USER’S MANUAL

Scouting Trail Camera

Contents

1. Whole View and Details of Camera ............................................................................. - 1 -

Front View of Camera ...........................................................................................................- 1 -

Camera Screen Display (Test Mode Main Interface) .............................................................- 2 -

2. Camera Menu List Introduction ................................................................................... - 3 -

3. Quick Start ................................................................................................................. - 4 -

Power On Camera .................................................................................................................- 4 -

Manual Photographing/ Video Recording ............................................................................- 4 -

Enter Menu for Setup Functions ...........................................................................................- 4 -

Power Off Camera .................................................................................................................- 4 -

Camera Operation Flow Chart ...............................................................................................- 5 -

4. Detail Setups .............................................................................................................. - 6 -

Camera Modes (Default Settings) .........................................................................................- 6 -

Photo Settings (Default Settings) ..........................................................................................- 7 -

Video Settings(Default Settings) ...........................................................................................- 8 -

Camera Settings (Default Settings) ........................................................................................- 9 -

Software Upgrade............................................................................................................... - 11 -

USB Connection.................................................................................................................. - 12 -

5. MicroSD Card Selection & Battery Life Test Report ..................................................... - 13 -

MicroSD Card Selection ...................................................................................................... - 13 -

Battery Life Test Report for Reference ............................................................................... - 13 -

6. Specification ............................................................................................................. - 14 -

7. Warranty .................................................................................................................. - 16 -

1. Whole View and Details of Camera

Front View of Camera

Light Sensor

LCD Screen day/night

Indicator Light

13 IR LEDs

13 IR LEDs PIR Sensor

Lens

Power/Navigation Button Menu/OK Button

USB Port/ DC in

SIM Card Slot

Invalid Currently MicroSD Card Slot

Screw Slot

Battery Slot

- 1 -

Camera Screen Display (Test Mode Main Interface)

Photo Mode Interface

Photographing hour/min/sec

Photo Resolution

Multi Shot Number

0001: recorded file number of photos & video clips

9998: estimated available file number based on left memory space in memory card

Video Recording

Video Mode Interface

Video FPS

Video Resolution

Year/month/date Battery Left Volume

Photo + Video Mode Interface

Note: camera support camera, video, camera + video three different working modes; screen display will be different based on different working mode.

- 2 -

2. Camera Menu List Introduction

1) First Navigation Menu

Camera ID

Photo Video Photo+Video Settings

2) Second Navigation Menu: Settings

：

Delete

Back to

Previous Page

Photo Video Timer Time Lapse Delay Stamp SD Cycle Camera Sound

PIR Sensitivity

Date/Time

3) Third Navigation Menu

GPRS ON/OFF

Password

Reset

Back to

Previous Page

Photo Settings Video Settings

Photo Size Multi Shot

Video

Resolution

Video

Length

Video

Frame

Frequency Video

Sound

- 3 -

3. Quick Start

1.

Open back cover to insert MicroSD Card and batteries;

Power On Camera

2.

Press and hold Power/Navigation button for 3 sec; camera will enter PIR Auto Working mode after indicator flashes 5 times;

3.

Press Menu/OK button once to wake up camera LCD screen to enter TEST Mode;

Manual Photographing/ Video Recording

4.

Test Mode Main Interface, press Power/Navigation button again to shoot photos, videos, or photo + video based on camera settings; stop video recording by pressing again

Power/Navigation button

Enter Menu for Setup Functions

5.

Test Mode Main Interface,

press Menu/OK button to enter settings menu; now button is always for navigation; button is always for OK to save/confirm needed setup;

6.

Press and hold button for 3 seconds to return Test Mode Main Interface (Camera Modes

Menu) after all settings are done;

7.

Test Mode Main Interface, press and hold button for 3 seconds to enter PIR Auto

Working Mode; (indicator LED will flash 5 times, Screen will be off.)

Power Off Camera

8.

Press and hold button for 5 seconds to turn off camera.

- 4 -

Camera Operation Flow Chart

Press and hold Power / Navigation button for

PIR Auto

3 sec; camera will enter PIR Auto Working mode

Working Mode

after indicator flashes 5 times;

ON/OFF Camera

Menu / OK

(PIR Auto, TEST, OFF)

TEST Mode

button once to wake up camera LCD screen to enter TEST Mode;

Press and hold

Power / Navigation button for 5 seconds to turn off camera.

