Corresponding author: Zhao, K. (kzhao@xaut.edu.cn)
Source title: Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society
Abbreviated source title: Kuei Suan Jen Hsueh Pao
Volume: 41
Issue: 2
Issue date: February 2013
Publication year: 2013
Pages: 140-144
Language: Chinese
ISSN: 04545648
CODEN: KSYHA5
Document type: Journal article (JA)
Publisher: Chinese Ceramic Society, Baiwanzhuang, Beijing, 100831, China
Abstract: In order to avoid co-firing and reduce the cracking failure caused by different
expansion rates of metal/ceramic composite heat sink, a method for the production of highly
aligned porous ceramics substrate by multilayer freeze-tape-casting process with aqueous
alumina slurry was proposed. The effects of solid content and freezing temperature on the
porosity and pore size were investigated, and the pore morphology (e.g., degree of pore
alignment, pore size and interconnection between the pores) of the fabricated samples was
characterized by field emission scanning electron microscopy. Furthermore, the thermal fatigue
properties of porous ceramic substrate were also examined. The results show that the porosity
(volume fraction) gradually decreases from 62.1% to 51.4% with the increase of solid content
(mass fraction) from 30% to 40%, and the pore size decreases gradually with the decrease of
freezing temperature from -15°C to -45°C. The optimum thermal fatigue properties were
obtained at the solid content of 40% and the freezing temperature of -45°C. Also, the pore
channels between the layers of ceramic substrate produced by multilayer freeze-tape-casting
process could be connected.
Number of references: 16
Main heading: Ceramic materials
Controlled terms: Alumina - Field emission microscopes - Freezing - Multilayers Pore size - Substrates - Thermal fatigue
Uncontrolled terms: Aqueous alumina slurry - Field emission scanning electron microscopy
- Freeze-drying - Freezing temperatures - Porosity and pore size - Porous ceramics
- Tape casting - Thermal fatigue properties
Classification code: 933.1 Crystalline Solids - 822.2 Food Processing Operations - 812.1
Ceramics - 951 Materials Science - 801 Chemistry - 461 Bioengineering and Biology 421 Strength of Building Materials; Mechanical Properties - 741.3 Optical Devices and
Systems
DOI: 10.7521/j.issn.0454-5648.2013.02.03
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number: 20131916310522
Title: Photoluminescence spectroscopic study of BaMgAl10O 17:Eu Phosphor coated with CaF2
via a sol-gel process
Authors: Li, Feng1, 2 ; Yang, Ying2 ; Song, Yang1 ; Wang, Wubao3 ; Yang, Wei3 ; Yang, Bingya3/
李峰;杨莺;;;;;
Author affiliation: 1 School of Material Science and Engineering, Xi'An University of
Technology, Xi'an 710048, China
2 School of Physical Science and Technology, Nanjing University of Aeronautics and Astronautics,
Nanjing 210016, China
3 IRICO Group Corporation, Xianyang 712000, China
Corresponding author: Li, F. (flsglf@gmail.com)
Source title: Journal of Spectroscopy
Abbreviated source title: J. Spectroscopy
Volume: 1
Issue: 1
Issue date: 2013
Publication year: 2013
Article number: 312519
Language: English
ISSN: 23144920
E-ISSN: 23144939
Document type: Journal article (JA)
Publisher: Hindawi Publishing Corporation, 410 Park Avenue, 15th Floor, 287 pmb, New York,
NY 10022, United States
Abstract: CaF2 coatings on the surface of BaMgAl10O 17:Eu (BAM) were prepared by a sol-gel
process, and the optical properties and antithermal degradation properties were analyzed by
photoluminescence spectra recorded under 254 nm and 147 nm excitation. The results indicate
that BAM particles were successfully coated with CaF 2 and CaF2 coatings show an interesting
property to enhance the blue emission intensity of BAM. The optimum antithermal degradation
properties were obtained at the weight ratio 0.4 wt% under 254 nm excitation and 0.3 wt% under
147 nm excitation, respectively. © 2013 Feng Li et al.
Number of references: 20
Main heading: Sol-gel process
Controlled terms: Coatings - Optical properties - Photoluminescence - Spectroscopic
analysis
Uncontrolled terms: Blue emission intensity - Photoluminescence spectrum Spectroscopic studies - Weight ratios
Classification code: 539 Metals Corrosion and Protection; Metal Plating - 741.1 Light/Optics
- 801 Chemistry - 813.1 Coating Techniques
DOI: 10.1155/2013/312519
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number: 20131916319625
Title: An advanced RFID localization algorithm based on region division and error compensation
Authors: Li, Junhuai1 ; Zhang, Guomou1 ; Yu, Lei1 ; Wang, Zhixiao1 ; Zhang, Jing1/李军怀;;;;张
璟
Author affiliation: 1 School of Computer Science and Engineering, Xi'an University of
Technology Xi'an, Shaanxi 710048, China
Corresponding author: Li, J. (lijunhuai@xaut.edu.cn)
Source title: KSII Transactions on Internet and Information Systems
Abbreviated source title: KSII Trans. Internet Inf. Syst.
Volume: 7
Issue: 4
Issue date: April 13, 2013
Publication year: 2013
Pages: 670-691
Language: English
E-ISSN: 19767277
Document type: Journal article (JA)
Publisher: Korean Society for Internet Information, 4th Floor, Unsan Building,, 646-6 Yeoksam
1-Dong, Gangnam-Gu,, 135-911, Korea, Republic of
Abstract: In RSSI-based RFID(Radio Frequency IDentification) indoor localization system, the
signal path loss model of each sub-region is different from others in the whole localization area
due to the influence of the multi-path phenomenon and other environmental factors. Therefore,
this paper divides the localization area into many sub-regions and constructs separately the signal
path loss model of each sub-region. Then an improved LANDMARC method is proposed. Firstly,
the deployment principle of RFID readers and tags is presented for constructing localization
sub-region. Secondly, the virtual reference tags are introduced to create a virtual signal strength
space with RFID readers and real reference tags in every sub-region. Lastly, k nearest neighbor
(KNN) algorithm is used to locate the target object and an error compensating algorithm is
proposed for correcting localization result. The results in real application show that the new
method enhances the positioning accuracy to 18.2% and reduces the time cost to 30% of the
original LANDMARC method without additional tags and readers. © 2013 KSII.
Number of references: 28
Main heading: Algorithms
Controlled terms: Error compensation - Radio frequency identification (RFID)
Uncontrolled terms: Environmental factors - Indoor localization systems - Indoor
locations - K nearest neighbor algorithm - Landmarc - Positioning accuracy Region division - Virtual reference tags
Classification code: 721.1 Computer Theory, Includes Formal Logic, Automata Theory, Switching
Theory, Programming Theory - 723 Computer Software, Data Handling and Applications 731.1 Control Systems - 921 Mathematics
DOI: 10.3837/tiis.2013.04.004
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number: 20131916309762
Title: Large area photoconductive terahertz emitter for 1.55 μm excitation based on an InGaAs
heterostructure
Authors: Mittendorff, Martin1, 2 ; Xu, Ming1, 3 ; Dietz, Roman J. B.4 ; Künzel, Harald4 ; Sartorius,
Bernd4 ; Schneider, Harald1 ; Helm, Manfred1, 2 ; Winnerl, Stephan1/徐鸣
Author affiliation: 1 Helmholtz-Zentrum Dresden-Rossendorf, PO Box 510119, D-01314
Dresden, Germany
2 Technische Universität Dresden, D-01062 Dresden, Germany
3 Department of Applied Physics, Xi'An University of Technology, PO Box 904, Xi'an, Shaanxi,
710048, China
4 Fraunhofer Institute for Telecommunication, Heinrich-Hertz-Institute, Einsteinufer 37,
D-10587 Berlin, Germany
Source title: Nanotechnology
Abbreviated source title: Nanotechnology
Volume: 24
Issue: 21
Issue date: May 31, 2013
Publication year: 2013
Article number: 214007
Language: English
ISSN: 09574484
E-ISSN: 13616528
CODEN: NNOTER
Document type: Journal article (JA)
Publisher: Institute of Physics Publishing, Temple Circus, Temple Way, Bristol, BS1 6BE, United
Kingdom
Abstract: We present scalable large area terahertz (THz) emitters based on a nanoscale
multilayer InGaAs/InAlAs heterostructure and a microstructured electrode pattern. The emitters
are designed for pump lasers working at the telecommunication wavelength of 1.55 μm. Electric
THz fields of more than 2.5 V cm-1 are reached with moderate pump powers of 80 mW, the
corresponding spectrum extends up to 3 THz. The saturation characteristics have been
investigated for different pump laser spot sizes. For small pump powers of less than 50 mW the
emitted THz field is nearly independent of the spot size, for higher pump powers and small spot
sizes a clear saturation of the generated THz pulse can be observed. Hence the use of scalable
emitters is especially promising for high power fibre laser systems. The spectral content of the
generated radiation is nearly independent of the parameters spot size, pump power, and bias
voltage, which allows for stable operation in spectroscopic applications. © 2013 IOP Publishing
Ltd.
Number of references: 38
Main heading: Pumping (laser)
Controlled terms: Nanostructured materials - Nanotechnology
Uncontrolled terms: High power fibre laser - Microstructured electrodes - Nanoscale
multilayers - Photoconductive terahertz emitters - Saturation characteristic - Scalable
emitters - Spectroscopic application - Telecommunication wavelengths
Classification code: 744.1 Lasers, General - 761 Nanotechnology
DOI: 10.1088/0957-4484/24/21/214007
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number: 20131916319333
Title: Microwave hydrothermal synthesis of anatanse nanotubes and their photocatalytic
performance
Authors: Niu, Jinfen1 ; Yao, Binghua1 ; Peng, Chao1 ; Zhang, Fanhong1/钮金芬;姚秉华;彭超;
张凡宏
Author affiliation: 1 School of Science, Xi'an University of Technology, Xi'an 710054, China
Corresponding author: Niu, J. (niujinfen@xaut.edu.cn)
Source title: Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society
Abbreviated source title: Kuei Suan Jen Hsueh Pao
Volume: 41
Issue: 1
Issue date: January 2013
Publication year: 2013
Pages: 83-88
Language: Chinese
ISSN: 04545648
CODEN: KSYHA5
Document type: Journal article (JA)
Publisher: Chinese Ceramic Society, Baiwanzhuang, Beijing, 100831, China
Abstract: Titanate nanotubes (TNT) were firstly prepared with anatanse particles (TO) as a
precursor by a concentrated alkaline hydrothermal method, and then anatanse titania nanotubes
(WTNT) were synthesized with TNT as a raw material by a microwave hydrothermal method. The
adsorption and photocatalytic degradation performance of tetracycline hydrochloride (TC) were
evaluated under dark condition and visible light irradiation. The products were characterized with
X-ray diffraction, transmission electron microscope, and UV-visible diffuse reflectance
spectroscopy, respectively. The results show that the as-prepared WTNT samples synthesized
under 2.0 MPa is single-crystalline anatase. The WTNT samples treated after microwave
hydrothermal treatment appear a hollow tubular structure with the outer diameter of 10 nm and
the length of approximately 100-200 nm. The band gap of TNT and WTNT are greater than that of
TO precursor. The adsorption process of TC on three catalysts can be described by a
pseudo-second-order kinetics model. The WTNT exhibits a superior photocatalytic degradation
capability to TC under visible light irradiation.
Number of references: 14
Main heading: Nanotubes
Controlled terms: Adsorption - Hydrothermal synthesis - Mesoporous materials Microwaves - Photocatalysis - Photodegradation - Transmission electron microscopy
- X ray diffraction
Uncontrolled terms: Anatanse - Microwave hydrothermal - Microwave hydrothermal
method - Microwave hydrothermal synthesis - Microwave-hydrothermal treatment Tetracycline hydrochloride - Transmission electron microscope - UV-visible diffuse
reflectance spectroscopy
Classification code: 931.3 Atomic and Molecular Physics - 931.2 Physical Properties of Gases,
Liquids and Solids - 802.3 Chemical Operations - 802.2 Chemical Reactions - 761
Nanotechnology - 741.3 Optical Devices and Systems - 711 Electromagnetic Waves
DOI: 10.7521/j.issn.0454-5648.2013.01.17
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number: 20131916319287
Title: Influence of boron-doping amount on microstructure, optical and electrical properties of
P-type a-Si: H films
Authors: Shi, Huiying1 ; Dong, Dan1 ; Jiang, Bailing1 ; Lu, Yuanyuan1 ; Liu, Ning1/时惠英;董丹;
蒋百灵;卢媛媛
Author affiliation: 1 School of Materials Science and Engineering, Xi'an University of
Technology, Xi'an 710048, China
Corresponding author: Shi, H. (hy-shi@163.com)
Source title: Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society
Abbreviated source title: Kuei Suan Jen Hsueh Pao
Volume: 41
Issue: 3
Issue date: March 2013
Publication year: 2013
Pages: 364-369
Language: Chinese
ISSN: 04545648
CODEN: KSYHA5
Document type: Journal article (JA)
Publisher: Chinese Ceramic Society, Baiwanzhuang, Beijing, 100831, China
Abstract: A series of P-type a-Si: H films with different flow rates of borane were prepared by a
plasma enhanced chemical vapor deposition method. The influence of boron-doping amount on
the microstructures and properties of a-Si:H films was analyzed. The P-type a-Si: H film with the
optimal boron-doped amount was annealed in vacuum so as to investigate the influence of the
film crystal structure change on the properties. The results indicate that with the increase of
boron-doping amount, the microstructures of P type a-Si: H films have no substantial change, and
the band gaps and electrical properties appear varying. The optimum boron-doping amount was
proven to be 1.0%. The band gap of a-Si: H film decreased from 1.81 to 1.72 eV and the
conductivity increased by 3 orders of magnitude after annealing. The crystal structure of film
could improve the electrical properties rather than the boron-doping ratio.
Number of references: 16
Main heading: Semiconductor doping
Controlled terms: Annealing - Electric conductivity - Electric properties - Energy gap
- Metallic films - Microstructure - Plasma enhanced chemical vapor deposition Silicon
Uncontrolled terms: a-Si:H - Boron-doped - Boron-doping - Hydrogenated
amorphous silicon films - In-vacuum - Microstructures and properties - Optical and
electrical properties - Orders of magnitude
Classification code: 933 Solid State Physics - 932.3 Plasma Physics - 931.3 Atomic and
Molecular Physics - 714.2 Semiconductor Devices and Integrated Circuits - 951 Materials
Science - 712.1.1 Single Element Semiconducting Materials - 539 Metals Corrosion and
Protection; Metal Plating - 537.1 Heat Treatment Processes - 531 Metallurgy and
Metallography - 701.1 Electricity: Basic Concepts and Phenomena
DOI: 10.7521/j.issn.0454-5648.2013.03.15
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number: 20131916309724
Title: Depth adaptive zooming visual servoing for a robot with a zooming camera
Authors: Xin, Jing1 ; Chen, Kemin1 ; Bai, Lei1 ; Liu, Ding1 ; Zhang, Jian2/辛菁;;;刘丁;;
Author affiliation: 1 School of Automation and Information Engineering, Xi'An University of
Technology, China
2 Faculty of Engineering and Information Technology, University of Technology (UTS), Sydney,
Australia
Corresponding author: Xin, J. (xinj@xaut.edu.cn)
Source title: International Journal of Advanced Robotic Systems
Abbreviated source title: Int. J. Adv. Rob. Syst.
Volume: 10
Issue date: February 12, 2013
Publication year: 2013
Article number: 120
Language: English
ISSN: 17298806
E-ISSN: 17298814
Document type: Journal article (JA)
Publisher: InTech Europe, Slavka Krautzeka 83/A, 51000 Rijeka, Croatia, 51000, Croatia
Abstract: To solve the view visibility problem and keep the observed object in the field of view
(FOV) during the visual servoing, a depth adaptive zooming visual servoing strategy for a
manipulator robot with a zooming camera is proposed. Firstly, a zoom control mechanism is
introduced into the robot visual servoing system. It can dynamically adjust the camera's field of
view to keep all the feature points on the object in the field of view of the camera and get high
object local resolution at the end of visual servoing. Secondly, an invariant visual servoing
method is employed to control the robot to the desired position under the changing intrinsic
parameters of the camera. Finally, a nonlinear depth adaptive estimation scheme in the invariant
space using Lyapunov stability theory is proposed to estimate adaptively the depth of the image
features on the object. Three kinds of robot 4DOF visual positioning simulation experiments are
conducted. The simulation experiment results show that the proposed approach has higher
positioning precision. © 2013 Xin et al.
Number of references: 22
Main heading: Visual servoing
Controlled terms: Cameras - Estimation - Experiments - Manipulators - Robots
Uncontrolled terms: Adaptive estimation - Intrinsic parameters - Lyapunov stability
theory - Manipulator robots - Positioning precision - Robot visual servoing - Visual
positioning - Visual servoing methods
Classification code: 731 Automatic Control Principles and Applications - 732 Control Devices
- 742.2 Photographic Equipment - 901.3 Engineering Research - 921 Mathematics
DOI: 10.5772/54566
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number: 20131916312483
Title: Corrosion behavior of AZ91/AZ91-0.4%Nd alloys in 3.5wt.% NaCl
Authors: Zhang, Jumei1 ; Wang, Zhihu2 ; Cai, Hui1 ; Zhu, Ming1 ; Niu, Libin1/张菊梅;王志虎;蔡
辉;朱明;;
Author affiliation: 1 School of Materials Science and Engineering, Xi'an University of Science
and Technology, Xian 710054, China
2 School of Materials Science and Engineering, Xi'an University of Technology, Xian 710048,
China
Corresponding author: Zhang, J. (feiyue-zjm@163.com)
Source title: Applied Mechanics and Materials
Abbreviated source title: Appl. Mech. Mater.
Volume: 291-294
Monograph title: Advances in Energy Science and Technology
Issue date: 2013
Publication year: 2013
Pages: 699-702
Language: English
ISSN: 16609336
E-ISSN: 16627482
ISBN-13: 9783037856345
Document type: Conference article (CA)
Conference name: 2012 International Conference on Sustainable Energy and Environmental
Engineering, ICSEEE 2012
Conference date: December 29, 2012 - December 30, 2012
Conference location: Guangzhou, China
Conference code: 95887
Publisher: Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635, Switzerland
Abstract: The microstructure and corrosion behavior of commercial AZ91/AZ91-0.4%Nd alloys
were investigated by OM, immersion test and weight-loss method. It was found that the number
of Nd element in the AZ91 magnesium alloy has effect on the grain refining efficiency, the coarse
β-Mg17Al12 phase distributed along the grain boundaries transformed into granular, and the
granular or acicular Al3Nd phase precipitated in matrix. The addition of Nd element significantly
reduces the corrosion rate of AZ91-0.4%Nd magnesium alloy, as a result the corrosion resistance
of alloy was improved obviously. © (2013) Trans Tech Publications, Switzerland.
Number of references: 8
Main heading: Neodymium
Controlled terms: Corrosion resistance - Corrosive effects - Grain boundaries Magnesium alloys - Microstructure - Neodymium alloys
Uncontrolled terms: Addition of nd - AZ91 magnesium alloys - Corrosion behavior Grain refining efficiency - Immersion tests - Mg17Al12 phase - Weight loss method
Classification code: 933.1 Crystalline Solids - 933 Solid State Physics - 804 Chemical
Products Generally - 951 Materials Science - 803 Chemical Agents and Basic Industrial
Chemicals - 542.2 Magnesium and Alloys - 539.1 Metals Corrosion - 547.2 Rare Earth
Metals
DOI: 10.4028/www.scientific.net/AMM.291-294.699
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
10.
Accession number: 20131916319680
Title: Multi-channel access technology based on wavelength division multiplexing in wireless
UV communication mesh network
Authors: Zhao, Tai-fei1 ; Zhang, Ai-li1 ; Xue, Rong-li1/赵太飞;;
Author affiliation: 1 Faculty of Automation and Information Engineering, Xi'an University of
Technology, Xi'an, 710048, China
Corresponding author: Zhao, T. (year623@163.com)
Source title: Optoelectronics Letters
Abbreviated source title: Optoelectron. Lett.
Volume: 9
Issue: 3
Issue date: 2013
Publication year: 2013
Pages: 208-212
Language: English
ISSN: 16731905
Document type: Journal article (JA)
Publisher: Springer Verlag, Tiergartenstrasse 17, Heidelberg, D-69121, Germany
Abstract: In this paper, the multi-channel access technology of wavelength division multiplexing
(WDM) in the wireless ultraviolet (UV) scattering communication is studied. A multi-interface and
multi-channel device is deployed in each UV transceiver node. The band-pass filter is configured
in the receiving node so as to realize the multi-channel access by use of the UV WDM technology.
Both the UV communication node model and the UV channel model are established. Three types
of UV no-line-of-sight (NLOS) multi-channel communications are simulated in the mesh
topologies with NS2. The results show that the UV multi-channel access technology can increase
network throughput effectively with using WDM. © 2013 Tianjin University of Technology and
Springer-Verlag Berlin Heidelberg.
Number of references: 15
Main heading: Wavelength division multiplexing
Controlled terms: Bandpass filters - Communication
Uncontrolled terms: Access technology - Mesh topologies - Multichannel
communication - Multichannel devices - Network throughput - Receiving nodes UV communication - WDM technology
Classification code: 703.2 Electric Filters - 716 Telecommunication; Radar, Radio and
Television
DOI: 10.1007/s11801-013-2398-7
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
11.
Accession number: 20131916319441
Title: Reliability evaluation of high-speed train bearing with minimum sample
Authors: Zhu, Dexin1 ; Liu, Hongzhao1/朱德馨;刘宏昭
Author affiliation: 1 Faculty of Mechanical and Precision Instrumental Engineering, Xi'an
University of Technology, Xi'an 710048, China
Corresponding author: Zhu, D. (zdx_cn@163.com)
Source title: Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University
(Science and Technology)
Abbreviated source title: Zhongnan Daxue Xuebao (Ziran Kexue Ban)
Volume: 44
Issue: 3
Issue date: March 2013
Publication year: 2013
Pages: 963-969
Language: Chinese
ISSN: 16727207
CODEN: ZDXZAC
Document type: Journal article (JA)
Publisher: Central South University of Technology, Hunan, Changsha, 410083, China
Abstract: For the problem of reliability evaluation about the high-speed train bearings in the
case of minimum sample and zero-failure reliability test evaluation, the prior information and the
experimental information were fused using Bayes data statistical theory, and the mathematical
model of the accumulation failure probability was established. According to the least square
method, the undetermined parameters of the two parameter Weibull distribution were solved
and the reliability mathematical model was obtained about the high-speed train bearing. The
results show that the problem of the high-speed train bearing's reliability evaluation is worked
out in the minimum sample and zero-failure situation and a method is provided for evaluating
the high-speed train bearing's reliability and the safety.
Number of references: 15
Main heading: Railroad cars
Controlled terms: Least squares approximations - Mathematical models - Railroads Reliability - Weibull distribution
Uncontrolled terms: Bayes method - Failure Probability - High speed trains - Least
square methods - Minimum sample - Prior information - Reliability Evaluation Statistical theory
Classification code: 681 Railway Plant and Structures - 682 Railroad Rolling Stock 682.1.1 Railroad Cars - 921 Mathematics - 921.6 Numerical Methods - 922.2
Mathematical Statistics
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
20130524 新增 8 条
1.
Accession number: 20132016340261
Title: Effect of high-temperature aging treatment on properties of welded 310S stainless steel
Authors: Chen, Wen-Ge1 ; He, Jian-Xiang2 ; Xie, Xiao-Bin2 ; Zhang, Hui1/陈文革;何建祥;谢小彬;
张辉
Author affiliation: 1 Department of Materials Science and Engineering, Xi'an University of
Technology, Xi'an 710048, China
2 Xi'an Sunrise Technology Co Ltd, Xi'an 710002, China
Corresponding author: Chen, W.-G. (wgchen001@263.net)
Source title: Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment
Abbreviated source title: Cailiao Rechuli Xuebao
Volume: 34
Issue: 4
Issue date: April 2013
Publication year: 2013
Pages: 95-99
Language: Chinese
ISSN: 10096264
CODEN: JRXUDO
Document type: Journal article (JA)
Publisher: Editorial Office of Transactions of Materials, 18 Xueqing Road, Beijing, 100083, China
Abstract: Influence of carbon and sulfur in the atmosphere of coal firing on properties of
welded 310S stainless steel before and after high-temperature aging treatment was studied by
means of OM, SEM/EDX, XRD and impact and tensile tests. The results show that the aged
sample by the different heat treatment suffers more severe corrosion than the unaged sample.
The formation of σ phase due to aging treatment above 700°C, redues Cr content around grain
boundaries in 310S stainless steel, which results in the decrease of corrosion resistance of 310S
stainless steel. At the same time, grain grows, impact toughness is reduced significantly, and
fracture mode changes from microvoid coalescence ductile fracture to cleavage fracture.
Number of references: 12
Main heading: Stainless steel
Controlled terms: Aging of materials - Brittle fracture - Carbon - Coalescence Corrosion resistance - Ductile fracture - Grain boundaries - Sulfur - Tensile testing
- Welding
Uncontrolled terms: Aging treatment - Cleavage fracture - Coal firing - Cr content Fracture mode - High temperature aging - Severe corrosion - Tensile tests
Classification code: 804 Chemical Products Generally - 801.3 Colloid Chemistry - 545.3
Steel - 933.1 Crystalline Solids - 539.1 Metals Corrosion - 422.2 Strength of Building
Materials : Test Methods - 421 Strength of Building Materials; Mechanical Properties 538.2 Welding
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number: 20132016323583
Title: Phenylene-thiophene oligomer derivatives for thin-film Transistors: Structure and
semiconductor performances
Authors: Duan, Zongfan1, 2 ; Ohuchi, Hirokuni2 ; Yanagi, Yuichiro2 ; Takayanagi, Yutaro2 ; Zhao,
Gaoyang1 ; Nishioka, Yasushiro2/段宗范;;;
Author affiliation: 1 School of Materials Science and Engineering, Xi'an University of
Technology, Xi'an, Shaanxi 710048, China
2 College of Science and Technology, Nihon University, Funabashi, Chiba 274-8501, Japan
Source title: Japanese Journal of Applied Physics
Abbreviated source title: Jpn. J. Appl. Phys.
Volume: 52
Issue: 3 PART 2
Monograph title: Active-Matrix Flatpanel Displays and Devices - TFT Technologies and FPD
Materials
Issue date: March 2013
Publication year: 2013
Article number: 03BB07
Language: English
ISSN: 00214922
E-ISSN: 13474065
Document type: Journal article (JA)
Publisher: Japan Society of Applied Physics, 1-12-3 Kudan-Kita,k Chiyoda-ku, Tokyo, 102, Japan
Abstract: Two phenylene-thiophene oligomer derivatives, 2,8-bis[5-(4-n-hexylphenyl)2-thienyl]dibenzothiophene (28HPTDBT) and 3,7-bis[5-(4-nhexylphenyl)2-thienyl]dibenzothiophene (37HPTDBT), were used as active materials in thin-film organic
field-effect transistors (OFETs). Although the two molecules have similar structures, they
exhibited obvious differences in photophysical, crystal, φ-stacking, and electrical properties.
28HPTDBT is an amorphous material and hence showed no semiconductor characteristics in its
thin-film OFETs, while 37HPTDBT exhibited high crystallinity and strong φ-stacking in the solid
state, thus resulting in high charge carrier mobilities. The effects of gate insulators and annealing
treatment on transistor performances were also investigated. Thin-film OFETs based on
37HPTDBT with an octadecanyltrichlorosilane (OTS)-treated SiO2 gate insulator exhibited
excellent field-effect performances with a maximum mobility of 0.3 cm2 V-1 s-1 and a high
Ion=Ioff current ratio of 1:5 × 10. Although annealing treatment improved the crystallinity of the
thin films, the appearance of voids (cracks) resulted in a decrease in the charge carrier mobilities
in the OFETs. © 2013 The Japan Society of Applied Physics.
Number of references: 26
Main heading: Thin film transistors
Controlled terms: Carrier mobility - Display devices - Electric properties - Oligomers
- Organic field effect transistors - Thiophene
Uncontrolled terms: Active material - Annealing treatments - Crystallinities - Current
ratios - Dibenzothiophenes - High crystallinity - Organic field-effect transistor (OFETs)
- Transistor performance
Classification code: 701.1 Electricity: Basic Concepts and Phenomena - 714.2
Semiconductor Devices and Integrated Circuits - 722.2 Computer Peripheral Equipment 804 Chemical Products Generally - 804.1 Organic Compounds - 933 Solid State Physics
DOI: 10.7567/JJAP.52.03BB07
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number: 20131916321804
Title: Tracking and identification for GPS/DR integrated navigation system with unknown
parameters
Authors: Li, Jiang1 ; Qian, Fu-Cai1, 2 ; Liu, Ding1 ; Hu, Shao-Lin1/李江;钱富才;刘丁;胡绍林
Author affiliation: 1 School of Automation and Information Engineering, Xi'an University of
Technology, Xi'an 710048, China
2 State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an
710054, China
Corresponding author: Li, J. (lijiang0613@163.com)
Source title: Dianzi Yu Xinxi Xuebao/Journal of Electronics and Information Technology
Abbreviated source title: Dianzi Yu Xinxi Xuebao
Volume: 35
Issue: 4
Issue date: April 2013
Publication year: 2013
Pages: 921-926
Language: Chinese
ISSN: 10095896
CODEN: DKXUEC
Document type: Journal article (JA)
Publisher: Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China
Abstract: This paper propses a filtering method for GPS/DR (Global Positioning
System/Dead-Reckoning) integrated navigation system with unknown parameters. This method
firstly structures a self-organizing state space model, and then estimates the state vector by using
Monte Carlo filtering method for this new system model. Because particle filter is easy to make a
search of the unknown parameters into a subset of the initial sampling for the self-organization
model an artificial fish swarm-partical filter algorithm is put forward. The algorithm not only can
estimate the system state, but also can make the sampling distribution of the unknown
parameters move to the true parameter distribution. Ultimately, the true value of the unknown
parameters are identified. The simuliation results show the effectiveness of the proposed
method.
Number of references: 15
Main heading: Monte Carlo methods
Controlled terms: Algorithms - Identification (control systems) - Navigation systems State space methods
Uncontrolled terms: Artificial fish swarm algorithms - GPS/DR integrated navigations Integrated navigation systems - MONTE CARLO - Monte Carlo filtering - Parameter
distributions - Sampling distribution - Self-organizing state space models
Classification code: 434.4 Waterway Navigation - 723 Computer Software, Data Handling
and Applications - 731.1 Control Systems - 921 Mathematics - 922.2 Mathematical
Statistics
DOI: 10.3724/SP.J.1146.2012.01065
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number: 20132016340265
Title: Effect of dual phase treatment on microstructure and mechanical properties of S135 drill
pipe steel
Authors: Luo, She-Ji1, 2 ; Wang, Rong2 ; Zhao, Kang1/雒设计;王荣;赵康
Author affiliation: 1 School of Materials Science and Engineering, Xi'an University of
Technology, Xi'an 710048, China
2 School of Materials Science and Engineering, Xi'an Shiyou University, Xi'an 710065, China
Corresponding author: Luo, S.-J. (sjluo@xsyu.edu.cn)
Source title: Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment
Abbreviated source title: Cailiao Rechuli Xuebao
Volume: 34
Issue: 4
Issue date: April 2013
Publication year: 2013
Pages: 118-122
Language: Chinese
ISSN: 10096264
CODEN: JRXUDO
Document type: Journal article (JA)
Publisher: Editorial Office of Transactions of Materials, 18 Xueqing Road, Beijing, 100083, China
Abstract: Effects of dual phase treatment on microstructure and mechanical properties of S135
drill pipe steel were studied by means of optical microscope (OM), scanning electron microscopy
(SEM) and mechanical property testing. The results show that the ferrite-martensite dual phase
microstructure is obtained for the steel heat-treated at the temperatures of 760-800°C. With
increasing of dual-phase treatment temperature, the volume of martensite increases and the
volume of ferrite decreases, the strength and hardness of the steel increase, the plasticity and
toughness of the steel decrease, the fracture mode changes from ductile fracture to brittle
fracture. The work-hardening exponent of the steel increases, and two n values are observed for
the steel after dual-phase treatment.
Number of references: 13
Main heading: Drill pipe
Controlled terms: Brittle fracture - Ductile fracture - Martensitic steel - Mechanical
properties - Microstructure - Scanning electron microscopy - Steel pipe
Uncontrolled terms: Dual phase microstructure - Dual-phase treatment - Fracture mode
- Fracture morphology - Mechanical property testing - Microstructure and mechanical
properties - Optical microscopes - Treatment temperature
Classification code: 421 Strength of Building Materials; Mechanical Properties - 511.2 Oil
Field Equipment - 545.3 Steel - 741.1 Light/Optics - 933 Solid State Physics - 951
Materials Science
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number: 20131916320759
Title: Accurate measurement of the jitter time of GaAs photoconductive semiconductor
switches triggered by a one-to-two optical fiber
Authors: Shi, Wei1, 2 ; Zhang, Lin1 ; Gui, Huaimeng1 ; Hou, Lei1 ; Xu, Ming1 ; Qu, Guanghui1/施
卫;张林;;侯磊;徐鸣;屈光辉
Author affiliation: 1 Applied Physics Department, Xi'An University of Technology, Xi'an 710048,
China
2 State Key Laboratory of Transient Optics and Photonics, Xi'An Institute of Optics and Precision
Mechanics, Xi'an 710119, China
Source title: Applied Physics Letters
Abbreviated source title: Appl Phys Lett
Volume: 102
Issue: 15
Issue date: April 15, 2013
Publication year: 2013
Article number: 154106
Language: English
ISSN: 00036951
CODEN: APPLAB
Document type: Journal article (JA)
Publisher: American Institute of Physics, 2 Huntington Quadrangle, Suite N101, Melville, NY
11747-4502, United States
Abstract: An improved method is proposed to measure the jitter time of the photoconductive
semiconductor switches (PCSSs). A one-to-two fiber is utilized to separate and guide the 1053 nm
laser beam to trigger two identical 3-mm-gap GaAs PCSSs synchronously. The jitter time is
derived from the time lags of two switches turn-on by the error transfer theory. At a bias voltage
of 1 kV, the jitter time is measured as 14.41 ps, which is the lowest jitter of GaAs PCSS that has
been reported so far. © 2013 AIP Publishing LLC.
