Automatic
Fully Integrated
Washing Machine
WMI 71641
WMI 71441
Please read this user manual first!
Dear Customer,
We hope that you get the best results from the product which has been manufactured
in state-of-the-art plants and passed through a strict quality control procedure.
Therefore, please read the entire user manual carefully before using the product and
keep it as a reference for future use. In case of transferring the product to someone
else, give the manual as well.
The user manual will help you use your machine in a
fast and safe way.
• Read the user manual before installing and starting your product.
• Always follow the safety instructions.
• Keep this user manual within easy reach for future reference.
• Read also the other documents supplied with the product.
Remember that this user manual is also applicable for several other models.
Differences between models will be identified in the manual.
Explanation of symbols
Throughout this user manual the following symbols are used:
2820521336_EN/300911.1013
CImportant information or useful hints about usage.
AWarning for hazardous situations with regard to life and property.
BWarning for electric shock.
This appliance’s packaging material is recyclable. Help recycle it and protect
the environment by dropping it off in the municipal receptacles provided
for this purpose. Your appliance also contains a great amount of recyclable
material. It is marked with this label to indicate the used appliances that
should not be mixed with other waste. This way, the appliance recycling
organised by your manufacturer will be done under the best possible
conditions, in compliance with European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment. Contact your town hall or your retailer
for the used appliance collection points closest to your home. We thank you
doing your part to protect the environment.
2
EN
TABLE OF CONTENTS
1 Your washing machine
4
5 Selecting a Program and
Operating Your Machine
18
Overview . . . . . . . . . . . . . . . . . . . . . . 4
Technical specifications . . . . . . . . . . . 5
2 Warnings
Control panel . . . . . . . . . . . . . . . . . . 18
Display symbols . . . . . . . . . . . . . . . . 19
Turning the machine on . . . . . . . . . . 19
Program selection. . . . . . . . . . . . . . . 19
Additional programs . . . . . . . . . . . . 19
Special programs . . . . . . . . . . . . . . . 20
Temperature selection. . . . . . . . . . . . 21
Spin Speed selection . . . . . . . . . . . . 21
Program and consumption table. . . . 22
Auxiliary functions . . . . . . . . . . . . . . . 24
Time display . . . . . . . . . . . . . . . . . . . 24
Starting the Program . . . . . . . . . . . . 25
Progress of program . . . . . . . . . . . . . 25
Changing the selections after the
program has started . . . . . . . . . . . . . 26
Switching the machine to standby
mode . . . . . . . . . . . . . . . . . . . . . . . . 26
Child-proof lock . . . . . . . . . . . . . . . . 26
Ending the program through cancelling26
Program in rinse hold mode . . . . . . . 27
End of program . . . . . . . . . . . . . . . . 27
6
General Safety . . . . . . . . . . . . . . . . . . 6
First Use . . . . . . . . . . . . . . . . . . . . . . . 6
Intended use . . . . . . . . . . . . . . . . . . . 6
Safety instructions . . . . . . . . . . . . . . . 7
If there are children in your house... . . 7
3 Installation
8
Appropriate installation location . . . . . 8
Removing packaging reinforcement . . 8
Removing the transportation locks . . . 8
Connecting water supply . . . . . . . . . . 9
Connecting to the drain . . . . . . . . . . . 9
Adjusting the feet . . . . . . . . . . . . . . . 10
Raising the appliance . . . . . . . . . . . . 10
Electrical connection. . . . . . . . . . . . . 11
First use . . . . . . . . . . . . . . . . . . . . . . 12
Disposing of packaging material . . . . 12
Transportation of the product . . . . . . 12
Disposing of the old product . . . . . . . 12
4 Preparation
7 Troubleshooting
31
8 Guarantee
37
9 Service
38
10BUILT-IN INSTALLATION 39
13
Things to be done for energy saving . 13
Sorting the laundry . . . . . . . . . . . . . . 13
Preparing laundry for washing. . . . . . 13
Correct load capacity . . . . . . . . . . . . 14
Loading the laundry . . . . . . . . . . . . . 14
Detergents and softeners . . . . . . . . . 15
Tips for efficient washing . . . . . . . . . 17
3
EN
1 Your washing machine
Overview
1
8
2
3
7
6
4
5
1- Power cable
2- Top lid
3- Control panel
4- Filter cap
5- Adjustable feet
6- Loading door
7- Detergent drawer
8- Drain hose
4
EN
Technical specifications
Models (EN)
WMI71641
WMI71441
Maximum dry laundry capacity (kg)
7
7
Height (cm)
82
82
Width (cm)
60
60
Depth (cm)
54
54
Net weight (±4 kg.)
