Datalogic GryphonD432 Specifications

Gryphon D432/D412Plus
Barcode Reader
TM
Product Reference Guide
Datalogic Scanning, Inc.
959 Terry Street
Eugene, Oregon 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein
may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic Scanning, Inc. or
its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”). Owners of Datalogic products are hereby granted a nonexclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal business purposes.
Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and
shall ensure that all notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic versions may either be downloadable from the Datalogic website (www.scanning.datalogic.com) or provided
on appropriate media. If you visit our website and would like to make comments or suggestions about this or other Datalogic
publications, please let us know via the "Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A and the
E.U. All other brand and product names referred to herein may be trademarks of their respective owners.
®
®
®
®
®
Microsoft Windows , Windows 2000, Windows CE, Windows NT, Windows XP and the Windows logo are registered
trademarks of Microsoft Corporation.
Gryphon is a trademark of Datalogic S.p.A, in many countries, including the U.S.A.
Patents
This product is covered by one or more of the following patents:
US Pat.: 6,512,218 B1; 6,808,114 B1; 6,877,664 B1; 6,997,385 B2; 7,053,954 B1; 7,102,116 B2; 7,282,688 B2; 7,387,246 B2.
European Pat.: 996,284 B1; 999,514 B1; 1,128,315 B1; 1,396,811 B1.
Additional patents pending.
Table of Contents
How to Use this Manual ................................................................................................................................................................................................ 3
Registering Your Datalogic Product ............................................................................................................................................................3
Document Conventions .............................................................................................................................................................................................. 3
General View ..................................................................................................................................................................................................................... 4
Compliance ....................................................................................................................................................................................................................... 4
CE Compliance ..............................................................................................................................................................................................................5
FCC Compliance ...........................................................................................................................................................................................................5
Laser Safety ....................................................................................................................................................................................................................5
LED Illuminator ...................................................................................................................................................................................................5
Aiming System ....................................................................................................................................................................................................5
WEEE Compliance ..............................................................................................................................................................................................9
Power Supply .................................................................................................................................................................................................... 10
Service and Support ....................................................................................................................................................................................... 10
Chapter 1. Introduction ................................................................................................................................................................. 11
Gryphon D432/D412Plus Family Description ....................................................................................................................................................11
Package Contents .........................................................................................................................................................................................................11
Configuration Methods ..............................................................................................................................................................................................12
Reading Configuration Codes .............................................................................................................................................................................. 12
Using Datalogic Aladdin™ ...................................................................................................................................................................................... 12
Sending Configuration Strings from Host ....................................................................................................................................................... 12
Chapter 2. Using the Gryphon D432/412Plus .............................................................................................................................. 13
Aiming System ...............................................................................................................................................................................................................13
Normal Operation .........................................................................................................................................................................................................14
Image Capturing ....................................................................................................................................................................................................... 15
Basic Configuration Parameters ................................................................................................................................................................ 15
Advanced Configuration Parameters ...................................................................................................................................................... 15
Autoscanning ............................................................................................................................................................................................................. 16
Normal Mode .................................................................................................................................................................................................... 16
Pattern Mode .................................................................................................................................................................................................... 16
Defining Data Formatting ...................................................................................................................................................................................... 16
Concatenation .................................................................................................................................................................................................. 17
Chapter 3. Initial Setup .................................................................................................................................................................. 19
RS-232 Interface Selection ..................................................................................................................................................................................... 19
Wedge Interface Selection .................................................................................................................................................................................... 20
USB Interface Selection ........................................................................................................................................................................................... 20
IBM PORT 9B/PORT 5B/IBM USB ................................................................................................................................................................. 23
Chapter 4. Configuration Using Code Symbols ........................................................................................................................... 25
Default Settings .............................................................................................................................................................................................................26
Changing Default Settings .................................................................................................................................................................................... 30
Extended Header/Terminator Keys .................................................................................................................................................................... 45
Concatenation Options ................................................................................................................................................................................. 55
Advanced Data Format ...............................................................................................................................................................................................91
Format Definition ............................................................................................................................................................................................ 92
FIELD EXTRACTION BY CHARACTER ......................................................................................................................................................... 95
FIELD EXTRACTION BY POSITION .............................................................................................................................................................. 96
ADD NEW STRING .......................................................................................................................................................................................... 97
STRING INSERTION .......................................................................................................................................................................................... 99
String Insertion Procedure .........................................................................................................................................................................100
STRING DELETION .........................................................................................................................................................................................101
String Deletion Procedure .........................................................................................................................................................................102
STRING SUBSTITUTION ................................................................................................................................................................................103
FIELD DELETION .............................................................................................................................................................................................105
Match Conditions ...................................................................................................................................................................................................109
Format Enable/Disable .........................................................................................................................................................................................110
Product Reference Guide
1
Contents
Mismatch Result ......................................................................................................................................................................................................112
Chapter 5. References ................................................................................................................................................................. 113
RS-232 — USB COM ...............................................................................................................................................................................................113
ACK/NACK Protocol ......................................................................................................................................................................................113
RX Timeout ......................................................................................................................................................................................................113
USB Keyboard ...........................................................................................................................................................................................................113
Keyboard Speed ............................................................................................................................................................................................113
Code Selection .........................................................................................................................................................................................................114
Issue Identical Codes ...................................................................................................................................................................................114
Reading Parameters ...............................................................................................................................................................................................114
Safety Time ......................................................................................................................................................................................................114
Configuration Editing Commands ....................................................................................................................................................................114
Chapter 6. Test Code Symbols.................................................................................................................................................... 115
Chapter 7. Maintenance.............................................................................................................................................................. 117
Chapter 8. Technical Features .................................................................................................................................................... 119
Gryphon D432/D412Plus Family Common Features .......................................................................................................................119
Indicators ...................................................................................................................................................................................................................122
Gryphon D432/D412Plus LED Indicators ..............................................................................................................................................122
Beeper ...............................................................................................................................................................................................................122
Good Read Spot .............................................................................................................................................................................................122
Appendix A. Host Configuration Strings .................................................................................................................................... 123
SERIAL CONFIGURATION STRINGS ..........................................................................................................................................................124
Appendix B. Programming for Expert Users .............................................................................................................................. 141
Appendix C. Code Identifier Table .............................................................................................................................................. 145
Appendix D. Hex and Numeric Table .......................................................................................................................................... 149
2
Gryphon™ D432/D412Plus
Preface:
About this Guide
How to Use this Manual
This Product Reference Guide contains comprehensive basic user instructions for the Gryphon
D432/D412 Plus, as well as advanced user information such as barcode configuration and
parameters.
This section provides an overview of the manual’s organization, and the product.
Registering Your Datalogic Product
Datalogic values your feedback. Please take a few moments and complete the Product
Registration form located on our website (www.datalogic.com). Registering your products ensures
that you will be informed of the latest product news, technical specifications, software updates
and other future developments from Datalogic.
Document Conventions
Formatting conventions are used throughout this guide to provide a consistent method for
representing screen shots, command entries, and keyboard characters. This guide also provides
special conventions for notes and cautions, information of high interest.
NOTES contain information necessary for properly diagnosing, repairing and operating the terminal.
The CAUTION symbol advises you of actions that could damage equipment or property.
CAUTION
A WARNING symbol calls attention to actions that could result in personal injury.
WARNING
Product Reference Guide
3
General View
Figure 1. Gryphon™ D432/D412 Plus Reader
Compliance
Figure 2. Gryphon™ D432/D412 Plus Reader Product Labels
Aiming System Imager
Beam Output Window
4
Gryphon™ D432/D412Plus
Compliance
CE Compliance
This is a Class A product. In a domestic environment this product may cause radio interference, in
which case the user may be required to take adequate measures.
WARNING
FCC Compliance
Modifications or changes to this equipment without the express written approval of Datalogic
could void the authority to use this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference which may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
Laser Safety
The Gryphon D432/D412Plus hand-held reader is a Class 1 LED product regarding its
Illuminator and a Class 2 laser product regarding its Aiming System.
LED Illuminator
The use of an illuminator in the Gryphon D432/D412Plus Family is a Class 1 LED product:
ILLUMINATORE LED CLASSE 1
AUSLEUCHTER LED KLASSE 1
ILLUMINATEUR A LED DE CLASSE 1
ILUMINADOR LED DE CLASE 1
Aiming System
The Gryphon D432/D412Plus aiming system meets the requirements for laser safety.
Product Reference Guide
5
Table 1. Laser Safety
I
D
F
E
LA LUCE
LASER È
VISIBILE
ALL'OCCHIO
UMANO E
VIENE
EMESSA
DALLA
FINESTRA
INDICATA
NELLA
FIGURA.
DIE LASERSTRAHLUNG
IST FÜR DAS
MENSCHLICH
E AUGE
SICHTBAR
UND WIRD AM
STRAHLAUSTRITTSFENTST
ER
AUSGESENDET
(SIEHE BILD)
LE RAYON
LASER EST
VISIBLE À
L'OEUIL NU
ET IL EST
ÉMIS PAR LA
FENÊTRE
DÉSIGNÉE
SUR
L'ILLUSTRATI
ON DANS LA
FIGURE
LA LUZ LÁSER
ES VISIBLE AL
OJO
HUMANO Y
ES EMITIDA
POR LA
VENTANA
INDICADA EN
LA FIGURA.
LUCE LASER
NON FISSARE
IL FASCIO
APPARECCHI
O LASER DI
CLASSE 2
MASSIMA
POTENZA
D'USCITA:
LASERSTRAHL
UNG NICHT IN
DEN STRAHL
BLICKEN
PRODUKT DER
LASERKLASSE 2
MAXIMALE
AUSGANGSLEI
STUNG:
RAYON LASER
EVITER DE
REGARDER LE
RAYON
APPAREIL
LASER DE
CLASSE 2
PUISSANCE
DE SORTIE:
RAYO LÁSER
NO MIRAR
FIJO EL RAYO
APARATO
LÁSER DE
CLASE 2
MÁXIMA
POTENCIA DE
SALIDA:
LUNGHEZZA
D'ONDA
EMESSA:
WELLENLÄGE:
LONGUER
D'ONDE
EMISE:
LONGITUD
DE ONDA
EMITIDA:
CONFORME A
EN 60825-1
(2001)
CONFORME A
EN 60825-1
(2001)
CONFORME A
EN 60825-1
(2001)
ENTSPR. EN
60825-1 (2001)
ENGLISH
The following information is provided to comply with the rules imposed by international
authorities and refers to the correct use of your terminal.
STANDARD LASER SAFETY REGULATIONS
This product conforms to the applicable requirements of both CDRH 21 CFR 1040 and EN
60825-1 at the date of manufacture.
For installation, use and maintenance, it is not necessary to open the device.
Use of controls or adjustments or performance of procedures other than those specified herein may
result in exposure to hazardous visible laser light.
WARNING
The product utilizes a low-power laser diode. Although staring directly at the laser beam
momentarily causes no known biological damage, avoid staring at the beam as one would with
6
Gryphon™ D432/D412Plus
Compliance
any very strong light source, such as the sun. Avoid allowing the laser beam to hit the eye of an
observer, even through reflective surfaces such as mirrors, etc.
ITALIANO
Le seguenti informazioni vengono fornite dietro direttive delle autorità internazionali e si
riferiscono all’uso corretto del terminale.
NORMATIVE STANDARD PER LA SICUREZZA LASER
Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla data di
produzione: CDRH 21 CFR 1040 e EN 60825-1.
Non si rende mai necessario aprire l’appa-recchio per motivi di installazione, utilizzo o
manutenzione.
L'utilizzo di procedure o regolazioni differenti da quelle descritte nella documentazione può provocare un'esposizione pericolosa a luce laser visibile.
ATTENZIONE
Il prodotto utilizza un diodo laser a bassa potenza. Sebbene non siano noti danni riportati
dall’occhio umano in seguito ad una esposizione di breve durata, evitare di fissare il raggio laser
così come si eviterebbe qualsiasi altra sorgente di luminosità intensa, ad esempio il sole. Evitare
inoltre di dirigere il raggio laser negli occhi di un osservatore, anche attraverso superfici
riflettenti come gli specchi.
DEUTSCH
Die folgenden Informationen stimmen mit den Sicherheitshinweisen überein, die von
internationalen Behörden auferlegt wurden, und sie beziehen sich auf den korrekten Gebrauch
vom Terminal.
NORM FÜR DIE LASERSICHERHEIT
Dies Produkt entspricht am Tag der Herstellung den gültigen EN 60825-1 und CDRH 21
CFR 1040 Normen für die Lasersicherheit.
Es ist nicht notwendig, das Gerät wegen Betrieb oder Installations-, und Wartungs-arbeiten zu
öffnen.
Jegliche Änderungen am Gerät sowie Vorgehensweisen, die nicht in dieser Betriebsanleitung beschreiben werden, können ein gefährliches Laserlicht verursachen.
ACHTUNG
Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit keine Augenschäden von kurzen
Einstrahlungen bekannt sind, sollten Sie es vermeiden für längere Zeit in den Laserstrahl zu
schauen, genauso wenig wie in starke Lichtquellen (z.B. die Sonne). Vermeiden Sie es, den
Laserstrahl weder gegen die Augen eines Beobachters, noch gegen reflektierende Oberflächen zu
richten.
FRANÇAIS
Les informations suivantes sont fournies selon les règles fixées par les autorités internationales et
se réfèrent à une correcte utilisation du terminal.
Product Reference Guide
7
NORMES DE SECURITE LASER
Ce produit est conforme aux normes de sécurité laser en vigueur à sa date de fabrication: CDRH
21 CFR 1040 et EN 60825-1.
Il n’est pas nécessaire d’ouvrir l’appareil pour l’installation, l’utilisation ou l’entretien.
L'utilisation de procédures ou réglages différents de ceux donnés ici peut entraîner une dangereuse
exposition à lumière laser visible.
ATTENTION
Le produit utilise une diode laser. Aucun dommage aux yeux humains n’a été constaté à la suite
d’une exposition au rayon laser. Eviter de regarder fixement le rayon, comme toute autre source
lumineuse intense telle que le soleil. Eviter aussi de diriger le rayon vers les yeux d’un
observateur, même à travers des surfaces réfléchissantes (miroirs, par exemple).
ESPAÑOL
Las informaciones siguientes son presentadas en conformidad con las disposiciones de las
autoridades internacionales y se refieren al uso correcto del terminal.
NORMATIVAS ESTÁNDAR PARA LA SEGURIDAD LÁSER
Este aparato resulta conforme a las normativas vigentes de seguridad láser a la fecha de
producción: CDRH 21 CFR 1040 y EN 60825-1.
No es necesario abrir el aparato para la instalación, la utilización o la manutención.
La utilización de procedimientos o regulaciones diferentes de aquellas describidas en la documentación puede causar una exposición peligrosa a la luz láser visible.
ATENCION
El aparato utiliza un diodo láser a baja potencia. No son notorios daños a los ojos humanos a
consecuencia de una exposición de corta duración. Eviten de mirar fijo el rayo láser así como
evitarían cualquiera otra fuente de luminosidad intensa, por ejemplo el sol. Además, eviten de
dirigir el rayo láser hacia los ojos de un observador, también a través de superficies reflectantes
como los espejos.
The Gryphon D432/D412Plus Hand-Held Reader is not user-serviceable. Opening the case of the unit
can cause internal damage and will void the warranty.
CAUTION
8
Gryphon™ D432/D412Plus
Compliance
WEEE Compliance
Waste Electrical and Electronic Equipment (WEEE) Statement
English
For information about the disposal of Waste Electrical and Electronic Equipment (WEEE),
please refer to the website at www.scanning.datalogic.com.
Italian
Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche consultare il
sito Web www.scanning.datalogic.com.
German
Informationen zur Entsorgung von Elektro- und Elektronik- Altgeräten (WEEE) erhalten Sie
auf der Webseite www.scanning.datalogic.com.
French
Pour toute information relative à l’élimination des déchets électroniques (WEEE), veuillez
consulter le site Internet www.scanning.datalogic.com.
Spanish
Si desea información acerca de los procedimientos para el desecho de los residuos del equipo
eléctrico y electrónico (WEEE), visite la página Web www.scanning.datalogic.com.
Portuguese
Para informações sobre a disposição de Sucatagem de Equipamentos Eléctricos e Eletrônicos
(WEEE - Waste Electrical and Electronic Equipment), consultar o site web
www.scanning.datalogic.com.
Chinese
有关处理废弃电气电子设备 (WEEE) 的信息, 请参考 Datalogic 公司的网站:
http://www.scanning.datalogic.com/。
Japanese
廃電気電子機器 (WEEE) の処理についての関連事項は Datalogic のサイト
www.scanning.datalogic.com, をご参照下さい。
Product Reference Guide
9
Power Supply
This device is intended to be supplied by a UL Listed or CSA Certified Power Unit marked
"Class 2" or "LPS" output rated 5-30 V, minimum 0.75 A (Gryphon 412Plus) or 5V, 0.6 A
(Gryphon 432) which supplies power directly to the scanner via the jack connector on the
cable.
Service and Support
Datalogic provides several services as well as technical support through its website. Log on to
www.scanning.datalogic.com and click on the links indicated for further information including:
PRODUCTS
Search through the links to arrive at your product page where you can download specific
Manuals and Software & Utilities including:
• Datalogic Aladdin™, a multi-platform utility program that allows device configuration
using a PC. It provides RS-232 interface configuration as well as configuration barcode
printing.
SERVICE & SUPPORT
•
•
•
•
Technical Support - Product documentation and programming guides and Technical Support Department in the world
Service Programs - Warranty Extensions and Maintenance Agreements
Repair Services - Flat Rate Repairs and Return Material Authorization (RMA) Repairs.
Downloads – Manuals & Documentation, Data Sheets, Product Catalogues, etc.
CONTACT US
Information Request Form and Sales & Service Network
10
Gryphon™ D432/D412Plus
Chapter 1
Introduction
Gryphon D432/D412Plus Family Description
The Gryphon D432/D412Plus Family Hand-Held Reader packs a lot of performance into an
attractive, rugged, hand-held device. It operates in commercial and industrial environments as
well as the front office.
Omni-directional
Operating
To read a symbol or capture an image, you simply aim the reader and pull the trigger. Since Gryphon
D432/D412Plus Family is a powerful omni-directional reader, the orientation of the symbol is not
important.
Decoding
and
Imaging
Thanks to powerful algorithms, Gryphon D432/D412Plus reliably decodes all major 1D (linear) barcodes, 2D stacked codes (such as PDF417), 2D matrix symbols (such as DataMatrix), postal codes (such as
POSTNET, PLANET). The data stream — acquired from decoding a symbol — is rapidly sent to the host.
The reader is immediately available to read another symbol.
Gryphon D432/D412Plus can also function as a camera by capturing images of labels, signatures,
and other items.
FLASH MEMORY
Flash technology allows you to upgrade the Gryphon D432/D412Plus reader as new symbologies are
supported or as improved decoding algorithms become available.
USA Driver License
Parsing
The Gryphon D432/D412Plus reader can be set up to select and output a subset of data elements
from USA Driver License PDF417 barcodes. This feature can be enabled using either Datalogic Aladdin™ or the barcodes in the USA Driver License Parsing Quick Reference Guide (QRG), available on
the Datalogic website.
Package Contents
The following parts are included in the Gryphon D432/D412Plus package contents:
• Gryphon D432/D412Plus Hand-Held Reader
• Gryphon D432/D412Plus Quick Reference Manual
You may want to save your packing material in case you need to ship the reader at some later
time.
Product Reference Guide
11
Introduction
Configuration Methods
Reading Configuration Codes
This manual can be used for complete setup and configuration. If you wish to change the
default settings, you can configure the Gryphon D432/D412Plus reader by reading the
programming code symbols in this manual. Configuration commands and their relative
arguments are read individually using the symbols in this manual. See Appendix D.
Using Datalogic Aladdin™
The Datalogic Aladdin™ program, available for download from the Datalogic Web site, allows
programming the reader by selecting configuration commands or printing them through a userfriendly graphical interface running on the PC. These commands are sent to the reader over the
current communication interface, or they can be printed to be read.
Sending Configuration Strings from Host
An alternative configuration method is provided in Appendix A using the RS-232 or USB
COM interface. This method is particularly useful when many devices need to be configured
with the same settings. Batch files containing the desired parameter settings can be prepared to
configure devices quickly and easily.
The Gryphon D432/D412Plus reader incorporates a multi-standard interface, which can be
connected to a Host by plugging the correct interface cable into the connector and closing the
cable cover.
12
Gryphon™ D432/D412Plus
Chapter 2
Using the Gryphon D432/412Plus
Aiming System
The Gryphon D432/D412Plus reader uses an intelligent aiming system similar to those on
cameras. By partially pulling the trigger, the aiming system indicates a field of view to be
positioned over the code:
Figure 3. Aiming System
When you pull the trigger completely a red beam illuminates the code. If the aiming system is
centered and the entire symbology is within the aiming system, you will get a good read. The
field of view changes size as you move the reader closer or farther away from the code.
Figure 4. Relative Size and Location of Aiming System Pattern
Linear barcode
2D Matrix symbol
The field of view indicated by the aiming system will be smaller when the Gryphon D432/
D412Plus is closer to the code and larger when it is farther from the code. Symbologies with
smaller bars or elements (mil size) should be read closer to the unit. Symbologies with larger bars
Product Reference Guide
13
Using the Gryphon D432/412Plus
or elements (mil size) should be read farther from the unit. (See "Technical Features" starting on
page 119 for further details).
Normal Operation
Gryphon D432/D412Plus normally functions by capturing and decoding codes.
Point the reader at the target and pull the trigger partially to enable the aiming system. Then,
pull it completely to capture and decode the image. The reader will repeatedly flash until the
symbol is decoded or timeout is reached. In between the flashes of the reader, the aiming system
keeps on showing the field of view on the target (see Figure 4 on page 13).
As you are reading code symbols, adjust the distance at which you are holding the reader.
The Gryphon D432/D412Plus hand-held reader aiming system is designed for general reading and decoding of 1D and 2D
symbols. Some variation in reading distance will occur due to narrow bar width and other factors.
If reading codes positioned on reflective surfaces, it may be necessary to tilt the reader with respect to the barcode.
14
Gryphon™ D432/D412Plus
Normal Operation
Image Capturing
Gryphon D432/D412Plus can also function as a camera by capturing images of labels,
signatures, and other items.
In order to capture an image, the user should read a Capture Image code (see page 80), then
point at the image subject and pull the trigger. This way, the image will be captured and sent to
the host PC. Gryphon D432/D412Plus then returns to normal operation. To capture another
image you must read another Capture Image Code of the same or a different Preset
Configuration.
You can use the aiming system to position the reader from the object (ensure the reader is about
centered over the target). Adjust the distance at which you are holding the reader (see Figure 4
on page 13).
If the RS-232 interface has been selected, the image will be transferred to the host PC via
XMODEM_1K protocol.
Image capturing is not available in Wedge and USB Keyboard Emulation interfaces and is not compatible with Autoscanning
nor when the Software trigger type is selected.
Up to four different and independent Image Presets can be defined (see page 81).
Basic Configuration Parameters
The Image file formats supported are: TIFF, JPEG (default).
The resolution available is 752 x 480 pixels.
For JPEG images it is possible to define the Image Quality level to address tradeoff between
image file size and quality.
Advanced Configuration Parameters
By default, for all Image Presets, the window has its original coordinates equal to zero, its width
equal to 752 pixels and its height to 480 pixels.
Brightness Adjustment is available in the range from –100% up to 100%, in steps of 1%.
Positive values shift the luminance up so that the image will result brighter. Default value is 0%,
meaning that no brightness adjustment is performed.
The same range of values (–100% up to 100%, in steps of 1%) is available for Contrast
Adjustment. Positive values will increase the contrast, so that dark and bright objects inside the
image will be better distinguishable. Default value is 0%, which means that no contrast
adjustment is performed.
You can set the Image Color Depth by selecting 256 gray levels (default), 16 gray levels, or 2
gray levels. Higher color depths yield larger image files. This option is ignored if the JPEG
format is selected, (256 gray levels only).
Product Reference Guide
15
Using the Gryphon D432/412Plus
Autoscanning
Normal Mode
Gryphon D432/D412Plus provides an autoscan command (see page 78), which when enabled,
causes the reader to scan continuously and to monitor the central zone of its reading area. In this
way, Gryphon D432/D412Plus is ready to capture any image (containing a potential code)
positioned on a uniform background.
The aiming system can be enabled to indicate the reading area of the potential code to be
captured. The illumination system can also be enabled when the ambient light conditions are
not sufficient to autodetect the potential code to be captured; furthermore, the illumination
system increases in intensity for an instant when capturing and decoding an image. A safety time
may be defined to prevent Gryphon D432/D412Plus from reading the same code repeatedly.
If the decoding is completed successfully, the reader starts monitoring the reading area again. In
case of decoding failure, Gryphon D432/D412Plus keeps on decoding until a potential code is
present in the central zone of the reading area.
Pattern Mode
The Autoscan pattern mode is particularly advised when reading barcodes positioned on a nonuniform background. In these cases Gryphon D432/D412Plus may perceive some elements of
the background as barcodes and start the decoding. To avoid this undesired effect, the Autoscan
Pattern Code is placed in the Gryphon D432/D412Plus reading area which prevents decoding.
Using this code as the background, code reading takes place normally by presenting desired
codes to be read over the Pattern Code. Between each code read, the Pattern Code must be
presented to the reader.
The Pattern Code can be printed from this manual (see Appendix D).
In case of low ambient light conditions, Gryphon D432/D412Plus automatically activates the
illumination system. If desired, the illumination system can be enabled so that it is always active.
Defining Data Formatting
The string of a decoded code to be sent to the host may be formatted as follows:
• defining simple data formatting (see page 48);
• defining advanced data formatting giving complete flexibility in changing the format of
data (see "Advanced Data Format"on page 91).
When both simple and advanced data formatting are selected the info is processed in the
following order:
1. The string of the decoded code is processed according to the advanced formatting rules;
2. The resulting string is processed according to the selection type rules of the simple data
formatting;
3. Character substitution is performed on the resulting string;
4. Character deletion is performed on the resulting string;
5. Code concatenation is performed;
16
Gryphon™ D432/D412Plus
Normal Operation
6. Code ID is attached to the resulting string;
7. Global headers and terminators are attached to the resulting string;
The codes to be sent to the host may also be selected or ordered depending on the following two
conditions:
• one code per scan: Gryphon D432/D412Plus sends the code being closest to the image
center. If the "Central Code Transmission" command is enabled, only the code containing
the image center will be transmitted (see page 77);
• all codes per scan: the codes to be sent to the host may be ordered either by length or by
symbology starting from the code being closest to the image center (see page 77). When
enabling both these criteria, codes belonging to the same symbology are sent to the host
depending on their length.
Concatenation
It is possible to concatenate up to 4 different codes, set their length and enable the intercode
delay between them (the intercode delay is set in the specific interface parameters. When
enabling the delay one or more global headers and terminators are added to the decoded data.
The concatenation procedure may occur in different ways depending on the number of codes to
be decoded per image.
One Code Per Scan
•
•
•
If the code resulting from the single decoding of an image belongs to one of the code families to be concatenated, it is saved to the Gryphon D432/D412Plus memory waiting for
other codes to complete the concatenation.
If the code belongs to the same family of a code previously saved, it overwrites the old one.
If the code resulting from the decoding does not belong to one of the code families to be
concatenated, it causes the concatenation failure and clears the temporary memory. If the
"Concatenation Failure Transmission" command is set to "Tx codes causing failure" (see
page 56), this code will be sent in the output message.
All Codes Per Scan
•
•
•
All codes resulting from the decoding of an image and belonging to one of the families to
be concatenated are saved to the Gryphon D432/D412Plus memory waiting for other
codes to complete the concatenation.
If one or more codes resulting from the decoding belong to the same family of codes previously saved, they overwrite the old ones.
When the image contains no code to be concatenated, the concatenation fails and the
reader temporary memory is cleared. If the "Concatenation Failure Transmission" command is set to "Tx codes causing failure" (see page 56), the codes causing the concatenation failure will be sent in the output message.
Product Reference Guide
17
Using the Gryphon D432/412Plus
NOTES
18
Gryphon™ D432/D412Plus
Chapter 3
Initial Setup
This procedure allows setting up the reader to operate with the default settings. Whenever you
need to change the default values refer to "Changing Default Settings" on page 30.
RS-232 Interface Selection
The Gryphon D432/D412Plus reader requires the RS-232 interface cable and the AC/DC
power adapter to be connected.
To install and configure your reader with the RS-232 interface, follow these instructions:
1. Make all system connections as shown:
2. Read the restore default parameter code below:
Restore Default
AMHKGPAOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALECHGIK
AKCBPJCJGIIJCMCFGPLCMMMNLK
AEFBJLBGMHPKMOGNKKNDPDMGGK
AAPHBAJIDGHPOJKEFPNCEACBHK
AFKFBKNGLGMOMELLGOPCMJFKIK
DDDDLDLLLDDLLLLDDDLDDLDLDL
3. Read the RS-232 interface selection code:
RS-232
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJAKFEHFKK
AMGNPJCJGIIJCMCEGJMHNDOLLK
AIFBJLBGMHPLNKECPCGMBBIBOK
AAPHBAJJDAAGMGKDDAOHBGGLHK
AEKFBONJCDDIECLFJIJKMCHLIK
DLDDLDLDLLDLLLLDLLDDDLDLLL
4. Power up your PC.
RS-232 is the default interface set at the factory.
Product Reference Guide
19
Initial Setup
Wedge Interface Selection
The Gryphon D432Plus reader requires the Wedge interface cable.
To install and configure your reader with the Wedge interface, follow these instructions:
1. Connect the cable to the Gryphon D432Plus reader and to the PC as shown:
2. Power up your PC.
3. Read the restore default parameter code below:
Restore Default
AMHKGPAOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALECHGIK
AKCBPJCJGIIJCMCFGPLCMMMNLK
AEFBJLBGMHPKMOGNKKNDPDMGGK
AAPHBAJIDGHPOJKEFPNCEACBHK
AFKFBKNGLGMOMELLGOPCMJFKIK
DDDDLDLLLDDLLLLDDDLDDLDLDL
4. Read the Wedge IBM AT interface selection code:
Wedge – IBM AT
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJALFAEHKK
AEONPJCJGIIJCMCEHPLLHLPPJK
AIFBJLBGMHPLNPDFHGDGFIBDOK
AAPHBAJJCGCOPJDIMBCEANODDK
AFKFBPPJPJCAALOIKIECIPIKLK
DDLDLDLDDLDLLLLDDDDDDLDLDL
USB Interface Selection
The Gryphon D432/D412Plus reader requires the USB interface cable and, if required, the
AC/DC power adapter to be connected.
The USB interface is compatible with:
Windows 98 (and later)
IBM POS for Windows
Mac OS 8.0 (and later)
4690 Operating System
Start-Up
As with all USB devices, upon connection, the Host performs several checks by communicating
with the Gryphon D432/D412Plus. During this phase the green LED on the Gryphon
D432/D412Plus reader blinks and normal operations are suspended. Two basic conditions
must be met before Gryphon D432/D412Plus is ready to read codes: the correct USB driver
must be loaded and sufficient power must be supplied to the reader.
For all systems, the correct USB driver for the default USB-KBD interface or the USB Generic
HID interface is included in the Host Operating System and will either be loaded automatically
20
Gryphon™ D432/D412Plus
USB Interface Selection
or will be suggested by the O.S. and should therefore be selected from the dialog box (the first
time only).
If the Host supplies sufficient power to the reader, the start-up phase ends correctly, the green
LED stops blinking and the reader emits the beep OK signal.
If the Host does not supply sufficient power to the reader, a dialog box will appear on the Host
and the reader will be blocked (green LED continues blinking). In this case, disconnect the USB
cable at the Host (green LED stops blinking), connect and power-up an external supply to USB
cable then reconnect the USB cable to the Host and close the dialog box. The reader emits the
beep OK signal. You can now read codes. At this point you can read the USB interface
configuration code according to your application. Load drivers from the O.S. (if requested).
When configuring the USB-COM interface or DLBulkUSB interface, the relevant files and
drivers must be installed and can be downloaded from the web site 
http://www.scanning.datalogic.com.
The reader is ready.
FIRST START-UP
Green LED b lin ks
Connect Gryphon™
D432/D412Plus to Host
1.
Load drivers
(if reques ted)
Green LED o ff
Disc onnec t reader
at H os t
Does a dialog
box appear
warning that Bus
power is not
sufficient?
YES
C onnec t external
power supply to
cable and power up
BEEP OK
NO
Green LED o ff - BEEP OK
Select desired USB
interface code
(USB-KBD is default)
Reconnect reader
c able to Hos t and
close dialog box
2.
Load drivers
(if reques ted)
R ead test codes .
Reader is READY
Successive start-ups will automatically recognize the previously loaded drivers. If external power
is used, verify that external power is already supplied.
SUCCESSIVE START-UPS
Connect Gryphon™
D432/D412Plus to Host
Gr een LED blinks
Dis connect reader at Hos t
YES
Connect ex ternal power supply to
cable and power up
Does a dialog box
appear warning
that Bus power is
not sufficient?
NO
G reen LED o ff - BEEP O K
BEEP O K
Product Reference Guide
Rec onnect reader cable to
Host and close dialog box
Read tes t c odes.
Reader is READY
21
Initial Setup
To install and configure your reader with one of the USB interfaces, see the "First Start-up"
diagram above and follow these instructions.
1. Make all the Gryphon D432/D412Plus reader connections as shown:
USB Connections
2. Power up your PC.
3. Read the desired USB interface selection code:
22
USB-COM EMULATION
USB-KBD EMULATION
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJALEAGEKK
AMONPJCJGIIJCMCFHLPMOOKNBK
AIFBJLBGMHPLMLAMDPIKFBLBOK
AAPHBAJICHGNBKOPLNBGLPAHFK
AHKFBNPHFKLEAOHGLPKOGDJLLK
DLDDLDLDDLDLLLLDDDLDDLDLDL
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJAKEDBEKK
AMGNPJCJGIIJCMCFHMNJLBJPHK
AIFBJLBGMHPKNMBGMJOJEHHAOK
AAPHBAJICDHCJBCNKPCNNJNFHK
AFLFBMPJIKPAMFFBBHKCCKNIKK
DLLDLDLDLLDLLLLDDDDDDLDLLL
USB BULK
USB Generic HID
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJAKFDDHKK
AEGNPJCJGIIJCMCEHIJOCEMNPK
AIFBJLBGMHPKMICPIAFFEONCOK
AAPHBAJJCCDBHCPKNDBPGLDBBK
AHLFBOPHCJGEMAMPAAEOMGMJKK
DDDDLDLDLLDLLLLDDDLDDLDLLL
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJALEHCGKK
AEONPJCJGIIJCMCFGKKFBJILFK
AIFBJLBGMHPKNJGBENLDAOOCOK
AAPHBAJIDFFKKOLGFOOOMCFNDK
AELFBNNJFAOIIMAMCHHKGHCJJK
DDDDLDLDDLDLLLLDLLDDDLDLDL
Gryphon™ D432/D412Plus
USB Interface Selection
IBM PORT 9B/PORT 5B/IBM USB
*The IBM PORT 9B and IBM PORT 5B are only for Gryphon D412 + models.