Number of references: 15
Main heading: Time switches
Controlled terms: Gallium arsenide - Jitter - Optical fibers - Photoconductive
switches - Semiconducting gallium
Uncontrolled terms: 1053 nm - Accurate measurement - GaAs - Jitter-time Photoconductive semiconductor switches - Time lag
Classification code: 741.1.2 Fiber Optics - 718 Telephone Systems and Related Technologies;
Line Communications - 717 Optical Communication - 804 Chemical Products Generally 716 Telecommunication; Radar, Radio and Television - 714.2 Semiconductor Devices and
Integrated Circuits - 712.1.1 Single Element Semiconducting Materials - 715 Electronic
Equipment, General Purpose and Industrial
DOI: 10.1063/1.4802755
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number: 20132016337961
Title: Single-channel color image encryption based on iterative fractional Fourier transform
Authors: Sui, Liansheng1 ; Gao, Bo1/隋连升;高博
Author affiliation: 1 School of Computer Science and Engineering, Xi'an University of
Technology, Xi'an, China
Source title: Proceedings of the 2012 4th International Symposium on Information Science and
Engineering, ISISE 2012
Abbreviated source title: Proc. Int. Symp. Inf. Sci. Eng., ISISE
Monograph title: Proceedings of the 2012 4th International Symposium on Information Science
and Engineering, ISISE 2012
Issue date: 2012
Publication year: 2012
Pages: 287-291
Article number: 6495348
Language: English
ISBN-13: 9780769549514
Document type: Conference article (CA)
Conference name: 2012 4th International Symposium on Information Science and Engineering,
ISISE 2012
Conference date: December 14, 2012 - December 16, 2012
Conference location: Shanghai, China
Conference code: 96852
Sponsor: Shanghai Institute of Electronics; Shanghai Jiaotong University; Fudan University;
Peoples' Friendship University of Russia; Feng Chia University
Publisher: IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC 20036-4928,
United States
Abstract: A single-channel color image encryption is proposed based on iterative fractional
Fourier transform. The color image to be encrypted is first separated into three independent
channels: red, green and blue. Then, the red and green components are encrypted into a single
one based on iterative fractional Fourier transform. Similarly, the interim image and blue
component are encrypted into the final gray scale ciphertext with stationary white noise
distribution, which has camouflage property to some extent. In the process of encryption and
decryption, three different groups of fractional orders, five private phase functions and one
common phase function are used as keys to enhance the security of the proposed system.
Additionally, the proposed iterative fractional Fourier transform algorithm has faster convergent
speed. Simulation results verify the feasibility and effectiveness of this method. © 2012 IEEE.
Number of references: 21
Main heading: Cryptography
Controlled terms: Image processing - Information science - Iterative methods White noise
Uncontrolled terms: Color image encryptions - Convergent speed - Encryption and
decryption - Fractional Fourier transforms - Independent channels - Noise distribution
- Red , green and blues - Single-channel
Classification code: 903 Information Science - 741 Light, Optics and Optical Devices -
723 Computer Software, Data Handling and Applications - 921.6 Numerical Methods - 718
Telephone Systems and Related Technologies; Line Communications - 716 Telecommunication;
Radar, Radio and Television - 711 Electromagnetic Waves - 717 Optical Communication
DOI: 10.1109/ISISE.2012.72
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number: 20132016329377
Title: Degradation of levofloxacin by sonolysis-assisted H2O2 in aqueous solution
Authors: Wei, Hong1 ; Li, Juan1 ; Li, Ke-Bin2 ; Hu, Da1/魏红;李娟;李克斌;胡妲
Author affiliation: 1 Key Laboratory of Northwest Water Resources, Environment and Ecology,
Ministry of Education, Xi'an University of Technology, Xi'an 710048, China
2 Key Laboratory of Synthetic and Natural Functional Molecule Chemistry of Ministry of
Education, School of Chemistry and Material Science, Northwest University, Xi'an 710069, China
Corresponding author: Wei, H. (weihong0921@163.com)
Source title: Zhongguo Huanjing Kexue/China Environmental Science
Abbreviated source title: Zhongguo Huanjing Kexue
Volume: 33
Issue: 2
Issue date: February 2013
Publication year: 2013
Pages: 257-262
Language: Chinese
ISSN: 10006923
CODEN: ZHKEEI
Document type: Journal article (JA)
Publisher: Editorial Board of China Environmental Science, No.54 Hongliannancun, Haidian
District, Beijing, 100082, China
Abstract: An ultrasonic/H2O2 system was used to degrade levofloxacin, and some influencing
factors such as H2O2 concentration, ultrasonic power and initial pH value were investigated. The
results indicated that the ultrasonic/H2O2 system had a marked synergetic effect in the removal
rate of levofloxacin compared with the single ultrasonic and the oxidation of H2O2. The
degradation rate of levofloxcin increased with the increase of H2O2 concentration in the range of
3.0-20.0 mmol/L, and an ultrasonic power of 260 W could result into the optimum degradation
rate. The degradation amount of levofloxacin increased with the increase of its initial
concentration. The degradation rate of levofloxcin could reach a maximum value at initial pH 7.14
of the unbuffered solution. The high performance liquid chromatography spectrum results
showed that two main products were generated during the reaction, however, which were
dependent on the pH value of the solution.
Number of references: 23
Main heading: pH
Controlled terms: Degradation - High performance liquid chromatography - Hydrogen
peroxide - Ultrasonics
Uncontrolled terms: Degradation rate - HPLC spectrum - Initial concentration - Initial
pH value - Levofloxacin - pH value - Synergetic effect - Ultrasonic power
Classification code: 753.1 Ultrasonic Waves - 801 Chemistry - 801.1 Chemistry, General
- 802.2 Chemical Reactions - 804.2 Inorganic Compounds
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number: 20132016340694
Title: Characterization of the lattice mismatched In0.68Ga0.32As Material Grown on InP
substrate by MOCVD
Authors: Zhu, Ya-Qi1, 2 ; Chen, Zhi-Ming1 ; Lu, Shu-Long2 ; Ji, Lian2 ; Zhao, Yong-Ming2 ; Tan,
Ming1, 2/朱亚旗;陈治明;陆书龙;季莲;赵勇明;谭明
Author affiliation: 1 Automation and Information Engineering Institute, Xi'an University of
Technology, Xi'an 710054, China
2 Suzhou Institute of Nano-Tech. and Nano-Bionics, Nano Devices FLOTU, Suzhou 215125,
China
Corresponding author: Zhu, Y.-Q. (zhuyaqi781@163.com)
Source title: Hongwai Yu Haomibo Xuebao/Journal of Infrared and Millimeter Waves
Abbreviated source title: Hongwai Yu Haomibo Xuebao
Volume: 32
Issue: 2
Issue date: April 2013
Publication year: 2013
Pages: 118-121
Language: Chinese
ISSN: 10019014
CODEN: HHXUEZ
Document type: Journal article (JA)
Publisher: Chinese Optical Society, 420 Zhong Shan Bei Yi Road, Shanghai, 200083, China
Abstract: The lattice mismatched In0.68Ga0.32 As materials were grown on InP substrate by
MOCVD technology. InAsxP1-x metamorphic buffer layer structures with various As compositions
were grown on InP substrates, which forms an alternative tension and strain offset buffer
structure, In this way, we got a strain relaxed InAsxP1-x "virtual" substrate, which is lattice
matched to In0.68Ga0.32As. With an optimized thickness of the buffer layer, the strain was
completely relaxed in the "virtual" substrate. The analysis of AFM, HRXRD, TEM and
photoluminescence(PL) indicated that this method can effectively improve the quality of the
In0.68Ga0.32As material.
Number of references: 13
Main heading: Gallium alloys
Controlled terms: Gallium - Strain relaxation - Substrates
Uncontrolled terms: Buffer structures - HRXRD - InAs - InP substrates Lattice-matched - Lattice-mismatched - Metamorphic buffer layer - Strain-relaxed
Classification code: 461 Bioengineering and Biology - 549.3 Nonferrous Metals and Alloys
excluding Alkali and Alkaline Earth Metals - 801 Chemistry
DOI: 10.3724/SP.J.1010.2013.00118
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
-
933.1 Crystalline Solids
20130601 新增 3 条
1.
Accession number: 20132116352554
Title: A two-stage method for haze removal with a single image
Authors: Shi, Zhenghao1 ; Yang, Huandi1 ; Zhao, Minghua1 ; Wang, Yinghui1 ; He, Lifeng2/石争
浩;;赵明华;王映辉;何立峰
Author affiliation: 1 School of Computer Science and Engineering, Xi'an University of
Technology, No. 5, South Jinhua Road, Xi'an 710048, China
2 School of Information Science and Technology, Aichi Prefectural University, 1522-3
Ibaragabasama, Nagakute, Aichi 480-1198, Japan
Corresponding author: Shi, Z. (ylshi@xaut.edu.cn)
Source title: ICIC Express Letters
Abbreviated source title: ICIC Express Lett.
Volume: 7
Issue: 8
Issue date: 2013
Publication year: 2013
Pages: 2429-2435
Language: English
ISSN: 1881803X
Document type: Journal article (JA)
Publisher: ICIC Express Letters Office, Tokai University, Kumamoto Campus, 9-1-1, Toroku,
Kumamoto, 862-8652, Japan
Abstract: Dark channel prior, proposed by He, is one of the most successful haze removal
methods with a single image in recent years. However, the method may suffer invalidity when the
scene object is inherently similar to the air light over a large local region. To address this issue, in
this paper, a two-stage method for haze removal with a single image by combining dark channel
prior with local histogram equalization is proposed. Firstly, a hazed image is dehazed based on
dark channel prior. Then, to overcome misestimate for regions similar to the atmospheric light,
the image is transformed from RGB to YCbCr color space, and then local histogram equalization is
done on the luminance component. The proposed method is tested with images under different
haze conditions. Experimental results show that the proposed method can effectively remove
haze from a hazed image. © 2013 ICIC International.
Number of references: 12
Main heading: Face recognition
Controlled terms: Graphic methods
Uncontrolled terms: Dark channel priors - Haze removal - Local histogram equalizations
- Luminance component - Scene object - Single images - Two-stage methods
Ycbcr color spaces
Classification code: 716 Telecommunication; Radar, Radio and Television - 902.1
Engineering Graphics
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
-
2.
Accession number: 20132116346318
Title: Wireless communication with chaos
Authors: Ren, Hai-Peng1, 2 ; Baptista, Murilo S.2 ; Grebogi, Celso2, 3/任海鹏;;
Author affiliation: 1 Department of Information and Control Engineering, Xi'An University of
Technology, Xi'an 710048, China
2 Institute for Complex System and Mathematical Biology, SUPA, University of Aberdeen,
Aberdeen AB24 3UE, United Kingdom
3 Freiburg Institute for Advanced Studies, Freiburg University, 79104 Freiburg, Germany
Corresponding author: Ren, H.-P.
Source title: Physical Review Letters
Abbreviated source title: Phys Rev Lett
Volume: 110
Issue: 18
Issue date: April 29, 2013
Publication year: 2013
Article number: 184101
Language: English
ISSN: 00319007
E-ISSN: 10797114
CODEN: PRLTAO
Document type: Journal article (JA)
Publisher: American Physical Society, One Physics Ellipse, College Park, MD 20740-3844, United
States
Abstract: The modern world fully relies on wireless communication. Because of intrinsic
physical constraints of the wireless physical media (multipath, damping, and filtering), signals
carrying information are strongly modified, preventing information from being transmitted with a
high bit rate. We show that, though a chaotic signal is strongly modified by the wireless physical
media, its Lyapunov exponents remain unaltered, suggesting that the information transmitted is
not modified by the channel. For some particular chaotic signals, we have indeed proved that the
dynamic description of both the transmitted and the received signals is identical and shown that
the capacity of the chaos-based wireless channel is unaffected by the multipath propagation of
the physical media. These physical properties of chaotic signals warrant an effective chaos-based
wireless communication system. © 2013 American Physical Society.
Number of references: 37
Main heading: Information filtering
Controlled terms: Communication systems - Lyapunov methods - Wireless
telecommunication systems
Uncontrolled terms: Chaotic signal - High bit rates - Lyapunov exponent - Physical
constraints - Received signals - Wireless channel - Wireless communication system Wireless communications
Classification code: 716 Telecommunication; Radar, Radio and Television - 903.1
Information Sources and Analysis - 921 Mathematics - 961 Systems Science
DOI: 10.1103/PhysRevLett.110.184101
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number: 20132116349933
Title: Research based on labview on wind turbine monitoring system
Authors: Ma, Chenyuan1 ; Zhao, Daoli1 ; Wan, Tianhu1 ; Wu, Luochang1 ; Li, Yanfeng1/马晨原;
赵道利;万天虎;吴罗长;李衍峰;
Author affiliation: 1 Laboratory of Fluid Mechanics Research, Xi'an University of Technology,
Beilin District, Xi'an 710048, China
Source title: IET Conference Publications
Abbreviated source title: IET Conf Publ
Volume: 2012
Issue: 611 CP
Monograph title: International Conference on Sustainable Power Generation and Supply,
SUPERGEN 2012
Issue date: 2012
Publication year: 2012
Article number: 1787
Language: English
ISBN-13: 9781849196734
Document type: Conference article (CA)
Conference name: International Conference on Sustainable Power Generation and Supply,
SUPERGEN 2012
Conference date: September 8, 2012 - September 9, 2012
Conference location: Hangzhou, China
Conference code: 96929
Publisher: Institution of Engineering and Technology, Six Hills Way, Stevenage, SG1 2AY, United
Kingdom
Abstract: With the increased concern about energy shortage and advances in technology, wind
power comes to become an important issue in various countries. The wind turbine working
condition is relatively complex than general mechanical condition. In variable working condition,
wind turbine and system is easy to be made plastic deformation and generate additional
structure stress by inertia force function. The wind turbine monitoring system is able to give the
equipment running status report for forecasting warning before the damage of wind generator
parts (gear, axle, bearing), to ensure condition monitoring and defects alarming. In this paper, a
wind turbine generator monitoring and analysis system is developed. The system structure,
function and arrangement of measuring points are discussed in detail. The simulation shows that
operational status of the wind turbine generators can be judged the system the, displaying a large
number of real-time data, meanwhile can pre-alarm and other functions with the SQL into the
database.
Number of references: 4
Main heading: Wind turbines
Controlled terms: Condition monitoring - Turbogenerators - Wind power
Uncontrolled terms: Additional structures - Equipment running - LabViEW Measuring points - Monitoring and analysis - Monitoring system - System structures
- Wind generator systems
Classification code: 603 Machine Tools - 615.8 Wind Power (Before 1993, use code 611 ) 705.2 Electric Generators - 706 Electric Transmission and Distribution
DOI: 10.1049/cp.2012.1787
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
20130607 新增 6 条
1.
Accession number: 20132116362799
Title: Effects of wettability and pore size uniformity of the channel on infiltration process of
liquid copper in W skeleton
Authors: Bai, Yanxia1, 2 ; Liang, Shuhua1/白艳霞;梁淑华
Author affiliation: 1 Xi'an University of Technology, Xi'an 710048, China
2 Yulin University, Yulin 719000, China
Corresponding author: Liang, S. (liangsh@xaut.edu.cn)
Source title: Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering
Abbreviated source title: Xiyou Jinshu Cailiao Yu Gongcheng
Volume: 42
Issue: 4
Issue date: April 2013
Publication year: 2013
Pages: 730-735
Language: Chinese
ISSN: 1002185X
CODEN: XJCGEA
Document type: Journal article (JA)
Publisher: Rare Metals Materials and Engineering Press, P.O. Box 51, Xi'an, 721014, China
Abstract: A micro-scale W skeleton porous model was built by random Voronoi segments, and
the infiltration process of CuW alloy was then simulated using a finite volume method based on
the Navier-Stokes momentum equation modified by Young-Laplace. The simulation results show
that improving the wettability of Cu-W can accelerate the velocity in the center of copper flow
and strengthen the adhesion of liquid copper to the wall of W skeleton, resulting in the
mechanical combination at the interface of Cu-W. Moreover, the transition of reaming and
shrinkage due to the ununiform pore size can produce whirlpools of copper liquid in the pores,
resulting in pores in the CuW alloy, and thus the filling rate of copper liquid is decreased.
Copyright © 2013, Northwest Institute for Nonferrous Metal Research. Published by Elsevier BV.
All rights reserved.
Number of references: 19
Main heading: Liquids
Controlled terms: Alloys - Copper - Finite volume method - Infiltration - Laplace
equation - Musculoskeletal system - Navier Stokes equations - Pore size - Tungsten
- Wetting
Uncontrolled terms: Filling rate - Infiltration process - Liquid copper - Micro-scales
- Momentum equation - Navier Stokes - Size uniformity - Young-Laplace
Classification code: 921.6 Numerical Methods - 921.2 Calculus - 544.1 Copper 931.2 Physical Properties of Gases, Liquids and Solids - 543.5 Tungsten and Alloys - 461.3
Biomechanics, Bionics and Biomimetics - 452.1 Sewage - 531.1 Metallurgy
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number: 20132116362849
Title: Interpolation method for lidar data visualization based on cubic spline function
Authors: Chen, Hao1 ; Hua, Dengxin1 ; Zhang, Yikun2 ; Yan, Qing1 ; Li, Shichun1/;华灯鑫;张毅
坤; ;李仕春
Author affiliation: 1 School of Mechanical and Precision Instrument Engineering, Xi'an
University of Technology, Xi'an 710048, China
2 School of Computer Science and Engineering, Xi'an University of Technology, Xi'an 710048,
China
Corresponding author: Chen, H. (haozi2638@163.com)
Source title: Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument
Abbreviated source title: Yi Qi Yi Biao Xue Bao
Volume: 34
Issue: 4
Issue date: April 2013
Publication year: 2013
Pages: 831-837
Language: Chinese
ISSN: 02543087
CODEN: YYXUDY
Document type: Journal article (JA)
Publisher: Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China
Abstract: Traditional visualization software and method can not accurately describe the details
of atmospheric parameters under the influence of atmospheric turbulence and boundary layer,
and it is difficult to show the continuous varying process of atmospheric parameters. This study
puts forward a new interpolation method for lidar data visualization based on cubic spline
function. Firstly, the discrete characteristics of the lidar data are analyzed, and the key factors
that influence lidar data visualization graphics are determined. Secondly, based on the mutual
influence of the observation data in a certain atmosphere range, the interpolated data are
revised according to the observation data around the interpolation points, and the varying
tendency of lidar data is fitted with cubic spline function. The experimental results show that the
proposed method can improve the interpolation accuracy of discrete lidar data and the
smoothness of visualization graphics, which provides a strong means for lidar data analysis.
Number of references: 16
Main heading: Data visualization
Controlled terms: Atmospheric turbulence - Interpolation - Optical radar Visualization
Uncontrolled terms: Atmospheric parameters - Cubic spline functions - Data
interpolation - Data revision - Interpolation method - Interpolation points - LIDAR
data - Visualization software
Classification code: 443.1 Atmospheric Properties - 716.2 Radar Systems and Equipment 902.1 Engineering Graphics - 921.4 Combinatorial Mathematics, Includes Graph Theory, Set
Theory - 921.6 Numerical Methods
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number: 20132216374185
Title: Multi-feature structure fusion of contours for unsupervised shape classification
Authors: Lin, Guangfeng1 ; Zhu, Hong2 ; Kang, Xiaobing1 ; Fan, Caixia1 ; Zhang, Erhu1/蔺广逢;
朱虹;;范彩霞;张二虎
Author affiliation: 1 Department of Information Science, Xi'An University of Technology, 5
South Jinhua Road, Xi'an, Xi'an Shaanxi Province 710048, China
2 Faculty of Automation and Information Engineering, Xi'An University of Technology, 5 South
Jinhua Road, Xi'an, Xi'an Shaanxi Province 710048, China
Corresponding author: Lin, G. (lgf78103@126.com)
Source title: Pattern Recognition Letters
Abbreviated source title: Pattern Recogn. Lett.
Volume: 34
Issue: 11
Issue date: 2013
Publication year: 2013
Pages: 1286-1290
Language: English
ISSN: 01678655
Document type: Journal article (JA)
Publisher: Elsevier, P.O. Box 211, Amsterdam, 1000 AE, Netherlands
Abstract: Nonlinear distortion, especially structure distortion, is one of the main reasons for the
poor performance of shape contour classification. The structure fusion of multiple features
provides a new solution for the structure distortion. How is this structure fusion performed? To
answer the question, in this letter, the multi-feature of a contour is defined. Second, the structure
of each feature is measured by similarity. Then, the fusion structure is obtained using the
algebraic operation of the respective structure, the specific form of which is deduced based on
locality-preserving projection (LPP). Finally, the combined feature is mapped into the new
structure-fusion feature in terms of the fusion structure. The experiment demonstrates that this
structure fusion method is superior to other state-of-the-art methods that address geometrical
transformations and nonlinear distortion for classification in Kimia or MPEG-7 datasets. © 2013
Published by Elsevier B.V. All rights reserved.
Number of references: 19
Main heading: Classification (of information)
Controlled terms: Distortion (waves) - Motion Picture Experts Group standards Nonlinear distortion
Uncontrolled terms: Algebraic operations - Geometrical transformation - Multi features
- Shape classification - Shape contours - State-of-the-art methods - Structure
distortions - Unsupervised shape
Classification code: 716.1 Information Theory and Signal Processing - 723.2 Data Processing
and Image Processing
DOI: 10.1016/j.patrec.2013.04.011
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number: 20132216378692
Title: Recognition of cyclostationary signals smoothed
Authors: Liu, Gaohui1 ; Zhang, Zhiping1 ; Yang, Yuan1/刘高辉;张志平;杨媛
Author affiliation: 1 School of Automation and Information, Xi'an University of Technology,
Xi'an, China
Source title: Proceedings of the 2012 National Conference on Information Technology and
Computer Science, CITCS 2012
Abbreviated source title: Proc. Natl. Conf. Inf. Technol. Comput. Sci., CITCS
Monograph title: Proceedings of the 2012 National Conference on Information Technology and
Computer Science, CITCS 2012
Issue date: 2012
Publication year: 2012
Pages: 165-169
Language: English
ISBN-13: 9789491216381
Document type: Conference article (CA)
Conference name: 2012 National Conference on Information Technology and Computer Science,
CITCS 2012
Conference date: November 16, 2012 - November 18, 2012
Conference location: Lanzhou, China
Conference code: 97073
Sponsor: Henan University; Yanshan University; Wenzhou University; Jiangsu University of
Science and Technology; Xi'an University of Science and Technology
Publisher: Atlantis Press, 29 avenue Laumiere, Paris, 75019, France
Abstract: In the identification process of modulated signal based cyclic spectrum, it is chief to
be synchronized for the received signal. The article focuses on the reception signal which is not
synchronized. When uniform distribution variable delay exists, it will not have cyclostationary,
namely it is converted into a stable signal, which limits the usable range of cyclic spectrum
identifying signals. Meanwhile, in this situation, through extracting characteristic parameters,
simulation shows that the method is perfect for modulation identification under the condition
that SNR is 0-50dB. © 2012. The authors - Published by Atlantis Press.
Number of references: 8
Main heading: Information technology
Controlled terms: Computer science - Timing jitter
Uncontrolled terms: Characteristic parameter - Cyclo-stationary signals Cyclostationarity - Identification process - Modulated signal - Modulation
identification - Reception signals - Uniform distribution
Classification code: 903 Information Science - 723 Computer Software, Data Handling and
Applications - 722 Computer Systems and Equipment - 721 Computer Circuits and Logic
Elements - 718 Telephone Systems and Related Technologies; Line Communications - 717
Optical Communication - 716 Telecommunication; Radar, Radio and Television
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number: 20132116362582
Title: Central composite design test based process parameters optimizing for compound
machining with ultrasonic vibration on SiC wafer
Authors: Liu, Yong1 ; Li, Shujuan1 ; Li, Yan1 ; Kong, Lingfei1 ; Wan, Bo1/刘勇;李淑娟;李言;孔令
飞;万博
Author affiliation: 1 School of Mechanical and Precision Instrument Engineering, Xi'an
University of Technology, Xi'an 710048, China
Corresponding author: Liu, Y. (liuyong@xaut.edu.cn)
Source title: Jixie Gongcheng Xuebao/Journal of Mechanical Engineering
Abbreviated source title: Jixie Gongcheng Xuebao
Volume: 49
Issue: 7
Issue date: April 5, 2013
Publication year: 2013
Pages: 193-198
Language: Chinese
ISSN: 05776686
CODEN: CHHKA2
Document type: Journal article (JA)
Publisher: Editorial Office of Chinese Journal of Mechanical, 22 Baiwanzhuang Dajie, Beijing,
100037, China
Abstract: Since it is difficult for ultrasonic vibration compound machining to get effective
cutting mechanism mathematical model through dynamic analysis, and experimental study is
shown an effective method to solve this problem, following researches by means of central
composite design(CCD) testing are carried out. 4-factor and 3-level SiC wafer ultrasonic vibration
compound machining test scheme is designed, and then second-order relational model is
established between tangential cutting force, surface roughness, and their main process
parameters (wire saw speed, workpiece feed rate, rotational speed, and ultrasonic amplitude) by
using response surface methodology. According to multiple quadratic fitting of testing data,
quadratic equation of cutting force and surface roughness is obtained. Constrains of actual
machining condition upon the parameters are analyzed further. With the goal of improving
surface quality (minimized surface roughness) of SiC wafer, the parameters optimization model is
established. Particle swarm optimization algorithm and its procedure are designed to solve the
model. Test proves that the algorithm could achieve optimized process parameters which satisfy
multiple constraints rapidly and effectively. © 2013 Journal of Mechanical Engineering.
Number of references: 12
Main heading: Ultrasonic waves
Controlled terms: Algorithms - Design - Mathematical models - Particle swarm
optimization (PSO) - Silicon carbide - Surface properties - Surface roughness Ultrasonic effects
Uncontrolled terms: Central composite designs - Parameters optimization - Particle
swarm optimization algorithm - Process parameters - Response surface methodology SiC wafer - Tangential cutting force - Ultrasonic vibration
Classification code: 408 Structural Design - 723 Computer Software, Data Handling and
Applications - 753.1 Ultrasonic Waves - 804.2 Inorganic Compounds - 921
Mathematics - 931.2 Physical Properties of Gases, Liquids and Solids
DOI: 10.3901/JME.2013.07.193
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number: 20132116362860
Title: Design of a multi-frequency synchronized signal excitation current source
Authors: Yang, Yuxiang1 ; Qiao, Yang1/杨宇祥;
Author affiliation: 1 School of Mechanical and Precision Instrument Engineering, Xi'an
University of Technology, Xi'an 710048, China
Corresponding author: Yang, Y. (yangyuxiang@xaut.edu.cn)
Source title: Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument
Abbreviated source title: Yi Qi Yi Biao Xue Bao
Volume: 34
Issue: 4
Issue date: April 2013
Publication year: 2013
Pages: 908-913
Language: Chinese
ISSN: 02543087
CODEN: YYXUDY
Document type: Journal article (JA)
Publisher: Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China
Abstract: The excitation current source in bioimpedance spectroscopy (BIS) multi-frequency
synchronized fast measurement system must meet the special requirements of wide frequency
spectrum range, homogeneously distributed spectrum energy, synchronous phase and high
output impedance. This paper designs a periodical and two-valued nine-frequency synchronized
signal f(9, t) based on Walsh functions. f(9, t) includes nine primary harmonics at 1st, 2nd, 4th,
8th, 16th, 32nd, 64th, 128th and 256th harmonics, which have synchronous phase,
homogeneously distributed spectrum energy and 65.52% of the total average power of the signal.
The field programmable gate array (FPGA) implementation method of f(9, t) and the driving
circuit design of the voltage-controlled current source (VCCS) are introduced. Load experiments
were performed and the results show that the theoretical simulation voltage waveform and the
real experiment voltage waveform on the VCCS load are highly consistent, and the VCCS has fairly
high output impedance. This paper establishes an ideal multi-frequency synchronized signal
excitation current source and lays a foundation for the multi-frequency synchronous fast
measurement of BIS.
Number of references: 15
Main heading: Electric converters
Controlled terms: Electric impedance - Experiments - Field programmable gate arrays
(FPGA) - Synchronization - Walsh transforms
Uncontrolled terms: Bio-Impedance spectroscopies - Current sources - Driving circuit
designs - Excitation currents - Field-programmable gate array implementations - Multi
frequency - Theoretical simulation - Voltage-controlled
Classification code: 701.1 Electricity: Basic Concepts and Phenomena - 704.2 Electric
Equipment - 721.3 Computer Circuits - 901.3 Engineering Research - 921.3
Mathematical Transformations - 961 Systems Science
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
20130621 新增 11 条
1.
Accession number: 20132216387781
Title: Investigation on the correction of the Mie scattering lidar's overlapping factor and echo
signals over the total detection range
Authors: Di, Hui-Ge1 ; Hua, Deng-Xin1 ; Wang, Yu-Feng1 ; Yan, Qing1/狄慧鸽;华灯鑫;王玉峰;
闫庆
Author affiliation: 1 School of Mechanical and Precision Instrument Engineering, Xi'an
University of Technology, Xi'an 710048, China
Corresponding author: Di, H.-G. (dihuige@163.com)
Source title: Wuli Xuebao/Acta Physica Sinica
Abbreviated source title: Wuli Xuebao
Volume: 62
Issue: 9
Issue date: May 5, 2013
Publication year: 2013
Article number: 094215
Language: Chinese
ISSN: 10003290
CODEN: WLHPAR
Document type: Journal article (JA)
Publisher: Institute of Physics, Chinese Academy of Sciences, P.O. Box 603, Beijing, 100190,
China
Abstract: There has been great difference between the theoretical signals of the lidar's echo
and its actual signals, due to the angles between the laser beam and its receiving optical axis, and
the laser intensity distribution being asymmetrical. So the correction of the echo signal is
necessary. According to the mathematical derivation and the software simulation, the
mathematical expression of the lidar's overlap factor is given, and the overlap factor curves with
detection range are drawn which express the characters over the total detection range, then the
best angle between lidar's emitting axis and the receiving axis is obtained. The overlap factors are
analyzed when the laser is Gaussian with a uniform intensity distribution. The lidar distance
correction signal and Klett formula are corrected by the overlap factor, and the instrument
parameters of the lidor are measured. In the range where the overlap factor is not zero, its
correction echo signals and extinction coefficients can be obtained by using the corrected Klett
formula. While in the range of the lidar's blind zone, the signals can be derived by a slope method.
Finally, the total correction curve of the extinction coefficients is gained, and it is in accordance
with the actual one correction cuive. © 2013 Chinese Physical Society.
Number of references: 9
Main heading: Signal detection
Controlled terms: Computer software - Electric power factor correction - Optical radar
Uncontrolled terms: Distance corrections - Extinction coefficients - Laser intensity
distribution - Mathematical derivation - Mathematical expressions - Mie-scattering
lidar - Overlap factor - Software simulation
Classification code: 706 Electric Transmission and Distribution - 716.1 Information Theory
and Signal Processing - 716.2 Radar Systems and Equipment - 723 Computer Software,
Data Handling and Applications
DOI: 10.7498/aps.62.094215
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number: 20132316401628
Title: Preparation and characterization of an asphalt-modifying agent with waste packaging
polyethylene and organic montmorillonite
Authors: Fang, Changqing1 ; Yu, Ruien1, 2 ; Li, Yan2 ; Zhang, Mengya1 ; Hu, Jingbo1, 2 ; Zhang,
Min1/方长青;于瑞恩;李言;张梦雅;胡京博;张敏
Author affiliation: 1 College of Printing and Packing Engineering, Xi'an University of
Technology, Xi'an 710048, Shaanxi, China
2 School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology,
Xi'an 710048, Shaanxi, China
Corresponding author: Fang, C. (fcqxaut@163.com)
Source title: Polymer Testing
Abbreviated source title: Polym Test
Volume: 32
Issue: 5
Issue date: 2013
Publication year: 2013
Pages: 953-960
Language: English
ISSN: 01429418
CODEN: POTEDZ
Document type: Journal article (JA)
Publisher: Elsevier Ltd, Langford Lane, Kidlington, Oxford, OX5 1GB, United Kingdom
Abstract: In this paper, waste packaging polyethylene (WPE)/organic montmorillonite (OMMT)
nanocomposites were prepared and used as an asphalt-modifying agent. The structure and
morphology of the nanocomposites and the effects of OMMT on the thermal properties of WPE
were investigated. The influence of the microcosmic effects and physical properties of the
composite agents on the base asphalt were also studied. The results show that the WPE/OMMT
asphalt-modifying agents are exfoliated nanocomposites. When compared with WPE, the melting
range of the composites decreases and the thermal stability is improved. In addition, the
composite agents not only promote good dispersion of WPE in asphalt, but also improve the low
temperature properties of WPE-modified asphalt without adversely affecting its excellent high
temperature properties. Therefore, from an environmental and economic standpoint, it is a novel
and significant attempt at dealing with waste plastics packaging. © 2013 Elsevier Ltd. All rights
reserved.
Number of references: 23
Main heading: Asphalt
Controlled terms: Clay minerals - Coextrusion - Nanocomposites - Packaging Polyethylenes
Uncontrolled terms: Economic standpoints - Exfoliated nanocomposites - Melting range
- Modification - Organic montmorillonite - Packaging - polyethylenes - Structure and
morphology - Waste plastic
Classification code: 933 Solid State Physics - 816.1 Processing of Plastics and Other
Polymers - 815.1.1 Organic Polymers - 761 Nanotechnology - 694.1 Packaging,
General - 482.2 Minerals - 411.1 Asphalt
DOI: 10.1016/j.polymertesting.2013.04.006
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number: 20132316394582
Title: Synthesis and field-emission properties of oriented GaN nanowires
Authors: Li, Enling1 ; Cheng, Xuhui1 ; Zhao, Danna1 ; Xu, Rui1 ; Xi, Meng1 ; Cui, Zhen1 ; Zhao,
Tao1/李恩玲;;赵丹娜;;;崔真;赵涛
Author affiliation: 1 Xi'An University of Technology, Science School, 710048, Xi'an, China
Corresponding author: Li, E. (Lienling@xaut.edu.cn)
Source title: Micro and Nano Letters
Abbreviated source title: Micro. Nano. Lett.
Volume: 7
Issue: 12
Issue date: December 2012
Publication year: 2012
Pages: 1305-1307
Language: English
E-ISSN: 17500443
Document type: Journal article (JA)
Publisher: Institution of Engineering and Technology, Six Hills Way, Stevenage, SG1 2AY, United
Kingdom
Abstract: Oriented gallium nitride (GaN) nanowires grown on Pt-coated Si (1 1 1) substrates,
were synthesised using the chemical vapour deposition method under different Ga sources. The
characteristics of the grown GaN nanowires were investigated using scanning electron
microscopy and X-ray diffraction, which found that the as-synthesised GaN nanowires of the
three samples are of different orientation, and all displayed hexagonal wurtzite structures of GaN
crystals. The electron field-emission properties of the three samples of GaN nanowires showed a
low turn-on field of 4.5, 5.5 and 6.2 V/m, respectively, and field enhancement factors of 1337,
2948 and 2599, respectively. © 2012 The Institution of Engineering and Technology.
