Epson EB-1776W User`s guide

nl
ow
D
d
de
oa
m
fro
w
w
e
.b
rre
bo
en
d
an
.v
w
User’s Guide
nl
ow
D
d
de
oa
m
fro
w
w
e
.b
rre
bo
en
d
an
• Safety indications
The documentation and the projector use graphical symbols to show how to use the projector safely.
Please understand and respect these caution symbols in order to avoid injury to persons or property.
.v
w
Notations Used in This Guide
Warning
This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Caution
This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
• General information indications
Attention
a
Indicates procedures which may result in damage or injury if sufficient care is not taken.
Indicates additional information and points which may be useful to know regarding a topic.
s
Indicates a page where detailed information regarding a topic can be found.
g
Indicates that an explanation of the underlined word or words in front of this symbol appears in the glossary of terms. See the "Glossary"
section of the "Appendix".
s "Glossary" p.140
[Name]
Menu Name
Indicates the name of the buttons on the remote control or the control panel.
Example: [Esc] button
Indicates Configuration menu items.
Example:
Select Brightness from Image.
Image - Brightness
nl
ow
D
oa
3
d
de
Contents
m
fro
w
w
.v
w
Preparing the Projector
rre
bo
en
d
an
Notations Used in This Guide . . . . . . . . . . . . . . . . . . . . . . . . 2
.b
Installing the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Projector Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
List of Functions by Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Quick and Easy Set up, Projection, and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connecting with a USB cable and projecting (USB Display) . . . . . . . . . . . . . . . . 8
Easy Image Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Adjusting the projected image to automatically fit into the screen frame - Screen
Fit - (EB-1776W only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Detecting projector movements and automatically correcting image distortion
......................................................... 9
Useful Functions for Expanding the Scope of Your Presentations . . . . . . . . . . . . . . 9
Project two images simultaneously (Split Screen) (EB-1776W/EB-1771W/
EB-1761W only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Increasing projection content in wide (WXGA) screen (EB-1776W/EB-1771W/
EB-1761W only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting to a wireless LAN and projecting images from the computer's screen
(EB-1776W/EB-1771W/EB-1761W only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting a projector and a computer wirelessly with Quick Wireless Connection
(EB-1776W/EB-1771W/EB-1761W only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Projecting images from portable devices over a network (EB-1776W/EB-1771W/
EB-1761W only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connect a USB storage device and project PDFs, movies, and images (Slideshow)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Making the most of the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Optimum color mode for projecting medical images . . . . . . . . . . . . . . . . . . . 10
Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Front/Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacing the remote control batteries . . . . . . . . . . . . . . . . . . . . .
Remote control operating range . . . . . . . . . . . . . . . . . . . . . . . . .
Installation Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Installation methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Screen Size and Approximate Projection Distance . . . . . . . . . . . . . . . . . . . . . . . 22
e
Introduction
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
11
12
13
14
15
18
19
Connecting Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Connecting a Computer . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting Image Sources . . . . . . . . . . . . . . . . . . . . . . . .
Connecting USB Devices . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the Wireless LAN Unit . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
24
25
26
27
Basic Usage
Projecting Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
From Installation to Projection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Automatically Detect Input Signals and Change the Projected Image (Source Search)
... ....... ......... ... ....... ......... ... ....... ..........
Switching to the Target Image by Remote Control . . . . . . . . . . . . . . . . . . . . . . .
Projecting with USB Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Uninstalling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29
30
31
31
31
32
33
Adjusting Projected Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Automatically Adjust to Fit into the Screen Frame - Screen Fit - (EB-1776W only)
... ....... ......... ... ....... ......... ... ....... .......
Correcting Keystone Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Correcting automatically - Auto H/V-Keystone - (EB-1776W only) . . . . . . . .
Correcting automatically - Auto V-Keystone - (EB-1771W/EB-1761W/EB-1751
only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Correcting manually - manual H/V-Keystone - . . . . . . . . . . . . . . . . . . . . .
Correcting manually - Quick Corner - . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Image Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Horizontal Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 35
. . . 37
. . . 37
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
38
38
39
41
41
42
nl
ow
D
oa
4
d
de
Contents
m
fro
w
w
Security Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Managing Users (Password Protect) . . . . . . . . . . . . . . . . . . . . . . . . . . .
Kinds of Password Protect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Password Protect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering the Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restricting Operation (Control Panel Lock) . . . . . . . . . . . . . . . . . . . . . .
Anti-Theft Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
e
. . 45
. . 46
Saving a User's Logo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
.b
42
42
43
44
45
45
rre
bo
en
.
.
.
.
.
.
d
an
.
.
.
.
.
.
.v
w
Correcting the Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting the Projection Quality (Selecting Color Mode) . . . . . . . . . . . . . . . . .
Setting Auto Iris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Aspect Ratio of the Projected Image . . . . . . . . . . . . . . . . . . . . .
Changing methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the aspect ratio for images from video equipment or from the HDMI
port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the aspect ratio for computer images . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
71
71
71
72
73
74
Useful Functions
Configuration Menu
Projection Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Using the Configuration Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Projecting Two Images Simultaneously (Split Screen) (EB-1776W/EB-1771W/
EB-1761W Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input sources for split screen projection . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restrictions during split screen projection . . . . . . . . . . . . . . . . . . . . . . . . . .
Projecting Without a Computer (Slideshow) . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications for files that can be projected using Slideshow . . . . . . . . . . . . .
Slideshow examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Slideshow operating methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Projecting images or movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Projecting PDF files (EB-1776W/EB-1771W/EB-1761W only) . . . . . . . . . . . . . .
Projecting image files in a folder in sequence (Slideshow) . . . . . . . . . . . . . . .
Playing a scenario . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operations while playing a scenario . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Image file display settings and Slideshow operation settings . . . . . . . . . . . . .
Hiding the Image and Sound Temporarily (A/V Mute) . . . . . . . . . . . . . . . . . . . .
Freezing the Image (Freeze) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pointer Function (Pointer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Enlarging Part of the Image (E-Zoom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse) . . . . .
Correcting the Color Difference when Projecting from Multiple Projectors . . . . . .
Summary of correction procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting an ID and using the remote control . . . . . . . . . . . . . . . . . . . . . . . . .
Correcting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
49
49
49
51
52
52
53
53
55
56
58
59
59
59
60
61
61
63
64
65
65
65
67
List of Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Configuration Menu Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Network menu (EB-1776W/EB-1771W/EB-1761W only) . . . . . . . . . . . .
Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Signal Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Extended Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Network Menu (EB-1776W/EB-1771W/EB-1761W Only) . . . . . . . . . . . . . .
Notes on operating the Network menu . . . . . . . . . . . . . . . . . . . . . . .
Soft keyboard operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Basic menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wireless LAN menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Security menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mail menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Others menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reset menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Info Menu (Display Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reset Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
77
78
80
81
82
84
86
86
87
88
89
90
91
92
93
94
94
nl
ow
D
oa
5
d
de
Contents
m
fro
w
w
Replacing Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
rre
bo
en
d
an
Replacing the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lamp replacement period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How to replace the lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resetting the lamp hours . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacing the Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Air filter replacement period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How to replace the air filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
e
.b
Using the Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
.v
w
Troubleshooting
Problem Solving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Reading the Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
When the Indicators Provide No Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Problems Relating to Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
No images appear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Moving images are not displayed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Projection stops automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
The message Not supported is displayed . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
The message No Signal is displayed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Images are fuzzy, out of focus, or distorted . . . . . . . . . . . . . . . . . . . . . . . . . 104
Interference or distortion appear in images . . . . . . . . . . . . . . . . . . . . . . . . . 105
The image is truncated (large) or small, the aspect is not suitable, or the image has
been reversed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Image colors are not right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Images appear dark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Problems when Projection Starts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
The projector does not turn on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Other Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
No sound can be heard or the sound is faint . . . . . . . . . . . . . . . . . . . . . . . . 108
The remote control does not work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
I want to change the language for messages and menus . . . . . . . . . . . . . . . . 109
Email is not received even if a problem occurs in the projector (EB-1776W/
EB-1771W/EB-1761W only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Image file names are not displayed correctly in Slideshow . . . . . . . . . . . . . . . 110
Cannot change settings using a Web browser . . . . . . . . . . . . . . . . . . . . . . . 110
Maintenance
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Cleaning the Projector's Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Cleaning the Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Cleaning the Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
114
114
115
117
117
117
117
Appendix
Useful Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
EasyMP Network Projection(EB-1776W/EB-1771W/EB-1761W only) . . . . . . . . . . . 120
EasyMP Slide Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
EasyMP Monitor(EB-1776W/EB-1771W/EB-1761W only) . . . . . . . . . . . . . . . . . . . 120
Optional Accessories and Consumables . . . . . . . . . . . . . . . . . . . . 121
Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Monitoring and Controlling (EB-1776W/EB-1771W/EB-1761W
Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Changing Settings Using a Web Browser (Web Control) . . . . . . . . . . . . . . . . . . .
Projector setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying the Web Control screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying the Web Remote screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Mail Notification Function to Report Problems . . . . . . . . . . . . . . . . . .
Reading Error Notification Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Management Using SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ESC/VP21 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Command list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Communications protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
123
123
123
124
125
125
126
126
126
127
127
nl
ow
D
oa
6
d
de
Contents
m
fro
w
w
Supported Resolutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Computer signals (analog RGB) . . . . . . . . . . . . . . . . . . . . . . . . .
Component video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Composite video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input signal from the HDMI port . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
133
133
133
133
134
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Projector General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
General Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
About Notations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Trademarks and Copyrights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
e
Supported Monitor Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
.b
Projection Distance (For EB-1776W/EB-1771W/EB-1761W) . . . . . . . . . . . . . . . . . 130
Projection Distance (For EB-1751) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
rre
bo
en
Screen Size and Projection Distance . . . . . . . . . . . . . . . . . . . . . . . . 130
d
an
About PJLink (EB-1776W/EB-1771W/EB-1761W Only) . . . . . . . . 129
.v
w
About Event ID (EB-1776W/EB-1771W/EB-1761W Only) . . . . . . 128
nl
ow
D
d
de
oa
m
fro
w
w
e
.b
rre
bo
en
d
an
This chapter explains the projector's features and the part names.
.v
w
Introduction
nl
ow
D
oa
8
d
de
Projector Features
m
fro
w
w
d
an
.v
w
Quick and Easy Set up, Projection, and Storage
EB-1776W
EB-1771W
EB-1761W
EB-1751
Screen Fit
-
-
-
Auto H/V-Keystone
-
-
-
USB Display
HDMI Connection
Auto V-Keystone
-
Split Screen
Wireless LAN
Connection
*1
*3
WXGA Resolutions
Quick Wireless
Connection
Network Menu
e
Function
• The portable, lightweight design allows you to easily make presentations
away from your office.
• Turn the projector on and off by simply plugging in or unplugging.
• Project onto large screens from a short distance.
• Make easy height adjustments with one lever.
• No cool down delay makes it easy to put away.
.b
Available functions differ depending on the model being used. See the table
below for a list of the functions available for each model.
rre
bo
en
List of Functions by Model
Connecting with a USB cable and projecting (USB Display)
By simply connecting the supplied USB cable,
you can project images from a computer's screen
without a computer cable.
s "Projecting with USB Display" p.31
-
*2
*2
-
Easy Image Correction
-
Slideshow
*1 The Wireless LAN unit is available as an option.
*2 The Quick Wireless Connection USB Key is available as an option.
*3 The Wireless LAN unit is supplied or available as an option. See the Quick
Start Guide for a list of supplied items.
Adjusting the projected image to automatically fit into the screen
frame - Screen Fit - (EB-1776W only)
By pressing the [Screen Fit] button, you can automatically adjust the
projected image to fit into the screen frame by correcting any image
distortion.
s "Automatically Adjust to Fit into the Screen Frame - Screen Fit -
(EB-1776W only)" p.35
nl
ow
D
oa
9
d
de
Projector Features
m
fro
w
w
d
an
.v
w
e
.b
rre
bo
en
Useful Functions for Expanding the Scope of Your
Presentations
Project two images simultaneously (Split Screen) (EB-1776W/
EB-1771W/EB-1761W only)
Detecting projector movements and automatically correcting
image distortion
This projector automatically corrects keystone distortion which occurs when
positioning or moving the projector.
For EB-1776W
Automatically corrects vertical and horizontal keystone distortion as well as
the focus.
s "Correcting automatically - Auto H/V-Keystone - (EB-1776W only)"
p.37
For EB-1771W/EB-1761W/EB-1751
Automatically corrects vertical keystone distortion.
s "Correcting automatically - Auto V-Keystone - (EB-1771W/EB-1761W/
EB-1751 only)" p.38
This function divides the projected screen in
two and projects two types of image side-byside. By simultaneously projecting images from
two sources on one screen, you can raise the
impact of your message or proposition during
video conferences or presentations.
s "Projecting Two Images Simultaneously
(Split Screen) (EB-1776W/EB-1771W/
EB-1761W Only)" p.49
Increasing projection content in wide (WXGA) screen (EB-1776W/
EB-1771W/EB-1761W only)
With a computer that has a 16:10 WXGA wide
LCD display, the image can be projected in the
same aspect. You can use whiteboards and other
landscape format screens.
s "Changing the Aspect Ratio of the Projected
Image" p.45
nl
ow
D
oa
10
d
de
Projector Features
m
fro
w
w
You can download "Epson iProjection" for free from the App Store. Any
fees incurred when communicating with the App Store are the
responsibility of the customer.
e
.b
rre
bo
en
d
an
By using EasyMP Network Projection and the
supplied or optional Wireless LAN unit, you can
wirelessly project the computer's screen.
s EasyMP Network Projection Operation
Guide
.v
w
Connecting to a wireless LAN and projecting images from the
computer's screen (EB-1776W/EB-1771W/EB-1761W only)
Connect a USB storage device and project PDFs, movies, and
images (Slideshow)
You can connect USB storage devices or digital cameras to the projector
and project saved images.
A wide range of file formats are supported such as PDF, movie, and image
files.
Connecting a projector and a computer wirelessly with Quick
Wireless Connection (EB-1776W/EB-1771W/EB-1761W only)
By simply connecting the supplied or optional
Quick Wireless Connection USB Key to a
computer, you can connect the projector and
the computer using the wireless communication
and project images from the computer.
s "Projecting Without a Computer (Slideshow)" p.52
Making the most of the remote control
You can use the remote control to perform operations such as enlarging
part of the image. You can also use the remote control as a pointer during
presentations or as a mouse for the computer.
s "Pointer Function (Pointer)" p.61
s "Enlarging Part of the Image (E-Zoom)" p.63
s "Using the Remote Control to Operate the Mouse Pointer (Wireless
Mouse)" p.64
Projecting images from portable devices over a network
(EB-1776W/EB-1771W/EB-1761W only)
If "Epson iProjection" is installed on your smart
phone or tablet device, you can wirelessly
project data from the device. Because you can
operate these devices from any location, you can
vary the way in which conferences or
presentations are made.
Optimum color mode for projecting medical images
A color mode called DICOM SIM is provided to project medical images,
such as X-ray photographs. This mode produces image quality that
approaches the DICOM standard.
(The projector is not a medical device and cannot be used for medical
diagnosis.)
s "Selecting the Projection Quality (Selecting Color Mode)" p.43
nl
ow
D
oa
11
d
de
Part Names and Functions
m
fro
w
w
Caution
While projecting, do not put your face or hands
near the air exhaust vent, and do not place objects
that may become warped or damaged by heat near
the vent. Hot air from the air exhaust vent could
cause burns, warping, or accidents to occur.
Indicates the access status of the supplied or optional
Wireless LAN unit.
C Wireless LAN unit
cover
(EB-1776W/EB-1771W/
EB-1761W only)
When making a wireless connection between the
projector and computer, remove this cover to install the
supplied or optional Wireless LAN unit.
D A/V mute slide knob
Slide the knob to open and close the A/V mute slide.
E Foot adjust lever
Press the foot adjust lever to extend and retract the front
adjustable foot.
s "Adjusting the Image Position" p.41
F Front adjustable foot
When setup on a surface such as a desk, extend the foot to
adjust the position of the image.
s "Adjusting the Image Position" p.41
G A/V mute slide
Close when not using the projector to protect the lens. By
closing during projection you can hide the image and the
sound.
s "Hiding the Image and Sound Temporarily (A/V
Mute)" p.60
H Remote receiver
Receives signals from the remote control.
I Sensor
(EB-1776W only)
Takes measurements when the projector automatically
corrects the projected image.
J Air intake vent
(air filter)
Takes in air to cool the projector internally.
s "Cleaning the Air Filter" p.112
K Speaker
Outputs audio.
L Indicators
Indicates the projector's status.
s "Reading the Indicators" p.98
M Zoom ring
Adjusts the image size.
s "Adjusting the Image Size" p.41
e
Exhaust vent for air used to cool the projector internally.
B Wireless LAN indicator
(EB-1776W/EB-1771W/
EB-1761W only)
.b
A Air exhaust vent
Function
rre
bo
en
Name
Function
d
an
Front/Top
Name
.v
w
All of the features in this guide are explained using illustrations of
EB-1776W unless otherwise mentioned.
nl
ow
D
oa
12
d
de
Part Names and Functions
m
fro
w
w
Operates the projector.
s "Control Panel" p.14
P Lamp cover
Open when replacing the projector's lamp.
s "Replacing the Lamp" p.114
e
O Control panel
Rear
.b
Adjusts the image focus.
s "Correcting the Focus" p.42
rre
bo
en
N Focus ring
(EB-1771W/EB-1761W/
EB-1751 only)
d
an
Function
.v
w
Name
Name
Function
A Power inlet
Connects the power cord to the projector.
s "From Installation to Projection" p.29
B Video port
Inputs composite video signals from video sources.
C Computer port
Inputs image signals from a computer and component
video signals from other video sources.
D USB (TypeB) port
• Connects the projector to a computer via the supplied
USB cable, and the image on the computer is projected.
s "Projecting with USB Display" p.31
• Connects the projector to a computer via the supplied
USB cable to use the Wireless Mouse function.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.64
E USB (TypeA) port
• Connects a USB memory device or a digital camera and
projects PDFs, movies, or images using Slideshow.
s "Projecting Without a Computer (Slideshow)"
p.52
• Connects the optional Document Camera.
F HDMI port
Inputs video signals from HDMI compatible video
equipment and computers. This projector is compatible
with HDCPg.
s "Connecting Equipment" p.24
G Audio port
Inputs audio from equipment connected to the Computer
port or the Video port.
nl
ow
D
oa
13
d
de
Part Names and Functions
m
fro
w
w
Screw to fix the lamp cover in place.
J Security slot
The security slot is compatible with the Microsaver
Security System manufactured by Kensington.
s "Anti-Theft Lock" p.74
e
I Lamp Cover Fixing
Screw
Base
.b
Receives signals from the remote control.
s "Remote control operating range" p.19
rre
bo
en
H Remote receiver
d
an
Function
.v
w
Name
Name
Function
A Ceiling mount fixing
points (three points)
Attach the optional attachment plate here when
suspending the projector from a ceiling.
s "Installing the Projector" p.21
s "Optional Accessories" p.121
B Rear feet
When setup on a surface such as a desk, turn to extend and
retract to adjust the horizontal tilt.
s "Adjusting the Horizontal Tilt" p.42
nl
ow
D
oa
14
d
de
Part Names and Functions
m
fro
w
w
Screw hole to fix the wireless LAN unit cover.
When installing the wireless LAN unit, make sure you
secure the wireless LAN unit cover with the screw
supplied.
e
D Screw hole for the
wireless LAN unit
cover
(EB-1776W/EB-1771W/
EB-1761W only)
Control Panel
.b
When setup on a surface such as a desk, extend the foot to
adjust the position of the image.
s "Adjusting the Image Position" p.41
rre
bo
en
C Front adjustable foot
d
an
Function
.v
w
Name
Name
Function
A [t] button
Turns the projector power on or off.
s "From Installation to Projection" p.29
B [Screen Fit] button
(EB-1776W only)
Adjusts the projected image so that it fits the screen frame.
s "Automatically Adjust to Fit into the Screen Frame Screen Fit - (EB-1776W only)" p.35
This button is disabled when the projector is suspended
from a ceiling.
C [Source Search]
button
Changes to the next input source that is sending an image.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.30
D [
• When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
• If pressed during projection of computer signal images,
it automatically adjusts the Tracking, Sync., and
Position to project the optimum image.
] button
nl
ow
D
oa
15
d
de
Part Names and Functions
m
fro
w
w
Displays and closes the Help screen which shows you how
to deal with problems if they occur.
s "Using the Help" p.97
G [Esc] button
• Stops the current function.
• If pressed when the Configuration menu is displayed, it
moves to the previous menu level.
s "Using the Configuration Menu" p.76
H [<][>] buttons
• Performs horizontal keystone correction.
s "Correcting keystone distortion in horizontal
directions" p.38
• If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s "Using the Configuration Menu" p.76
s "Using the Help" p.97
I [Menu] button
Displays and closes the Configuration menu.
s "Using the Configuration Menu" p.76
J [Focus] button
(EB-1776W only)
Adjusts the image focus.
s "Correcting the Focus" p.42
e
F [Help] button
Remote Control
.b
• Performs vertical keystone correction.
s "Correcting keystone distortion in vertical
directions" p.38
• If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s "Using the Configuration Menu" p.76
s "Using the Help" p.97
rre
bo
en
E [w][v] buttons
d
an
Function
.v
w
Name
nl
ow
D
oa
16
d
de
Part Names and Functions
m
fro
w
w
Changes to images from the Computer port.
C [Video] button
Each time the button is pressed, the image displayed
changes between the Video input port and HDMI input
port.
D [Screen Fit] button
Adjusts the projected image so that it fits the screen frame.
(EB-1776W only)
s "Automatically Adjust to Fit into the Screen Frame Screen Fit - (EB-1776W only)" p.35
When the projector is suspended from a ceiling or when
using EB-1771W/EB-1761W/EB-1751, this does not
function even if the button is pressed.
E [Focus] buttons
[l][r]
Adjusts the image focus. (EB-1776W only)
When using EB-1771W/EB-1761W/EB-1751, this does
not function even if the button is pressed.
s "Correcting the Focus" p.42
F [Auto] button
If pressed during projection of computer signal images, it
automatically adjusts the Tracking, Sync., and Position to
project the optimum image.
G [Aspect] button
The aspect ratio changes each time the button is pressed.
s "Changing the Aspect Ratio of the Projected Image"
p.45
H [Num] button
Hold down this button and press the numeric buttons to
enter passwords and numbers.
s "Setting Password Protect" p.71
I [Menu] button
Displays and closes the Configuration menu.
s "Using the Configuration Menu" p.76
][
]
• When the Configuration menu or the Help screen is
displayed, pressing these buttons selects menu items
and setting values.
s "Using the Configuration Menu" p.76
• During Wireless Mouse function, the mouse pointer
moves in the direction of the button that was pushed.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.64
[
K [
][
] buttons
] button
e
B [Computer] button
J [
.b
Turns the projector power on or off.
s "From Installation to Projection" p.29
Function
rre
bo
en
A [t] button
Name
d
an
Function
.v
w
Name
• When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
s "Using the Configuration Menu" p.76
• Acts as a mouse's left button when using the Wireless
Mouse function.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.64
L [User] button
Select any frequently used item from the five available
Configuration menu items, and assign it to this button. By
pressing the [User] button, the assigned menu item
selection/adjustment screen is displayed, allowing you to
make one-touch settings/adjustments.
s "Settings Menu" p.82
Power Consumption is assigned as the default setting.