1. Make all the Gryphon D432/D412Plus reader connections as shown:
2. Read the desired IBM interface selection codes:
IBM PORT 9B
IBM PORT 5B
AMHKHMFPHMGNEJEIEPANHOGOCK
AGPFONFCPKEOFMHMLJALEABEKK
AHCPLNCJGIIJCMCEHNPGDOEBCK
AAFBJLBGMHPKMPHKHIHFLPANKK
AAPHBAJICBFFGJNMEFIBBCHBBK
AGKFBILMPCDMDEFEFKKMEDKLLK
DLDDLDLDLDLLLLLDDLDDDLDLDL
AMHKHMFPHMGNEJEIEPANHOGOCK
AGPFONEDPKEOFMHMLJAKEFFHKK
AHCPLNCJGIIJCMCEHMLILIKJGK
AAFBJLBGMHPLNIFNPNEPPFMNKK
AAPHBAJJCCAFHGAJDDKJMHFFFK
AELFBINACDBGBBGHDPBAIMCLLK
DDDDLDLDDDLLLLLDLLLDDLDLDL
Gryphon D412 + models only
IBM USB
AMHKHMFOHNGNENEIEPANHOGOCK
AGOEPJAMDKEOFMHMLJAKECFEKK
AMONPJCJGIIJCMCFGMMHLFIFJK
AIFBJLBGMHPKMLBHKCCKPLJDOK
AAPHBAJIDDFDDLPAENDNINCJHK
AHKFBNJDHPIEOENLMJAAEBAIJK
DDDDLDLDLLLLLLLDDLLDDLDLLL
Product Reference Guide
23
Initial Setup
NOTES
24
Gryphon™ D432/D412Plus
Chapter 4
Configuration Using Code Symbols
This section describes the programming method of using configuration code symbols to
program your reader. By using the Gryphon D432/D412Plus reader to read/decode these
special configuration symbols, you can configure, and obtain information from its system
software.
When you are reading configuration code symbols, carefully aim the Gryphon D432/D412Plus
2D reader to avoid reading adjacent symbols.
The configuration code symbols in this chapter are divided into logical sections according to the
type of configuration required, (RS-232 configuration, Code selection, etc.). If arguments are
required with a command, you can read additional code labels (typically digits) from
Appendix D.
USA Driver License Parsing is a feature not covered in this manual. For more information, reference the “USA Driver License Parsing
Quick Reference Guide”, available on the Datalogic website at www.scanning.datalogic.com.
To configure your reader:
1. Read the Enter Configuration code ONCE, available on top of each page.
2. Modify the desired parameters in one or more sections by reading the parameter code and
selecting the value from the Hex/Numeric table (see Appendix D) or by following the
given procedures.
3. Read the Exit and Save Configuration code ONCE, available on top of each page.
Example for step 3
To set the maximum length of characters in a Code 39 barcode symbol that the reader will
decode to 32:
• first read the Maximum Length symbol for Code 39 on page 61
• then read the symbol for the digit "3" and lastly the symbol for the digit "2" in
Appendix D.
Product Reference Guide
25
Configuration Using Code Symbols
Default Settings
Configuration Field
Default Setting
RS-232 Communication
Baud Rate
115200
Parity, Data Bits, Stop Bits
No parity; 8 Data bits; 1 Stop bit
Handshake
None
ACK/NACK Protocol
None
FIFO
Enabled
Intercharacter Delay
0
Intercode Delay
0
RX Timeout
10 seconds
Serial Trigger Lock
Disabled
Serial Trigger Lock Disable Character
NUL
Serial Trigger Lock Enable Character
NUL
USB COM Emulation
Handshake
None
ACK/NACK Protocol
None
FIFO
Enabled
Intercharacter Delay
0
Intercode Delay
0
RX Timeout
10 seconds
USB Keyboard Emulation
FIFO
Enabled
Intercharacter Delay
0
Intercode Delay
0
*Keyboard Nationality
USA
*Keyboard Speed
Normal
WEDGE-Communication
*Keyboard Nationality
USA
CapsLock
OFF
CapsLock Auto-Recognition
ON
NumLock
OFF
Intercharacter Delay
0
Intercode Delay
0
IBM 46xx Interface DEFAULT SETTINGS
protocol= Port 5B 1520, format = IBM Standard Format, ignore =
Fake Scanner Configuration
IBM USB Interface DEFAULT SETTINGS
device usage, ignore = Fake Scanner Configuration
Handheld
* The default values of these parameters are set when reading the interface selection.
26
Gryphon™ D432/D412Plus
Default Settings
Configuration Field
Default Setting
Data Format-Symbology Independent Parameters
Code Identifier
Disabled
Custom Code Identifier
Disabled
Code Length
Disabled
*Header
No headers
*Terminator
CR and LF terminators for RS-232, USB BULK, USB COM, USB
Generic HID
ENTER terminator for Wedge, USB Kbd
Data Format-Symbology Dependent Parameters
Symbology Specific Format
Select All
Header Symbology
No headers
Terminator Symbology
No terminators
Symbology Character Substitution
No character to substitute
Symbology Character Deletion
No character to delete
Data Format-Concatenation
Concatenation
Disabled
Define Concatenation
2 EAN/UPC codes concatenated
Set First Concatenated Code Length
000 = any length
Set Second Concatenated Code Length
000 = any length
Set Third Concatenated Code Length
000 = any length
Set Fourth Concatenated Code Length
000 = any length
Concatenation with Intercode Delay
Disabled
Concatenation Timeout
10 seconds
Concatenation Failure Transmission
Tx codes causing failure
Transmission after Timeout
No code transmission
Concatenation Result Code ID
No code Identifier
Advanced Formatting
Format enable/disable
Disabled
Camera Control
Exposure Mode
Automatic, based on entire image
Power Save
Illumination System Power
ON
Code Selection
Issue Identical Codes
Enabled
EAN/UPC
Selection
Enabled
Add-On
Disabled
UPCE Expansion
Disabled
Code 39
Selection
Enabled - no check digit
Code 39 Full ASCII
Disabled
Code Length Check
Disabled
Product Reference Guide
27
Configuration Using Code Symbols
Configuration Field
Default Setting
Minimum Length
001
Maximum Length
255
Start/Stop Character
Disabled
Code 32
Selection
Disabled
Interleaved 2 of 5
Selection
Disabled
Code Length Check
Disabled
Minimum Length
014
Maximum Length
255
Codabar
Selection
Disabled
Code Length Check
Disabled
Minimum Length
001
Maximum Length
255
Code 128
Code128 Selection
Enabled
Code Length Check
Disabled
Minimum Length
001
Maximum Length
255
EAN 128
Selection
Disabled
Code Length Check
Disabled
Minimum Length
001
Maximum Length
255
Code 93
Selection
Disabled
Code Length Check
Disabled
Minimum Length
001
Maximum Length
255
PDF417
Selection
Enabled
Option
Macro PDF417 Buffered Mode
Micro PDF417
Disabled
GS1 DataBar™ Family
28
GS1 DataBar Expanded
Enabled
GS1 DataBar Limited
Enabled
GS1 DataBar Omnidirectional
Enabled
GS1 DataBar Expanded Stacked
Enabled
GS1 DataBar Stacked
Enabled
Gryphon™ D432/D412Plus
Default Settings
Configuration Field
Default Setting
Data Matrix
Selection
Enabled - normal & inverted
Rectangular Style
Enabled
Minimum Code Length
0001
Maximum Code Length
3600
QR
Selection
Enabled
Micro QR
Selection
Disabled
Postal Codes
Selection
Disabled
Australian Table
Selection
N Table
IMB
Selection
Disabled
Maxicode
Maxicode Mode 0
Disabled
Maxicode Mode 1
Disabled
Maxicode Mode 2
Disabled
Maxicode Mode 3
Disabled
Maxicode Mode 4
Disabled
Maxicode Mode 5
Disabled
Maxicode Mode 6
Disabled
Aztec
Selection
Disabled
Composite Codes
Selection
Disabled
Discard Linear Part
Enabled
Reading Parameters
Trigger Mode
Trigger level
Trigger Type
Normal trigger
Flash ON
2 sec
Flash OFF
2 sec
Beeper Tone
Tone 1
Beeper Volume
High volume
Beeper Duration
50 ms
Reads per Cycle
One read per cycle
Aiming System Delay
Disabled
Good Read Spot
Disabled
Scan Timeout
5 sec
User Defined Beeper Tone
Tone 1
User Defined Beeper Volume
High Volume
Product Reference Guide
29
Configuration Using Code Symbols
Configuration Field
Default Setting
User Defined Beeper Duration
100 ms
Codes per Scan
One code per scan
Central Code Transmission
Disabled
Order by Code Length
Disabled
Order by Code Symbology
Disabled
Autoscan Mode
Disabled
Autoscan Aiming System
Enabled
Autoscan Hardware Trigger
Enabled
Autoscan Illumination System
Disabled
Safety Time
500 ms (if Autoscan mode or Software trigger type is
selected and the Multiple Reads per Cycle option is enabled.
Stand AutoScan Mode
Normal
Image Formatting
Image Preset 1, 2, 3, 4
Image Format
JPEG format
Set JPEG Quality Factor
50
Brightness
0%
Contrast
0%
Color Depth
256 gray levels
Changing Default Settings
Once the reader is set up, you can change the default parameters to meet your application needs.
Refer to the preceding paragraphs for initial configuration in order to set the default values and
select the interface for your application.
In this manual the configuration parameters are divided into logical groups, making it easy to
find the desired function base in its reference group.
The RS-232, USB, WEDGE groups are for Standard Interface parameter configuration.
The following parameter groups are common to all interface applications:
• DATA FORMAT parameters regard the messages sent to the Host system.
• POWER SAVE parameters manage overall current consumption in the device.
• CODE SELECTION parameters allow configuration of a personalized mix of codes,
code families and their options.
• READING PARAMETERS control various operating modes and indicators status functioning.
• CAPTURE IMAGE parameters activate image capturing.
• ADVANCED CAPTURE IMAGE parameters define options of the image to capture.
• ADVANCED DATA FORMAT parameters allow advanced formatting of messages
towards the Host.
Once the configuration is modified, it is possible to save it as a Custom Default Configuration
and to restore it at any time using a specific command.
30
SAVE CUSTOM DEFAULT
RESTORE CUSTOM DEFAULT
AMHKGOBOFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEBDGIK
AKCBPJCJGIIJCMCFHOOBOFKHJK
AEFBJLBGMHPLMLBENPIJOBOEGK
AAPHBAJICAELBENPOIFJGNJBHK
AGKFBJKCGEBMMAEBJHEAKDILKK
DDDDLDLLLLDLLLLDLDLDDLDLLL
AMHKGOBOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEHBFIK
AKCBPJCJGIIJCMCFGPNNEKBJPK
AEFBJLBGMHPLMMGACKPFEHFFGK
AAPHBAJIDDAMENHAAFBFAFPDBK
AHKFBMLLKCCKGKAEDCDMCKPKIK
DDDDLDLLLLDLLLLDDDLDDLDLLL
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
RS-232 INTERFACE
RS-232 INTERFACE
BAUD RATE
1200 baud
2400 baud
AODOBPHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEAEHIK
AKCBPJCJGIIJCMCFGKKJKOJDJK
AEFBJLBGMHPLMKBDIAOJAOCFGK
AAPHBAJJDEBGGOGPJMMKGENDBK
AGKFAMOCFGFEOEMPKONGEDGLJK
DDDLLLLDDLLLLLLDLDLDDLDLDL
AODOBPHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFFEFIK
AKCBPJCJGIIJCMCEHMOCCMGBNK
AEFBJLBGMHPKNKGHFCHBECLHGK
AAPHBAJICAFOGLINMDNLINCNFK
AFKFAPIBAPGEIJIHHJLGAGJLIK
DDDLLLLDDLLLLLLDDDLDDLDLDL
4800 baud
9600 baud
AODOBPHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALFBDEIK
AKCBPJCJGIIJCMCEGJKDEHBFLK
AEFBJLBGMHPLMOFOMLCDNGPGGK
AAPHBAJICAGAPEPJLLEPPMPNFK
AGLFAOPPDHDGCAJLOLBOAEPJJK
DDLLLLLDDLLLLLLDDDDDDLDLLL
AODOBPHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJAKEEDGIK
AKCBPJCJGIIJCMCFHPOIMFOHPK
AEFBJLBGMHPKNOCKBJLLJKGEGK
AAPHBAJJDECIPBBLOEFOBFADBK
AFLFANJMGOAGENNDDMHOEBAJIK
DDLLLLLDDLLLLLLDLDDDDLDLLL
14400 baud
19200 baud
AODOBPHMHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJAKECBFIK
AKCBPJCJGIIJCMCFGONEGKFJJK
AEFBJLBGMHPKNJFOOMMHDMNFGK
AAPHBAJJCHGPKILEAJBCHNGBHK
AELFAIIFKIDAOHJGJJACMIHIKK
DDLLLLLDDLLLLLLDDDDDDLDLLL
AODOBPHMHNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALFHBHIK
AKCBPJCJGIIJCMCEHIJPOIKLNK
AEFBJLBGMHPLMJCKDOFPHAEHGK
AAPHBAJIDDCHKNFGFGADJEJPDK
AHLFALOGPBAAIKNOEOGCINIILK
DDLLLLLDDLLLLLLDLDDDDLDLLL
38400 baud
57600 baud
AODOBPGMHNGNENEIEPANHOGOCK
AHHPMJIMDKEOFMHMLJAKEGAGIK
AKCBPJCJGIIJCMCEHJMNMHBHNK
AEFBJLBGMHPLMJEFHPOOLLEGGK
AAPHBAJJDEELFPOLNABGHGBJBK
AHKFAPKHDDAKGGJMLDOCGOJIJK
DLLLLLLDLLDLLLLDDLDDDLDLLL
AODOBPGMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFDAEIK
AKCBPJCJGIIJCMCFGPIGEFOFJK
AEFBJLBGMHPKNJDBKNHGPHNEGK
AAPHBAJICAADFKAJIPAHJPOHFK
AEKFAMMEGKDKALNEGEICCLGIIK
DLLLLLLDLLDLLLLDLLDDDLDLLL
115200 baud
AODOBPGMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFFCHIK
AKCBPJCJGIIJCMCFHOLKOKFLPK
AEFBJLBGMHPKNOEFFIAKFBGFGK
AAPHBAJIDDEEADKGGCELPHIFDK
AFKFAJNNKMAMKBJBMBPOKCBJKK
DLLLLLLDLLDLLLLDDLDDDLDLLL
Product Reference Guide
31
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
RS-232 INTERFACE
PARITY
None
Odd
AODOCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEHDEIK
AKCBPJCJGIIJCMCFHKNICLPJPK
AEFBJLBGMHPKMKCBGHIFAIHGGK
AAPHBAJICBECCPIFDALHLEPDBK
AHKFAKNLOFKOENMPPBAEMFGLKK
DLLLLLLDDDLLLLLDDLLDDLDLDL
AODOCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEBBHIK
AKCBPJCJGIIJCMCFGLOEIEEHJK
AEFBJLBGMHPKMNFFJCPJKOMHGK
AAPHBAJIDCAFHGCKNNPLNMJBHK
AGKFAPMCCDJIOHIKFEHIEMBKIK
DLLLLLLDDDLLLLLDLLLDDLDLDL
Even
AODOCKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFEBFIK
AKCBPJCJGIIJCMCEHNKPAGLFNK
AEFBJLBGMHPLNNCBEAGBOCFFGK
AAPHBAJJCGENHDMIICOKDFGPDK
AFKFAMKBHKKIIKMCIDBIAJOKJK
DLLLLLLDDDLLLLLDDLLDDLDLDL
DATA BITS
7 Bits
8 Bits
AODKGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFGHFIK
AKCBPJCJGIIJCMCEHMNLNAOLPK
AEFBJLBGMHPLNNCDILOHNKLGGK
AAPHBAJICBAGNCCMNKDBECODFK
AFKFAMPJFJLIGJIGMPLCONMJKK
DLLLLLLDDDDLLLLDDLLDDLDLLL
AODKGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFAFGIK
AKCBPJCJGIIJCMCEGNOHHPFFJK
AEFBJLBGMHPLNKFHHOJLHMAHGK
AAPHBAJIDCEBILIDDHHNCKIBDK
AEKFAJOAJPIOMDMDGKMOGELIIK
DLLLLLLDDDDLLLLDLLLDDLDLLL
STOP BITS
1 Bit
2 Bits
AODKGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEDHFIK
AKCBPJCJGIIJCMCFGPJNAPDJLK
AEFBJLBGMHPLNPBLKBBJJBCEGK
AAPHBAJIDBEGBLCBDNBOCGFFDK
AEKFAMNDDBAAALDFGLGGCILLKK
DDLLLLLDLLDLLLLDLLDDDLDLLL
AODKGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEFFGIK
AKCBPJCJGIIJCMCFHOKBKAIHNK
AEFBJLBGMHPLNIGPFEGFDHJFGK
AAPHBAJICCABECIONAFCEODHFK
AFKFAJMKPHDGKBHAMOBKKBMKIK
DDLLLLLDLLDLLLLDDLDDDLDLLL
ACK/NACK PROTOCOL
Disabled
Enabled
AODKGKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEBBHIK
AKCBPJCJGIIJCMCEGIPKHBNLJK
AEFBJLBGMHPLNPGMAAHBOHIFGK
AAPHBAJJDEDMBEFCELBBMOPPDK
AFLFAIPIECJKKHKLNFCCILOKJK
DDDLLLLDDLLLLLLDDDDDDLDLDL
AODKGKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEHDEIK
AKCBPJCJGIIJCMCEHJMGNOGFPK
AEFBJLBGMHPLNIBIPFANEBDEGK
AAPHBAJJCHHLENPNKGFNKGJNFK
AELFANOBIEKMANOOHAFOACJLLK
DDDLLLLDDLLLLLLDLDDDDLDLDL
See "ACK/NACK Protocol" on page 113 for details.
32
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
RS-232 INTERFACE
RX TIMEOUT
RX Timeout
Read a number in the range 
00-99, where:
AODKBPHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFFCFIK
AKCBPJCJGIIJCMCEGJNHKMOHPK
AEFBJLBGMHPLMOFHAGONLNCEGK
AAPHBAJJDFAAALCKIJIBHMDDFK
AFKFAMNLMCOCGLMJDCDIENPLKK
DLLLLLLDLLDLLLLDLDDDDLDLLL
00= disabled
01-99= timeout from 1 to 99
secs
See "RX Timeout" on page 113 for details.
SERIAL TRIGGER LOCK
Disabled
Enabled
AODPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEHCEIK
AKCBPJCJGIIJCMCEGPPNPFEFLK
AEFBJLBGMHPLNIHIDCFKGICHGK
AAPHBAJICFBGACOMKGOJHNKLFK
AEKFANPJPMFEGKBGFLJOMIIIIK
DLLLDLLDLDDLLLLDDDDDDLDLLL
AODPCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEBAHIK
AKCBPJCJGIIJCMCEHOMBFKPLNK
AEFBJLBGMHPLNPAMMHCGMOJGGK
AAPHBAJIDGFBFLEDELKFBFMJDK
AFKFAIOADKGCMAFDPOOCEBPJKK
DLLLDLLDLDDLLLLDLDDDDLDLLL
Serial Trigger Lock Characters
AODPBPHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALECBEIK
AKCBPJCJGIIJCMCEHPIIHPBDJK
AEFBJLBGMHPLNMDILLMPNGGGGK
AAPHBAJJCFDBCKNFCGKGNLLLHK
AHKFAMOAEIMMICHOFAFOONGIIK
DDDLDLLDLDLLLLLDLLDDDLDLDL
Read two characters for Serial Trigger Lock/
Unlock.
The 2 characters must be read sequentially as
Hex values from the Hex/Numeric table.
Valid values are in the range 00-FF
HANDSHAKE
Product Reference Guide
None
XON/XOFF
AODKGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFEBHIK
AKCBPJCJGIIJCMCFHLLMKOAJNK
AEFBJLBGMHPLNNFECKIPKMBHGK
AAPHBAJJCEHMNNFPKMDOKKEJFK
AELFAINCCKCCMFBIHBPGEOJIJK
DLDLLLLDLDLLLLLDLDLDDLDLDL
AODKGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFCDEIK
AKCBPJCJGIIJCMCFGKIAABLHLK
AEFBJLBGMHPLNKCANPPDAKKGGK
AAPHBAJJDHDLIEPAEBHCMCCLDK
AFLFANMLOMBEGPFNNEIKMHOJLK
DLDLLLLDLDLLLLLDDDLDDLDLDL
RTS/CTS
RTS Always On
AODKGKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEHDGIK
AKCBPJCJGIIJCMCEHMMLIDEFPK
AEFBJLBGMHPKMKFEANGLEGDEGK
AAPHBAJICDHDIBBCBOGDCLNFHK
AGLFAOKILFCEACBFADOKICBJKK
DLDLLLLDLDLLLLLDLDLDDLDLDL
AODKGKHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKEDEHIK
AKCBPJCJGIIJCMCEGJIKOIDBJK
AEFBJLBGMHPLNOGNJEDJNCHFGK
AAPHBAJICDENBOGGGGPHFKAFHK
AFKFAPNGINHGKLAJJBECIAHLLK
DLLLLLLDLDLLLLLDLDDDDLDLLL
33
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
RS-232 INTERFACE
FIFO
Disabled
Enabled
AODKGKFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEHEEIK
AKCBPJCJGIIJCMCFHKPBPDILLK
AEFBJLBGMHPLMKFOFBKAHDNHGK
AAPHBAJJDDHLEHJBMCFNGJDNHK
AGKFAILCKNMOEJCKPGAMODCKIK
DLDLLLLDLLDLLLLDLDDDDLDLLL
AODKGKFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEBGHIK
AKCBPJCJGIIJCMCFGLMNFMDFNK
AEFBJLBGMHPLMNCKKENMNFGGGK
AAPHBAJJCADMBODOCPBBABFPBK
AHKFANKLGLPIODGPFDHAGKFLKK
DLDLLLLDLLDLLLLDDDDDDLDLLL
INTERCHARACTER DELAY
Intercharacter Delay
AODKBPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEACFIK
AKCBPJCJGIIJCMCFHKJBHDDFLK
AEFBJLBGMHPLMMGPCMBDPGLGGK
AAPHBAJJCFEAMCCHGOKOBIIFDK
AEKFAMPBKKFKAJHKJGOMIIIJKK
DDLLLLLDDDDLLLLDDDLDDLDLLL
00
= disabled
01-99 = delay from 1 to 99
msec
INTERCODE DELAY
Intercode Delay
AODKBPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFDHGIK
AKCBPJCJGIIJCMCFHLNMCOLHNK
AEFBJLBGMHPLNLGFFHDMCJHGGK
AAPHBAJJDCEHFIOJAAMNNLPBBK
AGLFAMJBCNLGIFEIBBBGCFDLLK
DDLLLLLDDLLLLLLDDDDDDLDLDL
34
00
= disabled
01-99 = delay from 1 to 99
sec
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
USB
USB
USB COM Emulation
HANDSHAKE
None
XON/XOFF
AOALGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFDBFIK
AKCBPJCJGIIJCMCEHONJKCAFPK
AEFBJLBGMHPKMMEGABIEOIJGGK
AAPHBAJICGEOOFKLJMHMGMPDFK
AGLFAJIKEDPOKPPMNLCCCFGIJK
DLLLLLLDDLDLLLLDDDLDDLDLLL
AOALGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFFDGIK
AKCBPJCJGIIJCMCEGPOFANLLJK
AEFBJLBGMHPKMLDCPEPIEOCHGK
AAPHBAJIDFAJLMAEHBDAAEJBDK
AHLFAMJDIFMIAFLJHOFOKMBJLK
DLLLLLLDDLDLLLLDLDLDDLDLLL
RTS/CTS
AOALGKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEADEIK
AKCBPJCJGIIJCMCFHJKOIPEJNK
AEFBJLBGMHPLNLEGCGGAACLFGK
AAPHBAJJCBEBLJOGCOCBONGPHK
AELFAPPANMPIGIPBKJDOOJOJKK
DLLLLLLDDLDLLLLDDDLDDLDLLL
ACK/NACK PROTOCOL
Disabled
Enabled
AOALGKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEGBFIK
AKCBPJCJGIIJCMCFGNJPHNNHLK
AEFBJLBGMHPKMOHOCLHKKDAEGK
AAPHBAJIDGAOCMKGHLFDAIEFDK
AHLFAJKACLEGMNEPHPPGOABKJK
DDLLLLLDLDDLLLLDLDDDDLDLLL
AOALGKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEADGIK
AKCBPJCJGIIJCMCFHMKDNCGJNK
AEFBJLBGMHPKMJAKNOAGAFLFGK
AAPHBAJICFEJHFAJJGBPGACHFK
AGLFAMLJONHAGHAKNKIKGJGLLK
DDLLLLLDLDDLLLLDDDDDDLDLLL
See "ACK/NACK Protocol" on page 113 for details.
FIFO
Disabled
Enabled
AOALGKFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEAEGIK
AKCBPJCJGIIJCMCEHPJEPPIHJK
AEFBJLBGMHPKNLEMHKKLDHFGGK
AAPHBAJIDBEJHPGFPCBPKPIHHK
AEKFAJOKMEBCCDMOFMNIIINKIK
DLLLLLLDDDLLLLLDDDDDDLDLDL
AOALGKFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEGGFIK
AKCBPJCJGIIJCMCEGOKIFADJPK
AEFBJLBGMHPKNMDIIPNHJBOHGK
AAPHBAJICCAOCGMKBPFDMHOFBK
AFKFAMPDACCEIJILPJKEABKLKK
DLLLLLLDDDLLLLLDLDDDDLDLDL
INTERCHARACTER DELAY
Intercharacter Delay
AOALBPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEHCHIK
AKCBPJCJGIIJCMCEHPPEHPDJJK
AEFBJLBGMHPKNNHNAHBILCDHGK
AAPHBAJICHHCPKNDFOOMNODPDK
AGKFANKJMDIGGDJODMDIODHJKK
DDDLLLLDLLLLLLLDLDLDDLDLDL
Product Reference Guide
00
= disabled
01-99 = delay from 1 to 99
msec
35
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
USB
INTERCODE DELAY
Intercode Delay
AOALBPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFEHEIK
AKCBPJCJGIIJCMCEHOLJCCLLPK
AEFBJLBGMHPKMKHHHMDHGNPHGK
AAPHBAJIDAHFGABNDAIPBNELBK
AELFANMJEEGKOPKMLLMCEOMLLK
DDDLLLLDLDDLLLLDLDDDDLDLLL
00
= disabled
01-99 = delay from 1 to 99
sec
RX TIMEOUT
RX Timeout
AODKBPHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFFCFIK
AKCBPJCJGIIJCMCEGJNHKMOHPK
AEFBJLBGMHPLMOFHAGONLNCEGK
AAPHBAJJDFAAALCKIJIBHMDDFK
AFKFAMNLMCOCGLMJDCDIENPLKK
DLLLLLLDLLDLLLLDLDDDDLDLLL
Read a number in the range 
00-99, where:
00= disabled
01-99= timeout from 1 to 99
secs
See "RX Timeout" on page 113 for details.
36
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
USB
USB Keyboard Emulation
FIFO
Disabled
Enabled
AOAPGKFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALECDEIK
AKCBPJCJGIIJCMCEHJJOKGPNLK
AEFBJLBGMHPLMPBJKCBJCCEFGK
AAPHBAJICBGIEIKMBJAMEMFDFK
AHLFAJLKDIKCEOHGFFIACHKIKK
DDDLLDLDDDLLLLLDLDDDDLDLLL
AOAPGKFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEEBHIK
AKCBPJCJGIIJCMCEGIKCAJEDNK
AEFBJLBGMHPLMIGNFHGFIEPEGK
AAPHBAJIDCCPBBADPEEACEDBDK
AGLFAMKDPOJEOEDDPAPMKONJIK
DDDLLDLDDDLLLLLDDDDDDLDLLL
INTERCHARACTER DELAY
Intercharacter Delay
AOAPFLHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFEFHIK
AKCBPJCJGIIJCMCEGIKGHBCJPK
AEFBJLBGMHPLNMFDFAKDEDMEGK
AAPHBAJJDGEIPKFLPHCACJDHFK
AGKFAIMDALNGCKCMNJLKKPPKLK
DLLLLDLDDLLLLLLDDLLDDLDLLL
00
= disabled
01-99 = delay from 1 to 99
msec
INTERCODE DELAY
Intercode Delay
AOAPFLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEBFHIK
AKCBPJCJGIIJCMCFHLOAKOPLLK
AEFBJLBGMHPLNOGLHKFNAIFGGK
AAPHBAJJCGAIDDFGBAAPENIBDK
AHKFAIOJGDGOEIJPHNGOGKIILK
DDLLLDLDLDLLLLLDLLDDDLDLLL
Product Reference Guide
00
= disabled
01-99
= delay from 1 to 99
sec
37
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
USB
KEYBOARD NATIONALITY
This parameter default value is restored through the Interface Selection code and not Restore
Default.
Belgian
English
AOAPCOGMHNGNENEIEPANHOGOCK
AHHPMJIMDKEOFMHMLJAKFFAHIK
AKCBPJCJGIIJCMCEHIJFLFPNPK
AEFBJLBGMHPLMLHCHGLKEBCFGK
AAPHBAJJDECOEEAFHDAPIFOFDK
AHLFAKJGEAHOKMOLCCDMAIBLKK
DDLLLDLDLDLLLLLDDDLDDLDLLL
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJAKFHDHIK
AKCBPJCJGIIJCMCFHOLALHANNK
AEFBJLBGMHPKNMBNBAOPGAAHGK
AAPHBAJJDEENOKPFEHEHOGPPDK
AFKFAIKNBNHCIHKEKNKACHIKLK
DLLLLDLDDDDLLLLDLLLDDLDLLL
French
German
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEGEEIK
AKCBPJCJGIIJCMCEHNLKFOILPK
AEFBJLBGMHPKNIFAFLCFLINEGK
AAPHBAJICADLHAGDGAMCHONBHK
AFLFAKLAHMBAEDPAOIGIGABILK
DLDLLDLDDDDLLLLDDLDDDLDLDL
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALECDFIK
AKCBPJCJGIIJCMCEGIPLDFPPJK
AEFBJLBGMHPLMMGJMCHHCMJFGK
AAPHBAJICAAFOPBHBIFGAPABHK
AGKFALMOEEECOKOMHKMAGCHKKK
DLLLLDLDDDDLLLLDDLLDDLDLLL
Italian
Japanese
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFDEGIK
AKCBPJCJGIIJCMCFGLPBNMHJLK
AEFBJLBGMHPLMICEIJLNPEEGGK
AAPHBAJJDEHDHFIBDPNDJHCPDK
AGLFAJNDCFCACOLIDPAICFOIKK
DLDLLDLDDDDLLLLDLLDDDLDLDL
AOAPCOGMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEAAFIK
AKCBPJCJGIIJCMCFGONODHAPLK
AEFBJLBGMHPKNLAGKECCANLHGK
AAPHBAJICAGGEBOHCMBOGMBLHK
AELFAJPFBJEOMBKDPFFMENOLLK
DDLLLDLDLDLLLLLDLDLDDLDLLL
Spanish
Swedish
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEEBGIK
AKCBPJCJGIIJCMCEHJMHJKEBPK
AEFBJLBGMHPLMLBNDHALIKCEGK
AAPHBAJIDDECLGLIPFBKGHGDBK
AHKFAONHICHEEAKJNPLMOLALIK
DLLLLDLDDDDLLLLDLLLDDLDLLL
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJAKFBBEIK
AKCBPJCJGIIJCMCFGPIMBILDLK
AEFBJLBGMHPKNLGJOFJDMGLGGK
AAPHBAJJCHAKLDFKKKALIOJNFK
AEKFANLENLEECNOBAINMKOPLJK
DLLLLDLDDDDLLLLDDLLDDLDLLL
USA
AOAPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFFGFIK
AKCBPJCJGIIJCMCFHKMNHDMHNK
AEFBJLBGMHPLMPFAHMMBFCPHGK
AAPHBAJJCHDECMCONCJPPPENFK
AHLFAMMKODBGIEPNJKHEKMJJIK
DLDLLDLDDDDLLLLDDLDDDLDLDL
38
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
USB
KEYBOARD SPEED
This parameter default value is restored through the Interface Selection code and not Restore
Default.
Normal
Fast
AOAPBPGMFNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALEBGHIK
AKCBPJCJGIIJCMCEGJIEPKNDJK
AEFBJLBGMHPLNNDGIDBCOOAEGK
AAPHBAJJDEHOFMOFDGMGKIAJFK
AFLFAJNANAPEGCNKPFNGOKFKLK
DDDLLDLDLDDLLLLDLDLDDLDLLL
AOAPBPHMFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFAHGIK
AKCBPJCJGIIJCMCEGINGNFGPJK
AEFBJLBGMHPLNNFJMCKDCFAFGK
AAPHBAJIDDBCKOFILANDEKIPHK
AFKFANJBBCPOIOJIAIFGAJEKJK
DLDLLDLDDDLLLLLDDLLDDLDLLL
After setting the Keyboard Speed, it is necessary to disconnect and reconnect the USB cable to the PC.
See "Keyboard Speed" on page 113 for details.
Product Reference Guide
39
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
USB
USB IBM
TableTop
HandHeld
IGNORE HOST COMMAND
The Ignore Host Command can also be used for the IBM 46XX interface.
Disable
Ignore Host
Fake Scanner Configuration
Magellan SL Compatibility
IBM 46XX
PROTOCOL
Port 9B (4501)
Port 5B (1520)
FORMAT
Code 39
Mixed
IBM Standard
40
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
WEDGE INTERFACE
WEDGE INTERFACE
CAPS LOCK
Caps Lock Off
Caps Lock On
AOCOCOFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEEHFIK
AKCBPJCJGIIJCMCFHPJMFONJPK
AEFBJLBGMHPKMPEAEFKPFEBEGK
AAPHBAJJDDHLCANDMPHCNCFDHK
AFLFALKFFFDCEGMMLKJKOLEKJK
DDLLLLLDLLDLLLLDLDLDDLDLDL
AOCOCOFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKECFGIK
AKCBPJCJGIIJCMCFGOKAPBGHJK
AEFBJLBGMHPKMIDELANDPCKFGK
AAPHBAJJCADMHJHMCCDOLKDBBK
AELFAOLMJDAEOMIJBPOGGCDLLK
DDLLLLLDLLDLLLLDDDLDDLDLDL
CAPS LOCK AUTO-RECOGNITION
Disabled
Enabled
AOCKGOFOBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEHHGIK
AKCBPJCJGIIJCMCFGMIHHEGDPK
AEFBJLBGMHPKMNCOEGANBCAEGK
AAPHBAJICGHHLLJCDOLBAPHHBK
AGKFANMKJEKEKLMFDFKAEEPJIK
DLDLLLLDDDDLLLLDDLDDDLDLDL
AOCKGOFOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEBFFIK
AKCBPJCJGIIJCMCFHNLLNLNNJK
AEFBJLBGMHPKMKFKLDHBLELFGK
AAPHBAJIDFDAOCDNNDPNGHBFHK
AHKFAINDFCJCABIAJANMMNIIKK
DLDLLLLDDDDLLLLDLLDDDLDLDL
Caps lock manual configuration is ignored when Caps Lock Auto-Recognition
is enabled.
