DVX-S300_CA_cv.fm Page 1 Tuesday, June 7, 2005 2:56 PM
CA
DVX-S301/DVX-S302/DVX-S303
© 2005
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
All rights reserved.
Printed in China
3139 246 16151
OWNER’S MANUAL
MODE D’EMPLOI
Features
Playable disc formats
This receiver can play the disc types associated with the
logos shown below. (Do not attempt to load any other type
of disc into the receiver, or the receiver may be damaged.)
Sound field features
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, “MLP
Lossless” and the double-D symbol are
trademarks of Dolby Laboratories.
DIGITAL VIDEO
SUPER VIDEO
“DTS” and “DTS Digital Surround” are
registered trademarks of Digital Theater
Systems, Inc.
“DivX”, “DivX Certified”, and associated logos
are trademarks of DivXNetworks, Inc and are
used under license.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
1
English
Active Servo Processing Subwoofer System with a
built-in power amplifier. The subwoofer system
(NX-SW300 and NX-SW301) employs Advanced
Yamaha Active Servo Technology which YAMAHA
has developed for reproducing higher quality superbass sound. This super-bass sound adds a more
realistic, theater-in-the-home effect to your stereo
system.
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions.
CAUTION
2 Keep these instructions.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
* Explanation of Graphical Symbols
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert you to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert you to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
IMPORTANT
Please record the serial number of this unit in the
space below.
10 Protect the power cord from being walked on or pinched
particularly at the plugs, convenience receptacles, and the
point where they exit from the apparatus.
MODEL:
11 Only use attachments/accessories specified by the
manufacturer.
Serial No.:
The serial number is located on the bottom of
the unit.
Retain this Owner’s Manual in a safe place for
future reference.
12 Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or when unused
for a long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15 Be sure to allow spaces of at least 10 cm above, behind and on
both sides of DVR-S300, and at least 1m above, 30cm behind
and on both sides of NX-SW300 and NX-SW301.
16 Do not place the following objects on this unit:
A vessel with water in it.
If the vessel falls by vibrations and water spills, it may cause
damage to the unit, and/or you may get an electric shock.
Apparatus shall not be exposed to dripping or splashing.
i
IMPORTANT SAFETY INSTRUCTIONS
FCC INFORMATION (for US customers)
1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements.
Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could
void your FCC authorization to use this product in the USA.
3 NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B”
digital devices.
Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential
environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio
frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful
to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur
in all installations. If this product is found to be the source of interference, which can be determined by turning the product
“OFF” and “ON”, please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type
of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6660 Orangethorpe Ave.
Buena Park, CA90622.
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN
DO NOT STARE INTO BEAM
DANGER: INVISIBLE LASER RADIATION WHEN OPEN
AVOID DIRECT EXPOSURE TO THE BEAM
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
SÉCURITÉ LASER
L'appareil utilise un laser. En raison des risques de
blessure des yeux, le retrait du couvercle ou les
réparations de l'appareil devront être confiés
exclusivement à un technicien d'entretien qualifié.
¶ The name plate is located on the bottom of the unit.
¶ La plaquette signalétique est placée sur le panneau de fond de l’appareil.
LASER SAFETY
This unit employs a laser. Due to possible eye injury,
only a qualified service person should remove the
cover or attempt to service this device.
DANGER
This unit emits visible laser radiation when open. Avoid
direct eye exposure to beam. When this unit is plugged
into a wall outlet, do not place your eyes close to the
opening of the disc tray and other openings or look inside.
LASER
Type
Wave length
Output Power
Beam divergence
Semiconductor laser GaAlAs
650 nm (DVD)
784 nm (VCD/CD)
7 mW (DVD/VCD/CD)
60 degrees
DANGER
Risque d'exposition au laser en cas d'ouverture. Eviter
toute exposition au faisceau. Lorsque cet appareil est
branché à la prise de courant, ne pas approcher les
yeux de l'ouverture du plateau changeur et des autres
ouvertures pour regarder à l'intérieur.
LASER
Type
Laser à semi-conducteur
GaAIAs
Longueur d’onde
650 nm (DVD)
784 nm (VCD/CD)
Puissance de sortie
7 mW (DVD/VCD/CD)
Divergence de faisceau 60 degrés
AVERTISSEMENT
L’utilisation de commandes et l’emploi de réglages ou
de méthodes autres que ceux décrits ci-dessous,
peuvent entraîner une exposition à un rayonnement
dangereux.
ii
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install this sound system in a well ventilated, cool, dry, clean place
with at least 10 cm on the top, 10 cm on the left and right, and 10
cm at the back of DVR-S300 and at least 1 m above, 30 cm
behind and on both sides of NX-SW300 or NX-SW301 for
adequate ventilation. — away from direct sunlight, heat sources,
vibration, dust, moisture, and/or cold.
3 Locate this unit away from other electrical appliances, motors,
or transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature changes from
cold to hot, nor locate this unit in an environment with high
humidity (i.e., a room with a humidifier) to prevent
condensation inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal injury.
5 Avoid installing this unit in a location where foreign objects
may fall onto this unit or where this unit may be exposed to
liquid dripping or splashing. On the top of this unit, do not
place:
– Other components, as they may cause damage and/or
discoloration on the surface of this unit.
– Burning objects (i.e., candles), as they may cause fire,
damage to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall, spilling
the liquid and causing an electrical shock to the user and/
or damage to this unit.
6 Do not cover this unit with a newspaper, tablecloth, curtain,
etc. in order not to obstruct heat radiation. If the temperature
inside this unit rises, it may cause fire, damage to this unit,
and/or personal injury.
7 Do not plug in this unit to a wall outlet until all connections
are complete.
8 Do not operate this unit upside-down. It may overheat,
possibly causing damage.
9 Do not use excessive force on switches, knobs and/or cords.
10 When disconnecting the power cord from the wall outlet,
grasp the plug; do not pull the cord.
11 Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
12 Use only the voltage specified on this unit. Using this unit
with a higher voltage than specified is dangerous and may
cause fire, damage to this unit, and/or personal injury.
YAMAHA will not be held responsible for any damage
resulting from use of this unit with a voltage other than as
specified.
13 To prevent damage by lightning, keep the power cord out and
outdoor antennas disconnected from a wall outlet or the unit
during a lightning storm.
14 Do not attempt to modify or fix this unit. Contact qualified
YAMAHA service personnel when any service is needed. The
cabinet should never be opened for any reason.
15 When not planning to use this unit for long periods of time (i.e.,
vacation), disconnect the AC power plug from the wall outlet.
16 Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that this unit is
faulty.
17 Before moving this unit, press STANDBY/ON to set the unit
in standby mode, then disconnect the AC power plug from the
wall outlet.
iii
18 Condensation will form when the surrounding temperature
changes suddenly. Disconnect the power cable from the
outlet, then leave the unit alone.
19 When using the unit for a long time, the unit may become
warm. Turn the power off, then leave the unit alone for
cooling.
20 Install this unit near the AC outlet and where the AC power
plug can be reached easily.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
This unit is not disconnected from the AC power
source as long as it is connected to the wall outlet,
even if this unit itself is turned off. This state is called
the standby mode. In this state, this unit is designed to
consume a very small quantity of power.
Laser component in this product is capable of emitting
radiation exceeding the limit for Class 1.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
1
CONTENTS
1.INTRODUCTION
2
4.OPERATIONS
INTRODUCTION .........................................
Supplied accessories........................................
FUNCTIONAL OVERVIEW .........................
Top and front panels (DVR-S300)..................
Rear panel (DVR-S300)..................................
Rear panel (NX-SW300).................................
Rear panel (NX-SW301).................................
Remote control (For DVR-S300)....................
2
5
6
6
7
8
8
9
DISC OPERATION ................................... 28
Playing discs.................................................. 28
Basic playback controls................................. 28
Selecting various repeat shuffle functions..... 29
Shuffle ........................................................... 29
Other operations for video playback
(DVD/VCD/SVCD)................................... 30
Playing MP3/JPEG/DivX® discs.................. 33
Playing Super Audio CDs ............................. 34
Special features for picture disc playback ..... 35
3
4
5
2.PREPARATION
CONNECTIONS ........................................
Roles and layout of the speakers...................
Placing the center speaker.............................
Placing the front/surround speakers ..............
Placing the subwoofer ...................................
SYSTEM CONNECTIONS........................
Connecting the speakers (DVX-S301)..........
Connecting the speakers (DVX-S302)..........
Connecting the speakers (DVX-S303)..........
Connecting the speaker cables ......................
Connecting the subwoofer.............................
Connecting the DVD receiver and the
subwoofer ..................................................
OTHER CONNECTIONS...........................
Connecting a TV ...........................................
Connecting the FM/AM antennas .................
Connecting external AV components ...........
Connecting digital audio components...........
11
11
12
13
13
14
14
15
16
17
17
18
19
19
20
21
22
3.BASIC OPERATION
GETTING STARTED ................................. 23
Inserting batteries into the remote control .... 23
Using the remote control............................... 23
Setting a TV .................................................. 24
Setting language preferences......................... 26
Setting speaker channels ............................... 27
6
5.ON-SCREEN MENU
DVD SETUP MENU OPTIONS ................. 36
General setup menu ....................................... 36
Audio setup menu.......................................... 38
Video setup menu .......................................... 39
Preference setup menu................................... 41
6.OTHER FEATURES
TUNER OPERATIONS ............................. 44
Tuning radio stations ..................................... 44
Presetting radio stations................................. 44
SOUND CONTROLS ................................ 46
Selecting surround sound .............................. 46
Selecting digital sound effects....................... 46
Adjusting the treble/bass level....................... 46
Adjusting the volume level............................ 47
Night listening mode ..................................... 47
Switching to active mode .............................. 47
Switching to standby mode ........................... 47
OTHER FUNCTIONS................................ 48
Setting remote control codes ......................... 48
Controlling other components ....................... 48
Dimming the display screen .......................... 49
Setting the sleep timer ................................... 49
Recording on an external AV component ..... 49
TROUBLESHOOTING.............................. 50
GLOSSARY .............................................. 52
SPECIFICATIONS .................................... 54
English
1
INTRODUCTION
INTRODUCTION
Thank you for purchasing this unit. This Owner’s Manual
explains the basic operation of this unit.
Notes about discs
– This receiver is designed for use with the following
discs: Super Audio CD (Super Audio CD), DVDVideo, Video CD, Super Video CD, Audio CD, CDR, CD-RW, DVD-Audio, DVD+RW, DVD+R,
DVD-R, DVD-RW and DVD-RW (VR format).
This receiver can play:
– MP3 and picture (Kodak, JPEG) files recorded on
CD-R(W).
– JPEG/ISO 9660 format
– Maximum 30 character display
– DivX® disc on CD-R[W]/DVD+R[W]/
DVD-R[W](3.11, 4.x and 5.x)
Notes
– CD-R, CD-RW and DVD-RW (VR format) cannot
be played unless finalized.
– Some discs cannot be played depending on the
recording conditions, such as the PC environment
and application software. The characteristics and
condition of some discs; materials, scratches,
curvature, etc, may result in playback failure.
– Be sure to use only CD-R and CD-RW discs made
by reliable manufacturers.
– Do not use any non-standard shaped discs (heartshaped, etc.).
– Do not use discs with tape, seals, or paste on their
surface. Doing so may damage this receiver.
– Do not use discs affixed with labels printed by a
commercially available label printer.
2
Cleaning discs
– When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center out. Do not
wipe in a circlar motion.
– Do not use solvents such as benzine, thinner,
commercially available cleaners, or antistatic spray
intended for analog records.
Avoid high temperatures, moisture, water
and dust
– Do not expose the system, batteries or discs to
humidity, rain, sand or excessive heat (caused by
heating equipment or direct sunlight). Always keep
the disc tray closed to avoid getting dust on the lens.
Avoid condensation problem
– The lens may cloud over when the receiver is
suddenly moved from cold to warm surroundings,
making it impossible to play a disc. Leave the
receiver in the warm environment until the moisture
evaporates.
Disc care
– Write only on the printed side of a CD-R/
CD-RW and only with a soft felt-tipped pen.
– Handle the disc by its edge; do not touch the
surface.
Cabinet care
– Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution containing
alcohol, spirits, ammonia, or abrasives.
Choosing a suitable location
– Place the receiver on a flat, hard, and stable surface.
INTRODUCTION
Destination
U.S.A. and
Canada models
Region
code of
DVR-S300
1
Sound field features
“DTS” and “DTS Digital Surround” are
registered trademarks of Digital Theater
Systems, Inc.
Playable
discs
1
1
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, “MLP
Lossless” and the double-D symbol are
trademarks of Dolby Laboratories.
“DivX”, “DivX Certified”, and associated logos
are trademarks of DivXNetworks, Inc and are
used under license.
INTRODUCTION
Region codes
The unit is designed to support the Region Management
System. Check the region code number on the disc
package. If the number does not match the unit’s region
number (see the table below or the back of the unit), the
unit may be unable to play the disc.
ALL
U.K. and Europe
models
2
2
ALL
Australia
model
4
4
ALL
Korea, Asia and
Taiwan models
3
3
ALL
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Active Servo Processing Subwoofer System with built-in
power amplifier.
This subwoofer system (NX-SW300, NX-SW301) employes
Advanced YAMAHA Active Servo Technology which
YAMAHA has developed for reproducing higher quality
super-bass sound. This super-bass sound adds a more
realistic, theater-in-the-home effect to your stereo syetem.
■ We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the
most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear
without annoying blaring or distortion - and, most importantly, without affecting your sensitive hearing.
Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the
Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged
exposure from excessive volume levels.
English
3
INTRODUCTION
DVX-S301
4
DVX-S302
DVD receiver
(DVR-S300)
DVD receiver
(DVR-S300)
Subwoofer
(NX-SW301)
Subwoofer
(NX-SW301)
Center speaker
(NX-C301)
Center speaker
(NX-C302)
Front/Surround
speakers (x4)
(NX-S301)
Front/Surround
speakers (x4)
(NX-S302)
INTRODUCTION
DVX-S303
INTRODUCTION
DVD receiver
(DVR-S300)
1
■ Supplied accessories
FM wire antenna
AM loop antenna
Subwoofer
(NX-SW300)
Remote control
POWER
DIMMER
SLEEP
POWER
TV
SCAN
PROG
REPEAT
A-B
TOP MENU/RETURN
PAGE
SHUFFLE
ON SCREEN
ENTER
SET UP
MENU
PRESET
NIGHT
SUBTITLE AUDIO
ANGLE
ZOOM
TRE
TV VOL
TV CH
VOL
BASS
EFFECT
SURR
AUX
TUNER
TV
INPUT
TV
Center speaker
(NX-C302)
MUTE
DVD/CD
Batteries (x 2)
Video pin cable
Front/Surround
speakers (x 4)
(NX-S302)
System control cable
(4 m )
Speaker cables
(5 m x 3)
(15 m x 2)
Fasteners (2 sets)
Base(x 4)
(For NX-S302)
Screws (x 8)
Washers (x 8)
(For NX-S302)
English
Non-skid pad (1 set)
(For NX-SW301)
5
FUNCTIONAL OVERVIEW
FUNCTIONAL OVERVIEW
■ Top and front panels (DVR-S300)
1 2
3 4 5
6
7
8
9
1 STANDBY/ON
Turns on the DVD receiver, or sets it to the standby
mode (see “Auto eco power standby mode” on
page 28).
