Samsung GH68-08186A User`s guide

* Depending on the software installed or your service provider or country,
some of the descriptions in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear
different from the illustrations in this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-08186A
English.12/2005 Rev.1.1
SGH-E360
User’s Guide
Drive safely at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Keep your phone away from small children
All wireless phones may be subject to interference,
which could affect their performance.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
• The phone could explode if the battery is replaced
with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Qualified service
Emergency calls
For more detailed safety information, see "Health and
safety information" on page 88.
Key in the emergency number for your present
location, then press
.
Important safety precautions
Interference
Only qualified service personnel may repair your
phone.
1
About this Guide
•
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful attention
to the subsequent information regarding safety
or phone features.
Indicates that you can get more information on
the referenced page.
→
Indicates that you need to press the Navigation
keys to scroll to the specified option and then
select it.
[
]
< >
2
Indicates a key on the phone. For example,
[
].
Indicates a soft key, whose function is displayed
on the phone screen. For example, <Menu>
Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
Special features of your phone
•
FM radio
Listen to your favourite radio
channels anytime, anywhere.
•
MP3 player
Play MP3 music files using your
phone as an MP3 player.
•
•
Get personal with photo caller
ID
See who’s calling you when their
very own photo displays.
•
Name card
Create name cards with your
number and profile.
•
Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, images, video, and audio.
•
SOS message
Send SOS messages to your family or friends for
help in an emergency.
•
E-mail
Send and receive e-mails with images, video, and
audio attachments.
•
Web browser
Access the wireless web to get
current information and up-to-theminute a wide variety of media
content.
•
Java
Enjoy Java™-based embedded
games and download new games.
•
Calendar
Keep track of your daily, weekly,
and monthly schedule.
•
Voice recorder
Record memos or sounds.
Special features of your phone
Bluetooth
Transfer media files and personal
data and connect to other devices
using free, wireless Bluetooth
technology.
3
Contents
Unpack
6
Make sure you have each item
Your phone
6
Buttons, features, and locations
Get started
7
First steps to operating your phone
4
Browse the web......................................................
Use Phonebook ......................................................
Send messages ......................................................
View messages.......................................................
Use Bluetooth ........................................................
Quickly launch menus by number .............................
Send SOS messages ...............................................
16
17
18
19
20
21
22
Enter text
23
ABC, T9, Number, and Symbol mode
Call functions
Install and charge the phone ..................................... 7
Power on or off........................................................ 8
Keys and display ..................................................... 9
Access menu functions ............................................ 11
Customise your phone............................................. 12
Make/Answer calls .................................................. 14
Advanced calling features
Step outside the phone
Help and personal needs
14
Menu functions
26
30
All menu options listed
Solve problems
86
Begin with your camera, MP3 player, web, and other special
features
Health and safety information
88
Use the camera ...................................................... 14
Play MP3s .............................................................. 15
Index
95
Overview of menu functions
To access Menu mode, press <Menu> in Idle mode.
1 Call records
p. 30
3 Applications
p. 36
5 Messages
1
2
3
4
5
6
7
p. 30
p. 30
p. 30
p. 31
p. 31
p. 31
p. 31
1 MP3 player
2 Voice recorder
3 Java world
4 FM radio
5 World time
6 Alarm
7 Calculator
8 Convertor
9 Timer
10 Stopwatch
11 SIM AT*
p. 36
p. 38
p. 39
p. 40
p. 42
p. 42
p. 43
p. 43
p. 44
p. 44
p. 44
1
2
3
4
5
6
7
8
4 Browser
p. 44
1
2
3
4
5
6
p. 45
p. 46
p. 46
p. 46
p. 46
p. 47
Recent contacts
Missed calls
Dialled calls
Received calls
Delete all
Call time
Call costs*
2 Phonebook
p. 32
1
2
3
4
5
6
7
8
9
p. 32
p. 32
p. 33
p. 34
p. 34
p. 35
p. 35
p. 35
p. 36
Contact list
FDN list
Add new contact
Group
Speed dial
My name card
Own number
Management
Service number*
Home
Bookmarks
Go to URL
Clear cache
Profile settings
Current profile
p. 48
Create new message p.
My messages
p.
Templates
p.
Delete all
p.
Settings
p.
SOS message
p.
Broadcast messages p.
Memory status
p.
48
51
55
56
56
61
62
62
6 File manager
p. 62
1
2
3
4
5
6
p. 62
p. 63
p. 64
p. 64
p. 65
p. 65
Images
Videos
Music
Sounds
Other files
Memory status
7 Calendar
8 Camera
p. 69
9 Settings
p. 74
1 Time & Date
2 Phone settings
3 Display settings
4 Sound settings
5 Light settings
6 Network services
7 Bluetooth
8 Security
9 Memory status
10 Reset settings
p. 74
p. 75
p. 77
p. 78
p. 79
p. 79
p. 82
p. 84
p. 85
p. 85
* Shows only if supported by your
SIM card.
p. 65
5
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Earpiece
Display
Phone
Battery
Travel Adapter
User’s Guide
You can obtain various accessories from
your local Samsung dealer.
The items supplied with your phone
and the accessories available at your
Samsung dealer may vary, depending
on your country or service provider.
6
Headset jack
Left soft key
Volume keys
Dial key
Alphanumeric
keys
Special
function keys
Navigation keys
(Up/Down/Left/
Right)
Web access/
Confirm key
Camera lens
Right soft key
Power on/off/
Menu exit key
MP3 player/
FM radio
control keys
Delete key
Microphone
External
display
Camera key
Get started
Install the battery.
First steps to operating your phone
Plug the travel adapter
into the phone.
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
Remove the battery.
Insert the SIM card.
Plug the adapter into a standard AC wall outlet.
When the phone is completely charged (the
battery icon becomes still), unplug the adapter
from the power outlet.
If the phone is already
on, first turn it off by
holding [
].
Make sure that the goldcoloured contacts on the
card face down into the
phone.
7
Get started
Remove the adapter from the phone.
Power on or off
Switch on
1. Open the phone.
2. Press and hold [
the phone.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the low battery message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
8
] to turn on
Do not turn on
the phone when
mobile phone
use is prohibited.
3. If necessary, enter the PIN and
press <OK>.
Switch off
1. Open the phone.
2. Press and hold [
].
Keys and display
Perform the function indicated on the bottom
line of the display.
Enter special characters.
In Idle mode, press and hold [ ] to activate
or deactivate Quiet mode. Press and hold
[ ] to enter a pause between numbers.
In Idle mode, access your favourite menus
directly.p. 75
In Menu mode, scroll through menu options.
In Idle mode, launch the web browser.
In Menu mode, select the highlighted menu
option or confirm input.
Make or answer a call.
In Idle mode, retrieve the recent numbers
dialled, missed, or received.
Delete characters from the display.
End a call.
Press and hold to switch the phone on or off.
In Menu mode, cancel input and return the
phone to Idle mode.
Get started
Enter numbers, letters, and some special
characters.
In Idle mode, press and hold [1] to access
your voicemail server. Press and hold [0] to
enter an international call prefix.
Keys
Adjust the phone volume.
In Idle mode, with the phone open, adjust
the keypad tone volume. With the phone
closed, hold down to turn on the backlight.
In Idle mode, press and hold to turn on the
camera.
(on the right) In Camera mode, take a photo or record a
video.
(on the front)
Press and hold to display the function
selection screen to access the MP3 player or
the FM radio.
In the MP3 player, start or stop playback.
In the FM radio, turn the radio on or off.
9
Get started
Move back to the previous file during
playback.
(on the front) Scan through radio channels.
(on the front)
Skip to the next file during playback.
Scan through radio channels.
Display
Layout
Icons
display various icons.
Text and graphics
display messages,
instructions, and
information you enter.
Menu
Icons*
10
Contacts
Soft key function
indicators
show the current functions
assigned to the soft keys.
Received signal strength
Call in progress
Out of your service area; you
cannot make or receive calls
Alarm set
New text message
New multimedia message
New e-mail
New voicemail
One of the message Inboxes is full
SOS message
p. 61
Call diverting feature active
Bluetooth active
Connected to Bluetooth hands-free
car kit or headset
GPRS network
Roaming network
Home Zone, if registered for the
appropriate service
Office Zone, if registered for the
appropriate service
Call ringer set to vibrate
Quiet mode
Mute mode, during a call
Battery power level
* Depending on your country or service provider, the icons
shown on the display may vary.
Access menu functions
Use the soft
keys
Select
1. Press the appropriate soft key.
2. Press the Navigation keys to
move to the next or previous
option.
Get started
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current role.
Select an
option
3. Press <Select> or [
] to
confirm the function displayed
or option highlighted.
Back
4. To exit, choose either of the
following methods.
• Press <Back> to move up
one level.
• Press [ ] to return to Idle
mode.
Press the left
soft key to select
the highlighted
option.
Press the right
soft key to return
to the previous
menu level.
Use shortcuts
Press the number key
corresponding to the option you
want. For the index numbers 10 and
11, press [0] and [ ] respectively.
11
Get started
Customise your phone
Display
language
1. In Idle mode, press <Menu>
and select Settings → Phone
settings → Language.
Idle mode
wallpaper
1. In Idle mode, press <Menu>
and select Settings → Display
settings → Wallpaper → Main
display or Cover display.
2. Select a language.
Call ringer
melody
2. Select an image category.
1. In Idle mode, press <Menu>
and select Settings → Sound
settings → Incoming call →
Ring tone.
3. Select an image.
4. Press <Select>.
5. Press <Save>.
2. Select a ringtone category.
3. Select a ringtone.
4. Press <Save>.
You can set wallpaper for the idle
screen on each display.
Menu mode
skin colour
You can change the colour for the
display components, such as title
bars and highlight bars.
1. In Idle mode, press <Menu>
and select Settings → Display
settings → Skin.
2. Select a colour pattern.
12
Menu
shortcuts
You can set the Navigation keys as
shortcuts to access your favourite
menus.
2. Select a key.
3. Select a menu to be assigned to
the key.
Quiet mode
You can switch the phone to Quiet
mode to avoid disturbing other
people.
Press and hold [
] in Idle mode.
You can protect the phone against
unauthorised use with a phone
password. The phone will require
the password on power-up.
Get started
1. In Idle mode, press <Menu>
and select Settings → Phone
settings → Short cut.
Phone lock
1. In Idle mode, press <Menu>
and select Settings →
Security → Change
password.
2. Enter the default password,
00000000, and press <OK>.
3. Enter a new 4- to 8-digit
password and press <OK>.
4. Enter the new password again
and press <OK>.
5. Select Phone lock.
6. Select Enable.
7. Enter the password and press
<OK>.
13
Make/Answer calls
Make a call
Step outside the phone
1. In Idle mode, enter an area
code and phone number.
Begin with your camera, MP3 player, web, and other
special features
2. Press [
Use the camera
].
3. To end the call, press [
Answer a call
1. When the phone is ringing,
press [ ].
2. To end the call, press [
Adjust the
volume during
a call
].
Take a photo
].
1. Open the phone.
2. In Idle mode, press and hold
[ ] to turn on the camera.
3. Aim the lens at the subject and
adjust the image.
Press [ / ].
4. Press [ ] to take a photo. The
photo is saved automatically.
5. Press <Back> to return to
Capture mode.
View a photo
1. In Idle mode, press <Menu>
and select File manager →
Images → Photos.
2. Select the photo you want.
14
Record a video 1. In Idle mode, press and hold
[ ] to turn on the camera.
3. Press [
Copy MP3 files
to the phone
] to start recording.
4. Press [ ] to stop recording.
The video is saved
automatically.
5. Press <
video.
Play a video
> to record another
1. In Idle mode, press <Menu>
and select File manager →
Videos → Videos.
2. Select the video you want.
Create a play
list
Use these methods:
•
Download from the wireless
webp. 44
•
Download from a computer
using the optional Samsung PC
StudioSamsung PC Studio
User’s Guide
•
Receive via Bluetoothp. 84
Step outside the phone
2. Press [1] to switch to Record
mode.
Play MP3s
1. In Idle mode, press <Menu>
and select Applications →
MP3 player.
2. Press <Options> and select
Add to list → Add all or Add a
file.
3. For Add a file, press [
] to
select the files you want and
press <Add>.
15
Step outside the phone
4. Press <Back> to return to the
MP3 player screen.
Play MP3 files
1. From the MP3 player screen,
press [
].
2. During playback, use the
following keys:
•
: pauses or resumes
playback.
