- Industrial & lab equipment
- Electrical equipment & supplies
- Power conditioning
- Uninterruptible power supplies (UPSs)
- Tripp Lite
- SU6000RT4UHV
- User's manual
Tripp Lite SU6000RT4UHV User's Manual
Add to my manuals
7 Pages
Tripp Lite SU6000RT4UHV offers ultimate power protection for mission-critical equipment with its true online operation, pure sine wave output, and zero transfer time to battery. Its hot-swappable power and battery modules, along with a detachable PDU, ensure easy maintenance without downtime. The LCD display provides detailed monitoring, while the included PowerAlert software enables comprehensive network power management.
advertisement
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: [email protected]
Model #: SU6000RT4UHV
SmartOnline 6kVA On-Line Double-Conversion UPS, 4U Rack/Tower, 200-240V NEMA outlets
Highlights
Completely user hot-swappable—no service call or technician needed
Protects rackmount servers, telecom systems and other networking equipment in high-voltage environments with true on-line operation, pure sine wave output and zero transfer time
4 AC outlets (2 L6-20R; 2 L6-30R) with 200/208/220/230/240V 50/60Hz output
6kVA/5400W capacity in 4U form factor with power module and independent, detachable PDU
Hot-swappable power and battery modules
8.5-minute half-load runtime, 2-minute full-load; expandable runtime with external battery packs
Front panel LEDs with detailed LCD monitoring and control screen
USB, RS232 and SNMP communication ports with included PowerAlert software for complete network power management and control
$250,000 Ultimate Lifetime Insurance; 2-year warranty
Description
Featuring true on-line operation with pure sine wave output, zero transfer time to battery and complete UPS replacement capability with no downtime, the SU6000RT4UHV provides the highest level of protection available for mission-critical equipment from power outages, voltage fluctuations and transient surges. It converts incoming AC power to DC, and re-converts it back to filtered AC output with a pure sine wave, isolating connected components from all power problems in high-voltage environments. The SU6000RT4UHV has a 6kVA/5400W capacity and 4 AC outlets
(2 L6-20R; 2 L6-30R).
With its detachable PDU, the SU6000RT4UHV is easily hot-swappable by a user of any skill set—no need for lengthy and expensive service calls, and no downtime if a repair or battery replacement is needed. In bypass mode, the PDU passes power to equipment without the use of the power and battery modules, allowing them to be removed while keeping your application in operation.
UPS battery backup keeps connected equipment operational through short power failures, and provides time to save data and perform an orderly system shutdown in case of a prolonged blackout. The SU6000RT4UHV‘s runtime can be expanded with optional external battery packs.
The SU6000RT4UHV features a highly efficient (96%) economy mode setting that can significantly reduce a facility's energy costs by minimizing heat output, reducing cooling requirements and consuming less electricity.
An LCD display with LED indicators enables IT personnel to monitor operating modes and conditions. The LCD/LED panel rotates for viewing in horizontal rack or vertical tower installations and includes an audible alarm that signals various conditions.
The SU6000RT4UHV features a USB port and a DB9 port that, when used with Tripp Lite's included PowerAlert software, provide comprehensive network power monitoring and control. An optional SNMPWEBCARD accessory can enable the UPS to operate as an IP managed device.
The unit requires only 4U of rack space in a standard rack enclosure and can be installed in a 2-post rack using the 2POSTRMKITHD accessory, or in a tower configuration with the 2-9USTAND accessory.
The SU6000RT4UHV comes with $250,000 Ultimate Lifetime Insurance coverage for connected equipment and a 2-year warranty.