2
Opens/closes the disc tray.
3 b/a,w/f
DVD/CD mode: selects the previous/next track or
chapter. Press and hold to fast forward or fast reverse.
TUNER mode: tunes the radio preset up/down.
4 e
DVD/CD mode: pauses disc playback.
5 INPUT
Selects and input source or sets the priority level for
the audio input signals.
6 VOLUME
Adjusts the volume level.
7 Disc tray
Load the disc in the disc tray.
A
B
8 System display panel
Shows information about the operational status of the
unit.
MULTI
Lights up when you play a multi-channel audio
source.
DOWNMIX
Lights up when you play discs that allow down mixing
of multi-channel audio sources.
It does not light up for discs that prohibit down
mixing, even if you play a multi-channel audio source.
9 h
DVD/CD mode: starts disc playback.
TUNER mode: starts preset radio station installation
in Plug & Play mode.
0 s
Exits an operation.
DVD/CD mode: stops playback.
TUNER mode: erases a preset radio station in Preset
mode if held more than two seconds, or stops preset
radio station installation in Auto Preset mode.
A Remote control sensor
Point the remote control towards this sensor.
B
6
0
Head phone jack
Connects headphones.
FUNCTIONAL OVERVIEW
■ Rear panel (DVR-S300)
1
(U.K. and Europe models)
2
3
4
VIDEO OUT (DVD ONLY)
VIDEO
567
INTRODUCTION
1
8 9
DIGITAL IN
L
OPTICAL
Y
FM
ANT
R
GND AM
ANT
75Ω UNBAL
TO SUBWOOFER
AV MONITOR OUT
(DVD ONLY)
S VIDEO
0
PR
PB
COMPONENT
PCM/DTS
q DIGITAL
A
LINE OUT
TV IN
AUX IN
SYSTEM
CONNECTOR
B
1 AC power cord
Connect to a standard AC outlet.
8 FM ANT terminal
Connect the FM antenna.
2 AV MONITOR OUT terminal
(U.K. and Europe models only)
Connect to your TV (see page 19).
9 GND and AM ANT terminals
Connect the AM loop antenna.
3 VIDEO output terminal
Connect to the video (composite) jack on your TV
(see page 19).
4 COMPONENT VIDEO OUT terminal
Connect the the Y PB/CB PR/CR jacks on your TV (see
page 19).
0 S VIDEO output terminal
Connect to the S-video jack on your TV or VCR.
A OPTICAL DIGITAL IN terminal
Connect to the DIGITAL OUT jack on your digital
audio component.
B SYSTEM CONNECTOR terminal
Connect the subwoofer.
5 LINE OUT terminal
Connect to the AUDIO IN jacks on your VCR.
6 TV IN terminal
Connect to the corresponding AUDIO OUT jacks on
your TV (see page 19).
7 AUX IN terminal
Connect to the AUDIO OUT jacks on your VCR or
cassette deck.
English
7
FUNCTIONAL OVERVIEW
■ Rear panel (NX-SW300)
■ Rear panel (NX-SW301)
1
2
3
1
23
1 SYSTEM CONNECTOR terminal
Connect to the DVD receiver.
1 SYSTEM CONNECTOR terminal
Connect to the DVD receiver.
2 SPEAKER terminals
Connect to the speakers.
2 SPEAKER terminals
Connect to the speakers.
3 AC power cord
Connect to a standard AC outlet.
3 AC power cord
Connect to a standard AC outlet.
8
FUNCTIONAL OVERVIEW
■ Remote control
(For DVR-S300)
POWER
DIMMER
SLEEP
I
3
4
5
6
PROG
REPEAT
SCAN
PAGE
K
A-B
SHUFFLE
M
TOP MENU/RETURN
ON SCREEN
Q
PRESET
SUBTITLE AUDIO
F
ANGLE
S
ZOOM
U
C
TRE
TV VOL
E
G
4 REPEAT
Selects various repeat modes.
N
5 PROG
DVD/CD mode: starts programming.
TUNER mode: starts automatic/manual preset
programming if held for more than two seconds.
P
A
D
L
SET UP
MENU
NIGHT
B
3 Numeric keypad (0 – 9)
Enters a track/title number of the disc.
Enters a number of a preset radio station.
O
9
0
J
ENTER
7
8
2 DIMMER
Selects different levels of brightness for the display
panel.
POWER
TV
TV CH
BASS
EFFECT
SURR
MUTE
W
Y
AUX
TUNER
R
6 TOP MENU/RETURN
Returns to the previous menu.
Displays the top-level disc menu
(if available).
t
V
VOL
TV
INPUT
TV
1
INTRODUCTION
2
1
1 POWER (TV)
Turns on the TV, or sets it to the standby mode.
X
DVD/CD
H
Note
For details on how to use the remote control, see page 23.
7 Cursors (
/
/
/
)
Selects movement direction in the menu.
TUNER mode: press left or right to tune the radio
frequency.
TUNER mode: press up or down to select auto
tuning.
8 ENTER (OK)
Confirms a selection.
9 MENU
Enters or exits the disc contents menu.
For VCD version 2.0 only:
In stop mode, turns on/off playback control (PBC)
mode.
During playback, returns to the main menu.
0 s
Exits an operation.
DVD/CD mode: stops playback.
DVD/CD mode: holding down the button will open
and close the disc tray.
TUNER mode: erases a preset radio station if held
for more than two seconds.
A d PRESET u ( b / a )
DVD/CD mode: selects the previous/next track or
chapter. Press and hold to fast forward or fast
reverse.
TUNER mode: press to select a preset radio station.
B SUBTITLE
Selects a subtitle language.
English
9
FUNCTIONAL OVERVIEW
C AUDIO
Selects an audio language (DVD) or an audio channel
(VCD).
D TV VOL (+ / –)
Adjusts the TV volume.
E TV CH (+ / –)
Switches the TV channel.
F TV INPUT
Switches the TV input.
G EFFECT
Selects a sound effect.
H Input selection buttons
Selects the appropriate active source mode.
TV mode: switches to TV input.
AUX mode: switches to AUX ANALOG/AUX
DIGITAL input.
TUNER mode: switches tuner (FM/AM) input.
DVD/CD mode: switches to DVD/CD mode.
I POWER (
)
Turns on the DVD receiver, or sets it to the standby
mode.
J SLEEP
Sets the sleep timer.
K SCAN
Scans each track/chapter on the disc.
L PAGE
Turns the pages of DVD-Audio still pictures.
M REPEAT A-B
Repeats a specific section on a disc.
N SHUFFLE
Plays tracks in random order.
O ON SCREEN
Displays the current status or disc information.
P SET UP
Enters or exits the system setup menu.
Q h
DVD/CD mode: starts disc playback.
10
R e
DVD/CD mode: pauses disc playback.
S NIGHT
Turns the Night mode on or off.
T ZOOM
Enlarges or reduces the TV screen picture.
U ANGLE
Selects a DVD disc camera angle (if available).
V VOL (+ / –)
Adjusts the volume level.
W TRE/BASS
Selects the TREBLE (high tone) or BASS (low tone)
sound mode.
Use the VOLUME control to change the tone level.
X MUTE
Mutes or restores the volume.
Y SURR
Selects multi-channel surround or stereo mode.
CONNECTIONS
CONNECTIONS
■ Roles and layout of the speakers
2
DVX-S302/DVX-S303
DVX-S301
DVD receiver
Center speaker
DVD receiver
2
Front
speaker (L)
1
+
4
Subwoofer
2
1
–
3
Surround
speaker (L)
Center speaker
Front
speaker (L)
Front
speaker (R)
1
–
PREPARATION
To enjoy quality sounds you need to place the speakers in their appropriate positions and install them correctly.
The following show the recommended layout of the speakers.
Front
speaker (R)
1
+
3
Surround
speaker (R)
3
Surround
speaker (L)
4
Subwoofer
3
Surround
speaker (R)
For the best possible surround sound, all of the speakers (except the subwoofer) should be placed at the same distance
from the listening position.
1 Front Speakers (L, R)
Place the front left/right speakers on both sides of your TV at equal distances.
Main roles: Produces front channel (stereo) sounds and effect sounds.
2 Center Speaker
Place on top of the TV or inside the TV rack so that the speaker and TV are aligned vertically.
Main role: Produces sounds oriented toward the center of the screen such as dialogues or vocal sounds.
3 Surround Speakers (L, R)
Place the surround left/right speakers behind the listening position. (For NX-S301, we recommend placing them at a height of 1.8 m
(6 feet) and pointing them at the listening position.)
Main roles: Produces surround sounds and effect sounds.
4 Subwoofer
Place the subwoofer near a front speaker and turn it slightly toward the center of the room to reduce wall reflections.
Main roles: Produces bass sounds and low frequency (LFE) sounds contained in Dolby Digital or DTS.
Note
To avoid magnetic interference, do not position the front speakers too close to your TV.
Allow adequate ventilation around the DVD receiver and subwoofer.
Bass sounds produced by the subwoofer may be heard differently depending on the listening position and subwoofer location.
To enjoy desired sounds, try to change the location of the subwoofer according to the listening position.
English
11
CONNECTIONS
■ Placing the center speaker
When placing the center speaker on top of the TV, use the
supplied fasteners to secure the speaker.
NX-C301
Attaching to a wall
You can attach the speakers to a wall using commercially
available screws (Diameter: 3.5 to 4 mm, Length: 25 mm
or more). Each speaker requires two screws.
NX-C301
110 mm
Screws (3.5
to 4 mm dia.,
commercially
available)
Fastener
Peel off
the seal
–
20 mm or more
+
NX-C302
151 mm
NX-C302
Peel off
the seal
1 Peel off the seals on one side of the fasteners and
attach them to the bottom of the center speaker.
2 Peel off the seals on the other side of the fasteners and
attach them to the top of the TV.
Notes
– Do not place the speaker on the TV if the top of the
TV is uneven or narrower than the bottom surface
of the speaker. Doing so may cause the speaker to
fall. In this case, place the speaker inside a TV rack
or on a level floor.
– Before attaching the fasteners to the TV, clean the
surface with a dry cloth. A dirty or wet surface may
weaken the adhesive force and cause the speaker to
fall.
– Do not touch the bonding surfaces of the fasteners
after peeling off the seals. Doing so may weaken
the adhensive force and cause the speaker to
fall.this installation. Use metric screw threads only.
12
–
+
Fastener
5 mm
Screws (3.5
to 4 mm dia.,
commercially
available)
20 mm or more
5 mm
1 Install two screws in the wall where you want to place
the speaker.
2 Hang the speaker on the screws using the holes in the
back of the speaker.
Notes
– To attach a speaker to a wall using screws, the wall
must be firm. Do not attach a speaker to a wall that
is made of weak materials such as plaster or
veneered woods. Doing so may cause the speaker
to fall.
– When connectiong the speakers, fix the speaker
cables in place so that cables do not loosen. If your
foot or hand accidentally gets caught on a loose
speaker cable, the speaker may fall.
– After attaching each speaker, check that the
speaker is fixed securely. YAMAHA will bear no
reponsibility for any accidents caused by improper
installations.
CONNECTIONS
■ Placing the front/surround
speakers
Attaching to a wall
Attach the base to the bottom of the front/surround
speakers (NX-S302) with the supplied base mounting
screws as shown below.
2
Base
mounting
screws
PREPARATION
You can attach the speakers to a wall using commercially
available screws (Diameter: 3.5 to 4 mm, Length: 25 mm
or more). Each speaker requires two screws.
Attaching the base
Base
NX-S301
40 mm
Screws (3.5
to 4 mm dia.,
commercially
available)
Washer
NX-S302
20 mm or more
–
5 mm
+
1 Install two screws in the wall where you want to place
the speaker.
2 Hang the speaker on the screws using the holes in the
back of the speaker.
Notes
– To attach a speaker to a wall using screws, the wall
must be firm. Do not attach a speaker to a wall that
is made of weak materials such as plaster or
veneered woods. Doing so may cause the speaker
to fall.
– When connectiong the speakers, fix the speaker
cables in place so that cables do not loosen. If your
foot or hand accidentally gets caught on a loose
speaker cable, the speaker may fall.
– After attaching each speaker, check that the
speaker is fixed securely. YAMAHA will bear no
reponsibility for any accidents caused by improper
installations.
Hanging on a wall (NX-S301)
You can hang the speakers on a wall using a commercially
available bracket and screws (Diameter: 6 mm). Attach a
bracket firmly to the rear of the speakers using screws.
Then mount a screw on the wall where the speaker is to be
hung and hook the speaker securely onto the mounted
screws.
Note
Placing the speakers (NX-S302) on the places such as hard
wooden floor may scratch the surface of the floor.
■ Placing the subwoofer
Attach the non-skid pads to the bottom of the subwoofer
(NX-SW301), and then place the subwoofer on a level
hard floor.
Peel off
the seal
Note
Using non-skid pads prevents the subwoofer from sliding
when it vibrates, and ensure quality sound production.
Note
Do not use screw threads neasured in inches for this
installation. Use metric screw threads only.
English
13
SYSTEM CONNECTIONS
SYSTEM CONNECTIONS
■ Connecting the speakers (DVX-S301)
Notes
– Do not connect the power cord of the subwoofer and DVD receiver into an AC outlet until all cable connections are completed.
– Please refer to the pages below for detailed information on how connect each speaker.
Front speaker (R)NX-S301
(page 17)
–
+
Front speaker (L) NX-S301
(page 17)
Center speaker
NX-C301
(page 17)
–
–
+
+
Red
Green
White
Tab
Blue
Gray
Tab
L
R
TO SUBWOOFER
SYSTEM
CONNECTOR
DVD receiver (DVR-S300)
Surround
speaker (R)
NX-S301
(page 17)
–
Surround
speaker (L)
NX-S301
(page 17)
+
–
Subwoofer
(NX-SW301)
14
+
SYSTEM CONNECTIONS
■ Connecting the speakers (DVX-S302)
Notes
– Do not connect the power cord of the subwoofer and DVD receiver into an AC outlet until all cable connections are completed.
– Please refer to the pages below for detailed information on how connect each speaker.