M [Page] buttons
[[][]]
Changes pages in files such as PowerPoint files when using
the following projection methods.
• When using the Wireless Mouse function
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.64
• When using USB Display
s "Projecting with USB Display" p.31
• During a network connection (EB-1776W/EB-1771W/
EB-1761W only)
When projecting images or scenarios using Slideshow,
pressing these buttons displays the previous/next screen.
nl
ow
D
oa
17
d
de
Part Names and Functions
m
fro
w
w
Turns the video and audio on or off.
s "Hiding the Image and Sound Temporarily (A/V
Mute)" p.60
Q [Help] button
R [Freeze] button
Hold down this button and press the numeric buttons to
specify the ID using the remote control.
s "Correcting the Color Difference when Projecting
from Multiple Projectors" p.65
W [Color Mode] button
Each time the button is pressed, the Color Mode changes.
s "Selecting the Projection Quality (Selecting Color
Mode)" p.43
X Numeric buttons
Displays and closes the Help screen which shows you how
to deal with problems if they occur.
s "Using the Help" p.97
• Use this button to enter passwords and set IDs.
s "Correcting the Color Difference when
Projecting from Multiple Projectors" p.65
s "Setting Password Protect" p.71
• Use this button to enter numbers in Network settings
from the Configuration menu. (EB-1776W/EB-1771W/
EB-1761W only)
Y [LAN] button
Images are paused or unpaused.
s "Freezing the Image (Freeze)" p.61
Switches to the image from the network connected device.
(EB-1776W/EB-1771W/EB-1761W only)
Z [USB] button
Each time the button is pressed, the image displayed
changes between the following sources.
• USB Display
• Images from the device connected to the USB (TypeA)
port
a [Source Search]
button
Changes to the next input source that is sending an image.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.30
b Remote control lightemitting area
Outputs remote control signals.
Each time the button is pressed, the image changes
between projecting two images simultaneously by
splitting the projected screen, or projecting one image as
normal.
s "Projecting Two Images Simultaneously (Split Screen)
(EB-1776W/EB-1771W/EB-1761W Only)" p.49
S [Volume] buttons
[a][b]
[a] Decreases the volume.
[b] Increases the volume.
s "Adjusting the Volume" p.42
T [Pointer] button
Displays the on-screen pointer.
s "Pointer Function (Pointer)" p.61
U [Esc] button
• Stops the current function.
• If pressed when the Configuration menu is displayed, it
moves to the previous level.
s "Using the Configuration Menu" p.76
• Acts as a mouse's right button when using the Wireless
Mouse function.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.64
e
O [A/V Mute] button
P [Split] button
V [ID] button
.b
Enlarges or reduces the image without changing the
projection size.
s "Enlarging Part of the Image (E-Zoom)" p.63
Function
rre
bo
en
N [E-Zoom] buttons
[z][x]
Name
d
an
Function
.v
w
Name
nl
ow
D
oa
18
d
de
Part Names and Functions
m
fro
w
w
.v
w
rre
bo
en
d
an
Replacing the remote control batteries
e
.b
If delays in the responsiveness of the remote control occur or if it does not
operate after it has been used for some time, it probably means that the
batteries are becoming flat. When this happens, replace them with new
batteries. Have two AA size manganese or alkaline batteries ready. You
cannot use other batteries except for the AA size manganese or alkaline.
Attention
Make sure you read the following manual before handling the batteries.
s Safety Instructions
a
Caution
Remove the battery cover.
Check the positions of the (+) and (-) marks inside the battery holder to
ensure the batteries are inserted the correct way.
While pushing the battery compartment cover catch, lift the cover
up.
If the batteries are not used correctly, they could explode or leak causing
a fire, injury, or damage to the product.
c
b
Replace the old batteries with new batteries.
Replace the battery cover.
Press the battery compartment cover until it clicks into place.
nl
ow
D
oa
19
d
de
Part Names and Functions
m
fro
w
w
e
.b
rre
bo
en
d
an
.v
w
Remote control operating range
nl
ow
D
d
de
oa
m
fro
w
w
e
.b
rre
bo
en
d
an
This chapter explains how to install the projector and connect projection sources.
.v
w
Preparing the Projector
nl
ow
D
oa
21
d
de
Installing the Projector
m
fro
w
w
• Project images from behind a
translucent screen. (Rear projec‐
tion)
• Suspend the projector from the
ceiling and project images from
in front of a screen. (Front/Ceil‐
ing projection)
• Suspend the projector from the
ceiling and project images from
behind a translucent screen.
(Rear/Ceiling projection)
e
• Project images from in front of
the screen. (Front projection)
• A special method of installation is required when suspending the projector
from a ceiling (ceiling mount). If it is not installed correctly, it could fall
causing an accident and injury.
• If you use adhesives on the Ceiling mount fixing points to prevent the screws
from loosening, or if you use things such as lubricants or oils on the
projector, the projector case may crack causing it to fall from its ceiling
mount. This could cause serious injury to anyone under the ceiling mount
and could damage the projector.
When installing or adjusting the ceiling mount, do not use adhesives to
prevent the screws from loosening and do not use oils or lubricants and so
on.
• Do not cover the projector's air intake vent or air exhaust vent. If either of
the vents are covered, the internal temperature could rise and cause a fire.
.b
The projector supports the following four different projection methods.
Install the projector according to the conditions of the installation location.
rre
bo
en
Warning
d
an
.v
w
Installation Methods
Attention
Do not use the projector on its side. This may cause malfunctions to occur.
a
• An optional ceiling mount and attachment plate are required when
suspending the projector from a ceiling.
s "Optional Accessories" p.121
• The default Projection setting is Front. You can change from Front
to Rear from the Configuration menu.
s Extended - Projection p.84
• You can change the Projection mode as follows by pressing down
the [A/V Mute] button on the remote control for about five seconds.
FrontWFront/Ceiling
RearWRear/Ceiling
Installation methods
Install the projector as follows.
nl
ow
D
oa
22
d
de
Installing the Projector
m
fro
w
w
d
an
.v
w
Screen Size and Approximate Projection Distance
rre
bo
en
• Install the projector so that it is parallel to the screen.
If the projector is installed at an angle to the screen, keystone distortion
occurs in the projected image.
e
.b
Projection size is determined by the distance from the projector to the
screen. See the illustrations on the right to select the best position according
to the screen size. The illustrations show the approximate shortest distance
at maximum zoom. See the following for more information on the
projection distance.
s "Screen Size and Projection Distance" p.130
• Place the projector on a level surface.
If the projector is tilted the projected image is also tilted.
a
When you correct keystone distortion, the projected image may be
reduced.
For EB-1776W/EB-1771W/EB-1761W
16:10 Screen Size
150”
(320×200cm)
100”
(220×130cm)
a
80”
• See the following if you cannot install the projector parallel to the
screen.
s "Correcting Keystone Distortion" p.37
• See the following if you cannot install the projector on a level
surface.
s "Adjusting the Horizontal Tilt" p.42
s "Correcting Keystone Distortion" p.37
(170×110cm)
50”
(110×67cm)
5m
nl
ow
D
oa
23
d
de
Installing the Projector
m
fro
w
w
.v
w
rre
bo
en
d
an
For EB-1751
4:3 Screen Size
e
.b
150”
100”
80”
50”
5m
nl
ow
D
oa
24
d
de
Connecting Equipment
m
fro
w
w
e
.b
rre
bo
en
d
an
The port name, location, and connector orientation differ depending on the source being connected.
.v
w
This section gives examples of how to connect the projector and the projection source.
Connecting a Computer
To project images from a computer, connect the computer using one of the following methods.
A When using the supplied computer cable
Connect the computer's display output port to the projector's Computer port. You can output audio from the projector's speaker by connecting the audio output port on the computer
to the projector's Audio port using a commercially available audio cable.
B When using the supplied USB cable
Connect the computer's USB port to the projector's USB (TypeB) port using the supplied USB cable. You can send the computer's audio with the projected image.
C When using a commercially available HDMI cable
Connect the computer's HDMI port to the projector's HDMI port. You can send the computer's audio with the projected image.
a
Simply by connecting the projector to a computer via a USB cable, you can project images from the computer. This function is called USB Display.
s "Projecting with USB Display" p.31
nl
ow
D
oa
25
d
de
Connecting Equipment
m
fro
w
w
d
an
.v
w
rre
bo
en
Connecting Image Sources
e
.b
To project images from DVD players or VHS video and so on, connect to the projector using one of the following methods.
A When using a commercially available video cable
Connect the video output port on the image source to the projector's Video port. You can output audio from the projector's speaker by connecting the audio output port on the video
equipment to the projector's Audio port using a commercially available audio cable.
B When using the optional component video cable
s "Optional Accessories" p.121
Connect the component output port on the image source to the projector's Computer input port. You can output audio from the projector's speaker by connecting the audio output
port on the video equipment to the projector's Audio port using a commercially available audio cable.
C When using a commercially available HDMI cable
Connect the HDMI port on the image source to the projector's HDMI port. You can send the image source's audio with the projected image.
VIDEO
Y
Cb/Pb
Cr/Pr
L-Audio-R
Attention
• If the input source is on when you connect it to the projector, it could cause a malfunction.
• If the orientation or shape of the plug differs, do not try to force it in. The device could be damaged or could malfunction.
a
• If the source you want to connect to has an unusually shaped port, use the cable supplied with the device or an optional cable to connect to the projector.
• When using a commercially available 2RCA(L/R)/stereo mini-pin audio cable, make sure it is labeled "No resistance".
nl
ow
D
oa
26
d
de
Connecting Equipment
m
fro
w
w
rre
bo
en
d
an
.v
w
Connecting USB Devices
e
.b
You can connect devices such as USB memory, the optional Document Camera, and USB compatible hard disks and digital cameras.
Using the USB cable supplied with the USB device, connect the USB device to the USB (TypeA) port on the projector.
When the USB device is connected, you can project files on the USB memory or digital camera using Slideshow.
s "Slideshow examples" p.53
Attention
•
•
•
•
If you use a USB hub, the connection may not operate correctly. Devices such as digital cameras and USB devices should be connected to the projector directly.
When connecting and using a USB-compatible hard disk, make sure you connect the AC adaptor supplied with the hard disk.
Connect a digital camera or hard disk to the projector using a USB cable supplied with or specified for use with the device.
Use a USB cable less than 3 m in length. If the cable exceeds 3 m, Slideshow may not function correctly.
Removing USB devices
After finishing projecting, remove USB devices from the projector. For devices such as digital cameras or hard disks, turn off the device and then remove it from
the projector.
nl
ow
D
oa
27
d
de
Connecting Equipment
m
fro
w
w
d
an
.v
w
Remove the wireless LAN unit cover.
e
.b
a
rre
bo
en
Installing the Wireless LAN Unit
d
b
Install the wireless LAN unit.
c
Attach the wireless LAN unit cover, and then turn over the
projector.
Secure the wireless LAN unit cover with the screw supplied.
nl
ow
D
d
de
oa
m
fro
w
w
e
.b
rre
bo
en
d
an
This chapter explains how to project and adjust images.
.v
w
Basic Usage
nl
ow
D
oa
29
d
de
Projecting Images
m
fro
w
w
.v
Turn on your computer.
rre
bo
en
d
an
Change the computer's screen output.
.b
When using a laptop computer, you need to change the screen
output from the computer.
e
This section explains the procedure for connecting the projector to a
computer with the computer cable and projecting images.
e
f
w
From Installation to Projection
Hold down the Fn key (function key), and press the b key.
a
• The method for changing differs depending on the computer
being used. See the documentation supplied with the
computer.
• When turning off the projector, press the [t] button twice.
If the image is not projected, you can change the projected image using one
of the following methods.
• Press the [Source Search] button on the control panel or the remote
control.
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.30
• Press the button for the target port on the remote control.
s "Switching to the Target Image by Remote Control" p.31
a
After projecting the image, adjust the image if necessary.
s "Automatically Adjust to Fit into the Screen Frame - Screen Fit (EB-1776W only)" p.35
s "Correcting Keystone Distortion" p.37
a
b
c
d
Connect the projector to an electrical outlet with the power cord.
Connect the projector to the computer with the computer cable.
Turn on the projector.
Open the A/V mute slide.
s "Correcting the Focus" p.42
nl
ow
D
oa
30
d
de
Projecting Images
m
fro
w
w
d
an
The following screen is displayed while no image signals are input.
rre
bo
en
a
.v
w
Automatically Detect Input Signals and Change
the Projected Image (Source Search)
Example: EB-1776W/EB-1771W/EB-1761W
Using the remote control
Using the control panel
HDMI
LAN
USB
USB Display
* LAN is only available for EB-1776W/EB-1771W/EB-1761W
When two or more image sources are connected, press the [Source Search]
button until the target image is projected.
When your video equipment is connected, start playback before beginning
this operation.
e
.b
Press the [Source Search] button to project images from the port currently
receiving an image.
nl
ow
D
oa
31
d
de
Projecting Images
m
fro
w
w
You can use the supplied USB cable to connect the projector to a computer
to project images from the computer.
e
.b
Remote control
Projecting with USB Display
rre
bo
en
You can change directly to the target image by pressing the following
buttons on the remote control.
d
an
.v
w
Switching to the Target Image by Remote Control
You can project images and send audio with one USB cable.
To start USB Display, set USB Type B to USB Display from the
Configuration menu.
s Extended - USB Type B p.84
System requirements
For Windows
A Changes to images from the Computer port.
B Each time the button is pressed, it cycles through the images being input
from the following sources.
• Video port
• HDMI port
C Each time the button is pressed, it cycles through the following images:
• USB Display
• Images from the device connected to the USB (TypeA) port
D Switches to the image from the network connected device. (EB-1776W/
EB-1771W/EB-1761W only)
OS
CPU
Windows 2000*1
Windows XP
Professional 32 bit
Home Edition 32 bit
Tablet PC Edition 32 bit
Windows Vista
Ultimate 32 bit
Enterprise 32 bit
Business 32 bit
Home Premium 32 bit
Home Basic 32 bit
Windows 7
Ultimate 32/64 bit
Enterprise 32/64 bit
Professional 32/64 bit
Home Premium 32/64 bit
Home Basic 32 bit
Starter 32 bit
Mobile Pentium III 1.2 GHz or faster
Recommended: Pentium M 1.6 GHz or faster
nl
ow
D
oa
32
d
de
Projecting Images
m
fro
w
w
Resolution of no less than 640x480 and no higher
than 1600x1200.
Display color in 16-bit color or greater
e
Display
.b
20 MB or more
• You do not need to install the driver the next time you connect.
• When inputting images from multiple sources, change the input
source to USB Display.
• Use the supplied USB cable.
• If you use a USB hub, the connection may not operate correctly.
Connect the USB cable directly to the projector.
• You cannot change option settings while using USB Display.
rre
bo
en
Hard Disk Space
a
d
an
256 MB or more
Recommended: 512 MB or more
.v
w
Amount of Memory
*1 Service Pack 4 only
For Mac OS X
For Windows
OS
Mac OS X 10.5.x 32 bit
Mac OS X 10.6.x 32/64 bit
Mac OS X 10.7.x 32/64 bit
CPU
Power PC G4 1GHz or faster
Recommended: Core Duo 1.83GHz or faster
Amount of Memory
512 MB or more
Hard Disk Space
20 MB or more
Display
Resolution of no less than 640x480 and no higher than
1680x1200.
Display color in 16-bit color or greater
a
Connect the computer's USB port to the projector's USB (TypeB)
port using a USB cable.
a
For Windows 2000 or Windows XP, a message asking you if
you want to restart your computer may be displayed. Select
No.
For Windows 2000
Double-click Computer, EPSON PJ_UD, and then
EMP_UDSE.EXE.
For Windows XP
Driver installation starts automatically.
Connecting for the first time
The first time you connect the projector and the computer using the USB
cable, the driver needs to be installed. The procedure is different for
Windows and Mac OS X.
For Windows Vista/Windows 7
When the dialog box is displayed, click Run EMP_UDSE.exe.
b
c
When the License Agreement screen is displayed, click Agree.
d
Disconnect the USB cable when you finish projection.
Computer images are projected.
It may take a while before computer images are projected. Until
computer images are projected, leave the equipment as it is and do
not disconnect the USB cable or turn off the power to the projector.
nl
ow
D
oa
33
d
de
Projecting Images
m
fro
w
w
.v
When you have finished projecting, select Disconnect from the
menu bar or from the USB Display icon on the Dock. You can
then disconnect the USB cable.
.b
rre
bo
en
d
an
• If it is not installed automatically, double-click My Computer
- EPSON_PJ_UD - EMP_UDSE.EXE on your computer.
e
a
f
w
When disconnecting the USB cable, there is no need to use Safely
Remove Hardware.
a
• If nothing is projected for some reason, click All Programs EPSON Projector - Epson USB Display - Epson USB
Display Vx.xx on your computer.
• When using a computer running Windows 2000 under user
authority, a Windows error message is displayed and you may
not be able to use the software. In this case, try updating
Windows to the latest version, restart, and then try to connect
again.
For more details, contact your local dealer or the nearest
address provided in the following document.
s Epson Projector Contact List
• If the USB Display setup folder is not displayed automatically
in the Finder, double-click EPSON PJ_UD - USB Display
Installer on your computer.
• If nothing is projected for some reason, click the USB
Display icon in the Dock.
• If there is no USB Display icon in the Dock, start USB
Display from the Applications folder.
• If you select Exit from the USB Display icon menu on the
Dock, USB Display does not start automatically when you
connect the USB cable.
Uninstalling
For Mac OS X
For Windows 2000
a
a
b
c
d
Connect the computer's USB port to the projector's USB (TypeB)
port using a USB cable.
The Setup folder of USB Display is displayed in the Finder.
b
c
d
e
Double-click the USB Display Installer icon.
Follow the on-screen instructions to install.
When the License Agreement screen is displayed, click Agree.
Click Start, select Settings, and then click Control Panel.
Double-click Add/Remove Programs.
Click Change or Remove Programs.
Select Epson USB Display and click Change/Remove.
Enter the administrator authority password and start the installation.
For Windows XP
When the installation is complete, the USB Display icon is displayed
in the Dock and menu bar.
a
b
c
Computer images are projected.
It may take a while before computer images are projected. Until
computer images are projected, leave the equipment as it is and do
not disconnect the USB cable or turn off the power to the projector.
Click Start, and then click Control Panel.
Double-click Add or Remove Programs.
Select Epson USB Display and click Remove.
nl
ow
D
oa
34
d
de
Projecting Images
m
fro
w
w
For Mac OS X
a
b
Open the Applications folder, double-click USB Display, and then
double-click Tool.
Run USB Display UnInstaller.
e
Select Epson USB Display and click Uninstall.
.b
Click Uninstall a program under Programs.
rre
bo
en
Click Start, and then click Control Panel.
d
an
a
b
c
.v
w
For Windows Vista/Windows 7
nl
ow
D
oa
35
d
de
Adjusting Projected Images
m
fro
w
w
• The projected image cannot be adjusted correctly if this range is
exceeded. Correct the projected image manually.
• Screen Fit is unavailable when the projector is suspended from a
ceiling. Correct the projected image manually.
Screen Fit is a function that corrects the projected image so that it fits to
the frame (border) of the screen, whiteboard, and so on. When you press
the [Screen Fit] button on the remote control or control panel, the
projected image is adjusted to fit the frame of the screen while also
performing keystone correction and focus adjustments.
You can use Screen Fit to correct the projected image under the following
conditions.
Screen size: less than or equal to 100"
Distance between projector and screen: approx. 1.0 to 2.5 m
Correction angle: approx. 20˚ right and left/approx. 30˚ up and down
e
.b
rre
bo
en
d
an
a
.v
w
Automatically Adjust to Fit into the Screen Frame
- Screen Fit - (EB-1776W only)
a
Press the [Screen Fit] button on the remote control or the control
panel during projection.
Using the remote control
Using the control panel
nl
ow
D
oa
36
d
de
Adjusting Projected Images
m
fro
w
w
Once the adjustment screen appears, do not move the projector
or block the image. The projected image will not be corrected
properly.
e
.b
rre
bo
en
a
d
an
Adjust the zoom ring so that the yellow frame is bigger than the
screen frame as shown below. Position the black message box in
the center of the screen.
.v
w
b
d
After the correction is performed, the following message appears.
To exit the correction menu, press the [Esc] button on the remote
control or the control panel to clear the message.
To make fine adjustments after the initial adjustment, press the
[
If the yellow frame is still within the screen frame even after
adjusting the zoom ring to its maximum size, try moving the
projector further away from the screen.
c
Press the [Screen Fit] button or the [
] button.
After the adjustment screen appears, the projected image is corrected
according to the aspect ratiog of the image being input.
][
][
][
] buttons on the control panel.
If no operation is performed, the message closes after about seven
seconds.
After performing Screen Fit, Keystone on the Configuration menu is
set to Quick Corner. After this, any correction of the projected
image using the [
][
][
][
] buttons on the control panel is
performed using the Quick Corner function.
s "Correcting manually - Quick Corner -" p.39
nl
ow
D
oa
37
d
de
Adjusting Projected Images
m
fro
w
w
w
e
.b
rre
bo
en
d
an
• Screen Fit may not function correctly in dark rooms such as
rooms with the lights turned off. In this situation, try
performing Screen Fit again after turning on the lights.
• Because Screen Fit relies on a sensor, it may not function
correctly depending on the status of the projection screen (if
it is curved or patterned and so on) or if the room is open to
daylight. In this case, make the adjustments manually.
s "Correcting manually - manual H/V-Keystone -" p.38
• Correcting manually (manual H/V-Keystone)
Manually correct distortion in the horizontal and vertical directions
independently.
.v
a
• When Screen Fit detects more than two sides of a frame
inside the projection area, it adjusts to fit the detected frame.
For example, when projecting onto a wide screen in a small
room, you can make corrections by fitting the top and bottom
sides of the screen into the projected area.
• Correcting manually (Quick Corner)
Manually correct the four corners independently.
Correcting Keystone Distortion
You can correct keystone distortion using one of the following methods.
• Correcting automatically
-Auto H/V-Keystone (EB-1776W only)
-Auto V-Keystone (EB-1771W/EB-1761W/EB-1751 only)
a
When you correct keystone distortion, the projected image may be
reduced.
Correcting automatically - Auto H/V-Keystone - (EB-1776W only)
When the projector detects any movement, for example when it is moved
or tilted, it automatically corrects vertical and horizontal keystone distortion
as well as the focus. This function is called Auto H/V-Keystone.
nl
ow
D
oa
38
d
de
Adjusting Projected Images
m
fro
w
w
w
Correcting keystone distortion in vertical directions
e
.b
a
rre
bo
en
• Correction angle: approx. 20˚ right and left/approx. 30˚ up and down
d
an
You can use Auto H/V-Keystone to correct the projected image under the
following conditions.
• Correction angle: approx 30˚ right and left/approx. 45˚ up and down
.v
When the projector is moved, it displays a screen for adjustment and then
automatically corrects the projected image.
Press the [
][
] buttons on the control panel.
• Auto H/V-Keystone only works when Projection is set to Front
from the Configuration menu.
s Extended - Projection p.84
• If you do not want to use the Auto H/V-Keystone function, set Auto
H/V-Keystone to Off.
s Settings - Keystone - H/V-Keystone - Auto H/V-Keystone
p.82
Correcting automatically - Auto V-Keystone - (EB-1771W/
EB-1761W/EB-1751 only)
When using EB-1771W/EB-1761W/EB-1751, only the vertical direction is
corrected automatically. If you need to correct the horizontal direction, use
manual H/V-Keystone.
