G
DVD AUDIO/VIDEO SA-CD PLAYER
LECTEUR DE DVD AUDIO/VIDEO SA-CD
DVD-S657
DVD-S657
©2005
YAMAHA
YAMAHA
YAMAHA
YAMAHA
YAMAHA
YAMAHA
YAMAHA
ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
Printed
All rights reserved.
in Hungary
3139 246 15093
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
2 Install this sound system in a well ventilated, cool,
dry, clean place — away from direct sunlight, heat
sources, vibration, dust, moisture, or cold. In a
cabinet, allow about 2.5cm (1 inch) of free space
all around this unit for adequate ventilation.
3 Locate this unit away from other electrical
appliances, motors, or transformers to avoid
humming sounds.
4 Do not expose this unit to sudden temperature
changes from cold to hot, nor locate this unit in
an environment with high humidity (i.e., a room
with a humidifier) to prevent condensation inside
this unit, which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
5 Avoid installing this unit in a location where
foreign objects may fall onto this unit or where
this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
– Other components, as they may cause damage
and/or discoloration on the surface of this unit.
– Burning objects (i.e., candles), as they may
cause fire, damage to this unit, and/or personal
injury.
– Containers with liquid in them, as they may fall,
spilling the liquid and causing an electrical
shock to the user and/or damage to this unit.
6 Do not cover this unit with a newspaper,
tablecloth, curtain, etc. in order not to obstruct
heat radiation. If the temperature inside this unit
rises, it may cause fire, damage to this unit, and/or
personal injury.
7 Do not plug in this unit to a wall outlet until all
connections are complete.
8 Do not operate this unit upside-down. It may
overheat, possibly causing damage.
9 Do not use excessive force on switches, knobs
and/or cords.
10 When disconnecting the power cord from the
wall outlet, grasp the plug; do not pull the cord.
11 Do not clean this unit with chemical solvents; this
might damage the finish. Use a clean, dry cloth.
12 Use only the voltage specified on this unit. Using
this unit with a higher voltage than specified is
dangerous and may cause fire, damage to this
unit, and/or personal injury. YAMAHA will not be
held responsible for any damage resulting from
use of this unit with a voltage other than as
specified.
iii
13 To prevent damage by lightning, disconnect the
power cord from the wall outlet during an
electrical storm.
14 Do not attempt to modify or fix this unit. Contact
qualified YAMAHA service personnel when any
service is needed. The cabinet should never be
opened for any reason.
15 When not planning to use this unit for long
periods of time (i.e., vacation), disconnect the AC
power plug from the wall outlet.
16 Be sure to read the “Troubleshooting” section on
common operating errors before concluding that
this unit is faulty.
17 Before moving this unit, press STANDBY/ON to
set the unit in standby mode, then disconnect the
AC power plug from the wall outlet.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
When playing DTS encoded CDs, excessive noise will
be heard from the analog stereo outputs. To avoid
possible damage to the audio system, the consumer
should take proper precautions when the analog
stereo outputs of the player are connected to an
amplification system. To enjoy DTS Digital
Surround™ playback, an external 5.1-channel DTS
Digital Surround™ decoder system must be
connected to the digital output of the player.
LASER SAFETY
This unit employs a laser. Due to possible eye injury,
only a qualified service person should remove the
cover or attempt to service this device.
DANGER
This unit emits visible laser radiation when open.
Avoid direct eye exposure to beam.
When this unit is plugged into a wall outlet, do not
place your eyes close to the opening of the disc tray
and other openings or look inside.
Contents
Disc Operations
Region Codes..............................................................3
Supplied accessories ..................................................3
Notes about discs ......................................................3
Cleaning discs..............................................................3
Patent information .....................................................3
Basic Playback........................................................... 14
General Operation.................................................. 14
Pausing playback.................................................................14
Selecting track/chapter ...................................................14
Searching backward/forward.......................................14
Stopping playback..............................................................14
Selecting various repeat/shuffle functions.......... 15
Repeat......................................................................................15
Repeating a section within a chapter/track.........15
Shuffle.......................................................................................15
Operations for video playback (DVD/VCD/SVCD) .... 15
Using the Disc Menu .......................................................15
Zooming in............................................................................16
Resuming playback from the last stopped
point..........................................................................................16
On-Screen Display (OSD)...........................................16
Special DVD Features ............................................ 17
Playing a Title .......................................................................17
Camera Angle......................................................................17
Audio........................................................................................17
Subtitles...................................................................................17
Special VCD & SVCD Features............................ 18
Playback Control (PBC).................................................18
Preview Function ...............................................................18
DVD-Audio Features.............................................. 19
Changing pages ...................................................................19
Playing bonus groups.......................................................19
DVD-Video mode ............................................................19
SA-CD (Super Audio CD) .................................... 20
Playing a disc.........................................................................20
Changing the SA-CD playback area and layer.....20
Playing MP3/DivX/JPEG/Kodak Picture CD......... 21
General Operation ...........................................................21
Selecting a folder and track/file..................................21
Repeat......................................................................................21
Special picture disc features.................................. 22
Preview Function (JPEG) ...............................................22
Zoom picture.......................................................................22
Playback with multi-angles............................................22
Scan Effect..............................................................................22
Playing MP3 music and JPEG picture
simultaneously .....................................................................22
Functional Overview
Front Panel ..................................................................4
Rear Panel ....................................................................5
Remote Control.........................................................6
Preparation
General Notes on connections ..............................7
Digital Connections ...................................................7
Analog Connections ..................................................8
6ch discrete jacks..................................................................8
MIXED 2CH jacks................................................................8
Video Connections ....................................................9
S-Video terminal <A>.......................................................9
Composite Video terminal <B>..................................9
Component Video terminal <C> ..............................9
SCART Connection <D>...............................................9
Getting Started
Inserting batteries into the Remote Control ... 10
Using the remote control .............................................10
Turning on the power............................................ 10
Selecting the color system that corresponds to
your TV ..................................................................... 10
Setting language preference .................................. 11
Setting the OSD Language...........................................11
Setting the Audio, Subtitle and Disc menu
language...................................................................................12
Setting Speaker Channels...................................... 12
1
English
Introduction
Contents
Setup Menu
General Setup Menu............................................... 23
Selecting DVD-Audio/Video mode ........................23
Locking/Unlocking the disc for viewing.................23
Dimming player’s front panel display .....................23
Programming disc tracks (not for Picture
CD/MP3)................................................................................24
OSD Language....................................................................24
Screen Saver.........................................................................24
Sleep Timer...........................................................................25
DivX® VOD registration code..................................25
Audio Setup Menu .................................................. 25
Setting the analog output..............................................25
Setting the Digital output..............................................26
Speaker Setup......................................................................26
CD Upsampling ..................................................................26
Night Mode...........................................................................27
Video Setup Menu................................................... 27
TV Type ..................................................................................27
Setting the TV Display....................................................27
Progressive ............................................................................28
Picture Setting......................................................................28
Switching the YUV/RGB................................................29
Preference Setup Menu ......................................... 29
Audio, Subtitle, Disc Menu ..........................................29
Restricting playback by Parental Control .............29
PBC (Playback Control).................................................30
MP3/JPEG Menu.................................................................30
Playback of VR Format ...................................................30
Changing the Password..................................................32
Restoring to original settings .......................................32
2
Language Codes .................... 33
Troubleshooting.................... 35
Glossary ................................. 37
Specifications......................... 39
02_EN_body_DVD-S657_G.fm Page 3 Friday, April 15, 2005 10:55 AM
Introduction
Region Codes
DVD discs must be labeled for
ALL regions or Region 2 in
order to play on this Player. You
cannot play discs that are labeled
for other regions.
ALL
2
Supplied accessories
– Remote control
– Batteries (two AA size) for remote
control
– Audio pin cable
– Video pin cable
– Owner’s Manual
– Do not use any non standard shaped
discs (heart, etc.).
– Do not use disc with tape, stickers, or
paste on it. Doing so may damage the
unit.
– Do not use a disc which has been
printed on its surface by a commercially
available label printer.
Cleaning discs
• When a disc becomes dirty, clean it
with a cleaning cloth. Wipe the disc
from the center out. Do not wipe in a
circular motion.
• Do not use solvents such as benzine,
thinner, commercially available cleaners,
or antistatic spray intended for analog
records.
Patent information
Notes about discs
– This unit is designed for use with DVD
video, Video CD, Super video CD,
DVD-Audio, Super Audio CD (SA-CD),
Audio CD, CD-R, CD-RW, DVD+RW,
DVD+R, DVD-R, DVD-RW and DVDRW (VR format).
This unit can play:
– MP3, picture (Kodak, JPEG) files on CDR(W).
– JPEG/ISO 9660 format
– Maximum 30 characters display.
– DivX® disc on CD-R[W]/DVD+R[W]/
DVD-R[W] (3.11, 4.x and 5.x)
– Dual layer DVDs
– CD-R, CD-RW, DVD+R/RW, DVD-R/
RW and DVD-RW (VR format) cannot
be played unless finalized.
– Some discs cannot be played depending
on the recording conditions such as PC
environment and application software.
The characteristics and condition of the
discs; materials, scratches, curvature,
etc., may result in failure.
– Be sure to use only CD-R and CD-RW
discs made by reliable manufacturers.
Manufactured under license from
Dolby Laboratories.
“Dolby”, “Pro Logic”, and the
double-D symbol are trademarks
of Dolby Laboratories.
“DTS” and “DTS Digital
Surround” are registered
trademarks of Digital Theater
Systems, Inc.
DivX, DivX Certified, and
associated logos are trademarks
of DivXNetworks, Inc and are
used under license.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorized by
Macrovision Corporation, and is intended for home
and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
3
English
Thank you for purchasing this unit. This
Owner’s Manual explains the basic
operation of this unit.