Number of references: 18
Main heading: Gallium nitride
Controlled terms: Chemical vapor deposition - Gallium alloys - Nanowires - Scanning
electron microscopy - Single crystals - X ray diffraction - Zinc sulfide
Uncontrolled terms: Chemical vapour deposition - Electron field emission - Field
enhancement factor - Field-emission properties - Gallium nitride nanowires - GaN
nanowires - Hexagonal wurtzite structure - Turn-on field
Classification code: 549.3 Nonferrous Metals and Alloys excluding Alkali and Alkaline Earth
Metals - 741.1 Light/Optics - 761 Nanotechnology - 802.2 Chemical Reactions 804.2 Inorganic Compounds - 933 Solid State Physics
DOI: 10.1049/mnl.2012.0829
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number:
20132316393855
Title:
Two-diode model analysis and experimental verification for photovoltaic cells
Authors: Shang, Ersong1 ; An, Tao1/;安涛
Author affiliation: 1 Xi'an University of Technology, Xi'an, Shaanxi, 710048, China
Source title: Advanced Materials Research
Abbreviated source title: Adv. Mater. Res.
Volume: 684
Monograph title: Advances in Applied Materials and Electronics Engineering II
Issue date: 2013
Publication year: 2013
Pages: 269-273
Language: English
ISSN: 10226680
ISBN-13: 9783037856680
Document type: Conference article (CA)
Conference name: 2nd International Conference on Applied Materials and Electronics
Engineering, AMEE 2013
Conference date: April 19, 2013 - April 20, 2013
Conference location: Hong Kong, China
Conference code: 97095
Sponsor: International Science and Engineering Research Center; International Association for
Scientific and High Technology
Publisher: Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635, Switzerland
Abstract: This paper analyzed a kind of two-diode model and reasonably simplified the
mathematical calculation process under different irradiance, proposing a method which can use
maximum power point to calculate simultaneously series and parallel resistance. Two kinds of PV
modules should be tested in order to validating the accuracy of the proposed method. It is
calculated that the relative error of single diode model is 1.72% and the two-diode model is
0.45%. The result shows that more accuracy can be performed for two-diode model in reflecting
the output characteristics of photovoltaic cells. © (2013) Trans Tech Publications, Switzerland.
Number of references: 5
Main heading: Diodes
Controlled terms: Electronics engineering - Mathematical models Photoelectrochemical cells - Photovoltaic cells
Uncontrolled terms: Experimental verification - Mathematical calculations - Maximum
power point - Output characteristics - Parallel resistance - Reasonable simplified Single-diode models - Two-diode model
Classification code: 741.3 Optical Devices and Systems - 718 Telephone Systems and Related
Technologies; Line Communications - 717 Optical Communication - 921 Mathematics 716 Telecommunication; Radar, Radio and Television - 714 Electronic Components and Tubes
- 713 Electronic Circuits - 715 Electronic Equipment, General Purpose and Industrial
DOI: 10.4028/www.scientific.net/AMR.684.269
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number: 20132316388924
Title: Effects of perennial vegetation on runoff and erosion for field plots on loess plateau in
china
Authors: Tiegang, Zhang1 ; Li, Peng1 ; Li, Zhanbin2 ; Guo, Xiaoding3/;李鹏;李占斌;;
Author affiliation: 1 Key Lab of Northwest Water Resources, Environment Ecology of MOE,
Xi'an University of Technology, Xi'an, Shaanxi, 710048, China
2 Institute of Soil and Water Conservation, Chinese Academy of Sciences and Ministry of
Education, Yangling, Shaanxi, 712100, China
3 Department of Military Economy, Engineering University of CAPF, Xi'an Shaanxi, 710086,
China
Source title: Nature Environment and Pollution Technology
Abbreviated source title: Nat. Environ. Pollut. Technol.
Volume: 12
Issue: 1
Issue date: March 2013
Publication year: 2013
Pages: 63-68
Language: English
ISSN: 09726268
Document type: Journal article (JA)
Publisher: Technoscience Publications, 2, Shila Apartment, Shila Nagar, Near T.V.Tower, Karad415110, Maharastra, India
Abstract: Vegetation is one of effective methods for soil and water conservation. How to select
suitable vegetation species is a key problem in the practice. In this study. through 7 years
observations on the rainfall, vegetation cover, total runoff and sediment in the plots, results
indicated that the benefit of the vegetative cover on runoff and sediment dominated on all plots.
The accumulative sediment yield from bare plot was 7 times to that from Astragalus absurgens ±
Caragana korshindkii plots, also over 4 times to that from the Medicago sativa, Medicago sativa ±
Caragana korshindkii and Astragalus absurgens plots. Among all the vegetation types, Caragana
korshindkii was the most efficient in reducing the runoff, and the combination of shrub and grass
also had better effect in reducing the runoff. The accumulative runoff from bare plot was 2.57
times to that from the C. korshindkii, and over 2 times to that from M. sativa, M. sativa ± C.
korshindkii, A. absurgens ± C. korshindkii and Vicia amucena ± C. korshindkii. This study is of great
importance for the selection of suitable species for vegetation reconstruction in arid and
semi-Arid areas.
Number of references: 26
Main heading: Vegetation
Controlled terms: Arid regions - Erosion - Landforms - Runoff - Sedimentology
- Sediments - Water conservation
Uncontrolled terms: Arid and semi-arid areas - Loess Plateau - Runoff and sediments Shrubs and grasses - Soil and water conservation - Vegetation cover - Vegetation
coverage - Vegetation species
Classification code: 443 Meteorology - 444 Water Resources - 444.1 Surface Water -
481.1 Geology - 483 Soil Mechanics and Foundations
Methods; Vegetation and Pest Control
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
-
821 Agricultural Equipment and
6.
Accession number: 20132316388949
Title: Experimental study on water use efficiency of winter wheat in different irrigation
methods
Authors: Wang, Shun Sheng1 ; Fei, Liang Jun2 ; Gao, Chuan Chang1/王顺生;费良军;;
Author affiliation: 1 North China University of Water Conservancy and Hydroelectric Power,
Zhengzhou, 450011, China
2 Institute of Water Resources, Xi'an University of Technology, Xi'an, 710048, China
Source title: Nature Environment and Pollution Technology
Abbreviated source title: Nat. Environ. Pollut. Technol.
Volume: 12
Issue: 1
Issue date: March 2013
Publication year: 2013
Pages: 183-186
Language: English
ISSN: 09726268
Document type: Journal article (JA)
Publisher: Technoscience Publications, 2, Shila Apartment, Shila Nagar, Near T.V.Tower, Karad415110, Maharastra, India
Abstract: In order to probe dry matter accumulation, grain yield and water use efficiency of
winter wheat, the study has been conducted under three irrigation treatments by the different
irrigation methods. The results show that winter wheat water consumption and the ground dry
matter accumulation gradually increase under the different irrigation conditions, with the
increase in the number of irrigations, while yield and water use efficiency increase at first and
then decrease. Under the same irrigation times, the water consumption of winter wheat in
bed-planting is lower than that in flat planting, and dry matter accumulation is higher than that
of flat planting. Compared with the flat planting, the water quantity of bed-planting can be saved
40%, the production can increase by 5.5% to 11.3%, and water use efficiency can increase by 0.17
to 0.40kg/m3. On the basis of the experimental results, it is suggested that the bed-planting
mode in combination with considerably deficit irrigation at winter, jointing and booting stages is
worth extending the application in winter wheat production.
Number of references: 6
Main heading: Water supply
Controlled terms: Crops - Efficiency - Irrigation - Water management
Uncontrolled terms: Bed-planting - Dry matter accumulation - Experimental studies Grain yield - Irrigation methods - Irrigation treatments - Water use efficiency Winter wheat
Classification code: 444 Water Resources - 446 Waterworks - 446.1 Water Supply
Systems - 821.3 Agricultural Methods - 821.4 Agricultural Products Engineering
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
913.1 Production
7.
Accession number: 20132216387826
Title: Effect of coating alloying element on microstructure and properties of the welded joint of
basic electrode
Authors: Zhang, Min1 ; Wu, Weigang1 ; Li, Jihong1 ; Zhi, Jinhua1, 2 ; Zhang, Haicun2/张敏;吴伟
刚;李继红;支金花;张海存
Author affiliation: 1 College of Material Science and Engineering, Xi'an University of
Technology, Xi'an, 710048, China
2 Xi'an Shangu Power Co., Ltd., Xi'an, 710075, China
Corresponding author: Zhang, M. (zhmmn@xaut.edu.cn)
Source title: Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research
Abbreviated source title: Cailiao Yanjiu Xuebao
Volume: 27
Issue: 2
Issue date: April 2013
Publication year: 2013
Pages: 113-118
Language: Chinese
ISSN: 10053093
CODEN: CYXUEV
Document type: Journal article (JA)
Publisher: Chinese Journal of Materials Research, 72 Wenhua Road, Shenyang, 110015, China
Abstract: Four basic electrodes were designed by the method of transition alloying elements
through coating. The influence of coating alloying elements on microstructure and properties of
basic electrode welded joints were studied by using welding test, metallurgical analysis,
mechanical property testing and fracture scanning tests. The results showed that with the
increase of alloying elements, the changes of four kinds of weld microstructure is small and
mainly composed of tempered sorbite and lath martensite, and accompanied by a small amount
of residual austenite and quadratic precipitated phase, but the microstructure gradually changed
from lath to thin strips, and staggered density increases. What's more, the strength of four
welded joints has a little changed, but the impact of toughness has a greatly improved and the
fracture dimples became many and deep. Last, the effect of coating alloying elements on welds
microstructure and properties is a complementary and mutual restraint process, and the content
of alloying element in No.3 electrode makes the basic electrode weld strength and toughness to
achieve a better matched.
Number of references: 18
Main heading: Alloying elements
Controlled terms: Alloying - Coatings - Fracture - Fracture testing - Fracture
toughness - Martensite - Mechanical properties - Microstructure - Welding -
Welding electrodes
- Welds
Uncontrolled terms: Lath-martensite - Mechanical property testing - Metallic material
- Metallurgical analysis - Microstructure and properties - Residual austenite Tempered-sorbite - Weld microstructures
Classification code: 933 Solid State Physics - 539 Metals Corrosion and Protection; Metal
Plating - 538.2.2 Welding Equipment - 951 Materials Science - 538.2 Welding 531.1 Metallurgy - 421 Strength of Building Materials; Mechanical Properties - 531.2
Metallography
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number: 20132316396538
Title: Nonlinear dynamic behaviors of rotor system supported by self-acting gas-lubricated
bearings with axial grooves
Authors: Zhang, Yongfang1 ; Zhou, Shisheng1 ; Lü, Yanjun2 ; Wu, Ying3 ; Yu, Lie4/张永芳;周世
生;吕延军;吴莹;虞烈
Author affiliation: 1 School of Printing and Packaging Engineering, Xi'an University of
Technology, Xi'an, 710048, China
2 School of Mechanical and Instrumental Engineering, Xi'an University of Technology, Xi'an,
710048, China
3 School of Aerospace, Xi'an Jiaotong University, Xi'an, 710049, China
4 Institute of Mechatronics and Information Systems, Xi'an Jiaotong University, Xi'an, 710049,
China
Corresponding author: Zhang, Y. (zyf_nwpu@126.com)
Source title: Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis
Abbreviated source title: Zhendong Ceshi Yu Zhenduan
Volume: 33
Issue: 2
Issue date: April 2013
Publication year: 2013
Pages: 219-223
Language: Chinese
ISSN: 10046801
CODEN: ZCZHFY
Document type: Journal article (JA)
Publisher: Nanjing University of Aeronautics an Astronautics, 29 Yudao Street, Nanjing, 210016,
China
Abstract: Based on the nonlinear theory, the unbalanced response behavior of the rotor
dynamic system supported by gas journal bearings is investigated. A time-dependent
mathematical model is established to describe the pressure distribution of gas journal bearing
with nonlinearity. The rigid Jeffcott rotor with self-acting gas journal bearing supports is modeled.
The differential transformation method is employed to solve the time-dependent Reynolds
equation of gas bearings. The unbalanced responses of the rotor system supported by finite
width gas journal bearings with three axial grooves are analyzed by bifurcation diagram, orbit
diagram, Poincare´ map diagram and frequency diagram. The numerical results reveal periodic,
period-doubling, period-4, period-8 and chaotic motion of nonlinear behaviors of the system.
Number of references: 10
Main heading: Gas lubricated bearings
Controlled terms: Gas bearings - Gases - Journal bearings - Mathematical models Rigid rotors - Rotors
Uncontrolled terms: Bifurcation diagram - Differential transformation methods - Gas
journal bearings - Nonlinear - Nonlinear dynamic behaviors - Rotor dynamic systems
- Self-acting gas journal bearings - Time-dependent reynolds equation
Classification code: 601.2 Machine Components - 921 Mathematics - 931.2 Physical
Properties of Gases, Liquids and Solids
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number: 20132216386990
Title: A segmental calibration method for a miniature serial-link coordinate measuring machine
using a compound calibration artefact
Authors: Zhou, Awei1 ; Guo, Junjie1 ; Shao, Wei2 ; Li, Beizhan1/周阿维;郭俊杰;邵伟;;
Author affiliation: 1 State Key Laboratory for Manufacturing Systems Engineering, Xi'An
Jiaotong University, Xi'an 710049, China
2 Department of Precision Instruments, Xi'An University of Technology, Xi'an 710048, China
Source title: Measurement Science and Technology
Abbreviated source title: Meas. Sci. Technol.
Volume: 24
Issue: 6
Issue date: June 2013
Publication year: 2013
Article number: 065001
Language: English
ISSN: 09570233
E-ISSN: 13616501
CODEN: MSTCEP
Document type: Journal article (JA)
Publisher: Institute of Physics Publishing, Temple Circus, Temple Way, Bristol, BS1 6BE, United
Kingdom
Abstract: In the application of a miniature serial-link coordinate measuring machine, it is
necessary to calibrate the structural parameters and improve the positioning accuracy for
accurate task performance. In this study, using a designed compound calibration artefact, a new
calibration method which includes kinematic calibration and laser tool centre point (TCP)
calibration is proposed. In the kinematic calibration, geometric parameters included in the
kinematic model can be identified by using the constraint that the cone angle or cylinder
diameter for several different positions is invariable. For the laser TCP calibration, the relative
positions between the laser sensor and the end effector are calibrated by means of the cone
surface part of the calibration artefact, using the constraint that the conic node positions for
several different measurements are invariable. During the calibration process, the identification
of all structural parameters from measuring data can be separated furthest, so the calibration
errors brought by strong correlations between all the parameters can be decreased. Moreover,
the differences of different positions of end effector in calculations can be used; thus, the
calibration error which is due to the positioning error of the end effector can be decreased.
Experimental results on real data have demonstrated the effectiveness of our method. © 2013
IOP Publishing Ltd.
Number of references: 27
Main heading: Calibration
Controlled terms: Cones - Coordinate measuring machines - End effectors Kinematics - Scanning
Uncontrolled terms: Calibration method - Calibration process - Geometric parameter Kinematic Calibration - Positioning accuracy - Relative positions - Strong correlation
- Structural parameter
Classification code: 944 Moisture, Pressure and Temperature, and Radiation Measuring
Instruments - 943.3 Special Purpose Instruments - 943 Mechanical and Miscellaneous
Measuring Instruments - 942 Electric and Electronic Measuring Instruments - 941
Acoustical and Optical Measuring Instruments - 931.1 Mechanics - 741.3 Optical Devices
and Systems - 731.5 Robotics - 631.1 Fluid Flow, General
DOI: 10.1088/0957-0233/24/6/065001
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
10.
Accession number: 20132316396460
Title: An efficient density-based clustering algorithm combined with representative set
Authors: Zhou, Hongfang1 ; Wang, Xiao1 ; Zhao, Xuehan1/周红芳;王晓;;
Author affiliation: 1 School of Computer Science and Engineering, Xi'an University of
Technology, Xi'an 710048, China
Corresponding author: Zhou, H. (zhouhf@xaut.edu.cn)
Source title: Journal of Information and Computational Science
Abbreviated source title: J. Inf. Comput. Sci.
Volume: 10
Issue: 7
Issue date: May 1, 2013
Publication year: 2013
Pages: 2021-2028
Language: English
ISSN: 15487741
Document type: Journal article (JA)
Publisher: Binary Information Press, Flat F 8th Floor, Block 3, Tanner Garden, 18 Tanner Road,
Hong Kong
Abstract: Cluster analysis is a key technique of data mining and has been applied widely. The
paper presents a novel clustering algorithm DCURS, which incorporates the principle of proximity
and limited area into the density-based clustering method to improve clustering accuracy and
stability. In addition, DCURS introduces the representative set to accelerate the running speed of
the algorithm. Experimental results verify that DCURS has better performance than traditional
density-based algorithms of DBSCAN and DBRS. © 2013 by Binary Information Press.
Number of references: 11
Main heading: Clustering algorithms
Controlled terms: Cluster analysis - Data mining
Uncontrolled terms: Better performance - Clustering accuracy - Density-based algorithm
- Density-based Clustering - Density-based clustering algorithms - Limited area Representative set - The principle of proximity
Classification code: 721 Computer Circuits and Logic Elements - 723 Computer Software,
Data Handling and Applications - 922 Statistical Methods
DOI: 10.12733/jics20101716
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
11.
Accession number: 20132316394082
Title: The impact of historical flood research on the improvement of the quality of design flood
Authors: Zhou, Jin1 ; Lv, Yisheng2/周瑾;
Author affiliation: 1 Xi'an University of Technology, China
2 North China University of Water Conservancy and Hydroelectric Power, China
Source title: WIT Transactions on the Built Environment
Abbreviated source title: WIT Trans. Built Environ.
Volume: 140
Monograph title: Advances in Civil, Transportation and Environmental Engineering
Issue date: 2013
Publication year: 2013
Pages: 483-487
Language: English
ISSN: 17433509
ISBN-13: 9781845647865
Document type: Conference article (CA)
Conference name: 2012 International Conference on Civil, Transportation and Environmental
Engineering, CTEE 2012
Conference date: November 17, 2012 - November 18, 2012
Conference location: Jiangsu, China
Conference code: 97105
Sponsor: WIT Transactions on the Built Environment
Publisher: WITPress, Ashurst Lodge, Ashurst, Southampton, SO40 7AA, United Kingdom
Abstract: The representativeness of series data is a very important factor influencing design
flood quality. The research of historical flood and historical documents as well as the extension of
a flood series are important means of improving the representativeness of series data. We
analyzed how to deal with the historical flood in domestic hydropower engineering and
expounded the computing method of design flood in riverway treatment of the Yellow River in
Ningxia. Through the comparison of the two kinds of design flood; one that has a long series with
historical flood while the other only has a short series, we come to the conclusion that historical
floods play an important role in improving the flood representativeness and thus the accuracy of
the design flood results is improved. © 2013 WIT Press.
Number of references: 5
Main heading: Floods
Controlled terms: Design - Environmental engineering
Uncontrolled terms: Computing methods - Design flood - Historical documents Historical floods - Hydropower engineering - Quality of design - The
representativeness of series data - Yellow river
Classification code: 408 Structural Design - 454 Environmental Engineering - 914.1
Accidents and Accident Prevention
DOI: 10.2495/CTEE120691
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
20130619 补
1.
Accession number: 20131716235598
Title: Analytical modeling of periodically inspected software rejuvenation policy
Authors: Meng, Haining1; Hei, Xinhong1; Liu, Jianjun2
Author affiliation: 1 School of Computer Science and Engineering, Xi'An Technology University,
Xi'an 710048, China
2 Aeronautics Computing Technique Research Institute, Xi'an 710068, China
Corresponding author: Meng, H.
Source title: Information Technology Journal
Abbreviated source title: Inf. Technol. J.
Volume: 12
Issue: 6
Issue date: 2013
Publication year: 2013
Pages: 1227-1232
Language: English
ISSN: 18125638
E-ISSN: 18125646
Document type: Journal article (JA)
Publisher: Asian Network for Scientific Information, 308-Lasani Town, Sargodha Road,
Faisalabad, Pakistan
Abstract: As a proactive and preventive software fault tolerant technique, software
rejuvenation is a main method for counteracting software aging. In this study, a software
rejuvenation model based on periodical inspection policy is set up. Firstly, by analyzing runtime
state and failure feature of software system, the functions of system unavailability and cost rate
are given and optimal system inspection interval and software rejuvenation interval are selected
via minimizing system unavailability and cost rate. Then boundary conditions of cost rate and
optimal inspection interval are deduced. Finally, quantitative analysis and numeric experiment
result show that selecting optimal inspection interval and software rejuvenation interval can
greatly reduce system cost and improve system availability and reliability. In addition, the
numeric experiment result further validate that the software rejuvenation model with periodical
inspection policy has higher system availability than the general software rejuvenation model in
the case of the failure rate following Weibull and exponential distribution. © 2013 Asian Network
for Scientific Information.
Number of references: 11
Main heading: Software reliability
Controlled terms: Costs - Endocrinology - Experiments - Inspection Optimization - Weibull distribution
Uncontrolled terms: Cost rates - Periodical inspection - Software aging - Software
rejuvenation - Unavailability
Classification code: 922.2 Mathematical Statistics - 921.5 Optimization Techniques - 913.3.1
Inspection - 913.3 Quality Assurance and Control - 911 Cost and Value Engineering; Industrial
Economics - 901.3 Engineering Research - 461.6 Medicine and Pharmacology
DOI: 10.3923/itj.2013.1227.1232
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
20130621 新增 8 条
1.
Accession number: 20132416418274
Title: Properties of poly(lactic acid)/organo-montmorillonite nanocomposites prepared by
solution intercalation
Authors: Li, Yang1 ; Ren, Peng-Gang1 ; Zhang, Qian1 ; Shen, Ting-Ting1 ; Ci, Ji-Hao1 ; Fang,
Chang-Qing1/;任鹏刚;;;方长青
Author affiliation: 1 Institute of Printing and Packaging Engineering, Xian University of
Technology, Xian, Shaanxi 710048, China
Corresponding author: Ren, P.-G. (rengpg@126.com)
Source title: Journal of Macromolecular Science, Part B: Physics
Abbreviated source title: J Macromol Sci Part B Phys
Volume: 52
Issue: 8
Issue date: January 1, 2013
Publication year: 2013
Pages: 1041-1055
Language: English
ISSN: 00222348
E-ISSN: 1525609X
CODEN: JMAPBR
Document type: Journal article (JA)
Publisher: Taylor and Francis Inc., 325 Chestnut St, Suite 800, Philadelphia, PA 19106, United
States
Abstract: Poly(lactic acid)/organo-montmorillonite (PLA/OMMT) nanocomposite films were
prepared through solution intercalation using dichloromethane as solvent. X-ray diffraction
indicated that organo-montmorillonite (OMMT) was well intercalated and the interlayer spacing
d increased by 0.94-1.47 nm. Transmission Electron Microscopy showed that a majority of OMMT
was fully exfoliated and uniformly dispersed in the PLA matrix at low filler loading, whereas more
intercalated tactoids and aggregates of OMMT existed at high loading. The crystallinity of PLA
was hardly changed with the addition of OMMT. Additionally, CO2 permeability and water vapor
transmission rate of the composite films were reduced with increasing content of OMMT. At 5
wt% OMMT loading, CO2 permeability and water vapor transmission rate were reduced by 75.8%
and 23.9%, respectively. The tensile strength (TS) and Young's modulus of the PLA/OMMT
nanocomposites were first enhanced, and then decreased with increasing content of OMMT.
Compared with pure PLA, a 83.8% increase in the Young's modulus and a 76.0% improvement in
TS were obtained with the addition of 3 wt% OMMT. © 2013 Taylor & Francis Group, LLC.
Number of references: 32
Main heading: Loading
Controlled terms: Clay minerals - Composite films - Dichloromethane - Elastic
moduli - Lactic acid - Mechanical permeability - Mechanical properties Nanocomposites - Tensile strength - Transmission electron microscopy
- Vapors X ray diffraction
Uncontrolled terms: Crystallinities - Filler loading - Interlayer spacings - OMMT Organo-montmorillonite - Poly lactic acid - Water vapor transmission rate - Young's
Modulus
Classification code: 951 Materials Science - 804 Chemical Products Generally - 804.1
Organic Compounds - 931.2 Physical Properties of Gases, Liquids and Solids - 931.3
Atomic and Molecular Physics - 933 Solid State Physics - 933.1.1 Crystal Lattice - 761
Nanotechnology - 714.2 Semiconductor Devices and Integrated Circuits - 672 Naval
Vessels - 482.2 Minerals - 422 Strength of Building Materials; Test Equipment and
Methods - 421 Strength of Building Materials; Mechanical Properties - 741.3 Optical
Devices and Systems
DOI: 10.1080/00222348.2013.781937
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number: 20132416422480
Title: Model of profit allocation based on fuzzy bicooperative game
Authors: Feng, Qing-Hua1, 2 ; Chen, Ju-Hong1 ; Liu, Tong2/冯庆华;陈菊红;刘通
Author affiliation: 1 School of Economics and Management, Xi'an University of Technology,
Xi'an 710054, China
2 School of Information, Xi'an University of Finance and Economics, Xi'an 710100, China
Corresponding author: Feng, Q.-H. (fqhua96183@126.com)
Source title: Kongzhi yu Juece/Control and Decision
Abbreviated source title: Kongzhi yu Juece Control Decis
Volume: 28
Issue: 5
Issue date: May 2013
Publication year: 2013
Pages: 701-705
Language: Chinese
ISSN: 10010920
CODEN: KYJUEF
Document type: Journal article (JA)
Publisher: Northeast University, P.O. Box 125, Shenyang, 110005, China
Abstract: In the product servitization supply chain, the multiple providers provide products and
services to the system integrators and gain the profits of products and services. Taking the double
profit allocation of the providers as an example, the profit allocation model of the fuzzy
bicooperative game is presented by the service quality of the provider as participation based on
the bicooperative game. The Aubin core and the crisp core of the fuzzy bicooperative game are
defined. It is proved that the Weber set is consistent with the crisp core and the Weber set is the
subset of the Aubin core, and the greater the alliance, the greater the marginal profit with the
service quality of the provider increases in the convex fuzzy bicooperative game, which indicate
that the optimal allocation is existent and the fuzzy bicoalition is stable.
Number of references: 14
Main heading: Profitability
Controlled terms: Quality of service - Supply chains
Uncontrolled terms: Bi-cooperative game - Core - Optimal allocation - Products and
services - Profit allocation - Provider - System integrators - Weber set
Classification code: 913 Production Planning and Control; Manufacturing - 912 Industrial
Engineering and Management - 911.2 Industrial Economics - 723 Computer Software,
Data Handling and Applications - 718 Telephone Systems and Related Technologies; Line
Communications - 717 Optical Communication - 716 Telecommunication; Radar, Radio
and Television
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number: 20132416422377
Title: VLSI design of configured fractional pixel motion estimation with a small cache
Authors: Lu, Wei1 ; Yu, Ningmei1 ; Ren, Ru1 ; Kong, Rui1/;余宁梅;;;
Author affiliation: 1 School of Automation and Information Engineering, Xi'an University of
Technology, Xi'an 710048, China
Corresponding author: Yu, N. (yunm@xaut.edu.cn)
Source title: Journal of Computational Information Systems
Abbreviated source title: J. Comput. Inf. Syst.
Volume: 9
Issue: 9
Issue date: May 1, 2013
Publication year: 2013
Pages: 3529-3536
Language: English
ISSN: 15539105
Document type: Journal article (JA)
Publisher: Binary Information Press, P.O. Box 162, Bethel, CT 06801-0162, United States
Abstract: This paper proposes a circuit structure suitable for H.264 full search variable block
fractional pixel motion estimation. Analyze the principle of fractional pixel motion estimation and
complete the VLSI design. This architecture designs 32×32 size of the searching window, designs a
real-time interpolation method according to the difference between 1/2 and 1/4 pixel
interpolation algorithm, uses the six tap filter design and configurable PE, configures four
processing units for 4×4 to 16×16 seven segmentation models on the fractional pixel motion
estimation calculation. According to the characteristics of large amount of data after
interpolation, in PE unit uses data exchanging and matching, thus saving chip cache space,
improving the data utilization and throughput rate. After logic synthesis using SMIC 0.13 μm
standard cell library, the number of gates is 309 K, chip cache is 3.9 KB. This design can handle
1920×1088 @ 70 fps under the working frequency of 300 MHz. © 2013 by Binary Information
Press.
Number of references: 10
Main heading: Motion estimation
Controlled terms: Design - Electronic data interchange - Interpolation
Uncontrolled terms: Architecture designs - Can be configured - Fractional pixel motion
estimation - Interpolation algorithms - Interpolation method - Segmentation models
- Small cache space - VLSI
Classification code: 408 Structural Design - 716.1 Information Theory and Signal Processing
- 723.2 Data Processing and Image Processing - 921.6 Numerical Methods
DOI: 10.12733/jcis5887
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number: 20132416422173
Title: A photoelectric detection system for all-fiber rotational Raman lidar
Authors: Li, Shi-Chun1 ; Hua, Deng-Xin1 ; Xin, Wen-Hui1 ; Tian, Xiao-Yu1 ; Zhang, Ai1/李仕春;华
灯鑫;辛文辉;田小雨;张爱
Author affiliation: 1 School of Mechanical and Precision Instrument Engineering, Xi'an
University of Technology, Xi'an 710048, China
Corresponding author: Hua, D.-X. (dengxinhua@xaut.edu.cn)
Source title: Guangdianzi Jiguang/Journal of Optoelectronics Laser
Abbreviated source title: Guangdianzi Jiguang
Volume: 24
Issue: 5
Issue date: May 2013
Publication year: 2013
Pages: 855-861
Language: Chinese
ISSN: 10050086
CODEN: GUJIE9
Document type: Journal article (JA)
Publisher: Board of Optronics Lasers, No. 47 Yang-Liu-Qing Ying-Jian Road, Tian-Jin City, 300380,
China
Abstract: A photoelectric detection system based on photon counting technique is designed
using photomultiplier tube (PMT) for solving the detectable problem of the ultra-weak light level
in all-fiber rotational Raman lidar. In order to improve the stability of the single photon pulse and
the reliability of discrimination counting, the single photon pulse waveform is reshaped by
impedance matching technique, and then the optimum selections of operational parameters
such as PMT high-voltage power supply, discrimination threshold level are mainly discussed
through testing pulse height distribution in differential method, so its signal-to-noise ratio is
enhanced. The experimental testing system possessing the relative optical intensity changeability
with certainty is configured, and then the action type of pulse pileup effect and the effective
dead time in this system are experimentally tested based on pulse pileup non-linear analysis
model of Poisson point process, so the reasonable nonlinearity correction may be adopted to
improve its linearity. Experiment results show that this photoelectric detection system can
implement the detection of weak optical signal whose photon counting rate is less than 140 MHz,
and its linearity is better than 1.0%. The optimized and provided experimental schemes are
significant for the photoelectric detection system of this type.
Number of references: 20
Main heading: Photoelectricity
Controlled terms: Atmospheric optics - Optical radar - Particle beams - Photons
Uncontrolled terms: Discrimination thresholds - High voltage power supply - Impedance
matching technique - Nonlinearity correction - Photoelectric detection systems Photon counting - Pulse height distribution - Rotational Raman lidar
Classification code: 716.2 Radar Systems and Equipment - 741.1 Light/Optics - 932.1
High Energy Physics
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number: 20132416414706
Title: Experimental research on size effect of magnetic hysteresis loop for Q235 steel
Authors: Li, Ai Guo1, 2 ; Zhao, Jun Hai1 ; Xiong, Er Gang1/李爱国;赵俊海;
Author affiliation: 1 School of Civil Engineering, Chang'an University, Xi'an 710061, China
2 School of Civil Engineering and Architecture, Xi'an University of Technology, Xi'an 710048,
China
Source title: Advanced Materials Research
Abbreviated source title: Adv. Mater. Res.
Volume: 690 693
Monograph title: Materials Design, Processing and Applications
Issue date: 2013
Publication year: 2013
Pages: 298-302
Language: English
ISSN: 10226680
ISBN-13: 9783037856925
Document type: Conference article (CA)
Conference name: 4th International Conference on Manufacturing Science and Engineering,
ICMSE 2013
Conference date: March 30, 2013 - March 31, 2013
Conference location: Dalian, China
Conference code: 97228
Sponsor: Northeastern University, China; Harbin Institute of Technology; Jilin University
Publisher: Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635, Switzerland
Abstract: The magnetic hysteresis loop is a significant performance of ferromagnetic material.
The different-size specimens were fabricated and studied on the basis of magnetomechanical
coupling tests. The curve of relationship between model size and magnetization intensity is
obtained and hysteretic curve is described in the different conditions. The results indicate that
the influencing law is reflected based on size effect of model specimens and performance of
magnetic hysteresis and magnetization intensity. The results indicate that the size of Q235 steel
model specimens is considerably influential in the magnetic hysteresis loop and magnetization,
which accounts for an evident size effect. © (2013) Trans Tech Publications, Switzerland.
Number of references: 13
Main heading: Magnetic hysteresis
Controlled terms: Hysteresis loops - Magnetic materials - Magnetization - Size
determination
Uncontrolled terms: Experimental research - Hysteretic curve - Magnetic intensities Magnetization intensities - Magnetomechanical couplings - Model size - Q235 steel Size effects
Classification code: 701.2 Magnetism: Basic Concepts and Phenomena - 708.4 Magnetic
Materials - 921 Mathematics - 943.3 Special Purpose Instruments
DOI: 10.4028/www.scientific.net/AMR.690-693.298
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number: 20132416422413
Title: 3D reconstruction of architecture appearance: A survey
Authors: Ning, Xiaojuan1 ; Wang, Yinghui1/宁晓娟;王映辉
Author affiliation: 1 Institute of Computer Science and Engineering, Xi'an University of
Technology, Xi'an 710048, China
Corresponding author: Ning, X. (ningxiaojuan@xaut.edu.cn)
Source title: Journal of Computational Information Systems
Abbreviated source title: J. Comput. Inf. Syst.