Features
Tripp Lite SU6000RT4UHV 6000VA / 6kVA / 5400 watt online, double-conversion UPS system in a single 4U rack/tower compatible housing
(at 208V nominal, output is limited to 4992 watts)
Full-time active power conditioning maintains clean, continuous dual-conversion AC output free of voltage fluctuations, power interruptions and line noise
Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions
Detachable back panel PDU contains input line cord connection and output receptacles, plus manual bypass switch to support hot-swappable whole UPS replacement with no interruption to connected equipment
hot-swappable whole UPS replacement with no interruption to connected equipment
L6-30P input plug; two L6-30R and two L6-20R outlets
Included rail kit supports 4U 19 inch rackmount installation in 4 post racks
Optional 2POSTRMKITHD supports installation in 2 post 19 inch racks (1 required for SU6000RT4UHV)
Optional 2-9USTAND supports upright tower placement (1 required for SU6000RT4UHV)
Maximum installed rack depth of only 20.7 in. / 52.6cm
Maintains full-time sine wave output within 2% of selected 200/208/220/230/240V nominal in double conversion mode
Corrects brownouts to 156V at full load (100V at 50% load or less)
Corrects overvoltages to 290V at full load (300V at 90% load or less)
Supports 50/60Hz operation for worldwide frequency compatibility
Double-conversion operation offers full-time AC to DC, then DC to AC conversion to maintain perfectly regulated sine wave AC output with enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types
High efficiency ECONOMY MODE operation significantly reduces BTU heat output and operating energy costs
Network-grade AC surge and noise suppression
Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via built-in RS-232, USB and optional
SNMP card slot interfaces
UPS card slot supports one card-based network interface option (part # SNMPWEBCARD) or dry-contact monitoring accessory (part #
RELAYIOCARD)
Optional SNMPWEBCARD offers communications and control via secure remote web and network interfaces
Optional RELAYIOCARD supports six configurable hard contact closure outputs for custom event notification
Optional RELAYIOMINI interface module offers three configurable hard contact closure outputs for custom event notification (requires removal of USB interface module)
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
Includes Free PowerAlert monitoring software packages; PowerAlert LOCAL for desktops and small business networks, PowerAlert NSA
(Network Shutdown Agent) for larger networks and PowerAlert NMS (Network Management System) for monitoring up to 250
SNMP-enabled UPS, PDU and other networking devices
Front panel LEDs and LCD readout with scroll controls support front-panel visual monitoring of all major UPS functions with support for a variety of control options to support advanced UPS settings and configurations
LED/LCD display panel rotates for viewing in rackmount or tower configurations
Supports Emergency Power Off (EPO) via built-in interface
Battery independent restart ensures automatic UPS power-up without user interaction after lengthy power outages, even when batteries are expired and require replacement
BP192V12-3U external battery packs are field replaceable and hot swappable
Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)
Frequency conversion mode enables conversion of 60Hz to 50Hz or 60Hz to 50Hz (no de-rating)
Specifications
OUTPUT
Output Volt Amp
Capacity (VA)
Output kVA capacity
(kVA)
Output Watt Capacity
(watts)
Output kW capacity
Output power factor
Output Capacity
Details
Crest Factor
Nominal Output
Voltage(s) Supported
6000
6.0
5400
5.4
0.9
Output capacity de-rates to 4992 watts when used at 208V nominal
3:1
200V; 208V; 220V; 230V; 240V
Frequency compatibility
Frequency compatibility details
Output voltage regulation (line mode)
Output voltage regulation (Economy line mode)
Output voltage regulation (Battery mode)
50/60 Hz (auto-selectable)
Output frequency matches input nominal on startup; Frequency conversion mode enables conversion of 60Hz to
50Hz or 50Hz to 60Hz (no de-rating)
+/- 2%
+/- 10%
+/- 2%
Built-in UPS output receptacles
Output receptacle details
2 L6-20R outlet(s); 2 L6-30R outlet(s)
Output receptacles and input line cord are mounted on a detachable PDU backplate with bypass switch to enable hot-swappable power module replacement
Output circuit breaker 20A breaker protects L6-20R outlets, L6-30R outlets are unbreakered
Output AC waveform
(AC mode)
Pure Sine wave
Output AC waveform
(battery mode)
INPUT
Rated input current
(at maximum load)
Pure Sine wave
31.9A (200V), 30.6A (208V), 29A (220V), 27.7A (230V), 26.6A (240V)
200V AC; 208V AC; 220V AC; 230V AC; 240V AC Nominal Input
Voltage(s) Supported
Nominal input voltage description
Factory configured to 208V
UPS input connection type
UPS Input cord length (ft.)
L6-30P
10
UPS Input cord length (m)
Recommended
Electrical Service
BATTERY
Full load runtime
(minutes)
Half load runtime
(minutes)
Expandable battery runtime
External battery pack compatibility
DC system voltage
(VDC)
3
30A
2 minutes (5400 watts)
8.5 minutes (2700 watts)
Runtime is expandable with external battery packs
BP192V12-3U
192
; BP192V557C-1PH ; BP192V787C-1PH ; BP192V1037C-1PH ; BP192V1407C-1PH
Battery recharge rate
(included batteries)
Replacement battery cartridge (internal
UPS battery replacement)
6 hours from 10% to 90% (internal batteries)
RBC5-192
Battery Access Front panel battery access door
Battery replacement description
Hot-swappable, user replaceable internal batteries
VOLTAGE REGULATION
Voltage regulation description
Online, double-conversion power conditioning
Overvoltage correction
Corrects overvoltages as high as 300V (
Undervoltage correction
Corrects undervoltages as low as 100 (
LEDS ALARMS & SWITCHES
LED Indicators 6 LEDs indicate line power, online mode, economy/bypass mode, on-battery, charger and AC output status; LCD screen offers additional information and control options
Alarms Unique audible alarms for all major UPS, environmental and power conditions (see manual)
Alarm cancel operation
Alarm cancel switch
Switches Includes main power off/on switch, plus 2 switches to set and execute scrollable LCD functions. A manual bypass switch featured on the detachable PDU allows for complete removal of the UPS during routine maintenance without disrupting power to connected loads.
