00cv_DV-C6860_G.fm Page 1 Thursday, March 30, 2006 5:04 PM
G
DVD CHANGER
LECTEUR DE DVD CHANGEUR
DV-C6860
DV-C6860
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
2006
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
Printed
in China
3139 245 21861
Important notes for users in the
U.K.
Mains plug
This apparatus is fitted with an approved 13
Amp plug. To change a fuse in this type of plug
proceed as follows:
1 Remove fuse cover and fuse.
2 Fix new fuse which should be a BS1362 5 Amp,
A.S.T.A. or BSI approved type.
3 Refit the fuse cover.
If the fitted plug is not suitable for your jack
outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should
have a value of 5 Amp. If a plug without a fuse
is used, the fuse at the distribution board should
not be greater than 5 Amp.
VAROITUS
Muiden kuin tässä esitettyjen toimintojen säädön tai
asetusten muutto saattaa altistaa vaaralliselle säteilylle
tai muille vaarallisille toiminnoille.
DK
Advarsel: Usynlig laserstråling ved åbning når
sikkerhedsafbrydere er ude af funktion. Undgå
utsættelse for stråling.
Bemærk: Netafbryderen STANDBY/ON er
sekundært indkoblet og ofbryder ikke strømmen fra
nettet. Den indbyggede netdel er derfor tilsluttet til
lysnettet så længe netstikket sidder i stikkontakten.
N
Observer: Nettbryteren STANDBY/ON er sekundert
innkoplet. Den innebygdenetdelen er derfor ikke
frakoplet nettet så lenge apparatet er tilsluttet
nettkontakten.
Note: The severed plug must be disposed to avoid
a possible shock hazard should it be inserted into
a 13 Amp jack elsewhere.
S
Klass 1 laseraparat
Varning! Om apparaten används på annat sätt än i
denna bruksanvisning specificerats, kan användaren
utsättas för osynlig laserstrålning, som överskrider
gränsen för laserklass 1.
How to connect a plug
The wires in the mains lead are coloured with
the following code: blue = neutral (N),
brown = live (L).
Observera! Strömbrytaren STANDBY/ON är
sekundärt kopplad och inte bryter inte strömmen från
nätet. Den inbyggda nätdelen är därför ansluten till
elnätet så länge stickproppen sitter i vägguttaget.
● As these colours may not correspond with the
colour markings identifying the terminals in your
plug, proceed as follows:
– Connect the blue wire to the terminal
marked N or coloured black.
– Connect the brown wire to the terminal
marked L or coloured red.
– Do not connect either wire to the earth
terminal in the plug, marked E (or e) or
coloured green (or green and yellow).
Before replacing the plug cover, make certain
that the cord grip is clamped over the sheath of
the lead - not simply over the two wires.
Copyright in the U.K.
Recording and playback of material may require
consent. See Copyright Act 1956 and The
Performer’s Protection Acts 1958 to 1972.
SF
Luokan 1 laserlaite
Varoitus! Laitteen käyttäminen muulla kuin tässä
käyttöohjeessa mainitulla tavalla saattaa altistaa
käyttäjän turvallisuusluokan 1 ylittävälle
näkymättömälle lasersäteilylle.
Oikeus muutoksiin varataan. Laite ei saa olla alttiina
tippu-ja roiskevedelle.
Toiminnanvalitsin STANDBY/ON on kytketty
toisiopuolelle, eikä se kytke laitetta irti sähköverkosta.
Sisäänrakennettu verkko-osa on kytkettynä
sähköverkkoon aina silloin, kun pistoke on
pistorasiassa.
VARO!
AVATTAESSA JA SUOJALUKITUS
OHITETTAESSA OLET ALTTIINA
NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.
ÄLÄ KATSO SÄ TEESEEN.
VARNING!
OSYNLIG LASERSTRÅLNING NÄR DENNA
DEL ÄR ÖPPNAD OCH SPÄRREN ÄR
URKOPPLAD. BETRAKTA EJ STRÅLEN.
i
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
PRODUIT LASER DE CLASSE 1
UCT
UKT
R PROD
E
1 PROD
LASE
SE RLAIT
S1
RATSE 1
CLASR KLAS
1 LASE
CLAS
R APPA
LASE AN
LASE R DE
LUOKS 1 LASE
KLAS UIT
PROD
CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN
OPEN. AVOID EXPOSURE TO BEAM
ADVARSEL SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING
UNDGÅ UDSÆTTELSE FOR STRÅLING
ADVARSEL SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL
ÅPNES UNNGÅ EKSPONERING FOR STRÅLEN
VARNING SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR
DENNA DEL ÄR ÖPPNAD BETRAKTA EJ STRÅLEN
VARO ! AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA
NÄKYMÄTTÖMÄLLE LASER SÄTEILYLLE, ÄLÄ KATSO SÄTEESEEN
VORSICHT SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG
WENN ABDECKUNG GEÖFFNET NICHT DEM STRAHL AUSSETSEN
DANGER VISIBLE AND INVISIBLE LASER RADIATION WHEN
OPEN AVOID DIRECT EXPOSURE TO BEAM
ATTENTION RAYONNEMENT LASER VISIBLE ET INVISIBLE EN
CAS D’OUVERTURE EXPOSITION DANGEREUSE AU FAISCEAU
ПРЕДУПРЕЖДЕНИЕ ПРИ ОТКРЫТИИ УСТРОЙСТВА
ВЫ МОЖЕТЕ ПОДВЕРГНУТЬСЯ ВОЗДЕЙСТВИЮ
ВИДИМОГО И НЕВИДИМОГО ЛАЗЕРНОГО ИЗЛУЧЕНИЯ.
ИЗБЕГАЙТЕ ВОЗДЕЙСТВИЯ ЛУЧА.
LASER SAFETY
This unit employs a laser. Due to possible eye
injury, only a qualified service person should
remove the cover or attempt to service this device.
SECURITE LASER
L’appareil utilise un laser. En raison des risques de
blessure des yeux, le retrait du couvercle ou les
réparations de l’appareil devront être confiés
exclusivement à un technicien d’entretien qualifié.
VORSICHT MIT DEM LASER
Dieses Gerät enthält einen Laser. Um unnötige
Augenverletzungen zu vermeiden, sollten Sie alle
Wartungs- und Reparaturarbeiten einem
qualifizierten Wartungstechniker überlassen.
БЕЗОПАСНОЕ ИСПОЛЬЗОВАНИЕ ЛАЗЕРА
Данное устройство содержит лазер. Из-за
опасности травмирования глаз снимать
крышку или обслуживать данное устройство
должен только сертифицированный
специалист по техническому обслуживанию.
DANGER
This unit emits visible laser radiation when open.
Avoid direct eye exposure to beam.
When this unit is plugged into a wall outlet, do not
place your eyes close to the opening of the disc
tray and other openings or look inside.
DANGER
Risque d'exposition au laser en cas d'ouverture.
Eviter toute exposition au faisceau.
Lorsque cet appareil est branché à la prise de
courant, ne pas approcher les yeux de l'ouverture
du plateau changeur et des autres ouvertures
pour regarder à l'intérieur.
GEFAHR
Sichtbare Laserstrahlen bei geöffneter Abdeckung.
Achten Sie darauf, nicht direkt in den Laserstrahl zu
blicken.
Wenn das Gerät an die Wandsteckdose angeschlossen
ist, halten Sie die Augen von der Öffnung des DiscFachs oder anderen Öffnungen fern, und blicken Sie in
diesem Fall nicht in das Innere des Geräts.
ОПАСНОСТЬ
Данное устройство излучает в открытом
состоянии видимые лазерные лучи. Не
допускайте непосредственного воздействия
лазерных лучей на глаза.
Когда данное устройство подключено к
настенной розетке, не приближайте глаза к
отверстию лотка для диска и других
отверстий и не смотрите на внутренние части.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
ATTENTION
L’emploi de commandes, de réglages ou un choix
de procédures différents des spécifications de
cette brochure peut entraîner une exposition à
d’éventuelles radiations pouvant être dangereses.
ACHTUNG
Die Verwendung von Bedienungselementen oder
Einstellungen oder die Durchführung von
Bedienungsvorgängen, die nicht in dieser
Anleitung aufgeführt sind, kann zu einem Kontakt
mit gefährlichen Laserstrahlen führen.
ПРЕДУПРЕЖДЕНИЕ
Использование органов управления или
настроек или выполнение процедур,
отличных от описанных в данном
руководстве, могут привести к опасному
облучению.
ii
CAUTION: READ THIS BEFORE OPERATING THIS UNIT.
1
To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
2 Install this unit in a well ventilated, cool, dry, clean
place — away from direct sunlight, heat sources,
vibration, dust, moisture, or cold. In a cabinet,
allow about 2.5cm (1 inch) of free space all
around this unit for adequate ventilation.
3 Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature
changes from cold to hot, nor locate this unit in
an environment with high humidity (i.e., a room
with a humidifier) to prevent condensation inside
this unit, which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
5 Avoid installing this unit where foreign objects
may fall onto this unit and/or this unit may be
exposed to liquid dripping or splashing. On the
top of this unit, do not place:
– Other components, as they may cause damage
and/or discoloration on the surface of this unit.