PREPARATION
Front speaker (L)
NX-S302
(page 17)
Front speaker (R)
NX-S302
(page 17)
2
Center speaker
NX-C302
(page 17)
+
+
+
+
Red
Black
Black
Red
Black
Red
Red
Tab
L
Green
White
R
TO SUBWOOFER
SYSTEM
CONNECTOR
DVD receiver (DVR-S300)
Blue
Gray
Tab
+
+
+
Red
Red
Subwoofer
NX-SW301
(page 17)
Black
Surround
speaker (L)
NX-S302
(page 17)
English
Surround
speaker (R)
NX-S302
(page 17)
+
Black
15
SYSTEM CONNECTIONS
■ Connecting the speakers (DVX-S303)
Notes
– Do not connect the power cord of the subwoofer and DVD receiver into an AC outlet until all cable connections are completed.
– Please refer to the pages below for detailed information on how to connect each speaker.
Front speaker
(R)
NX-S302
(page 17)
Front speaker
(L)
NX-S302
(page 17)
Surround
speaker (R)
NX-S302
(page 17)
Surround
speaker (R)
NX-S302
(page 17)
Center speaker
NX-C302
(page 17)
Red
+
+
+
+
+
+
+
+
Black
Red
Black
Black
Red
Red
To remove the speaker
cable plugs, see
“Connecting the
subwoofer” on page 17.
SPEAKERS
FRONT CENTER SURROUND
DVD receiver (DVR-S300)
L
R
FRONT CENTER SURROUND
TO SUBWOOFER
SYSTEM
CONNECTOR
Subwoofer
NX-SW300
(page 17)
16
Black
Red
Black
SYSTEM CONNECTIONS
■ Connecting the speaker cables
Connect the speaker cable with the color band to the plus
(Red (+)) connector on the front/center/surround speakers
and with the white line to the minus (Black (–)) connector.
Before connecting the speaker cables to the subwoofer
(NX-SW300), remove the cable plugs from supplied
speaker cables.
Press and hold the release button and remove the supplied
speaker cable from the cable plug.
Lever
(Black)
Lever
(Red)
Press the lever down, then
insert the cable into the hole
and release the lever.
2
PREPARATION
Color
band
Release button
Note
Be sure to twist the cable core firmly in a clockwise
direction. Twisting loosely may cause a short.
Good
No Good
Color
band
Lever
(Red)
FRONT R (Red), CENTER (Green), FRONT L
(White):
SURROUND R (Gray), SURROUND L (Blue):
Lever
(Black)
Press the lever down, then
insert the cable into the hole
and release the lever.
color
band
Lever
SPEAKERS
■ Connecting the subwoofer
Insert the cable plug of the speaker cable into the speaker
jack of the same color until you hear it click into place.
• FRONT R (Red), CENTER (Green), FRONT L
(White): Insert the cable plug facing the tub
upwards.
• SURROUND R (Gray), SURROUND L (Blue):
Insert the cable plug facing the tub downwards.
Red
Tab
FRONT CENTER SURROUND
Lift up the lever, then insert
the cable into the hole and
replace the lever.
NX-SW300
Note
Green
White
Do not use excessive force when inserting the cable
plug. Doing so may damage the cable plug or speaker
jack.
Blue
Gray
Tab
English
NX-SW301
17
SYSTEM CONNECTIONS
■ Connecting the DVD receiver and
the subwoofer
Connect the subwoofer to the DVD receiver using the
system control cable. Attach one end to the subwoofer and
the other to the SYSTEM CONNECTOR terminal at the
rear of the DVD receiver.
L
R
TO NX-SW300
SYSTEM
CONNECTOR
SYSTEM
CONNECTOR
SYSTEM
CONNECTOR
NX-SW301
L
R
TO SUBWOOFER
SYSTEM
CONNECTOR
SYSTEM
CONNECTOR
NX-SW300
SYSTEM
CONNECTOR
18
Notes
– After inserting the system control cable, be sure to
tighten the cable screws.
– Ensure that the speaker cables are correctly
connected. Improper connections may damage the
system due to a short-circuit.
– When connecting the speakers, fix the speaker
cables in place so that cables do not loosen. If your
foot or hand accidentally gets caught on a loose
speaker cable, the speaker may fall.
– To prevent unwanted noise, do not place the
subwoofer too close to the DVD receiver, AC
power adaptor, TV or other sources of radiation.
OTHER CONNECTIONS
OTHER CONNECTIONS
■ Connecting a TV
2
Notes
PREPARATION
– You only need to make one video connection from the following options (A,B,C, or D), depending on the
capabilities of your TV.
– Do not connect the power cords until all cable connections are completed.
<A>
<B>
<C>
TV
<E>
<D>
DVR-S300
(U.K. and Europe models only)
VIDEO OUT (DVD ONLY)
VIDEO
Y
DIGITAL IN
L
OPTICAL
R
AV MONITOR OUT
(DVD ONLY)
S VIDEO
PR
PB
COMPONENT
AV MONITOR OUT terminal <A>
(U.K. and Europe models only)
The SCART cable, or “Euro AV cable”, supports AV
MONITOR OUT signal transmission, providing you with
the best possible picture and sound. If your TV has only
one terminal for video input, and you want to connect it
directly to the DVD receiver, you can use the AV
MONITOR OUT connector. Connect one end of the
SCART cable to the AV MONITOR OUT connector and
the other end to the SCART connector on your TV.
Note
TV channels, if you use AV MONITOR OUT terminal to
connect the TV. To use AV MONITOR OUTterminal,
make sure to set the DVD receiver’s component setting to
“RGB” (see page 25).
PCM/DTS
q DIGITAL
LINE OUT
TV IN
AUX IN
S VIDEO output terminal<B>
S-(separate)video connections achieve a clearer picture
than composite video connections. Use an S-video cable
(not supplied) to connect the DVD receiver’s
S VIDEO jack to the S-video input jack (or Y/C or
S-VHS jack) on your TV.
VIDEO output terminal <C>
Use a composite video cable (yellow -supplied) to connect
the DVD receiver’s VIDEO jack to the video input jack
(or A/V In/Video In/Composite/ Baseband jack) on your
TV.
COMPONENT VIDEO OUT terminals
<D>
19
English
Use the component video cables (red/blue/green, not
supplied) to connect the DVD receiver’s Y PB PR jacks to
the corresponding component video input jacks (or the Y
Pb/Cb Pr/Cr/ YUV jacks) on your TV.
Progressive scan video quality is only available when
using Y PB PR in conjunction with a progressive scan TV.
To activate the progressive scan function see “Progressive
function” on page 39.
OTHER CONNECTIONS
TV IN terminal <E>
■ Connecting the FM/AM antennas
To listen to TV channels through this DVD receiver, use
the audio cables (white/red, not supplied) to connect the
TV IN jacks to the corresponding audio out jacks on your
TV.
AM loop
antenna
1
Notes
FM wire
antenna
– When using AV MONITOR OUT terminal to
listen to the TV channels, set the DVD receiver’s
component setting to “RGB” (see page 25).
– When using TV IN terminal, set the DVD
receiver’s component setting to“YUV” (see
page 25).
2
FM
ANT
GND AM
ANT
TO SUBWOOFER
IN
SYSTEM
CONNECTOR
Ground (GND terminal)
For minimum interference, connect
the antenna GND terminal to a good
earth ground. A good earth ground
is a metal stake driven into moist
earth.
1 Connect the supplied AM loop antenna to the AM
ANT terminal. Place the AM loop antenna on a shelf
or attach it to a stand or wall.
2 Connect the supplied FM wire antenna to the FM
ANT terminal. Extend the FM wire antenna and fix its
ends to the wall.
For better FM stereo reception, connect an external
FM antenna (not supplied).
Notes
– Adjust the position of the antennas for optimal
reception.
– Position the antennas as far as possible from your
TV, VCR or other sources of radiation to prevent
unwanted interference.
20
OTHER CONNECTIONS
■ Connecting external AV components
If you connect external AV equipment such as a VCR, cassette deck or digital audio component to the following AV
jacks on the DVD receiver, you can enjoy those AV sources with the DVD receiver. Also, you can record AV sources
played on the DVD receiver using the recording equipment. This section provides some examples of other AV equipment
connections. For information on your AV equipment, refer to the manual provided.
2
PREPARATION
TV
1
VCR (for example)
DVD receiver
VIDEO OUT (DVD ONLY)
VIDEO
Y
DIGITAL IN
L
OPTICAL
R
S VIDEO
PR
PB
COMPONENT
PCM/DTS
q DIGITAL
1
LINE OUT
2
TV IN
AUX IN
2
Viewing and listening to
playback
Using the VCR for recording DVD
playback
1 Connect the VCR to the TV as shown.
Some DVDs are copy-protected. You cannot record or dub
protected discs using a VCR.
2 Connect the DVD receiver’s AUX IN jack to the
AUDIO OUT jacks on your VCR.
Before starting operation, press AUX to select “AUX
ANALOG” in order to activate the input source.
1 Connect the DVD receiver’s S VIDEO jack output to
the S-VIDEO IN jack on your VCR.
2 Connect the DVD receiver’s LINE OUT jacks to the
AUDIO IN jacks on your VCR.
This will allow you to make analog stereo (two
channels, right and left) recordings.
English
21
OTHER CONNECTIONS
■ Connecting digital audio components
Digital audio
component
VIDEO OUT (DVD ONLY)
VIDEO
Y
DIGITAL IN
L
OPTICAL
R
S VIDEO
PR
PB
COMPONENT
PCM/DTS
q DIGITAL
LINE OUT
TV IN
AUX IN
DVD receiver
Listening to playback
Connect the DVD receiver’s DIGITAL IN jack to the
DIGITAL OUT jack on a digital audio component.
Before starting operation, press AUX repeatedly to select
“AUX DIGITAL” in order to activate the input source.
Notes
– You cannot hear or record the Super Audio-CD or
MP3-CD playback if you use a digital connection.
– For playback through a digital connection, set the
digital output of that player to PCM format.
– Always refer to the owner’s manual of the
connected component for complete connection and
usage details.
22
GETTING STARTED
GETTING STARTED
■ Inserting batteries into the
remote control
■ Using the remote control
Use the remote control within 6 m of the DVD receiver
and point it toward the remote control sensor.
3
3
Within 6 m
2
30˚
30˚
POWER
DIMMER
SLEEP
POWER
TV
SCAN
1 Open the battery compartment.
PROG
REPEAT - A - B
TOP MENU/RETURN
PAGE
SHUFFLE
ON SCREEN
ENTER
SET UP
MENU
2 Insert two batteries type R06 or AA, following the
indications (+/–) inside the compartment.
PRESET
NIGHT
SUBTITLE AUDIO
ANGLE
ZOOM
BASIC OPERATION
1
TRE
TV VOL
TV CH
VOL
BASS
TV
INPUT
TV
EFFECT
SURR
AUX
TUNER
MUTE
DVD/CD
3 Close the battery compartment.
To replace the batteries
If the batteries grow old, the effective operation distance
of the remote control decreases considerably. If this
happens, replace the batteries with two new ones as soon
as possible.
Notes
– Do not use an old battery together with new one.
– Do not use different types of batteries (for
example, alkaline and manganese) together. Each
type of battery has its own characteristics even if
they are similar in shape.
– If the batteries run out, immediately remove them
from the remote control to prevent an explosion or
acid leak.
– Dispose of the batteries according to the regional
regulations.
– If a battery starts leaking, dispose of it
immediately.
Be careful not to let leaking battery acid come into
contact with your skin or clothing. Before inserting
new batteries, wipe the compartment clean.
– Replace the batteries within two minutes to
preserve the memory in the remote control.
1 Use the input selection buttons on the remote control
to select the mode you wish to control (for example
TV, DVD/CD).
→ The selected source mode appears in the display
panel.
2 Select the desired function (for example, h or b /
a).
The remote control can also operate a television, cable
TV or satellite connected to the DVD receiver.
However, it is first necessary to enter the remote
control code for the equipment in the remote control’s
memory (see “LIST OF REMOTE CONTROL
CODES” at the end of this manual).
Notes
– Be careful not to spill liquid on the remote control.
– Be careful not to drop the remote control.
– Do not leave the remote control in the following
places:
– hot or humid places, such as near a heater or in a
bathroom
– extremely cold places
– dusty places
English
23
GETTING STARTED
■ Setting a TV
Note
Make sure you have completed all the necessary connections
(see “Connecting a TV” on page 19).
1 Press DVD/CD.
→ “DVD/CD” appears in the display panel.
2 Turn on the TV and set to the correct video-in channel.
→ You should see the background screen on the TV.
– Usually this channel is between the lowest and
highest channels and may be called FRONT, A/V IN
or VIDEO. See your TV manual for more details.
– Or, you may go to channel 1 on your TV, then press
the Channel down button repeatedly until you see the
Video In channel.
– Or, the TV remote control may have a button or
switch that chooses different video modes.
Selecting the TV type
In order for a DVD to play on this DVD receiver, the color
system of the DVD, the TV and the DVD receiver should
match. Before changing the TV system, determine the
color system of your TV.
1 In DVD/CD mode, press SET UP.
2 Press
3 Press
repeatedly to select [VIDEO SETUP PAGE].
/
to highlight [TV TYPE], then press
.
VIDEO SETUP PAGE
TV TYPE
PAL
TV DISPLAY
NTSC
PROGRESSIVE
MULTI
PICTURE SETTING
COMPONENT
24
4 Press
/
to highlight one of the options below:
PAL – Select this if the connected TV has the PAL
color system. It will change the video signal of an
NTSC disc and output it to PAL format.
NTSC – Select this if the connected TV has the NTSC
color system. It will change the video signal of a PAL
disc and output it to NTSC format.
MULTI – Select this if the connected TV is compatible
with both NTSC and PAL (multisystem). The output
format will be in accordance with the video signal of
the disc.
5 Select a setting and press ENTER (OK).
– Follow the instructions shown on the TV to confirm
the selection (if any).
– If a blank/distorted TV screen appears, wait for 15
seconds for auto recovery to activate.
Note
When you are selecting color system by using the remote
control, follow the procedure below.
1 Open the disc tray.
2 Press , then press AUDIO.
→ If the default setting of the color system is NTSC,
it will be changed to PAL.
→ If the default setting of the color system is PAL, it
will be changed to NTSC.
GETTING STARTED
Setting the TV display
Set the aspect ratio of the DVD receiver according to the
TV you have connected. The format you select must be
available on the disc. If it is not, the TV display setting
will not affect the picture during playback.
1 In DVD/CD mode, press SET UP.
repeatedly to select [VIDEO SETUP PAGE].
3 Press
/
press
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
YUV
COMPONENT
RGB
3
to highlight [TV DISPLAY], then
.
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
4:3 PAN SCAN
PROGRESSIVE
4:3 LETTER BOX
PICTURE SETTING 16:9
COMPONENT
4 Press
/
to highlight one of the options below:
YUV – Select this for Y PB PR or S-Video
connections.
RGB – Select this for AV MONITOR OUT
connections.
BASIC OPERATION
2 Press
VIDEO SETUP PAGE
5 Select a setting and press ENTER (OK).
6 To return to the previous menu, press
.
To exit the menu, press SET UP.
