advertisement
REMOTE CONTROL MODEL MBR3430
~~
OPERATION
The multi-brand remote supplied with your new Zenith TV allows you to operate most models of infrared (IR) remote-controlled TVs, VCRs and cable-TV converters, even if they are all different brands.
Your multi-brand remote has already been programmed to operate your Zenith TV, a Zenith VCR and a Zenith cable-TV decoder. It must be “taught” to operate other brands. Refer to “Auto Find Mode” and “Programming Your Remote
Control” for details.
CHOOSE THE OPERATING MODE
To operate your TV, VCR or CABLE-TV decoder, you must first choose the remote’s mode of operation. To select the mode, press the MODE key until the desired indicator lights.
Some KEYS on the remote will always operate a particular appliance. For example, VOLUME always operates the TV volume and PLAY always operates the VCR. The function of other keys depends on the mode selected.
Point toward unit to be controlled
Operating mode selection and indicators
Menu operations on TV and some VCRs
Numbered buttons for channel selection and other uses
Learn functions for user programmed sequences -
NOTE: See following pages for operating instructions.
OFF-ON
Controlled device
OFF/ON
VOLUME
1
TIMER SEQ e=3 m e m
RECORD STOP PAUSE SEARCH wcE3cEE3a
REW PLAY F FWD TVNCR
SOURCE
FLASHBK
CHANNEL
Special features on TV and some VCRs t-
Channel Up/Down for TVs, VCRs and cable k
Volume Up/Down for TV t
Special features on some
TVs and some VCRs
MBR3430
4 - l
2736-O
2736-O
REMOTE CONTROL MODEL MBR3430
TV OPERATIONS
The following functions and operations apply to your Zenith
TV. The remote control must be in the TV mode to operate your TV.
MODE
Used to select the TV mode of operation.
\
TV
Lights when TV mode of operation is selected.
CC (Closed Captions)
Used to view closed captions broadcast with some television programs.
MENU, SELECT and ADJUST
Used with on-screen menus to see menu, select an option, and adjust that option.
--=I
Numbered Buttons
Used to select a TV channel.
ENTER
Used to view the Channel/Time
Display or to remove any onscreen menu or display.
LEARN
Used to program remote.
PIP
Used to activate
Picture-In-Picture inset.
SWAP
Used to swap picture in PIP inset with the main television picture.
/
Point toward your TV,
OFF/ON
Used to turn TV ON or OFF.
SOURCE
Used to display the menu of TV sources for some TVs. Press again to step through the source selections. On some TVs, press to select AUX (Auxiliary) channel,
FLASHBK (Flashback)
Used to return to the last TV
/ channel you were watching.
CHANNEL Up/Down
Used to sequence through the TV channels.
\
VOLUME Up/Down
Used to adjust the TV’s volume.
MUTE
Used to turn off sound while the
- picture remains. Press again to restore the sound.
SPATIAL EQUALIZATION
(SW
Used to select SEQ audio mode on
TVs equipped with SEQ feature.
FREEZE
Used to freeze the motion of the picture on the PIP inset.
TIMER
Used to activate the SLEEP
TIMER. Press repeatedly to select desired turn-off time.
4 - 2
REMOTE CONTROL MODEL MBR3430
VCR OPERATIONS
The following functions and operations apply to Zenith VCR models built after 1988. The remote control must be in the
VCR mode to operate your VCR.
The remote control supplied with your VCR may have keys not duplicated on the new remote. If these functions are desired, the original remote control will have to be used.
Point toward your VCR.
MODE
Used to select the VCR mode of operation.
VCR
Lights when VCR mode of operation is selected.
OFF/ON
Used to turn VCR ON or OFF.
MENU, SELECT, ADJUST and QUIT
Used with on-screen menus and programming options of the VCR.
See VCR operating guide for details.
SOURCE
CY
FLASHBK
FLASHBK (Flashback)
Used during VCR playback to view the channel tuned by the
‘@@@@VCR .
Numbered Buttons
Used to select a TV channel through the VCR. Also, used to set the timer in the VCR, and to enter programming information.