– Burning objects (i.e., candles), as they may cause
fire, damage to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall,
spilling the liquid and causing an electrical
shock to the user and/or damage to this unit.
6 Do not cover this unit with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation.
If the temperature inside this unit rises, it may cause
fire, damage to this unit, and/or personal injury.
7 Do not plug in this unit to a wall outlet until all
connections are complete.
8 Do not operate this unit upside-down. It may
overheat, possibly causing damage.
9 Do not use excessive force on switches, knobs
and/or cords.
10 When disconnecting the power cord from the
wall outlet, grasp the plug; do not pull the cord.
11 Do not clean this unit with chemical solvents; this
might damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used.
Using this unit with a higher voltage than specified
is dangerous and may cause fire, damage to this
unit, and/or personal injury. YAMAHA will not be
held responsible for any damage resulting from use
of this unit with a voltage other than as specified.
iii
13 Do not attempt to modify or fix this unit. Contact
qualified YAMAHA service personnel when any
service is needed. The cabinet should never be
opened for any reason.
14 When not planning to use this unit for long
periods of time (i.e., vacation), disconnect the AC
power plug from the wall outlet.
15 Be sure to read the “Troubleshooting” section on
common operating errors before concluding that
this unit is faulty.
16 Before moving this unit, press STANDBY/ON to
set the unit in standby mode, and then disconnect
the AC power plug from the wall outlet.
17 Install this unit near the wall outlet and where the
AC power plug can be reached easily.
The unit is not disconnected from the AC power
source as long as it is connected to the wall outlet,
even if this unit itself is turned off. This state is called
the standby mode. In this state, this unit is designed
to consume a very small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
Be sure to place this unit on a level surface.
If you do not do so, PLAYXCHANGE operation of
this unit will not function correctly, and may damage
the disc(s) and/or this unit itself.
LASER
Type
Wave length
Output Power
Beam divergence
Semiconductor laser GaAlAs
650 nm (DVD)
780 nm (VCD/CD)
7 mW (DVD)
10 mW (VCD/CD)
60 degree
Refer to pages i and ii at the beginning of the
manual for more information.
Contents
Region codes ........................................................................... 2
Supplied accessories............................................................... 2
Notes on discs ........................................................................ 2
Cleaning discs .......................................................................... 2
Patent information.................................................................. 2
Functional Overview
Front panel............................................................................... 3
Rear panel ................................................................................ 4
Remote control....................................................................... 5
Connections
General notes on connections ............................................ 6
Audio connections ................................................................. 6
Digital connection................................................................................6
Analog connection ..............................................................................6
Video connections.................................................................. 7
SCART terminal <A>.......................................................................7
Component video jacks <B> .......................................................7
Composite video jack <C>...........................................................7
Getting Started
Inserting batteries into the remote control..................... 8
Using the remote control ...............................................................8
Turning on the power ........................................................... 9
About the auto standby function ...............................................9
Setting a TV type and display............................................... 9
Setting a color system for your TV ...........................................9
Setting an aspect ratio for your TV........................................ 10
Setting a language preference ............................................11
Setting the OSD language ........................................................... 11
Setting the audio, subtitle and disc menu languages..... 11
Disc Operations
Basic playback ........................................................................12
General operation ................................................................12
Pausing playback ................................................................................ 12
Selecting a track/chapter............................................................... 13
Searching backward/forward...................................................... 13
Stopping playback............................................................................. 13
Selecting the various repeat/shuffle functions................13
Repeat ..................................................................................................... 13
Repeating a section within a chapter/track ........................ 14
Shuffle (except DVD/VCD/SVCD)........................................ 14
Operations for video playback (DVD/VCD/SVCD).....14
Using the disc menu........................................................................ 14
Slow motion ........................................................................................ 14
Zooming in........................................................................................... 15
Resuming playback from the last stopped point............. 15
On-screen display (OSD) ............................................................ 15
Special DVD features .......................................................... 16
Playing by title..................................................................................... 16
Camera angle ...................................................................................... 16
Audio ....................................................................................................... 17
Subtitles .................................................................................................. 17
Special VCD & SVCD features ......................................... 17
Playback control (PBC) ................................................................. 17
Audio CDs............................................................................. 17
Playing by discs................................................................................... 17
Playing MP3/JPEG/Kodak picture CDs ............................ 17
General operation............................................................................ 17
Selecting a folder and track/file................................................. 18
Special picture disc features .............................................. 18
Preview function (JPEG) ............................................................... 18
Zooming pictures ............................................................................. 18
Playback with multi-angles ........................................................... 18
Scan effect............................................................................................. 19
Playing MP3 music and JPEG pictures simultaneously...19
Setup Menu
General setup menu ............................................................ 20
Locking/Unlocking the disc for viewing................................ 20
Dimming the front panel display.............................................. 20
Programming disc tracks and discs ......................................... 20
OSD language..................................................................................... 22
Screen saver......................................................................................... 22
Sleep timer ........................................................................................... 22
Audio setup menu................................................................ 22
Setting the analog output............................................................. 23
Setting the digital output .............................................................. 23
CD upsampling .................................................................................. 24
Night mode.......................................................................................... 24
Video setup menu ................................................................ 24
TV type................................................................................................... 24
Setting the TV display .................................................................... 25
Progressive............................................................................................ 26
Picture settings ................................................................................... 26
Switching the YUV/RGB............................................................... 27
Preference setup menu....................................................... 27
Audio, subtitle and disc menu................................................... 28
Restricting playback with parental control ......................... 28
PBC (Playback control) ................................................................. 28
MP3/JPEG menu................................................................................ 28
Changing the password................................................................. 29
Resetting the system....................................................................... 29
Language Code .......................... 30
Troubleshooting ........................ 32
Glossary ...................................... 34
Specifications ............................. 35
1 En
English
Introduction
Introduction
Thank you for purchasing this unit. This
Owner’s Manual explains the basic
operation of this unit.
Region codes
DVD discs must be labeled ALL
regions or Region 2 in order to
play on this unit.
You cannot play discs labeled for
other regions.
ALL
2
Supplied accessories
– Remote control
– Two batteries (AA, R06, UM-3) for the
remote control
– Audio pin cable
– Video pin cable
– Owner’s Manual
– Do not use any non-standard shaped
discs (heart-shaped, etc.).
– Do not use discs with tape, seals, or
paste on their surface. Doing so may
damage this unit.
– Do not use discs affixed with labels
printed by a commercially available label
printer.
Cleaning discs
• When a disc becomes dirty, clean it
with a cleaning cloth. Wipe the disc
from the center out. Do not wipe in a
circular motion.
• Do not use solvents such as benzine,
thinner, commercially available cleaners,
or antistatic spray intended for analog
records.
Patent information
Notes on discs
– This unit is designed for use with the
following discs: DVD-Video, Video CD,
Super Video CD, Audio CD, CD-R,
CD-RW, DVD+RW, DVD+R, DVD-R
and DVD-RW.
– This unit can play:
– MP3 and picture (Kodak, JPEG) files
recorded on CD-R(W).
– JPEG/ISO 9660 format
– Maximum 30 characters per display
– CD-R and CD-RW cannot be played
unless finalized.
– Some discs cannot be played depending
on the recording conditions, such as the
PC environment and application
software. The characteristics and
conditions of some discs (materials,
scratches, curvature, etc.) may result in
playback failure.
– Be sure to use only CD-R and CD-RW
discs made by reliable manufacturers.
2 En
Manufactured under license from
Dolby Laboratories. “Dolby”,
“Pro Logic” and the double-D
symbol are trademarks of Dolby
Laboratories.
“DTS” and “DTS Digital Out” are
trademarks of Digital Theater
Systems, Inc.
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
Functional Overview
2
1
0
9
1 Disc tray
Loads up to 5 discs in the disc tray.
2 / (OPEN/CLOSE)
Opens or closes the disc tray.
3 PLAYXCHANGE
Reloads or unloads discs without
interrupting current disc playback.
4 9 (STOP)
Stops playback.
5 B/; (PLAY/PAUSE)
Starts or pauses playback.
6 R/T
Searches forward.*
Moves to the next chapter or track.
English
Front panel
7 6 5 4 3
8
7 S/Q
Searches backward.*
Moves to the previous chapter or track.
8 Front panel display
Shows the current status of this unit.
9 DISC (1, 2, 3, 4, 5) / LEDs
Selects and directly plays back the preferred
disc.
Each LED lights up in orange when this unit
recognizes that the corresponding disc has
been loaded.
0 STANDBY/ON
Turns on this unit or sets it to the standby
mode.
While this unit is in the standby mode, it
consumes a small amount of power.
* Press the button for about two seconds.
3 En
Functional Overview
Rear panel
VIDEO
Y
AUDIO
OUT
1
COAXIAL
COMPONENT
DIGITAL
OUT
PR /CR
2
PB /CB
VIDEO OUT
3
4
5
1 AUDIO OUT (L, R) jacks
Connect to the audio input jacks of your
AV receiver or stereo system.
2 DIGITAL OUT - COAXIAL jack
Connect to the coaxial input jack of your
AV receiver.
3 VIDEO OUT - COMPONENT
(Y, PB/CB, PR/CR) jacks
Connect to the component input jacks of
your AV receiver.
6
4 AV terminal
Connect to SCART input terminal of your
TV.