• Left: moves back to the
previous file. Moves
backward in a file when
pressed and held.
• Right: skips to the next file.
Skips forward in a file when
pressed and held.
• Up: opens the play list.
•
/ : adjusts the volume.
• Down: stops playback.
16
Browse the web
Using a built-in web browser, you can get easy access
to the wireless web to get a variety of up-to-date
services and information and to enjoy downloads of
web content.
Launch the
web browser
In Idle mode, press [
Navigate the
web
•
To scroll through browser items,
press [Up] or [Down].
•
To select an item, press [
•
To return to the previous page,
press <Back> or [C].
•
To access browser menu
options, press [ ] or select .
To access web page options,
press [ ].
•
].
].
Use Phonebook
Find an entry
Add an entry
To the phone’s memory:
3. Select an entry.
2. Select Phone → a number type.
4. Press <Save> to save the
entry.
To the SIM card:
1. In Idle mode, enter a phone
number and press <Save>.
2. Select SIM.
3. Enter a name.
4. Press <Save> to save the
entry.
Step outside the phone
2. Enter a name or scroll to an
entry.
1. In Idle mode, enter a phone
number and press <Save>.
3. Specify contact information:
First name, Last name, Mobile,
Home, Office, Fax, Other, Email,
Graphic ID, Alert, Group, and
Notes.
1. In Idle mode, press
<Contacts>.
4. Scroll to a number and press
[
] to dial, or press [
] to
edit contact information.
Create and
send a name
card
1. In Idle mode, press <Menu>
and select Phonebook → My
name card.
2. Specify your contact
information.
3. Press <Save> to save the
name card.
4. To send the name card to other
people, press <Options> and
select Send via → a sending
method.
17
Step outside the phone
Send messages
1. In Idle mode, press <Menu>
Send a text
and select Messages → Create
message (SMS)
new message → Text
message.
2. Enter the message text.
3. Press <Options> and select
Save and send or Send only.
4. Enter destination numbers.
5. Press [
] to send the
message.
Send a
multimedia
message
(MMS)
1. In Idle mode, press <Menu>
and select Messages → Create
new message → Multimedia
message.
2. Select Subject.
3. Enter the message subject and
press [
].
18
4. Select Picture & Video or
Sound.
5. For Picture & Video, select
Picture or Video and add an
image or video clip.
For Sound, select a sound
category and add a sound clip.
6. Select Message.
7. Enter the message text and
press [
].
8. Press <Options> and select
Send.
9. Enter destination numbers or
e-mail addresses.
10. Press [
] to send the
message.
2. Select Subject.
View messages
View a text
message
From the Inbox:
4. Select Message.
1. In Idle mode, press <Menu>
and select Messages → My
messages → Inbox.
5. Enter the e-mail text and press
[
].
6. Select File attach.
8. Press <Options> and select
Send.
9. Enter e-mail addresses.
10. Press [
] to send the e-mail.
1. Press <View>.
2. Select the message from the
Inbox.
3. Enter the e-mail subject and
press [
].
7. Add image, video, sound, music
files, or document files.
When a notification appears:
Step outside the phone
Send an e-mail 1. In Idle mode, press <Menu>
and select Messages → Create
new message → Email.
2. Select an SMS message (
View a
multimedia
message
).
When a notification appears:
1. Press <View>.
2. Press <Options> and select
Retrieve.
3. Select the message from the
Inbox.
19
Step outside the phone
View a
multimedia
message
(continued)
1. In Idle mode, press <Menu>
and select Messages → My
messages → Inbox.
2. Select an MMS message (
View an e-mail
Use Bluetooth
From the Inbox:
).
1. In Idle mode, press <Menu>
and select Messages → My
messages → Email box.
2. Select Check new mail to
download new e-mails or
headers.
3. Select an e-mail or a header.
4. If you selected a header, press
<Options> and select
Retrieve.
20
Your phone is equipped with Bluetooth technology
which enables you to connect the phone wirelessly to
other Bluetooth devices and exchange data with them,
talk hands-free, or control the phone remotely.
Turn on
Bluetooth
In Idle mode, press <Menu> and
select Settings → Bluetooth →
Activation → On.
Search for and
pair with a
Bluetooth
device
1. In Idle mode, press <Menu>
and select Settings →
Bluetooth → My devices →
Search new device.
2. Select a device.
3. Enter a Bluetooth PIN or the
other device’s Bluetooth PIN, if
it has one, and press <OK>.
When the owner of the other
device enters the same code,
pairing is complete.
Send data
1. Access an application,
Phonebook, File manager, or
Calendar.
3. Press <Options> and select
Send via → Bluetooth.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press <OK>.
Receive data
To receive data via Bluetooth, your
phone’s Bluetooth feature must be
active.
If necessary, press <Yes> to
confirm the reception.
Access
applications
You can quickly access the alarm,
convertor, and calendar applications
from the dialling screen.
1. For an alarm or scheduled
event, enter the time you want
as 4-digit in Idle mode.
For the convertor, enter the first
number you want to use.
2. Press one of the Navigation
keys.
You can access the following
applications:
Key
Application
Up
Alarmp. 42
Down Convertorp. 43
Left
Messagesp. 48
Right
Calendarp. 66
21
Step outside the phone
2. Scroll to an item.
Quickly launch menus by number
Step outside the phone
Send SOS messages
Setting the SOS 1. In Idle mode, press <Menu>
and select Messages → SOS
message
message.
feature
2. Select Yes on the Message
sending field.
3. Select Recipients.
4. Enter the phone numbers to
which you want to send SOS
messages.
5. Press [
settings.
Send SOS
messages
] to save your
In Idle mode, with the phone
closed, press [ / ] 4 times.
The phone will send SOS
messages.
22
Enter text
ABC, T9, Number, and Symbol mode
You can enter text for some features, such as
Messages, Phonebook, or Calendar, using ABC mode,
T9 mode, Number mode, and Symbol mode.
Using ABC mode
Press the appropriate key until the character you want
appears on the display.
Key
Characters in order displayed
Upper case
Lower case
Changing the text input mode
•
•
•
Press the right soft key to change the text input
mode. (
: T9 mode,
: ABC mode,
: Number mode, and
: Symbol mode)
Press and hold [ ] to switch to Symbol mode.
To enter the other languages in the text input
mode, press <Options> and select Language
select.
Or, press and hold the right soft key and select the
language you want.
(Creating an SMS message with GSM-alphabet encoding)
23
Enter text
Tips for using ABC mode
•
•
•
•
•
To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
Press [ ] to change the case. Lower case (No
indicator), Initial capital ( ), and Capital lock ( )
are available.
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
For example, press [4], [3], [5], [5], and [6] to
enter Hello in T9 mode.
24
T9 predicts the word that you are typing, and it
may change with each key that you press.
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices for the keys that you have pressed.
For example, Of and Me use [6] and [3].
4. Press [ ] to insert a space and enter the next
word.
Tips for using T9 mode
•
•
•
•
•
Press [1] to enter periods or apostrophes
automatically.
Press [ ] to change the case. Lower case (No
indicator), Initial capital ( ), and Capital lock ( )
are available.
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Using Symbol mode
This feature may not be available for some languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for your key
presses. When there are no more alternative
words, Spell appears on the bottom line.
3. Press <Spell>.
4. Enter the word you want using ABC mode and
press <OK>.
Symbol mode enables you to insert symbols.
To
Press
display more symbols
[Up] or [Down].
select a symbol
the corresponding
number key.
clear the entered symbols
[C].
insert the symbols
<OK>.
Enter text
Adding a new word to the T9 dictionary
Using Number mode
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you want.
25
Call functions
Advanced calling features
Making a call
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
• Press [C] to clear the last digit or press and hold
[C] to clear the whole display. You can move the
cursor to edit an incorrect digit.
• Press and hold [ ] to enter a pause between
numbers.
Making an international call
1. In Idle mode, press and hold [0]. The + character
appears.
2. Enter the country code, area code, and phone
number, then press [ ].
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
Making a call from Phonebook
Once you have stored a number in Phonebook, you
can dial the number by selecting it from Phonebook.
p. 32
You can also use the speed dial feature to assign your
most frequently called numbers to specific number
keys.p. 34
You can quickly dial a number from the SIM card using
its location number assigned when stored.
1. In Idle mode, enter a location number and press
[ ].
2. Press [Left] or [Right] to scroll through other
numbers.
3. Press <Dial> or [ ] to dial the number you want.
Ending a call
Close the phone or press [
26
].
Using the headset
When you receive an incoming call, the phone rings
and displays the incoming call image.
Use the headset to make or answer calls without
holding the phone.
Press <Accept> or [
Connect the headset to the jack on the left side of the
phone. The button on the headset works as listed
below:
] to answer the call.
Tips for answering a call
•
•
•
•
When Anykey answer is active, you can press
any key, except for <Reject> or [ ].p. 76
When Active folder is active, you can simply open
the phone.p. 76
Press <Reject> or [ ] to reject a call.
Press and hold [ / ] to reject a call or mute the
ringer, depending on the Volume key
setting.p. 76
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
1. Press <View>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
To
Press
redial the last call
the button and then press
and hold it again.
answer a call
and hold the button.
end a call
and hold the button.
Call functions
Answering a call
Options during a call
You can access a number of functions during a call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during a call.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
27
Call functions
Using the Speakerphone feature
Answering a second call
Use the Speakerphone feature to talk and listen with
the phone a short distance away.
1. During a call, press [
] to listen and talk to the
other person hands-free. The
icon appears.
2. Press [
] again to return to normal phone
mode. The
icon appears.
You can answer an incoming call while already on the
phone, if your network supports it and you have
activated the call waiting feature.p. 81
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
3. Press <Opt.> and select End held call to end the
call on hold.
4. To end the current call, press [ ].
Placing a call on hold/Retrieving
Press <Hold> or <Retrieve> to place a call on hold
or retrieve the call.
Making a second call
You can make another call if your network supports it.
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the calls.
4. Press <Opt.> and select End held call to end the
call on hold.
5. To end the current call, press [ ].
28
Using In-call options
Press <Options> to access the following options
during a call:
• Voice clarity on/Voice clarity off: remove
extraneous noise and increase call quality so that
the person with whom you are speaking can hear
you clearly even if you are in a noise place.
If you are using the Speaker feature, you must
first deactivate it in order to use the Voice Clarity
feature.
•
•
To communicate with answering machines or
computerised telephone systems, Send keys
must be selected.
•
•
•
•
Phonebook: access the contact list.
Send DTMF: send the DTMF (Dual tone multifrequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys. This
option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
Message: create and send an SMS message or
access received messages.p. 48
SIM service: access special services, such as
news, weather forecasts, entertainment, and
location services, provided by your SIM card. This
•
•
•
•
•
•
option is available when you use a SIM card
supporting SIM AT menus.
Transfer: transfer the currently active call to a
caller on hold. The two callers can talk to each
other, but you are disconnected from the call.
End held call: disconnect the call currently on
hold.
Join: set up a multi-party call by adding a caller
on hold to a currently active call. You can include
up to 5 people on a multi-party call.
Split: have a private conversation with one multiparty call participant. The other participants can
converse with each other. After the private
conversation, select Join to return to the
multi-party call.
Remove: disconnect one multi-party call
participant.
Switch to headset/Switch to phone: switch the
call to a Bluetooth headset or hands-free car kit or
back to the phone.
Call functions
Mute/Unmute: switch off the phone’s microphone
so that the other person on the phone cannot hear
you, or switch it back on.
Mute keys/Send keys: switch the key tones on
or off.
29
Menu functions
All menu options listed
] to
Using call record options
Recent contacts (Menu 1.1)
While viewing call details, press <Options> to access
the following options:
• Details: show the details of the selected call.
• Call: dial the displayed number.
• Save as contacts: save the number to
Phonebook.
• Send message: send an SMS or MMS message to
the selected number.
• Delete: delete the selected call record or all
records.
This menu displays the most recent calls dialled,
received, or missed.
Missed calls (Menu 1.2)
Call records (Menu 1)
Use this menu to view the calls you have dialled,
received, or missed, and the length of calls. You can
also check the cost of your calls, if your SIM card
supports this function.
To access this menu, press <Menu> in Idle mode and
select Call records.
Accessing a call record
1. Press [Left] or [Right] to move to another call
type.
2. Press [Up] or [Down] to scroll through the call list.
30
3. Press [
] to view the details of a call, or [
dial a number.
This menu displays the most recent calls you did not
answer.