Functional Overview
Front Panel
9 STOP
– stops playback
STANDBY/ON
– turns on this unit or sets it to the
standby mode
; PAUSE
– pauses playback
B PLAY
– starts playback
Disc tray
DVD-AUDIO indicator
– lights up when the player detects
DVD-Audio signals
SA-CD indicator
– lights up when the player detects
SA-CD signals
PROGRESSIVE indicator
– lights up when the unit enters
Progressive mode
/ OPEN/CLOSE
– opens or closes the disc tray
Front panel display
– shows information about the
operational status of the unit
A.DRCT
– lights up when you enter the AUDIO
DIRECT mode by pressing the AUDIO
DIRECT button on the remote control
during audio disc playback
ML.CH
– lights up when you play multi-channel
audio source
D.MIX
– lights up when you play the discs that
allow down mixing of the multi-channel
audio sources
A.DRCT
4
ML.CH
D.MIX
Functional Overview
English
Rear Panel
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
5
Functional Overview
Remote Control
AUDIO DIRECT
– switches video output on and
off during audio disc playback
B/ |
– turns on this player or sets it
to the standby mode
PAGE
– turns the pages of
DVD-Audio still pictures
numeric buttons
– selects numbered items in the
currently displayed menu
DIMMER
– use to select from 3 different
brightness levels
for the display
ON SCREEN
– accesses or clears the player’s
On Screen Display menu
SOUND MODE
– selects a sound mode: Stereo,
Virtual Surround or Multi-channel
– changes the SA-CD
playback area
TOP MENU/RETURN
– displays the top-level disc
menu (DVD)
– moves back to the previous
menu (VCD)
MENU
– accesses the disc’s menu
(for DVDs)
– switches PBC on/off
(for VCDs)
1 2 3 4
– (left/right/up/down) selects an
item in the currently displayed
menu
SETUP
– accesses or clears the player’s
setup menu
T
– searches forward*
– moves to the next chapter or
track
SUBTITLE
– selects the language for
subtitles
ANGLE
– selects the DVD camera angle
ZOOM
– enlarges the video image
AUDIO
– selects the audio language or
format selector
– changes the Hybrid SA-CD
playback layer
ENTER/OK
– acknowledges the menu
selection
REPEAT
– repeats the chapter, track,
title ordisc
S
– searches backward*
– moves to the previous chapter
or track
A-B
– repeats a specific segment
STOP ( 9 )
– stops playback
PLAY ( B )
– starts playback
PAUSE ( ; )
– pauses playback temporarily
– frame-by-frame playback
* Press and hold button for about two seconds.
6
SHUFFLE
– plays tracks in random order
SCAN
– plays the first 6 seconds or
less of each track/chapter on
the disc
Preparation
Never make or change connections with
the power switched on.
• Depending on the equipment you wish
to connect, there are various ways you
could connect this unit. Possible
connections are shown in the following
drawings.
• Please refer to the manuals of other
equipment as necessary to make the
best connections.
• Do not connect this unit via your VCR.
The video quality could be distorted by
the copy protection system.
• Do not connect this unit’s audio out
jack to the phono in jack of your audio
system.
Note:
– If the audio format of the digital output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all. Make
sure to select the appropriate audio format
at menu screen included on the disc.
Pressing AUDIO once or more may change
not only audio languages but also audio
formats, and the selected format appears
for several seconds on the status window.
– SA-CD audio signals are not output from
the DIGITAL OUT jacks.
– If you wish to enjoy Dolby Digital, DTS, and
MPEG format, you must connect this player
to an AV receiver that supports these
formats.
Digital Connections
This unit has COAXIAL and OPTICAL
digital out jacks. Connect one or both of
them to your AV receiver equipped with
Dolby digital, DTS, or MPEG decoder
using a commercially available cable.
O
C
COAXIAL
IN
AV receiver
OPTICAL
IN
Subwoofer
Left front
speaker
Left surround
speaker
Center
speaker
Surround
back speaker
Right front
speaker
Right surround
speaker
You will need to set this unit’s digital
output to ALL (see page 26
“DIGITAL OUTPUT”).
7
English
General Notes on connections
Preparation
MIXED 2CH jacks
Analog Connections
This player has two types of analog output
jacks.
6ch discrete jacks
To reproduce multi-channel Super Audio
CD and DVD-Audio, connect these jacks
to your AV receiver’s multi channel input
jacks using commercially available audio
pin cables.
FRONT
R
L
CENTER
SUBWOOFER
SURROUND
R
L
AV receiver
Subwoofer
Left front
speaker
Left surround
speaker
8
Center
speaker
Surround
back speaker
Right front
speaker
Right surround
speaker
Use the audio/video cable supplied with
this player to connect the L (left) and R
(right) jacks to the corresponding input
jacks of your audio component, such as a
stereo amplifier. You can connect a
subwoofer to the SUBWOOFER jack.
Preparation
If your AV receiver has video output jacks,
connect your receiver (and then to your
TV) so that you can use one TV for several
different video sources (LD, VCR, etc.) by
simply switching the input source selector
of your receiver.
The player has four types of video output
jacks. Use one of them in accordance with
the input jacks of the equipment to be
connected.
S-Video terminal <A>
English
Video Connections
S (separate) video connection achieves a
clearer picture than composite video
connection by separating color and
luminance when transmitting signals. Use
commercially available S-video cable.
Receiver (and TV) with S-video input is
required.
Composite Video terminal <B>
Use the supplied video pin cable when
connecting the player to an AV receiver.
Component Video terminal <C>
Video pin
cable
<A>
V
<B>
<C>
S
Y
S VIDEO
INPUT
VIDEO
PBCB
PRCR
COMPONENT
VIDEO IN
AV receiver
VIDEO
OUT
COMPONENT
VIDEO OUT
S VIDEO
OUT
VIDEO
IN
COMPONENT
VIDEO IN
S VIDEO
IN
<D>
Component video connection achieves
high fidelity in reproducing colors (better
performance than S-video connection),
separating video signal into luminance (Y,
terminal color-coded as green), and color
difference (Pb, blue/Pr, red). Use
commercially available coaxial cables.
Receiver (and TV) with component input is
required. Observe the color of each jack
when connecting. If your receiver does not
have component output jacks, connecting
the player’s component output directly to
your TV’s component input can reproduce
better video image.
Note:
– You need to set this unit’s component
output to YUV (see page 29 “Switching the
YUV/RGB”).
SCART Connection <D>
If your TV has only terminal for video
input, and you want to connect it directly
to this unit, you can use this unit’s SCART
output jack.
Note:
– Ensure that the “TV” indication on SCART
cable is connected to the TV set and “DVD”
indication on SCART cable is connected to
this unit.
9
Getting Started
Step1: Inserting batteries
into the Remote Control
3
1
2
1 Open the battery compartment.
2 Insert the supplied two batteries type R06
or AA, following the indications (+ –)
inside the compartment.
3 Close the cover.
Using the remote control
Remote control
sensor
Point the remote control
at the sensor, within
approximately 6 m
(20 feet) of the unit.
30°
Step2: Turning on the power
1 Connect the AC power cord to the power
outlet.
2 Turn on the TV and your AV receiver.
3 Select the appropriate input source at the
AV receiver that was used to connect to
this unit. Refer to the equipment owner’s
manual for details.
4 Turn this unit on.
5 Set the TV to the correct Video IN channel
(eg. EXT1, EXT2, AV1, AV2, AUDIO/
VIDEO, etc. Refer to your TV owner’s
manual for details).
➜ The front display lights up and the
default screen appears on the TV.
Step3: Selecting the color
system that corresponds to
your TV
This DVD Player is compatible with both
NTSC and PAL. Select the color system
that matches your TV.
30°
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
COMPONENT
Handling the remote control
• Do not spill water or other liquids on
the remote control.
• Do not drop the remote control.
• Do not leave or store the remote
control in the following types of
conditions:
– high humidity such as near a bath
– high temperature such as near a heater
or stove
– extremely low temperature
– dusty places
10
PAL
NTSC
MULTI
1 Press SETUP.
2 Press 2 repeatedly to select [VIDEO
SETUP PAGE].
3 Press 34 to highlight [TV TYPE], then
press 2.
Getting Started
Notes:
– Before changing the current TV Standard
setting, ensure that your TV supports the
‘selected TV Type’ system.
– If there is not a proper picture on your TV,
wait for 15 seconds for auto recover.
CHANGING PAL TO NTSC
1. ENSURE THAT YOUR TV SYSTEM SUPPORTS
NTSC STANDARD.
2. IF THERE IS A DISTORTED PICTURE
DISPLAYED ON THE TV, WAIT 15 SECONDS
FOR AUTO RECOVER.
OK
TIPS:
Cancel
Step4: Setting language
preference
You can select your own preferred
language settings.This DVD Player will
automatically switch to the language for
you whenever you load a disc. If the
language selected is not available on the
disc, the disc’s default language will be used
instead. The OSD language in the system
menu will remain once selected.
Setting the OSD Language
GENERAL SETUP PAGE
DVD-AUDIO
DISC LOCK
DISPLAY DIM
PROGRAM
OSD LANGUAGE
SCREEN SAVER
SLEEP
DIVX(R) VOD CODE
ENGLISH
DANSK
DEUTSCH
ESPAÑOL
FRANÇAIS
ITALIANO
NEDERLANDS
NORSK
1 Press SETUP.
2 Press 1 2 to select [GENERAL SETUP
PAGE].
3 Press 34 to highlight [OSD LANGUAGE],
then press 2.
4 Press 34 to select a language and press
ENTER/OK.
To return to the previous menu, press 1.
To remove the menu, press SETUP.
11
English
4 Press 34 to highlight one of the options
below:
PAL
Select this if the connected TV is PAL
system. It will change the video signal of an
NTSC disc and output in PAL format.
NTSC
Select this if the connected TV is NTSC
system. It will change the video signal of a
PAL disc and output in NTSC format.