5 VIDEO OUT - VIDEO jack
Connect to the composite video input jack
of your AV receiver.
6 AC power cord
Connect to a standard AC outlet.
Caution: Do not touch the inner pins of the jacks on the rear panel of this unit.
Electrostatic discharge may cause permanent damage to this unit.
4 En
Functional Overview
English
6 STOP (9)
Remote control
Stops playback.
7 SUBTITLE
Selects the subtitle language.
1
8 ANGLE
1
2
3
4
5
6
7
8
2
TOP MENU RETURN
3
MENU
9
ON SCREEN
w
SETUP
e
0
ENTER
4
Selects the DVD camera angle.
q
r
9 REPEAT
Repeats the chapter, track, title, disc or
all discs.
0 A-B
Repeats a specific segment.
OK
t
5
6
7
8
9
STOP
PLAY
PAUSE
SUBTITLE ANGLE ZOOM AUDIO
REPEAT
A B
SHUFFLE DISC SKIP
DVD
0
y
q Numeric buttons (0-9)
Selects numbered items in the currently
displayed menu.
u
i
o
w ON SCREEN
p
e SETUP
Accesses or exits from the on-screen
display (OSD) menu of this unit.
Accesses or exits from the setup menu
of this unit.
r T
Searches forward.*
Moves to the next chapter or track.
t PLAY (B)
1
Turns on this unit or sets it to the
standby mode.
2 TOP MENU/RETURN
Displays the top-level disc menu (DVD).
Moves back to the previous menu (DVD*/
VCD).
3 MENU
Accesses the menu of a disc (DVD).
Switches PBC on or off (VCD).
4 1 / 2/3 / 4
Selects an item in the currently displayed
menu. Search or slow playback.
ENTER/OK
Confirms the menu selection.
5 S
Searches backward.*
Moves to the previous chapter or track.
Starts playback.
y PAUSE (;)
Pauses playback temporarily.
Frame-by-frame playback.
u AUDIO
Selects the audio language or format.
i ZOOM
Enlarges the video image.
o DISC SKIP
Selects another disc.
p SHUFFLE
Plays tracks in a random order.
* Press and hold the button for about two
seconds.
5 En
Connections
General notes on connections
Be sure to turn off this unit and unplug the
power supply cable before you make or
change connections.
• Depending on the component you wish
to connect, there are various ways to
make connections. Possible connections
are described below.
• Refer to the manuals of your other
components as necessary to make the
best connections.
• Do not connect this unit via your VCR.
The video quality could be distorted by
the copy protection system.
• Do not connect the audio out jack of
this unit to the phono in jack of your
audio system.
Audio connections
You need to set “DIGITAL
OUTPUT” to “ALL” (see “DIGITAL
OUTPUT” on page 23).
Notes:
– If the audio format of the digital output
does not match the capabilities of your
receiver, the receiver produces a distorted
sound or no sound at all. Make sure to
select the appropriate audio format from
the menu screen on the disc.
Pressing AUDIO on the remote control once
or more may change not only the audio
language but also the audio format. The
selected format appears in the front panel
display for several seconds.
– If you wish to enjoy Dolby Digital, DTS, and
MPEG formats, you must connect this unit
to an AV receiver that supports these
formats.
Analog connection
Digital connection
This unit has a coaxial digital out jack.
Connect DIGITAL OUT - COAXIAL jack
of this unit to your AV receiver equipped
with a Dolby Digital, DTS, or MPEG
decoder using a commercially available
coaxial cable.
This unit has analog output jacks.
Connect AUDIO OUT (L, R) jacks of this
unit to the corresponding input jacks of
your audio component (such as a stereo
amplifier) using the supplied audio cable.
VIDEO
Y
COAXIAL
AUDIO
OUT
VIDEO
DIGITAL
OUT
COMPONENT
PR/CR
PB/CB
VIDEO OUT
Y
COAXIAL
This unit
COMPONENT
L
R
AUDIO
OUT
PR/CR
DIGITAL
OUT
Audio pin cable
(supplied)
PB/CB
VIDEO OUT
L
R
This unit
C
CD/DVD
R
COAXIAL
IN
L
Stereo
amplifier
AV receiver
Speakers
Left
speaker
6 En
Right
speaker
Connections
If your AV receiver has video output jacks,
connect your receiver and then your TV
so that you can use one TV for several
different video sources (LD, VCR, etc.) by
simply switching the input source selector
of your AV receiver.
This unit has three types of video output
jacks. Use the one that corresponds to the
input jacks of the component to be
connected.
If your TV has only a terminal for video
input, you can connect the TV directly to
this unit.
Connect AV terminal of this unit to
SCART input terminal of your TV using a
commercially available SCART cable.
Note:
– Ensure that the “TV” indication on SCART
cable is connected to the TV set and “DVD”
indication on SCART cable is connected to
this unit.
This unit
Component video jacks <B>
VIDEO
Y
AUDIO
OUT
COAXIAL
COMPONENT
DIGITAL
OUT
PR/CR
PR
<A>
PB/CB
VIDEO OUT
PB
Y
<B>
<C>
PB
PR
PR/CR
Video pin
cable
(supplied)
V
Y
PB/CB
Y
VIDEO
COMPONENT
VIDEO
AV receiver
S VIDEO
OUT
COMPONENT
VIDEO OUT
VIDEO
OUT
S VIDEO
IN
COMPONENT
VIDEO IN
VIDEO
IN
TV
Component video connections achieve
higher fidelity color reproduction than
S-video connections by transmitting video
signals on separate wires for luminance
(Y: green) and chrominance (PB: blue,
PR: red).
Connect VIDEO OUT - COMPONENT
(Y, PB/CB, PR/CR) jacks of this unit to
component input jacks of your AV receiver
and then to those of your TV using a
commercially available component cable.
Observe the color of each jack when you
make connections. If your AV receiver
does not have component output jacks,
you can achieve a better video image by
connecting the component output jacks of
this unit directly to the component input
jacks of your TV.
Composite video jack <C>
Connect VIDEO OUT - VIDEO jack of this
unit to the video input jack of your AV
receiver and then to that of your TV using
the supplied video cable.
7 En
English
SCART terminal <A>
Video connections
Getting Started
Step 1: Inserting batteries
into the remote control
Using the remote control
3
Remote control
sensor
1
2
1 Open the battery compartment.
2 Insert the two supplied batteries (AA, R06,
UM-3) following the indications (+/–)
inside the compartment.
3 Close the cover.
Notes:
– Insert batteries correctly according to the
polarity markings (+/–). The batteries
inserted in the opposite direction may leak.
– Replace the exhausted batteries
immediately with new ones to prevent a
leakage.
– Remove the batteries from the
compartment if the remote control is not
used for more than a month.
– If the batteries have leaked, dispose of
them immediately. Avoid touching the
leaked material or letting it come into
contact with clothing, etc. Clean the battery
compartment thoroughly before installing
new batteries.
– Do not use old batteries together with new
ones.
– Do not use different types of batteries (such
as alkaline and manganese batteries)
together. Read the packaging carefully as
these different types of batteries may have
the same shape and color.
– Dispose of the batteries correctly in
accordance with your local regulations.
8 En
Point the remote control at
the remote control sensor,
within approximately 6 m
(20 ft) from the unit.
30°
30°
Handling the remote control
• Do not spill water or other liquids on
the remote control.
• Do not drop the remote control.
• Do not leave or store the remote
control in the following types of
conditions:
– places of high humidity, such as near a
bath
– places of high temperature, such as near
a heater or stove
– places of extremely low temperatures
– dusty places
Getting Started
1 Connect the AC power cord to an AC
outlet.
2 Turn on your TV and AV receiver.
3 Select the appropriate input source of the
AV receiver connected to this unit. Refer
to the manual supplied with your AV
receiver for details.
4 Turn on this unit.
5 Set the TV to the correct Video IN channel
(e.g. EXT1, EXT2, AV1, AV2, AUDIO/
VIDEO, etc. Refer to the manual supplied
with your TV for details).
➜ The front panel display lights up and the
default screen appears on the TV.
When “SCREEN SAVER” is set to
“OFF” (see page 22):
The background or the paused picture is
displayed for 30 minutes.
This unit is set to the standby mode.
Step 3: Setting a TV type and
display
Setting a color system for your
TV
This unit is compatible with both NTSC
and PAL video formats. Select the color
system that matches your TV.
About the auto standby function
This unit is automatically set to the standby
mode when disc playback is stopped or
paused for more than 30 minutes.
When “SCREEN SAVER” is set to
“ON” (see page 22):
The background is displayed when disc
playback is stopped or the paused picture
is displayed for 15 minutes.
OR
Background
Example of a
paused picture
The screen saver is displayed for another 15
minutes.
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
COMPONENT
PAL
MULTI
NTSC
1 Press SETUP.
2 Press 2 repeatedly to select “VIDEO
SETUP PAGE”.
3 Press 3 / 4 to highlight [TV TYPE], and
then press 2.
4 Press 3 / 4 to highlight one of the following
options.
This unit is set to the standby mode.
TIPS:
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
9 En
English
Step 2: Turning on the power
Getting Started
PAL
Select this if the connected TV is a PAL
system TV. It will change the video signals
of NTSC discs and output them in PAL
format.