Dialled calls (Menu 1.3)
This menu displays the most recent calls you have
dialled.
Received calls (Menu 1.4)
This menu displays the most recent calls you have
received.
Call time (Menu 1.6)
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
• Last call time: check the length of your last call.
• Total sent: check the total length of all the calls
you have dialled.
• Total received: check the total length of all the
calls you have received.
The password is preset to 00000000. You can
change this password.p. 84
Call costs (Menu 1.7)
This network feature displays the cost of calls. This
menu is available only if supported by your SIM card.
Note that this is not intended to be used for billing
purposes.
• Last call cost: check the cost of your last call.
• Total cost: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set max cost, you must reset the counter before
you can make another call.
• Max cost: check the maximum cost limit set in
Set max cost.
• Reset counters: reset the cost counters.
• Set max cost: set the maximum cost authorised
for your calls.
• Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated.
Call records (Menu 1)
Use this menu to delete all of the records in each call
type.
1. Press [
] to select the call types to be cleared.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Reset timers: reset the call timers. You need to
enter the phone password.
Menu functions
Delete all (Menu 1.5)
•
31
Menu functions
Phonebook
(Menu 2)
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
To access this menu, press <Menu> in Idle mode and
select Phonebook.
Contact list (Menu 2.1)
Use this menu to search for numbers in Phonebook.
•
•
•
•
Send message: send an SMS or MMS message to
the selected number, or an e-mail to the selected
address.
Copy: copy the contact to the phone’s memory, to
the SIM card, or the FDN list.
Send via: send the contact via SMS, MMS, e-mail,
or Bluetooth.
Delete: delete the selected contact.
Print via Bluetooth: print the contact information
by connecting the phone to a printer via Bluetooth.
Finding an entry
FDN list (Menu 2.2)
1. Enter the first few letters of the name that you
want to find.
2. Select the name from the list.
3. Scroll to a number and press [ ] to dial, or press
[
] to edit contact information.
Use this menu to create a list of contacts to be used in
FDN (Fixed Dialling Number) mode, in which the
phone allows outgoing calls only to the specified
phone numbers, if your SIM card supports this
feature. You can activate FDN mode in the FDN mode
menu.p. 85
Using Phonebook options
While viewing contact details, press <Options> to
access the following options:
• Edit: edit contact information.
32
•
Adding a contact
You can access contact options by pressing
<Options> in Contact list.
Add new contact (Menu 2.3)
Use this menu to add a new contact to Phonebook.
Storing a number in the phone’s memory
1. Select Phone.
2. Change the settings or enter information about the
contact.
• First name/Last name: assign a name.
Mobile/Home/Office/Fax/Other: add a
number in any type.
• Email: assign an e-mail address.
• Graphic ID: assign an image to alert you to a
call from the person.
• Alert: assign a ringtone to alert you to a call
from the person.
• Group: assign the contact to a caller group.
• Notes: add a memo about the person.
3. Press <Save> to save the contact.
Phonebook (Menu 2)
Using contact options
•
Menu functions
1. From the FDN list, press <Options> and select
Add.
2. Enter your PIN2 and press <OK>.
3. Enter information about the contact:
• Name: assign a name.
• Phone number: add a number.
• Location: assign a location number.
4. Press <Save>.
Storing a number on the SIM card
1. Select SIM.
2. Enter information about the contact.
• Name: assign a name.
• Phone number: add a number.
• Location: assign a location number.
To assign a caller ID image, ringtone, or group,
the contact must be saved to the phone’s
memory.
3. Press <Save> to save the contact.
33
Menu functions
Group (Menu 2.4)
Speed dial (Menu 2.5)
Use this menu to organise your contacts in caller
groups.
Use this menu to assign a speed dial number (2 to 9)
for 8 of your most frequently called numbers.
Adding members to a caller group
Assigning speed dial numbers
1. Select a group.
2. Press <Options> and select Add → a contact. To
add more contacts, repeat this step.
1. Select a key location from 2 to 9. Key 1 is reserved
for your voicemail server.
2. Select a contact from the contact list.
3. Select a number, if the contact has more than one
number.
Managing caller groups
While viewing the group list, press <Options> to
access the following options:
• View: display the members of the selected group.
• Add: add a new group.
• Edit: change the group properties.
• Send message: send an SMS, MMS, or e-mail
message to the group members you want.
• Delete: delete the selected group. Group
members, however, will not be deleted from
Phonebook.
Managing speed dial entries
From the Speed dial screen, press <Options> to
access the following options:
• Add: assign a number to an unassigned key.
• View: check the name and number assigned to a
key.
• Change: assign a different number to a key.
• Remove: clear the speed dial setting for a key.
Dialling speed dial entries
In Idle mode, press and hold the appropriate key.
34
Own number (Menu 2.7)
Use this menu to create a name card and send it to
other people.
Use this menu to check your phone numbers, or to
assign a name to each of the numbers. Changes made
here do not affect the actual subscriber numbers on
your SIM card.
Saving your name card
The procedure for creating your name card is the
same as the one for saving a phone number in the
phone’s memory.p. 33
Using name card options
Management (Menu 2.8)
Use this menu to manage Phonebook entries.
• Default saving: select a default memory location
for saving contacts. If you select Ask on saving,
the phone will ask you to select a memory location
each time you save a number.
• Copy all to phone: copy all of the contacts stored
on the SIM card to the phone’s memory.
• Sort by contacts: sort your contacts by the first
name or last name.
• Delete all: delete all of the contacts from your
phone’s memory, your SIM card, or the FDN list.
• Memory status: check the number of contacts
you have stored in the phone’s memory and on the
SIM card.
Phonebook (Menu 2)
After saving your name card, press <Options> to
access the following options:
• Edit: edit the name card.
• Send via: send the name card via SMS, MMS,
e-mail, or Bluetooth.
• Exchange namecard: exchange name cards with
another person via Bluetooth.
• Remove: delete the name card.
• Print via Bluetooth: print the name card
information by connecting the phone to a printer
via Bluetooth.
Menu functions
My name card (Menu 2.6)
35
Menu functions
Service number (Menu 2.9)
Downloading or receiving music files
Use this menu to view the list of Service Dialling
Numbers (SDN) assigned by your service provider,
including emergency numbers and numbers for
directory enquiries. This menu is available if your SIM
card supports SDN.
1. Scroll to the number you want and press <View>.
2. Press <Dial> or [ ].
Use these methods to save music files to your phone’s
memory:
• Download from a computer using the optional
Samsung PC StudioSamsung PC Studio User’s
Guide
• Via an active Bluetooth connectionp. 84
Applications
Creating a play list
(Menu 3)
Use this menu to play Java games or play music files.
You can also use convenient features, such as a voice
recorder, alarm clock, calculator, convertor, stopwatch,
and FM radio.
To access this menu, press <Menu> in Idle mode and
select Applications.
MP3 player (Menu 3.1)
Use this menu to enjoy music. First, you need to save
music files into your phone’s memory.
36
The downloaded or received files are stored in the
Music folder.p. 64
1. From the MP3 player screen, press <Options>
and select Add to list.
2. Select either of the following options:
• Add all: add all of the files in the phone’s
memory to the play list.
• Add a file: add a specific file to the play list.
3. If you selected Add a file, press [
] to check
the files to be added and press <Add>.
4. Press <Back> to return to the MP3 player screen.
Playing music files
From the MP3 player screen, press [
Using MP3 player options
].
During playback, use the following keys:
Left
Moves back to the previous file. Moves
backward in a file when pressed and held.
Right
Skips to the next file. Skips forward in a
file when pressed and held.
Pauses or resumes playback.
Up
Opens the play list.
Down
Stops playback.
/
Adjusts the volume level.
2
Changes the playback animation.
3
Changes the repeat mode.
6
Turns Shuffle mode on or off.
Applications (Menu 3)
Function
Menu functions
Key
From the MP3 player screen, press <Options> to
access the following options:
• Play/Pause: begin or pause playback.
• Send via: send the current file via e-mail or
Bluetooth.
• Open play list: access the play list.
• Set as: set the file as your ringtone, as a ringtone
for a Phonebook entry, or as an alarm melody.
• Remove from play list: remove the selected file.
• Settings: change the default settings for playing
music files.
Repeat mode: select a repeat mode.
Shuffle: set the MP3 player to play music at
random.
Visualization: change the playback animation.
Volume: select a volume level.
• Properties: access the file properties.
37
Menu functions
Accessing the play list
From the MP3 player screen, press [Up].
Press <Options> to access the following options:
• Play: play the currently selected file.
• Add to list: add files to the play list.
• Move list: move the selected file to the position
you want within the play list.
• Remove: remove the selected file or all files from
the play list.
Playing MP3 files with the phone closed
Press and hold [
] and then [ ] to launch the
MP3 player. Use the following keys to control the MP3
player:
Key
Function
Begins or pauses playback.
Moves back to the previous file. Moves
backward in a file when pressed and held.
Skips to the next file. Skips forward in a
file when pressed and held.
38
Key
/
Function
Adjusts the volume.
Locks the exposed keys when pressed and
held to keep accidental presses from
affecting playback.
•
•
: keys locked
: keys unlocked
Voice recorder (Menu 3.2)
Use this menu to record voice memos. A voice memo
can be up to one hour long.
Recording a voice memo
1. Press [
] to start recording.
2. Speak into the microphone.
Press [
] to pause or resume recording.
3. Press <Save> or [Down] to end recording. The
voice memo is saved automatically.
4. Press [
] to review the voice memo, or [Up] to
record a new memo.
Playing a voice memo
During playback, use the following keys:
Key
Left
/
Down
Default name: change the default prefix of the
voice memo.
Java world (Menu 3.3)
Use this menu to access the embedded Java games
and downloaded Java applications.
Function
Accessing an embedded game
Pauses or resumes playback.
Moves backward in a memo.
1. From the Java world screen, select Downloads.
2. Select a game.
Moves forward in a memo.
Using Java game options
Adjusts the volume.
From the Java world screen, select Downloads and
press <Options> to access the following options:
• Launch: launch the selected game.
• Application settings: set a game to be continued
when a call comes in or an alarm sounds during
the game. You can also set the phone to exchange
game information with the network while playing
an online game or when you need to connect to
the Internet.
• Delete: delete the selected game.
• Properties: access the game properties.
Stops playback.
Changing the voice recorder settings
You can change the recording settings for the recorder.
Before recording a memo, press <Options> and
select Settings to access the following options:
• Recording time: select a recording time.
• Volume: select a volume level.
Applications (Menu 3)
Right
•
Menu functions
1. From the Voice recorder screen, press <Options>
and select Go to voice list.
2. Select a voice memo.
39
Menu functions
40
Configuring Java settings
Checking memory status
You can configure profile settings for accessing Java
services.
1. From the Java world screen, select Settings.
2. Change the following settings:
• APN: enter the access point name.
• Login ID: enter the user ID.
• Password: enter the password.
• Proxy: select whether or not you use a proxy
server to access network services. Depending
on this setting, options in Proxy settings vary.
• Proxy settings: provide you with the following
options:
When the proxy is set to Enable:
IP address: enter the HTTP proxy IP address.
Port: enter the proxy port number.
When the proxy is set to Disable:
DNS1: enter the primary address.
DNS2: enter the secondary address.
You can view the total amount of memory for the
games as well as the amount of used memory.
From the Java world screen, select Memory status.
FM radio (Menu 3.4)
Use this menu to access the FM radio on your phone.
First, you must connect your phone with the headset,
which serves as a radio antenna.
Finding and setting radio channels
1. Press [
] to turn on the radio.
2. Press [Left] or [Right] to move to the frequency of
a radio channel.
The frequency moves by 0.1 MHz increments.
Otherwise, press and hold [Left] or [Right] to
automatically scan through and save available
radio frequencies.
3. Press <Options> and select Add.
4. Enter a name for the channel and press [
].
•
Listening to the radio
1. From the FM radio screen, scroll to a radio channel.
2. Press [
] to turn on the radio.
Press [ / ] to adjust the volume.
•
3. To turn off the radio, press [
].
Using radio options
On the FM radio screen, press <Options> to access
the following radio options:
• FM radio on/FM radio off: turn the radio on or
off.
• Add: add a radio channel. You can store up to 30
channels.
• Edit: edit the name or frequency for the channel.
•
•
Applications (Menu 3)
• You can answer an incoming call or use other
phone functions while listening to the radio.
• The quality of the radio broadcast depends on
the radio station’s coverage in that particular
area.
