Yamaha DVD-S1800 Owner's Manual

00cv_DVD-S1800_U.fm Page 1 Thursday, August 2, 2007 4:37 PM
U
CARACTÉRISTIQUES TECHNIQUES
SYSTEME DE LECTURE
STANDARD TV
•
•
•
•
•
•
•
•
•
• Nombre de lignes .....................................PAL: 625, NTSC: 525
• Fréquence verticale .......................... PAL: 50 Hz, NTSC: 60 Hz
• Lecture .......................................... Multistandards (PAL/NTSC)
DVD-Vidéo
DVD-Audio
DVD-R, DVD-RW
DVD+R, DVD+RW, DVD+R DL
Vidéo CD, SVCD
SA-CD multicanaux et SA-CD stéréo
CD
CD D’IMAGES
CD-R, CD-RW
PERFORMANCES VIDEO
• Sortie vidéo (CVBS) ......................................1 Vcc sur 75 ohms
• Sortie S-vidéo............................................Y: 1 Vcc sur 75 ohms
C: 0,3 Vcc sur 75 ohms
• Sortie vidéo composante ...........................Y: 1 Vcc sur 75 ohms
PB/CB, PR/CR: 0,7 Vcc sur 75 ohms
• Sortie RGB (Péritel)
(Modèle pour le Royaume-Uni, l’Europe et la Russie seulement)
.....................................................................0,7 Vcc sur 75 ohms
• Réglage de niveau du noir
(Modèles pour les États-Unis) .......................................Oui/Non
FORMAT AUDIO
• Numérique
Dolby Digital / DTS / MPEG................Numérique compressé
PCM ........................ 16, 20, 24 bits / fs 44,1, 48, 88,2, 96 kHz
MP3 (ISO 9660)
................. 32 –320 kbps / fs 16, 22,05, 24, 32, 44,1, 48 kHz
WMA ............................................ 64–320 kbps, mono, stéréo
• Décodage complet du son multicanaux Dolby Digital et DTS
• Son stéréo analogique
• Mixage compatible avec le Dolby Surround à partir d’un son
multicanaux Dolby Digital
PERFORMANCES AUDIO
•
•
•
•
Convertisseur NA.............................................. 24 bits, 192 kHz
Rapport Signal sur Bruit (1 kHz) ....................................115 dB
Plage dynamique (1 kHz).................................................105 dB
DVD......................................................fs 96 kHz, 2 Hz–44 kHz
fs 48 kHz, 2 Hz–22 kHz
• SVCD....................................................fs 48 kHz, 2 Hz–22 kHz
fs 44,1 kHz, 2 Hz–20 kHz
• CD/VCD ............................................fs 44,1 kHz, 2 Hz–20 kHz
• Distorsion et Bruit (1 kHz) ............................................. 0,002%
DVD AUDIO/VIDEO SA-CD PLAYER
LECTEUR DVD AUDIO/VIDEO SA-CD
RACCORDEMENTS
• Sortie vidéo ........................................................1 (Cinch: jaune)
• Sortie S-vidéo........................................1 (Mini DIN, 4 broches)
• Sortie vidéo composante
Sortie Y ............................................................. 1 (Cinch: vert)
Sortie PB/CB .................................................... 1 (Cinch: bleu)
Sortie PR/CR ................................................... 1 (Cinch: rouge)
• Péritel (Modèles pour le Royaume-Uni,
l’Europe et la Russie seulement)
.............................................................................1 (Prise péritel)
• Sortie numérique
Coaxiale ....................................................... 1 (Cinch: orange)
Optique.............................. 1 (IEC 60958 pour CDDA/LPCM,
IEC 61937 pour MPEG 1/2, Dolby Digital, DTS)
HDMI ......................................................................1 (Type A)
• Sortie analogique 2 canaux (G+D)
........................................................ 1 paire (Cinch: blanc/rouge)
• Sortie analogique 6 canaux
Audio avant G/D ......................... 1 paire (Cinch: blanc/rouge)
Audio ambiance G/D .................. 1 paire (Cinch: blanc/rouge)
Audio Centre .....................................................1 (Cinch: noir)
Audio Caisson de graves...................................1 (Cinch: noir)
DVD-S1800
CABINET
• Dimensions (L x P x H) ............................ 435 x 284,5 x 87 mm
• Poids.................................................................... Approx. 3,3 kg
ALIMENTATION
• Prise d’alimentation commutée
Modèles pour le Canada et les États-Unis ... CA 120 V, 60 Hz
Modèles pour l’Europe, y compris le Royaume-Uni.... CA 230 V, 50 Hz
Modèles pour la Corée et Taïwan.... CA 100–240 V, 50/60 Hz
Modèle pour l’Asie ......................... CA 100–240 V, 50/60 Hz
Modèle pour la Russie................................. CA 230 V, 50 Hz
• Consommation ......................................................Approx. 21 W
• Consommation (veille)................................... inférieure à 0,5 W
Les caractéristiques peuvent être modifiées sans préavis.
© 2007
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
All rights reserved.
Printed in China
CQX1A1275Z
HDMI
STANDBY
ON
AUDIO DIRECT
01EN_DVD-S1800_U.book Page i Thursday, July 19, 2007 1:28 PM
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
• Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert you to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert you to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
1
Read Instructions — All the safety and operating instructions
should be read before the product is operated.
2 Retain Instructions — The safety and operating instructions
should be retained for future reference.
3 Heed Warnings — All warnings on the product and in the
operating instructions should be adhered to.
4 Follow Instructions — All operating and use instructions should
be followed.
5 Cleaning — Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
6 Attachments — Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
7 Water and Moisture — Do not use this product near water — for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming pool; and the like.
8 Accessories — Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage to the
product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the product.
Any mounting of the product should follow the manufacturer’s
instructions, and should use a mounting accessory recommended
by the manufacturer.
9 A product and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart
combination to overturn.
10 Ventilation — Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these openings must
not be blocked or covered. The openings should never be blocked
by placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
11 Power Sources — This product should be operated only from the
type of power source indicated on the marking label. If you are
not sure of the type of power supply to your home, consult your
product dealer or local power company. For products intended to
operate from battery power, or other sources, refer to the
operating instructions.
i En
12 Grounding or Polarization — This product may be equipped with
a polarized alternating current line plug (a plug having one blade
wider than the other). This plug will fit into the power outlet only
one way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
13 Power-Cord Protection — Power-supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and the point where they exit
from the product.
14 Lightning — For added protection for this product during a
lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the product
due to lightning and power-line surges.
15 Power Lines — An outside antenna system should not be located
in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or
circuits as contact with them might be fatal.
16 Overloading — Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in a risk of fire
or electric shock.
17 Object and Liquid Entry — Never push objects of any kind into
this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
18 Servicing — Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified service personnel.
19 Damage Requiring Service — Unplug this product from the wall
outlet and refer servicing to qualified service personnel under the
following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and
will often require extensive work by a qualified
technician to restore the product to its normal operation,
e) If the product has been dropped or damaged in any way,
and
f) When the product exhibits a distinct change in
performance - this indicates a need for service.
20 Replacement Parts — When replacement parts are required, be
sure the service technician has used replacement parts specified
by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.
21 Safety Check — Upon completion of any service or repairs to
this product, ask the service technician to perform safety checks
to determine that the product is in proper operating condition.
22 Wall or Ceiling Mounting — The unit should be mounted to a
wall or ceiling only as recommended by the manufacturer.
23 Heat — The product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
01EN_DVD-S1800_U.book Page ii Thursday, July 19, 2007 1:28 PM
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications
not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/
s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your
FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B”
digital devices.
Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential
environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio
frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful
to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur
in all installations. If this product is found to be the source of interference, which can be determined by turning the product
“OFF” and “ON”, please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type
of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6660 Orangethorpe Ave.
Buena Park, CA90622.
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.
We Want You Listening For A Lifetime
Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment
by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion - and,
most importantly, without affecting your sensitive hearing.
Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries
Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.
For Customer Use:
Read carefully the information located at the rear panel of this
unit and enter below the Serial No. Retain this information for
future reference.
Model No.
Serial No. __________________________
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
CAUTION-VISIBLE AND INVISIBLE
LASER RADIATION WHEN OPEN. DO NOT
STARE INTO BEAM OR VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS.
DANGER
This unit emits visible laser radiation when open. Avoid direct
eye exposure to beam.
When this unit is plugged into a wall outlet, do not place your
eyes close to the opening of the disc tray and other openings or
look inside.
ii En
English
FCC INFORMATION (for US customers)
01EN_DVD-S1800_U.book Page iii Thursday, July 19, 2007 1:28 PM
CAUTION: READ THIS BEFORE OPERATING THIS UNIT.
CAUTION: READ THIS BEFORE OPERATING THIS UNIT.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Install this unit in a well ventilated, cool, dry, clean place
— away from direct sunlight, heat sources, vibration,
dust, moisture, or cold. In a cabinet, allow about 2.5 cm
(1 inch) of free space all around this unit for adequate
ventilation.
Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
Do not expose this unit to sudden temperature changes
from cold to hot, nor locate this unit in an environment
with high humidity (i.e., a room with a humidifier) to
prevent condensation inside this unit, which may cause an
electrical shock, fire, damage to this unit, and/or personal
injury.
Avoid installing this unit in a location where foreign
objects may fall onto this unit or where this unit may be
exposed to liquid dripping or splashing. On the top of this
unit, do not place:
– Other components, as they may cause damage and/
or discoloration on the surface of this unit.
– Burning objects (i.e., candles), as they may cause
fire, damage to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall,
spilling the liquid and causing an electrical shock to
the user and/or damage to this unit.
Do not cover this unit with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation. If the
temperature inside this unit rises, it may cause fire,
damage to this unit, and/or personal injury.
Do not plug in this unit to a wall outlet until all
connections are complete.
Do not operate this unit upside-down. It may overheat,
possibly causing damage.
Do not use excessive force on switches, knobs and/or
cords.
When disconnecting the power cord from the wall outlet,
grasp the plug; do not pull the cord.
Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
Use only the voltage specified on this unit. Using this unit
with a higher voltage than specified is dangerous and may
cause fire, damage to this unit, and/or personal injury.
Yamaha will not be held responsible for any damage
resulting from use of this unit with a voltage other than as
specified.
Do not attempt to modify or fix this unit. Contact
qualified Yamaha service personnel when any service is
needed. The cabinet should never be opened for any
reason.
When not planning to use this unit for long periods of
time (i.e., vacation), disconnect the AC power plug from
the wall outlet.
iii En
15 Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that this unit
is faulty.
16 Before moving this unit, press STANDBY/ON to set the
unit in standby mode, then disconnect the AC power plug
from the wall outlet.
17 Install this unit near the AC outlet and where the AC
power plug can be reached easily.
18 The batteries shall not be exposed to excessive heat such
as sunshine, fire or the like.
The unit is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this unit
itself is turned off. This state is called the standby mode. In
this state, this unit is designed to consume a very small
quantity of power.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
LASER SAFETY
This unit employs a laser. Due to possible eye injury, only a
qualified service person should remove the cover or attempt
to service this device.
LASER
Type
Wave length
Output Power
Beam divergence
Semiconductor laser GaAlAs
650 nm (DVD)
790 nm (VCD/CD)
1.45 mW (DVD)
1.13 mW (VCD/CD)
60 degrees
01EN_DVD-S1800_U.book Page 1 Thursday, July 19, 2007 1:28 PM
INTRODUCTION
3
Playable disc formats ...................................
DVD region codes ..............................................
Patent information ........................................
Cleaning discs ..............................................
Supplied accessories ...................................
FUNCTIONAL OVERVIEW
5
Front panel ....................................................
Front panel display .......................................
Rear panel .....................................................
Remote control .............................................
CONNECTIONS
General notes on connections ..................
Audio connections .....................................
Connecting a stereo amplifier ...........................
Connecting an AV receiver with 6ch/
multi-channel input .......................................
Video connections ......................................
HDMI connection ........................................
Connecting the power cable ......................
GETTING STARTED
Step 1: Inserting batteries into
the remote control ...................................
Using the remote control ..................................
Step 2: Turning on the power ....................
Step 3: Setting a TV type ............................
Step 4: Setting a language preference .....
Setting the OSD (On-Screen Display)
language ........................................................
Setting the audio, subtitle and
disc menu languages .....................................
3
3
4
4
4
5
6
7
8
10
10
10
10
10
11
12
14
15
15
15
15
16
17
17
17
DISC OPERATION
English
CONTENTS
18
Basic operation ........................................... 18
Pausing playback ............................................... 18
Selecting a track/chapter ................................... 18
Searching backward/forward ............................ 19
Repeat playback .......................................... 19
Repeating playback ........................................... 19
Repeating a section
(except DVD-Audio/MP3/WMA/JPEG) ...... 19
Random playback
(except DVD/SA-CD) ................................ 19
Program playback (CD) .............................. 20
Disc menu operation
(DVD/VCD/SVCD) ..................................... 20
Using the DVD menu ........................................ 20
Using the Video CD playback control (PBC)
menu (VCD/SVCD) ...................................... 21
On-screen display (OSD) menu
(DVD/VCD/SVCD/SA-CD) ........................ 21
Using the OSD menu
(DVD/VCD/SVCD/CD) ............................... 21
Displaying text information (SA-CD) ............... 22
Picture Setting menu
(DVD/VCD/SVCD) ..................................... 22
Adjusting picture settings .................................. 22
Zooming pictures
(DVD-Video/VCD/SVCD/DivX®/JPEG) .... 23
Viewing angles (DVD-Video) ...................... 23
Audio and Subtitle languages
(DVD-Video/VCD) ..................................... 24
Selecting an audio language .............................. 24
Selecting a subtitle language
(DVD-Video) ................................................ 24
DivX® external subtitle files ....................... 24
Changing pages (DVD-Audio) .................... 24
Group/File selection (DVD-Audio/DivX®/
MP3/WMA/Kodak picture CD) ................. 25
Selecting a group (DVD-Audio) ....................... 25
Selecting a file in a folder
(DivX®/MP3/WMA/Kodak picture CD) ...... 25
Bonus group playback
(DVD-Audio) ............................................. 25
Changing the playback area
and layer (SA-CD) .................................... 25
Multimedia file playback
(MP3/WMA/DivX®/JPEG) ......................... 26
Displaying the thumbnail screen (JPEG) .......... 26
Rotating pictures (JPEG) ................................... 26
Continued
1 En
01EN_DVD-S1800_U.book Page 2 Thursday, July 19, 2007 1:28 PM
CONTENTS
SETUP MENU
27
Menu overview ............................................ 27
Setup menu operation ................................ 28
General setup menu ................................... 29
Selecting DVD-Audio mode ............................. 29
Selecting SA-CD mode ..................................... 29
Setting the OSD language ................................. 29
Restricting playback with parental control ....... 29
Changing the parental password ....................... 29
Setting the screen saver ..................................... 30
Setting the auto power function ........................ 30
Setting the sleep timer ....................................... 30
Resetting the system ......................................... 30
Displaying the DivX® VOD
registration code ............................................ 30
Audio setup menu ...................................... 31
Setting the analog output .................................. 31
Setting the digital output ................................... 31
Setting the LPCM output .................................. 31
Setting the night listening mode ....................... 31
Speaker setup menu ................................... 32
Setting speaker sizes ......................................... 32
Setting speaker distances .................................. 32
Setting speaker levels ........................................ 33
Setting the SA-CD configuration ...................... 33
Video setup menu ....................................... 34
Setting the TV display ...................................... 34
Setting the TV type ........................................... 34
Selecting the wide screen format ...................... 34
Selecting the black level
(U.S.A. and Canada models only) ................ 35
Selecting the closed caption
(U.S.A. and Canada models only) ................ 35
Setting the still mode ........................................ 35
Selecting the scan function ............................... 35
Switching the SCART video out
(U.K., Europe, and Russia models only) ...... 36
HDMI setup menu ....................................... 36
Setting the HDMI video .................................... 36
Selecting the DVI output range ........................ 37
Setting the HDMI audio .................................... 37
DISC setup menu ........................................ 37
Selecting the default audio/subtitle/
DVD menu language .................................... 37
Selecting an angle mark display ....................... 37
Selecting the PBC (playback control)
function ......................................................... 38
Setting the duration for a slide show ................ 38
2 En
LANGUAGE CODE LIST
39
TROUBLESHOOTING
40
GLOSSARY
42
SPECIFICATIONS
44
01EN_DVD-S1800_U.book Page 3 Thursday, July 19, 2007 1:28 PM
INTRODUCTION
Thank you for purchasing this unit. This Owner’s Manual
explains the basic operation of this unit.