MULTI
Select this if the connected TV is
compatible with both NTSC and PAL
formats (such as a multi-system TV). The
output format will be in accordance with
the video signals of the disc.
NTSC
Select this if the connected TV is an NTSC
system TV. It will change the video signals
of PAL discs and output them in NTSC
format.
5 Select an item, and then press
ENTER/OK to confirm your selection.
Notes:
– Before changing the current TV
standard setting, ensure that your TV
supports the selected TV type.
– If the picture is not displayed
properly on your TV, wait for 15
seconds for this unit to activate
automatic recovery.
CHANGING PAL TO NTSC:
1. ENSURE THAT YOUR TV SUPPORTS
NTSC STANDARD.
2. IF THERE IS A DISTORTED PICTURE
DISPLAYED ON THE TV, WAIT 15
SECONDS FOR AUTO RECOVER.
OK
TIPS:
10 En
CANCEL
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
Setting an aspect ratio for your
TV
You can set the aspect ratio of this unit to
match your TV. If the aspect ratio of your
TV is 4:3, you do not need to change this
setting. If you have a widescreen TV,
change this setting according to the
following procedure.
For details, see “Setting the TV display” on
page 25.
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
COMPONENT
4:3 PAN SCAN
4:3 LETTER BOX
16:9
1 Press SETUP.
2 Press 2 repeatedly to select “VIDEO
SETUP PAGE”.
3 Press 3 / 4 to highlight [TV DISPLAY], and
then press 2.
4 Press 3 / 4 to highlight [16:9], and then
press ENTER/OK to confirm the
selection.
Getting Started
You can select your own preferred
language settings. This unit automatically
switches to your preferred language
whenever you load a disc. If the selected
language is not available on the disc, the
default language of the disc will be used
instead. The OSD language in the system
menu remains once selected.
Setting the audio, subtitle and
disc menu languages
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
PASSWORD
DEFAULT
ENGLISH
CHINESE
FRENCH
SPANISH
PORTUGUESE
POLISH
ITALIAN
TURKISH
Setting the OSD language
GENERAL SETUP PAGE
DISC LOCK
DISPLAY DIM
PROGRAM
OSD LANGUAGE
SCREEN SAVER
SLEEP
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
POLSKI
РУССКИЙ
TÜRKÇE
1 Press SETUP.
2 Press 1 / 2 to select “GENERAL SETUP
PAGE”.
3 Press 3 / 4 to highlight [OSD
LANGUAGE], and then press 2.
4 Press 3 / 4 to select a language, and then
press ENTER/OK to confirm your
selection.
TIPS:
1 Press STOP (9) twice, and then press
SETUP.
2 Press 2 repeatedly to select
“PREFERENCE PAGE”.
3 Press 3 / 4 to highlight one of the options
below at a time, and then press 2.
– AUDIO (audio language)
– SUBTITLE (subtitle language)
– DISC MENU (disc menu language)
4 Press 3 / 4 to select a language, and then
press ENTER/OK to confirm your
selection.
If the language you want is not in the
list, select [OTHERS],
and then use the numeric buttons (0-9)
on the remote control to enter the 4-digit
language code (see “Language Code” on
page 30), and then press ENTER/OK to
confirm the code.
5 Repeat steps 3–4 for other language
settings.
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
11 En
English
Step 4: Setting a language
preference
Disc Operations
IMPORTANT!
– If the inhibition icon ( or X)
appears on the TV screen when a
button is pressed, the function for
that button is not available on the
current disc or at the current time.
– Depending on the DVD or VIDEO
CD disc, some operations may
operate differently or be
restricted.
– Do not push on the disc tray or put
any objects other than discs on the
disc tray. Doing so may cause the
disc player to malfunction.
Basic playback
1 Press STANDBY/ON on the front panel
or
on the remote control.
2 Press / (OPEN/CLOSE) on the front
panel to open the disc tray.
3 Place discs in the disc tray with the printed
side up.
5 To stop playback, press 9 (STOP) on the
front panel or STOP (9) on the remote
control.
• To play back a specific disc directly,
press DISC SKIP repeatedly on the
remote control or press DISC (1, 2, 3,
4, 5) on the front panel.
• Press PLAYXCHANGE on the front
panel to open the disc tray, and then
reload or unload discs without
interrupting current disc playback.
• Playback stops after all discs have been
played.
• When the disc tray is open, press
B/; (PLAY/PAUSE),
/ (OPEN/CLOSE),
PLAYXCHANGE or
DISC (1, 2, 3, 4, 5) to close the disc
tray automatically.
General operation
Unless stated otherwise, all operations
described here are carried out using the
supplied remote control.
Pausing playback
1 During playback, press PAUSE (;).
➜ Playback is paused and the sound is
muted.
4 Press B/; (PLAY/PAUSE) on the front
panel or PLAY (B) on the remote
control.
➜ The disc tray closes and playback starts
automatically for all of the loaded discs
in the tray in sequence.
TIPS:
12 En
2 Press PAUSE (;) again to select the next
picture frame.
3 To resume normal playback, press
PLAY (B).
The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
Disc Operations
• Press S / T or use the numeric
buttons (0-9) to select a track/chapter
number.
• During repeated playback of a track/
chapter, press S / T to replay the
same track/chapter.
Searching backward/forward
1 Press and hold S / T or press 1 / 2.
2 While searching, press S / T or
1 / 2 repeatedly to select the desired
speed.
3 To resume normal playback, press
PLAY (B).
Notes:
– 1 / 2 key may not be available with some
discs.
– For MP3 and WMA, the search function
allows you to search the track currently
being played.
Stopping playback
• Press STOP (9).
Selecting the various repeat/
shuffle functions
English
Selecting a track/chapter
Repeat
Repeating chapter/title/disc (DVD)
Each time you press REPEAT, the display
changes as follows:
CHAPTER
REPEAT OFF
TITLE
ALL DISC
DISC
CHAPTER*: repeats the current
chapter
TITLE: repeats the current title
DISC*: repeats the entire disc
ALL DISC*: repeats all discs loaded
in the tray
REPEAT OFF: exits from the repeat mode
* This feature may not be available with some
discs.
Repeating track/disc (except DVD)
Each time you press REPEAT, the display
changes as follows;
TRACK
REPEAT OFF
DISC
ALL DISC
TRACK: repeats the current track
DISC: repeats the entire disc
ALL DISC: repeats all discs loaded in
the tray
REPEAT OFF: exits from the repeat mode
Notes:
– When only one disc is available in the disc
tray, it is continuously played when
ALL DISC is selected.
– For VCD, repeat playback is not available
when the PBC mode is selected.
TIPS:
The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
13 En
Disc Operations
Repeating a section within a
chapter/track
1 While playing a disc, press A-B at the
desired starting point.
2 Press A-B again at the desired end point.
• A and B can only be set within the same
chapter/track.
➜ The selected section repeats
continuously.
3 To exit from the sequence, press A-B.
Shuffle (except DVD/VCD/SVCD)
With the shuffle function, you can play
tracks in a random order.
1 During playback, press SHUFFLE
repeatedly to select between SHUFFLE
DISC, SHUFFLE ALL DISC, and SHUFFLE
OFF.
➜ The selected mode appears in the front
panel display for several seconds.
• In the SHUFFLE DISC mode, all tracks
on the disc currently playing are played
in a random order.
• In the SHUFFLE ALL DISC mode, tracks
from all discs are played in a random
order:
– If the disc currently playing is a CD, only
tracks from CDs will be played.
– If the disc currently playing is formatted
in MP3 or WMA, tracks on the disc
currently playing are played in a random
order. When all the tracks on that disc
have been played, shuffle playback
continues with the next disc.
TIPS:
14 En
Operations for video playback
(DVD/VCD/SVCD)
Using the disc menu
Depending on the disc, a menu may appear
on the TV screen once you load the disc.
To select a playback feature or item
• Use 1 / 2/3 / 4 or the numeric
buttons (0-9) on the remote control,
and then press ENTER/OK to start
playback.
To access or exit from the menu
• Press MENU on the remote control.
Slow motion
You can play back in slow motion.
1 Press 3 for reverse slow motion or 4 for
forward slow motion.
2 During slow motion, press 3 / 4
repeatedly to select the desired speed.
3 To resume normal playback, press
PLAY (B).
Note:
– Reverse slow motion is not available for
VCDs and SVCDs.
The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
Disc Operations
This function allows you to enlarge or
lessen the picture on the TV screen and
pan through the enlarged picture.
1 During playback, press ZOOM repeatedly
to display the picture at different scales.
• Use 1 / 2/3 / 4 to pan through the
enlarged picture.
➜ Playback continues.
2 Press ZOOM repeatedly to return to the
original size.
On-screen display (OSD)
The OSD menu shows disc playback
information (e.g., the title or chapter
number, elapsed playing time or audio/
subtitle language). A number of operations
are possible without interrupting disc
playback.
1 During playback, press ON SCREEN.
➜ A list of available disc information
appears on the TV screen.
DVD
MENU
Resuming playback from the last
stopped point
You can resume playback of the last 10
discs, even if the discs were ejected or the
power of this unit was turned off.
1 Load one of the last 10 discs.
➜ “LOADING #” (#: the disc tray number
(1-5)) appears on the TV screen.