•
Self-tuning: let the phone automatically scan
through and save available radio frequencies.
Remove: remove the selected channel or all
channels.
Pop-up alert: set the phone to alert you to listen
to the radio at a specific time. When the pop-up
notification appears on the screen, press <Listen>
to turn on the specified radio channel.
Speaker on/Earphone on: change the audio
mode to the phone’s speaker or headset.
Settings: select the radio volume.
Menu functions
5. Select the channel number to be assigned to the
frequency.
Listening to the radio with the phone closed
1. Press and hold [
] and then [
] to access
the radio.
2. Select a channel or frequency by pressing [
] or
[
] and press [
] to turn on the radio.
Press [ / ] to adjust the volume.
3. Press and hold [
] to turn off the radio.
41
Menu functions
World time (Menu 3.5)
Alarm (Menu 3.6)
Use this menu to set your local time zone and find out
what time it is in another part of the world.
Use this menu to set alarms. The alert type for a
normal alarm corresponds to the call alert type
settings. A wake-up alarm is not affected by your
sound settings.
Setting your local time zone
1. From the world map, press [Left] or [Right] to
scroll to the city you want. As the time line moves,
the time and date of the given zone display.
2. Press [
] to save the city as your local time
zone.
Viewing and setting a foreign time zone
1. From the world map, press [Down].
2. Press [Left] or [Right] to select the foreign time
zone you want.
3. Press [
] to save the time zone.
Applying daylight savings time
1. From the world map, press <Options> and select
Set daylight saving time.
2. Press [
] to select the time zones you want.
3. Press <Save>.
42
Setting an alarm
1. Select the type of alarm.
2. Set each alarm option:
• Alarm: activate the alarm.
• Alarm time: enter the time for the alarm to
ring.
• AM/PM: set AM or PM in 12-hour format.
• Alarm day: select the days you want.
• Alarm tone: select an alarm tone.
3. Press <Save>.
Stopping an alarm
•
•
For a non-wake-up alarm, press any key.
For a wake-up alarm, press <OK> or [
].
Press any key, except <OK> and [
], to cause
it to sound again after 5 minutes. You can do this a
maximum of 5 times.
Setting the alarm to ring even if the phone is
off
From the Alarm screen, select Auto power → On.
Calculator (Menu 3.7)
Performing a conversion
1. Select a convertor.
2. Press [Left] or [Right] to select the original unit
and press [Down].
3. Enter the value to be converted and press [Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to above
zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit to which
you want to convert.
The equivalent value for the amount you entered
displays.
Applications (Menu 3)
Use this menu to perform basic arithmetic functions,
such as addition, subtraction, multiplication, and
division.
1. Enter the first number.
• Press <.()> to insert a decimal point or
bracket.
• Press [ ] or [ ] to move the cursor.
2. Press one of the Navigation keys to access the
math function you want.
3. Enter the second number.
4. Press [
] to view the result.
5. If necessary, repeat from step 2 to continue the
calculation.
Use this menu for common conversions, such as
currency and temperature.
Menu functions
If the phone is off when it is time for the alarm to ring,
the phone switches on and sounds the alarm.
Convertor (Menu 3.8)
Using convertor options
Press <Options> to access the following options:
• Clear: clear the current values.
• Reverse: reverse the conversion.
• Currency rates: edit the currency rate list.
43
Menu functions
Timer (Menu 3.9)
SIM AT (Menu 3.11)
Use this menu to set a period of time for the phone to
count down. The phone will sound an alarm when the
specified period of time has expired.
This menu is available if you use a SIM AT card that
supports SIM Application Tool kit menus and provides
additional services, such as news, weather, sports,
entertainment, and location services. Available
services may vary, depending on your service
provider’s plans. For details, see your SIM card
instructions or contact your service provider.
Starting the timer
1. Press <Set>.
2. Enter the length of time you want to count down
and press <OK>.
3. Press [
] to start counting down.
Stopping the timer
•
•
Press any key when the timer rings.
Press [
] on the Timer screen to stop the timer
before it rings.
Stopwatch (Menu 3.10)
Use this menu to measure elapsed time. The
maximum time is 10 hours.
1. Press [
] to start the stopwatch.
2. Press [
] to check an interval. You can repeat
this step for a total of 4 intervals.
44
Browser
(Menu 4)
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
From the wireless web, you can access up-to-date
information and a wide variety of media content, such
as games, wallpapers, ringtones, and music files.
To access this menu, press <Menu> in Idle mode and
select Browser.
•
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider. You can also press [
] in Idle mode.
•
Navigating the web browser
•
Press
scroll through browser
items
[Up] or [Down].
select a browser item
[
return to the previous
page
<Back> or [C].
return to the homepage
and hold [C].
] or <
>.
Using browser menu options
Press [ ] or select
on the top of screen.
• Back: go back to the previous page.
• Home: return to the homepage.
• Exit: exit the web browser.
Using web page options
From any web page, press [ ] to access the following
options:
• Go to URL: enter a URL address manually.
• Bookmarks: switch to the Bookmarks menu.
p. 46
• Messages: check the messages stored in the My
Messages folder. You can also create and send a
new SMS message.p. 48
• File manager: switch to the File manager
menu.p. 62
Browser (Menu 4)
To
Reload: reload the current page with updated
information.
Show URL: display the URL address of the current
web page. You can also set the current page as the
homepage for the web browser.
About...: access version and copyright information
about the browser.
Menu functions
Home (Menu 4.1)
Exiting the browser
Press [ ] to end the network connection and exit the
browser.
45
Menu functions
Bookmarks (Menu 4.2)
Go to URL (Menu 4.3)
Use this menu to save URL addresses in order to
quickly access web pages.
Use this menu to manually enter a URL address and
access the associated web page.
Adding a bookmark
Clear cache (Menu 4.4)
1. Select an empty location.
2. Enter a title for the bookmark and press [Down].
3. Enter a URL address and press [
].
Accessing a bookmarked page
Selecting a bookmark item launches the web browser
and accesses the associated web page.
Using bookmark options
After saving an item, press <Options> to access the
following options:
• Go: access the bookmarked web page.
• Edit: edit the URL address and title of the
bookmark.
• Delete: delete the selected bookmark.
46
Use this menu to clear information stored in the cache,
which is the temporary memory that stores the web
pages you have recently accessed.
Profile settings (Menu 4.5)
Use this menu to set up servers for the web browser.
Contact your service provider for details about your
setting options.
For each server, the following options are available:
• Profile name: assign a name to the server profile.
• Home URL: set the address of your homepage.
• Bearer: select a bearer for each type of network
address accessed.
•
•
Current profile (Menu 4.6)
Use this menu to select a connection profile for
accessing the web browser.
47
Browser (Menu 4)
GSM settings: customise the following GSM
network settings:
When the proxy is set to Enable:
Proxy IP: enter the proxy IP address.
Proxy port: enter the proxy port number.
Dial number: enter the PPP server phone number.
Login ID: enter the user ID.
Password: enter the password.
Data call type: select a data call type.
When the proxy is set to Disable:
DNS1: enter the primary address.
DNS2: enter the secondary address.
Dial number: enter the PPP server phone number.
Login ID: enter the user ID.
Password: enter the password.
Data call type: select a data call type.
Menu functions
•
Proxy: select whether or not the phone uses a
proxy server to launch the web browser. Your
service provider can tell you if your network
requires a proxy server, and they can give you the
appropriate settings.
GPRS settings: customise the following GPRS
network settings:
When the proxy is set to Enable:
Proxy IP: enter the proxy IP address.
Proxy port: enter the proxy port number.
APN: enter the access point name of the GPRS
network gateway.
Login ID: enter the user ID.
Password: enter the password.
When the proxy is set to Disable:
DNS1: enter the primary address.
DNS2: enter the secondary address.
APN: enter the access point name of the GPRS
network gateway.
Login ID: enter the user ID.
Password: enter the password.
Menu functions
Messages (Menu 5)
Use the Messages menu to send and receive text
messages, multimedia messages, and e-mails. You
can also use push message and cell broadcast
message features.
To access this menu, press <Menu> in Idle mode and
select Messages.
Create new message (Menu 5.1)
Use this menu to create and send messages.
Text message (Menu 5.1.1)
Short Message Service (SMS) allows you to send or
receive text messages that may include simple
pictures, animated images, and melodies.
1. Enter your message.
The maximum number of characters allowed in a
message varies by service provider. If your
message exceeds the maximum number of
characters, the phone will split the message.
48
2. Press <Options> to access the following options
for creating a message:
• Insert: add a template, Phonebook entry, or
bookmark to text.
• Add picture/Add animation/Add melody:
attach a simple image, animated image, or
melody.
• Attach: attach a Phonebook entry as a name
card or calender data as a data format
attachment.
• Text style: change the text attributes.
3. When you have finished, press <Options> and
select Save and send or Send only.
4. Enter a destination number.
To send the message to more than one recipient,
fill in additional destination fields.
5. Press [
] to send the message.
Multimedia message (Menu 5.1.2)
4. Select the Message line.
5. Enter the message text and press [
].
6. Press <Options> to access the following options
for editing the message:
• Edit: edit the subject or text of your message.
• Change image/Change video/Change
sound: replace an added item.
Messages (Menu 5)
• The maximum size allowed for a message can
differ, depending on your service provider.
• Depending on the file type or DRM (Digital
Rights Management) system, some files may
not be able to be forwarded.
Add page: add pages. Move to each page by
pressing [Left] or [Right] on the message
screen.
• Delete page: delete an added page.
• Edit page: change the duration of page display
or move the page forward among the other
pages.
• Attach: attach a Phonebook entry as a name
card or calender data as a data format
attachment.
• Remove subject/Remove media/Remove
sound/Remove message: remove an added
item.
7. When you have finished, press <Options> and
select Send.
8. Enter a phone number or e-mail address.
To send the message to more than one recipient,
fill in additional destination fields.
9. Press [
] to send the message.
•
Menu functions
Multimedia Message Service (MMS) delivers messages
containing a combination of text, image, video, and
audio, from phone to phone or from phone to e-mail.
1. Select the Subject line.
2. Enter the message subject and press [
].
3. Select the Picture & Video or Sound line and add
an image, a video, or a sound file.
49
Menu functions
Email (Menu 5.1.3)
You can create and send e-mails that include text,
audio, and images. To use this feature, you need to
subscribe to an e-mail service and set up your e-mail
account and profile.p. 59
1. Select the Subject line.
2. Enter the subject of your e-mail and press [
].
3. Select the Message line.
4. Enter the e-mail text and press [
].
5. Select the File attach line and select one of the
following options to add files:
• Add image/Add videos/Add sounds/Add
music: add media files stored in the phone’s
memory.
Depending on the file type or DRM (Digital
Rights Management) system, some files may
not be able to be forwarded.
•
•
50
Other files: add document files stored in the
Other files folder.
Attach: attach name cards or calender data as
data format attachments.
6. Press <Options> to access the following options
to edit the e-mail:
• Edit: edit the subject or text.
• Remove subject/Remove message: clear
the subject or text.
• Remove: delete the selected attachment or all
attachments.
• Remove all attachments: delete all
attachments.
7. When you have finished, press <Options> and
select Send.
8. Enter an e-mail address.
To send the e-mail to more than one recipient, fill
in additional destination fields.
9. Press [
] to send the e-mail.
My messages (Menu 5.2)
Use this menu to access messages you have received,
sent, or which have failed in sending.
This folder stores all of the messages you have
received, except for e-mails.
Viewing a message
While viewing a message, press <Options> to access
the following options:
SMS messages
• Reply via: reply to the sender via SMS or MMS.
• Forward: forward the message to other people.
• Delete: delete the message.
• Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
• Add to block list: add the sender’s number to the
Block list to reject the messages from the sender.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Cut media: save media content from the message
to your phone’s memory.
51
Messages (Menu 5)
The following icons may appear on the message list to
show the message type:
•
SMS or delivery report for your sent messages
•
MMS
•
MMS notification ( : Being retrieved,
: Failed to retrieve)
•
Push message from web servers.
•
Configuration message, containing network
parameters from your service provider.
Using message options
Menu functions
Inbox (Menu 5.2.1)
• Depending on the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
• A ! icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
Menu functions
•
•
Print via Bluetooth: print the message by
connecting the phone to a printer via Bluetooth.
Protection: protect the message from being
deleted.
MMS messages/MMS notifications
• Retrieve: retrieve the MMS message from the
MMS server.