• Illustrations in this manual are based on the U.K.,
Europe, and Russia models unless otherwise specified.
• Notes contain important information about safety and
operating instructions.
• y indicates a tip for your operation.
• This manual is printed prior to production. Design and
specifications are subject to change in part as a result of
improvements, etc. In case of differences between the
manual and the product, the product has priority.
Playable disc formats
• This unit is designed for use with the following discs:
DVD-Video, DVD-Audio, DVD-R, DVD-RW,
DVD+R, DVD+RW, DVD+R DL, Video CD,
Super Video CD, Super Audio CD (SA-CD), Audio CD,
CD-R and CD-RW.
English
INTRODUCTION
Notes
• CD-R(W), DVD-R(W) and DVD+R(W) cannot be played
unless finalized.
• Copyright-protected WMA files cannot be played with this
unit.
• This unit supports JPEG files of 2848 x 2136 pixels in size.
• Some discs cannot be played depending on the recording
conditions, such as the PC environment and application
software. The characteristics and condition of some discs;
materials, scratches, curvature, etc., may result in playback
failure.
• Be sure to use only CD-R(W), DVD-R(W) and DVD+R(W)
discs made by reliable manufacturers.
• Do not use any non-standard shaped discs (heart-shaped, etc.).
• Do not use discs with tape, seals, or paste on their surface.
Doing so may damage this unit.
• Do not use discs affixed with labels printed by a commercially
available label printer.
DVD region codes
This unit is designed to support the region management
system. Check the regional code number on the DVD disc
package. If the number does not match the region code of
this unit (see the table below or the back of this unit), this
unit may be unable to play the disc.
Destination
• This unit can play:
– MP3, WMA (except copyright-protected WMA) and
picture (Kodak, JPEG) files recorded on CD-R(W)/
DVD-R(W)/DVD+R(W)
– JPEG/ISO 9660 format
– Maximum 14 character display
– DivX® disc on CD-R(W)/DVD-R(W)/DVD+R(W)
– Official DivX® Certified product
– Plays all versions of DivX® video (including
DivX® 6) with standard playback of DivX® media
files
Region code
of this unit
Playable discs
U.S.A.
Canada
1
1
ALL
U.K.
Europe
2
2
ALL
Asia
Korea
3
3
ALL
5
5
ALL
Russia
3 En
01EN_DVD-S1800_U.book Page 4 Thursday, July 19, 2007 1:28 PM
INTRODUCTION
Patent information
–
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
Cleaning discs
• When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center out. Do not wipe in
a circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, or antistatic spray
intended for analog records.
“DTS” and “DTS Digital Surround” are registered
trademarks of DTS, Inc.
Supplied accessories
DivX, DivX Certified, and associated logos are
trademarks of DivX, Inc. and are used under license.
Check your package to make sure it contains the following
items:
Remote
control
“DCDi” is a trademark of Faroudja, a division of Genesis
Microchip, Inc.
Batteries (x2)
(AAA, R03, UM-4)
POWER
DIMMER
HDMI AUDIO DIRECT STANDBY
GROUP
MULTI 2CH
PAGE
PROG
“HDMI”, the “HDMI” logo and “High Definition
Multimedia Interface” are trademarks or registered
trademark of HDMI Licensing LLC.
RANDOM
A B
CLEAR
ENTER
SETUP
SLOW SEARCH
STOP
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
4 En
Audio pin cable
REPEAT
PAUSE
PLAY
SKIP
TOP MENU
ON SCREEN
Video pin cable
ENTER
MENU
RETURN
SUBTITLE AUDIO ANGLE ZOOM
Power cable
01EN_DVD-S1800_U.book Page 5 Thursday, July 19, 2007 1:28 PM
FUNCTIONAL OVERVIEW
English
FUNCTIONAL OVERVIEW
Front panel
1
HDMI
AUDIO DIRECT
STANDBY
ON
2
3 4
5
6
7 8
9
0
1 Disc tray
Load a disc in the disc tray.
6
2 STANDBY/ON
Turns on this unit or sets it to the standby mode.
7 b/w
Searches backward.*
Moves to the previous chapter or track.
3 HDMI indicator
Lights up green when an HDMI component is
recognized by this unit and the HDMI mode is set to
on.
Lights up orange when no HDMI component is
recognized by this unit while the HDMI mode is set to
on.
Opens or closes the disc tray.
8 f/a
Searches forward.*
Moves to the next chapter or track.
9 p/e
Starts or pauses playback.
4 AUDIO DIRECT indicator
Lights up when you select the AUDIO DIRECT mode
by pressing AUDIO DIRECT on the remote control.
0 s
Stops playback.
5 Front panel display
Displays playback information or settings.
* Press and hold the button for about two seconds.
5 En
01EN_DVD-S1800_U.book Page 6 Thursday, July 19, 2007 1:28 PM
FUNCTIONAL OVERVIEW
Front panel display
1
2
SVCD WMA P.SCAN TITLE GROUP CHP/ TRK
MP3
JPEG
DVD AUDIO
SA-CD DivX
3
4
D
6
5
2
MULTI D.MIX PROG. RANDOM ALL A
B
7
1 P.SCAN indicator
Lights up when the progressive scan function is
activated.
5 D.MIX indicator (DVD-Audio only)
Lights up when playing the disc that allows down
mixing of the multi-channel audio source.
2 Playback mode indicators
Display the icon for the selected playback mode.
6 Disc indicators
Display the icon for the disc type.
3 Decoder indicators
Display the icon for the selected internal decoder.
7 Information display
Displays various information such as a title/chapter/
track number or elapsed playing time.
4 MULTI indicator
Lights up when playing the multi-channel audio
source.
y
You can adjust the brightness of the front panel display using
DIMMER on the remote control.
6 En
01EN_DVD-S1800_U.book Page 7 Thursday, July 19, 2007 1:28 PM
FUNCTIONAL OVERVIEW
1
English
Rear panel
2
3
4
5
6
7
MAINS
PR / CR
CENTER
L
COAXIAL
VIDEO
IN
L
AV
PB / CB
Y
R
MIXED 2CH
FRONT
R
SUBWOOFER SURROUND
AUDIO OUT
8
OPTICAL
DIGITAL
OUT
ON
OFF
RS 232C
HDMI
S VIDEO
REMOTE CONTROL
9
COMPONENT
VIDEO OUT
0
q
w
(U.K., Europe, and Russia models)
1 AUDIO OUT (6ch discrete) jacks
Connect to the 6ch input jacks of your AV receiver.
7 MAINS
Connect the supplied power cable.
2 DIGITAL (COAXIAL) jack
Connect to the coaxial input jack of your AV receiver.
8 AUDIO OUT (MIXED 2CH) jacks
Connect to the audio input jacks of your AV receiver or
stereo system.
3 REMOTE CONTROL (IN/OUT) connectors
Use in custom installations to transmit remote control
signals via cable connections.
4 REMOTE CONTROL (RS-232C) terminal
(U.S.A., Canada, U.K., Europe, and Russia
models only)
Use as an expansion terminal for commercial use.
Consult your dealer for details.
5 AV terminal
(U.K., Europe, and Russia models only)
Connect to SCART input terminal of your TV.
9 DIGITAL (OPTICAL) jack
Connect to the optical input jack of your AV receiver.
0 HDMI jack
Connect to the HDMI input jack of your HDMI
component.
q VIDEO OUT (S VIDEO) jack
Connect to the S-video input jack of your AV receiver.
w VIDEO OUT (COMPONENT) jacks
Connect to the component input jacks of your AV
receiver.
6 VIDEO OUT (VIDEO) jack
Connect to the composite video input jack of your AV
receiver.
■ Remote control connectors and RS-232C terminal
The REMOTE CONTROL (IN/OUT) connectors and the REMOTE CONTROL (RS-232C) terminal are used in
custom installation. Keep the RS-232C switch set to OFF and do not connect any cables to these connectors during
normal use.
Caution: Do not touch the inner pins of the jacks on the rear panel of this unit. Electrostatic discharge
may cause permanent damage to this unit.
7 En
01EN_DVD-S1800_U.book Page 8 Thursday, July 19, 2007 1:28 PM
FUNCTIONAL OVERVIEW
1 DIMMER
Selects from three different levels of brightness for the
front panel display: bright, dim and auto.
For auto setting, brightness is automatically set to low
only during playback.
Remote control
POWER
1
2
3
4
DIMMER
HDMI AUDIO DIRECT STANDBY
GROUP
MULTI 2CH
PAGE
y
u
i
o
PROG
p
RANDOM
a
5
REPEAT
A B
6
7
CLEAR
ENTER
SETUP
SLOW SEARCH
STOP
PAUSE
PLAY
h
8
9
0
y
• You can select the HDMI resolution by pressing HDMI on
the remote control repeatedly or by using the HDMI Video
setup menu.
• If you press HDMI on the remote control once, the
currently selected resolution setting is displayed in the top
left corner of the display and in the front panel display.
3 GROUP
Selects the DVD-Audio group (see page 25).
SKIP
TOP MENU
q
w
ON SCREEN
j
ENTER
MENU
RETURN
k
e
SUBTITLE AUDIO ANGLE ZOOM
r
t
s
d
f
g
2 HDMI
Switches between the HDMI resolution settings or
turns off the HDMI mode (see page 36).
l
;
4 PAGE (+/–)
Selects the DVD-Audio still picture (see page 24).
5 Numeric buttons (0-9)
Select numbered items in the currently displayed
menu.
6 CLEAR
Clear the mode or setting (see page 20).
7 SETUP
Accesses or exits from the setup menu of this unit
(see page 28).
8 STOP ( 7 )
Stops playback (see page 18).
9 PAUSE ( 8 )
Pauses playback temporarily (see page 18).
Frame-by-frame playback (see page 18).
0 SKIP (l22 / 33l)
Moves to the previous/next chapter or track.
q TOP MENU
Displays the top-level disc menu.
y
The title menu is displayed for discs with the title menu.
8 En
01EN_DVD-S1800_U.book Page 9 Thursday, July 19, 2007 1:28 PM
FUNCTIONAL OVERVIEW
ENTER
Confirms the menu selection.
e MENU
Accesses the menu of a disc (see page 20).
r SUBTITLE
Selects the subtitle language (see page 24).
t AUDIO
Selects the audio language or format (see page 24).
y POWER ( l )
Turns on this unit (see page 15).
u STANDBY ( )
Sets this unit to the standby mode (see page 15).
i AUDIO DIRECT
Turns off the video output during audio disc playback
in order to improve audio quality. Press again to turn on
the video output. This function is not available when an
HDMI component is recognized by this unit.
In the AUDIO DIRECT mode, the front panel display
goes out. Once this unit is turned off, the AUDIO
DIRECT mode is cleared (only when an SA-CD disc is
played back, the mode is cleared if the disc tray is
opened/closed).
d A-B
Repeats a specific segment (see page 19).
English
w Cursors (
/
/ / )
Selects an item in the currently displayed menu.
f ENTER
Confirms the menu selection.
g SLOW / SEARCH (22 / 33)
Searches backward or forward (see page 19).
h PLAY ( 3 )
Starts playback (see page 18).
j ON SCREEN
Accesses or exit from the on-screen display (OSD)
menu of this unit (see page 21).
Press twice during playback to access the Picture
Setting menu (see page 22).
k RETURN
Returns to the previous setup menu.
l ZOOM
Enlarges the video image (see page 23).
; ANGLE
Selects the DVD camera angle (see page 23).
y
Two ENTER buttons (w and f) act in the same way.
o MULTI / 2CH
Selects a sound mode: Stereo or Multi-channel.
Changes the SA-CD playback area (see page 25).
p PROG
Accesses the program setup menu to program disc
tracks or exit from its menu (see page 20).
a RANDOM
Plays tracks in random order (see page 19).
s REPEAT
Repeats the chapter, track, title, group or disc
(see page 19).
9 En
01EN_DVD-S1800_U.book Page 10 Thursday, July 19, 2007 1:28 PM
CONNECTIONS
CONNECTIONS
General notes on connections
Be sure to turn off this unit and unplug the power supply
cable, before you make or change connections.
• Depending on the component you want to connect, there
are various ways to make connections. Possible
connections are described below.
• Refer to the manuals supplied with your other
components as necessary to make the best connections.
• Do not connect this unit via your VCR. The video
quality could be distorted by the copy protection system.
• Do not connect the audio out jack of this unit to the
phono in jack of your audio system.
Connecting an AV receiver with 6ch/
multi-channel input
■ Analog connections
If you want to reproduce multi-channel Super Audio CD
(SA-CD) and DVD-Audio, connect AUDIO OUT (6ch
discrete) jacks of this unit to the corresponding input
jacks of your AV receiver using commercially available
audio pin cables.