73
72
230 V / 50Hz
230 V / 50Hz
Total current (A)
10
10
Total power (W)
2200
2200
Spin speed (rpm max.)
1600
1400
Stand-by mode power (W)
1.40
1.40
Off-mode power (W)
0.20
0.20
Electrical input (V/Hz)
specifications may be changed without prior notice to improve the quality of
CTechnical
the product.
in this manual are schematic and may not match the product exactly.
CFigures
Values
stated
the product labels or in the documentation accompanying it
C are obtained inonlaboratory
conditions in accordance with the relevant standards.
Depending on operational and environmental conditions of the product, these values
may vary.
5
EN
2 Warnings
Please read the following information.
Otherwise, there may be the risk of
personal injury or material damage.
Moreover, any warranty and reliability
commitment will become void.
First Use
General Safety
• Never place your machine on a
carpet covered floor. Otherwise,
lack of airflow from below of your
machine may cause electrical parts to
overheat. This may cause problems
with your washing machine.
• If the power cable or mains plug is
damaged you must call Authorized
Service for repair.
• Check water hoses for wear. Do not
use old/used water inlet hoses. These
may cause stains on your laundry.
• Fit the drain hose into the discharge
housing securely to prevent any water
leakage and to allow machine to take
in and discharge water as required.
It is very important that the water
intake and drain hoses are not folded,
squeezed, or broken when the
appliance is pushed into place after it
is installed or cleaned.
• Your washing machine is designed to
continue operating in the event of a
power interruption. You cannot cancel
any program by pressing the “On/Off
button.” Your machine will not resume
its program when the power restores.
Press the “Start/Pause/Cancel”
button for 3 seconds to cancel the
program (See, Cancelling a Program)
• There may be some water in your
machine when you receive it. This is
from the quality control process and
is normal. It is not harmful to your
machine.
• Some problems you may encounter
may be caused by the software.
Press “Start/Pause/Cancel” button
for 3 seconds to cancel the program
set in your machine before calling the
authorized service.
6
• To prepare your machine for washing,
carry out your first washing process
without loading your machine and
with detergent under “Cottons 90°C”
program.
• Ensure that the cold and hot water
connections has been made correctly
when installing your machine.
Otherwise, your laundry may come
out hot at the end of the washing
process and may wear out.
• If the current fuse or circuit breaker is
less than 16 Amperes, please have
a qualified electrician install a 16
Ampere fuse or circuit breaker.
• While using with or without a
transformer, do not neglect to have
the grounding installation laid by a
qualified electrician. Our company
shall not be liable for any damages
that may arise when the machine is
used on a line without grounding.
• To make your machine ready for use,
please be sure that the tap water
supply and water drainage systems
are appropriate before calling the
authorized service. If they are not,
call a qualified plumber to have any
necessary arrangements carried out.
Intended use
• This product has been designed for
home use.
• The appliance may only be used for
washing and rinsing of textiles that
are marked accordingly.
• Only detergents, softeners and
supplements suitable for washing
machines may be used.
• Observe the care instructions labelled
on textile products and any other
instructions given by companies that
produce detergents for your machine.
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
EN
concerning use of the appliance by a
person responsible for their safety.
it is operating. Do not let them tamper
with the machine.