• Reply via SMS: reply to the sender via SMS.
• Reply via MMS to: reply to the sender or all
recipients via MMS.
• Forward: forward the message to other people.
• Delete: delete the message.
• Add to block list: add the sender’s number to the
Block list to reject the messages from the sender.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Cut media: save media content from the message
to your phone’s memory.
• Properties: access the message properties.
52
Delivery reports
• Delete: delete the report.
Configuration messages
• Install: apply the configuration specified in the
message to your phone.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
• Protection: protect the message from being
deleted.
Push messages
• Go to URL: connect to the URL specified in the
message.
• Delete: delete the message.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Drafts (Menu 5.2.2)
This folder stores messages you have saved to send at
a later time.
When you select an SMS or e-mail message, it opens
in Edit mode so that you can edit and/or send the
message.
When you select an MMS message, it opens in Preview
mode as would a message from the Inbox. To edit the
MMS message, press <Options> and select Edit.
This folder stores messages that the phone is
attempting to send or has failed to send.
While viewing a message, press <Options> to access
the following options:
• Open file: open the attached file.
• Save file: save the attached file in the phone’s
memory.
• Send again: retry sending the message.
• Forward: forward the message to other people.
•
•
Sentbox (Menu 5.2.4)
Messages (Menu 5)
The following icons are available to show the message
status:
•
SMS message failed to send
•
MMS message being sent
•
MMS message failed to send
•
E-mail being sent
•
E-mail failed to send
•
Delete: delete the message.
Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
Protection: protect the message from being
deleted.
Print via Bluetooth: print the message by
connecting the phone to a printer via Bluetooth.
Properties: access the message properties.
Menu functions
Outbox (Menu 5.2.3)
•
•
This folder stores messages that you have sent.
While viewing a message, press <Options> to access
the following options:
• Open file: open the attached file.
• Save file: save the attached file in the phone’s
memory.
• Forward: forward the message to other people.
• Delete: delete the message.
• Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
53
Menu functions
•
•
Print via Bluetooth: print the message by
connecting the phone to a printer via Bluetooth.
Properties: access the message properties.
Email box (Menu 5.2.5)
This folder stores e-mails that you have received.
Viewing an e-mail
1. Select an e-mail account.
2. Press <Select> when Check new mail displays.
The phone checks the e-mail server and downloads
new e-mails.
The following icons may appear on the list to show
the e-mail status:
•
Retrieved from the server
•
Being retrieved
•
Failed to retrieve.
A ! icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
54
3. Select an e-mail or a header.
4. Press [ / ] to view other pages in the
e-mail.
Press and hold [ / ] to move to the first or last
page in the e-mail.
5. Press [ ] or [ ] to view the previous or next
e-mail.
Using e-mail options
While viewing the e-mail or header, press <Options>
to access the following options:
• Retrieve: retrieve the body of the e-mail from the
e-mail server.
• Open file: open the attached file.
• Save file: save the attached file in the phone’s
memory.
• Reply to: send a reply to the sender or to the
sender and all of the other recipients.
• Forward: forward the e-mail to other people.
• Delete: delete the e-mail.
• Add to block list: add the sender’s e-mail
address or subject to the Block list to reject
e-mails from that address or containing that
subject.
•
•
•
•
My folder (Menu 5.2.6)
Templates (Menu 5.3)
Use this menu to make and use templates of
frequently used messages.
Text template (Menu 5.3.1)
You can create SMS templates with the sentences you
use frequently so that you can retrieve and insert
them when composing an SMS, MMS, or e-mail
message.
].
Using template options
From the template list, press <Options> to access
the following options:
• Edit: edit the selected template.
• Send message: create and send a new message.
• Delete: delete the selected template.
Messages (Menu 5)
Use this menu to view the messages you have moved
to this folder using the Move to my folder option
while viewing a message list.
Creating a template
1. Select an empty location.
2. Enter a message and press [
Menu functions
•
Cut address: extract URLs, e-mail addresses, or
phone numbers from the e-mail.
Cut attachment: save the attached files from the
e-mail to your phone’s memory.
Print via Bluetooth: print the e-mail by
connecting the phone to a printer via Bluetooth.
Protection: protect the e-mail from being deleted.
Properties: access the e-mail properties.
MMS template (Menu 5.3.2)
You can access embedded MMS templates or ones you
have saved so that you can use them in composing an
MMS message.
From the template list, press <Options> to access
the following options:
• View: open the selected template.
• Send message: send the selected message.
• Edit: edit the selected template.
• Add new: add a new template.
55
Menu functions
•
Delete: delete the selected template or all
templates, except for the embedded ones.
Delete all (Menu 5.4)
Use this menu to delete messages in each message
folder all at once.
1. Press [
] to select the message folders to be
cleared.
Pressing the key twice displays the message types
so that you can specify the ones to be cleared.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Settings (Menu 5.5)
Use this menu to set up various options for using the
messaging service.
Text message (Menu 5.5.1)
You can configure SMS settings.
• Send settings: set up the options for sending
SMS messages:
56
•
Reply path: allow recipients to reply to you
through your SMS server.
Delivery report: set the network to inform you
when your messages have been delivered.
Validity period: set the length of time your
messages are stored in the SMS server.
Message type: set the default message type. The
network can convert the messages into the
selected format.
Service centre: store or change the number of
your SMS server.
Block number: store the phone numbers from
which you want to reject messages.
Multimedia message (Menu 5.5.2)
You can configure MMS settings.
• Send settings: set up the options for sending
MMS messages:
Delivery report: set the network to inform you
when your messages have been delivered.
Address hiding: set your address to be hidden
from the recipient’s phone.
Messages (Menu 5)
•
Roaming reception: determine if your phone
retrieves new messages automatically when you
are roaming on another network.
Reception within home network or abroad has the
following options:
- Automatic: the phone automatically retrieves
messages from the server.
- Reject: the phone rejects all messages.
- Manual: the phone displays notifications. Use
the Retrieve option to manually download new
messages.
MMS profiles: configure required network
settings for MMS.
Current profile: select a profile.
Profile settings: customise the options for each
profile:
- Profile name: assign a name to the MMS profile.
- Server URL: enter the address of your MMS
server.
- Proxy: connect to the GPRS network using the
proxy server.
Menu functions
•
Read reply: send a read-reply request along with
your messages.
Priority: set the priority level of messages.
Expiry Date: set the length of time messages are
stored in the MMS server.
Delivery after: set a time delay before messages
are sent.
Send size: select a maximum size of attached
items allowed for messages.
Receive settings: set up the options for receiving
MMS messages:
Anonymous reject: reject messages from
unknown senders.
Advert allowed: accept advertisements.
Report allowed: set the network to inform the
sender when a message has been delivered to you.
Home reception: determine if your phone
retrieves new messages automatically when you
are in your home service area.
57
Menu functions
- GPRS settings: customise the settings required
for connecting to the GPRS network.
when the proxy is set to Enable:
IP address: enter the gateway address.
Port: enter the port number.
APN: enter the access point name used for the
address of the GPRS network.
Login ID: enter the user ID.
Password: enter the password.
when the proxy is set to Disable:
DNS1: enter the primary address.
DNS2: enter the secondary address.
APN: enter the access point name used for the
address of the GPRS network.
Login ID: enter the user ID.
Password: enter the password.
58
- Version: select an available OMA version and
maximum size limit for sending or receiving
messages.
Depending on your service provider, it may not
be possible to support the maximum limit
295KB. In this case, try again after changing
the setting to 100KB.
•
Block number: set the Block number list to reject
MMS messages from specific phone numbers.
Email (Menu 5.5.3)
You can configure default e-mail settings.
You cannot change e-mail profile and account
settings while an e-mail is being sent or retrieved.
•
Send settings: set up the options for sending
e-mails:
Send copy to self: send a copy of your e-mails to
your e-mail account.
Delivery confirm: set the network to inform you
when your e-mails have been delivered.
Messages (Menu 5)
•
Retrieve option: set whether the phone
downloads e-mail headers only or e-mail headers
and bodies both.
Delete option: determine whether e-mails are
deleted immediately or the next time you connect
to the server.
Reject if over: determine the maximum size for
incoming e-mails. Your phone will reject
e-mails that exceed the specified size.
Leave a copy of messages on the server: leave
copies of e-mails on the e-mail server after
retrieving.
Email account: set up an e-mail account and
select an account to be used.
Current account: select an account.
Account settings: configure e-mail accounts
using different e-mail servers. Set the options for
each account:
- In use: select this option to use the account and
to display the account in the Email box folder.
Menu functions
•
Read confirm: send a read-reply request along
with e-mails.
Priority: select the priority level of e-mails.
Include signature: attach your name, phone
number or a simple memo to your e-mails.
Edit name: edit the name in your signature.
Edit telephone number: edit the phone number
in your signature.
Edit note: edit the tag line in your signature.
Receive settings: set up the options for receiving
e-mails:
Check interval: determine how often the phone
checks the server for incoming e-mails. If you
select Not used, use the Check new mail feature
to receive new e-mails manually.
Read reply: determine whether or not the phone
sends a read-reply for incoming e-mails. If you
select Announce, the phone asks you to send a
read-reply.
59
Menu functions
- Account name: enter a name for the currently
selected account.
- User name: enter a user name.
- Email address: enter your e-mail address.
- Reply address: enter your e-mil address to be
used when the recipient sends a reply.
- User ID: enter your e-mail ID.
- Password: enter your e-mail password.
- SMTP server: enter the IP address or host name
of the outgoing e-mail server.
- SMTP port: enter the SMTP port number.
- Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
When the protocol type is POP3:
- POP3 server: enter the IP address or host name
of the server that receives your e-mail.
- POP3 port: enter the POP3 port number.
- APOP login: connect to the server by using the
APOP login scheme.
60
•
When the protocol type is IMAP4:
- IMAP4 server: enter the IP address or host
name of the server that receives your e-mail.
- IMAP4 port: enter the IMAP4 port number.
- Include attachments: select this option to
receive attachments with e-mails.
- Max. Emails retrieved: set the number of
headers you will retrieve from the server.
Email profile: select a connection profile to be
used for e-mail services.
You cannot change e-mail profile settings while an
e-mail is being sent or retrieved.
Current profile: select a profile.
Profile settings: configure up to five e-mail
profiles. For each profile, the options are required
to connect to the GPRS network:
- Profile name: enter a name for the e-mail
profile.
- APN: enter the access point name used for the
GPRS network address.
Push message (Menu 5.5.4)
While the phone is attempting to send an SOS
message, the ( ) icon turns red and you
cannot access menu functions. When the icon
turns blue, use the phone as normal.
•
•
•
SOS message (Menu 5.6)
In an emergency, you can send SOS messages to your
family or friends for help. You can also receive SOS
messages from other people who are in an emergency.
Use this menu to specify options for sending and
receiving SOS messages.
Message sending: activate or deactivate the SOS
message feature. To send an SOS message, press
[ / ] 4 times in Idle mode, with the phone closed.
•
Recipients: specify the phone numbers to which
you want to send SOS messages.
Repeat sending: set the number of times the
phone repeats sending SOS messages.
Incoming SOS alert: set whether or not the
phone uses the preset alert type (siren and alert
message) for incoming SOS messages. If you
select No, the phone uses the message ringer
setting.
Text: check the preset SOS message text.
Messages (Menu 5)
You can change the settings for receiving push
messages from the wireless web server.
• Receive: set how your phone receives push
messages.
• Service centre: enter the address of the server
from which you want to receive push messages.
•
Menu functions
•
- Login ID: enter the user ID.
- Password: enter the password.
- DNS1: enter the primary address.
- DNS2: enter the secondary address.
Block list: specify e-mail addresses or subjects
you want to reject.
You can view the onscreen help by pressing
<Options> and selecting Help.
61
Menu functions
Broadcast messages (Menu 5.7)
Memory status (Menu 5.8)
The Cell Broadcast service delivers short messages on
various topics, such as weather, sports, or traffic.
Use this menu to view the amount of memory
currently in use in each folder.
Use this menu to change the settings for the service
and to access broadcast messages.
• Read: open received messages.
The Temporary box saves network messages until
the phone is switched off.
The Archive box saves network messages
indefinitely. Press <Options> and select Save to
save messages to the Archive box when a text
notification appears.
• Receive: enable or disable the reception of
broadcast messages.
• Channel: specify the channels from which you
receive broadcast messages.
When you select Respective channels, you can
set up a list of active CB channels.
