Zanussi CH 6029 GR Instruction Manual

INSTRUCTION BOOKLET
INTEGRATED
COOKER HOOD
CH 6029 GR
Thank you for buying a Zanussi product.
To enable you to use your appliance effectively and safely, please read this instruction book carefully before using
the appliance and retain for future reference. If you require guidance in the use of the appliance or require further
information on Zanussi Products, please contact our Customer Care Department. For general enquiries concerning
your Zanussi appliance or for further information, visit our website at http:\\www.zanussi.co.uk
Customer Care Department
Zanussi
55-77 High Street
Slough
Berkshire
SL1 1DZ
Tel:
Fax:
08705 727727(*)
01753 538972
* calls to this number may be recorded for training purposes.
To register ownership, please ensure you complete and return the guarantee card supplied with the appliance.
For the User
For the Installer
Important Safety Information
Installation Instructions
Technical Information
Your Appliance
Electrical Connections
Cooker Hood Controls
To Operate
Recirculation
Extraction
Electrical Requirements
Electrical Connection
Installing the Cooker Hood
Installation Requirements
Ducting
Clearance Height
Unpacking
Fixing the Cooker Hood into the Housing Canopy
Positioning of the Cooker Hood
Venting
Recirculation Mode
Inserting The Charcoal Filters
Extraction Mode
Ducting
Maintenance and Cleaning
External Cleaning
Charcoal Filters
To Remove the Charcoal Filters
Synthetic Grease Filter
To Remove the Grease Filter
Changing the Light Bulb
Something Not Working
Service and Spare Parts
Peace of Mind for Twenty Four Months
Standard Guarantee Conditions
Guide to use the instruction book
The following Symbols will be found in the text to guide you through the instruction book
Safety instructions
Step by step instructions
2
IMPORTANT SAFETY INFORMATION
These warnings are provided in the interests of your safety. Ensure that you understand them
all before installing or using this appliance. Your safety is of paramount importance. If you are
unsure about any of the meanings of these warnings contact the Customer Care Department.
■
• If other types of flue or appliances are fitted
ensure that there is an adequate supply of air
to the room.
Installation
• Any installation work must be undertaken by
a qualified electrician or a competent
person.
• The ducting system for this appliance must
not be connected to any existing ventilation
system which is being used for any other
purpose.
• This hood must be installed in accordance
with the installation instructions and all
measurements must be adhered to.
• Do not install above a cooker with a high
level grill.
• If the cooker hood is installed for use above
a gas appliance then the provision for
ventilation must be in accordance with the
Gas Safety Codes of Practice BS.6172,
BS.5440 and BS.6891 (Natural Gas) and
BS.5482 (LP Gas) 1994, the Gas Safety
(Installation & Use) Regulations, the Building
Regulations issued by the Department of the
Environment, the Building standards
(Scotland) (Consolidated) Regulations
issued by the Scottish Development
Department.
■
Child Safety
• This appliance is designed to be operated by
adults. Children should not be allowed to
tamper with the controls or play with the
appliance.
■
During Use
• This product is for domestic use only.
• The fan motor of this cooker hood
incorporates a cut-out device which will
operate if the cooker hood is installed below
the minimum height recommended under
section ‘Clearance Height’, or if the motor
becomes overheated. If the cut-out device is
activated, switch off the fan motor and allow
the cooker hood to cool. The cut-out device
will reset itself when the fan motor has
cooled significantly.
• Never leave frying pans unattended during
use as over-heated fats and oils might catch
fire.
• Never do flambé cooking under this cooker
hood.
• Do not leave naked flames under the hood.
■
Maintenance and Service
• This appliance can be a hazard if the
synthetic paper and charcoal filters are not
replaced as recommended.
• It is dangerous to alter the specifications or
modify this product in any way.
• When installed between adjoining wall
cabinets the wall cabinets must not overhang
the hob.
• Under no circumstances should you attempt
to repair the appliance yourself. Repairs
carried out by inexperienced persons may
cause injury or more serious malfunction.
Refer to your local Zanussi Service Force
Centre. Always insist on genuine spare
parts.
• If the room where the hood is to be used
contains a fuel burning appliance such as a
central heating boiler then its flue must be of
the room sealed or balanced flue type.
3
YOUR APPLIANCE
OPERATING INSTRUCTIONS
The cooker hood is designed to extract
unpleasant odours from the kitchen, it will not
extract steam.
To obtain the best performance it is advisable
to switch on the hood a few minutes before
you start cooking and leave it running for
approximately 15 minutes after finishing.
Cooker Hood Controls
The cooker hood functions are controlled by
two slide switches, located centrally in the
front edge of the metal grille panel.