Volume: 9
Issue: 10
Issue date: May 15, 2013
Publication year: 2013
Pages: 3837-3848
Language: English
ISSN: 15539105
Document type: Journal article (JA)
Publisher: Binary Information Press, P.O. Box 162, Bethel, CT 06801-0162, United States
Abstract: Architecture is one of the main elements in outdoor scene of real world, and the
reconstructed buildings models have wide applications in virtual reality, computer animation,
urban planning and etc. In this paper, we first summarize and classify the recent methods
according to different acquisition and modeling principle, discuss and compare the rule-based,
image-based and point cloud based reconstruction method respectively from automation degree,
input and output data. The paper evaluates the characteristics of each method including
advantages and disadvantages and point out that point-based building reconstruction method
will be the future research trend. Furthermore, it analyzes the issues such as data loss, mass data
processing, manual interaction and visual comprehension that existed in point cloud based
method, and the corresponding solutions are proposed so as to improve the integrity, real-time
and practicability of the building reconstruction, and also it emphasizes the feasibility by
combining the building rules and high-level semantic to reconstruct the details of building model.
Finally, the challenge and future research direction are underlined based on the analysis of new
progress in this field. © 2013 by Binary Information Press.
Number of references: 57
Main heading: Three dimensional
Controlled terms: Animation - Buildings - Data processing - Maintenance Semantics - Urban planning - Virtual reality
Uncontrolled terms: Appearance information - Building reconstruction - Digital
representations - Point cloud data - Three-dimensional model
Classification code: 402 Buildings and Towers - 403.1 Urban Planning and Development 723 Computer Software, Data Handling and Applications - 903.2 Information Dissemination
- 913.5 Maintenance
DOI: 10.12733/jcis5807
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number: 20132416413068
Title: Multiple-image encryption based on phase mask multiplexing in fractional Fourier
transform domain
Authors: Liansheng, Sui1 ; Meiting, Xin1 ; Ailing, Tian2/隋连升;;;
Author affiliation: 1 School of Computer Science and Engineering, Xi'An University of
Technology, Xi'an 710048, China
2 Shannxi Province Key Lab of Thin Film Technology and Optical Test, Xi'An Technological
University, Xi'an 710032, China
Corresponding author: Liansheng, S. (liudua2010@gmail.com)
Source title: Optics Letters
Abbreviated source title: Opt. Lett.
Volume: 38
Issue: 11
Issue date: June 1, 2013
Publication year: 2013
Pages: 1996-1998
Language: English
ISSN: 01469592
E-ISSN: 15394794
CODEN: OPLEDP
Document type: Journal article (JA)
Publisher: Optical Society of America, 2010 Massachusetts Avenue NW, Washington, DC
20036-1023, United States
Abstract: A multiple-image encryption scheme is proposed based on the phase retrieval
process and phase mask multiplexing in the fractional Fourier transform domain. First, each
original gray-scale image is encoded into a phase only function by using the proposed phase
retrieval process. Second, all the obtained phase functions are modulated into an interim, which
is encrypted into the final ciphertext by using the fractional Fourier transform. From a plaintext
image, a group of phase masks is generated in the encryption process. The corresponding
decrypted image can be recovered from the ciphertext only with the correct phase mask group in
the decryption process. Simulation results show that the proposed phase retrieval process has
high convergence speed, and the encryption algorithm can avoid cross-talk; in addition, its
encrypted capacity is considerably enhanced. © 2013 Optical Society of America.
Number of references: 13
Main heading: Cryptography
Controlled terms: Image processing - Multiplexing - Phase shifters - Security of data
Uncontrolled terms: Convergence speed - Decryption process - Encryption algorithms
- Fractional Fourier transforms - Gray-scale images - Multiple-image encryptions Phase functions - Phase retrieval
Classification code: 703.1 Electric Networks - 716 Telecommunication; Radar, Radio and
Television - 717 Optical Communication - 718 Telephone Systems and Related
Technologies; Line Communications - 723 Computer Software, Data Handling and
Applications - 723.2 Data Processing and Image Processing
DOI: 10.1364/OL.38.001996
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number: 20132416419893
Title: 2-tuple linguistic fuzzy ISM and its application
Authors: Xiong, Guoqiang1 ; Li, Ling1 ; Hao, Jiantao1/熊国强;;郝建涛
Author affiliation: 1 School of Business Administration, Xi'an University of Technology, Xi'an,
710054, China
Corresponding author: Xiong, G. (xgq168@163.com)
Source title: Advances in Intelligent and Soft Computing
Abbreviated source title: Adv. Intell. Soft Comput.
Volume: 78 AISC
Issue: VOL. 1
Monograph title: Fuzzy Information and Engineering 2010
Issue date: 2009
Publication year: 2009
Pages: 353-362
Language: English
ISSN: 18675662
ISBN-13: 9783642148798
Document type: Conference article (CA)
Conference name: 5th Annual Conference on Fuzzy Information and Engineering, ACFIE 2010
Conference date: September 23, 2010 - September 27, 2010
Conference location: Huludao, China
Conference code: 97313
Sponsor: Liaoning Technology University; Fuzzy Inf. Eng. Branch China Oper. Res. Soc.; IIGSS-GB
Publisher: Springer Verlag, Tiergartenstrasse 17, Heidelberg, D-69121, Germany
Abstract: In view of the complexity of actual decision-making problem and the cognitive
fuzziness of decision-makers, we present a modified fuzzy-ISM based on 2-tuple linguistic
representation information processing technology in this paper. Using TAM operator, we process
2-tuple semantic information of decisionmaking. After integration and standardization, we built
the 2-tuple linguistic representation fuzzy interpretive structural model (2TLR-FISM). This model
is more accurate for processing fuzzy semantic information than conventional ISM which may
process semantic information rough and is easy to make distortion and loss of information. Finally,
take a case study of analysing the influential factors of emergency management to illustrate the
feasibility of the method. © Springer-Verlag Berlin Heidelberg 2010.
Number of references: 14
Main heading: Linguistics
Controlled terms: Civil defense - Data processing - Disasters - Model structures Risk management - Semantics
Uncontrolled terms: 2-tuple linguistic representations - 2TLR-FISM - Decision-making
problem - Emergency management - Influential factors - Information processing
technology - Interpretive structural models - Semantic information
Classification code: 404.2 Civil Defense - 408 Structural Design - 484 Seismology 723.2 Data Processing and Image Processing - 903.2 Information Dissemination - 922.1
Probability Theory
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
20130629 新增 9 条
1.
Accession number: 20132516433097
Title: Effect of Na2SiO3 concentration on energy consumption during arcing process of
micro-arc oxidation on aluminum alloys
Authors: Ge, Yan-Feng1 ; Jiang, Bai-Ling1 ; Shi, Hui-Ying1/葛延峰;蒋百灵;时惠英
Author affiliation: 1 School of Materials Science and Engineering, Xi'an University of
Technology, Xi'an 710048, China
Corresponding author: Jiang, B.-L. (jiangbail@vip.163.com)
Source title: Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals
Abbreviated source title: Zhongguo Youse Jinshu Xuebao
Volume: 23
Issue: 4
Issue date: April 2013
Publication year: 2013
Pages: 950-956
Language: Chinese
ISSN: 10040609
CODEN: ZYJXFK
Document type: Journal article (JA)
Publisher: Central South University of Technology, Hunan, Changsha, 410083, China
Abstract: The arcing process of micro-arc oxidation (MAO) on 1015 alloys aluminum (Al) using
pulse power source in aqueous solutions with different Na2SiO3 concentrations was studied. The
morphologies and surface resistance of initial films at arcing moment were analyzed and
observed using scanning electron microscope (SEM) and electrochemical test, respectively. The
effect of Na2SiO3 concentration on energy consumption of arcing process during MAO was
calculated based on change curve of voltage. The results indicate that there is no arcing
phenomenon but electrolytic etching on Al samples when the Na2SiO3 concentration is 0 and
voltage is 1500 V. With Na2SiO3 solution concentration increasing from 0.25 g/L to 10 g/L, arcing
voltage dropping from 1217 V to 351 V, arcing time reducing from 270 s to 40 s, the quantity of
microspores on surface of initial films increases during arcing process of MAO. The high
resistance film with resistance up to 105 order of magnitude formed on the surface of Al samples
is the premise of arcing phenomenon emerging in MAO process, and higher Na2SiO3 solution
concentration is beneficial to forming high resistance film. The energy consumption of arcing
process is diminished with Na2SiO3 solution concentration increasing, and minimum value is 16
kJ/dm2 when Na2SiO3 concentration is 10 g/L.
Number of references: 17
Main heading: Concentration (process)
Controlled terms: Aluminum - Aluminum alloys - Energy utilization - Oxidation Scanning electron microscopy - Silicon compounds - Sodium
Uncontrolled terms: Arcing phenomena - Arcing process - Electrochemical test Electrolytic etching - Microarc oxidation - Pulse power sources - Sodium silicate Solution concentration
Classification code: 802.3 Chemical Operations - 802.2 Chemical Reactions - 741.1
Light/Optics - 804.1 Organic Compounds - 549.1 Alkali Metals - 541.1 Aluminum 525.3 Energy Utilization - 541.2 Aluminum Alloys
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number: 20132516432922
Title: Mechanical properties of iron-based hard coatings prepared by plasma spraying
technology
Authors: Lei, Ali1 ; Feng, Lajun1 ; Shen, Wenning1 ; Wang, Guanchong1/雷阿利;冯拉俊;沈文宁
Author affiliation: 1 School of Materials Science and Engineering, Xi'an University of
Technology, Xi'an 710048, China
Corresponding author: Lei, A. (leiali@126.com)
Source title: Hanjie Xuebao/Transactions of the China Welding Institution
Abbreviated source title: Hanjie Xuebao
Volume: 34
Issue: 4
Issue date: April 2013
Publication year: 2013
Pages: 27-30
Language: Chinese
ISSN: 0253360X
CODEN: HHPAD2
Document type: Journal article (JA)
Publisher: Harbin Research Institute of Welding, No. 111 He-Xing Lu, Harbin, China
Abstract: In order to prepare wear-resistant coating on the surface of carbon steels and make
the expansion coefficient of coating close to that of substrate and reduce stress in coating,
mechanically mixed powders of 80%Fe, 13%P and 7%C were used to prepare iron-based
wear-resistant coating by plasma spraying. The bonding strength was tested using binder dual
tensile test method. The hardness in the coating was analyzed by surface microhardness method.
And the wear resistance test of coating was carried out by MMW-2 (high temperature) friction
and wear testing machine using 40Cr cemented carbide as grinding materials. The results show
that the average bonding strength of the coating was 29 MPa, and the average microhardness
was 805 HV50, higher than that of ceramic coating. The coating had better wear resistance, and
the coating abrasion loss was around 36 mg which was about 1/13 of the grinding material. And
the wear mechanism of the coating was mainly abrasive wear.
Number of references: 15
Main heading: Chromate coatings
Controlled terms: Abrasion - Carbon steel - Ceramic coatings - Diffusion bonding Grinding (machining) - Hard coatings - Microhardness - Plasma spraying - Tensile
testing - Tribology
- Wear resistance
Uncontrolled terms: Bonding strength - Cemented carbides - Expansion coefficients Friction and wear - Plasma spraying technology - Surface microhardness - Thermal
spray - Wear-resistant coating
Classification code: 931 Classical Physics; Quantum Theory; Relativity - 813 Coatings and
Finishes - 812.1 Ceramics - 951 Materials Science - 606.2 Abrasive Devices and
Processes - 422.2 Strength of Building Materials : Test Methods - 421 Strength of Building
Materials; Mechanical Properties - 545.3 Steel
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number: 20132516433155
Title: Proportional resonant control for two stage matrix converter excited doubly-fed wind
power generation system
Authors: Wang, Junrui1, 2 ; Zhong, Yanru1 ; Song, Weizhang1 ; Yang, Bo1/王君瑞;钟彦儒;宋卫
章;杨波
Author affiliation: 1 School of Automation and Information Engineering, Xi'an University of
Technology, Xi'an 710048, China
2 School of Electrical and Information Engineering, The North University for Ethnics, Yinchuan
750021, China
Corresponding author: Wang, J. (jr09110111@163.com)
Source title: Gaodianya Jishu/High Voltage Engineering
Abbreviated source title: Gaodianya Jishu
Volume: 39
Issue: 5
Issue date: May 2013
Publication year: 2013
Pages: 1210-1217
Language: Chinese
ISSN: 10036520
CODEN: GAJIE5
Document type: Journal article (JA)
Publisher: Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China
Abstract: Two-stage matrix converter (TSMC) has a real DC link, while it does not contain large
DC link energy storage capacitors. Thereby, we introduced TSMC as an excitation source of
doubly-fed wind power generation system, and established a control system of doubly-fed wind
power generation based on the stator flux linkage orientation. Moreover, we developed a
proportional resonant (PR) control strategy used in rotor converter according to principle of PR
control. In this method, the active and reactive current components in the vector control strategy
are adjusted after transforming into a stationary coordinate to realize the doubly-fed generator
independent regulation of active and reactive power. Compared with vector control using PI
controller, this strategy does not need repeated coordinate transformation but simplify the
control algorithm; for no coupling term and feed-forward compensation exist, the robustness of
the control system is improved, improving the quality of output current. Simulation and
experimental results show that PR control of TSMC excited doubly-fed wind power generation
system has a good dynamic and static performance.
Number of references: 23
Main heading: Quality control
Controlled terms: Algorithms - Control systems - Electric power generation Resonance
Uncontrolled terms: Connected to the grid - Decoupling controls - Doubly-fed wind
power generations - Proportional-resonant controls - Two stage matrix converter Variable speed constant frequency
Classification code: 615 Thermoelectric, Magnetohydrodynamic and Other Power Generators
- 701 Electricity and Magnetism - 723 Computer Software, Data Handling and Applications
- 731.1 Control Systems - 913.3 Quality Assurance and Control - 921 Mathematics
DOI: 10.3969/j.issn.1003-6520.2013.05.028
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number: 20132516429359
Title: Characteristics of spatial distribution of soil water-air-heat parameters in typical oasis
croplands at middle reaches of Heihe River
Authors: Wang, Weihua1 ; Wang, Quanjiu1, 2 ; Wu, Xiangbo1 ; Wang, Shuo1/王卫华;王全九;武
向博;王铄
Author affiliation: 1 Institute of Water Resources and Hydro-electric Engineering, Xi'an
University of Technology, Xi'an 710048, China
2 State Key Laboratory of Soil Erosion and Dryland Farming on the Loess Plateau, Institute of
Soil and Water Conservation, The Chinese Academy of Sciences, Yangling 712100, China
Corresponding author: Wang, Q. (wquanjiu@163.com)
Source title: Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural
Engineering
Abbreviated source title: Nongye Gongcheng Xuebao
Volume: 29
Issue: 9
Issue date: May 1, 2013
Publication year: 2013
Pages: 94-102
Language: Chinese
ISSN: 10026819
CODEN: NGOXEO
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Engineering, Agricultural Exhibition Road South,
Beijing, 100026, China
Abstract: Using statistical methods for a study on the spatial variations of soil properties has
become one of hot topics in the study of soil science. Due to the deep research on the spatial
variation of soil hydraulic parameters, and the lack of research on the dynamic characteristics of
soil air and heat transfer, we cannot compare the spatial variation characteristics of soil, water, air,
and heat transfer kinetic parameters. As the interaction between the soil and the environment as
well as the precise regulation of farmland soil moisture, air and heat condition problem is
receiving more and more attention, the numerical model used to study the soil moisture, air and
heat transport process, effectiveness and its impact on crop growth and ecological environment
has gradually become a reality. But model accuracy depends largely on the accuracy of soil, water,
air, and heat transfer kinetic parameters. Thus, seeking a simple and feasible method of
determining the thermal dynamic parameters of soil moisture is the focus of research around the
world. In order to define the dynamiccharacteristics of water conductivity, air permeability and
heat conductivity's spatial variability, this paper examines the spatial variation of the above
parameters in Linze County, an agricultural area in the middle reaches of the Heihe River Basin.
PL-300 soil air permeability measurement and soil heat pulse meter were applied to measured
soil air permeability and thermal conductivity. In this paper, we designed an experiment of four
levels of moisture content and took the average of three replications. Hydraulic conductivity is
measured by qdisc infiltration instrument, each measuring point design four suction head, based
on a spatial analysis function of GIS, The results showed as follows: 1) simulate the spatial
structure and variability of the water, air, and heat parameters using land statistics of a wheat
field. The optimal fitting model for saturated hydraulic conductivity, air permeability, thermal
conductivity are an exponential model, the sum of squared residuals are small, nearly zero, and
the determination coefficient R2 reached more than 80%. The results show that the statistical
method can better simulate the spatial structure and variation characteristics of soil moisture air
and thermal parameters. Fractal dimension (D) was close to 2, illustrating that soil water
conductivity, air permeability and heat conductivity have strong spatial variation characteristics in
this region. 2) Saturated hydraulic conductivity, air permeability and heat conductivity's C / (C
+C0)>75%, had a strong degree of spatial autocorrelation in the study scale. Recommend
sampling distances of hydraulic conductivity, air permeability and heat conductivity both are 10m.
And sampling distances of the other soil physical parameters are recommend to be 4m. 3)
Kringing interpolation results show that soil water and gas parameters change was having a
certain degree of consistency, Thermal conductivity has certain regional characteristics in the
study area. The higher the moisture content, bulk density and the greater the sand content are,
the greater the thermal conductivity is, and the thermal conductivity has certain regional
characteristics. Among the soil, thermal conductivity is high, the north and south were on both
sides of the lower tendency in the saddle. The research will be for the local soil moisture, air and
thermal parameters field scale space mutation research to provide a certain reference basis.
Number of references: 31
Main heading: Geologic models
Controlled terms: Agriculture - Air permeability - Fractal dimension - Heat transfer
- Hydraulic conductivity - Kinetic parameters - Moisture - Moisture determination
- Research - Soil moisture
- Soils - Space applications - Spatial variables
measurement - Statistical methods - Thermal conductivity - Thermal conductivity of
gases
Uncontrolled terms: Determination coefficients - Geo-statistics - Saturated hydraulic
conductivity - Soil hydraulic parameters - Soil water conductivities - Spatial
autocorrelations - Spatial variability - Variation characteristics
Classification code: 944.2 Moisture Measurements - 901.3 Engineering Research - 921
Mathematics - 922.2 Mathematical Statistics - 931 Classical Physics; Quantum Theory;
Relativity - 931.2 Physical Properties of Gases, Liquids and Solids - 943.2 Mechanical
Variables Measurements - 821 Agricultural Equipment and Methods; Vegetation and Pest
Control - 656 Space Flight - 641.2 Heat Transfer - 632.1 Hydraulics - 483.1 Soils and
Soil Mechanics - 481.1 Geology - 801.4 Physical Chemistry
DOI: 10.3969/j.issn.1002-6819.2013.09.013
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number: 20132516429404
Title: Quantitative analysis of soil erosion and nutrient loss in Yingwugou watershed of the Dan
River
Authors: Xu, Guoce1 ; Li, Zhanbin1, 2 ; Li, Peng2 ; Zhang, Tiegang2 ; Tang, Shanshan2/徐国策;李
占斌;李鹏;张铁钢;汤姗姗
Author affiliation: 1 State Key Laboratory of Soil Erosion and Dry-land Farming on the Loess
Plateau, Institute of Soil and Water Conservation, Chinese Academy of Sciences and Ministry of
Water Resources, Yangling, 712100, China
2 Key Laboratory of Northwest Water Resources and Environment Ecology of Ministry of
Education, Xi'an University of Technology, Xi'an, 710048, China
Corresponding author: Li, Z. (zhanbinli@126.com)
Source title: Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural
Engineering
Abbreviated source title: Nongye Gongcheng Xuebao
Volume: 29
Issue: 10
Issue date: May 15, 2013
Publication year: 2013
Pages: 160-167
Language: Chinese
ISSN: 10026819
CODEN: NGOXEO
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Engineering, Agricultural Exhibition Road South,
Beijing, 100026, China
Abstract: The quantitative study of soil erosion and nutrient loss in a small watershed can
provide an important basis for ecological protection, soil, and water conservation, and ecological
compensation in the water source areas of the South to North Water Diversion Project. Revised
universal soil loss equation (RUSLE) was used to estimate the soil erosion and nutrient loss
supported by the geographic information system (GIS) in the Yingwugou watershed; however, the
soil erosion intensity of the study area was classified. The results indicated that the annual soil
erosion modulus in the Yingwugou watershed was 3140 t/km2. This falls in the category of
moderate degree erosion. The area above high soil erosion intensity only accounted for 24.1%
but the soil erosion amount was 4573.0 t, which accounted for 84.8% of the annual soil erosion
amount. The high soil erosion area was mainly distributed in sloping cropland with big slopes,
which was the key management area. Soil erosion amounts under different land-use types
showed great differences. The annual soil erosion moduluses of forestland, grassland, and
cropland were 509.7, 1511.8, and 4606.5 t/km2, respectively. The annual soil erosion amount of
forestland and grassland was relatively small and the annual soil erosion amount of cropland
accounted for 95.3% of the total soil erosion amount in the study area. For each additional 5°
slope, the increased soil erosion modulus of different land uses was 1 to 2 times greater than that
of each additional 5m for slope length. The annual loss amount of total nitrogen, total
phosphorus, and organic matter in topsoil was 3.81, 3.52, and 101.45 t, respectively. The nutrient
loss of cropland was serious. The annual loss moduluses of total nitrogen, total phosphorus, and
organic matter with sediment were 1.01, 0.75, and 38.43 t/(km2 • a), respectively. The study
could provide a scientific basis for the control of soil erosion and water loss, non-point source
pollution, and the construction of clean, small watersheds in the water source area.
Number of references: 31
Main heading: Soil conservation
Controlled terms: Biogeochemistry - Biological materials - Ecology - Erosion Forestry - Geographic information systems - Land use - Landforms - Organic
compounds - River pollution
- Sediment transport - Soil pollution control - Soils
- Water conservation - Water pollution control - Watersheds
Uncontrolled terms: Ecological compensation - Non-point source pollution - Revised
universal soil loss equations - River watersheds - RUSLE - Soil and water conservation
- Soil nutrients - South-to-North water diversion project
Classification code: 481.1 Geology - 481.2 Geochemistry - 483 Soil Mechanics and
Foundations - 483.1 Soils and Soil Mechanics - 723.3 Database Systems - 804.1
Organic Compounds - 821.0 Woodlands and Forestry - 461.2 Biological Materials and
Tissue Engineering - 403 Urban and Regional Planning and Development - 407 Maritime
and Port Structures; Rivers and Other Waterways - 444 Water Resources - 444.1 Surface
Water - 453 Water Pollution - 453.2 Water Pollution Control - 454.3 Ecology and
Ecosystems
DOI: 10.3969/j.issn.1002-6819.2013.10.022
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number: 20132516432807
Title: Controlling of hardness of cast iron joint by manual arc welding
Authors: Xu, Jinfeng1 ; Ren, Yongming1 ; Zhai, Qiuya1/徐锦锋;任永明;翟秋亚
Author affiliation: 1 School of Materials Science and Engineering, Xi'an University of
Technology, Xi'an 710048, China
Corresponding author: Xu, J. (xu-zhai@xaut.edu.cn)
Source title: Hanjie Xuebao/Transactions of the China Welding Institution
Abbreviated source title: Hanjie Xuebao
Volume: 33
Issue: 11
Issue date: November 2012
Publication year: 2012
Pages: 105-109
Language: Chinese
ISSN: 0253360X
CODEN: HHPAD2
Document type: Journal article (JA)
Publisher: Harbin Research Institute of Welding, No. 111 He-Xing Lu, Harbin, China
Abstract: Repairing of casting defect for iron casting has great economic significance. The
relationship between welding parameters and joint microstructure along with hardness is
investigated by micro-alloyed gray cast iron homogenous electrodes and DC welding machine.
The results show that the welding parameters have significant effects on joint microstructure and
hardness. Keeping the welding current constant, the higher the preheating temperature is, the
more uniform the temperature distribution is and slower the cooling rate of joint is, the much
easier gray cast iron microstructure forms. Keeping the preheat temperature constant, with the
increase of welding current, welding heat input increases and the cooling rate of joint decreases,
which is easy to form gray cast iron microstructure with non-chilled phase. The welding
parameters should be controlled in the upper right zone of welding current-preheat
temperature-microstructure type diagram. By strictly controlling of welding current and preheat
temperature, and using small current to make a rendering combined with high-current
continuous welding process, the microstructure and hardness of joint can be effectively
controlled, obtaining the homogenous weld with excellent machinability.
Number of references: 7
Main heading: Cast iron
Controlled terms: Cooling - Defects - Electric welding - Hardness - Machinability
- Microstructure - Preheating - Repair - Welding electrodes
Uncontrolled terms: Casting defect - Cooling rates - Joint microstructures - Manual
arc welding - Preheat temperature - Preheating temperature - Welding current Welding parameters
Classification code: 951 Materials Science - 933 Solid State Physics - 913.5 Maintenance
- 641.2 Heat Transfer - 604.2 Machining Operations - 545.2 Iron Alloys - 538 Welding
and Bonding - 423 Non Mechanical Properties and Tests of Building Materials - 421
Strength of Building Materials; Mechanical Properties
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number: 20132416423756
Title: Microstructure and corrosion resistance of modified AZ31 magnesium alloy using
microarc oxidation combined with electrophoresis process
Authors: Yang, Wei1 ; Wang, Ping1 ; Guo, Yongchun1 ; Jiang, Bailing2 ; Yang, Fei2 ; Li, Jianping1/
杨威;王平;郭咏春;蒋百灵;;;
Author affiliation: 1 School of Materials Science and Chemical Engineering, Xi'An
Technological University, Xi'an 710032, China
2 School of Materials Science and Engineering, Xi'An University of Technology, Xi'an 710048,
China
Corresponding author: Guo, Y. (yc-guo@163.com)
Source title: Journal Wuhan University of Technology, Materials Science Edition
Abbreviated source title: J Wuhan Univ Technol Mater Sci Ed
Volume: 28
Issue: 3
Issue date: June 2013
Publication year: 2013
Pages: 612-616
Language: English
ISSN: 10002413
CODEN: JWUTE8
Document type: Journal article (JA)
Publisher: Wuhan Ligong Daxue, 122, Luoshi Road Wuhan Hubei, 430070, China
Abstract: A top electrophoresis coating was deposited on the surface microarc oxidation (MAO)
modified ceramic coating on AZ31 magnesium alloy. Microstructure and corrosion resistance of
this composite coating were studied by SEM, electrochemical potentiodynamic polarization, and
acid corrosion test. The results showed that the composite coating with a top electrophoresis
coating on the surface of ceramic coating exhibited a better corrosion resistance compared with
the coating formed by chemical conversion film combined with electrophoresis process.
Corrosive ions could permeate into the substrate with corrosion time, and the composite coating
was firstly destroyed around the scratch. The formation of composite coating with a higher
adhesive force due to the porosity of the ceramic coating contributed to the improved corrosion
resistance property. © 2013 Wuhan University of Technology and Springer-Verlag Berlin
Heidelberg.
Number of references: 20
Main heading: Corrosion resistance
Controlled terms: Adhesion - Ceramic coatings - Composite coatings Electrophoresis - Magnesium alloys - Microstructure
Uncontrolled terms: Acid corrosion - Adhesive force - AZ31 magnesium alloy Chemical conversions - Corrosion time - Electrochemical potentiodynamic polarizations
- Microarc oxidation
Classification code: 539.1 Metals Corrosion - 542.2 Magnesium and Alloys - 801
Chemistry - 813.2 Coating Materials - 933 Solid State Physics - 951 Materials Science
DOI: 10.1007/s11595-013-0739-9
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number: 20132516432765
Title: Pitting corrosion resistance of PH stainless steel of FV520B and its welding joint
Authors: Zhang, Min1 ; Zhang, Enhua1 ; Zhi, Jinhua1, 2 ; Meng, Qiang1 ; Zhang, Haicun2/张敏;
张恩华;
Author affiliation: 1 School of Material Science and Engineering, Xi'an University of
Technology, Xi'an 710048, China
2 Xi'an Shangu Power Co., Ltd, Xi'an 710075, China
Corresponding author: Zhang, M. (zhmmn@xaut.edu.cn)
Source title: Hanjie Xuebao/Transactions of the China Welding Institution
Abbreviated source title: Hanjie Xuebao
Volume: 33
Issue: 10
Issue date: October 2012
Publication year: 2012
Pages: 37-40
Language: Chinese
ISSN: 0253360X
CODEN: HHPAD2
Document type: Journal article (JA)
Publisher: Harbin Research Institute of Welding, No. 111 He-Xing Lu, Harbin, China
Abstract: The corrosion-resistance of the steel FV520B had been tested respectively in the HCl
and H2SO4 (10%) under the 35°C. The result showed that under the above condition the base
metal and the welding welding joint suffered a much more serious pitting corrosion in the HCl
(10%) than that in the H2SO4 of the same mass fraction, the chloridion has more serious
destructive effect on the passivation film of the stainless steel, which causes the deeper corrosive
pitting. while the corrosive effect of 10% mass fraction H2SO4 is relatively inferior, the corrosion
products are different either, but under the different corrosive environment, all the corrosive
level of the weld joint in the welding point is lower than the HAZ.
Number of references: 9
Main heading: Pitting
Controlled terms: Corrosion resistance - Microstructure - Stainless steel - Welding
Uncontrolled terms: Base metals - Corrosion products - Corrosive environment Destructive effects - Mass fraction - Passivation film - Welding joints - Welding
point
Classification code: 538.2 Welding - 539.1 Metals Corrosion - 545.3 Steel - 933 Solid
State Physics - 951 Materials Science
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number: 20132516433104
Title: Effect of trace boron addition on microstructure and properties of CuNiMnFe alloy
Authors: Zou, Jun-Tao1 ; Zhao, Jian-Ping1 ; Wang, Xian-Hui1 ; Liang, Shu-Hua1/邹军涛;赵建平;
王献辉;梁淑华
Author affiliation: 1 Shaanxi Province Key Laboratory for Electrical Materials and Infiltration
Technology, Xi'an University of Technology, Xi'an 710048, China
Corresponding author: Liang, S.-H. (liangsh@xaut.edu.cn)
Source title: Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals
Abbreviated source title: Zhongguo Youse Jinshu Xuebao
Volume: 23
Issue: 4
Issue date: April 2013
Publication year: 2013
Pages: 1005-1011
Language: Chinese
ISSN: 10040609
CODEN: ZYJXFK
Document type: Journal article (JA)
Publisher: Central South University of Technology, Hunan, Changsha, 410083, China
Abstract: In order to refine the dendrite and eliminate the segregation of CuNiMnFe alloy, the
molten CuNiMnFe alloy was modified by trace boron addition. The effect of the modification
treatment on microstructures and properties of the CuNiMnFe alloy was studied, the
microstructure and phase were characterized by the scanning electron microscope, transmission
electron microscope and energy dispersive spectrum, and the hardness and tensile strength of
alloys were measured on Brinell hardness tester and universal material testing machine,
respectively. The results show that B addition has a significant effect on the microstructures of
CuNiMnFe alloy. In the range of 0-0.15%B (mass fraction), the increased boron addition can
refine the dendrite microstructure, reduce the secondary dendrite arm spacing (SDAS) and the
amount of eutectic β phase, while the precipitation of the secondary β and nail-head γ phase
inside the dendrites increase. At 0.10%B, SDAS is the least, the lamellar eutectic β phase almost
disappears, and the obvious secondary β phase and nail-head γ phase inside the dendrite. With
the boron adding, the as-cast hardness and aged hardness of the CuNiMnFe alloy increase at first,
and then decrease. The as-cast CuNiMnFe alloy with 0.1%B addition has the peak hardness, and
the aged peak hardness can remain the maximum hardness value of HB380. The tensile strength
of aged CuNiMnFe alloy can reach up 1130 MPa.
Number of references: 20
Main heading: Cerium alloys
Controlled terms: Alloys - Boron - Brinell hardness testing - Dendrites
(metallography) - Hardness - Microstructure - Scanning electron microscopy Tensile strength - Transmission electron microscopy
Uncontrolled terms: Energy dispersive spectrum - Microstructure and properties Microstructures and properties - Modification - Precipitated phase - Scanning Electron
Microscope - Secondary dendrite arm spacing - Transmission electron microscope
Classification code: 933.1.2 Crystal Growth - 933 Solid State Physics - 741.3 Optical
Devices and Systems - 741.1 Light/Optics - 549.3 Nonferrous Metals and Alloys excluding
Alkali and Alkaline Earth Metals - 951 Materials Science - 547.2 Rare Earth Metals -
531.1 Metallurgy - 422.2 Strength of Building Materials : Test Methods - 422 Strength of
Building Materials; Test Equipment and Methods - 421 Strength of Building Materials;
Mechanical Properties - 531.2 Metallography
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
© 2013 Elsevier Inc. All rights reserved.
20130706 新增 12 条
1.
Accession number:
20132616443185
Title:
Reservoir systems operation model using simulation and neural network
Authors:
Chang, Jianxia1, 2 ; Wang, Yimin1 ; Huang, Qiang1/畅建霞;王义民;黄强
Author affiliation:
1
Xi 'An University of Technology, Shaan xi, Xi' an, 710048, China
2
Xi'An University of Architecture and Technology, Shaan xi, Xi' an, 710048, China
Source title:
Artificial Intelligence Applications and Innovations - IFIP TC12 WG12.5 - 2nd
IFIP Conference on Artificial Intelligence Applications and Innovations, AIAI 2005
Abbreviated source title:
IFIP TC WG - IFIP Conf. Artif. Intell. Appl. Innovations, AIAI
Monograph title:
Artificial Intelligence Applications and Innovations - IFIP TC12 WG12.5 2nd IFIP Conference on Artificial Intelligence Applications and Innovations, AIAI 2005
Issue date:
2005
Publication year:
2005
Pages:
519-526
Language:
English
ISBN-10:
0387283188
ISBN-13:
9780387283180
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Artificial Intelligence Applications and
Innovations, AIAI 2005
Conference date:
September 7, 2005 - September 9, 2005
Conference location:
Beijing, China
Conference code:
97354
Sponsor:
IFIP Tech. Comm. Artif. Intell. (Tech. Comm.); Working Group 12.5 (Artificial
Intelligence Applications)
Publisher:
Springer Science and Business Media, LLC, 233 Spring Street, New York, NY
10013, United States
Abstract:
For multi-reservoir operating rules, a simulation-based neural network model is
developed in this study. In the suggested model, multi-reservoir operating rules are derived using
a neural network from the results of simulation. The training of the neural network is done using
a supervised learning approach with the back propagation algorithm. The Yellow River upstream
multi reservoir system is used for this study. This paper presents the usefulness of the neural
network in deriving general operating policies for a multi-reservoir system.
