RP-WR5442 Wireless-N/b/g 4-P AP Router, 2T2R Feature

RP-WR5442
Wireless-N/b/g 4-P AP Router, 2T2R
The 300Mbps Wireless-N Broadband
Router is suitable for Small Office/Home Office
(SOHO) Wireless network solution. It is a 4 in 1
network device, which combines wireless
access point, firewall, 4-port Switch and the
NAT-Router. It provides up to 300Mbps data
transmission rate in 2.4GHz frequency, with
IEEE802.11n, IEEE802.11g and IEEE802.11b
and backwards compatible with all IEEE
802.11n/g/b devices. The router also supports
wireless LAN up to 128-bit WEP, WPA/WPA2 encryption security. The 300Mbps Wireless-N
Broadband Router also provides WEB and Remote Management and system log so that
network administrators can manage and monitor the network in real time.
The 300Mbps Wireless-N Broadband Router also provides a hardware WPS (Wi-Fi
protected setup) button, which helps you setup a secured wireless network in a minute and
activate the wireless protection easily.
Feature












Comply with IEEE802.11n/g/b, IEEE802.310Base-T, IEEE802.3u100Base-TX standards
Parental controls to supervise Internet activity
Connect your computers, gaming consoles, Internet-enabled HDTVs and Blu-Ray players,
and other wireless devices at up to 300 Mbps of transfer speeds
Advanced WAP/WAP2 wireless security and SPI firewall protection
MIMO technology enabled
Support DHCP Client, PPPoE Client, Static IP, PPTP
Support multi-wireless mode: AP, WDS, AP+WDS, repeater, client
WPS button securely connects devices at a snap
Support FTP, PPTP and L2 TP pass through
IP and MAC binding effectively prevent ARP virus attacks
Support WMM
Support DMZ
Specification
Standards



Interface



Antenna
Wireless mode



Modulation Types


Data Rates



Transmission Distance



Output Power



Receive sensitivity




Management Features





Router Features



Ethernet Features



Security


Power Supply
Environment



Dimension
Certifications


IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
4 * RJ-45 10/100Mbps LAN Port
1 * RJ-45 WAN Port
1 * Reset to factory default
1 * Button for WPS
Two Detachable Antenna
Support AP, WDS, AP+WDS, repeater, client, multi-AP
WPS (support SW mode and H/W push-button)
CCK, OFDM
802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps
802.11n(20MHz): up to 144Mbps
802.11n(40MHz): up to 300Mbps
Indoor: up to 70m
Outdoor: up to 250m
802.11n: up to 13dBm ± 2 dBm
802.11g: up to 14dBm ± 2 dBm
802.11b: up to 18dBm ± 2 dBm
802.11n 20MHz/40MHz: -65dBm/-62dBm
802.11g: -68dBm
802.11b: -84dBm
Firmware upgrade via HTTP
WAN and LAN side connection statistics
Configuration of static routes and routing table
Configuration of NAT / NAPT
Selection of Bridge or Router Mode
PPP user ID and password
DHCP Server and Client
NAPT (Network Address and Port Translation)
ICMP (Internet Control Message Protocol)
DDNS (Dynamic Domain Name Service)
Compliant with IEEE 802.3 and 802.3u 10/100 Mbps
All Ethernet ports support auto-crossover (MDI/MDI-X)
Password protected configuration access
User authentication (PAP / CHAP) with PPP
Support 64/128-Bit WEP encryption, WPS, WPA-PSK,
WPA2-PSK, WPS
External power adapter DC9V
Operating Temperature: 0°C ~ 40°C
Operating Humidity: 10%~90% (Non-Condensing)
183 * 125.2 * 22 mm
FCC, CE
Application
Ordering information
RP-WR5442
Wireless-N/b/g 4-P AP Router, 2T2R
REPOTEC CO., LTD.
3F, No.258, Lian Cheng Rd., Chung Ho City, Taipei Hsien 235, TAIWAN
TEL: 886-2-8227-1888 FAX: 886-2-8227-1818