MULTI
Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
5 Select an item and press ENTER/OK.
Getting Started
Setting the Audio, Subtitle and
Disc menu language
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
VR LIST
PASSWORD
ENGLISH
CHINESE (SIMP)
FRENCH
SPANISH
PORTUGUESE
POLISH
ITALIAN
TURKISH
1 Press STOP ( 9 ) twice, then press
SETUP.
2 Press 2 repeatedly to select
[PREFERENCE PAGE].
3 Press 34 to highlight one of the options
below at a time, then press 2.
– ‘AUDIO’ (disc’s soundtrack)
– ‘SUBTITLE’ (disc’s subtitles)
– ‘DISC MENU’ (disc’s menu)
4 Press 34 to select a language and press
ENTER/OK.
Step 5: Setting Speaker
Channels
You can adjust the delay times (for center
and surround speakers only) and the
volume level for individual speakers. These
adjustments let you optimize the sound of
your system to best suit your surroundings
and setup.
IMPORTANT!
Speaker settings are only available
for multi-channel audio output.
1 Press SETUP.
2 Press 2 repeatedly to select [AUDIO
SETUP PAGE].
3 Press 34 to highlight [SPEAKER SETUP],
then press 2.
If the language you want is not in the
list, then select [OTHERS],
then use the numeric buttons on the
remote to enter the 4-digit language code
(see page 33 “Language Codes”) and press
ENTER/OK.
5 Repeat steps 3–4 for other options
settings.
4 Enter a submenu by pressing 2.
5 Press 34 to highlight one of the options
below, then press 2.
TIPS:
12
To return to the previous menu, press 1.
To remove the menu, press SETUP.
Getting Started
[SUBWOOFER]
ON
Select when a subwoofer is connected.
OFF
Select when no subwoofer is connected.
[SPEAKERS VOLUME]
Volume level setting for individual
speakers (–6 dB ~ +6 dB).
[SPEAKERS DELAY]
Delay time settings in relation to the
listening position/distance for center and
surround speakers (0 MS~15 MS).
SPEAKERS DELAY SETUP
CENTER
0 MS
SURROUND L
SURROUND R
0 MS
0 MS
6 Press 1 2 to adjust the setting that best
suits your surround sound needs.
7 Press ENTER/OK to confirm.
Notes:
– Use a longer delay time setting when the
surround speakers are closer to the listener
than the front speakers.
– A test tone will be automatically generated
to help you judge the sound level of each
speaker.
SPEAKERS VOLUME SETUP
FRONT LEFT
FRONT RIGHT
0dB
0dB
CENTER
SUBWOOFER
0dB
0dB
SURROUND L
SURROUND R
0dB
0dB
TIPS:
To return to the previous menu, press 1.
To remove the menu, press SETUP.
13
English
[FRONT SPEAKER, CENTER
SPEAKER, SURROUND SP]
OFF
(only for CENTER and SURROUND
speakers)
Select when no speakers are connected.
LARGE
Select if the connected speakers can
reproduce low frequency signals below
120 Hz.
SMALL
Select if the connected speakers cannot
reproduce low frequency signals below
120 Hz.
Disc Operations
IMPORTANT!
– If the inhibit icon ( or X) appears
on the TV screen when a button is
pressed, it means the function is
not available on the current disc or
at the current time.
– Depending on the DVD or VIDEO
CD, some operations may be
different or restricted.
– Do not push on the disc tray or put
any objects other than disc on the
disc tray. Doing so may cause the
disc player malfunction.
Basic Playback
1 Press STANDBY/ON on the front panel
to turn on the DVD player.
2 Press OPEN/CLOSE / on the front
panel to open disc loading tray.
3 Place the chosen disc in the tray, with the
label facing up.
4 Press OPEN/CLOSE / again to close
the tray.
➜ After recognizing this disc, the player
begins to play back automatically.
➜ If you press PLAY ( B ) when the tray
is open, this unit closes the tray and
starts playback.
General Operation
Unless otherwise stated, all operations
described are based on Remote Control
use.
Pausing playback
1 During playback, press PAUSE ( ; ).
➜ Playback will pause and sound will be
muted.
2 Press PAUSE ( ; ) again to select the
next picture frame.
3 To resume normal playback, press
PLAY ( B ).
Selecting track/chapter
• Press S / T or use the numeric
buttons to key in a track/chapter
number.
➜ If repeat mode is active, pressing S /
T will replay the same track/chapter.
Searching backward/forward
• Press and hold S / T, then press
PLAY ( B ) to resume normal
playback.
➜ While searching, pressing S / T
again will decrease/increase the search
speed.
Stopping playback
• Press STOP ( 9 ).
TIPS:
14
The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the discs.
Disc Operations
Repeat
• While playing a disc, press REPEAT
continuously to choose a ‘Play Mode’.
DVD-V/DVD-A
➔ RPT ONE (repeat chapter)
➔ RPT TT/GRP (repeat title/group)
➔ RPT ALL (repeat disc)
➔ RPT OFF (repeat off)
VCD/SVCD/CD
➔ RPT ONE (repeat track)
➔ RPT ALL (repeat disc)
➔ RPT OFF (repeat off)
MP3/DivX/SA-CD
➔ RPT ONE (repeat track)
➔ RPT FLD (repeat folder)
➔ RPT OFF (repeat off)
Note:
– For VCD, repeat playback is not possible if
the PBC mode is switched on.
Repeating a section within a
chapter/track
1 While playing a disc, press A-B at your
chosen starting point.
2 Press A-B again at your chosen end point.
➜ The section A and B can be set only
within the same chapter/track.
➜ The section will now repeat
continuously.
Shuffle
This function shuffles the playing order of
chapters or tracks within a title/group/
album (if the title/group/album has more
than one chapter or track) in random
order.
1 Press SHUFFLE during playback.
➜ SHUFFLE appears on the screen for
about two seconds.
2 To return to normal playback, press
SHUFFLE again.
Note:
– For SA-CD, this function works in the
currently selected area only.
Operations for video playback
(DVD/VCD/SVCD)
Using the Disc Menu
Depending on the disc, a menu may appear
on the TV screen once you load in the disc.
To select a playback feature or item
• Use 1 234 or numeric buttons on
the remote, then press ENTER/OK to
start playback.
To access or remove the menu
• Press MENU on the remote.
3 To exit the sequence, press A-B.
TIPS:
The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the discs.
15
English
Selecting various repeat/shuffle
functions
Disc Operations
Zooming in
This function allows you to enlarge the
picture on the TV screen and to pan
through the enlarged picture.
1 During playback, press ZOOM repeatedly
to display the picture with different scales.
➜ Use 1 234 to pan through the
enlarged picture.
➜ Playback will continue.
2 Press ZOOM repeatedly to return to the
original size.
Resuming playback from the last
stopped point
Resume playback of the last 10 discs is
possible, even if the disc was ejected or the
power switched off.
1 Load one of the last 10 discs.
➜ “LOADING” appears.
2 Press PLAY ( B ) while the
“LOADING” message is displayed.
➜ The disc will be played back from the
last point.
To cancel resume mode
• In stop mode, press STOP ( 9 ) again.
On-Screen Display (OSD)
OSD menu shows the disc playback
information (for example, title or chapter
number, elapsed playing time, audio/
subtitle language), a number of operations
can be done without interrupting disc
playback.
1 During playback, press ON SCREEN.
➜ A list of available disc information
appears on the TV screen.
TIPS:
16
DVD
MENU
TITLE
CHAPTER
AUDIO
SUBTITLE
02/14
02/14
5.1CH
ENG
BITRATE
VCD/SVCD
MENU
TRACK
DISC TIME
TRACK TIME
REPEAT
02/14
0:49:17
0:03:43
OFF
BITRATE
2 Press 34 to view the information and
press ENTER/OK to access.
3 Use the numeric buttons to input the
number/time or press 34 to make the
selection, then press ENTER/OK to
confirm.
➜ Playback will change to the chosen time
or to the selected title/chapter/track.
Title/Chapter/Track selection (DVD/
VCD)
1 Press 34 to select [TITLE] or
[CHAPTER] (DVD) or [TRACK] (VCD).
2 Press ENTER/OK.
3 Select a title, chapter or track number
using the numeric buttons.
The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the discs.
Disc Operations
2 Press ENTER/OK.
3 Enter hours, minutes and seconds from left
to right using the numeric buttons. (e.g.
0:34:27)
Audio/Subtitle/Angle (DVD discs)
You can change [AUDIO], [SUBTITLE] or
[ANGLE] if it is available on the disc you
are playing.
1 Press 34 to select [AUDIO], [SUBTITLE]
or [ANGLE].
2 Press ENTER/OK.
3 For Audio and Subtitle,
Press 34 to highlight your selection and
press ENTER/OK.
OR
For Angle,
Select an angle using the numeric
buttons.
Special DVD Features
English
Time Search (DVD/VCD)
1 Press 34 to select [TT TIME] or [CH
TIME] (DVD) or [TRACK TIME] or [DISC
TIME] (VCD).
➜ [TT TIME] refers to the total time of the
current title, and the [CH TIME] refers
to the total time of the current chapter.
Playing a Title
1 Press MENU.
➜ The disc title menu appears on the TV
screen.
2 Use 1 234 or numeric buttons to
select a play option.
3 Press ENTER/OK to confirm.
Camera Angle
• Press ANGLE repeatedly to select
different desired angle.
Audio
Changing the Audio Language and/or
format
• Press AUDIO repeatedly to select
different audio languages.
Subtitles
• Press SUBTITLE repeatedly to select
different subtitle languages.
Repeat/Time Display (DVD/VCD)
1 Press 34 to select [REPEAT] or [TIME
DISP.].
2 Press ENTER/OK.
3 Press 34 to highlight your selection and
press ENTER/OK.
Time display (CD)
Each time you press ON SCREEN, the
time display changes as follows;
TIPS:
TOTAL ELAPSED
TOTAL REMAIN
SINGLE REMAIN
SINGLE ELAPSED
The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the discs.