2 Press PLAY (B) while “LOADING #” is
displayed on the TV screen.
➜ “RESUME PLAY” appears on the TV
screen and the disc is played back from
the last point.
To cancel the resume mode
• When playback is stopped, press
STOP (9) again.
TIPS:
TITLE
CHAPTER
AUDIO
SUBTITLE
02/14
02/14
5.1CH
ENG
BITRATE 16
TITLE ELAPSED 0:02:25
VCD/SVCD
MENU
TRACK
DISC TIME
TRACK TIME
REPEAT
02/14
0:49:17
0:03:43
OFF
BITRATE 16
TOTAL ELAPSED 0:02:25
2 Press 3 / 4 to view the information, and
then press ENTER/OK to access the
selected item.
3 Use the numeric buttons (0-9) to input
the number/time or press 3 / 4 to make a
selection, and then press ENTER/OK to
confirm the selection.
➜ Playback changes to the selected time
or to the selected title/chapter/track.
The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
15 En
English
Zooming in
Disc Operations
Title/Chapter/Track selection
(DVD/VCD)
1 Press 3 / 4 to select [TITLE] or
[CHAPTER] (DVD) or [TRACK] (VCD).
2 Press ENTER/OK to confirm the
selection.
3 Select a title, chapter or track number
using the numeric buttons (0-9).
Time search (DVD/VCD)
1 Press 3 / 4 to select [TT TIME] or [CH
TIME] (DVD) or [TRACK TIME] or [DISC
TIME] (VCD).
• [TT TIME] refers to the total time of the
current title, and [CH TIME] refers to
the total time of the current chapter.
2 Press ENTER/OK to confirm the
selection.
3 Enter hours, minutes and seconds from left
to right using the numeric buttons (0-9)
(e.g. 0:34:27).
Audio/Subtitle/Angle (DVD)
You can change [AUDIO], [SUBTITLE] or
[ANGLE] if these functions are available on
the disc you are playing.
1 Press 3 / 4 to select [AUDIO],
[SUBTITLE] or [ANGLE].
2 Press ENTER/OK to confirm the
selection.
3 For Audio and Subtitle:
Press 3 / 4 to highlight your selection, and
then press ENTER/OK.
OR
For Angle:
Select an angle using the numeric
buttons (0-9).
TIPS:
16 En
Repeat/Time display (DVD/VCD)
1 Press 3 / 4 to select [REPEAT] or [TIME
DISP.].
2 Press ENTER/OK to confirm the
selection.
3 Press 3 / 4 to highlight your selection, and
then press ENTER/OK.
Time display (CD)
Each time you press ON SCREEN, the
time display changes as follows:
TOTAL ELAPSED
TOTAL REMAIN
SINGLE REMAIN
SINGLE ELAPSED
Special DVD features
Playing by title
1 Press MENU.
➜ The disc title menu appears on the TV
screen.
2 Use 1 / 2/3 / 4 or the numeric buttons
(0-9) to select a playback option.
3 Press ENTER/OK to confirm your
selection.
Camera angle
• Press ANGLE repeatedly to select the
desired angle.
The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
Disc Operations
Changing the audio language and/or
format
• Press AUDIO repeatedly to select an
audio language.
Subtitles
• Press SUBTITLE repeatedly to select
a subtitle language.
Audio CDs
English
Audio
Playing by discs
1 Load a disc.
➜ Playback starts automatically.
➜ The TV screen displays the current
playback status and the number of
tracks to select the desired track.
2 Playback stops at the end of the disc.
3 To stop playback, press STOP (9).
Special VCD & SVCD features
Playback control (PBC)
For VCD with playback control
(PBC) feature (version 2.0 only)
1 Press MENU to toggle between “PBC
ON” and “PBC OFF”.
➜ If you select “PBC ON”, the disc menu
(if available) appears on the TV.
2 Use S / T or the numeric buttons
(0-9) to select a playback option.
3 During playback, press TOP MENU/
RETURN to return to the menu screen
(if PBC is selected).
If you want to skip the index menu
and play back a disc directly from the
beginning,
• Press MENU on the remote control to
turn off PBC.
TIPS:
Playing MP3/JPEG/Kodak
picture CDs
General operation
1 Load a disc.
• The disc reading time may exceed 30
seconds due to the complexity of the
directory/file configuration.
➜ The data disc menu appears on the TV
screen.
2 Playback starts automatically. If not, press
PLAY (B).
00:00 00:00
001/020
Favorite
MP3
Piano
MP3
Cello
MP3
Jazz
MP3
Live
The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
17 En
Disc Operations
During playback, you can:
• Press S / T to select another
track/file in the current folder.
• Press PAUSE (;) to pause playback.
Note:
– It may not be possible to play certain MP3/
JPEG discs due to the configuration and
characteristics of the discs or the recording
conditions.
Selecting a folder and track/file
1 Press 3 / 4 to select a folder, and then
press ENTER/OK to open the folder.
2 Press 3 / 4 to select a track/file.
3 Press ENTER/OK to confirm your
selection.
➜ Playback starts from the selected track/
file, and continues to all the tracks/files
on all available folders.
2 Press S / T to display the other
pictures on the previous/next page.
3 Use 1 / 2/3 / 4 to highlight one of the
pictures, and then press ENTER/OK to
start playback.
OR
Move the cursor to highlight
on the
bottom of the page to start playback from
the first picture on the current page.
4 Press MENU to return to the picture CD
menu.
Special picture disc features
1 Load a picture disc (Kodak Picture CD or
JPEG).
➜ For Kodak discs, the slideshow begins.
➜ For JPEG discs, the picture menu
appears on the TV screen.
2 Press PLAY (B) to start the slideshow.
Preview function (JPEG)
This function displays the content of the
current folder or the entire disc.
1 Press STOP (9) during playback.
➜ 12 thumbnail pictures appear on the TV
screen.
TIPS:
18 En
Zooming pictures
1 During playback, press ZOOM repeatedly
to display the picture at different scales.
2 Use 1 / 2/3 / 4 to view the zoomed picture.
Playback with multi-angles
• During playback, press 1 / 2/3 / 4 to
rotate the picture on the TV screen.
1: rotates the picture counter-clockwise
2: rotates the picture clockwise
3: flips the picture vertically
4: flips the picture horizontally
The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
Disc Operations
English
Scan effect
• Press ANGLE repeatedly to choose a
scan effect.
➜ Various scan effects appear in the top
left corner of the TV screen.
Playing MP3 music and JPEG
pictures simultaneously
1 Load a disc that contains both music and
picture data.
➜ The disc menu appears on the TV
screen.
2 Select an MP3 track.
3 During MP3 music playback, select a
picture from the TV screen, and then press
PLAY (B).
➜ The picture files are played back one
after another, and playback continues to
all the files on all available folders.
4 To quit simultaneous playback, press
MENU, and then press STOP (9).
Note:
– Some files on Kodak or JPEG discs may be
distorted during playback due to the
configuration and characteristics of the
discs.
TIPS:
The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
19 En
Setup Menu
Setup is carried out on the TV screen,
enabling you to customize this unit to suit
your own particular requirements.
General setup menu
1 Press SETUP.
2 Press 1 / 2 to select the “General Setup”
icon.
3 Press ENTER/OK to confirm your
selection.
GENERAL SETUP PAGE
DISC LOCK
DISPLAY DIM
PROGRAM
OSD LANGUAGE
SCREEN SAVER
SLEEP
Locking/Unlocking the disc for
viewing
Not all discs are rated or coded by the
manufacturer of the disc. You can prevent
playback of a specific disc by locking the
disc. You can lock up to 40 discs on this
unit.
1 In “GENERAL SETUP PAGE”, press 3 / 4
to highlight [DISC LOCK], and then
press 2.
LOCK
Select this to lock playback of the current
disc. Subsequent access to a locked disc
requires a six-digit password.
The default password is “000 000” (see
“Changing the password” on page 29).
TIPS:
20 En
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
UNLOCK
Select this to unlock the disc and allow
future playback.
2 Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
Dimming the front panel display
You can select different levels of
brightness for the front panel display.
1 In “GENERAL SETUP PAGE”, press 3 / 4
to highlight [DISPLAY DIM], and then
press 2.
100%
Select this for full brightness.
70%
Select this for medium brightness.
40%
Select this for dimming display.
2 Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
Programming disc tracks and
discs
Program: Track (except picture
CD/MP3/WMA)
You can play back the contents of a disc in
the desired order by programming the
tracks to be played. You can store up to 20
tracks per disc with a maximum of 10
discs.
1 In “GENERAL SETUP PAGE”, press 3 / 4
to highlight [PROGRAM], and then press 2
to select [FTS].
Setup Menu
PROGRAM: TRACK: (01-17)
1
2
3
4
5
6 __
04
10
__
__
__
7
8
9
10
EXIT
__
__
__
__
START
NEXT
To input your favorite tracks/
chapters
3 Use the numeric buttons (0-9) to enter
a valid track/chapter number.
4 Use 1 / 2/3 / 4 to move the cursor to the
next position.
• If you want to program more than ten
tracks/chapters, press T to move to
the next page, and then proceed with
programming.
OR
• Use 1 / 2/3 / 4 to highlight [NEXT] on
the program menu, and then press
ENTER/OK.