You can use Auto V-Keystone to correct the projected image under the
following conditions.
• Correction angle: approx. 30˚ up and down
Correcting manually - manual H/V-Keystone Manually correct distortion in the horizontal and vertical directions
independently. H/V-Keystone correction is ideal for fine-tuning keystone
distortion.
You can use H/V-Keystone to correct the projected image under the
following conditions.
Correcting keystone distortion in horizontal directions
Press the [
][
] buttons on the control panel.
nl
ow
D
oa
39
d
de
Adjusting Projected Images
m
fro
w
w
d
an
.v
w
You can set manual H/V-Keystone from the Configuration menu.
rre
bo
en
a
s Settings - Keystone - H/V-Keystone p.82
e
.b
Correcting manually - Quick Corner This allows you to manually correct each of the four corners of the
projected image separately.
a
Press the [Menu] button while projecting.
s "Using the Configuration Menu" p.76
Using the remote control
b
Using the control panel
c
Select Quick Corner, and then press the [
d
Using the [
] button.
Select Keystone from Settings.
], [
remote control, or the [
], [
], [
], and [
], [
] buttons on the
], and [
] buttons on the
control panel, select the corner to correct, and then press the [
button.
]
nl
ow
D
oa
40
d
de
Adjusting Projected Images
m
fro
w
w
e
.b
rre
bo
en
d
an
.v
w
e
Using the [
], [
remote control, or the [
], [
], [
], and [
], [
f
Repeat procedures 4 and 5 as needed to adjust any remaining
corners.
g
When you are done, press the [Esc] button to exit the correction
menu.
] buttons on the
], and [
] buttons on the
control panel, correct the position of the corner.
If the message "Cannot adjust any further." is displayed while
adjusting, you cannot adjust the shape any further in the direction
indicated by the gray triangle.
Because Keystone was changed to Quick Corner, the corner
selection screen from step 4 is displayed when you press the [
[
], [
], or [
],
] button on the control panel next time. Change
Keystone to H/V-Keystone if you want to perform horizontal and
vertical correction using the [
], [
], [
], and [
the control panel.
s Settings - Keystone - H/V-Keystone p.82
] buttons on
nl
ow
D
oa
41
d
de
Adjusting Projected Images
m
fro
w
w
.v
w
• When Auto H/V-Keystone is set to On, the message "Do you
want to perform Auto H/V-Keystone correction?" is displayed
when the projector is moved. (EB-1776W only)
After you perform this function, the Keystone setting changes
from Quick Corner to H/V-Keystone, after which pressing
], or [
e
], [
.b
], [
rre
bo
en
the [
d
an
a
] button on the control panel
performs H/V-Keystone.
s Settings - Keystone - H/V-Keystone p.82
T
W
• If the [Esc] button is held down for about two seconds while
the corner selection screen from step 4 is displayed, the
following screen is displayed.
Adjusting the Image Position
Reset Quick Corner: Resets the result of Quick Corner
corrections.
Switch to H/V-Keystone: Switches the correction method to
H/V-Keystone.
s "Settings Menu" p.82
Press the foot adjust lever to extend and retract the front adjustable foot.
You can adjust the position of the image by tilting the projector up to 14
degrees.
Adjusting the Image Size
Turn the zoom ring to adjust the size of the projected image.
a
The larger the angle of tilt, the harder it becomes to focus. Install the
projector so that it only needs to be tilted at a small angle.
nl
ow
D
oa
42
d
de
Adjusting Projected Images
m
fro
w
w
d
an
.v
w
rre
bo
en
Adjusting the Horizontal Tilt
e
.b
Extend and retract the rear feet to adjust the projector's horizontal tilt.
A Extend the rear foot.
B Retract the rear foot.
Adjusting the Volume
You can adjust the volume using one of the following methods.
Correcting the Focus
You can correct the focus using one of the following methods.
• Press the [Focus] button on the control panel or the remote control to
adjust the focus. (EB-1776W only)
• Turn the focus ring to adjust the focus. (EB-1771W/EB-1761W/EB-1751
only)
• Press the [Volume] buttons on the remote control to adjust the volume.
Remote control
[a] Decreases the volume.
[b] Increases the volume.
nl
ow
D
oa
43
d
de
Adjusting Projected Images
m
fro
w
w
Even if you are projecting onto a blackboard
(greenboard), this setting gives your images a
natural tint, just like when projecting onto a screen.
Whiteboard
Ideal for making presentations using a whiteboard.
Customized
Select Customized if you want to adjust the R, G,
B, C, M, and Y settings in the Color Adjustment
submenu of the Configuration menu.
DICOM SIM *1*3
Ideal for projecting X-ray photographs and other
medical images. This produces images with clear
shadows. The projector is not a medical device and
cannot be used for medical diagnosis.
.b
e
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume
before powering off, so that you can power on and then gradually increase the
volume.
Selecting the Projection Quality (Selecting Color
Mode)
You can easily obtain the optimum image quality simply by selecting the
setting that best corresponds to your surroundings when projecting. The
brightness of the image varies depending on the mode selected.
Dynamic
rre
bo
en
Blackboard
Caution
Mode
Application
d
an
Mode
.v
w
• Adjust the volume from the Configuration menu.
s Settings - Volume p.82
Application
Ideal for use in a bright room. This is the brightest
mode, and reproduces shadow tones well.
Presentation
Ideal for making presentations using color materials
in a bright room.
Theatre
Ideal for watching films in a dark room. Gives
images a natural tone.
Photo*1
Ideal for projecting still pictures, such as photos, in
a bright room. The images are vivid and brought
into contrast.
Sports *2
Ideal for watching TV programmes in a bright
room. The images are vivid and brought to life.
sRGB
Ideal for images that conform to the sRGBg color
standard.
*1 This selection is only available when the input signal is RGB or when the
source is USB Display, USB, or LAN. (Depending on the model used, some
sources are not supported.)
*2 This selection is only available when the input signal is component video, or
when the source is Video.
*3 The effects may not be reproduced correctly according to your settings and
screen specifications.
Each time you press the [Color Mode] button, the Color Mode name is
displayed on the screen and the Color Mode changes.
Remote control
nl
ow
D
oa
44
d
de
Adjusting Projected Images
m
fro
w
w
You can set Color Mode from the Configuration menu.
rre
bo
en
s Image - Color Mode p.80
Setting Auto Iris
d
an
.v
w
a
e
.b
By automatically setting the luminance according to the brightness of the
displayed image, it lets you enjoy deep and rich images.
a
Press the [Menu] button.
s "Using the Configuration Menu" p.76
Using the remote control
b
Select Auto Iris from Image.
c
Select On.
Using the control panel
The setting is stored for each Color Mode.
nl
ow
D
oa
45
d
de
Adjusting Projected Images
m
fro
w
w
For EB-1776W/EB-1771W/EB-1761W
e
Changing the Aspect Ratio of the Projected Image
.b
Auto Iris can be set only when the Color Mode is Dynamic,
Theatre, or Customized.
rre
bo
en
a
Changing the aspect ratio for images from video equipment or
from the HDMI port
d
an
Press the [Menu] button to finish making settings.
.v
w
d
Each time the button is pressed, the aspect ratio changes in the order of
Normal or Auto, 16:9, Full, Zoom, and Native.
Change the aspect ratiog when video equipment is connected so that
images that have been recorded in digital video or onto DVDs can be
viewed in 16:9 wide-screen format. Change the aspect ratio when projecting
computer images at full size.
Available Aspect Modes vary depending on the image signal currently being
projected.
The changing methods and the types of Aspect Modes are as follows.
Changing methods
Each time you press the [Aspect] button, the Aspect Mode name is
displayed on the screen and the aspect ratio changes.
Remote control
A
B
C
D
E
Normal or Auto
16:9
Full
Zoom
Native
For EB-1751
Each time the button is pressed, the aspect ratio changes in the order Auto
(only when the input source is HDMI), 4:3, and 16:9.
a
You can set the aspect ratio from the Configuration menu.
s Signal - Aspect p.81
nl
ow
D
oa
46
d
de
Adjusting Projected Images
m
fro
w
w
.v
w
Input Signal
rre
bo
en
d
an
Aspect mode
XGA 1024X768(4:3)
e
.b
Full
WXGA 1280X800(16:10)
A Auto (only when the input source is HDMI)
B 4:3*
C 16:9
* When a 720p/1080i/1080p signal is input, the display is in a zoomed 4:3 format
(the image is cut off on the right and left sides).
Zoom
Native
Changing the aspect ratio for computer images
For EB-1776W/EB-1771W/EB-1761W
Each time the button is pressed, the aspect ratio changes in the order of
Normal, 16:9, Full, Zoom, and Native.
Aspect mode
Input Signal
XGA 1024X768(4:3)
Normal
WXGA 1280X800(16:10)
For EB-1751
Each time the button is pressed, the aspect ratio changes in the order
Normal, 4:3, and 16:9.
Aspect mode
Input Signal
XGA 1024X768(4:3)
Normal
16:9
WXGA 1280X800(16:10)
nl
ow
D
oa
47
d
de
Adjusting Projected Images
m
fro
w
w
WXGA 1280X800(16:10)
e
.b
4:3
rre
bo
en
XGA 1024X768(4:3)
d
an
Input Signal
.v
w
Aspect mode
16:9
a
If parts of the image are missing, set the Resolution setting to Wide
or Normal from the Configuration menu, according to the size of the
computer panel.
s Signal - Resolution p.81
nl
ow
D
d
de
oa
m
fro
w
w
e
.b
rre
bo
en
d
an
This chapter explains useful tips for giving presentations, and the Security functions.
.v
w
Useful Functions
nl
ow
D
oa
49
d
de
Projection Functions
m
fro
w
w
Left Screen
Right Screen
HDMI
USB Dis‐ USB
play
e
.b
Comput‐ Video
er
rre
bo
en
d
an
You can simultaneously project images from two sources on the right and
left of the screen.
.v
w
Projecting Two Images Simultaneously (Split
Screen) (EB-1776W/EB-1771W/EB-1761W Only)
USB Display
LAN
-
-
-
USB
-
-
-
LAN
-
-
-
Operating procedures
Projecting on a split screen
a
Press the [Split] button while projecting.
The currently selected input source is projected on the left of the
screen.
Remote control
Input sources for split screen projection
The combinations of input sources that can be projected on a split screen
are listed below.
Left Screen
Right Screen
Comput‐ Video
er
Computer
Video
HDMI
HDMI
USB Dis‐ USB
play
LAN
-
a
You can perform the same operations from the configuration
menu.
s Settings - Split Screen p.82
nl
ow
D
oa
50
d
de
Projection Functions
m
fro
w
w
d
Select the Source, and then press the [
] button.
The Source screen is displayed.
Select each input source for Left and Right.
Select Execute, and then press the [
] button.
To switch the source during split screen projection, start the
procedure from step 2.
Switching the left and right screens
Use the following procedure to switch the projected images displayed on
the left and right screens.
a
b
Only input sources that can be combined can be selected.
Source Search button
Computer button
Video button
USB button
LAN button
e
c
•
•
•
•
•
.b
e
The Source screen is also displayed when the following buttons
are pressed during split screen projection.
rre
bo
en
a
The Split Screen Setup screen is displayed.
d
an
Press the [Menu] button.
.v
w
b
Press the [Menu] button during split screen projection.
Select Swap Screens, and then press the [
] button.
The projected images on the left and right are swapped.
Switching the left and right image sizes
s "Input sources for split screen projection" p.49
a
Press the [Menu] button during split screen projection.
nl
ow
D
oa
51
d
de
Projection Functions
m
fro
w
w
]
e
.b
Select the screen size you want to display, and then press the [
button.
• You cannot enlarge both the left screen and right screen images at
the same time.
• When one image is enlarged, the other image is reduced.
• Depending on the video signals that are input, the images on the left
and right may not appear to be the same size even if Equal is
set.
rre
bo
en
a
] button.
d
an
Select Screen Size, and then press the [
.v
w
b
c
Ending the split screen
To end split screen, press the [Esc] button.
The following steps can also be used to end the split screen.
The projected images will appear as shown below after setting the screen
size.
Equal
Larger Left
• Press the [Split] button on the remote control.
• Select Exit Split Screen from the configuration menu.
s Settings - Split Screen Setup p.82
Restrictions during split screen projection
Operating restrictions
The following operations cannot be performed during split screen
projection.
Larger Right
•
•
•
•
•
Setting the configuration menu
E-Zoom
Switching the aspect mode (The aspect mode will be set to Normal.)
Operations using the [User] button on the remote control
Auto Iris
Help can be displayed only when image signals are not input or when an
error or warning notification is displayed.
nl
ow
D
oa
52
d
de
Projection Functions
m
fro
w
w
.v
w
Restriction relating to images
• The default values for the Image menu are applied to the image on the
right screen. However, the settings for the image projected on the left
screen are applied to the image on the right screen for Color Mode,
Abs. Color Temp., and Color Adjustment.
rre
bo
en
d
an
Specifications for files that can be projected using Slideshow
File Type (Ex‐
tension)
Notes
Image
.jpg
• When there is no image signal input, the display screen will be the
color that is set in Display Background. When Logo is selected, the
display is Blue.
The following cannot be projected.
- CMYK color mode formats
- Progressive formats
- Images with a resolution greater than 8192x8192
Due to the characteristics of JPEG files, images may
not be projected clearly if the compression ratio is
too high.
.bmp
• When A/V Mute is performed, the display is Black.
Cannot project images with a resolution greater
than 1280x800.
.gif
• Cannot project images with a resolution greater
than 1280x800.
• Cannot project animated GIFs.
.png
Cannot project images with a resolution greater
than 1280x800.
Movie
.avi
• Cannot project images with a resolution greater
than 1280 x 720.
• The audio format can only playback linear PCM
and ADPCM.
Scenario
file
.fse
PowerPoint files are converted to this format in
EasyMP Slide Converter.
PDF con‐
tents
.pdf
(EB-1776W/
EB-1771W/
EB-1761W only)
• You can project PDF files version 1.7 or earlier.
• Cannot project encrypted PDFs.
e
• The setting value Off for Progressive and Noise Reduction is applied
to the image on the right screen.
s "Signal Menu" p.81
Projecting Without a Computer (Slideshow)
By connecting a USB storage device such as a USB flash drives or a USB
hard disk to the projector, you can project the files stored on the device
without using a computer. This function is called Slideshow.
You can make presentations with just a USB storage device and the
projector by converting PowerPoint files to scenarios using the supplied
EasyMP Slide Converter, and then saving them to the USB storage device.
a
• You may not be able to use USB storage devices that incorporate
security functions.
• You cannot correct keystone distortion while projecting a Slideshow,
even if you press the [
control panel.
], [
], [
], or [
.b
Type
] button on the
a
• When connecting and using a USB-compatible hard disk, make sure
you connect the AC adaptor supplied with the hard disk.
• The projector does not support some file systems, so use media that
has been formatted in Windows.
• Format the media in FAT16/32.
nl
ow
D
oa
53
d
de
Projection Functions
m
fro
w
w
Slideshow operating methods
rre
bo
en
d
an
Projecting images stored on USB storage
.v
w
Slideshow examples
e
.b
Although the following steps are explained based on the remote control,
you can perform the same operations from the control panel.
Starting Slideshow
s "Projecting images or movies" p.55
s "Projecting image files in a folder in sequence (Slideshow)" p.58
Projecting PowerPoint files converted in EasyMP Slide Converter
See the following manual for more information on converting PowerPoint
files to scenarios using EasyMP Slide Converter.
s EasyMP Slide Converter Operation Guide
a
Change the projected image to USB.
b
Connect the USB storage device to the projector.
s "Switching to the Target Image by Remote Control" p.31
s "Connecting USB Devices" p.26
Slideshow starts and the file list screen is displayed.
nl
ow
D
oa
54
d
de
Projection Functions
m
fro
w
w
e
.b
rre
bo
en
• Other files or folders are displayed as icons as shown in the
following table.
Icon
• When AutoRun is set for a scenario, it is automatically played back
with the highest priority over other input sources. To stop playback,
press the [Esc] button on the remote control.
• You can also insert a memory card into a USB card reader and then
connect the reader to the projector. However, some commercially
available USB card readers may not be compatible with the
projector.
• If the following screen (Select Drive screen) is displayed, press the
d
an
a
.v
w
• The following files are displayed as thumbnails (file contents are
displayed as small images).
- JPEG files
- FSE files (an image of the first slide)
- PDF files (an image of the first page of the PDF)
- AVI files (an image 15 seconds from the start of the movie)
File
[
FSE files*
BMP files
want to use, and then press the [
JPEG files*
GIF files
AVI (Motion JPEG)
files*
PNG files
File
Icon
], [
], [
], or [
] button to select the drive you
] button.
PDF files*
*
• To display the Select Drive screen, position the cursor on Select
Drive at the top of the file list screen, and then press the [ ]
button.
When it cannot be displayed as a thumbnail, it is displayed as an icon.
Projecting images
a
Press the [
], [
], [
or folder you want to project.
], or [
] button to select the file
nl
ow
D
oa
55
d
de
Projection Functions
m
fro
w
w
.v
w
While projecting, press the [
] or [
] button.
e
.b
rre
bo
en
d
an
b
a
If not all of the files and folders are displayed on the current
screen, press the []] button on the remote control, or position
the cursor on Next Page at the bottom of the screen and press
the [ ] button.
To return to the previous screen, press the [[] button on the
remote control, or position the cursor on Previous Page at the
top of the screen and press the [ ] button.
b
Press the [
Stopping Slideshow
To close Slideshow, disconnect the USB device from the USB port on the
projector. For devices such as digital cameras or hard disks, turn off the
device and then remove it from the projector.
] button.
The selected image is displayed.
When a folder is selected, the files in the selected folder are
displayed. To return to the previous screen, position the cursor on
Back to Top and press the [ ] button.
Projecting images or movies
Attention
Do not disconnect the USB storage device while it is being accessed.
Slideshow may not operate correctly.
Rotating images
You can rotate the played images in 90˚ increments. The rotating function
is also available during Slideshow.
a
a
Start Slideshow.
The file list screen is displayed.
s "Starting Slideshow" p.53
Display images or run Slideshow.
nl
ow
D
oa
56
d
de
Projection Functions
m
fro
w
w
w
• Projecting a movie: Press the [Esc] button to display the message
screen, select Exit, and then press the [ ] button.
], [
], or [
] button to select the
rre
bo
en
], [
d
an
.v
b
Press the [
image file you want to project.
e
.b
When projection is finished, you are returned to the file list screen.
Projecting PDF files (EB-1776W/EB-1771W/EB-1761W only)
You can project PDF files using slideshow. In PDF files, you can move
pages up or down, enlarge, or rotate.
a
Start Slideshow.
The file list screen is displayed.
s "Starting Slideshow" p.53
c
b
Press the [
] button.
Press the [
], [
], [
], or [
] button to select the PDF
file you want to project.
The image is displayed or the movie is played back.
a
Press the [
][
] buttons to move to the next or previous
image file.
finish projecting, perform one of the following operations.
d •ToProjecting
an image: Press the [Esc] button.
a
If the file extension is not .pdf, the file is not displayed in the
file list.
nl
ow
D
oa
57
d
de
Projection Functions
m
fro
w
w
w
] button.
• Selecting a page
Press the [Esc] button to display the select page menu.
The first page in the PDF file is displayed at full screen size.
e
.b
rre
bo
en
d
an
Press the [
.v
c
You can perform the following operations while a PDF file is displayed.
• Page Up/Down
While a page is displayed at full screen size, press the [
[
] button to go to the previous or next page.
] or
Select the page you want to project using the [
] or [
] button, and
then press the [ ] button to display the selected page.
If you press the [Esc] button while the select page menu is displayed, the
menu closes.
• Expanding a page
While a page is displayed at full screen size, press the [ ] button to
expand the image.
Portrait pages are expanded horizontally to fit the width of the screen,
and landscape pages are expanded vertically to fit the height of the
screen.
While a page is displayed at expanded size, press the [ ] button to
return to standard full screen size display.
• Scrolling a page
While a page is displayed at expanded size, press the [
[
], or [
] button to scroll the page.
], [
],
nl
ow
D
oa
58
d
de
Projection Functions
m
fro
w
w
] button
To change files automatically when you run Slideshow, set Screen
Switching Time from Option in Slideshow to anything other than No.
The default setting is 3 seconds.
.b
rre
bo
en
] or [
d
an
While a page is displayed at full screen size, press the [
a
.v
w
• Rotating a page
a
Closing PDF file display
a
b
c
e
to rotate all pages in the PDF by 90 degrees.
Start Slideshow.
The file list screen is displayed.
s "Starting Slideshow" p.53
Press the [Esc] button while a PDF file is being displayed.
The select page menu is displayed.
Press the [
Press the [
] or [
] button to select Exit.
The following operations cannot be performed while viewing a PDF in
Slideshow.
-
Press the [
], [
], [
], or [
] button to position the
cursor over the folder for the Slideshow that you want to run, and
then press the [ ] button.
] button.
The PDF file being displayed closes and the file select screen is
displayed.
a
b
Releasing a password
Displaying e-signatures
Displaying JPEG2000 images
Displaying transparent effects
Playing multi media contents
Displaying 3D artwork
Displaying comments
Projecting image files in a folder in sequence (Slideshow)
You can project the image files in a folder in sequence, one at a time. This
function is called Slideshow. Use the following procedure to run
Slideshow.
c
Select Slideshow at the bottom right of the file list screen, and
then press the [ ] button.
Slideshow starts, and the image files in the folder are automatically
projected in sequence, one at a time.
When the last file is projected, the file list is displayed again
automatically. If you set Continuous Play to On in the Option
window, projection starts again from the beginning when it reaches
the end.
s "Image file display settings and Slideshow operation settings"
p.59
You can proceed to the next screen, return to the previous screen, or
stop playback while projecting a Slideshow.
nl
ow
D
oa
59
d
de
Projection Functions
m
fro
w
w
.v
w
To stop playback
e
] button, or the []] button to display the next
.b
] button, the [
rre
bo
en
[
When you press the [Esc] button, the message
"Do you want to quit playing the scenario?" is
displayed. Close by selecting Exit and pressing
the [ ] button.
file.
Playing a scenario
a
Continue playback by selecting Return and
pressing the [ ] button.
Start Slideshow.
The file list screen is displayed.
The following functions can be used when projecting a scenario or image
file with Slideshow.
s "Starting Slideshow" p.53
b
c
E Previous slide or animation
(animation effects are not played.)
d
an
a
If Screen Switching Time on the Option screen is set to No, files do
not change automatically when you select Play Slideshow. Press the
Press the [
], [
], [
], or [
] button to select the
• Freeze
s "Freezing the Image (Freeze)" p.61
scenario you want to playback.
• A/V Mute
s "Hiding the Image and Sound Temporarily (A/V Mute)" p.60
Press the [
• E-Zoom
s "Enlarging Part of the Image (E-Zoom)" p.63
] button.
Playback starts.
• Pointer
s "Pointer Function (Pointer)" p.61
Operations while playing a scenario
To switch screens
A
B
C
D
Next slide
Previous slide
Next slide or animation
Next slide or animation
(animation effects are not played.)
Image file display settings and Slideshow operation settings
You can set the file display order and Slideshow operations on the Option
screen.
a
Press the [
][
][
][
] button to position the cursor
over the folder where you want to set display conditions and press
nl
ow
D
oa
60
d
de
Projection Functions
m
fro
w
w
The following table shows the details for each item.
], or [
] button to position the cursor over OK, and
e
] button to
], [
.b
Select any of the options as necessary and press the [
enable settings.
[
],
rre
bo
en
When the following Option screen is displayed, set each of the
items.
When you have finished making settings, press the [
d
an
b
c
.v
w
the [Esc] button. Select Option from the submenu displayed, then
press the [ ] button.
then press the [
] button.
The settings are applied.
If you do not want to apply the settings, position the cursor on
Cancel, and then press the [ ] button.
Hiding the Image and Sound Temporarily (A/V
Mute)
You can use this when you want to focus the audience's attention on what
you are saying, or if you do not want to show details such as when you are
changing between files during presentations from a computer.
Display Order
You can select to display the files in Name Order or
Date Order.
Sort Order
You can select to sort the files In Ascending or In
Descending order.
Continuous Play
You can set whether to repeat the Slideshow.
Screen Switching
Time
You can set the time before a file switches to the next file
in Slideshow. You can set a time between No (0) to 60
Seconds. When you set No, auto play is disabled.
Effect
You can set the screen effects when changing slides.
nl
ow
D
oa
61
d
de
Projection Functions
m
fro
w
w
rre
bo
en
Each time you press the [Freeze] button, Freeze turns on or off.
e
.b
Projector
between files during presentations from a computer without projecting any
images if the Freeze function is activated beforehand.
d
an
Remote control
.v
w
Each time you press the [A/V Mute] button or open/close the lens cover,
A/V Mute turns on or off.
Remote control
a
• When projecting moving images, the images and sound continue to
be played back while A/V Mute is on. It is not possible to resume
projection from the point where A/V Mute was activated.
• You can select the screen displayed when the [A/V Mute] button is
pressed from the Configuration menu.
s Extended - Display - A/V Mute p.84
• When the A/V mute slide is closed for approximately 30 minutes,
Lens Cover Timer activates and the power is automatically turned
off. If you do not want Lens Cover Timer to activate, set Lens Cover
Timer to Off.
s Extended - Operation - Lens Cover Timer p.84
• The lamp is still lit during A/V Mute, so the lamp hours continue to
accumulate.
a
• Audio does not stop.
• When projecting moving images, the images continue to be played
back while the screen is frozen. It is not possible to resume
projection from the point where the screen was frozen.
• If the [Freeze] button is pressed while the Configuration menu or
the Help screen is displayed, the menu or the Help screen that is
displayed is closed.
• Freeze still works while E-Zoom is being used.
Pointer Function (Pointer)
This allows you to move a Pointer icon on the projected image, and helps
you draw attention to the area you are talking about.
Freezing the Image (Freeze)
When Freeze is activated on moving images, the frozen image continues to
project on the screen, so you can project a moving image one frame at a
time like a still photo. Also, you can perform operations such as changing
nl
ow
D
oa
62
d
de
Projection Functions
m
fro
w
w
.v
w
Move the Pointer icon (
Remote control
).
e
.b
rre
bo
en
d
an
b
a
Display the Pointer.
Each time you press the [Pointer] button, the pointer appears or
disappears.
Remote control
When any pair of adjacent [
], [
], [
], or [
]
buttons are pressed at the same time, the pointer can be moved
diagonally.
a
You can use Pointer Shape to set the shape of the pointer
icon.
s Settings - Pointer Shape p.82
nl
ow
D
oa
63
d
de
Projection Functions
m
fro
w
w
When any pair of adjacent [
).
e
Remote control
Start E-Zoom.
Press the [z] button to display the Cross (
enlarge.
.b
a
) to the area of the image that you want to
rre
bo
en
This is useful when you want to expand images to see them in greater
detail, such as graphs and tables.
Move the Cross (
d
an
b
.v
w
Enlarging Part of the Image (E-Zoom)
], [
], [
], or [
]
buttons are pressed at the same time, the pointer can be moved
diagonally.
Remote control
c
Enlarge.
Remote control
[z] button: Expands the area each time
it is pressed. You can expand quickly by
holding the button down.
[x] button: Reduces images that have
been enlarged.
[Esc] button: Cancels E-Zoom.
nl
ow
D
oa
64
d
de
Projection Functions
m
fro
w
w
Connect the projector to the computer with a commercially
available USB cable.
rre
bo
en
d
an
s "Connecting a Computer" p.24
], [
],
] button to scroll the image.
• If E-Zoom is selected, Progressive and Noise Reduction are
cancelled.
e
.b
], or [
.v
• During enlarged projection, press the [
[
a
w
a
• The enlargement ratio appears on the screen. The selected
area can be enlarged to between 1 to 4 times in 25
incremental steps.
the source to one of the following.
b •Change
USB Display
• Computer
• HDMI
s "Switching to the Target Image by Remote Control" p.31
Moving the mouse pointer
Using the Remote Control to Operate the Mouse
Pointer (Wireless Mouse)
[
][
][
][
] buttons:
Moves the mouse pointer.
You can control the computer's mouse pointer from the projector's remote
control. This function is called Wireless Mouse.
The following operating systems are compatible with Wireless Mouse.
Windows
OS
*
Windows
Windows
Windows
Windows
Mouse clicks
Mac OS X
2000
XP
Vista
7
Mac
Mac
Mac
Mac
Mac
OS
OS
OS
OS
OS
X
X
X
X
X
[ ] button: Left click. Press quickly twice to
double-click.
[Esc] button: Right click.
10.3.x
10.4.x
10.5.x
10.6.x
10.7.x
It may not be possible to use the Wireless Mouse function under some
versions of the operating systems.
Drag and drop
While holding down the [
Once the connection has been made, the mouse pointer can be operated as
follows.
the [
Use the following procedure to enable the Wireless Mouse function.
button.
], [
], [
] button, press
], or [
Release the [ ] button to drop at the
desired location.
]
nl
ow
D
oa
65
d
de
Projection Functions
m
fro
w
w
.v
w
rre
bo
en
[[] button: Moves to the previous page.
[]] button: Moves to the next page.
d
an
Summary of correction procedure
Page Up/Down
e
.b
When multiple projectors are set up and you need to make corrections, use
the following procedure to correct one projector at a time.
a
• When any pair of adjacent [
], [
], [
], or [
]
buttons are pressed at the same time, the pointer can be moved
diagonally.
• If the mouse button settings are set to reverse on the computer, the
operation of the remote control buttons will also be reversed.
• The Wireless Mouse function does not work under the following
conditions.
- When the Configuration menu or a Help screen is displayed
- When operating functions other than the Wireless Mouse function
(such as adjusting the volume).
However, when using the E-Zoom or Pointer function, the page up
or down function is available.
Correcting the Color Difference when Projecting
from Multiple Projectors
When multiple projectors are lined up and projecting images, you can
correct the brightness and color tone of each projector's image with multiscreen color adjustment so that the colors of images from each projector
match closely.
a
In some cases the brightness and color tone may not match completely
even after correction.
1. Set the projector ID.
Set a unique projector ID for the target projector so that you can limit which
projector is being corrected.
2. Correct the color difference.
You can carry out color correction when projecting from multiple projectors.
You can adjust from black to white in five stages called levels 1 to 5, and in
each of these 5 levels you can adjust the following two points.
• Correcting brightness
You can correct the image brightness to make them all equal.
• Correcting color
You can correct the image color so that they match closely.
Setting an ID and using the remote control
By setting an ID for each projector, you can limit which projector is
operated from the remote control.
You can set an ID for the projector within a range of "1" to "9". The default
value is Off.
On the remote control, select the Projector ID from 0 to 9 for the projector
you want to operate. The following examples show the combination of IDs
for the Projector ID and the ID selected with the remote control.
Opera‐
tion
Possible
Combinations
Projector ID: 1
Descriptions
When the Projector ID and
the ID selected with the
remote control match, you
can operate the projector
from the remote control.
nl
ow
D
oa
66
d
de
Projection Functions
m
fro
w
w
Press the [Menu] button while projecting.
s "Using the Configuration Menu" p.76
e
a
.b
ID selected with remote
control: 1
Setting the Projector ID
rre
bo
en
Descriptions
d
an
Combinations
.v
w
Opera‐
tion
Control panel
Possible
Projector ID: Off
Possible
Projector ID: 1
Not possi‐
ble
Projector ID: 1
When the Projector ID is set
to Off, you can operate the
projector regardless of the ID
selected with the remote
ID selected with remote control.
control: 1
When 0 is selected with the
remote control, you can
operate the projector from
the remote control regardless
ID selected with remote of the Projector ID.
control: 0
When the Projector ID and
the ID selected with the
remote control do not match,
you cannot operate the
ID selected with remote projector from the remote
control: 3
control.
b
Select Projector ID from Extended.
nl
ow
D
oa
67
d
de
Projection Functions
m
fro
w
w
Point the remote control at the remote receiver of the target
projector and press the [ID] button on the remote control.
rre
bo
en
a
d
an
] button.
.v
Choose the ID you want to set and press the [
w
c
e
.b
When you press the [ID] button, the current Projector ID is
displayed on the projection screen. It disappears in about three
seconds.
Remote control
d
Press the [Menu] button to finish making settings.
Perform steps 1 to 4 for all projectors and set a unique ID for each
one.
Selecting the ID for the projector you want to operate using the remote control
a
b
While holding the [ID] button, press the number button that
matches the ID of the projector you want to operate.
Select the ID each time you turn on the projector. When the projector
is turned on, the ID set for the remote control is 0.
Correcting
After setting up the projectors, correct the brightness and tone for each
projector to reduce the differences.
nl
ow
D
oa
68
d
de
Projection Functions
m
fro
w
w
w
.v
• When you select Level 5, adjust the brightness to match the
darkest image.
• When you select Level 1, adjust the brightness to match the
brightest image.
• When you select Level 2 to Level 4, adjust the brightness to the
mid-range brightness image.
• Each time the [ ] button is pressed, the image displayed changes
between the pattern display and the actual image, and you can
check the correction results and make corrections in the actual
image.
rre
bo
en
d
an
Correcting color differences
e
.b
Operate using the remote control with the ID set according to the projector
being used.
a
Press the [Menu] button.
b
Select Multi-screen from Extended.
s "Using the Configuration Menu" p.76
e
f
g
Adjusting Color Correct. (G/R) and Color Correct. (B/Y).
Repeat procedures 3 to 5 until corrections are finished.
When all corrections are finished, press the [Menu] button to finish
making settings.
After matching the ID for the remote control to the projector,
perform steps 1 to 7 for all projectors that need to be corrected.
c
d
Select the level to be corrected in Adjustment Level.
• Each time a level is selected, the pattern of the level selected is
displayed.
• You can start correcting from any level, usually you can make it
darker or lighter by correcting 1 to 5 or 5 to 1.
Correct the brightness with Brightness Correct.
nl
ow
D
oa
69
d
de
Projection Functions
m
fro
w
w
• When User's Logo Protect from Password Protect is set to
On, a message is displayed and the User's Logo cannot be
changed. You can make changes after setting User's Logo
Protect to Off.
s "Managing Users (Password Protect)" p.71
e
.b
rre
bo
en
d
an
You can save the image that is currently being projected as a User's Logo.
.v
w
a
Saving a User's Logo
a
a
Once a User's Logo has been saved, the logo cannot be returned to the
factory default.
Project the image you want to save as the User's Logo, and then
press the [Menu] button.
s "Using the Configuration Menu" p.76
Using the remote control
Using the control panel
• If User's Logo is selected when Keystone, E-Zoom, Aspect,
Progressive, or Zoom are being performed, the function
currently being performed is cancelled.
c
When the message "Choose this image as the User's Logo?" is
displayed, select Yes.
a
d
b
Select User's Logo from Extended.
When you press the [ ] button on the remote control or the
control panel, the screen size may change depending on the
signal to match the actual resolution of the image signal.
Move the box to select the part of the image to use as the User's
Logo.
You can perform the same operations from the projector's control
panel.
nl
ow
D
oa
70
d
de
Projection Functions
m
fro
w
w
w
f
Select the zoom factor from the zoom setting screen.
g
When the message "Save this image as the User's Logo?" is
displayed, select Yes.
e
.b
rre
bo
en
d
an
.v
Remote control
a
e
You can save at 400x300 dots in size.
When you press the [ ] button and the message "Select this
image?" is displayed, select Yes.
The image is saved. After the image has been saved, the message
"Completed." is displayed.
a
• When a User's Logo is saved, the previous User's Logo is
erased.
• Saving the User's Logo may take approximately 15 seconds.
Do not operate the projector or any connected equipment
while it is saving, otherwise malfunctions may occur.
nl
ow
D
oa
71
d
de
Security Functions
m
fro
w
w
w
e
.b
• Anti-Theft Lock
The projector is equipped with the following anti-theft security device.
s "Anti-Theft Lock" p.74
rre
bo
en
• Control Panel Lock
You can prevent people changing the settings on the projector without
permission.
s "Restricting Operation (Control Panel Lock)" p.73
d
an
• Password Protect
You can limit who can use the projector.
• User's Logo Protect
Even if someone tries to change the User's Logo set by the owner of the
projector, it cannot be changed. When User's Logo Protect is set to On,
the following setting changes for the User's Logo are prohibited.
.v
The projector has the following enhanced security functions.
• Capturing a User's Logo
• Setting Display Background, Startup Screen, or A/V Mute from
Display
s Extended - Display p.84
• Network Protect (EB-1776W/EB-1771W/EB-1761W only)
When Network Protect is set to On, changing the settings for Network is
prohibited.
s "Network Menu (EB-1776W/EB-1771W/EB-1761W Only)" p.86
Managing Users (Password Protect)
When Password Protect is activated, people who do not know the password
cannot use the projector to project images even if the projector power is on.
Furthermore, the user's logo that is displayed when you turn on the
projector cannot be changed. This acts as an anti-theft function as the
projector cannot be used even if it is stolen. At the time of purchase,
Password Protect is not activated.
Setting Password Protect
Use the following procedure to set Password Protect.
a
During projection, hold down the [Freeze] button for about five
seconds.
The Password Protect setting menu is displayed.
Remote control
Kinds of Password Protect
The following three kinds of Password Protect settings can be made
according to how the projector is being used.
• Power On Protect
When Power On Protect is On, you need to enter a preset password after
the projector is plugged in and turned on (this also applies to Direct
Power On). If the correct password is not entered, projection does not
start.
nl
ow
D
oa
72
d
de
Security Functions
m
fro
w
w
While holding down the [Num] button, enter a four digit number using
the numeric buttons. The number entered is displayed as "* * * *". When
you enter the fourth digit, the confirmation screen is displayed.
rre
bo
en
d
an
(3)
.v
w
a
Remote control
e
.b
• If Password Protect is already activated, you must enter the
password.
If the password is entered correctly, the Password Protect
setting menu is displayed.
s "Entering the Password" p.72
• When the password is set, stick the supplied password protect
sticker in a visible position on the projector as a further theft
deterrent.
b
Select the type of Password Protect you want to set, and then
press the [ ] button.
(4)
Re-enter the password.
The message "Password accepted." is displayed.
If you enter the password incorrectly, a message is displayed prompting
you to re-enter the password.
Entering the Password
When the password entry screen is displayed, enter the password using
the [Num] buttons on the remote control.
c
Select On, and then press the [
d
Set the password.
] button.
Press the [Esc] button, the screen displayed in step 2 is displayed
again.
(1)
Select Password, and then press the [
(2)
When the message "Change the password?" is displayed, select Yes and
then press the [ ] button. The default password is set to "0000". Change
this to your own desired Password. If you select No, the screen displayed
in step 2 is displayed again.
] button.
While holding down the [Num] button, enter the password by pressing the
numeric buttons.
nl
ow
D
oa
73
d
de
Security Functions
m
fro
w
w
e
.b
rre
bo
en
• If an incorrect password is entered three times in succession, the message
"The projector's operation will be locked." is displayed for approximately five
minutes, and then the projector switches to standby mode. If this happens,
disconnect the power plug from the electrical outlet and then reinsert it and
turn the projector's power back on. The projector displays the password entry
screen again so that you can enter the correct password.
This is useful at events or shows when you want to deactivate all buttons
during projection or at schools when you want to limit button operation.
The projector can still be operated using the remote control.
d
an
Attention
.v
w
When you enter the correct password, Password Protect is temporarily
released.
a
Press the [Menu] button while projecting.
s "Using the Configuration Menu" p.76
Using the remote control
Using the control panel
• If you have forgotten the password, make a note of the "Request Code:
xxxxx" number that appears on the screen and contact the nearest address
provided in the Epson Projector Contact List.
s Epson Projector Contact List
• If you continue to repeat the above operation and input the wrong password
thirty times in succession, the following message is displayed and the
projector does not accept any more password entries. "The projector's
operation will be locked." "Contact Epson as described in your
documentation."
s Epson Projector Contact List
b
Select Control Panel Lock from Settings.
c
Select either Full Lock or Partial Lock according to your purpose.
Restricting Operation (Control Panel Lock)
Perform one of the following to lock the operation buttons on the control
panel.
• Full Lock
All of the buttons on the control panel are locked. You cannot perform
any operations from the control panel, including turning the power on or
off.
• Partial Lock
All of the buttons on the control panel, except for the [t] button, are
locked.
nl
ow
D
oa
74
d
de
Security Functions
m
fro
w
w
rre
bo
en
d
an
.v
w
Anti-Theft Lock
e
.b
As an anti-theft measure, the projector is equipped with a security slot
compatible with the Microsaver Security System manufactured by
Kensington.
See the following for more details on the Microsaver Security System.
s http://www.kensington.com/
d
Select Yes when the confirmation message is displayed.
The control panel buttons are locked according to the setting you
chose.
a
You can release the control panel lock by one of the following
two methods.
• Select Off from Control Panel Lock.
s Settings - Control Panel Lock p.82
• Press and hold down the [ ] button on the control panel
for about seven seconds, a message is displayed and the lock
is released.
nl
ow
D
d
de
oa
m
fro
w
w
e
.b
rre
bo
en
d
an
This chapter explains how to use the Configuration menu and its functions.
.v
w
Configuration Menu
nl
ow
D
oa
76
d
de
Using the Configuration Menu
m
fro
w
w
d
Change settings.
e
Press the [Menu] button to finish making settings.
e
.b
rre
bo
en
b
Select a submenu item.
d
an
a
c
.v
Although steps are explained using the remote control as an example, you
can perform the same operations from the control panel. Check the guide
under the menu for the available buttons and their operations.
w
This section explains how to use the Configuration menu.
Display the Configuration menu screen.
Select a top menu item.
nl
ow
D
oa
77
d
de
List of Functions
m
fro
w
w
.v
w
Submenu Name
rre
bo
en
Video Signal
Signal menu
s p.81
Color Mode
e
Image menu
s p.80
Submenu Name
.b
Settable items vary depending on the model being used and the image
signal and source being projected.
Top Menu Name
Items or Setting Values
Dynamic, Presentation, Theatre,
Photo, sRGB, Blackboard,
Whiteboard, Customized, and
DICOM SIM
Settings menu
s p.82
Items or Setting Values
d
an
Top Menu Name
Configuration Menu Table
Auto, NTSC, NTSC4.43, PAL,
M-PAL, N-PAL, PAL60, and
SECAM
Aspect
Normal, 4:3, 16:9, Full, Zoom,
and Native
Overscan
Auto, Off, 4%, and 8%
Image processing
Fast, Fine
Keystone
H/V-Keystone and Quick Corner
Split Screen
-
Control Panel Lock
Full Lock, Partial Lock, and Off
Pointer Shape
Pointer 1, 2, and 3
Power Consumption
Normal and ECO
Volume
0 to 20
Remote Receiver
Front/Rear, Front, Rear, and Off
User Button
Power Consumption, Info,
Progressive, Test Pattern, Multiscreen, and Resolution
Test Pattern
-
Display
Messages, Display Background,
Startup Screen, and A/V Mute
Brightness
-24 to 24
Contrast
-24 to 24
Color Saturation
-32 to 32
Tint
-32 to 32
Sharpness
-5 to 5
Abs. Color Temp.
5000K to 10000K
Color Adjustment
R: -16 to 16
G: -16 to 16
B: -16 to 16
Auto Iris
On and Off
Auto Setup
On and Off
Resolution
Auto, Wide, and Normal
Tracking
-
User's Logo
-
Sync.
-
Projection
Position
Up, Down, Left, and Right
Front, Front/Ceiling, Rear, and
Rear/Ceiling
Progressive
Off, Video, and Film/Auto
Operation
Noise Reduction
Off, NR1, and NR2
Direct Power On, Sleep Mode,
Sleep Mode Timer, Lens Cover
Timer, and High Altitude Mode
HDMI Video Range
Auto, Normal, and Expanded
Standby Mode
Input Signal
Auto, RGB, and Component
Communication On and
Communication Off
USB Type B
USB Display and Link 21L
Extended menu
s p.84
nl
ow
D
oa
78
d
de
List of Functions
m
fro
w
w
Multi-screen
Adjustment Level, Brightness
Correct., Color Correct. (G/R),
and Color Correct. (B/Y)
Wireless LAN menu
Quick and Advanced
Channel
1ch, 6ch, and 11ch
Wireless LAN system
802.11b/g and 802.11b/g/n
SSID Auto Setting
On and Off
SSID
-
IP Settings
DHCP, IP Address, Subnet Mask,
and Gateway Address
SSID Display
On and Off
IP Address Display
On and Off
Security
No, WEP, WPA-PSK, and WPA2PSK
15 or 35 languages*1
Lamp Hours
-
Source
-
Input Signal
-
Resolution
-
Video Signal
-
Refresh Rate
-
Sync Info
-
WEP Encryption
128Bit and 64Bit
Status
-
Format
ASCII and HEX
Serial Number
-
Key ID
1, 2, 3, 4
Event ID
-
Reset All
-
Reset Lamp Hours
-
Encryption Key 1, En‐ cryption Key 2, Encryp‐
tion Key 3, and Encryp‐
tion Key 4
Security menu
s p.90
Network menu (EB-1776W/EB-1771W/EB-1761W only)
Basic menu
s p.88
Connection Mode
Language
*1 The number of supported languages differs depending on the region where the
projector is used.
Top Menu Name
Setting Values
e
Off, or 1 to 9
Submenu Name
.b
Projector ID
Top Menu Name
s p.89
rre
bo
en
Reset menu
s p.94
Items or Setting Values
d
an
Info menu
s p.94
Submenu Name
.v
w
Top Menu Name
Submenu Name
Mail menu
s p.91
Setting Values
Projector Name
-
PJLink Password
-
Web Control Password
-
Projector Keyword
On and Off
Wireless LAN Power
On and Off
Authentication Type
Open and Shared
Passphrase
-
Mail Notification
On and Off
SMTP Server
-
Port Number
-
Address 1 Setting, Ad‐ dress 2 Setting, and Ad‐
dress 3 Setting
Others menu
s p.92
SNMP
On and Off
Trap IP Address 1 and
Trap IP Address 2
-
nl
ow
D
oa
79
d
de
List of Functions
m
fro
w
w
Setting Values
Message Broadcasting
On and Off
e
On and Off
.b
Bonjour
rre
bo
en
AMX Device Discovery On and Off
d
an
Submenu Name
.v
w
Top Menu Name
nl
ow
D
oa
80
d
de
List of Functions
m
fro
w
w
You can adjust the image sharpness.
Abs. Color Temp.
(This item cannot be selected if Color Mode is set to sRGB g.)
You can adjust the overall tint of the image. You can adjust tints
in 10 stages from 5000 K to 10000 K. The image is tinted blue
when a high value is selected and tinted red when a low value is
selected.
Color Adjust‐
ment
(This item cannot be selected if Color Mode is set to sRGB g.)
• When Color Mode is set to anything other than Customized:
You can adjust the color strength for Red, Green, and
Blue individually.
• When Color Mode is set to Customized:
You can adjust the Hue, Saturation, and Brightness for R
(red), G (green), B (blue), C (cyan), M (magenta), and Y
(yellow) individually.
Auto Iris
(This item can be set only if Color Mode is set to Dynamic,
Theatre, or Customized.)
Set to On to adjust the iris to obtain the optimum light for images
being projected.
The setting is stored for each Color Mode.
s "Setting Auto Iris" p.44
Reset
You can reset all adjustment values for the Image menu to their
default settings. See the following to return all menu items to
their default settings.
s "Reset Menu" p.94
e
Color Mode
You can select the quality of the image to suit your surroundings.
s "Selecting the Projection Quality (Selecting Color Mode)"
p.43
Brightness
You can adjust the image brightness.
Contrast
You can adjust the difference between light and dark in the
images.
Color Saturation
You can adjust the color saturation for the images.
Tint
(Adjustment is only possible when NTSC signals are being input
if you use composite video signals.)
You can adjust the image tint.
.b
Function
rre
bo
en
Sharpness
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.30
Submenu
Function
d
an
Settable items vary depending on the image signal and source currently
being projected. Setting details are saved for each image signal.
.v
w
Submenu
Image Menu
nl
ow
D
oa
81
d
de
List of Functions
m
fro
w
w
.v
w
Function
rre
bo
en
d
an
Submenu
Signal Menu
You can adjust computer images when flickering, fuzziness, or
interference appear in the images.
Position
You cannot make settings on the Signal menu when the source is USB
Display, USB, or LAN.
You can adjust the display position up, down, left, and right when
a part of the image is missing so that the whole image is projected.
Progressive
(This setting can only be adjusted when a component video or
RGB video with an interlaced signal (480i/576i/1080i) is input.
This cannot be set when a digital RGB signal is input.)
Interlaceg (i) signal is converted to Progressiveg (p). (IP
conversion)
Off: Ideal for images with a large amount of movement.
Video: Ideal for general video images.
Film/Auto: This is ideal for movie films, computer graphics, and
animation.
Noise Reduction
(This cannot be set when a digital RGB signal is input, when
projecting an interlaced signal while Progressive is set to Off, or
when a 480p, 576p, or 1080p signal is input while Image
Processing is set to Fast.)
Smoothes out rough images. There are two modes. Select your
favorite setting. It is recommended that this is set to Off when
viewing image sources in which noise is very low, such as for
DVDs.
HDMI Video
Range
When the projector's HDMI port is connected to a DVD player,
set the projector's video range according to the DVD player's
video range setting.
Input Signal
You can select input signal from Computer port.
If set to Auto, the input signal is set automatically according to
the connected equipment.
If colors do not appear correctly when set to Auto, select the
appropriate signal according to the connected equipment.
Video Signal
You can select the input signal from the Video port. If set to Auto,
video signals are recognized automatically. If interference
appears in the image or a problem occurs such as no image is
being projected when set to Auto, select the appropriate signal
according to the connected equipment.
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.30
Submenu
Function
Auto Setup
Set to On to automatically adjust the image to the optimum state
when the input signal changes.
Resolution
Set to Auto to automatically identify the resolution of the input
signal. If images are not projected correctly when set to Auto, for
example if some of the image is missing, adjust to Wide for wide
screens, or set to Normal for 4:3 or 5:4 screens depending on the
connected computer.
Tracking
You can adjust computer images when vertical stripes appear in
the images.
e
.b
Sync.
Settable items vary depending on the image signal and source currently
being projected. Setting details are saved for each image signal.
nl
ow
D
oa
82
d
de
List of Functions
m
fro
w
w
(This cannot be set when a digital RGB signal is input.)
Changes the output image ratio (the range of the projected
image). You can set the cropping range to Off, 4%, or 8%. When
the source is HDMI, Auto is available. When Auto is selected, it
automatically changes to Off or 8% according to the input signal.
Image Process‐
ing
Changes settings for image processing.
Fast: Images are displayed quicker. The pen's tracking delay is
improved when using the optional interactive unit.
Fine: Images are displayed in higher quality.
Reset
You can reset all adjustment values on the Signal menu to their
default settings, except for Input Signal.
See the following to return all menu items to their default
settings.
s "Reset Menu" p.94
e
Overscan
Settings Menu
.b
You can set the aspect ratiog for projected images.
s "Changing the Aspect Ratio of the Projected Image" p.45
rre
bo
en
Aspect
d
an
Function
.v
w
Submenu
Submenu
Keystone
Function
You can correct keystone distortion.
• When H/V-Keystone is selected:
• Correcting manually
Adjust V-Keystone and H-Keystone to correct
horizontal and vertical keystone distortion.
• Correcting automatically
Set Auto H/V-Keystone* to On.
s "Correcting automatically - Auto H/V-Keystone (EB-1776W only)" p.37
* When using EB-1771W/EB-1761W/EB-1751 Auto VKeystone is set to On.
• When Quick Corner is selected:
Select and correct the four corners of the projected image.
s "Correcting manually - Quick Corner -" p.39
nl
ow
D
oa
83
d
de
List of Functions
m
fro
w
w
You can use this to restrict operation of the projector's control
panel.
s "Restricting Operation (Control Panel Lock)" p.73
Pointer Shape
You can select the shape of the pointer.
You can select and assign an item from the Configuration menu
with the remote control's [User] button. Pressing the [User]
button directly displays the assigned menu item selection/
adjustment screen, allowing you to make one-touch changes to
settings/adjustments. You can assign one of the following items
to the [User] button.
Power Consumption, Info, Progressive, Test Pattern, Multiscreen, and Resolution
Test Pattern
You can display a test pattern to adjust the projection without
connecting other equipment when you set up the projector.
While the test pattern is displayed, keystone correction, zoom,
and focus adjustments can be performed.
To cancel the test pattern, press the [Esc] button on the remote
control or the control panel.
e
Control Panel
Lock
User Button
.b
You can split the screen into two screens.
You can change the Screen Size, and select the Source, Swap
Screens, Audio Source, and Exit Split Screen.
s "Projecting Two Images Simultaneously (Split Screen)
(EB-1776W/EB-1771W/EB-1761W Only)" p.49
Pointer 1:
Pointer 2:
Pointer 3:
Attention
s "Using the Remote Control to Operate the Mouse Pointer
(Wireless Mouse)" p.64
Power Consump‐
tion
You can set the lamp brightness to one of two settings.
Select ECO if the images being projected are too bright, such as
when projecting images in a dark room or onto a small screen.
When ECO is selected, the power consumption is changed as
follows, and fan rotation noise during projection is reduced.
Electrical consumption: about 27% decrease
Volume
You can adjust the volume. Setting values are saved for each
source.
Remote Receiver
You can limit the reception of the operation signal from the
remote control.
When set to Off, you cannot perform any operations from the
remote control. If you want to make operations from the remote
control, hold down the [Menu] button on the remote control or
the control panel for at least 15 seconds to reset the setting to its
default value.
Function
rre
bo
en
Split Screen
(EB-1776W/
EB-1771W/
EB-1761W only)
Submenu
d
an
Function
.v
w
Submenu
If a test pattern is displayed for a long time, a
residual image may be visible in projected images.
Reset
You can reset all adjustment values on the Settings menu to their
default settings, except for User Button.
See the following to return all menu items to their default
settings.
s "Reset Menu" p.94
nl
ow
D
oa
84
d
de
List of Functions
m
fro
w
w
.v
w
Function
rre
bo
en
d
an
Submenu
Extended Menu
Select from one of the following projection methods
depending on how the projector is installed.
Front, Front/Ceiling, Rear, and Rear/Ceiling
You can change the setting as follows by pressing down
the [A/V Mute] button on the remote control for about five
seconds.
FrontWFront/Ceiling
RearWRear/Ceiling
s "Installation Methods" p.21
Operation
Direct Power On: Set to On to turn on the projector
simply by plugging it in.
When the power cord is plugged in, note that the projector
turns on automatically in cases such as a power outage
being restored.
Sleep Mode: When set to On, this automatically stops
projection when no image signal is being input and no
operations are carried out.
Sleep Mode Timer: When Sleep Mode is set to On, you
can set the time before the projector automatically turns off
within a range of 1 to 30 minutes.
Lens Cover Timer: When set to On, this turns off the
power automatically 30 minutes after the A/V mute slide is
closed.
The default value is On.
High Altitude Mode: Set to Mode1 or Mode2 when using
the projector above an altitude of 1500 m. If a high
temperature warning occurs when Mode1 is selected, select
Mode2. However, the brightness may decrease a little if
Power Consumption is set to Normal in Mode2.
e
.b
Projection
Submenu
Function
Display
You can make settings related to the projector's display.
Messages: When set to Off, the following items will not be
displayed.
Item names when the Source, Color Mode, or Aspect Ratio
is changed, messages when no signal is being input, and
warnings such as High Temp Warning.
Display Background*1: You can set the screen background
to Black, Blue, or Logo when no image signal is available.
Startup Screen*1: Set to On to display the User's Logo
when projection starts.
A/V Mute*1: You can set the screen displayed when the
remote control's [A/V Mute] button is pressed to Black,
Blue, or Logo.
User's Logo *1
You can change the user's logo that is displayed as a
background during Display Background, A/V Mute, and so
on.
s "Saving a User's Logo" p.69
nl
ow
D
oa
85
d
de
List of Functions
m
fro
w
w
Projector ID
Set the ID to a number between 1 and 9. Off indicates that
no ID is set.
s "Setting the Projector ID" p.66
Multi-screen
You can adjust the hue and brightness of each projected
image when multiple projectors are lined up and projecting.
Adjustment Level: You can adjust from black to white in
five stages called Level 1 to 5, and in each of these 5 levels,
you can adjust Brightness Correct. and Color Correct.
Brightness Correct.: You can correct the difference in the
brightness of each projector.
Color Correct. (G/R) / Color Correct. (B/Y): You can
correct the difference in the color of each projector.
s "Correcting the Color Difference when Projecting from
Multiple Projectors" p.65
Language
You can set the language for messages and menus.
e
Set to USB Display when the projector and a computer are
connected by a USB cable and computer images and audio
are projected.
s "Projecting with USB Display" p.31
When set to Link21L, ESC/VP21 commands are enabled.
s "ESC/VP21 Commands" p.126
You can reset the adjustment values for Display*1 and
Operation*2 from the Extended menu to their default
settings.
See the following to return all menu items to their default
settings.
s "Reset Menu" p.94
.b
USB Type B
Reset
Function
rre
bo
en
You can use network monitoring and control functions
while the projector is in standby mode when this is set to
Communication On. (EB-1776W/EB-1771W/EB-1761W
only)
You can monitor and control the status of the projector
over the network by using SNMPg, or by using the
EasyMP Monitor software.
s "Useful Software" p.120
Submenu
d
an
Standby Mode
Function
.v
w
Submenu
*1 When User's Logo Protect is set to On in Password Protect, settings related
to user's logo cannot be changed. You can make changes after setting User's
Logo Protect to Off.
s "Managing Users (Password Protect)" p.71
*2 Except for High Altitude Mode.
nl
ow
D
oa
86
d
de
List of Functions
m
fro
w
w
rre
bo
en
The following menus are available for setting Network
items.
Basic, Wireless LAN, Security, Mail, Others, Reset, and
Setup complete
e
.b
s "Setting Password Protect" p.71
Network Config‐
uration
Function
d
an
When Network Protect is set to On in Password Protect, a message is
displayed and the network settings cannot be changed. Set Network Protect
to Off and then configure the network.
Submenu
.v
w
Network Menu (EB-1776W/EB-1771W/EB-1761W
Only)
*
Displays available region information for the Wireless LAN unit being used.
For more details, contact your local dealer or the nearest address provided in
the Epson Projector Contact List.
s Epson Projector Contact List
a
• By using a Web browser of a computer connected to the projector
on a network, you can set functions and control the projector. This
function is called Web Control. You can easily enter text using a
keyboard to make settings for Web Control such as Security settings.
s "Changing Settings Using a Web Browser (Web Control)"
p.123
• Contact your network administrator for details on network settings.
Notes on operating the Network menu
Submenu
Function
Net. Info. - Wire‐
less LAN
Displays the following network setting status information.
• Connection Mode
• Antenna Level
• Projector Name
• SSID
• DHCP
• IP Address
• Subnet Mask
• Gateway Address
• MAC Address
• Region Code*
Selecting from the top menu and sub menus, and changing selected items is
the same as making operations from the Configuration menu.
When done, make sure you go to the Complete menu, and select Yes, No,
or Cancel. When you select Yes or No, you are returned to the
Configuration menu.
nl
ow
D
oa
87
d
de
List of Functions
m
fro
w
w
e
.b
rre
bo
en
d
an
.v
w
Yes: Saves the settings and exits the Network menu.
No: Does not save the settings and exits the Network menu.
Cancel: Continues displaying the Network menu.
Soft keyboard operations
The Network menu contains items that require input of alphanumerics
during setup. In this case, the following software keyboard is displayed. Use
the [
the [
], [
], [
], [
], [
], and [
], and [
] buttons on the remote control or
] buttons on the control panel to move the
cursor to the desired key, and then press the [ ] button to enter the
alphanumeric character. Enter figures by holding down the [Num] button
on the remote control, and pressing the numeric buttons. After inputting,
press Finish on the keyboard to confirm your input. Press Cancel on the
keyboard to cancel your input.
• Each time the CAPS key is selected and the [
sets and changes between upper case and lower
• Each time the SYM1/2 key is selected and the [
sets and changes the symbol keys for the section
] button is pressed, it
case letters.
] button is pressed, it
enclosed by the frame.
nl
ow
D
oa
88
d
de
List of Functions
m
fro
w
w
rre
bo
en
When set to On, you have to enter the keyword when you try to
connect the projector to a computer via a network. As a result,
you can prevent presentations from being interrupted by
connections from other computers.
Normally this should be set to On.
s EasyMP Network Projection Operation Guide
e
.b
Projector Key‐
word
Function
d
an
Submenu
.v
w
Basic menu
Submenu
Function
Projector Name
Displays the projector name used to identify the projector when
connected to a network.
When editing, you can enter up to 16 single-byte alphanumeric
characters.
PJLink Password
Set a password to use when you access the projector using
compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters.
Web Control
Password
Set a password to use when making settings and controlling the
projector using Web Control. Enter no more than eight singlebyte alphanumeric characters. Web Control is a computer
function that allows you to set up and control the projector by
using the Web browser on a computer connected on a Network.
s "Changing Settings Using a Web Browser (Web Control)"
p.123
nl
ow
D
oa
89
d
de
List of Functions
m
fro
w
w
Function
rre
bo
en
d
an
Submenu
.v
w
Wireless LAN menu
(This can only be set if Connection Mode is set to Quick.)
Select the frequency band used by the wireless LAN from 1ch,
6ch, or 11ch.
The default value is 11ch.
Wireless LAN
Sys.
Set the Wireless LAN system to either 802.11b/g or
802.11b/g/n.
The default value is 802.11b/g/n.
SSID Auto Set‐
ting
If Connection Mode is set to Quick, when you set this to On, you
can search for the projector more quickly from among multiple
projectors. SSID is set automatically.
When connecting to multiple projectors from 1 computer in
Quick mode, set this to Off, and set the same SSID in all the
projectors that will connect.
SSID
(This item can only be set when SSID Auto Setting is set to
Off.)
Enter an SSIDg. When an SSID is provided for the wireless LAN
system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters.
e
.b
Channel
Submenu
Function
Wireless LAN
Power
Turn On when connecting the projector to the computer over
wireless LAN.
If you do not want to connect via wireless LAN, turn it Off to
prevent unauthorized access by others.
The default value is On.
Connection
Mode
Set the connection mode to use when connecting the projector
and a computer via a wireless LAN.
If you select Quick, a small network is created automatically by
the projector and computer. It is used with EasyMP Network
Projection. If SSID Auto Setting is set to On, the projector
becomes an easy access point; if it is set to Off, the network is
created in Ad hoc modeg.
If you select Advanced, the connection is established in
infrastructure modeg through the access point installed.
nl
ow
D
oa
90
d
de
List of Functions
m
fro
w
w
IP Address Dis‐
play
To prevent the IP addressg from being displayed on the LAN
Standby screen, set this to Off.
e
To prevent the SSIDg from being displayed on the LAN Standby
screen, set this to Off.
Only available when the supplied or optional Wireless LAN unit is installed.
.b
SSID Display
rre
bo
en
(This item can only be set if Connection Mode is set to
Advanced.)
You can make network settings.
DHCP: Set to On to make network settings using DHCPg. If this
is set to On, you cannot set any more addresses.
IP Address: You can input the IP addressg assigned to the
projector. You can enter a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask: You can input the subnet maskg for the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address: You can input the IP address for the gateway
for the projector. You can enter a number from 0 to 255 in each
field of the address. However, the following gateway addressesg
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Security menu
d
an
IP Settings
Function
.v
w
Submenu
Submenu
Function
Security
Select the security type from the items that are displayed.
When setting up Security, follow the instructions from the
administrator of the network system you are about to access.
WEP Encryption
You can set the encryption for WEP encryption.
128Bit: Uses 128 (104) bit encoding.
64Bit: Uses 64 (40) bit encoding.
Format
You can set the input method for the WEP encryption key.
ASCII: Input text.
HEX: Input in HEX (hexadecimal).
Key ID
Selects the WEP encryption ID key.
nl
ow
D
oa
91
d
de
List of Functions
m
fro
w
w
Set the WEP authentication type.
Open: Uses open system authentication.
Shared: Uses shared key authentication.
Passphrase
Enter the passphrase. You can enter at least 8 and up to 63 singlebyte alphanumeric characters. When the passphrase is entered
and the [ ] button is pressed, the value is set and displayed as an
asterisk (*).
When using it with EasyMP Network Projection, you do not
need to input the passphrase in the computer if it is the initial
(default) passphrase.
It is recommended to change the passphrase periodically for the
purpose of security. If the network settings are initialized, it
returns to the initial passphrase.
s "Reset menu" p.93
You can enter up to 32 characters on the Configuration menu.
When entering more than 32 characters, use your Web browser
to enter the text.
s "Changing Settings Using a Web Browser (Web Control)"
p.123
In Quick mode, the initial passphrase is set.
Type of security
• WEP
Data is encrypted with a code key (WEP key). This mechanism prevents
communication unless the encrypted keys for the access point and the
projector match.
e
Authentication
Type
.b
You can enter the key used for WEP encryption. Enter the key in
single-byte characters following instructions from the network
administrator for the network in which the projector
participates. The type of character and the number that can be
entered differ according to the WEP Encryption and Format
settings.
128Bit - ASCII: Single-byte alphanumeric, 13 characters.
64Bit - ASCII: Single-byte alphanumeric, 5 characters.
128Bit - HEX: 0 to 9 and A to F, 26 characters
64Bit - HEX: 0 to 9 and A to F, 10 characters
rre
bo
en
Encryption Key
1/Encryption Key
2/Encryption Key
3/Encryption Key
4
When the supplied or optional wireless LAN unit is installed and being
used in Advanced connection mode, it is strongly recommended that you
set security. Select one of the following security methods.
d
an
Function
.v
w
Submenu
• WPA
This is an encryption standard that improves security which is a weak
point of WEP. Although there are multiple kinds of WPA encryption
methods, this projector uses TKIP and AES.
WPA also includes user authentication functions. WPA authentication
provides two methods: using an authentication server, or authenticating
between a computer and an access point without using a server. This
projector supports the latter method, without a server.
a
For setting details, follow the directions from the network
administrator of your network.
Mail menu
When this is set, you receive an email notification if a problem or warning
occurs in the projector.
nl
ow
D
oa
92
d
de
List of Functions
m
fro
w
w
rre
bo
en
You can input the email address of the destination to send the
notification email to. You can register up to three destinations.
You can enter up to 32 single-byte alphanumeric characters for
the email addresses.
You can select the problems or warnings to be notified about by
email. When the selected problem or warning occurs in the
projector, an email is sent to the specified destination address
notifying that a problem or warning has occurred. You can select
multiple items from the displayed items.
e
.b
Address 1 Set‐
ting/Address 2
Setting/Address
3 Setting
Function
d
an
Submenu
.v
w
s "Using the Mail Notification Function to Report Problems" p.125
Others menu
Submenu
Function
Mail Notification
Set to On to send an email to the preset addresses when a problem
or warning occurs with a projector.
SMTP Server
You can input the IP addressg for the SMTP server for the
projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from
0 to 255)
Port Number
You can input the port number for the SMTP server. The default
value is 25. You can input numbers between 1 to 65535.
Submenu
SNMP
Function
Set to On to monitor the projector using SNMP.
To monitor the projector, you need to install the SNMP manager
program on your computer. SNMP should be managed by a
network administrator.
The default value is Off.
nl
ow
D
oa
93
d
de
List of Functions
m
fro
w
w
When the projector is connected to a network, set this to On to
allow the projector to be detected by AMX Device Discoveryg.
Set this to Off if you are not connected to an environment
controlled by a controller from AMX or AMX Device
Discovery.
Bonjour
Set this to On when connecting to the network using Bonjour.
See Apple's Web site for more information on the Bonjour
service.
s http://www.apple.com/
Message Broad‐
casting
You can switch the EPSON Message Broadcasting function to
enable or disable.
e
AMX Device Dis‐
covery
Resets all of the network settings.
.b
You can register up to two IP addresses for the SNMP trap
notification destination. You can enter a number from 0 to 255 in
each field of the address. However, the following IP addresses
cannot be used. 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x
is a number from 0 to 255)
rre
bo
en
Trap IP Address
1/Trap IP Ad‐
dress 2
Reset menu
d
an
Function
.v
w
Submenu
Submenu
Reset network
settings.
Function
To reset all of the Network settings, select Yes.
nl
ow
D
oa
94
d
de
List of Functions
m
fro
w
w
.v
w
Function
rre
bo
en
d
an
Submenu
Info Menu (Display Only)
You can display the settings for Video Signal in the Signal
menu.
Refresh Rate
You can display the refresh rateg.
Sync Info
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.30
You can display the image signal information.
This information may be needed if service is required.
Status
This is information about errors that have occurred on the
projector.
This information may be needed if service is required.
Serial Number
Displays the projector's serial number.
Event ID
(EB-1776W/
EB-1771W/
EB-1761W only)
Displays the application error log.
s "About Event ID (EB-1776W/EB-1771W/EB-1761W
Only)" p.128
*
The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours
and above is displayed as "10H", "11H", and so on.
Reset Menu
Submenu
Function
Lamp Hours
You can display the cumulative lamp operating time*.
When the lamp replacement time is reached, the characters
are displayed in yellow.
Source
You can display the source name for the connected
equipment currently being projected.
Input Signal
You can display the content of Input Signal set in the
Signal menu according to the source.
Resolution
You can display the resolution.
e
.b
Video Signal
Lets you check the status of the image signals being projected and the status
of the projector. Items that can be displayed vary depending on the source
currently being projected. Depending on the model used, some input
sources are not supported.
nl
ow
D
oa
95
d
de
List of Functions
m
fro
w
w
Clears the cumulative lamp hours use time. Reset when you
replace the lamp.
* (EB-1776W/EB-1771W/EB-1761W only)
e
Reset Lamp
Hours
.b
You can reset all items in the Configuration menu to their
default settings.
The following items are not reset to their defaults: Input
Signal, User's Logo, all items for Network menus*, Lamp
Hours, Language, Password, User Button, and Multiscreen.
rre
bo
en
Reset All
d
an
Function
.v
w
Submenu
nl
ow
D
d
de
oa
m
fro
w
w
e
.b
rre
bo
en
d
an
This chapter explains how to identify problems and what to do if a problem is found.
.v
w
Troubleshooting
nl
ow
D
oa
97
d
de
Using the Help
m
fro
w
w
.v
Confirm the selection.
rre
bo
en
d
an
c
w
If a problem occurs with the projector, the Help screen is displayed to assist
you by pressing the Help button. You can solve problems by answering the
questions.
Using the remote control
Using the control panel
e
.b
a
Press the [Help] button.
The Help screen is displayed.
Using the remote control
Using the control panel
Questions and solutions are displayed as shown on the screen below.
Press the [Help] button to exit the Help.
b
Select a menu item.
a
Using the remote control
Using the control panel
See the following if the Help function does not provide a
solution to the problem.
s "Problem Solving" p.98
nl
ow
D
oa
98
d
de
Problem Solving
m
fro
w
w
.v
w
See the following if the indicators do not show clearly what the problem might be.
e
.b
s "When the Indicators Provide No Help" p.101
rre
bo
en
d
an
If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below.
Reading the Indicators
The projector is provided with the following three indicators that indicate the operating status of the projector.
A Power indicator
Indicates the operating status.
Standby condition
When the [t] button is pressed in this condition, projection starts.
Preparing for network monitoring or cool down in progress
All buttons are disabled while the indicator is flashing.
Warming up
Warm-up time is about 30 seconds. After warm-up is complete, the indicator stops flashing.
The [t] button is disabled during warm-up.
Projecting
B Lamp indicator
C Temp indicator
Indicates the projection lamp status.
Indicates the internal temperature status.
nl
ow
D
oa
99
d
de
Problem Solving
m
fro
w
w
.v
w
rre
bo
en
d
an
Refer to the following table to see what the indicators mean and how to remedy problems that they indicate.
If all indicators are off, check that the power cord is connected correctly and that the power is being supplied normally.
e
.b
Sometimes, when the power cord is unplugged, the t indicator remains lit for a short period, but this is not a fault.
: Lit
Status
Cause
: Flashing
: Off
: Varies according to the projector status
Remedy or Status
Internal Error
Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the
Epson Projector Contact List.
s Epson Projector Contact List
Fan Error
Sensor Error
Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the
Epson Projector Contact List.
s Epson Projector Contact List
High Temp Error
(overheating)
The lamp turns off automatically and projection stops. Wait for about five minutes. After about five minutes the projector switches to standby
mode, so check the following two points.
• Check that the air filter and air exhaust vent are clear, and that the projector is not positioned against a wall.
• If the air filter is clogged, clean or replace it.
s "Cleaning the Air Filter" p.112, "Replacing the Air Filter" p.117
If the error continues after checking the points above, stop using the projector, remove the power plug from the electrical outlet, and contact
your local dealer or the nearest address provided in the Epson Projector Contact List.
s Epson Projector Contact List
When using at an altitude of 1500 m or more, set High Altitude Mode to Mode1 or Mode2.
s "Extended Menu" p.84
Lamp Error
Lamp Failure
Check the following two points.
• Take out the lamp and check if it is cracked.
s "Replacing the Lamp" p.114
• Clean the air filter.
s "Cleaning the Air Filter" p.112
nl
ow
D
oa
100
d
de
Problem Solving
m
fro
w
w
Remedy or Status
rre
bo
en
d
an
Cause
.v
w
Status
e
.b
If the lamp is not cracked: Reinstall the lamp and turn on the power.
If the error continues: Replace the lamp with a new one and then turn on the power.
If the error continues: Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest
address provided in the Epson Projector Contact List.
s Epson Projector Contact List
If the lamp is cracked: Contact your local dealer or the nearest address provided in the Epson Projector Contact List. (Images cannot be
projected until the lamp is replaced.)
s Epson Projector Contact List
When using at an altitude of 1500 m or more, set High Altitude Mode to Mode1 or Mode2.
s "Extended Menu" p.84
Auto Iris Error
Power Err. (Ballast)
Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the
Epson Projector Contact List.
s Epson Projector Contact List
High Temp Warning
(This is not an abnormality. However, if the temperature rises too high again, projection stops automatically.)
• Check that the air filter and air exhaust vent are clear, and that the projector is not positioned against a wall.
• If the air filter is clogged, clean or replace it.
s "Cleaning the Air Filter" p.112, "Replacing the Air Filter" p.117
Replace Lamp
a
Replace it with a new lamp.
s "Replacing the Lamp" p.114
If you continue to use the lamp after the replacement period has passed, the possibility that the lamp may explode increases. Replace it with a
new lamp as soon as possible.
• See the following if the projector is not operating properly, even though the indicators are all showing normal.
s "When the Indicators Provide No Help" p.101
• If the indicators are in a state not shown in this table, stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or
the nearest address provided in the Epson Projector Contact List.
s Epson Projector Contact List
nl
ow
D
oa
101
d
de
Problem Solving
m
fro
w
w
.v
w
sp.102
• No images appear
Projection does not start, the projection area is completely black,
or the projection area is completely blue.
• Moving images are not displayed
Moving images being projected from a computer appear black
and nothing is projected.
sp.103
• Projection stops automatically
sp.103
• The message "Not supported" is displayed
sp.103
• The message "No Signal" is displayed
sp.103
• Interference or distortion appear in images
sp.105
sp.106
• The image is truncated (large) or small, the aspect ratio is not
suitable, or the image has been reversed
Only part of the image is displayed, the height and width ratios
of the image are not correct, or the image may appear reversed
from top to bottom or left to right.
sp.106
• Image colors are not right
The whole image appears purplish or greenish, images are black
& white, or colors appear dull.
• Images appear dark
sp.107
Problems when projection starts
• The projector does not turn on
sp.108
Other Problems
• No sound can be heard or the sound is faint
sp.108
• The remote control does not work
sp.109
e
Problems Relating to Images
• Email is not received even if a problem occurs in the projector
(EB-1776W/EB-1771W/EB-1761W only)
.b
If any of the following problems occur and the indicators do not offer a
solution, refer to the pages given for each problem.
rre
bo
en
d
an
• I want to change the language for messages and menus
When the Indicators Provide No Help
sp.109
sp.110
nl
ow
D
oa
102
d
de
Problem Solving
m
fro
w
w
d
an
.v
w
rre
bo
en
Problems Relating to Images
e
.b
No images appear
Check
Remedy
Did you press the [t] button?
Press the [t] button to turn the power on.
Are the indicators switched off?
The power cord is not connected correctly or power is not being supplied.
Connect the projector's power cord correctly.
s "From Installation to Projection" p.29
Check that your electrical outlet or power source is functioning correctly.
Is A/V Mute active?
Press the [A/V Mute] button on the remote control to cancel A/V Mute.
s "Hiding the Image and Sound Temporarily (A/V Mute)" p.60
Is the A/V mute slide closed?
Open the A/V mute slide.
s "Front/Top" p.11
Are the Configuration menu settings correct?
Reset all of the settings.
s Reset - Reset All p.94
When using USB Display, set USB Type B to USB Display.
s Extended - USB Type B p.84
Is the image to be projected completely black?
(Only when projecting computer images)
Some input images, such as screen savers, may be completely black.
Is the image signal format setting correct?
(Only when projecting images from a video source)
Change the setting according to the signal for the connected equipment.
s Signal - Video Signal p.81
Is the USB cable connected correctly?
(Only when projecting USB Display)
Check that the USB cable is connected correctly. Reconnect it if it is not connected or not connected properly.
When Windows Media Center is displayed at full screen, you cannot project using USB Display or network connection.
Is Windows Media Center displayed in full screen?
(Only when projecting using USB Display or network connection) Reduce the screen size.
Is an application using the Windows DirectX function displayed? Applications using the Windows DirectX function may not display images correctly.
(Only when projecting using USB Display or network connection)
When projecting in split screen mode, is one side or both sides blue? Check if a signal is being input, or if the input source combination is correct. Reconnect the cable if it is not connected or
not connected properly. If the input source combination is not correct, change to a supported combination.
(Only when projecting on a split screen)
s "Input sources for split screen projection" p.49
nl
ow
D
oa
103
d
de
Problem Solving
m
fro
w
w
.v
w
Remedy
.b
rre
bo
en
Check
d
an
Moving images are not displayed
Change the image signal from the computer to external output only. Check your computer's documentation, or contact
the computer's manufacturer.
Are the contents of the moving image you are trying to project
copyright protected?
The projector may not be able to project copyright protected moving images that are being played back on a computer.
For more details, see the user's guide supplied with the player.
e
Is the computer's image signal being output to the LCD and the
monitor?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)
Projection stops automatically
Check
Is Sleep Mode set to On?
Remedy
Press the [t] button to turn the power on. If you do not want to use Sleep Mode, change the setting to Off.
s Extended - Operation - Sleep Mode p.84
The message "Not supported" is displayed
Check
Is the image signal format setting correct?
(Only when projecting images from a video source)
Remedy
Change the setting according to the signal for the connected equipment.
s Signal - Video Signal p.81
Do the image signal resolution and the refresh rate correspond to the Refer to the computer's documentation for how to change the image signal resolution and the refresh rate output from
mode?
the computer.
(Only when projecting computer images)
s "Supported Monitor Displays" p.133
The message "No Signal" is displayed
Check
Are the cables connected correctly?
Remedy
Check that all the cables required for projection are securely connected.
s "From Installation to Projection" p.29
nl
ow
D
oa
104
d
de
Problem Solving
m
fro
w
w
rre
bo
en
d
an
Remedy
.v
w
Check
Change the image by pressing the [Source Search] button on the remote control or the control panel.
s "Automatically Detect Input Signals and Change the Projected Image (Source Search)" p.30
Is the power for the computer or video source turned on?
Turn the power on for the equipment.
Are the image signals being output to the projector?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)
If the image signals are only being output to the computer's LCD monitor or to the accessory monitor, you need to
change the output to an external destination as well as the computer's own monitor. For some computer models, when
the image signals are output externally, they no longer appear on the LCD monitor or accessory monitor.
If the connection is made while the power of the projector or computer is already turned on, the Fn key (Function key)
that changes the computer's image signal to external output may not work. Turn the power for the computer and the
projector off and then back on again.
s "From Installation to Projection" p.29
s Computer's documentation
e
.b
Is the correct port selected?
Images are fuzzy, out of focus, or distorted
Check
Remedy
Is the distance between the projector and the screen over 2.5 m? (For For the projected image to be automatically adjusted by Auto H/V-Keystone or Screen Fit, the projector should be
EB-1776W)
approximately 1.0 to 2.5 m away from the screen. If the projector must be placed further away than this, manually adjust
the projected image.
Is Auto H/V-Keystone set to Off? (EB-1776W only)
Setting it to On enables Auto H/V-Keystone.
s Settings - Keystone - Auto H/V-Keystone p.82
If you are using the projector with this setting off, manually adjust the projected image.
s "Correcting manually - manual H/V-Keystone -" p.38
Is the focus adjusted correctly?
Adjust the focus using the [Focus] buttons (EB-1776W only) or Focus ring (EB-1771W/EB-1761W/EB-1751 only).
s "Correcting the Focus" p.42
Is the projector at the correct distance?
Is it projecting outside of the recommended projection distance range?
Setup within the recommended range.
s "Screen Size and Projection Distance" p.130
Is the keystone adjustment value too large?
Lower the projection angle to reduce the amount of keystone correction.
s "Adjusting the Image Position" p.41
nl
ow
D
oa
105
d
de
Problem Solving
m
fro
w
w
rre
bo
en
d
an
Has condensation formed on the lens?
Remedy
.v
w
Check
e
.b
If the projector is suddenly taken from a cold environment to a warm environment, or if sudden ambient temperature
changes occur, condensation may form on the surface of the lens, and this may cause the images to appear fuzzy. Set the
projector up in the room about one hour before it is used. If condensation forms on the lens, turn the projector off and
wait for the condensation to disappear.
Interference or distortion appear in images
Check
Remedy
Is the image signal format setting correct?
(Only when projecting images from a video source)
Change the setting according to the signal for the connected equipment.
s Signal - Video Signal p.81
Are the cables connected correctly?
Check that all the cables required for projection are securely connected.
s "Connecting Equipment" p.24
Is an extension cable being used?
If an extension cable is used, electrical interference may affect the signals. Use the cables supplied with the projector to
check if the cables you are using may be causing the problem.
Is the correct resolution selected?
(Only when projecting computer images)
Set the computer so that the signals being output are compatible with the projector.
s "Supported Monitor Displays" p.133
s Computer's documentation
Are the Sync.g and Trackingg settings adjusted correctly?
(Only when projecting computer images)
Press the [Auto] button on the remote control or the [ ] button on the control panel to perform automatic adjustment.
If the images are not adjusted correctly even after performing automatic adjustment, you can also make adjustments
from the Configuration menu.
s Signal - Tracking, Sync. p.81
Is Transfer layered window selected?
(Only when projecting USB Display)
Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Vx.xx Settings, and then clear the
Transfer layered window checkbox.
The mouse cursor flickers (only when projecting USB Display)
Is Make the movement of the mouse pointer smooth. selected?
Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Vx.xx Settings, and then select the
Make the movement of the mouse pointer smooth. checkbox.
(This is not available for Windows 2000.) For Windows Vista/7, Windows Aero is disabled when this is selected.
nl
ow
D
oa
106
d
de
Problem Solving
m
fro
w
w
.v
w
Check
Remedy
.b
rre
bo
en
d
an
The image is truncated (large) or small, the aspect is not suitable, or the image has been reversed
Change the setting according to the signal for the connected equipment.
s Signal - Resolution p.81
Is the image still being enlarged by E-Zoom?
Press the [Esc] button on the remote control to cancel E-Zoom.
s "Enlarging Part of the Image (E-Zoom)" p.63
Is the image position adjusted correctly?
Press the [Auto] button on the remote control or the [ ] button on the control panel to perform automatic adjustment
of the computer image being projected. If the images are not adjusted correctly even after performing automatic
adjustment, you can also make adjustments from the Configuration menu.
Apart from computer image signals, you can adjust other signals while projecting from the Configuration menu.
s Signal - Position p.81
Is the computer set for dual display?
(Only when projecting computer images)
If dual display is activated in the Display Properties of the computer's Control Panel, only about half of the image on the
computer screen is projected. To display the entire image on the computer screen, turn off the dual display setting.
s Computer video driver documentation
Is the correct resolution selected?
(Only when projecting computer images)
Set the computer so that the signals being output are compatible with the projector.
s "Supported Monitor Displays" p.133
s Computer's documentation
Is the projection mode correct?
Depending on how the projector is installed, set the projection mode from one of the following: Front, Front/Ceiling,
Rear, or Rear/Ceiling.
s Extended - Projection p.84
s "Installation Methods" p.21
e
Is a wide panel computer image being projected?
(Only when projecting computer images)
Image colors are not right
Check
Do the input signal settings match the signals from the connected
device?
Remedy
Change the following settings according to the signal for the connected equipment.
• When the image is from a device connected to the Computer port
s Signal - Input Signal p.81
• When the image is from a device connected to the Video port
s Signal - Video Signal p.81
nl
ow
D
oa
107
d
de
Problem Solving
m
fro
w
w
rre
bo
en
d
an
Remedy
.v
w
Check
Adjust the Brightness setting from the Configuration menu.
s Image - Brightness p.80
Are the cables connected correctly?
Check that all the cables required for projection are securely connected.
Check that no cables are disconnected and that there are no poor contacts in the cables.
s "Connecting Equipment" p.24
Is the contrastg adjusted correctly?
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.80
Is the color adjustment set correctly?
Adjust the Color Adjustment setting from the Configuration menu.
s Image - Color Adjustment p.80
Are the color saturation and tint adjusted correctly?
(Only when projecting images from a video source)
Adjust the Color Saturation and Tint settings from the Configuration menu.
s Image - Color Saturation, Tint p.80
e
.b
Is the image brightness adjusted correctly?
Images appear dark
Check
Remedy
Is the image brightness set correctly?
Adjust the Brightness and Power Consumption settings from the Configuration menu.
s Image - Brightness p.80
s Settings - Power Consumption p.82
Is the contrastg adjusted correctly?
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.80
Is it time to replace the lamp?
When the lamp is nearly ready for replacement, the images become darker and the color quality becomes poorer. When
this happens, replace the lamp with a new lamp.
s "Replacing the Lamp" p.114
nl
ow
D
oa
108
d
de
Problem Solving
m
fro
w
w
d
an
.v
w
rre
bo
en
Problems when Projection Starts
e
.b
The projector does not turn on
Check
Remedy
Did you press the [t] button?
Press the [t] button to turn the power on.
Are the indicators switched off?
The power cord is not connected correctly or power is not being supplied.
Disconnect and then reconnect the power cord.
s "From Installation to Projection" p.29
Check that your electrical outlet or power source is functioning correctly.
Do the indicators turn on and off when the power cord is touched? There is probably a poor contact in the power cord, or the power cord may be defective. Reinsert the power cord. If this
does not solve the problem, stop using the projector, disconnect the power cord from the electrical outlet, and contact
your local dealer or the nearest address provided in the Epson Projector Contact List.
s Epson Projector Contact List
Is the Control Panel Lock set to Full Lock?
Press the [t] button on the remote control. If you do not want to use Control Panel Lock, change the setting to Off.
s Settings - Control Panel Lock p.82
Is the correct setting for the remote receiver selected?
Check the Remote Receiver from the Configuration menu.
s Settings - Remote Receiver p.82
Other Problems
No sound can be heard or the sound is faint
Check
Check that the audio/video cable is securely attached to both the
projector and audio source.
Remedy
Disconnect the cable from the Audio port, and then reconnect the cable.
Is the volume for the projector or the connected equipment set to the Adjust the volume so that sound can be heard.
minimum?
s Settings - Volume p.82
s "Adjusting the Volume" p.42
nl
ow
D
oa
109
d
de
Problem Solving
m
fro
w
w
rre
bo
en
d
an
Remedy
.v
w
Check
Press the [A/V Mute] button on the remote control to cancel A/V Mute.
s "Hiding the Image and Sound Temporarily (A/V Mute)" p.60
Is the audio cable's specification "No resistance"?
When using a commercially available audio cable, make sure it is labeled "No resistance".
Is it connected with an HDMI cable?
If no audio is output when connecting via an HDMI cable, set the connected equipment to PCM output.
Is Output audio from the projector selected?
(Only when projecting USB Display)
Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Vx.xx Settings, and then select
Output audio from the projector.
e
.b
Is A/V Mute active?
The remote control does not work
Check
Remedy
Is the remote control light-emitting area pointing towards the
remote receiver on the projector during operation?
Point the remote control towards the remote receiver.
s "Remote control operating range" p.19
Is the remote control too far from the projector?
The operating range for the remote control is about 6 m.
s "Remote control operating range" p.19
Is direct sunlight or strong light from fluorescent lamps shining onto Set the projector up in a location where strong light does not shine onto the remote receiver. Or set the remote receiver to
the remote receiver?
Off from Remote Receiver in the Configuration menu.
s Settings - Remote Receiver p.82
Is the correct setting for the Remote Receiver selected?
Check the Remote Receiver from the Configuration menu.
s Settings - Remote Receiver p.82
Are the batteries dead or have the batteries been inserted correctly? Make sure the batteries are inserted correctly or replace the batteries with new ones if necessary.
s "Replacing the remote control batteries" p.18
Has the Projector ID for the projector you want to operate been set? While holding the [ID] button, press the number button that matches the ID of the projector you want to operate.
(When using multi-screen adjustment)
s "Setting the Projector ID" p.66
I want to change the language for messages and menus
Check
Change the Language setting.
Remedy
Adjust the Language setting from the Configuration menu.
s Extended - Language p.84
nl
ow
D
oa
110
d
de
Problem Solving
m
fro
w
w
.v
w
Check
Remedy
.b
rre
bo
en
d
an
Email is not received even if a problem occurs in the projector (EB-1776W/EB-1771W/EB-1761W only)
To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from
the Configuration menu.
s Extended - Standby Mode p.84
Did a fatal abnormality occur and the projector come to a sudden
stop?
If the abnormal state continues, contact your local dealer or the nearest address provided in the Epson Projector Contact
List.
s Epson Projector Contact List
Is power being supplied to the projector?
Check that your electrical outlet or power source is functioning correctly.
Is Mail Notification function set correctly in the Configuration
menu?
An error notification email is sent according to the Mail settings in the Configuration menu. Check if it is set correctly.
s"Mail menu" p.91
e
Is Standby Mode set to Communication On?
Image file names are not displayed correctly in Slideshow
Check
Remedy
Is the file name too long?
The file name can be up to 8 characters long. For file names longer than this, the middle of the name is
omitted to shorten the name to 8 characters.
Are there any 2-byte characters in the file name?
Only alphanumeric characters and symbols can be used in file names. Any other characters are replaced with a
question mark (?).
Cannot change settings using a Web browser
Check
Are the user ID and password correct?
Remedy
Enter "EPSONWEB" as the user ID. This cannot be changed. Enter the user ID even if the password setting is
disabled. Enter the characters set for the Web Control Password as the password. The default password is
"admin".
nl
ow
D
d
de
oa
m
fro
w
w
.b
rre
bo
en
d
an
.v
w
Maintenance
e
This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come.
nl
ow
D
oa
112
d
de
Cleaning
m
fro
w
w
If the projector is particularly dirty, moisten the cloth with water containing
a small amount of neutral detergent, and then firmly wring the cloth dry
before using it to wipe the projector's surface.
Attention
Do not use volatile substances such as wax, alcohol, or thinner to clean the
projector's surface. The quality of the case may change or become discolored.
Cleaning the Lens
Use a commercially available cloth for cleaning glasses to gently wipe the
lens.
Warning
Do not use sprays that contain flammable gas to remove dust and lint from the
lens. The projector may catch fire due to the high internal temperature of the
lamp.
e
Clean the projector's surface by wiping it gently with a soft cloth.
Do not rub the lens with harsh materials or subject the lens to shocks, as it
can easily become damaged.
.b
Cleaning the Projector's Surface
rre
bo
en
Turn off the projector's power before cleaning. Otherwise, it could cause an
electric shock.
Attention
d
an
Caution
.v
w
You should clean the projector if it becomes dirty or if the quality of
projected images starts to deteriorate.
Cleaning the Air Filter
Clean the air filter and the air intake vent when the following message is
displayed.
"The projector is overheating. Make sure nothing is blocking the air vent,
and clean or replace the air filter."
Attention
• If dust collects on the air filter, it can cause the internal temperature of the
projector to rise, and this can lead to problems with operation and shorten
the optical engine's service life. Clean the air filter immediately when the
message is displayed.
• Do not rinse the air filter in water. Do not use detergents or solvents.
nl
ow
D
oa
113
d
de
Cleaning
m
fro
w
w
e
.b
rre
bo
en
• It is recommended that you clean these parts at least once every
three months. Clean them more often than this if using the projector
in a particularly dusty environment.
d
an
• If a message is frequently displayed, even after cleaning, it is time to
replace the air filter. Replace it with a new air filter.
s "Replacing the Air Filter" p.117
.v
w
a
nl
ow
D
oa
114
d
de
Replacing Consumables
m
fro
w
w
w
• The lamp indicator flashes orange.
.b
rre
bo
en
d
an
.v
This section explains how to replace the lamp and the air filter.
e
Replacing the Lamp
Lamp replacement period
It is time to replace the lamp when:
• The following message is displayed.
"It is time to replace your lamp. Please contact your Epson projector
reseller or visit www.epson.com to purchase."
• The projected image gets darker or starts to deteriorate.
Attention
The message is displayed for 30 seconds.
• The lamp replacement message is set to appear after the following time
periods in order to maintain the initial brightness and quality of the projected
images.
Lamp operating life: about 3900 hours
• If you continue to use the lamp after the replacement period has passed, the
possibility that the lamp may explode increases. When the lamp replacement
message appears, replace the lamp with a new one as soon as possible, even if
it is still working.
• Do not repeatedly turn off the power and immediately back on. Turning the
power on and off frequently may shorten the lamp's operating life.
• Depending on the characteristics of the lamp and the way it has been used,
the lamp may become darker or stop working before the lamp warning
message appears. You should always have a spare lamp unit ready in case it is
needed.
nl
ow
D
oa
115
d
de
Replacing Consumables
m
fro
w
w
.v
w
rre
bo
en
d
an
How to replace the lamp
e
.b
The lamp can be replaced even when the projector is suspended from a
ceiling.
Warning
• When replacing the lamp because it has stopped illuminating, there is a
possibility that the lamp may be broken. If replacing the lamp of a projector
which has been installed on the ceiling, you should always assume that the
lamp is cracked, and you should stand to the side of the lamp cover, not
underneath it. Remove the lamp cover gently. Be careful when removing the
lamp cover as shards of glass may fall out and could cause an injury. If any
shards of glass get into your eyes or mouth, contact your local physician
immediately.
• Never disassemble or remodel the lamp. If a modified or disassembled lamp
is installed in the projector and used, it could cause a fire, electric shock, or
an accident.
Then slide the lamp cover straight forward and lift it to remove.
Caution
Wait until the lamp has cooled down sufficiently before removing the lamp
cover. If the lamp is still hot, burns or other injuries may result. It takes about
one hour after the power has been turned off for the lamp to be cool enough.
a
After you turn off the projector's power and the confirmation
buzzer beeps twice, disconnect the power cord.
b
Wait until the lamp has sufficiently cooled down, and then remove
the lamp cover at the top of the projector.
Loosen the lamp cover fixing screw with the screwdriver supplied
with the new lamp unit or a cross-head screwdriver.
c
Raise the lamp fixing spring.
nl
ow
D
oa
116
d
de
Replacing Consumables
m
fro
w
w
s Epson Projector Contact List
e
Install the new lamp.
f
Lower the lamp fixing spring, and press down on the left and right
until it clicks into place.
Insert the new lamp along the guide rails in the correct direction so
that it fits, and push it firmly into place. Press down on the part
marked PUSH to fix the lamp in place.
e
.b
rre
bo
en
If the lamp is cracked, contact your local dealer or the nearest
address provided in the Epson Projector Contact List.
d
an
Raise the handle and take out the old lamp.
.v
w
d
nl
ow
D
oa
117
d
de
Replacing Consumables
m
fro
w
w
Replacing the Air Filter
e
.b
Air filter replacement period
rre
bo
en
Insert the hook as shown in the illustration below, and attach the
cover. Tighten the lamp cover fixing screw.
d
an
Replace the lamp cover.
.v
w
g
If the message is displayed frequently even though the air filter has been
cleaned, replace the air filter.
How to replace the air filter
The air filter can be replaced even when the projector is suspended from a
ceiling.
Attention
• Make sure you install the lamp securely. If the lamp cover is removed, the
power turns off automatically as a safety precaution. If the lamp or the lamp
cover is not installed correctly, the power does not turn on.
• This product includes a lamp component that contains mercury (Hg). Please
consult your local regulations regarding disposal or recycling. Do not dispose
of it with normal waste.
Resetting the lamp hours
The projector records how long the lamp is turned on and a message and
indicator notify you when it is time to replace the lamp. After replacing the
lamp, make sure you reset the Lamp Hours from the Configuration menu.
s "Reset Menu" p.94
a
Only reset the Lamp Hours after the lamp has been replaced.
Otherwise the lamp replacement period is not indicated correctly.
a
After you turn off the projector's power and the confirmation
buzzer beeps twice, disconnect the power cord.
b
Remove the air filter.
Grip the tab in the center of the air filter, and pull it straight out.
nl
ow
D
oa
118
d
de
Replacing Consumables
m
fro
w
w
e
.b
rre
bo
en
Push in the air filter until it clicks into place.
d
an
Install the new air filter.
.v
w
c
a
Dispose of used air filters properly in accordance with your local
regulations.
Material of the frame part: Polyphenylene ether and polystyrene resin
Material of the filter part: Polyurethane foam
nl
ow
D
d
de
oa
m
fro
w
w
e
.b
rre
bo
en
d
an
.v
w
Appendix
nl
ow
D
oa
120
d
de
Useful Software
m
fro
w
w
d
an
.v
w
By using the supplied EasyMP Network Projection, you can project your
computer screen from the projector via a network. Sharing the projector
over the network allows you to project data from different computers
without changing the signal cable. Even if the projector is away from the
computer, you can still project data via a network. You can also output the
computer's audio from the projector.
This projector only supports network projection using a wireless LAN
connection.
e
.b
rre
bo
en
EasyMP Network Projection
(EB-1776W/EB-1771W/EB-1761W only)
See the following for more details.
s EasyMP Slide Converter Operation Guide
s "Slideshow operating methods" p.53
EasyMP Monitor
(EB-1776W/EB-1771W/EB-1761W only)
By using EasyMP Monitor, you can check the status of multiple Epson
projectors on the network, and you can control them from your computer.
You can download EasyMP Monitor from the following Web site.
http://www.epson.com
See the following for more details.
s EasyMP Network Projection Operation Guide
EasyMP Slide Converter
By using the supplied EasyMP Slide Converter, you can convert PowerPoint
files to scenarios that can be played directly from the projector.
Save the converted scenario to a USB storage device. When the USB storage
device is connected to the projector, Slideshow starts.
nl
ow
D
oa
121
d
de
Optional Accessories and Consumables
m
fro
w
w
e
.b
ELPSC32
rre
bo
en
50" portable screen
Computer cable ELPKC09
(3 m - for mini D-Sub15-pin/mini D-Sub 15pin)
Computer cable ELPKC10
(20 m - for mini D-Sub15-pin/mini D-Sub 15pin)
d
an
Optional Accessories
.v
w
The following optional accessories and consumables are available. Please
purchase these products as and when needed. The following list of optional
accessories and consumables is current as of: February 2012. Details of
accessories are subject to change without notice and availability may vary
depending on the country of purchase.
Use one of these longer cables if the computer cable supplied with the projector
is too short.
Component video cable ELPKC19
(3 m - for mini D-Sub 15-pin/RCA male^3)
Use to connect a component videog source.
A compact screen that can be carried easily. (aspect ratio 4:3)
Interactive unit ELPIU01
60" portable screen ELPSC27
80" portable screen ELPSC28
100" screen ELPSC29
Use when operating the computer screen on the projection surface.
Portable roll-type screens. (aspect ratio 4:3)
Wireless LAN unit ELPAP07 (EB-1771W/EB-1761W only)
70" portable screen
80" portable screen
90" portable screen
Use when connecting the projector to a computer wirelessly and projecting.
ELPSC23
ELPSC24
ELPSC25
Portable roll-type screens. (aspect ratio 16:10)
53" portable screen
64" portable screen
ELPSC30
ELPSC31
Portable magnetic screens. (aspect ratio 4:3)
Multi-aspect screen
ELPSC26
A portable multi-aspect screen.
Computer cable ELPKC02
(1.8 m - for mini D-Sub15-pin/mini D-Sub 15pin)
This is the same as the computer cable supplied with the projector.
Document camera ELPDC06/ELPDC11
Use when projecting images such as books, OHP documents, or slides.
Quick Wireless Connection USB Key ELPAP09 (EB-1776W/
EB-1771W/EB-1761W only)
Use when you want to quickly establish one-to-one connection between the
projector and a computer with Windows installed.
Ceiling pipe (450 mm) * ELPFP13
Ceiling pipe (700 mm) * ELPFP14
Use when installing the projector on a high ceiling.
Ceiling mount* ELPMB23
Use when installing the projector on a ceiling.
Attachment plate* ELPPT01
Use when attaching the ceiling mount to the projector.
Special expertise is required to suspend the projector from a ceiling. Contact
your local dealer or the nearest address provided in the Epson Projector
Contact List.
s Epson Projector Contact List
*
nl
ow
D
oa
122
d
de
Optional Accessories and Consumables
m
fro
w
w
Use as a replacement for used air filters.
e
Air filter ELPAF31
.b
Use as a replacement for used lamps.
rre
bo
en
Lamp unit ELPLP65
d
an
.v
w
Consumables
nl
ow
D
oa
Monitoring and Controlling (EB-1776W/EB-1771W/EB-1761W Only)
d
de
123
m
fro
w
w
.v
w
The settings for items on each menu are the same as the projector's
Configuration menu.
s "Configuration Menu" p.75
By using the Web browser of a computer connected to the projector on a
network, you can make settings and control the projector. This function
allows you to perform setup and control operations remotely. In addition,
since you can use the computer's keyboard, entering characters required for
the setup is easier.
Use Microsoft Internet Explorer 6.0 or later as the Web browser. If using a
Mac OS X, use Safari.
a
If you set Standby Mode to Communication On, you can use the
Web browser to make settings and perform control even if the
projector is in standby mode (when the power is off).
s Extended - Standby Mode p.84
e
.b
rre
bo
en
d
an
Changing Settings Using a Web Browser (Web
Control)
Items that can only be set with a Web browser
• SNMP Community Name (up to 32 single-byte alphanumeric characters)
• Monitor Password (up to 16 single-byte alphanumeric characters)
Displaying the Web Control screen
Use the following procedure to display the Web Control screen.
Make sure the computer and projector are connected to the network. When
communicating with a wireless LAN, connect in Advanced mode.
a
Projector setup
In the Web browser, you can set items that are usually set in the projector's
Configuration menu. The settings are reflected in the Configuration menu.
There are also items that can only be set in the Web browser.
a
b
Items in the Configuration menu that cannot be set by the Web browser
•
•
•
•
•
•
•
•
Settings Menu - Pointer Shape
Settings Menu - Test Pattern
Settings Menu - User Button
Extended Menu - User's Logo
Extended Menu - Language
Extended Menu - Operation - High Altitude Mode
Extended Menu - Operation - Lens Cover Timer
Reset Menu - Reset All and Reset Lamp Hours
If your Web browser is set up to connect via a proxy server, the Web
Control screen cannot be displayed. To display Web Control, you need
to make settings so that a proxy server is not used for a connection.
Start the Web browser on the computer.
Enter the IP address of the projector in the address input box of
the Web browser, and press the Enter key on the computer's
keyboard.
The Web Control screen is displayed.
When Web Control Password is set from the Configuration menu,
the password entry screen is displayed.
c
Enter the user ID and password.
Enter "EPSONWEB" as the user ID.
The default password is "admin".
nl
ow
D
oa
124
d
de
Monitoring and Controlling (EB-1776W/EB-1771W/EB-1761W Only)
m
fro
w
w
.v
w
• Enter the user ID even if the password setting is disabled.
You cannot change the user ID.
rre
bo
en
d
an
a
e
.b
• You can change the password in Network menu from the
Configuration menu.
s Network - Basic - Web Control Password p.88
Displaying the Web Remote screen
The Web Remote function allows you to perform projector remote control
operations with a Web browser.
a
b
c
Display the Web Control screen.
Click Web Remote.
Name
Function
A [t] button
Turns the projector power on or off.
s "From Installation to Projection" p.29
B [Computer] button
Changes to images from the Computer port.
C [Video] button
Each time the button is pressed, the image displayed
changes between the Video input port and HDMI input
port.
D [Freeze] button
Images are paused or unpaused.
s "Freezing the Image (Freeze)" p.61
E [A/V Mute] button
Turns the video and audio on or off.
s "Hiding the Image and Sound Temporarily (A/V
Mute)" p.60
The Web Remote screen is displayed.
nl
ow
D
oa
125
d
de
Monitoring and Controlling (EB-1776W/EB-1771W/EB-1761W Only)
m
fro
w
w
Changes to the next input source that is sending an image.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.30
H [LAN] button
Changes to the image projected with EasyMP Network
Projection. When projecting using the supplied or
optional Quick Wireless Connection USB Key, this button
switches to that image. (EB-1776W/EB-1771W/
EB-1761W only)
s "Switching to the Target Image by Remote Control"
p.31
I [USB] button
Each time the button is pressed, it cycles through the
following images:
• USB Display
• Images from the device connected to the USB port
s "Switching to the Target Image by Remote Control"
p.31
J [Volume] buttons
[a][b]
[a] Decreases the volume.
[b] Increases the volume.
s "Adjusting the Volume" p.42
e
G [Source Search]
button
.b
When projecting images or scenarios using Slideshow,
pressing these buttons displays the previous/next screen.
Using the Mail Notification Function to Report
Problems
rre
bo
en
Changes pages in files such as PowerPoint files when using
the following projection methods.
• When using the Wireless Mouse function
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.64
• When using USB Display
s "Projecting with USB Display" p.31
• During a network connection (EB-1776W/EB-1771W/
EB-1761W only)
d
an
F [Page] buttons
[[][]]
Function
.v
w
Name
When you set Mail Notification, notification messages are sent to the preset
email addresses when a problem or warning occurs with a projector. This
will enable the operator to be notified of problems with projectors even at
locations away from the projectors.
s Network - Mail - Mail Notification p.91
a
• Up to a maximum of three notification destinations (addresses) can
be registered, and notification messages can be sent to all three
destinations at once.
• If a projector develops a critical problem and suddenly stops
working, it may not be able to send a message notifying an operator
of the problem.
• If you set Standby Mode to Communication On, you can control
the projector even if it is in standby mode (when the power is
off).
s Extended - Standby Mode p.84
Reading Error Notification Mail
When the Mail Notification function is set to On and a problem or warning
occurs in the projector, the following email will be sent.
Mail sender: Address for Address 1
Subject: EPSON Projector
Line 1: The projector name where the problem has occurred
Line 2: The IP address set for the projector where the problem has
occurred.
Line 3 and on: Details of the problem
nl
ow
D
oa
126
d
de
Monitoring and Controlling (EB-1776W/EB-1771W/EB-1761W Only)
m
fro
w
w
• SNMP should be managed by a network administrator or someone
who is familiar with the network.
• To use the SNMP function to monitor the projector, you need to
install the SNMP manager program on your computer.
• The managing function using SNMP cannot be used via wireless
LAN in Quick connection mode.
• Up to two destination IP addresses can be saved.
e
.b
rre
bo
en
d
an
• Internal error
a
.v
w
The details of the problem are listed line by line. The messages are listed
below.
• Fan related error
• Sensor error
• Lamp timer failure
• Lamp out
• Internal temperature error
• High-speed cooling in progress
• Lamp replacement notification
• No-signal
No Signal is input to the projector. Check the connection status or check
that the power for the signal source is turned on.
• Auto Iris Error
• Power Err. (Ballast)
See the following to deal with problems or warnings.
s "Reading the Indicators" p.98
ESC/VP21 Commands
You can monitor and control the projector from a computer via USB.
Connect the device and the projector with a USB cable, and then enter the
communication commands (ESC/VP21 commands).
Before starting
To control and monitor the projector using ESC/VP21 commands, the
following preparations must be carried out.
a
s Epson Projector Contact List
Management Using SNMP
By setting SNMP to On in the Configuration menu, notification messages
are sent to the specified computer when a problem or warning occurs. This
will enable the operator to be notified of problems with projectors even at
locations away from the projectors.
s Network - Others - SNMP p.92
Install the USB communication driver (EPSON USB-COM Driver) to
your computer. For information about the EPSON USB-COM Driver,
contact your local dealer or the nearest address provided in the
Epson Projector Contact List.
b
Set USB Type B to Link 21L from the projector's Configuration
menu.
s Extended - USB Type B p.84
c
Connect the computer's USB port to the projector's USB (TypeB)
port with a USB cable.
Start from step 2 from the second time.
nl
ow
D
oa
127
d
de
Monitoring and Controlling (EB-1776W/EB-1771W/EB-1761W Only)
m
fro
w
w
Item
Power ON/OFF
Signal selection
Command
On
PWR ON
Off
PWR OFF
Computer
Auto
SOURCE 1F
RGB
SOURCE 11
Component
SOURCE 14
HDMI
SOURCE 30
Video
SOURCE 41
USB Display
SOURCE 51
USB
SOURCE 52
LAN (EB-1776W/EB-1771W/EB-1761W SOURCE 53
only)
A/V Mute On/Off
A/V Mute selection
On
MUTE ON
Off
MUTE OFF
Black
MSEL 00
Blue
MSEL 01
Logo
MSEL 02
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
e
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
Default baud rate setting: 9600 bps
Data length: 8 bit
Parity: None
Stop-bit: 1 bit
Flow control: None
.b
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
•
•
•
•
•
rre
bo
en
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
d
an
Communications protocol
.v
w
Command list
nl
ow
D
oa
128
d
de
About Event ID (EB-1776W/EB-1771W/EB-1761W Only)
m
fro
w
w
.v
w
rre
bo
en
d
an
Check the numbers and then apply the following countermeasures. If you cannot resolve the problem, contact your network administrator, or contact your local
dealer or the nearest address provided in the Epson Projector Contact List.
e
.b
s Epson Projector Contact List
Event ID
Cause
Remedy
0432
0435
Failed to startup EasyMP Network Projection.
Restart the projector.
0434
0481
0482
0485
Network communication is unstable.
Check the network communication status, and reconnect after waiting for a
while.
0433
Cannot play transferred images.
Restart EasyMP Network Projection.
0484
Communication was disconnected from the computer.
0483
04FE
EasyMP Network Projection ended unexpectedly.
Check the network communication status, and then restart the projector.
0479
04FF
A system error occurred in the projector.
Restart the projector.
0891
Cannot find an access point with the same SSID.
Set the computer, the access point, and the projector to the same SSID.
0892
The WPA/WPA2 authentication type does not match.
0893
The WEP/TKIP/AES encryption type does not match.
Check that the wireless LAN security settings are correct.
s Security p.90
0894
Communication was disconnected because the projector connected to an
unauthorized access point.
Contact your network administrator for more information.
0898
Failed to acquire DHCP.
Check that the DHCP server is operating correctly. If you are not using DHCP,
turn off the DHCP setting.
s Wireless LAN - IP Settings p.89
0899
Other communication errors
If restarting the projector or EasyMP Network Projection does not solve the
problem, contact your local dealer or the nearest address provided in the Epson
Projector Contact List.
s Epson Projector Contact List
nl
ow
D
oa
129
d
de
About PJLink (EB-1776W/EB-1771W/EB-1761W Only)
m
fro
w
w
w
Function
Mute settings
PJLink Command
Image muting set
AVMT 11
Audio muting set
AVMT 21
• Input names defined by PJLink and corresponding projector sources
Source
PJLink Command
Computer
INPT 11
Video
INPT 21
HDMI
INPT 32
USB
INPT 41
LAN
INPT 52
USB Display
INPT 53
• Manufacturer name displayed for "Manufacture name information query"
EPSON
e
• Non-compatible commands
.b
URL:http://pjlink.jbmia.or.jp/english/
EB-1776W/EB-C301MS/PowerLite 1776W
EB-1771W/EB-C301MN/EB-C3011WN/PowerLite 1771W
EB-1761W/EB-C261MN/EB-C3005WN/PowerLite 1761W
rre
bo
en
It complies with all commands except for the following commands defined
by PJLink Class1, and agreement was confirmed by the PJLink standard
adaptability verification.
d
an
The projector complies with the PJLink Class1 standard established by the
JBMIA.
• Model name displayed for "Product name information query"
.v
PJLink Class1 was established by the JBMIA (Japan Business Machine and
Information System Industries Association) as a standard protocol for
controlling network-compatible projector's as part of their efforts to
standardize projector control protocols.
nl
ow
D
oa
130
d
de
Screen Size and Projection Distance
m
fro
w
w
.v
w
A
4:3 Screen Size
rre
bo
en
d
an
Projection Distance (For EB-1776W/EB-1771W/
EB-1761W)
B
40"
81x61
50"
e
.b
Minimum (Wide) to Maximum
(Tele)
102 - 122
-6
100x76
127 - 153
-7
60"
120x91
153 - 184
-8
80"
160x120
205 - 246
-11
100"
200x150
256 - 308
-14
150"
300x230
385 - 462
-21
200"
410x300
514 - 617
-28
250"
500x380
643 - 771
-35
260"
520x400
668 - 802
-36
Unit: cm
A
16:9 Screen Size
A Projection distance
B Distance from the center of the lens to the base of the screen
(or to the top of the screen, if suspended from a ceiling)
C Center of lens
Unit: cm
A
4:3 Screen Size
Minimum (Wide) to Maximum
(Tele)
B
28"
57x43
71 - 85
-4
30"
61x46
76 - 91
-4
Minimum (Wide) to Maximum
(Tele)
B
30"
66x37
69 - 83
-2
40"
89x50
92 - 111
-2
50"
110x62
115 - 139
-3
60"
130x75
139 - 167
-3
70"
160x87
162 - 195
-4
80"
180x100
186 - 223
-5
100"
220x120
232 - 279
-6
150"
330x190
349 - 419
-8
200"
440x250
466 - 560
-11
250"
550x310
583 - 700
-14
280"
620x350
653 - 784
-16
nl
ow
D
oa
131
d
de
Screen Size and Projection Distance
m
fro
w
w
e
B
.b
Minimum (Wide) to Maximum
(Tele)
Projection Distance (For EB-1751)
rre
bo
en
16:10 Screen Size
d
an
A
.v
w
Unit: cm
30"
64x40
67 - 80
-4
40"
86x54
89 - 108
-5
50"
110x67
112 - 135
-6
60"
130x81
135 - 162
-7
80"
170x110
181 - 217
-10
100"
220x130
226 - 271
-12
150"
320x200
340 - 408
-18
200"
430x270
454 - 545
-24
250"
540x340
567 - 681
-31
300"
640x400
681 - 818
-37
A Projection distance
B Distance from the center of the lens to the base of the screen
(or to the top of the screen, if suspended from a ceiling)
C Center of lens
Unit: cm
A
4:3 Screen Size
Minimum (Wide) to Maximum
(Tele)
B
30"
61x46
72 - 86
-5
40"
81x61
96 - 116
-7
50"
100x76
120 - 145
-9
nl
ow
D
oa
132
d
de
Screen Size and Projection Distance
m
fro
w
w
.v
w
B
16:10 Screen Size
A
Minimum (Wide) to Maximum
(Tele)
B
e
.b
Minimum (Wide) to Maximum
(Tele)
rre
bo
en
4:3 Screen Size
Unit: cm
d
an
A
60"
120x91
145 - 174
-10
80"
160x120
194 - 233
-14
29"
62x39
73 - 88
-1
100"
200x150
242 - 291
-17
30"
64x40
76 - 92
-1
150"
300x230
364 - 438
-26
40"
86x54
102 - 123
-2
200"
410x300
486 - 584
-34
50"
110x67
128 - 154
-2
250"
510x380
608 - 730
-43
60"
130x81
154 - 185
-3
300"
610x460
730 - 877
-51
80"
170x110
205 - 247
-4
100"
220x130
257 - 309
-5
150"
320x200
386 - 464
-7
200"
430x270
516 - 619
-9
250"
540x340
645 - 774
-12
280"
603x377
723 - 867
-13
Unit: cm
A
16:9 Screen Size
Minimum (Wide) to Maximum
(Tele)
B
30"
66x37
78 - 94
+1
40"
89x50
105 - 126
+1
50"
110x62
131 - 158
+1
60"
130x75
158 - 190
+1
70"
160x87
185 - 222
+1
80"
180x100
211 - 254
+2
100"
220x120
264 - 317
+2
150"
330x190
397 - 477
+3
200"
440x250
530 - 636
+4
250"
550x310
663 - 796
+5
275"
610x340
729 - 875
+6
nl
ow
D
oa
133
d
de
Supported Monitor Displays
m
fro
w
w
Resolution (dots)
VGA
60/72/75/85
640x480
SVGA
56/60/72/75/85
800x600
XGA
60/70/75/85
1024x768
WXGA
60
1280x768
60
1366x768
60/75/85
1280x800
WXGA+
60/75/85
1440x900
WXGA++
60
1600x900
SXGA
70/75/85
1152x864
60/75/85
1280x1024
60/75/85
1280x960
60/75
1400x1050
60
1680x1050
UXGA
60
1600x1200
MAC13"
67
640x480
MAC16"
75
832x624
MAC19"
75
1024x768
59
1024x768
2
1152x870
*1 (EB-1776W/EB-1771W/EB-1761W only)
*2 Only compatible when Wide is selected as the Resolution from the
Configuration menu.
e
Refresh Rate (Hz)
WSXGA+*1,
75
Resolution (dots)
.b
Signal
SXGA+
rre
bo
en
Computer signals (analog RGB)
Refresh Rate (Hz)
d
an
MAC21"
.v
w
Signal
Supported Resolutions
Even when signals other than those mentioned above are input, it is likely that the
image can be projected. However, not all functions may be supported.
Component video
Signal
Refresh Rate (Hz)
Resolution (dots)
SDTV (480i)
60
720x480
SDTV (576i)
50
720x576
SDTV (480p)
60
720x480
SDTV (576p)
50
720x576
HDTV (720p)
50/60
1280x720
HDTV (1080i)
50/60
1920x1080
HDTV (1080p)
24/30/50/60
1920x1080
Signal
Refresh Rate (Hz)
Resolution (dots)
TV (NTSC)
60
720x480
TV (SECAM)
50
720x576
TV (PAL)
50/60
720x576
Composite video
nl
ow
D
oa
134
d
de
Supported Monitor Displays
m
fro
w
w
.v
w
Resolution (dots)
VGA
60
640x480
SVGA
60
800x600
XGA
60
1024x768
WXGA
60
1280x800
WXGA++
60
1600x900
60
1280x960
60
1280x1024
SXGA+
60
1400x1050
UXGA
60
1600x1200
SDTV (480i/480p)
60
720x480
SDTV (576i/576p)
50
720x576
HDTV (720p)
50/60
1280x720
HDTV (1080i)
50/60
1920x1080
HDTV (1080p)
24/30/50/60
1920x1080
SXGA
e
Refresh Rate (Hz)
.b
Signal
rre
bo
en
d
an
Input signal from the HDMI port
nl
ow
D
oa
135
d
de
Specifications
m
fro
w
w
d
an
.v
w
EB-1771W
EB-1761W
EB-1751
e
.b
EB-1776W
Product name
rre
bo
en
Projector General Specifications
292 (W) x 44 (H) x 210 (D) mm (not including raised section)
Dimensions
0.59" Wide
LCD panel size
0.55"
Polysilicon TFT active matrix
Display method
1,024,000 pixels
WXGA (1280 (W)x 800 (H) dots)x 3
Resolution
Focus adjustment
Electric/Auto
Manual
Manual (1 to 1.2)
Zoom adjustment
UHE lamp, 230 W Model No.: ELPLP65
Lamp
UHE lamp, 205 W Model No.:
ELPLP65
UHE lamp, 230 W Model No.:
ELPLP65
1 W monaural
Max. audio output
1
Speaker
100 to 240 V AC ±10%, 50/60 Hz 3.3 to 1.5 A
Power supply
Power con‐
sumption
786,432 pixels
XGA (1024 (W) x 768 (H)
dots)x 3
100 to 240 V AC ±10%, 50/60
Hz 3.0 to 1.4 A
100 to 240 V AC ±10%, 50/60
Hz 3.3 to 1.5 A
100 to 120 V area
Operating: 322 W
Standby power consumption (Communication On): 7.4 W
Standby power consumption (Communication Off): 0.38 W
Operating: 293 W
Standby power consumption
(Communication On): 7.4 W
Standby power consumption
(Communication Off): 0.38 W
Operating: 322 W
Standby power consumption
(Communication On): 7.4 W
Standby power consumption
(Communication Off): 0.38 W
220 to 240 V area
Operating: 304 W
Standby power consumption (Communication On): 7.7 W
Standby power consumption (Communication Off): 0.44 W
Operating: 278 W
Standby power consumption
(Communication On): 7.7 W
Standby power consumption
(Communication Off): 0.44 W
Operating: 304 W
Standby power consumption
(Communication On): 7.7 W
Standby power consumption
(Communication Off): 0.44 W
Operating altitude
Operating temperature
Storage temperature
Altitude 0 to 2,286 m
5 to +35°C (No condensation)
-10 to +60°C (No condensation)
nl
ow
D
oa
136
d
de
Specifications
m
fro
w
w
EB-1761W
EB-1751
e
.b
EB-1771W
rre
bo
en
d
an
EB-1776W
Product name
Connectors
.v
w
Approx. 1.7 kg
Mass
Computer port
1
Mini D-Sub15-pin (female)
Video port
1
RCA pin jack
Audio port
1
Stereo mini jack (3.5Ф)
HDMI port
1
HDMI (Audio is only supported by PCM)
USB (TypeA) port *
1
USB connector (Type A)
USB (TypeB) port*
1
USB connector (Type B)
USB port
(dedicated Wireless LAN unit)
1
USB connector (Type A)
* Supports USB 2.0. However, USB ports are not guaranteed to operate all devices that support USB.
-
nl
ow
D
oa
137
d
de
Specifications
m
fro
w
w
rre
bo
en
d
an
.v
w
This product is also designed for IT power distribution system with phase-to-phase voltage 230V.
Angle of tilt
e
.b
30°
30°
If you use the projector tilted at an angle of more than 30˚ it could be damaged and cause an accident.
nl
ow
D
oa
138
d
de
Specifications
m
fro
w
w
EPSON
Type of Product:
LCD Projector
Model:
H476C/H477C/H478C/H479C
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio
and television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
e
Trade Name:
.b
Declare under sole responsibility that the product identified herein,
complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital
device. Each product marketed, is identical to the representative unit tested
and found to be compliant with the standards. Records maintained continue
to reflect the equipment being produced can be expected to be within the
variation accepted, due to quantity production and testing on a statistical
basis as required by 47CFR 2.909. Operation is subject to the following two
conditions : (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that
may cause undesired operation.
rre
bo
en
Tel:
Epson America, Inc.
3840 Kilroy Airport Way
MS: 3-13
Long Beach, CA 90806
562-290-5254
FCC Compliance Statement
For United States Users
d
an
We:
Located at:
.v
w
DECLARATION of CONFORMITY
According to 47CFR, Part 2 and 15
Class B Personal Computers and Peripherals; and/or
CPU Boards and Power Supplies used with Class B Personal Computers
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING
The connection of a non-shielded equipment interface cable to this
equipment will invalidate the FCC Certification or Declaration of this
device and may cause interference levels which exceed the limits established
by the FCC for this equipment. It is the responsibility of the user to obtain
and use a shielded equipment interface cable with this device. If this
equipment has more than one interface connector, do not leave cables
connected to unused interfaces. Changes or modifications not expressly
approved by the manufacturer could void the user's authority to operate the
equipment.
nl
ow
D
oa
139
d
de
Appearance
m
fro
w
w
e
.b
rre
bo
en
d
an
.v
w
A
B
Center of lens
Distance from center of lens to suspension bracket fixing point
Units: mm
nl
ow
D
oa
140
d
de
Glossary
m
fro
w
w
.v
w
rre
bo
en
d
an
This section briefly explains the difficult terms that are not explained in the text of this guide. For details, refer to other commercially available publications.
A method of wireless LAN connection that communicates with wireless LAN clients without using an access point.
AMX Device Discovery
AMX Device Discovery is a technology developed by AMX to facilitate AMX control systems for easy operation of the target equipment.
Epson have implemented this protocol technology, and have provided a setting to enable the protocol function (ON).
See the AMX Web site for more details.
URL http://www.amx.com/
Aspect Ratio
The ratio between an image's length and its height. Screens with a horizontal:vertical ratio of 16:9, such as HDTV screens, are known as wide screens.
SDTV and general computer displays have an aspect ratio of 4:3.
Component Video
A method that separates the video signal into a luminance component (Y), and a blue minus luminance (Cb or Pb) and a red minus luminance (Cr or
Pr).
Composite video
A method that combines the video signal into a luminance component and a color component for transmission down a single cable.
Contrast
The relative brightness of the light and dark areas of an image can be increased or decreased to make text and graphics stand out more clearly, or to
make them appear softer. Adjusting this particular property of an image is called contrast adjustment.
DHCP
An abbreviation of Dynamic Host Configuration Protocol, this protocol automatically assigns an IP addressg to equipment connected to a
network.
DICOM
An acronym for Digital Imaging and Communications in Medicine. An international standard that defines image standards and a communications
protocol for medical images.
Gateway Address
This is a server (router) for communicating across a network (subnet) divided according to subnet maskg.
HDCP
HDCP is an abbreviation for High-bandwidth Digital Content Protection. It is used to prevent illegal copying and protect copyrights by encrypting
digital signals sent over DVI and HDMI ports. Because the HDMI port on this projector supports HDCP, it can project digital images protected by
HDCP technology. However, the projector may not be able to project images protected with updated or revised versions of HDCP encryption.
HDTV
An abbreviation for High-Definition Television that refers to high-definition systems which satisfy the following conditions.
• Vertical resolution of 720p or 1080i or greater (p = Progressiveg, i = Interlaceg)
• Screen aspect ratiog of 16:9
Infrastructure mode
A method for wireless LAN connection in which devices communicate through access points.
Interlace
Transmits information needed to create one screen by sending every other line, starting from the top of the image and working down to the bottom.
Images are more likely to flicker because one frame is displayed every other line.
IP Address
A number to identify a computer connected to a network.
Progressive
Projects information to create one screen at a time, displaying the image for one frame. Even though the number of scan lines is the same, the amount
of flicker in images decreases because the volume of information has doubled compared with an interlace system.
e
.b
Ad hoc mode
nl
ow
D
oa
141
d
de
Glossary
m
fro
w
w
.v
w
An abbreviation for Standard Definition Television that refers to standard television systems which do not satisfy the conditions for HDTVg
High-Definition Television.
SNMP
An abbreviation for Simple Network Management Protocol, which is the protocol for monitoring and controlling devices such as routers and
computers connected to a TCP/IP network.
sRGB
An international standard for color intervals that was formulated so that colors that are reproduced by video equipment can be handled easily by
computer operating systems (OS) and the Internet. If the connected source has an sRGB mode, set both the projector and the connected signal
source to sRGB.
SSID
SSID is identification data for connecting to another device on a wireless LAN. Wireless communication is possible between devices that
correspond to SSID.
Subnet Mask
This is a numerical value that defines the number of bits used for the network address on a divided network (subnet) from the IP address.
SVGA
A screen size standard with a resolution of 800 (horizontal) x 600 (vertical) dots.
S-Video
A method that separates the video signal into a luminance component (Y) and a color component (C).
SXGA
A screen size standard with a resolution of 1,280 (horizontal) x 1,024 (vertical) dots.
Sync.
The signals output from computers have a specific frequency. If the projector frequency does not match this frequency, the resulting images are not
of a good quality. The process of matching the phases of these signals (the relative position of the crests and the troughs in the signal) is called
Synchronization. If the signals are not synchronized, flickering, blurriness, and horizontal interference occur.
Tracking
The signals output from computers have a specific frequency. If the projector frequency does not match this frequency, the resulting images are not
of a good quality. The process of matching the frequency of these signals (the number of crests in the signal) is called Tracking. If Tracking is not
carried out correctly, wide vertical stripes appear in the signal.
Trap IP Address
This is the IP addressg for the destination computer used for error notification in SNMP.
VGA
A screen size standard with a resolution of 640 (horizontal) x 480 (vertical) dots.
XGA
A screen size standard with a resolution of 1,024 (horizontal) x 768 (vertical) dots.
e
.b
rre
bo
en
d
an
SDTV
nl
ow
D
oa
142
d
de
General Notes
m
fro
w
w
Restriction of Use
When this product is used for applications requiring high reliability/safety such as
transportation devices related to aviation, rail, marine, automotive etc.; disaster
prevention devices; various safety devices etc; or functional/precision devices etc, you
should use this product only after giving consideration to including fail-safes and
redundancies into your design to maintain safety and total system reliability. Because
this product was not intended for use in applications requiring extremely high
reliability/safety such as aerospace equipment, main communication equipment,
nuclear power control equipment, or medical equipment related to direct medical care
etc, please make your own judgment on this product’s suitability after a full evaluation.
e
Illustrations in this guide and the actual projector may differ.
® Windows
® 2000 operating system
Windows XP operating system
® Windows®Vista operating system
® Windows 7 operating
®
system
®
®
Microsoft
Microsoft
Microsoft
Microsoft
.b
The contents of this guide may be changed or updated without further notice.
rre
bo
en
Seiko Epson Corporation shall not be liable against any damages or problems arising
from the use of any options or any consumable products other than those designated as
Original Epson Products or Epson Approved Products by Seiko Epson Corporation.
About Notations
d
an
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this
product or third parties for damages, losses, costs, or expenses incurred by the
purchaser or third parties as a result of: accident, misuse, or abuse of this product or
unauthorized modifications, repairs, or alterations to this product, or (excluding the
U.S.) failure to strictly comply with Seiko Epson Corporation's operating and
maintenance instructions.
.v
w
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the prior written permission of Seiko
Epson Corporation. No patent liability is assumed with respect to the use of the
information contained herein. Neither is any liability assumed for damages resulting
from the use of the information contained herein.
In this guide, the operating systems above are referred to as "Windows
2000", "Windows XP", "Windows Vista", and "Windows 7". Furthermore,
the collective term Windows may be used to refer to Windows 2000,
Windows XP, Windows Vista, and Windows 7, and multiple versions of
Windows may be referred to as, for example, Windows 2000/XP/Vista/7,
with the Windows notation omitted.
Mac
Mac
Mac
Mac
Mac
OS
OS
OS
OS
OS
X
X
X
X
X
10.3.x
10.4.x
10.5.x
10.6.x
10.7.x
In this guide, the operating systems above are referred to as "Mac OS X
10.3.x", "Mac OS X 10.4.x", "Mac OS X 10.5.x", "Mac OS X 10.6.x", and
"Mac OS X 10.7.x". Furthermore, the collective term "Mac OS X" is used to
refer to them.
nl
ow
D
oa
143
d
de
General Notes
m
fro
w
w
trademarks of HDMI Licensing LLC.
PJLink trademark is a trademark applied for registration or is already registered in
Japan, the United States of America and other countries and areas.
Foxit PDF SDK Copyright ©2011, Foxit Software Company www.foxitsoftware.com,
All rights reserved.
Other product names used herein are also for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those
marks.
©SEIKO EPSON CORPORATION 2012. All rights reserved.
e
™
.b
™
rre
bo
en
IBM, DOS/V, and XGA are trademarks or registered trademarks of International
Business Machines Corporation.
Mac and Mac OS are trademarks of Apple Inc.
App Store is a service mark of Apple Inc.
Microsoft, Windows, Windows Vista, Windows 7, PowerPoint, and Windows logo are
trademarks or registered trademarks of Microsoft Corporation in the United States
and/or other countries.
WPA and WPA2 are registered trademarks of Wi-Fi Alliance.
HDMI and High-Definition Multimedia Interface are the trademarks or registered
d
an
.v
w
Trademarks and Copyrights
nl
ow
D
oa
144
d
de
Index
m
fro
w
w
rre
bo
en
Gateway Address ......................................... 90
Basic menu .................................................... 88
Blackboard .................................................... 43
Brightness ..................................................... 80
HDMI port ................................................... 12
HDMI Video Range .................................... 81
Help function ............................................... 97
High Altitude Mode .................................... 84
How to replace the air filter ..................... 117
How to replace the lamp ........................... 115
I
ID (projector) ............................................... 65
ID (remote control) ..................................... 67
Image menu .................................................. 80
Indicators ...................................................... 98
Info menu ..................................................... 94
Input Signal ............................................ 81, 94
IP Address ..................................................... 92
E
Ceiling ..................................................... 21, 84
Ceiling mount fixing points ....................... 13
Cleaning ...................................................... 112
Cleaning the air filter and air intake vent
........................................................................ 112
Cleaning the Projector's Surface .............. 112
Color Adjustment ........................................ 80
Color correction ........................................... 65
Color Mode ............................................ 43, 80
Color Saturation .......................................... 80
Computer port ............................................. 12
Configuration menu .................................... 76
Connection mode ........................................ 89
Consumables .............................................. 122
Continuous ................................................... 60
Contrast ........................................................ 80
Email Address .............................................. 92
ESC/VP21 ................................................... 126
Extended menu ............................................ 84
E-Zoom ......................................................... 63
e
DICOM SIM ................................................. 43
Direct Power On .......................................... 84
Display ........................................................... 84
Display Background .................................... 84
Display order ................................................ 60
Display Settings ............................................ 59
Distance ...................................................... 130
Document camera ..................................... 121
Dynamic ........................................................ 43
.b
H
D
B
C
G
d
an
A/V Mute ...................................................... 60
Abs. Color Temp. ........................................ 80
Air exhaust vent ........................................... 11
Air filter replacement period ................... 117
Aspect ...................................................... 45, 82
Auto H/V-Keystone .................................... 82
Auto Iris .................................................. 44, 80
Auto Setup .................................................... 81
Control panel ............................................... 14
Control Panel Lock ............................... 73, 83
Cross .............................................................. 63
Customized ................................................... 43
.v
w
A
K
F
Keystone ........................................................ 82
Focus button ................................................. 15
Focus ring ..................................................... 12
Foot adjust lever ........................................... 11
Freeze ............................................................. 61
Front ........................................................ 21, 84
Front adjustable foot ................................... 11
Full Lock ....................................................... 73
L
Lamp cover ................................................... 12
Lamp hours ................................................... 94
Lamp indicator ............................................. 98
Lamp replacement period ........................ 114
Language ....................................................... 85
Lens Cover Timer ........................................ 84
Link21L ......................................................... 85
nl
ow
D
oa
145
d
de
Index
m
fro
w
w
Power indicator ............................................ 98
Power inlet .................................................... 12
Power On Protect ........................................ 71
Presentation ........................................... 43, 52
Problem Solving ........................................... 98
Progressive .................................................... 81
Projection ...................................................... 84
Projector ID ............................................ 66, 85
Projector keyword ....................................... 88
Projector Name ............................................ 88
Projector Setup ........................................... 123
e
O
.b
86
86
86
81
rre
bo
en
N
Screen Size .................................................... 51
Screen size ................................................... 130
Screen switching time ................................. 60
Security menu .............................................. 90
Security slot .................................................. 13
Select Drive ................................................... 54
Settings menu ............................................... 82
Sharpness ...................................................... 80
Signal menu .................................................. 81
Sleep Mode ................................................... 84
Slideshow .......................................... 52, 53, 58
SMTP Server ................................................. 92
SNMP .......................................................... 126
Soft keyboard ................................................ 87
Source ...................................................... 50, 94
Source Search ......................................... 14, 30
Specifications ............................................. 135
Split screen .................................................... 49
Split Screen Setup ........................................ 50
Sports ............................................................. 43
sRGB .............................................................. 43
SSID ............................................................... 89
Standby Mode .............................................. 85
Startup Screen .............................................. 84
Storage temperature .................................. 135
Subnet Mask ................................................. 90
Supported Monitor Displays .................... 133
Swap Screens ................................................ 50
Sync Info ....................................................... 94
Sync. ............................................................... 81
d
an
Mail menu ..................................................... 91
Mail Notification ................................. 92, 125
Messages ....................................................... 84
Monitor Displays ....................................... 133
Mouse pointer .............................................. 64
Multi-screen ........................................... 65, 85
Network Configuration ..............................
Network information ..................................
Network menu .............................................
Noise Reduction ...........................................
.v
w
M
Q
Quick Corner ............................................... 82
R
Operating temperature ............................. 135
Operation ...................................................... 84
Optional accessories .................................. 121
Overheating .................................................. 99
Reading Mail .............................................. 125
Rear .......................................................... 21, 84
Rear feet ........................................................ 13
Rear screen .................................................... 21
Refresh Rate .................................................. 94
Remote control ............................................ 15
Remote receiver ..................................... 11, 13
Replacing batteries ....................................... 18
Reset All ........................................................ 95
Reset menu ............................................. 93, 94
Resetting the lamp operating time
.................................................................. 95, 117
Resolution ..................................................... 94
Rotating images ........................................... 55
P
Part Names and Functions ......................... 11
Password protect .......................................... 71
Password protect sticker ............................. 72
Photo ............................................................. 43
PJLink .......................................................... 129
PJLink Password .......................................... 88
Pointer ........................................................... 61
Pointer Shape ............................................... 83
Port Number ................................................ 92
Position ......................................................... 81
Power Consumption ................................... 83
S
T
Temp indicator ............................................ 98
Screen fit ....................................................... 35
nl
ow
D
oa
146
d
de
Index
m
fro
w
w
W
Web Browser .............................................. 123
Web Control ............................................... 123
Web Control Password ............................... 88
Web Remote ............................................... 124
Whiteboard ................................................... 43
Wide-screen projection .............................. 45
Wireless LAN indicator .............................. 11
Wireless LAN menu .................................... 89
Wireless LAN Power ................................... 89
Wireless LAN system .................................. 89
Wireless LAN unit cover ............................ 11
Wireless mouse function ............................ 64
e
Video Port ..................................................... 12
Video Signal ........................................... 81, 94
Volume .......................................................... 83
.b
V
Zoom ring ..................................................... 11
rre
bo
en
12
12
85
83
69
71
d
an
USB (TypeA) port ........................................
USB (TypeB) port ........................................
USB Type B ...................................................
User Button ..................................................
User's Logo ...................................................
User's Logo Protect ......................................
U
Z
.v
83
43
80
81
w
Test Pattern ..................................................
Theatre ..........................................................
Tint ................................................................
Tracking ........................................................