Functions

Setup

Configuration

Return to First

Navigation Menu

Enter PIR Auto Working

Mode from Test Mode

In TEST Mode, press Menu/OK button to enter settings menu; now button is always for navigation; button is always for OK to save/confirm needed setup;

Press and hold button for 3 seconds to return back to First Navigation Menu after all settings are done

In First Navigation Menu, press and hold button for 3 seconds to enter PIR Auto Working Mode;

Manual Recording

1. Set Camera, or Video, or Camera + Video

First Navigation Menu

, press Menu / OK button ; camera is in camera mode;

, press Menu / OK button ; camera is in video mode;

, press Menu/OK button ; camera is in Cam+Video mode

2. After configuration above, press and hold button for 3 seconds to return back to TEST Mode main interface; then press

Power/Navigation button ; camera now is recording photo/ video/ photo + video;

3. Press Power/Navigation button again to stop video recording;

Note:

1) To ensure camera functions well; plz adjust camera to be with correct time;

2) Plz don’t turn on Time Lapse and Delay at the same time;

3) Camera can be turned off by pressing and holding button any time.

- 5 -

4. Detail Setups

Camera Modes (Default Settings)

Camera ID OFF

Photo 2MP

Video VGA (640*480)

Photo+Video OFF

Settings

Delete

Back to Previous Page

If wanted setting icon is not showing on camera LCD screen, press repeatedly until it appears. a. Set up

Camera ID

1） Press to enter configuration page, press to choose

ON; press again to enter configuration page;

2） Press to choose wanted digit/alphabet, press to confirm and move to the next;

3） Press again to confirm combination to exit. b. How does this work?

Selected 4 digits/ alphabets will show on the photo stamp.

Such function can help user to identify photos are from where

Photo and which camera. a. Set up

Press to enter Photo mode; icon OK appears at right bottom of interface b. Take a Photo

Press and hold button for 3 seconds to return back to TEST

Mode main interface; then press to take a photo a. Set up

Press to enter Video mode; icon OK appears at right bottom

Video of interface

- 6 -

b. Start Recording

Press and hold button for 3 seconds to return back to TEST

Mode main interface; then press to take a video clip; press again to stop recording. a. Set up

Press to enter Photo + Video mode; icon OK appears at

Photo + Video right bottom of interface b. Start Recording; Photo(s) First, then Recording Video

Press and hold button for 3 seconds to return back to TEST

Mode main interface; then press to start recording; press again to stop recording.

Press to enter camera detail settings.

Settings

Delete

Set up

1) Press to enter configuration page, press to choose to delete One or All recorded file(s), or Format SD card;

2) Press choose Yes/ No, press again to confirm deletion/ Format.

Note: 1)

Menu will stay in Yes/No interface in deleting One file; plz press “No” to get back to previous interface.

This is designed to enable user to delete several files together without pressing more buttons.

2)

If all files are deleted, camera will get back to TEST Mode Main Interface automatically.

Press to get back to

TEST Mode main interface

Photo Settings (Default Settings)

Image Size 2M

Multi-shot 1P

If wanted setting icon is not showing on camera LCD screen, press repeatedly until it appears.

Image Size

Set up

Press to enter configuration page, press to choose desired Photo Size; press to confirm setting.

(8MP/5MP/2MP: 3264x2448, 2560x1920, 1920x1080)

- 7 -

Multi-shot

Set up

Press to enter configuration page, press to choose desired Photo Burst number; press to confirm setting.

(Support 1~7 photos per burst/ trigger.)

Video Settings(Default Settings)

Video Size VGA

Video Length 5s

Video Frame 30FPS

Frequency 50Hz

Audio Recording ON

If wanted setting icon is not showing on camera LCD screen, press repeatedly until it appears.

Video Size

Set up

Press to enter configuration page, press to choose desired Video Size, press to confirm setting.

(720P/VGA/CIF: 1280x720/640x480/320x240)

Video Length

Video Frame

Set up

Press to enter configuration page, press to choose desired Video Length per Burst/ Trigger; press to confirm setting.

(Support 5~60 seconds)

Set up

Press to enter configuration page, press to choose desired Video Frame; press to confirm setting.

Frequency

(Optional 15FPS and 30FPS)

Set up

Press to enter configuration page, press to choose desired Frequency based on local Country Frequency; press to confirm setting.

(Optional 50HZ and 60HZ)

Audio Recording

Set up

Press to enter configuration page, press to choose to turn

ON/ OFF audio recording in video; press to confirm setting.

Select “ON”, audio available in video clips.

- 8 -

Camera Settings (Default Settings)

Timer OFF

Time Lapse OFF

Delay OFF

Stamp ON

SD Cycle Recording OFF

Camera Sound ON

PIR Sensitivity High

Time/Date

GPRS Switch OFF

Camera Password OFF

Reset NO

If wanted setting icon is not showing on camera LCD screen, press repeatedly until it appears. a. Set up

Timer

1) Press to enter configuration page, press to choose ON; press again to set timer;

2) Press to choose wanted number, press to confirm and move to next number;

3) Press again after Start time and End Time is set to Exit. b. How does this work?