• Language: select the language(s) in which
broadcast messages display.
Please contact your service provider for details.
62
File manager (Menu 6)
The File manager menu allows you to access images,
videos, music files, and sound files stored in the
phone’s memory.
To access this menu, press <Menu> in Idle mode and
select File manager.
As a result of the Digital Rights Management (DRM)
system, some of the media items you download from
the Internet or receive by MMS may require a license
key to access them.
Images (Menu 6.1)
This menu displays photos you have taken and images
you have downloaded, received in messages, or
imported from your computer.
Viewing an image
1. Select an image folder.
2. Select an image.
Viewing a slide show
While viewing an image, press <Options> to access
the following options:
• List: return to the image list.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the image as wallpaper for the displays
or as a caller ID image for a Phonebook entry.
• Edit: decorate the photo by adding emoticons or
applying a frame or special effect.
• Delete: delete the file.
•
•
•
File manager (Menu 6)
Using image options
•
Rename: change the file name.
Move to favourite images/Move to: move the
file to another folder.
Share for Bluetooth: share the file or all files
with other Bluetooth devices.
Print via Bluetooth: print the image by
connecting the phone to a printer via Bluetooth.
Protection: protect the file from being deleted.
Properties: access the file properties.
Menu functions
You can view your photos as a slide show, a sequential
presentation of each photo in the current folder.
1. Select Photos.
2. Press <Options> and select Slide show.
3. Select an interval option.
The slide show begins.
4. Press <Cancel> to stop the slide show.
•
•
Videos (Menu 6.2)
This menu displays video clips you have recorded,
downloaded, received in messages, or imported from
your computer.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
Playing a video clip
1. Select a video folder.
2. Select a video clip.
63
Menu functions
During playback, use the following keys:
Key
Function
Pauses or resumes playback.
Left
Moves backward in a file.
Right
Skips forward in a file.
/
Down
•
•
Share for Bluetooth: share the file with other
Bluetooth devices.
Protection: protect the file from being deleted.
Properties: access the file properties.
Music (Menu 6.3)
Adjusts the volume.
This menu displays MP3 files you have downloaded or
imported from your computer.
Stops playback.
Select a file. The MP3 player opens.p. 37
Using video options
From a video screen, press < > to access the
following options:
• Play: play the file.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Delete: delete the file.
• Rename: change the file name.
• Move to favourite videos/Move to: move the
file to another folder.
64
•
Sounds (Menu 6.4)
This menu displays voice memos you have recorded,
and sound files you have downloaded, received in
messages, or imported from your computer.
Playing a sound clip
1. Select a sound folder.
2. Select a sound clip. For a voice memo, see Voice
recorder. p. 39
Other files (Menu 6.5)
From a sound screen, press <Options> to access the
following options:
• List: return to the sound list.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the sound as your call ringtone, a
ringtone for a Phonebook entry, or alarm melody.
• Delete: delete the file.
• Rename: change the file name.
• Move to favourite sounds/Move to
downloaded sounds: move the file to another
folder.
• Share for Bluetooth: share the file with other
Bluetooth devices.
• Protection: protect the file from being deleted.
• Properties: access the file properties.
Files that you have received but which are not
supported by your phone are stored in this folder. You
cannot open these files on the phone. Unsupported file
formats include *.doc, *.ppt, and *.txt.
Menu functions
Using sound options
Memory status (Menu 6.6)
Use this menu to view memory information for media
items in the phone’s memory.
Calendar (Menu 7)
Calendar (Menu 7)
The Calendar menu enables you to keep track of your
schedule.
To access this menu, press <Menu> in Idle mode and
select Calendar.
Consulting the calendar
When you enter the Calendar menu, the calendar in
Month view appears with today’s date indicated by a
blue box.
65
Menu functions
Selecting a day
Creating an event
•
•
•
You can store scheduled events, anniversaries,
miscellaneous events, and To do items on the
calendar. More than one event per day can be stored.
Press [Left] or [Right] to move by day.
Press [Up] or [Down] to move by week.
Press [ / ] to move by month.
Using calendar options
Press <Options> to access the following options:
• View mode: change the view mode of the
calendar.p. 68
• Create: add a new event.next section
• Go to: select today’s date or enter a specific date.
• Sort by: sort items by type of event.
• Delete: delete the items stored on the calendar by
using various deleting options.
• Missed alarm events: view events whose alarms
you have missed.
• Memory status: access memory information for
the event items stored on the calendar.
66
Entering a new scheduled event
1. Select a date on the calendar.
2. Press <Options> and select Create → Schedule
or Miscellaneous.
3. Enter information or change the settings:
• Subject: enter a title for the event.
• Details: enter event details.
• Start date and Start time: enter the starting
date and time for the event.
• AM/PM: select AM or PM in 12-hour time
format.
• End date and End time: enter the ending date
and time for the event.
• AM/PM: select AM or PM in 12-hour time
format.
• Location: (for Schedule) enter information
about the event location.
•
•
1. Select a date on the calendar.
2. Press <Options> and select Create →
Anniversary.
3. Enter information or change the settings:
• Occasion: enter information about the
anniversary.
• Date: enter the date.
• Alarm: select to set an alarm for the
anniversary.
• before: set how long before the event the
alarm is to alert you.
Alarm time: enter the time for the alarm to
ring.
• AM/PM: select AM or PM in 12-hour time
format.
• Alarm tone: select an alarm tone.
• Repeat every year: set the phone to remind
you of the anniversary every year.
4. Press <Save> to save the event.
Entering a To do item
1. Select a date on the calendar.
2. Press <Options> and select Create → To do.
3. Enter information or change the settings:
• To do: enter information about the item.
• Start date: enter the starting date.
• Due date: enter the ending date.
• Priority: select a priority level.
4. Press <Save> to save the event.
Calendar (Menu 7)
Entering a new anniversary
•
Menu functions
Alarm: set an alarm for the event.
before: set how long before the event the
alarm is to alert you.
• Alarm tone: select an alarm tone.
• Repeat: (for Schedule) set the event to recur
and select a repeat unit.
• until: (for Schedule) set the ending date, if
the event will recur.
4. Press <Save> to save the event.
67
Menu functions
Viewing an event
•
Once you have scheduled events, the event icons and
the number of events for a specific day appears at the
bottom of the calendar.
•
•
Scheduled event
•
Anniversary
•
To do item
•
Miscellaneous event
Accessing an event
1. Select a date on the calendar to display the events
for the day.
2. Select an event to view its details.
3. Press [Left] or [Right] to access the other events
scheduled for the selected day.
Using event options
While viewing an event, press <Options> to access
the following options:
• Edit: edit the event.
• Create: add a new event.
• Send via: send the event via SMS, MMS, e-mail,
or Bluetooth.
68
•
•
View mode: change the view mode of the
calendar.
Done/Undone: change the status of the to-do
item.
Delete: delete the event.
Print via Bluetooth: print the event by
connecting the phone to a printer via Bluetooth.
Viewing an event in a different mode
You can change the calendar display to Day view or
Week view. Press <Options> and select View mode
→ a view mode.
Day view
You can view events for the selected date. Select an
event to view its details.
The following icons may display to indicate the event
status:
•
Alarm set
•
Recurring event
•
To do item priority (Red: high, Blue: normal,
Grey: low)
•
Completed To do item
Week view
Taking a photo
You can view events for the selected week. A cell on
the timetable indicates the presence of a schedule
item. Select a cell in the day you want.
You can take photos in various modes. The camera
produces JPEG photos.
Camera (Menu 8)
Taking a photo with the phone open
You can use the camera module embedded in your
phone to take photos and record videos.
1. Access the Camera menu or press and hold [ ]
to turn on the camera.
2. Adjust the image to be captured.
• Press < > to access camera options.
next section
• Use the keypad to change the camera settings
or switch to other modes.p. 70
3. Press [ ] to take a photo. The photo is saved in
the Photos folder.
4. To
Press
access photo options
<Options>.p. 71
delete the photo
[C] and then <Yes>.
return to Capture mode
Camera (Menu 8)
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are
not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Menu functions
To access this menu, press <Menu> in Idle mode and
select Camera, or press and hold [ ].
When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
<Back>.
69
Menu functions
Using camera options in Capture mode
In Capture mode, press < > to access the following
options:
• Record video: switch to Record mode.
• Shooting mode: take a photo in the following
modes:
Single shot: take a photo in normal mode. You
can select whether or not the camera automatically
saves a photo.
Multi shot: take a series of action stills. You can
select the number of photos the camera will take
and the shooting speed.
• Effects: change the colour tone or apply a special
effect.
• Frames: apply a decorative frame.
• Timer: set a time delay before the camera takes a
photo.
• Go to photos: access the Photos folder.
• Settings: change the default settings for taking a
photo.
Size: select an image size.
70
•
Quality: select an image quality setting.
View finder: select a preview screen.
Shutter sound: select the sound that you hear
when you press the shutter release, [ ].
Zoom sound: turn the sound effect for zooming
on or off.
Brightness sound: turn the sound effect for
brightness adjustment on or off.
Default name: change the default prefix of the
photo name.
Camera short cuts: view the functions of the
keys you can use in Capture mode.
Using the keypad in Capture mode
You can use the keypad to customise your camera
settings in Capture mode.
Key
Function
Left/Right
Adjusts the image brightness.
Up/Down
Zooms in or out.
Flips the image vertically.
•
Shows the mirror image.
•
1
Switches to Record mode.p. 72
2
Changes the image size.
3
Changes the image quality.
4
Changes the shooting mode.
5
Changes the colour tone or applies a
special effect.
7
Selects a decorative frame.
8
Sets the timer.
9
Goes to the Photos folder.
Changes the preview screen.
Using photo options
After saving a photo, press <Options> to access the
following options:
• Take another: return to Capture mode.
•
•
•
•
•
•
•
•
Send via: send the file via MMS, e-mail, or
Bluetooth.
Set as: set the photo as wallpaper for the displays
or as a caller ID image for a Phonebook entry.
Delete: delete the file.
Multi shot delete all: delete one of the
multi-shot photos.
Rename: change the file name.
Go to photos: access the Photos folder.p. 62
Share for Bluetooth: share the selected file or all
files with other Bluetooth devices.
Print via Bluetooth: print the image by
connecting the phone to a printer via Bluetooth.
Protection: protect the file from being deleted.
Properties: access the file properties.
Camera (Menu 8)
Function
Menu functions
Key
Taking a photo with the phone closed
1. Press and hold [ ].
2. If necessary, press [
] to highlight
.
71
Menu functions
3. To
Press
flip the image vertically
[ ].
show the mirror image
[
adjust the brightness
[
].
zoom in or out
[
].
].
4. Press [ ] to take a photo. The photo is
automatically saved.
5. To
Press
play back the video clip
[
].
access video options
<
delete the video clip
[C] and then <Yes>.
return to Record mode
<
>.p. 74
>.
Recording a video
Using camera options in Record mode
You can record a video of what is displayed on the
camera screen and save it.
In Record mode, press < > to access the following
options:
• Take a photo: switch to Capture mode.
• Effects: change the colour tone or apply a special
effect.
• Timer: set a time delay before the camera starts
recording.
• Go to videos: access the Videos folder.
• Settings: change the following settings for
recording a video:
Recording a video with the phone open
1. In Capture mode, press [1].
2. Adjust the image to be captured.
• Press < > to access camera options.
next section
• Use the keypad to change the camera settings
or switch to other modes.p. 73
3. Press [ ] to start recording.
72
4. Press [ ] or < > to stop recording. The video is
automatically saved in the Videos folder.
Using the keypad in Record mode
You can use the keypad to customise your camera
settings in Record mode:
Key
Function
Left/Right
Adjusts the image brightness.
Up/Down
Zooms in or out.
Menu functions
Flips the image vertically.
Shows the mirror image.
1
Switches to Capture mode.p. 69
2
Changes the file size.
3
Changes the image quality.
4
Changes the video recording mode.
5
Changes the colour tone or applies a
special effect.
7
Mutes or unmutes audio.
8
Sets the timer.
9
Goes to the Videos folder.
Camera (Menu 8)
•
Recording mode: select a video recording mode.
Select Limit of MMS to record a video suitable for
messaging.
Select Normal to record a video within the limit of
the currently available memory.
Size: select a file size.
Quality: select an image quality setting.
Audio rec.: record audio with a video clip.
Zoom sound: turn the sound effect for zooming
on or off.
Brightness sound: turn the sound effect for
brightness adjustment on or off.