NUM LOCK
Num Lock Off
Num Lock On
AOCOCOFOFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFBHFIK
AKCBPJCJGIIJCMCEGMNKIBALLK
AEFBJLBGMHPKMNHIGPFBBPIGGK
AAPHBAJJCDDLOJNOCIFNLGOFBK
AELFALIPDNIKCEHPBOEOCODIJK
DLLLLLLDDDDLLLLDDDDDDLDLDL
AOCOCOFOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFHFGIK
AKCBPJCJGIIJCMCEHNOGCOLFNK
AEFBJLBGMHPKMKAMJKCNLJDHGK
AAPHBAJJDAHMLAHBMFBBNOIHHK
AFLFAOJGPLLMIODKLLDCKHEJLK
DLLLLLLDDDDLLLLDLDDDDLDLDL
INTERCHARACTER DELAY
Intercharacter Delay
AOCKFPFODNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALECEGIK
AKCBPJCJGIIJCMCFHMPCPODFNK
AEFBJLBGMHPKMJGOMPJIKMEFGK
AAPHBAJJCGFAJDKLLOPOKJGHDK
AFKFAMNDCADMEDKNDOGAGBBJIK
DDLLLLLDDDLLLLLDLDDDDLDLLL
00
= disabled
01-99
= delay from 1 to 99
msec
00
= disabled
01-99
= delay from 1 to 99
sec
INTERCODE DELAY
Intercode Delay
AOCKFPHMDNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFBBFIK
AKCBPJCJGIIJCMCFHNLPKDLHLK
AEFBJLBGMHPKNOGELELHHDIFGK
AAPHBAJJDBFHAJGFNAJNGKBDBK
AHLFAMLDKHNAMPJPLJJKMMKLJK
DDLLLLLDDLDLLLLDLDLDDLDLDL
Product Reference Guide
41
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
WEDGE INTERFACE
KEYBOARD NATIONALITY
This parameter default value is restored through the Interface Selection code and not Restore
Default.
Belgian
English
AOCOCOGMHNGNENEIEPANHOGOCK
AHHPMJIMDKEOFMHMLJAKFHEEIK
AKCBPJCJGIIJCMCEHMIJMFGBLK
AEFBJLBGMHPKNMGIDEPLJIAGGK
AAPHBAJJDHGGNCDGAAIBGLIPDK
AHKFANJJHBLGOCOIIFCIOCHKKK
DLDLLLLDDDDLLLLDLLLDDLDLDL
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJAKFFHEIK
AKCBPJCJGIIJCMCFHKKMMHJBJK
AEFBJLBGMHPLMLAHFCKOLJCEGK
AAPHBAJJDHAFHMMGDEMJAIJFDK
AFLFAPKCCMLKMJKHAKLEMNOLLK
DDDLLLLDLDLLLLLDDDLDDLDLDL
French
German
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEEAHIK
AKCBPJCJGIIJCMCEHJKGCOBHLK
AEFBJLBGMHPLMPEKBJGEGBPHGK
AAPHBAJICDHDOGFABDEMJALLHK
AFKFANLPENNIANPDEPHMIKHJLK
DDLLLLLDLDLLLLLDLDDDDLDLLL
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALEAHGIK
AKCBPJCJGIIJCMCEGMOHEFGDNK
AEFBJLBGMHPKNLHDIADGPFLGGK
AAPHBAJICDENHJCEGLNIOBGLHK
AGLFAMMBHFIKKEOPNNNEIIBLKK
DDDLLLLDLDLLLLLDLDLDDLDLDL
Italian
Japanese
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFBAFIK
AKCBPJCJGIIJCMCFGPONKMOFPK
AEFBJLBGMHPKNPDOMLPMCNGFGK
AAPHBAJJDHDLODLCEMFNHJEFDK
AGKFAONMBEOIGALLJIBMMPIJKK
DDLLLLLDLDLLLLLDDDDDDLDLLL
AOCOCOGMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALECEGIK
AKCBPJCJGIIJCMCFGKMCEHJDPK
AEFBJLBGMHPLMMBMOGGDNEJEGK
AAPHBAJICDCONHNEFPJAICHBHK
AEKFAOPKCIIGIPKAFCEIKHIKLK
DLDLLLLDDDDLLLLDDLLDDLDLDL
Spanish
Swedish
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEGFFIK
AKCBPJCJGIIJCMCEHNNLOKNNLK
AEFBJLBGMHPKNMAHHFEKFDAHGK
AAPHBAJIDAAKCAILIGJEIJAJBK
AHLFAJNILDLMAOKKHIKIABGKIK
DDDLLLLDLDLLLLLDDDLDDLDLDL
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJAKFDFHIK
AKCBPJCJGIIJCMCFGLJAGICPPK
AEFBJLBGMHPLMMHDKHNCBPJFGK
AAPHBAJJCEECCFGJNJIFGAPHFK
AELFAKLLOKIMGDOCKPMIEEJKJK
DDDLLLLDLDLLLLLDLDLDDLDLDL
USA
AOCOCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFHCGIK
AKCBPJCJGIIJCMCFHONBADFLJK
AEFBJLBGMHPKNIEKDOIAILNEGK
AAPHBAJJCEHMLKBNKBBBBBCHFK
AHKFALMFNCNOMKPODNGAEGPIIK
DDLLLLLDLDLLLLLDLDDDDLDLLL
42
Gryphon™ D432/D412Plus
Default Settings
KEYBOARD SETTING
The values set by this procedure are not effected by the Restore Default code but will be lost if
the Interface Selection code is read.
Set Alphanumeric Keys
AOCOBLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFHEIK
AKCBPJCJGIIJCMCFHKIFCIDNNK
AEFBJLBGMHPKNOEFDMIDAIKGGK
AAPHBAJJDBGBFEFKLAHODLCLBK
AELFAONNHNGEOMLLCMDAAFDLLK
DDLLLLLDLLLLLLLDDDLDDLDLLL
The reader can be used with terminals or PCs with various keyboard types and nationalities
through a simple keyboard setting procedure.
Keyboard setting consists of communicating to the reader how to send data corresponding to
the keyboard used in the application. The keys must be set in a specific order.
Press and release a key to set it.
Some characters may require more than one key pressed simultaneously during normal use
(refer to the manual of your PC or terminal for keyboard use). The exact sequence must be
indicated to the reader in this case pressing and releasing the different keys.
Example
If one has to press the "Shift" and "4" keys simultaneously on the keyboard to transmit the
character "$" to the video, to set the "$", press and release "Shift" then press and release "4".
Each pressed and released key must generate an acoustic signal on the reader, otherwise repress
the key. Never press more than one key at the same time, even if this corresponds to the normal
use of your keyboard.
Press "Backspace" to correct a wrong key entry. In this case the reader emits a wrong beep.
"CAPS LOCK" and "NUM LOCK" must be off before starting the keyboard setting procedure. "SHIFT" must be repressed for each character and cannot be
substituted by "CAPS LOCK".
1. Read the "Set Alphanumeric Keys" code.
2. Press the keys shown in Table 2 on page 44, according to their numerical order.
Some ASCII characters may be missing as this depends on the type of keyboard: these are
generally particular characters relative to the various national symbologies. In this case:
• The first 4 characters (Shift, Alt, Ctrl, and Backspace) can only be substituted with
keys not used, or substituted with each other.
• Characters can be substituted with other single symbols (e.g. "SPACE") even if not
included in the barcode set used.
• Characters can be substituted with others corresponding to your keyboard.
The reader signals the end of the procedure with 3 beeps indicating the keys
have been registered.
Product Reference Guide
43
Configuration Using Code Symbols
Table 2. Alphanumeric Keys
01 : Shift
02 : Alt
03 : Ctrl
04 : Backspace
05 : SPACE
06 : !
07 : "
08 : #
09 : $
10 : %
11 : &
12 : '
13 : (
14 : )
15 : *
16 : +
17 : ,
18 : 19 : .
20 : /
21 : 0
22 : 1
23 : 2
24 : 3
25 : 4
26 : 5
27 : 6
28 : 7
29 : 8
30 : 9
31 : :
32 : ;
33 : <
34 : =
35 : >
36 : ?
37 : @
38 : A
39 : B
40 : C
41 : D
42 : E
43 : F
44 : G
45 : H
46 : I
47 : J
48 : K
49 : L
50 : M
51 : N
52 : O
53 : P
54 : Q
55 : R
56 : S
57 : T
58 : U
59 : V
60 : W
61 : X
62 : Y
63 : Z
64 : [
65 : \
66 : ]
67 : ^
68 : _ (underscore)
69 : `
70 : {
71 : |
72 : }
73 : ~
74 : DEL
Acoustic Signals
Four types of acoustic signals are associated with the following steps:
1. Enter keyboard setup
2. Exit keyboard setup
3. SHIFT, ALT, CTRL, BACKSPACE keys
4. Keyboard keys (SHIFT, ALT, CTRL, BACKSPACE excluded)
These signals facilitate the selection of those characters requiring more than one key pressed
simultaneously.
Example:
The transmission of the "%" character implies two different steps:
1. Press the SHIFT key
2. Press the "5" key
The different tones produced by the reader indicate that both steps have been successful and
that the character has been transmitted.
44
Gryphon™ D432/D412Plus
Default Settings
Extended Header/Terminator Keys
For the WEDGE interface, the following extended keyboard values can also be configured.
These values are restored through the Interface Selection code and not Restore Default.
Table 3. Extended Keyboard to Hex Conversion Table
IBM AT
HEX
83
84
85
86
87
88
89
8A
8B
8C
8D
8E
8F
90
91
92
93
94
95
96
97
98
99
9A
9B
Product Reference Guide
KEY
ENTER
TAB
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
HOME
END
PG UP
PG DOWN
UP ARROW
DOWN ARROW
LEFT ARROW
RIGHT ARROW
ESC
CTRL (Right)
Euro
45
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
WEDGE INTERFACE
SET CUSTOM EXTENDED HEADER/TERMINATOR KEYS
Set Extended Keys
AOCOBLHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFAHEIK
AKCBPJCJGIIJCMCEGJMDPHOPJK
AEFBJLBGMHPKNMHNBGHNEDDEGK
AAPHBAJJCBCBJNFHFHFBFPJNHK
AFLFAOPHBFNMIOAIIIOEMAEJLK
DLLLLLLDDDLLLLLDLDDDDLDLLL
The extended Header/Terminator keys for Wedge Interface users can be customized by
defining them through a simple keyboard setting procedure.
For example, the Numeric Keypad keys can be set for use as Headers or Terminators by
substituting the default extended keys during this procedure.
Press and release a key to set it.
Some characters may require more than one key pressed simultaneously during normal use
(refer to the manual of your PC or terminal for keyboard use). The exact sequence must be
indicated to the reader in this case pressing and releasing the different keys.
Example
If one has to press the "Shift" and "4" keys simultaneously on the keyboard to transmit the
character "$" to the video, to set the "$", press and release "Shift" then press and release "4".
Each pressed and released key must generate an acoustic signal on the reader, otherwise repress
the key. Never press more than one key at the same time, even if this corresponds to the normal
use of your keyboard.
Press "Backspace" to correct a wrong key entry. In this case the reader emits a wrong beep.
Note: "CAPS LOCK" and "NUM LOCK" must be off before starting the keyboard setting
procedure. "SHIFT" must be repressed for each character and cannot be substituted by
"CAPS LOCK".
1. Read the "Set Extended Keys" code.
2. Press the first 4 keys indicated in Table 4 on page 47.
3. Define all keys from 5 to 28 in the following table.
If the first 4 KEYS (Shift, Alt, Ctrl, and Backspace) are not available on your keyboard,
you can only substitute them with keys not used, or substitute them with each other.
The reader signals the end of the procedure with 3 beeps, indicating the keys have been
registered.
46
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
WEDGE INTERFACE
Table 4. Custom Extended Keyboard Setttings
Order
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
HEX
83
84
85
86
87
88
89
8A
8B
8C
8D
8E
8F
90
91
92
93
94
95
96
97
98
99
9A
Custom
KEY
Shift
Alt
Ctrl
Backspace
Acoustic Signals
Four types of acoustic signals are associated with the following steps:
1. Enter keyboard setup
2. Exit keyboard setup
3. SHIFT, ALT, CTRL, BACKSPACE keys
4. Keyboard keys (SHIFT, ALT, CTRL, BACKSPACE excluded)
These signals facilitate the selection of those characters requiring more than one key pressed
simultaneously.
Example
The transmission of the "%" character implies two different steps:
1. Press the SHIFT key
2. Press the "5" key
The different tones produced by the reader indicate that both steps have been successful and
that the character has been transmitted.
Product Reference Guide
47
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
DATA FORMAT
The Data Format parameters can be restored to their default values using the following
methods:
1. The general “Restore Default” code restores all the configuration parameter groups
including Data Format to their default values, with the exception of the Symbology Independent Header and Terminator selections;
2. The “Data Format Default” code restores all the Data Format configuration parameters to
their default values, with the exception of the Symbology Independent Header and Terminator selections;
3. The Symbology Independent Header and Terminator parameters are set to their default
values when reading the interface selection code;
4. The “Symbology Specific Format Default” code restores only the configuration parameters of the specific symbology indicated by the Code Identifier code in Appendix C.
DATA FORMAT DEFAULT
Data Format Default
AOCPBLDKFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEGAFIK
AKCBPJCJGIIJCMCEHJKCFFCHPK
AEFBJLBGMHPKMNAJGLEGHEGGGK
AAPHBAJJCHEKKKMBGNHELADBDK
AEKFAPJMLGFOAIOEJLKOMMCJLK
DDDLDDLLLLLLLLLDDDLDDLDLDL
Symbology Independent Parameters
CODE IDENTIFIER
48
Disabled
Custom Code ID
AOCPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFAFIK
AKCBPJCJGIIJCMCFGNOPBGHPJK
AEFBJLBGMHPKNIGPNAEBNHLEGK
AAPHBAJICGHAMCNFBEFLHEFBDK
AHLFAOKCHHDGGGHMMLMEENPIKK
DLDLLLLDDLLLLLLDDLDDDLDLLL
AOCPCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDCGIK
AKCBPJCJGIIJCMCFHMNDLJMBPK
AEFBJLBGMHPKNPBLCFDNHBAFGK
AAPHBAJIDFDHJLHKPJBHBMDDFK
AGLFALLLLBAAMMDJGOLIMEIJIK
DLDLLLLDDLLLLLLDLLDDDLDLLL
AIM Standard Code ID
Datalogic Code ID
AOCPCOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEGCEIK
AKCBPJCJGIIJCMCEGKJIDLDDLK
AEFBJLBGMHPLMPGPPHKFDNJHGK
AAPHBAJJCBHPJOJIKGAGPFMNBK
AFLFAINIOIDAKBHBLJNIIBHJJK
DLDLLLLDDLLLLLLDDLDDDLDLLL
AOCPCOHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKECFFIK
AKCBPJCJGIIJCMCEHPNJFAEHNK
AEFBJLBGMHPKNLFGGOPHKJNGGK
AAPHBAJJCBEBABOMNOJCIEBNBK
AGKFAJKGNAGCAIGNCLHAIDBLIK
DLLLLLLDDLLLLLLDDLLDDLDLDL
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
CUSTOM CODE IDENTIFIER
Custom Code Identifier
AOCPBLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEHFHIK
AKCBPJCJGIIJCMCFGJLLDNBJNK
AEFBJLBGMHPKNOGANCECFEMGGK
AAPHBAJIDDGNCMJCAFDEFOFNHK
AEKFALLKNIIMEADJNKJEAODLJK
DLDLLLLDDDLLLLLDLLLDDLDLLL
1. Select a Datalogic Standard Code Identifier
from the Code Identifier Table in
Appendix C.
2. Set the number of characters in the range 0-3,
where 0 = Code ID disabled.
3. Read the corresponding characters as Hex values from the Hex/Numeric table. Valid values
are in the range 
00-7F.
CODE LENGTH
Disabled
Enabled
AOCLGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEGCGIK
AKCBPJCJGIIJCMCFGMILJDIPLK
AEFBJLBGMHPLMPBKJNELHDNFGK
AAPHBAJJCDEODAAPIINCGKOLHK
AEKFAMKLLILKOOKLELDGMGALJK
DLLLLLLDLLLLLLLDLDDDDLDLLL
AOCLGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEAAFIK
AKCBPJCJGIIJCMCFHNLHDMDBNK
AEFBJLBGMHPLMIGOGIDHNFGEGK
AAPHBAJJDAAJGJKAGFJOACIJBK
AFKFAJLCHOIMEEOOOOEKEPHKLK
DLLLLLLDLLLLLLLDDDDDDLDLLL
SET HEADERS
Set Headers
AOCLFLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFEHEIK
AKCBPJCJGIIJCMCFGINPLIOJPK
AEFBJLBGMHPLMJBFJPEIPAKHGK
AAPHBAJJDGFDNOEIJJLNEAOHDK
AHLFAJLDBHAAMIOOFKGGIFMIKK
DLLLLLLDLDLLLLLDDDLDDLDLLL
1. Set the number of characters in the range
00-10.
2. Read the corresponding characters as Hex
values from the Hex/Numeric table. Valid
values are in the range:
• 00-7F for RS-232, USB BULK, USB
COM, USB Generic HID
• 00-9B for Wedge and USB Keyboard
3. Read the following code to enable the configuration you have set.
HEADERS
Product Reference Guide
Disabled
Enabled
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFBEEIK
AKCBPJCJGIIJCMCFHIKKDCLPNK
AEFBJLBGMHPLMNFFBGNNEOOGGK
AAPHBAJIDGHEPGHBBJPCOGPHBK
AELFAIKKKDJICAIGFBKGKACIKK
DDDLLLLDLDDLLLLDLLLDDLDLDL
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFHGHIK
AKCBPJCJGIIJCMCFGJJGJNABLK
AEFBJLBGMHPLMKCBODKBOIFHGK
AAPHBAJICFDDKPNOPELOIOJFHK
AFLFANLDGFKOIKMDPENKCJFJIK
DDDLLLLDLDDLLLLDDLLDDLDLDL
49
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
SET TERMINATORS
Set Terminators
AOCLBPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFAHGIK
AKCBPJCJGIIJCMCEGKMBDAFBPK
AEFBJLBGMHPLNOFGDKLPFPNFGK
AAPHBAJICHAICAAEDMENDAINBK
AFKFAMKDELFIIOFHBCGIKDELJK
DDLLLLLDLLLLLLLDLLDDDLDLLL
1. Set the number of characters in the
range 00-10.
2. Read the corresponding characters as
Hex values from the Hex/Numeric
table. Valid values are in the range:
• 00-7F for RS-232, USB BULK,
USB COM, USB Generic HID
• 00-9B for Wedge and USB Keyboard
3. Read the following code to enable the
configuration you have set.
TERMINATORS
50
Disabled
Enabled
AOCLCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFEGIK
AKCBPJCJGIIJCMCEHKLELKAHNK
AEFBJLBGMHPLNKBGLDCKOBJEGK
AAPHBAJJCHCPAIDNLMACJGJNDK
AGKFANLKPPMAGGDPBJKIIGKLJK
DLDLLLLDLLDLLLLDDDDDDLDLDL
AOCLCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDGFIK
AKCBPJCJGIIJCMCEGLIIBFLJLK
AEFBJLBGMHPLNNGCEGFGEHCFGK
AAPHBAJJDEGIFBJCFBEOPOPPFK
AHKFAIKDDJPGMMHKLMNEAPNKLK
DLDLLLLDLLDLLLLDLDDDDLDLDL
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
Symbology Dependent Parameters
The “Symbology Specific Format Default” code on page 54 allows restoring the symbology
dependent parameters related to a specific code family to the default values.
SYMBOLOGY SPECIFIC FORMAT
Symbology Specific Format
AOCLCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEGHGIK
AKCBPJCJGIIJCMCFHLNMJCGPLK
AEFBJLBGMHPLMMGPEPDOAPMGGK
AAPHBAJJDCFMDNCMBONAPKCNHK
AGKFALICLLGKIBEJGFOCKENJLK
DLLLLLDLLLDLLLLDDLDDDLDLLL
1. Select a Datalogic Standard Code Identifier
from the Code Identifier Table in
Appendix C.
2. Formatting:
0 = select all - Stop
1 = select right - followed by Step 3
2 = select left - followed by Step 3
3 = select middle - followed by a
number in the range 000-999 
for the starting character and 
then, by Step 3
4 = discard right - followed by Step 3
5 = discard left - followed by Step 3
6 = discard middle - followed by a
number in the range 000-999 
for the starting character and 
then followed by Step 3
Set the number of characters to select/discard in the
range 000-999.
Symbology Headers
Symbology Headers
AOCPFPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFEGEIK
AKCBPJCJGIIJCMCEGJLCJPHBPK
AEFBJLBGMHPKNNDHOGJCJDBFGK
AAPHBAJICDAIOGPCAEKBELJJBK
AFLFANMIJICKAJMIONHKIJOLLK
DDLLLDLDDDDLLLLDDLLDDLDLLL
1. Select a Datalogic Standard Code Identifier
from the Code Identifier Table in
Appendix C.
2. Set the number of characters in the range 0-5.
3. Read the corresponding characters as Hex values from the Hex/Numeric table. Valid values
are in the range:
• 00-7F for RS-232, USB BULK, USB
COM, USB Generic HID
• 00-9B for Wedge and USB Keyboard
Read the following code to enable the configuration
you have set.
Product Reference Guide
51
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
HEADERS
Headers
AOCPFPHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEBGEIK
AKCBPJCJGIIJCMCFHKPEEAKDLK
AEFBJLBGMHPKNPAPMMGMNIIHGK
AAPHBAJIDDEICPPPODIOCPCPHK
AELFANOCPAJCGLHLEJKOEMJJLK
DLLLLDLDLLDLLLLDLLDDDLDLLL
1. Select a Datalogic Standard Code Identifier
from the Code Identifier Table in
Appendix C.
2. 0 = disabled
1 = enabled
SYMBOLOGY TERMINATORS
Symbology Terminators
AOCPFLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFGAGIK
AKCBPJCJGIIJCMCFGONFOBJDNK
AEFBJLBGMHPKNNEAEHPKOFLEGK
AAPHBAJJCGHCOJIBHCKOKDDDBK
AEKFAJODOLLAKFFGFDDOCKLKIK
DDDLLDLDLDLLLLLDLDLDDLDLDL
1. Select a Datalogic Standard Code Identifier
from the Code Identifier Table in
Appendix C.
2. Set the number of characters in the range 0-5.
3. Read the corresponding characters as Hex values from the Hex/Numeric table. Valid values
are in the range:
• 00-7F for RS-232, USB BULK, USB
COM, USB Generic HID
• 00-9B for Wedge and USB Keyboard
4. Read the following code to enable the configuration you have set.
TERMINATORS
Terminators
AOCPFLHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEDAGIK
AKCBPJCJGIIJCMCEHNJDDOEBJK
AEFBJLBGMHPKNPHIGNAEKOCGGK
AAPHBAJJDGDCCAIMJFIBMHIFHK
AFKFAJMJIDAIMHOFPHOKOPMIIK
DLDLLDLDDLLLLLLDDDDDDLDLDL
1. Select a Datalogic Standard Code Identifier
from the Code Identifier Table in
Appendix C.
2. 0 = disabled
1 = enabled
52
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
SYMBOLOGY CHARACTER SUBSTITUTION
Symbology Character Substitution
AOCPBLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFAGGIK
AKCBPJCJGIIJCMCFGLKMBHMJPK
AEFBJLBGMHPKMKHEEDGFDMGHGK
AAPHBAJJDCFDBILOKBFBDLPDDK
AHKFAINIMEHCEPHBKFHEKPGIIK
DLLLLDLDDLDLLLLDLDDDDLDLLL
1. Select a Datalogic Standard Code Identifier
from the Code Identifier Table in
Appendix C.
2. Read the corresponding character as Hex
value from the Hex/Numeric table which
identifies the character to be substituted.
Valid value is in the range 00-7F.
3. Read the corresponding character as Hex
value from the Hex/Numeric table which
identifies the new substituting character.
Valid value is in the range 00-7F.
4. Read the following code to enable the configuration you have set.
CHARACTER SUBSTITUTION
Character Substitution
AOCPBLHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFGGIK
AKCBPJCJGIIJCMCEHIOKMIBLLK
AEFBJLBGMHPKMIEMGJJLHHPFGK
AAPHBAJJCCBDNBLDEGHOFPEFFK
AGKFAIPCKMMKCNMCABKAGKBKIK
DDLLLDLDLDDLLLLDDDLDDLDLLL
1. Select a Datalogic Standard Code Identifier
from the Code Identifier Table in
Appendix C.
2. 0 = disabled
1 = enabled
SYMBOLOGY CHARACTER DELETION
Symbology Character Deletion
AOCLFPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEBCHIK
AKCBPJCJGIIJCMCEGNKPOMNLPK
AEFBJLBGMHPLNNHGKPAHOOKHGK
AAPHBAJJDCBHOFBHELNHMNODHK
AFKFAOPKHIGEGLDIJLMCIHMKIK
DLLLLDLDDLLLLLLDLDDDDLDLDL
1. Select a Datalogic Standard Code Identifier
from the Code Identifier Table in
Appendix C.
2. Read the corresponding character as Hex value
from the Hex/Numeric table which identifies
the character to be deleted. 
Valid value is in the range 00-7F.
3. Read the code to enable the configuration you
have set.
Product Reference Guide
53
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
CHARACTER DELETION
Character Deletion
AOCLFPHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFECHIK
AKCBPJCJGIIJCMCFHOOJDDAJLK
AEFBJLBGMHPLNPEOIFPJKFDFGK
AAPHBAJJCCFHCMBKKMPIKJFFBK
AEKFAONABANMAJILDPBGECLIIK
DDLLLDLDLDLLLLLDDDLDDLDLDL
1. Select a Datalogic Standard Code Identifier
from the Code Identifier Table in
Appendix C.
2. 0 = disabled
1 = enabled
SYMBOLOGY SPECIFIC FORMAT DEFAULT
Symbology Specific Format Default
AOCPBLDIHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFAAEIK
AKCBPJCJGIIJCMCEHOIKHBLJNK
AEFBJLBGMHPKMMHNPMDEIGJGGK
AAPHBAJICDAGPDAKALKOINIBHK
AFKFANJCEPAAEBCDGCFGONPKKK
DLDLDDLLDDDLLLLDDLLDDLDLLL
54
Select a Datalogic Standard Code Identifier from
the Code Identifier Table in Appendix C.
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
Concatenation
DEFINE CONCATENATION
Define Concatenation
AOCLBLHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFACFIK
AKCBPJCJGIIJCMCEHMPHLLLBLK
AEFBJLBGMHPLMIANCAAOAKEHGK
AAPHBAJIDDAMNCFGAJAINJDPDK
AGLFALMAEMIEEPDCHHBIGEDLLK
DLLLLDLDLLLLLLLDLLDDDLDLDL
1. Select the number of codes to
concatenate in the range 2-4.
2. Select the Datalogic Standard
Code Identifier for each code
to concatenate (repeat for same
code types) from the table in
Appendix C.
3. Read the following Code to
enable the configuration you
have set.
CONCATENATION ENABLE/DISABLE
Disabled
Enabled
AOCLCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFBFIK
AKCBPJCJGIIJCMCEGMICDBOHJK
AEFBJLBGMHPLMMENKJJLLEAGGK
AAPHBAJJDDCLPKGPIJEHHPCPBK
AFLFAKNJPIBMKHFKHMNIEBNLLK
DDDLLDLDLLDLLLLDDDDDDLDLLL
AOCLCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDDGIK
AKCBPJCJGIIJCMCEHNLOJOFJPK
AEFBJLBGMHPLMLDJFMOHBCLHGK
AAPHBAJJCAGMKDMAGEALBHENHK
AELFAPMADOCKANBPNJKEMIKKJK
DDDLLDLDLLDLLLLDLDDDDLDLLL
Concatenation Options
FIRST CONCATENATED CODE LENGTH
Set First Concatenated Code Length
AOCLCKHOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEABHIK
AKCBPJCJGIIJCMCFHLKPMKFPLK
AEFBJLBGMHPKNNGOKPMDEJKEGK
AAPHBAJICEFCFKJNIILEINNFHK
AELFAJICKBNGEDLFILEAAIELKK
DLDLLDLDLDLLLLLDDLDDDLDLDL
Read the number in the
range 000-255.
000 = any code length
SECOND CONCATENATED CODE LENGTH
Set Second Concatenated Code Length
AOCLCKHOBNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFFBFIK
AKCBPJCJGIIJCMCEGNOEEIKNPK
AEFBJLBGMHPLMNBKHNFLAFDGGK
AAPHBAJJDABKFPHPNHKFGECLDK
AHLFAKOBPIOGCOPNFMCAENLLLK
DLDLLDLDLDLLLLLDLLDDDLDLDL
Product Reference Guide
Read the number in the
range 000-255.
000 = any code length
55
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
THIRD CONCATENATED CODE LENGTH
Set Third Concatenated Code Length
AOCLCKHOBNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKFBGEIK
AKCBPJCJGIIJCMCEHIKFCDNJJK
AEFBJLBGMHPKNJCDOEAJJBHHGK
AAPHBAJJDACEMAALKPDBBFPLDK
AEKFALJPMALEIHOBMOIIEPNJKK
DLLLLDLDLDLLLLLDLLLDDLDLLL
Read the number in the
range 000-255.
000 = any code length
FOURTH CONCATENATED CODE LENGTH
Set Fourth Concatenated Code Length
AOCLCKHOBNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJALEEGGIK
AKCBPJCJGIIJCMCFGOOOKBCLNK
AEFBJLBGMHPLMJFHDGJBNNOFGK
AAPHBAJICEGMMFOJPACAPMAFHK
AHKFAIPMJJIEOKKJBJOIAKCJLK
DLLLLDLDLDLLLLLDDLLDDLDLLL
Read the number in the
range 000-255.
000 = any code length
CONCATENATION WITH INTERCODE DELAY
Disabled
Enabled
AOCLCKFMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFAEHIK
AKCBPJCJGIIJCMCEGKOHEIPLNK
AEFBJLBGMHPLNKDDEFMGJJDGGK
AAPHBAJICAGADJGKIBPOIBOLHK
AGKFAILHIGKOGCKPACNKMNLKLK
DLDLLDLDDLDLLLLDDLLDDLDLLL
AOCLCKFMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFGGEIK
AKCBPJCJGIIJCMCEHLNLOHEFLK
AEFBJLBGMHPLNNEHLALKDPIHGK
AAPHBAJIDDCHGAMFGMLCOJIJBK
AHKFANKOEAJIMIOKKHKGEEMLJK
DLDLLDLDDLDLLLLDLLLDDLDLLL
This parameter is enabled
with concatenation activated
(see "Concatenation" on
page 17 for details).
CONCATENATION FAILURE TRANSMISSION
TX Codes Causing Failure
No Code TX
AOCLCKHODNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFDDEIK
AKCBPJCJGIIJCMCEHJNFLKDDJK
AEFBJLBGMHPKNICCHAEBKEIHGK
AAPHBAJICHFFMKDPICNHIBABHK
AELFAMLBAPFIILEDIKOIEEEIIK
DDDLLDLDDLLLLLLDDLLDDLDLDL
AOCLCKHODNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFFBHIK
AKCBPJCJGIIJCMCEGIOJBFINPK
AEFBJLBGMHPKNPFGIFDNACDGGK
AAPHBAJIDEBCJDJAGPJLOJGDBK
AFLFAJKIMJGOCBAGCPJEMNDJKK
DDDLLDLDDLLLLLLDLLLDDLDLDL
See "Concatenation" on page 17 for details
CONCATENATION TIMEOUT
Concatenation Timeout
AOCLBLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFGHGIK
AKCBPJCJGIIJCMCFGOPMDJOBJK
AEFBJLBGMHPLNNDPHBNPJOBFGK
AAPHBAJIDEELIBJFIAEEHOPNHK
AFKFALIKKDNAKBLDFEDGAMPLKK
DDLLLDLDDLDLLLLDDLDDDLDLLL
56
05-99 = timeout from 5 to
99 seconds.
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
DATA FORMAT
TRANSMISSION AFTER TIMEOUT
No Code Transmission
First Code Transmission
AOCLCKFOFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFDEGIK
AKCBPJCJGIIJCMCFHOIJLDLHLK
AEFBJLBGMHPLNJHPPIEKCAFEGK
AAPHBAJJDEGMKJKMAAALNIONFK
AGKFAKJDBHEIEJNLFPPGCJBLKK
DLDLLDLDDLLLLLLDLDDDDLDLDL
AOCLCKFOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFFGFIK
AKCBPJCJGIIJCMCFGPLFBMAJNK
AEFBJLBGMHPLNOALANDGIGOFGK
AAPHBAJJCHCLPAADONEHLAIPDK
AHKFAPIKNBHOODJOPKIKKAGKIK
DLDLLDLDDLLLLLLDDDDDDLDLDL
Second Code Transmission
Third Code Transmission
AOCLCKFOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEAGHIK
AKCBPJCJGIIJCMCEHJPOJOPLJK
AEFBJLBGMHPKMOHPNPKOMKHHGK
AAPHBAJIDDGDPFOBLCFGFJHBHK
AEKFAMOJIIEOIONGCNOKOFJKJK
DLDLLDLDDLLLLLLDLDDDDLDLDL
AOCLCKFOFNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALEEBGIK
AKCBPJCJGIIJCMCEGMLPPFIPPK
AEFBJLBGMHPLNKEGEGPMFODGGK
AAPHBAJIDDFNGKJFMKMCCIKBHK
AHLFANJHLABMCHMKLPECOHPIIK
DLLLLDLDDLLLLLLDLDLDDLDLLL
CONCATENATION RESULT CODE ID
No Code Identifier
Use First Code Identifier
AOCLCKFMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEFEHIK
AKCBPJCJGIIJCMCFHJKBJHCJJK
AEFBJLBGMHPLNIALGPDINCKEGK
AAPHBAJIDACAPAGHGGNBOFFNBK
AHKFAIJNOOBGAABMKGAOAIMILK
DDDLLDLDLDDLLLLDLLDDDLDLLL
AOCLCKFMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEDGEIK
AKCBPJCJGIIJCMCFGIJNDIJHPK
AEFBJLBGMHPLNPHPJKEEHEBFGK
AAPHBAJICDGHKJMIILJNINDPHK
AGKFANIECICAKKFJADHCIBLJJK
DDDLLDLDLDDLLLLDDLDDDLDLLL
Use Second Code Identifier
Use Third Code Identifier
AOCLCKFMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFGGGIK
AKCBPJCJGIIJCMCEHONGLKGFLK
AEFBJLBGMHPKMPALEINMDIIHGK
AAPHBAJJDHCPKMCKNEIMGEMBDK
AFKFAOOHHBBAMHBBNEBCMEEJIK
DDDLLDLDLDDLLLLDLLDDDLDLLL
AOCLCKFMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKFCBHIK
AKCBPJCJGIIJCMCEGLJHNBBBNK
AEFBJLBGMHPLNLDCNBIOKMMGGK
AAPHBAJJDHBBDDFOKMBIBFBBDK
AGLFAPJJEJECGOANEGLKMGCLJK
DDLLLDLDLDDLLLLDLLLDDLDLDL
Use Fourth Code Identifier
AOCLCKFMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJALEHBFIK
AKCBPJCJGIIJCMCFHNNMFDODJK
AEFBJLBGMHPKMLEGADBGOAFEGK
AAPHBAJICDFJDGLMPDAJPMOPHK
AFLFAMPKBAHCADEFJBNKIDNLIK
DDLLLDLDLDDLLLLDDLLDDLDLDL
Product Reference Guide
57
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
PoWER SAVE
POWER SAVE
ILLUMINATION SYSTEM POWER
Product Reference Guide
Illumination System OFF
Illumination System ON
APDMCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFFFHIK
AKCBPJCJGIIJCMCFGOLCIKNHNK
AEFBJLBGMHPLNPBMDCLPNODEGK
AAPHBAJJCDDHDGLDACHDFPBJHK
AHKFAPPBFGDECMMLAKHGKLBJLK
DDDLLLLDDLDLLLLDDDLDDLDLLL
APDMCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCFHPIOCFGJLK
AEFBJLBGMHPLNIGIMHMDHIIFGK
AAPHBAJJDAHAGPBMOPDPDHHLBK
AGKFAKOIJAACIGIOKPAKCCGIJK
DDDLLLLDDLDLLLLDLDLDDLDLLL
58
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
CODE SELECTION
Disable All Symbologies
Disable All Linear Symbologies
APCPCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFHEHIK
AKCBPJCJGIIJCMCEHPIFJNCLPK
AEFBJLBGMHPKNPEHGMLHNABFGK
AAPHBAJICFBOAJJGCKPDGADNBK
AEKFAPJAJPBAEIBFNOAIKGGIKK
DLDLDDLDDDLLLLLDDLLDDLDLLL
APCPGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFBCHIK
AKCBPJCJGIIJCMCEHKPMGLHBNK
AEFBJLBGMHPKMIHDGICIAJMGGK
AAPHBAJIDBDPPIKJPJAMPIPNDK
AHKFAOKLLANCKCDCCIECCDLKKK
DDLLDDLDLLDLLLLDDLDDDLDLDL
Disable All 2D Symbologies
APCPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFFCFIK
AKCBPJCJGIIJCMCFHIOCODMJNK
AEFBJLBGMHPKNPDAMNNPKGLEGK
AAPHBAJJCAGEAGOFFMPMIIJHBK
AFLFALLLOMIKOEILGAEMAFDJJK
DLLLDDLDLDDLLLLDLDLDDLDLDL
ISSUE IDENTICAL CODES
Disabled
Enabled
APCPGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEGEFIK
AKCBPJCJGIIJCMCEGONNMKEBLK
AEFBJLBGMHPKMKDMODLODEPFGK
AAPHBAJJCEAFDONHGICMHEOBFK
AHLFAKKKKLPAGMBPDCNCEFJJJK
DLDLDDLDLDLLLLLDDDLDDLDLLL
APCPGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEAGGIK
AKCBPJCJGIIJCMCEHPOBGFPPNK
AEFBJLBGMHPKMNEIBGMCJCEEGK
AAPHBAJJDHECGHHIIFGABMIDDK
AGLFAPLDGNMGMGFKJHKOMMOILK
DLDLDDLDLDLLLLLDLDLDDLDLLL
See "Issue Identical Codes" on page 114 for details.