CENTER
L
COAXIAL
IN
L
AV
Audio connections
R
MIXED 2CH
FRONT
R
SUBWOOFER SURROUND
AUDIO OUT
OPTICAL
OUT
ON
DIGITAL
OFF
RS 232C
This unit (U.K., Europe,
and Russia models)
Connecting a stereo amplifier
Connect AUDIO OUT (MIXED 2CH) jacks of this unit to
the corresponding input jacks of your audio component
(such as a stereo amplifier) using the supplied audio pin
cable. You can connect a subwoofer to the
SUBWOOFER jack.
FRONT
R
L
CENTER SUBWOOFER
SURROUND
R
L
AV receiver
This unit (U.K., Europe, and Russia models)
Speakers
CENTER
COAXIAL
IN
L
L
AV
R
MIXED 2CH
R
FRONT
SUBWOOFER
AUDIO OUT
SURROUND
OPTICAL
DIGITAL
OUT
OFF
ON
RS 232C
HDMI
REMOTE CONTROL
Audio pin cable
(supplied)
Stereo
amplifier
CD / DVD
R
L
Subwoofer
Left
speaker
10 En
Right
speaker
HDMI
REMOTE CONTROL
This unit has digital coaxial, digital optical, analog 6ch
discrete, and analog mixed 2ch output jacks. Connection
depends on the availability of audio jacks on your
component.
01EN_DVD-S1800_U.book Page 11 Thursday, July 19, 2007 1:28 PM
CONNECTIONS
If you want to use the Dolby Digital, DTS, or MPEG
function on your AV receiver, connect DIGITAL
(OPTICAL) <A> or DIGITAL (COAXIAL) <B> jack of
this unit to the corresponding input jacks of your AV
receiver using a commercially available digital optical or
digital coaxial cable.
CENTER
COAXIAL
L
FRONT
SUBWOOFER
R
SURROUND
AUDIO OUT
OPTICAL
This unit has SCART, composite video, S-video, and
component video output jacks. If your AV receiver has
video output jacks, connect your receiver and then your
TV so that you can use one TV for several different video
sources (LD, VCR, etc.) by simply switching the input
source selector on your receiver.
Use the one that corresponds to the input jacks on the
component to be connected.
IN
L
This unit (U.K., Europe, and Russia models)
AV
R
MIXED 2CH
Video connections
OUT
DIGITAL
ON
OFF
RS 232C
HDMI
REMOTE CONTROL
PR / CR
VIDEO
AV
This unit (U.K.,
Europe, and
Russia models)
PB / CB
Y
RS 232C
S VIDEO
HDMI
ONTROL
<A>
OPTICAL
IN
<B>
COAXIAL
IN
COMPONENT
VIDEO OUT
Video
pin cable
(supplied)
<A>
<B>
<C>
<D>
AV receiver
VIDEO
IN
S-VIDEO
IN
PB/CB PR/CR Y
COMPONENT VIDEO IN
Speakers
AV
receiver
Notes
• If you make a connection with <A> or <B>, set [Digital Out]
to [All] (see “Setting the digital output” on page 31).
• If the audio format of the digital output does not match the
capabilities of your receiver, the receiver produces a distorted
sound or no sound at all. Make sure to select the appropriate
audio format from the menu screen on the disc.
Pressing AUDIO on the remote control once or more may
change not only the audio languages but also the audio format.
• SA-CD audio signals are not output from DIGITAL
(COAXIAL/OPTICAL) jacks.
• If you want to enjoy Dolby Digital, DTS, and MPEG formats,
you must connect this unit to an AV receiver that supports
these formats.
VIDEO
OUT
S VIDEO
OUT
COMPONENT
VIDEO OUT
VIDEO
IN
S VIDEO
IN
COMPONENT
VIDEO IN
TV
11 En
English
■ Digital connections
01EN_DVD-S1800_U.book Page 12 Thursday, July 19, 2007 1:28 PM
CONNECTIONS
■ Composite video jack <A>
Connect VIDEO OUT (VIDEO) jack of this unit to the
video input jack of your AV receiver, and then to that of
your TV using the supplied video pin cable.
■ S-video jack <B>
S-video connections achieve a clearer picture than
composite video connections by transmitting video signals
on separate wires for luminance (Y) and chrominance (C).
Connect VIDEO OUT (S VIDEO) jack of this unit to
S-video input jack of your AV receiver, and then to that of
your TV using a commercially available S-video cable.
HDMI connection
HDMI (High-Definition Multimedia Interface) provides
high quality digital audio and video on a single
connection.
Connect the HDMI jack of this unit to an HDMI input jack
of your AV receiver, and then to that of your TV using a
commercially available HDMI cable.
If your receiver does not have an HDMI input jack, you
can achieve a better video image by connecting the HDMI
jack of this unit directly to the HDMI input jack of your
TV.
■ Component video jacks <C>
Component video connections achieve higher fidelity
color reproduction than S-video connections by
transmitting video signals on separate wires for luminance
(Y: green) and chrominance (PB: blue, PR: red). Connect
VIDEO OUT (COMPONENT) jacks of this unit to the
component input jacks of your AV receiver, and then to
those of your TV using a commercially available
component cable. Observe the color of each jack when
you make connections.
If your receiver does not have component output jacks,
you can achieve a better video image by connecting the
component output jacks of this unit directly to the
component input jacks of your TV.
CENTER
COAXIAL
L
IN
L
AV
R
MIXED 2CH
FRONT
SUBWOOFER
AUDIO OUT
R
SURROUND
OPTICAL
OUT
DIGITAL
ON
OFF
RS 232C
HDMI
REMOTE CONTROL
This unit (U.K., Europe, and
Russia models)
HDMI
IN
■ SCART terminal <D>
(U.K., Europe, and Russia models only)
AV receiver
If your TV has only a terminal for video input, you can
connect the TV directly to this unit.
Connect AV terminal of this unit to SCART input terminal
of your TV using a commercially available SCART cable.
HDMI OUT
HDMI IN
Notes
• Ensure that the “TV” indication on SCART cable is connected
to the TV set and “DVD” indication on SCART cable is
connected to this unit.
• S-video signal is not output at AV terminal. See page 36 for
SCART video setting.
Speakers
TV
Notes
• You need to make appropriate audio connections if the
connected component does not input audio signals (see
page 10).
• This unit is not compatible with HDCP-incompatible HDMI or
DVI components.
• You need a commercially available HDMI/DVI conversion
cable when you connect this unit to other DVI components. In
this case, you need to use another audio connection to this
connection because the HDMI jack of this unit does not output
any audio signals.
• Do not disconnect or turn off the power of the HDMI/DVI
component connected to the HDMI jack of this unit while data
is being transferred. Doing so may disrupt playback or cause
noise.
y
When connecting an HDMI component, refer to the manual
supplied with your component.
12 En
01EN_DVD-S1800_U.book Page 13 Thursday, July 19, 2007 1:28 PM
CONNECTIONS
English
■ HDMI video output
This unit is compatible with the following video formats:
480p/60 Hz, 576p/50 Hz, 720p/50 Hz, 60 Hz, 1080i/50 Hz, 60 Hz, and 1080p/50 Hz, 60 Hz.
Notes
• You need to select one of the HDMI resolution settings by pressing HDMI on the remote control repeatedly or by using the HDMI
Video setup menu (see page 36).
• Depending on the connected DVI component, black and white in the image may not be distinct. In this case, adjust the picture setting
of the connected DVI component.
■ HDMI audio output
Analog output
setting
Audio format
Dolby Digital
DVD-Video
DTS
MPEG
PCM 2ch*4
DVD-Audio
CD/MP3/
WMA/DivX®
DTS-CD
VCD
SVCD
SA-CD
Multi
Multi-channel
Stereo
Multi-channel
Stereo
Multi-channel
Stereo
HDMI Audio
Auto*1
Dolby Digital
DTS
MPEG
PCM
PCM
PCM 2ch
PCM multi*2
PCM 2ch
PCM multi*2
PCM 2ch
Multi-channel/Stereo
PCM 2ch
PCM 2ch
Multi-channel
PCM (PPCM) multi*2,3
PCM (PPCM) multi*2,3
Stereo
PCM (PPCM) 2ch*3
PCM (PPCM) 2ch*3
2ch*4
Multi-channel/Stereo
PCM (PPCM) 2ch
PCM (PPCM) 2ch
2ch
Multi-channel/Stereo
PCM 2ch
PCM 2ch
Multi
Stereo
Multi-channel/Stereo
2ch
Multi-channel/Stereo
Multi
DTS
2ch
Multi-channel/Stereo
Multi/2ch
Multi-channel/Stereo
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM multi*2
Multi-channel
Stereo
Off
PCM multi*2
Multi-channel
2ch
Off
multi*2
MPEG
PCM 2ch
PCM 2ch
–
–
–
*1: If the connected HDMI component does not support bitstream signals (Dolby Digital, DTS, and MPEG), the audio
output is automatically changed from bitstream signals to PCM signals.
*2: If the HDMI component does not support multi-channel audio signals, the audio output is automatically changed
from PCM multi-channel signals to PCM stereo signals and 48 kHz/16 bits signals or less.
*3: If the audio source is prohibited from downmixing, the front L/R channel audio and 48 kHz/16-bit signals or less are
output instead of downmixed stereo.
*4: If the connected component does not support more than 48 kHz, the audio output is automatically changed to 48 kHz/
16-bit signals or less.
Notes
• You need to set HDMI Audio (see page 37).
• SA-CD signals cannot be output using HDMI. Make an analog connection to listen to SA-CD (see page 10).
13 En
01EN_DVD-S1800_U.book Page 14 Thursday, July 19, 2007 1:28 PM
CONNECTIONS
Connecting the power cable
After all other connections are complete, plug the supplied
power cable into MAINS of this unit and then plug the
power cable to an AC outlet.
To an AC
outlet
MAINS
14 En
01EN_DVD-S1800_U.book Page 15 Thursday, July 19, 2007 1:28 PM
GETTING STARTED
English
GETTING STARTED
y
If the settings you have made are inappropriate, you can always reset all options and your personal settings to the initial factory settings.
For details, see “Resetting the system” on page 30.
Step 1: Inserting batteries into
the remote control
Using the remote control
Use the remote control within 6 m (20 ft approx.) of this
unit and point it toward the remote control sensor.
3
2
1
within 6m
(20 ft approx.)
1 Press the
part and slide the battery
compartment cover off.
2 Insert the two supplied batteries (AAA, R03,
UM-4), following the indications (+/–) on the
inside of the compartment.
3 Slide the cover back until it snaps into place.
Notes
• Insert batteries correctly according to the polarity markings
(+/–). The batteries inserted in the opposite direction may leak.
• Replace the exhausted batteries immediately with new ones to
prevent a leakage.
• Remove the batteries from the compartment if the remote
control is not used for more than a month.
• If the batteries have leaked, dispose of them immediately.
Avoid touching the leaked material or letting it come into
contact with clothing, etc. Clean the battery compartment
thoroughly before installing new batteries.
• Do not use old batteries together with new ones.
• Do not use different types of batteries (such as alkaline and
manganese batteries) together. Read the packaging carefully as
these different types of batteries may have the same shape and
color.
• Dispose of the batteries correctly in accordance with your local
regulations.
Notes
• Do not spill water or other liquids on the remote control.
• Do not drop the remote control.
• Do not leave or store the remote control in the following types
of conditions:
– places of high humidity, such as near a bath
– places of high temperature, such as near a heater or stove
– places of extremely low temperature
– dusty places
Step 2: Turning on the power
1 Make sure that the power cable is connected to
an AC outlet.
2 Turn on your TV and AV receiver.
3 Select the appropriate input source of the AV
receiver connected to this unit. Refer to the
manual supplied with your AV receiver for
details.
4 Press STANDBY/ON on the front panel or
POWER ( l ) on the remote control to turn on
this unit.
➜ The front panel display lights up.
5 Set the TV to the correct Video IN channel (e.g.,
EXT1/2, AV1/2, AUDIO/VIDEO, etc. Refer to
the manual supplied with your TV for details).
➜ The default screen appears on the TV.
15 En
01EN_DVD-S1800_U.book Page 16 Thursday, July 19, 2007 1:28 PM
GETTING STARTED
3 Press
Step 3: Setting a TV type
repeatedly to highlight [TV
/
Type].
This unit is compatible with both NTSC and PAL video
formats. Select the color system that matches your TV.
VIDEO
y
TV Display
1/1
16:9
TV Type
• Press RETURN to display the previous menu.
• Press SETUP to exit from the setup menu.
1 Press SETUP.
NTSC
Wide Screen Format
Off
Black Level*1
Off
Closed Caption*1
➜ The setup menu appears.
Off
Still Mode
Field
Component
SETUP
GENERAL
AUDIO
1/2
DVD-Audio mode
Move :
VIDEO
4 Press
Parental Rating
Parental Password
DISC
Auto Power Off
Sleep Timer
Move :
Return
Select : Enter
2 Press
/
repeatedly to select [VIDEO],
and then press ENTER.
➜ [VIDEO] menu appears.
VIDEO
1/1
16:9
TV Display
NTSC
TV Type
Wide Screen Format
Off
Black Level*1
Off
Closed Caption*1
Off
Field
Still Mode
Interlaced
Component
RGB
Scart Video Out*2
Move :
Return
Select : Enter
*1: [Black Level] and [Closed Caption] are only for U.S.A. and
Canada models.
*2: [Scart Video Out] is only for U.K., Europe, and Russia
models.
16 En
Return
Select : Enter
/
to select one of the options below.
PAL
Select this if the connected TV is a PAL system TV. It will
change video signals of NTSC discs and output them in
PAL format.
Screen Saver
HDMI
RGB
SA-CD mode
OSD Language
SPEAKER
Interlaced
Scart Video Out*2
NTSC
Select this if the connected TV is an NTSC system TV. It
will change video signals of PAL discs and output them in
NTSC format.
MULTI
Select this if the connected TV is compatible with both
NTSC and PAL formats (such as a multi-system TV). The
output format will be in accordance with the video signals
of the disc.
Notes
• Before changing the current TV Standard setting, ensure that
your TV supports the selected TV type system.
• If you play an NTSC-formatted disc with the [PAL] setting or a
PAL-formatted disc with the [NTSC] setting, the video quality
may deteriorate.
• When [TV Type] is set to [MULTI], this unit may change the
HDMI resolution unwantedly. In this case, try the [NTSC] or
[PAL] setting.
01EN_DVD-S1800_U.book Page 17 Thursday, July 19, 2007 1:28 PM
GETTING STARTED
Setting the audio, subtitle and disc
menu languages
You can select your own preferred language settings. This
unit will automatically switch to your preferred language
for you whenever you load a disc. If the language selected
is not available on the disc, the default language of the disc
will be used instead. The OSD (On-Screen Display)
language in the system menu will remain once selected.
1 Press SETUP.
➜ The setup menu appears.
2 Press
/
repeatedly to highlight [DISC],
and then press ENTER.
➜ [DISC] menu appears.
y
DISC
• Press RETURN to display the previous menu.