• Close the door when you leave the
area where the machine is located.
• Store all detergents in a safe place out
of reach of the children.
Safety instructions
• This appliance must be connected to
an earthed outlet protected by a fuse
of suitable capacity.
• The supply and draining hoses must
always be securely fastened and
remain in an undamaged state.
• Fit the draining hose to a washbasin
or bathtub securely before starting up
your machine. There may be a risk of
being scalded due to high washing
temperatures!
• Never open the door or remove the
filter while there is still water in the
drum. Otherwise, there may be the
risk of flooding and possible injury
due to the hot water.
• Never force open the locked door!
The door will be ready to open just a
few minutes after the washing cycle
comes to an end.
• Unplug the machine when it is not in
use.
• Never wash down the appliance
with a water hose! There is the risk
of electric shock! Always disconnect
from the mains by unplugging before
cleaning.
• Never touch the plug with wet hands.
Never unplug by pulling on the cable,
always pull out from the plug only. Do
not operate the machine if the power
cord or plug is damaged.
• Never attempt to repair the machine
yourself. Otherwise, you may be
putting yours and other’s lives in
danger.
• For malfunctions that cannot be
solved by information in the operating
manual:
Turn off the machine, unplug it, turn
off the water tap and contact an
authorized service agent.
If there are children
in your house...
• Electrical appliances may be
dangerous for the children. Keep
children away from the machine when
7
EN
3 Installation
Refer to the nearest Authorised Service
Agent for installation of the product. To
make the product ready for use, review
the information in the user manual and
make sure that the electricity, tap water
supply and water drainage systems are
appropriate before calling the Authorized
Service Agent. If they are not, call a
qualified technician and plumber to have
any necessary arrangements carried out.
Preparation of the location and
electrical, tap water and waste water
installations at the place of installation
is under customer's responsibility.
Installation and electrical connections
of the product must be carried out
by the Authorized Service Agent.
Manufacturer shall not be held
liable for damages that may arise
from procedures carried out by
unauthorized persons.
Prior to installation, visually check if
the product has any defects on it. If
so, do not have it installed. Damaged
products cause risks for your safety.
Make sure that the water inlet and
discharge hoses as well as the power
cable are not folded, pinched or
crushed while pushing the product
into its place after installation or
cleaning procedures.
Removing packaging
reinforcement
Tilt the machine backwards to remove
the packaging reinforcement. Remove the
packaging reinforcement by pulling the
ribbon.
C
B
A
C
Appropriate installation location
• Place the machine on a rigid floor.
Do not place it on a long pile rug or
similar surfaces.
• Total weight of the washing machine
and the dryer -with full load- when
they are placed on top of each other
reaches to approx. 180 kilograms.
Place the product on a solid and flat
floor that has sufficient load carrying
capacity!
• Do not place the product on the
power cable.
• Do not install the product at places
where temperature may fall below
0ºC.
• Place the product at least 1 cm away
from the edges of other furniture.
8
Removing the
transportation locks
not remove the transportation
ADo
locks before taking out the packaging
reinforcement.
the transportation safety
ARemove
bolts before operating the washing
machine, otherwise, the product will
be damaged.
1. Loosen all the bolts with a spanner
until they rotate freely (C).
2. Remove transportation safety bolts
by turning them gently.
EN
3. Attach the plastic covers supplied in
the User Manual bag into the holes
on the rear panel. (P)
the transportation safety bolts
CKeep
in a safe place to reuse when the
that the cold and hot water
AEnsure
connections are made correctly when
washing machine needs to be moved
again in the future.
Never move the product without the
transportation safety bolts properly
fixed in place!
installing the product. Otherwise, your
laundry will come out hot at the end
of the washing process and wear out.
2. Tighten all hose nuts by hand. Never
use a wrench when tightening the
nuts.
C
Connecting water supply
water supply pressure required
CThe
to run the product is between 1 to 10
bars (0.1 – 10 MPa). It is necessary
to have 10 – 80 liters of water flowing
from the fully open tap in one minute
to have your machine run smoothly.