SURGE / NOISE SUPPRESSION
UPS AC suppression response time
Instantaneous
Yes EMI / RFI AC noise suppression
PHYSICAL
Installation form factors supported with included accessories
Installation form factors supported with optional accessories
Primary form factor
4 post 19 inch rackmount (mounting rail kit included)
2 post rackmount (2POSTRMKITWM); Tower (2-9USTAND)
Rackmount
6.85 x 17.5 x 20.7
UPS / Power Module dimensions in primary form factor
(height x width x depth / inches)
UPS / Power Module dimensions in primary form factor
(height x width x depth / cm)
17.4 x 44.5 x 52.6
Installed whole system total rack space height (rack spaces)
4U
Secondary form factor Tower
UPS / Power Module weight (lbs)
108
49 UPS / Power Module weight (kg)
UPS Shipping dimensions (height x width x depth / inches)
12.7 x 23.6 x 29.1
UPS Shipping dimensions (height x width x depth / cm)
32.3 x 59.9 x 73.9
Shipping weight (lbs)
Shipping weight (kg)
158
71.7
UPS housing material Steel
Fans Cooling method
ENVIRONMENTAL
Operating
Temperature Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius Storage Temperature
Range
Relative Humidity 0 to 95%, non-condensing
1767 AC mode BTU / hr.
(full load)
AC economy mode
BTU / hr. (full load)
707
1784 Battery mode BTU / hr. (full load)
AC economy mode efficiency rating
(100% load)
Operating Elevation
(ft)
Audible Noise
96%
0-3000m (0 to 10,000 ft.)
60 dBA at front side 1 meter
0-3000 m Operating Elevation
(m)
COMMUNICATIONS
Communications interface
Network monitoring port description
PowerAlert software
USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
Additional contact closure support with optional RELAYIOCARD and RELAYIOMINI interface cards. RELAYIOMINI installation requires removal of panel containing USB ports
Included
Communications cable
USB, DB9 serial and EPO cables included
WatchDog compatibility
Yes
LINE / BATTERY TRANSFER
Transfer time No transfer time (0 ms.) in online, double-conversion mode
Transfer time
(economy mode)
8 ms. typical power failure response in optional economy mode
Low voltage transfer to battery power
(setpoint)
High voltage transfer to battery power
(setpoint)
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure)
156V (full load) / 100V (50% load or less, derates linearly)
280V (full load) / 300V (90% load or less)
Cold-start operation supported
High availability UPS features
Green & high efficiency features
CERTIFICATIONS
UPS Certifications
Automatic inverter bypass; Manual bypass switch; Detachable hot-swap PDU; Hot swappable UPS power module;
Hot swappable batteries
High efficiency economy mode operation; Support for daily startup and shutoff; Schedulable daily hours of economy mode operation
Tested to UL1778 (USA); Tested to CSA (Canada); Meets FCC Part 15 Category A (EMI); ROHS (Restriction of
Hazardous Substances)
IEC 61000-4-5 1995 B Surge Immunity UPS Certification details
WARRANTY
Product Warranty
Period (Worldwide)
2-year limited warranty
Related Items
Optional Products
Related Model
RELAYIOMINI
BP192V12-3U
2POSTRMKITHD
2-9USTAND
SNMPWEBCARD
ENVIROSENSE
RELAYIOCARD
AS400CABLEKIT2
WEXT3-SU6000HV
Description
3 Relay I/O Mini-module
BP192V12-3U - External Battery Pack for UPS System
Enables 2-Post Rackmount Installation of 3U and Larger UPS, Transformer and Battery
Pack Components
Enables Tower Placement of Rackmount UPS Systems
For remote monitoring and control via SNMP, Web, or Telnet.
Monitors temperature, humidity and contact-closure inputs. (Requires SNMPWEBCARD or switched PDU.)
Programmable Relay I/O Card
Power Management Tools - UPS Communication Cable Kit for System i / AS400 / iSeries Servers
3-Year Extended Warranty - For SU6000RT3UHV only
1
1
1
Qty.
1
1
1
1
1
1
WEXT5-SU6000HV 5-Year Extended Warranty - For SU6000RT3UHV only
More information, including related products, owner's manuals, and additional technical specifications, can be found online at www.tripplite.com/en/products/model.cfm?variables.txtModelID=4534 .
1
Copyright © 2013 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- 6 kVA 5400 W
- 4 AC outlet(s)
- Rackmount Black
Related manuals
advertisement