Number of references:
8
Main heading:
Computer simulation
Controlled terms:
Neural networks
Uncontrolled terms:
Multi-reservoir systems - Neural network model - Operating
policies - Reservoir operating rules - Reservoir systems - Simulation model - Supervised
learning approaches - Yellow river
Classification code:
723.4 Artificial Intelligence - 723.5 Computer Applications
DOI:
10.1007/0-387-29295-0-56
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number:
20132616453998
Title:
Preparation of amorphous alloy atomization process numerical simulation and the
formulation of process parameters by bar plasma spray
Authors:
Feng, La-Jun1 ; Wang, Guan-Chong1 ; Yan, Ai-Jun1, 2/冯拉俊;王官充;闫爱军
Author affiliation:
1
College of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048,
China
2
Shaanxi Electricity Power Research Institute, Xi'an 710054, China
Corresponding author:
Wang, G.-C.
Source title:
Gongneng Cailiao/Journal of Functional Materials
Abbreviated source title:
Gongneng Cailiao
Volume:
44
Issue:
7
Issue date:
April 15, 2013
Publication year:
2013
Pages:
1059-1062
Language:
Chinese
ISSN:
10019731
CODEN:
GOCAEA
Document type:
Journal article (JA)
Publisher:
Journal of Functional Materials, P.O. Box 1512, Chongqing, 630700, China
Abstract:
In accordance with past achievement in one-dimensional stable fluid dynamic by
flame spray, an atomization mechanism was provided in preparation of amorphous coating by
bar material plasma spraying. It is found that the measured particle median diameter agree well
with those obtained by numerical simulation. It shows that the mechanism of atomization is
feasible by bar material plasma spaying. Two main process parameters are optimized to produce
ferrous amorphous coating; the parameters includes primary gas pressure and secondary gas
pressure. The results show that it can be obtained amorphous coating with 3 mm crystal bar
Fe80P13C7 and Fe72Cr8P13C7. The spray coating process parameters are as follows: spraying
electric voltage of 55 V, spraying electric current of 600 A, distance between nozzle and bar of 4
mm, bar velocity of 50 mm/min, spraying distance of 100 mm, spraying angle about of 90°,
primary gas pressure of 0.85 MPa and secondary gas pressure of 0.32 MPa.
Number of references:
11
Main heading:
Computer simulation
Controlled terms:
Amorphous alloys - Atomization - Chromate coatings - Flame
spraying - Plasma jets - Plasma spraying - Spray nozzles
Uncontrolled terms:
Amorphous coating - Atomization mechanism - Atomization
process - Electric voltage - Median diameters - Process parameters - Spray coating
process - Spraying distance
Classification code:
817.2 Polymer Applications - 813.2 Coating Materials - 802.3
Chemical Operations - 932.3 Plasma Physics - 723.5 Computer Applications - 631.1 Fluid
Flow, General - 531 Metallurgy and Metallography - 631.1.2 Gas Dynamics
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number:
20132616454053
Title:
Mechanical properties of composite ceramic coatings plasma-sprayed on
magnesium alloy
Authors:
Feng, La-Jun1 ; Lei, A-Li1 ; Wang, Guan-Chong1 ; Xu, Yong-Zheng1 ; Zhang, Jing1/
冯拉俊;雷阿利;王官充;许永征;张静
Author affiliation:
1
School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048,
China
Corresponding author:
Feng, L.-J.
Source title:
Gongneng Cailiao/Journal of Functional Materials
Abbreviated source title:
Gongneng Cailiao
Volume:
44
Issue:
9
Issue date:
May 15, 2013
Publication year:
2013
Pages:
1298-1300+1304
Language:
Chinese
ISSN:
10019731
CODEN:
GOCAEA
Document type:
Journal article (JA)
Publisher:
Journal of Functional Materials, P.O. Box 1512, Chongqing, 630700, China
Abstract:
Aiming at the reality of aluminium piston surface easy scratches, in this paper the
composite ceramic coating was deposited on XGFH-3 aluminium substrate by plasma spraying
with composite ceramic powder prepared by mechanical ball milling and PVA granulating
technology. The bond strength between the coating and substrate, the coating microhardness
and the wear resistance for coating and substrate were measured by using oxygen to feed
powder without transition layer. The results showed that the maximum bond strength, 19.07
MPa, for the coating sprayed with powder milled for 16 h were reached. The maximum
microhardness of the coating, HV0.11105, was realized, which was 16 times harder than the
substrate. The wear mass per unit area of the substrate was about 8.5 times larger than the
coatings, of which the maximum, 13.6 times, was realized.
Number of references:
13
Main heading:
Aluminum alloys
Controlled terms:
Aluminum - Ball milling - Bond strength (materials) - Ceramic
coatings - Magnesium alloys - Mechanical alloying - Microhardness - Plasma
jets - Plasma spraying - Substrates - Wear resistance
Uncontrolled terms:
Composite ceramic - Composite ceramic coating - Mechanical
ball milling - Per unit - Plasma-sprayed - Properties of composites - Transition layers
Classification code:
932.3 Plasma Physics - 813.2 Coating Materials - 801
Chemistry - 631.1.2 Gas Dynamics - 542.2 Magnesium and Alloys - 951 Materials
Science - 541.2 Aluminum Alloys - 533.1 Ore Treatment - 531 Metallurgy and
Metallography - 461 Bioengineering and Biology - 421 Strength of Building Materials;
Mechanical Properties - 541.1 Aluminum
DOI:
10.3969/j.issn.1001-9731.2013.09.020
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number:
20132616443499
Title:
Mechanism of interaction between terahertz continuous wave and weakly ionized
plasma
Authors:
Hou, Lei1 ; Shi, Wei1/侯磊;施卫
Author affiliation:
1
Department of Applied Physics, Xi'an University of Technology, No.5 Jinhua South Road,
Shaanxi, 710048, China
Source title:
Laser and Tera-Hertz Science and Technology, LTST 2012
Abbreviated source title:
Laser Tera-Hertz Sci. Technol., LTST
Monograph title:
Laser and Tera-Hertz Science and Technology, LTST 2012
Issue date:
2012
Publication year:
2012
Language:
English
Document type:
Conference article (CA)
Conference name:
Laser and Tera-Hertz Science and Technology, LTST 2012
Conference date:
November 1, 2012 - November 2, 2012
Conference location:
Wuhan, China
Conference code:
97362
Sponsor:
Huazhong University of Science Technology; ICOglobe; Optical Valley of China OVC
Publisher:
Optical Society of American (OSA), 2010 Massachusetts Ave, NW, Washington,
DC, DC 20036, United States
Abstract:
Weakly ionized plasma in neon lamps can be used to detect terahertz waves. The
mechanism of interaction between terahertz continuous wave and weakly ionized plasma is
analyzed and verified by experiment. © 2012 OSA.
Number of references:
8
Main heading:
Plasmas
Controlled terms:
Electric lighting - Ionization
Uncontrolled terms:
Continuous Wave - Tera Hertz - Weakly ionized plasma
Classification code:
707.1 Electric Lighting - 802.2 Chemical Reactions - 932.3 Plasma
Physics
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number:
20132616448511
Title:
Research on the red-yellow-blue partition method for water resources
management
Authors:
Huang, Jun-Ming1 ; Xie, Jian-Cang1 ; Lu, You-Xing2 ; Sun, Bo1/黄俊铭;解建仓;卢
友行;孙博
Author affiliation:
1
Northwest Key Laboratory of Water Resources and Environment Ecology, Ministry of
Education, Xi'an University of Technology, Xi'an 710048, China
2
Quanzhou Water of Fujian Province, Quanzhou 362000, China
Corresponding author:
Huang, J.-M. (secretaa@163.com)
Source title:
Shuili Xuebao/Journal of Hydraulic Engineering
Abbreviated source title:
Shuili Xuebao
Volume:
44
Issue:
5
Issue date:
May 2013
Publication year:
2013
Pages:
527-533
Language:
Chinese
ISSN:
05599350
CODEN:
SLHPBI
Document type:
Journal article (JA)
Publisher:
China Water Power Press, no. 1 Xikang Road, Nanjing, 210024, China
Abstract:
Research on water resources partition management has great significance for
putting strict water resources management system and building a water-saving society. According
to the similarity of the situation of water resources utilization and the effects of
water-environment, the river basin water resources can be managed in three subregions marked
with different colors of red, yellow and blue using extended near? est neighbor algorithms, and
taking different water resources management measures for different subregions accordingly.
Based on the case study of Quanzhou city, the authors created a red-yellow-blue partition system
with visualization for water resources management, and put forward corresponding management
mode and countermeasures for each subregion. The results show that such partition method
works well and reduces the effects of differences in zoning indicators on regionalization; and the
development of the red-yellow-blue partition system is conductive to the realization of dynamic
and strict basin water resources management.
Number of references:
15
Main heading:
Water resources
Controlled terms:
Algorithms - Flow
visualization - Management - Research - Visualization - Water conservation
Uncontrolled terms:
Management modes - Nearest neighbor algorithm - Partition
methods - Partition systems - Quanzhou city - River basin water resource
(RBWR) - Water resources management - Water resources utilizations
Classification code:
921 Mathematics - 912.2 Management - 902.1 Engineering
Graphics - 901.3 Engineering Research - 723 Computer Software, Data Handling and
Applications - 631.1 Fluid Flow, General - 444 Water Resources
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number:
20132616454206
Title:
Permanent faults identification using least squares fitting algorithm for
three-phase reclosure in transmission lines with shunt reactors
Authors:
Liang, Zhenfeng1, 2 ; Suonan, Jiale1 ; Kang, Xiaoning1 ; Song, Guobing1/梁振峰;索
南加勒
Author affiliation:
1
School of Electrical Engineering, Xi'an Jiaotong University, Xi'an 710049, China
2
Institute of Water Resources and Hydro-Electric Engineering, Xi'an University of Technology,
Xi'an 710048, China
Corresponding author:
Kang, X.
Source title:
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University
Abbreviated source title:
Hsi An Chiao Tung Ta Hsueh
Volume:
47
Issue:
6
Issue date:
June 2013
Publication year:
2013
Pages:
85-89+96
Language:
Chinese
ISSN:
0253987X
CODEN:
HCTPDW
Document type:
Journal article (JA)
Publisher:
Xi'an Jiaotong University, West Xian Ning Road 28, Xi'an, 710049, China
Abstract:
To heighten sensitivity of permanent fault identification for
single-phase-to-ground fault, a three-phase adaptive reclosure in transmission lines with shunt
reactors is developed. It is found that the shunt reactor zero modal current gets with different
free oscillation frequencies in transient fault or permanent fault fin the case of
single-phase-to-ground. An identification model of shunt reactor zero-modal current is
established, which includes decaying DC component and two frequency components
corresponding to transient fault and permanent fault. Once the single-phase-to-ground fault
occurs and circuit breakers open, each frequency component is obtained by least square fitting,
where shunt reactor zero-modal current is available. The amplitudes of various frequency
components are adopted to distinguish the permanent faults from transient faults. EMTP
simulation shows that the proposed scheme is of higher sensitivity and freedom from the
influences of transient resistance and fault position in permanent faults identification for
transmission lines with shunt reactors.
Number of references:
13
Main heading:
Power quality
Controlled terms:
Electric fault currents - Electric grounding - Electric lines - Electric
reactors - Fault tree analysis - Reclosing circuit breakers - Transmission line theory
Uncontrolled terms:
Decaying DC components - Free oscillation frequencies - Least
squares fitting - Least-square fitting - Shunt reactors - Single phase to ground
faults - Three-phase adaptive reclosure - Transient resistance
Classification code:
421 Strength of Building Materials; Mechanical Properties - 704
Electric Components and Equipment - 704.1 Electric Components - 706 Electric Transmission
and Distribution - 921 Mathematics
DOI:
10.7652/xjtuxb201306015
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number:
20132616454015
Title:
In-situ synthesis of zinc prophyrin sensitized TiO2 photocatalyst and its
photocatalytic activity
Authors:
Niu, Jin-Fen1 ; Yao, Bing-Hua1 ; Yu, Xiao-Jiao1 ; Peng, Chao1 ; Lu, Lei-Lei1/钮金芬;
姚秉华;余晓皎;彭超;路蕾蕾
Author affiliation:
1
School of Science, Xi'an University of Technology, Xi'an 710048, China
Corresponding author:
Yao, B.-H.
Source title:
Gongneng Cailiao/Journal of Functional Materials
Abbreviated source title:
Gongneng Cailiao
Volume:
44
Issue:
8
Issue date:
April 30, 2013
Publication year:
2013
Pages:
1132-1135
Language:
Chinese
ISSN:
10019731
CODEN:
GOCAEA
Document type:
Journal article (JA)
Publisher:
Journal of Functional Materials, P.O. Box 1512, Chongqing, 630700, China
Abstract:
The zinc porphyrin (ZnTHPP) sensitized TiO2 photocatalysts were synthesized by
in-situ solvothermal method. The photocatalysts were characterized by XRD, SEM, VU-Vis, and
TG-DTA. The results showed that ZnTHPP was indeed appeared during the in-situ method, and
the crystal structure and morphology of TiO2 were not affected by the existance of porphyrin.
The TG-DTA and degradation test results show that ZnTHPP-TiO2 composite exhibited the better
thermal stability and catalytic activity than those prepared by simple physical adsorption method.
Number of references:
15
Main heading:
Photocatalysts
Controlled terms:
Aromatic compounds - Photocatalysis - Porphyrins - Titanium
dioxide - Zinc - Zinc compounds
Uncontrolled terms:
In-situ preparations - Methylene
Blue - Sensitized - TiO - Zinc porphyrins
Classification code:
546.3 Zinc and Alloys - 741.1 Light/Optics - 803 Chemical Agents
and Basic Industrial Chemicals - 804.1 Organic Compounds - 804.2 Inorganic Compounds
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number:
20132616454181
Title:
An experimental study on hydraulic characteristics of a novel aerator
Authors:
Niu, Zhengming1 ; Nan, Junhu1, 2 ; Hong, Di1, 3/牛争鸣;;;
Author affiliation:
1
Institute of Water Resources and Hydro-Electric Engineering, Xi'an University of Technology,
Xi'an 710048, China
2
School of Energy and Power Engineering, Lanzhou University of Technology, Lanzhou 730050,
China
3
Yellow River Upstream Hydropower Limited Liability Company, Xining 810209, China
Corresponding author:
Nan, J. (nanjh@yahoo.cn)
Source title:
Shuikexue Jinzhan/Advances in Water Science
Abbreviated source title:
Shuikexue Jinzhan
Volume:
24
Issue:
3
Issue date:
May 2013
Publication year:
2013
Pages:
372-378
Language:
Chinese
ISSN:
10016791
CODEN:
SHUJE6
Document type:
Journal article (JA)
Publisher:
China Water Power Press, no. 1 Xikang Road, Nanjing, 210024, China
Abstract:
The use of an annularaerator placing in the vertical shaft of flood discharge tunnel
is a new engineering idea, and is different from the traditional ones. In order to better
understand this new type of technology, the ventilation and aeration characteristics of the
annular aerator are studied based on the prototype and modeling experiments carried out in the
gyrating discharge tunnel of the Gongboxia Hydropower Project. The results show that the
ventilation is caused by the pressure difference of air vents.The relationship between the
ventilation and relative cavity length follows the linear distribution. The aeration effect on the
annular aerator is obvious. The jet is striking water in the shaft, and then a large-scale aerated
vortex is generated with bubbles thereby contributing to the aeration forming. The aeration
concentration presents a power distribution in the vertical shaft. The ventilation and aeration
scale effects of models are both obvious. Therefore, the use of an annular aerator is necessary to
set in the vertical shaft of gyrating discharge tunnel while satisfying the structural designs
demands, which can improve the flow pattern and increase the energy dissipation significantly.
Number of references:
11
Main heading:
Ventilation
Controlled terms:
Buoyancy - Energy dissipation - Structural design - Water aeration
Uncontrolled terms:
Annular aerator - Experimental studies - Flood discharge
tunnel - Hydraulic characteristic - Hydropower projects - Linear distribution - Pressure
differences - Vertical shaft
Classification code:
408.1 Structural Design, General - 445.1 Water Treatment
Techniques - 525.4 Energy Losses (industrial and residential) - 631 Fluid Flow - 643.5
Ventilation
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number:
20132616454297
Title:
A current distribution strategy for parallel DC-DC converters based on the
efficiency model
Authors:
Sun, Jinkun1 ; Liu, Qingfeng1 ; Leng, Zhaoxia1 ; Wang, Huamin1 ; Tong,
Xiangqian1/孙金坤;刘庆丰;冷朝霞;王华民;同向前
Author affiliation:
1
School of Automation and Information Engineering, Xi'an University of Technology, Xi'an
710048, Shaanxi Province, China
Corresponding author:
Sun, J. (sunjinkun@gmail.com)
Source title:
Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of
Electrical Engineering
Abbreviated source title:
Zhongguo Dianji Gongcheng Xuebao
Volume:
33
Issue:
15
Issue date:
May 25, 2013
Publication year:
2013
Pages:
10-18
Language:
Chinese
ISSN:
02588013
CODEN:
ZDGXER
Document type:
Journal article (JA)
Publisher:
Chinese Society of Electrical Engineering, Qinghe, Beijing, 100085, China
Abstract:
For utilizing energy availably, the system efficiency of distributing power supply
ought to be improved possibly; the system is composed of DC-DC converters with uniform or
different power grade. In this paper, the efficiency model of Buck converters in the continuous
conduction mode (CCM) was educed based on the average loss, and the calculation method of
parameters for the efficiency model was given. For optimizing the operation efficiency of the
paralleled system, the current distribution strategy based on the efficiency model was presented.
The optimization object function of the Buck converter paralleled system was designed. The
calculation method of module currents was deduced and the constraint condition of currents was
analyzed. The adjust method of the paralleled module number was also given. Numerical
simulations and experiments were done. It is validated that the efficiency of the paralleled
system can be improved adopting the current distribution strategy based on efficiency
optimization, which is compared with the system adopting the average current distribution. ©
2013 Chin. Soc. for Elec. Eng.
Number of references:
20
Main heading:
DC-DC converters
Controlled terms:
Efficiency - Electric current distribution
measurement - Losses - Optimization
Uncontrolled terms:
Constraint conditions - Continuous conduction
mode - Current-sharing - Efficiency optimization - Operation efficiencies - Optimization
object function - Parallel DC-DC converters - Paralleling
Classification code:
704.1 Electric Components - 911.2 Industrial Economics - 913.1
Production Engineering - 921.5 Optimization Techniques - 942.2 Electric Variables
Measurements
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
10.
Accession number:
20132516439029
Title:
A novel control system design based on solid the PLC
Authors:
Wei, Wei1 ; Zhang, Jing1 ; Li, Hongye1 ; Hu, Jie1 ; Wang, Wei1 ; Yin, Xiaoyan2 ;
Wang, Feng1 ; Song, Xin1 ; Wang, Zhixiao1 ; Wang, Yongchao1 ; Shen, Peiyi3 ; Geng, Jiachen1/魏
嵬;张璟;;;王伟;;
Author affiliation:
1
School of Computer Science and Engineering, Xi' an University of Technology, Xi' an 710048,
China
2
Department of Computer Science and Technology, Northwest University, Xi'an 710127,
China
3
National School of Software, Xidian University, 710071, Xi'an, Shaanxi, China
Corresponding author:
Wei, W.
Source title:
Information Technology Journal
Abbreviated source title:
Inf. Technol. J.
Volume:
12
Issue:
7
Issue date:
2013
Publication year:
2013
Pages:
1464-1467
Language:
English
ISSN:
18125638
E-ISSN:
18125646
Document type:
Journal article (JA)
Publisher:
Asian Network for Scientific Information, 308-Lasani Town, Sargodha Road,
Faisalabad, Pakistan
Abstract:
This system uses Mitsubishi PLC and computer configuration screen monitoring
control mode, press the button or picture can complete automobile access process, simple
operation, easy access. Control circuit of traditional way by ac contactor, safe and reliable
operation. Through the configuration software, database construction, the animation process
control, connection and debugging, realized the monitoring system of three-dimensional garage.
Finally discusses in detail the design of control system based on the two layers of garage structure
for three models. Finally discusses in detail the design of control system based on the two layers
of garage structure for three models. Lift the solid carport, its part can be divided into three parts:
the garage structure parts, motivation and control system is part. According to lift the operating
principle of the solid carport, on the fluctuation of three-dimensional garage control system
design, uses the advanced PLC control, using the software Mitsubishi of lifting the solid carport
control procedures, commissioning, operation and proved by using the Programmable Logic
Controller (PLC) as the control system is simple. © 2013 Asian Network for Scientific Information.
Number of references:
3
Main heading:
Program debugging
Controlled terms:
Access control - Animation - Computer control
systems - Computer software - Control systems - Garages (parking) - Systems
analysis - Three dimensional
Uncontrolled terms:
Computer configuration - Configuration software - Design of
control system - Parking systems - Plc controllers - Programmable logic controllers
(PLC) - Simulation software - Three-dimensional garages
Classification code:
402.2 Public Buildings - 723 Computer Software, Data Handling and
Applications - 731.1 Control Systems
DOI:
10.3923/itj.2013.1464.1467
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
11.
Accession number:
20132616444904
Title:
A hybrid method to deformation force of high-speed cold roll-beating forming
Authors:
Yang, Ming-Shun1 ; Li, Yan1 ; Yuan, Qi-Long1/杨明顺;李言;袁启龙
Author affiliation:
1
School of Mechanical and Precision Instrument Engineering, Xi' An University of Technology,
Xi' an 710048, China
Source title:
Journal of Digital Information Management
Abbreviated source title:
J. Digit. Inf. Manage.
Volume:
11
Issue:
2
Issue date:
April 2013
Publication year:
2013
Pages:
146-153
Language:
English
ISSN:
09727272
Document type:
Journal article (JA)
Publisher:
Digital Information Research Foundation, 2 Srinivasamoorthy Avenue, L.B
Road, Adyar, Chennai, 600 020, India
Abstract:
High-speed cold roll-beating forming technique is a new near-net plastic forming
method that the intermittent high-speed roll-beating is used to achieve dynamic impact local
loading, and that is fast, transient, high impact, large deformation of the complex forming
process. For this forming process, the main stress method is employed to derive an analytic
formula for the deformation force. Taking into account the main stress method can not reflect
impact factors such as high-speed transient roll beating in process of this analytic solution, then
the ABAQUS/Explicit is applied to simulate for highspeed cold roll- beating. The regression
analysis is used to correct for the analytic formula based on simulation results, which makes the
analytic formula more accurate reflection of deformation force of the different technological
parameters of high-speed cold roll-beating. The forming experiments are carried out with self
developed high-speed cold roll-beating experimental equipment and the experimental of
deformation force is measured to verify the correctness of the corrected analytic formula.
Number of references:
12
Main heading:
Deformation
Controlled terms:
Analytic equipment - Loading - Regression analysis
Uncontrolled terms:
Cold roll-beating - Deformation forces - Experimental
equipments - Experimental verification - Forming experiments - Forming
techniques - Slab method - Technological parameters
Classification code:
421 Strength of Building Materials; Mechanical Properties - 422
Strength of Building Materials; Test Equipment and Methods - 672 Naval Vessels - 801
Chemistry - 922.2 Mathematical Statistics
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
12.
Accession number:
20132616448518
Title:
A soil water characteristic curve model considering void ratio variation with stress
Authors:
Zhang, Zhao1 ; Liu, Feng-Yin1 ; Zhao, Xu-Guang2 ; Zhou, Dong3/张昭;刘凤银;;
Author affiliation:
1
Institute of Geotechnical Engineering, Xi'an University of Technology, Xi'an 710048, China
2
China Water Resources Pearl River Planning Surveying and Designing Co. Ltd., Guangzhou
510610, China
3
Yellow River Engineering Consulting Co. Ltd., Zhengzhou 450003, China
Corresponding author:
Liu, F.-Y. (fyliu@pub.xaonline.com)
Source title:
Shuili Xuebao/Journal of Hydraulic Engineering
Abbreviated source title:
Shuili Xuebao
Volume:
44
Issue:
5
Issue date:
May 2013
Publication year:
2013
Pages:
578-585
Language:
Chinese
ISSN:
05599350
CODEN:
SLHPBI
Document type:
Journal article (JA)
Publisher:
China Water Power Press, no. 1 Xikang Road, Nanjing, 210024, China
Abstract:
Soil water characteristic curve plays a significant role in unsaturated soil mechanics,
geotechnical and geoenvironmental engineering. A series of soil water characteristic tests for
remoulded loess specimens under no stress state and certain consolidation stress states. For
Xi'an loess and Saskatchewan silt, Indian Head till in the past literatures, the result shows that the
evolutions of water-solid volumetric ratio with matric suction can be normalized by a single curve
in the certain consolidation or preconsolidation void ratio ranges. A new model considering void
ratio variation with stress is proposed based on van Genuchten model. In addition, the model can
not only be in good accordance with the test data, but also provide a new insight into the
hydro-mechanical constitutive relationship for unsaturated soils.
Number of references:
35
Main heading:
Geologic models
Controlled terms:
Sediments - Silt - Soil mechanics - Soil moisture - Stresses
Uncontrolled terms:
Consolidation stress - Constitutive
relationships - Geoenvironmental engineering - Soil water characteristics - Soil-water
characteristic curve - Unsaturated soil - Unsaturated soil mechanics - Void ratios
Classification code:
421 Strength of Building Materials; Mechanical Properties - 481.1
Geology - 483 Soil Mechanics and Foundations - 483.1 Soils and Soil Mechanics
Database:
Compendex
20130713 新增 7 条
1.
Accession number:
20133216582787
Title:
Soft-templated synthesis of mesoporous carbon nanospheres and hollow carbon
nanofibers
Authors:
Cheng, Youliang1, 2 ; Li, Tiehu2 ; Fang, Changqing1 ; Zhang, Maorong1 ; Liu,
Xiaolong1 ; Yu, Ruien1 ; Hu, Jingbo1/程有亮;李铁虎;方长青;张茂荣;刘晓龙;于瑞恩;胡京博
Author affiliation:
1
School of Printing and Packaging Engineering, Xi'An University of Technology, Xi'an 710048,
China
2
School of Materials Science and Engineering, Northwestern Polytechnical University, Xi'an
710072, China
Corresponding author:
Fang, C. (funivy@163.com)
Source title:
Applied Surface Science
Abbreviated source title:
Appl Surf Sci
Volume:
282
Issue date:
October 1, 2013
Publication year:
2013
Pages:
862-869
Language:
English
ISSN:
01694332
CODEN:
ASUSEE
Document type:
Journal article (JA)
Publisher:
Elsevier, P.O. Box 211, Amsterdam, 1000 AE, Netherlands
Abstract:
Using coal tar pitch based amphiphilic carbonaceous materials (ACMs) as the
precursor and amphiphilic triblock copolymer Plutonic P123 as the only soft template, carbon
nanospheres with partially ordered mesopores and hollow carbon nanofibers were synthesized.
The concentration of P123, cp, and the mass ratio of P123 to ACM, r, are the key parameters of
controlling the shape of the as-prepared products. Mesoporous carbon nanospheres with
diameter of 30-150 nm were prepared under the condition of cp = 13.3 g/L and r = 1.2. When cp
= 26.7 g/L and r = 2, hollow carbon nanofibers with diameters of 50-200 nm and
mesopores/macropores were obtained. Carbon nanospheres and hollow carbon fibers were
amorphous materials. The mesoporous carbon nanospheres show good stability in the cyclic
voltammograms and their specific capacitance at 10 mV s-1 is 172.1 F/g. © 2013 Elsevier B.V. All
rights reserved.
Number of references:
30
Main heading:
Nanospheres
Controlled terms:
Amorphous materials - Carbon nanofibers - Mesoporous
materials - Nanofibers - Porous materials
Uncontrolled terms:
Amphiphilic triblock copolymers - Carbon
nanosphere - Carbonaceous materials - Coal tar pitch - Cyclic
voltammograms - Mesoporous carbon - Ordered mesopores - Specific capacitance
Classification code:
761 Nanotechnology - 931.2 Physical Properties of Gases, Liquids and
Solids - 933 Solid State Physics - 933.2 Amorphous Solids - 951 Materials Science
DOI:
10.1016/j.apsusc.2013.06.072
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number:
20132716460454
Title:
Drawing clustered Graph using modular decomposition tree
Authors:
Deng, Wan-Yu1 ; Zhang, Kai1 ; Zheng, Qing-Hua1 ; Wei, Wei2/;;;魏嵬
Author affiliation:
1
School of Computer, Xi'an University of Posts and Telecommunications, Xi'an, Shaan'xi, RPC,
710121, China
2
School of Computer Science and Engineering, Xi'an University of Technology, Xi'an, 710048,
China
Corresponding author:
Deng, W.-Y.
Source title:
Information Technology Journal
Abbreviated source title:
Inf. Technol. J.
Volume:
12
Issue:
8
Issue date:
2013
Publication year:
2013
Pages:
1491-1501
Language:
English
ISSN:
18125638
E-ISSN:
18125646
Document type:
Journal article (JA)
Publisher:
Asian Network for Scientific Information, 308-Lasani Town, Sargodha Road,
Faisalabad, Pakistan
Abstract:
Compared with macro visualization like small-world structure in WWW, some
fields such as knowledge visualization need such layout that can show detailed information of
nodes and at the same time can reveal clustered structure of the Graph. Based on modular
decomposition, energy model and adjustable center distance, one hierarchical layout algorithm
was proposed. Through modular decomposition, the graph was firstly represented by a tree
hierarchically. The local positions were then obtained from bottom to top and then the global
positions are obtained from top to bottom. The experimental results on various datasets showed
that the algorithm can achieve artistic and nearly non-overlapping appearance. © 2013 Asian
Network tor Scientific Information.
Number of references:
17
Main heading:
Trees (mathematics)
Controlled terms:
Algorithms - Forestry - Information systems - Visualization
Uncontrolled terms:
Center distance - Clustered graph - Clustered
structure - Graph layout - Information visualization - Knowledge Visualization - Layout
algorithms - Modular decomposition
Classification code:
723 Computer Software, Data Handling and Applications - 821.0
Woodlands and Forestry - 902.1 Engineering Graphics - 903.2 Information
Dissemination - 921 Mathematics - 921.4 Combinatorial Mathematics, Includes Graph
Theory, Set Theory
DOI:
10.3923/itj.2013.1491.1501
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number:
20132716470849
Title:
The dynamic stable region of drilling tools system in deep hole drilling
Authors:
Kong, Ling-Fei1 ; Li, Yan1 ; Lyu, Yan-Jun1 ; Tang, Ao-Fei1/孔令飞;李言;吕延军;汤奥
斐
Author affiliation:
1
School of Mechanic and Precision Instrument Engineer, Xi'an University of Technology, Xi'an
710048, Shaanxi, China
Corresponding author:
Kong, L.-F. (lingfeikong@xaut.edu.cn)
Source title:
Binggong Xuebao/Acta Armamentarii
Abbreviated source title:
Binggong Xuebao
Volume:
34
Issue:
5
Issue date:
May 2013
Publication year:
2013
Pages:
611-619
Language:
Chinese
ISSN:
10001093
CODEN:
BIXUD9
Document type:
Journal article (JA)
Publisher:
China Ordnance Society, P.O. Box 2431, Beijing, 100081, China
Abstract:
Based on the extended Hamilton principle, the finite element model of lateral
vibration of drilling shaft is established using Timoshenko element model. Under the condition of
maintain nonlinear analysis precision, the linear degrees of drilling shaft system will be truncated
using mode synthesis technique with free-interface but its nonlinear degrees are retained in the
physical space, and simultaneously, the eliminated eigenmodes are compensated with the
residual attachment modes. So the DOF of the coupled system is reduced. Based on the updated
model, the natural frequency influence rules of the drilling shaft system, as changing the distance
of the intermediate supports, the length of drilling shaft and its the inner diameter, are discussed.
By drilling the structural style of intersection hole as an example, the dynamic stable region and
instability modes of the drilling shaft system are analyzed under the different rotating speed and
drilling depth in drilling process. The numerical results show that the proposed methods for the
dynamic design of complex drilling deep hole machine and the analysis of machining accuracy
provide a theoretical basis.
Number of references:
14
Main heading:
Numerical methods
Controlled terms:
Machinery - Machining - Nonlinear analysis
Uncontrolled terms:
Deep hole drilling - Drilling tool - Machinery
manufacture - Modal reduction - Stable region
Classification code:
601 Mechanical Design - 604.2 Machining Operations - 921
Mathematics - 921.6 Numerical Methods
DOI:
10.3969/j.issn.1000-1093.2013.05.016
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number:
20132716461206
Title:
Dynamic mechanics of soil erosion by runoff on loess slope
Authors:
Peng, Li1 ; Linhong, Zhang1 ; Zhanbin, Li1, 2 ; Liangyong, Zheng1, 3/李鹏;;李占斌;;
Author affiliation:
1
Xi'an University of Technology, Xi'an Shaanxi, 710048, China
2
Institute of Soil and Water Conservation, Chinese Academy of Sciences, Ministry of Water
Resource, Yangling Shaanxi, 712100, China
3
Shandong Survey and Design Insititute of Water Conservancy, Jinan, Shandong, 250013,
China
Source title:
Nature Environment and Pollution Technology
Abbreviated source title:
Nat. Environ. Pollut. Technol.
Volume:
12
Issue:
2
Issue date:
June 2013
Publication year:
2013
Pages:
297-301
Language:
English
ISSN:
09726268
Document type:
Journal article (JA)
Publisher:
Technoscience Publications, 2, Shila Apartment, Shila Nagar, Near T.V.Tower,
Karad- 415110, Maharastra, India
Abstract:
In this research, soil erosion and sediment yield were calculated by runoff shear
stress, runoff energy consumption and runoff power theory. Results indicated that a linear
relationship existed between the average runoff shear stress and sediment yield. Soil erodibility
in the experiment was 178.5g/(Pa·min), and the critical shear stress value was 0.54 Pa. Results
from energy consumption implied that there was also a linear relationship between sediment
transportation and energy consumption of runoff unit width: Dr = 14.61 (ΔE-0.37), which
indicated that the soil erodibility was 14.61g/J, with a critical energy consumption of
0.37J/(min·cm). Results from runoff power theory showed that sediment transportation
increased with increase in runoff power, and the simple linear relationship was also regressed: Y
= 8942.2x - 68.676. Generally, these three theories each showed certain advantages in describing
the soil erosion processes on the slope, among which the results from energy consumption
theory were simpler, more accurate, and proved more convenient in describing soil erosion on
the slope.
