I
©
®
I
ooo
0
I,
OWNER'S
MANUAL
RISK OFELECTRIC
SHOCK
DONOTOPEN
CAUTION:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert you to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert you to the presence
of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
1
Read these instructions.
2
Keep these instructions.
3
Heed all warnings.
4
Follow all instructions.
5
Do not use this apparatus near water.
6
Clean only with dry cloth.
7
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9
Do not defeat the safety purpose of the polarized or
grounding-type
plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement
10
of the obsolete outlet.
WARNING
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
TO REDUCE THE RISK OF FIRE OR ELECTRIC
point where they exit from the apparatus.
SHOCK, DO NOT EXPOSE THIS UNITTO
RAIN OR
11
Only use attachments/accessories
manufacturer.
12
Use only with the cart, stand, tripod,
bracket, or table specified by the manufac-
MOISTURE.
IMPORTANT
turer, or sold with the apparatus. When a
cart is used, use caution when moving the
Please record the serial number of this unit in the space
below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner's Manual in a safe place for future
reference.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNITTO RAIN OR
MOISTURE.
cart/apparatus
from tip-over.
13
combination
to avoid injury
Unplug this apparatus during lightning storms or when
unused for long periods of time.
14
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
CAUTION
specified by the
FCC INFORMATION
1.
IMPORTANT
NOTICE : DO NOT MODIFYTHIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements.
Modifications
not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2.
IMPORTANT : When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3.
NOTE : This product has been tested and found to
comply with the requirements listed in FCC Regulations, Part 15 for Class "B" digital devices. Compliance
with these requirements provides a reasonable level of
(for US customers
only)
Compliance with FCC regulations does not guarantee
that interference will not occur in all installations. If
this product is found to be the source of interference,
which can be determined by turning the unit "OFF"
and "ON", please try to eliminate the problem by using
one of the following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch
(circuit breaker or fuse) circuits or install AC line filter/
S.
In the case of radio or TV interference, relocate/
reorient the antenna. If the antenna lead-in is 300
ohm ribbon lead, change the lead-in to coaxial type
cable.
assurance that your use of this product in a residential
environment will not result in harmful interference with
If these corrective measures do not produce satisfac-
other electronic devices.
tory results, please contact the local retailer autho-
This equipment generates/uses radio frequencies and,
if not installed and used according to the instructions
rized to distribute this type of product. If you can not
locate the appropriate retailer, please contact Yamaha
Electronics Corp., U.S.A. 6660 Orangethorpe Ave,
found in the users manual, may cause interference
harmful to the operation of other electronic
devices.
Buena Park, CA 90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation
subsidiaries.
We Want You Listening
of America or its
For A Lifetime
YAMAHA and the Electronic Industries Association's
Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring
or distortion - and, most importantly, without affecting your
sensitive hearing.
Since hearing damage from loud sounds is often
undetectable until it is too late, YAMAHA and the
Electronic Industries Association's Consumer
Electronics Group recommend you to avoid
prolonged exposure from excessive volume
levels.
I1
MST_I/.NG
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
L_J
]
L_J
(Australia model)
CAUTION
1
To assure the finest performance,
please read this
manual carefully. Keep it in a safe place for future
reference.
2
Install this unit in a well ventilated, cool, dry, and clean
place with at least 5 cm above, behind and on the both
sides of this unit - away from direct sunlight, heat
sources, vibration, dust, moisture, and/or cold.
3
Position this unit away from other electrical
motors and transformers to avoid humming
not place this unit where it may get exposed
any kind of liquid to prevent fire or electrical
appliances,
sounds, do
to rain or
shock.
4
Avoid extreme temperature swings or excessive use of
humidifier in the room where this unit is installed to
prevent condensation inside this unit, which may cause
an electrical shock, fire damage to this unit, and/or
personal injury.
5
Do not cover this unit with a newspaper, a tablecloth, a
curtain, etc. in order not to obstruct heat radiation. If the
temperature inside this unit rises, it may cause fire,
damage to this unit and/or personal injury.
6
Avoid installing this unit in a place where foreign objects
and liquid might fall. It might cause a fire, damage to this
unit and/or personal injury. Do not place the following
objects on this unit:
• Other components, as they may cause damage and/or
discoloration on the surface of this unit.
• Burning objects (i.e., candles), as they may cause fire,
damage to this unit and/or personal injury.
• Containers with liquid in them, as they may cause an
electrical shock to the user and/or damage to this unit.
7
Do not operate this unit upside-down.
possibly causing damage.
It may overheat,
8
Do not use force on switches, controls or connection
cables. Never pull the cables when disconnecting them.
9
Only voltage specified on this unit must be used. Using
this unit with a higher voltage than specified is dangerous
and may result in fire or other accidents. YAMAHA will not
be held responsible for any damage resulting from the
use of this unit with a voltage other than that specified.
10
Do not attempt to clean this unit with chemical solvents;
this might damage the finish. Use a clean, dry cloth.
11
Disconnect the power cord from the wall outlet when not
planning to use this unit for a long period of time, or
during an electrical storm, as they may cause damage by
lightning.
12
Do not attempt to modify or fix this unit. Contact the
qualified YAMAHA service personnel when any service is
needed. Cabinet should never be opened for any
reasons.
13 Be sure to read 'TROUBLESHOOTING'
section
regarding common operating errors before concluding
that this unit is faulty.
CAUTION
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
DANGER
Visible laser radiation when open. Avoid direct exposure to
beam.
When this unit is plugged to the wall outlet, do not place your
eyes close to the opening of the disc tray and other openings
to look into inside.
Laser component in this product is capable of emitting
radiation exceeding the limit for Class 1.
This unit is designed for home use only. Do not use this unit
for business purposes.
Be sure to place this unit on a level surface. If not so, this
unit will fail to work normally at the PLAYXCHANGE
operation and cause damage to the disc(s) and this unit itself.
Caution
for moving
this unit
• When moving this unit, first remove all discs from the disc
table and close the table by pressing the OPEN/CLOSE
button, and then switch off the power after you confirm that
the front panel display indicates as follows.
_2345
iiii::
iiii::
iiii
Never switch off the power if the front panel display is not
pictured as above, otherwise the unit will break down
during moving because the internal mechanism is not
locked.
• When moving this unit, be sure to first disconnect the
power cord from the AC outlet and disconnect all cords
connecting this unit to other equipment.
FOR CANADIAN
CUSTOMERS
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
•
5-Disc
Video,
Auto-changer
for playing
audio CD and Video CD
•
CD-R
and CD-RW
•
MP3 format
•
PLAYXCHANGE;
playing
•
DVD-
Disc changing
capability
while
and 1 COAXIAL
digital
outputs
..................................
Before starting play ....................................
Playing a disc .............................................
Multi-speed play .........................................
Using a disc's menu ...................................
Enhancing video quality .............................
DVD-Audio
features ..................................
PLAY
all features
Multi-language,
Easy operation
through
•
Multi-speed
playback
•
Progressive
video output
of DVD discs
Parental
on-screen
control,
etc.)
menu
capability
capability
(U.S.A.
and Canada
Component
Video and S-Video
outputs
for high picture
quality
ON-SCREEN MENU ..................................
21
Operating menu bar ....................................
Icons for disc menu ....................................
Shuttle screen .............................................
21
22
22
Icons for player menu .................................
23
1
2
2
2
4
4
6
Operating the setup menu ...........................
25
Summary of settings ...................................
26
Language selection and language code list
................................................................
27
Ratings ........................................................
PCM down conversion ...............................
28
28
Speaker
28
settings ..........................................
TROUBLESHOOTING .............................. 30
SPECIFICATIONS ....................... Back cover
11
11
11
13
14
14
15
Enhancing audio quality .............................
15
Switching audio tracks, subtitles and angles
................................................................
16
THE
and DTS decoders
with almost
•
•
REMOTE CONTROL .................................. 7
Installing batteries in the remote control ...... 7
Using the remote control .............................. 7
CONNECTIONS ........................................... 8
Audio connections ........................................ 8
Video connections ........................................ 9
Remote control in/out terminals ................. 10
Power supply cord ...................................... 10
OPERATION
Digital
models)
and PCM
FEATURES ....................................................
GETTING STARTED ...................................
Checking the package contents ....................
Disc information ...........................................
CONTROL REFERENCE GUIDE .............
Front panel/remote control ...........................
Display .........................................................
SPECIFYING
Compatible
for Dolby
96 kHz, 24 bit audio DAC for high sound quality
BASIC
Dolby
•
(Multi-angle,
supported
DTS, MPEG
•
play compatibility
another
1 OPTICAL
Digital,
•
DVD-Audio,
SEQUENCE
... 17
Repeat play .................................................