Camera will only work during pre-set Start Time and End

Time.

a. Set up

Time Lapse

1) Press to enter configuration page, press to choose ON; press again to set Time Lapse;

2) Press to choose wanted number, press to confirm and move to next number;

- 9 -

Delay

Stamp

SD Cycle Recording

Camera Sound

PIR Sensitivity

3) Press again after all numbers are selected to Exit. b． How does this work?

Camera will take photos/ videos automatically upon the interval user set. a. Set up

1) Press to enter configuration page, press to choose ON; press again to set Delay;

2) Press to choose wanted number, press to confirm and move to next number;

3) Press again after all numbers are selected to Exit. b. How does this work?

Camera will take photos/ videos based on the pre-set time interval upon motion. This option prevents from taking too many photos or videos. a. Set up

Press to enter configuration page, press to choose

ON/OFF; press to confirm setting.

b. How does this work?

Left battery volume, Moon phase, Temperature, Date/Time, and pre-set Camera ID will be displayed on every photo. a. Set up

Press to enter configuration page, press to choose

ON/OFF; press to confirm setting.

b. How does this work?

Select “ON”, camera will continue to record photos/videos by deleting earliest photos or video clips recorded in SD card. a. Set up

Press to enter configuration page, press to choose

ON/OFF; press to confirm setting.

b. How does this work?

Select “OFF” to turn off camera speaker. a. Set up

Press to enter configuration page, press to choose

High/Middle/Low; press to confirm setting.

b. How does this work?

High/ Middle/ Low;

Higher sensitivity is 1) more sensitive to movements by smaller subjects; 2) longer detection distance; 3) easier for sensor to detect difference between body heat and outdoor temperature; 4) easier to trigger camera to record. In

high temperature

environment, body heat of subjects and environment temperature is hard to tell by camera,

suggest to set High

.

- 10 -

Time/Date

Camera Password

Reset a. Set up

1) Press to enter configuration page;

2) Press to choose, press to confirm wanted number and move to next number;

3) Press again to Exit after all numbers are selected. b. How does this work?

Date/Time; Date: “month/ date/ year”; Time: “hour/minute”

Note: Plz adjust Time/Date when you turn on camera to ensure camera to function well as expected.

a. Set up

1) Press to enter configuration page, press to choose ON; press again to set Password;

2) Press to choose wanted digit, press to confirm and move to next number;

3) Press again to confirm. b. How does this work?

Enable password protection for your camera; support totally 6 digits long password access. a. Set up

Press to enter configuration page, press to choose

YES/NO; press to confirm setting.

b. How does this work?

Choose YES to reset camera settings back to factory default settings.

Software Upgrade

1. Copy the upgrade software files (3 files) into MicroSD Card;

Note: Suggest to use 1 or 2 GB SD card to do the upgrade.

2. Insert MicroSD Card into camera;

3. Insert batteries/ or plug in USB power cable;

4. Press and hold Power/Navigation button , camera speaker emits one Beep

Sound;

5. Release button when you see red indicator led flashes;

6. Then press and hold Menu/OK button ;

Note: red indicator LED stops flashing but keeps lighting up;

7. Release button after you see until

ISP

interface shows up in screen

8. Upgrade succeeds when red indicator led is off;

9. Plug out batteries/or power cable;

10. Insert batteries/ or power cable; turn on camera. Done.

- 11 -

Note: Don’t cut off power supply during software upgrade; otherwise, camera will not be able to be turned on again unless software upgrade via PC.

USB Connection

When camera is connected via USB, press and hold button , camera speaker emits one Beep Sound, and red indicator LED lights up; then interface below appears.

Press to choose DC in, or PC connection; press to confirm choosing. a. DC in for Power Supply

Camera enters Test Mode Main Interface. b. PC Connection to Read MicroSD Card

Camera screen shows interface as below. Now you can read MicroSD Card contents via PC.

By pressing again, camera will be turned into a PC camera; press again to Exit.

Plug out power cable to turn off camera and restart.

- 12 -

5. MicroSD Card Selection & Battery Life Test Report

MicroSD Card Selection

A memory card is required to operate the camera. When the camera is "ON" and no memory card is inserted, screen displays "No SD Card". Micro SD Card slot of camera supports up 32 GB memory card. Before inserting or removing the memory card, the camera must be powered OFF. Failing to do so may cause loss of or damage the pictures already recorded in the memory card. Following data shows an approximate quantity of photos which can be recorded by the camera depending on the memory card capacity.

Chart below will show you the approximate capacity of different size SD cards.

Pls check to see which size card can fit your needs best.