Number of references:
20
Main heading:
Runoff
Controlled terms:
Energy
utilization - Erosion - Sedimentology - Sediments - Shear stress - Soils
Uncontrolled terms:
Critical shear stress - Linear relationships - Loess
slopes - Runoff energy consumption - Runoff shear stress - Sediment
transportation - Simple linear relationship - Soil erosion
Classification code:
421 Strength of Building Materials; Mechanical Properties - 444.1
Surface Water - 481.1 Geology - 483 Soil Mechanics and Foundations - 483.1 Soils and Soil
Mechanics - 525.3 Energy Utilization
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number:
20132716461190
Title:
Effect of vegetation cover types on soil infiltration under simulating rainfall
Authors:
Pingping, Huang1 ; Xue, Sha2, 3 ; Li, Peng1 ; Zhanbin, Li1, 2, 3/;薛萐;李鹏;李占斌
Author affiliation:
1
Key Lab of Northwest Water Resources and Environment Ecology of MOE, Xi'an University of
Technology, Xi'an, Shaanxi 710048, China
2
State Key Laboratory of Soil Erosion and Dryland Farming, Loess Plateau of Northwest A and
F University, Yangling, Shaanxi, 712100, China
3
Institute of Soil and Water Conservation, Chinese Academy of Sciences and Ministry of
Education, Yangling, Shaanxi, 712100, China
Source title:
Nature Environment and Pollution Technology
Abbreviated source title:
Nat. Environ. Pollut. Technol.
Volume:
12
Issue:
2
Issue date:
June 2013
Publication year:
2013
Pages:
193-198
Language:
English
ISSN:
09726268
Document type:
Journal article (JA)
Publisher:
Technoscience Publications, 2, Shila Apartment, Shila Nagar, Near T.V.Tower,
Karad- 415110, Maharastra, India
Abstract:
In this study, simulated rainfall was applied to study the process of runoff
generation and water infiltration under the cover of herbaceous vegetation at the preliminary
succession stages. Results indicated that at the preliminary succession stages, as soil texture was
loose, water infiltration was high. With the vegetation succession and the accumulation of
organic matter in the soil, both physical and chemical properties of the soil were improved, which
made the soil texture tight, and water infiltration rates decrease. With the progress of the rainfall,
parts of the microbiotic soil crust were destroyed by raindrop impact, and water infiltration rates
were improved. This result indicated that the existence of microbiotic soil crust reduced the soil
infiltration rate. Thus, it is of great importance to improve soil infiltration by destroying the
microbiotic soil crust with proper measures such as grazing in arid and semi-arid areas.
Number of references:
29
Main heading:
Infiltration
Controlled terms:
Arid regions - Chemical properties - Rain - Soil
moisture - Textures - Vegetation
Uncontrolled terms:
Arid and semi-arid areas - Herbaceous vegetation - Infiltration
rate - Physical and chemical properties - Simulated rainfall - Soil crusts - Vegetation
successions - Water infiltration
Classification code:
821 Agricultural Equipment and Methods; Vegetation and Pest
Control - 801 Chemistry - 483.1 Soils and Soil Mechanics - 933 Solid State Physics - 444
Water Resources - 443 Meteorology - 423 Non Mechanical Properties and Tests of Building
Materials - 443.3 Precipitation
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number:
20133016528237
Title:
Single-channel color image encryption using phase retrieve algorithm in fractional
Fourier domain
Authors:
Sui, Liansheng1 ; Xin, Meiting1 ; Tian, Ailing2 ; Jin, Haiyan1/隋连升;辛美婷;田爱玲;
金海燕
Author affiliation:
1
School of Computer Science and Engineering, Xi'An University of Technology, Xi'an 710048,
China
2
Shannxi Province Key Lab of Thin Film Technology and Optical Test, Xi'An Technological
University, Xi'an 710032, China
Corresponding author:
Sui, L. (liudua2010@gmail.com)
Source title:
Optics and Lasers in Engineering
Abbreviated source title:
Opt Lasers Eng
Volume:
51
Issue:
12
Issue date:
December 2013
Publication year:
2013
Pages:
1297-1309
Language:
English
ISSN:
01438166
CODEN:
OLENDN
Document type:
Journal article (JA)
Publisher:
Elsevier Ltd, Langford Lane, Kidlington, Oxford, OX5 1GB, United Kingdom
Abstract:
A single-channel color image encryption is proposed based on a phase retrieve
algorithm and a two-coupled logistic map. Firstly, a gray scale image is constituted with three
channels of the color image, and then permuted by a sequence of chaotic pairs generated by the
two-coupled logistic map. Secondly, the permutation image is decomposed into three new
components, where each component is encoded into a phase-only function in the fractional
Fourier domain with a phase retrieve algorithm that is proposed based on the iterative fractional
Fourier transform. Finally, an interim image is formed by the combination of these phase-only
functions and encrypted into the final gray scale ciphertext with stationary white noise
distribution by using chaotic diffusion, which has camouflage property to some extent. In the
process of encryption and decryption, chaotic permutation and diffusion makes the resultant
image nonlinear and disorder both in spatial domain and frequency domain, and the proposed
phase iterative algorithm has faster convergent speed. Additionally, the encryption scheme
enlarges the key space of the cryptosystem. Simulation results and security analysis verify the
feasibility and effectiveness of this method. © 2013 Elsevier Ltd. All rights reserved.
Number of references:
43
Main heading:
Cryptography
Controlled terms:
Algorithms - Image processing - Iterative methods - White noise
Uncontrolled terms:
Color image encryptions - Encryption and
decryption - Encryption schemes - Fractional Fourier domains - Fractional Fourier
transforms - Iterative algorithm - Noise distribution - Single-channel
Classification code:
921 Mathematics - 741 Light, Optics and Optical Devices - 723
Computer Software, Data Handling and Applications - 921.6 Numerical Methods - 718
Telephone Systems and Related Technologies; Line Communications - 716 Telecommunication;
Radar, Radio and Television - 711 Electromagnetic Waves - 717 Optical Communication
DOI:
10.1016/j.optlaseng.2013.06.005
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number:
20132716470903
Title:
Application of fast S-transform in power quality analysis
Authors:
Zhang, Zhiyu1 ; Man, Weishi1 ; Xi, Lei1 ; Huang, Luyao1/张志禹;;;;
Author affiliation:
1
School of Automation, Xi'an University of Technology, Xi'an 710048, Shaanxi Province, China
Corresponding author:
Zhang, Z. (zhangzhiyu@xaut.edu.cn)
Source title:
Dianwang Jishu/Power System Technology
Abbreviated source title:
Dianwang Jishu
Volume:
37
Issue:
5
Issue date:
May 2013
Publication year:
2013
Pages:
1285-1290
Language:
Chinese
ISSN:
10003673
CODEN:
DIJIES
Document type:
Journal article (JA)
Publisher:
Power System Technology Press, China Electric Power Research Institute,
Qinghe, Bejing, 100085, China
Abstract:
S transform is a time-frequency transform with adaptive resolution, which is
widely used in analyzing the power quality recently. However, the traditional S transform is very
computation-intensive (O(N3) time complexity) and difficult to meet the real-time requirements.
A new fast S transform (FST) algorithm (O(N log N) time complexity) is introduced to analyze the
power quality, which can differentiate the different voltage disturbances in the FST domain, and
denoise the voltage disturbances. Compared with the traditional S-transform in terms of
efficiency, simulation results show that the different voltage disturbances have different
coefficient manifestations in the FST domain, and the original time-domain voltage signal is
recovered after the voltage noise disturbances are suppressed with FST algorithm. The FST
algorithm shows better real-time in view of computational time and memory share.
Number of references:
20
Main heading:
Computational complexity
Controlled terms:
Algorithms - Error detection - Power quality
Uncontrolled terms:
Computational time and memory - De-noising - Fast s
transforms - Power-quality analysis - Real time
requirement - Real-time - Time-frequency transforms - Voltage disturbances
Classification code:
706.1.2 Electric Power Distribution - 721.1 Computer Theory, Includes
Formal Logic, Automata Theory, Switching Theory, Programming Theory - 723 Computer
Software, Data Handling and Applications - 921 Mathematics
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
Copyright © 2013 Elsevier B.V. All rights reserved. SciVerse® is a registered trademark of Elsevier
Properties S.A., used under license.
20130720 新增 20 条
1.
Accession number:
20132816485585
Title:
Modeling soil solute release into runoff and transport with runoff on a loess slope
Authors:
Dong, Wencai1, 2 ; Wang, Quanjiu3, 4/;王全九
Author affiliation:
1
State Key Laboratory of Soil Erosion and Dryland Farming on the Loess Plateau, Institute of
Soil and Water Conservation, Chinese Academy of Sciences, Yangling, Shaanxi 712100, China
2
Univ. of Chinese Academy of Sciences, Beijing 100049, China
3
Institute of Water Resources, Xi'an Univ. of Technology, Xi'an, Shannxi 710048, China
4
State Key Laboratory of Soil Erosion and Dryland Farming on the Loess Plateau, Institute of
Soil and Water Conservation, Chinese Academy of Sciences, No. 26 Xinong Rd., Yangling, Shaanxi
712100, China
Corresponding author:
Wang, Q. (wquanjiu@163.com)
Source title:
Journal of Hydrologic Engineering
Abbreviated source title:
J. Hydrol. Eng.
Volume:
18
Issue:
5
Issue date:
2013
Publication year:
2013
Pages:
527-535
Language:
English
ISSN:
10840699
Document type:
Journal article (JA)
Publisher:
American Society of Civil Engineers (ASCE), 1801 Alexander Graham Bell Drive,
Reston, VA 20191-4400, United States
Abstract:
Rainfall results in the transfer of chemicals from soil to surface runoff. A
physically-based solute transport model was developed for estimating the solute concentration in
runoff originating from the soil surface. The model accounts for the effects of soil infiltration,
raindrops, the water runoff rate, and the return flow, all of which influence the concentration of
the solutes in the runoff. It was assumed that the depth of mixing zone changed with the
varieties of the raindrop hits, return flow, and overland flow. It was also assumed that runoff and
soil in the mixing zone mixed instantaneously and that the solute in the soil beneath the mixing
zone was moved to the mixing zone by diffusion. The mixing zone was included in the model and
was based on the deposited layer or shield concept. To test the model, laboratory experiments
were carried out that used two soil types that were exposed to simulated rainfall. The results
simulated by the model were highly correlated with the experimental data. In the first few
minutes after rainfall began, the solute concentration in the runoff was mainly controlled by the
rainfall rate and solute concentration in the mixing zone; higher solute levels in the mixing zone
resulted in higher solute concentrations in runoff. When the solute concentration in the runoff
stabilized, the solute concentration in the runoff was mainly controlled by the diffusion of solutes
from the soil beneath the mixing zone. The simulated data showed a high level of correlation
with the measured data for both runoff volume and solute concentration in the runoff. This
demonstrates that the model captured the temporal behavior of the runoff and solute transport
in the runoff. © 2013 American Society of Civil Engineers.
Number of references:
50
Main heading:
Runoff
Controlled terms:
Computer simulation - Diffusion - Drops - Mixing - Rain - Soil
testing - Soils - Solute transport
Uncontrolled terms:
Experimental datum - Laboratory experiments - Mixing
zones - Physically based models - Raindrop impact - Simulated rainfall - Solute
concentrations - Solute transport model
Classification code:
443.3 Precipitation - 444.1 Surface Water - 483.1 Soils and Soil
Mechanics - 723.5 Computer Applications - 802.3 Chemical Operations - 931.1 Mechanics
DOI:
10.1061/(ASCE)HE.1943-5584.0000622
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number:
20132816484435
Title:
Study on intelligentized multiple-scheme urban road preferential technology
Authors:
Fan, Cuixiang1 ; Liu, Hui1/;
Author affiliation:
1
Xi'an University of Technology, Xi'an 710082, China
Corresponding author:
Fan, C. (fancuixiang111@sohu.com)
Source title:
Qinghua Daxue Xuebao/Journal of Tsinghua University
Abbreviated source title:
Qinghua Daxue Xuebao
Volume:
52
Issue:
SUPPL.1
Issue date:
October 2012
Publication year:
2012
Pages:
137-140
Language:
Chinese
ISSN:
10000054
CODEN:
QDXKE8
Document type:
Journal article (JA)
Publisher:
Press of Tsinghua University, 15 Xueyuanlu, Beijing, 100083, China
Abstract:
The road traffic capacity and utilization efficiency will be significantly raised with
vehicle timetables being reduced if dynamic optimization of full traffic paths is realized based on
real-time traffic information, with reasonable avoidance of congested roads, reduction of red
light waiting time, and the short path selection. An intelligentized multiple-scheme preferential
technology for urban roads was developed using the state space searching method to provide
different intelligentized urban road selection schemes for different requirements under real-time
traffic conditions, with a primary algorithm designed for each scheme. The results show the
feasibility of this technology.
Number of references:
8
Main heading:
Roads and streets
Controlled terms:
Street traffic control
Uncontrolled terms:
Dynamic navigations - Dynamic optimization - Optimal
paths - Real-time traffic conditions - Real-time traffic information - State space
searching - Urban road - Utilization efficiency
Classification code:
406.2 Roads and Streets
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number:
20132716471648
Title:
Study on optimization of thermal key points for machine tools based on Fisher
optimal segmentation method
Authors:
Gao, Feng1, 2 ; Liu, Jiang1 ; Yang, Xingang1 ; Li, Yan1 ; Yang, Yan1/高峰;刘江;杨新
刚;李艳;杨艳
Author affiliation:
1
School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology,
Xi'an 710048, China
2
School of Mechanical Engineering, Shaanxi University of Technology, Hanzhong 723003,
China
Corresponding author:
Gao, F. (gf2713@xaut.edu.cn)
Source title:
Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument
Abbreviated source title:
Yi Qi Yi Biao Xue Bao
Volume:
34
Issue:
5
Issue date:
May 2013
Publication year:
2013
Pages:
1070-1075
Language:
Chinese
ISSN:
02543087
CODEN:
YYXUDY
Document type:
Journal article (JA)
Publisher:
Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China
Abstract:
When establishing thermal error model using temperature measuring points, the
selection of temperature measuring points has a great influence on the accuracy of thermal error
modeling. A novel optimal segmentation approach-Fisher optimal segmentation method is
presented. The experiment acquired raw data are taken as the analysis data, the diameters of the
classes are calculated, and the error functions of the classes are compared. The measuring point
variables for machine tool are classified; the correlation coefficients between temperature
variables and thermal errors of the classes are calculated; the thermal key points used for
thermal error modeling are obtained; and thereby the optimization of temperature measuring
points is achieved. Finally, the thermal error model is established with multiple linear regression
analysis method from the optimized thermal key points. The established thermal error model
was compared with that built from the temperature test points selected using the variable
grouping optimization method, and comparison results indicate that the Fisher optimal
segmentation method is feasible and has strong practicability.
Number of references:
11
Main heading:
Optimization
Controlled terms:
Linear regression - Machine tools - Temperature measurement
Uncontrolled terms:
Correlation coefficient - Error
function - Keypoints - Measuring points - Optimal segmentation
Classification code:
603.1 Machine Tools, General - 921.5 Optimization
Techniques - 922.2 Mathematical Statistics - 944.6 Temperature Measurements
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number:
20132716471692
Title:
Experimental research on integrative bipolar charged agglomerator
Authors:
He, Jian1 ; Liu, Daoqing2 ; Xu, Guosheng1/何剑;刘道清;徐国胜
Author affiliation:
1
Northwest Key Laboratory of Water Resource and Environment Ecology of Ministry of
Education, Xi'an University of Technology, Xi'an 710048, Shaanxi Province, China
2
Research and Development Center of Baoshan Iron and Steel Co., Ltd., Baoshan District,
Shanghai 201900, China
Corresponding author:
He, J. (hejian2410@163.com)
Source title:
Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of
Electrical Engineering
Abbreviated source title:
Zhongguo Dianji Gongcheng Xuebao
Volume:
33
Issue:
17
Issue date:
June 15, 2013
Publication year:
2013
Pages:
45-50
Language:
Chinese
ISSN:
02588013
CODEN:
ZDGXER
Document type:
Journal article (JA)
Publisher:
Chinese Society of Electrical Engineering, Qinghe, Beijing, 100085, China
Abstract:
An integrated method and device of fine particle bipolar charging and
agglomeration was presented, in which particles charged and agglomerated simultaneously with
a set of fluidic agglomeration unit at the end. A comprehensive experimental system was
constructed by using fly ash as test dust. Particle size distribution before and after integrative
bipolar charged agglomerator (IBCA) was analyzed by an aerodynamic particle sizer (APS) and
emission of electrostatic precipitator downstream by an on-line dust concentration monitor. The
results show that agglomeration eigenvalue increase with the rising of operating voltage of
positive charged channels but with small changes of negative charged channels. Agglomeration
performance is negatively related to dust concentration and the optimum airflow velocity of
agglomeration electric field is 7.8 m/s. The maximum agglomeration eigenvalue can reach above
1.5, while emission of electrostatic precipitator downstream can be reduced by 69.7%. It proves
that IBCA has excellent agglomeration performance and is effective in fine particles removal. ©
2013 Chinese Society for Electrical Engineering.
Number of references:
22
Main heading:
Agglomeration
Controlled terms:
Air - Dust - Eigenvalues and eigenfunctions - Electric
fields - Electrostatic precipitators - Fly ash - Particle size analysis
Uncontrolled terms:
Aerodynamic particle sizer - Collection efficiency - Dust
concentration monitor - Eigen-value - Experimental research - Experimental
system - Fine particles - Fine particles removal
Classification code:
951 Materials Science - 921.1 Algebra - 804 Chemical Products
Generally - 802.3 Chemical Operations - 701.1 Electricity: Basic Concepts and
Phenomena - 451.2 Air Pollution Control - 451.1 Air Pollution Sources
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number:
20132816488823
Title:
Adaptive outlier-tolerant predictors of controlled autoregressive process
Authors:
Hu, Shao Lin1 ; Yang, Yue2 ; Li, Meng1/胡绍林;;;
Author affiliation:
1
Automation and Information Engineering of Xi'an University of Technology, 710048, China
2
College of Software, Sichuan University, Chengdu, 610065, China
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
321-324
Monograph title:
Mechatronics and Industrial Informatics
Issue date:
2013
Publication year:
2013
Pages:
829-832
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037856949
Document type:
Conference article (CA)
Conference name:
2013 International Conference on Mechatronics and Industrial
Informatics, ICMII 2013
Conference date:
March 13, 2013 - March 14, 2013
Conference location:
Guangzhou, China
Conference code:
97672
Sponsor:
Korea Maritime University; Hong Kong Industrial Technology Research Centre
Publisher:
Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635,
Switzerland
Abstract:
The controlled autoregressive model is widely used to describe a dynamic process.
In this paper, a series of new algorithms are proposed to estimate the model's coefficients and to
predict future change of the process. On the one hand, it is can be proved that these new
algorithms are outlier-tolerant in the case that there are outliers in sampling series. On the one
hand, these new algorithms are near to the optimal estimators and predictors separately in
normal case. © (2013) Trans Tech Publications, Switzerland.
Number of references:
9
Main heading:
Process control
Controlled terms:
Algorithms - Diagnosis - Information science - Random
processes - Statistics
Uncontrolled terms:
Auto regressive models - Auto regressive process - Dynamic
process - Optimal estimator
Classification code:
922.2 Mathematical Statistics - 922.1 Probability Theory - 921
Mathematics - 903 Information Science - 731 Automatic Control Principles and
Applications - 723 Computer Software, Data Handling and Applications - 461.6 Medicine and
Pharmacology
DOI:
10.4028/www.scientific.net/AMM.321-324.829
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number:
20132816491376
Title:
Numerical investigating nonlinear dynamic responses to rotating deep-hole drilling
shaft with multi-span intermediate supports
Authors:
Kong, Lingfei1 ; Li, Yan1 ; Zhao, Zhiyuan1/孔令飞;李言;赵智渊
Author affiliation:
1
School of Mechanical and Instrumental Engineering, Xi'An University of Technology, Xi'an
710048, Shaanxi, China
Corresponding author:
Kong, L. (lingfeikong@xaut.edu.cn)
Source title:
International Journal of Non-Linear Mechanics
Abbreviated source title:
Int J Non Linear Mech
Volume:
55
Issue date:
2013
Publication year:
2013
Pages:
170-179
Language:
English
ISSN:
00207462
CODEN:
IJNMAG
Document type:
Journal article (JA)
Publisher:
Elsevier Ltd, Langford Lane, Kidlington, Oxford, OX5 1GB, United Kingdom
Abstract:
An approach is presented to study the nonlinear dynamic responses to rotating
drill shaft with multi-span supports. Based on the finite element method, the drilling shaft is
modeled as lots of 2-node Timoshenko shaft element model with free-interface that can take the
effect of inertia and shear into consideration. In these cases, the governing equations of drilling
shaft system consist of the coupled linear and nonlinear components. According to the feature of
such systems, a modified transformation is introduced, by means of which the linear degrees of
freedom of the drilling shaft system are reduced significantly whereas nonlinear degrees of
freedom of the system are retained in the physical space. A modified Newton shooting method is
used to obtain the periodic trajectories of the dynamic system. The advantage of this method has
reduced much of the computational cost in the past, and the hydrodynamic forces of cutting fluid,
cutting forces and unbalance forces can easily be added to the system equations. Further, the
numerical schemes of this study are applied to a large-scale deep-hole drill machine with two
intermediate supports. The periodic dynamic behaviors of the drilling shaft system and the region
of unstable rotation are investigated numerically, whereby revealing some interesting
phenomena. © 2013 Elsevier Ltd.
Number of references:
30
Main heading:
Mathematical transformations
Controlled terms:
Cutting fluids - Drills - Dynamic response - Dynamics - Finite
element method - Linear transformations - Nonlinear equations - Offshore
pipelines - Shear flow
Uncontrolled terms:
Deep hole drilling - Drilling shaft - Governing
equations - Hydrodynamic forces - Intermediate support - Modal reduction - Nonlinear
components - Periodic trajectories
Classification code:
931.1 Mechanics - 921 Mathematics - 619.1 Pipe, Piping and
Pipelines - 607.1 Lubricants - 603.2 Machine Tool Accessories - 421 Strength of Building
Materials; Mechanical Properties - 408.1 Structural Design, General
DOI:
10.1016/j.ijnonlinmec.2013.06.004
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number:
20132816484494
Title:
Numerical experiment research of microstructure and loading rate affect on
concrete compressive property
Authors:
Lei, Guangyu1 ; Dang, Faning1 ; Li, Qian1 ; Pan, Feng1/雷光宇;党发宁;李倩;;
Author affiliation:
1
Institute of Geotechnical Engineering, Xi'an University of Technology, Xi'an 710048, China
Corresponding author:
Lei, G. (lgy1984@stu.xaut.edu.cn)
Source title:
Tumu Gongcheng Xuebao/China Civil Engineering Journal
Abbreviated source title:
Tumu Gongcheng Xuebao
Volume:
46
Issue:
SUPPL.2
Issue date:
May 2013
Publication year:
2013
Pages:
79-85
Language:
Chinese
ISSN:
1000131X
Document type:
Journal article (JA)
Publisher:
Editorial Office of China Civil Engineering Journal, 9 Sanlihelu, Beijing, 100835,
China
Abstract:
In order to study the mechanical behavior of concrete material under the dynamic
loading, through established the microscopic concrete randomly aggregate model, the
load-displacement curves and damage failure diagram of the specimen which under dynamic
load were obtained. A Contrastive study of numerical simulation and CT real-time scanning tests.
The peak intensity of the load-displacement curves as the specimen failure strength was obtained.
Four specimens of the same size, which have the different aggregate position, were carried out
five different rates. The results showed that when the loading rate improving, the concrete
strength was also improving. Loading rate increased to 3 times, at the same time, the peak
intensity increased by about 21%.They were not the same growth of proportion. Meanwhile,
found that different aggregate position under the condition of the same mix proportion had a
certain effect on concrete strength. According to apply different inertial force and elastic
parameters on the specimen, obtained the relationship between the specimen and them.
Number of references:
14
Main heading:
Aggregates
Controlled terms:
Concretes - Dynamic loads - Load testing
Uncontrolled terms:
Dynamic strength - Load-displacement curve - Loading
rate - Peak point - Random aggregate model
Classification code:
406 Highway Engineering - 408.1 Structural Design, General - 412
Concrete - 483.1 Soils and Soil Mechanics
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number:
20132816491412
Title:
Orthogonal spline collocation methods for the subdiffusion equation
Authors:
Li, Can1, 2 ; Zhao, Tinggang1 ; Deng, Weihua1 ; Wu, Yujiang1/;;;;
Author affiliation:
1
School of Mathematics and Statistics, Lanzhou University, Lanzhou, Gansu 730000, China
2
Department of Applied Mathematics, School of Science, Xi'An University of Technology, Xi'an,
Shaanxi 710054, China
Corresponding author:
Deng, W. (dengwh@lzu.edu.cn)
Source title:
Journal of Computational and Applied Mathematics
Abbreviated source title:
J. Comput. Appl. Math.
Volume:
255
Issue date:
2014
Publication year:
2014
Pages:
517-528
Language:
English
ISSN:
03770427
Document type:
Journal article (JA)
Publisher:
Elsevier, P.O. Box 211, Amsterdam, 1000 AE, Netherlands
Abstract:
We develop two kinds of numerical schemes to efficiently solve the subdiffusion
equation, which is used to describe anomalous subdiffusive transport processes. The time
fractional derivative is first discretized by L1-approximation and the Gru¨nwald-Letnikov
approximation, respectively. Then we use the orthogonal spline collocation method to
approximate the two semi-discretized subdiffusion equations. The stability and convergence of
time semi-discretization and full discretization schemes are both established strictly for the two
schemes. Both of them are unconditionally stable. Numerically the convergent orders in space
(including the solution and its first derivative) are four for the Hermite cubic spline approximation,
and theoretically we get that at least the solution itself has a fourth order convergent rate.
Extensive numerical results are presented to show the convergent order and robustness of the
numerical schemes. © 2013 Elsevier B.V. All rights reserved.
Number of references:
31
Main heading:
Partial differential equations
Controlled terms:
Convergence of numerical methods - Polynomials
Uncontrolled terms:
Convergence - Fractional derivatives - Full
discretization - Hermite cubic splines - Orthogonal splines - Stability and
convergence - Subdiffusion equations - Unconditionally stable
Classification code:
921 Mathematics
DOI:
10.1016/j.cam.2013.05.022
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number:
20132716471653
Title:
Image matching based on improved SIFT algorithm
Authors:
Liu, Jia1, 2 ; Fu, Weiping1 ; Wang, Wen1 ; Li, Na1/刘佳;傅卫平;王雯;李娜
Author affiliation:
1
School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology,
Xi'an 710048, China
2
School of Science, Xi'an University of Science and Technology, Xi'an 710054, China
Corresponding author:
Liu, J. (liujia.168@163.com)
Source title:
Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument
Abbreviated source title:
Yi Qi Yi Biao Xue Bao
Volume:
34
Issue:
5
Issue date:
May 2013
Publication year:
2013
Pages:
1107-1112
Language:
Chinese
ISSN:
02543087
CODEN:
YYXUDY
Document type:
Journal article (JA)
Publisher:
Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China
Abstract:
In order to further improve the robustness and accuracy of SIFT matching
algorithm, the SIFT algorithm is improved in the following several aspects. Multi-resolution
wavelet transform is performed on the images, the image approximation components that are
reconstructed-low-frequency information is adopted to match the images; and a "nested
box"-shaped double square neighborhood window is used to divide the neighborhood of a
feature point into four areas and construct a 32 dimension feature descriptor vector. Euclidean
distance is used to preliminarily ensure the matching points, and then integral image is used to
eliminate the mismatching points caused by the space similarity of the feature points, so that the
matching accuracy is improved. Experiments show that the proposed algorithm significantly
improves matching accuracy and matching time; especially when the image has more local
similar characteristics, all the matching points and the matching correct rate increase.
Number of references:
24
Main heading:
Image matching
Controlled terms:
Algorithms - Wavelet transforms
Uncontrolled terms:
Euclidean distance - Feature descriptors - Integral
images - Matching algorithm - Matching points - Multi-resolution wavelet
transform - Rate increase - SIFT algorithms
Classification code:
723 Computer Software, Data Handling and Applications - 741 Light,
Optics and Optical Devices - 921 Mathematics - 921.3 Mathematical Transformations
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
10.
Accession number:
20132816477911
Title:
Modeling the impact of subsurface drainage system layout on field hydrology in
theYellow River Delta
Authors:
Liu, Wenlong1 ; Luo, Wan1 ; Jia, Zhonghua1 ; Pan, Yanxin1 ; Yang, Yuzhen2 ; Bu,
Fanmin2/刘文龙;罗纨;贾忠华;;;;
Author affiliation:
1
Northwest Key Laboratories of Water Resources and Environment Ecology, Xi'an University
of Technology, China
2
Yellow River Delta Protection and Research Center, China
Source title:
WIT Transactions on Engineering Sciences
Abbreviated source title:
WIT Trans. Eng. Sci.
Volume:
80
Monograph title:
Advances in Industrial Engineering, Information and Water Resources
Issue date:
2013
Publication year:
2013
Pages:
617-627
Language:
English
ISSN:
17433533
ISBN-13:
9781845647483
Document type:
Conference article (CA)
Publisher:
WITPress, Ashurst Lodge, Ashurst, Southampton, SO40 7AA, United Kingdom
Abstract:
Soil salinization is a potential threat to agricultural production in the Yellow River
Delta owing to the flat topography, shallow water table depth and high salinity of groundwater in
the area. Thus building artificial drainage systems is the key to ensuring production of grain and
cotton in the Delta area. Open ditches have to be constructed very wide to maintain stability of
their side slopes that are formed with the loose structured sandy soils in the locality. In order to
control ground water level and prevent water logging more efficiently, subsurface drainage has
been loudly advocated in the Delta area in recent years.In this paper, we studied the impact of
the layout of subsurface drainage systems on field hydrology using the DRAINMOD model; we
also discussed the potential influence of subsurface drainage intensity on the ecological
environment. The modeling results showed that the shallow drainage layout perform better for
water logging prevention, and it has advantages in reducing non-point source pollution and the
sea water intrusion threat; under good surface drainage conditions, shallow drainage systems can
rapidly lower the water table and reduce water logging time by 73% in wet years. The simulation
results also showed that reducing drainage depth from 2.0 m to 1.2 m may reduce subsurface
drainage discharge by 24%. Because the shallow drainage system is associated with higher cost,
its adoption has to be evaluated with other economic and ecological factors. © 2012 WIT Press.
Number of references:
17
Main heading:
Drainage
Controlled terms:
Coastal zones - Ecology - Groundwater - Groundwater
flow - Hydrology - River pollution - Water levels - Water resources
Uncontrolled terms:
DRAINMOD - Field hydrology - Subsurface drainages - Water
logging - Yellow River delta
Classification code:
502 Mines and Quarry Equipment and Operations - 471 Marine
Science and Oceanography - 454.3 Ecology and Ecosystems - 453 Water Pollution - 614.2
Steam Power Plant Equipment and Operation - 444.2 Groundwater - 442 Flood Control; Land
Reclamation - 406 Highway Engineering - 401 Bridges and Tunnels - 444 Water Resources
DOI:
10.2495/AIE120671
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
11.
Accession number:
20132716474786
Title:
Feature extraction algorithm for palm bio-impedance spectroscopy based on
wavelet transform
Authors:
Lü, Lin-Tao1 ; Zhou, Xin-Jun1 ; Yang, Yu-Xiang1 ; Tan, Fang1/吕林涛;周新君;杨宇
祥;谭芳
Author affiliation:
1
College of Computer Science and Engineering, Xi'an University of Technology, 710048, China
Corresponding author:
Lü, L.-T. (lvlintao@xaut.edu.cn)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
327
Monograph title:
Advanced Research on Materials, Applied Mechanics and Design Science
Issue date:
2013
Publication year:
2013
Pages:
1576-1579
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037857175
Document type:
Conference article (CA)
Conference name:
2nd International Conference on Intelligent Materials, Applied
Mechanics and Design Science, IMAMD 2013
Conference date:
April 13, 2013 - April 14, 2013
Conference location:
Guangzhou, China
Conference code:
97684
Sponsor:
International Science and Education Researcher Association, China; Beijing Gireida
Education Research Center; VIP-Information Conference Center, China
Publisher:
Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635,
Switzerland
Abstract:
Based on the palm bio-impedance spectroscopy (BIS) features, this paper suggests
a kind of feature extraction algorithm suitable for the palm BIS. The palm BIS under the
multi-frequency is measured, a wavelet transform with the characteristics of multi-resolution
analysis is selected; each set of palm BIS data is discomposed; the feature subset of wavelet
coefficients with the different dimensions is extracted;and then the support vector machine is
used to carry out the matching judgment. The testing results indicate that the correct rate of the
palm BIS feature extraction algorithm based on the wavelet transform is 91%, and its error rate is
9%,whereby testifying that this algorithm is of an excellent robustness. © (2013) Trans Tech
Publications, Switzerland.
Number of references:
4
Main heading:
Wavelet transforms
Controlled terms:
Algorithms - Design - Feature extraction - Spectroscopy
Uncontrolled terms:
A-wavelet transform - Bio-Impedance spectroscopies - Error
rate - Feature extraction algorithms - Feature subset - Multi frequency - Wavelet
coefficients
Classification code:
408 Structural Design - 716 Telecommunication; Radar, Radio and
Television - 723 Computer Software, Data Handling and Applications - 801 Chemistry - 921
Mathematics - 921.3 Mathematical Transformations
DOI:
10.4028/www.scientific.net/AMM.325-326.1576
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
12.
Accession number:
20133316609711
Title:
Self-assembled poly(N-methylaniline)-lignosulfonate spheres: From silver-ion
adsorbent to antimicrobial material
Authors:
Lü, Qiu-Feng1 ; Zhang, Jia-Yin1 ; Yang, Jun1 ; He, Zhi-Wei1 ; Fang, Chang-Qing2 ; Lin,
Qilang1/;;;;方长青;;;
Author affiliation:
1
College of Materials Science and Engineering, Fuzhou University, 2 Xueyuan Road, Fuzhou
350116, China
2
College of Printing and Packing Engineering, Xi'An University of Technology, 5 Jinhua South
Road, Xi'an 710048, China
Corresponding author:
Lü, Q.-F. (qiufenglv@163.com)
Source title:
Chemistry - A European Journal
Abbreviated source title:
Chem. Eur. J.