Default name: change the default prefix of the
video name.
Camcorder short cuts: view the functions of the
keys you can use in Record mode.
73
Menu functions
Using video options
3. To
After saving a video clip, press < > to access the
following options:
• Record another: return to Record mode.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Delete : delete the video clip
• Rename: change the file name.
• Go to videos: access the Videos folder.p. 63
• Share for Bluetooth : share the file with other
Bluetooth devices
• Protection: protect the file from being deleted.
• Properties: access the file properties.
Recording a video with the phone closed
1. Press and hold [ ].
2. If necessary, press [
3. To
74
] to highlight
Press
flip the image vertically
[ ].
show the mirror image
[ ].
adjust the brightness
[
].
.
zoom in or out
Press
[
].
4. Press [ ] to start recording.
5. Press [ ] to stop recording. The video clip is
automatically saved.
Settings (Menu 9)
The Settings menu provides you with various setting
options to customise the phone to your preferences
and needs. You can also reset the settings to their
default status.
To access this menu, press <Menu> in Idle mode and
select Settings.
Time & Date (Menu 9.1)
Use this menu to change the time and date displayed
on your phone. Before setting the time and date,
specify your time zone in the World time menu.
p. 42
•
•
Phone settings (Menu 9.2)
Many different features of your phone’s system can be
customised to suit your preferences.
Language (Menu 9.2.1)
Use this menu to select one of several languages for
the display text.
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Short cut (Menu 9.2.3)
You can use the Navigation keys as shortcuts to access
specific menus directly from Idle mode. Use this menu
to assign a shortcut to a key.
Assigning a shortcut menu
1. Select a key to be used as a shortcut key.
2. Select the menu to be assigned to the key.
Settings (Menu 9)
•
Greeting message (Menu 9.2.2)
Menu functions
•
•
•
•
•
Time: enter the current time.
Home zone: press [
] and set the home time
zone. Select the city that corresponds to your
home zone. To set the daylight saving time, select
Set daylight saving time.
AM/PM: select AM or PM in 12-hour time format.
Time format: select the time format.
Set date: enter the current date.
Date format: select the date format.
Week start day: set which day of the week the
calendar starts with.
Auto update: select to apply daylight savings
time to the current time, if Set daylight saving
time in Home zone is selected.
Using shortcut options
Press <Options> to access the following options:
• Change: assign or change a shortcut menu.
• Remove: deactivate the shortcut assignment to
the selected key.
• Remove all: deactivate all shortcut assignments.
Advanced shortcut (Menu 9.2.4)
Use this menu to activate the Advanced shortcut
feature. You can quickly access the alarm, calendar,
and calculator applications from the dialling screen.
75
Menu functions
Activating the Advanced shortcut feature
1. On the Advanced screen, select On.
2. Press <Save>.
Using the Advanced shortcut feature
1. For an alarm or scheduled event, enter the time or
the date you want as 4-digit in Idle mode.
For the calculator, enter the first number you want
to use.
2. Press one of the Navigation keys.
You can access the following applications:
76
Key
Application
Up
Alarmp. 42
Down
Convertorp. 43
Left
Messagesp. 48
Right
Calendarp. 66
Volume key (Menu 9.2.5)
Use this menu to set whether the phone mutes the call
ringer or rejects a call if you press and hold [ / ]
when a call comes in.
Extra settings (Menu 9.2.6)
You can turn the automatic redialling or answering
feature on or off, and lock the external keys.
• Auto redial: set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
• Anykey answer: answer an incoming call by
pressing any key, except [ ] or <Reject>.
• Voice clarity: remove extraneous noise and
increase call quality so that the person with whom
you are speaking can hear you clearly even if you
are in a noisy place.
• Active folder: answer an incoming call by opening
the phone.
• Cover keylock: lock the exposed keys to keep
accidental presses from affecting your phone’s
operation when the phone is closed.
Dialling display (Menu 9.3.3)
Use this menu to change settings for the display.
Use this menu to select a font size of colour, or
background colour for the numbers entered while
dialling.
Wallpaper (Menu 9.3.1)
Text display (Menu 9.3.2)
Use this menu to change the display settings for the
text displayed on the idle screen.
• Text position: select a text position. If you don’t
want to display text in Idle mode, select Off.
• Text style: select a font style.
• Text colour: select a font colour.
Calendar (Menu 9.3.4)
Use this menu to display the calendar of the current
month on the idle screen.
Skin (Menu 9.3.5)
You can select a skin colour pattern for Menu mode.
Settings (Menu 9)
You can set up the idle screen on both displays.
• Main display: select an image to be displayed on
the main display.
• Cover display: change the settings for the
external display:
Clock: select a clock type.
Cover title: set a message to be displayed on the
external display.
Wallpaper images: change the wallpaper image
for the external display.
Menu functions
Display settings (Menu 9.3)
LCD brightness (Menu 9.3.6)
You can adjust the brightness of the display for
varying lighting conditions.
Show caller information (Menu 9.3.7)
Use this menu to set the phone to display missed call
notifications with the most recently missed caller’s
information. To set the external display to show caller
information, select With cover display.
77
Menu functions
Sound settings (Menu 9.4)
Use this menu to customise various sound settings.
Incoming call (Menu 9.4.1)
Use this menu to change the sound settings for
incoming calls.
• Alert type: specify how you are to be informed of
incoming calls.
• Ring tone: select a ringtone to be used for the call
ringer.
• Volume: select a ringtone volume.
Keypad tone (Menu 9.4.2)
Use this menu to select the tone that the phone
sounds when you press a key.
You can adjust the keypad tone volume using
[ / ] in Idle mode.
Message tone (Menu 9.4.3)
Use this menu to change the sound settings for
incoming SMS messages, MMS messages, e-mails,
and CB messages.
78
•
•
•
Tone: select one of several message tones.
Alert type: specify how you are to be informed
when a message comes in.
Repetition: specify how often the phone informs
you of a new message.
Power on/off (Menu 9.4.4)
Use this menu to select the melody that the phone
sounds when it is switched on or off.
Folder tone (Menu 9.4.5)
Use this menu to select the tone that the phone
sounds when you open or close the phone.
Quiet mode (Menu 9.4.6)
Use this menu to set how the phone acts to alert you
to a specific event while in Quiet mode.
Extra tones (Menu 9.4.7)
Use this menu to customise additional tones for the
phone.
• Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
•
•
Light settings (Menu 9.5)
Backlight (Menu 9.5.1)
You can change the settings for backlight or icons for
the external display.
• Main LCD on: select the length of time the
backlight stays on.
• Main LCD dim: select the length of time the
display stays on in Dim mode after the backlight
turns off. After a specified time, the display turns
off.
Show cover indicators: set whether or not the
icons are shown on the external display after the
display turns off.
Keypad light (Menu 9.5.2)
You can set how the phone controls the use of the
keypad light.
• Use at any time: the keypad light is always used.
• Use at night time: the keypad light is used only
between 5:00 PM and 9:00 AM.
• Use at custom time: specify the time period that
the keypad light is used.
Network services (Menu 9.6)
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them, if you wish.
Call diverting (Menu 9.6.1)
This network service reroutes incoming calls to a
phone number that you specify.
79
Settings (Menu 9)
Use this menu to change settings for the backlight.
•
Menu functions
•
Connection tone: set the phone to beep when an
outgoing call connects to the system.
Alerts on call: set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
Indicative tones: set the phone to beep when
you have made a mistake or something wrong
happens on the phone.
Menu functions
1. Select a call diverting option:
• Divert always: divert all calls.
• Busy: divert calls when you are on another
call.
• No reply: divert calls when you do not answer
the phone.
• Unreachable: divert calls when you are not in
an area covered by your service provider or
when your phone is switched off.
• Cancel all: cancel all call diverting options.
2. Select the type of calls to be diverted.
3. Select Activate. To deactivate call diverting, select
Deactivate.
4. Move to the Divert to line.
5. Enter the number to which calls are to be diverted.
6. If you selected No reply, move to the Seconds
(sec) line and select the length of time the network
delays before diverting a call.
7. Press <Select>.
80
Call barring (Menu 9.6.2)
This network service allows you to restrict your calls.
1. Select a call barring option:
• All outgoing: prohibit all outgoing calls.
• International: prohibit international calls.
• International except home: only allow calls
to numbers within the current country when
you are abroad, and to your home country.
• All incoming: prohibit incoming calls.
• Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home country.
• Cancel all: cancel all call barring settings,
allowing calls to be sent and received normally.
• Change barring password: change the call
barring password obtained from your service
provider.
2. Select the type of calls to be barred.
3. Select Activate. To deactivate call barring, select
Deactivate.
4. Enter the call barring password supplied by your
service provider and press <Select>.
Call waiting (Menu 9.6.3)
Voice mail server (Menu 9.6.6)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which call waiting option
will apply.
2. Select Activate and press <Select>. To
deactivate call waiting, select Deactivate.
Use this menu to store the number of the voicemail
server and access your voicemails.
Caller ID (Menu 9.6.5)
This network service allows you to prevent your phone
number from being displayed on the phone of the
person being called. If you select Default, the phone
will use the default setting provided by the network.
Some networks may not allow you to change this
setting.
•
Connect to voice mail: connect to the voicemail
server to listen to your messages.
Voice server number: enter the voicemail server
number.
Settings (Menu 9)
This network service allows you to either automatically
or manually select the network to be used while
roaming outside of your home area. You can select a
network other than your home network only if there is
a valid roaming agreement between the two.
•
Menu functions
Network selection (Menu 9.6.4)
You must store the voicemail server number before
accessing the server. Your service provider can give
you the number.
Band selection (Menu 9.6.7)
For the phone to make and receive phone calls, it
must register with an available network. Your phone
can handle any of the following types of networks:
GSM 1900 and Combined GSM 900/1800.
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you may need to change to an
appropriate band.
81
Menu functions
Bluetooth (Menu 9.7)
Using the Bluetooth feature, you can connect the
phone wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or control
the phone remotely.
Bluetooth technology allows free wireless connections
between all Bluetooth-compliant devices within a
range of 10 meters. Since the devices communicate
using radio waves, they do not need to be in line of
sight to each other.
• If there are obstacles between the devices, the
operating distance may be reduced.
• It is recommended that you don’t use the
Bluetooth feature while using multimedia features,
such as voice recorder, camera, and MP3 player,
or vice versa, for better performance.
• Some devices may not be compatible with your
phone.
Setting up the Bluetooth feature
The Bluetooth menu provides the following options:
• Activation: activate or deactivate the Bluetooth
feature.
82
•
•
•
•
•
My devices: search for connectable Bluetooth
devices.
My phone’s visibility: allow other Bluetooth
devices to search for your phone.
My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
Secure mode: determine if the phone asks for
your confirmation when other devices access your
data.
Bluetooth services: display available Bluetooth
services.
Searching for and pairing with a Bluetooth
device
1. From the Bluetooth setting options, select My
devices.
2. Select Search new device.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
type of device:
•
Computer •
Mobile phone
•
Printer
•
Unknown device
•
PDA
•
Headset/Hands-free car kit
Using device options
From the device list, press <Options> to access the
following options:
•
•
•
•
•
Settings (Menu 9)
Some devices, especially headsets or hands-free car
kits, may have a fixed Bluetooth PIN, such as 0000.
If the other device has a code, you must enter it.
•
Connect: connect to a headset or hands-free car
kit.
Disconnect: end the connection with the
connected device.
Browse files: search for data from the device and
import data directly to your phone.
Service list: access the Bluetooth service list of
the device.
Rename: rename the paired device.
Authorize device/Unauthorize device:
determine whether or not the phone asks you to
permit connection when other devices try to
connect to your phone.
Delete: remove the selected device or all devices
from the list.
Menu functions
The colour of the icon indicates the status of the
the device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are currently connected to
your phone
3. Select a device.
4. Enter a Bluetooth PIN and press <OK>. This code
is used just once and you don’t need to memorise
it.
When the owner of the other device enters the
same code, pairing is complete.
•
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
3. Scroll to the item you want and press <Options>.
4. Select Send via → Bluetooth.
83
Menu functions
The phone searches for devices within range and
displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press <OK>.
PIN check (Menu 9.8.1)
Receiving data via Bluetooth
Change PIN (Menu 9.8.2)
To receive data via Bluetooth, your phone’s Bluetooth
feature must be active.
Use this menu to change your PIN. The PIN check
feature must be enabled to change the PIN.
If an unauthorised Bluetooth device sends data to your
phone, the phone displays a confirmation message. To
receive data, press <Yes>.
Phone lock (Menu 9.8.3)
Security (Menu 9.8)
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
If you enter an incorrect PIN/PIN2 three times in
succession, the SIM card is blocked. To unblock it
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by your
service provider.
84
The 4- to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
Use this menu to lock the phone from unauthorised
use.
The password is preset to 00000000. To change the
password, use the Change password menu.
Change password (Menu 9.8.4)
Use this menu to change your phone password.
Memory status (Menu 9.9)
Use this menu to lock access to messages, files, or all
menu functions on the phone, except for call
functions.
Use this menu to check the amount of memory being
used for storing data in Messages, File manager,
Calendar, Phonebook, and JAVA world. You can
also check the shared memory for MMS, Email, and
File manager.
When a privacy option is enabled, you must enter the
phone password to access the locked items or
functions.
SIM lock (Menu 9.8.6)
FDN mode (Menu 9.8.7)
If supported by your SIM card, Fixed Dialling Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored on
the SIM card.
Reset settings (Menu 9.10)
Use this menu to reset the phone’s settings you have
changed.
1. Press [
] to select the setting categories to be
reset.
2. Press <Reset>.
3. Press <Yes> to confirm the reset.
4. Enter the phone password and press <OK>.
Settings (Menu 9)
This menu allows your phone to work only with the
current SIM by assigning a SIM lock code. You must
enter the SIM lock code to use a different SIM card.
Menu functions
Privacy (Menu 9.8.5)
The password is preset to 00000000. You can
change this password.p. 84
Change PIN2 (Menu 9.8.8)
If supported by your SIM card, use this menu to
change your current PIN2.
85
Solve problems
Help and personal needs
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Insert SIM”
• Be sure that the SIM card is correctly installed.
“Enter password”
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
86
“Enter PUK”
• The PIN has been entered incorrectly three times
in succession, and the SIM card is now blocked.
Enter the PUK supplied by your service provider.
“No service,” “Network failure,” or “Not done”
displays
• The network connection has been lost. You may be
in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
You have entered a number but it was not dialled
• Be sure that you have pressed [
].
• Be sure you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
Your correspondent cannot reach you
• Be sure that your phone is switched on. ([
pressed for more than one second.)
]
•
•
Be sure that you are accessing the correct cellular
network.
Be sure that you have not set an incoming call
barring option.
The phone starts beeping and “Low battery”
flashes on the display
• Your battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
). The number of bars indicates the signal
strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
Solve problems
Your correspondent cannot hear you speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is located
at the bottom of the phone.
No number is dialled when you re-call a
Phonebook entry
• Use the Contacts list menu to ensure the number
has been stored correctly.
• Re-store the number, if necessary.
The battery doesn’t charge properly or the phone
sometimes turns itself off
• Wipe the charging contacts both on the phone and
on the battery with a clean soft cloth.
If the above guidelines do not help you to solve
the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
87
Health and safety information
SAR certification information
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
Your mobile phone is a radio transmitter and receiver. It is
designed and manufactured to not exceed the limits for
exposure to radio-frequency (RF) energy, as
recommended by the EU Council. These limits are part of
comprehensive guidelines and establish permitted levels
of RF energy for the general population. The guidelines
were developed by independent scientific organisations
through the periodic and thorough evaluation of scientific
studies. The limits include a substantial safety margin
designed to ensure the safety of all persons, regardless of
age and health.
The exposure standard for mobile phones employs a unit
of measurement known as Specific Absorption Rate (SAR).
The SAR limit recommended by the EU Council is 2.0 W/
kg.1
The highest SAR value for this model phone was 1.07 W/
kg.
88
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple
power levels so as to use only the power required to reach
the network. In general, the closer you are to a base
station, the lower the power output of the phone.
Before a new model phone is available for sale to the
public, compliance with the European R&TTE Directive
must be shown. This directive includes as one of its
essential requirements the protection of the health and
safety of the user and any other person.
1 The SAR limit for mobile phones used by the public is 2.0 watts/
kilogram (W/kg) averaged over ten grams of body tissue. The limit
incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in
measurements. The SAR values may vary, depending on national
reporting requirements and the network band.
Precautions when using batteries
•
•
•
•
•
•
•
•
Extreme temperatures will affect the charging capacity
of your battery: it may require cooling or warming
first.
Do not leave the battery in hot or cold places because
the capacity and lifetime of the battery will be
reduced. Try to keep the battery at room temperature.
A phone with a hot or cold battery may not work
temporarily, even when the battery is fully charged.
Li-ion batteries are particularly affected by
temperatures below 0°C (32°F).
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object like a coin,
clip or pen causes a direct connection between the +
and – terminals of the battery (metal strips on the
battery). For example, do not carry a spare battery in
a pocket or bag where the battery may contact metal
objects. Short-circuiting the terminals may damage
the battery or the object causing the short-circuiting.
Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
Health and safety information
•
•
Never use a charger or battery that is damaged in any
way.
Use the battery only for its intended purpose.
If you use the phone near the network’s base station,
it uses less power. Talk and standby time are greatly
affected by the signal strength on the cellular network
and the parameters set by the network operator.
Battery charging time depends on the remaining
battery charge, the type of battery, and the charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out. When
the operation time is noticeably shorter than normal, it
is time to buy a new battery.
If left unused, a fully charged battery will discharge
itself over time.
Use only Samsung-approved batteries, and recharge
your battery only with Samsung-approved chargers.
Disconnect the charger from the power source when it
is not in use. Do not leave the battery connected to a
charger for more than a week, since overcharging may
shorten its life.
89
Health and safety information
Road safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When you are driving a car, driving is your first
responsibility. When using your wireless phone while
driving, follow local regulations in the country or region
you are in.
Operating environment
Remember to follow any special regulations in force in the
area you are in, and always switch off your phone
whenever it is forbidden to use it, or when it may cause
interference or danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
90
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
Electronic devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with the independent research and
recommendations of Wireless Technology Research. If you
have any reason to suspect that interference is taking
place, switch off your phone immediately.
Hearing aids
Posted facilities
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
Switch off your phone in any facility where posted notices
require you to do so.
Other medical devices
Switch off your phone when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Your physician may be able to assist you in obtaining this
information.
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do so.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Health and safety information
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy.
Potentially explosive environments
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations are
in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include the areas
below decks on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas, such as
propane or butane, areas where the air contains chemicals
or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
91
Health and safety information
Emergency calls
Other important safety information
This phone, like any wireless phone, operates using radio
signals, wireless, and landline networks as well as userprogrammed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications like medical emergencies.
•
To make or receive calls, the phone must be switched on
and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
•
•
•
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press [
].
Certain features like Call Barring may need to be
deactivated before you can make an emergency call.
Consult this document and your local cellular service
provider.
92
•
•
Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the
phone, its parts, or accessories.
For vehicles equipped with an air bag, remember that
an air bag inflates with great force. Do not place
objects, including installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. Improperly installed wireless
equipment could result in serious injury if the air bag
inflates.
Switch off your phone before boarding an aircraft. It is
dangerous and illegal to use wireless phones in an
aircraft because they can interfere with the operation
of the aircraft.
Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
Care and maintenance
•
•
•
•
•
Keep your phone and all its parts and accessories out
of the reach of small children and pets. They may
inadvertently damage these things or choke on small
parts.
Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the
phone.
Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
•
•
•
•
•
•
•
Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature,
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-and-water
solution.
Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
Do not put the phone in or on heating devices, such as
a microwave oven, stove, or radiator. The phone may
explode when overheated.
When the phone or battery gets wet, the label
indicating water damage inside the phone changes
colour. In this case, phone repairs are no longer
guaranteed by the manufacturer's warranty, even if
the warranty for your phone has not expired.
If your phone has a flash or light, do not use it too
close to the eyes of people or animals. This may cause
damage to their eyes.
Health and safety information
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
93
Health and safety information
•
•
94
Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger, or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you, and
if necessary, arrange for service.
Index
A
ABC mode, text input • 23
Active folder • 76
Alarm • 42
Answering
call • 27
second call • 28
Anykey answer • 76
Auto redial • 76
B
Background image • 77
Backlight time, set
display • 79
keypad • 79
Band selection • 81
Barring, calls • 80
Battery
charging • 7
low indicator • 8
precautions • 89
Bluetooth
receiving, data • 84
sending, data • 83
settings • 82
Broadcast messages • 62
Browser, web • 44
C
Calculator • 43
Calendar • 65
Call cost • 31
Call log
dialled • 30
missed • 30
received • 31
Call time • 31
Caller ID • 77, 81
Calls
answering • 27
barring • 80
diverting • 79
holding • 28
redialling • 26
rejecting • 27
transferring • 29
waiting • 81
Camera
photos • 69
videos • 72
CB (Cell Broadcast) messages •
62
Characters, enter • 23
Configuration messages • 51
Connection tone • 79
Converter • 43
Creating messages
e-mail • 50
MMS • 49
SMS • 48
D
Date, set • 75
Deleting
call log • 31
e-mail • 53, 54, 56
events • 68
MMS • 52, 53, 56
phonebook • 32, 35
SMS • 51, 53, 56
Dialled calls • 30
Dialling display, set • 77
Display
backlight, set • 79
brightness • 77
icons • 10
language • 75
layout • 10
settings • 77
Diverting, calls • 79
DRM (Digital Rights
Management) • 62
DTMF tones, send • 29
E
E-mails
creating/sending • 50
deleting • 54
setting • 58
viewing • 54
Emergency calls • 92
F
FDN (Fixed Dialling Number)
mode • 85
File manager • 62
FM radio • 40
Folder tone • 78
G
Games • 39
Greeting message • 75
H
Health and safety • 88
95
Index
Holding, call • 28
I
Icons, description • 10
Images, downloaded • 62
Inbox, messages
e-mail • 54
MMS/SMS • 51
International calls • 26
Internet • 44
J
Java applications • 39
K
Keypad lock • 76
Keypad tones
selecting • 78
sending/muting • 29
volume • 78
L
Language, select • 75
Last number, redial • 26
Light settings • 79
Locking
cover keypad • 76
menu functions • 85
phone • 84
96
SIM card • 85
Low battery indicator • 8
Multiparty-call • 29
Music, downloaded • 64
M
N
Memory status
downloaded items • 65
file manager • 65
games 40
messages • 62
phonebook 35
shared memory • 85
Message tone • 78
Messages
cell broadcast • 62
configuration • 52
e-mail • 50, 54
greeting • 75
MMS • 49, 52
push • 52, 61
SMS • 48, 51
Minute minder • 78
Missed calls • 30
MMS messages
creating/sending • 49
deleting • 52
setting • 56
viewing • 51
MP3 player • 36
Name card • 35
Names
entering • 23
searching • 32
Network band, select • 81
Network selection • 81
Network services • 79
O
Outbox, messages • 53
P
Password
call barring • 80
phone • 84
Phone
care and maintenance •
93
display • 10
icons • 10
locking • 84
password • 84
resetting • 85
switching on/off • 8
unpacking • 6
Phonebook
adding • 33
deleting • 32, 35
finding • 32
managing • 35
options • 32
speed dialling • 34
Photos
taking • 69
viewing • 62
PIN, change • 84
PIN2, change • 85
Power on/off tone • 78
Privacy • 85
Problems, solve • 86
Push messages • 52, 61
Q
Quiet mode
entering • 13
setting • 78
R
Received calls • 31
Received messages
e-mail • 54
MMS/SMS • 51
Recording
videos • 72
S
Safety
information • 88
precautions • 1
Security, calls • 84
Sent messages • 53
Shortcut • 75
SIM card
inserting • 7
locking • 85
Skin colour • 77
SMS messages
creating/sending • 48
deleting • 51
setting • 56
viewing • 51
Sound settings • 78
Sounds, downloaded • 64
Speed dial • 34
Stopwatch • 44
Switching on/off
microphone • 28
phone • 8
T
Index
voice memos • 38
Redialling
automatically • 76
manually • 26
Resetting phone • 85
Ringer
incoming calls • 78
messages • 78
Road safety • 90
Roaming • 81
T9 mode, text input • 24
Templates, message • 55
Text, enter • 23
Time, set • 75
Timer • 44
V
Videos
playing • 63
recording • 72
Voice recorder
playing • 39
recording • 38
Voicemail server • 81
W
Waiting call • 81
Wallpaper • 77
Web browser
access • 44
bookmarks • 46
World time • 42
97