5 Repeat step 3 to input another track/
chapter number.
To remove a track
6 Use 1 / 2/3 / 4 to move the cursor to the
track you want to remove.
7 Press ENTER/OK or 0 on the numeric
buttons (0-9) to remove the track from
the program menu.
TIPS:
Program: Disc
You can play back discs in the desired
order by programming the discs to be
played. You can store up to 5 discs.
1 In “GENERAL SETUP PAGE”, press 3 / 4
to highlight [PROGRAM], and then press 2
to select [FDS].
2 Press ENTER/OK to confirm your
selection.
FAVOURITE DISC SELECTION
(1) DISC: _
(2) DISC: _
(3) DISC: _
(4) DISC: _
(5) DISC: _
START
EXIT
To input your favorite discs
3 Use the numeric buttons (0-9) to enter
a valid disc number.
4 Use 1 / 2/3 / 4 to move the cursor to the
next position.
5 Repeat steps 3–4 to input another disc
number.
To remove a disc
6 Use 1 / 2/3 / 4 to move the cursor to the
disc you want to remove.
7 Press 0 on the numeric buttons (0-9) to
remove the disc from the program menu.
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
21 En
English
2 Press ENTER/OK to confirm your
selection.
Setup Menu
To start program playback
• Use 1 / 2/3 / 4 to highlight [START] on
the program menu, and then press
ENTER/OK.
➜ Playback starts for the selected tracks
or discs in the programmed sequence.
To exit from program playback
• Use 1 / 2/3 / 4 to highlight [EXIT] on the
program menu, and then press
ENTER/OK.
OSD language
This menu contains various options for the
on-screen display (OSD) language. For
details, see “Setting the OSD language” on
page 11.
Screen saver
Use this feature to turn on or off the
screen saver.
1 In “GENERAL SETUP PAGE”, press 3 / 4
to highlight [SCREEN SAVER], and then
press 2.
ON
Select this if you wish to turn on the screen
saver when disc playback is stopped or
paused for more than 15 minutes.
OFF
Select this to disable the screen saver
function.
2 Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
TIPS:
22 En
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
Sleep timer
This feature automatically sets this unit to
standby mode after a certain elapsed
period.
1 In “GENERAL SETUP PAGE”, press 3 / 4
to highlight [SLEEP], and then press 2.
2 Press 3 / 4 to select a setting.
• You can select from 15, 30, 45 and 60
minutes. Select [OFF] to cancel the
sleep timer function.
3 Press ENTER/OK to confirm your
selection.
Audio setup menu
1 Press SETUP.
2 Press 1 / 2 to select the “Audio Setup”
icon.
3 Press ENTER/OK to confirm your
selection.
AUDIO SETUP PAGE
ANALOG OUTPUT
DIGITAL AUDIO
CD UPSAMPLING
NIGHT MODE
Setup Menu
Set the analog output to match the
playback capability of this unit.
1 In “AUDIO SETUP PAGE”, press 3 / 4 to
highlight [ANALOG OUTPUT], and then
press 2.
STEREO
Select this to change the channel output to
stereo, which only delivers sound from the
two front speakers.
LT/RT
Select this if this unit is connected to a
Dolby Pro Logic decoder.
2 Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
Setting the digital output
The [DIGITAL AUDIO] options are:
“DIGITAL OUTPUT” and “LPCM
OUTPUT”.
1 In “AUDIO SETUP PAGE”, press 3 / 4 to
highlight [DIGITAL AUDIO], and then
press 2.
2 Press 3 / 4 to highlight an option.
3 Press 2 to enter a submenu.
DIGITAL OUTPUT
Set the digital output according to your
optional audio component connections.
OFF
Select this to turn off the digital output.
ALL
Select this if you have connected the digital
audio output jack to a multi-channel
decoder/receiver.
TIPS:
PCM ONLY
Select this only if your receiver is not
capable of decoding multi-channel audio
signals.
Note:
– If your receiver cannot decode DTS, no
sound output from DTS signals in any
mode.
LPCM OUTPUT
Select this if you have connected this unit
to a PCM-compatible receiver via a digital
terminal, such as the coaxial terminal. In
this case, you may need to adjust “LPCM
OUTPUT”.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
48KHz
Select this to play back discs recorded at
the sampling rate of 48 kHz. All 96 kHz
PCM data streams (if available) are
converted to the sampling rate of 48 kHz.
96KHz
Select this to play back discs recorded at
the sampling rate of 96 kHz. If the 96 kHz
disc is copy protected, the digital output is
automatically converted to the sampling
rate of 48 kHz.
4 Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
23 En
English
Setting the analog output
Setup Menu
CD upsampling
Use this feature to convert your music CD
to a higher sampling rate using
sophisticated digital signal processing for
better sound quality. If you activate the
upsampling function, this unit automatically
switches to the stereo mode.
1 In “AUDIO SETUP PAGE”, press 3 / 4 to
highlight [CD UPSAMPLING], and then
press 2.
OFF
Select this to disable CD-upsampling.
88.2kHz (X2)
Select this to convert the sampling rate of
CDs to twice that of the original.
176.4kHz (X4)
Select this to convert the sampling rate of
CDs to four times that of the original.
2 Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
Note:
– This setting is only valid for signals output at
the analog jacks.
ON
Select this to level out the volume. This
feature is only available for movies with the
Dolby Digital mode.
OFF
Select this when you want to enjoy the full
dynamic range of surround sound.
2 Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
Video setup menu
1 Press SETUP.
2 Press 1 / 2 to select the “Video Setup”
icon.
3 Press ENTER/OK to confirm your
selection.
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
COMPONENT
Night mode
In the night mode, high volume output is
softened and low volume output is brought
upward to an audible level. It is useful when
you watch your favorite action movie
without disturbing others at night.
1 In “AUDIO SETUP PAGE”, press 3 / 4
to highlight [NIGHT MODE], and then
press 2.
TIPS:
24 En
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
TV type
Use this feature to select a color system
that matches your TV. For details, see
“Setting a TV type and display” on page 9.
Setup Menu
Set the aspect ratio of this unit to match
your TV. The format you select must be
available on the disc. Otherwise, the TV
display setting will not affect the picture
during playback.
1 In “VIDEO SETUP PAGE”, press 3 / 4
to highlight [TV DISPLAY], and then
press 2.
2 Press 3 / 4 to highlight one of the following
options.
4:3 PAN SCAN
Select this if the aspect ratio of your TV is
4:3 and you want both sides of the picture
to be trimmed or formatted to fit your TV
screen.
4:3 LETTER BOX
Select this if the aspect ratio of your TV is
4:3. In this case, a wide picture with black
bands on the upper and lower portions of
the TV screen are displayed.
16:9
Select this if you have a widescreen TV.
3 Select an item, and then press
ENTER/OK to confirm your selection.
The relationship between the setting of
this unit and the TV display
When the aspect ratio of your TV is 4:3:
Setting
Playback
disc
TV display
16:9
*1
4:3 PAN
SCAN
4:3
16:9
4:3 LETTER
BOX
4:3
When the aspect ratio of your TV is 16:9
(widescreen):
Setting
Playback
disc
TV display
16:9
16:9
4:3
*2
*1: If the disc is not assigned to playback
with panscan, it is played with
letterbox.
*2: The side of the picture may be
stretched depending on the TV. In this
case, check the screen size and aspect
ratio of your TV.
TIPS:
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
25 En
English
Setting the TV display
Setup Menu
Progressive
This feature is only valid if you have
connected this unit to a progressive scan
TV through the component video jacks
(see “Component video jacks <B>” on
page 7).
1 In “VIDEO SETUP PAGE”, press 3 / 4
to highlight [PROGRESSIVE], and then
press 2.
ON
Select this to enable the progressive scan
function.
OFF
Select this to disable the progressive scan
function.
2 Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
Notes on activating progressive scan:
– Ensure that your TV is equipped with
progressive scan.
– Connect using a component video
cable.
– Ensure that “COMPONENT is set to
“YUV” (see “Switching the YUV/RGB”
on page 27).
– When the progressive scan is active, the
VIDEO (CVBS) jack and the AV (SCART)
terminal do not output video signals.
– If no picture is displayed, wait for 15
seconds for this unit to activate
automatic recovery, or deactivate
progressive scan manually as follows:
1 Press / (OPEN/CLOSE) on the
front panel to open the disc tray.
2 Press 1.
3 Press ANGLE.
TIPS:
26 En
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION
TO THE “STANDARD DEFINITION” OUTPUT. IF
THERE ARE QUESTIONS REGARDING OUR
VIDEO MONITOR COMPATIBILITY WITH THIS
MODEL 525P AND 625P DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
This unit is compatible with the complete line of
YAMAHA products, including the projectors
DPX-1300, DPX-830 and the plasma monitor
PDM-4220.
Picture settings
This unit comes with three predefined sets
of picture color settings and one personal
setting that you can define yourself.
1 In “VIDEO SETUP PAGE”, press 3 / 4 to
highlight [PICTURE SETTING], and then
press 2.
STANDARD
Select this for the standard picture setting.
BRIGHT
Select this to make the TV picture
brighter.
SOFT
Select this to make the TV picture softer.
PERSONAL
Select this to personalize your picture
color by adjusting the brightness, contrast,
tint and color (saturation).