CHANNEL
VOLUME
ENTER
Used with the numbered buttons to / select a TV channel through the VCR.
AIW/PM
Used to set timer during programming.
LEARN
&pQ a
SWAP TIMER SEQ
c=> CD CZD CD
RECORD STOP PAUSE SEARCH tzaD CEI EES CzP
REW PLAY F F W D TV/VCR
CHANNEL Up/Down
Used to sequence through channels on the VCR.
TIMER
Activates TIME RECORD on some VCRs. See the VCR operating guide for details.
TV/VCR
Used to select the source of the programs seen on the TV. Switches the VCR between TV mode and
VCR mode.
TV Mode: Channels are selected through the TV.
VCR Mode: Channels or tape operation are selected through the
VCR.
RECORD, STOP, PAUSE,
\
SEARCH, REW, PLAY and
F FWD
Used for tape recording and playback functions. See the VCR operating guide for details.
2736-O
4 - 3
REMOTE CONTROL MODEL MBR3430
CABLE-TV OPERATIONS
The following functions and operations apply to a Zenith cable-TV decoder. The remote control must be in the CABLE mode to operate your cable-TV decoder.
The remote control supplied with your cable-TV decoder may have keys not duplicated on the new remote. If these functions are desired, the original remote control will have to be used.
MODE
Used to select the Cable mode of operation.
CABLE
Lights when CABLE mode of operation is selected.
MENU, SELECT, ADJUST and QUIT
Functions depend on Cable-TV system. See Cable-TV decoder operating guide for details.
Numbered Buttons
Used to select channels through
Cable-TV decoder.
ENTER
Used with the numbered buttons to select a TV channel through the
Cable-TV decoder.
Point toward your-Cable-TV decoder.
OFF/ON
Used to turn VCR ON or OFF.
@iii)
El
MENU
SOURCE
FLASHBK
S O U R C E s Selects “A” or “B” cable channels.
CHANNEL
CHANNEL Up/Down
Used to sequence through channels on the Cable-TV decoder.
cl3 a a
LEARN PIP FREEZE
GB cx c2 CI
SWAP TIMER SEQ
c3 CxB as cz3
RECORD STOP PAUSE SEARCH c3zD CB ED CD
REW PLAY F FWD TVlVC R
2736-O 4 - 4
REMOTE CONTROL MODEL MBR3430
PREPARATION FOR USE
Batteries are provided with this remote, but you must install them before using the remote.
INSTALLING BATTERIES
When the effective operating range of your remote becomes noticeably shorter, replace the batteries with two high-quality, alkaline, size AAA batteries.
Zenith is not responsible for damage caused by battery leakage.
After installing new batteries, the remote control will set itself to Zenith brand codes, as follows: TV=1 0 I, VCR=20 1 and
CABLE=30 1.
If you are going to operate equipment that uses different codes, the remote must be reprogrammed for those codes.
AUTO FIND MODE
Use Auto Find to automatically find the brand code needed to operate your equipment L)
NOTE: If no button is pressed for 60 seconds or more during
Auto Find, the remote will automatically exit Auto Find without storing any brand codes. (LEDs will flash 3 times upon exiting.)
1.
Turn on the equipment you wish the remote to operate.
2. Press and hold LEARN until mode indicator lights
(about 4 seconds).
3.
Use MODE to select the mode you wish to program
(TV, VCR or CABLE).
4.
Enter “00” then press ENTER within 2 seconds. All four mode indicator lights will turn ON and then OFF, leaving the mode indicator light for the active mode ON.
5.
Point remote towards the equipment.
6.
Press and release OFF/ON on the remote about once every second, until the equipment turns OFF. Press ENTER before pressing any other buttons.
If you press OFF/ON again before pressing ENTER
Auto Find will have to be repeated.
7.
Try other buttons to see if they operate the equipment.
If they do not, you may wish to reenter Auto Find and try to find another code. The remote will begin with codes starting from where it left off prior to exiting
Auto Find.