17
Disc Operations
Special VCD & SVCD Features
Playback Control (PBC)
For VCD with Playback Control
(PBC) feature (version 2.0 only)
• Press MENU to toggle between ‘PBC
ON’ and ‘PBC OFF’.
➜ If you select ‘PBC ON’, the disc menu (if
available) will appear on the TV.
➜ Use the S / T or the numeric
buttons to select a play option.
• During playback, pressing TOP
MENU/RETURN will return to the
menu screen (if PBC is on).
TRACK DIGEST
This function will minimize the picture of
every track in order to display every six of
these tracks on the screen to help you
know the content of every track on the
disc.
DISC INTERVAL
This function is used to divide a disc into
six parts by regular intervals and display
them on one page to preview the whole
disc.
TRACK INTERVAL
This function is used to divide a single track
into six parts by regular intervals and
display them on one page to help you
preview the selected track.
If you want to skip the index menu
and playback directly from the
beginning,
• Press MENU on the remote control to
switch to PBC off.
Preview Function
1 Press SCAN.
2 Press 34 to highlight [TRACK DIGEST],
[DISC INTERVAL] or [TRACK
INTERVAL].
3 Press ENTER/OK to open one option.
SELECT DIGEST TYPE:
TRACK DIGEST
DISC INTERVAL
TRACK INTERVAL
(example for 6 thumbnail pictures display)
4 Use 1 234 to select a track or use
numeric buttons to input the selected
track number next to [SELECT].
5 Press S / T to open the previous or
next page.
6 Press ENTER/OK to confirm.
To quit preview function
• Use 1 234 to highlight [EXIT] and
press ENTER/OK to confirm.
To return to preview menu
• Use 1 234 to highlight [MENU] and
press ENTER/OK to confirm.
For CD
• At stop mode, press SCAN on the
remote control.
➜ Each track will be played for a few
seconds.
TIPS:
18
The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the discs.
Disc Operations
DVD-Audio has developed for the sole
purpose of creating high quality pure
sound with Linear PCM and Packed PCM
(lossless coding) in up to six audiochannels. Sampling frequencies of 192 kHz/
24 bits are supported.
Moreover, many DVD-Audio discs offer
slide show and page turn capabilities.
• When you play a down mix prohibited
disc, D.MIX indicator turns off. Multichannel tracks will play regardless of the
analog output settings in Setup Menu.
The MIXED 2CH jacks output the front
L and R signals only.
Changing pages
Some DVD-Audio discs contain
information pages for photo galleries,
artist biographies, lyrics, etc.
Each time you press PAGE on the remote
control, the display moves to the next
page.
TIPS:
Playing bonus groups
Some discs contain bonus groups that
require a four-digit password to gain
access. In this case, consult the disc jacket
and other packaging for information.
1 Press STOP ( 9 ) twice to stop playback,
then press ON SCREEN .
➜ The group and track list is displayed on
the TV screen.
2 Press 34 to select a bonus group, then
press ENTER/OK.
3 Enter a four-digit password using the
numeric buttons, then press ENTER/
OK.
4 Press 34 to select a track, then press
ENTER/OK.
DVD-Video mode
Some DVD-Audio discs include DVDVideo contents that can be played on
conventional DVD-Video players (see
“Selecting DVD-Audio/Video mode” on
page 23).
The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the discs.
19
English
DVD-Audio Features
Disc Operations
Playing a disc
SA-CD (Super Audio CD)
The SA-CD standard is based on Direct
Stream Digital (DSD) technology. This
new direct-stream digital format
comprises a 1-bit system that has a digital
sampling frequency 64 times higher than
that of conventional audio CD.
There are three types of SA-CD discs:
single layer, dual layer and hybrid. Each
type contains a High Density (HD) layer
that has two separate data areas: a High
Quality Stereo area and a High Quality
Multi-channel area. Recorded information
can be contained in both areas.
– A single layer disc has one HD layer.
– A dual layer disc has two HD layers.
Twice the information of a single layer
disk can be stored due to the second
HD layer.
– A hybrid disc has one HD layer and one
standard CD layer, making it playable on
standard CD players.
SA-CD Disc Types
Dual layer disc
Single layer disc
HD layer
HD layer
Hybrid layer
disc
Hybrid SA-CD-Disc
2
3
TIPS:
20
2 To stop playback, press STOP ( 9 ).
Note:
– You cannot change the Analog output
setting during SA-CD playback
Changing the SA-CD playback
area and layer
1
2
3
4
5
You can change the SA-CD playback area
at any time during playback. Press
SOUND MODE to switch between the
multi-channel and stereo areas in the HD
layer.
OR
Press 1.
Highlight the folder using 34.
Press ENTER/OK.
Highlight a track using 34.
Press ENTER/OK to begin playback.
CD layer
HD layer
1
1 Insert the disc and close the tray.
Playback starts automatically.
➜ The TV screen will display the current
playing status and track list.
➜ Playback will stop automatically at the
end of the disc.
For hybrid SA-CD, the player will always
play the HD layer first. Press AUDIO
while playback is stopped to switch
between the HD and CD layers.
CD layer that plays on any CD
player
• The SA-CD indicator lights only when
the HD layer is selected.
High Density layer containing:
- High Quality DSD Stereo
Note:
– SA-CD Text is not supported.
- High Quality DSD Multichannel
The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the discs.
Disc Operations
General Operation
1 Load a disc.
➜ The disc reading time may exceed 30
seconds due to the complexity of the
directory/file configuration.
➜ The data disc menu appears on the TV
screen.
2 Playback will start automatically, if not
press PLAY ( B ).
00:00 00:00
001/020
Favorite
MP3
Piano
MP3
Cello
MP3
Jazz
MP3
Live
Selecting a folder and track/file
1 Press 34 to select the folder and press
ENTER/OK to open the folder.
2 Press 34 to select a track/file.
3 Press ENTER/OK to confirm.
➜ Playback will start from the selected file
to the end of the folder.
Repeat
When the Picture CD/MP3 CD menu is
shown on the screen;
• Press REPEAT continuously to access
different ‘Play Mode’.
➜ FOLDER: files will be played back once.
➜ REPEAT ONE: one file will be played
repeatedly.
➜ REPEAT FOLDER: all files in one folder
will be played repeatedly.
During playback, you can;
• Press S / T to select another
track/file in the current folder.
• Press PAUSE ( ; ) to pause playback.
Notes:
– It may not be possible to play certain MP3/
JPEG/DivX/MPEG-4 discs due to the
configuration and characteristics of the disc
or condition of the recording.
– Make a folder with less than 500 files. It
may not play properly if there are more
than 500 files.
– It may not be possible to play discs with
more than 500 files if you have selected
“WITHOUT MENU” in [MP3/JPEG NAV]
(see page 30 “MP3/JPEG Menu”).
TIPS:
The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the discs.
21
English
Playing MP3/DivX/JPEG/Kodak
Picture CD
Disc Operations
Special picture disc features
1 Load a Picture disc (Kodak Picture CD,
JPEG).
➜ For Kodak disc, the slide show will
begin.
➜ For JPEG disc, the picture menu appears
on the TV screen.
2 Press PLAY ( B ) to start the slide-show
playback.
Preview Function (JPEG)
This function shows the content of the
current folder or the whole disc.
1 Press STOP ( 9 ) during playback.
➜ 12 thumbnail pictures will appear on the
TV screen.
Zoom picture
1 During playback, press ZOOM repeatedly
to display the picture with different scales.
2 Use 1 234 to view the zoomed picture.
Playback with multi-angles
• During playback, press 1 234 to
rotate the picture on the TV screen.
1: rotate the picture anti-clockwise
2: rotate the picture clockwise
3: flip the picture vertically
4: flip the picture horizontally
Scan Effect
• Press ANGLE repeatedly to choose
different scan effect.
➜ Various of scan effect appears on the
top left hand corner on the TV screen.
Playing MP3 music and JPEG
picture simultaneously
1 Load a disc that contains music and
pictures.
➜ The disc menu appears on the TV
screen.
2 Press S / T to display the other
pictures on the previous/next page.
3 Use 1 234 to highlight one of the picture
and press ENTER/OK to start playback
OR
Move the cursor to highlight
on the
bottom of the page to start playback from
the first picture on the current page.
4 Press MENU to return to Picture CD
menu.
TIPS:
22
2 Select an MP3 track.
3 During MP3 music playback, select a
picture from the TV screen and press
PLAY ( B ).
➜ The picture files will be played back one
after another until end of the folder.
4 To quit simultaneous playback, press
MENU followed by STOP ( 9 ).
Note:
– Some files on Kodak or JPEG disc may be
distorted during playback due to the
configuration and characteristics of the disc.
The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the discs.
Setup Menu
General Setup Menu
1 Press SETUP.
2 Press 1 2 to select ‘General Setup’ icon.
3 Press ENTER/OK to confirm.
GENERAL SETUP PAGE
DVD-AUDIO
DISC LOCK
DISPLAY DIM
PROGRAM
OSD LANGUAGE
SCREEN SAVER
SLEEP
DIVX(R) VOD CODE
Selecting DVD-Audio/Video
mode
1 In ‘GENERAL SETUP PAGE’, press 34 to
highlight [DVD-AUDIO], then press 2.
DVD-AUDIO MODE
Select this for normal playback.
DVD-VIDEO MODE
Select this to playback the contents of the
DVD-Video.
2 Press 34 to select a setting, then press
ENTER/OK to confirm your selection.
Notes:
– The DVD-AUDIO indicator lights up when a
DVD-Audio disc is playing.
– When you select DVD-VIDEO MODE, the
DVD-AUDIO indicator goes out.
TIPS:
Locking/Unlocking the disc for
viewing
Not all discs are rated or coded by the disc
maker. You can prevent a specific disc
from playing by locking the disc. Up to 40
discs can be locked.
1 In ‘GENERAL SETUP PAGE’, press 34 to
highlight [DISC LOCK], then press 2.