4 Press
/
to highlight one of the options below:
4:3 PAN SCAN – Select this if you have a
conventional TV and want both sides of the picture to
be trimmed or formatted to fit your TV screen.
4:3 LETTER BOX – Select this if you have a
conventional TV. In this case, a wide picture with
black bands on the upper and lower portions of the TV
screen will be displayed.
16:9 – Select this if you have a wide-screen TV.
5 Select a setting and press ENTER (OK).
Selecting the color system
(U.K. and Europe models only)
This setting allows you to toggle the video signal output
between YUV (Y PB PR or S-Video connections) and
RGB (AV MONITOR OUT connections).
Note
AV MONITOR OUT (SCART ) connections are only
available for U.K and Europe models.
1 In DVD/CD mode, press SET UP.
2 Press
repeatedly to select [VIDEO SETUP PAGE].
press
/
to highlight [COMPONENT], then
English
3 Press
.
25
GETTING STARTED
■ Setting language preferences
You can select your preferred language settings so that this
receiver will automatically switch to your preferred
language whenever you load a disc. If the language
selected is not available on the disc, the disc’s default
setting language will be used instead. The OSD (on-screen
display) language for the system menu will remain as you
set it, regardless of various disc languages.
Audio, Subtitle and Disc menu
languages
1 Press s twice to stop playback (if any), then press
SET UP.
2 Press
3 Press
On-screen display (OSD) language
1 In DVD/CD mode, press SET UP.
2 Press
to select [GENERAL SETUP PAGE].
3 Press
/
then press
repeatedly to select [PREFERENCE PAGE].
/
to highlight one of the options below
at a time, then press
.
– [AUDIO] (disc’s soundtrack)
– [SUBTITLE] (disc’s subtitles)
– [DISC MENU] (disc’s menu)
to highlight [OSD LANGUAGE],
PREFERENCE PAGE
.
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
VR LIST
PASSWORD
GENERAL SETUP PAGE
DVD AUDIO
DISC LOCK
PROGRAM
OSD LANGUAGE
SCREEN SAVER
DiVX(R) VOD CODE
ENGLISH
FRANÇAIS
ESPAÑOL
4 Press
/
to select a language and press
ENTER (OK) to confirm.
5 To return to the previous menu, press
To exit the menu, press SET UP.
.
ENGLISH
CHINESE
FRENCH
SPANISH
PORTUGUESE
POLISH
ITALIAN
TURKISH
4 Press
/
to select a language and press
ENTER (OK) to confirm.
If the language you want is not in the list, then select
[OTHERS].
Use the numeric keypad (0-9) on the remote control
to enter the 4-digit language code (see “LIST OF
LANGUAGE CODES” at the end of this manual”)
and press ENTER (OK) to confirm.
5 Repeat steps 3 and 4 for other settings.
6 To return to the previous menu, press
To exit the menu, press SET UP.
26
.
GETTING STARTED
■ Setting speaker channels
You can adjust the delay times (for center and surround
speakers only) and volume level for individual speakers.
These adjustments let you optimize the sound of your system
to best suit your surroundings and setup.
4 Press
/
to highlight one of the options below,
then press .
[SPEAKER VOLUME] – Volume level setting for
individual speakers (–6dB to +6dB).
Note
1 Press s to stop playback, then press SET UP.
2 Press
repeatedly to select [AUDIO SETUP PAGE].
3 Press
/
then press
to highlight [SPEAKER SETUP],
.
3
SPEAKER VOLUME SETUP
FRONT LEFT
0dB
FRONT RIGHT
0dB
CENTER
0dB
SUBWOOFER
0dB
SURROUND L
0dB
SURROUND R
0dB
[SPEAKERS DELAY] – Delay time settings is in
relation to the listening position/distance for center
and surround speakers (0 MS to 15 MS).
BASIC OPERATION
Press SURR on the remote control to select the multichannel surround mode before adjusting the speaker settings.
AUDIO SETUP PAGE
SPEAKER SETUP
CD UPSAMPLING
NIGHT MODE
LIP SYNC
SPEAKER SETUP PAGE
SPEAKERS VOLUME
SPEAKERS DELAY
SPEAKER DELAY SETUP
CENTER
SURROUND L
SURROUND R
0 MS
0 MS
0 MS
5 Press /
to adjust the setting that best suit your
surround sound needs.
6 Press ENTER (OK) to confirm.
7 To return to the previous menu, press
.
To exit the menu, press SET UP.
Notes
– Use a longer delay time settings when the surround
speakers are closer to the listener than the front
speakers.
– A test tone will be automatically generated to help
you judge the sound level of each speaker.
English
27
DISC OPERATION
DISC OPERATION
IMPORTANT!
– If the inhibit icon (
or “X”) appears on the TV
screen when a button is pressed, the function for
that button is not available on the current disc or at
the current time.
– DVD discs and players are designed with regional
restrictions. Before playing a disc, make sure the
disc is for the same zone as your receiver.
– Do not push on the disc tray or put any objects other
than discs on the disc tray. Doing so may cause the
disc player to malfunction.
Auto eco power standby mode
This is a power-saving feature. The receiver will
automatically switch to Eco Power standby mode if you
do not press any buttons for 30 minutes after a disc has
stopped playing.
■ Basic playback controls
POWER
■ Playing discs
DIMMER
SLEEP
POWER
SCAN
PAGE
TV
1 Press DVD/CD until “DVD/CD” appears in the display
panel.
2 Turn on the TV power and set to the correct Video In
channel (see “Setting a TV” on page 24).
→ You should see the background screen on the TV.
3 Press
once to open the disc tray and load a disc,
then press the same button again to close the disc tray.
PROG
REPEAT - A - B
TOP MENU/RETURN
Numeric
keypad (0-9)
SHUFFLE
ON SCREEN
ENTER
s
SET UP
MENU
dPRESETu
(b / a)
PRESET
NIGHT
SUBTITLE AUDIO
ANGLE
h
e
ZOOM
TRE
TV VOL
TV CH
VOL
BASS
EFFECT
SURR
TV
INPUT
TV
UT
INP
MUTE
AUX
TUNER
DVD/CD
ME
LU
VO
N
Y/O
DB
ST
AN
To pause playback
During playback, press e.
– To resume normal playback, press h.
4 Playback will start automatically.
→ If a disc menu shows on the TV, see “Using the
disc menu” on page 30.
→ If the disc is locked by parental control, you must
enter your six-digit password (see “Restricting
playback with parental control” on page 41).
To select another track/chapter
Press b / a or use the numeric keypad (0-9) to
enter a track/chapter number.
– During repeat playback of a track/chapter, pressing
b / a replays the same track/chapter.
To search backward/forward
Press and hold b / a. To resume normal chapter.
Searching backward/forward playback, press h.
– While searching, press b / a again to increase the
search speed.
To stop playback
Press s.
28
DISC OPERATION
■ Selecting various repeat shuffle
functions
Repeating a section within a chapter/
track
Repeat play mode
1 While playing a disc, press A-B at your chosen
starting point.
Repeat chapter/title/disc (DVD-V)
Each time you press REPEAT, the display changes as
follows:
CHAPTER
REPEAT OFF
TITLE
DISC
Repeat track/disc
(except DVD-V/DVD-A)
Each time you press REPEAT, the display changes as
follows:
TRACK
DISC
REPEAT OFF
TRACK: repeats the current track.
DISC: repeats the entire disc.
REPEAT OFF: exits repeat mode.
3 To exit the sequence, press A-B.
■ Shuffle (except VR format disc)
With the Shuffle function, you can play tracks in random
order.
– During playback, press SHUFFLE repeatedly to
select between SHUFFLE, SHUFFLE REPEAT and
SHUFFLE OFF.
→ The selected mode appears in the display for
several seconds.
– In SHUFFLE mode, all tracks on the disc currently
playing are played in random order.
– In SHUFFLE REPEAT mode, all tracks are played
in random order and continuously.
– For Hybrid Super Audio CDs, tracks on the Super
Audio CD layer are played by default (see “Playing
Super Audio CDs” on page 34).
4
OPERATIONS
CHAPTER*: repeats the current chapter.
TITLE: repeats the current title.
DISC*: repeats the entire disc.
REPEAT OFF: exits repeat mode.
* This feature may not be available with some discs.
2 Press A-B again at your chosen end point.
→ The section will now repeat continuously.
Repeat track/group/disc (DVD-A)
Each time you press REPEAT, the display changes as
follows:
TRACK
REPEAT OFF
GROUP
DISC
TRACK: repeats the current track.
GROUP: repeats the current group.
DISC: repeats the entire disc.
REPEAT OFF: exits repeat mode.
Note
For VCD, repeat playback is not possible if the PBC
mode is selected.
English
29
DISC OPERATION
■ Other operations for video
playback
(DVD/VCD/SVCD)
1 During playback, press ON SCREEN.
→ A list of available disc information appears on the
TV screen.
MENU
POWER
DIMMER
SLEEP
POWER
TITLE
02/02
CHAPTER
02/14
AUDIO
5.1CH
TV
SCAN
PROG
TOP MENU/
RETURN
MENU
REPEAT - A - B
TOP MENU/RETURN
PAGE
OFF
BITRATE 16
TITLE ELASPED 0:02:25
SHUFFLE
ON SCREEN
ON SCREEN
MENU
ENTER
TRACK
02/14
TT TIME
0:49:17
CH TIME
0:03:43
SET UP
MENU
PRESET
SUBTITLE
AUDIO
SUBTITLE
NIGHT
SUBTITLE AUDIO
ANGLE
ZOOM
ZOOM
ANGLE
REPEAT
OFF
BITRATE 16
TITLE ELASPED 0:02:25
TRE
TV VOL
TV CH
VOL
BASS
EFFECT
SURR
TV
INPUT
TV
MUTE
AUX
TUNER
DVD/CD
2 Press
/
to view the information and press
ENTER (OK) to access.
3 Use the numeric keypad (0-9) to enter the number/
Using the disc menu
Depending on the disc, a menu may appear on the TV
screen once you load the disc.
To select a playback feature or item
Use
/
/
/
or the numeric keypad
(0-9) on the remote control, then press ENTER (OK) to
start playback.
To access or remove the menu
Press MENU on the remote control.
Displaying disc information and the
current status
You can display disc information and the disc’s current
status (for example, title or chapter number, elapsed
playing time, audio/subtitle language). A number of
operations can be performed without interrupting disc
playback.
time or press
/
to make the selection, then
press ENTER (OK) to confirm.
→ Playback will change to the chosen time or to the
selected title/chapter/track.
Zooming in
This function allows you to enlarge the picture on the TV
screen and pan through the enlarged picture.
1 During playback, press ZOOM repeatedly to select a
different zoom factor.
Use
/
/
/
to move through the zoomed
image.
→ Playback continues.
2 Press ZOOM repeatedly to return to the original size.
Resuming playback from the last
stopped point
You can resume playback of the last 10 discs, even if the
disc was ejected or this receiver’s power switched off.
1 Load one of the last played 10 discs.
→ “LOAD” appears.
2 Press h and the disc will be played back from the last
stop point.
To cancel the resume mode
In stop mode, press s again.
30
DISC OPERATION
Viewing from another angle (DVD only)
1 During playback, press e on the remote control.
→ Play will pause and sound will be mute.
3 To resume normal playback, press h.
If the disc contains sequences recorded from different
camera angles, this function allows you to view the picture
from a number of different angles.
Press ANGLE repeatedly to select the desired angle.
→ Playback changes to the selected angle.
Changing sound track language
Selecting a title (DVD only)
This operation works only on DVDs with multiple
soundtrack language, you can change the language you
want while playing a DVD.
Press AUDIO repeatedly to select the available audio
languages.
Some DVDs may contain several titles. If the disc has
been recorded with a title menu recorded on it, you can
start playback from the selected movie title.
2 Press e again to select the next picture frame.
For VCD - changing the audio channel
Press AUDIO repeatedly to select the available audio
channels provided by the disc (STEREO, LEFT MONO,
RIGHT MONO or MIX MONO).
1 Press TOP MENU/RETURN.
→ The disc title menu appears on the TV screen.
2 Use
/
/
/
or the numeric keypad
(0-9) to select a play option.
4
OPERATIONS
Advancing by frame
3 Press ENTER (OK) to confirm.
Changing subtitle language (DVD only)
This operation works only on DVDs with multiple subtitle
languages, you can change the language you want while
playing a DVD.
Press SUBTITLE repeatedly to select from the various
subtitle languages.
Playback control (PBC) (VCD only)
PBC playback allows you to play Video CDs interactively,
following the menu on the display.
This function can also be accessed via the
‘PREFERENCE PAGE’ menu (see “PBC” on page 42).
For VCDs with Playback Control (PBC)
feature (version 2.0 only)
With playback stopped, press MENU to toggle between
‘PBC ON’ and ‘PBC OFF’.
→ If you select ‘PBC ON’, the disc menu (if available)
will appear on the TV. Use b / a or the numeric
keypad (0-9) to select a play option and press ENTER
(OK) to confirm.
→ If you select ‘PBC OFF’, the VCD will skip the index
menu and playback directly from the beginning.
English
31
DISC OPERATION
Preview function
Preview function includes the following 2 types.
Digest:
This function displays a thumbnail to help you to preview
the following sections of the disc.
TITLE, CHAPTER, GROUP, TRACK
Interval:
This function divides the following options at regular
intervals to help you preview the scene you want to see.
TITLE, CHAPTER, GROUP, TRACK, DISC
Preview title/chapter
(DVD for example)
1 Press SCAN.
→ The menu appears on the TV screen.
SELECT DIGEST TYPE:
TITLE DIGEST
CHAPTER DIGEST
TITLE INTERVAL
CHAPTER INTERVAL
2 Press
/
to highlight [TITLE DIGEST],
[CHAPTER DIGEST], [TITLE INTERVAL] or [CHAPTER
INTERVAL] and press ENTER (OK) to open one
option.
3 Use b / a to open the previous or next page.
(Example of 6 thumbnails in the display)
Note
The menu appears on the TV screen differs depending on the
Disc or current status (playback or stop).
4 Use
/
/
/
to select a title/chapter or use
the numeric keypad (0-9) to input the selected title/
chapter number next to [SELECT].
5 Press ENTER (OK) to start playback from the scene
you select.
To quit the preview function
Use
/
/
/
to highlight [EXIT] and press
ENTER (OK) to confirm.
To return to the preview menu
In step 3 and 4, use
/
/
/
to highlight
[MENU] and press ENTER (OK) to confirm.
32
DISC OPERATION
■ Playing MP3/JPEG/DivX® discs
This receiver can play DivX®, MP3, JPEG, VCD and
SVCD files on a personally recorded CD-R/RW disc or
commercial CD.
Note
You have to turn on your TV and set to the correct Video In
channel (see “Setting a TV” on page 24).
MP3
The MP3-CD formats (ISO9660 format)
support the following:
– MP3 files must have the extension “.MP3” or “.mp3”
– Max. 30 characters
– Max. nested directory is 8 levels.