• Press SETUP to exit from the setup menu.
AUDIO Language
1/1
English
Subtitle Language
Off
DVD Menu Language
Setting the OSD (On-Screen Display)
language
English
Angle Mark
On
PBC
Off
Time Interval
3 sec
1 Press SETUP.
➜ The setup menu appears.
2 Press
/
repeatedly to highlight
[GENERAL], and then press ENTER.
Move :
➜ [GENERAL] menu appears.
1/2
DVD-Audio
SA-CD mode
SA-CD
OSD Language
English
Parental Rating
Level 8
----
Parental Password
On
Screen Saver
Mode 1
Auto Power Off
Off
Sleep Timer
Move :
Return
Select : Enter
3 Press
GENERAL
DVD-Audio mode
Return
Select : Enter
/
repeatedly to highlight [AUDIO
Language] or [Subtitle Language] or [DVD
Menu Language].
4 Press
/
to select a language.
■ To select the language not in the list:
1 Select [Others] under [AUDIO Language] or
[Subtitle Language] or [DVD Menu Language].
2 Press ENTER.
3 Use the numeric buttons (0-9) to enter the
4-digit language code (see “LANGUAGE CODE
LIST” on page 39).
3 Press
/
repeatedly to highlight [OSD
Language].
4 Press
/
4 Press ENTER.
to select a language.
17 En
English
Step 4: Setting a language
preference
01EN_DVD-S1800_U.book Page 18 Thursday, July 19, 2007 1:28 PM
DISC OPERATION
DISC OPERATION
3 Press
Notes
• Unless otherwise specified, all operations described here are
carried out using the supplied remote control.
• If the inhibition icon ( or “Prohibit”) appears on the TV
screen when you press a button, the function for that button is
not available on the current disc or at the current time.
• Depending on the DVD or Video CD disc, some operations
may operate differently or be restricted.
• Do not push on the disc tray or put any objects other than discs
on the disc tray. Doing so may cause the disc unit to
malfunction.
again to close the disc tray.
➜ After recognizing the disc, this unit starts to play
back automatically.
• If you press PLAY ( 3 ) when the disc tray is
opened, the disc tray closes and playback starts
automatically.
• Depending on the disc, the disc reading time may
exceed 30 seconds due to the complexity of the
directory/file configuration.
4 To stop playback, press STOP ( 7 ).
➜ “RESUME” appears in the front panel display.
5 To resume playback, press PLAY ( 3 ).
Basic operation
GROUP
➜ The disc is played back from the last stopping
point.
y
MULTI 2CH
PAGE
As long as you do not eject a disc, you can resume playback even
if you turn off this unit.
PROG
RANDOM
Numeric
buttons (0-9)
6 To cancel resume mode, press STOP ( 7 )
twice.
REPEAT
A B
CLEAR
SLOW SEARCH
STOP
STOP (
)
PAUSE (
)
SKIP (
/
Notes
ENTER
SETUP
PAUSE
PLAY
SLOW/SEARCH
( / )
PLAY (
)
SKIP
)
TOP MENU
• It may not be possible to play certain MP3/JPEG/DivX® discs
due to the configuration and characteristics of the disc or the
recording conditions.
• When you play a down mix prohibited disc, “NO DOWN
MIX” lights in the front panel display.
ON SCREEN
Pausing playback
1 Press
on the front panel to open the disc tray.
2 Place a disc in the disc tray with the printed side
up.
1 During playback, press PAUSE ( 8 ).
➜ Playback is paused and the sound is muted.
2 Press PAUSE ( 8 ) again to select the next
picture frame (frame-by-frame playback).
3 To resume normal playback, press PLAY ( 3 ).
Selecting a track/chapter
Press SKIP (l22 / 33l) or use the numeric
buttons (0-9) and ENTER to select a track/
chapter number.
•
•
18 En
You can move to the top of the currently playing
track/chapter by pressing SKIP (l22 ) once, and
move to the previous track/chapter by pressing
SKIP (l22 ) twice.
During repeat playback of a track/chapter, press
SKIP (l22 / 33l) to replay the same track/
chapter.
01EN_DVD-S1800_U.book Page 19 Thursday, July 19, 2007 1:28 PM
DISC OPERATION
MP3, WMA, JPEG, DivX®
•
For slow search, press PAUSE ( 8 ) to
pause playback before pressing
SLOW / SEARCH (22 / 33).
2 While searching, press
SLOW / SEARCH (22 / 33) repeatedly
to select the desired speed.
3 To resume normal playback, press PLAY ( 3 ).
Notes
• For WMA, DTS-CD and JPEG, the search function (backward,
forward and slow playback) is not available.
• For MP3, slow playback is not available.
• For VCD, SVCD and DivX®, the slow backward function is
not available.
Repeat playback
You can repeat single chapter/track, single title/group or
entire disc. Also, you can set two points (start and end
points) to repeat the specified section.
Folder
Track
1 Press SLOW / SEARCH (22 / 33).
English
Searching backward/forward
OFF
All
Chapter: repeats the current chapter
Title: repeats the current title
Track: repeats the current track
Group: repeats the current group
Folder: repeats the current folder
All*: repeats the entire disc
OFF: exits from repeat mode
*: This feature may not be available with some discs.
Note
For VCD and SVCD, repeat playback is not available when the
PBC mode is selected.
Repeating a section
(except DVD-Audio/MP3/WMA/JPEG)
1 During playback, press A-B at the desired
starting point.
2 Press A-B again at the desired end point.
➜ The selected section repeats continuously.
REPEAT
REPEAT
A B
CLEAR
SETUP
ENTER
3 To exit from the sequence, press A-B.
A-B
SLOW SEARCH
Random playback
(except DVD/SA-CD)
Repeating playback
Press REPEAT to select the repeat play mode.
You can play tracks in random order.
➜ Each time you press the button, the display on the
TV screen changes as follows:
RANDOM
DVD-Video
REPEAT
PROG
RANDOM
Title
Chapter
1 During playback, press RANDOM.
OFF
➜ “RANDOM” appears in the front panel display
and all tracks are played in random order.
DVD-Audio
Group
Track
2 To resume normal playback, press RANDOM
again.
OFF
CD, SA-CD, VCD, SVCD
All
Track
OFF
19 En
01EN_DVD-S1800_U.book Page 20 Thursday, July 19, 2007 1:28 PM
DISC OPERATION
Program playback (CD)
Note
You can customize the playback order for tracks stored in
the disc. This unit supports a maximum of 20 programmed
tracks.
GROUP
MULTI 2CH
PAGE
PROG
PROG
RANDOM
Numeric
buttons (0-9)
A B
CLEAR
ENTER
SETUP
Disc menu operation
(DVD/VCD/SVCD)
Many DVD, Video CD (version 2.0 only), and SVCD
discs include original navigational menus called “DVD
menus” and “Video CD playback control menus”. These
menus provide a convenient way to operate the disc.
REPEAT
CLEAR
Once you take out the disc from the disc tray or turn off this unit,
the stored program play content is cleared.
SLOW SEARCH
GROUP
STOP
STOP (
PAUSE
MULTI 2CH
PAGE
PLAY
)
PROG
Numeric
buttons (0-9)
SKIP
TOP MENU
RANDOM
REPEAT
ON SCREEN
A B
/
CLEAR
/ /
ENTER
ENTER
ENTER
SETUP
MENU
ENTER
SLOW SEARCH
RETURN
STOP
RETURN
PLAY
PAUSE
SKIP
1 Press STOP ( 7 ) to stop playback if necessary.
TOP MENU
SKIP (
2 Press PROG.
➜ The program setup menu appears on the TV
screen.
3 Use the numeric buttons (0-9) to enter a track
/
)
ON SCREEN
/ /
ENTER
ENTER
MENU
/
RETURN
MENU
RETURN
number you want to store as a program play.
4 Press
to move the cursor to the next field.
5 Repeat step 3-4 until you store all desired tracks.
Using the DVD menu
6 Use
1 Press MENU.
■ To clear the selected track number
2 Use
/
/ / to select [Play Program]
and then, press ENTER to start program
playback.
Press CLEAR.
20 En
/
/ / or the numeric buttons
(0-9) to select a playback feature or item.
3 Press ENTER to start playback.
■ To clear the list
Use
/
/ /
then press ENTER.
➜ The DVD menu appears on the TV screen.
• Depending on the disc, the DVD menu may appear
once you load the disc.
to select [Clear All], and
■ To exit from the menu
Press MENU.
01EN_DVD-S1800_U.book Page 21 Thursday, July 19, 2007 1:28 PM
DISC OPERATION
Using the OSD menu
(DVD/VCD/SVCD/CD)
1 Press MENU to turn on the PBC function.
English
Using the Video CD playback control
(PBC) menu (VCD/SVCD)
During playback, press ON SCREEN.
➜ The disc menu appears on the TV screen.
• Depending on the disc, the disc menu may appear
once you load the disc.
➜ A list of available disc information appears on the
TV screen.
DVD-Video
2 Use SKIP (l22 / 33l) or the numeric buttons
(0-9) to select a playback option.
1
2
DVD VIDEO
3 During playback, press RETURN to return to
Title
the menu screen.
■ To skip the index menu and play back a
disc directly from the beginning
1/1
Subtitle
4
00 : 00 : 10
02 : 15 : 30
1/7
Time
5
00 : 00 : 10
MPEG 5.1 Ch
1/1
Bitrate
Press MENU to turn off the PBC function.
Chapter
1/1
Audio
3
Angle
1/1
3.072 Mbps
0
8
9
7
6
DVD-Audio
y
You can also use the setup menu to turn on or off the playback
control (PBC) function (see “Selecting the PBC (playback
control) function” on page 38).
1
2
DVD AUDIO
Group 1 / 1
On-screen display (OSD) menu
(DVD/VCD/SVCD/SA-CD)
Audio
Subtitle
The OSD menu shows disc playback information (e.g., the
title or chapter number, elapsed playing time or audio/
subtitle language). A number of operations are possible
without interrupting disc playback.
GROUP
MULTI 2CH
PAGE
0
Track
1/1
3
4
00 : 00 : 10
02 : 15 : 30
1/8
00 : 00 : 10
MLP 5.1 Ch
1/1
Angle
8
Time
96 k / 24 bit
1/1
7
5
Page
6
1/1
q
VCD/SVCD/CD
2
w
VCD
Track
PROG
00 : 00 : 10
1/7
RANDOM
Numeric
buttons (0-9)
Time
REPEAT
Track Elapsed
A B
CLEAR
ENTER
SETUP
e
SLOW SEARCH
STOP
PAUSE
PLAY
SKIP
TOP MENU
ON SCREEN
ON SCREEN
/
ENTER
MENU
RETURN
/
/
1: Current title or group number/Total number of titles or groups
2: Current chapter or track number/Total number of chapters or tracks
3: Elapsed time
4: Time remaining
5: Elapsed time (You can input numbers for time search.)
6: Audio information
7: Current angle number/Total number of available angles
8: Current subtitle number/Total number of available subtitle languages
9: Data transmission speeds
0: Current audio number/Total number of available audio languages
q: Current page number/Total number of pages
w: Time (You can select a category of time.)
e: Category of time being displayed on w
21 En
01EN_DVD-S1800_U.book Page 22 Thursday, July 19, 2007 1:28 PM
DISC OPERATION
■ To select a title (DVD-Video)/group
(DVD-Audio)
1 Press
/
/ / repeatedly to highlight
1, and then enter a title/group number using the
numeric buttons (0-9).
2 Press ENTER.
1 Press
/
/ / repeatedly to highlight
2, and then enter a chapter or track number
using the numeric buttons (0-9).
2 Press ENTER.
■ To search for a time
repeatedly to highlight
5, and then enter hours, minutes and seconds
from left to right using the numeric buttons
(0-9).
/
/
/
2 Press ENTER.
Note
When searching for a time, if you enter a time outside the total
time for the group/track currently being played back, the
inhibition icon ( ) is displayed.
■ To select an angle/subtitle/audio
1 Press
repeatedly to highlight
7, 8 or 0, and then enter a audio, subtitle or
angle number using the numeric buttons
(0-9).
/
/
/
2 Press ENTER.
Press ON SCREEN.
Displaying text information (SA-CD)
Some SA-CD discs contain text information (e.g., track
name, album name, artist name etc.). If SA-CD text is
available on the disc, the track name is automatically
displayed on the TV screen once you load the disc.
■ To display the album/artist name
During playback, press ON SCREEN.
Picture Setting menu
(DVD/VCD/SVCD)
This unit comes with 10 sets of picture color settings that
you can define yourself.
Adjusting picture settings
1 Press ON SCREEN twice during playback.
➜ The Picture Setting menu appears on the TV
screen.
2 Press
/
parameter and
parameter.
to highlight the desired
/ to adjust the selected
Picture Setting
Note
You cannot change the [Angle]/[Subtitle]/[Audio] setting if the
function is not available on the disc you are playing.
■ To select a page (DVD-Audio)
1 Press
Press
/
/ / repeatedly to highlight
w, and then press ENTER to toggle between the
category of time.
■ To exit from the OSD menu
■ To select a chapter (DVD-Video)/track
(VCD/SVCD/DVD-Audio)
1 Press
■ To select a category of time
(VCD/SVCD/CD)
repeatedly to highlight
q, and then enter a page number using the
numeric buttons (0-9).
/
2 Press ENTER.
/
/
01/09
Brightness
Move :
0
Adjust :
3 Press ON SCREEN to exit from the setup
menu.
➜ You can adjust the following parameters.
Brightness
Set this to adjust the overall brightness of the image.
Contrast
Set this to adjust the bright areas (white level) in the
image.
Hue
Set this to adjust the hue or phase of the image.
22 En
01EN_DVD-S1800_U.book Page 23 Thursday, July 19, 2007 1:28 PM
DISC OPERATION
Sharpness High
Set this to adjust the sharpness of the image for the high
frequencies.
DNR
Set this to reduce video noise.
Zooming pictures
(DVD-Video/VCD/SVCD/DivX®/
JPEG)
You can enlarge the picture on the TV screen and to pan
through the enlarged picture.
TOP MENU
Gamma
Set this to adjust the intensity of the picture non-linearly.
ON SCREEN
/
ENTER
MENU
/
/
RETURN
Chroma level
Set this to adjust the density of the color.
Chroma delay
Set this to adjust the advance delay of the chroma signal
for a perfectly clear picture.
True Life
Set this to adjust the intensity of the picture details. A
positive value enables you to reproduce the minute signals
of video sources. This function is only available for
progressive scan (using the component video jacks) and
HDMI output.
Availability of picture settings varies according to the
connection and settings.
SUBTITLE AUDIO ANGLE ZOOM
ZOOM
1 During playback, press ZOOM repeatedly to
display the picture at different scales (ZOOM
150%, 200%, 300%, or 400%).