59
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
Linear Symbologies
UPC/EAN/JAN FAMILY
EAN/UPC/JAN Disabled
EAN/UPC/JAN Enabled
APCLCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFHAGIK
AKCBPJCJGIIJCMCFHPJEAPMJJK
AEFBJLBGMHPKNJGOAPBLPJDHGK
AAPHBAJJDDGHGLPOOCPECPMHBK
AEKFANIFNPLCKOPGILGOAPPJIK
DLDLLLLDDLDLLLLDDLDDDLDLLL
APCLCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFBCFIK
AKCBPJCJGIIJCMCFGOKIKAHHPK
AEFBJLBGMHPKNOBKPKGHFPIGGK
AAPHBAJJCACADCFBAPLIEHKFHK
AFKFAIJMBJIEAELDCOBCIGIIKK
DLDLLLLDDLDLLLLDLLDDDLDLLL
Add-On Disabled
Add-On Enabled
APCLCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALECAGIK
AKCBPJCJGIIJCMCEGMNCNABLNK
AEFBJLBGMHPKNLFGCFOFLCKFGK
AAPHBAJJCDCHKCPDAFNLELHBHK
AFKFANKPLHAKMMEFCPLKMKILIK
DDDLLLLDLDDLLLLDLLLDDLDLLL
APCLCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEECFIK
AKCBPJCJGIIJCMCEHNOOHPKFLK
AEFBJLBGMHPKNMCCNAJJBEBEGK
AAPHBAJJDAGAPLFMOIJHCDBDBK
AEKFAILGHBDMGGAAIKMGEDPKKK
DDDLLLLDLDDLLLLDDLLDDLDLLL
UPCE Expansion Disabled
UPCE Expansion Enabled
APCLCOFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEEFFIK
AKCBPJCJGIIJCMCFHONJFCELPK
AEFBJLBGMHPKMOGEHEDECGPHGK
AAPHBAJJCEGAPBDAIMJHOMLDDK
AGLFANOFFIFOCCMEAMJEKCELJK
DLDLLLLDDDLLLLLDDLLDDLDLDL
APCLCOFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKECHGIK
AKCBPJCJGIIJCMCFGPOFPNPFJK
AEFBJLBGMHPKMJBAIBEIIAEGGK
AAPHBAJJDHCHKIJPGBNLIENBFK
AHLFAIPMJOGIIIIBKJOICLDKLK
DLDLLLLDDDLLLLLDLLLDDLDLDL
CODE 39 FAMILY
Code 39 Std - Disabled
Code 39 Std - No Check Digit Control
APCPCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEACHIK
AKCBPJCJGIIJCMCEHMOOACIBLK
AEFBJLBGMHPLNJFIOHOGPCCEGK
AAPHBAJJCHACGHGINLINEBBHHK
AFKFAKJMEMGGGAJIEDJCKCIJIK
DDLLLLLDLDDLLLLDDLLDDLDLLL
APCPCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEGAEIK
AKCBPJCJGIIJCMCEGNNCKNDPNK
AEFBJLBGMHPLNOCMBCJKFEJFGK
AAPHBAJJDEEFDOMHDGMBCJHFBK
AEKFAPIFIKFAMKNNOGOOCLPIKK
DDLLLLLDLDDLLLLDLLLDDLDLLL
Code 39 Std - Check Digit Control without Transmission
Code 39 Std - Check Digit Control and
Transmission
APCPCKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFDAGIK
AKCBPJCJGIIJCMCFHLJJCPMNJK
AEFBJLBGMHPKMOFIMAACBIAHGK
AAPHBAJICAANDLCFGJNAMAILFK
AHKFAMOGNDGAKHJFDBIOGOAILK
DDLLLLLDLDDLLLLDDLLDDLDLLL
APCPCKHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKFHHHIK
AKCBPJCJGIIJCMCFGONIEELJPK
AEFBJLBGMHPLNKGBFJFAIMEGGK
AAPHBAJICADDKEFBBBEELBFLFK
AELFANJIOLDCAOIJKDCGGMGKKK
DDDLLLLDLDDLLLLDDLDDDLDLDL
Product Reference Guide
60
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
CODE 39 FAMILY (CONTINUED)
Code 39 Full ASCII - Disabled
Code 39 Full ASCII- Enabled
APCPCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFCHIK
AKCBPJCJGIIJCMCFGPKINNFDPK
AEFBJLBGMHPLNLGAMNBILJLGGK
AAPHBAJJDHECKOGFDMKCCFKBBK
AEKFAKLGCENOACCLOHEGGHPLIK
DLLLLLLDDLDLLLLDLLDDDLDLLL
APCPCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDAEIK
AKCBPJCJGIIJCMCFHOJEHCONJK
AEFBJLBGMHPLNMBEDIGEBPAHGK
AAPHBAJJCEAFPHMKNBOOENMDHK
AFKFAPKPOCOIKIGOECDKOOIKKK
DLLLLLLDDLDLLLLDDLDDDLDLLL
Code Length Check - Disabled
Code Length Check - Enabled
APCPCKFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEHNKDFPADNK
AEFBJLBGMHPLMOFCJMMJCNOEGK
AAPHBAJJDAAFPNKGLFOOICGDFK
AHLFAKPMMLIKOMKKMEGIAPDLJK
DDLLLLLDLLLLLLLDDLDDDLDLDL
APCPCKFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFFFHIK
AKCBPJCJGIIJCMCEGMJPPALNLK
AEFBJLBGMHPLMJCGGJLFILFFGK
AAPHBAJJCDECKEAJFIKCOKABDK
AGLFAPOFANLMEGOPGBBEIGEKLK
DDLLLLLDLLLLLLLDLLDDDLDLDL
Minimum Code Length
APCPBLFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFGEEIK
AKCBPJCJGIIJCMCEGNNGNFFFPK
AEFBJLBGMHPLMKBCBFFMJDKFGK
AAPHBAJIDACCNFJPDFKBCEHDHK
AELFALOFHPBCAEMCMPKICKNLJK
DLDLLLLDLLDLLLLDLDDDDLDLLL
Read the number in the
range 001-255.
Maximum Code Length
APCPBLFMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEAEFIK
AKCBPJCJGIIJCMCEGKPOPBMLNK
AEFBJLBGMHPLMLGGICCOGBFFGK
AAPHBAJJDEGOIMFEFDHLBJMDDK
AFLFAJOLIGEMENAFDGFAALAIIK
DDDLLLLDDDLLLLLDLLDDDLDLDL
Read the number in the
range 001-255.
Start-Stop Character Transmission Disabled
Start-Stop Character Transmission Enabled
APCPCKFMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEFHFIK
AKCBPJCJGIIJCMCEHKILHLJNPK
AEFBJLBGMHPLMPCGALLLNPBEGK
AAPHBAJIDEEJKEGNNDDELPNDBK
AGLFAIPCDCNEKFGNDNJACOOIIK
DLLLLLLDDDDLLLLDDDDDDLDLLL
APCPCKFMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEDFGIK
AKCBPJCJGIIJCMCEGLLHNECDJK
AEFBJLBGMHPLMIFCPOMHHJKFGK
AAPHBAJICHAOPNMCDOHINHLBHK
AHLFANOLPEOCAPCIJIOMKHJJKK
DLLLLLLDDDDLLLLDLDDDDLDLLL
CODE 32 FAMILY
61
Disabled
Enabled
APCPCKFOBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEDFEIK
AKCBPJCJGIIJCMCEGPNMPAEJPK
AEFBJLBGMHPKNLEJNCGBMPJFGK
AAPHBAJJCADHJEDNNIKEEBPNHK
AHLFAOJKMFJAIJHEMLKACLHLLK
DLLLLLLDLDLLLLLDDLLDDLDLDL
APCPCKFOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEFHHIK
AKCBPJCJGIIJCMCEHOOAFPPHJK
AEFBJLBGMHPKNMDNCHBNGJCEGK
AAPHBAJJDDHAMNJCDFOICJJPBK
AGLFALIDADKGCDDBGONMKCAKJK
DLLLLLLDLDLLLLLDLLLDDLDLDL
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
INTERLEAVED 2 OF 5 FAMILY
Disabled
Enabled - No Check Digit Control
APCLGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFBGGIK
AKCBPJCJGIIJCMCFHKONPJJDLK
AEFBJLBGMHPKMOFKALIECAOEGK
AAPHBAJJCHEGJKMBDBALLHAHDK
AHKFAMLOPAHAEENBHNCEIKCLIK
DDLLLLLDLDLLLLLDDLLDDLDLDL
APCLGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFHEFIK
AKCBPJCJGIIJCMCFGLNBFGCNNK
AEFBJLBGMHPKMJCOPOPIIGFFGK
AAPHBAJJDEABMDGONMEHNPGFFK
AGKFAJKHDGEGOOJENIFIADFKKK
DDLLLLLDLDLLLLLDLLLDDLDLDL
Enabled - Check Digit Control and
without Transmission
Enabled - Check Digit Control and
Transmission
APCLGOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKECEHIK
AKCBPJCJGIIJCMCEHNJKNENPJK
AEFBJLBGMHPLNJFKCMGAMKMHGK
AAPHBAJICAEJMGIMIDFGDGJLBK
AFKFAKMEGPHGIDNMAPDIEGKKLK
DDLLLLLDLDLLLLLDDLLDDLDLDL
APCLGOHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALEGDGIK
AKCBPJCJGIIJCMCEGINLLPKLPK
AEFBJLBGMHPKMNGDLFDCFOIGGK
AAPHBAJICAHHFJPIPLMCEHELBK
AGLFALLKFHCECKMAJNJAEEMIKK
DDDLLLLDLDLLLLLDDLDDDLDLLL
Code Length Check - Disabled
Code Length Check - Enabled
APCLGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEEGGIK
AKCBPJCJGIIJCMCEGJKLCGEBPK
AEFBJLBGMHPKMMGCCBHKGLHGGK
AAPHBAJJDHAGFDMMNGCENDLBFK
AGKFAMJEJIMICGGCNJPAEPFJIK
DLLLLLLDDLLLLLLDLLDDDLDLDL
APCLGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALECEFIK
AKCBPJCJGIIJCMCEHIJHIJPPJK
AEFBJLBGMHPKMLBGNEAGMNMHGK
AAPHBAJJCEEBAKGDDLGILLNDDK
AHKFAJINFOPOIMCHHMIMMGCIKK
DLLLLLLDDLLLLLLDDLDDDLDLDL
Minimum Code Length
APCLFPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFCAFIK
AKCBPJCJGIIJCMCEHIJDPBJFLK
AEFBJLBGMHPKNPCINDMAAKPHGK
AAPHBAJICACGOBDLDIAILGNFFK
AHLFANONKLLMECDIFFMKMHALJK
DDDLLLLDDDLLLLLDDDLDDLDLDL
Read the number in the
range 001-255.
Maximum Code Length
APCLFPFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEHAFIK
AKCBPJCJGIIJCMCFGLNFCOEHPK
AEFBJLBGMHPKNNBAPJDOEBGFGK
AAPHBAJIDAGGCIDGNPCHNCGDDK
AGLFANMHMDAECAILPBBOACHJJK
DLDLLLLDLLLLLLLDLDDDDLDLDL
Product Reference Guide
Read the number in the
range 001-255.
62
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
CODABAR FAMILY
Disabled
Enabled - No Check Digit Control
APCLGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFDAEIK
AKCBPJCJGIIJCMCEHNIKIHHBJK
AEFBJLBGMHPKMOCNKKOMFGEFGK
AAPHBAJICCDMJFLCEHAEFPKNDK
AGLFAIJFIDOKOIEPMDGACJHKLK
DDDLLLLDDDDLLLLDLDLDDLDLLL
APCLGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFFCHIK
AKCBPJCJGIIJCMCEGMLGCIMPPK
AEFBJLBGMHPKMJFJFPJAPAPEGK
AAPHBAJIDBHLMMBNKKEIDHMPFK
AHLFANIMEFNMECAKGGBMKAALJK
DDDLLLLDDDDLLLLDDDLDDLDLLL
Enabled - Check Digit Control without
Transmission
Enabled - Check Digit Control and
Transmission
APCLGKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEACFIK
AKCBPJCJGIIJCMCFHKPNKKDNLK
AEFBJLBGMHPLNJCNINAILMGGGK
AAPHBAJJCFDDMJPPPFFJNODBBK
AELFAOOPBMOMCPECLBHMOFPLIK
DDDLLLLDDDDLLLLDLDLDDLDLLL
APCLGKHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKEEFEIK
AKCBPJCJGIIJCMCFGPLMMBEJNK
AEFBJLBGMHPKMNBEBEFKCICHGK
AAPHBAJJCFANFGILINMNKPOBBK
AHKFAPJBCELOIGFOCDNEOHJJJK
DDLLLLLDDDDLLLLDLDDDDLDLDL
Code Length Check - Disabled
Code Length Check - Enabled
APCLGKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEGAEIK
AKCBPJCJGIIJCMCFGOMMFIKDNK
AEFBJLBGMHPKMMBFIABCBNNHGK
AAPHBAJIDCHMFMLPKACLDLBLFK
AHLFAILPOLFCIKPMGHLEOMAILK
DLDLLLLDLLDLLLLDDDDDDLDLLL
APCLGKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEACHIK
AKCBPJCJGIIJCMCFHPPAPHBNLK
AEFBJLBGMHPKMLGBHFGOLLGGGK
AAPHBAJICBDLAFBAENGHFDHJDK
AGLFANKGCNGECALJMCMIGFHJJK
DLDLLLLDLLDLLLLDLDDDDLDLLL
Minimum Code Length
APCLFLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFAGHIK
AKCBPJCJGIIJCMCFHPPEIPHHJK
AEFBJLBGMHPKNPFPHCKIHMFGGK
AAPHBAJJCFFMOOEIEOAHFOHPFK
AGKFAJMGNICGOOKGOLIOGEFKKK
DDLLLLLDLDDLLLLDLLLDDLDLLL
Read the number in the
range 001-255.
Maximum Code Length
APCLFLFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEFGHIK
AKCBPJCJGIIJCMCEGMLCFAKFNK
AEFBJLBGMHPKNNGHFIFGDHMEGK
AAPHBAJJDFBMCHEFKJCIDKMJDK
AHKFAJOMLAJOIMBFEPFKKBCIKK
DLLLLLLDDLDLLLLDDLDDDLDLLL
63
Read the number in the
range 001-255.
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
CODE 128 FAMILY
Code 128 - Disabled
Code 128 - Enabled
APCPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALECEFIK
AKCBPJCJGIIJCMCFHLIJHMGDJK
AEFBJLBGMHPLNJCPEGIOIEIFGK
AAPHBAJICCHIGIBLKNICKJLNHK
AELFAOLHDPPMMMAGPNNGABNILK
DDDLLLLDDDLLLLLDLDLDDLDLDL
APCPCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEEGGIK
AKCBPJCJGIIJCMCFGKLFNDNNPK
AEFBJLBGMHPLNOFLLDPCCCDEGK
AAPHBAJIDBDPDBLEEAMOMBNPBK
AFLFALKOPJMKGGEDFIKKIIKJJK
DDDLLLLDDDLLLLLDDDLDDLDLDL
Code Length Check - Disabled
Code Length Check - Enabled
APCPCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFHEFIK
AKCBPJCJGIIJCMCEGIMPKDLBNK
AEFBJLBGMHPLNLBHGMHAMPBHGK
AAPHBAJIDCDIKBBGEKKNMNALBK
AFLFAOJNFHEEKOLFFJACMEKKLK
DLDLLLLDLLLLLLLDDDDDDLDLDL
APCPCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFBGGIK
AKCBPJCJGIIJCMCEHJPDAMAPLK
AEFBJLBGMHPLNMGDJJAMGJKGGK
AAPHBAJICBHPPILJKHOBKFGJHK
AELFALIEJBHCAEPAPMHOENNLJK
DLDLLLLDLLLLLLLDLDDDDLDLDL
Code 128 - Min. Code Length
APCPBPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEBCGIK
AKCBPJCJGIIJCMCEHJPHHEGFJK
AEFBJLBGMHPLMIFNJOMKKOJGGK
AAPHBAJJCFBIBDOBKEIBKIGPBK
AEKFAPOEGEDAMKOPNFDIEMPIKK
DDLLLLLDLDLLLLLDLLLDDLDLDL
Read the number in the
range 001-255.
Code 128 - Max. Code Length
APCPBPFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFECGIK
AKCBPJCJGIIJCMCFGKLBKLLHNK
AEFBJLBGMHPLMKGFLEDEOFAEGK
AAPHBAJJDFFINKOMEDKOMMNJHK
AFKFAPMOAMIIKIFMHBOMIJIKKK
DLLLLLLDDLLLLLLDDLDDDLDLDL
Product Reference Guide
Read the number in the
range 001-255.
EAN 128 - Disabled
EAN 128 - Enabled
APCPGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEEHEIK
AKCBPJCJGIIJCMCFHPIMDPEDNK
AEFBJLBGMHPKNMBAFIGHBHMGGK
AAPHBAJIDFHLMDPGCLGGHFPJHK
AFLFAJOCNPLGABOEOJOGCBLIIK
DDLLDLLDDDDLLLLDLLLDDLDLLL
APCPGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKECFHIK
AKCBPJCJGIIJCMCFGOLAJAPNLK
AEFBJLBGMHPKNLGEKNBLLBHHGK
AAPHBAJICGDMJKFJMGCKBNJLBK
AELFAMPLBJIAKLKBEMJKKIMJKK
DDLLDLLDDDDLLLLDDLLDDLDLLL
64
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
CODE 128 FAMILY (CONTINUED)
EAN 128 - Code Length Check Disabled
EAN 128 - Code Length Check Enabled
APCPGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFBHEIK
AKCBPJCJGIIJCMCEGMMKOAJBJK
AEFBJLBGMHPKNOCIHCJJFMFEGK
AAPHBAJICFDLAKPLMMEJBBEPBK
AELFAJMILHAOGDFHENDCOEMKIK
DLLLDLLDLLDLLLLDDLDDDLDLLL
APCPGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFHFHIK
AKCBPJCJGIIJCMCEHNPGEPCPPK
AEFBJLBGMHPKNJFMIHOFPKOFGK
AAPHBAJIDGHMFDFECBAFHJCNHK
AFLFAMNBHBDIMJBCOIEOGNLLKK
DLLLDLLDLLDLLLLDLLDDDLDLLL
EAN 128 - Min. Code Length
APCPFPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEHBHIK
AKCBPJCJGIIJCMCEHNPCDHEFNK
AEFBJLBGMHPKMNGCIACDDNNFGK
AAPHBAJJDCBLLIAMCCGFHECLBK
AFKFAILBIEHKAHANMBAIGMJIJK
DDDLDLLDLDDLLLLDLDLDDLDLLL
Read the number in the
range 001-255.
Maximum Code Length
APCPFPFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFCBHIK
AKCBPJCJGIIJCMCFGOLEOIJHJK
AEFBJLBGMHPKMPFKKKNNHGEHGK
AAPHBAJJCCFLHBABMFEKBAJNHK
AEKFAIJLOMMCGFLOGFNMKJOKJK
DLDLDLLDDLDLLLLDDDDDDLDLLL
Read the number in the
range 001-255.
CODE 93 FAMILY
Disabled
Enabled
APCLCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFGEIK
AKCBPJCJGIIJCMCEHIPDHBCLLK
AEFBJLBGMHPKNJBJKOHDIPJGGK
AAPHBAJIDGBNGEINJEPLMHGNBK
AFLFAJKOKMCIACGIDFCKKMKILK
DLLLLLLDLLLLLLLDLDDDDLDLDL
APCLCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDEHIK
AKCBPJCJGIIJCMCEGJMPNOJFNK
AEFBJLBGMHPKNOGNFLAPCJCHGK
AAPHBAJICFFKDNCCHJLHKPAPHK
AELFAMLHGKBOKICNJAFGCFNJJK
DLLLLLLDLLLLLLLDDDDDDLDLDL
Code Length Check - Disabled
Code Length Check - Enabled
APCLCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEAGEIK
AKCBPJCJGIIJCMCFGLLFKOPJPK
AEFBJLBGMHPKNLCBIEINMEAEGK
AAPHBAJICGFNKNIAHDNEKDNLHK
AELFAJIEMEJAGANLJBPOGJNKLK
DDLLLLLDDDLLLLLDDDLDDLDLDL
APCLCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEGEHIK
AKCBPJCJGIIJCMCFHKIJABEHJK
AEFBJLBGMHPKNMFFHBPBGCLFGK
AAPHBAJIDFBKPECPJOJIMLLJBK
AFLFAMJNACKGMKJODEICOAKLJK
DDLLLLLDDDLLLLLDLDLDDLDLDL
Minimum Code Length
APCLBLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFGAHIK
AKCBPJCJGIIJCMCFHKINHJCNLK
AEFBJLBGMHPKMIGLHGDHKFIFGK
AAPHBAJJDBHNBPHHJNPIMGLPHK
AFKFAIPNPHOEAEIBBNMEOBIIKK
DLDLLLLDDLLLLLLDLLDDDLDLDL
Read the number in the
range 001-255.
Maximum Code Length
APCLBLFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEDAHIK
AKCBPJCJGIIJCMCEGJMLKGPPPK
AEFBJLBGMHPKMKFDFMMJOOBHGK
AAPHBAJJCBDNNGHKHKNHKCAJBK
AEKFAINHJPFMGGDCLJBACEPKKK
DDDLLLLDLDLLLLLDDLLDDLDLDL
65
Read the number in the
range 001-255.
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
GS1 DATABAR™ FAMILY
Disable GS1 DataBar Expanded
Enable GS1 DataBar Expanded
APCLCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEADHIK
AKCBPJCJGIIJCMCFHNIDCFBJLK
AEFBJLBGMHPKMNHKJODMJBJGGK
AAPHBAJIDCFJFPNCEGJBEKGJFK
AHKFAOOHMDEMKBLOPEIOKOKKJK
DLLLLDLDDDLLLLLDDDLDDLDLLL
APCLCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEGBEIK
AKCBPJCJGIIJCMCFGMLPIKKHNK
AEFBJLBGMHPKMKAOGLEADHCHGK
AAPHBAJICBBOAGHNKLNNCCALDK
AGKFALPOAFHKALPLFBPCCHNLLK
DLLLLDLDDDLLLLLDLDLDDLDLLL
Disable GS1 DataBar Limited
Enable GS1 DataBar Limited
APCLCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFDHIK
AKCBPJCJGIIJCMCEGOMFPKMLPK
AEFBJLBGMHPKMPECLEMCNKAEGK
AAPHBAJICCBJJGNPKBLOCONPDK
AGKFAOMNKLPEMDANFAFKGLNIJK
DDLLLDLDLLLLLLLDLDDDDLDLLL
APCLCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDBEIK
AKCBPJCJGIIJCMCEHPPJFFHFJK
AEFBJLBGMHPKMIDGEBLOHMLFGK
AAPHBAJIDBFOMPHAEMPCEGLNFK
AHKFALNEGNMCGJEIPFCGOCKJLK
DDLLLDLDLLLLLLLDDDDDDLDLLL
Disable GS1 DataBar Omnidirectional
Enable GS1 DataBar Omnidirectional
APCLCOFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFDGEIK
AKCBPJCJGIIJCMCFHMMOHIJLNK
AEFBJLBGMHPKNKHAOFBDEOFGGK
AAPHBAJICFFOMFBMCIPCIJBNHK
AFLFAOIHEEKACNIMHDHEADBIIK
DLLLLDLDDLDLLLLDDDDDDLDLDL
APCLCOFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFFEHIK
AKCBPJCJGIIJCMCFGNPCNHCFLK
AEFBJLBGMHPKNNAEBAGPOIOHGK
AAPHBAJIDGBJJMLDMFLOOBHPBK
AELFALJOICJGIHMJNGAIIKGJKK
DLLLLDLDDLDLLLLDLDDDDLDLDL
Disable GS1 DataBar Expanded
Stacked
Enable GS1 DataBar Expanded Stacked
APCLCOFOFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEGGEIK
AKCBPJCJGIIJCMCEGPIIKHEJJK
AEFBJLBGMHPKNIEIMPONAFMEGK
AAPHBAJIDFBOAMBBMPNNONKLBK
AELFAOKNCMBIEPDPNHKAMGGKIK
DDLLLDLDLDDLLLLDLDLDDLDLDL
APCLCOFOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEAEHIK
AKCBPJCJGIIJCMCEHOLEAIPHPK
AEFBJLBGMHPKNPDMDKJBKDHFGK
AAPHBAJICGFJFFLOCCJBIFMJHK
AFLFALLEOKCOOFHKHCNMEPBLKK
DDLLLDLDLDDLLLLDDDLDDLDLDL
Disable GS1 DataBar Stacked
Enable GS1 DataBar Stacked
APCLCOFMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFAGFIK
AKCBPJCJGIIJCMCEGIKAIDNHLK
AEFBJLBGMHPKNJDMFIJPPHDEGK
AAPHBAJJDBFCFFNKKJAHNABLFK
AFLFAMKDNFEGAGPICOFIOHLJJK
DLLLLDLDDLLLLLLDLLLDDLDLLL
APCLCOFMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFGEGIK
AKCBPJCJGIIJCMCEHJJMCMGJNK
AEFBJLBGMHPKNOEIKNODFBIFGK
AAPHBAJJCCBFAMHFEEELLIHJDK
AELFAJLKBDHAKMLNILCEGOMILK
DLLLLDLDDLLLLLLDDLLDDLDLLL
Product Reference Guide
66
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
2D Symbologies
PDF417
Disabled
Enabled
APCPGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFDBEIK
AKCBPJCJGIIJCMCFHMOHKAOJJK
AEFBJLBGMHPLNKAPNDDGDFPHGK
AAPHBAJJDHGHKNAINKBIFENDBK
AELFAMOOAMMACJGJHEHMCFFJKK
DLDLLDLDLDLLLLLDLLLDDLDLLL
APCPGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFFDHIK
AKCBPJCJGIIJCMCFGNNLAPFHPK
AEFBJLBGMHPLNNHLCGEKJDEGGK
AAPHBAJJCECAPEKHDHFEDMLBHK
AFLFAJPHMKPGIDCMNBAAKMCIIK
DLDLLDLDLDLLLLLDDLLDDLDLLL
Macro PDF417 Unbuffered Mode
Macro PDF417 Buffered Mode
APCLCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEADFIK
AKCBPJCJGIIJCMCFGKMJBLIDJK
AEFBJLBGMHPLMJCKJOPLIOJEGK
AAPHBAJICFHPPHFCCGMPOHFPFK
AGLFAPOKALBIEHBOHDIEMMGIIK
DLLLDLLDLLLLLLLDDLDDDLDLDL
APCLCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEGBGIK
AKCBPJCJGIIJCMCFHLPFLEDNPK
AEFBJLBGMHPLMOFOGLIHCICFGK
AAPHBAJIDGDIKOPNMLIDIPDNDK
AHLFAKPDMNCOONFLNGPIEFBJKK
DLLLDLLDLLLLLLLDLLDDDLDLDL
The following command carries out its specific function and does not require
reading the Enter or Exit and Save Configuration codes.
Abort Macro PDF417 Buffered Mode
AMHOHNBOHNGNENEIEPANHOGOCK
AHNBMBIMDKEOFMHMLJAKFDFGJK
AKCBPJCJGIIJCMCEHNJNLOIBNK
AEFBJLBGMHPLNLDJJICILJCHGK
AAPHBAJIDGAIDDPMENJHMACFDK
AELFAONOEEHGMMCDPDLGGHLLJK
DDLLLLLLLDDLLLLDDLDDDLDLDL
It stops buffering the read
codes at any time. All the
buffered codes will not be
saved.
MICRO PDF417
67
Disabled
Enabled
APCPGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEGBEIK
AKCBPJCJGIIJCMCEGPKBHPDLNK
AEFBJLBGMHPLNIDHPJMIHOGFGK
AAPHBAJJCHCHGEAFDNDHDAGFHK
AFLFAMMEGEHIELNKNAKIOACLKK
DDDLLDLDDLLLLLLDDLDDDLDLLL
APCPGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEADHIK
AKCBPJCJGIIJCMCEHOJNNAIFLK
AEFBJLBGMHPLNPEDAMLENINEGK
AAPHBAJJDEGADNKKNAHLFIAHBK
AELFAJNNKCEOOBJPHFNEGJFKIK
DDDLLDLDDLLLLLLDLLDDDLDLLL
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
DATAMATRIX FAMILY
Disabled
Enabled
APCPGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFBHGIK
AKCBPJCJGIIJCMCEHLIANOALLK
AEFBJLBGMHPLNKHIHCFOEDFGGK
AAPHBAJIDCBNKCHLKMBHLMHJBK
AFKFAIMFHPFKIFPHMKDIIGAIJK
DLLLLDLDDDDLLLLDDDLDDLDLDL
APCPGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFHFFIK
AKCBPJCJGIIJCMCEGKLMHBLFNK
AEFBJLBGMHPLNNAMIHCCOFOHGK
AAPHBAJICBFKPLNEEBFLNEBLHK
AEKFANNMLJGMCPLCGPEEAPHJLK
DLLLLDLDDDDLLLLDLDLDDLDLDL
Minimum Code Length
APCPFLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFCBFIK
AKCBPJCJGIIJCMCFHJPONGANLK
AEFBJLBGMHPLMLAKKKBKGJEFGK
AAPHBAJJDFHNNJIBKFBELNKLHK
AFLFAJJGCEJGIDBOOCNGMLCIIK
DLDLLDLDLDDLLLLDDLLDDLDLDL
Read the number in the
range 0001-3600.
Maximum Code Length
APCPFLFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEHBFIK
AKCBPJCJGIIJCMCEGKLIAJNPPK
AEFBJLBGMHPLMJDCIAOECCNHGK
AAPHBAJJCFDNBAIMECDLNJBNBK
AELFAJLMEMCOOBKNEGACAOFKIK
DDDLLDLDDLDLLLLDLLDDDLDLDL
Read the number in the
range 0001-3600.