Volume:
19
Issue:
33
Issue date:
August 12, 2013
Publication year:
2013
Pages:
10935-10944
Language:
English
ISSN:
09476539
E-ISSN:
15213765
CODEN:
CEUJED
Document type:
Journal article (JA)
Publisher:
Wiley-VCH Verlag, P.O. Box 101161, Weinheim, D-69451, Germany
Abstract:
Self-assembled poly(N-methylaniline)-lignosulfonate (PNMA-LS) composite
spheres with reactive silver-ion adsorbability were prepared from N-methylaniline by using
lignosulfonate (LS) as a dispersant. The results show that the PNMA-LS composite consisted of
spheres with good size distribution and an average diameter of 1.03-1.27 μm, and the spheres
were assembled by their final nanofibers with an average diameter of 19-34 nm. The PNMA-LS
composite spheres exhibit excellent silver-ion adsorption; the maximum adsorption capacity of
silver ions is up to 2.16 g g-1 at an adsorption temperature of 308 K. TEM and wide-angle X-ray
results of the PNMA-LS composite spheres after absorption of silver ions show that silver ions are
reduced to silver nanoparticles with a mean diameter of about 11.2 nm through a redox reaction
between the PNMA-LS composite and the silver ions. The main adsorption mechanism between
the PNMA-LS composite and the silver ions is chelation and redox adsorption. In particular, a
ternary PNMA-LS-Ag composite achieved by using the reducing reaction between PNMA-LS
composite spheres and silver ions can be used as an antibacterial material with high bactericidal
rate of 99.95 and 99.99 % for Escherichia coli and Staphylococcus aureus cells, respectively. ©
2013 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
Number of references:
57
Main heading:
Spheres
Controlled terms:
Adsorption - Bacteria - Escherichia coli - Metal
ions - Polymerization - Redox reactions - Self assembly - Silver
Uncontrolled terms:
Adsorption capacities - Adsorption mechanism - Adsorption
temperature - Antibacterial materials - Antimicrobial materials - Lignosulfonates - Silver
nanoparticles - Staphylococcus aureus
Classification code:
951 Materials Science - 815.2 Polymerization - 802.3 Chemical
Operations - 802.2 Chemical Reactions - 801.2 Biochemistry - 801 Chemistry - 631 Fluid
Flow - 547.1 Precious Metals - 533 Ore Treatment and Metal Refining
DOI:
10.1002/chem.201204113
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
13.
Accession number:
20132716472288
Title:
Rating the customer requirements based on DEMATEL and entropy
Authors:
Mingshun, Yang1 ; Ting, Yu2 ; Yanjie, Liang2 ; Yubo, Zhang2/杨明顺;;;;
Author affiliation:
1
Department of Mechanical, Manufacturing and Automation, School of Mechanical and
Precision Instrument Engineering, Xi'an University of Technology (XAUT), Xi'an, China
2
School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology
(XAUT), Xi'an, China
Corresponding author:
Mingshun, Y. (yangmingshun@xaut.edu.cn)
Source title:
International Journal of Online Engineering
Abbreviated source title:
Int. J. Online Eng.
Volume:
9
Issue:
SPL.ISSUE4
Issue date:
2013
Publication year:
2013
Pages:
15-19
Language:
English
ISSN:
18681646
E-ISSN:
18612121
Document type:
Journal article (JA)
Publisher:
Kassel University Press GmbH, Diagonale 10, Kassel, 34127, Germany
Abstract:
In the configuration procedure of QFD "Quality Function Deployment", the
importance rating of customer requirements as one of the important input parameters is very
significant to the determination of the technical characteristics and even to the optimum decision
to the whole quality of house as well as the following step of allocation decision-making. In this
paper, firstly the drawbacks of the existing methods of determining the importance rating of
customer requirements are analyzed. Then with the influence of customer requirement
interdependence and market competitive evaluations sufficiently considered, DEMATEL is
introduced to deal with self-correlations between customer requirements and Entropy is used to
dispose the market competitive evaluations to modify the fundamental importance ratings of the
customer requirements, thus a more objective comprehensive fundamental importance rating of
the customer requirements can be gained. Finally, one example is given to verify the
effectiveness of the presented method.
Number of references:
9
Main heading:
Sales
Controlled terms:
Commerce - Entropy - Quality function deployment - Rating
Uncontrolled terms:
Customer requirements - DEMATEL - Importance
rating - Input parameter - Optimum decision
Classification code:
641.1 Thermodynamics - 902.2 Codes and Standards - 911.4
Marketing - 913.3 Quality Assurance and Control
DOI:
10.3991/ijoe.v9iS4.2590
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
14.
Accession number:
20132716474189
Title:
Object shape classification and scene shape representation for three-dimensional
laser scanned outdoor data
Authors:
Ning, Xiaojuan1, 2 ; Wang, Yinghui1 ; Zhang, Xiaopeng2/宁小娟;王映辉;张晓鹏
Author affiliation:
1
Xi'an University of Technology, Department of Computer Science Engineering, Xi'an, China
2
CAS Institute of Automation, National Laboratory of Pattern Recognition, Beijing, China
Source title:
Optical Engineering
Abbreviated source title:
Opt Eng
Volume:
52
Issue:
2
Issue date:
2013
Publication year:
2013
Article number:
024301
Language:
English
ISSN:
00913286
E-ISSN:
15602303
CODEN:
OPEGAR
Document type:
Journal article (JA)
Publisher:
SPIE, P.O. Box 10, Bellingham, WA 98227-0010, United States
Abstract:
Shape analysis of a three-dimensional (3-D) scene is an important issue and could
be widely used for various applications: city planning, robot navigation, virtual tourism, etc. We
introduce an approach for understanding the primitive shape of the scene to reveal the semantic
scene shape structure and represent the scene using shape elements. The scene objects are
labeled and recognized using the geometric and semantic features for each cluster, which is
based on the knowledge of scene. Furthermore, the object in scene with a different primitive
shape could also be classified and fitted using the Gaussian map of the segmented scene. We
demonstrate the presented approach on several complex scenes from laser scanning. According
to the experimental result, the proposed method can accurately represent the geometric
structure of the 3-D scene. © 2013 Society of Photo-Optical Instrumentation Engineers (SPIE).
Number of references:
17
Main heading:
Three dimensional
Controlled terms:
Semantics
Uncontrolled terms:
Gaussian map - Point cloud data - Primitive shape - Scene
representation - Shape classification - Terrestrial laser scanners
Classification code:
902.1 Engineering Graphics - 903.2 Information Dissemination
DOI:
10.1117/1.OE.52.2.024301
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
15.
Accession number:
20132816479994
Title:
Effects of trigger laser pulse width on the jitter time of GaAs photoconductive
semiconductor switch
Authors:
Shi, Wei1 ; Gui, Huaimeng1 ; Zhang, Lin1 ; Ma, Cheng1 ; Li, Mengxia1 ; Xu, Ming1 ;
Wang, Luyi1/施卫;;;;;;
Author affiliation:
1
Applied Physics Department, Xi'An University of Technology, Xi'an 710048, China
Corresponding author:
Shi, W. (swshi@mail.xaut.edu.cn)
Source title:
Optics Letters
Abbreviated source title:
Opt. Lett.
Volume:
38
Issue:
13
Issue date:
July 1, 2013
Publication year:
2013
Pages:
2330-2332
Language:
English
ISSN:
01469592
E-ISSN:
15394794
CODEN:
OPLEDP
Document type:
Journal article (JA)
Publisher:
Optical Society of America, 2010 Massachusetts Avenue NW, Washington, DC
20036-1023, United States
Abstract:
The effects of trigger laser pulse width on the jitter time of a GaAs
photoconductive semiconductor switch (PCSS) is investigated in the experiment. The laser is split
into two optical beams by a cross grating to excite two 3 mm gap GaAs PCSSs in parallel at the
same time. This work reveals that the jitter time of the GaAs PCSS is reduced as the trigger laser
pulse width decreases. Our results overcome a significant obstacle that hinders the testing and
theory of GaAs PCSSs in high-time-precision synchronous control. © 2013 Optical Society of
America.
Number of references:
11
Main heading:
Gallium arsenide
Controlled terms:
Jitter - Laser pulses - Photoconductive switches - Semiconducting
gallium
Uncontrolled terms:
Cross grating - GaAs - Jitter-time - Laser pulse
width - Optical beams - Photoconductive semiconductor switches - Synchronous control
Classification code:
804 Chemical Products Generally - 744.1 Lasers, General - 718
Telephone Systems and Related Technologies; Line Communications - 717 Optical
Communication - 716 Telecommunication; Radar, Radio and Television - 714.2
Semiconductor Devices and Integrated Circuits - 712.1.1 Single Element Semiconducting
Materials
DOI:
10.1364/OL.38.002330
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
16.
Accession number:
20132816484537
Title:
Seismic energy dissipation control research of the multi-ribbed slab structure using
low yield point steel
Authors:
Tian, Jie1 ; Yan, Zhichao1 ; Lu, Junlong1/田洁;;
Author affiliation:
1
Xi'an University of Technology, Xi'an 710048, China
Corresponding author:
Tian, J. (tianjie@xaut.edu.cn)
Source title:
Tumu Gongcheng Xuebao/China Civil Engineering Journal
Abbreviated source title:
Tumu Gongcheng Xuebao
Volume:
46
Issue:
SUPPL.1
Issue date:
April 2013
Publication year:
2013
Pages:
32-37
Language:
Chinese
ISSN:
1000131X
Document type:
Journal article (JA)
Publisher:
Editorial Office of China Civil Engineering Journal, 9 Sanlihelu, Beijing, 100835,
China
Abstract:
According to the basic components and construct characteristic of the
multi-ribbed slab structure (MRSS), a new kind of the seismic mitigation multi-ribbed composite
wall slab was provided by locating low yield point steel panels within concrete sash. Based on an
retrogressive three-linear resilience model using degrading control parameters of stiffness and
strength degradation and slip pinching for representing reinforced concrete members and a
smooth hysteretic model for representing infill silicate blocks as well as infill steel panels
respectively, the nonlinear dynamic time-history analysis of the MRSS energy dissipation control
systems under horizontal earthquakes has been carried out. The earthquake responses of the
systems were calculated. The seismic mitigation effect and adaptability of the low yield point
steel panels for MRSS were discussed. The calculating results show that the low yield point steel
panels have obvious seismic mitigation effects, which seismic damping rate is 15%~30% under
the seismic frequent intensity, and is 30%~70% under the seismic fortification intensity and the
seismic seldom intensity for 8 degree seismic region according to China Code for Seismic Design
of Buildings, so that a simple and effective seismic energy dissipation measures is provided for
the multi-ribbed slab structure.
Number of references:
10
Main heading:
Earthquakes
Controlled terms:
Concretes - Control system analysis - Energy
dissipation - Reinforced concrete - Seismic design - Silicates - Stiffness
Uncontrolled terms:
Earthquake response analysis - Low-yield point
steels - Multi-ribbed composite wall - Multi-ribbed slab structure - Seismic energy
dissipation
Classification code:
812 Ceramics, Refractories and Glass - 731.1 Control
Systems - 525.4 Energy Losses (industrial and residential) - 484 Seismology - 951 Materials
Science - 422 Strength of Building Materials; Test Equipment and Methods - 414 Masonry
Materials - 412 Concrete - 408 Structural Design - 421 Strength of Building Materials;
Mechanical Properties
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
17.
Accession number:
20132816483955
Title:
Effect of extremely low frequency high-voltage pulsed electric field on ultra-weak
luminescence of corns during germination
Authors:
Xi, Gang1 ; Liu, Kai1 ; Yang, Yun-Jing2 ; Gao, Yu1/习岗;刘锴;杨运经;高宇
Author affiliation:
1
Department of Applied Physics, Institute of Science, Xi'an University of Technology, Xi'an
710048, China
2
Department of Applied Physics, Northwest Agriculture and Forestry University, Yangling,
Shaanxi 712100, China
Corresponding author:
Xi, G. (xig@xaut.edu.cn)
Source title:
Guangzi Xuebao/Acta Photonica Sinica
Abbreviated source title:
Guangzi Xuebao
Volume:
42
Issue:
6
Issue date:
June 2013
Publication year:
2013
Pages:
705-709
Language:
Chinese
ISSN:
10044213
CODEN:
GUXUED
Document type:
Journal article (JA)
Publisher:
Chinese Optical Society, P.O. Box 80, Xi'an, 710068, China
Abstract:
Biological ultra-weak luminescence is an electromagnetic signal from cells, which
plays an important role in revealing the mechanism of electromagnetic biological effects. In order
to study the biological effects and mechanism of extremely low frequency pulsed electric field, 1
Hz extremely low frequency high-voltage pulsed electric field based on the potential fluctuation
frequency of corn cells was used to treat the corns during germination. The results showed that
the germination process of corns was accelerated obviously and both the shoot length and root
length of germinating corns were significantly longer than the control. Through the measurement
and analysis of spontaneous luminescence and delayed luminescence on corns during
germination, it was found that the spontaneous luminescence and delayed luminescence integral
intensity of germinating corn were significantly increased under the action of 1 Hz extremely low
frequency high-voltage pulsed electric field, which indicated that this specific pulsed electric field
promoted the DNA synthesis and cell metabolism of the corns during germination. The coupled
resonance of pulsed electric field and cell electric field in corn seeds may be the cause of
biological effects of the extremely low frequency high-voltage pulsed electric field.
Number of references:
26
Main heading:
Luminescence
Controlled terms:
Cells - Cultivation - Cytology - Electric fields - Electromagnetism
Uncontrolled terms:
Cell potential - Corn germination - Electromagnetic
signals - Extremely low frequencies - High-voltage pulsed electric field - Measurement and
analysis - Pulsed electric field - Ultra-weak
Classification code:
461.2 Biological Materials and Tissue Engineering - 701 Electricity and
Magnetism - 701.1 Electricity: Basic Concepts and Phenomena - 741.1 Light/Optics - 821.3
Agricultural Methods
DOI:
10.3788/gzxb20134206.0705
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
18.
Accession number:
20132816483732
Title:
Effect of SiC content on the erosion and wear resistance of epoxy/SiC composite
Authors:
Xing, Zhi-Guo1 ; Zhou, Xin-Yuan1 ; Lyu, Zhen-Lin2 ; Zhou, Yong-Xin2/邢志国;周新
远; 吕振林;周永欣
Author affiliation:
1
National Key Laboratory for Remanufacturing, Academy of Armored Forces Engineering,
Beijing 100072, China
2
School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048,
China
Corresponding author:
Xing, Z.-G. (xingzg2011@163.com)
Source title:
Cailiao Gongcheng/Journal of Materials Engineering
Abbreviated source title:
Cailiao Gongcheng
Issue:
6
Issue date:
June 2013
Publication year:
2013
Pages:
67-71
Language:
Chinese
ISSN:
10014381
CODEN:
CAGOEW
Document type:
Journal article (JA)
Publisher:
Beijing Institute of Aeronautical Materials (BIAM), P.O. Box 81, Beijing,
100095, China
Abstract:
In order to improve the erosion and wear resistance of large flow parts in factories
and mines, the epoxy/SiC composite coating was prepared using SiC particle and epoxy resin. The
composite coating with excellent erosion and wear resistance can be solidified quickly and coated
conveniently. The article studied the effect of SiC particle content on the erosion and wear
resistance of epoxy/SiC composite. The erosion and wear test was carried out on a self-made
erosion and wear tester. The erosion and wear morphologies of the composite were observed
using SEM. The results showed that different SiC particle content in the composite could change
the erosion and wear resistance. When the mass fraction of SiC was 66.66%, the interaction of
"shadow effect" and "bonding effect" between the SiC particles and resin achieved the best.
Meanwhile, the erosion and wear resistance of the composite was the best. When the content of
SiC was optimal, the erosion and wear resistance of the composite was better than that of the
white cast iron under the same erosion angle.
Number of references:
16
Main heading:
Erosion
Controlled terms:
Composite coatings - Composite materials - Epoxy
resins - Resins - Silicon carbide - Wear resistance
Uncontrolled terms:
Mass fraction - Shadow effects - Sic contents - SiC
particles - Wear morphology - Wear test - Wear tester - White cast irons
Classification code:
951 Materials Science - 815.1.1 Organic Polymers - 813.2 Coating
Materials - 811 Cellulose, Paper and Wood Products - 804.2 Inorganic Compounds - 483
Soil Mechanics and Foundations - 421 Strength of Building Materials; Mechanical
Properties - 415 Metals, Plastics, Wood and Other Structural Materials - 407 Maritime and
Port Structures; Rivers and Other Waterways
DOI:
10.3969/j.issn.1001-4381.2013.06.014
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
19.
Accession number:
20132816486036
Title:
Application of near infrared techniques in paper moisture parameter
measurement
Authors:
Yu, Dian-Hong1 ; Li, Lin1 ; Zhao, Kai1/于殿泓;李琳;赵锴
Author affiliation:
1
School of Mechanical Instrumental Engineering, Xi'an University of Technology, Xi'an 710048,
China
Corresponding author:
Yu, D.-H. (dhyu0401@163.com)
Source title:
Guangzi Xuebao/Acta Photonica Sinica
Abbreviated source title:
Guangzi Xuebao
Volume:
42
Issue:
6
Issue date:
June 2013
Publication year:
2013
Pages:
747-750
Language:
English
ISSN:
10044213
CODEN:
GUXUED
Document type:
Journal article (JA)
Publisher:
Chinese Optical Society, P.O. Box 80, Xi'an, 710068, China
Abstract:
In order to solve the online inspection problem of paper moisture rate technical
specification, the moisture rate measuring technique based on the near infrared spectroscopic
analysis is researched. The basic theory on the spectral absorption of medium is expatiated and
the problems applying the theory to the moisture rate measurement are also analyzed. The key
technique that can realize the moisture rate on-line inspection by means of two near infrared
spectral lines (measuring spectral line and the reference line) is explored in detail. The
measurement project is designed and the role of the main functional module in the project is
discussed. The corresponding experimental research showed that, the precision of moisture rate
measurement based on near infrared spectroscopic method is less than 0.5%. It is higher than
measuring precision of the dry method and the method can be applied to on-line inspection in
paper-making process.
Number of references:
10
Main heading:
Moisture
Controlled terms:
Infrared devices - Inspection - Paper - Spectroscopic
analysis - Spectroscopy
Uncontrolled terms:
Experimental research - Measurement projects - Moisture
rate - Near infrared spectral - Near infrared techniques - On-line inspection - Spectral
absorptions - Technical specifications
Classification code:
741.3 Optical Devices and Systems - 801 Chemistry - 801.4 Physical
Chemistry - 811.1 Pulp and Paper - 913.3.1 Inspection
DOI:
10.3788/gzxb20134206.0747
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
20.
Accession number:
20132816477934
Title:
An empirical study on influence factors of internal personnel resistance risk in ERP
implementation change
Authors:
Zong, Qianzhu1 ; Su, Ting1 ; Leung, Xiaodou1/;;;
Author affiliation:
1
School of Economics and Management, Xi'an University of Technology, China
Source title:
WIT Transactions on Engineering Sciences
Abbreviated source title:
WIT Trans. Eng. Sci.
Volume:
80
Monograph title:
Advances in Industrial Engineering, Information and Water Resources
Issue date:
2013
Publication year:
2013
Pages:
839-846
Language:
English
ISSN:
17433533
ISBN-13:
9781845647483
Document type:
Conference article (CA)
Publisher:
WITPress, Ashurst Lodge, Ashurst, Southampton, SO40 7AA, United Kingdom
Abstract:
Enterprise Resource Planning (ERP) implementation often brings huge changes to
enterprises, but employees' resistance caused by changes is often one critical factor for ERP
projects failure. Through establishing the conceptual model of internal personnel resistance risks
formation mechanism in ERP implementation change, this paper systematically proposed the
initial influence factors of internal personnel resistance risks in ERP implementation change,
conducted empirical analysis using the factor analysis method. The results showed that the
resistance risks influence factors can be classified into five types: the organization common
factors, individual common factors, the characteristics factors of decision-making level, the
characteristics factors of implementation level, the characteristics factors of operation level. In
this way, enterprises can focus on the boycott characteristics of the different management levels,
and take countermeasures to reduce the resistance risks of ERP implementation respectively. ©
2012 WIT Press.
Number of references:
10
Main heading:
Enterprise resource planning
Controlled terms:
Industry - Water resources
Uncontrolled terms:
Conceptual model - Empirical analysis - Empirical
studies - Enterprise resource planning implementations - ERP implementation - Factor
analysis method - Formation mechanism - Management level
Classification code:
444 Water Resources - 911 Cost and Value Engineering; Industrial
Economics - 912 Industrial Engineering and Management - 912.2 Management - 913
Production Planning and Control; Manufacturing
DOI:
10.2495/AIE120901
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
Copyright © 2013 Elsevier B.V. All rights reserved. SciVerse® is a registered trademark of Elsevier
Properties S.A., used under license.
20130727 新增 15 条
1.
Accession number:
20132916505149
Title:
Research on process parameters of ballscrew manufactured by cold rolling
Authors:
Cui, F.K.1 ; Wang, X.Q.1 ; He, X.J.1 ; Li, Y.2 ; Han, Z.R.3/崔凤奎;;;李言;
Author affiliation:
1
School of Mechatronics Engineering, Henan University of Science and Technology, Luoyang
471003, China
2
School of Mechanical and Precision Instrumental Engineering, Xi'an University of Technology,
Xi'an 710048, China
3
College of Aeronautical Engineering, Shenyang Institute of Aeronautical Engineering,
Shenyang 110136, China
Source title:
Advanced Materials Research
Abbreviated source title:
Adv. Mater. Res.
Volume:
670
Monograph title:
Advanced Design and Manufacturing Technology II
Issue date:
2013
Publication year:
2013
Pages:
123-127
Language:
English
ISSN:
10226680
ISBN-13:
9783037856383
Document type:
Conference article (CA)
Publisher:
Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635,
Switzerland
Abstract:
To optimize the process parameters of cold rolling the finite element model of
metal plastic flow in cold rolling was carried out based on the cold forming principle of ballscrew
and rigid-plastic finite element theory. The adaptive mesh refinement was utilized to improve
calculation accuracy in large plastic deformation zone. Using lagrangian algorithm the processing
of cold rolling is numerically simulated by DEFORM-3D. The appropriate revolution speed is got
by analyzing different simulation results such as the maximum stress and maximum strain and
flow velocity etc. under different revolution speeds. The appropriate transmission ratio is got by
analyzing different simulation results such as the maximum stress and maximum strain and flow
velocity etc. under different transmission ratios. The research results provide evidence for
process parameters optimization. At the same time those research results lay a foundation of
further study of forming mechanism. © (2013) Trans Tech Publications, Switzerland.
Number of references:
7
Main heading:
Cold rolling
Controlled terms:
Design - Finite element method - Flow velocity - Lagrange
multipliers - Optimization - Research
Uncontrolled terms:
Adaptive mesh refinement - Ball-screw - Calculation
accuracy - Deform-3d - Finite element theories - Lagrangian algorithm - Large plastic
deformation - Process parameters optimizations
Classification code:
408 Structural Design - 535.1.2 Rolling Mill Practice - 631 Fluid
Flow - 901.3 Engineering Research - 921 Mathematics
DOI:
10.4028/www.scientific.net/AMR.670.123
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number:
20132916517174
Title:
Detecting abrupt change of streamflow at Lintong station of Wei River
Authors:
Fan, Jingjing1 ; Huang, Qiang1 ; Chang, Jianxia1 ; Sun, Dongyong2 ; Cui, Shen1/;黄
强;畅建霞;;;
Author affiliation:
1
Xi'an University of Technology, Xi'an 710048, China
2
Chang'an University, Xi'an 710054, China
Corresponding author:
Huang, Q. (wresh@mail.xaut.edu.cn)
Source title:
Mathematical Problems in Engineering
Abbreviated source title:
Math. Probl. Eng.
Volume:
2013
Issue date:
2013
Publication year:
2013
Article number:
976591
Language:
English
ISSN:
1024123X
E-ISSN:
15635147
Document type:
Journal article (JA)
Publisher:
Hindawi Publishing Corporation, 410 Park Avenue, 15th Floor, 287 pmb, New
York, NY 10022, United States
Abstract:
According to abrupt diagnosis of runoff, two methods, that is, moving approximate
entropy and moving permutation entropy, are used to analyse the abrupt year of the daily river
runoff from 1961 to 2006 at Lintong station of Wei River in Loess Plateau. The runoff series are
divided into 4 stages. With the analysis of hydrological characters of different stages, we find that
there are abrupt changes at the three years 1972, 1983, and 2002. The result shows that moving
approximate entropy and moving permutation entropy methods are useful tools for abrupt
diagnosis of runoff. The attribution of abrupt change at the Lintong runoff series is primarily due
to the reduced precipitation, increased water conservancy project, increased water consumption
of industry and agriculture, significantly decreased groundwater table, and increased evaporation.
© 2013 Jingjing Fan et al.
Number of references:
21
Main heading:
Agricultural runoff
Controlled terms:
Groundwater - Rivers - Water management - Water supply
Uncontrolled terms:
Approximate entropy - Different stages - Ground water
table - Loess Plateau - Permutation entropy - River runoffs - Water conservancy
projects - Water consumption
Classification code:
444 Water Resources - 446 Waterworks - 446.1 Water Supply
Systems - 821.5 Agricultural Wastes
DOI:
10.1155/2013/976591
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number:
20132916508938
Title:
AlNiCrFexMo0.2CoCu high entropy alloys prepared by powder metallurgy
Authors:
Fan, Yuhu1 ; Zhang, Yunpeng1 ; Guan, Hongyan1 ; Suo, Huimin1 ; He, Li1/范玉虎;
张云鹏;关红艳;索会敏;何力
Author affiliation:
1
Xi'an University of Technology, Xi'an 710048, China
Corresponding author:
Zhang, Yunpeng (ypzhang@xaut.edu.cn)
Source title:
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering
Abbreviated source title:
Xiyou Jinshu Cailiao Yu Gongcheng
Volume:
42
Issue:
6
Issue date:
June 2013
Publication year:
2013
Pages:
1127-1129
Language:
English
ISSN:
1002185X
CODEN:
XJCGEA
Document type:
Journal article (JA)
Publisher:
Rare Metals Materials and Engineering Press, P.O. Box 51, Xi'an, 721014,
China
Abstract:
AlNiCrFexMo0.2CoCu (x=0.5, 1.0, 1.5 2.0) high entropy alloys were prepared by
the method of powder metallurgy. Effects of Fe content on microstructure, hardness and
comprehensive mechanical properties were investigated. The XRD results show that constituent
phases change from bcc+fcc+ σ at x=0.5 to bcc+fcc at x=2.0. The hardness of the alloys varies
from HBW3170 MPa at x=0.5 to HBW2290 MPa at x=2.0. The fracture strengths of all the
AlNiCrFexMo0.2CoCu alloys are higher than 1100 MPa, and have a good plasticity. Copyright ©
2013, Northwest Institute for Nonferrous Metal Research. Published by Elsevier BV. All rights
reserved.
Number of references:
7
Main heading:
Powder metallurgy
Controlled terms:
Density (specific gravity) - Fracture
toughness - Hardness - Stainless steel
Uncontrolled terms:
Co-Cu alloys - Constituent phasis - Fe content - High entropy
alloys - XRD
Classification code:
421 Strength of Building Materials; Mechanical Properties - 536
Powder Metallurgy - 545.3 Steel - 931.2 Physical Properties of Gases, Liquids and
Solids - 951 Materials Science
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number:
20132916512406
Title:
Parallel techniques of the sequential codes based on multi-core
Authors:
Li, Xiang1, 2 ; Zhang, Jing1/;张璟
Author affiliation:
1
School of Computer Science and Engineering, Xi'an University of Technology, Xi'an, 710048,
China
2
School of Electrical and Information Engineering, Shaanxi University of Science and
Technology, Xi'an, 710021, China
Corresponding author:
Li, X.
Source title:
Information Technology Journal
Abbreviated source title:
Inf. Technol. J.
Volume:
12
Issue:
9
Issue date:
2013
Publication year:
2013
Pages:
1673-1684
Language:
English
ISSN:
18125638
E-ISSN:
18125646
Document type:
Journal article (JA)
Publisher:
Asian Network for Scientific Information, 308-Lasani Town, Sargodha Road,
Faisalabad, Pakistan
Abstract:
Multi-core processors are becoming ubiquitous with the continuous development
of hardware technology. But many applications are sequential applications and they receive no
benefits running on multi-core processors. Addressing this problem, using parallel techniques
improve the sequential program running on the multi-core processors. In this paper, we
introduced three parallel types of thread level parallelism. Typical DO ALL, DOACROSS, DSWP and
PS-DSWP techniques are described. These techniques can explore the parallel from sequential
application, but much dependence is not easily predictable or manifests them infrequently by the
non-speculative transformation. So many speculative techniques, such as thread level
speculation (TLS), Speculation DSWP (SpecDSWP), Speculative PS-DSWP (SpecPS-DSWP) and
Interprocedural SpecPS-DSWP (iSpecPS-DSWP), are proposed to break problematic dependences
to enhance parallelism. We introduced these speculative parallel techniques and described their
execution. SpecDSWP, SpecPS-DSWP and iSpecPS-DSWP are compared from supporting
speculation types, memory version and implement steps. At last, some extended TM systems
which support TLS techniques are analyzed from thread spawning mechanism, context passing
mechanism and sequential ordering. © 2031 Asian Network for Scientific Information.
Number of references:
54
Main heading:
Multicore programming
Controlled terms:
Parallel processing systems - Program processors
Uncontrolled terms:
Multi core - Parallel techniques - Software
pipelining - Thread level speculation - Transactional memory
Classification code:
722.4 Digital Computers and Systems - 723.1 Computer Programming
DOI:
10.3923/itj.2013.1673.1684
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number:
20132916503341
Title:
Location of the first yield point and wear mechanism in torsional fretting
Authors:
Li, Xiaoyong1, 2 ; Wang, Shilong1 ; Wang, Zhanjiang1, 2 ; Li, Pengyang3 ; Wang,
Q.Jane1, 2/;;;李鹏阳;
Author affiliation:
1
State Key Laboratory of Mechanical Transmission, Chongqing University, Department of
Mechanical, Shapingba Street, No. 174, Chongqing 400030, China
2
Department of Mechanical Engineering, Northwestern University, Evanston, IL 60208,
United States
3
Department of Mechanical Engineering and Automation, Xi'An University of Technology,
Xi'an 710048, China
Corresponding author:
Li, X. (cqulixiaoyong@163.com)
Source title:
Tribology International
Abbreviated source title:
Tribol Int
Volume:
66
Issue date:
2013
Publication year:
2013
Pages:
265-273
Language:
English
ISSN:
0301679X
CODEN:
TRBIBK
Document type:
Journal article (JA)
Publisher:
Elsevier Ltd, Langford Lane, Kidlington, Oxford, OX5 1GB, United Kingdom
Abstract:
Material wear in the contact area may lead to fatigue failure of a structural
component under torsional fretting. It is necessary to investigate the wear mechanisms
accompanying torsional fretting, especially during the unloading process. This paper intends to
analyze the torsional stress field during loading and unloading processes and to explore the link
between fretting wear and the location of material first yield, for which a parametric study on
factors influencing this location, such as coefficient of friction and stick zone ratio, is committed.
Because the surface shear traction is complex during the unloading process, the subsurface stress
field is calculated by means of an efficient semi-analytical method. The relationship between the
first yield location and wear mechanism is examined through observations of worn surfaces from
a set of torsional fretting experiments. © 2013 Elsevier Ltd.
Number of references:
29
Main heading:
Loading
Controlled terms:
Abrasion - Deformation - Numerical
methods - Stresses - Tribology - Unloading - Wear of materials
Uncontrolled terms:
Coefficient of frictions - Contact
Mechanics - Fretting - Loading and unloading - Semi-analytical methods - Structural
component - Sub-surface stress field - Torsional fretting
Classification code:
951 Materials Science - 931 Classical Physics; Quantum Theory;
Relativity - 921.6 Numerical Methods - 674.1 Small Marine Craft - 672 Naval
Vessels - 422 Strength of Building Materials; Test Equipment and Methods - 421 Strength of
Building Materials; Mechanical Properties
DOI:
10.1016/j.triboint.2013.06.002
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
6.
Accession number:
20132916508937
Title:
Effect of 950C thermal exposure on microstructures and properties of Ni-based
K403 alloys
Authors:
Liu, Jun1, 2 ; Yang, He1 ; Sun, Zhichao1 ; Tang, Wenting2/刘君;杨合;孙志超;唐文
亭
Author affiliation:
1
State Key Laboratory of Solidification Processing, Northwestern Polytechnical University,
Xi'an 710072, China
2
Xi'an University of Technology, Xi'an 710048, China
Corresponding author:
Yang, H. (yanghe@nwpu.edu.cn)
Source title:
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering
Abbreviated source title:
Xiyou Jinshu Cailiao Yu Gongcheng
Volume:
42
Issue:
6
Issue date:
June 2013
Publication year:
2013
Pages:
1123-1126
Language:
English
ISSN:
1002185X
CODEN:
XJCGEA
Document type:
Journal article (JA)
Publisher:
Rare Metals Materials and Engineering Press, P.O. Box 51, Xi'an, 721014,
China
Abstract:
Thermal exposure experiments of Ni-based cast superalloy K403 at 950°C for 5, 50
and 100 h were conducted. The effect of thermal exposure on the microstructures and
room-temperature mechanical properties of the superalloys K403 was studied. The results show
that M6C carbides segregate from intra-grains and grain boundaries, and γ' phases aggregate and
grow up with blunted corners. With increasing of thermal exposure time, on the one hand, γ'
phases of spherical or nearly spherical shapes are formed from blunted corners and parts of the
γ' phase tend to coarsen due to the connection-oriented effect. On the other hand, the offset
yielding stress and the tensile strength decrease, while the plasticity improves obviously,
resulting from the aggregation and coarsening of the γ' strengthening phase. The
room-temperature tensile fracture surface is characterized by the dendritic structure fracture for
K403 alloys before and after the thermal exposure. Whereas the intercrystalline fracture feature,
and the shallow and small dimples appear on the tensile section of the thermal-exposed alloys.
And the amount of dimples increases as the exposure time increases. Copyright © 2013,
Northwest Institute for Nonferrous Metal Research. Published by Elsevier BV. All rights reserved.
Number of references:
14
Main heading:
Cerium alloys
Controlled terms:
Carbides - Grain boundaries - Mechanical
properties - Microstructure - Nickel - Superalloys - Tensile strength
Uncontrolled terms:
Dendritic structures - Intercrystalline
fractures - Microstructures and properties - Room temperature - Strengthening
phase - Tensile fracture surfaces - Thermal exposure - Yielding stress
Classification code:
933.1 Crystalline Solids - 933 Solid State Physics - 812.1
Ceramics - 548.1 Nickel - 951 Materials Science - 547.2 Rare Earth Metals - 531
Metallurgy and Metallography - 422 Strength of Building Materials; Test Equipment and
Methods - 421 Strength of Building Materials; Mechanical Properties - 531.2 Metallography
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
7.
Accession number:
20132916515331
Title:
Mechanical characteristics of high-temperature tunnel based on analytical method
Authors:
Liu, N.F.1 ; Li, N.1 ; Liu, J.P.1 ; Yao, X.Ch.1 ; Guo, X.G.2/;;;;
Author affiliation:
1
Xi'an University of Technology, Xi'an, China
2
University of Natural Resources and Applied Life Sciences Vienna, Vienna, Austria
Source title:
Rock Characterisation, Modelling and Engineering Design Methods Proceedings of the 3rd ISRM SINOROCK 2013 Symposium
Abbreviated source title:
Rock Charact., Model. Eng. Des. Methods - Proc. ISRM
SINOROCK Symp.