Repeat A-B .................................................
Random play ..............................................
Programmed
play .......................................
Bookmarks
.................................................
17
18
18
19
20
• The illustrations
of the player and the remote control used in this
manual show U.S.A. and Canada model. Australia
model is not
equipped
with the 'wogressive'
and printings
on the illustrations
feature,
and the related
are not applicable.
controls
Check
that the following
items are included
in your package.
Remote control
5"_ eb5
Batteries (AA, R06, UM-3)
RCA pin cable (audio/video)
5
3123153123
?rnD@
I c3ooc
I
I
I r=7oc3_
NI
U
3C3ED
C3 CD C3
U_
(U.S.A. and Canada models)
This DVD changer
is designed
of disc only. Never attempt
into this unit because
(Australia model)
for use with following
types
to load any other type of disc
it may damage
rl0 FSSC
DIGITAL
Manufactured
this unit.
"Dolby"
Dolby
under
license
and the double-D
from Dolby
symbol
Laboratories.
are trademarks
of
Laboratories.
DIGITAL
VIDEOCD_
In this manual,
DVD-Video
SURROUND
==,A.AU=O _
the type of discs are indicated
DVD-Audio
Video CD
Manufactured
as below.
Audio CD
Systems,
5,974,380,
issued
under
license
from Digital
Inc. US Pat. No.5,451,942,
5,978,762
and pending.
are registered
Inc. Copyright
Theater
5,956,674,
and other world-wide
"DTS"
trademarks
1996,2000
patents
and "DTS Digital
of Digital
Digital
Theater
Theater
Surround"
Systems,
Systems,
Inc.
All Rights Reserved.
• This unit is not compatible with Photo-CD, CD-ROM, DVDROM, DVD-RAM, SVCD, CDV, etc. (some DVD-R, DVD-RW
and DVD+RW can be played).
IDCDil
• Be sure to use only CD-R and CD-RW discs made by reliable
manufacturers. Some discs cannot be played depending on the
disc characteristics or recording conditions.
"DCDi"
Inc.
• Do not use any non standard shaped discs (heart, etc.).
• Do not use disc with tape, seals, or paste on it, damage to the unit
may result.
• Some DVD and VCD features described in this manual may not
be available or may operate in a different way because they are
subject to software producer's design. Check each disc's
instruction.
Example:
'@' appears when you press the skip buttons to move to the next
section.
2
byFAROUDJA
is a trademark
of Faroudia,
a division
of Sage
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
• Region
management
information
This DVD player is designed to meet DVD standard that supports region management system. Check the regional code
number marked on the disc packages. If the number does not match this unit's region number (see the below table or the back
of this unit), this unit refuses to play that disc.
Model
U.S.A. and Canada models
Region number of this unit
Discs can be played
_,
_
or a mark which includes
the region number ' 1'.
_,
_
or a mark which includes
the region number '4'.
Australia model
• Notes about handling
•
discs
Hold discs by touching only the edges or center hole.
•
•
When a disc is not currently being loaded on the disc
tray, store it in an appropriate case.
Playback of discs is generally not affected by small
particles of dust or fingerprints on their playing surface.
Even so, they should be kept clean. Wipe by using a
clean, dry cloth. Do not wipe with a circular motion;
wipe straight outward from the center.
Do not try to clean the disc's surface by using any type
of disc cleaner, record spray, anti-static spray or liquid,
or any other chemical-based liquid, because such
substances might irreparably damage the disc's surface.
Do not expose discs to direct sunlight, high temperature
or high humidity for a long period of time, because these
might warp or otherwise damage the disc.
NO!
• MP3 playback
This unit can play MP3 format audio recorded for personal use with a computer etc. onto CD-R or CD-RW. Play may not be
possible in some cases due to the condition of the recording.
Discs recorded using MP3 differ to CDs in the following ways.
• Structure of the disc (example)
• Repeat play
Since the MP3 format can store several albums on a disc,
You can use chapter repeat or title repeat.
an album is assigned to a 'Title', and a track is assigned
• Programmed play, random play
to a 'Chapter'.
You cannot use programmed play and random play.
•
On-screen icons for disc information during play
Title
Title
Total chapter number
• (Album)•
• (Album)
•
(Track)
Current chapter
Starting play from a selected chapter
Select a chapter using the numeric buttons (see 'To select
a specific track' in p.13) and press ENTER.
Elapsed play time (display only, you
cannot use 'time index' feature.)
3
Front Panel
qP
I)
®
..........
....
I,
,I
®
(U.S.A. mode]
Remote
Control
O POWER
Press to turn the power on and off.
O Disc tray
0
@
O
O
Up to 5 discs can be loaded
0
on this tray.
_ (OPEN/CLOSE)
Press to open and close the disc tray.
O PLAYXCHANGE
@
(p.12)
O _ (STOP)
Press to stop playback.
0
0
0
0
0
_D(PAUSE)
Press to pause.
0
_>(PLAY)
Press to start playback.
0
@
O
@
ON: front panel
PROGRESSIVE:
remote control
[U.S.A.
0
\
J
(U.S.A. model)
4
PROGRESSIVE
and Canada
models
_/<1<_, _>/_c_
(SKIP, SLOW/SEARCH):
_<l, _C_ (SKIP),
<1<_,_> (SLOW/SEARCH):
...(p.13)
@ VIDEO OFF (p.15)
0
only]
DISC SKIP
Press to select another
disc.
...(p.14)
front
panel
remotecontrol
_eIAVlll,7{eIm,7t_lg_,7t,vlL_[_].lefEllD]
_) GROUP
(p.15)
_) Display
panel
(D PLAY MODE
Press to switch among random play, program play, and
normal play.
_) REPEAT
(p.17)
_) MARKER
•
(p.20)
_) Cursor
_) ON SCREEN
ENTER
(p.21)
Press to turn the on-screen icons on and off on the video
monitor.
_) RETURN
(p.14, 21,25)
Press to go back to the previous screen when operating in
the menu screen.
_) Numeric
A-B (p.18)
buttons,
Use to select and determine an item on menu screen, etc.
buttons
Use to select a title, chapter, track, etc.
1_) SUBTITLE
_1 AUDIO
_) ANGLE
(p.16)
(p.16)
(p.16)
CANCEL
Press to cancel a specific mode or a setting.
_) PAGE (p.15)
_) TOP MENU
1_) DISC 1, 2, 3, 4, 5
Press to go to the initial screen when operating in the menu
screen.
Press to play the disc loaded on the guide of the corresponding number.
_1 MENU (p.14)
1_) SET UP (p.25)
Press to call up menu screen contained in the disc.
Press to call up the setup menu screen.
5
_0
emO
e
e
e
E
......................................
!REP1
solsc MPEGpcM
vss
00
O
®
I), @, Q
®
_) Disc type indicators
One of these numbers lights up to show the currently
selected disc, which is loaded on the guide of the corresponding number.
Indicates the type of disc. For example, DVD and AUDIO
lights up when playing a DVD-Audio disc.
Q GROUP
Lights up during playback.
The current (or programmed) group number appears below
the indicator.
OnD
@ TITLE,
Lights up while playback is paused.
The current (or programmed) title number and chapter
number appears below each indicator. TITLE (or CHAP)
also lights up with REP indicator when repeating a title (or a
chapter).
O PROG
Lights up during program play.
O RND
•
Lights up during random-sequence
play.
O Repeat mode indicators
•
•
•
REP and A-B light up when repeating between the two
points you have specified.
REP and 1 DISC light up when repeating the currently
selected disc.
REP and 5 DISC light up when repeating all the discs
loaded on the disc tray.
O Audio type indicators
dlt_, I'IND (=dolby digital), MPEG, PCM (=linear PCM),
PPCM (=packed PCM):
Indicates the audio format of a disc. When a disc
contains several different formats, the currently
selected format lights up.
MLTCH: Lights up when a multi-channel audio track is
playing.
DMIX:
Lights up to show that the currently playing
multi-channel audio track can be mixed down into
2 channels - does not mean that the track is
VSS:
6
actually down-mixed. With some DVD-Audio
discs, 2 channels down-mix is prohibited and the
indicator does not light up while playing the disc.
Lights up when the virtual surround feature is
turned on.
TRACK
CHAP
_
_
r'd'R
The current (or programmed) track number appears below
the indicator. It also lights up with REP indicator when
repeating a track.