L. Light ON/OFF control
V. Fan Speed Control
Position 0 - Off
Position 1 - Low
Position 2 - Normal
Position 3 - Boost
To Operate
Select the required functions.
4
The appliance can be installed to recirculate
or extract contaminated air. The cooker hood
is more effective when used in the extraction
mode.
Extraction
In the extraction mode the contaminated air
enters the cooker hood, passes through the
grease filter and out through the ducting to the
atmosphere.
Recirculation
In the recirculation mode contaminated air is
passed through the charcoal filter to be
purified and recirculated into the kitchen
through a recirculation grille. Ensure the
charcoal filters are in position.
When the ducting position is selected
the charcoal filters are not required.
Never do flambé cooking under this
cooker hood.
Never leave frying pans unattended
during use as over-heated fats and oils
can catch fire.
Do not leave naked flames under the
cooker hood.
Ensure heating areas on your hob are
covered with pots and pans when using
the hob and cooker hood
simultaneously.
5
MAINTENANCE AND CLEANING
Before carrying out any maintenance or cleaning
isolate the cooker hood from the mains supply.
The cooker hood must be kept clean, as a
build up of grease or fat can be a fire hazard
The external surfaces of the hood should be
cleaned regularly. Wipe the cooker hood
frequently with warm soapy water using a mild
detergent. Dry thoroughly after cleaning.
Always wear protective gloves when
cleaning the hood.
Never use scouring pads or abrasive
cleaners.
Never use excessive amounts of water
when cleaning particularly around the
control panel.
To obtain the best results from your cooker
hood, replacement of the grease filter(s) will
ensure good performance and reliability, while
extending the working life of the hood.
Charcoal Filter
The charcoal filters absorb the odours from
cooking. They will slowly become saturated
and gradually less effective.
The charcoal filters cannot be cleaned, we
recommend they are replaced every 3-6
months or more often if the hood is used for
more than 3 hours per day.
K
To Remove the Charcoal Filter
1.
Remove the lower grille, supporting the
grille with one hand and draw down
on the two grey handles (located on
each side of the grille).
2.
The charcoal filters are handed
and should be fitted one at a time.
3.
Insert one end of the filter into the
slots in the fan housing then lower
the other end until the tab engages
the slot in the casing.
6
Synthetic Grease Filter
The grease filter has saturation indicators,
which are small squares made from a series of
dots. When the white paper inside the squares
becomes saturated with grease the coloured
dots start to run and spread across the paper,
indicating that the filter has reached saturation
point and must be replaced.
The synthetic grease filter
cannot be cleaned.
It must not be washed.
K
To Replace the Synthetic
Grease Filter
1.
Remove the lower grille.
2.
Push the wire retaining clips to the
side and remove.
3.
Clean the metal grille and clips before
replacing the paper grease filter.
The clips have sharp points, handle with
care and keep away from children.
This appliance is a possible fire
hazard if the grease and charcoal
filters are not replaced as
recommended.
Changing the Light Bulb
The bulb should be replaced with a 220-240
volt 40 watt clear cylindrical shape bulb with a
small Edison (E14) screw thread.
Replacement filters, and light bulbs can be
obtained from your local Service Force Centre.
7
SOMETHING NOT WORKING
If, having followed these instructions carefully, your cooker hood fails to work properly please carry out
the following checks.
Solution
Symptom
The cooker hood will not start
• Check the hood is connected to the electricity supply.
• Check that the fan speed control is set to 1, 2 or 3.
The cooker hood is not working effectively
• The fan speed is set high enough for the task.
• The grease filter is clean.
• The kitchen is adequately vented to allow the entry
of fresh air.
• If set up for recirculation, check that the charcoal
filter is still effective.
• If set up for extraction, check that the ducting and
outlets are not blocked.
The cooker hood has switched off during
operation
• The safety cut-out device has been tripped.
• Turn off the hob and then wait for the device to reset.
In-guarantee customers should ensure
that the above checks have been made as
the engineer will make a charge if the fault
is not a mechanical or electrical
breakdown.
If after all these checks, the problem persists,
contact your local Service Force Centre,
quoting the model and serial number.
Please note that it will be necessary to
provide proof of purchase for any
in-guarantee service calls.
SERVICE AND SPARE PARTS
If you require an engineer or wish to purchase spare
parts contact your local Service Force Centre by
telephoning:
For general assistance with your appliance or for
information on Zanussi products please contact our
Customer Care Department.
Customer Care Department,
Zanussi
55-77 High Street
Slough
Berkshire
SL1 1DZ
08705 929929
Your telephone call will be routed to your local
Service Force Centre. The addresses are listed at the
back of the book.
Tel: 08705 727 727(*)
*calls to this number may be recorded for training
purposes.