LOCK
Select this to lock the playback of the
current disc. Subsequent access to a
locked disc requires six-digit password.
The default password is ‘000 000’ (see
page 32 “Changing the Password”).
UNLOCK
Select this to unlock the disc and allow
future playback.
2 Press 34 to select a setting, then press
ENTER/OK to confirm your selection.
Dimming player’s front panel
display
You can select different levels of
brightness for the front panel display.
1 In ‘GENERAL SETUP PAGE’, press 34 to
highlight [DISPLAY DIM], then press 2.
100%
Select this for full brightness.
70%
Select this for medium brightness.
40%
Select this for dimming the display.
2 Press 34 to select a setting, then press
ENTER/OK to confirm your selection.
To return to the previous menu, press 1.
To remove the menu, press SETUP.
23
English
The setup is carried out via the TV,
enabling you to customize the DVD Player
to suit your particular requirements.
Setup Menu
Programming disc tracks (not for
Picture CD/MP3)
You can play the contents of the disc in the
order you want by programming the tracks
to be played. Up to 20 tracks can be
stored.
1 In ‘GENERAL SETUP PAGE’, press 34 to
highlight [PROGRAM], then press 2 to
select [INPUT MENU].
2 Press ENTER/OK to confirm.
To input your favorite tracks/chapter
3 Use the numeric buttons to enter a valid
track/chapter number.
1 04
6 __
2 10
7 __
3 11
8 __
4 __
9 __
5 __
10 __
4 Use 1 234 to move the cursor to the
next position.
➜ If the track number is more than ten,
press T to open the next page and
proceed with programming or,
➜ Use 1 234 to highlight [NEXT] on the
program menu, then press ENTER/
OK.
5 Repeat steps 3–4 to input another track/
chapter number.
If you want to remove a track
6 Use 1 234 to move the cursor to the
track you want to remove.
7 Press ENTER/OK to remove this track
from the program menu.
TIPS:
24
To return to the previous menu, press 1.
To remove the menu, press SETUP.
To start program playback
8 Use 1 234 to highlight [START] on the
program menu, then press ENTER/OK.
➜ Playback will start with the selected
tracks under the programmed
sequence.
To exit program playback
9 Use 1 234 to highlight [EXIT] on the
program menu, then press ENTER/OK.
OSD Language
This menu contains various language
options for display language on the screen.
For details, see page 11.
Screen Saver
This function is used to turn the screen
saver on or off.
1 In ‘GENERAL SETUP PAGE’, press 34 to
highlight [SCREEN SAVER], then press 2.
ON
Select this if you wish to turn off the TV
screen when disc playback is stopped or
paused for more than 15 minutes.
OFF
Select this to disable the screen saver
function.
2 Press 34 to select a setting, then press
ENTER/OK to confirm your selection.
Setup Menu
This feature automatically sets the DVD
player in standby mode after the amount of
time you have set.
1 In ‘GENERAL SETUP PAGE’, press 34 to
highlight [SLEEP], then press 2.
2 Press 34 to select a setting.
➜ You can select from 15, 30, 45 and 60
minutes. Select [OFF] to cancel the
sleep timer function.
3 Press ENTER/OK to confirm your
selection.
Audio Setup Menu
English
Sleep Timer
1 Press SETUP.
2 Press 1 2 to select ‘Audio Setup’ icon.
3 Press ENTER/OK to confirm.
AUDIO SETUP PAGE
ANALOG OUTPUT
DIGITAL AUDIO
SPEAKER SETUP
CD UPSAMPLING
NIGHT MODE
DivX® VOD registration code
Yamaha provides you with a DivX® VOD
(Video On Demand) registration code that
allows you to rent and purchase videos
using the DivX® VOD service.
For more information, visit at
www.divx.com/vod.
1 In ‘GENERAL SETUP PAGE’, press 34 to
highlight [DIVX(R) VOD CODE], then
press 2.
➜ The registration code will appear.
2 Press ENTER/OK to exit.
3 Use the registration code to purchase or
rent the videos from DivX® VOD service
at www.divx.com/vod. Follow the
instructions and download the video onto
a CD-R for playback on this DVD player.
Notes:
– All the downloaded videos from DivX®
VOD can only be played back on this DVD
player.
– Time search feature is not available during
DivX movie playback.
Setting the analog output
Set Analog Output to match your DVD
Player’s playback capability.
1 In ‘AUDIO SETUP PAGE’, press 34 to
highlight [ANALOG OUTPUT], then press 2.
STEREO
Select this to change the channel output to
stereo, which only delivers sound from the
two front speakers and subwoofer.
VIRTUAL SURR
Select this to reproduce the surround
channels virtually.
MULTI-CHANNEL
Select this setting when using a multi-channel
audio/(video) receiver with 6 channel inputs. In
this mode, the player performs DTS decoding or
Dolby Digital 5.1-channel decoding when
applicable, and Dolby Pro Logic decoding on
DVD-Video, Video-CD and Audio CD discs with
2-channel sound tracks. No Dolby Pro Logic
decoding is done with Super Audio CD discs.
2 Press 34 to select a setting, then press
ENTER/OK to confirm your selection.
Note:
– You can change the analog output after the
disc is loaded.
TIPS:
To return to the previous menu, press 1.
To remove the menu, press SETUP.
25
Setup Menu
Setting the Digital output
1
2
3
4
The options included in Digital Audio are:
‘Digital Output’ and ‘LPCM Output’.
In ‘AUDIO SETUP PAGE’, press 34 to
highlight [DIGITAL AUDIO], then press 2.
Press the 34 to highlight an option.
Enter its submenu by pressing 2.
Move the cursor by pressing the 34 to
highlight the selected item.
DIGITAL OUTPUT
Set the Digital output according to your
optional audio equipment connection.
OFF
Turn off the digital output.
ALL
If you have connected your DIGITAL
AUDIO OUT to a multi-channel decoder/
receiver.
PCM ONLY
Only if your receiver is not capable of
decoding multi-channel audio.
LPCM OUTPUT
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical, etc.,
you may need to adjust ‘LPCM Output’.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
48KHz
Playback a disc recorded at the sampling
y iavailapablen a di)he
26
Setup Menu
In this mode, the high volume outputs are
softened and low volume outputs are
brought upward to an audible level. It is
useful for watching your favorite action
movie without disturbing others at night.
1 In ‘AUDIO SETUP PAGE’, press 34 to
highlight [NIGHT MODE], then press 2.
ON
Select this to level out the volume. This
feature is only available for movies with
Dolby Digital mode.
OFF
Select this when you want to enjoy the
surround sound with its full dynamic range.
2 Press 34 to select a setting, then press
ENTER/OK to confirm your selection.
Video Setup Menu
1 Press SETUP.
2 Press 1 2 to select ‘Video Setup’ icon.
3 Press ENTER/OK to confirm.
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
COMPONENT
Setting the TV Display
Set the aspect ratio of the DVD Player
according to the TV you have connected.
The format you select must be available on
the disc. If it is not, the setting for TV
display will not affect the picture during
playback.
1 In ‘VIDEO SETUP PAGE’, press 34 to
highlight [TV DISPLAY], then press 2.
2 Press 34 to highlight one of the options
below:
4:3 PAN SCAN
Select this if you have
a normal TV and want
both sides of the
picture to be trimmed
or formatted to fit
your TV screen.
4:3 LETTER BOX
Select this if you have a
normal TV. In this case, a
wide picture with black
bands on the upper and
lower portions of the TV screen will be
displayed.
16:9
Select this if you have
a widescreen TV.
3 Select an item and press ENTER/OK.
TV Type
This menu contains the options for
selecting the color system that matches
the connected TV. For details, see page 10.
TIPS:
To return to the previous menu, press 1.
To remove the menu, press SETUP.
27
English
Night Mode
Setup Menu
Progressive
This feature is only applicable if you have
connected this DVD Player to a
Progressive Scan TV through the Y Pb Pr
jacks (see page 9).
1 In ‘VIDEO SETUP PAGE’, press 34 to
highlight [PROGRESSIVE], then press 2.
OFF
To disable Progressive Scan function.
ON
To enable Progressive Scan function.
2 Press 34 to select a setting, then press
ENTER/OK to confirm your selection.
Notes on activating Progressive:
– Ensure that your TV has progressive
scan.
– Connect with YPbPr video cable.
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE. IN CASE OF 525
OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE
USER SWITCH THE CONNECTION TO THE
“STANDARD DEFINITION” OUTPUT. IF THERE
ARE QUESTIONS REGARDING OUR VIDEO
MONITOR COMPATIBILITY WITH THIS
MODEL 525P AND 625P DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE
CENTER.
This unit is compatible with the complete line of
YAMAHA products, including the projectors DPX1100, LPX-510 and the plasma monitor PDM4210/4210E.
TIPS:
28
To return to the previous menu, press 1.
To remove the menu, press SETUP.
Picture Setting
This DVD Player provides three
predefined sets of picture color settings
and one personal setting which you can
define yourself.
1 In ‘VIDEO SETUP PAGE’, press 34 to
highlight [PICTURE SETTING], then press
2.
STANDARD
Select this for standard picture setting.
BRIGHT
Select this will make the TV picture
brighter.
SOFT
Select this will make the TV picture softer.
PERSONAL
Select this to personalize your picture
color by adjusting the brightness, contrast,
tint and color (saturation).
2 Press 34 to select a setting, then press
ENTER/OK to confirm your selection.
3 If you select [PERSONAL], then proceed
to steps 4–7.
➜ The ‘PERSONAL PICTURE SETUP’
menu appears.
PERSONAL PICTURE SETUP
BRIGHTNESS
CONTRAST
TINT
COLOR
0
0
0
0
4 Press 34 to highlight one of the following
options.
Setup Menu
Switching the YUV/RGB
This setting allows you to toggle the
output of the video signal between RGB
(on SCART) and Y Pb Pr (YUV).
1 In ‘VIDEO SETUP PAGE’, press 34 to
highlight [COMPONENT], then press 2.