_) Multi-information
display
Shows various information such as title, chapter or track
number, elapsed playing time etc.
_) ANGLE
Lights up when the scene currently played contains different
angle(s).
[]
Turn the remote control over and slide the
battery compartment cover in the direction of
the arrow.
[]
Insert the batteries (AA, R06, UM-3 type)
according the polarity markings on the inside
of the battery compartment.
[]
Close the battery compartment
cover.
_3
If the remote
•
•
•
•
control
operates
only when it is close to the unit, the batteries
are weak. Replace
all the batteries
with new ones.
Use only AA, R06 or UM-3 batteries for replacement.
Be sure the battery polarity is correct. (See the illustration inside the battery compartment.)
Remove the batteries if the remote control will not be used for an extended period of time.
If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with
clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
_"_@@@
0 0 0
.................................
0
Within approximately 6 m
(20 feet)
The remote control transmits a directional infrared beam. Be
sure to aim the remote control directly at the infrared sensor
during operation. When the sensor is covered or there is a
large object between the remote control and the sensor, the
sensor cannot receive signals. The sensor may not be able to
receive signals properly when it is exposed to direct sunlight
or a strong artificial light (such as a fluorescent or strobe
light). In this case, change the direction of the light or
reposition the unit to avoid direct lighting.
• Handle the remote control with care.
• Do not spill water, tea or other liquids on the remote control.
• Do not drop the remote control.
• Do not leave or store the remote control in the following
conditions:
- high humidity or temperature such as near a heater, stove or
bath;
- dusty places; or
- extremely low temperature.
7
m
Never connect this unit and other equipment to power supply until all connections have been completed.
Be sure all connections are made correctly, observing the color-coding of terminals of both this unit and the equipment to be
connected. Also refer to the instructions of the equipment to be connected.
• Digital outputs
This unit hasCOAXIAL and OPTICAL digital output
terminals. Connect one of them to your AV amplifier
equipped with Dolby digital, DTS, or MPEG decoder using
each specific cable (separate purchase).
Required Audio settings (See p.25, 26 and 27):
• Digital Audio Output _ On
• PCM Down Conversion, Dolby Digital, DTS Digital
Surround, MPEG _ Verify your AV amplifier's capability.
Subwoofer
Center speaker
Left main
speaker
Right main
speaker
Leftrear
speaker
Rightrear
speaker
®
®
°,+®®
.....®®
Notes on digital recording
You can record the source from this unit through your AV
center (AV amplifier, etc.) or connecting these terminals
directly to your CD recorder, etc.
• With CD, wait for the total play time to appear before
turning on your recording unit's synchro recording
feature. The beginning may be cut off if you turn it while
'READING' is displayed.
• With DVDs, recording may be interrupted when a new
chapter begins. If it persists, use analog recording by
making analog connections. These phenomena occur
because DVD player must first determine the audio
format and sampling frequency before switching digital
output.
• Analog
outputs
@6CH DISCRETE terminals
This unit incorporates multi-channel decoder and can be
connected to your AV amplifier as an external decoder. With
this connection, you can enjoy a 96 kHz or more sampling
frequency multi-channel audio track on a DVD-Audio disc,
etc. even if the disc is copyright-protected. However, your
AV amplifier's digital sound processing features have no
effect on the audio signals output from these terminals.
Required Audio settings (See p.25, 26 and 29):
• Speaker settings _ Multi-channel*
• Digital Audio Output -* Off
* Also make output mode, delay time and speaker
balance adjustments.
@AUDIO OUT (MIXED 2CH) terminals
You can connect this unit to any component that has analog
2 channel input terminals using the RCA audio cable
supplied with this unit.
8
_'li'li'l_*liPliT
If your AV amplifier
(U.S.A. model)
has video terminals,
connect
amplifier (and then to your video monitor)
use one video monitor for several different
(LD, VCR etc.) by simply
selector
switching
your
so that you can
video sources
the input source
of your amplifier.
This unit has three types of video output
of them in accordance
equipment
terminals.
with the input terminals
Use one
of the
to be connected.
• Do not connect this unit to a video monitor through a video
cassette recorder. If you do so, the picture may not be played back
properly due to the copyright protection technology incorporated
in this unit.
@Component
COMPONENT
VIDEO IN
S VIDEO
INPUT
AV amplifier
reproducing
colors (better performance
connection),
COMPONENT
VIDEO IN
VIDEo
OUT
S VIDEO
IN
VIDEo
IN
achieves
separating
video
color-coded
blue,R,
red). Use commercially
as green),
available
with component
does not have component
terminals,
this unit's
to your video monitor's
better
I
Video monitor
(Y,
component
component
(PB,
cables.
input is
when connect-
ing. If your amplifier
output
output
directly
input can reproduce
video image.
• Do not connect this unit's COMPONENT
I
coaxial
the color of each terminal
connecting
in
than S-video
and color difference
(and Video monitor)
Observe
high fidelity
signal into luminance
terminal
required.
S VIDEO
OUT
terminal
video connection
Amplifier
COMPONENT
VIDEO OUT
Video
Component
VIDEO OUT terminals
to component video input terminals special for HD (HighDefinition) TV.
@S-Video
terminal
S (separate)
video connection
composite
video connection
achieves
a clearer picture
by separating
luminance
when transmitting
signals. Use commercially
available S-video cable. Amplifier (and Video monitor)
S-video
Video
Use RCA video
VIDEO
with
input is required.
_Composite
when
than
color and
cable
connecting
(1, 2)
supplied
with this unit
this unit to a video
1, 2 terminals
of VIDEO
signal. You can connect
supplied RCA cable,
video monitor.
terminal
OUT output
one to your amplifier's
and the other to another
monitor.
the same
input using
amplifier
or a
9
These terminals are used for custom installation system that
transmits remote control signals via cables. Connect this
unit's REMOTE CONTROL IN to the Remote control
output of the control unit of your system.
By connecting this unit's REMOTE CONTROL OUT to
another piece of equipment's Remote control input terminal,
you can also operate that equipment with the system remote
control.
i!iii@i!
After completing all connections, connect the AC power
cord to an AC power outlet.
To ACoutlet
10
To play a disc properly,
equipment
•
connected
you need to adjust
If your AV amplifier
digital
setting).
the formats
of audio and video
signals
output
from this unit in accordance
with the
to this unit. See p.25 to 27.
terminals,
Otherwise,
does not incorporate
please
DTS decoder
make sure that the 'DTS
unprocessed
digital
signals
Digital
and you have connected
Surround'
will be output
at 'Audio'
this unit and the amplifier
SETUP
MENU
and its noise could damage
through
is set to PCM (factory-
your ears and your speakers.
• Preparation
Select DVD as the input source
U
[]
on your AV amplifier.
Press
POWER
to turn the power
Press
-_ (or OPEN/CLOSE)
on.
to open the disc
tray.
4 (PLAY)
[]
Load
discs.
Use the disc guides
(numbered,
1 to 5) to align the
discs correctly.
[]
Press
_ (PLAY).
The disc tray closes and playback
starts. This unit plays
all discs on the tray in sequence.
• If necessary, select a desired disc using DISC SKIP or one of the
DISC 1, 2, 3, 4 or 5 buttons.
• When a menu screen appears _
_
_:
See 'Using a Disc's Menu' in p. 14.
Disc tray
• When
shows
this unit finishes
playing
the menu
and does not start playing
screen
a DVD,
this unit stops playback
or
the next disc.
• This unit cannot play a CD-R or CD-RW
disc unless the disc has
been finalized.
Please make sure to finalize the disc on the CD
recorder
before
playing
it on this unit.
(PLAY)
11
DISC SKIP
PLAYXCHANGE
• To stop playback
Press cl (STOP).
This unit memorizes
where
cl (STOP)
as this unit is turned
on (_
indicator
When
PLAY
STOP
you press
_> (PLAY)
in this status,
as long
on the display).
playback
resumes
from where it was stopped.
To clear the memory,
indicator
press cl (STOP)
once more so that the
goes off.
• Selecting
another
• This function
a disc.
This function
disc cancels
may not work
the resume
with some
function.
discs
plays the first few seconds
or on some part of
of each chapter
from the beginning
of the title up to the memorized
that you can review
previous
Press _> (PLAY)
displayed
• This
DISC SKIP
was pressed
flashes
point so
chapters.
while the message
for chapter
review is
on the screen.
function
• Canceling
function.
may not work
resume
function
with some
• To select a specific
Press DISC
DVDs.
will also clear
the chapter
review
disc
1, 2, 3, 4 or 5.
• You can select another disc by pressing DISC SKIP.