– Max. album number is 99.
– Max. track number is 999.
– Supported sampling rates of 32, 44.1, 48/16, 22.05, and
24 kHz
The following features are not supported
for MP3 discs:
– The discs that have any types of file other than MP3
and JPEG.
– The simultaneous playback of the MP3 and JPEG files.
– Chinese filenames and text.
– Non-finalized closed discs.
– Discs recorded in UDF format.
4
OPERATIONS
1 Load the disc.
→ The disc reading time may exceed 30 seconds due
to the complexity of the directory/file configuration.
→ The disc menu appears on the TV screen.
MP3 disc features
MP3
MP3
MP3
2 Press
/
to select a desired folder and press
ENTER (OK) to open the folder.
3 Press
/
Additional note for MP3 disc playback:
– The disc read time may exceed 10 seconds due to the
large number of songs compiled onto one disc.
– Multi-session discs are supported.
– The digital output signals of MP3 files are copy
protected.
Downloading MP3 file from the internet or copying songs
from your own legal discs is a delicate process.
to select a track/file.
4 Press ENTER (OK) to confirm.
→ Playback will start from the selected file to the end
of the folder.
While the disc menu is displayed, you can:
– Press b / a to select another track/file in the
current folder.
– To select another folder from the current disc, press
to return to the root menu, then press
/
to
make your selection and press ENTER (OK) to
confirm.
– Press e to pause or h to resume playback.
Note
If you press
/
/
/
during playback of
JPEG images, the picture rotates.
English
33
DISC OPERATION
Playing MP3 music and a JPEG picture
simultaneously
Hybrid Super Audio CD Disc
1 CD layer that plays on any
CD player
1 Load an MP3 disc containing both music and picture
data.
→ The disc menu appears on the TV screen.
High Density layer containing:
2 - High Quality DSD Stereo
3 - High Quality DSD Multi-
2 Select an MP3 track and press h to start playback.
3 During MP3 music playback, select a picture folder
from the TV screen and press h.
→ The picture files will be played back until end of
the folder.
4 To quit simultaneous playback, press MENU followed
by s.
Notes
– It may not be possible to play certain MP3/JPEG/
DivX® discs due to the configuration and
characteristics of the disc or condition of the
recording.
– It is normal to experience an occasional “skip”
while listening to your MP3 disc.
– It is normal to experience an occasional pixelation
during DivX® playback due to poor clarity of
digital contents during internet downloading.
– For multi-session discs with different formats, only
the first session will be available.
■ Playing Super Audio CDs
There are three types of Super Audio CD discs: single
layer, double layer and hybrid discs.
Each type may contain up to two areas of recorded
information: a High Quality Stereo area and a High
Quality Multi-channel area.
– A single layer disc can contain both information
areas.
– A dual layer disc can contain both information
areas. Double the information can be stored on the
disc, thanks to the second layer.
– A hybrid disc can contain both information areas,
and also a second, standard CD layer, making it
playable on standard CD players.
Super Audio CD Disc
Hybrid layer disc
Dual layer disc
Single layer disc
HD layer
34
HD layer
CD layer
HD layer
channel
1 Load the Super Audio CD.
→ The disc menu appears on the TV screen.
2 Playback will start automatically.
– If the Super Audio CD consists of multi-channel and
stereo tracks, multi-channel tracks will have the
priority for playback.
/
to make
– To playback stereo tracks, use
your selection from the disc menu, then press h.
Note
Programming Super Audio CD tracks is not possible.
DISC OPERATION
■ Special features for picture disc
playback
Multi-angle playback
1 Load a picture disc (Kodak Picture CD/JPEG).
→ For Kodak discs, the slide show begins.
→ For JPEG discs, the picture menu appears on the TV
screen.
During playback, use /
/
/
picture on the TV screen.
: flips the picture vertically.
: flips the picture horizontally.
2 Press h to start the slideshow.
to rotate/flip the
: rotates the picture anti-clockwise.
: rotates the picture clockwise.
Note
You have to turn on your TV and set to the correct Video In
channel (see “Setting a TV” on page 24).
Press ANGLE repeatedly to choose a different scan effect.
→ Various scan effects appear in the top left corner of the
TV screen.
This function shows the content of the current folder or
the entire disc.
OPERATIONS
Preview function
4
Scan effect
1 During playback, press s.
→ 12 thumbnail pictures will appear on the TV
screen.
2 Press b / a to display the other pictures on the
previous/next page.
3 Use /
/
/
to highlight one of the picture
and press ENTER (OK) to start playback.
4 Press MENU to return to the picture CD menu.
Zooming pictures
1 During playback, press ZOOM repeatedly to select a
different zoom factor.
2 Use
/
image.
/
/
to move through the zoomed
English
35
DVD SETUP MENU OPTIONS
DVD SETUP MENU OPTIONS
This setup is carried out via the TV,
enabling you to customize the DVD
receiver to suit your particular
requirements.
Locking/Unlocking discs for viewing
■ General setup menu
Not all discs are rated or coded by the manufucturer of the
disc. You can prevent playback of a specific disc by
locking the disc. You can lock up to 40 discs on this unit.
1 In DVD/CD mode, press SET UP.
1 In [GENERAL SETUP PAGE], press
2 Press
/
PAGE].
highlight [DISC LOCK], then press
to select the [GENERAL SETUP
.
LOCK
Select this to block playback of the current disc.
Subsequent access to a locked disc requires a sixdigit
password. The default password is ‘000 000’ (see
“Changing the password” on page 43).
GENERAL SETUP PAGE
DVD AUDIO
DISC LOCK
PROGRAM
OSD LANGUAGE
SCREEN SAVER
DiVX(R) VOD CODE
2 Press
/
to select a setting and press ENTER
(OK) to confirm.
Programming disc tracks (except
picture CD/MP3/WMA/Super Audio CD
discs)
You can playback the contents of a disc in the order you
want by programming the tracks to be played. You can
store up to 20 tracks.
Selecting DVD-Audio/Video mode
1 In [GENERAL SETUP PAGE], presss
/
to
.
DVD-AUDIO MODE
Select this to playback the contents of the DVD-Audio.
DVD-VIDEO MODE
Select this to playback the contents of the DVD-Video.
2 Press
/
to select a setting, then press
ENTER (OK) to confirm your selection.
Program: Track (except for Picture CD/
MP3/ WMA/DivX®)
1 Press PROG on the remote control.
OR
In [GENERAL SETUP PAGE], press
/
to
highlight [PROGRAM], then press
to select [INPUT
MENU].
2 Press ENTER (OK) to confirm.
Notes
– The DVD-AUDIO indicator lights up when a
DVD-Audio disc is playing.
– When you select DVD-VIDEO MODE, the
DVD-AUDIO indicator goes out.
6
2
7
8
9
10
36
to
UNLOCK
Select this to unlock the disc and allow future playback.
3 Press ENTER (OK) to confirm.
highlight [DVD-AUDIO], then press
/
DVD SETUP MENU OPTIONS
To program your favorite tracks/chapters
3 Use the numeric keypad (0-9) to enter a valid
track/chapter number.
DivX®VOD registration code
4 Use
/
/
/
to move the cursor to the next
position.
– If the track number is more than ten, press a to open
the next page and proceed with programming,
OR
/
/
/
to highlight [NEXT] on the
– Use
program menu, then press ENTER (OK).
5 Repeat steps 3 and 4 to input another track/chapter
number.
To remove a track
7 Press ENTER (OK) to remove this track from the
program menu.
8 To exit the menu, press PROG.
1 In [GENERAL SETUP PAGE], press
/
highlight [DIVX(R) VOD CODE], then press
→ The registration code appears.
2 Press ENTER (OK) to exit.
to
.
3 Use the registration code to purchase or rent the videos
from DivX®VOD service at www.divx.com/vod. Follow
the instructions and download the video onto a CD-R/RW
for playback on this receiver.
Notes
– All the videos downloaded from DivX®VOD can
only be played back on this receiver.
– The time search function is not available during
DivX® movie playback.
5
ON-SCREEN MENU
6 Use
/
/
/
to move the cursor to the
track you want to remove.
Yamaha provides you with the DivX®VOD (Video On
Demand) registration code that allows you to rent and
purchase videos using the DivX®VOD service. For more
information, go to www.divx.com/vod.
OSD language
This menu contains various language options for
displaying languages on the screen. For details, see “Onscreen display (OSD) language” on page 26.
Screen saver
The screen saver helps prevent your TV display from
becoming damaged.
1 In [GENERAL SETUP PAGE], press
to
/
highlight [SCREEN SAVER], then press
.
ON
Select this if you wish to turn off the TV screen when play
is stopped or paused for more than 15 minutes.
OFF
Select this to disable the screen saver function.
2 Press
/
to select a setting and press ENTER
(OK) to confirm.
3 To return to the previous menu, press
.
To exit the menu, press SET UP.
English
37
DVD SETUP MENU OPTIONS
■ Audio setup menu
Night mode
1 In DVD/CD mode, press SET UP.
2 Press
/
to select [AUDIO SETUP PAGE].
3 Press ENTER (OK) to confirm.
When night mode is activated, high volume output is
softened and low volume output raised to an audible level
(for DVD playback only). This is useful for watching your
favorite action movie without disturbing others at night.
1 In [AUDIO SETUP PAGE], press
to
/
highlight [NIGHT MODE], then press
.
AUDIO SETUP PAGE
ON
Playback continues at a more even volume and “NIGHT
ON” appears in the display panel.
SPEAKER SETUP
CD UPSAMPLING
NIGHT MODE
LIP SYNC
OFF
Playback continues with the full dynamic range of
surround sound, and “NIGHT OFF” appears in the display
panel.
2 Press
/
to select a setting and press ENTER
(OK) to confirm.
Speaker setup
This menu contains setup options for audio output so that
you can set your speakers to reproduce high quality
surround sound. For details, see “Setting speaker
channels” on page 27.
CD upsampling
This feature allows you to convert your music CD to a
higher sampling rate using sophisticated digital signal
processing for better sound quality.
If you have activated the upsampling function, the
receiver will automatically switch to stereo mode.
/
highlight [CD UPSAMPLING], then press
to
.
OFF
Select this to disable CD-upsampling.
88.2 kHz (X2)
Select this to convert the sampling rate of CDs to twice
that of the original.
2 Press
/
to select a setting and press ENTER
(OK) to confirm.
Note
If you select “Multi-Channel” mode, the CD
upsampling feature will be cancelled.
38
This function is only available for Dolby Digital.
Lip synchronization
This feature allows you to delay the sound output from the
center speaker in order to synchronize it with the video
image. This may be necessary when using certain LCD
monitors or projectors.
Choices: 0 to 200 ms
1 In [AUDIO SETUP PAGE], press
Note
1 In [AUDIO SETUP PAGE], press
Note
highlight [LIP SYNC], then press
/
to
.
2 Press
/
to adjust the delay time (between 0 ms
and 200 ms) and press ENTER (OK) to confirm.
DVD SETUP MENU OPTIONS
■ Video setup menu
1 In DVD/CD mode, press SET UP.
2 Press
/
to select [VIDEO SETUP PAGE] icon.
3 Press ENTER (OK) to confirm.
VIDEO SETUP PAGE
to
/
highlight [PROGRESSIVE], then press
.
OFF
Select this to disable progressive scan function.
ON
Select this to enable progressive scan function.
2 Press
/
to select a setting and press ENTER
(OK) to confirm.
→ Follow the instructions shown on the TV to
confirm the selection (if any).
– If a blank/distorted TV screen appears, wait for 15
seconds for auto recovery to activate.
Note
If you are changing the setting to OFF by using the remote
control, follow the procedure below.
1 Open the disc tray.
TV type
This menu contains the options for selecting the color
system that matches the connected TV. For details, see
“Selecting the TV type” on page 24.
2 Press
, then press ANGLE.
5
ON-SCREEN MENU
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
COMPONENT
BLACK LEVEL
CLOSED CAPTION
1 In [VIDEO SETUP PAGE], press
Picture settings
Note
TV display
This menu contains the options for matching the aspect
ratio of the receiver to the connected TV. For details, see
“Setting the TV display” on page 25.
This receiver comes with three predefined sets of picture
color settings and one personal setting that you can define
yourself.
1 In [VIDEO SETUP PAGE], press
/
to
highlight [PICTURE SETTING], then press
.
Progressive function
The progressive scan display present 60 complete frames
per seconds, rather than 30 frames per second of interlaced
scanning (ordinary normal TV system). With nearly
double the number of lines, progressive scan offers higher
picture resolution and eliminates bothersome motion
artifacts those jagged edge on moving objects.
Note
Before enabling the progressive scan function, you must
ensure:
1
Turn on your TV progressive scan function (refer to
your TV owner’s manual).
2
You have connected the DVD receiver to your TV
using Y PB PR (see “Connecting a TV” on page 19).
STANDARD
Select this for the standard picture setting.
BRIGHT
Select this to make the TV picture brighter.
SOFT
Select this to make the TV picture softer.
PERSONAL
Select this to personalize your picture color by
adjusting the brightness, contrast, tint and color
(saturation).
2 Press
/
to select a setting and press ENTER
(OK) to confirm.
3 If you selected [PERSONAL], proceed to step 4.
→ The [PERSONAL PICTURE SETUP] menu
appears.
English
39
DVD SETUP MENU OPTIONS
Selecting the black level (U.S. and
Canada models only)
BRIGHTNESS
CONTRAST
TINT
COLOR
4 Press
options.
/
0
0
0
0
to highlight one of the following
BRIGHTNESS
Increase the value to brighten the picture or vice versa.
Zero (0) is the average setting value.
CONTRAST
Increase the value to sharpen the picture or vice versa.
Zero (0) is the average contrast.
TINT
Increase or decrease the value to change the color
phase of the picture. Zero (0) is the average setting
value.
COLOR
Increase the value to enhance the color in your picture
or vice versa. Zero (0) is the average color setting
value.
If you set the TV type to NTSC, set black level shift to
ON. This will improve the color contrast during playback.
The black level setting has no effect if the TV type is set to
PAL.(See “Selecting the TV type” on page 24.)
ON
Select this to enhance the black level.
OFF
Select this for the standard black level setting.
Closed captions
(U.S. and Canada models only)
Closed captions are data hidden in the video signals of
specific discs, and are invisible without the use of a
special decoder. The difference between subtitles and
captions is that subtitles are intended for hearing persons
and captions are for the hearing impaired. Subtitles rarely
show all of the audio. For example, captions show sound
effects (e.g., “phone ringing” and “footsteps”), while
subtitles do not. Before you select this function, please
ensure that the disc contains closed caption information
and your TV set also supports this function.
1 In [VIDEO SETUP PAGE], press
highlight [CLOSED CAPTION], then press
5 Press
/
to adjust the setting that best suits your
personal preference.
ON
To enable the closed caption function.