2 Press
/
/
/
to pan through the
enlarged picture.
3 Press ZOOM repeatedly to return to the original
size.
HDMI
Progressive
(Component)
Interlaced
(Component)
Brightness
0 to +6
0 to +6
0 to +6
Contrast
–6 to +6
–6 to +6
–6 to +6
Hue
–6 to +6
–6 to +6
–6 to +6
(S-video and
CVBS only)
Sharpness
Mid
Not
available
–6 to +6
–6 to +6
Sharpness
High
Not
available
–6 to +6
–6 to +6
DNR
0 to +6
0 to +6
0 to +6
Gamma
Not
available
–6 to +6
–6 to +6
Note
Chroma
level
–6 to +6
–6 to +6
–6 to +6
Viewing angles available for each disc may vary. Refer to the
operating instructions in the DVD menu or on its jacket.
Chroma
Delay
Not
available
–2 to +2
–2 to +2
True Life
0 to +6
0 to +6
Not available
Viewing angles (DVD-Video)
If the disc contains sequences recorded from different
camera angles, you can view the picture from a number of
different angles.
SUBTITLE AUDIO ANGLE ZOOM
ANGLE
Press ANGLE repeatedly to select the desired
angle.
Note
All picture settings are not available for CVBS (composite video)
and S-video ouput.
23 En
English
Sharpness Mid
Set this to adjust the sharpness of the image for the
intermediate frequencies.
01EN_DVD-S1800_U.book Page 24 Thursday, July 19, 2007 1:28 PM
DISC OPERATION
Audio and Subtitle languages
(DVD-Video/VCD)
If the disc contains multi-language options, you can select
audio/subtitle languages.
Note
Languages available for each disc may vary. Refer to the
operating instructions in the disc menu or on its jacket.
y
You can set default audio/subtitle languages in the setup menu
(see “Setting the audio, subtitle and disc menu languages” on
page 17).
SUBTITLE AUDIO ANGLE ZOOM
DivX® external subtitle files
The font sets listed below are available for DivX® external
subtitle files. To watch DivX® discs with the desired font
set, set the default subtitle language setting in the setup
menu to the desired language (see “Setting the audio,
subtitle and disc menu languages” on page 17).
This unit supports the following languages:
Albanian, Breton, Bulgarian, Byelorussian, Catalan,
Croatian, Czech, Danish, Dutch, English, Faroese,
Finnish, French, German, Hungarian, Icelandic, Irish,
Italian, Kurdish (Latin), Macedonian, Greek, Hebrew,
Moldavian, Norwegian, Polish, Portuguese, Romanian,
Russian, Serbian, Slovak, Slovenian, Spanish, Swedish,
Turkish, Ukrainian
Notes
SUBTITLE
AUDIO
Selecting an audio language
Press AUDIO repeatedly to select an audio
language.
• Some discs cannot be played depending on disc characteristics
or recording conditions.
• Some external subtitle files may be displayed incorrectly or not
at all.
• For external subtitle files, the following filename extensions of
subtitle format are supported (note that these files are not
shown within the disc navigation menu):
.srt, .sub, .ssa, .smi, .ass, .txt, .psb, .sami
• The filename of the movie file has to be same as the filename
for the external subtitle file.
• For a movie file, only one external subtitle file can be loaded.
Note
For VCD, this function is only available when the [Analog
Output] setting is set to [Stereo] (see “Setting the analog output”
on page 31).
Selecting a subtitle language
(DVD-Video)
Press SUBTITLE repeatedly to select a subtitle
language.
Changing pages (DVD-Audio)
Many DVD-Audio discs include slide show and page turn
capabilities. You can display information pages for photo
galleries, artist biographies, lyrics, etc. if the function is
available for the disc.
Press PAGE (+/–) repeatedly to move to the
next/previous page.
DIMMER
GROUP
PAGE (+/ )
24 En
HDMI AUDIO DIRECT STANDBY
PAGE
MULTI 2CH
PROG
01EN_DVD-S1800_U.book Page 25 Thursday, July 19, 2007 1:28 PM
DISC OPERATION
You can select a track in a specific group for DVD-Audio
discs and a track/file in a folder for data disc.
GROUP
Bonus group playback
(DVD-Audio)
Some DVD-Audio discs contain bonus groups that require
a four-digit password to gain access. In this case, refer to
the disc jacket and other packaging for information.
GROUP
MULTI 2CH
PAGE
MULTI 2CH
PAGE
GROUP
GROUP
PROG
PROG
Numeric
buttons (0-9)
RANDOM
Numeric
buttons (0-9)
RANDOM
REPEAT
REPEAT
A B
A B
CLEAR
CLEAR
ENTER
SETUP
ENTER
SLOW SEARCH
STOP
PAUSE
ENTER
SETUP
STOP
PLAY
PAUSE
PLAY
SKIP
TOP MENU
ON SCREEN
/
ENTER
ENTER
MENU
ENTER
SLOW SEARCH
SKIP
TOP MENU
English
Group/File selection (DVD-Audio/
DivX®/MP3/WMA/Kodak picture
CD)
ON SCREEN
ON SCREEN
/
ENTER
ENTER
MENU
RETURN
RETURN
1 Press GROUP.
➜ A group icon appears on the TV screen.
Selecting a group (DVD-Audio)
1 Press GROUP.
DVD AUDIO
➜ A group icon appears on the TV screen.
Group
DVD AUDIO
Group
Move :
Move :
01 / 08
/
or the numeric buttons (0-9)
to select a group number.
3 Press ENTER.
Select : Enter
2 Use
/
or the numeric buttons (0-9)
to select a bonus group number, and then press
ENTER.
Select : Enter
2 Use
01 / 08
3 Enter a four-digit password using the numeric
buttons (0-9), and then press ENTER.
4 Press
/
to select a track, and then press
ENTER.
Selecting a file in a folder
(DivX®/MP3/WMA/Kodak picture CD)
1 Press
/
2 Press
/
to select a folder, and then press
ENTER to open the folder.
to select a file, and then press
ENTER.
➜ Playback starts from the selected file.
• If you use the numeric buttons (0-9) to select a
file, playback starts from the selected file
automatically.
Changing the playback area and
layer (SA-CD)
There are three types of SA-CD discs: single-layer, duallayer and hybrid. Each type may contain up to two areas of
recorded information: a High Quality Stereo area and a
High Quality Multi-channel area. You can switch between
the SA-CD multi-channel and SA-CD stereo areas.
y
You can also change the analog output setting using the setup
menu (see “Setting the analog output” on page 31).
25 En
01EN_DVD-S1800_U.book Page 26 Thursday, July 19, 2007 1:28 PM
DISC OPERATION
GROUP
MULTI 2CH
PAGE
Media Player
MULTI / 2CH
Time
00 : 00 : 10
PROG
ROOT
RANDOM
SCRNE
JPEG
REPEAT
A B
CLEAR
ENTER
SETUP
SLOW SEARCH
STOP
STOP (
..
0
JPG A_0510
JPG B_0618
JPG B_0630
JPG C_0731
1
JPG C_0729
5
2
3
4
PLAY
PAUSE
)
Move :
Select : Enter
2 Press
/
to select a folder, and then press
ENTER to open the folder.
1 Press STOP ( 7 ) to stop playback.
2 Press MULTI / 2CH.
•
➜ MULTI indicator lights up when the multi-channel
area is selected.
To move to the upper folder, select the folder icon
with two dots when disc playback is stopped.
3 Press
/
to select a file, and then press
ENTER.
Multimedia file playback
(MP3/WMA/DivX®/JPEG)
➜ Playback starts from the selected file.
• If you use the numeric buttons (0-9) to select a
file, playback starts from the selected file
automatically.
You can play MP3, WMA, DivX® and JPEG files on a
personally recorded CD-R/RW disc or commercial CD.
Notes
Displaying the thumbnail screen (JPEG)
• Some files cannot be played correctly depending on disc
characteristics or recording conditions.
• This unit supports JPEG files of 2848 x 2136 pixels in size.
However, some files may not be displayed correctly depending
on the aspect ratio of the image.
1 Press MENU during playback.
➜ The thumbnail pictures appear on the TV screen.
y
You can set the duration for each image of a slide show (see
“Setting the duration for a slide show” on page 38).
PROG
Numeric
buttons (0-9)
RANDOM
REPEAT
A B
CLEAR
SETUP
SLOW SEARCH
STOP
STOP (
2 Press SKIP (l22 / 33l) to display the other
ENTER
pictures on the previous/next page.
PLAY
PAUSE
3 Press
)
SKIP
TOP MENU
SKIP (
/
)
4 Press STOP ( 7 ) to return to the data disc
ON SCREEN
/ /
ENTER
ENTER
MENU
/
menu.
RETURN
MENU
1 Load a disc in the disc tray.
➜ Playback starts automatically.
➜ For MP3 and WMA, the data disc menu appears
on the TV screen.
➜ For DivX® and JPEG, press STOP ( 7 ) during
playback to display the data disc menu.
26 En
/
/ / to highlight one of the
pictures, and then press ENTER to start
playback.
Rotating pictures (JPEG)
During playback, press
/
/
rotate the picture on the TV screen.
/
to
: rotates the picture counter-clockwise by 90
degrees
: rotates the picture clockwise by 90 degrees
,
: rotates the picture by 180 degrees
01EN_DVD-S1800_U.book Page 27 Thursday, July 19, 2007 1:28 PM
SETUP MENU
English
SETUP MENU
Menu overview
y
• The initial setting for each parameter is indicated in bold.
• If the settings you have made are inappropriate, you can always reset all options and your personal settings to the initial factory
settings. For details, see “Resetting the system” on page 30.
Main Menu
GENERAL
AUDIO
SPEAKER
Menu item
DVD-Audio, DVD-Video
SA-CD mode
SA-CD, CD
OSD Language
English, Français, Español,
_ _ _ _ (Enter your password)
Level 1 to Level 8
Parental Password
_ _ _ _ (Enter your password)
New Password, Confirm Password
Screen Saver
On, Off
Auto Power Off
Mode 1, Mode 2, Off
Sleep Timer
Off, 30min, 60min, 90min,120min,150min
Factory Default
_ _ _ _ (Enter your password)
Yes, No
DivX Registration
(DivX registration code is displayed)
Enter
Analog Output
Stereo, Multi-Channel
Digital Out
All, PCM, Off
LPCM Output
48KHz, 96KHz
Night Listening Mode
On, Off
Size
Front L/R
Large, Small
Center, Surround L/R
Large, Small, Off
Level
SA-CD
HDMI
DISC
Setting item/Parameter
Parental Rating
Distance
VIDEO
Setting Item/Submenu
DVD-Audio mode
TV Display
Subwoofer
On, Off
Initialize
On, Off
Unit
Feet, Meter
Front L/R, Center, Surround L/R
1ft to 40ft (0.3m to 12.0m)
Default setting: 10ft (3.0m)
Initialize
On, Off
Front L, Center, Front R, Surround L, Surround R,
Subwoofer
0dB to –12dB
Test Tone
Off, Manual, Auto
Initialize
On, Off
SA-CD Config
Config 1, Config 2, Config 3
CUT-OFF Frequency
60, 80, 100, 120
16:9, 4:3 Pan Scan, 4:3 Letter Box
TV Type
MULTI, NTSC, PAL
Wide Screen Format
NL Stretch, Pillar Box, Off
Black Level (U.S.A. and
Canada models only)
On, Off
Closed Caption (U.S.A.
and Canada models only)
On, Off
Still Mode
Frame, Field
Component
Progressive, Interlaced
Scart Video Out (U.K.,
Europe, and Russia
models only)
CVBS, RGB
HDMI Video
480p/576p, 720p, 1080i, 1080p, Auto
DVI Output Range
Standard, Enhanced
HDMI Audio
Auto, PCM, Off
AUDIO Language
Off ([Subtitle Language] only), English, French,
Spanish, Japanese, German, Italian, Russian,
Others
Subtitle Language
DVD Menu Language
Angle Mark
On, Off
PBC
On, Off
Time Interval
2 sec to 10 sec, Default setting: 3 sec
27 En
01EN_DVD-S1800_U.book Page 28 Thursday, July 19, 2007 1:28 PM
SETUP MENU
2 Press
/
to select the desired main menu,
and then press ENTER.
Setup menu operation
Setup is carried out on the TV screen, enabling you to
customize this unit to suit your own particular
requirements. Follow the procedures below to start the
setup menu operations.
➜ Menu items and setting items appear.
SPEAKER
1/1
Size
Distance
Level
REPEAT
SA-CD
A B
CLEAR
ENTER
SETUP
SLOW SEARCH
SETUP
STOP
PLAY
PAUSE
Move :
Return
Select : Enter
SKIP
TOP MENU
/
/ /
ENTER
3 Press
/
to highlight the desired menu item.
➜ If the selected menu item has submenus, only a
right arrow is displayed on the side of the setting
item. In this case, press , and then repeat step 3.
ON SCREEN
ENTER
MENU
RETURN
RETURN
SPEAKER
1/1
SA-CD Config
Config 1
CUT-OFF Frequency
100
SUBTITLE AUDIO ANGLE ZOOM
y
Move :
• Press RETURN to display the previous menu.
• Press SETUP to exit from the setup menu.
• Refer to the following pages for details of the menu that
requires a particular operation.
1 Press SETUP.
➜ Main menus and menu items appear on your TV.
SETUP
GENERAL
AUDIO
1/2
Return
Select : Enter
➜ If the selected menu item has only setting items,
left and right arrows appear on both sides of the
setting item.
AUDIO
1/1
Analog Output
Stereo
Digital Out
DVD-Audio mode
LPCM Output
SA-CD mode
Night Listening Mode
PCM
96KHz
Off
OSD Language
SPEAKER
VIDEO
Parental Rating
Parental Password
Screen Saver
HDMI
DISC
Move :
28 En
Auto Power Off
Move :
Sleep Timer
Return
Select : Enter
4 Press
Return
Select : Enter
/ to toggle the setting items or to
adjust the parameter.
01EN_DVD-S1800_U.book Page 29 Thursday, July 19, 2007 1:28 PM
SETUP MENU
Notes
SETUP
GENERAL
AUDIO
1/2
DVD-Audio mode
SA-CD mode
OSD Language
SPEAKER
VIDEO
Parental Rating
Setting the OSD language
Parental Password
Screen Saver
HDMI
DISC
Move :
This menu contains various options for the on-screen
display (OSD) language. For details, see “Setting the OSD
(On-Screen Display) language” on page 17.
Auto Power Off
Sleep Timer
Return
Select : Enter
Selecting DVD-Audio mode
Some DVD-Audio discs contain the DVD-Video content
in addition to the DVD-Audio content. You can select
DVD-Audio or DVD-Video mode.
•
Select [DVD-Audio mode] in [GENERAL] menu.