Rectangular Style – Disabled
Rectangular Style - Enabled
APCPGKFMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEBCEIK
AKCBPJCJGIIJCMCFGOKDHIMFLK
AEFBJLBGMHPLMODOLEPNCFPEGK
AAPHBAJJDBBGKIHDEDIBCGALBK
AHLFAKIBGJFACCLBBAOOMPBLJK
DLLLLDLDDLDLLLLDLLLDDLDLDL
APCPGKFMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEHAHIK
AKCBPJCJGIIJCMCFHPJPNHHLNK
AEFBJLBGMHPLMJEKEBIBIDEFGK
AAPHBAJJCCFBPBNMKOMNEOGJHK
AGLFAPJIKPGGIIPELFJCEGGKLK
DLLLLDLDDLDLLLLDDLLDDLDLDL
QR FAMILY
Product Reference Guide
Disabled
Enabled
APCPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFHEIK
AKCBPJCJGIIJCMCFHJJOFGLDLK
AEFBJLBGMHPLMNDLNHKJOMCEGK
AAPHBAJJCDEGFMDHAJOHMMBDDK
AHLFANNFCDACMDEOICDGKAILKK
DDLLLDLDDLDLLLLDLLDDDLDLDL
APCPCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDFHIK
AKCBPJCJGIIJCMCFGIKCPJANNK
AEFBJLBGMHPLMKEPCCNFEKJFGK
AAPHBAJJDAABAFJIOEKLKEHBFK
AGLFAIMMOFDEGJALCHEKCJPKIK
DDLLLDLDDLDLLLLDDLDDDLDLDL
68
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
MICRO QR
Disabled
Enabled
POSTAL CODES FAMILY
69
All Disabled
Australian Post - Enabled
APCLGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEEDFIK
AKCBPJCJGIIJCMCEHPJNKNKBLK
AEFBJLBGMHPKNKDJDLMLDOOEGK
AAPHBAJJCDACKBJOODGBDKADHK
AFLFALPHJPBEOHAHLMIAIICJKK
DDLLLDLDDLLLLLLDLLDDDLDLLL
APCLGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALECBGIK
AKCBPJCJGIIJCMCEGOKBACBPNK
AEFBJLBGMHPKNNENMOLHJIFFGK
AAPHBAJJDAEFPIDBAOCNFCGBBK
AELFAOOOFJCCENECBJPMABFIIK
DDLLLDLDDLLLLLLDDLDDDLDLLL
Japan Post - Enabled
PLANET - Enabled
APCLGKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFHBEIK
AKCBPJCJGIIJCMCFHIOKIAONJK
AEFBJLBGMHPLMNDJBMCPNEMHGK
AAPHBAJICEANPNNDFBDMLLJPFK
AHLFANINAABCCAAKMOJMEEKIJK
DDLLLDLDDLLLLLLDLLDDDLDLLL
APCLGKHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALFDGFIK
AKCBPJCJGIIJCMCFGNKLOLJJPK
AEFBJLBGMHPKNJAAIFHNEAIGGK
AAPHBAJICEDDGCKHCJKIMKEPFK
AEKFAMPDDIEAIJBGFMDEEGMKIK
DDDLLDLDDLLLLLLDLLLDDLDLDL
POSTNET - Enabled
POSTNET with B and B' - Enabled
APCLGKHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJAKEGGHIK
AKCBPJCJGIIJCMCEHLOAGJGLLK
AEFBJLBGMHPLMJHEFHOFAMBEGK
AAPHBAJJDAHLGHEFHGLJCDLBBK
AHKFAPJAGBHAOEFOILFEADDKJK
DDDLLDLDDLLLLLLDDLLDDLDLDL
APCLGKHMHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJAKEAEEIK
AKCBPJCJGIIJCMCEGKNMMGNFNK
AEFBJLBGMHPLMOAAKCJJKKKFGK
AAPHBAJJCDDMDOOKJLPFELNDHK
AGKFAKIJKHEGEOBLCOCIIKELLK
DDDLLDLDDLLLLLLDLLLDDLDLDL
POSTNET and PLANET - Enabled
POSTNET with B and B' and PLANET Enabled
APCLGKHMHNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALFFEGIK
AKCBPJCJGIIJCMCFHMJHEECHJK
AEFBJLBGMHPKNOHEHAABOGDHGK
AAPHBAJIDHHEDLAIMEOEKCCNDK
AFKFAJOKPOHGCDFDPJEIMPLLKK
DDDLLDLDDLLLLLLDDLLDDLDLDL
APCLGKGMHNGNENEIEPANHOGOCK
AHHPMJIMDKEOFMHMLJAKEEFHIK
AKCBPJCJGIIJCMCFHNMFGLJLJK
AEFBJLBGMHPKNOBLDBLACNDGGK
AAPHBAJJDABIMJLFECPBEAKLBK
AFLFANKLDMHMMPBBAEMICMKLIK
DLDLLDLDLLDLLLLDLDLDDLDLDL
KIX Code - Enabled
Royal Mail Code (RM4SCC) - Enabled
APCLGKGMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFBFFIK
AKCBPJCJGIIJCMCEGLIOOJGJNK
AEFBJLBGMHPLMOGPODCIGBKEGK
AAPHBAJICEFAMMFHBNOAKJFFFK
AGLFAOMIGFEMKCFJNDKIGJFLJK
DLDLLDLDLLDLLLLDDDLDDLDLDL
APCLGKGMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFHHGIK
AKCBPJCJGIIJCMCEHKLCEGNHLK
AEFBJLBGMHPLMJBLBGFEMHBFGK
AAPHBAJIDHBHJFPIPAKMMBDHDK
AHLFALNBKDHKAIBMHGNEOACKLK
DLDLLDLDLLDLLLLDLDLDDLDLDL
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
AUSTRALIAN TABLE SELECTION
N Table
C Table
APCLGKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFBDFIK
AKCBPJCJGIIJCMCFGMNLHCHDPK
AEFBJLBGMHPKNIABBBDFHFHGGK
AAPHBAJJDDECGIJDAEEOFOLFBK
AELFALNNPHKMIFLEBIFEENFLKK
DLLLLDLDLDLLLLLDDLLDDLDLLL
APCLGKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFHBGIK
AKCBPJCJGIIJCMCFHNOHNNMNJK
AEFBJLBGMHPKNPHFOEEJNDMHGK
AAPHBAJJCAAFDBDMOJACDGNHHK
AFLFAOMEDBJKCPPBLNCIMECKIK
DLLLLDLDLDLLLLLDLLLDDLDLLL
IMB SELECTION
Disabled
Enabled
MAXICODE FAMILY
Product Reference Guide
Maxicode Mode 0 - Disabled
Maxicode Mode 0 Enabled
APCPCKFOBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGNMLNKJJNK
AEFBJLBGMHPKMPFNEDEGKHDEGK
AAPHBAJICBAJKABBHMMBCEFDDK
AELFANPINJGOIGDMLEEAIKCIKK
DLDLLDLDLLDLLLLDDDDDDLDLDL
APCPCKFOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFCEGIK
AKCBPJCJGIIJCMCEHMPHHFCHLK
AEFBJLBGMHPKMICJLGDKABIFGK
AAPHBAJIDCEOPJLOJBINEMDBFK
AFLFAIOBBPFICMHJBBDMADFJIK
DLDLLDLDLLDLLLLDLDDDDLDLDL
Maxicode Mode 1 - Disabled
Maxicode Mode 1 - Enabled
APCPCKFMDNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKECGEIK
AKCBPJCJGIIJCMCEGKODPOAHPK
AEFBJLBGMHPKMOCJNEDEFFMEGK
AAPHBAJJCFEFPJNKBKBLBJODHK
AFLFAPPGCADAMPPLENLIKLPLLK
DDDLLDLDDDLLLLLDDLDDDLDLLL
APCPCKFMDNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEEEHIK
AKCBPJCJGIIJCMCEHLNPFBLJJK
AEFBJLBGMHPKMJFNCBEIPDHFGK
AAPHBAJJDGACKAHFPHFHHBIBBK
AELFAKOPOGAGGFLOOIMECCIKJK
DDDLLDLDDDLLLLLDLLDDDLDLLL
Maxicode Mode 2 - Disabled
Maxicode Mode 2 - Enabled
APCPCKFMBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFHGEIK
AKCBPJCJGIIJCMCFHJKFCBNFLK
AEFBJLBGMHPKMMBBPOMKBOFGGK
AAPHBAJJDFAFDANHPNDEHNFFBK
AELFAPNMEIIIKNEIOJGMGOIJLK
DLDLLDLDLLLLLLLDLLLDDLDLLL
APCPCKFMBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFBEHIK
AKCBPJCJGIIJCMCFGIJJIOGLNK
AEFBJLBGMHPKMLGFALLGLIOHGK
AAPHBAJJCGECGJHIBAHIBFDHHK
AFLFAKMFIOLOAHANEMBAOHPIJK
DLDLLDLDLLLLLLLDDLLDDLDLLL
Maxicode Mode 3 - Disabled
Maxicode Mode 3 - Enabled
APCPCKHKHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEFBGIK
AKCBPJCJGIIJCMCFGJINMMPLJK
AEFBJLBGMHPKMPHJJGCHCNFFGK
AAPHBAJJCFBENOJCIIMFBFDLFK
AGLFAMNNLJDOOBHNMIJIGENJIK
DDLLLDLDDLLLLLLDDLDDDLDLLL
APCPCKHKHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEDDFIK
AKCBPJCJGIIJCMCFHILBGDEFPK
AEFBJLBGMHPKMIANGDFLILOEGK
AAPHBAJJDGFDIHDNGFIJHNFJDK
AHLFAJMEHPAIELDIGNOEONKIKK
DDLLLDLDDLLLLLLDLLDDDLDLLL
70
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
Maxicode Mode 4 - Disabled
Maxicode Mode 4 - Enabled
APCPCKHKFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFABGIK
AKCBPJCJGIIJCMCEHKMLBDCJNK
AEFBJLBGMHPKMNEBLMNJGGMHGK
AAPHBAJJDFFEBHJPGPOKHBINDK
AHLFAMPHNBIGIDMOGMEMKBKLIK
DLLLLDLDLDLLLLLDLLLDDLDLLL
APCPCKHKFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFGDFIK
AKCBPJCJGIIJCMCEGLPHLMJHLK
AEFBJLBGMHPKMKDFEJKFMAHGGK
AAPHBAJJCGBDEODAICKGBJOPFK
AGLFAJOOBHLACJILMJDACINKKK
DLLLLDLDLDLLLLLDDLLDDLDLLL
Maxicode Mode 5 - Disabled
Maxicode Mode 5 - Enabled
APCPCKHIHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEGBHIK
AKCBPJCJGIIJCMCEHNODDHLHPK
AEFBJLBGMHPKMMDFCLKLJEDHGK
AAPHBAJIDBBIEOFEAJDAEMDNHK
AGLFAOPJCINIMKAJJFLEIAHIJK
DDLLLDLDDLDLLLLDLDLDDLDLDL
APCPCKHIHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEADEIK
AKCBPJCJGIIJCMCEGMNPJIAJJK
AEFBJLBGMHPKMLEBNONHDCIGGK
AAPHBAJICCFPBHPLOEHMCEFPBK
AHLFALOAOOOOGAEMDAMIAJAJLK
DDLLLDLDDLDLLLLDDDLDDLDLDL
Maxicode Mode 6 - Disabled
Maxicode Mode 6 - Enabled
APCPCKHIFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFDBHIK
AKCBPJCJGIIJCMCFGOKFOIGFLK
AEFBJLBGMHPKMOANABFFNPKFGK
AAPHBAJICBFIIHFJOOBPCIILBK
AHLFAONDEAGAKILKDBGAEFAKJK
DLLLLDLDLDDLLLLDDDDDDLDLDL
APCPCKHIFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFFDEIK
AKCBPJCJGIIJCMCFHPJJEHNLNK
AEFBJLBGMHPKMJHJPECJHJBEGK
AAPHBAJIDCBPNOPGADFDEAOJHK
AGLFALMKIGFGACPPJEBMMMHLLK
DLLLLDLDLDDLLLLDLDDDDLDLDL
AZTEC
71
Disabled
Enabled
APCLGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEGFHIK
AKCBPJCJGIIJCMCFHIPKNDEDJK
AEFBJLBGMHPKNKEOJKKDEIEFGK
AAPHBAJICGHIKOONJFGONCKJHK
AEKFAPNMOMIOELJJACMECLHIJK
DDDLLDLDLLDLLLLDDDDDDLDLDL
APCLGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEAHEIK
AKCBPJCJGIIJCMCFGJMGHMPNPK
AEFBJLBGMHPKNNDKGPNPOOPEGK
AAPHBAJIDFDPPHECHICCLKMLBK
AFKFAKMFCKLIOBNMKHLIKCAJLK
DDDLLDLDLLDLLLLDLDDDDLDLDL
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CODE SELECTION
COMPOSITE CODES
Before enabling this symbology, it is necessary to enable the linear barcode
family (among GS1 DATABAR, EAN128 or UPC/EAN) contained in the composite code to be read.
Product Reference Guide
Disabled
Enabled
APCLCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALECFFIK
AKCBPJCJGIIJCMCEHKOEFLPLJK
AEFBJLBGMHPKMNANDPFEOHDHGK
AAPHBAJJDHCDFAKBDAJOKCMDFK
AGLFAKMMLANGANCAEKMKANPLKK
DLDLLDLDLDDLLLLDLLLDDLDLDL
APCLCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEEHGIK
AKCBPJCJGIIJCMCEGLNIPEEFPK
AEFBJLBGMHPKMKHJMKCIEBIGGK
AAPHBAJJCEGEAJAONNNCMKKBDK
AHLFAPNFHGOAKHGFOPLGIEIKIK
DLDLLDLDLDDLLLLDDLLDDLDLDL
Keep Linear Part
Discard Linear Part
APCLCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFHFFIK
AKCBPJCJGIIJCMCFGJKCIECJNK
AEFBJLBGMHPKMPDFBFKKKMKFGK
AAPHBAJJCHGDJJKMNHLBMGHFDK
AHLFAKOGNIGOGPJDOOBOMIIJKK
DDDLLDLDDLDLLLLDDLDDDLDLDL
APCLCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFBHGIK
AKCBPJCJGIIJCMCFHIJOCLJHLK
AEFBJLBGMHPKMIEBOANGAKBEGK
AAPHBAJJDECEMAADDKPNKOBHFK
AGLFAPPPBOFIMFNGELGCEBPIIK
DDDLLDLDDLDLLLLDLLDDDLDLDL
72
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
READING PARAMETERS
READING PARAMETERS
TRIGGER MODE
Trigger Level
Trigger Pulse
APCOCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEAGGIK
AKCBPJCJGIIJCMCFGILHGJEHJK
AEFBJLBGMHPLNJAKKIEPNIOFGK
AAPHBAJJCAHEBANDBIMIMMMLBK
AEKFALNAJKBEGAIEALHCAKNIJK
DLLLLLLDLLLLLLLDDLLDDLDLDL
APCOCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEGEFIK
AKCBPJCJGIIJCMCFHJILMGPJPK
AEFBJLBGMHPLNOHOFNDDHOFEGK
AAPHBAJJDDDDEJHMPFIEKEKJHK
AFKFAOMJFMCCMKMBKOAOIDKJLK
DLLLLLLDLLLLLLLDLLLDDLDLDL
TRIGGER TYPE
Normal Trigger
Software Trigger
APCOCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCEHLPBLGJFNK
AEFBJLBGMHPLNLDCICLBJDHHGK
AAPHBAJJDADENJNOPPOHKIHNHK
AFKFALPKPCKMACDHKPKGMPKKJK
DDLLLLLDDDLLLLLDLLDDDLDLDL
APCOCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFDEFIK
AKCBPJCJGIIJCMCEGKMNBJCLLK
AEFBJLBGMHPLNMEGHHMNDFMGGK
AAPHBAJJCDHDIAHBBCKLMABPBK
AEKFAOODDEJKKIHCAKNKEGNLLK
DDLLLLLDDDLLLLLDDLDDDLDLDL
FLASH MODE
Flash ON Duration
Read a number in the range 
01-99, which corresponds to
a max 9.9 seconds duration.
APCKBLDKFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFBEFIK
AKCBPJCJGIIJCMCEHLIMMGBPLK
AEFBJLBGMHPLMKDCNBIMCELEGK
AAPHBAJIDCENBFNMNPOPKPPLBK
AGKFAMNAGIEEEEGBLADKIBMJJK
DDDLLLLLLDLLLLLDLLLDDLDLDL
Flash OFF Duration
Read a number in the range 
01-99, which corresponds to
a max 9.9 seconds duration.
APCKBLDIHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEHEEIK
AKCBPJCJGIIJCMCEHMKEOCIBJK
AEFBJLBGMHPLMLEGEGPONGEEGK
AAPHBAJJDGABEMBHLJDFJCELFK
AHKFAONOJBBKANKGEJMCKABKIK
DLDLLLLLDLDLLLLDLDLDDLDLLL
BEEPER TONE
73
Tone 1
Tone 2
APDNCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFDDFIK
AKCBPJCJGIIJCMCEGLNHEOKPJK
AEFBJLBGMHPLNIDKIIGKFCEEGK
AAPHBAJJDHAGBIKHCMHKLKKHHK
AHKFALKEEGHAIGJCOHOKIKDJIK
DLDLLLLDDDLLLLLDLDLDDLDLDL
APDNCKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEGDHIK
AKCBPJCJGIIJCMCFHNJMMMFNNK
AEFBJLBGMHPKMIEOFKPCBONGGK
AAPHBAJICDEOBNEFHDGLFDFJDK
AEKFAIMHBPEAOLNKDAIKMPMJJK
DLDLLLLDDDLLLLLDDDLDDLDLDL
Tone 3
Tone 4
APDNCKHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALECEGIK
AKCBPJCJGIIJCMCFGINNKHCJLK
AEFBJLBGMHPLNMHHMDKAIKJHGK
AAPHBAJICDHAICDBALPPCCIJDK
AHLFAJLJCHBCECMGKCCCMNKLIK
DLLLLLLDDDLLLLLDDDDDDLDLLL
APDNCKHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJAKFHEEIK
AKCBPJCJGIIJCMCEHOJGCFNLPK
AEFBJLBGMHPKMMADBBDIMGAFGK
AAPHBAJJDHDIIHNDFEOOMLHHHK
AELFAKNKHOCCCPIOHFECIIFLJK
DLLLLLLDDDLLLLLDLDDDDLDLLL
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
READING PARAMETERS
BEEPER VOLUME
Beeper OFF
Low Volume
APDNCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEABGIK
AKCBPJCJGIIJCMCFGJKNDOMDLK
AEFBJLBGMHPLNNHGFHOILPGHGK
AAPHBAJJDEABIIAFCGBJLGHDHK
AHKFAOJHOIPOEOGEOGECMGDKKK
DDDLLLLDLLLLLLLDLDDDDLDLDL
APDNCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEGDFIK
AKCBPJCJGIIJCMCFHIJBJBHNNK
AEFBJLBGMHPLNKACKCJEBJNGGK
AAPHBAJJCHEGNBKKMLFFNOBBBK
AGKFALIOCOMIOECBEDDOEPELIK
DDDLLLLDLLLLLLLDDDDDDLDLDL
Medium Volume
High Volume
APDNCKHMFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFDDHIK
AKCBPJCJGIIJCMCEGONKBDIPJK
AEFBJLBGMHPKMKHGHAAMFFEEGK
AAPHBAJIDDAONEEIJEEEDHOPFK
AFKFAIONHHPIIJGJJEFOAKLLJK
DDDLLLLDLLLLLLLDLDDDDLDLDL
APDNCKHMFNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALFHEGIK
AKCBPJCJGIIJCMCEHLJLHIPLPK
AEFBJLBGMHPLNOEPOJFOMBAFGK
AAPHBAJIDDDAELDMOMNAEGDPFK
AGLFAJJDEPKKCAHFAGPGAINJIK
DDLLLLLDLLLLLLLDLDLDDLDLLL
BEEPER DURATION
Beeper Duration
Read a number in the range 
01-99, which corresponds to
a max 99 ms duration.
APDNBLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFGHFIK
AKCBPJCJGIIJCMCFHIJFOJBHPK
AEFBJLBGMHPLMODMKFFCNOOGGK
AAPHBAJICDCBDKPCMIDFNDBHHK
AGLFAPOONLIKCKDOGKHIEOGILK
DLLLLLLDLDLLLLLDDLLDDLDLDL
READS PER CYCLE
One Read per Cycle
Multiple Reads per Cycle
APCKGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFDEFIK
AKCBPJCJGIIJCMCFGJNDOMLHLK
AEFBJLBGMHPKMOHPOFEFHMIEGK
AAPHBAJICFEKOCAJIEEBNCHBFK
AHLFAJNJFFJIOIFDILIAIBCLKK
DLDLLLLDDLLLLLLDLDLDDLDLDL
APCKGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCFHIOPEDAJNK
AEFBJLBGMHPKMJALBADJNKDFGK
AAPHBAJIDGANLLKGGJANLKBDDK
AGLFAMMAJDKOECBGCOPMAIFKIK
DLDLLLLDDLLLLLLDDDLDDLDLDL
AIMING SYSTEM DELAY
Product Reference Guide
Disable
Enable Short
APCKFLHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEDAHIK
AKCBPJCJGIIJCMCFHLLFEDANPK
AEFBJLBGMHPLNKFJJDAOBCHGGK
AAPHBAJIDBCAJHMPIMFJGHPPBK
AFLFAMICPKJMEOBLKLLCKGHIIK
DDDLLDLDDLDLLLLDDDDDDLDLDL
APCKFLHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJALEHHGIK
AKCBPJCJGIIJCMCFGOPECIHJJK
AEFBJLBGMHPKMOGAAKFMIGDHGK
AAPHBAJIDBBOAILLPEMNBGCPBK
AGKFANPMMCMOOHAHDJBKKEBKJK
DDLLLDLDDLDLLLLDDDLDDLDLLL
Enable Medium
Enable Long
APCKFLGMHNGNENEIEPANHOGOCK
AHHPMJIMDKEOFMHMLJALEFEGIK
AKCBPJCJGIIJCMCEGINBCKIJLK
AEFBJLBGMHPLNJAPGMAJKHBFGK
AAPHBAJIDBHNKGELMAIFHFDFBK
AELFAPMHJPMCMMEILGIGILILIK
DLLLLDLDLLLLLLLDLLLDDLDLLL
APCKFLGMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKEHBEIK
AKCBPJCJGIIJCMCEGMKMOOEDLK
AEFBJLBGMHPKMKECAACHJFOFGK
AAPHBAJICCAEGAJAFFFNGMIHHK
AGKFALKAGBKGMPBBIBFCAAJILK
DLDLLDLDLLLLLLLDDLDDDLDLDL
74
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
READING PARAMETERS
GOOD READ SPOT
Disable
Enable Short
APCOCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFHFHIK
AKCBPJCJGIIJCMCFGKKAEDJHLK
AEFBJLBGMHPLMNBODJGILAEEGK
AAPHBAJICBEKCEPPLMKNKJGFFK
AHKFAILCIGOKGPMMHEJCKLILIK
DLDLLDLDLDDLLLLDDDDDDLDLDL
APCOCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFBHEIK
AKCBPJCJGIIJCMCFHLJMOMCJNK
AEFBJLBGMHPLMKGKMMBEBGPFGK
AAPHBAJIDCANHNFAFBOBMBAHDK
AGKFANKLEANMMFIJNBOOCCPKKK
DLDLLDLDLDDLLLLDLDDDDLDLDL
Enable Medium
Enable Long
APCOCOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEEHGIK
AKCBPJCJGIIJCMCEGNNHGONLJK
AEFBJLBGMHPKNKBOBOIMFKGHGK
AAPHBAJJCGEFHILCAOPACIPJHK
AFKFAOMIBJOMKIMBAGIOGHAKLK
DLDLLDLDLDDLLLLDDDDDDLDLDL
APCOCOHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALEAAHIK
AKCBPJCJGIIJCMCEHIJGAFKPPK
AEFBJLBGMHPLMOCHIHNOMOCGGK
AAPHBAJJCGHLOHMGHGGEFJCJHK
AGLFAPLGCBLOABNNJECGGFGIKK
DLLLLDLDLDDLLLLDDDLDDLDLLL
Enable Continuous
SCAN TIMEOUT
Define Timeout
APCKBPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFBFIK
AKCBPJCJGIIJCMCEGPJJEPGJPK
AEFBJLBGMHPKNPDDECLBFAIEGK
AAPHBAJJCBAMPCACDANOIIBHDK
AGLFAJNBKGHKIIKPNCNOOEGLKK
DDDLLLLDDLLLLLLDLLLDDLDLDL
Read a number in the range 
01-99, which corresponds to a max
99 seconds duration. The timeout
is activated when the decoding fails.
User Defined Beeper
USER DEFINED BEEPER TONE
75
Tone 1
Tone 2
APDNCKFOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCFHJNMMMPPLK
AEFBJLBGMHPLMNAINJLLMGBGGK
AAPHBAJJDAEBELGEKFDGBNGFDK
AELFALOOKJCEGIBDMEMEOCPJJK
DDDLLLLDLDDLLLLDDDLDDLDLLL
APDNCKFOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEAGEIK
AKCBPJCJGIIJCMCEGPJHEOANPK
AEFBJLBGMHPKNNHMALCDIKIEGK
AAPHBAJICEAJEOIGPKCHPEJLHK
AHLFAIINPABEAFFLBDKEKHAJIK
DDDLLLLDLDDLLLLDLDLDDLDLLL
Tone 3
Tone 4
APDNCKFOFNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKEEBFIK
AKCBPJCJGIIJCMCEHKNGCFHJJK
AEFBJLBGMHPLMJEFJCHBBOMFGK
AAPHBAJICEDHNBPCICLDIFELHK
AEKFAJPDMIEGKMEHIBAMKFGLJK
DDLLLLLDLDDLLLLDLDDDDLDLDL
APDNCKFOFNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJALFBBHIK
AKCBPJCJGIIJCMCFGMJNKHILNK
AEFBJLBGMHPKNJDBEAOJFCFHGK
AAPHBAJJDAHPNEBANNKCGMLFDK
AHKFAKJAJBHGMBAPFGGMOAJLIK
DDLLLLLDLDDLLLLDDDDDDLDLDL
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
READING PARAMETERS
USER DEFINED BEEPER VOLUME
Beeper OFF
Low Volume
APDNCKFMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEFEEIK
AKCBPJCJGIIJCMCFGPMIEHNPPK
AEFBJLBGMHPLMLAILLLFJCFHGK
AAPHBAJICHEKELAACOKAEILHBK
AELFAMPJJGEMILJBJIEAEKFLKK
DLDLLLLDDLLLLLLDLLLDDLDLDL
APDNCKFMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEDGHIK
AKCBPJCJGIIJCMCFHOPEOIGBJK
AEFBJLBGMHPLMMHMEOMJDEOGGK
AAPHBAJIDEANBCKPMDOMCANFHK
AFLFAJOAFAHKCBNEDNDMMDCKIK
DLDLLLLDDLLLLLLDDLLDDLDLDL
Medium Volume
High Volume
APDNCKFMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFGGFIK
AKCBPJCJGIIJCMCEGILPGKJDNK
AEFBJLBGMHPKNMAIJMFBHIHEGK
AAPHBAJJCAEFBHENJMPNMJCLDK
AGLFAKIDAJEKEMJMOKFMIGNKJK
DLDLLLLDDLLLLLLDLLLDDLDLDL
APDNCKFMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALFCBEIK
AKCBPJCJGIIJCMCEHNPOABOHLK
AEFBJLBGMHPLMIDBAFADOMDFGK
AAPHBAJJCAHLIIDJOEGJLIPLDK
AFKFALPNDBBIOFIAHIPEIELIIK
DLLLLLLDDLLLLLLDLLDDDLDLLL
USER DEFINED BEEPER DURATION
Set Duration
Read a number in the range 
01-99, which corresponds to
a max 990 ms duration.
APDNBLFMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEAHEIK
AKCBPJCJGIIJCMCFHPLNMNIJNK
AEFBJLBGMHPLMPEIDCCACMBGGK
AAPHBAJJCHGNGDDJKOOPOOKHDK
AHLFANOACCNEGDPJJDIAGPLLKK
DDLLLLLDDLDLLLLDDDLDDLDLLL
TEST USER DEFINED BEEPER
The following command carries out its specific function and does not require reading the Enter
or Exit and Save Configuration codes.
Test User Defined Beeper
AMHOHNGODNGNENEIEPANHOGOCK
AHPHKJIMDKEOFMHMLJAKFEFGJK
AKCBPJCJGIIJCMCEGLLMFFCNLK
AEFBJLBGMHPLMKFGLMPMEBIEGK
AAPHBAJIDFHCJCKKJOFFLOMLDK
AHKFAOLIHAMCMHFJDPCCOPEKKK
DDDLLLLDLLLLLLLDDLDDDLDLDL
See "Beeper" on page 122 for details.
Product Reference Guide
76
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
READING PARAMETERS
Code Ordering and Selection
CODES PER SCAN
One Code per Scan
All Codes per Scan
APCKGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEGEFIK
AKCBPJCJGIIJCMCEHKJFDDGFPK
AEFBJLBGMHPKMMEHMPLLDHBGGK
AAPHBAJIDFAKCLAEGDGOLGMHDK
AGLFAJPDDNCAIKOACPFEEEFJKK
DDDLLLLDLDLLLLLDDDDDDLDLDL
APCKGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEAGGIK
AKCBPJCJGIIJCMCEGLKJJMNLJK
AEFBJLBGMHPKMLDDDKMHJBKHGK
AAPHBAJICGENHCKLIOCCNOKFFK
AHLFAMOKPLBGCAKFIKCIMNCIIK
DDDLLLLDLDLLLLLDLDDDDLDLDL
CENTRAL CODE TRANSMISSION
The following command is available when working in "one code per scan.”
Disabled
Enabled
APBPCOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEHGEIK
AKCBPJCJGIIJCMCEGNNCGFELLK
AEFBJLBGMHPKMIBIIDEEJMGEGK
AAPHBAJICCEGCICHCIIKAKHBBK
AGKFAKIIPDMIAKGAKBKGGBCIJK
DLDLLLLDDDDLLLLDLLLDDLDLLL
APBPCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEBEHIK
AKCBPJCJGIIJCMCEHMOOMKPFNK
AEFBJLBGMHPKMPGMHGDIDKNFGK
AAPHBAJIDBABHBIIMFMGGCBDHK
AHKFAPJBDFPOKACFAENKOIFJLK
DLDLLLLDDDDLLLLDDLLDDLDLLL
See "Defining Data Formatting" on page 16 for details.
ORDER BY CODE LENGTH
The following command is available when working in "all codes per scan.”
Disabled
Enabled - Increasing Order
APBPCOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCFHOJELKJJPK
AEFBJLBGMHPKMKCAKJLKNHPGGK
AAPHBAJIDCAGOBCKMPKFGOMHHK
AHKFAKKCJLHAGINDAFHCKEFKJK
DDDLLLLDLLDLLLLDDLDDDLDLLL
APBPCOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFEEHIK
AKCBPJCJGIIJCMCFGPKIBFCHJK
AEFBJLBGMHPKMNFEFMMGHBEHGK
AAPHBAJICBEBLIIFCCOJAGKFBK
AGKFAPLLFNEGMCJGKAAOCNCLLK
DDDLLLLDLLDLLLLDLLDDDLDLLL
Enabled - Decreasing Order
APBPCOHMFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEBEFIK
AKCBPJCJGIIJCMCEHJODJHNFNK
AEFBJLBGMHPLNNCAIOFODNNFGK
AAPHBAJJDFAJLNGHHNPIOPFLFK
AFKFAMNIAEHGKPNOHHGOGINLKK
DDDLLLLDLLDLLLLDDLDDDLDLLL
77
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
READING PARAMETERS
ORDER BY CODE SYMBOLOGY
The following command is available when working in "all codes per scan".
Set Order
APBPBPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEEAHIK
AKCBPJCJGIIJCMCFGPKMGNENLK
AEFBJLBGMHPKNJGKFLAALGHHGK
AAPHBAJJCFCGFDNNCBIJALKDHK
AGLFALNLKIAEAMIJIJEICMAIIK
DLLLLLLDLDDLLLLDLDLDDLDLLL
Select the number of codes in
the range 0-9.
Select the Datalogic
Standard Code Identifier for
each above defined code
from the table in
Appendix C.
See "Defining Data Formatting" on page 16 for details.
Autoscan
AUTOSCAN MODE
Disabled
Enabled in Normal Mode
APCOCKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALECAEIK
AKCBPJCJGIIJCMCEGPNABHKFLK
AEFBJLBGMHPLNJHNAJCHKOEEGK
AAPHBAJICFAOBPKAGOMHCEGBBK
AFLFAPPLOJIOMMBKLFDGKJIJKK
DLDLLLLDDLDLLLLDLDLDDLDLLL
APCOCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEECHIK
AKCBPJCJGIIJCMCEHOOMLIBLNK
AEFBJLBGMHPLNOAJPMFLAIPFGK
AAPHBAJIDGEJEGAPIDILEMADHK
AELFAKOCCPLIGGFPBAEKCAPIIK
DLDLLLLDDLDLLLLDDDLDDLDLLL
Enabled in Pattern Mode
APCOCKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFBCFIK
AKCBPJCJGIIJCMCFGIKHDKOJJK
AEFBJLBGMHPKMOHNCOMDEEGHGK
AAPHBAJJCCABEDONNMJKKFPNDK
AHLFAJIBHGIIALBHMHCKGFAIJK
DLDLLLLDDLDLLLLDLDLDDLDLLL
See "Autoscanning" on page 16 for details.
AUTOSCAN AIMING SYSTEM
Product Reference Guide
Disabled
Enabled
APCOCKHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFHAEIK
AKCBPJCJGIIJCMCFHMJGMIHHPK
AEFBJLBGMHPLNLEFCDNJOFNGGK
AAPHBAJIDFEONGKNIJOIEANHHK
AELFAPNBIBDGKOKJBBOCGMPLKK
DDDLLLLDLDDLLLLDDDDDDLDLLL
APCOCKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFBCHIK
AKCBPJCJGIIJCMCFGNKKGHMJJK
AEFBJLBGMHPLNMDBNGKFEDGHGK
AAPHBAJICGAJIPACGEKECILFBK
AFLFAKMIEHAAAEOMLEJOOFIKIK
DDDLLLLDLDDLLLLDLDDDDLDLLL
78
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
READING PARAMETERS
AUTOSCAN HARDWARE TRIGGER
Disabled
Enabled
APCOCKFOHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFBFHIK
AKCBPJCJGIIJCMCEGOJNEKCHNK
AEFBJLBGMHPLMOHHHCAIHBIEGK
AAPHBAJIDCAJIFGOAAKEOHBFDK
AHKFAPJLGOGCEACIDCMMAEDLLK
DLDLLLLDDDLLLLLDLDDDDLDLDL
APCOCKFOHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFHHEIK
AKCBPJCJGIIJCMCEHPKBOFJJLK
AEFBJLBGMHPLMJADIHHENHDFGK
AAPHBAJICBEONMMBONOIIPHHFK
AGKFAKICKIFEOKGNJHLAINEKJK
DLDLLLLDDDLLLLLDDDDDDLDLDL
AUTOSCAN ILLUMINATION SYSTEM
Disabled
Enabled
APCOCKFOFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEEFHIK
AKCBPJCJGIIJCMCFHNNLJFPFJK
AEFBJLBGMHPLMMEPFIPGDKBGGK
AAPHBAJICCEJEMGDOHILIDKDFK
AGKFAPLBAGNKCCJLJGBIMBEJLK
DDDLLLLDLLLLLLLDDDLDDLDLDL
APCOCKFOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKECHEIK
AKCBPJCJGIIJCMCFGMOHDKELPK
AEFBJLBGMHPLMLDLKNIKJMKHGK
AAPHBAJIDBAOBFMMAKMHOLMBDK
AHKFAKKIMAOMIINODDGEEIDIJK
DDDLLLLDLLLLLLLDLDLDDLDLDL
The following commands can be activated only when One Code per Scan is
enabled.
SAFETY TIME
Disabled
Enabled
APCOGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFBDHIK
AKCBPJCJGIIJCMCFGPNJLFMNJK
AEFBJLBGMHPLNKCKDNPHGJJHGK
AAPHBAJIDFGLNFMAGPFCDBKFHK
AEKFAJIJKJCIIFOLICNICOFJIK
DDLLLDLDDLLLLLLDDDLDDLDLLL
APCOGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFHBEIK
AKCBPJCJGIIJCMCFHOOFBKHDPK
AEFBJLBGMHPLNNFOMIILMPCGGK
AAPHBAJICGCMIMGPICBOFJMHBK
AFKFAMJAGPBOCPKOCHKEKHCIKK
DDLLLDLDDLLLLLLDLDLDDLDLLL
Valid only with software trigger or
autoscan enabled.
See "Safety Time" on page 114 for details.
SAFETY TIME DURATION
Set Duration
APCOFPHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFEAHIK
AKCBPJCJGIIJCMCFHPKMDPJLLK
AEFBJLBGMHPLNOGKLEGCNHNGGK
AAPHBAJJDFEMPNPJOPBNJHLFFK
AHKFAIJABNLAGNIDIJBIALLJIK
DLDLLDLDDLDLLLLDLLLDDLDLDL
Read a number in the range 
01-99, where 01 corresponds to 100
ms and 99 to 9.9 seconds.