6 Repeat steps 4 and 5 to adjust other color features if
desired.
OFF
To disable the closed caption function.
7 Press ENTER (OK) to confirm.
Component
(U.K and Europe models only)
This setting allows you to toggle the output of the video
signal between RGB (on SCART) and Y Pb Pr (YUV).
40
/
to
.
2 Press
/
to select a setting, then press ENTER
(OK) to confirm your selection.
DVD SETUP MENU OPTIONS
■ Preference setup menu
1 Press s twice to stop playback (if necessary), then
press SET UP.
2 Press
/
to select the ‘Preference Setup’ icon.
3 Press ENTER (OK) to confirm.
PREFERENCE PAGE
Audio, subtitle and disc menus
These menus contain various language options for the
audio, subtitle and disc menus recorded on the DVD. For
details, see “Audio, Subtitle and Disc menu languages” on
page 26.
Some DVDs may have a parental level assigned to the
complete disc or to certain scenes on the disc. This feature
lets you set a playback limitation level. The rating levels
are from 1 to 8 and are country dependent. You can
prohibit the playing of certain discs that are not suitable
for your children, or play alternative scenes for certain
discs.
1 In [PREFERENCE PAGE], press
highlight [PARENTAL], then press
/
to
.
5
ON-SCREEN MENU
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
VR LIST
PASSWORD
Restricting playback with parental
control
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
VR LIST
PASSWORD
1
2
3
4
5
6
7
8
KID SAFE
G
PG
PG 13
PGR
R
NC 17
ADULT
2 Press
/
to highlight a rating level for the disc
inserted and press ENTER (OK).
3 Use the numeric keypad (0-9) to enter the sixdigit
password (see “Changing the password” on page 43).
→ DVDs that are rated above the level you select
will not play unless you enter the six-digit password.
English
41
DVD SETUP MENU OPTIONS
Rating explanation
1 KID SAFE
2G
– General audience; recommended as acceptable for
viewers of all ages.
3 PG
– Parental guidance suggested.
4 PG13
– Material is unsuitable for children under age 13.
5 PGR
MP3/JPEG navigator
MP3/JPEG navigator can be set only if the disc was
recorded with a menu. It allows you to select different
display menus for easy navigation.
1 In [PREFERENCE PAGE], press
to
/
highlight [MP3/JPEG NAV], then press
.
WITH MENU
Select this to display only the folder menu of the MP3/
Picture CD.
WITHOUT MENU
Select this to display all the files contained in the MP3/
Picture CD.
6R
– Parental guidance - restricted; recommended that
parents restrict children under 17 from viewing, or
allow to view only when supervised by a parent or
adult guardian.
2 Press
/
to select a setting, then press ENTER
(OK) to confirm.
7 NC-17
– Material is unsuitable for children under age 17.
Playback VR format discs
8 ADULT
– Mature material; should be viewed only by adults
due to the inclusion of graphic sexual material,
violence or language.
Notes
– VCD, SVCD, CD have no level indication, so the
parental control function has no effect with these
types of discs. This also applies to most illegal
DVDs.
– Some DVDs are not encoded with a rating though
the movie rating may be printed on the disc cover.
The rating level feature does not prohibit play of
such discs.
PBC
You can set PBC to ON or OFF. This feature is available
only on Video CD 2.0 with the playback control (PBC)
feature. For details, see “Playback control (PBC)” on
page 31.
There are two ways to play back a VR (Video Recording)
format discs: ORIGINAL LIST and PLAY LIST. This
feature is not available with non-VR format discs.
1 In [PREFERENCE PAGE], press
highlight [VR LIST], then press
settings appear:
/
to
. The following
ORIGINAL LIST
Select this to play the originally recorded titles on the
disc.
PLAY LIST
Select this to play the edited version of the disc. This
feature is only available when a play list has been
created.
2 Press
/
to highlight a setting, then press
ENTER (OK) to confirm.
To play back a VR format disc
3 Press SET UP to close the setup menu.
4 Press PLAY. The setting you selected begins to play.
To preview VR format
5 During playback, press SCAN.
6 Press
/
to highlight either [TITLE DIGEST]
or [TITLE INTERVAL].
7 Press ENTER (OK) to confirm.
42
DVD SETUP MENU OPTIONS
TITLE DIGEST
This function will display thumbnails of titles on the
screen. A maximum of six thumbnails are displayed
per page.
→ In ORIGINAL LIST mode, the originally recorded
titles on the disc are displayed.
→ In PLAY LIST mode, every title in the play list is
displayed.
TITLE INTERVAL
This function will divide and display the contents of
each title being played back in regular intervals,
making it easy to preview the recording. A maximum
of six thumbnails are displayed per page.
→ If the title being played back is short, the TITLE
DIGEST function will be performed instead.
2 Press ENTER (OK) to enter the ‘Password Change
Page.
The same password is used for both parental control and
disc lock. Enter your six-digit password to play a
prohibited disc or if prompted
for a password. The default password is ‘000 000’.
5 Enter the new six-digit password a second time to
confirm.
→ The new six-digit password is now valid.
6 Press ENTER (OK) to confirm.
1 In [PREFERENCE PAGE], press
highlight [PASSWORD], then press
[CHANGE].
to
/
to select
Changing the DivX subtitle
If the video donwloaded from DivX®VOD has subtitles,
you can select its character code.
1 In [PREFERENCE PAGE], press
/
highlight [DIVX SUBTITLE], then press
[STANDARD].
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
VR LIST
PASSWORD
5
ON-SCREEN MENU
Changing the password
3 Use the numeric keypad (0-9) to enter your old sixdigit password.
– When doing this for the first time, enter ‘000 000’.
– If you forget your old six-digit password, enter ‘000
000’.
4 Enter the new six-digit password.
to
to select
2 Press ENTER (OK) to confirm.
Note
If you can’t read the subtitle, select [CYRILLIC].
CHANGE
Restoring to the factory defaults
Setting the DEFAULT function will reset all options and
your personal settings to the factory defaults, except your
password for Parental Control and Disc Lock.
1 In [PREFERENCE PAGE], press
highlight [DEFAULT], then press
[RESET].
/
to
to select
2 Press ENTER (OK) to confirm.
→ All settings are reset to the factory defaults.
English
43
TUNER OPERATIONS
TUNER OPERATIONS
Note
Make sure the FM and AM antennas are connected to this
receiver.
■ Tuning radio stations
1 Press TUNER to select “TUNER/FM” or “TUNER/
AM”.
2 Press
/
briefly on the remote control.
→ “SEARCH” appears.
→ The next radio station is tuned automatically.
3 Repeat step 2 (if necessary) until you find the desired
radio station.
4 To tune weak stations, press / briefly and
repeatedly until the optimal reception is found.
If the FM station reception is weak, you can switch the
FM mode from stereo to mono. Press SURR to toggle
through:
DOLBY PL II FM STEREO
→ DOLBY PL II FM MONO
Using Plug and Play
Plug and Play allows you to store all available radio
stations automatically.
1 Press TUNER.
→ “AUTO PRESET” and “PRESS PLAY” appear one
after the other if installation was not completed after
you purchased the DVD receiver.
2 Press
on the front panel to start installation.
→ “AUTO PRESET” appears.
→ Once complete, the last tuned radio station will
play.
→ All available FM stations are stored, followed by
all available AM stations.
To stop installation
Press s.
Automatic presetting
You can start automatic presetting by pressing a selected
preset number.
→ STEREO FM MONO
→ STEREO FM STEREO
POWER
DIMMER
SCAN
PROGRAM
PROG
REPEAT - A - B
TOP MENU/RETURN
You can store up to 20 FM and 10 AM preset radio
stations in this receiver’s memory.
PAGE
SHUFFLE
ON SCREEN
ENTER
SET UP
MENU
■ Presetting radio stations
POWER
Numeric
keypad (0-9)
Note
(U.K. and Europe models only)
While receiving an FM station, the name of the station
you selected appears in the system display panel.
SLEEP
TV
dPRESETu
(b / a)
PRESET
NIGHT
SUBTITLE AUDIO
ANGLE
ZOOM
TRE
TV VOL
TV CH
VOL
BASS
Notes
– The receiver will exit presetting mode if no button
is pressed within 20 seconds.
– If no valid frequency is detected during Plug and
Play, “CHECK ANTENNA” appears.
EFFECT
SURR
TV
INPUT
MUTE
TUNER
TV
AUX
TUNER
DVD/CD
1 Press TUNER to select “TUNER/FM” or “TUNER/
AM”.
2 Press b / a or use the numeric keypad (0-9)
to select a preset number to begin.
44
TUNER OPERATIONS
3 Press and hold PROG until “AUTO PRESET” appears.
→ If a radio station is stored in one of the earlier
presets, the same radio station will not store under
another preset number.
→ If no preset number is selected, automatic preset
will begin from preset (1) and all former presets will
be overridden.
Manual presetting
You can choose to store only your favourite radio stations.
1 Tune the desired radio station (see “Tuning radio
stations” on page 44).
2 Press PROG.
3 Press b / a to select a preset number.
6
4 Press PROG again to store.
OTHER FEATURES
Selecting a preset radio station
Press b / a or use the numeric keypad (0-9) to
select a preset number.
→ The waveband, preset number, then radio frequency
appears.
Deleting a preset radio station
Press and hold s on the front panel until “AM XX
DELTD” or “FM XX DELTD” (XX: preset number) appears.
→ The current preset radio station is deleted.
Setting frequency step
(Asia except Korea model)
The inter-station frequency spacing differs depending on
the areas. Set the frequency step according to the
frequency spacing in your area.
Choices:AM9kHz/FM50kHz, AM10kHZ/FM100kHz
Default setting: AM9kHz/FM50kHz
To change the AM band to 10kHz and the
FM band to 100kHz
1 Unplug the AC power cord from the DVD receiver
and wait at least one minute.
2 While pressing and holding INPUT and b on the
front panel, plug the AC power cord to the DVD
receiver.
3 After “CINEMA STATION” scrolls in the display panel,
release the keys.
English
Note
Repeat the above steps 1 to 3 to change AM band to 9kHz
and FM band to 50kHz.
45
SOUND CONTROLS
SOUND CONTROLS
■ Selecting digital sound effects
Note
For proper surround sound, make sure the speakers and
subwoofer are connected to this receiver (see “Connecting the
subwoofer” on page 17).
PRESET
NIGHT
SUBTITLE AUDIO
ANGLE
ZOOM
TRE/BASS
TRE
TV VOL
TV CH
VOL
VOL (+/–)
BASS
EFFECT
EFFECT
SURR
TV
INPUT
MUTE
SURR
TV
AUX
TUNER
DVD/CD
■ Selecting surround sound
– Press SURR on the remote control to select:
MULTI-CHANNEL or STEREO.
– The availability of the various surround sound modes
depends on the number of speakers used and the sound
available on the disc.
– The center and surround speakers operate only in
multi-channel surround mode.
– Stereo broadcasts or recordings produce some
surround channel effects when played in a surround
mode. However, mono (single channel sound) sources
do not produce any sound from the surround speakers.
Note
The surround sound mode cannot be selected if the system
setup menu is selected.
46
You can select preset digital sound effects that match the
content of your disc, or that optimize the sound of the
musical style you are playing.
Press EFFECT to select from the available sound
effects.
When playing movie discs or while in TV mode, you
can select:
CONCERT, DRAMA, ACTION or SCI-FI.
When playing music discs or while in TUNER or AUX
mode, you can select:
ROCK, DIGITAL, CLASSIC or JAZZ.
Notes
– Digital sound effects and the treble/bass features
cannot be activated at the same time.
– For flat sound output, select CONCERT or
CLASSIC.
■ Adjusting the treble/bass level
The TREBLE (high tone) and BASS (low tone) features
enable you to define the sound-processor settings.
1 Press TRE or BASS on the remote control.
2 Within five seconds, press VOL (+/–) to adjust the
treble or bass level (MIN, –2, –1, 0, +1, +2 or MAX).
→ If the volume control is not used within five
seconds, it will resume its normal volume control
function.
SOUND CONTROLS
■ Adjusting the volume level
Use the VOLUME control (or press VOL (+/–) on the
remote control) to increase or decrease the volume
level.
→ “VOL MIN” is the minimum volume level and
“VOL MAX” is the maximum volume level.
To mute the volume temporarily
Press MUTE on the remote control.
– Playback continues without sound and “MUTE”
appears.
– To restore the volume, press MUTE again or
increase/decrease the volume level.
– Press AUX repeatedly on the remote control to select
the appropriate active mode.
Each time you press AUX, the front display changes as
follows;
AUX/ANALOG
AUX/DIGITAL
■ Switching to standby mode
Press STANDBY/ON on the front panel or POWER
(
) on the remote control.
→ The display screen goes blank.
■ Night listening mode
When night listening mode is activated, high volume
output is softened and low volume output raised to an
audible level (for DVD playback only). This is useful for
watching your favorite action movie without disturbing
others at night.
This function is only available for Dolby Digital.
– Press NIGHT on the remote control to activate the
night listening mode.
→ Playback continues at a more even volume and
“NIGHT ON” appears in the display panel.
– To restore the volume, press NIGHT again.
→ Playback continues with the full dynamic range of
surround sound, and “NIGHT OFF” appears in the
display panel.
6
OTHER FEATURES
■ Switching to active mode
– Press TUNER repeatedly on the remote control to
select the appropriate active mode.
Each time you press TUNER, the front display
changes as follows:
TUNER/FM
TUNER/FM
English
47
OTHER FUNCTIONS
OTHER FUNCTIONS
■ Setting remote control codes
■ Controlling other components
Once you set the appropriate remote control codes, you
can use this remote to control your other components. The
remote control automatically switches to the appropriate
control mode for that component.
You can operate other components if you have set the
remote control code for your component in the remote
control. Note that some buttons may not correctly operate
the selected component.
POWER
DIMMER
SLEEP
POWER
SCAN
PAGE
TV operations
TV
PROG
PROG
REPEAT - A - B
TOP MENU/RETURN
Numeric
keypad (0-9)
Press TV for TV operations.
SHUFFLE
ON SCREEN
POWER (TV)
ENTER
POWER
DIMMER
SLEEP
POWER
SCAN
PAGE
TV
SET UP
MENU
PROG
PRESET
REPEAT - A - B
TOP MENU/RETURN
Numeric
keypad (0-9)
SHUFFLE
ON SCREEN
NIGHT
SUBTITLE AUDIO
ANGLE
ZOOM
ENTER
TRE
TV VOL
TV CH
VOL
SET UP
MENU
BASS
EFFECT
SURR
TV
INPUT
TV
MUTE
AUX
PRESET
TV
AUX
TUNER
DVD/CD
NIGHT
SUBTITLE AUDIO
TV VOL (+/–)
ANGLE
ZOOM
TV CH (+/–)
TRE
TV VOL
TV CH
VOL
BASS
TV INPUT
EFFECT
SURR
AUX
TUNER
TV
INPUT
TV
MUTE
DVD/CD
For TV, you can set a TV remote control code and for
AUX, you can set a cable or satellite tuner remote control
code.