YUV
Select this for Y Pb Pr connection.
RGB
Select this for SCART connection.
2 Press 34 to select a setting, then press
ENTER/OK to confirm your selection.
TIPS:
Preference Setup Menu
1 Press STOP ( 9 ) twice to stop playback
(if any), then press SETUP.
2 Press 1 2 to select the ‘Preference Setup’
icon.
3 Press ENTER/OK to confirm.
Audio, Subtitle, Disc Menu
These menus contain various language
options for audio, subtitle and disc menu
which may be recorded on the DVD. For
details, see page 12.
Restricting playback by Parental
Control
Some DVDs may have a parental level
assigned to the complete disc or to certain
scenes on the disc. This feature lets you set
a playback limitation level.
The rating levels are from 1 to 8 and are
country dependent. You can prohibit the
playing of certain discs that are not suitable
for your children or have certain discs
played with alternative scenes.
To return to the previous menu, press 1.
To remove the menu, press SETUP.
29
English
BRIGHTNESS
Increase the value will brighten the picture
or vice versa. Choose zero (0) for average
setting.
CONTRAST
Increase the value will sharpen the picture
or vice versa. Choose zero (0) to balance
the contrast.
TINT
Increase the value will darken the picture
or vice versa. Choose zero (0) for average
setting.
COLOR
Increase the value will enhance the color in
your picture or vice versa. Choose zero
(0) to balance the color.
5 Press 1 2 to adjust the setting that best
suit your personal preference.
6 Repeat steps 4–5 for adjusting other color
features.
7 Press ENTER/OK to confirm.
Setup Menu
1 In ‘PREFERENCE PAGE’, press 34 to
highlight [PARENTAL], then press 2.
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
VR LIST
PASSWORD
1 KID SAFE
2G
3 PG
4 PG 13
5 PGR
6R
7 NC 17
8 ADULT
2 Press 34 to highlight a rating level for the
disc inserted and press ENTER/OK.
➜ To disable Parental controls and have all
Discs play, select [8 ADULT].
MP3/JPEG Menu
MP3/JPEG Navigator can be set only if the
disc is recorded with menu. It allows you
to select different display menus for easy
navigation.
1 In ‘PREFERENCE PAGE’, press 34 to
highlight [MP3/JPEG NAV], then press 2.
WITHOUT MENU
Select this to display all the files contained
in the MP3/Picture CD.
WITH MENU
Select this to display only the folder menu
of the MP3/Picture CD.
2 Press 34 to select a setting, then press
ENTER/OK to confirm your selection.
3 Use the numeric buttons to enter the
six-digit password (see page 32 “Changing
the Password”).
➜ DVDs that are rated above the level you
selected will not play unless you enter
your six-digit password.
Notes:
– VCD, SVCD, CD and SA-CD have no level
indication, so parental control function has
no effect on these types of discs. This
applies to most illegal DVD discs.
– Some DVDs are not encoded with a rating
though the movie rating may be printed on
the disc cover. The rating level feature does
not work for such discs.
PBC (Playback Control)
You can set the PBC to ON or OFF. This
feature is available only on Video CD 2.0
with playback control (PBC) feature. For
details, see page 18.
TIPS:
30
To return to the previous menu, press 1.
To remove the menu, press SETUP.
Playback of VR Format
1
2
3
4
There are two ways to play back a disc in
VR (Video Recording) format: ORIGINAL
and PLAY LIST. This feature is not available
with non-VR format discs.
In ‘PREFERENCE PAGE’, press 34 to
highlight [VR LIST].
Press 2. The following settings will appear:
ORIGINAL LIST
Select this to play the originally recorded
titles on the disc.
PLAY LIST
Select this to play the edited version of the
disc. This feature is only available when a
play list has been created.
Press 34 to highlight a setting.
Press ENTER/OK to confirm your
selection.
Setup Menu
Previewing VR format
7 During playback, press SCAN.
8 Press 34 to highlight either [TITLE
DIGEST] or [TITLE INTERVAL].
SELECT DIGEST TYPE:
TITLE DIGEST
TITLE INTERVAL
9 Press ENTER/OK to select the function.
TITLE DIGEST
This function will display thumbnail
pictures of titles on the screen. Up to six
thumbnail pictures per page will be
displayed.
➜ In ORIGINAL LIST mode, the originally
recorded titles on the disc will be
displayed.
➜ In PLAY LIST mode, every title in the
play list will be displayed.
English
To play back a disc in VR format
5 Press SETUP to close the setup menu.
6 Press PLAY. The setting you selected will
begin to play.
(example for 6 thumbnail pictures display)
10 Use 1 234 to select a title, or use the
numeric buttons to input the title
number next to [SELECT].
➜ Press S / T to access the
previous/next page.
11 Press ENTER/OK to confirm the
selection.
To quit preview function
• Use 1 234 to highlight [EXIT] and
press ENTER/OK to confirm.
To return to preview menu
• Use 1 234 to highlight [MENU] and
press ENTER/OK to confirm.
TITLE INTERVAL
This function will divide and display the
contents of each title being played back in
regular intervals, making it easy to preview
the recording. Up to six thumbnail pictures
per page will be displayed.
➜ If the title being played back is short, the
TITLE DIGEST function will be
performed instead.
TIPS:
To return to the previous menu, press 1.
To remove the menu, press SETUP.
31
Setup Menu
Changing the Password
The same password is used for both
Parental Control and Disc Lock. Enter
your six-digit password when prompted
on the screen. The default password is 000
000.
1 In ‘PREFERENCE PAGE’, press 34 to
highlight [PASSWORD], then press 2 to
select [CHANGE].
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
VR LIST
PASSWORD
CHANGE
2 Press ENTER/OK to enter the ‘Password
Change Page’.
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
OK
3 Use the numeric buttons to enter your
old six-digit password.
➜ When doing this for the first time, key
in ‘000 000’.
➜ If you forget your old six-digit
password, key in ‘000 000’.
4 Enter the new six-digit password.
5 Enter the new six-digit password a second
time to confirm.
6 Press ENTER/OK to confirm.
➜ The new six-digit password will now
take effect.
TIPS:
32
To return to the previous menu, press 1.
To remove the menu, press SETUP.
Restoring to original settings
Setting the DEFAULT function will reset all
options and your personal settings to the
factory defaults, except your password for
Parental Control and Disc Lock.
1 In ‘PREFERENCE PAGE’, press 34 to
highlight [DEFAULT], then press 2 to
select [RESET].
2 Press ENTER/OK to confirm.
➜ All settings will now reset to factory
defaults.
Language Codes
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Avestan
Aymara
Azerbaijani
Bashkir
Basque
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosnian
Breton
Bulgarian
Burmese
Castilian, Spanish
Catalan
Chamorro
Chechen
Chewa; Chichewa; Nyanja
Chichewa; Chewa; Nyanja
Chinese
Chuang; Zhuang
Church Slavic; Slavonic;
Church Slavonic; Church
Chuvash
Cornish
Corsican
Croatian
Czech
Danish
Dutch
Dzongkha
English
Esperanto
Estonian
Faroese
Fijian
Finnish
French
Frisian
Gaelic; Scottish Gaelic
Gallegan
Georgian
6566
6565
6570
8381
6577
6582
7289
6583
6569
6589
6590
6665
6985
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
7889
7889
9072
9065
6785
6785
6786
7587
6779
7282
6783
6865
7876
6890
6978
6979
6984
7079
7074
7073
7082
7089
7168
7176
7565
German
Gikuyu; Kikuyu
Greek,
Guarani
Gujarati
Hausa
Hebrew
Herero
Hindi
Hiri Motu
Hungarian
Icelandic
Ido
Indonesian
Interlingua (International)
Interlingue
Inuktitut
Inupiaq
Irish
Italian
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Khmer
Kikuyu; Gikuyu
Kinyarwanda
Kirghiz
Komi
Korean
Kuanyama; Kwanyama
Kurdish
Kwanyama; Kuanyama
Lao
Latin
Latvian
Letzeburgesch;
Limburgan; Limburger;
Limburger; Limburgan;
Limburgish; Limburger;
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Malay
Malayalam
Maltese
Manx
English
These pages can be used to select other languages.This does not affect the
options in “AUDIO”, “SUBTITLE” or “DISC MENU”.
6869
7573
6976
7178
7185
7265
7269
7290
7273
7279
7285
7383
7379
7368
7365
7369
7385
7375
7165
7384
7465
7486
7576
7578
7583
7575
7577
7573
8287
7589
7586
7579
7574
7585
7574
7679
7665
7686
7666
7673
7673
7673
7678
7684
7666
7775
7771
7783
7776
7784
7186
33
Language Codes
These pages can be used to select other languages.This does not affect the
options in “AUDIO”, “SUBTITLE” or “DISC MENU”.
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho, Navajo
Navajo; Navaho
Ndebele, North
Ndebele, South
Ndonga
Nepali
Northern Sami
North Ndebele
Norwegian
Norwegian Bokmål; Bokmål,
Norwegian Nynorsk;
Nyanja; Chichewa; Chewa
Nynorsk, Norwegian;
Occitan (post 1500); Proven
Old Bulgarian; Old Slavonic;
Old Church Slavonic; Old
Old Slavonic; Church
Oriya
Oromo
Ossetian; Ossetic
Ossetic; Ossetian
Pali
Panjabi
Persian
Polish
Portuguese
Provençal; Occitan (post)
Pushto
Quechua
Raeto-Romance
Romanian
Rundi
Russian
Samoan
Sango
Sanskrit
Sardinian
Scottish Gaelic; Gaelic
Serbian
Shona
Sindhi
Sinhalese
Slovak
Slovenian
Somali
34
7773
7782
7772
7779
7778
7865
7886
7886
7868
7882
7871
7869
8369
7868
7879
7866
7878
7889
7878
7967
6785
6785
6785
7982
7977
7983
7983
8073
8065
7065
8076
8084
7967
8083
8185
8277
8279
8278
8285
8377
8371
8365
8367
7168
8382
8378
8368
8373
8375
8376
8379
Sotho, Southem
South Ndebele
Spanish; Castilian
Sundanese
Swahili
Swati
Swedish
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Turkish
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zhuang; Chuang
Zulu
8384
7882
6983
8385
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9065
9085
Troubleshooting
Problem
Solution
No power
– Check if the AC power cord is properly connected.