SD

Size

Capacity

1GB 2 GB 4 GB 8 GB 16 GB 32 GB

2 MP

5 MP

8 MP

1645

653

421

3195

1244

796

Photo (pictures)

6197 12401

2356

1488

4453

2873

23786

7957

4864

50146

14241

8092

Video (hours)

720P HD 00:09:50 00:18:41 00:35:15 01:06:51 02:11:18 04:20:54

640x480

00:21:31 00:41:58 01:22:13 02:47:27 05:29:13 13:01:16

320x160

00:50:45 01:44:18 03:21:04 06:37:45 13:22:58 27:00:20

Battery Life Test Report for Reference

2MP

5MP

8MP

Test Condition: LCD screen off. Mode: “Power On” _PIR intelligent automatically monitoring

4AA Alkaline Batteries

Photos shot per day Working time Video clips shot per day

IR LEDs On

Working time

2MP 100 photos 26 days 320× 240 10 sec 10 clips 47 days

5MP

8MP

100 photos

100 photos

100 photos

100 photos

100 photos

24 days

21 days

51 days

48 days

46 days

640× 480 10 sec

1280× 720 10 sec

IR LEDs Off

320× 240

640× 480

10 sec

10 sec

1280× 720 10 sec

10 clips

10 clips

10 clips

10 clips

10 clips

44 days

41 days

185 days

170 days

161 days

- 13 -

Model

Recording

Video Format

Video Resolution

Video Frame Rate

Video Length

Still Image Format

Still Image Resolution

Shooting Numbers

Photo Stamp

Record Delay

Night Vision

Night Vision Distance

No. of Infra-Red LEDs

General

Image Sensor

Lens

Effective IR Flash

Infrared Cut Filter

White Balance

Day/Night Mode

Minimum Illumination

Effective PIR Angle

PIR Sensitivity

Audio Recording

Operation Power

Battery Type

Auto Power Off

Interface

Memory Type and Size

Display

Language

6. Specification

2C

.avi

720P (1280*720)

D1 (640*480)

CIF (320*240)

15 / 30 FPS; programmable

5-60sec. programmable

JPEG

2MP (1920x1080)

5MP (2560x1920)

8MP(3264x2448)

1~7 photos/trigger(programmable)

Battery left volume moon phase temperature

Date & time camera ID—4 digits/ alphabets combination

(Programmable by User)

1second~23h 59min 59sec

8~10m, 30 feet

26pcs

1.3 Mega Pixels Color CMOS

F=3.0; FOV=49°; Auto IR-Cut-Remove

8 meters

Yes

Automatic

Color during day / B&W at night

0 Lux (IR on)

100°

High / Normal / Low 3 levels

Yes

6~12V DC (1~2A)

4 AA

Enter PIR Auto Mode in 1min without any operations

USB; Micro SD card slot

Micro SD Card, up to 32G

1.0 inch B/W Screen

English

- 14 -

Sensor Type

Sensor Range

Sensor Trigger Speed

Power Consumption

PIR (Passive Infrared)

12~15m; 50 feet

0.8-1 sec

150mA

(+1380mA: 940nm IR LEDs on)

(+1080mA: 850nm IR LEDs on)

Low Battery Alert

Stand-by Time

Operating Temperature

Operation Humidity

Waterproof spec

Dimensions

Weight

Certification

Yes

4 months (4 AA batteries)

(-20 ~ 60) °C

5%-90%

IP54

100.4*70.44*51.32mm

171.2 g

CE, FCC, RoHs

Functions

Photo+Video

Time Lapse

Timer

Time Lapse Delay

Password Protection

SD Card Cycle Recording

Yes

Yes

Yes

Yes

Yes, 6 digits

Yes

Auto Power Off in Test Mode Yes

Water/WeatherProof Yes

Specifications are subject to change without prior notice

- 15 -

7. Warranty

With great pride and full confidence in our products, we always keep our words which are given to our customers as specified warranty terms and service below.

Based on a strict QC system, we initially offer all our customers one year long time limited warranty , come along with selectable chargeable renewal policy of warranty as one, two, three, or four years .

Our products are warranted against defects in materials and workmanship for a period of one year from the date of original purchase. If a defect exists, we will, at our option and to extent permitted by law will (1) repair the product at no charge using new or refurbished parts; (2) exchange the product with a functionally equivalent product that is new or refurbished. Provided the product is returned freight charge paid.

This warranty excludes damage resulting from abuse, accident, modifications or other causes that are not defects in materials and workmanship, or by someone other than our authorized technicians. This warranty only covers failures due to defects in materials or workmanship under normal usage.

To obtain warranty service, please contact us to determine the nature of problem before return the product under this warranty (with a written description of the problem and print samples) for repairing or exchanging.

- 16 -