STAND AUTOSCAN MODE
Disable
Normal
APCOCKFMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFCFGIK
AKCBPJCJGIIJCMCFHKPDLBGLLK
AEFBJLBGMHPLMNDLMPIEMIOGGK
AAPHBAJJCGAFBFKIIBFBLOBDBK
AHKFANLPPPIEGLFMGPOAOAJKKK
DLDLLLLDDDDLLLLDDLLDDLDLLL
APCOCKFMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFEHFIK
AKCBPJCJGIIJCMCFGLMPBONFNK
AEFBJLBGMHPLMKEPDKPIGOFHGK
AAPHBAJJDFECEMAHGMBNNGHBHK
AGKFAIKGDJLCMBBJMKJMGJOLIK
DLDLLLLDDDDLLLLDLLLDDLDLLL
Pattern
APCOCKFMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEBHHIK
AKCBPJCJGIIJCMCEHNIEJMCHJK
AEFBJLBGMHPKNKDLOIGACCMFGK
AAPHBAJICBAKEJOFDDAMDPIPDK
AFKFALMFGAICKMFBBNPMCMBLJK
DLDLLLLDDDDLLLLDDLLDDLDLLL
79
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
CAPTURE IMAGE
CAPTURE IMAGE
In order to capture an image, you should read one of these codes (for further details see "Image
Capturing" on page 15), then point at the image subject and pull the trigger. The image will be
captured and sent to the host PC according to the Preset Configuration.
Product Reference Guide
Capture Image using Preset 1
Capture Image using Preset 2
AMHOHNBOHNGNENEIEPANHOGOCK
AHLLMBIMDKEOFMHMLJAKEAGHJK
AKCBPJCJGIIJCMCFGNOHPCPFPK
AEFBJLBGMHPKMJAIMKEHDCDFGK
AAPHBAJICFDBLOPJLLLDINFJHK
AGLFAMIDGOMEEPCBGGNAIGCKIK
DLDLLLLLDDLLLLLDLLDDDLDLLL
AMHOHNBOHNGNENEIEPANHOGOCK
AHLJOBIMDKEOFMHMLJALEBAHJK
AKCBPJCJGIIJCMCEGKLDJDCHNK
AEFBJLBGMHPLMMDJHFAKOIPGGK
AAPHBAJIDEFNILIMEJKHDCCJHK
AEKFAPIEJAFCCKBLOMCOGKEJLK
DDDLLLLLDLDLLLLDDDDDDLDLDL
Capture Image using Preset 3
Capture Image using Preset 4
AMHOHNBOHNGNENEIEPANHOGOCK
AHLJMBIMDKEOFMHMLJAKEEHGJK
AKCBPJCJGIIJCMCEHMJAAMGPPK
AEFBJLBGMHPLNJAFIAEKDLGHGK
AAPHBAJIDBCENNFBMABFEPANDK
AHLFAPLLBHMECODCDJBCENMLLK
DLDLLLLLDLLLLLLDDLDDDLDLDL
AMHOHNBOHNGNENEIEPANHOGOCK
AHJLOBIMDKEOFMHMLJALEHAFJK
AKCBPJCJGIIJCMCEGMPKJGGNLK
AEFBJLBGMHPLNMCMJLMHOEAGGK
AAPHBAJJDCFDMMNDJIGDNFCBDK
AHKFAPPKGLEEMKLOEBLAEPPKIK
DDLLLLLLDDLLLLLDLDDDDLDLDL
80
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
ADVANCED IMAGE CAPTURE
Image Preset 1
Basic Configuration
IMAGE FORMAT – PRESET 1
JPEG Format
TIFF Format
APCNCOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEDCHIK
AKCBPJCJGIIJCMCEGPNOGGANPK
AEFBJLBGMHPLMKFBNBGPNBOGGK
AAPHBAJIDCDIINDPLNNMBPHDDK
AHKFAKLKHBAAABKDCLIOAJKKKK
DDDLLLLDLDLLLLLDDLDDDLDLLL
APCNCOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFGCFIK
AKCBPJCJGIIJCMCFHJJFOEPPLK
AEFBJLBGMHPKNKCFADPHJNHEGK
AAPHBAJJCGHAIINNOCMNPGINHK
AEKFAJNJCIDAGMOLPMOOEMFKLK
DDDLLLLDLDLLLLLDLLDDDLDLLL
JPEG QUALITY FACTOR – PRESET 1
JPEG Quality Factor
APCNBPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEGGHIK
AKCBPJCJGIIJCMCFHMJMMBLFJK
AEFBJLBGMHPLNMFHPMFHFNEEGK
AAPHBAJJCGBPKPGKFJJDHGMDDK
AGLFAOPAOMPKKNAPKGBMMNPLJK
DDLLLLLDDDLLLLLDLDDDDLDLLL
81
Set the JPEG compression
level in the range 000-100.
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
Advanced Configuration
BRIGHTNESS – PRESET 1
Increase
Read a number in the range 
0-100
APCNCOHKHNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKFDCELK
ADPCPJCJGIIJCMCFHIPPHGLNOK
AIFBJLBGMHPLMJBELBBMIHELKK
AAPHBAJIDEFLCNGDNKIBEPHFDK
AHKFAKONFOAIGBMDPPNIMEPLJK
DLLLLLLDLLDLLLLDDDDDDLDLLL
Decrease
Read a number in the range 
0-100
APCNCOHKHNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKFFAHLK
ADPCPJCJGIIJCMCFGJMDNJADIK
AIFBJLBGMHPLMOGAEEGACBPKKK
AAPHBAJICHBMHEMMDHMNCHBHFK
AGKFAPPEJIDOMLIGFKKEENIKLK
DLLLLLLDLLDLLLLDLDDDDLDLLL
CONTRAST – PRESET 1
Increase
APCNCOHKFNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKEAHGLK
ADPCPJCJGIIJCMCFHMJOMMJHKK
AMFBJLBGMHPKNMFIBIAGONHKKK
AAPHBAJJDFDKCBCCHIOFJIIFDK
AGLFAPKIGAIMKKMPLPCIEFKIJK
DDLLLLLDDDLLLLLDLDDDDLDLDL
Read a number in the range 
0-100
Decrease
APCNCOHKFNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKEGFFLK
ADPCPJCJGIIJCMCFGNKCGDCJMK
AMFBJLBGMHPKNLCMONHKELMLKK
AAPHBAJJCGHNHIINJFKJPAOHFK
AHLFAKLBKGLKAAIKBKFEMMNJLK
DDLLLLLDDDLLLLLDDDDDDLDLDL
Product Reference Guide
Read a number in the range 
0-100
82
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
COLOR DEPTH – PRESET 1
2 Grey Levels*
16 Grey Levels*
APCNCOHODNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEDCFIK
AKCBPJCJGIIJCMCEGLLFECGHJK
AEFBJLBGMHPKNJEKPNMJGHNGGK
AAPHBAJJDFABOEMAFLAAIJDPDK
AHKFAJMLEAHCIHPPHIMCIFEILK
DDDLLLLDDDDLLLLDLDLDDLDLDL
APCNCOHODNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEFAGIK
AKCBPJCJGIIJCMCEHKIJONNJPK
AEFBJLBGMHPKNODOAILFMBGHGK
AAPHBAJJCGEGLNGPLGEMOBFNFK
AGKFAMNCIGEECNLKNNLOAMDJJK
DDDLLLLDDDDLLLLDDDLDDLDLDL
256 Grey Levels
APCNCOHODNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFAAEIK
AKCBPJCJGIIJCMCFGMMCGPCLLK
AEFBJLBGMHPLMOEKNKCNINPFGK
AAPHBAJIDCAOLIINOJFNAIKDBK
AFKFAPLBNPHEEAPCAKNOEJMJIK
DDDLLLLDDDDLLLLDLDLDDLDLDL
* only for TIFF Images.
Image Preset 2
Basic Configuration
IMAGE FORMAT – PRESET 2
JPEG Format
TIFF Format
APCNCKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEBEFIK
AKCBPJCJGIIJCMCFGILJBIOPNK
AEFBJLBGMHPLMKCGHAAHKHEHGK
AAPHBAJJDHECICEMMLNDPHNJDK
AGLFAOJBACJKKNDNJFMKKKPLJK
DDLLLLLDDDDLLLLDLDDDDLDLDL
APCNCKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFEEHIK
AKCBPJCJGIIJCMCEHOPCJKBNJK
AEFBJLBGMHPKNKFCKCJPOLNFGK
AAPHBAJICDAKIHKOJEMCBOCHHK
AFLFANPCFLKKMAHFECKKOPALIK
DDLLLLLDDDDLLLLDDDDDDLDLDL
JPEG QUALITY FACTOR – PRESET 2
JPEG Quality Factor
APCNBLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEEAFIK
AKCBPJCJGIIJCMCEHLPLLPFHLK
AEFBJLBGMHPLNMCAFNDPCLOFGK
AAPHBAJICDGFKABJCPJMJOGJDK
AHKFAKNLJPGAABJBBIFIGOKKKK
DDDLLLLDLDDLLLLDDLDDDLDLDL
83
Set the JPEG compression
level in the range 000-100.
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
Advanced Configuration
BRIGHTNESS – PRESET 2
Increase
Read a number in the range 
0-100
APCNCKHKHNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKFCDGLK
ADHCPJCJGIIJCMCEHILNFHGNKK
AIFBJLBGMHPKNOHJOGBHOHCLKK
AAPHBAJJDFDOKJNCLOLFMBANBK
AEKFAPMIPNNGAGHKOJJACOOJLK
DLLLLLLDLLLLLLLDLLLDDLDLLL
Decrease
Read a number in the range 
0-100
APCNCKHKHNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKFEBFLK
ADHCPJCJGIIJCMCEGJIBPINDMK
AIFBJLBGMHPKNJANBDGLEBJKKK
AAPHBAJJCGHJPAHNFDPJKJGPHK
AFKFAKNBDLOAKMDPEMOMKHJIJK
DLLLLLLDLLLLLLLDDLLDDLDLLL
CONTRAST – PRESET 2
Increase
APCNCKHKFNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKEBGELK
ADHCPJCJGIIJCMCEHMNMONEHOK
AMFBJLBGMHPLMLDFEPANINBKKK
AAPHBAJIDEFPKFJDBMNBBGPNBK
AFLFAKINMDFCMNHGKJGAKPLKLK
DDLLLLLDDDDLLLLDDLLDDLDLDL
Read a number in the range 
0-100
Decrease
APCNCKHKFNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKEHEHLK
ADHCPJCJGIIJCMCEGNOAECPJIK
AMFBJLBGMHPLMMEBLKHBCLKLKK
AAPHBAJICHBIPMDMPBJNHOJPHK
AELFAPJEAFGEGHDDAMBMCGMLJK
DDLLLLLDDDDLLLLDLLLDDLDLDL
Product Reference Guide
Read a number in the range 
0-100
84
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
COLOR DEPTH – PRESET 2
2 Grey Levels*
16 Grey Levels*
APCNCKHODNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEBEHIK
AKCBPJCJGIIJCMCFGMNCDMIFLK
AEFBJLBGMHPKNJDNFMKBBBHHGK
AAPHBAJIDAHLOLLDCNAPGBJFDK
AGLFANOADDOICLGBMGIGCGBJIK
DDLLLLLDLDLLLLLDDLLDDLDLLL
APCNCKHODNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALEHGEIK
AKCBPJCJGIIJCMCFHNOOJDDLNK
AEFBJLBGMHPKNOEJKJNNLHMGGK
AAPHBAJICDDMLCBMMAEDAJPHFK
AHLFAIPJPFNOIBCEGDPKKPGIKK
DDLLLLLDLDLLLLLDLLLDDLDLLL
256 Grey Levels
APCNCKHODNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKFCGGIK
AKCBPJCJGIIJCMCEGLKFBBMJJK
AEFBJLBGMHPLMODNHLEFPLFEGK
AAPHBAJJDHHELHPOJPFCOAAJBK
AELFALJKKMOOOMGMLEJKOKJILK
DDLLLLLDLDLLLLLDDLLDDLDLLL
* only for TIFF Images.
85
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
Image Preset 3
Basic Configuration
IMAGE FORMAT – PRESET 3
JPEG Format
TIFF Format
APCJGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFAAEIK
AKCBPJCJGIIJCMCEGOLKODPNNK
AEFBJLBGMHPKNNCEJMGFHFIHGK
AAPHBAJJDHAGHPOFCBFFABMJHK
AELFAILDLOIMIJHEKLHMICFJJK
DDLLLLLDDDLLLLLDLDDDDLDLLL
APCJGOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEFAGIK
AKCBPJCJGIIJCMCFHIPBGBAPJK
AEFBJLBGMHPLMNFAEOPNDJBFGK
AAPHBAJICDEOHKAHHOEEOIDHDK
AHLFALNAOHLMOEDMHMBMMHKJIK
DDLLLLLDDDLLLLLDDDDDDLDLLL
JPEG QUALITY FACTOR – PRESET 3
JPEG Quality Factor
APCJFPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFFEEIK
AKCBPJCJGIIJCMCFHNPIEEEFLK
AEFBJLBGMHPKMLCCLBFNPJCFGK
AAPHBAJICDCBFNLAMFBKGIHJHK
AFKFAMPJCDHGCFNICGOOEGAIKK
DDDLLLLDLDLLLLLDDLDDDLDLLL
Product Reference Guide
Set the JPEG compression
level in the range 000-100.
86
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
Advanced Configuration
BRIGHTNESS – PRESET 3
Increase
Read a number in the range 
0-100
APCJGOHKHNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKFACELK
ALPCPJCJGIIJCMCEHNNMGGBPEK
AIFBJLBGMHPKMKFILFKKCKIIKK
AAPHBAJIDACGDMGODKDKODCLBK
AGLFAKOKDCBAOMIKGIMGKDBJKK
DDLLLLLDDLDLLLLDLLLDDLDLLL
Decrease
Read a number in the range 
0-100
APCJGOHKHNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKFGAHLK
ALPCPJCJGIIJCMCEGMOAMJKBCK
AIFBJLBGMHPKMNCMEANGIMDJKK
AAPHBAJICDGBGFMBNHHGILEJHK
AHLFAPPDPECGEGMPMNLKCKGIIK
DDLLLLLDDLDLLLLDDLLDDLDLLL
CONTRAST – PRESET 3
Increase
APCJGOHKFNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKEDHGLK
ALPCPJCJGIIJCMCEHJLNNMDFAK
AMFBJLBGMHPLNPBEBMLAEALJKK
AAPHBAJJDBEHDACPJIFODENLBK
AHKFAPKPAMJECHIGCIDGCCEKKK
DLLLLLLDLDLLLLLDDLLDDLDLDL
Read a number in the range 
0-100
Decrease
APCJGOHKFNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKEFFFLK
ALPCPJCJGIIJCMCEGIIBHDILGK
AMFBJLBGMHPLNIGAOJMMOGAIKK
AAPHBAJJCCAAGJIAHFBCFMLJHK
AGKFAKLGMKKCINMDINEKKLDLIK
DLLLLLLDLDLLLLLDLLLDDLDLDL
87
Read a number in the range 
0-100
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
COLOR DEPTH – PRESET 3
2 Grey Levels*
16 Grey Levels*
APCJGOHODNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFAAGIK
AKCBPJCJGIIJCMCEGKNBMHJHLK
AEFBJLBGMHPLMODPLAMDMDLHGK
AAPHBAJIDADPBGBKMHIJJHIFHK
AELFALMCIPPOAPCIPIDAAOLLIK
DDLLLLLDLDDLLLLDDLLDDLDLDL
APCJGOHODNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFGCFIK
AKCBPJCJGIIJCMCEHLONGICJNK
AEFBJLBGMHPLMJELEFLPGFAGGK
AAPHBAJICDHIEPLFCKMFPPOHBK
AFLFAONLEJMIKFGNFNEMIHMKKK
DDLLLLLDLDDLLLLDLLLDDLDLDL
256 Grey Levels
APCJGOHODNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEDCHIK
AKCBPJCJGIIJCMCFGNKGOKNLJK
AEFBJLBGMHPKNJDPJHCHCJJEGK
AAPHBAJJDHDAEKFHHFNEBGBJFK
AGLFANLIBAPIMICFIKCMMCDKLK
DDLLLLLDLDDLLLLDDLLDDLDLDL
* only for TIFF Images.
Image Preset 4
Basic Configuration
IMAGE FORMAT – PRESET 4
Product Reference Guide
JPEG Format
TIFF Format
APCJGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFCGGIK
AKCBPJCJGIIJCMCFGJNNJNBPPK
AEFBJLBGMHPKNNFDDNANADCGGK
AAPHBAJIDCHMHAJGFHFKOJGDHK
AFKFAMJIMNBGCFOKBFDICBAIKK
DDDLLLLDLDDLLLLDDLDDDLDLDL
APCJGKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEHGEIK
AKCBPJCJGIIJCMCEHPJGBPONLK
AEFBJLBGMHPLMNCHOPJFEPLEGK
AAPHBAJJCGDEHFHEAIELAAJNDK
AGKFAPPLJECGEIKCMCFIGEPILK
DDDLLLLDLDDLLLLDLLDDDLDLDL
88
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
JPEG QUALITY FACTOR – PRESET 4
JPEG Quality Factor
APCJFLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFHCGIK
AKCBPJCJGIIJCMCEHKJPDKKHJK
AEFBJLBGMHPKMLFFBADFIPIEGK
AAPHBAJJCGFLFCMDLDBFIANDHK
AELFAINCFAOMIJEGJIKKOFFJJK
DDLLLLLDDDDLLLLDLDDDDLDLDL
Set the JPEG compression
level in the range 000-100.
Advanced Configuration
BRIGHTNESS – PRESET 4
Increase
APCJGKHKHNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKFBDGLK
ALHCPJCJGIIJCMCFHNJOEHMPAK
AIFBJLBGMHPLNNDFOCKBEKOIKK
AAPHBAJJDBEDLINPFOAOGNFDDK
AFLFAPMPJBMOILDDHOIOEJALIK
DDLLLLLDDLLLLLLDDDDDDLDLLL
Read a number in the range 
0-100
Decrease
APCJGKHKHNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKFHBFLK
ALHCPJCJGIIJCMCFGMKCOIHBGK
AIFBJLBGMHPLNKEBBHNNOMFJKK
AAPHBAJJCCAEOBHALDECAFDBFK
AELFAKNGFHPICBHGNLPCMAHKKK
DDLLLLLDDLLLLLLDLDDDDLDLLL
89
Read a number in the range 
0-100
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
CONTRAST – PRESET 4
Increase
APCJGKHKFNGNENEIEPANHOGOCK
AFPFKJAMDKEOFMHMLJAKECGELK
ALHCPJCJGIIJCMCFHJPPPNOFEK
AMFBJLBGMHPKMIHJELLLCANJKK
AAPHBAJIDACCLEJOPMGKLKKDDK
AEKFAKIKKPEKEADPDOHOMIFIIK
DLLLLLLDLDDLLLLDLDDDDLDLDL
Read a number in the range 
0-100
Decrease
APCJGKHKFNGNENEIEPANHOGOCK
AFPFKBIMDKEOFMHMLJAKEEEHLK
ALHCPJCJGIIJCMCFGIMDFCFLCK
AMFBJLBGMHPKMPANLOMHIGGIKK
AAPHBAJICDGFONDBBBCGNCMBFK
AFKFAPJDGJHMOKHKJLACEBCJKK
DLLLLLLDLDDLLLLDDDDDDLDLDL
Read a number in the range 
0-100
COLOR DEPTH – PRESET 4
2 Grey Levels*
16 Grey Levels*
APCJGKHODNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCFGNLGLJHFJK
AEFBJLBGMHPLMOEIBBKLLFBGGK
AAPHBAJJDFEFBJGJLBIGHPCPHK
AFKFAPOJPMGEKDLGEGHEKNOKLK
DDDLLLLDDDLLLLLDLDLDDLDLLL
APCJGKHODNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFEEHIK
AKCBPJCJGIIJCMCFHMIKBGMLPK
AEFBJLBGMHPLMJDMOENHBDKHGK
AAPHBAJJCGACEAMGFMMKBHENBK
AEKFAKPADKFCAJPDODAICEJLJK
DDDLLLLDDDLLLLLDDDLDDLDLLL
256 Grey Levels
APCJGKHODNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEBEFIK
AKCBPJCJGIIJCMCEGKMBJEDJLK
AEFBJLBGMHPKNJEIDGEPFPDFGK
AAPHBAJIDCEKEFCEADNLPOLDFK
AHKFAJJDGDGCGELLDEGIGBGLIK
DDDLLLLDDDLLLLLDLDLDDLDLLL
* only for TIFF Images.
Product Reference Guide
90
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
Advanced Data Format
Advanced data format has been designed to offer you complete flexibility in changing the
format of barcode data before transmitting it to the host system.
Up to 5 advanced code management formats can be defined by completing the four given
procedures following the desired order:
• Format Definition
• Mismatch Result
• Enable/Disable Format
• Match Conditions
The formats defined will be restored to default values when reading the general "Restore
Default" code given in "Configuration Editing Commands" on page 114.
Read the Enter Configuration
Command
AMHKHPEMDNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKECFEIK
AKCBPJCJGIIJCMCEGLLJGOFLPK
AEFBJLBGMHPLMOFLCOIFHHOHGK
AAPHBAJJDGFPAKHBBIFEKNCFFK
AEKFBMPJNBJIONFLOAAKACLIIK
DLLDLDLLDLLLLLLDDLLDDLDLLL
Define Format
1, 2, 3, 4, or 5 (par. 2.14.1)
Choose the method and define
the format
Method 1
Extract information from
barcode (page 89)
Method 2
Manipulate barcode data
(page 94)
YES
Define another?
Enable or Disable the Format
(see par. 2.14.3)
Define Mismatch Result
(see par. 2.14.4)
Define one or more Match
Conditions (par. 2.14.2)
Read the Exit and save
Configuration Command
91
AMHKDPEMDNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKEEDEIK
AKCBPJCJGIIJCMCEGOMAJIABNK
AEFBJLBGMHPLNJGPCKBKKODEGK
AAPHBAJJCCHOPLEOMLKLDFOFHK
AHKFBNMCPOFKAHHMBGEAIHGKIK
DDDDLDLLLDDLLLLDDLDDDLDLDL
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
Format Definition
STEP 1. FORMAT DEFINITION
Define Format 1
Define Format 2
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEAFGIK
AKCBPJCJGIIJCMCFGLIBLHNBJK
AEFBJLBGMHPLNODFHCIGIAPGGK
AAPHBAJJCEANJLPCFANLOLDLDK
AGLFAONBHJFAIFILILDKIIAKJK
DDLLLDLDLLLLLLLDDDDDDLDLDL
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALFFFEIK
AKCBPJCJGIIJCMCEHNMKDFCDNK
AEFBJLBGMHPKMOEBKABOMMGEGK
AAPHBAJIDAEFJOBAAPMKACMFHK
AFLFANLCCAGAOIMDFMFKMNPKIK
DDLLLDLDLLLLLLLDLDDDDLDLDL
Define Format 3
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKFBCFIK
AKCBPJCJGIIJCMCEGIILFOFHLK
AEFBJLBGMHPLNKHIDJEMFICFGK
AAPHBAJIDAHLABGEHHFOHDBFHK
AGKFAMMMBIDCEBNPMOPCMPJIJK
DDDLLDLDLLLLLLLDLDLDDLDLLL
Product Reference Guide
Define Format 4
Define Format 5
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJALEECHIK
AKCBPJCJGIIJCMCFHOMANMKFPK
AEFBJLBGMHPKMKAMOLNEBELHGK
AAPHBAJJCEDDAEIGCIEPJKOLDK
AFKFAPKPEBACCMJHBJJCIKGIIK
DDDLLDLDLLLLLLLDDDLDDLDLLL
AOCLGKHMFNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJALECAEIK
AKCBPJCJGIIJCMCFGPPMHDBLJK
AEFBJLBGMHPKMNHIBOKILCAGGK
AAPHBAJJDHHEFNCJMFADPCIJFK
AEKFAKLGIHDEIGNCLMOOADBJKK
DDDLLDLDLLLLLLLDLDLDDLDLLL
92
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
STEP 2. FORMAT DEFINITION
Method 1 - Extracting Information from Barcode
Method 1 allows extracting one or more fields by position or by characters from the decoded
barcode. These fields are sent to the host computer as data of the output message, while the
characters not included in the formatting procedure will be deleted and not inserted in the
output message.
These two kinds of extraction (by position / by character) can be used together within the same
format definition; furthermore, it possible to complete the new format by adding a new string of
characters. Since there is no fixed rule, the procedures can be freely put in order and repeated
according to your requirement.
The only limit is determined by the size of the internal reserved memory used to define the
format.
B e g in F o rm a t
D e f in it io n 1 , 2 , 3 , 4 ,
or 5
Add
Add
E x t r a c t io n b y
P o s i t io n
Add new
s tr in g
E x t r a c t io n b y
C h a ra c te rs
Add
Add
Add
93
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
Example Method 1 Extracting Information from Barcode
Decoded code: <DATALOGICproduct>
Formatting procedure: Add new string + Extract field by position + Add new string + Extract
field by character + Add new string
Add New String
String
character(s)
End String
Add
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+ 32 + 31 +
+
+
Field Extraction by Position
Field Starting Position
Field Ending Position
End Selection
Add
AOBLHMFKFNGNENEIEPANHOGOCK
AHJLJDHODKEOFMHMLJAKFAAEKK
AOJDPBCJGIIJCMCFHLLMNMLLCK
AIFBJLBGMHPKNODINAHHKIIIOK
AAPHBAJJCEENANJPDPICKJMNDK
AELFAOIHAAIMAJHDEOOCAELIJK
DDLLDLLDLDLLLLLDLLLDDLDLDL
AMHMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFAEHIK
AKCBPJCJGIIJCMCEGJNNFJBHPK
AEFBJLBGMHPKMODHFLJEFONGGK
AAPHBAJJDDGMOPACEHFBIKCHDK
AHLEBJJEGHHCCJIDKKMMCPEILK
DDLLLLDDLDLLLLLDDDLDDLDLDL
AMEMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCFHPIGEADPNK
AEFBJLBGMHPLNPAAJOFOEGDHGK
AAPHBAJJDDFCKPDOMCFJCJOLFK
AFKEBNKLKLEGOPOFPGLMEPLIJK
DLLLLLDDLDDLLLLDDLLDDLDLLL
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+1+
+3+
+
+
Add New String
String
character(s)
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
+ 32 + 31 +
End String
Add
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+
+
Field Extraction by Character
Field Starting
Characters
Field Ending
Character
End Selection Including
Starting and Ending Characters
Add
AOBLHMFKFNGNENEIEPANHOGOCK
AHJLJDHODKEOFMHMLJAKFAAEKK
AOJDPBCJGIIJCMCFHLLMNMLLCK
AIFBJLBGMHPKNODINAHHKIIIOK
AAPHBAJJCEENANJPDPICKJMNDK
AELFAOIHAAIMAJHDEOOCAELIJK
DDLLDLLDLDLLLLLDLLLDDLDLDL
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
ANGKGKCKFNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEDCEIK
AKCBPJCJGIIJCMCFGNKOLDHPNK
AEFBJLBGMHPKNNBLBIKDNOPEGK
AAPHBAJICGHGMLMOIAGMOMCHFK
AELFBKMIOONGGOJPDEMGAAGJKK
DLLDLDLLDLDLLLLDLDDDDLDLDL
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+ 4F + 47 +
+ 72 +
+
+
Add New String
String
character(s)
End String
End Format
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
+ 32 + 31 +
+
Output message: <21DAT21OGICpr21>
Product Reference Guide
94
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
FIELD EXTRACTION BY CHARACTER
a)
Define Field Starting Character(s)
Field Starting Character(s)
AOCKHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJALEDGHKK
AOJDPBCJGIIJCMCEGNOJDNBPEK
AIFBJLBGMHPLNIDFFINJEEAJOK
AAPHBAJICCGOBPPLKMDJODJLBK
AHLFALLKHHHKCDLGLEPOABEKIK
DLDLDLLDLDDLLLLDDDLDDLDLLL
b)
Read the Hex value from the Hex/Numeric table
identifying the starting character(s) of the field to
be extracted. Valid values are in the range 00-7F.
Define Field Ending Character(s)
Field Ending Character(s)
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
c)
Read the Hex value from the Hex/Numeric table
identifying the ending character(s) of the field to
be extracted. Valid values are in the range 00-7F.
Field Delimiter Selection
Discard Start/End
Characters
Include Start/End
Characters
ANGKGKCKFNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEDCEIK
AKCBPJCJGIIJCMCFGNKOLDHPNK
AEFBJLBGMHPKNNBLBIKDNOPEGK
AAPHBAJICGHGMLMOIAGMOMCHFK
AELFBKMIOONGGOJPDEMGAAGJKK
DLLDLDLLDLDLLLLDLDDDDLDLDL
d)
EITHER
ANGKGKAKHNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEGHGIK
AKCBPJCJGIIJCMCFGLMLMKGDJK
AEFBJLBGMHPKMLGFPEPOPDMEGK
AAPHBAJJDFDNAIMLIINFBCODDK
AHKFBIKGJAGEKLGKEKMEIMAIKK
DDLDLDLLLLDLLLLDLLLDDLDLDL
OR
Add Field or String
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
•
•
•
OR
To add other fields selected by characters
read the code and repeat this procedure
from step a for each field to be selected;
To add a new string of characters read the
code and follow the procedure described on
page 97;
To add the procedure selecting new fields
by position read the code and follow the
description given on page 96.
End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
95
Read the code to end the format definition.
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
FIELD EXTRACTION BY POSITION
a)
Define Field Starting Position
Field Starting Position
AOBLHMFKFNGNENEIEPANHOGOCK
AHJLJDHODKEOFMHMLJAKFAAEKK
AOJDPBCJGIIJCMCFHLLMNMLLCK
AIFBJLBGMHPKNODINAHHKIIIOK
AAPHBAJJCEENANJPDPICKJMNDK
AELFAOIHAAIMAJHDEOOCAELIJK
DDLLDLLDLDLLLLLDLLLDDLDLDL
b)
Read a number corresponding to the field
starting position.
Define Field Ending Position
Field Ending Position
AMHMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFAEHIK
AKCBPJCJGIIJCMCEGJNNFJBHPK
AEFBJLBGMHPKMODHFLJEFONGGK
AAPHBAJJDDGMOPACEHFBIKCHDK
AHLEBJJEGHHCCJIDKKMMCPEILK
DDLLLLDDLDLLLLLDDDLDDLDLDL
Last Position
AODIHMFKFNGNENEIEPANHOGOCK
AHJLJDHODKEOFMHMLJAKECEFKK
AOJDDBCJGIIJCMCFGJOBMJMDAK
AIFBJLBGMHPKNPHCPMPIMIMIOK
AAPHBAJJDFBPALCKEKLEJMBHFK
AELFAMLGJAMMMEIECNBGEMEIIK
DLDLDLLDDLDLLLLDLDLDDLDLDL
OR
Read a number corresponding to the
field ending position.
c)
Read this code to set the
field ending position to the
last position of the code:
End Field Selection
End Selection
AMEMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCFHPIGEADPNK
AEFBJLBGMHPLNPAAJOFOEGDHGK
AAPHBAJJDDFCKPDOMCFJCJOLFK
AFKEBNKLKLEGOPOFPGLMEPLIJK
DLLLLLDDLDDLLLLDDLLDDLDLLL
d)
EITHER
Read the code to end the field selection.
Add Field or String
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
•
•
•
OR
To add other fields selected by position
read the code and repeat this procedure
from step a for each field to be selected;
To add a new string of characters read the
code and follow the procedure described on
page 97;
To add the procedure selecting new fields
by characters read the code and follow the
description given on page 97.
End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Product Reference Guide
Read the code to end the format definition.
96
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
ADD NEW STRING
a)
Define New String
String Character(s)
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
b)
Read the Hex value from the Hex/Numeric table
identifying the character(s). Valid values are in
the range 00-7F.
End String
End String
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
c)
EITHER
Read the code to end the string defined in step a.
Add Procedure
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
•
•
OR
To add the procedure extracting fields by
characters follow the steps given on page
97;
To add the procedure extracting fields by
position follow the steps given on page 96;
End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
97
Read the code to end the format definition.
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
Method 2 - Manipulating the Barcode Data
Method 2 allows modifying the barcode data by means of one of the following procedures:
• String insertion;
• String deletion;
• String substitution;
• Field deletion.
Once the data has been modified, it is sent to the host computer as data of the output message.
Unlike Method 1 this method does not allow associating different procedures together. This
means that each format definition corresponds to a single procedure. Despite this, it possible to
add a new string of characters to the beginning or ending part of the formatted barcode.
The only limit is determined by the size of the internal reserved memory used to define the
format.
Product Reference Guide
98
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
STRING INSERTION
To complete this procedure proceed as follows:
Define Form at
1, 2, 3, 4, or 5
YES
Add String?
Add new
String
NO
Insert String
Ad d new
String
YES
Add
Add String?
Add
NO
End Form at Definition
Example
Decoded code: <DATALOGICproduct>
Formatting procedure: Add new string + Insert String
Add New String
String
character(s)
End String
Add
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+ 31 + 37 +
+
+
String Insertion Procedure
Insert String
String Position
End Selection
End Format
APCJHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJAKFBEFKK
AOJDPBCJGIIJCMCFGNNKPHPHEK
AIFBJLBGMHPKMNFKECEKLIIKOK
AAPHBAJJCHGNHBHGFNLIIFKNBK
AGLFAPNMBCJCECKOAHGMMHGJIK
DLLLDLLDLDDLLLLDDLLDDLDLLL
ANGKGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFFFHIK
AKCBPJCJGIIJCMCEHMIMGAPNPK
AEFBJLBGMHPKMMEAMOFNIIJHGK
AAPHBAJJCDCACHFDPDKEMILFDK
AGLFBOPJJHMAKGJOKEFMCECLIK
DLDDLDDLLLLLLLLDDDLDDLDLLL
AMEMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCFHPIGEADPNK
AEFBJLBGMHPLNPAAJOFOEGDHGK
AAPHBAJJDDFCKPDOMCFJCJOLFK
AFKEBNKLKLEGOPOFPGLMEPLIJK
DLLLLLDDLDDLLLLDDLLDDLDLLL
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
+ + 31 + 32 + 33 +
+5
+
Output message: <17DATA123LOGICproduct>
99
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
String Insertion Procedure
a)
Insert String
Insert String
APCJHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJAKFBEFKK
AOJDPBCJGIIJCMCFGNNKPHPHEK
AIFBJLBGMHPKMNFKECEKLIIKOK
AAPHBAJJCHGNHBHGFNLIIFKNBK
AGLFAPNMBCJCECKOAHGMMHGJIK
DLLLDLLDLDDLLLLDDLLDDLDLLL
b)
Read the Hex value from the Hex/Numeric table identifying the characters to be inserted. Valid values are in the range 00-7F.
Define String Position
String Position
ANGKGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFFFHIK
AKCBPJCJGIIJCMCEHMIMGAPNPK
AEFBJLBGMHPKMMEAMOFNIIJHGK
AAPHBAJJCDCACHFDPDKEMILFDK
AGLFBOPJJHMAKGJOKEFMCECLIK
DLDDLDDLLLLLLLLDDDLDDLDLLL
c)
Read a number corresponding to the string position within the barcode.
End Selection
End Selection
AMEMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFFGGIK
AKCBPJCJGIIJCMCFHPIGEADPNK
AEFBJLBGMHPLNPAAJOFOEGDHGK
AAPHBAJJDDFCKPDOMCFJCJOLFK
AFKEBNKLKLEGOPOFPGLMEPLIJK
DLLLLLDDLDDLLLLDDLLDDLDLLL
d)
EITHER
Read the code to end the field selection.