2 Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
Setup Menu
PERSONAL PICTURE SETUP
BRIGHTNESS
CONTRAST
TINT
COLOR
0
0
0
0
4 Press 3 / 4 to select one of the following
options.
BRIGHTNESS
Increase the value to brighten the picture
or vice versa. Zero (0) is the average
brightness setting value.
CONTRAST
Increase the value to sharpen the picture
or vice versa. Zero (0) is the average
contrast setting value.
TINT
Increase the value to darken the picture or
vice versa. Zero (0) is the average tint
setting value.
COLOR
Increase the value to enhance the color in
your picture or vice versa. Zero (0) is the
average color setting value.
5 Press 1 / 2 to adjust the setting that best
suits your personal preference.
6 Repeat steps 4–5 to adjust other color
features.
7 Press ENTER/OK to confirm your
selection.
TIPS:
Switching the YUV/RGB
Use this feature to toggle the video signal
output between YUV (Y PB PR) and RGB
(on SCART).
1 In “VIDEO SETUP PAGE”, press 3 / 4 to
highlight [COMPONENT], and then
press 2.
YUV
Select this for the component video
connection.
RGB
Select this for SCART connection.
2 Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
Preference setup menu
1 Press STOP (9) twice to stop playback (if
necessary), and then press SETUP.
2 Press 1 / 2 to select the “Preference
Setup” icon.
3 Press ENTER/OK to confirm your
selection.
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
PASSWORD
DEFAULT
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
27 En
English
3 If you selected [PERSONAL] in step 1,
proceed to steps 4–7:
➜ The “PERSONAL PICTURE SETUP”
menu appears.
Setup Menu
Audio, subtitle and disc menu
These menus contain various language
options for the audio, subtitles and disc
menus recorded on the DVD. For details,
see “Setting the audio, subtitle and disc
menu languages” on page 11.
Restricting playback with
parental control
Some DVDs may have a parental level
assigned to the complete disc or to certain
scenes on the disc. This feature lets you set
a playback limitation level.
The rating levels are from 1 to 8 and are
country dependent. You can prohibit
playback of certain discs that are not
suitable for your children or play certain
discs in alternative scenes.
1 In “PREFERENCE PAGE”, press 3 / 4 to
highlight [PARENTAL], and then press 2.
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
PASSWORD
DEFAULT
1 KID SAFE
2G
3 PG
4 PG 13
5 PGR
6R
7 NC 17
8 ADULT
2 Press 3 / 4 to highlight a rating level for the
inserted disc, and then press ENTER/OK
to confirm your selection.
• To disable parental controls and have all
discs play, select [8 ADULT].
TIPS:
28 En
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
3 Use the numeric buttons (0-9) to enter
the six-digit password (see “Changing the
password” on page 29).
➜ DVDs that are rated above the level you
selected do not play unless you enter
the six-digit password.
Notes:
– VCD, SVCD, and CD have no level
indication, so the parental control function
has no effect with these types of discs. This
also applies to most illegal DVD discs.
– Some DVDs are not encoded with a rating
though the movie rating may be printed on
the disc cover. The rating level feature does
not work for such discs.
PBC (Playback control)
You can turn on or off PBC. This feature is
available only on Video CD 2.0 with the
playback control (PBC) feature. For
details, see “Playback control (PBC)” on
page 17.
MP3/JPEG menu
MP3/JPEG Navigator can be set only if the
disc was recorded with a menu. It allows
you to select different display menus for
easy navigation.
1 In “PREFERENCE PAGE”, press 3 / 4
to highlight [MP3/JPEG NAV], and then
press 2.
Setup Menu
Changing the password
The same password is used for both
Parental Control and Disc Lock. Enter
your six-digit password when prompted
on the screen. The default password is 000
000.
1 In “PREFERENCE PAGE”, press 3 / 4 to
highlight [PASSWORD], and then press 2
to select [CHANGE].
English
WITH MENU
Select this to display only the folder menu
of the MP3/Picture CD.
WITHOUT MENU
Select this to display all the files contained
in the MP3/Picture CD.
2 Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
OK
3 Use the numeric buttons (0-9) to enter
your old six-digit password.
• When doing this for the first time, enter
“000 000”.
• If you forgot your old six-digit
password, enter “000 000”.
4 Enter the new six-digit password.
5 Enter the new six-digit password again to
confirm the password.
➜ The new six-digit password is now valid.
6 Press ENTER/OK to confirm your new
password.
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
PASSWORD
DEFAULT
Resetting the system
CHANGE
2 Press ENTER/OK to enter the
“Password Change Page”.
TIPS:
Setting the DEFAULT function resets all
options and your personal settings to the
initial factory settings, except your
password for PARENTAL and DISC
LOCK.
1 In “PREFERENCE PAGE”, press 3 / 4 to
highlight [DEFAULT], and then press 2 to
select [RESET].
2 Press ENTER/OK to confirm your
selection.
➜ All settings are reset to the initial
factory settings.
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
29 En
Language Code
These codes can be used to select other languages. This does not affect the
options in “AUDIO”, “SUBTITLE” or “DISC MENU”.
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Avestan
Aymara
Azerbaijani
Bashkir
Basque
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosnian
Breton
Bulgarian
Burmese
Castilian, Spanish
Catalan
Chamorro
Chechen
Chewa; Chichewa; Nyanja
Chichewa; Chewa; Nyanja
Chinese
Chuang; Zhuang
Church Slavic; Slavonic;
Church Slavonic; Church
Chuvash
Cornish
Corsican
Croatian
Czech
Danish
Dutch
Dzongkha
English
Esperanto
Estonian
Faroese
Fijian
Finnish
French
Frisian
Gaelic; Scottish Gaelic
Gallegan
Georgian
30 En
6566
6565
6570
8381
6577
6582
7289
6583
6569
6589
6590
6665
6985
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
7889
7889
9072
9065
6785
6785
6786
7587
6779
7282
6783
6865
7876
6890
6978
6979
6984
7079
7074
7073
7082
7089
7168
7176
7565
German
Gikuyu; Kikuyu
Greek,
Guarani
Gujarati
Hausa
Hebrew
Herero
Hindi
Hiri Motu
Hungarian
Icelandic
Ido
Indonesian
Interlingua (International)
Interlingue
Inuktitut
Inupiaq
Irish
Italian
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Khmer
Kikuyu; Gikuyu
Kinyarwanda
Kirghiz
Komi
Korean
Kuanyama; Kwanyama
Kurdish
Kwanyama; Kuanyama
Lao
Latin
Latvian
Letzeburgesch;
Limburgan; Limburger;
Limburger; Limburgan;
Limburgish; Limburger;
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Malay
Malayalam
Maltese
Manx
6869
7573
6976
7178
7185
7265
7269
7290
7273
7279
7285
7383
7379
7368
7365
7369
7385
7375
7165
7384
7465
7486
7576
7578
7583
7575
7577
7573
8287
7589
7586
7579
7574
7585
7574
7679
7665
7686
7666
7673
7673
7673
7678
7684
7666
7775
7771
7783
7776
7784
7186
Language Code
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho, Navajo
Navajo; Navaho
Ndebele, North
Ndebele, South
Ndonga
Nepali
Northern Sami
North Ndebele
Norwegian
Norwegian Bokmål; Bokmål,
Norwegian Nynorsk;
Nyanja; Chichewa; Chewa
Nynorsk, Norwegian;
Occitan (post 1500); Proven
Old Bulgarian; Old Slavonic;
Old Church Slavonic; Old
Old Slavonic; Church
Oriya
Oromo
Ossetian; Ossetic
Ossetic; Ossetian
Pali
Panjabi
Persian
Polish
Portuguese
Provençal; Occitan (post)
Pushto
Quechua
Raeto-Romance
Romanian
Rundi
Russian
Samoan
Sango
Sanskrit
Sardinian
Scottish Gaelic; Gaelic
Serbian
Shona
Sindhi
Sinhalese
Slovak
Slovenian
Somali
7773
7782
7772
7779
7778
7865
7886
7886
7868
7882
7871
7869
8369
7868
7879
7866
7878
7889
7878
7967
6785
6785
6785
7982
7977
7983
7983
8073
8065
7065
8076
8084
7967
8083
8185
8277
8279
8278
8285
8377
8371
8365
8367
7168
8382
8378
8368
8373
8375
8376
8379
Sotho, Southem
South Ndebele
Spanish; Castilian
Sundanese
Swahili
Swati
Swedish
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Turkish
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zhuang; Chuang
Zulu
English
These codes can be used to select other languages. This does not affect the
options in “AUDIO”, “SUBTITLE” or “DISC MENU”.
8384
7882
6983
8385
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9065
9085
31 En
Troubleshooting
Refer to the chart below when this unit does not function properly. If the
problem you are experiencing is not listed below or if the instruction below does
not help, set this unit to the standby mode, disconnect the power cord, and
contact the nearest authorized YAMAHA dealer or service center.
Problem
32 En
Solution
No power
– Check if the AC power cord is properly connected.
– Press STANDBY/ON on the front panel of this unit to turn
on the power.
No picture
– Refer to the manual supplied with your TV for correct Video
In channel selection. Change the TV channel until you see
the DVD screen.
– Check if the TV is turned on.