Attach a pressure reducing valve if
water pressure is higher.
If you are going to use the double
water-inlet product as a single (cold)
water-inlet unit, you must install the
supplied stopper to the hot water
valve before operating the product.
(Applies for the products supplied
with a blind stopper group.)
If you want to use both water inlets
of the product, connect the hot water
hose after removing the stopper and
gasket group from the hot water
valve. (Applies for the products
supplied with a blind stopper group.)
Models with a single water inlet
should not be connected to the hot
water tap. In such a case the laundry
will get damaged or the product will
switch to protection mode and will
not operate.
Do not use old or used water inlet
hoses on the new product. It may
cause stains on your laundry.
1. Connect the special hoses supplied
with the product to the water inlets
on the product. Red hose (left) (max.
90 ºC) is for hot water inlet, blue hose
(right) (max. 25 ºC) is for cold water
inlet.
C
3. Open the taps completely after
making the hose connection to check
for water leaks at the connection
points. If any leaks occur, turn off the
tap and remove the nut. Retighten
the nut carefully after checking the
seal. To prevent water leakages and
damages caused by them, keep the
taps closed when the machine is not
in use.
C
Connecting to the drain
• The end of the drain hose must be
directly connected to the wastewater
drain or to the washbasin.
Your house will be flooded if the
hose comes out of its housing
during water discharge. Moreover,
there is risk of scalding due to high
washing temperatures! To prevent
such situations and to ensure smooth
water intake and discharge of the
machine, fix the end of the discharge
hose tightly so that it cannot come
out.
A
A
A
9
EN
• The hose should be attached to a
height of at least 40 cm, and 100 cm
at most.
• In case the hose is elevated after
laying it on the floor level or close
to the ground (less than 40 cm
above the ground), water discharge
becomes more difficult and the
laundry may come out excessively
wet. Therefore, follow the heights
described in the figure.
• To prevent flowing of dirty water back
into the machine and to allow for easy
discharge, do not immerse the hose
end into the dirty water or drive it in
the drain more than 15 cm. If it is too
long, cut it short.
• The end of the hose should not be
bent, it should not be stepped on
and the hose must not be pinched
between the drain and the machine.
• If the length of the hose is too short,
use it by adding an original extension
hose. Length of the hose may not
be longer than 3.2 m. To avoid water
leak failures, the connection between
the extension hose and the drain
hose of the product must be fitted
well with an appropriate clamp as not
to come off and leak.
Adjusting the feet
1. Loosen the lock nuts on the feet by
hand.
2. Adjust the feet until the product
stands level and balanced.
3. Tighten all lock nuts again by hand.
not use any tools to loosen the
ADo
lock nuts. Otherwise, they will get
damaged.
Raising the appliance
In order to raise the appliance to eliminate
the gap below the worktop, you will need
to order special optional kit.
Please call Beko Spare Part Department.
(0845 6004911) and see built-in
installation section.
Gap
order to ensure that the product
AInoperates
more silent and vibration-
free, it must stand level and balanced
on its feet. Balance the machine by
adjusting the feet. Otherwise, the
product may move from its place
and cause crushing and vibration
problems.
10
Without optional
raising feet.
EN
With optional raising
feet. Minimum
height=55 mm, max
height=65mm
Service Ref. No. 1493
Electrical connection
Connect the product to a grounded outlet
protected by a fuse complying with the
values in the "Technical specifications"
table. Our company shall not be liable
for any damages that will arise when the
product is used without grounding in
accordance with the local regulations.
• Connection must comply with
national regulations.
• Power cable plug must be within easy
reach after installation.
• The voltage and allowed fuse or
breaker protection are specified in
the “Technical specifications” section.
If the current value of the fuse or
breaker in the house is less than 13
Amps, have a qualified electrician
install a 13 Amp fuse.
• The specified voltage must be equal
to your mains voltage.
• Do not make connections via
extension cables or multi-plugs.