DVD-Audio
Select this to play back both DVD-Audio and DVD-Video
contents. Only the DVD-Audio content may be played
back depending on the disc.
DVD-Video
Select this to play back only the DVD-Video content.
Notes
• This setting is only available when no disc is loaded in the disc
tray.
• Selected mode becomes effective after you close the setup
menu.
y
• When a DVD-Audio disc is played back, the DVD AUDIO
indicator lights up.
• When you select [DVD-Video], the DVD AUDIO indicator
goes out.
Selecting SA-CD mode
Some SA-CD discs contain both SA-CD layer and the
standard CD layer. You can select SA-CD or CD mode.
•
Select [SA-CD mode] in [GENERAL] menu.
SA-CD
Select this to play back SA-CD layer.
CD
Select this to play back CD layer.
• This setting is only available when no disc is loaded in the disc
tray.
• Selected mode becomes effective after you close the setup
menu.
• When you select [CD], this unit does not play back SA-CD
discs which do not have CD layer.
Restricting playback with parental
control
Some DVD discs have a parental level assigned to the
complete disc or to certain scenes on the disc. This feature
lets you set a playback limitation level.
The rating levels are from 1 to 8 and are country
dependent. You can prohibit playback of certain discs that
are not suitable for your children or play certain discs in
alternative scenes.
1 Select [Parental Rating] in [GENERAL] menu.
2 Enter your four-digit password using the
numeric buttons (0-9). (For details about the
password, see “Changing the parental password”
below.)
➜ If the password is correct, [Parental Rating] is
enabled to select.
3 Press
•
/ to select the rating level.
To disable parental controls and have all discs play,
select [Level 8].
Notes
• VCD, SVCD, CD and SA-CD have no level indication, so the
parental control function has no effect with these types of
discs.
• Some DVD discs are not encoded with a rating though the
movie rating may be printed on the disc cover. The rating level
feature does not work for such discs.
Changing the parental password
You can change the password for parental control. Enter
your four-digit password when prompted on the screen.
The default password is “2580”.
1 Select [Parental Password] in [GENERAL]
menu.
29 En
English
General setup menu
01EN_DVD-S1800_U.book Page 30 Thursday, July 19, 2007 1:28 PM
SETUP MENU
2 Enter your old four-digit password using the
numeric buttons (0-9).
• When doing this for the first time, enter “2580”.
➜ If the password is correct, the submenu appears.
3 Enter the new four-digit password using the
Resetting the system
You can reset all options and your personal settings to the
initial factory settings, except [Parental Rating] and
[Parental Password].
numeric buttons (0-9).
1 Select [Factory Default] in [GENERAL] menu.
➜ [Confirm Password] is highlighted.
2 Enter your four-digit password using the
numeric buttons (0-9). (For details about the
password, see “Changing the parental password”
on page 29.)
4 Enter the new four-digit password again.
➜ The previous menu screen appears and the new
four-digit password is now valid.
➜ The confirmation screen appears.
Setting the screen saver
GENERAL
2/2
You can turn on or off the screen saver.
•
DivX Regis
Factory Default
On
Select this to turn on the screen saver when disc playback
is stopped for more than 15 minutes.
Press [Yes] to confirm
Yes
Off
Select this to disable the screen saver function.
Move :
Setting the auto power function
You can set the auto standby mode.
•
Mode 2
Select this to set this unit to the standby mode
automatically when disc playback is stopped for more
than 30 minutes.
Off
Select this to disable the auto power off function.
Setting the sleep timer
You can set this unit to the standby mode automatically
after a certain elapsed period.
•
Select [Sleep Timer] in [GENERAL] menu.
30min, 60min, 90min, 120min, 150min
Select one to set the sleep timer function.
Off
Select this to cancel the sleep timer function.
30 En
No
Return
Select : Enter
3 Press
/ to select [Yes] to reset the system,
and then press ENTER.
Select [Auto Power Off] in [GENERAL] menu.
Mode 1
Select this to set this unit to the standby mode
automatically when disc playback is stopped for more
than 30 minutes or disc playback is continued for more
than six hours without operation.
....
Factory Default
Select [Screen Saver] in [GENERAL] menu.
➜ All settings are reset to the initial factory settings.
Displaying the DivX® VOD registration
code
Yamaha provides you with the DivX® VOD (Video On
Demand) registration code that allows you to rent and
purchase videos using the DivX® VOD service.
For more information, visit at www.divx.com/vod.
1 Select [DivX Registration] in [GENERAL] menu.
2 Press .
➜ The registration code appears.
3 Press ENTER to return to the previous menu.
y
To purchase or rent the videos from DivX® VOD service at
www.divx.com/vod, use the registration code and download the
video onto a CD-R for playback on this unit.
Notes
• All videos downloaded from DivX® VOD can only be played
back on this unit.
• The time search function is not available during DivX® movie
playback.
01EN_DVD-S1800_U.book Page 31 Thursday, July 19, 2007 1:28 PM
SETUP MENU
Setting the LPCM output
Digital Out
Set the LPCM output if you have connected this unit to a
PCM-compatible receiver via a digital terminal, such as
the coaxial or optical terminals.
Discs are recorded at a certain sampling rate. The higher
the sampling rate, the better the sound quality.
LPCM Output
•
SETUP
GENERAL
AUDIO
SPEAKER
1/1
Analog Output
48KHz
Select this to play back discs recorded at the sampling rate
of 48 kHz. All 96 kHz PCM data streams (if available) are
converted to the sampling rate of 48 kHz.
VIDEO
HDMI
DISC
Move :
Return
Select : Enter
Setting the analog output
Set the analog output to match the playback capability of
this unit.
•
Select [LPCM Output] in [AUDIO] menu.
Night Listening Mode
Select [Analog Output] in [AUDIO] menu.
Stereo
Select this to change channel output to stereo, which only
delivers sound from the two front speakers.
96KHz
Select this to play back discs recorded at the sampling rate
of 96 kHz. If the 96 kHz disc is copy protected, the digital
output is automatically converted to a sampling rate of 48
kHz.
Setting the night listening mode
In this mode, high volume output is softened and low
volume output is brought upward to an audible level. It is
useful when you watch your favorite action movie without
disturbing others at night.
Multi-Channel
Select this when using a multi-channel audio/(video)
receiver with 6 channel inputs. In this mode, this unit
performs DTS decoding or Dolby Digital 5.1-channel
decoding when applicable.
•
Setting the digital output
Off
Select this when you want to enjoy the full dynamic range
of surround sound.
Set the digital output according to your optional audio
component connections.
•
Select [Digital Out] in [AUDIO] menu.
All
Select this if you have connected the digital audio output
jack to a multi-channel decoder/receiver.
Select [Night Listening Mode] in [AUDIO]
menu.
On
Select this to level out the volume. This feature is only
available for movies with Dolby Digital mode.
Note
This mode is only effective for analog output.
PCM
Select this only if your receiver is not capable of decoding
multi-channel audio signals.
Off
Select this to turn off the digital output.
31 En
English
Audio setup menu
01EN_DVD-S1800_U.book Page 32 Thursday, July 19, 2007 1:28 PM
SETUP MENU
Initialize
You can reset [Size] settings to the initial factory settings.
Speaker setup menu
1 Select [Initialize] under [Size] in [SPEAKER]
SETUP
GENERAL
AUDIO
2 Press .
Size
➜ The confirmation screen appears.
Distance
Level
SPEAKER
menu.
1/1
3 Select [Yes] to reset the setting, and then press
SA-CD
ENTER.
VIDEO
➜ [Size] settings are reset to the initial factory
settings.
HDMI
DISC
Move :
Return
Select : Enter
Setting speaker distances
You can set the sizes for individual speakers.
You can set the distances for individual speakers.
Placing all speakers except for the subwoofer at equal
distances from the listener is the most ideal way of the
speaker positioning in 5.1 channel system.
•
•
Setting speaker sizes
Select [Size] in [SPEAKER] menu.
Front L/R
Set the sizes for front L/R speakers.
Large
Select this if the connected speakers are large.
Small
Select this if the connected speakers are small.
Center, Surround L/R
Set the sizes for center/surround L/R speakers.
Large
Select this if the connected speakers are large.
Small
Select this if the connected speakers are small.
Off
Select this if no center/surround L/R speakers are
connected.
Subwoofer
Select on or off for the subwoofer.
On
Select this if a subwoofer is connected.
Off
Select this if no subwoofer is connected.
Select [Distance] in [SPEAKER] menu.
Unit
You can select the display unit of measurement.
Feet
Select this to input speaker distances in feet.
Meter
Select this to input speaker distances in meters.
Front L/R
Set the distance from your listening position to the front
speakers. We recommend to place the front left speaker
and right speaker at the same distance from the listening
position.
Center
Set the distance from your listening position to the center
speaker.
Surround L/R
Set the distance from your listening position to the
surround speakers. We recommend to place the surround
left speaker and right speaker at the same distance from
the listening position.
Control range: 1ft to 40ft (0.3m to 12.0m)
Control step: 1ft (0.3m)
Notes
Notes
• These settings are not available for SA-CD discs. See “Setting
the SA-CD configuration” on page 33 for the SA-CD setting.
• [Center], [Surround L/R] and [Subwoofer] settings are not
available when the [Analog Output] setting is set to [Stereo]
(see “Setting the analog output” on page 31).
• For the [Center] setting, you cannot specify the distance
beyond the [Front L/R] setting or below the [Front L/R] setting
minus 5ft (1.5m).
• For the [Surround L/R] setting, you cannot specify the distance
beyond the [Front L/R] setting or below the [Front L/R] setting
minus 15ft (4.5m).
32 En
01EN_DVD-S1800_U.book Page 33 Thursday, July 19, 2007 1:28 PM
SETUP MENU
Initialize
You can reset [Level] settings to the initial factory settings.
1 Select [Initialize] under [Level] in [SPEAKER]
1 Select [Initialize] under [Distance] in
[SPEAKER] menu.
menu.
2 Press .
2 Press .
➜ The confirmation screen appears.
➜ The confirmation screen appears.
3 Select [Yes] to reset the setting, and then press
3 Select [Yes] to reset the setting, and then press
ENTER.
➜ [Level] settings are reset to the initial factory
settings.
ENTER.
➜ [Distance] settings are reset to the initial factory
settings.
Setting the SA-CD configuration
Setting speaker levels
You can set the volume levels for individual speakers.
•
Select [Level] in [SPEAKER] menu.
Front L, Center, Front R, Surround L, Surround R,
Subwoofer
Set the volume levels for front L/R speakers, center
speaker, surround L/R speakers or subwoofer.
Control range: 0dB to –12dB
Control step: 1dB
Test Tone
A test tone can be output to help you judge the volume
level of each speaker.
1 Select [Test Tone] under [Level] in [SPEAKER]
menu.
2 Press
/
to select [Off], [Manual] or [Auto].
Off
Select this to output no test tone.
Manual
Select this to output the test tone manually.
Auto
Select this to output the test tone from each speaker
automatically.
You can select speaker sizes and on/off statuses for
SA-CD discs. You can also select a cut-off (cross-over)
frequency for all low-frequency signals. All frequencies
below the selected frequency are sent to the subwoofer.
•
Select [SA-CD] in [SPEAKER] menu.
SA-CD Config
Select speaker sizes and on/off statuses from the following
three settings.
Size or on/off
Speaker
Config 1
Config 2
Config 3
Front L/R
Large
Small
Large
Center
Large
Small
Small
Surround L/R
Large
Small
Small
Subwoofer
On
On
Off
CUT-OFF Frequency
Select a cut-off (cross-over) frequency for all lowfrequency signals. All frequencies below the selected
frequency are sent to the subwoofer.
Control range: 60, 80, 100, 120 (Hz)
3 For [Auto], press
/ to select [Yes], and then
press ENTER to output the test tone. For
[Manual], press
/
to select each speaker,
and then press ENTER to output the test tone.
Notes
• The test tone is not output from a center speaker, surround
speakers, and a subwoofer when the [Analog Output] setting is
set to [Stereo] (see “Setting the analog output” on page 31).
• These settings are only effective for analog output.
33 En
English
Initialize
You can reset [Distance] settings to the initial factory
settings.
01EN_DVD-S1800_U.book Page 34 Thursday, July 19, 2007 1:28 PM
SETUP MENU
When the aspect ratio of your TV is 4:3:
Video setup menu
Setting
SETUP
TV display
1/1
GENERAL
16:9
TV Display
Wide Screen Format
SPEAKER
*2
4:3 Pan
Scan
TV Type
AUDIO
VIDEO
Playback
disc
Black Level*1
4:3
Closed Caption*1
Still Mode
HDMI
DISC
Component
16:9
Scart Video Out*2
Move :
Return
4:3 Letter
Box
Select : Enter
*1: [Black Level] and [Closed Caption] are only for U.S.A. and
Canada models.
*2: [Scart Video Out] is only for U.K., Europa, and Russia
models.
Setting the TV display
Set the aspect ratio of this unit to match your TV. The
format you select must be available on the disc.
•
4:3
*1: The side of the picture may be stretched depending on the
TV. In this case, check the screen size and aspect ratio of
your TV.
*2: If the disc is not assigned to play back with panscan, it is
played with letterbox.
Setting the TV type
Select [TV Display] in [VIDEO] menu.
4:3 Pan Scan
Select this if the aspect ratio of your TV is 4:3. In this
setting, both sides of the picture to be trimmed or
formatted to fit your TV screen.
This menu contains the options for selecting the color
system that matches your TV. For details, see “Step 3:
Setting a TV type” on page 16.
4:3 Letter Box
Select this if the aspect ratio of your TV is 4:3. In this
setting, a wide picture with black bands on the upper and
lower portions of the TV screen are displayed.
Selecting the wide screen format
16:9
Select this if you have a widescreen TV.
•
■ The relationship between the setting of this
unit and the TV display
When the aspect ratio of your TV is 16:9 (widescreen):
Setting
Playback
disc
16:9
34 En
Select [Wide Screen Format] in [VIDEO] menu.
NL Stretch
Select this to display of 4:3 image on the 16:9 screen with
non-linear stretching. (The center position of the screen is
stretched less than the side.)
Pillar Box
Select this to display 4:3 image on the 16:9 screen without
stretching. Even when this unit is playing a disc recorded
in the 16:9 squeeze mode, the picture is displayed in the
center of the screen.
TV display
16:9
4:3
Set the aspect ratio of the projected images on the screen.
This function is only available for progressive scan and
HDMI output.
*1
Off
Select this to make no aspect ratio adjustment.
01EN_DVD-S1800_U.book Page 35 Thursday, July 19, 2007 1:28 PM
SETUP MENU
If you set the [TV Type] to [NTSC] (see “Step 3: Setting a
TV type” on page 16), set this setting shift to [On] to
improve the color contrast during playback.