_ ___-- - -
-
~-----_ . -
’ ~
L--1
CABLE-TV DECODER
//
CHANNEL , g(g i
8.
Repeat Auto Find for each piece of equipment you want your remote to operate. NOTE: Only one brand code can be programmed in each of the four modes.
If no brand code has been entered after searching through all brand codes in any mode, the remote will flash all four mode indicator lights in a chasing manner. Wait 60 seconds or press
ENTER or LEARN to return to normal operation.
2736-O
4 - 5
REMOTE CONTROL MODEL MBR3430
PROGRAMMING BRAND CODES
Introduction
Before using your new remote control, it must be programmed to recognize the brands of equipment it will be used to operate. If you are using a Zenith VHS VCR or a Zenith cable-TV decoder, the remote has already been programmed for you.
Find the code that corresponds to each brand and type of equipment you are going to operate. Refer to Tables 1,2 and 3.
For example, if you were programming the remote for use with a Zenith TV, you would look for “Zenith” in “Table I”, and find code “101.”
Write the brand codes for your equipment on the following lines.
TV CODE:
CABLE CODE:
VCR CODE:
-
1.
2.
3.
4.
5.
6.
Press MODE repeatedly to select the desired TV,
VCR or CABLE operating mode for the remote.
Press LEARN for about 5 seconds until the MODE indicator lights for the selected TV, VCR or CABLE mode of operation.
Enter the proper brand code number for the equipment to be controlled.
Press LEARN. All three mode indicators should light briefly, then turn off to indicate the brand code has been programmed.
If all three mode indicators fail to light briefly, an error has occurred. Repeat Steps 1-4 to try again.
Repeat steps 1-4 to program the remote for the other equipment you are using.
NOTE: CABLE mode can be programmed to operate a second TV or second VCR, if desired.
When batteries are removed: It will be necessary to reprogram the proper VCR and cable-TV decoder codes.
.
Operating MODE Selector
Operating Mode
Indicators
Numbered Buttons
Use to enter code number for desired brand.
LEARN Button 1
~c3~~
SWAP TIMER SEQ
CCDCIDCD
RECORD STOP PAUSE SEARCH a3cEB~cz3
REW PLAY F FWD TVNCR
2736-O
4 - 6
REMOTE CONTROL MODEL MBR3430
TV, VCR AND CABLE-TV OPERATING CODES
Table 1. TV Codes by Brand
TV Brand
Name Code
TV Brand
Name Code
Admiral
Admiral
Akai
Amark
AOC
Bell & Howell
Centurion
Coronado
Curtis Mathes
Curtis Mathes
Curtis Mathes
Daytron
Emerson
Emerson
Emerson
Emerson
Emerson
Emerson
Fisher
Fisher
General Electric
General Electric
General Electric
General Electric
Goldstar
Goldstar
Go1 dstar
Hitachi
Hitachi
Hitachi
JVC
JVC
J.C. Penney
J.C. Penney
116 119
121 Montgomery Ward 121
104 Montgomery Ward 130
103
104
12 1 Panasonic
119 Panasonic
103 Philco
116 Philco
119 Philco
121 Philco
119 Philips
103 Philips
104 Pioneer
123
124
13 1
136
109
118
Montgomery Ward
NEC
NEC
Portland
Quasar
Quasar
Realistic
Realistic
Realistic
106 RCA
107 RCA
114
116
103 Samsung
104 Samsung
119 Samsung
102 Sanyo
103
RCA
Sampo
Sanyo
J.C. Penney
J.C. Penney
J.C. Penney
KMC
KTV
KTV
Lodgenet
Logik
LX1
LX1
Magnavox
Magnavox
Magnavox