Damaged power cables must be
replaced by the Authorized Service
Agents.
Electrical requirements
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
We recommend that this appliance be
connected to the mains supply via a
suitable switched and fused socket in a
readily accessible position.
Should the mains lead of the appliance
become damaged or need replacing at
any time, it must be replaced by a special
purpose made mains lead which can only
be obtained from a Authorised Service
Agent.
B
need to be replaced an ASTA approved
BS1362 fuse of the same rating must
be used. Do not forget to refit the fuse
cover. In the event of losing the fuse
cover, the plug must not be used until a
replacement fuse cover has been fitted.
Colour of the replacement fuse cover
must be the same colour as that visible
on the pin face of the plug. Fuse covers
are available from any good electrical
store.
Important
Fitting a different plug
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying
the terminals on your plug, proceed as
follows:
1 Connect the green - yellow or green
(earth) wire to the terminal in the plug
marked ‘E’ or with the symbol f or
coloured green and yellow or green.
2 Connect the blue (neutral) wire to the
terminal in the plug marked ‘N’ or
coloured black.
3 Connect the brown (live) wire to the
terminal in the plug marked ‘L’ or
coloured red.
With the alternative plugs a 13A fuse must
be fitted either in the plug or adaptor or in the
main fuse box. If in doubt contact a qualified
electrician.
BThis appliance must be earthed
If the fitted moulded plug is not suitable
for your socket, then the plug should be
cut off and an appropriate plug fitted.
Destroy the old plug, which is cut off as
a plug with a bared cord could cause a
shock hazard if inserted into a socket
elsewhere in the house.
The moulded plug on this appliance
incorporates a 13A fuse. Should the fuse
11
EN
First use
Before starting to use the product, make
sure that all preparations are made in
accordance with the instructions in
sections "Important safety instructions"
and "Installation".
To prepare the product for washing
laundry, perform first operation in
Drum Cleaning programme. If your
machine is not featured with Drum
Cleaning programme, use Cottons-90
programme and select Additional Water
or Extra Rinse auxiliary functions as
well. Before starting the programme,
put max. 100 g of powder antilimescale into the main wash detergent
compartment (compartment nr. II). If
the anti-limescale is in tablet form, put
only one tablet into compartment nr. II.
Dry the inside of the bellow with a clean
piece of cloth after the programme has
come to an end.
Transportation of the product
1. Unplug the product before
transporting it.
2. Remove water drain and water
supply connections.
3. Drain the remaining water in the
product completely; see, "Draining
remaining water and cleaning the
pump filter".
4. Install transportation safety bolts
in the reverse order of removal
procedure; see, "Removing the
transportation locks".
Never move the product without the
transportation safety bolts properly
fixed in place!
C
Disposing of the old product
Dispose of the old product in an
environmentally friendly manner.
Refer to your local dealer or solid waste
collection centre in your area to learn
how to dispose of your product.
For children's safety, cut the power
cable and break the locking mechanism
of the loading door so that it will be
nonfunctional before disposing of the
product.
an anti-limescale suitable for
CUse
the washing machines.
water might have remained
CSome
in the product due to the quality
control processes in the production.
It is not harmful for the product.
Disposing of packaging
material
Packaging materials are dangerous to
children. Keep packaging materials in
a safe place away from reach of the
children.
Packaging materials of the product are
manufactured from recyclable materials.
Dispose of them properly and sort
in accordance with recycled waste
instructions. Do not dispose of them
with normal domestic waste.
12
EN
4 Preparation
Things to be done for
energy saving
Following information will help you use
the product in an ecological and energyefficient manner.
• Operate the product in the highest
capacity allowed by the programme
you have selected, but do not
overload; see, "Programme and
consumption table".
• Always follow the instructions on the
detergent packaging.
• Wash slightly soiled laundry at low
temperatures.
• Use faster programmes for small
quantities of lightly soiled laundry.
• Do not use prewash and high
temperatures for laundry that is not
heavily soiled or stained.