•
Select [Black Level] in [VIDEO] menu.
On
Select this to enhance the black level.
Off
Select this for the standard black level setting.
Notes
• This function is only available for CVBS (composite video)
and S-video output.
• This setting has no effect if the [TV Type] is set to [PAL] or
[MULTI] (see “Step 3: Setting a TV type” on page 16).
Selecting the closed caption
(U.S.A. and Canada models only)
Closed captions are data hidden in the video signals of
specific discs, and are invisible without the use of a special
decoder. The difference between subtitles and captions is
that subtitles are intended for hearing persons and captions
are for the hearing impaired. Subtitles rarely show all of
the audio. For example, captions show sound effects (e.g.,
“phone ringing” and “footsteps”), while subtitles do not.
Before you select this setting, please ensure that the disc
contains closed caption information and your TV set also
supports this function.
•
Select [Closed Caption] in [VIDEO] menu.
On
Select this to enable the closed caption function.
Off
Select this to disable the closed caption function.
Note
This function is only available for CVBS (composite video) and
S-video output.
Setting the still mode
You can select the picture quality for pausing or frame-byframe playback.
•
Select [Still Mode] in [VIDEO] menu.
Frame
Select this if the picture is unstable when you select
[Field].
Field
Select this for the standard still mode setting. This setting
is suitable for playback of quick motion scenes.
Selecting the scan function
This function is only available if you have connected this
unit to a progressive scan TV through the component
video jacks (see “Component video jacks <C>” on
page 12). This function is enable you to enjoy accurate
color reproduction and high quality images. This unit
features DCDi circuit.
•
Select [Component] in [VIDEO] menu.
Progressive
Select this to enable the progressive scan function. The
confirmation screen appears if you select this. In this case,
select [Yes] and then press ENTER.
Interlaced
Select this to enable the interlaced scan function.
y
The P.SCAN indicator on the front panel display lights up during
progressive playback.
Notes on activating progressive scan:
• While HDMI video signals are being output, component
video is fixed to interlaced video.
• In progressive mode, 4:3 aspect images are stretched
horizontally on the widescreen TV. Change the aspect
ratio settings of your TV if you want to watch the
original aspect ratio images without distortion. You can
also change the aspect ratio settings in [Wide Screen
Format] menu (see “Selecting the wide screen format”
on page 34).
• Ensure that your TV is equipped with progressive scan.
• Connect using a component video cable.
35 En
English
Selecting the black level
(U.S.A. and Canada models only)
01EN_DVD-S1800_U.book Page 36 Thursday, July 19, 2007 1:28 PM
SETUP MENU
HDMI setup menu
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE “STANDARD
DEFINITION” OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR VIDEO MONITOR COMPATIBILITY
WITH THIS MODEL 525P AND 625P DVD PLAYER,
PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.
SETUP
GENERAL
AUDIO
Select this setting to toggle the video signal output from
the AV terminal between CVBS (composite video) and
RGB.
•
Select [Scart Video Out] in [VIDEO] menu.
CVBS
Select this to output composite video signals.
RGB
Select this to output RGB video signals.
Note
This unit does not output S-video signal from the AV terminal.
HDMI Video
DVI Output Range
HDMI Audio
SPEAKER
VIDEO
HDMI
This unit is compatible with the complete line of Yamaha
products, including the projectors DPX-1300, DPX-830 and
the plasma monitor PDM-4220.
Switching the SCART video out
(U.K., Europe, and Russia models
only)
1/1
DISC
Move :
Return
Select : Enter
Setting the HDMI video
You can adjust the resolution depending on the monitor
you are using. This function is only available when this
unit is connected to an HDMI-compatible component via
the HDMI jack.
This unit is compatible with the following video formats:
480p/60 Hz, 576p/50 Hz, 720p/50 Hz, 60 Hz, 1080i/50
Hz, 60 Hz, and 1080p/50 Hz, 60 Hz.
•
Select [HDMI Video] in [HDMI] menu.
480p/576p
Select this for 480/576 progressive-scan video.
720p
Select this for 720 progressive-scan video.
1080i
Select this for 1080 interlaced-scan video.
1080p
Select this for 1080 progressive-scan video.
Auto
Select this to set this unit to the best resolution setting
automatically based on your monitor.
Notes
• When [TV Type] is set to [NTSC] or [PAL], video signals with
480p or 576p are output accordingly.
• While HDMI video signals are being output, component video
is fixed to interlaced video.
• For settings other than [Auto], make sure that the selected
resolution is supported by the HDMI-compatible monitor you
are using.
If the selected resolution is not supported, this setting is
automatically switched to the most appropriate resolution, and
the newly selected resolution is displayed in the top left corner
of the display and in the front panel display temporarily.
• When you select [1080p] and use an HDMI cable longer than
5 m (16 ft), the picture quality may decrease.
36 En
01EN_DVD-S1800_U.book Page 37 Thursday, July 19, 2007 1:28 PM
SETUP MENU
y
SETUP
GENERAL
Selecting the DVI output range
AUDIO
SPEAKER
VIDEO
Set the HDMI audio output to match the connected
component. This function is only available when this unit
is connected to an HDMI-compatible component via the
HDMI jack.
For details about the relationship between the audio
format and the setting, see “HDMI audio output” on
page 13.
•
Select [HDMI Audio] in [HDMI] menu.
Subtitle Language
Angle Mark
PBC
Time Interval
DISC
Standard
Select this if you cannot see the correct image when you
select [Enhanced].
Setting the HDMI audio
AUDIO Language
HDMI
Select [DVI Output Range] in [HDMI] menu.
Enhanced
Select this if black and white in the image is not distinct.
1/1
DVD Menu Language
You can select the DVI output range to match the
connected component. This function is only available
when this unit is connected to an DVI-D-compatible
component via the HDMI jack.
•
English
DISC setup menu
• Refer to the manual supplied with your monitor to select the
appropriate aspect ratio.
• You can also select the HDMI resolution by pressing HDMI on
the remote control repeatedly.
Move :
Return
Select : Enter
Selecting the default audio/subtitle/
DVD menu language
These menus contain various language options for the
audio, subtitles and disc menus recorded on the DVD. For
details, see “Setting the audio, subtitle and disc menu
languages” on page 17.
Selecting an angle mark display
You can switch an angle mark display on or off when
sequences recorded from different camera angles are
played back.
•
Select [Angle Mark] in [DISC] menu.
Auto
Select this to set this unit to the best setting automatically
based on the component you have connected via the
HDMI jack.
On
Select this if you want to display an angle mark. An angle
mark is displayed continuously.
PCM
Select this to output the decoded multi-channel or 2ch
linear PCM audio signals via the HDMI jack.
Off
Select this if you do not want to display an angle mark. An
angle mark appears for five seconds, and then disappears.
Off
Select this to turn off the HDMI audio output.
Notes
• SA-CD signals cannot be output using HDMI.
• When [HDMI Audio] is set to [Auto] or [PCM], digital output
signals are muted.
37 En
01EN_DVD-S1800_U.book Page 38 Thursday, July 19, 2007 1:28 PM
SETUP MENU
Selecting the PBC (playback control)
function
You can set playback control (PBC) to on or off. This
function is available only on Video CD 2.0 with the
playback control (PBC) feature.
•
Select [PBC] in [DISC] menu.
On
Select this to display a disc menu.
Off
Select this not to display a disc menu.
y
You can also use the MENU button on the remote control to turn
on or off the playback control (PBC) function (see “Using the
Video CD playback control (PBC) menu (VCD/SVCD)” on
page 21).
Setting the duration for a slide show
You can set the duration that the slides for JPEG files are
displayed.
•
Select [Time Interval] in [DISC] menu.
2 sec to 10 sec
Control step: 1 second
Note
This setting may not work correctly depending on file sizes.
38 En
01EN_DVD-S1800_U.book Page 39 Thursday, July 19, 2007 1:28 PM
LANGUAGE CODE LIST
English
LANGUAGE CODE LIST
Abkhazian
1112
Fiji
1620
Lingala
2224
Singhalese
2919
Afar
1111
Finnish
1619
Lithuanian
2230
Slovak
2921
Afrikaans
1116
French
1628
Macedonian
2321
Slovenian
2922
Albanian
2927
Frisian
1635
Malagasy
2317
Somali
2925
Amharic
1123
Galician
1722
Malay
2329
Spanish
1529
Arabic
1128
Georgian
2111
Malayalam
2322
Sundanese
2931
Armenian
1835
German
1415
Maltese
2330
Swahili
2933
Assamese
1129
Greek
1522
Maori
2319
Swedish
2932
Aymara
1135
Greenlandic
2122
Marathi
2328
Tagalog
3022
Azerbaijani
1136
Guarani
1724
Moldavian
2325
Tajik
3017
Bashkir
1211
Gujarati
1731
Mongolian
2324
Tamil
3011
Basque
1531
Hausa
1811
Nauru
2411
Tatar
3030
Bengali; Bangla
1224
Hebrew
1933
Nepali
2415
Telugu
3015
Bhutani
1436
Hindi
1819
Norwegian
2425
Thai
3018
Bihari
1218
Hungarian
1831
Oriya
2528
Tibetan
1225
Breton
1228
Icelandic
1929
Panjabi
2611
Tigrinya
3019
Bulgarian
1217
Indonesian
1924
Pashto, Pushto
2629
Tonga
3025
Burmese
2335
Interlingua
1911
Persian
1611
Turkish
3028
Byelorussian
1215
Irish
1711
Polish
2622
Turkmen
3021
Cambodian
2123
Italian
1930
Portuguese
2630
Twi
3033
Catalan
6765
Japanese
2011
Quechua
2731
Ukrainian
3121
Chinese
3618
Javanese
2033
Raeto-Romance
2823
Urdu
3128
Corsican
1325
Kannada
2124
Romanian
2825
Uzbek
3136
Croatian
1828
Kashmiri
2129
Russian
2831
Vietnamese
3219
Czech
1329
Kazakh
2121
Samoan
2923
Volapük
3225
Danish
1411
Kirghiz
2135
Sanskrit
2911
Welsh
1335
Dutch
2422
Korean
2125
Scots Gaelic
1714
Wolof
3325
English
1524
Kurdish
2131
Serbian
2928
Xhosa
3418
Esperanto
1525
Laothian
2225
Serbo-Croatian
2918
Yiddish
2019
Estonian
1530
Latin
2211
Shona
2924
Yoruba
3525
Faroese
1625
Latvian, Lettish
2232
Sindhi
2914
Zulu
3631
39 En
01EN_DVD-S1800_U.book Page 40 Thursday, July 19, 2007 1:28 PM
TROUBLESHOOTING
TROUBLESHOOTING
Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below
or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized
Yamaha dealer or service center.
Problem
No power
No picture
Completely distorted picture or
black/white picture
The screen size looks unnatural,
or the caption is displayed only
partially on the TV monitor or is
not displayed at all
40 En
Solution
See
page
Connect the AC power cable properly.
14
Press STANDBY/ON on the front panel of this unit to turn on the
power.
15
Refer to the manual supplied with your TV for correct Video In
channel selection. Change the TV channel until you see the DVD
screen.
–
Turn on your TV.
–
Make sure that all connections on this unit and on all other
components are secure.
10
If [Component] is set to [Progressive], check that you have connected
this unit to a progressive scan TV through the component video jacks.
Otherwise, follow the steps below to turn off the progressive scan;
1. Press
on the front panel to open the disc tray.
2. Press CLEAR on the remote control.
3. Press “2580” using the numeric buttons (0-9) on the remote
control.
4. Press AUDIO on the remote control.
35
If [HDMI Video] is set to other than [Auto], check that the resolution
is supported by the HDMI-compatible monitor you have connected.
Otherwise, follow the steps below to change the setting to [Auto];
1. Press s twice on the front panel or STOP ( 7 ) twice on the
remote control to stop playback.
2. Press and hold s and p/e on the front panel at the same time for
three seconds.
36
If the HDMI indicator flashes orange, check that you have connected
this unit to an HDCP-compatible component.
12
Check that the video signal output setting matches the video
connection.
36
Check that the disc is compatible with this unit.
3
Check that the TV type of this unit is set to match that of the disc and
your TV. If you set the TV type improperly, follow the steps below to
restore the TV Type setting to the default setting;
1. Press
on the front panel to open the disc tray.
2. Press CLEAR on the remote control.
3. Press “2580” using the numeric buttons (0-9) on the remote
control.
4. Press AUDIO on the remote control.
16
Check the video connection.
11
Check that the TV setting of this unit matches the screen aspect ratio
of your TV.
34
Change the screen size and the aspect ratio of your TV.
–
01EN_DVD-S1800_U.book Page 41 Thursday, July 19, 2007 1:28 PM
TROUBLESHOOTING
No sound or distorted sound
No audio at digital output
No audio at HDMI output
Disc does not play
Solution
See
page
Adjust the volume on the TV or the AV receiver.
–
Check that the speakers are connected properly.
–
Adjust the volume level in the setup menu.
33
Check the digital connections.
11
If you are playing a DTS source, check that your receiver can decode
DTS and [Digital Out] is set to [All].
31
If you are playing an MPEG-2 source, check that your receiver can
decode MPEG-2. Otherwise, make sure that [Digital Out] is set to
[PCM].
31
Check that the audio format of the selected audio option on the disc
matches your receiver capabilities.
–
Make sure that [HDMI Audio] is set to [Auto] or [PCM].
37
No audio signals via the HDMI jack are output if the DVI-D
component is connected to this unit using the HDMI-DVI converter
cable.
To output audio signals via the HDMI jack, connect an HDMI
component to this unit.
12
Check that the disc format is supported.
3, 44
The CD-R/RW, DVD+R/RW and DVD-R/RW must be finalized.
–
Check that the disc label is facing up.
18
Check that the disc is defective by trying another disc.
–
If you have recorded a JPEG, MP3 or WMA disc yourself, check that
your disc contains at least ten JPEG picture files or five MP3/WMA
music tracks.
–
Check the region code of the DVD disc.
3
Picture freezes momentarily
during playback
Check the disc for fingerprints/scratches and clean it with a soft cloth
wiping from the center to the edge.
4
This unit does not respond to
the remote control
Aim the remote control directly at the remote control sensor on the
front panel.
15
Reduce the distance of the remote control from this unit.
15
Replace the batteries in the remote control.
15
Reinsert the batteries with their polarities (+/– signs) as indicated.
15
Buttons do not work
Disconnect the power cable from the AC outlet for a few minutes.
Reconnect the power cable and try to operate again as usual.
–
This unit does not respond to
some operating commands
during playback
Operations may not be permitted by the disc. Refer to the instructions
of the disc jacket.
–
Menu items cannot be selected
Depending on the connection status or disc availability, some menu
items cannot be selected.