8
PEACE OF MIND FOR TWENTY FOUR MONTHS
STANDARD GUARANTEE CONDITIONS
We, Zanussi, undertake that if within twenty four months of the date of the purchase this Zanussi built-in appliance
or any part there of is proved to be defective by reason only of faulty workmanship or materials, the company will, at
our option repair or replace the same FREE OF ANY CHARGE for labour, materials or carriage on condition that:
•
•
•
•
•
The appliance has been correctly installed and used only on the electrical supply stated on the rating plate.
The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer’s
operating and maintenance instructions.
The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not
authorised by us.
All service work under this guarantee must be undertaken by Zanussi Service Force Centre.
Any appliance or defective part replaced shall become the property of this company.
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours
in which case a premium will be charged.
EXCLUSIONS
This Guarantee does not cover:
Damage or calls resulting from transportation, improper use or neglect, the replacement of any lilght bulbs or removable
parts of glass or plastic.
• Costs incurred for calls to put right appliances improperly installed or calls to appliances outside the United
Kingdom.
• Appliances found to be in use within a commercial environment, plus those which are the subject of rental
agreements.
• Products of Zanussi manufacture which are not marked by Zanussi.
This guarantee is in addition to your statutory and legal rights.
ZANUSSI EUROPEAN GUARANTEE
If you should move to another country within Europe then your guarantee moves with you to your new home subject
to the following qualifications:
• The guarantee starts from the date you first purchased your product.
• The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of
use for this brand or range of products.
• This guarantee relates to you and cannot be transferred to another user.
• Your new home is within the European Community (EC) or European Free Trade Area.
• The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal
household.
Before you move please contact your nearest Customer Care Centre, listed below, to give them details of
your new home. They will then ensure that the local Service Organisation is aware of your move and able to
look after you and your appliances.
France
Germany
Italy
Sweden
UK
Senlis
Nurnberg
Pordenone
Stockholm
Slough
+33 (0)3 44 62 29 99
+49 (0)911 323 2600
+39 (0)1678 47053
+46 (0)8 738 79 50
+44 (0)1753 219 897
9
INSTALLATION INSTRUCTIONS
It is dangerous to alter the specifications or attempt to modify this product in any way.
Technical Information
DIMENSIONS
WEIGHT
ELECTRICAL SUPPLY:
POWER CONSUMPTION:
FAN MOTOR:
LAMP:
SUITABLE FOR INSTALLATION
ABOVE:
HEIGHT:
WIDTH
DEPTH
DUCTING OUTLET:
GROSS:
NET:
20.00cm
52.20cm
28.50cm
120mm
4.8kg
5.8kg
Voltage (50Hz)
220-240 V
175 W
95W
80W
ELECTRIC HOB:
GAS HOB:
SLOT-IN GAS COOKER:
SLOT-IN ELECTRIC COOKER:
7KW (max)
10KW (max)
13.5KW (max)
12.4KW (max)
Note: CE Marking certifies that this appliance complies with the requirements laid down in EEC directive 89:336. (Electromagnetic compatibility)
and subsequent modifications and Low Voltage directive 72/23/E.
ELECTRICAL CONNECTIONS
WARNING: DOUBLE
INSULATED-DO NOT EARTH
Electrical Requirements
This appliance is fitted with a 2 core mains
cable and must be permanently connected to
the electricity supply via a double-pole switch
having 3mm minimum contact gap on each
pole. A Switched Fuse Connection Unit to
BS1363 Part 4, fitted with a 3 Amp fuse, is a
recommended mains supply connection
accessory to ensure compliance with the Safety
Requirements applicable to fixed wiring
instructions.
Any permanent electrical installation must
comply with the latest I.E.E. Regulations and
local Electricity Board regulations. For your own
safety this should be undertaken by a qualified
electrician e.g. your local Electricity Board, or a
contractor who is on the roll of the National
Inspection Council for Electrical Installation
Contracting (NICEIC).
Electrical Connection
Before connecting to the mains supply ensure
that the mains voltage corresponds to the voltage
on the rating plate inside the cooker hood.
This appliance conforms to BS 800: 1988 and
EEC Directive No. 78 308 regarding
suppression of radio and television
interference.
10
INSTALLING THE COOKER HOOD
Please ensure that when the appliance is
installed it is easily accessible to an
engineer in the event of a breakdown.
All installations must comply with the
local authorities requirements for the
discharge of exhaust air.
Incorrect installation may affect the
safety of this cooker hood.
Installation Requirements
Before fitting the hood beneath any type
of canopy or wall cabinet, ensure that
the housing is firmly fixed to the wall in
accordance with the manufacturer’s
instructions.