Add String
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
OR
To add a new string of characters read the code and follow the procedure described on page 108
End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Product Reference Guide
Read the code to end the format definition.
100
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
STRING DELETION
To complete this procedure proceed as follows:
Define Format
1, 2, 3, 4, or 5
Add String?
YES
Add new
String
NO
Delete String
Add
Delete
Add new
String
YES
Add String?
Add
NO
End Format Definition
Example
Decoded code: <DATALOGICproduct>
Formatting procedure: Delete First String + Delete Second String + Add New String.
String Deletion Procedure
Delete String
Loop
End Selection
Add
AMHLGLEKHNGNENEIEPANHOGOCK
AHLNEBIMDKEOFMHMLJAKEDDEJK
AKCBPJCJGIIJCMCEHKMCKLPJPK
AEFBJLBGMHPLMMEILNAAMKFHGK
AAPHBAJIDFHJHFNFIEAPKCANBK
AFKFAIMEHLPACFEFIKDEGEPKLK
DLDLLLLDDLLLLLLDDDLDDLDLDL
ANGKBPDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEBAFIK
AKCBPJCJGIIJCMCFGMOOCHKHPK
AEFBJLBGMHPKNOAOGNPALEBGGK
AAPHBAJJDHEGKODPGMNFGEBBDK
AHKFBMOKBMDCKNFKANNGAHJLLK
DLLDLDLLLLDLLLLDDDDDDLDLLL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
+ 4C +4F +
+ 6F +64 +
+
+
Add New String
String
Character(s)
End String
End Format
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
+ 33 + 31 +
+
Output message: <DATAGICpruct31>
101
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
String Deletion Procedure
a)
Delete String
Delete
AMHLGLEKHNGNENEIEPANHOGOCK
AHLNEBIMDKEOFMHMLJAKEDDEJK
AKCBPJCJGIIJCMCEHKMCKLPJPK
AEFBJLBGMHPLMMEILNAAMKFHGK
AAPHBAJIDFHJHFNFIEAPKCANBK
AFKFAIMEHLPACFEFIKDEGEPKLK
DLDLLLLDDLLLLLLDDDLDDLDLDL
b)
(optional)
Read the Hex value from the Hex/Numeric table
identifying the string character(s) to be deleted.
Valid values are in the range 00-7F.
Select Other Strings to be Deleted
Loop
ANGKBPDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEBAFIK
AKCBPJCJGIIJCMCFGMOOCHKHPK
AEFBJLBGMHPKNOAOGNPALEBGGK
AAPHBAJJDHEGKODPGMNFGEBBDK
AHKFBMOKBMDCKNFKANNGAHJLLK
DLLDLDLLLLDLLLLDDDDDDLDLLL
c)
Read the code above and repeat the procedure
from step a.
End Selection
End Selection
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
d)
EITHER
Read the code to end the selection.
Add String
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
OR
To add a new string of characters read the code
and follow the procedure described on page 108
End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Product Reference Guide
Read the code to end the format definition.
102
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
STRING SUBSTITUTION
To complete this procedure proceed as follows:
Define Form at
1, 2, 3, 4, or 5
YES
Add String?
Add new
String
NO
Substitute String
Add new
String
YES
Add
Add String?
Add
NO
End Form at Definition
Example
Decoded code: <DATALOGICproduct>
Formatting procedure: Add new string + String substitution + Add new string.
String Substitution
Procedure
Add New String
103
String Character(s)
End String
Add
Substitute
String
Substituting
String
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
APAKHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJAKEDHGKK
AOJDPBCJGIIJCMCEGOLKBIGLCK
AIFBJLBGMHPLNKFOPDLBPKNKOK
AAPHBAJICGBMGPOCHHEBNAMFHK
AHLFAKKFLHGOGEAFKMLMANFIKK
DDLLDLLDLLDLLLLDLDLDDLDLLL
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
+ 34 + 33 +
+
+
+ 41 +
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
String Substitution
Procedure
+ 37
End Selection
ANGKCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFDGGIK
AKCBPJCJGIIJCMCEHIIJCDNNLK
AEFBJLBGMHPLMJHPNALEBLNEGK
AAPHBAJJDECDIMLOHFEABEPBDK
AHLFBJKMHHIKGLHMLAGMAEELLK
DLLDDDDLLLDLLLLDDLLDDLDLDL
+
Add New String
Add
String
Character(s)
End String
End Format
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
+
+ 34 + 33 +
+
Output message: <43D7T7LOGICproduct43>
String Substitution Procedure
a)
Define String to be Substituted
Substitute String
APAKHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJAKEDHGKK
AOJDPBCJGIIJCMCEGOLKBIGLCK
AIFBJLBGMHPLNKFOPDLBPKNKOK
AAPHBAJICGBMGPOCHHEBNAMFHK
AHLFAKKFLHGOGEAFKMLMANFIKK
DDLLDLLDLLDLLLLDLDLDDLDLLL
b)
Read the Hex value from the Hex/Numeric table
identifying the characters of the string to be
substituted. Valid values are in the range 00-7F.
Define Substituting String
Substituting String
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
c)
Read the Hex value from the Hex/Numeric table
identifying the characters of the substituting
string. Valid values are in the range 00-7F.
End Selection
End Selection
ANGKCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFDGGIK
AKCBPJCJGIIJCMCEHIIJCDNNLK
AEFBJLBGMHPLMJHPNALEBLNEGK
AAPHBAJJDECDIMLOHFEABEPBDK
AHLFBJKMHHIKGLHMLAGMAEELLK
DLLDDDDLLLDLLLLDDLLDDLDLDL
Product Reference Guide
Read the code to end the selection.
104
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
d)
ADVANCED IMAGE CAPTURE
EITHER
Add String
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
To add a new string of characters read the code and follow the procedure described on page 108.
OR
End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Read the code to end the format definition.
FIELD DELETION
To complete this procedure proceed as follows:
Define Form at
1, 2, 3, 4, or 5
Add String?
YES
Add new
String
NO
Delete Field
Add
Delete
Ad d new
String
YES
Add String?
Add
NO
E nd Form at Definition
Example
Decoded code: <DATALOGICproduct>
Formatting procedure: Delete First Field + Delete Second Field + Add New String.
105
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
Field Deletion Procedure
Delete
1st Field Starting
Character
1st Field Ending
Character
AMHLGLEKHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJALEAHEIK
AKCBPJCJGIIJCMCEHILFPJABJK
AEFBJLBGMHPKNIFAMGIDOBPFGK
AAPHBAJIDBDPFCPCBLBBIHELFK
AGLFAMKAJEOIKHFKIGKEMGNILK
DDLLLLLDLLLLLLLDDLDDDLDLLL
AOCKHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJALEDGHKK
AOJDPBCJGIIJCMCEGNOJDNBPEK
AIFBJLBGMHPLNIDFFINJEEAJOK
AAPHBAJICCGOBPPLKMDJODJLBK
AHLFALLKHHHKCDLGLEPOABEKIK
DLDLDLLDLDDLLLLDDDLDDLDLLL
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
+
+ 41 +
+ 4C + 4F +
Field Deletion Procedure
+
End Selection
Loop
2nd Field Starting
Character
2nd Field Ending
Character
ANGKGKCKFNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEDCEIK
AKCBPJCJGIIJCMCFGNKOLDHPNK
AEFBJLBGMHPKNNBLBIKDNOPEGK
AAPHBAJICGHGMLMOIAGMOMCHFK
AELFBKMIOONGGOJPDEMGAAGJKK
DLLDLDLLDLDLLLLDLDDDDLDLDL
AMGNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEABEIK
AKCBPJCJGIIJCMCFHJINBKHDLK
AEFBJLBGMHPKNMAOENDIPHLFGK
AAPHBAJIDBCEANCBBFLCKCCPBK
AGLEBJMGIGHAKOKOCOEIAEIKIK
DDLLLLDDDLDLLLLDLLDDDLDLDL
AOCKHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJALEDGHKK
AOJDPBCJGIIJCMCEGNOJDNBPEK
AIFBJLBGMHPLNIDFFINJEEAJOK
AAPHBAJICCGOBPPLKMDJODJLBK
AHLFALLKHHHKCDLGLEPOABEKIK
DLDLDLLDLDDLLLLDDDLDDLDLLL
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
+
+
Field Deletion Procedure
+ 75 +
+ 70 + 72 +
Add New String
End Selection
Add
String Character(s)
End String
End Format
ANGKGKCKFNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEDCEIK
AKCBPJCJGIIJCMCFGNKOLDHPNK
AEFBJLBGMHPKNNBLBIKDNOPEGK
AAPHBAJICGHGMLMOIAGMOMCHFK
AELFBKMIOONGGOJPDEMGAAGJKK
DLLDLDLLDLDLLLLDLDDDDLDLDL
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
+
+
+
+ 35 + 31 +
+
Output message: <DGICct51>
Field Deletion Procedure
a)
Delete Field
Delete
AMHLGLEKHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJALEAHEIK
AKCBPJCJGIIJCMCEHILFPJABJK
AEFBJLBGMHPKNIFAMGIDOBPFGK
AAPHBAJIDBDPFCPCBLBBIHELFK
AGLFAMKAJEOIKHFKIGKEMGNILK
DDLLLLLDLLLLLLLDDLDDDLDLLL
Product Reference Guide
Read the code to enable the command deleting the field.
106
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
b)
Define Field Starting Character
Field Starting Character
AOCKHMFKFNGNENEIEPANHOGOCK
AHJLJFGOPKEOFMHMLJALEDGHKK
AOJDPBCJGIIJCMCEGNOJDNBPEK
AIFBJLBGMHPLNIDFFINJEEAJOK
AAPHBAJICCGOBPPLKMDJODJLBK
AHLFALLKHHHKCDLGLEPOABEKIK
DLDLDLLDLDDLLLLDDDLDDLDLLL
c)
Read the Hex value from the Hex/Numeric table
identifying the starting characters. Valid values
are in the range 00-7F.
Define Field Ending Character
Field Ending Character
ANGKFLDMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFAHIK
AKCBPJCJGIIJCMCEGOPAKPBPPK
AEFBJLBGMHPKMJENMIAHBLGEGK
AAPHBAJICGBNFAHDMJCFBEHLBK
AFLFBJPKEAGKOLODEFNICBBIIK
DDLDLDLLLDDLLLLDLLLDDLDLLL
d)
Read the Hex value from the Hex/Numeric table
identifying the ending character/s. Valid values
are in the range 00-7F.
End Field Selection
End Selection
ANGKGKCKFNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJALEDCEIK
AKCBPJCJGIIJCMCFGNKOLDHPNK
AEFBJLBGMHPKNNBLBIKDNOPEGK
AAPHBAJICGHGMLMOIAGMOMCHFK
AELFBKMIOONGGOJPDEMGAAGJKK
DLLDLDLLDLDLLLLDLDDDDLDLDL
e)
(optional)
Read the code to end the field selection.
Select Other Fields to be Deleted
Loop
AMGNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEABEIK
AKCBPJCJGIIJCMCFHJINBKHDLK
AEFBJLBGMHPKNMAOENDIPHLFGK
AAPHBAJIDBCEANCBBFLCKCCPBK
AGLEBJMGIGHAKOKOCOEIAEIKIK
DDLLLLDDDLDLLLLDLLDDDLDLDL
f)
EITHER
Read the following code and repeat the
procedure from step b for each field to be
deleted.
Add String
Add
AMHNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCGEIK
AKCBPJCJGIIJCMCEHKODEMDDPK
AEFBJLBGMHPKMOBCLFFFACLGGK
AAPHBAJIDBGAJHMKPCBLOPFBFK
AHKEBMPDMCJKIFABFMGICEEIJK
DLDLLLDDDLLLLLLDLLLDDLDLDL
107
To add a new string of characters read the code
and follow the procedure described on page 108
;
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
OR
End Format Definition
End Format Definition
AOHPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFDHEIK
AKCBPJCJGIIJCMCEGPJNABHNLK
AEFBJLBGMHPKMIGKBFNOFMEFGK
AAPHBAJICFEHIEFPPFNJMMKPFK
AHLEBNMNMLNOANPMNCFACGOLIK
DDLLLLDDLLLLLLLDLLLDDLDLDL
Read the code to end the format definition.
ADD NEW STRING
a)
Define New String
String Character
ANGOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDGIK
AKCBPJCJGIIJCMCEHJLONAJLLK
AEFBJLBGMHPLMJGBFHKLALDGGK
AAPHBAJJDECHGDKMOEDDMEBJBK
AHLEBNKAODJIMPLGJNNKMCKJIK
DDDLLLDDDLDLLLLDLDDDDLDLDL
b)
Read the Hex value from the Hex/Numeric table
identifying the starting characters. Valid values
are in the range 00-7F.
End String and Define Procedure
End String Plus Procedure
ANGKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFHDFIK
AKCBPJCJGIIJCMCFHLOLBOBPNK
AEFBJLBGMHPKMMDHGPDFPODGGK
AAPHBAJICGFKCICAIFKLCABPDK
AHKFBKNCOEFKAKAABKBIIHHKLK
DLLDLDDLDLDLLLLDLLLDDLDLDL
OR
Read the code to end the string selection and
continue defining a new procedure belonging to
Method 1.
End String and Format
End String & Format
ANGKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFFBEIK
AKCBPJCJGIIJCMCFGOPKHDHBLK
AEFBJLBGMHPLNIFDFNHOMPFHGK
AAPHBAJJDFAOLDEBEDPLAFIDBK
AGLFBMNPAAFGGKBFFMECGOAIJK
DLLLLLDLLDLLLLLDLLLDDLDLDL
Product Reference Guide
Read the code to end the string and the format
definition.
108
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
Match Conditions
By setting one or more of the following conditions it is possible to select the codes to be
formatted. Follow the given steps to define the desired condition.
MATCH WITH PREDEFINED SUBSTRING
Define Matching Substring
Match with Substring
AOCLFLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFABGIK
AKCBPJCJGIIJCMCFGLIFMPLLLK
AEFBJLBGMHPLMKALHFEAEHMGGK
AAPHBAJICAGKHAKKFDLLOGDNFK
AGKFAKLBIMBCELJEKCHMIJCJKK
DLDLLDLDLDLLLLLDDLLDDLDLDL
Read the above code and:
1. read a number in the range 1-5 corresponding to the desired format number;
2. set the number of characters defining the
matching string in the range 00-10;
3. read the corresponding character as Hex
value from the Hex/Numeric table identifying the substring character/s. Valid values
are in the range 00-7F.
(optional)
Define Substring Position
Matching Substring Position
AOCLFLFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEFBGIK
AKCBPJCJGIIJCMCEHIMDBAGJPK
AEFBJLBGMHPLMIDDFPLOAMFEGK
AAPHBAJIDACKLJKHLEJEICILDK
AHKFAKJLOEKKCJCHAGKIEMFLKK
DDDLLDLDDLLLLLLDLLDDDLDLDL
Read the above code and:
1. read a number in the range 1-5 corresponding to the desired format number;
2. read the number corresponding to the substring position in the range 0-255;
AND/OR
MATCH CODE LENGTH
Define Code Length
Match Code Length
AOCLFLFMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFDBHIK
AKCBPJCJGIIJCMCEHPOLDEPHNK
AEFBJLBGMHPLMJEHMIMMPOKEGK
AAPHBAJJDEGGOAGMNCEOLPDLHK
AGKFAIJFBNPEGAOAPPFAGNIILK
DLDLLDLDLDDLLLLDLDDDDLDLLL
Read the above code and:
1. read a number in the range 1-5 corresponding to the desired format number;
2. read the number in the range 0-255;
109
Gryphon™ D432/D412Plus
\
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
ADVANCED IMAGE CAPTURE
AND/OR
MATCH SYMBOLOGY
Define Code Symbology
Match Symbology
AOCLFLFMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEGBHIK
AKCBPJCJGIIJCMCFGMKNOLCFJK
AEFBJLBGMHPLMLHPOCDCLFDGGK
AAPHBAJJCECGCJGBDFGBNLINBK
AHKFAILPHFEMACFDFLIEKIPKLK
DDDLLDLDDLDLLLLDDDLDDLDLLL
Read the above code and:
1. read a number in the range 1-5 corresponding to the desired format number;
2. set the number of the matching code symbologies in the range 0-4;
3. select the Datalogic Standard Code Identifier from the Code Identifier Table in
Appendix C.
Format Enable/Disable
0
1
Product Reference Guide
Format 1
Format 2
AOCLGKHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKFFFGIK
AKCBPJCJGIIJCMCEHIMHGIADNK
AEFBJLBGMHPLNMANFIHIMLGEGK
AAPHBAJJDEENFCPPLHPEIPINFK
AHLFAOPLBBOIOHDICPOOENHIJK
DLLLLDLDDDLLLLLDLDLDDLDLDL
AOCLGKHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALEAFEIK
AKCBPJCJGIIJCMCFGOIMOKPBJK
AEFBJLBGMHPKMMHJIKOAIHPGGK
AAPHBAJICAAFFHBNOIOFGGHDBK
AELFANJIEINIIKHAPIIOAIIIIK
DLLLLDLDDDLLLLLDDDLDDLDLDL
= disabled
= enabled
0
1
= disabled
= enabled
110
Enter Reader Configuration
Exit and Save Reader Configuration
AMHKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCAFIK
AKCBPJCJGIIJCMCEGOODCCEDJK
AEFBJLBGMHPLNPGLABJHFIAEGK
AAPHBAJICCBGBIAFNLNLLAINDK
AFLFBPPCOIHKILNFFOCKOLJILK
DLDDLDDLDDLLLLLDDDLDDLDLLL
AMHKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFEGFIK
AKCBPJCJGIIJCMCEGLJKNEBJLK
AEFBJLBGMHPLMIFPAFAIIBNHGK
AAPHBAJIDGDHOJDKAICECIENBK
AGLFBOMJMHLIGBPCKIGAGOEKLK
DDLDLDDLLLDLLLLDDDDDDLDLDL
0
1
0
1
111
ADVANCED IMAGE CAPTURE
Format 3
Format 4
AOCLGKHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJAKEECFIK
AKCBPJCJGIIJCMCFHLMNIBIFPK
AEFBJLBGMHPLNIEABDLCBDLHGK
AAPHBAJICADLMIGJJAHBBHKDBK
AHKFAMOGHAIKCDGMGKCGAKOKJK
DLDLLDLDDDLLLLLDDDDDDLDLLL
AOCLGKHMHNGNENEIEPANHOGOCK
AHHPEJAMDKEOFMHMLJALFBCHIK
AKCBPJCJGIIJCMCEGNIGADHHLK
AEFBJLBGMHPKMIDEMBCKFPCFGK
AAPHBAJJDEHDMNILMPGAPOFNFK
AEKFAPIFCJLKEOCELNEGEPBKIK
DLDLLDLDDDLLLLLDLDDDDLDLLL
= disabled
= enabled
0
1
= disabled
= enabled
Format 5
Disable All Formats
AOCLGKHMHNGNENEIEPANHOGOCK
AHHPEBIMDKEOFMHMLJALFHAEIK
AKCBPJCJGIIJCMCEHMLKKMMJNK
AEFBJLBGMHPKMPEADEFGPJJEGK
AAPHBAJJCHDEJECECCCMJGDPDK
AFKFAKJMOPIMOEGBBIDKMGGLKK
DLDLLDLDDDLLLLLDDDDDDLDLLL
AOCLGKHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKFDHFIK
AKCBPJCJGIIJCMCEGJPLMHLNLK
AEFBJLBGMHPLNLHJKNAEGNNFGK
AAPHBAJJCHAKALFAFKLIOHOPDK
AGLFALOCNHNOENHNIKJCMEAJLK
DLLLLDLDDDLLLLLDDDLDDLDLDL
= disabled
= enabled
Gryphon™ D432/D412Plus
Configuration Using Code Symbols
Mismatch Result
The result of each format may be set in case the match conditions previously selected are not
satisfied.
Once the desired formats have been enabled and a code has been read, the results corresponding
to each format will be concatenated together and transmitted in the output message. For this
reason, it is strongly advised to set the mismatch result for each format.
Example
Decoded Code: <DATALOGICproduct>
Format definition:
Format
Enable/Disable
Format 1
Enabled
Format 2
Disabled
Format 3
Enabled
Format 4
Enabled
Format 5
Enabled
Match Condition
Function
Select field from
Code having a length of 16
position1 to
characters
position3
/
/
Substitute string
Code having a length of 25
"ab" with string
characters
"12"
Code having the substring Insert string "789"
in position 7
"AT" in position 2
Code belonging to the
Delete string "DA"
PDF417 symbology
and "pr"
Mismatch Result
No string
/
Unformatted read
code
Unformatted read
code
Unformatted read
code
O u tp u t m e s s a g e : < D A T D A T A L O G IC p ro d u c tD A T A L O 7 8 9 G IC p ro d u c tD A T A L O G IC p ro d u c t>
F o rm a t 1
F o rm a t 3
F o rm a t 4
F o rm a t 5
Define Mismatch Result
Mismatch Result
AOCLFLHODNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFGEIK
AKCBPJCJGIIJCMCFHPJPBJONNK
AEFBJLBGMHPKMJGONHLFIIIHGK
AAPHBAJJCDBDNKDEDGEINLGHBK
AFLFAMLJPMLKOLLPNDLGCBAIIK
DLDLLDLDDLLLLLLDDDLDDLDLDL
Read the above code and:
read a number in the range 1-5 corresponding to the desired format
number;
0 = empty string as output
1 = unformatted read code as output.
112
Gryphon™ D432/D412Plus
Chapter 5
References
RS-232 — USB COM
ACK/NACK Protocol
The transmission protocol takes place between reader and Host. Once the reader has read a
code, it emits a good read beep and passes its data to the Host.
When ACK/NACK is disabled, there is no control from reader to Host transmission.
When ACK/NACK is enabled, the Host sends an ACK character (06 HEX) in the case of good
reception or the NACK character (15 HEX) requesting re-transmission, in the case of bad
reception.
If the reader does receive an ACK, no signal will be emitted; whereas, if it does not receive an
ACK or NACK, it will emit a wrong reception tone after a few seconds.
Gryphon D432/D412Plus reader cannot read barcodes while waiting for the Host response.
RX Timeout
This parameter can be used to automatically end data reception from the Host after the specific
period of time.
If no character is received from Host, after the timeout expires, any incomplete string (any
string not terminated by <CR>) is flushed from the device buffer.
USB Keyboard
Keyboard Speed
This parameter manages the transmission speed of characters to the Host. A fast Keyboard
Speed allows rapid transmission of a great amount of characters (for example 2D codes), but it
might not be compatible with slower systems.
Product Reference Guide
113
References
Code Selection
Issue Identical Codes
This parameter manages the code transmission when more than one code containing the same
information is detected in a single scan.
All identical codes are transmitted to the Host when the parameter is enabled; if disabled, only
one of the identical codes is sent.
Reading Parameters
Safety Time
Safety time prevents the device from immediately decoding the same code more than once. A
timeout can be set up to 9.9 seconds before the decoder will accept the same code. Reading is
immediate if the code changes.
The safety time parameter is not applicable when all codes per scan is enabled or when setting
one read per cycle in normal (hardware) trigger operating mode.
Configuration Editing Commands
The following commands carry out their specific function and do not require reading the Enter
or Exit and Save Configuration codes.
114
Command
Description
AMHKGPAOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALECHGIK
AKCBPJCJGIIJCMCFGPLCMMMNLK
AEFBJLBGMHPKMOGNKKNDPDMGGK
AAPHBAJIDGHPOJKEFPNCEACBHK
AFKFBKNGLGMOMELLGOPCMJFKIK
DDDDLDLLLDDLLLLDDDLDDLDLDL
Restore Gryphon D432/D412Plus reader default configuration.
AMHKGPBOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKECBEIK
AKCBPJCJGIIJCMCEGNOKAKPHJK
AEFBJLBGMHPKMKEPKAKIOABEGK
AAPHBAJICFGFIBIPPOECDKIJBK
AFKFBMIKBFKGOMKNNGLKGNNIKK
DLLDLDLLDDLLLLLDDLDDDLDLLL
Transmit the Gryphon D432/D412Plus reader Software release.
AMHOGPBOFNGNENEIEPANHOGOCK
AHHPEBAMDKEOFMHMLJAKEACHIK
AKCBPJCJGIIJCMCEGNLFCLIPJK
AEFBJLBGMHPKMKFLEFBNBOKHGK
AAPHBAJIDGHLDGOMCOHJGAAFDK
AGKFALIMCNPOKGIEIBDIOGHIKK
DLLLLLLLDDDLLLLDLLLDDLDLDL
Transmit the Gryphon D432/D412Plus current configuration in
ASCII format to Host.
AMHOHMEMHNGNENEIEPANHOGOCK
AHPBIBAMDKEOFMHMLJALFHGFJK
AKCBPJCJGIIJCMCEHJIPFPFLNK
AEFBJLBGMHPLNOBPKFGHKGAGGK
AAPHBAJIDBEDNCGFJDBLCCBHFK
AELFAJJEFKLIMPLCLLEIOMIJLK
DDDLLLLDLDLLLLLDDDLDDLDLDL
Transmit the Gryphon D432/D412Plus current data format configuration in ASCII format to Host.
Gryphon™ D432/D412Plus
Chapter 6
Test Code Symbols
Use these 1D and 2D test symbols to check that the reader is imaging and decoding properly,
according to your configuration.
UPC-A
52637 48509
1
2
EAN-13
1 234567 000992
Code 39 (Standard)
1
7
1
6
2
Code 128
t
Product Reference Guide
e
s
t
115
Test Code Symbols
QR
PDF417
PDF417
DataMatrix (Normal)
DataMatrix (Inverse)
116
Gryphon™ D432/D412Plus
Chapter 7
Maintenance
You do not need to perform regular preventative maintenance on the Gryphon D432/
D412Plus reader.
Do not try to open the case, because you might damage the interior electronic components and
such action voids the warranty.
You can keep your reader in good operating condition by:
• periodically cleaning the reading window using water or a mild detergent solution and a
soft cloth or tissue.
• watching for any damage to the housing.
Do not use abrasive cleaning agents on the reader's window to avoid scratches.
Do not use solvents on the housing or window to avoid damage. Do not submerge the reader in water. It is not waterproof.
CAUTION
Product Reference Guide
117
Maintenance
NOTES
118
Gryphon™ D432/D412Plus
Chapter 8
Technical Features
Gryphon D432/D412Plus Family Common Features
Electrical Features
Operating Voltage (D432Plus)
(D412Plus )
Power Consumption
@ 5V
(D432Plus , Typical)
@4.75V (D432Plus , Peak current)
@ 5V
(D412Plus , Typical)
@ 4.75V (D412Plus , Peak current)
@ 14V
(D412Plus , Typical)
@ 14V
(D412Plus , Peak current)
4.75 to 5.25 V
4.75 to 24V
245 mA
330 mA
340 mA
465 mA
90 mA
135 mA
Communications Features
Standard Interfaces
Proprietary Interfaces
Environmental Features
Operating Temperature
Storage Temperature
Humidity
Drop Resistance
RS-232, Keyboard emulation AT IBM, USB COM emulation, USB Keyboard emulation, IBM USB, IBM PORT 9B
(412Plus), IBM PORT 5B (412Plus)
USB Bulk, USB Generic HID
0° to +55 °C (+32° to +131 °F)
-20° to +70 °C (-4° to +158 °F)
0 to 95% NC
IEC 68-2-32 Test ED – 1,8 m. on concrete
Mechanical Features
Dimensions
Weight
179 x 81 x 98 mm (7.04 x 3.18 x 3.85 inches)
198 g (6.9 oz.) without cable
Decoding Capability
1D
2D
Postal Codes
Imaging Options
Image
Graphic Format
Interleaved 2 of 5, Code 39, Code 32, Code 128, EAN 128, Code93, UPC/EAN/JAN, Codabar, GS1 DataBar™
Aztec, PDF417, Micro PDF417, Macro PDF417, Maxicode, 
DataMatrix (ECC200), QR, Micro QR, Composite Codes
POSTNET, PLANET, Japan Post, Australia Post, KIX Code, Royal Mail Code (RM4SCC), IMB
752 x 480 pixel format
JPEG, 256 gray levels
TIFF, 2, 16, 256 gray levels
Optical Features
Sensor
Illuminator
Product Reference Guide
752 x 480 pixel element, 2D CMOS Array
LED array
119
Technical Features
Optical Features (continued)
Wavelength
LED Safety Class
Aiming System
Wavelength
Laser Safety Class
Ambient light
Focus distance
Field of view
Horizontal field of view at distance
(d) in mm
Vertical field of view at distance (d)
in mm
Max Resolution
In the range 630 ~ 670 nm
Class 1 to EN 60825-1
Visible Laser Diode
650 nm
Class 2 - EN 60825-1; Class II CDRH
0 - 100000 lux
110 mm
39°(H)x25°(V)
0.7d + 24
0.46d + 15
Linear codes - mm
(mils)
0.10 (4)
PDF417 mm (mils)
0.10 (4)
Datamatrix – mm (mils)
0.17 (6.6)
Depth of field*
1D (linear):
X-dimension
mm (mils)
Code39
0.13 (5)
0.5 (20)
EAN13
0.33 (13)
2D:
X-dimension
mm (mils)
PDF417
0.13 (5)
0.25 (10)
DataMatrix
0.19 (7.5)
0.25 (10)
Skew
Pitch
Rotation
Print Contrast (Min.)
120
DOF
mm (in)
45 to 75 mm
(1.77 to 2.95)
50 to 320
(1.97 to 12.60)
15 to 220
(0.59 to 8.66)
DOF
mm (in)
30 to 70 mm
(1.18 to 2.76)
5 to 220
(0.20 to 8.66)
45 to 95
(1.77 to3.74)
15 to 140
(0.59 to 5.51)
±40°
±35°
360°
23%
Gryphon™ D432/D412Plus
Gryphon D432/D412 Plus™
Optical Features
Focus distance
140 mm
Field of view
28° (H) x 23° (V)
Horizontal field of view at distance (d) in
mm
0.52d + 15
Vertical field of view at distance (d) in mm
0.42d + 12
Max Resolution
Linear codes mm (mils)
PDF 417 – mm
(mils)
Datamatrix – mm
(mils)
0.10 (4 mils)
0.10 (4 mils)
0.17 (6.6 mils)
Depth of field*
1D (linear):
Code39
DOF
X-dimension
mm (mils)
cm (in)
7.5 to 15.5
0.13 (5)
(2.95 to 6.10)
5.5 to 36.5
0.5 (20)
EAN13
2D:
PDF417
QR
DataMatrix
(2.17 to 14.37)
5.0 to 27
0.33 (13)
(1.97 to 10.63)
DOF
X-dimension
mm (mils)
cm (in)
0.13 (5)
8.0 to 18.5
(3.15 to 7.28)
0.25 (10)
4.0 to 25.5
(1.57 to 10.04)
0.19 (7.5)
8.0 to 16.5
(3.15 to 6.5)
0.25 (10)
7.0 to 19.5
(2.76 to 7.68)
0.19 (7.5)
8.0 to 16.5
(3.15 to 6.5)
0.25 (10)
7.0 to 19.5
(2.76 to 7.68)
Skew
±40°
Pitch
±35°
Rotation
360°
Print Contrast (Min.)
15%
* Reading distances are measured from the nose of the reader.
NOTE: Typical performance at 20ºC / 68ºF on high quality barcodes.
Product Reference Guide
121
Technical Features
Indicators
Gryphon D432/D412Plus LED Indicators
The Gryphon D432/D412Plus family uses green LED indicators to signal the following reader
functions:
STATUS
BEHAVIOR
Power ON
At power-on, the LEDs blink briefly, then light up for 2 seconds to signal the power supply is present.
Normal Function
The LED lights up after a good decoding and will switch off only at the next trigger press.
Beeper
The Gryphon D432/D412Plus basic software provides beeper signals for good/wrong reading
and for indicating errors. Its tone, volume and duration can be directly configured by using the
codes given in the Gryphon D432/D412Plus Reference Manual available on the website.
The application program can also manage the beeper (User Defined Beeper) when the reader is
controlled by a Host PC. It is possible to activate the beeper by sending a command from the
Host to the reader via the current communication interface.
Good Read Spot
A green Good-Read Spot will be projected in the field of view when the reading is successful.
122
Gryphon™ D432/D412Plus
Appendix A
Host Configuration Strings
In this section we provide a description of how to modify the device configuration using serial
strings sent from the Host.
This method requires the RS-232, USB-Com, USB Bulk or USB Generic HID interface.
The device configuration can be changed by receiving commands from the Host through the
current interface. When this method is used, the programming sequence format is the
following:
$+
Command
$-
CR
Carriage return character (0D Hex.)
Exit and Save configuration
Character sequence in following tables
Enter configuration environment
Example
$+ GBB1 GBA1 $- CR
Carriage return character (0D Hex.)
Exit and save new configuration
Beeper tone 1
Beeper low intensity
Enter configuration environment
Each configuration parameter setting removes the condition previously active for that
parameter.
Configuring some configuration commands, such as those of advanced formatting, through strings may result very complex. For this reason they are not provided in the following tables but can be configured by using Datalogic
Aladdin™ configuration program or referring to the related section in the Configuration chapter of this manual.
Product Reference Guide
123
SERIAL CONFIGURATION STRINGS
ENTER/EXIT CONFIGURATION COMMANDS
DESCRIPTION
STRING
Enter Configuration
$+
Exit and Save Configuration
$-
Restore Default
$+$*
Transmit Software Release
$+$!