– Press the STANDBY/ON on the front of the DVD system
to turn on the power.
No picture
– Refer to your TV’s manual for correct Video In selection.
Change the TV input until you see the DVD screen.
– Check if the TV is switched on.
– If you did not use Progressive Scan connections (using the Y
PB PR jacks on the DVD Player) and you do not have a
picture at the TV, please follow the steps below to turn off
Progressive Scan;
1. Press / (OPEN/CLOSE) to open the disc tray.
2. Press 1.
3. Press ANGLE to deactivate the Progressive.
➜ The DVD Player will reset itself to Component/Interlaced
video.
Distorted picture
– Sometimes a small amount of picture distortion may appear
depending on the disc being played back. This is not a
malfunction.
Completely distorted picture
or black/white picture with
DVD
– Make sure the disc is compatible with the DVD Player.
– Ensure that the DVD Player’s TV Type is set to match that
of the disc and your TV.
No sound or distorted sound
– Adjust the volume.
– Check that the speakers are connected correctly.
No audio at digital output
– Check the digital connections.
– Check if your receiver can decode MPEG-2 or DTS and if
not, please make sure the digital output is set to
PCM ONLY.
– Check if the audio format of the selected audio language
matches your receiver capabilities.
No sound and picture
– Check that the RGB/SCART cable is connected to the
correct device (See “Video Connections”).
35
English
Refer to the chart below when this unit does not function properly. If the
problem you are experiencing is not listed below or if the instruction below does
not help, set this unit to the standby mode, disconnect the power cord, and
contact the nearest authorized YAMAHA dealer or service center.
Troubleshooting
Problem
36
Solution
Disc can’t be played
– The CD-R/RW, DVD+R/RW, DVD-R/RW and DVD-RW
(VR format) must be finalized.
– Ensure the disc label is facing up.
– Check if the disc is defective by trying another disc.
– If you have recorded a Picture CD or MP3 CD yourself,
ensure that your disc contains at least 10 pictures or 5 MP3
tracks.
– Region code incorrect.
Picture freezes momentarily
during playback
– Check the disc for fingerprints/scratches and clean with a
soft cloth wiping from center to edge.
The player does not respond to
the Remote Control
– Aim the Remote Control directly at the sensor on the front
of the player.
– Reduce the distance to the player.
– Replace the batteries in the Remote Control.
– Re-insert the batteries with their polarities (+/– signs) as
indicated.
Buttons do not work
– To completely reset the player, unplug the AC cord from
the AC outlet for 5-10 seconds.
Player does not respond to
some operating commands
during playback
– Operations may not be permitted by the disc. Refer to the
instructions of the disc jacket.
DVD Player cannot read CDs/
DVDs
– Use a commonly available cleaning CD/DVD to clean the
lens before sending the DVD Player for repair.
Menu items cannot be selected
– Press STOP twice before selecting System Menu.
– Depending on the disc availability, some menu items cannot
be selected.
Unable to play DivX movies
– Check that the DivX file is encoded in ‘Home Theater’
mode with DivX 5.x encoder.
Unable to select Progressive
Scan on/off
– Check that the output of the video signal is switch to ‘YUV’.
No sound during DivX movies
playback
– The audio code may not be supported by the DVD player.
Glossary
Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal
vs. vertical ratio of conventional TVs. is 4:3, and
that of widescreens is 16:9.
AUDIO OUT Jacks: Jacks on the back of the
DVD System that send audio to another system
(TV, Stereo, etc.).
Bit Rate: The amount of data used to hold a
given length of music; measured in kilobits per
seconds, or kbps. Or, the speed at which you
record. Generally, the higher the bit rate, or the
higher the recording speed, the better the sound
quality. However, higher bit rates use more space
on a Disc.
Chapter: Sections of a picture or a music piece
on a DVD that are smaller than titles. A title is
composed of several chapters. Each chapter is
assigned a chapter number enabling you to locate
the chapter you want.
Component Video Out Jacks: Jacks on the
back of the DVD System that send high-quality
video to a TV that has Component Video In jacks
(R/G/B,Y/Pb/Pr, etc.).
Disc menu: A screen display prepared for
allowing selection of images, sounds, subtitles,
multi-angles, etc. recorded on a DVD.
Digital: Sound that has been converted into
numerical values. Digital sound is available when
you use the DIGITAL AUDIO OUT COAXIAL
or OPTICAL jacks. These jacks send audio
through multiple channels, instead of just two
channels as analog does.
DivX 3.11/4x/5x: The DivX code is a patent
pending, MPEG-4 based video compression technology, developed by DivXNetworks, Inc., that
can shrink digital video to sizes small enough to
be transported over the internet, while maintaining high visual quality.
Dolby Digital: A surround sound system developed by Dolby Laboratories containing up to six
channels of digital audio (front left and right, surround left and right, center and subwoofer).
English
Analog: Sound that has not been turned into
numbers. Analog sound varies, while digital
sound has specific numerical values. These jacks
send audio through two channels, the left and
right.
DTS: Digital Theatre Systems. This is a surround
sound system, but it is different from Dolby Digital. The formats were developed by different
companies.
JPEG: A very common digital still picture format. A still-picture data compression system proposed by the Joint Photographic Expert Group,
which features small decrease in image quality in
spite of its high compression ratio.
MP3: A file format with a sound data compression system. “MP3” is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer 3. By using MP3 format, one CD-R or CDRW can contain about 10 times as much data
volume as a regular CD can.
Multichannel: DVD is specified to have each
sound track constitute one sound field. Multichannel refers to a structure of sound tracks
having three or more channels.
Parental Control: A function of the DVD to
limit playback of the disc by the age of the users
according to the limitation level in each country.
The limitation varies from disc to disc; when it is
activated, playback will be prohibited if the software’s level is higher than the user-set level.
PCM (Pulse Code Modulation): A system for
converting analog sound signal to digital signal for
later processing, with no data compression used
in conversion.
Playback control (PBC): Refers to the signal
recorded on video CDs or SVCDs for controlling reproduction. By using menu screens
recorded on a Video CD or SVCD that supports
PBC, you can enjoy interactive-type software as
well as software having a search function.
Play list: A list of selected titles to be played
back in a specific order. This option is only available with VR format and must be created beforehand.
37
Glossary
Progressive Scan: I.t displays all the horizontal
lines of a picture at one time, as a signal frame.
This system can convert the interlaced video
from DVD into progressive format for connection to a progressive display. It dramatically
increases the vertical resolution.
Region code: A system for allowing discs to be
played back only in the region designated beforehand. This unit will only play discs that have compatible region codes.You can find the region
code of your unit by looking on the product
label. Some discs are compatible with more than
one region (or ALL regions).
S-Video: Produces a clear picture by sending
separate signals for the luminance and the color.
You can use S-Video only if your TV has S- video
In jack.
Super Audio CD (SA-CD): This audio format is
based upon the current CD standards but includes a
greater amount of information that provides higher
quality sound. There are three types of discs: single
layer, double layer and hybrid discs. The hybrid disc
contains both standard audio CD and Super Audio
CD information.
Surround: A system for creating realistic three
dimensional sound fields full of realism by arranging multiple speakers around the listener.
Title: The longest section of a picture or music
feature on DVD, music, etc., in video software,
or the entire album in audio software. Each title
is assigned a title number enabling you to locate
the title you want.
VIDEO OUT jack: Jack on the back of the
DVD System that sends video to a TV.
VR (Video Recording) format: A format
which enables you to create a DVD disc that can
be extensively re-edited.
38
Specifications
AUDIO PERFORMANCE
DVD Video
DVD-Audio
SA-CD multi-channel and SA-CD stereo
Video CD & SVCD
CD
PICTURE CD
CD-R, CD-RW
DVD+R, DVD+RW
DVD-R, DVD-RW
DA Converter
24 bit
Signal-Noise (1 kHz)
110 dB
Dynamic range (1 kHz)
100 dB
DVD
fs 96 kHz
fs 48 kHz
SVCD
fs 48 kHz
fs 44.1 kHz
CD/VCD
fs 44.1 kHz
Distortion and Noise (1 kHz)
VIDEO PERFORMANCE
TV STANDARD (PAL/50 Hz) (NTSC/60 Hz)
Video (CVBS) Output
S-Video output
Number of lines
Playback
RGB (SCART) output
Component video output
1 Vpp into 75 ohm
Y: 1 Vpp into 75 ohm
C: 0.3 Vpp into 75 ohm
0.7 Vpp into 75 ohm
Y: 1 Vpp into 75 ohm
Pb/Cb Pr/Cr: 0.7 Vpp into
75 ohm
AUDIO FORMAT
Digital
Mpeg/Dolby Digital/Compressed Digital
DTS
PCM
16, 20, 24 bits
fs, 44.1, 48, 96 kHz
MP3(ISO 9660)
24, 32, 56, 64, 96, 128,
256 kbps
fs, 16, 22.05, 24, 32,
44.1, 48 kHz
WMA
32 kbps–192 kbps, mono,
stereo
Full decoding of Dolby Digital, DTS and MPEG multichannel sound/analog stereo sound
Dolby Surround Compatible Downmix from Dolby Digital
multi-channel sound
3D sound for virtual 5.1 channel sound on two speakers
Dolby Pro Logic II 5.1 ch decoding from the stereo source
Output Power
Beam divergence
2 Hz- 44 kHz
2 Hz- 22 kHz
2 Hz- 22 kHz
2 Hz- 20 kHz
2 Hz- 20 kHz
0.003 %
525
(PAL/NTSC)
CONNECTIONS
SCART
Y Output
Pb/Cb Output
Pr/Cr Output
S-Video Output
Video Output
Audio Output (L+R)
Digital Output
Euroconnector
Cinch (green)
Cinch (blue)
Cinch (red)
Mini DIN, 4 pins
Cinch
Cinch
1 coaxial, 1 optical
IEC60958 for CDDA/LPCM
IEC61937 for MPEG1, MPEG 2,
Dolby Digital and DTS
6 channel analog output
Audio Front L/R
Cinch (white/red)
Audio Surround L/R Cinch (white/red)
Audio Center
Cinch (blue)
Audio Subwoofer
Cinch (black)
CABINET
Dimensions (w x d x h)
Weight
435 x 310 x 51 mm
Approx. 2.6 Kg
POWER SUPPLY
LASER
Type
Wave length
625
Multistandard
English
PLAYBACK SYSTEM
Semiconductor laser GaAlAs
650 nm (DVD)
780 nm (VCD/CD)
7 mW (DVD)
10 mW (VCD/CD)
60 degree
Power inlet
Power usage
Power usage standby
230 V, 50 Hz
Approx. 14 W
<1W
Specifications subject to change without prior
notice.
