CFSW-51MHL
5 by 1 HDMI/MHL Fast Switcher
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
•
Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
•
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
•
Never spill liquid of any kind on or into this product.
•
Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
•
Do not attach the power supply cabling to building surfaces.
•
Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
•
Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
•
To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO.
DATE DD/MM/YY SUMMARY OF CHANGE
RDV1
01/04/11
Preliminary Release
VS1
25/01/13
Updated format/diagrams
CONTENTS
1. Introduction�������������������������������������������� 1
2. Applications������������������������������������������� 1
3. Package Contents�������������������������������� 1
4. System Requirements���������������������������� 1
5. Features�������������������������������������������������� 2
6. Operation Controls and Functions������� 3
6.1 Front Panel����������������������������������������3
6.2 Rear Panel�����������������������������������������4
6.3 Remote Control��������������������������������5
6.4 RS-232 Protocol���������������������������������6
6.5 Remote Command Protocol����������8
7. Connection Diagram���������������������������� 9
8. Specifications�������������������������������������� 10
9. Acronyms��������������������������������������������� 10
1. INTRODUCTION
The 5 by 1 HDMI/MHL Fast Switcher has MHL (Mobile High-Definition
Link) interface integrated on its fifth input which can be used to
share high definition video and audio from any of your MHL-ready
mobile devices on an HDTV, and simultaneously charge the device
whilst connected. The switcher supports 3D signal up to 2.25Gbps
bandwidth, 12-bit Deep Color, Hi-Def lossless audio and other features
defined by HDMI specifications, on all of its 5 input. Source selection
can be easily controlled through on-panel buttons, IR remote control
or by RS-232 protocol.
2. APPLICATIONS
• Smart home entertainment
• Show room or meeting room
• Smart AV installation
• Mobile device integration
3. PACKAGE CONTENTS
• 1× 5 by 1 HDMI/MHL Fast Switcher
• 1×5V DC Power Adaptor
• 1×IR Extender Cable
• 1×MHL to HDMI Cable
• 1×Remote Control with Battery (CR-113)
• Operation Manual
4. SYSTEM REQUIREMENTS
• HDMI sources such as PS3 or Blu-ray players for ports 1 to 5 using
standard HDMI cabling. The fifth port can be connected to a MHLready mobile device with a MHL to HDMI cable.
• HDMI equipped display.
1
5. FEATURES
• Supports InstaPort Technology™
• Supports five HDMI input ports, the fifth port is an HDMI/MHL port
• Supports one HDMI output
• Supports video resolutions up to 1080p@60 Hz
• Supports HDMI specification features, including data rates up to
2.25Gbps and12-bit Deep Color
• Supports 3D signal
• MHL port supports 1080p@30 Hz or 1080i@60 Hz resolutions
• MHL port supports charging of a connected mobile device
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
5X1 HDMI/MHL FAST SWITCHER CFSW-51MHL
1
1
POWER
INPUT
2
3
2
4
5
3
1 IR Receiver
Supports reception of IR codes from the system's IR remote control
only.
2 INPUT
Press the 'INPUT' source button to select the required input source,
the blue LED will indicate the selected source.
3 POWER
3
Press this button to switch the device 'ON' or press it again to put
it into standby mode. When the system is on the green LED will
illuminate.
6.2 Rear Panel
HDMI IN
RS232
IR IN
HDMI OUT
1 2
3
1
2
3
4
MHL/HDMI
5
4
DC 5V
5
1 IR IN
Connect to the supplied IR extender cable for receiving the IR
remote signal for this device only.
2 RS232
Connect to a PC or control system with D-Sub 9-pin cable for RS232 control. For RS-232 commands please refer to section 6.4.
3 HDMI OUT
Connect to LCD TV or HD monitor with an HDMI cable.
4 HDMI IN
Connect HDMI sources to the HDMI inputs 1 to 5 such as DVD
players, Blu-ray players, PS3s or other sources with HDMI cables. The
fifth input can be used to connect to HDMI or MHL-Ready mobile
devices.
Note: When a MHL device is connected to the fifth MHL-ready
input it will be charged automatically. If the MHL device is switched
off when connected, it will be turned on automatically.
5 DC 5V
Connect the DC 5V power supply into the system and plug the
adaptor to an AC wall outlet.
4
6.3 Remote Control
1 Power
Press this button to switch the
device on or to put the device
into standby mode.
2 HDMI 1~5
HDMI Input selection keys. Press a
key to directly select that input.
Note: For this model only keys
1~5 are active.
1
2
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
HDMI 6
HDMI 7
HDMI 8
Vol +
Mute
Vol -
3
4
5
7
Input
Menu
6
Exit
8
Enter
3 Mute/Vol +/Vol CR-113
These buttons control the volume
level or mutes the audio from the
MHL mobile device connected to MHL input port.
4
These buttons can control what is playing on the MHL input source
(including DVD or PS3 or Blu-ray or MHL mobile device), play/pause
and track skip forward/backwards.
Note: In order to control the MHL mobile device, the screen timeout setting must be set to 'OFF'.
5 Input
Press this button to cycle through the input selections (from 1~5).
6 Menu
Press this button to enter the input source's root menu (including
DVD or PS3 or Blu-ray or MHL device.