By pressing
PLAYXCHANGE,
and load or replace
However,
inside
never
discs without
interrupting
load a disc on the guide
the unit because
to be placed
you can open the disc tray
the disc currently
play.
half
hidden
being
there.
• After operation
When this unit is not in use, remove
POWER.
12
discs and press
played
is
",g'_F.'q[Olel".J_,7_Wl[elA
PLAY
PAUSE
• To select
a specific
track _
rd'R
Enter a desired track number using numeric buttons.
To select a two-digit number, press >10 and then enter the
upper figure and the last figure successively.
Example
1 Press
2 Press
3 Press
(to select track 17):
>10.
1.
7.
• Search
SKIP/SLOW/SEARCH
Press SLOW/SEARCH c_> (or _<1) on the remote control
to search forward (or backward).
or
Press and hold c_>F_ (or _<1/_<1) on the front panel to
search forward (or backward).
Cursor buttons
(4 >)
• To increase the speed,press SLOW/SEARCH on the remote
control repeatedly or keep pressing _>/_,
_<_/<<_on the front
panel.
• Pause
Numeric buttons
Press 00 (PAUSE).
• To resume play, press _>(PLAY).
• Frame advance/reverse
1
Press 00 (PAUSE) during playback.
2 Press the cursor buttons (<_, _>).
Each press advances (or reverses) still picture by one frame.
• To return to normal play, press _> (PLAY).
• With Video
• Skip
Press
• Slow _
SKIP c_
forward
(or _<1) on the remote
control
to skip
c_>F_
forward
(or _<_/_<1)
(or backward).
Press once for each chapter (track) to be skipped.
control,
skip operation
backward.
_
Press 00 (PAUSE) during playback.
2 Press SLOW/SEARCH c_> (or _<1) on the remote
control.
or
Press and hold c_>/c_ (or _<1/_<1) on the front panel.
on the front panel to skip
• When playing a VCD with playback
not function
as described
above.
move
1
(or backward).
or
Press
CD, you cannot
•
may
To return to normal play, press _> (PLAY).
• To increase the speed,press SLOW/SEARCH on the remote
control repeatedly or keep pressing _>/_,
_<_/<<_on the front
panel.
• With Video
CD, you cannot
move
backward.
13
Discs may contain multiple audio tracks, subtitles, index and bonus materials such as movie trailers and cast information,
And many of them have menu screens that enable you to control these features. This section gives you general instruction
about how to operate
these screens.
However,
the operation
methods
may differ depending
[]
etc.
on the disc.
PressTOP MENU or MENU during playback to
show
•
menu
screen.
With some discs, menu
screen
appears
automatically
when you start playback.
Press the cursor buttons
the desired item.
Cursor buttons
ENTER
IRN
BJ
Press
ENTER
selected
item.
(PLAY)
•
buttons
(£,v,
% _) to select
to go to the screen
item or to start
of the
playing
You may also use the numeric
the selected
buttons
to operate
steps 2 and 3.
• Video CD's playback
If 'PBC'
appears
this unit is in playback
appears
control
on the display
control
on the video monitor.
using the following
while playing
a Video CD,
mode and a menu
You can operate
screen
menu screens
buttons.
Numeric buttons: Press to select the desired item.
RETURN: Press to go back to the previous screen
_> (PLAY): Press to play the selected item
c_: Press to show the next screen
_<1: Press to show the previous screen
D (STOP): Press while a menu screen appears on the video
monitor to cancel the playback control.
• Playback control is automatically
or random-sequence play.
PROGRESSIVE
ON
canceled during program play
This unit's component video outputs are capable of output
progressive signals. You can enjoy even higher quality
picture if you have connected this unit to a monitor that can
receive progressive signals.
Press PROGRESSIVE
(or PROGRESSIVE
ON on the front
panel).
The PROGRESSIVE
•
PROGRESSIVE
To cancel
indicator
this feature,
lights up.
press PROGRESSIVE
again.
indicator
• If the screen
shifts
off center
when
using progressive
'Adjusting
the screen position'
on p.24.
• When playing 4:3 aspect software
with a 16:9 aspect
monitor
using progressive
output,
the picture
output,
see
wide-screen
may appear
horizontally
stretched to fill the screen. In that case, change the
aspect to the correct one at your monitor. If the monitor cannot
change
feature
14
the aspect,
off.
it is recommended
to turn the progressive
",gz l..'q[o,lol ".,l-_l,7_ Wl [ol A
This section explains about some features particular
to DVD-Audio.
Though most of the content selection can be controlled
using a disc's menu like DVD-Video,
there exists in a DVD-Audio
the unit called 'group' that is something
equivalent to
DVD-Video's
'title'.
• To play a track on a specific
[]
group
Press GROUP.
The group and track icons appears on the video
monitor.
[]
Cursor buttons,
ENTER
Numeric buttons
Press the cursor buttons (A,V) to select a
group number and press ENTER.
Press the cursor buttons (A,V) to select a track
number and press ENTER.
The selected track starts to play.
You can also use the numeric buttons to select a group
and a track.
PAGE
GROUP
• To play a bonus group
Some discs contain bonus groups. If it requires 4 digit
password, consult the disc jacket, etc. and enter the
password using the numeric buttons and then press ENTER.
• Tochange pages
DVD-Audio may contain some information screens called
'pages' that show photo galleries, artist biographies and
lyrics, etc. When it appears, you can move to another page
by pressing PAGE (page number appears on the display
when you change pages.).
• Some discs may navigate you to press the cursor buttons
(<_, _>) to turn pages.
VIDEO OFF
You can enjoy even higher quality sound by turning off the
video signal output.
Press VIDEO OFF.
Picture is turned off and the VIDEO OFF indicator lights
up.
• To cancel this feature, press VIDEO OFF again.
• While you pause or search play, this unit outputs the
video signal and the picture is shown on the video
monitor.
VIDEO OFF indicator
15
Some discs are encoded
gual subtitles
etc. to see which
AUDIO
_LE
A,V, _>
RETURN
with several
or multiple
camera
feature
audio
angles.
tracks,
multilin-
Refer to disc jacket
is supported.
• Audio tracks
Different audio track languages and/or
selected if available on the disc.
Press AUDIO
The Audio
•
formats
can be
during play.
track icon appears
on the video monitor.
Pressing the button repeatedly
toggles through all audio
tracks recorded on the disc. You can also use the cursor
Numeric buttons
buttons (A,V) or the numeric buttons to change tracks.
You can also use the button to turn the vocals on and off
•
on karaoke
• Play restarts
discs.
from
See the instruction
the beginning
of each disc.
of the current
track
if you change
audio track while playing DVD-Audio,
other than video section.
• With DVD-Audio,
track number 2 may appear even if the disc
does not support
multiple
audio
tracks.
• Subtitles
Press
AUDIO
DVD-Audio
DVD-Video
SUBTITLE
•
the button repeatedly
toggles through all
recorded on the disc. You can also use the cursor
Pressing
subtitles
buttons
Currently playing audio track
number
play.
icon appears
on the video
(A,V) or the numeric
To turn on/off
Selected audio track number
- can be switched to 2 even if the
audio track does not recorded on
the disc.
during
The subtitle
monitor.
buttons
to change
subtitles.
the subtitles:
_Jl
Press SUBTITLE.
[]
Press the cursor
button
[]
Press the cursor
buttons
(_).
(A,V) to select
ON
and OFF.
SUBTITLE
• '- -' appears
• Subtitles
if the disc does not have a subtitle.
may not change
immediately
after
you press
the button.
• Angles
Some DVDs
angles
ove you
Jet'aime
have scenes
so that different
playback.
ANGLE
a scene encoded
encoded
viewpoint
lights
with multiple
camera
can be selected
during
up on the front panel display
with multiple
angles
while
is being played.
Subtitle language number being played
Press ANGLE
ANGLE
while ANGLE
lights up.
The angle icon appears
•
Pressing
recorded
on the front panel display
on the video monitor.
the button repeatedly toggles through all angles
on the disc. You can also use the cursor buttons
(A,V) or the numeric
buttons
to change
angles.
• To turn the icon off
Press RETURN.
Angle number being played
• With
angles
menu
16
some
discs,
in the way
and change
you cannot
described
them.
change
above.
audio
tracks,
In that case,
subtitles
or
go to the disc
This function allows you to play your desired chapter, track
or disc repeatedly.
•
t
®
°+
t
TRM,+
_.r.,
..... +.+r.r
,..,,.. ,..,EM ..l
,I'
$
+J.+I...r. r...r,r EA I J
#
@ CHAPTER REPEAT: The current chapter is played
repeatedly.