Transmit Device Configuration in ASCII
$?$&
Save Custom Default
$+$0
Restore Custom Default
$+$1
These commands do not require $-
INTERFACE SELECTION
DESCRIPTION
124
STRING
RS-232
Standard
CPA0
WEDGE
for IBM AT
CPA1
USB
USB COM
CPA3
USB-KBD
CPA4
USB Bulk
CPA2
USB Generic HID
CPA5
IBM 46XX
CPA6
USB IBM
CPA7
Gryphon™ D432/D412Plus
RS-232
DESCRIPTION
Baud rate
Parity
Data bits
Stop bits
Handshake
ACK/NACK Protocol
FIFO
STRING
1200
DAA00
2400
DAA01
4800
DAA02
9600
DAA03
14400
DAA04
19200
DAA05
38400
DAA06
57600
DAA07
115200
DAA08
none
DBA0
even
DBA2
odd
DBA1
7
DCA0
8
DCA1
1
DCB0
2
DCB1
none
DDA0
RTS/CTS
DDA2
XON/XOFF
DDA1
RTS always ON
DDA3
disabled
DDB0
enabled
DDB1
disabled
DDC0
enabled
DDC1
RX Timeout
DEB00 - DEB99
Intercharacter Delay
DEA00 - DEA99
Product Reference Guide
125
RS-232 (continued)
DESCRIPTION
STRING
Intercode Delay
DEC00 - DEC99
Serial Trigger Lock
disabled
DDB0
enabled
DDB1
Serial trigger Lock/Unlock characters
CQBxx
x = Hex value from 00 to FF
USB
DESCRIPTION
STRING
USB-COM
Handshake
ACK/NACK Protocol
FIFO
none
UDA0
RTS/CTS
UDA2
XON/XOFF
UDA1
disabled
UDB0
enabled
UDB1
disabled
UDC0
enabled
UDC1
RX Timeout
DEB00 - DEB99
Intercharacter Delay
UEA00 - UEA99
Intercode Delay
UEC00 - UEC99
USB IBM
Device Usage
Ignore Host
Commnanda
126
Table Top
UJA0
HandHeld
UJA1
Disable
UJC0
Ignore Host
UJC1
Fake Scanner Configuration
UJC2
Magellan SL Compatibility
UJC3
Gryphon™ D432/D412Plus
USB (continued)
DESCRIPTION
STRING
IBM 46XX
Protocol
Format
Port 5B (1520)
JAA0
Port 9B (4501)
JAA1
Code 39
JAB0
Mixed
JAB1
IBM Standard
JAB2
a. The Ignore Host Command can also be used for the IBM 46XX interface
DATA FORMAT
DESCRIPTION
STRING
Data Format Restore Default
EZ0
SYMBOLOGY INDEPENDENT PARAMETERS
Code Identifier
Code Length
Set Headers
Product Reference Guide
disabled
EAA0
AIM standard Code ID
EAA2
Custom Code ID
EAA1
Datalogic Code ID
EAA3
disabled
ECA0
enabled
ECA1
no header
EDA00
one character
EDA01x
two characters
EDA02xx
three characters
EDA03xxx
four characters
EDA04xxxx
five characters
EDA05xxxxx
six characters
EDA06xxxxxx
seven characters
EDA07xxxxxxx
eight characters
EDA08xxxxxxxx
127
DATA FORMAT (continued)
DESCRIPTION
Set Headers
Headers
Set Terminators
Terminators
STRING
nine characters
EDA09xxxxxxxxx
ten characters
EDA10xxxxxxxxxx
disabled
EDB0
enabled
EDB1
no terminator
EEA00
one character
EEA01x
two characters
EEA02xx
three characters
EEA03xxx
four characters
EEA04xxxx
five characters
EEA05xxxxx
six characters
EEA06xxxxxx
seven characters
EEA07xxxxxxx
eight characters
EEA08xxxxxxxx
nine characters
EEA09xxxxxxxxx
ten characters
EEA10xxxxxxxxxx
disabled
EEB0
enabled
EEB1
x, a = HEX values representing an ASCII character.
x = Hex value from 00 to FF
128
Gryphon™ D432/D412Plus
POWER SAVE
DESCRIPTION
STRING
Illumination System Power
Illumination System OFF
HAA0
Illumination System ON
HAA1
CODE SELECTION
DESCRIPTION
STRING
Disable All Symbologies
AZA0
Disable All Linear Symbologies
AXA0
Disable All 2D Symbologies
AYA0
Issue Identical Codes
disabled
AWB0
enabled
AWB1
LINEAR SYMBOLOGIES
UPC/EAN/JAN
disabled
AEA0
enabled
AEA1
Add-on
UPCE extension
Code 39
Standard
Full ASCII
Product Reference Guide
disabled
AEB0
enabled
AEB1
disabled
AEC0
enabled
AEC1
disabled
ABA0
no check digit control
ABA1
check digit control without transmission
ABA2
check digit control and transmission
ABA3
disabled
ABB0
129
CODE SELECTION (continued)
DESCRIPTION
STRING
Code Len Check
d=
ABB1
disabled
ABC0
enabled
ABC1
Minimum Code Length
ABDd
Maximum Code Length
ABEd
Start/Stop Char TX
Code 32
enabled
enabled
ABF0
disabled
ABF1
disabled
ABL0
enabled
ABL1
a number from the HEX/Numeric Table
d = a number in the range 001-255
CODE SELECTION
DESCRIPTION
STRING
LINEAR SYMBOLOGIES
Interleaved 2/5
Codabar
130
disabled
ACA0
enabled – no check digit control
ACA1
enabled – check digit control and without transmission
ACA2
enabled – check digit control and transmission
ACA3
Code Len Check
disabled
ACB0
enabled
ACB1
Minimum Code Length
ACCd
Maximum Code Length
ACDd
disabled
ADA0
enabled – no check digit control
ADA1
enabled – check digit control and without transmission
ADA2
Gryphon™ D432/D412Plus
CODE SELECTION (continued)
DESCRIPTION
Code 128
enabled – check digit control and transmission
ADA3
Code Len Check
disabled
ADB0
enabled
ADB1
Minimum Code Length
ADCd
Maximum Code Length
ADDd
disabled
AAA0
enabled
AAA1
Code Len Check
EAN 128
AAB1
Maximum Code Length
AADd
disabled
AOA0
enabled
AOA1
disabled
AOB0
enabled
AOB1
Minimum Code Length
AOCd
Maximum Code Length
AODd
disabled
AFA0
enabled
AFA1
disabled
AFB0
enabled
AFB1
Minimum Code Length
AFCd
Maximum Code Length
AFDd
GS1 DataBar Expanded
GS1 DataBar Limited
Product Reference Guide
enabled
AACd
Code Len Check
GS1 DataBar™ 
Family
AAB0
Minimum Code Length
Code Len Check
Code 93
disabled
disabled
AMA0
enabled
AMA1
disabled
AMB0
131
CODE SELECTION (continued)
DESCRIPTION
enabled
AMB1
disabled
AMC0
enabled
AMC1
GS1 DataBar Expanded
disabled
AMD0
Stacked
enabled
AMD1
GS1 DataBar Stacked
disabled
AME0
enabled
AME1
GS1 DataBar Omnidirectional
d=
a number from the HEX/Numeric Table
d = a number in the range 001-255
132
Gryphon™ D432/D412Plus
CODE SELECTION
DESCRIPTION
STRING
2D SYMBOLOGIES
PDF417
disabled
AGA0
enabled
AGA1
Macro PDF417
Micro PDF417
DataMatrix
QR Family
Micro QR
Postal Codes
Product Reference Guide
unbuffered mode
AVB0
buffered mode
AVB1
disabled
AGB0
enabled
AGB1
disabled
AHA0
enabled
AHA1
Minimum Code Length
AHCe
Maximum Code Length
AHDe
Rectangular
Style
disabled
AHE0
enabled
AHE1
disabled
AIA0
enabled
AIA1
disabled
AIB0
enabled
AIB1
all disabled
ALA0
Australian Post - enabled
ALA1
Japan Post - enabled
ALA2
PLANET - enabled
ALA3
POSTNET - enabled
ALA4
POSTNET with B and B’ - enabled
ALA5
POSTNET and PLANET - enabled
ALA6
POSTNET with B and B’ and PLANET - enabled
ALA7
KIX Code - enabled
ALA8
Royal Mail Code (RM4SCC) - enabled
ALA9
133
CODE SELECTION (continued)
DESCRIPTION
STRING
2D SYMBOLOGIES
Australian
Table
IMB
Maxicode
N Table
ALB0
C Table
ALB1
disabled
ALC0
enabled
ALC1
Mode 0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Aztec
Composite
Code
e=
disabled
AJL0
enabled
AJL1
disabled
AJM0
enabled
AJM1
disabled
AJN0
enabled
AJN1
disabled
AJO0
enabled
AJO1
disabled
AJP0
enabled
AJP1
disabled
AJQ0
enabled
AJQ1
disabled
AJR0
enabled
AJR1
disabled
AKA0
enabled
AKA2
disabled
ANA0
enabled
ANA1
Discard Linear
disabled
ANB0
Part
enabled
ANB1
a number from the HEX/Numeric Table
e = a number in the range 0001-3600
134
Gryphon™ D432/D412Plus
READING PARAMETERS
DESCRIPTION
Trigger Mode
Trigger Type
STRING
trigger level
BAA0
trigger pulse
BAA1
normal trigger
BAB0
software trigger
BAB1
Flash On Duration
BF0f
Flash Off Duration
BF1f
Beeper Tone
Beeper Volume
tone 1
GBA1
tone 2
GBA2
tone 3
GBA3
tone 4
GBA4
off
GBB0
low
GBB1
medium
GBB2
high
GBB3
Beeper Duration
Reads per Cycle
GBCf
one read per cycle
BCA0
multiple reads per cycle
BCA1
Scan Timeout
User Defined Beeper Tone
User Defined Beeper Volume
BEAf
tone 1
GBD1
tone 2
GBD2
tone 3
GBD3
tone 4
GBD4
off
GBE0
low
GBE1
medium
GBE2
high
GBE3
User Defined Beeper Duration
GBFf
Perform User Defined Beep
$?GGG
** this command carries out its specific function and does not need $+ and $-
Product Reference Guide
135
CODE ORDERING AND SELECTION
Code per Scan
Central Code Transmission
Order by Code Length
f=
one code per scan
BCB0
all codes per scan
BCB1
disabled
OAA0
enabled
OAA1
disabled
OAB0
enabled - increasing order
OAB1
enabled - decreasing order
OAB2
a number from the HEX/Numeric Table
f = a number in the range 01-99
READING PARAMETERS
DESCRIPTION
STRING
AUTOSCAN
Autoscan Mode
Autoscan Aiming System
Autoscan Hardware Trigger
Autoscan Illumination System
Safety Time
disabled
BBA0
enabled in normal mode
BBA1
enabled in pattern mode
BBA2
disabled
BBB0
enabled
BBB1
disabled
BBC0
enabled
BBC1
disabled
BBD0
enabled
BBD1
disabled
BGA0
enabled
BGA1
Safety Time Duration
Stand Autoscan Mode
136
BGBf
disabled
BBE0
normal
BBE1
Gryphon™ D432/D412Plus
READING PARAMETERS (continued)
STRING
DESCRIPTION
Aiming System Delay
Good Read Spot
f=
pattern
BBE2
disabled
BLA00
enable short
BLA03
enable medium
BLA06
enable long
BLA10
disabled
BIA0
enable short
BIA1
enable medium
BIA2
enable long
BIA3
enable continuous
BIA4
a number from the HEX/Numeric Table
f = a number in the range 01-99
ADVANCED IMAGE CAPTURE
DESCRIPTION
STRING
IMAGE PRESET 1
Basic Configuration
Image Format
JPEG format
IAA1
TIFF format
IAA2
JPEG Quality Factor
g=
IACg
a number from the HEX/Numeric Table
g = a number in the range 000-100
Product Reference Guide
137
ADVANCED IMAGE CAPTURE
DESCRIPTION
STRING
IMAGE PRESET 1
Advanced Configuration
Brightness
Contrast
Color Depth
i=
increase
IAO0IAFi
decrease
IAO1IAF1i
increase
IAP0IAEi
decrease
IAP1IAEi
2 gray levels
IAG0
16 gray levels
IAG1
256 gray levels
IAG2
a number from the HEX/Numeric Table
i = a number in the range 0-100
ADVANCED IMAGE CAPTURE
DESCRIPTION
STRING
IMAGE PRESET 2
Basic Configuration
Image Format
JPEG format
IBA1
TIFF format
IBA2
JPEG Quality Factor
IBCg
Advanced Configuration
Brightness
Contrast
Color Depth
increase
IBO0IBFi
decrease
IBO1IBF1i
increase
IBP0IBEi
decrease
IBP1IBEi
2 gray levels
IBG0
16 gray levels
IBG1
256 gray levels
IBG2
g, i = a number from the HEX/Numeric Table
g = a number in the range 000-100
i = a number in the range 0-100
138
Gryphon™ D432/D412Plus
ADVANCED IMAGE CAPTURE
DESCRIPTION
STRING
IMAGE PRESET 3
Basic Configuration
Image Format
JPEG format
ICA1
TIFF format
ICA2
JPEG Quality Factor
ICCg
Advanced Configuration
Brightness
Contrast
Color Depth
increase
ICO0ICFi
decrease
ICO1ICF1i
increase
ICP0ICEi
decrease
ICP1ICEi
2 gray levels
ICG0
16 gray levels
ICG1
256 gray levels
ICG2
g, i = a number from the HEX/Numeric Table
g = a number in the range 000-100
i = a number in the range 0-100
ADVANCED IMAGE CAPTURE
DESCRIPTION
STRING
IMAGE PRESET 4
Basic Configuration
Image Format
JPEG format
IDA1
TIFF format
IDA2
JPEG Quality Factor
IDCg
Advanced Configuration
Brightness
Product Reference Guide
increase
IDO0IDFi
decrease
IDO1IDF1i
139
ADVANCED IMAGE CAPTURE (continued)
DESCRIPTION
STRING
Contrast
Color Depth
increase
IDP0IDEi
decrease
IDP1IDEi
2 gray levels
IDG0
16 gray levels
IDG1
256 gray levels
IDG2
g, i = a number from the HEX/Numeric Table
g = a number in the range 000-100
i = a number in the range 0-100
140
Gryphon™ D432/D412Plus
Appendix B
Programming for Expert Users
This document is addressed to expert users who are familiar with software programming
languages and want to define a 1personalized code formatting. The provided programming
language allows creating either simple or complex formatting expressions by means of the basic
functions connected together through the following operators: (, ), -, +.
The syntax to be used to transmit the expressions to the Gryphon D432/D412Plus is the
following:
$+ELB<n>formatting expression<ETX>$where:
•
•
•
<n> is a number in the range 1-5 corresponding to the format to be defined;
<ETX> is the conventional character used as terminator of the command;
the formatting expression uses ASCII characters when containing text strings. For this reason, the string must be inserted between two quotation marks. The following example
shows the ASCII conversion of the "ABC" string:
$+ELB1}414243+#DS^C$-.
Product Reference Guide
141
Function Description
All the functions and conventions to be used within the formatting expressions are listed below:
FUNCTION
NAME
DESCRIPTION
FSTR
Searches for a defined substring by its starting and ending string.
FLSTR
Searches for a defined substring by its starting string and its length.
SSTR
Extracts a defined substring from the original string.
FPOS
Searches for a position of a defined substring within the original string.
LSTR
Returns a string length.
ISTR
Insert a substring in the original string.
RSTR
Substitutes a defined substring contained in the original string with a new one.
CONVENTIONS
DESCRIPTION
+
Concatenates two strings or fields.
-
Deletes a substring or a field from the original string.
#DS
Returns the string which has been decoded by the library.
#F<n>
Returns the result of a format which has been previously defined. The <n> value is in the
range 1-4.
FindStringByStarting&EndingChar (FSTR)
This function has the following syntax:
FSTR<source_string, string_start, string_stop, mode>string
This function searches for a substring having a defined starting character ("string_start") and a
defined ending character ("string_stop") within the "source_string". It returns the string you
searched for, or an empty one in case of failure.
If searching for a substring having characters already known, the "string_start" and
"string_stop" arguments must share the same value.
The "mode" argument allows managing the starting character ("string_start") and the ending
character ("string_stop"):
0 = include both starting and ending character
1 = include only starting character
2 = include only ending character
3 = discard both starting and ending character
142
Gryphon™ D432/D412Plus
FindStringByStartingChar&Len (FLSTR)
This function has the following syntax:
FLSTR<source_string, string_start, len, mode>ðstring
This function searches for a substring having a defined starting character ("string_start") and a
defined length ("len") within the "source_string". It returns the string you searched for, or an
empty one in case of failure.
If searching for a substring having a length already known, the "string_start" and "string_stop"
arguments must share the same number.
The "mode" argument allows managing the starting character ("string_start"):
0 = include starting character
1 = discard starting character
SelectString (SSTR)
This function has the following syntax:
SSTR<source_string, pos_start, pos_end>string
It extracts a substring whose characters are between "pos_start" and "pos_end" from the
"source_string".
If "pos_end" is longer than the "source_string" length, no error will be generated since the
exceeding characters are ignored.
The first character of every string is in position 1.
FindPosition (FPOS)
This function has the following syntax:
FPOS<source_string, search_string>position
This function searches for a defined substring within the "source_string" and returns its
position. If the substring is not found, the returned value is 1.
StringLength (LSTR)
This function has the following syntax:
LSTR<string>length
This function returns the length of the defined string.
StringConcatenation
This function has the following syntax:
string1 + string2string
This function allows concatenating two different strings in order to get a single string as result.
StringDiscard
This function has the following syntax:
string1 - string2string
This function discards all the strings having the same value as "string2" which can be found in
"string1". If no "string2" is found within "string1", the result returns "string1".
InsertString (ISTR)
This function has the following syntax:
Product Reference Guide
143
ISTR<source_string, string1, position>string
This function inserts a new string ("string1") within the "source_string" and places it in the
defined "position".
If the value of the "position" argument is longer than "source_string" length, "string1" will be
placed after the last character of the source string.
ReplaceString (RSTR)
This function has the following syntax:
RSTR<source_string, string1, string2>string
This function searches for "string1" within the "source_string". All the strings having the same
value as "string1" within the "source_string" will be replaced by "string2".
If no "string1" is found in the "source_string", the result returns the "source_string".
Examples
The string transmitted is 12345abcdef3790 and corresponds to the #DS function, as defined
in the programming language.
1. expression  SSTR<#DS,1,5> + SSTR<#DS,11,15> + SSTR<#DS,6,9>
result  12345f3790abcd
2. expression  FSTR<#DS, }616263~, }616263~, 0> +
SSTR<#DS,LSTR<#DS> -3, LSTR<#DS>
result  abc3790
3. expression  FSTR<#DS, 616272, 616261, 0>
result   null string
4. expression  #DS - FSTR<#DS, 616263, 6566, 0>
result 123453790
During the format definition the decoded string represented by #DS does not change.
Using Format Output in Format Definition
The input used by the above functions to define the code formatting usually corresponds to the
decoded code (#DS). Actually, the formatting expression of each function can also format the
result (output) produced by a preceding code formatting.
The format output is represented as follows:
#F<n>, where:
<n> = format number in the range 1-4
#F = format output
Being Format 5 not included in other format expression, the format number is in the range 1-4.
Furthermore, since a format expression operates upon the output of the preceding formats, the
expression defining Format 1 will never contain the result of another format.
Example
The following expression is used to define Format 3:
#DS + FSTR<#F2, 6173, 6263, 0>
The expression input consists of the decoded code and the result produced by Format 2 (#F2).
The FSTR function searches for a defined substring within the #F2 result; then, it concatenates
this substring and the decoded code. The result corresponds to #F3 output.
144
Gryphon™ D432/D412Plus
Appendix C
Code Identifier Table
EAN/UPC
CODABAR
APCPCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEGBHIK
AKCBPJCJGIIJCMCEGOMAPFDLJK
AEFBJLBGMHPLMNBJDBAMFHOEGK
AAPHBAJJCCDBJLHEJOHAEJBBFK
AEKFAMIOGAHEOFFNJLAMEFIJKK
DLDLLLDLDLDLLLLDLDDDDLDLDL
APCPCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEEHFIK
AKCBPJCJGIIJCMCFGJKHILNJLK
AEFBJLBGMHPLMNGOJAGECBEFGK
AAPHBAJICHELJEAHOIHPKBLLFK
AFLFAIKFBDOOEJMDCFEIOGNIJK
DLLLLLDLLLLLLLLDDLDDDLDLLL
CODE 128
EAN 128
APCLGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFFDEIK
AKCBPJCJGIIJCMCEGPKEHAMLLK
AEFBJLBGMHPKNKGMHMAGPDIFGK
AAPHBAJICHAPGJKOACPJFHKLBK
AHLFAOIHKPPIGNIKBLPOMOHKJK
DLLLLLDLLLDLLLLDDLDDDLDLDL
APCPGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFHEGIK
AKCBPJCJGIIJCMCEGJKOCJLBJK
AEFBJLBGMHPLMODJKELEOGJGGK
AAPHBAJIDHCOFOGHOJOKLEHPDK
AEKFAONHFDEIAADCBCKGGBAILK
DDDLLDDLLLDLLLLDLLDDDLDLLL
CODE 93
CODE 32
APCLGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFHFGIK
AKCBPJCJGIIJCMCFGIMDAOCJJK
AEFBJLBGMHPKNKBLNNGOIFCEGK
AAPHBAJJCCHFGGNNHEPGLPABBK
AGKFAKKMNMGCMBBEKFLKGNCLKK
DLDLLLDLDLLLLLLDLDDDDLDLLL
APCPCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFBCGIK
AKCBPJCJGIIJCMCEGMNHNPOLLK
AEFBJLBGMHPLNJANKACLDPEFGK
AAPHBAJICDAPKPFIDKBFCMLPBK
AHKFAPOMHMIKOKBFOEOMOENKLK
DLLLLDDLDDLLLLLDLLLDDLDLDL
Product Reference Guide
145
CODE 39
INTERLEAVED 2 OF 5
APCLCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFDFEIK
AKCBPJCJGIIJCMCEGKNNIGJBJK
AEFBJLBGMHPKMNFIHIJJCKFGGK
AAPHBAJIDDCOJIJBNBAGMPGLDK
AELFAPLMIADKIHKNONLEELKIJK
DDDLLLDLDDLLLLLDDLLDDLDLLL
APCLCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFBDGIK
AKCBPJCJGIIJCMCFGNLKPIHDLK
AEFBJLBGMHPKMNCPNJPBFMPHGK
AAPHBAJJDGFEJHOCKHAJCHMBDK
AFKFALJHPDKACLDDFDPAOIPJKK
DDLLLLDLLDDLLLLDLDLDDLDLDL
PDF417
MICRO PDF417
AODOCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEBAEIK
AKCBPJCJGIIJCMCFGIPGNMEDNK
AEFBJLBGMHPKNOGALBGPKNLGGK
AAPHBAJICEHBNDJJHFEKLMPFDK
AGKFAMMJMJLMMIAKCJJKCCGLIK
DDDLLLDLLLLLLLLDLDDDDLDLLL
AODOGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEFFHIK
AKCBPJCJGIIJCMCEGLJEOBIBLK
AEFBJLBGMHPLNLCIAOOOEIFEGK
AAPHBAJJDGAIHHAHIFKBIIBLDK
AGLFAPLHFKGMKJHGIDOOKBFKIK
DDDLDLDLDLLLLLLDDDDDDLDLLL
DATAMATRIX
MAXICODE
AODKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCCHIK
AKCBPJCJGIIJCMCFGJJCFJLDPK
AEFBJLBGMHPLMJBFPMGFAJNHGK
AAPHBAJJCBEPCBEDOJMDKCEPHK
AFLFAOMAAGDAEANNKJGIKJJILK
DDLLLLDLDLLLLLLDDLDDDLDLLL
AODOCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEDGGIK
AKCBPJCJGIIJCMCEGPJBKCKBPK
AEFBJLBGMHPKNOBHBAAHNLBHGK
AAPHBAJJCBALNMOKADEFFEFPDK
AHLFAIOCLKCGGEJEJHNOIBDKLK
DDLLLLDLDLDLLLLDDLDDDLDLDL
QR
Micro QR
AODKGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFAEFIK
AKCBPJCJGIIJCMCEGOPFCHFBNK
AEFBJLBGMHPLMJGCFNANHPHGGK
AAPHBAJICEDFCODAJPMMEKOFHK
AEKFAKOLHFKKOMEDBHCMAKMJIK
DDDLLLDLLLDLLLLDLDDDDLDLDL
146
Gryphon™ D432/D412Plus
AUSTRALIA POST
JAPAN POST
AODKCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFGCFIK
AKCBPJCJGIIJCMCEGLIMNBALPK
AEFBJLBGMHPLNOFGFJJCKGKFGK
AAPHBAJIDABENPAPEMDDNCCFFK
AHKFALNAFKGIAGGEOBGGIPBLIK
DLLLLLDLDDLLLLLDLDLDDLDLLL
AODOGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFAFFIK
AKCBPJCJGIIJCMCFGPJIAAMJNK
AEFBJLBGMHPKNNEACENHBMMEGK
AAPHBAJJDBGOBGIKACNAEBJLFK
AGKFAOJAPKIACNGFKADAAGOKJK
DLDLLDDLDLLLLLLDLLDDDLDLDL
POSTNET
PLANET
AODOCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFGDFIK
AKCBPJCJGIIJCMCFGKOBPGJDPK
AEFBJLBGMHPKMKHECAEIMFBHGK
AAPHBAJJCFEPOHLFNBCPNJFLHK
AFKFAPKLNFECMHECFGHKIDDIJK
DDLLLDDLLDDLLLLDLLLDDLDLLL
AODOGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCDHIK
AKCBPJCJGIIJCMCEGIPPHOCLPK
AEFBJLBGMHPKNNDHIFLPGKGFGK
AAPHBAJIDEBEBJPJHENPKJDBFK
AHLFAKLLIJBKIBPLBOHEKFLLKK
DLLLLDDLLLDLLLLDDDDDDLDLLL
GS1 DATABAR
KIX CODE
AODOCIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFEFHIK
AKCBPJCJGIIJCMCEGNIGIIHBNK
AEFBJLBGMHPKMKADIBCALDLGGK
AAPHBAJICADFOIMGKHCADBPBHK
AELFALIAKGNIGLNMOIDOCAGJKK
DDDLLDDLDDLLLLLDDDLDDLDLDL
AODKGMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEFBGIK
AKCBPJCJGIIJCMCFGLIFHDGDNK
AEFBJLBGMHPLNNABGNECGBHGGK
AAPHBAJICAHBBFGPENKGMHOBDK
AGLFANKCBKMOEPJFNGIIAIMLKK
DDDLLDDLDDDLLLLDDDLDDLDLLL
RM4SCC
IMB
AODKGIHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEHHEIK
AKCBPJCJGIIJCMCEGMOCANIBPK
AEFBJLBGMHPLNNHGMMCKBHNHGK
AAPHBAJJCFALBKBMDLKJCPELDK
AHKFAJIJGJFEODALGIMMKLJKJK
DDLLLDDLLDLLLLLDLLLDDLDLDL
AZTEC
AODKCMHOFNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFEEHIK
AKCBPJCJGIIJCMCFGMOLKPOJNK
AEFBJLBGMHPLNOCBPIPKNAAEGK
AAPHBAJJDFGONAHMDKDMDKIPFK
AGLFAPPLCJPCKKPKFPCCCMEKLK
DLDLLLDLLDDLLLLDDLLDDLDLDL
Product Reference Guide
147
NOTES
148
Gryphon™ D432/D412Plus
Appendix D
Hex and Numeric Table
CHARACTER TO HEX CONVERSION TABLE
char
decimal
hex
char
decimal
hex
char
decimal
hex
NUL
000
00
*
042
2A
U
085
55
SOH
001
01
+
043
2B
V
086
56
STX
002
02
,
044
2C
W
087
57
ETX
003
03
-
045
2D
X
088
58
EOT
004
04
.
046
2E
Y
089
59
ENQ
005
05
/
047
2F
Z
090
5A
ACK
006
06
0
048
30
[
091
5B
BEL
007
07
1
049
31
\
092
5C
BS
008
08
2
050
32
]
093
5D
HT
009
09
3
051
33
^
094
5E
LF
010
0A
4
052
34
_
095
5F
VT
011
0B
5
053
35
`
096
60
FF
012
0C
6
054
36
a
097
61
CR
013
0D
7
055
37
b
098
62
SO
014
0E
8
056
38
c
099
63
SI
015
0F
9
057
39
d
100
64
DLE
016
10
:
058
3A
e
101
65
DC1
017
11
;
059
3B
f
102
66
DC2
018
12
<
060
3C
g
103
67
DC3
019
13
=
061
3D
h
104
68
Product Reference Guide
149
150
DC4
020
14
>
062
3E
i
105
69
NAK
021
15
?
063
3F
j
106
6A
SYN
022
16
@
064
40
k
107
6B
ETB
023
17
A
065
41
l
108
6C
CAN
024
18
B
066
42
m
109
6D
EM
025
19
C
067
43
n
110
6E
SUB
026
1A
D
068
44
o
111
6F
ESC
027
1B
E
069
45
p
112
70
FS
028
1C
F
070
46
q
113
71
GS
029
1D
G
071
47
r
114
72
RS
030
1E
H
072
48
s
115
73
US
031
1F
I
073
49
t
116
74
SPACE
032
20
J
074
4A
u
117
75
!
033
21
K
075
4B
v
118
76
"
034
22
L
076
4C
w
119
77
#
035
23
M
077
4D
x
120
78
$
036
24
N
078
4E
y
121
79
%
037
25
O
079
4F
z
122
7A
&
038
26
P
080
50
{
123
7B
'
039
27
Q
081
51
|
124
7C
(
040
28
R
082
52
}
125
7D
)
041
29
S
083
53
~
126
7E
T
084
54
DEL
127
7F
Gryphon™ D432/D412Plus
0
1
ANFOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFHBHIK
AKCBPJCJGIIJCMCFGPOFMJLDJK
AEFBJLBGMHPKNIFGJCGBBDNHGK
AAPHBAJJDEBJCDJAGBDLGHNFHK
AFKEBJJPCPKMAJNAMBKKKCFJKK
DLDLLLDDDLLLLLLDLLDDDLDLLL
ANEPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEHEEIK
AKCBPJCJGIIJCMCEHPLFIKNHNK
AEFBJLBGMHPKMKGPIEMNLKLEGK
AAPHBAJIDGFBMBLDDDNIEPNNFK
AEKEBJMNMOKOIOPNEFCOIJJLJK
DLDLLLDDLDDLLLLDDDLDDLDLLL
2
ANEOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEFGHIK
AKCBPJCJGIIJCMCEGMILJPPDNK
AEFBJLBGMHPKMKEKGKAMOGNEGK
AAPHBAJJDEFNLJHLIGJCCKKLDK
AELEBMKKGLEGCCHPLDIKICJLLK
DDLLLLDDDLDLLLLDLLLDDLDLLL
3
4
AMFPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKECHEIK
AKCBPJCJGIIJCMCFGKLNLGILJK
AEFBJLBGMHPLNJDDOKGPBMIGGK
AAPHBAJIDCBNPBJGGNKINPEPFK
AGLEBMONMCIOAPCIABBMOFHJJK
DLLLLLDDLLLLLLLDLLLDDLDLDL
AMFOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEAFHIK
AKCBPJCJGIIJCMCFHJIDKDKPJK
AEFBJLBGMHPLNJBGAEKOEAOGGK
AAPHBAJJDABBIJFONIOCLKDJDK
AGKEBJIKGHGGKDKKPHLIOOHJLK
DDDLLLDDDDLLLLLDDDLDDLDLDL
Product Reference Guide
151
5
6
AMEPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFAAEIK
AKCBPJCJGIIJCMCEGJNDOAMLNK
AEFBJLBGMHPLMLCPBCACOJIFGK
AAPHBAJIDCFJGLHNIKABJCDBBK
AHKEBJNIIGGECEIHHDDMMFLLIK
DDDLLLDDLLDLLLLDLLDDDLDLDL
AMEOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCCHIK
AKCBPJCJGIIJCMCEHKONPFOPNK
AEFBJLBGMHPLMLAKPMMDLFOFGK
AAPHBAJJDAFFBDLFDPELPHEHHK
AHLEBMLPCDIMIIAFIFJIMOLLKK
DLLLLLDDDDDLLLLDDDDDDLDLDL
7
ANFNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCHFIK
AKCBPJCJGIIJCMCEHJLAGJEHJK
AEFBJLBGMHPKMMHJBODNLMGFGK
AAPHBAJIDFBCOHNDCJGDNMAPDK
AHKEBNOMACIOMCLCEECKCIFKLK
DDLLLLDDDDLLLLLDDLLDDLDLDL
152
8
9
ANFMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFAFGIK
AKCBPJCJGIIJCMCEGKIOHMGDJK
AEFBJLBGMHPKMMFMPAPMOAAFGK
AAPHBAJJDHBOJPBLJMCJLJHJFK
AHLEBIILKHGGGODALCIOCDFKJK
DLDLLLDDLLLLLLLDLDLDDLDLDL
ANENGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEAAFIK
AKCBPJCJGIIJCMCFHKNODPAHNK
AEFBJLBGMHPKNOGFOGFAEJGGGK
AAPHBAJIDFFGHNDIMOMKJBHBHK
AGLEBINJEGGEOJBNDGAKAIJIKK
DLDLLLDDDDDLLLLDDLDDDLDLDL
Gryphon™ D432/D412Plus
A
B
APCPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFABHIK
AKCBPJCJGIIJCMCEHLIFKKKFJK
AEFBJLBGMHPKNMFGFGAOPLOGGK
AAPHBAJJDAECFFJNDGOFJPBHFK
AFKEBKMFNHHIOOPEFNLCMAMLLK
DLLLLLDDLDDLLLLDDLDDDLDLLL
APCOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCDEIK
AKCBPJCJGIIJCMCEGILLLPIBJK
AEFBJLBGMHPKNMHDLIMPKHIGGK
AAPHBAJIDCEOCNFFIDKPPKGBDK
AFLEBPKCHCJAECHGKLBGMLMLJK
DDDLLLDDDLDLLLLDLDDDDLDLLL
C
D
AODPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFFCHIK
AKCBPJCJGIIJCMCFGOINJGPJNK
AEFBJLBGMHPLMPAKDIKMFNNEGK
AAPHBAJJDEAOGFLIGIJFAPIFFK
AHLEBPOFNLFIGPCBBJIAKMCJLK
DLDLLLDDLLLLLLLDLDDDDLDLDL
AODOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFHAEIK
AKCBPJCJGIIJCMCFHNLDIDNNNK
AEFBJLBGMHPLMPCPNGGNABLEGK
AAPHBAJIDGACBNHANNNPGKPDDK
AHKEBKICHOLAMDKDOPCEKHCJJK
DDLLLLDDDDLLLLLDDLDDDLDLDL
E
F
AOCPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEHFHIK
AKCBPJCJGIIJCMCEGNODMALJJK
AEFBJLBGMHPLNNBGMAMBKINHGK
AAPHBAJJDEEKPPFDIPDMECPLBK
AGKEBKNAJPLCEEIOGLKAIMOLKK
DDLLLLDDLLDLLLLDLDLDDLDLDL
AOCOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEFHEIK
AKCBPJCJGIIJCMCEHONNNFJNJK
AEFBJLBGMHPLNNDDCOAAPELHGK
AAPHBAJIDGEGIHJLDKHGCHINHK
AGLEBPLHDKFKOIAMJNAEIHOLIK
DLDLLLDDDDDLLLLDDLLDDLDLDL
Product Reference Guide
153
AUTOSCAN PATTERN CODE
ÌÄÄsÎ
154
Gryphon™ D432/D412Plus
NOTES
Product Reference Guide
155
NOTES
156
Gryphon™ D432/D412Plus
Australia
Datalogic Scanning Pty Ltd
Telephone: [61] (2) 9870 3200
australia.scanning@datalogic.com
Japan
Datalogic Scanning KK
Telephone: 81 (0)3 3491 6761
japan.scanning@datalogic.com
France and Benelux
Datalogic Scanning SAS
Telephone: [33].01.64.86.71.00
france.scanning@datalogic.com
Latin America
Datalogic Scanning, Inc
Telephone: (305) 591-3222
latinamerica.scanning@datalogic.com
Germany
Datalogic Scanning GmbH
Telephone: 49 (0) 61 51/93 58-0
germany.scanning@datalogic.com
Singapore
Datalogic Scanning Singapore PTE LTD
Telephone: (65) 6435-1311
singapore.scanning@datalogic.com
India
Datalogic Scanning India
Telephone: 91- 22 - 64504739
india.scanning@datalogic.com
Iberia
Datalogic Scanning SAS Sucursal en España
Telephone: 34 91 746 28 60
spain.scanning@datalogic.com
Italy
Datalogic Scanning SpA
Telephone: [39] (0) 39/62903.1
italy.scanning@datalogic.com
United Kingdom
Datalogic Scanning LTD
Telephone: 44 (0) 1582 464900
uk.scanning@datalogic.com
www.scanning.datalogic.com
Datalogic Scanning, Inc.
959 Terry Street
Eugene, OR 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
©2009-2010 Datalogic Scanning, Inc.
R44-2960 (Rev E)
Oct-2010