1 Press and hold TV or AUX.
2 Press PROG, then release both keys.
3 Press the numeric keypad (0-9) to enter the 4 digit
remote control codes (see “LIST OF REMOTE
CONTROL CODES” at the end of this manual).
4 Press PROG again to store.
Functions for TV operation
POWER (TV)*
Turns on the TV, or sets it to the standby mode.
TV VOL (+/–)*
Adjusts the TV volume level.
TV INPUT*
Switches the TV inputs.
Numeric keypad (0-9)
Enters a number of a TV channel.
TV CH (+/–) *
Switches TV channels.
* You can also operate these functions in DVD/ CD or
TUNER mode.
48
OTHER FUNCTIONS
Cable and satellite tuner operations
Press AUX for the cable and satellite tuner operations.
POWER (TV)
POWER
DIMMER
SLEEP
POWER
SCAN
PAGE
TV
PROG
REPEAT - A - B
TOP MENU/RETURN
Numeric
keypad (0-9)
SHUFFLE
ON SCREEN
ENTER (OK)
ENTER
SET UP
MENU
PRESET
NIGHT
SUBTITLE AUDIO
ANGLE
ZOOM
TV CH (+/–)
TRE
TV VOL
TV CH
VOL
BASS
EFFECT
SURR
AUX
TUNER
TV
INPUT
TV
MUTE
DVD/CD
■ Setting the sleep timer
The sleep timer switches the receiver to Eco Power
standby mode automatically at the preset time.
1 Press SLEEP on the remote control until “SLEEP XX”
appears in the display panel (XX: 15, 30, 45, 60 or
OFF).
2 To select the next sleep timer value, continue pressing
SLEEP while in sleep timer mode until the desired
turn-off time is displayed.
→ “SLEEP” appears in the display panel, except when
“SLEEP OFF” is selected.
→ Before the receiver switches to Eco Power standby
mode, a countdown of 10 seconds is displayed.
“SLEEP 10” → “SLEEP 9”.... →
“SLEEP 2” → “SLEEP 1”
6
To cancel the sleep timer
Functions for cable and satellite tuners
POWER (TV)
Turns on the cable and satellite tuner, or sets them to the
standby mode.
ENTER (OK)
Confirms a selection.
Numeric keypad (0-9)
Cable: enters a number of a cable channel.
Satellite tuner: enters a number of a preset radio station.
TV CH (+/–)
Switches the cable or satellite tuner channel.
■ Dimming the display screen
In any active mode, press DIMMER on the remote control
to select the desired brightness:
DIM 1: 70% brightness
DIM 2: 40% brightness
DIM OFF: normal brightness
■ Recording on an external AV
component
1 Connect the external recording component to LINE
OUT (see “Connecting external AV components” on
page 21).
OTHER FEATURES
Press SLEEP until “SLEEP OFF” appears.
2 Select the source to record from this DVD receiver
(DVD/CD, TUNER, TV or AUX) and start playback
(if necessary).
3 Start recording on the external recording device.
Note
Refer to the owner’s manual of the connected
component for details.
English
49
TROUBLESHOOTING
TROUBLESHOOTING
If there is any problem with your CinemaStation system, check the following items. If you cannot solve your problem
with the following remedies or if your problem is not listed below, turn off and unplug the CinemaStation, then
consult the nearest authorized YAMAHA dealer or service center.
Problem
No power
Solution
Check if the AC power cord is properly connected.
Press STANDBY/ON on the front of the receiver to turn on the power.
No picture
Refer to your TV’s manual for correct Video In channel selection. Change
the TV channel until you see the DVD screen.
Press DVD/CD on the remote control in order to switch to DVD/CD mode.
Completely distorted picture or
black/white picture
If this happens when you are changing the setting of the ‘TV TYPE’, wait
for 15 seconds for auto recovery.
If this happens when you are turning on the progressive scan feature, wait
for 15 seconds for auto recovery.
Check the video connection.
Sometimes a small amount of pisture distortion may appear.
This is not a malfunction.
Clean a disc.
The aspect ratio of the screen cannot be charged
even though you have set the TV display
The aspect ratio is fixed on the DVD disc.
No sound or distorted sound
Adjust the volume.
Depending on the TV, it may not be possible to change the aspect ratio.
Check if the system cable is properly connected.
Check if all speaker cables are properly connected.
Make sure that the audio cables are connected and press the Input selection
buttons to select the correct input source (TV or AUX, for example) to
choose the equipment that you want to hear through the DVD receiver.
Check if the AC power cord of the subwoofer is properly connected.
Make sure that you use a disc supported by the DVD Player.
No sound or picture
Check that the RGB/SCART cable is connected to the correct device (see
“Connecting a TV” on page 19).
Sound is too low on one side
Check if all cables are properly connected.
Cannot activate some features such as Angles,
Subtitles, or multi-language Audio
The features may not be available on the DVD.
DVD videos cannot be copied with the VCR
Most commercially available DVD’s include copy protect features. You
cannot make a copy of these DVD’s.
The disc is ejected without an operation
Make sure that you use a disc supported by the DVD receiver.
Not able to select some items in the setup/system
menu
Press STOP twice before selecting the setup/system menu.
The DVD receiver does not start playback
Insert a readable disc with the playback side facing down. The DVD-R/
DVD+R/DVD-RW/DVD+RW/CD-R/CD-RW/DVD-RW (VR format)
must be finalized.
Changing the language for the sound or subtitle is prohibited on the DVD.
Depending on the disc availability, some menu items cannot be selected.
Check the disc type, color system (PAL or NTSC) and region code.
Check for any scratches or smudges on the disc.
Press SET UP to turn off the setup menu screen.
You may need to enter the password in order to change the parental control
rating level or to unlock the disc for playback.
Moisture has condensed inside the player. Remove the disc and leave the
receiver turned on for about an hour.
50
TROUBLESHOOTING
Problem
Solution
Sound played on the DVD receiver cannot be
recorded with an external recorder
Use proper audio sources.
Sounds played on the AV equipment connected to
the DVD receiver cannot be recorded with external
recording equipment
Connect those equipment to the DVD receiver with along connections.
The volume does not increase or sounds are
distorted
Turn on the power of the component connected to the DVD receiver.
There is no sound from the center, surround
speakers and subwoofer
Make sure the center, surround speakers and subwoofer are connected correctly.
Adjust the volume level in the setup menu.
Press SURR button to select a correct surround sound setting.
Make sure the source you are playing is recorded or broadcast in surround
sound (DTS, Dolby Digital, etc.).
“SPEAKER ERR” appears in the display panel
Unplug the subwoofer, then make sure the front, center and surround speakers
are connected correctly.
Radio reception is poor
If the signal is too weak, adjust the antenna or connect an external antenna for
better reception.
Increase the distance between the receiver and your TV or VCR.
Tune in to the correct frequency.
Place the antenna farther away from any equipment that may be causing the
noise.
The remote control does not function properly
6
OTHER FEATURES
Set the DVD receiver to the standby mode, then disconnected the power cord.
Wait for about 30 seconds, then reconnect the power cord and turn on the DVD
receiver.
Select the source (DVD/CD or TUNER, for example) before pressing the
function button (h, b / a).
Reduce the distance between the remote control and the receiver.
Replace the batteries with new ones.
Point the remote control directly toward the remote control sensor.
Check that the batteries are loaded correctly.
The remote control does not work for operating
other equipment
Set the correct remote control code. Depending on the model and year of the
product, the DVD receiver’s remote control may not be able to operate it partly
or wholly. In this case, use the remote control supplied with each product.
Unable to play DivX® movies
Check that the DivX® file was encoded in ‘Home Theater’ mode with a DivX®
5.x encoder.
The DVD receiver does not work
Disconnect the power cord from the power outlet for a few minutes. Reconnect
the power cord and try to operate again as usual.
English
51
GLOSSARY
GLOSSARY
Analog
Dolby Digital
Sound that has not been turned into numbers.
Analog sound varies, while digital sound has specific
numerical values. These jacks send audio through two
channels, the left and right.
Digital surround sound system which is developed by
Dolby Laboratories provides completely independent
multi-channel audio. With 3 front channels (left, center,
and right) and 2 surround stereo channels, Dolby Digital
provides five full-range audio channels. With an
additional channel especially for bass effects (called
LFE, or low frequency effect), the system has a total of
5.1-channels (LFE is counted as 0.1 channel). By using
2-channel stereo for the surround speakers, more
accurate moving sound effects and surround sound
environment are possible than with Dolby Surround.
Aspect ratio
The ratio of vertical and horizontal sizes of a displayed
image. The horizontal vs. vertical ratio of conventional
TVs. is 4:3, and that of wide-screens is 16:9.
Bit
Short for binary digit. Represents the smallest unit of
information manipulated on a computer. In audio
systems, the bit size determines resolution to digitize
analog signals.
The larger the bit size, the larger the dynamic range (the
ratio of maximum and minimum frequency level) and
the finer the sounds. Generally, an audio CD is 16 bit
and DVD audio is 24 bit.
Bit rate
The amount of data used to hold a given length of
music; measured in kilobits per second, or kbps. Also,
the speed at which you record. Generally, the higher the
bit rate, or recording speed, the better the sound quality.
However, higher bit rates use more space on a disc.
COMPONENT VIDEO OUT
Jacks for inputting or outputting a component video
signal.Component video signal consists of three lines,
the luminance signal (Y) and two color difference
signals (PB/CB, PR/CR), which enable to provide highquality video.
Disc menu
A screen display prepared for allowing selection of
images, sounds, subtitles, multi-angles, etc. recorded on
a DVD.
DivX
DivX® is a video compression technology developed by
DivX®Networks, Inc. It compresses digital video data to
sizes small enough to be transported over the Internet
without reducing the original video quality. You need
DivX codec software to play back DivX movies or
convert data to the DivX format.
Dolby Surround Pro Logic II
It is an improved matrix decoding technology that
provides better spatiality and directionality on Dolby
Surround programme material; provides a convincing
three-dimensional soundfield on convertional stereo
music recordings; and is ideally suited to bring the
surround experience to automotive sound. While
conventional surround programming is fully compatible
with Dolby Surround Pro Logic II decoders,
soundtracks will be able to be encoded specifically to
take full advantage of Pro Logic II playback, including
separate left and right surround channels. (Such material
is also compatible with conventional Pro Logic
decoders).
DTS (Digital Theater Systems)
Digital surround sound system developed by Digital
Theater Systems, Inc., which provides 5.1 channel audio
(max). With an abundance of audio data, it is able to
provide authentic-sounding effects.
Interlace
The most common type of scanning used in televisions.
It divides a screen into even and odd numbered fields for
scanning, and then builds an image by combining them
into one image (frame).
JPEG (Joint Photographic Expert Group)
A standardized image compression system proposed by
the Joint Photographic Expert Group. It can reduce
image data sizes to 1 to 10% of their original sizes, and
works on digital photographs effectively.
MP3 (MPEG Audio Layer-3)
An audio file compression technology. It can reduce
audio data sizes to about 10% of their original sizes
while maintaining CD-level audio quality.
MPEG (Moving Pictures Experts Group)
International standard for digital video and audio
compression generated by ISO (International
Organization for Standardization) and IEC
(International Electrotechnical Commission).
Includes MPEG-1, MPEG-2, and MPEG-3. MPEG-1
offers VHS level video quality and is often used on
video CDs. MPEG-2 offers S-VHS level video quality
and is often used on DVDs.
52
GLOSSARY
Parental control
Limits Disc play according to the age of the users or the
limitation level in each country. The limitation varies
from disc to disc; when it is activated, playback will be
prohibited if the software’s level is higher than the userset level.
Playback control (PBC)
An on-screen menu recorded on a Video CD or SVCD
that enables interactive playback and searching.
Progressive Scan
A method of displaying all scanning lines in a frame at
once, reducing flicker noticeable on a larger screen and
creating a sharp and smooth image.
Region code
Many DVD discs include a region code so that the
copyright owner can control DVD software distribution
only to regions where they are ready to distribute. There
are six regions codes, which restrict a DVD player to
playing a DVD disc with the same region code.
6
S-video output
OTHER FEATURES
A jack for inputting or outputting an S-video signal.
S-video signal consists of two lines, the luminance
signal (Y) and color signal (C), which enable to provide
high-quality video during playback or recording.
Super Audio CD
This audio format is based upon the current CD
standards but includes a greater amount of information
that provides higher quality sound. There are three types
of discs: single layer, double layer and hybrid discs. The
hybrid disc can be played on existing CD players as well
as Super Audio players since it contains both standard
audio CD and Super Audio CD information.
Surround
A receiver for creating realistic three-dimensional sound
fields full of realism by arranging multiple speakers
around the listener.
VR format (Video Recording format)
A DVD video recording format, which allows editing
DVD video data recorded onto a disc. You need a VR
format compatible player for playback.