39
Important notes for users in the
U.K.
Mains plug
This apparatus is fitted with an approved 13
Amp plug. To change a fuse in this type of plug
proceed as follows:
1 Remove fuse cover and fuse.
2 Fix new fuse which should be a BS1362 5 Amp,
A.S.T.A. or BSI approved type.
3 Refit the fuse cover.
If the fitted plug is not suitable for your jack
outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should
have a value of 5 Amp. If a plug without a fuse
is used, the fuse at the distribution board should
not be greater than 5 Amp.
VAROITUS
Muiden kuin tässä esitettyjen toimintojen säädön tai
asetusten muutto saattaa altistaa vaaralliselle säteilylle
tai muille vaarallisille toiminnoille.
DK
Advarsel: Usynlig laserstråling ved åbning når
sikkerhedsafbrydere er ude af funktion. Undgå
utsættelse for stråling.
Bemærk: Netafbryderen STANDBY/ON er
sekundært indkoblet og ofbryder ikke strømmen fra
nettet. Den indbyggede netdel er derfor tilsluttet til
lysnettet så længe netstikket sidder i stikkontakten.
N
Observer: Nettbryteren STANDBY/ON er sekundert
innkoplet. Den innebygdenetdelen er derfor ikke
frakoplet nettet så lenge apparatet er tilsluttet
nettkontakten.
Note: The severed plug must be disposed to avoid
a possible shock hazard should it be inserted into
a 13 Amp jack elsewhere.
S
Klass 1 laseraparat
Varning! Om apparaten används på annat sätt än i
denna bruksanvisning specificerats, kan användaren
utsättas för osynlig laserstrålning, som överskrider
gränsen för laserklass 1.
How to connect a plug
The wires in the mains lead are coloured with
the following code: blue = neutral (N),
brown = live (L).
Observera! Strömbrytaren STANDBY/ON är
sekundärt kopplad och inte bryter inte strömmen från
nätet. Den inbyggda nätdelen är därför ansluten till
elnätet så länge stickproppen sitter i vägguttaget.
● As these colours may not correspond with the
colour markings identifying the terminals in your
plug, proceed as follows:
– Connect the blue wire to the terminal
marked N or coloured black.
– Connect the brown wire to the terminal
marked L or coloured red.
– Do not connect either wire to the earth
terminal in the plug, marked E (or e) or
coloured green (or green and yellow).
Before replacing the plug cover, make certain
that the cord grip is clamped over the sheath of
the lead - not simply over the two wires.
Copyright in the U.K.
Recording and playback of material may require
consent. See Copyright Act 1956 and The
Performer’s Protection Acts 1958 to 1972.
SF
Luokan 1 laserlaite
Varoitus! Laitteen käyttäminen muulla kuin tässä
käyttöohjeessa mainitulla tavalla saattaa altistaa
käyttäjän turvallisuusluokan 1 ylittävälle
näkymättömälle lasersäteilylle.
Oikeus muutoksiin varataan. Laite ei saa olla alttiina
tippu-ja roiskevedelle.
Toiminnanvalitsin STANDBY/ON on kytketty
toisiopuolelle, eikä se kytke laitetta irti sähköverkosta.
Sisäänrakennettu verkko-osa on kytkettynä
sähköverkkoon aina silloin, kun pistoke on
pistorasiassa.
VARO!
AVATTAESSA JA SUOJALUKITUS
OHITETTAESSA OLET ALTTIINA
NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.
ÄLÄ KATSO SÄ TEESEEN.
VARNING!
OSYNLIG LASERSTRÅLNING NÄR DENNA
DEL ÄR ÖPPNAD OCH SPÄRREN ÄR
URKOPPLAD. BETRAKTA EJ STRÅLEN.
i
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein
may result in hazardous radiation exposure.
The unit is not disconnected from the AC power source as long
as it is connected to the wall outlet, even if this unit itself is
turned off. This state is called the standby mode. In this state, this
unit is designed to consume a very small quantity of power.
ATTENTION
L’emploi de commandes, de réglages ou un
choix de procédures différents des
spécifications de cette brochure peut entraîner
une exposition à d’éventuelles radiations pouvant
être dangereses.
L’appareil n’est pas isolé de la source d’alimentation aussi
longtemps qu’il reste branché sur une prise murale, même
lorsqu’il est éteint. Il est alors dit en mode «Veille». Dans ce
mode, l’appareil consomme très peu de courant.
ACHTUNG
Die Verwendung von Bedienungselementen oder
Einstellungen oder die Durchführung von
Bedienungsvorgängen, die nicht in dieser
Anleitung aufgeführt sind, kann zu einem Kontakt
mit gefährlichen Laserstrahlen führen.
Das Gerät ist nicht vom Netz getrennt, solange der Netzstecker
noch mit der Wandsteckdose verbunden ist, selbst wenn das
Gerät ausgeschaltet wurde. Dieser Betriebszustand wird als
Bereitschaftsmodus bezeichnet. In diesem Zustand nimmt das
Gerät eine sehr geringe Menge Strom auf.
Enheten är inte urkopplad från nätet så länge som den är
ansluten till vägguttaget även om enheten i sig självt är avstängd.
Detta kallas för beredskapsläge och i detta tillstånd konsumerar
apparaten minimalt med ström.
OBSERVERA
Användning av kontroller och justeringar eller
genomförande av procedurer andra än de som
specificeras i denna bok kan resultera i att du
utsätter dig för farlig strålning.
L’unità non è scollegata dall’impianto elettrico di casa sintanto
che rimane collegata ad una presa di corrente anche se è spenta.
Questo modo viene chiamato “modo di attesa”. In esso, l’unità
consuma una quantità molto bassa di energia per mantenere in
memoria le impostazioni da voi fatte.
ATTENZIONE
Uso di controlli o regolazioni o procedure non
specificamente descritte può causare
l’esposizione a radiazioni di livello pericoloso.
Aunque el propio aparato se encuentre apagado, éste no se
desconectará de la fuente de CA siempre que se mantenga
enchufado a la toma de corriente. Este estado recibe el nombre
de “modo de espera”. En este estado, este aparato ha sido
diseñado para consumir una cantidad muy pequeña de energía.
PRECAUCIÓN
El uso de los controles o los procedimientos de
ajuste o utilización diferentes de los
especificados en este manual pueden causar
una exposición peligrosa a la radiación.
De stroomtoevoer naar het toestel is niet afgesloten zolang de
stekker nog in het stopcontact zit, zelfs niet als het toestel zelf
uitgeschakeld is. Deze toestand wordt “standby” (waak- of
paraatstand) genoemd. Het toestel is ontworpen om in deze
toestand.
VOORZICHTIG
Gebruik van bedieningsorganen of instellingen,
of uitvoeren van handelingen anders dan staan
beschreven in deze handleiding kunnen leiden
tot blootstelling aan gevaarlijke stralen.
Данное устройство не отсоединено от источника
переменного напряжения до тех пор, пока оно
подключено к настенной розетке, даже если само
данное устройство выключено. Это состояние
называется режимом готовности. В этом состоянии
данное устройство потребляет очень малое
количество электроэнергии.
ПРЕДУПРЕЖДЕНИЕ
Использование органов управления или
настроек или выполнение процедур, отличных
от описанных в данном руководстве, могут
привести к опасному облучению.
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN
DO NOT STARE INTO BEAM
DANGER: INVISIBLE LASER RADIATION WHEN OPEN
AVOID DIRECT EXPOSURE TO THE BEAM
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO BEAM.
ADVARSEL
SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING.
UNDGÅ UDSÆTTELSE FOR STRÅLING.
ADVARSEL
SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL
ÅPNES. UNNGÅ EKSPONERING FOR STRÅLEN.
VARNING
SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA
DEL ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.
VARO!
AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA
NÄKYMÄTTÖMÄLLE LASER SÄ TEILYLLE. ÄLÄ KATSO
SÄTEESEEN.
VORSICHT
SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG
WENN ABDECKUNG GEÖFFNET. NICHT DEM STRAHL
AUSSETSEN.
DANGER
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID DIRECT EXPOSURE TO BEAM.
ATTENTION
RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS
D’OUVERTURE. EXPOSITION DANGEREUSE AU
FAISCEAU.
ПРЕДУПРЕЖДЕНИЕ
ПРИ ОТКРЫТИИ УСТРОЙСТВА ВЫ МОЖЕТЕ
ПОДВЕРГНУТЬСЯ ВОЗДЕЙСТВИЮ ВИДИМОГО И
НЕВИДИМОГО ЛАЗЕРНОГО ИЗЛУЧЕНИЯ.
ИЗБЕГАЙТЕ ВОЗДЕЙСТВИЯ ЛУЧА.
ii