– Make sure the video signal output setting of this unit matches
the video connection (see “Switching the YUV/RGB” on
page 27).
– If you do not use progressive scan connections (using the
component video (Y PB PR) jacks of this unit) and no picture
is displayed on the TV, follow the steps below to turn off the
progressive scan;
1. Press / (OPEN/CLOSE) on the front panel to open the
disc tray.
2. Press 1 on the remote control.
3. Press ANGLE on the remote control to deactivate
progressive scan. This unit is set to Component/Interlaced
video.
Distorted picture
– Occasionally, a small amount of picture distortion may
appear depending on the disc being played back. This is not
a malfunction.
Completely distorted picture
or black/white picture with
DVD
– Make sure the disc is compatible with this unit (see “Notes
on discs” on page 2).
– Ensure that the TV type of this unit is set to match that of
the disc and your TV (see “Setting a color system for your
TV” on page 9).
The screen size looks
unnatural, or the caption is
displayed only partially on the
TV monitor or is not displayed
at all
– Make sure the TV setting of this unit matches the screen size
of your TV (see “Setting the TV display” on page 25).
– Change the screen size and the aspect ratio of your TV.
No sound or distorted sound
– Adjust the volume.
– Check that the speakers are connected correctly.
Troubleshooting
Solution
No audio at digital output
– Check the digital connections.
– If you are playing a DTS source, check that your receiver can
decode DTS and “DIGITAL OUTPUT” is set to “ALL” (see
page 23).
– If you are playing an MPEG-2 source, check that your
receiver can decode MPEG-2. Otherwise, make sure
“DIGITAL OUTPUT” is set to “PCM ONLY” (see page 23).
– Check if the audio format of the selected audio language
matches your receiver capabilities.
Disc does not play
– The DVD+R/RW, DVD-R/RW, CD-R/RW must be
finalized.
– Ensure the disc label is facing up.
– Check if the disc is defective by trying another disc.
– If you have recorded a picture CD or MP3 CD yourself,
ensure that your disc contains at least 10 pictures or 5 MP3
tracks.
– Region code is incorrect (see “Region codes” on page 2).
Picture freezes momentarily
during playback
– Check the disc for fingerprints/scratches and clean it with a
soft cloth wiping from center to edge.
This unit does not respond to
the remote control
– Aim the remote control directly at the remote control
sensor on the front panel of this unit.
– Reduce the distance of the remote control from this unit.
– Replace the batteries in the remote control.
– Reinsert the batteries with their polarities (+/– signs) as
indicated.
Buttons do not work
– To completely reset this unit, unplug the AC cord from the
AC outlet for 5-10 seconds.
This unit does not respond to
some operating commands
during playback
– Operations may not be permitted by the disc. Refer to the
instructions of the disc jacket.
This unit cannot read CDs/
DVDs
– Use a commonly available CD/DVD lens cleaner to clean
the lens before sending this unit for repair.
Menu items cannot be selected
– Press STOP (9) twice on the remote control before
selecting Setup Menu.
– Depending on the disc availability, some menu items cannot
be selected.
Unable to turn on or off a
progressive scan
– Check that the video signal output is switch to “YUV” (see
“Switching the YUV/RGB” on page 27).
33 En
English
Problem
Glossary
Analog: Sound that has not been turned into
numbers. Analog sound varies, while digital sound
has specific numerical values.These jacks send audio
through two channels, the left and right.
Aspect ratio: The ratio of vertical and horizontal
sizes of a displayed image. The horizontal vs. vertical
ratio of conventional TVs. is 4:3, and that of
widescreens is 16:9.
AUDIO OUT Jacks: Jacks on the back of this
unit that send audio to another system (TV, Stereo,
etc.).
Bit Rate: The amount of data used to hold a given
length of music; measured in kilobits per seconds, or
kbps. Or, the speed at which you record. Generally,
the higher the bit rate, or the higher the recording
speed, the better the sound quality. However, higher
bit rates use more space on a Disc.
Chapter: Sections of a picture or a music piece on
a DVD that are smaller than titles. A title is
composed of several chapters. Each chapter is
assigned a chapter number enabling you to locate
the chapter you want.
Component Video Out Jacks: Jacks on the
back of this unit that send high-quality video to a TV
that has Component Video In jacks (R/G/B,Y/PB/PR,
etc.).
Disc menu: A screen display prepared for allowing
selection of images, sounds, subtitles, multi-angles,
etc. recorded on a DVD.
Digital: Sound that has been converted into
numerical values. Digital sound is available when you
use the digital audio output jacks. These jacks send
audio through multiple channels, instead of just two
channels as analog does.
Dolby Digital: A surround sound system
developed by Dolby Laboratories containing up to
six channels of digital audio (front left and right,
surround left and right, center and subwoofer).
DTS: Digital Theatre Systems. This is a surround
sound system, but it is different from Dolby Digital.
The formats were developed by different companies.
JPEG: A very common digital still picture format. A
still-picture data compression system proposed by
the Joint Photographic Expert Group, which
features small decrease in image quality in spite of its
high compression ratio.
34 En
MP3: A file format with a sound data compression
system. “MP3” is the abbreviation of Motion Picture
Experts Group 1 (or MPEG-1) Audio Layer 3. By using
MP3 format, one CD-R or CD-RW can contain about
10 times as much data volume as a regular CD can.
Parental Control: A function of the DVD to limit
playback of the disc by the age of the users
according to the limitation level in each country.The
limitation varies from disc to disc; when it is
activated, playback will be prohibited if the level of
the software is higher than the user-set level.
PCM (Pulse Code Modulation): A system for
converting analog sound signal to digital signal for
later processing, with no data compression used in
conversion.
Playback control (PBC): Refers to the signal
recorded on video CDs or SVCDs for controlling
reproduction. By using menu screens recorded on a
Video CD or SVCD that supports PBC, you can
enjoy interactive-type software as well as software
having a search function.
Progressive scan: It displays all the horizontal
lines of a picture at one time, as a signal frame. This
system can convert the interlaced video from DVD
into progressive format for connection to a
progressive display. It dramatically increases the
vertical resolution.
Region code: A system for allowing discs to be
played back only in the region designated
beforehand. This unit only plays discs that have
compatible region codes.You can find the region
code of your unit by looking on the product label.
Some discs are compatible with more than one
region (or ALL regions).
S-Video: Produces a clear picture by sending
separate signals for the luminance and the color.You
can use S-Video only if your TV has S- video In jack.
Surround: A system for creating realistic three
dimensional sound fields full of realism by arranging
multiple speakers around the listener.
Title: The longest section of a picture or music
feature on DVD, music, etc., in video software, or
the entire album in audio software. Each title is
assigned a title number enabling you to locate the
title you want.
VIDEO OUT jack: Jack on the back of this unit
that sends video to a TV.
Specifications
TV STANDARD (PAL/50 Hz) (NTSC/60 Hz)
DVD-Video
Video CD & SVCD
CD
PICTURE CD
CD-R, CD-RW
DVD+R, DVD+RW
DVD-R, DVD-RW
Number of lines
Playback
525
(PAL/NTSC)
CONNECTIONS
VIDEO PERFORMANCE
Video (CVBS) output
RGB (SCART) output
Component video output
625
Multistandard
1 Vpp into 75 ohm
0.7 Vpp into 75 ohm
Y: 1 Vpp into 75 ohm
PB/CB PR/CR: 0.7 Vpp into
75 ohm
SCART
Y Output
PB/CB Output
PR/CR Output
Video Output
Audio Output (L+R)
Digital Output
Euroconnector
Cinch (green)
Cinch (blue)
Cinch (red)
Cinch
Cinch
1 coaxial
IEC60958 for CDDA/LPCM
IEC61937 for MPEG 1/2, Dolby
Digital and DTS
AUDIO FORMAT
CABINET
Digital
Dimensions (w x d x h)
Weight
Mpeg/Dolby Digital/ Compressed Digital
DTS
PCM
16, 20, 24 bits
fs, 44.1, 48, 96 kHz
MP3(ISO 9660)
24, 32, 56, 64, 96, 128,
256 kbps
fs, 16, 22.05, 24, 32,
44.1, 48 kHz
WMA
32–192 kbps, mono, stereo
Analog Sound
Stereo
435 x 425 x 75 mm
Approx. 5.5 Kg
POWER SUPPLY
Power inlet
Power usage
Power usage standby
230 V, 50 Hz
Approx. 15 W
<1W
AUDIO PERFORMANCE
DA Converter
24 bit
Signal-Noise (1 kHz)
115 dB
Dynamic range (1 kHz)
100 dB
DVD
fs 96 kHz
fs 48 kHz
SVCD
fs 48 kHz
fs 44.1 kHz
CD/VCD
fs 44.1 kHz
Distortion and Noise (1 kHz)
Specifications are subject to change without
prior notice.
2 Hz - 44 kHz
2 Hz - 22 kHz
2 Hz - 22 kHz
2 Hz - 20 kHz
2 Hz - 20 kHz
0.003%
35 En
English
PLAYBACK SYSTEM
00cv_DV-C6860_G.fm Page 1 Thursday, March 30, 2006 5:04 PM
G
DVD CHANGER
LECTEUR DE DVD CHANGEUR
DV-C6860
DV-C6860
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
2006
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
Printed
in China
3139 245 21861