Battery charging
Registering a handset
For optimal performance, charge the handset
battery for at least 16 hours before use.
To register a new handset:
1. Place the unregistered 12:00AM
handset in the telephone Place in
base.
Charger
2. Press the MENU softkey on the telephone base while in idle mode.
3. Press the UP and DOWN Navkeys to highlight Register 12:00AM
Handset, then press the Register handset:
Press MENU in the
SELECT softkey.
base. Find 'Register
in the Main
• Registering Handset will Handset'
Menu. Press SELECT.
appear on the telephone base display.
• Registration in progress... 12:00AM
will appear on the handset Registration
display.
in progress...
• The registration process may take up to 90 seconds to complete.
When the registration process is complete, the
telephone base and handset will generate a
confirmation tone. The newly registered handset
will be assigned the next handset registration
number.
Quick start guide
for model LS5105
Battery installation
Electrical outlet
not controlled by
a wall switch
Install the battery as shown below.
1. Press the tab and
slide the battery
compartment cover
downwards.
2. Insert the plug as
indicated. Make sure
it is plugged securely
and matches the colorcoded label inside the
battery compartment.
THIS SIDE UP
Battery Pack
BT5632 / BT5872
3.6V 550mAh Ni-MH
THIS SIDE UP
Battery Pack
BT5632 / BT5872
3.6V 550mAh Ni-MH
WARNING: DO NOT BURN OR PUNCTURE BATTERIES
MADE IN CHINA
WARNING: DO NOT BURN OR PUNCTURE BATTERIES
MADE IN CHINA
3. Place the battery
with the label THIS
SIDE UP facing
up and the wires
inside the battery
compartment.
Power
adapter
4. Align the cover flat
against the battery
compartment, then
slide it upwards until it
clicks into place.
Charger
Charge light
THIS SIDE UP
Battery Pack
BT5632 / BT5872
3.6V 550mAh Ni-MH
WARNING: DO NOT BURN OR PUNCTURE BATTERIES
MADE IN CHINA
THIS SIDE UP
Battery Pack
BT5632 / BT5872
3.6V 550mAh Ni-MH
WARNING: DO NOT BURN OR PUNCTURE BATTERIES
MADE IN CHINA
NOTE:
Use only the power adapter and battery supplied
with your VTech telephone.
NOTE:
For complete feature instructions, please refer
to your user’s manual.
IMPORTANT!
If your product is not working properly:
• Refer to the Troubleshooting section of the
user’s manual.
• Visit our website at www.vtechphones.com or
call 1 (800) 595-9511. In Canada, go to www.
vtechcanada.com or 1 (800) 267-7377.
96-006551-020-100
issue 1