If it is necessary to fix the housing for the
canopy to a hollow construction plaster or
partition board structure then it should be
sufficiently reinforced to be quite rigid in the
area of the cabinet housing fixings.
Ducting
The ducting must be fire retardant 125mm (5 ins)
in diameter and the length should be no
more than:
3 metres with one 90 0 bend
2 metres with two 90 0 bends
Bends of more than 90 0 will reduce the
efficiency of the hood and reduce the airflow.
Clearance Height
The cooker hood is designed to be fitted over
a cooking appliance at the clearance heights
stated, providing the maximum output of the
appliance beneath does not exceed the
maximums quoted in the Technical Specifications.
If the output of the appliance below the
cooker hood exceeds the maximum outputs
quoted in the Technical Information, please
refer to the cooker appliance manufacturer’s
installation instructions.
11
A minimum clearance height of 650mm
(25 1/2”) is required when installed above a
built-in electric hob, or 700mm (27 1/2”) when
installed above a built-in gas hob.
A minimum clearance height of 685mm (27”)
is required when installed above a slot-in
electric cooker, or 787mm (30 1/2”) when
installed above a slot-in gas cooker.
Hob
A: Built-in Electric Hob:
B: Built-in Gas hob:
C: Slot-in Electric Cooker:
D: Slot-in Gas Cooker:
When installed between adjoining wall
cabinets, the wall cabinets must not overhang
the hob and the distance between the
underside of the cabinet and the worktop must
be 450mm. If the height of the wall cabinet is
less than 450mm, a gap of 50mm must be
maintained either side of the hob.
650mm
700mm
685mm
787mm
minimum
minimum
minimum
minimum
clearance
clearance
clearance
clearance
This cooker hood must not be installed
above a cooking appliance with a high
level grill.
Unpacking
The fittings supplied to install this cooker
hood can be found with the instruction book
inside the packaging.
120 - 125 mm ducting collar
K
Fitting the Cooker Hood into
the Housing/Canopy
The hood is fixed to the housing using the
screw holes located around the base of the
casing. Access to the screw holes will
require the removal of the metal grille panel.
Positioning the Cooker Hood
•
Measure the underside of the canopy or
kitchen cabinet to mark the position for the
cut-out. The cut-out measurement should be:
- 497mm (19 5/8”) wide
- 259mm (10 1/4”) deep
A
•
•
B
• ø 125 •
≥13
••
Check the position of the hole is correct
with the measurements above before
making the cut-out.
12
•
65
•
•
The hood is fixed using the holes located in
the rim around the base of the casing visible
when the inlet grille is in the open position.
Support the grille panel with one hand and
draw down on the two grey handles (A) which
are located on each side of the grille with the
other hand.
Raise the hood into the cut out and mark the
positions for the fixing screws. Pilot drill the
fixing holes and fit the hood.
Venting
The hood is more effective when used in the
extraction setting (ducted to the outside).
Venting kits maybe purchased through
your retailer or DIY store, and must be ducted
to an outside vent of 125mm (5”) minimum.
The ducting used must be manufactured
from fire retardant material.
When the hood is ducted externally the
charcoal filters must be removed.
Recirculation
If you are using the hood for recirculating,
ensure the charcoal filters are in position
following the instructions below.
K
Inserting the Charcoal Filters
1.
Remove the grille panel, support the grille
with one hand and draw down on the two
grey handles (located at each side of the grille).
2.
The charcoal filters are handed and
should be fitted one at a time.
3.
Insert one end of the filter into the slots in
the fan housing, then lower the other and
until the tab engages the slot in the casing.
Extraction
The charcoal filters are not required with this
system and should be removed. To do this
reverse the procedure described in Inserting
the ‘Charcoal Filters’.
13
Ducting
The ducting used must be fire retardant 125mm (5”)
in diameter. If possible duct through the wall at
the rear of the canopy or wall cabinet. For the
best performance use the shortest possible
duct run and the minimum number of bends.
Where flexible ducting is fitted it should not be
turned through very tight bends as this may
impair the performance of the hood. It is
recommended a maximum length of 3m, to be
installed, to be reduced 1m for each 90°
bend installed in the ducting run. If the
distance is greater than 3m the efficiency of
the hood could be impaired.
A flange spigot of a 120-125 mm (5”) is
supplied for attaching to ducting if you are
using the appliance in the extraction mode.
If the room where the cooker hood is to
be used contains a fuel burning
appliance such as a central heating
boiler, then its flue must be of the room
sealed or balanced flue type.
If other types of flue or appliances are
fitted ensure that there is an adequate
supply of air to the room.
The cooker hood ducting (extraction
version) must never be connected to
central heating flues, radiators or water
heaters etc.
14
15
16
17
18
19
© Electrolux Household Appliances Limited 2000
4329077 02 - 010911