• If you plan to dry your laundry in a
dryer, select the highest spin speed
recommended during washing
process.
• Do not use detergent in excess of
the amount recommended on the
detergent package.
Sorting the laundry
• Sort laundry according to type of
fabric, colour, and degree of soiling
and allowable water temperature.
• Always obey the instructions given on
the garment tags.
Washing water
temperature
Wash with sensitive,
.short programmes
Bleach can be
used
Do not use bleach
Suitable for drier
Do not dry with drier
Hang without
spinning
Can be ironed with
hot iron
Non machine-washable
Do not wash
Dry-cleanable
Do not dry-clean
Dry horizontally
Dry on a hanger
Can be ironed
with warm iron
Do not iron
Preparing laundry for washing
• Laundry items with metal
attachments such as, underwired
bras, belt buckles or metal buttons
will damage the machine. Remove
the metal pieces or wash the clothes
by putting them in a laundry bag or
pillow case.
13
EN
Correct load capacity
The maximum load capacity depends on
the type of laundry, the degree of soiling
and the washing programme desired.
The machine automatically adjusts the
amount of water according to the weight
of the loaded laundry.
Follow the information in the
“Programme and consumption
table”. When overloaded, machine's
washing performance will drop.
Moreover, noise and vibration
problems may occur.
Laundry types and their average weights
in the following table are given as
examples.
A
• Take out all substances in the
pockets such as coins, pens and
paper clips, and turn pockets inside
out and brush. Such objects may
damage the product or cause noise
problem.
• Put small size clothes such as infant's
socks and nylon stockings in a
laundry bag or pillow case.
• Place curtains in without compressing
them. Remove curtain attachment
items.
• Fasten zippers, sew loose buttons
and mend rips and tears.
• Wash “machine washable” or “hand
washable” labeled products only with
an appropriate programme.
• Do not wash colours and whites
together. New, dark coloured cottons
release a lot of dye. Wash them
separately.
• Tough stains must be treated properly
before washing. If unsure, check with
a dry cleaner.
• Use only dyes/colour changers
and limescale removers suitable for
machine wash. Always follow the
instructions on the package.
• Wash trousers and delicate laundry
turned inside out.
• Keep laundry items made of Angora
wool in the freezer for a few hours
before washing. This will reduce
pilling.
• Laundry that are subjected to
materials such as flour, lime dust,
milk powder, etc. intensely must be
shaken off before placing into the
machine. Such dusts and powders
on the laundry may build up on the
inner parts of the machine in time and
can cause damage.
14
Laundry type
Bathrobe
Napkin
Duvet cover
Bed Sheet
Pillowcase
Tablecloth
Towel
Hand towel
Evening gown
Underclothing
Men’s overalls
Men’s shirt
Men’s pajamas
Blouses
Weight (g)
1200
100
700
500
200
250
200
100
200
100
600
200
500
100
Loading the laundry
• Open the loading door.
• Place laundry items loosely into the
machine.
• Push the loading door to close until
you hear a locking sound. Ensure that
no items are caught in the door.
The loading door is locked while a
programme is running. The door
can only be opened a while after the
programme comes to an end.
In case of misplacing the laundry,
noise and vibration problems may
occur in the machine.
C
A
EN
Detergents and softeners
Detergent Drawer
Detergent drawer of your washing
machine consists of four different
compartments for powder main wash
detergent, liquid main wash detergent,
liquid softener and powder pre-wash
detergent. Each of these laundry
additives are dispensed automatically
in the relevant time during the washing
Programme.
2
1
Do not place the laundry additives directly
into the drum. Always use the detergent
drawer.
Do not close the drawer too fast after
putting the laundry additives. This may
cause the additives be dispensed early,
creating unsatisfactory washing results
and fabric damage.
not open the drawer during
CDo
washing Programme.