English
53
SPECIFICATIONS
SPECIFICATIONS
DVD RECEIVER DVX-S300
TUNER SECTION
FM Tuning Range
87.50 to 108.00 MHz
AM Tuning Range
- Canada model
530 to 1700 kHz
- Europe, U.K., Australia and Korea models
531 to1602 kHz
- Taiwan and Asia models 531 to 1602 kHz/530 to 1700 kHz
RGB (SCART) output
Component Video Output
Audio DAC
Frequency Responce
Audio S/N
Distortion
Dynamic Range
Semiconductor
12 cm/8cm
MPEG-1 /MPEG-2/DivX 3.11, 4.x & 5.x
12 bits/108 MHz
PAL/NTSC
4:3/16.9
1.0 Vp-p, 75 ohm
Y - 1.0 Vp-p, 75 ohm
C - 0.3 Vp-p, 75 ohm
0.7 Vp-p, 75 ohm
Y - 1.0 Vp-p, 75 ohm
PB/CB PR/CR – 0.7 Vp-p, 75 ohm
24 bits/192 kHz
4 Hz – 20 kHz (44.1 kHz)
4 Hz – 22 kHz (48 kHz)
4 Hz – 44 kHz (96 kHz)
105 dB
0.0035%
95 dB
AUDIO FORMAT
Digital
Dolby Digital/DTS/MPEG Compressed Digital
PCM
16, 20, 24 bits
fs 44.1, 48, 88.2, 96, 176.4, 192 kHz
MP3 (ISO 9660)
24, 32, 56, 64, 96, 128, 256 kbps
fs 16, 22.05, 24, 32, 44.1, 48 kHz
WMA
32 to 192 kbps, mono, stereo
Full decoding of Dolby Digital and DTS multi-channel sound
Dolby Surround Compatible Downmix from Dolby Digital
multi-channel sound
Dolby Pro Logic II
GENERAL
Power Supply
- Canada model
- Australia model
- Europe and U.K. models
- Taiwan model
- Asia model
- Korea model
Power Consumption
Frequency Response
120 V, 60 Hz
240 V, 50 Hz
230 V, 50 Hz
110–120 V, 50/60 Hz
220–240 V, 50/60 Hz
220 V, 60 Hz
15W
20 Hz to 20 kHz/–3 dB
(Front, Center, Surround)
> 95 dB
Signal-to-Noise Ratio
Input Sensitivity
- AUX In, TV In
300 mV
- SCART In
(Europe and U.K. models only)
500 mV
Dimensions (W x H x D)
360 x 53 x 310 mm
Weight
2.7 kg
54
NX-C301
System
Impedance
Speaker Drivers
Frequency Response
Dimensions (W x H x D)
Weight
2-way system
6Ω
7.0 cm woofer x 2 + 1.9 cm tweeter
100 Hz – 20 kHz
300 x 84 x 78 mm
1.0 kg
NX-C302
DISC SECTION
Laser Type
Disc Diameter
Video Decoding
Video DAC
Signal System
Video Format
Composite Video Output
S-video Output
CENTER SPEAKER
System
Impedance
Speaker Drivers
Frequency Response
Dimensions (W x H x D)
Weight
Full range system
6Ω
5.0 cm Full range x 3
100 Hz – 20 kHz
328 x 98 x 64 mm (with stand)
0.7 kg
FRONT AND SURROUND SPEAKERS
NX-S301
System
Impedance
Speaker Drivers
Frequency Response
Dimensions (W x H x D)
Weight
2-way system
6Ω
7.0 cm woofer + 1.9 cm tweeter
100 Hz – 20 kHz
83 x 181 x 78 mm
0.6 kg
NX-S302
System
Impedance
Speaker Drivers
Frequency Response
Dimensions (W x H x D)
Weight
Full range system
6Ω
5.0 cm Full range + 2.5 cm piezo tweeter
100 Hz – 20 kHz
210 x 994 x 210 mm (with stand)
3.0 kg
SPECIFICATIONS
SUBWOOFER
NX-SW301
NX-SW300
Power Supply Rating
- Canada model
- Australia Model
- Europe and U.K. models
Power Supply Rating
- Taiwan model
- Asia model
- Korea model
Power Consumption
System
Impedance
Speaker Driver
Frequency Response
Dimensions (W x H x D)
Weight
110–120 V, 50/60 Hz
220–240 V, 50/60 Hz
220 V, 60 Hz
360 W
Bass Reflex System
6Ω
16 cm woofer
40 Hz – 100 Hz
178 x 402 x 461 mm
12 kg
Amplifire Section
Output Power
- Front
- Surround
- Center
- Subwoofer
150 W (10% THD, 1 kHz)/channel
150 W (10% THD, 1 kHz)/channel
150 W (10% THD, 1 kHz)
150 W (10% THD, 100 Hz)
- Taiwan model
- Asia model
- Korea model
Power Consumption
System
Impedance
Speaker Driver
Frequency Response
Dimensions (W x H x D)
Weight
120 V, 60 Hz
240 V, 50 Hz
230 V, 50 Hz
110–120 V, 50/60 Hz
220–240 V, 50/60 Hz
220 V, 60 Hz
200 W
Bass Reflex System
6Ω
16 cm woofer
40 Hz – 100 Hz
200 x 390 x 382 mm
11.5 kg
Amplifire Section
75 W (10% THD, 1 kHz)/channel
75 W (10% THD, 1 kHz)/channel
75 W (10% THD, 1 kHz)
75 W (10% THD, 100 Hz)
6
OTHER FEATURES
Output Power
- Front
- Surround
- Center
- Subwoofer
Specifications subject to change without prior notice.
English
55
09_Code_DVX-C300_CA.fm Page ii Wednesday, June 8, 2005 1:10 PM
LIST OF REMOTE CONTROL CODES
LISTE DES CODES DE COMMANDE
TV
Yamaha
Admiral
Aiko
Akai
Alba
AOC
Audiovox
Belcor
Bell & Howell
Blaupunkt
Blue sky
Bradford
Brandt
Brokwood
Bush
Candle
Clatronic
Contec
Craig
Croslex
Crown
Curtis Mathis
CXC
Daewoo
Daytron
Dual
Dumont
Emerson
Envision
Ferguson
First line
Fisher
Funai
Futuretec
GE
Gibralter
LG/Goldstar
Goodmans
Grundig
Harvard
Hitachi
ICE
Itt/Nokia
JC Penny
JVC (Victor)
Kendo
Kenwood
KTV
Loewe
Magnavox
Marantz
Matsui
MGA
Mitsubishi
MTC
Multitec
NEC
Nikko
Nokia
Nordmende
NTC
Oceanic
Onwa
Panasonic
Philco
Philips
1009, 1011, 1036, 1068
1033, 1080
1032
1011
1005, 1013, 1014, 1064, 1076
1009, 1011
1032, 1053, 1079, 1083
1009
1007, 1039
1055, 1056, 1059, 1082
1064
1053
1035, 1057, 1058
1009
1005, 1013, 1014, 1064, 1070, 1072, 1076, 1077
1011, 1021
1030, 1067, 1075
1053
1043, 1053
1020
1016, 1053, 1078
1007, 1011, 1016, 1017, 1018, 1020, 1021, 1022
1053
1009, 1016, 1023, 1032, 1039, 1079, 1083, 1084
1009
1063
1008, 1009
1009, 1015, 1016, 1039, 1050, 1051, 1052, 1053, 1065,
1070,1080, 1083, 1084
1011
1004, 1014, 1028, 1035, 1054, 1066, 1071
1005, 1062, 1063, 1067, 1072, 1074
1039
1048, 1052, 1053, 1069
1053
1010, 1017, 1018, 1033, 1051, 1070, 1079, 1088, 1090
1008, 1009, 1011
1002, 1003, 1009, 1011, 1014, 1016, 1021, 1052
1013, 1014, 1027, 1063, 1076, 1077
1026, 1055, 1056, 1082
1024, 1053
1015, 1021, 1036
1063, 1069, 1076
1044
1003, 1009, 1010, 1011, 1016, 1017, 1018, 1021, 1022,
1040, 1051, 1090
1013, 1019, 1025, 1042
1014
1009, 1011
1011, 1016, 1053
1029
1011, 1013, 1020, 1052
1011, 1014, 1020
1005, 1012, 1013, 1014, 1027, 1060, 1063, 1072, 1076
1009, 1011, 1037, 1049
1009, 1033, 1034, 1038, 1081
1009, 1011, 1021, 1022, 1062, 1081
1053
1009, 1011, 1013, 1021, 1047
1011, 1032, 1051
1044
1035, 1057, 1058, 1071
1062
1044, 1061
1053
1018, 1043, 1068, 1086
1009, 1011, 1020, 1036, 1080
1014, 1020
Pilot
Pioneer
Portland
Quasar
Radio Shack
RCA
Realistic
SABA
Sampo
Samsung
Sanyo
Schneider
Scott
Sharp
Shogun
Siemens
Signature
Sony
Soundesign
Starlite
Sylvania
Telefunken
Thomson
Toshiba
Videch
Wards
1009, 1011, 1016
1015, 1046, 1049, 1085, 1086
1009, 1016, 1032
1018, 1045, 1068
1009, 1011, 1016, 1017, 1021, 1038, 1044, 1049, 1051
1009, 1015, 1017, 1018, 1031, 1033, 1087, 1088, 1089,
1090, 1091
1009, 1011, 1016, 1021, 1039, 1045, 1051, 1053
1029, 1035, 1044, 1057, 1058, 1071
1011, 1016
1009, 1011, 1014, 1021, 1022, 1031, 1051
1039, 1060, 1079
1014, 1064, 1067, 1073, 1076
1009, 1051, 1052, 1053, 1065
1016, 1033, 1045
1009
1014, 1041, 1055, 1056, 1059, 1082
1007
1001, 1006
1051, 1052, 1053
1053
1011, 1020
1021
1035, 1057, 1058, 1071
1012, 1013, 1022, 1039, 1040
1009, 1013, 1051
1007, 1009, 1010, 1011, 1020, 1021, 1045, 1051, 1052
CABLE
ABC
3002, 3003, 3004, 3006, 3008
Andover
3037
Bell & Howell 3006
Birgmingham Cable 3020
Communication
British Telecom 3002, 3012
Cabletime
3016, 3019, 3025, 3029
Contec
3009
Clyde
3011
Cryptovision
3038
Daehan
3043
Daeryung
3003
Decsat
3027
Everquesst
3007
Filmnet
3028
France Telecom 3030
GEC
3011
Gemini
3007
General Instrument3004, 3020, 3031, 3046
Goldstar
3014, 3047
Grundig
3035
Hamlin
3052, 3067, 3050, 3057, 3068
Hitachi
3004
Jasco
3007
Jerrold
3002, 3004, 3005, 3006, 3007, 3020, 3031, 3046
LG Alps
3044
Magnavox
3055, 3071
Memorex
3001
Mnet
3009, 3028
Motorola
3074, 3075, 3076 3077, 3078, 3079, 3080, 3081, 3082,
3083, 3084, 3085, 3086, 3087, 3088, 3089, 3090, 3091
Now
3041
Oak
3009
Pacific
3039
Panasonic
3001, 3013
Paragon
3001
Philips
3061, 3054, 3055, 3056, 3065, 3069, 3071
Pulsar
3001
Pioneer
3010, 3014, 3018, 3036
PVP Stereo
3002
ii
09_Code_DVX-C300_CA.fm Page iii Wednesday, June 8, 2005 1:10 PM
Visual Matrix
Quasar
Radio Shack
Rembrandt
Runco
Salora
Samsung
Satbox
Scientific
Scientific Atlanta
Seawoo
Signal
Signature
Starcom
Stargate
Starquest
STS
Taihan
Teleservice
Tele+1
Tudi
Tusa
Tocom
Tongkook
Toshiba
United Cable
Universal
Videoway
Viewstar
Visicable+
Westminster
Wolsey Gene
Zenith
3001
3051, 3070 3072 3073
3004
3001
3026
3014, 3040
3024
3003, 3032, 3049
3003, 3008, 3021
3045
3007
3004
3002, 3007
3007
3007
3015
3043
3022
3028
3023
3007
3005
3042, 3048
3001
3002
3061, 3053, 3060, 3062, 3063
3017
3059, 3055, 3058, 3064, 3066
3033
3012
3037
3001, 3034
SATELLITE TUNER
Absat
AST
Alba
Aldes
Amstrad
Ankard
Anttron
Armstrong
Astra
Astro
Avalon
Axis
Beko
Best
Blaupunkt
Boca
Brain Wave
British Sky
Broadcasting
BT
Bush
CNT
Cambridge
Canal Satellite
Canal+
Channel Master
Comlink
Connexions
Crown
Cyrus
D-Box
DDC
DNT
Echostar
Emanon
Ferguson
Fidelity
Finlux
Fracarro
iii
4006
4027
4029, 4034, 4037, 4052
4019
4003, 4016, 4025, 4038, 4039, 4042
4013, 4019, 4030, 4044
4009, 4034
4015
4005
4008, 4039, 4045
4031
4030, 4046
4010
4030
4008
4015, 4043
4022
4058
4053
4002
4045
4024
4059
4059
4029
4019
4031
4015
4011
4054
4029
4011, 4031
4031, 4036, 4061
4034
4002, 4009, 4010, 4023
4016
4005, 4024, 4032, 4037
4061
Freecom
Fujitsu
FTE Humax
Fube
G-sat
Galaxis
General Instrument
Gold Box
Gooding
Goodmans
Grundig
Hinari
Hirschimann
Hitachi
Houston
Hughes
Huth
ITT
Invideo
Intervision
Johansson
JVC
Kathrein
Kreiselmeyer
Kyostar
La Sat
Lenco
Lennox
Lupus
Luxor
Magnavox
Manhattan
Marantz
Maspro
Matsui
Mediasat
Mediamarkt
Minerva
Morgan’s
Navex
Neuhaus
Neusat
Newhaus
Nikko
Nokia
Nordmende
Orbitech
Oxford
Pace
Palladium
Palsat
Panda
Panasonic
Philips
Phonotrend
Pioneer
Planet
Promax
Prosat
Quadral
Radio shack
Radiola
Radix
RCA
RFT
Saba
Sabre
Sagem
Salora
Samsung
SAT
Satcom
Satec
Satmaster
Satpartner
4034
4094 4012
4060
4030, 4031, 4034
4009
4019, 4057, 4060
4085, 4080, 4069, 4082, 4083, 4092
4059
4048
4010
4008, 4010, 4048
4009
4008, 4032, 4039, 4040, 4049
4037
4053
4088
4013, 4015, 4019, 4026
4005
4061
4050
4022
4048
4004, 4006, 4008, 4011, 4035, 4041
4008
4034
4043, 4045
4034
4050
4030
4005, 4049
4087
4037, 4045, 4050
4011
4004, 4023
4024, 4048
4059
4015
4048
4015, 4043
4022
4039
4057
4013
4028
4005, 4032, 4037, 4049, 4054, 4063
4029
4039
4024
4002, 4009, 4014, 4023, 4037, 4055, 4058
4048
4039
4037
4086, 4077
4007, 4011, 4020, 4037, 4048, 4059
4019, 4050
4021, 4059
4061
4037
4019
4029, 4044
4083
4011
4031, 4064
4084, 4076, 4090
4011, 4013, 4019
4023, 4045
4037
4056
4005
4066, 4067, 4068
4027, 4038
4026, 4051
4009
4026
4022, 4034, 4040, 4045
09_Code_DVX-C300_CA.fm Page iv Wednesday, June 8, 2005 1:10 PM
Schwaiger
4009, 4041
Seemann
4031, 4046
SEG
4030, 4034
Siemens
4008
Skymaster
4019, 4044, 4051
Sony
4017, 4018
Strong
4062
Sunstar
4043
Tantec
4023, 4037
Technisat
4001, 4039
Techniland
4026
Telefunken
4034
Teleka
4015, 4052
Telesat
4051
Thomson
4037, 4059
Tonna
4026, 4053
Toshiba
4089, 4071, 4075
TPS
4056
Triad
4027
Triasat
4040
Uniden
4093, 4070, 4073, 4074, 4078, 4079, 4081, 4083
Unitor
4022, 4008, 4049
Universum
4011
Ventana
4034
Vortec
4027
Vtech
4022
Winersat
4008, 4027, 4031, 4037
Wisi
4033, 4045, 4047
Xsat
4006, 4065
Xcom Multimedia 4065
Zehnder
4033, 4045, 4047
Zenith
4071, 4072, 4091
iv
DVX-S300_CA_cv.fm Page 1 Tuesday, June 7, 2005 2:56 PM
CA
DVX-S301/DVX-S302/DVX-S303
© 2005
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
All rights reserved.
Printed in China
3139 246 16151
OWNER’S MANUAL
MODE D’EMPLOI