Monograph title:
Rock Characterisation, Modelling and Engineering Design Methods Proceedings of the 3rd ISRM SINOROCK 2013 Symposium
Issue date:
2013
Publication year:
2013
Pages:
601-606
Language:
English
ISBN-13:
9781138000575
Document type:
Conference article (CA)
Conference name:
3rd ISRM Symposium on Rock Characterisation, Modelling and
Engineering Design Methods, SINOROCK 2013
Conference date:
June 18, 2013 - June 20, 2013
Conference location:
Shanghai, China
Conference code:
97711
Publisher:
Taylor & Francis - Balkema, P.O. Box 447, Leiden, 2300 AK, Netherlands
Abstract:
In order to address on the high-geothermal issue of the power tunnel of
Bulunkou-Kongur hydropower station, an analytical method was first used to evaluate the
temperature distribution and mechanical characteristics of surrounding rock and lining structures
of high temperature tunnel. The transient analysis was applied to study the temperature
distribution and the results showed that the temperature distribution was strongly related with
the heat transfer and thermal conductivity coefficient. The steady-state method was used to
validate the obtained temperature distribution and to further investigate the mechanical
characteristics of high-temperature tunnel. The stress of high-temperature pressurized tunnel
can be divided into three parts and the percentage of each of them in the coupled stress was also
given. A high tensile stress in the circumferential direction was observed in the surrounding rock
as well as the lining, subjected to the coupled effect of the temperature load and the internal
water pressure. © 2013 Taylor & Francis Group.
Number of references:
15
Main heading:
Thermal conductivity
Controlled terms:
Design - Geothermal energy - Mechanical
properties - Temperature distribution
Uncontrolled terms:
Analytical method - Circumferential direction - Hydropower
stations - Lining structure - Mechanical characteristics - Steady-state
method - Temperature loads - Thermal conductivity coefficient
Classification code:
408 Structural Design - 481.3.1 Geothermal Phenomena - 641.1
Thermodynamics - 951 Materials Science
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
8.
Accession number:
20132916515275
Title:
Research and application of the relation of dielectric constant and moisture
content of red clay
Authors:
Lü, Gao1 ; Li, Ning1/吕高;李宁
Author affiliation:
1
School of Civil Engineering and Architecture, Xi'an University of Technology, Xi'an, China
Source title:
Rock Characterisation, Modelling and Engineering Design Methods Proceedings of the 3rd ISRM SINOROCK 2013 Symposium
Abbreviated source title:
Rock Charact., Model. Eng. Des. Methods - Proc. ISRM
SINOROCK Symp.
Monograph title:
Rock Characterisation, Modelling and Engineering Design Methods Proceedings of the 3rd ISRM SINOROCK 2013 Symposium
Issue date:
2013
Publication year:
2013
Pages:
285-290
Language:
English
ISBN-13:
9781138000575
Document type:
Conference article (CA)
Conference name:
3rd ISRM Symposium on Rock Characterisation, Modelling and
Engineering Design Methods, SINOROCK 2013
Conference date:
June 18, 2013 - June 20, 2013
Conference location:
Shanghai, China
Conference code:
97711
Publisher:
Taylor & Francis - Balkema, P.O. Box 447, Leiden, 2300 AK, Netherlands
Abstract:
In a shallow-buried and soft surrounding rock road tunnel, landslides in working
face frequently occurred. It is necessary to timely explore the geology in front of the working face
such as litho-logy, moisture content and so on. Ground Penetrating Radar can forecast the
moisture content in the tunnel construction. In this article, we focus on the analysis of
attenuation mechanism of electromagnetic wave in the moist red clay, and establish a
mathematical model. By means of large amount of lab experiments, the relation of moisture
content and dielectric constant of the red clay has been discussed. A new way of fitting the
theoretical formula of red clay to eliminate the errors in data processing is presented. Finally, the
results of excavation construction of tunnel in Henan verify the rationality of the curve.
Consequently, it can be provided reference material and an extended example for similar project.
© 2013 Taylor & Francis Group.
Number of references:
18
Main heading:
Tunnels
Controlled terms:
Data processing - Design - Electromagnetic waves - Ground
penetrating radar systems - Mathematical models - Moisture determination
Uncontrolled terms:
Excavation construction - Ground Penetrating
Radar - Reference material - Research and application - Shallow buried - Soft
surrounding rocks - Theoretical formula - Tunnel construction
Classification code:
944.2 Moisture Measurements - 921 Mathematics - 723.2 Data
Processing and Image Processing - 716.2 Radar Systems and Equipment - 711
Electromagnetic Waves - 408 Structural Design - 401.2 Tunnels and Tunneling
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
9.
Accession number:
20132916506639
Title:
Feature extraction algorithm for palm bio-impedance spectroscopy based on
wavelet transform
Authors:
Lü, Lin-Tao1 ; Zhou, Xin-Jun1 ; Yang, Yu-Xiang1 ; Tan, Fang1/吕林涛;;杨宇祥;
Author affiliation:
1
College of Computer Science and Engineering, Xi'an University of Technology, 710048, China
Corresponding author:
Lü, L.-T. (lvlintao@xaut.edu.cn)
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
325-326
Monograph title:
Manufacturing Engineering and Process II
Issue date:
2013
Publication year:
2013
Pages:
1576-1579
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037857076
Document type:
Conference article (CA)
Conference name:
2013 2nd International Conference on Manufacturing Engineering and
Process, ICMEP 2013
Conference date:
April 13, 2013 - April 14, 2013
Conference location:
Vancouver, BC, Canada
Conference code:
97674
Sponsor:
Science and Engineering Institute; University of Ontario Institute of Technology
(UOIT), Canada
Publisher:
Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635,
Switzerland
Abstract:
Based on the palm bio-impedance spectroscopy (BIS) features, this paper suggests
a kind of feature extraction algorithm suitable for the palm BIS. The palm BIS under the
multi-frequency is measured, a wavelet transform with the characteristics of multi-resolution
analysis is selected; each set of palm BIS data is discomposed; the feature subset of wavelet
coefficients with the different dimensions is extracted;and then the support vector machine is
used to carry out the matching judgment. The testing results indicate that the correct rate of the
palm BIS feature extraction algorithm based on the wavelet transform is 91%, and its error rate is
9%,whereby testifying that this algorithm is of an excellent robustness. © (2013) Trans Tech
Publications, Switzerland.
Number of references:
4
Main heading:
Wavelet transforms
Controlled terms:
Algorithms - Feature extraction - Industrial
engineering - Spectroscopy
Uncontrolled terms:
A-wavelet transform - Bio-Impedance spectroscopies - Error
rate - Feature extraction algorithms - Feature subset - Multi frequency - Wavelet
coefficients
Classification code:
716 Telecommunication; Radar, Radio and Television - 723 Computer
Software, Data Handling and Applications - 801 Chemistry - 912.1 Industrial
Engineering - 921 Mathematics - 921.3 Mathematical Transformations
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
10.
Accession number:
20132916512422
Title:
Analysis and research of the RSA algorithm
Authors:
Qi, Na1 ; Wei, Wei2 ; Zhang, Jing2 ; Wang, Wei2 ; Zhao, Jinwei2 ; Li, Junhuai2 ;
Shen, Peiyi3 ; Yin, Xiaoyan4 ; Xiao, Xiangrong5 ; Hu, Jie2/;魏嵬;张璟;王伟;;李军怀
Author affiliation:
1
Department of Information Engineering, Shaanxi Polytechnic Institute, Shaanxi, Xian'yang,
712000, China
2
School of Computer Science and Engineering, Xi'an University of Technology, Xi'an 710048,
China
3
National School of Software, Xidian University, 710071, Xi'an, Shaanxi, China
4
Department of Computer Science and Technology, Northwest University, Xi'an 710127,
China
5
School of Information Engineering, Zhejiang Agriculture and Forest University, China
Corresponding author:
Qi, N.
Source title:
Information Technology Journal
Abbreviated source title:
Inf. Technol. J.
Volume:
12
Issue:
9
Issue date:
2013
Publication year:
2013
Pages:
1818-1824
Language:
English
ISSN:
18125638
E-ISSN:
18125646
Document type:
Journal article (JA)
Publisher:
Asian Network for Scientific Information, 308-Lasani Town, Sargodha Road,
Faisalabad, Pakistan
Abstract:
With the continuous development of society and the prevalence of computer and
network technology. How to ensure the security of information in the course of transmission
have become the most important things for people at present. With this background, we studied
how to realize encryption and decryption of the RSA (Initials of Ron Rivest, Adi Shamirh,
LenAdleman) encryption technology. This study mainly introduces the application of RSA
algorithm in encryption and decryption, mentions the technology of digital signature. Also
introduces in the process of implementation of RSA algorithm in Visual Studios environment and
operation results. Using this system for encryption and decryption of information, theoretically,
good results were obtained in safety and reliability. © 2031 Asian Network for Scientific
Information.
Number of references:
15
Main heading:
Cryptography
Controlled terms:
Algorithms - Applications - Authentication - Electronic document
identification systems - Security of data
Uncontrolled terms:
Computer and networks - Continuous
development - Decrypt - Encryption and decryption - Encryption technologies - RSA
algorithms - Security - Visual studios
Classification code:
451.2 Air Pollution Control - 723 Computer Software, Data Handling
and Applications
DOI:
10.3923/itj.2013.1818.1824
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
11.
Accession number:
20132916508787
Title:
Effects of warping dams of different storage capacity configuration proportion on
reducing sediment base
Authors:
Ran, Dachuan1 ; Yao, Wenyi1 ; Li, Zhanbin2 ; Luo, Quanhua3/冉大川;姚文艺;李占
斌;罗全华
Author affiliation:
1
Yellow River Institute of Hydraulic Research, Yellow River Conservancy Commission,
Zhengzhou 450003, China
2
Faculty of Water Resources and Hydraulic Power, Xi'an University of Technology, Xi'an
710048, China
3
Xifeng Soil and Water Conservation Experimental Station, Yellow River Conservancy
Commission, Qingyang 745000, China
Corresponding author:
Ran, D. (xfrdc@sohu.com)
Source title:
Nongye Gongcheng Xuebao/Transactions of the Chinese Society of
Agricultural Engineering
Abbreviated source title:
Nongye Gongcheng Xuebao
Volume:
29
Issue:
12
Issue date:
June 15, 2013
Publication year:
2013
Pages:
154-162
Language:
Chinese
ISSN:
10026819
CODEN:
NGOXEO
Document type:
Journal article (JA)
Publisher:
Chinese Society of Agricultural Engineering, Agricultural Exhibition Road
South, Beijing, 100026, China
Abstract:
This paper analyzed the effect of warping dams of different configuration ratios on
reducing sediment and major factors contribution rate by mathematical statistics method and the
investigation data in Dali River basin in middle of Yellow River. The investigation data showed land
area of different type dams increased with time in Dali River basin, but presented obviously slow
increasing in the near future. Warping dams reduced mean flood amount with 18.4 million m3
and sediment 12.9 million t during 1960-2002 annually, and the ratio of different type dams was
80.1%, 14.6%, 5.3%, respectively. The period of biggest reduction of sediment with 30.2% was
1990 s, and the responding ratio of different type warping dams was 1.84:2.37:5.79.The sediment
decrement of large-scale soil-retaining dam was 5.5 times than that of medium dam, and was 15
times than that of small dams. The optimized proportion of distributions of warping dams for
achieving continuous sediment reduction in the future in drainage basin was 1:3.0:7.0. The
maximum amount of sediment reduction by different types of soil retaining dams correlated
closely with flood season rainfall and 1-day maximum rainfall. Within the sediment reduction
capability of warping dams, the amount of sediment reduction increased with rainfall intensity,
presenting the characteristics of "the more sediment reduction with the more incoming
sediment". Reducing sediment of the warping dams had a proportionality relationship with
observed flood in different periods. Since 1990s, sediment reduction was about 0.23 t/m3 of unit
cubic meter of flood discharge. Sediment reduction amount was about 0.19t/m3 per unit cubic
meter of flood discharge during 1970s and 1980s, and the amount was about 0.23 t/m3 since
1990s. The warping dams reduced sediment increased with the value of 3 major factors. The
contribution ratio of the factors was in the order: the flood amount &le rain season rainfall &le
1-day maximum rainfall.
Number of references:
26
Main heading:
Sediments
Controlled terms:
Dams - Floods - Rain - Statistics - Watersheds
Uncontrolled terms:
Configuration ratio - Contribution rate - Contribution
ratios - In-coming sediments - Mathematical statistics methods - Rainfall
intensity - Sediment reduction - Storage capacity
Classification code:
441.1 Dams - 443.3 Precipitation - 444.1 Surface Water - 483 Soil
Mechanics and Foundations - 914.1 Accidents and Accident Prevention - 922.2
Mathematical Statistics
DOI:
10.3969/j.issn.1002-6819.2013.12.020
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
12.
Accession number:
20132916517275
Title:
Design and analysis of new spectroscopic system of Raman lidar for detection of
atmospheric water vapor
Authors:
Wang, Hong-Wei1 ; Hua, Deng-Xin1 ; Wang, Yu-Feng1 ; Gao, Peng1 ; Zhao, Hu1/
王红伟;华灯鑫;王玉峰;高朋;赵虎
Author affiliation:
1
School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology,
Xi'an 710048, China
Corresponding author:
Hua, D.-X. (dengxinhua@xaut.edu.cn)
Source title:
Wuli Xuebao/Acta Physica Sinica
Abbreviated source title:
Wuli Xuebao
Volume:
62
Issue:
12
Issue date:
June 20, 2013
Publication year:
2013
Article number:
120701
Language:
Chinese
ISSN:
10003290
CODEN:
WLHPAR
Document type:
Journal article (JA)
Publisher:
Institute of Physics, Chinese Academy of Sciences, P.O. Box 603, Beijing,
100190, China
Abstract:
A new ultraviolet Raman lidar system is proposed and developed for detecting
atmospheric water vapor and aerosol study. The combination of dichroic mirrors and
narrow-band interference filters is used as high-performance spectroscopic system to obtain the
fine-separation and high-efficiency extraction of Mie-Rayleigh scattering signals, the vibrational
Raman scattering signal of H2O and N2. By the American standard model and a set of
atmospheric scattering signal model, the signal-to-noise ratio (SNR) and the water vapor
measurement error are simulated and analyzed. The preliminary experiments are carried out at
nighttime in Xi'an area for detecting the atmospheric water vapor and aerosols. Taking a set of
the atmospheric returned signals measured under cloudy weather for example, the profiles of
atmospheric backscatter ratio and water vapor mixing ratio are retrieved, and the SNR profiles of
the three channels are discussed and verify that this configuration can achieve a high rejection
rate (10-7) to Mie-Rayleigh scattering. The theoretical and experimental results show that water
vapor detection error of less than 15% can be obtained under a backscatter ratio of 17, which
demonstrates the feasibility of the system for the atmospheric aerosol and water vapor
measurements. © 2013 Chinese Physical Society.
Number of references:
20
Main heading:
Signal detection
Controlled terms:
Atmospheric aerosols - Backscattering - Computer
simulation - Mixing - Moisture - Optical radar - Rayleigh scattering - Signal to noise
ratio - Spectroscopic analysis - Water vapor
Uncontrolled terms:
Atmospheric backscatters - Atmospheric water
vapor - Narrowband interference filters - Raman LIDAR - Signaltonoise ratio
(SNR) - Theoretical and experimental - Water vapor measurement - Water vapor mixing
ratio
Classification code:
802.3 Chemical Operations - 801 Chemistry - 723.5 Computer
Applications - 716.2 Radar Systems and Equipment - 716.1 Information Theory and Signal
Processing - 711 Electromagnetic Waves - 641 Heat and Mass Transfer; Thermodynamics
DOI:
10.7498/aps.62.120701
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
13.
Accession number:
20132916512425
Title:
Research of data quality assurance about ETL of telecom data warehouse
Authors:
Wei, Sun1 ; Wei, Wei2 ; Zhang, Jing2 ; Wang, Wei2 ; Zhao, Jinwei2 ; Li, Junhuai2 ;
Shen, Peiyi3 ; Yin, Xiaoyan4 ; Xiao, Xiangrong5 ; Hu, Jie2/孙伟;魏嵬;张璟;李军怀;沈沛意;;;
Author affiliation:
1
Department of Information Engineering, Shaanxi Polytechnic Institute, Shaanxi, Xian'yang,
712000, China
2
School of Computer Science and Engineering, XI'an University of Technology, XI'an 710048,
China
3
National School of Software, Xidian University, 710071, Xi'an, Shaanxi, China
4
Department of Computer Science and Technology, Northwest University, Xi'an 710127,
China
5
School of Information Engineering, Zhejiang Agriculture and Forest University, China
Corresponding author:
Wei, S.
Source title:
Information Technology Journal
Abbreviated source title:
Inf. Technol. J.
Volume:
12
Issue:
9
Issue date:
2013
Publication year:
2013
Pages:
1839-1844
Language:
English
ISSN:
18125638
E-ISSN:
18125646
Document type:
Journal article (JA)
Publisher:
Asian Network for Scientific Information, 308-Lasani Town, Sargodha Road,
Faisalabad, Pakistan
Abstract:
In recent years, with the development of data warehouse and Web technology,
more and more attention has been paid to multiple applications of the data in warehouse.
However, data quality issue is one of the biggest obstacles to the success using of data
warehouse project for many enterprises. So a data audit model is proposed and the relevant
methods are studied in the study based on the characteristics of the telecommunications industry.
Further, a three data layer audit method, consisted of audit mode data file level, record level and
index level, is constructed during Extraction Transformation Loading (ETL) process. It can
effectively improve the data quality of data warehouse. © 2031 Asian Network for Scientific
Information.
Number of references:
25
Main heading:
Loading
Controlled terms:
Data reduction - Data
warehouses - Management - Metadata - Quality assurance - Telecommunication
industry
Uncontrolled terms:
Data audits - Data files - Data quality - ETL - Extraction
transformation loadings - Multiple applications - Telecommunications industry - Web
technologies
Classification code:
913.3 Quality Assurance and Control - 912.2 Management - 723
Computer Software, Data Handling and Applications - 718 Telephone Systems and Related
Technologies; Line Communications - 717 Optical Communication - 716 Telecommunication;
Radar, Radio and Television - 672 Naval Vessels
DOI:
10.3923/itj.2013.1839.1844
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
14.
Accession number:
20132916508958
Title:
Effects of Y on microstructure and mechanical properties of Mg-8Li-4Zn-xY
magnesium alloy and its 1 mm thick sheet
Authors:
Xu, Chunjie1 ; Ma, Tao1 ; Wang, Jincheng2 ; Tu, Tao1 ; Zhang, Zhongming1/徐春杰;
马涛;王锦程;屠涛;张忠明
Author affiliation:
1
Xi'an University of Technology, Xi'an 710048, China
2
State Key Laboratory of Solidification Processing, Northwestern Polytechnical University,
Xi'an 710072, China
Corresponding author:
Xu, Chunjie (xuchunjie@gmail.com)
Source title:
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering
Abbreviated source title:
Xiyou Jinshu Cailiao Yu Gongcheng
Volume:
42
Issue:
6
Issue date:
June 2013
Publication year:
2013
Pages:
1226-1230
Language:
Chinese
ISSN:
1002185X
CODEN:
XJCGEA
Document type:
Journal article (JA)
Publisher:
Rare Metals Materials and Engineering Press, P.O. Box 51, Xi'an, 721014,
China
Abstract:
As-cast ingots of Mg-8Li-4Zn-xY magnesium alloy were prepared by lithium flux
protection in an electric-resistance furnace, and 1 mm thick sheets were prepared by forward
extrusion. Microstructures and mechanical properties of the alloy were investigated with OM,
SEM equipped with an energy-dispersive X-ray spectroscopy (EDS), XRD and the HV-120 hardness
Vickers. The results show that the matrix of as-cast Mg-8Li-4Zn-xY alloy consists of α-Mg
(hexagonal close-packed) and β-Li (body-centered cubic) phase. The precipitation strengthening
phase particles and compounds are Mg2Zn11, Mg72.05Zn27.95, MgZn, Mg2Y, MgY and unknown
phase. The matrixes of Mg-8Li-4Zn-xY magnesium alloy ingots are refined and the amount of the
precipitation strengthening phase are enhanced along with the yttrium content increasing, but
there is no appreciable changing of the matrix size, appearance and dispersion precipitation
phases in β-Li phase. On the contrary, the α-Mg phases wrapped by β-Li phase are elongated and
refined during the extrusion process, and paralleled to the extrusion direction as stripped. The
β-Li phases could coordinate plastic deformation and synchronize dynamic recrystallization, and
the strengthening phases are of uniform distribution on the crystal boundary. The ingots and 1
mm thick sheets of Mg-8Li-4Zn-xY alloys are strengthened and the hardnesses are also enhanced
in different extent along with the yttrium content increasing.
Number of references:
18
Main heading:
Lithium
Controlled terms:
Alloys - Dynamic recrystallization - Energy dispersive
spectroscopy - Extrusion - Hardness - Ingots - Magnesium alloys - Mechanical
properties - Microstructure - Precipitation (chemical) - Yttrium - Yttrium alloys - Zinc
Uncontrolled terms:
Energy dispersive x-ray spectroscopy - Hexagonal
close-packed - Mg-Li alloy - Microstructure and mechanical properties - Microstructures
and mechanical properties - Precipitation strengthening - Strengthening phasis - Uniform
distribution
Classification code:
933 Solid State Physics - 802.3 Chemical Operations - 801
Chemistry - 549 Nonferrous Metals and Alloys - 951 Materials Science - 546.3 Zinc and
Alloys - 534.2 Foundry Practice - 531.1 Metallurgy - 421 Strength of Building Materials;
Mechanical Properties - 535.2.2 Metal Forming Practice
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
15.
Accession number:
20132916515349
Title:
The characters of freeze-thaw deformation and the treatment technics of road
slopes in plateau and mountain area
Authors:
Xu, Shuanhai1 ; Li, Ning2 ; Cao, Zubao3 ; Liu, Dan4/;李宁;;;
Author affiliation:
1
Xi'an University of Technology, Xi'an Research Institute of China, Coal Technology and
Engineering Group, Xi'an, Shaanxi, China
2
Xi'an University of Technology, Xi'an, Shaanxi, China
3
Xi'an Research Institute of China, Coal Technology and Engineering Group, Xi'an, Shaanxi,
China
4
Zhengzhou University, Zhengzhou, Henan, China
Source title:
Rock Characterisation, Modelling and Engineering Design Methods Proceedings of the 3rd ISRM SINOROCK 2013 Symposium
Abbreviated source title:
Rock Charact., Model. Eng. Des. Methods - Proc. ISRM
SINOROCK Symp.
Monograph title:
Rock Characterisation, Modelling and Engineering Design Methods Proceedings of the 3rd ISRM SINOROCK 2013 Symposium
Issue date:
2013
Publication year:
2013
Pages:
703-709
Language:
English
ISBN-13:
9781138000575
Document type:
Conference article (CA)
Conference name:
3rd ISRM Symposium on Rock Characterisation, Modelling and
Engineering Design Methods, SINOROCK 2013
Conference date:
June 18, 2013 - June 20, 2013
Conference location:
Shanghai, China
Conference code:
97711
Publisher:
Taylor & Francis - Balkema, P.O. Box 447, Leiden, 2300 AK, Netherlands
Abstract:
According to the analysis, there are five types of deformation failure of the slopes
along the road which are shallow freeze-thaw creeping of gravel soil slopes in plateau meadow
area, cracking of soft rock high slopes by weathering and freeze-thaw cycling, freeze-thaw slump
along the planes of consequent rock slopes, freeze-thaw collapse of big colluvial gravel slopes
and freeze-thaw slide along basal rock of residual gravel soil slopes. Grassing, water draining, SNS
flexible protection net, concrete insert repair, anchored retaining wall or concrete pier, root pile
and anti-sliding pile are selected to treat these deformation failures based on different situation.
© 2013 Taylor & Francis Group.
Number of references:
10
Main heading:
Slope stability
Controlled terms:
Concretes - Deformation - Design - Freezing - Indium
plating - Piles - Repair - Roads and streets - Rocks - Weathering
Uncontrolled terms:
Anchored retaining walls - Consequent rock
slope - Deformation failure - Freeze-thaw - Freeze-thaw cycling - Geological
disaster - Road slope - Treatment technics
Classification code:
822.2 Food Processing Operations - 549.3 Nonferrous Metals and
Alloys excluding Alkali and Alkaline Earth Metals - 481.1 Geology - 422 Strength of Building
Materials; Test Equipment and Methods - 913.5 Maintenance - 421 Strength of Building
Materials; Mechanical Properties - 408.2 Structural Members and Shapes - 408 Structural
Design - 406.2 Roads and Streets - 412 Concrete
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
Copyright © 2013 Elsevier B.V. All rights reserved. SciVerse® is a registered trademark of Elsevier
Properties S.A., used under license.
20130803 新增 11 条
1.
Accession number:
20133016523803
Title:
Vertical static compression performance of honeycomb paperboard
Authors:
Guo, Yanfeng1, 2 ; Becker, Wilfried2 ; Xi, Wencai3/郭彦峰
Author affiliation:
1
Dept. of Packaging Engineering, Xi'an University of Technology, Jinhua Nanlu 5, Xi'an 710048
Shaanxi Prov, China
2
Dept. of Mechanical Engineering. Darmstadt, Darmstadt University of Technology, Germany
3
Dept. of Packaging Engineering, Beijing Institute of Graphic Communication, Beijing, China
Corresponding author:
Guo, Y. (guoyf@xaut.edu.cn)
Source title:
International Journal of Materials Research
Abbreviated source title:
Int. J. Mater. Res.
Volume:
104
Issue:
6
Issue date:
2013
Publication year:
2013
Pages:
598-602
Language:
English
ISSN:
18625282
Document type:
Journal article (JA)
Publisher:
Carl Hanser Verlag, Kolbergerstrasse 22, Munchen, D-81679, Germany
Abstract:
This paper evaluates the compression deformation behaviour and energy
absorbing properties of honeycomb paper- boards with different thicknesses under
homogeneous vertical static compression loading. Each piece of the static compression stress and
strain curves of the honeycomb paperboards is similar and comprises three parts of compression
deformation (elastic region, plateau region, and densi- fication region), which reflects the
mechanical properties such as approximately linear elastic deformation, large plastic deformation
with local collapse and densification. The unit volume deformation energy and strain curves and
two kinds of static compression cushioning curves show that within the elastic region and plateau
region of the stress and strain curves, the honeycomb paperboards hold better energy absorbing
properties and the change of the cushioning factor with an increase in the thickness of
honeycomb paperboards is very small.
Number of references:
13
Main heading:
Loading
Controlled terms:
Energy absorption - Honeycomb structures - Paperboards - Strain
Uncontrolled terms:
Absorbing properties - Compression deformation - Cushioning
factor - Honeycomb paperboard - Large plastic deformation - Static compression - Static
compression stress - Stress and strain
Classification code:
408.2 Structural Members and Shapes - 421 Strength of Building
Materials; Mechanical Properties - 672 Naval Vessels - 811.1 Pulp and Paper - 931.3
Atomic and Molecular Physics - 951 Materials Science
DOI:
10.3139/146.110896
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
2.
Accession number:
20133016534351
Title:
Design & development of multi-mode integrated timing device
Authors:
Ke, Xizheng1 ; Liu, Juanhua1 ; Li, Jianxun1, 2/柯熙政;;李建勋
Author affiliation:
1
Faculty of Automation and Information Engineering, Xi'an University of Technology, Xi'an
710048, China
2
Xi'an Institute of Optics and Precision Mechanics, CAS, Xi'an 710119, China
Corresponding author:
Ke, X. (xzke@xaut.edu.cn)
Source title:
Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument
Abbreviated source title:
Yi Qi Yi Biao Xue Bao
Volume:
34
Issue:
6
Issue date:
June 2013
Publication year:
2013
Pages:
1209-1217
Language:
Chinese
ISSN:
02543087
CODEN:
YYXUDY
Document type:
Journal article (JA)
Publisher:
Science Press, 18,Shuangqing Street,Haidian, Beijing, 100085, China
Abstract:
A multi-mode combined timing device was designed based on multi-scale data
fusion theory, which can output the time frequency signal with higher precision by combining the
GPS, GLONAS and Beidou timing signals. Firstly, the GPS, GLONAS and Beidou timing signals are
decomposed respectively in different wavelet scales. Secondly, the wavelet coefficients of these
signals in the same scale are synthesized with wavelet weighting method scale by scale. Thirdly,
inverse wavelet transform is used to reconstruct the signal that represents the timescale. The
new timescale is in step with UTC theoretically. Test result shows that after disciplining the local
oscillators, the frequency stability of the device reaches to 10-12, which is higher than that of the
single-mode device by one order of magnitude.
Number of references:
15
Main heading:
Signal processing
Controlled terms:
Data fusion - Radio navigation - Timing devices - Wavelet
transforms
Uncontrolled terms:
Combined timing - Different wavelets - Inverse wavelet
transforms - Local oscillators - Multi-scale datum - Time frequency signals - Wavelet
coefficients - Weighting methods
Classification code:
716.1 Information Theory and Signal Processing - 716.3 Radio Systems
and Equipment - 723.2 Data Processing and Image Processing - 921.3 Mathematical
Transformations - 943.3 Special Purpose Instruments
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
3.
Accession number:
20132916520870
Title:
Research of characteristics extraction based on dynamic pressure signal
Authors:
Liu, Wei1, 2 ; Liu, Hong Zhao1/;刘宏昭
Author affiliation:
1
School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology,
Xi'an 710048, China
2
Computer Science and Technology Department, Shaanxi Xueqian Normal University, Xi'an
710061, China
Source title:
Applied Mechanics and Materials
Abbreviated source title:
Appl. Mech. Mater.
Volume:
329
Monograph title:
Advanced Technologies on Measure and Diagnosis, Manufacturing
Systems and Environment Engineering
Issue date:
2013
Publication year:
2013
Pages:
354-358
Language:
English
ISSN:
16609336
E-ISSN:
16627482
ISBN-13:
9783037857236
Document type:
Conference article (CA)
Conference name:
3rd International Conference on Intelligent Structure and Vibration
Control, ISVC 2013
Conference date:
March 22, 2013 - March 24, 2013
Conference location:
Chongqing, China
Conference code:
97846
Sponsor:
Shanghai Jiao Tong University; Nanyang Normal University; Hebei Polytechnic
University; Henan Institute of Science and Technology; Chongqing University of Arts and Sciences;
et al
Publisher:
Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635,
Switzerland
Abstract:
The accuracy of pattern recognition was determined by the feature selection, and
two methods of the characteristic description were discussed. The results show that the
statistical characteristics could be used as a dynamic pressure signal descriptor, and the
oscillation characteristic of curve is not suitable for describing dynamic pressure signal by itself.
The selection of descriptors of dynamic pressure signal is the precondition to identify the leak
signal and the non-leak signal effectively. © (2013) Trans Tech Publications, Switzerland.
Number of references:
4
Main heading:
Pattern recognition
Controlled terms:
Mechanics
Uncontrolled terms:
Characteristics extraction - Dynamic pressure signals - Dynamic
pressures - Graphic characteristics - Leak signals - ON dynamics - Oscillation
characteristics - Statistical characteristics
Classification code:
716 Telecommunication; Radar, Radio and Television - 931.1
Mechanics
DOI:
10.4028/www.scientific.net/AMM.329.354
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
4.
Accession number:
20133016535779
Title:
Research on automatic identification for the leakage signal of petroleum pipeline
Authors:
Liu, Wei1 ; Liu, Hongzhao2/;刘宏昭
Author affiliation:
1
School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology,
Xi'an, Shaanxi, 710001, China
2
Department of Computer Science and Technology, Shaanxi Xueqian Normal University, Xi'an,
Shaanxi, 710001, China
Source title:
Sensors and Transducers
Abbreviated source title:
Sensors Transducers
Volume:
21
Issue:
SPEC.ISS.5
Issue date:
2013
Publication year:
2013
Pages:
147-152
Language:
English
E-ISSN:
17265479
Document type:
Journal article (JA)
Publisher:
International Frequency Sensor Association, 46 Thorny Vineway, Toronto, ON
M2J 4J2, Canada
Abstract:
The waveform of dynamic pressure wave contains the safety information of
petroleum pipeline. The complete automatic identification program for the leakage signal of
petroleum pipeline was proposed based on the characteristics of the dynamic pressure wave
signal from the point of view of the signal processing. Wavelet and empirical mode
decomposition method were adopted to deny the signals collected by dynamic pressure
transmitter respectively. We tried to use the statistical characteristics of the one-dimensional
digital sequence to describe the signal. Support vector machine method which is suitable to small
size sample was selected to automatically identify the leaked signal of petroleum pipeline. And a
relatively high signal identification rate was acquired. © 2013 IFSA.
Number of references:
8
Main heading:
Petroleum pipelines
Controlled terms:
Automation - Signal processing - Support vector machines
Uncontrolled terms:
Automatic identification - Dynamic
pressures - EMD - Empirical mode decomposition method - Safety
information - Statistical characteristics - Support vector machine method - SVM
Classification code:
619.1 Pipe, Piping and Pipelines - 716.1 Information Theory and Signal
Processing - 723 Computer Software, Data Handling and Applications - 731 Automatic
Control Principles and Applications - 732 Control Devices
Database:
Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
5.
Accession number:
20133016534004
Title:
The cross-layer design of wireless mesh networks based on multimedia services
Authors:
Sun, Qindong1 ; Zhang, Benliang1 ; Yang, Min1 ; Wang, Qian1/孙钦东;
Author affiliation:
1
Key Lab. for Network Computing and Security of Shaanxi Province, Xi'an University of
Technology, Xi'an 710048, China
Corresponding author:
Sun, Q. (sqd@xaut.edu.cn)
Source title:
Journal of Computational Information Systems
Abbreviated source title:
J. Comput. Inf. Syst.
Volume:
9
Issue:
11
Issue date:
June 1, 2013
Publication year:
2013
Pages:
4495-4504
Language:
English
ISSN:
15539105
Document type:
Journal article (JA)
Publisher:
Binary Information Press, P.O. Box 162, Bethel, CT 06801-0162, United States
Abstract:
In this paper, we have introduced a cross-layer design model which is based on
multimedia services in order to favor the QoS demand in wireless mesh networks. By means of
this model the relevant parameters in each layer of the whole network protocol stacks have been
considered. Parameters Link consumption and packet error rate in the wireless transmission have
been optimal controlled to enhance the throughpu