–
Cannot play back SA-CD disc
When [SA-CD mode] is set to [CD], this unit does not play back
SA-CD discs which does not have CD layer.
29
No sound during DivX® movies
playback
The audio code may not be supported by this unit.
–
41 En
English
Problem
01EN_DVD-S1800_U.book Page 42 Thursday, July 19, 2007 1:28 PM
GLOSSARY
GLOSSARY
■ Aspect ratio
■ Dolby Digital
Horizontal and vertical ratio of a displayed image. The
horizontal vs. vertical ratio of conventional TV is 4:3, and
that of wide-screens is 16:9.
Digital surround sound system which is developed by
Dolby Laboratories provides completely independent
multi-channel audio. With 3 front channels (left, center,
and right) and 2 surround stereo channels, Dolby Digital
provides five full-range audio channels. With an additional
channel especially for bass effects (called LFE, or low
frequency effect), the system has a total of 5.1-channels
(LFE is counted as 0.1 channel). By using 2-channel
stereo for the surround speakers, more accurate moving
sound effects and surround sound environment are
possible than with Dolby Surround.
■ Bit
Short for binary digit. Represents the smallest unit of
information manipulated on a computer. In audio systems,
the bit size determines resolution to digitize analog
signals.
The larger the bit size, the larger the dynamic range (the
ratio of maximum and minimum frequency level) and the
finer the sounds. Generally, an audio CD is 16 bit and
DVD audio is 24 bit.
■ Bit rate
The amount of data used to hold a given length of music;
measured in kilobits per second, or kbps. Also, the speed
at which you record. Generally, the higher the bit rate, or
recording speed, the better the sound quality. However,
higher bit rates use more space on a disc.
■ Component video jacks
Jacks for inputting or outputting a component video
signal. Component video signal consists of three lines, the
luminance signal (Y) and two color difference signals (PB/
CB, PR/CR), which enable to provide high-quality video.
■ DivX®
DivX® is a popular media technology created by DivX,
inc. DivX® media files contain highly compressed video
with high visual quality that maintains a relatively small
file size. DivX® files can also include advanced media
features like menus, subtitles, and alternate audio tracks.
Many DivX® media files are available for download
online, and you can create your own using your personal
content and easy-to-use tools from DivX.com.
42 En
■ DTS
Digital surround sound system developed by DTS, Inc.,
which provides 5.1 channel audio (max). With an
abundance of audio data, it is able to provide authenticsounding effects.
■ DVD-Audio
It has developed for the sole purpose of creating high
quality pure sound with Linear PCM and Packed PCM
(lossless coding) in up to six audio-channels. Sampling
frequencies of 192 kHz/24 bits are supported.
■ HDMI
HDMI (High-Definition Multimedia Interface) is the first
industry-supported, uncompressed, all-digital A/V (audio/
video) interface. Providing an interface between any A/V
source (such as a set-top box or A/V receiver) and an
audio/video monitor (such as a digital television – DTV),
HDMI supports standard, enhanced or high-definition
video as well as multi-channel digital audio using a single
cable.
HDMI transmits all ATSC (Advanced Television Systems
Committee) HDTV standards and supports 8-channel
digital audio, with bandwidth to spare to accommodate
future enhancements and requirements.
01EN_DVD-S1800_U.book Page 43 Thursday, July 19, 2007 1:28 PM
GLOSSARY
■ Region code
The most common type of scanning used in televisions. It
divides a screen into even and odd numbered fields for
scanning, and then builds an image by combining them
into one image (frame).
Many DVD discs include a region code so that the
copyright owner can control DVD software distribution
only to regions where they are ready to distribute. There
are six regions codes, which restrict a DVD player to
playing a DVD disc with the same region code.
■ JPEG (Joint Photographic Expert Group)
A standardized image compression system proposed by
the Joint Photographic Expert Group. It can reduce image
data sizes to 1 to 10% of their original sizes, and works on
digital photographs effectively.
■ MP3 (MPEG Audio Layer-3)
An audio file compression technology. It can reduce audio
data sizes to about 10% of their original sizes while
maintaining CD-level audio quality.
■ MPEG (Moving Pictures Experts Group)
International standard for digital video and audio
compression generated by ISO (International Organization
for Standardization) and IEC (International
Electrotechnical Commission).
Includes MPEG-1, MPEG-2, and MPEG-3. MPEG-1
offers VHS level video quality and is often used on video
CDs. MPEG-2 offers S-VHS level video quality and is
often used on DVDs.
■ S-video jack
A jack for inputting or outputting an S-video signal.
S-video signal consists of two lines, the luminance signal
(Y) and color signal (C), which enable to provide highquality video during playback or recording.
■ Super Audio CD
Audio format based upon the current CD standards but
includes a greater amount of information that provides
higher quality sound. There are three types of discs: single
layer, dual layer and hybrid discs. The hybrid disc can be
played on existing CD players as well as Super Audio CD
players since it contains both standard audio CD and
Super Audio CD information.
Super Audio CD Disc
Hybrid layer disc
Dual layer disc
Single layer disc
HD layer
HD layer
■ Parental control
Limits Disc play according to the age of the users or the
limitation level in each country. The limitation varies from
disc to disc; when it is activated, playback will be
prohibited if the software’s level is higher than the user-set
level.
CD layer
HD layer
Hybrid Super Audio CD Disc
1 CD layer that plays on any
CD player
High Density layer containing:
■ Playback control (PBC)
An on-screen menu recorded on a Video CD or SVCD that
enables interactive playback and searching.
2 - High Quality DSD Stereo
3 - High Quality DSD Multi-
channel
■ Progressive Scan
A method of displaying all scanning lines in a frame at
once, reducing flicker noticeable on a larger screen and
creating a sharp and smooth image.
43 En
English
■ Interlace
01EN_DVD-S1800_U.book Page 44 Thursday, July 19, 2007 1:28 PM
SPECIFICATIONS
SPECIFICATIONS
PLAYBACK SYSTEM
TV STANDARD
•
•
•
•
•
•
•
•
•
• Number of lines........................................PAL: 625, NTSC: 525
• Vertical frequency............................ PAL: 50 Hz, NTSC: 60 Hz
• Playback..........................................Multistandard (PAL/NTSC)
DVD-Video
DVD-Audio
DVD-R, DVD-RW
DVD+R, DVD+RW, DVD+R DL
Video CD, SVCD
SA-CD multi-channel and SA-CD stereo
CD
PICTURE CD
CD-R, CD-RW
VIDEO PERFORMANCE
• Video (CVBS) output ................................... 1 Vpp into 75 ohm
• S-video output.......................................... Y: 1 Vpp into 75 ohm
C: 0.3 Vpp into 75 ohm
• Component video output.......................... Y: 1 Vpp into 75 ohm
PB/CB, PR/CR: 0.7 Vpp into 75 ohm
• RGB (SCART) output
(U.K., Europe, and Russia models only)
.................................................................... 0.7 Vpp into 75 ohm
• Black level shift
(U.S.A. models only) ....................................................... On/Off
AUDIO FORMAT
• Digital
Dolby Digital / DTS / MPEG....................Compressed Digital
PCM ........................ 16, 20, 24 bits / fs 44.1, 48, 88.2, 96 kHz
MP3 (ISO 9660)
.................. 32–320 kbps / fs 16, 22.05, 24, 32, 44.1, 48 kHz
WMA ............................................ 64–320 kbps, mono, stereo
• Full decoding of Dolby Digital and DTS multi-channel sound
• Analog stereo sound
• Dolby surround compatible downmix from Dolby Digital multichannel sound
AUDIO PERFORMANCE
•
•
•
•
DA Converter......................................................24 bit, 192 kHz
Signal-Noise (1 kHz) .......................................................115 dB
Dynamic range (1 kHz)....................................................105 dB
DVD......................................................fs 96 kHz, 2 Hz–44 kHz
fs 48 kHz, 2 Hz–22 kHz
• SVCD....................................................fs 48 kHz, 2 Hz–22 kHz
fs 44.1 kHz, 2 Hz–20 kHz
• CD/VCD ............................................fs 44.1 kHz, 2 Hz–20 kHz
• Distortion and Noise (1 kHz).......................................... 0.002%
44 En
CONNECTIONS
• Video output.................................................... 1 (Cinch: yellow)
• S-video output............................................ 1 (Mini DIN, 4 pins)
• Component video output
Y output.......................................................... 1 (Cinch: green)
PB/CB output .................................................... 1 (Cinch: blue)
PR/CR output ...................................................... 1 (Cinch: red)
• SCART (U.K., Europe, and Russia models only)
........................................................................ 1 (Euroconnector)
• Digital output
Coaxial ......................................................... 1 (Cinch: orange)
Optical..................................1 (IEC 60958 for CDDA/LPCM,
IEC 61937 for MPEG 1/2, Dolby Digital, DTS)
HDMI ......................................................................1 (Type A)
• 2 channel analog output (L+R) ............ 1 pair (Cinch: white/red)
• 6 channel analog output
Audio Front L/R................................ 1 pair (Cinch: white/red)
Audio Surround L/R.......................... 1 pair (Cinch: white/red)
Audio Center ...................................................1 (Cinch: black)
Audio Subwoofer ............................................1 (Cinch: black)
CABINET
• Dimensions (W x D x H) .......................... 435 x 284.5 x 87 mm
(17–1/8 x 11–3/16 x 3–7/16 inch)
• Weight............................................ Approx. 3.3 kg (7 lbs. 4 oz.)
POWER SUPPLY
• Power inlet
U.S.A. and Canada models .......................... AC 120 V, 60 Hz
U.K. and Europe models .............................. AC 230 V, 50 Hz
Korea and Taiwan models............... AC 100–240 V, 50/60 Hz
Asia model ...................................... AC 100–240 V, 50/60 Hz
Russia model ................................................ AC 230 V, 50 Hz
• Power consumption...............................................Approx. 21 W
• Power consumption (standby)............................. less than 0.5 W
Specifications are subject to change without prior notice.
00cv_DVD-S1800_U.fm Page 1 Wednesday, July 18, 2007 2:38 PM
U
CARACTÉRISTIQUES TECHNIQUES
SYSTEME DE LECTURE
STANDARD TV
•
•
•
•
•
•
•
•
•
• Nombre de lignes .....................................PAL: 625, NTSC: 525
• Fréquence verticale .......................... PAL: 50 Hz, NTSC: 60 Hz
• Lecture .......................................... Multistandards (PAL/NTSC)
DVD-Vidéo
DVD-Audio
DVD-R, DVD-RW
DVD+R, DVD+RW, DVD+R DL
Vidéo CD, SVCD
SA-CD multicanaux et SA-CD stéréo
CD
CD D’IMAGES
CD-R, CD-RW
PERFORMANCES VIDEO
• Sortie vidéo (CVBS) ......................................1 Vcc sur 75 ohms
• Sortie S-vidéo............................................Y: 1 Vcc sur 75 ohms
C: 0,3 Vcc sur 75 ohms
• Sortie vidéo composante ...........................Y: 1 Vcc sur 75 ohms
PB/CB, PR/CR: 0,7 Vcc sur 75 ohms
• Sortie RGB (Péritel)
(Modèle pour le Royaume-Uni, l’Europe et la Russie seulement)
.....................................................................0,7 Vcc sur 75 ohms
• Réglage de niveau du noir
(Modèles pour les États-Unis) .......................................Oui/Non
FORMAT AUDIO
• Numérique
Dolby Digital / DTS / MPEG................Numérique compressé
PCM ........................ 16, 20, 24 bits / fs 44,1, 48, 88,2, 96 kHz
MP3 (ISO 9660)
................. 32 –320 kbps / fs 16, 22,05, 24, 32, 44,1, 48 kHz
WMA ............................................ 64–320 kbps, mono, stéréo
• Décodage complet du son multicanaux Dolby Digital et DTS
• Son stéréo analogique
• Mixage compatible avec le Dolby Surround à partir d’un son
multicanaux Dolby Digital
PERFORMANCES AUDIO
•
•
•
•
Convertisseur NA.............................................. 24 bits, 192 kHz
Rapport Signal sur Bruit (1 kHz) ....................................115 dB
Plage dynamique (1 kHz).................................................105 dB
DVD......................................................fs 96 kHz, 2 Hz–44 kHz
fs 48 kHz, 2 Hz–22 kHz
• SVCD....................................................fs 48 kHz, 2 Hz–22 kHz
fs 44,1 kHz, 2 Hz–20 kHz
• CD/VCD ............................................fs 44,1 kHz, 2 Hz–20 kHz
• Distorsion et Bruit (1 kHz) ............................................. 0,002%
DVD AUDIO/VIDEO SA-CD PLAYER
LECTEUR DVD AUDIO/VIDEO SA-CD
RACCORDEMENTS
• Sortie vidéo ........................................................1 (Cinch: jaune)
• Sortie S-vidéo........................................1 (Mini DIN, 4 broches)
• Sortie vidéo composante
Sortie Y ............................................................. 1 (Cinch: vert)
Sortie PB/CB .................................................... 1 (Cinch: bleu)
Sortie PR/CR ................................................... 1 (Cinch: rouge)
• Péritel (Modèles pour le Royaume-Uni,
l’Europe et la Russie seulement)
.............................................................................1 (Prise péritel)
• Sortie numérique
Coaxiale ....................................................... 1 (Cinch: orange)
Optique.............................. 1 (IEC 60958 pour CDDA/LPCM,
IEC 61937 pour MPEG 1/2, Dolby Digital, DTS)
HDMI ......................................................................1 (Type A)
• Sortie analogique 2 canaux (G+D)
........................................................ 1 paire (Cinch: blanc/rouge)
• Sortie analogique 6 canaux
Audio avant G/D ......................... 1 paire (Cinch: blanc/rouge)
Audio ambiance G/D .................. 1 paire (Cinch: blanc/rouge)
Audio Centre .....................................................1 (Cinch: noir)
Audio Caisson de graves...................................1 (Cinch: noir)
DVD-S1800
CABINET
• Dimensions (L x P x H) ............................ 435 x 284,5 x 87 mm
• Poids.................................................................... Approx. 3,3 kg
ALIMENTATION
• Prise d’alimentation commutée
Modèles pour le Canada et les États-Unis ... CA 120 V, 60 Hz
Modèles pour l’Europe, y compris le Royaume-Uni.... CA 230 V, 50 Hz
Modèles pour la Corée et Taïwan.... CA 100–240 V, 50/60 Hz
Modèle pour l’Asie ......................... CA 100–240 V, 50/60 Hz
Modèle pour la Russie................................. CA 230 V, 50 Hz
• Consommation ......................................................Approx. 21 W
• Consommation (veille)................................... inférieure à 0,5 W
Les caractéristiques peuvent être modifiées sans préavis.
© 2007
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
All rights reserved.
Printed in China
CQX1A1275Z
HDMI
STANDBY
ON
AUDIO DIRECT