Magnavox
Magnavox
Magnavox
Majestic
129 Sanyo
125 Scott
132 Sears
104 Sears
110 Sears
114 Sears
117 Sears
119
103
103
104
121
121
133
Sears
Sears
Sharp
Sharp
Sharp
Sharp
Sharp
137 Sony
103 Sylvania
112 Sylvania
113 Sylvania
119 Sylvania
127 Sylvania
128 Sylvania
121 Tatung
Marantz
Marantz
Memorex
MGA/Mitsubishi
104 Teknika
120 Teknika
121 Teknika
104 Teknika
119 Telerent MGA/Mitsubishi
MGA/Mitsubishi
MGAMitsubishi
120 Telerent
130 Toshiba
Montgomery Ward 103 Toshiba
Montgomery Ward 104 Toshiba
Montgomery Ward 105 Yom
Montgomery Ward 113 Zenith
Montgomery Ward 114
104
119
106
107
103
104
112
134
119
101
113
112
113
135
103
106
107
105
123
124
104
116
126
119
103
119
103
108
109
110
111
134
108
109
118
119
122
133
137
115
118
134
103
105
112
113
117
119
127
128
106
103
112
121
124
103
121
110
111
Table 2. VCR Codes by Brand
JCR Brand
(ame Code
VCR Brand
Name Code
1kai iudio Dynamics iudio Dynamics
3roksonic zanon zitizen
:raig
:urt~s Mathes
Curtis Mathes
>BX
>BX zmerson
3merson zmerson imerson lmerson
3merson
?sher
Tisher yisher
:unai
General Electric
General Electric
General Electric
3oldstar
Hitachi nstant Replay nstant Replay
223 Pentax
202 Philco
2 18 Philips
22 1 Philips
215
214
214
227
214 Pioneer
209 Pioneer
210
215
212 Pioneer Laser Disk 228
214 Quasar 214
216 RCA
202 RCA
218 RCA
203 RCA
22 1 Realistic
223 Realistic
215
216
220
227
206
208
226
233
235
Realistic
Realistic
Realistic
2 11 Samsung
212 Samsung
213 Sanyo
231 Sanyo
214 Scott
216 Scott
220 Scott
209 Sears
215 Sears
214 Sears
227 Sears
204
205
233
206
209
211
212
212
214
231
220
230
206
212 v c v c
.C. Penney
.C. Penney
.C. Penney
(enwood vlagnavox
202 Sears
225 Sharp
214 Sony VHS
2 18 Sony Video 8
227 Sylvania
202 Sylvania
207 Sylvania vlagnavox vIarantz tiararitz vlarta demorex
2 14 Symphonic
207 Tashiko
2 18 Tatung
209 Teat
212 Teat tiemorex vIemorex tiGA/Mitsubishi vIGA/Mitsubishi
214
23 1
204
Teknika
Toshiba
Toshiba
222 Vector Research tiontgomery Ward 208 Vector Research tiontgomery Ward 214 Yamaha
\/lontgomery Ward 219 Yamaha qEC gEC
)anasonic
202 Zenith VHS
2 18
2 14
Zenith VHS
Zenith VHS
231
209
202
202
231
234
205
215
204
215
208
232
217
207
214
227
218
202
218
201
225
229
Table 3. Cable Decoder Codes by
Brand
Cable Decoder
Brand Name Code
Cable Decoder
Brand Name Code
Drake Satellite
Drake Satellite
Gemini
312 Pioneer
330 Regency
305 Samsung
315
329
335
Gemini 33 1 Scientific Atlanta 316
General Instrument 305 Scientific Atlanta 323
General Instrument 306 Scientific Atlanta 336
Ham1 in 302 Sprucer
Ham1 in
Jerrold
303
304
(Panasonic)
Standard
313
Jerrold
Jerrold
Jerrold
Jerrold
Kale Vision
Macom
Macom
Macom Satellite
Magnavox
NSC
Oak
Oak
Panasonic
Panasonic
Paragon (Zenith)
307 Components
308 STS Satellite
309 Telecaption 4000 325
310 Tocom 317
335 Tocom VIP
3 14 Toshiba
32 1 Toshiba Satellite
322 Zenith
334 Zenith
335 Zenith AV3000
3 11 Zenith Satellite
335
324
318
322
319
301
322
327
312
332 Zenith Satellite
3 13 Zenith Satellite
330
328
320 Zenith Laser Disk 326
333
2736-O 4 - 7
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement