advertisement
New Concept Drywall Products
WIDE-FLEX 4 Product Code WF-100
DESCRIPTION
(Speed,
Perfection and
Longevity)
ADVANTAGES
Patented PVC tight fibered cotton composite corner tape with diamond-punched paper edging that is 4 ” wide, .025” thick and comes in 100’ rolls.
Strait-Flex Wide-Flex 4 has PUR-laminated nose to protect against paper fuzz-ups during finishing and sanding.
WARRANTY
DIRECTIONS
Hard-to-Straighten Vaults, Butterfly Vaults, Outside Corners and Obtuse Angles.
Straightens small framing irregularities.
Memory-free hinge design allows for ease of installation and straighter corners.
Installs fast using standard compounds. No special tools or fasteners needed. No nail pops.
Inside 90 º corners where a large fill or straightening is required, or where strength and speed of finish are required.
Diamond-punched paper ensures ultimate bonding and faster drying.
Second coat of compound can be applied immediately-very light skim coat to finish.
Use in place of metal cornerbead.
Rustproof.
No. Cracks. No Callbacks.
Strait-Flex products are backed by a lifetime warranty. When applied to a sound structure, built on a permanent foundation using recommended application techniques, we warrant that these products will not edge-crack for the lifetime of the structure. Contact Strait-Flex
International Inc for complete details.
Cut Strait-Flex to desired length. Adjust to desired angle.
Apply using a liberal coat of all-purpose compound with joint knife. Use tile setting compounds in wet areas.
Press Strait-Flex into wet compound. Adjust if necessary to create straight line and wipe down with joint knife. Immediately apply light skim coat and let dry.
Apply final coat, let dry and sand.
STORAGE Store in dry place protected from moisture.
Submittal Approvals:
Job Name:
Contractor: Date:
I:\Marketing and Promotion\Product Information\Submittle Info Sheets\Wide-Flex 4 instruction_assembly.doc
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project