7 ▲▼◄► & Enter
These buttons will control the input source's OSD menu selection.
Note: For the system to control functions 3~6, the input source
device must comply with the following:
1. HDMI control (CEC/Via Link…etc) must be active*
2. Must be able to accept CEC commands*
*Please refer to the manual for the source device for compatibility
8 Exit
Press this button to exit the selection.
5
6.4 RS-232 Protocol
Pin Assignment
REMOTE CONTROL
CFSW-51MHL
Pin
Assignment
Pin
Assignment
1
NC
1
NC
2
TxD
2
RxD
3
RxD
3
TxD
4
NC
4
NC
5
GND
5
GND
6
NC
6
NC
7
NC
7
NC
8
NC
8
NC
9
NC
9
NC
►
◄
Baud Rate: 19200 bps
Data Bit: 8-bit
Parity: None
Flow Control: None
Stop Bit: 1-bit
6
RS-232 Commands
COMMAND
ACTION
POWER 00
Power Off (standby)
POWER 01
Power On
PORT 01
Output Select Input 1
PORT 02
Output Select Input 2
PORT 03
Output Select Input 3
PORT 04
Output Select Input 4
PORT 05
Output Select Input 5
AUTO 00
AUTO switch off
AUTO 01
AUTO switch on
ISP 01
Software ISP process
RCP 00-7f
RCP (remote command protocol) command
Note: The RS-232 commands will not be accepted unless followed
with a carriage return.
7
6.5 Remote Command Protocol
Opcode
Key Name
Opcode
Key Name
Opcode
Key Name
0x00
Select
0x2B
Enter
0x4D-0x4F
Reserved
0x01
Up
0x2C
Clear
0x50
Angle
0x02
Down
0x2D-02xF
Reserved
0x51
Subpicture
0x03
Left
0x30
Channel Up
0x52-0x5F
Reserved
0x04
Right
0x31
Channel Down
0x60
Play Function
0x05
Right-Up
0x32
Previous
Channel
0x61
Pause_Play
Func.
0x06
Right-Down
0x33
Sound Select
0x62
Record
Function
0x07
Left-Up
0x34
Input Select
0x63
Pause_
Record Func.
0x08
Left-Down
0x35
Show Info
0x64
Stop Function
0x09
Root Menu
0x36
Help
0x65
Mute Function
0x0A
Setup Menu
0x37
Page Up
0x66
Restore_
Volume Func.
0x0B
Contents
Menu
0x38
Page Down
0x67
Tune Function
0x0C
Favorite
Menu
0x39-0x3F
Reserved
0x68
Select_Media
Func.
0x0D
Exit
0x40
Reserved
0x69
Reserved
0x0E-0x1F
Reserved
0x41
Volume Up
0x6A
Reserved
0x20
Numeric 0
0x42
Volume Down
0x6B-0x70
Reserved
0x21
Numeric 1
0x43
Mute
0x71
F1
0x22
Numeric 2
0x44
Play
0x72
F2
0x23
Numeric 3
0x45
Stop
0x73
F3
0x24
Numeric 4
0x46
Pause
0x74
F4
0x25
Numeric 5
0x47
Record
0x75
F5
0x26
Numeric 6
0x48
Rewind
0x76-0x7D
Reserved
0x27
Numeric 7
0x49
Fast Forward
0x7E
Vendor_
0x28
Numeric 8
0x4A
Eject
0x29
Numeric 9
0x4B
Forward
0x2A
Dot
0x4C
Backward
Specific
0x7F
Reserved
7. CONNECTION DIAGRAM
PC
Set-top Box
Blu-ray Player
Satellite Recever
HDMI
HDMI
HDMI
HDMI
RS-232
HDMI IN
RS232
IR IN
HDMI OUT
1
2
3
4
MHL/HDMI
5
HDMI
IR Extender
60°
Remote
Smartphone
Media Player
HDTV
DC 5V
OR
HDMI
MHL
to
HDMI
8. SPECIFICATIONS
Video Bandwidth
225 MHz/6.75 Gbps
Input Ports
5×HDMI
Output Port
1×HDMI
Resolution Support
VGA~WUXGA@60 (RB)
480i/p, 576i/p, 720p@50/60/120,
1080i@50/60, 1080p@24/30/50/60
(MHL only supports 1080p@30 & 1080i@60)
ESD Protection
Human body model:
±8 kV (air-gap discharge)
±4 kV (contact discharge)
Power Supply
5 V/2.6 A DC (US/EU standards, CE/
FCC/UL certified)
Dimensions
240 mm (W)×110 mm (D)×49 mm (H)
Weight
792 g
Chassis Material
Metal
Silkscreen Color
Black
Operating Temperature
0 ˚C~40 ˚C/32 ˚F~104 ˚F
Storage Temperature
−20 ˚C~60 ˚C/−4 ˚F~140 ˚F
Relative Humidity
20~90% RH (No Condensation)
Power Consumption
3W
9. ACRONYMS
ACRONYM
COMPLETE TERM
MHL
Mobile High-Definition Link
CYPRESS TECHNOLOGY CO., LTD
Home page: http://www.cypress.com.tw