@ TITLE REPEAT: The current title is played repeatedly.
@ ALL REPEAT: All the discs loaded on the tray are
played repeatedly.
@ REPEAT OFF: Repeat play mode is canceled.
""+
. +..:,
....L: R""'-'
.r.r .r.A'1"
""
or
m+
'-"-._r+
.....
'-" "-r r+..r,r'-""'-'EAT
l
t
@
r+..c:r E A ]" ,_,rF
!
'REP' goes off.
I
Press REPEAT during playback.
Each time this button is pressed, repeat mode changes
as follows. The name of the selected repeat mode
scrolls once on the multi-information display and the
corresponding indicators light up.
®
r+.m
r EA']"
I
I r
F
'REP' goes off.
@ TRACK REPEAT: The current track is played repeatedly.
@ DISC REPEAT (Video CD, CD): The current disc is
played repeatedly.
or
GROUP REPEAT (DVD Audio): The current group is
played repeatedly.
@ ALL REPEAT: All the discs loaded on the tray are
played repeatedly.
@ REPEAT OFF: Repeat play mode is canceled.
I
Pressing REPEAT while playback is stopped switches 'ALL
REPEAT' to 'REPEAT OFF' or vice versa.
Program
repeat
J. £"EF
....
Random-sequence
r+.+r.""""F'
EA]++
repeat
IR M".....
_.r... r+..r,
""" r""Ei=11
"
!
!
r+.mr EA '1" urF
I
r+.m
r EA']"
I
I
I r
F
• Program
repeat _
_
r'd'R
If REPEAT is pressed during programmed play (p. 19),
repeat mode changes as follows.
@ 1 STEP REPEAT: Repeating the track being played
@ ALL REPEAT: Repeating all the programmed tracks
@ REPEAT OFF: Canceling repeat mode (go back to
normal program play)
• Random-sequence
repeat
If REPEAT is pressed during random play (p. 18), repeat
mode changes as follows.
@ TRACK REPEAT: Repeating the track being played
(0} ALL REPEAT: Playing all the tracks repeatedly, each
time in different random-sequence.
@ REPEAT OFF: Canceling repeat mode (go back to
normal random play)
• Repeat play may not work properly with some DVD-Video.
• Repeat play does not work with an interactive DVD-Video or
during menu play of a VCD with playback control.
17
This function allows you to specify
between them repeatedly.
[]
Press A-B during
A-B
two points and play
play at the point where
want to start A-B repeat.
'REP' and 'A-' light up and 'B' flashes
[]
Press A-B at the point where
you
on the display.
you want
to end
A-B repeat.
'REP'
and 'A-B'
of the section
appear
between
on the display
and repeat play
point A and B starts.
• To cancel A-B repeat
Press A-B repeatedly
off.
,REP
Lights up
until A-B indicator
on the display
goes
A::i
Flashes
2
_REP
• This function may not available with some DVD-Video.
• This function works only within a title (DVD-Video) or a track
(VCD, CD).
A-B
Lights up
When you select this mode, this unit plays all tracks on all
discs loaded on the disc tray in random sequence.
PLAY MODE
[]
Press D (STOP) to stop play.
[]
Press PLAY MODE repeatedly until 'RND' lights
up on the display.
[]
Press E>(PLAY) to start random play.
• To cancel
(STOP)
E>(PLAY)
........ i
Random play is suspended.
Press PLAY MODE once.
RND indicator
goes off.
If you press _> (PLAY)
from the beginning
Lights up
canceling
Opening
When
loaded,
18
mode
1 PressD (STOP)twice duringplay.
2
RND
random
random
successively,
playback
starts
before
mode.
the disc tray also cancels
this unit is in random
playback
normal
of the disc having been played
control
mode
is canceled
this mode.
while
a Video
during
CD (ver.2.0)
random
play.
is
_'.]".t,_W l _, _ hV[eB jI_l,_B".if ,_| "dF;'.]
_[e ]lJ,_lA_
[W
You can enjoy listening to your favorite tracks selected from
one or more discs in any desired order by programming
tracks.
PLAY
[]
Press D (STOP) to stop play.
[]
Press PLAY MODE repeatedly until PROG
lights up on the display.
The display shows the step information.
[]
Press DISC l m5 to select the disc.
• When programming DVD-Audio, press GROUP to
specify the group.
[]
Press numeric buttons to select the track.
buttons
('_, _)
(PLAY)
•
•
•
•
2
1
2_)4
5
GROUP
DVD
AUDIO
PROG
TRACK
p.%
,,
,,.%
,!
i"" ;; U .L
.....
Repeat steps 3 and 4 to program other tracks in your
desired order.
See p. 13 about how to enter the track with numeric
buttons.
To program a whole disc (or all tracks of the
selected group of DVD-Audio), press ENTER
('ALL' appears on the display).
Pressing El (STOP) cancels all tracks programmed
so far.
You can program up to 32 tracks to be played in desired
order. 'FULL' appears on the display when the number of
tracks exceeds 32.
[]
Press _ (PLAY) to start play.
Selected disc
• To cancel
4
_-_)2 3045
_, _DVD
,1
T_CKP.00
.....
Group No.
,",
the programmed
tracks
1
Press the cursor buttons (<_, _>) to select the track you
want to cancel.
2 Press CANCEL.
,",
Track No.
When you program a track of a Video CD (ver.2.0), playback
control is canceled during programmed play.
• To exit programming
mode
Press PLAY MODE twice or open the disc tray.
19
This feature allows you to mark up to 5 points
can quickly return to those points later.
[]
MARKER
Press
MARKER.
The marker
[]
Cursorbuttons(_,_),
ENTER
icon appears
Press the cursor
of five asterisks.
The selected
[]
Press
on the screen.
buttons
asterisk
(<_, E>) to select
one
is highlighted.
ENTER.
The selected
asterisk
turns to be the bookmark
• To recall a bookmarked
Press the cursor buttons
number
so that you
number.
scene
(<_, _>) to select
a bookmark
and press ENTER.
• To clear a bookmark
Press the cursor buttons
number
When you open
cleared.
Bookmark number
20
(<_, _>) to select
a bookmark
and press CANCEL.
the tray or turn this unit off, all bookmarks
are
You can control various items using on-screen menu bar.
[]
Press
ON SOREEN.
Each time ON SCREEN is pressed, the menu bar
changes as below.
@ Icons for disc menu
@
@ Icons for player menu
,I,
@ Shuttle screen
Off
Off
Icons for player menu
[]
t
t
Press the cursor buttons (% _) to
item you wish to adjust.
The selected item is highlighted.
• Icons for player menu has 4 different
below. To switch the menu bar, select
icon and then press the cursor buttons
select the
menu bars as
the leftmost
(A,V).
i @ Play menu
t
@ Diisplay menu
@ Audio menu
@ Video menu
[]
Cursor buttons,
ON
JRN
Numeric buttons
Press the cursor buttons (A,V) to change
setting.
• With some items, you need to press ENTER or _>
(PLAY) to determine the setting.
• You can also use the numeric buttons when entering
numbers to select a chapter, etc.
• You can also use RETURN to turn the screen off.
• A and V around the icon means that the item can be
changed using the cursor buttons (A,V).
• Some items cannot be accessed when the play is stopped.
• To change
the menu bar position
When the menu bar does not appear properly, you can adjust
its position.
[]
Select the rightmost icon (_]).
[]
Press the cursor buttons (A,V) to move the
menu bar.
21
_e]A_5.'f_]:t:l:hV|l_l:hVll
example: DVD-Video
Title
Angle number
number
Track
number
Playback
Chapter
Indicates
or off.
number
Group
number
Page
control
whether
playback
control
is on
number
[] Language
Time
index
(hour:minute:second)
You can start play from
by specifying
Changing
the elapsed
the time
Track
elapsed
Track
remaining
point
time.
display
time
time
Disc remaining
Audio
the desired
_
English
French
DEU:
German
ITA:
Italian
ESP:
NLD:
Spanish
Dutch
SVE:
Swedish
NOR:
DAN:
Norwegian
Danish
CHI:
KOR:
Chinese
Korean
POR:
RUS:
Portuguese
Russian
MAL:
VIE:
THA:
Malay
Vietnamese
Thai
JPN:
Japanese
*:
Others
[] Signal type/data
LPCM_PCM/[]RDigital/DTS/MPEG:
k (kHz):
Sampling frequency
Number of bits
b (bit):
Number of channels
ch (channel):
time
mode
LR _L
ENG:
FRA:
R
Signal type
Example:
•3/2_. 1.,_ch
1 : Subwoofer
@ Audio
track
number
@ Audio
track
Language:
See []
@ Audio
Karaoke
for language
signal
type:
vocal
(not displayed
abbreviations.
See []
for details.
on/off
(Karaoke DVD only)
Solo: OFF or ON
Duet: OFF, VI+V2,
on/off
• Display
@ Subtitle
language
• Time remaining
Slow-motion play
<1: Backward _
_
t
I
Search
<4: Backward
• Slow-motion only works on the video parts of DVD-Audio.
22
1 : Rear channel
(monaural)
2: Rear channels
(left/right)
1 : Main
channel
(monaural)
2: Main
channels
(left/right)
3: Main
channels
(left/right)
may differ in accordance
random-sequence
'
is no subwoofer
not available
signal)
on the disc
+ Center
V1 or V2
@ Subtitle
,
if there
0: Rear channel
on the disc does
play.
Pause
,_,
'_T _'
Play
t
I
Search
kJ': Forward
,
'
with the disc's
not appears
specification.
during
program
or
• Play mode menu
• Audio menu
example: DVD-Video
example:
DVD-Video
A-B repeat (_ p.18)
[ENTER] (start point) _ [ENTER] (finish point)
To cancel
Virtual
[ENTER]
surround
Bookmarks (_ p.20)
You can mark up to 5 points.
To mark a point
[<_,_>] _ [ENTER] (at the desired point)
with multi-channel
mode
you to enjoy
speakers
with some
connecting
discs).
surround-like
when
[4, _] _ [ENTER]
HP (with
menu
(may
not effective
the feature
to your AV amplifier.
speakers):
MPEG,
LPCM
multi-
headphones):
Dolby
source
[<_,E>]_ [CANCEL]
without
a disc encoded
audio track
Dolby Digital, DTS,
channel source
To erase a bookmark
effect
playing
You can also enjoy
headphones
SP (with main
To recall a bookmark
• Display
surround
Allows
Digital,
MPEG,
LPCM
multi-channel
SP/HP
OFF:
SP/HP
1 : Virtual
surround-on
SP/HP
2: Virtual
surround-enhanced
Virtual
surround-off
example: DVD-Video
Cinema
dialog
Increases
(center
the volume
level of the dialog
part
channel).
IPB display
Displays
picture
ON _
the picture
type (I/P_)*
of a still
(when paused).
OFF
• Turn off the sound
Display
dimmer
Changes
the brightness
BRIGHT
_
• Audio output from this unit is 2-channels
surround
is turned on.
of the front
panel
DIM
_
dims
and any indicators
display
effect
when
of the AV amplifier,
this unit when turning on the virtual surround.
• Turn the virtual surround off if it causes sound
the virtual
etc. connected
to
distortion.
AUTO*
t
The display
on turn off during
play.
and the indicators
light up temporarily
you perform
* 'I' (intra
coded
picture)
one and has greater
'P' (predictive
coded
between
adjusting
'I' and 'P'.
video
that the picture
of information
picture)
(bidirectionally-predictive
that
were
brightens
when
an operation.
indicates
amount
The display
is made
coded
from
picture)
It is recommended
is the original
than that of 'P' or 'B'.
'I' and 'B'
is to fill in the space
to use 'I' picture
for
image.
23
When PROGRESSIVE
Digital picture mode
To select the picture mode: [£,V]
N: Normal
models)
Digital picture mode
To select the picture mode: [£,V]
N: Normal
C: Cinema image (suited for movie viewing)
U: User mode
C: Cinema image (suited for movie viewing)
To change the user mode
1 Select User mode and press E>
2 Press (<_, E>)to select the item you wish to
change.
3 Press (£,V) to change the setting.
The following items are also displayed when
'ou select 'U'.
Contrast
is on (U.S.A. and Canada
Transfer MODE
Selects the method of conversion for progressive
output to suit the type of material being played.
Auto (normal): for viewing film material
Video: for video material
(-7 to +7)
Adjusts the contrast between light and dark
part of the picture.
Brightness
(0 to +15)
Adjusts the brightness of the picture.
Sharpness
Adjusts
(-6
to +6) (Australia
the horizontal
model)
resolution
of the
picture.
Color
(-7
Adjusts
• Adjusting
(U.S.A.
to +7)
the shade
the screen
and Canada
the screen
position,
follow the below method.
1
Press
GG(PAUSE)
2
Follow
3
Press
4
Adjust
_> to select
position
color.
(when using progressive
output)
models)
With some video monitors,
the steps
of the picture's
to pause
may shift off center with progressive
signals
output
from this unit. To adjust
the
(press
so the
play.
1 and 2 on 'Operating
the rightmost
menu bar' on p.21 to show the video
menu.
icon ([_).
the position.
To move to the left, press
To move to the right, press
the numeric
button
the numeric
To set the screen back to the original
button
position,
1.
3.
press the numeric
button
2.
Example:
i I
Press []
right.
You can check whether
indicator turns off).
5
Save the adjusted
to move to the
the picture
is in the center
or not by switching
to normal
output
PROGRESSIVE
position.
First press D (STOP)
and then press SET UP to show
setup menu.
Then press
the position
Even if you skip this procedure,
the position
is saved until you turn the power
24
is saved.
SET UP once again (or RETURN)
off.
and now
With the setup menu, you can change this unit's system defaults to suit your preference and your home theater system. Some
items must be adjusted to play a disc properly.
This section shows common procedures (some items require
additional steps). Use the remote control to operate the
setup menu.
[]
ENTER
IRN
Press SET UP while playback is stopped.
The menu screen appears on the video monitor.
IVJ Press the cursor buttons (% _) to select a
menu group.
There are five menu groups. The screen shows the
items that belong to the menu group of the selected tab.
Disc menu @
Video menu @
Audio menu @
Display menu @
Others menu @
Ire] Press the cursor buttons (&V) to select the
desired item and press ENTER.
[]
Press the cursor buttons (A,V) to change the
setting and press ENTER.
• To go back to the previous
screen
Press RETURN.
€
®
• To get out from the setup menu mode
Press SET UR
€
®
€
€
25
I_l=ilq_l'tl_ff|=
The below chart
shows the menu groups
and each items.
In the 'Options'
column,
the factory
settings
are underlined.
Menu
Items
groups
Disc
See
Options
Audio _
(U.S.A.
and Canada
Select the preferred audio track language.
models)
French
Spanish
Original
German
Italian
Other****
p.27 and
28 for
details.
(Australia
model)
French
Spanish
Subtitle _
Select the preferred subtitle language.
Original
(U.S.A. and Canada
Automatic
English
Other****
(Australia
Automatic
Italian
Menus _
Select the preferred disc menu language.
Other****
models)
French
model)
English
Spanish
Spanish
French
Other****
German
(U.S.A.
and Canada models)
French
Spanish
(Australia
model)
French
German
Spanish
Other****
Ratings
Set a ratings level to limit DVD-Video play. See p.28 for details.
Setting ratings (When
8 No Limit
1 to 7
Other****
Italian
level 8 is selected)
0 Lock All
Changing
ratings
(When level 0--7 is selected)
Unlock Player
Change Level
Change Password
Temporary
Unlock
Video
TV Aspect
If you connect to a 4:3 conventional-type
monitor, select '4:3
Pan&Scan'
(left and right sides trimmed
when playing
16:9 software)
or
'4:3 Letterbox'
(black areas appear at the top and bottom when playing
16:9 software).
Select ' 16:9' if you connect to a widescreen
monitor.
4:3 Pan&Scan
4:3 Letterbox
16:9
Still Mode
Automatic
Field
Frame
Specify the type of picture shown when paused. First select 'Automatic'.
If a still picture jitters, select 'Field'.
If details don't appear clearly
enough, select 'Frame'.
Black
Level
Control
(U.S.A.
and Canada
models)
Darker
Change the black level of the picture. Select 'Lighter'
when you connect
to the monitor using VIDEO or S VIDEO terminal.
Select 'Darker'
when using COMPONENT
terminals.
NTSC Disc Output
(Australia
model)
Select video signal format (PAL 60 or NTSC)
NTSC disc.
Audio
Speaker
Setting
Adjust the settings
environment
DISCRETE
to suit your
audio system
PAL 60
to be output
and your
when you connect to your AV amplifier
terminals. See p.29 for details.
when
Multi-channel:
Select this when
listening
using
NTSC
playing
connected
to multi-channel
system. There are three sub-items
• Speaker presence
and size
6CH
as below.
• Delay time
• Channel
balance
2-channel:
Select
PCM
Down
Conversion
[_
[_
Select how to output the high sampling-frequency
audio
disc that is not copyright-protected.
See p.28 for details.
26
No
signals
on a
this when
connected
Yes
to 2-channel
system.
q_lq@'_FlflI
Menu
Items
groups
Audio
Dolby
Decide
Digital _
the signal type that output
'Bitstream'
when connected
'PCM' when not.
Options
Bitstream
from
device
this unit's
has Dolby
digital
Digital
outputs.
decoder.
PCM
Select
Select
DTS Digital Surround
_
Decide the signal type that output from this unit's digital outputs. Select
'Bitstream'
when connected
device has DTS decoder. Select 'PCM'
when not.
PCM
Bitstream
MPEG
PCM
Bitstream
_
_
(Australia
model)
Decide the signal type that output from this unit's digital outputs. Select
'Bitstream'
when connected
device has MPEG decoder. Select 'PCM'
when
not.
D. Range Compression
[_
[_
(Dolby Digital only)
Change the dynamic range for late night viewing.
Select
easier to hear dialog etc. even at low volume level.
Audio
during
Search
_
'On'
to make
Off
On
On_
off
it
_
Select whether to have sound during search. Select 'Off' if sound
distorted when searching
with Dolby Digital or DTS material. With
DVD-Audio,
the sound may be heard even if you select 'Off'.
Display
Menu Language
Select the preferred
Others
for on-screen
messages
and setup
menu.
U.S.A. and Canada models)
FranFais
Espafiol
Australia model)
Fran_ais
Deutsch
Espafiol
On-Screen Messages
Select whether to show on-screen messages or not.
On
Off
DVD-Video Mode
Decide whether to play a DVD Audio disc with DVD Video contents as
a DVD Video disc or not.
Off
On
Demo
A demonstration of the unit's on-screen displays starts when you select
'On'. The demonstration stops when you press a button and the setting
reverts to 'Off'.
Off
On
If you set to 'Original'
need to select
Language
language
at Audio,
a four-digit
Subtitle
number
or Menus,
of the desired
the original
language
language
of each disc is selected.
from the list below
Italiano
If you set to 'Other',
and enter with numeric
you
buttons.
code list
6565: Afar
6566: Abkhazian
6570: Afrikaans
6577: Ameharic
6582: Arabic
6583: Assamese
6588: Aymara
6590: Azerbaijani
6665: Bashkir
6669: Byelorussian
6671 : Bulgarian
6672: Bihari
6678: Bengali; Bangla
6679: Tibetan
6682: Breton
6765: Catalan
6890:
6976:
6978:
6979:
6983:
6984:
6985:
7065:
7073:
7074:
7079:
7082:
7089:
7165:
7168:
7176:
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
7285:
7289:
7365:
7378:
7383:
7384:
7387:
7465:
7473:
7487:
7565:
7575:
7576:
7577:
7578:
7579:
Hungarian
Armenian
Intertingua
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
7679:
7684:
7686:
7771:
7773:
7775:
7776:
7778:
7779:
7782:
7783:
7784:
7789:
7865:
7869:
7876:
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
8084: Portuguese
8185: Quechua
8277: RhaemRomance
8279: Romanian
8285: Russian
8365: Sanskrit
8368: Sindhi
8372: Serbo-Croatian
8373: Singhalese
8375: Slovak
8376: Slovenian
8377: Sanoan
8378: Shona
8379: Somali
8381: Albanian
8469:
8471:
8472:
8473:
8475:
8476:
8479:
8482:
8484:
8487:
8575:
8582:
8590:
8673:
8679:
8779:
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Tonga
Turkish
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnanese
Votapfik
Wotof
6779:
6783:
6789:
6865:
6869:
7178:
7185:
7265:
7273:
7282:
Guarani
Gujarati
Hausa
Hindi
Croatian
7583:
7585:
7589:
7665:
7678:
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
7879:
7982:
8065:
8076:
8083:
Norwegian
Oriya
Punjabi
Polish
Pashm, Pushto
8382:
8385:
8386:
8387:
8465:
8872:
8979:
9072:
9085:
Xhosa
Yoruba
Chinese
Zulu
Corsican
Czech
Welsh
Danish
German
Selecting audio, subtitle or disc menu language is a disc-dependent
does not have it.
Serbian
Sundanese
Swedish
Swahili
Tamit
matter. The language selected at the setup menu is not effective if a disc
27
Depending on software capability, you can prevent discs or scenes with objectionable material from being played according to your desired rating. You can select
the level and lock it by designating password.
Level 8
All DVDs can be played.
Level 7 to 1
Level of restriction becomes severer as the
number gets smaller.
ENTER
Level 0
• Setting
Numeric buttons
All DVDs cannot be played.
method
_Jl
Follow steps 1 to 4 of 'Operating
select the desired level.
the Setup
Menu'
(see p.25) to
[]
Enter 4-digit number with numeric buttons and press ENTER.
• Press CANCEL if you want to re-enter other number.
The screen that confirms your password appears. Do not forget your
password.
Press ENTER.
When you select a disc that exceeds the rating you have set, a message appears on
the monitor. If you want to play the disc, select 'Yes' and enter your password.
The unit unlocks the setting. It will be locked again by selecting another disc,
opening the disc tray or turning the unit off.
• To change
You must enter
settings
your designated
to 8), change the level, change
selected disc.
Select
Decide
whether
with the capability
to output
high-quality
of the connected
•
If your AV amplifier
•
If not, select
digital
signals
and then follow
(sampling
frequency
when you unlock
or unlock
each procedure
appears
the player
the playback
(level is set
of currently
on the screen.
of 88.2 kHz and 96 kHz) or not, in accordance
component.
etc. is capable
'Yes' so that digital
'Ratings'
password
the password,
of handling
output
signals
high-rate
sampling
are converted
frequency
digital
signals,
select
'No'.
to 48 kHz or 44.1 kHz.
• If a disc is copy-right protected or has a sampling frequency of 176.4 kHz or more, signals are automatically converted to either 48 kHz or
44.1 kHz.
If you wish to enjoy multi-channel sound reproduction connecting this unit's 6CH
DISCRETE output terminals to your amplifier etc., you need to select 'Multichannel' and make following adjustments. Also, set your amplifier's input mode to
analog.
ENTER
28
• Output
i Mai
i
mode @
Change the settings of each speaker in accordance with your speaker system.
Exit
_11 Press the cursor buttons (<, c_, A,V) to select a speaker and press
ENTER.
[]
Example: Left surround (rear) speaker
@ when the speaker is not used
@ when using a large speaker capable of low-frequency (under 100 Hz)
output.
@ when using a small speaker that is not capable of low-frequency output.
Test signal
(L)@(L)@@
Press the cursor buttons (A,V) to select the setting and press
ENTER.
Rear
(R)@(R)@!i
i iSubwoofer
@ @
i
i
The L and R (left and right main speakers) settings are automatically decided by
the SW (subwoofer) setting.
• Delay time @
To obtain the maximum effect of Dolby Digital 5.1 channel source, all speakers
should be located at the same distance from the listening position. However, in
many cases they are not the center speaker is placed in line with the main
speakers, etc. You can virtually increase the distance of the center and rear
speakers by adjusting the delay time.
@
[ ......
1
[]
Press the cursor buttons (% c_, A,V) to select a 'ms' box and
press ENTER.
[]
Press the cursor buttons (A,V) to adjust the delay time and press
ENTER.
• Speaker
balance
@
You can adjust the output level of each effect speakers (center, surround L_)
using the test tone.
[]
Center
speaker
Difference
•
Press the cursor buttons (<, c_, A,V) to select 'Test' and press
ENTER.
The test tone is one speaker at a time in below order, starting with the left
main speaker.
Setting
Approx. 50 cm (1 1/2 feet)
1.3 ms
Approx. 100 cm (3 feet)
2.6 ms
Approx. 150 cm (5 feet)
3.9 ms
Approx. 200 cm (6 feet)
5.3 ms
L _C
[]
_R
_
RS _
LS
I
Listening to the test tone, press the cursor buttons (A,V) to adjust
the volume of effect speakers and press ENTER.
The value in the 'dB' box changes.
Rear speakers
Difference
Setting
The subwoofer cannot output the test tone. Play something and retum to this screen to adjust
the output level of the subwoofer.
Approx. 200 cm (6 feet)
5.3 ms
Approx. 400 cm (12 feet)
10.6 ms
• To exit the speaker
Approx. 600 cm (18 feet)
15.9 ms
Press the cursor buttons (<_, E>,A,V) to select 'EXIT' and press ENTER.
• These
adjustments
adjustments
• These
PPCM
are not effective
at your
adjustments
indicator
setting
on digital
mode
signal
output
from
this unit.
Make
amplifier.
may not be effective
lights
up or DMIX
when
indicator
the disc's
turns
original
sound
design
is protected.
off in that case.
29
If this unit fails to operate
normally,
is not listed in the PROBLEM
center.
check the following
column,
PROBLEM
This unit
on when
switch is
This unit
normally.
fails to turn
the POWER
pressed.
does not work
Playback does not
start.
disconnect
POSSIBLE
The power cord
is not completely
to determine
the fault can be corrected,
your authorized
WHATTO
or the plug
Firmly
connect
the power
YAMAHA
Refer to
Page
DO
cord.
The disc is damaged.
Check the disc carefully; replace it if
necessary.
There
Wait 1 to 2 hours after switching the unit on
before trying to play a disc.
is moisture
on the laser pickup.
Reload the disc with the label side facing up.
Clean the disc.
The disc is dirty.
Incorrect video connections.
Connect this unit and other equipment
properly.
Input selection
video monitor
unit.
Set the input to the right position.
at your AV amplifier
or your
is not the one connected
to this
VIDEO
OFF is functioning.
(U.S.A.
and Canada
or if the fault
dealer or service
Turn the power off and disconnect the power
cord. After about 30 seconds have passed,
connect the power and operate the unit again.
by an external shock
static electricity,
etc.)
The disc has been loaded upside down.
No picture.
whether
CAUSE
is not connected
inserted.
This unit is affected
(lightning,
excessive
incorrect
operation,
points
the power code and contact
3
9
Press VIDEO OFF to cancel the feature.
15
Select the right position. However, it may be
difficult to adjust many DVD-Videos'
widescreen format to fit perfectly in your 4:3
video monitor.
26
Connect this unit's video outputs directly to
your video monitor or to your AV amplifier
and then to a video monitor.
9
Turn off the PROGRESSIVE
feature.
14
Turn off the PROGRESSIVE
feature.
14
models)
If you play PAL system DVD-Audio,
'This
disc is PAL system. The output is sound only'
may appear on the monitor. Picture is not
available
because the disc's video signal
system is different.
Picture appears
incorrectly.
Incorrect
'TV aspect'
setting.
A VCR is connected between this unit and
the video monitor.
(U.S.A. and Canada models)
PROGRESSIVE
is turned on even though
connected
monitor cannot receive the
progressive
(U.S.A.
the
signals.
and Canada
models)
Due to the editing method or material used on
a DVD, ghosting
may occur with progressive
output.
Play is delayed, or
starts at the wrong
place.
This unit does not
recognize discs ('No
disc' appears on the
display, or the display
shows the status when
no disc is loaded).
The disc may be scratched
No sound.
Incorrect cable connections.
Connect the cables properly. If the problem
persists, the cables may be defective.
8
Incorrect amplifier operation.
Set the amplifier controls to the correct input
selection.
--
30
The disc(s)
is not placed
or damaged.
properly.
Place
the disc(s)
correctly
along
the guide(s).
IiloIq'l_-'Flil,
l,llli'l_
PROBLEM
POSSIBLE
CAUSE
No sound when playing
a disc encoded with
DTS.
Incorrect setting(s) at the audio section of
'Setup menu' on this unit or at 'input mode'
on your amplifier.
No sound from
speakers.
With some DVD-Audio,
specified by the disc.
some
Refer to
Page
WHAT TO DO
Select proper settings.
26, 27
output channels are
Incorrect 'Speaker settings'. (when 6CH
DISCRETE outputs are connected to your
amplifier)
Change the settings to suit your speaker
system.
29
Audio output form this unit becomes two
channels when the virtual surround feature is
Turn virtual surround mode off.
23
Turn virtual surround mode off.
23
on.
Sound distorted.
Virtual surround effect is emphasized
much.
Sound 'skips'.
This unit is being subjected to vibrations or
impacts.
Relocate the unit.
too
The disc is dirty.
Clean the disc.
3
Sound 'hums'.
Incorrect cable connections.
Securely connect the audio cables. If the
problem persists, the cables may be defective.
8
Noise from a nearby
tuner.
The tuner is too close
Place the tuner and the unit farther apart.
Noise from inside of
the unit.
The disc maybe warped.
Replace the disc.
The remote control
does not work.
The batteries are weak.
Replace all batteries with new ones.
Relocate the unit.
7
Audio track and/or
subtitle language is not
the selected one.
The disc does not contain the language you
have selected.
No subtitles.
The disc does not have subtitles.
Show subtitles by pressing SUBTITLE or
using on-screen menu.
16
to the unit.
Direct sunlight or lighting (from an inverter
type of fluorescent lamp, etc.) is striking the
remote control sensor of this unit.
Subtitle is turned off.
Angle cannot be
changed.
The disc or the scene being played does not
support multi-angle.
The password for
setting parental level
has been forgotten.
• Returning
While playback
'Initialized'
7
Clear all settings on the setup menu. See
'Returning setup menu to the factory-setting'
below this table.
setup menu to the factory-setting
is stopped,
appears
press and hold 00 (PAUSE),
on the video monitor.
All settings
and then DISC
SKIP and PLAYXCHANGE
on the setup menu return
to the factory
on the front panel until
settings.
31
• Audio section
Frequency
• General
response
Power
supply:
DVD (48 kHz sampling):
.........................
2 Hz to 22 kHz
[U.S.A.
DVD (96 kHz sampling):
.........................
2 Hz to 44 kHz
[Australia
DVD Audio
(192 kHz sampling):
CD, Video CD:
.............
..............................................
2 Hz to 88 kHz
Power
and Canada
model]
consumption:
models]
.......................
120 V, 60 Hz
.........................................
240 V, 50 Hz
.....................................................
21 W
2 Hz to 20 kHz
Laser pickup:
Harmonic
distortion
S/N ratio:
Dynamic
+ noise
(1 kHz): .......................
.................................................
%
115 dB (Weighted)
range
DVD (48 kHz, 24 bit): ..........................................
CD, Video CD: .......................................................
Output
0.002
level (1 kHz, 0 dB): ......................................
103 dB
99 dB
output:
S VIDEO
......................................................
CLASS II
..........................
Max. 1.0 mW (Continuous)
Output value determined
SUBCHAPTER
J
Dimensions:
...............................................
435 (W) x 116 (H) x 404 (D) mm
.............................
1 Vp-p (75 £2)
..................................................
PAL .........................................................
COMPONENT
VIDEO
x 15-7/8")
6.2 kg
(13 lbs 10 oz)
1 Vp-p (75 £2)
RCA pin cable (audio/video)
Remote control
Batteries
C output:
NTSC
x 4-1/2"
........................................................................
Accessories:
....................................................
.....................
665 nm
by 21 CFR CHAPTER1,
(17-1/8"
Weight:
output
Y output:
..........................................................
Laser power
Laser output
2+0.3 V
• Video section
VIDEO
Wave length
(AA, R6, UM-3)
0.286 Vp-p (75 £2)
0.3 Vp-p (75 £2)
output
Y output:
....................................................
PB output:
................................................
0.7 Vp-p (75 £2)
1 Vp-p (75 £2)
PR output:
................................................
0.7 Vp-p (75 £2)
@YAMAHA
YAMAHA
YAMAHA
YAMAHA
YAMAHA
ELECTRONICS
CORPORATION,
USA 6660 ORANGETHORPE
AVE,, BUENA PARK, CALIE 90620, U.S.A,
CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH,
ONTARIO M1S 3R1, CANADA
ELECTRONIK
EUROPA G.m.b.H. SIEMENSSTR.
22-34, 25462 RELLINGEN
BEI HAMBURG,
ER. OF GERMANY
ELECTRONIQUE
FRANCE S.A. RUE AMBROISE
CROIZAT BP70 CROISSY-BEAUBOURG
77312 MARNE-LA-VALLEE
YAMAHA
YAMAHA
YAMAHA
ELECTRONICS
(UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH
ROAD WATFORD, HERTS WD1 7JS,
SCANDINAVIA
A.B. J A WETTBRGRENS
GATA 1, BOX 30053, 400 43 VASTRA FROLUNDA, SWEDEN
MUSIC AUSTRALIA
PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE,
3205 VIC. AUSTRALIA
ENGLAND
CEDEX02,
FRANCE
YAMAHA CORPORATION
Printed in Malaysia
lid
_
V816670