3
4
(II) Main Wash Compartment
Before starting the washing Programme,
put powder detergent into the left
compartment with number “II”. Use the
detergent manufacturer’s measuring
cup and follow the instructions on the
package. Powder bleach/stain remover
must also be put into this compartment.
Put the liquid detergent into the main
wash compartment with number “II ”
before starting the washing Programme.
Liquid stain remover must be put into this
compartment.
Put the suggested amount of liquid
detergent into the left compartment with
“II ” symbol and dilute it to the maximum
filling level line (max. II ) with warm
water.
Particularly the concentrated detergents
must be diluted with warm water;
otherwise, the siphon may get clogged in
time.
Do not fill the detergent above the
maximum filling level line; otherwise the
excess amount of detergent will reach
the laundry without water and may cause
stains on the garments.In this case you
will need to refill the compartment. Do
not pour the detergent onto the laundry
directly since this may cause stains on
the garments.
Liquid Softener Compartment
Put the suggested amount of liquid
softener into the right compartment
with “ ” symbol and dilute it to the
maximum filling level line (max. )
with warm water.
The detergent drawer compartments
are indicated below:
1) Left compartment with number “II”
(Main wash compartment for powder
detergent or powder bleach/stain
remover)
2) Left compartment with number “II
” (Main wash compartment for liquid
detergent or liquid stain remover)
3) Middle compartment with number “I”
(pre-wash compartment for powder
detergent, powder stain remover or
liquid bleach - liquid bleach must be
added either during the pre-wash
or during the first rinsing step of the
washing Programme). Liquid bleach
must be added manually while the
machine takes in water.
4) Right compartment with “ ” symbol
(liquid softener compartment)
15
EN
Particularly the concentrated softeners
must be diluted with warm water;
otherwise, the siphon may get clogged in
time.
Do not fill the softener above the
maximum filling level line; otherwise the
excess amount of softener will get mixed
with the washing water and you will need
to refill the compartment. Do not pour the
softener onto the laundry directly since
this may cause stains on the garments.
Liquid softener will be dispensed
automatically at the final rinsing step of
the washing Programme.
(I) Pre-Wash Compartment
Put the powder pre-wash detergent or
powder stain remover into the middle
compartment with number “I”.
You can also put liquid bleach into this
compartment while the machine takes
in water during pre-wash or first rinsing
step. Adding the liquid bleach while
the machine takes in water allows it to
be diluted before it is poured onto the
laundry.
You must select extra rinsing option
if you use liquid bleach in a washing
Programme. Bleach must be removed
from the laundry with rinsing; otherwise it
may cause itching on the skin.
Read the dosage instructions and
label of your garments carefully before
using the liquid bleach.
Starch
• Add liquid starch, powder starch
or the dyestuff into the softener
compartment as instructed on the
package.
• Never use fabric softener and starch
together in the same washing cycle.
• Wipe the inside of the drum after
using starch.
Bleaches
If you are going to use regular bleach in
your machine, it is suggested to select
a Programme with pre-wash step and
add the bleach at the beginning of the
pre-wash without putting detergent into
the pre-wash compartment. Alternatively,
it is suggested to select a Programme
with extra rinsing and add the bleach
while the machine takes in water from
the detergent drawer in the first rinsing
step. Bleach should not be mixed with
detergent. Since the bleach may cause
irritation on skin, little amounts must be
used and rinsed thoroughly. Do not pour
bleach directly onto the laundry and do
not use it with colour laundry.
When using oxygen based bleach, follow
the instructions on the package and
select a Programme at low temperature.
Oxygen based bleach can be used
together with the detergent. However, if
it is not at the same thickness with the
detergent, then it must be added from
the compartment number “II” right after
the detergent foams with water.
Eliminating lime formation
• When required, use only appropriate
lime removers developed specifically
for washing machines and always
follow the instructions on the
package.
C
16
EN
Tips for efficient washing
Clothes
Light colours and
whites
Colors
Dark colors
Delicates/
Woolens/Silks
(Recommended
temperature range
based on soiling level:
cold-40C)
(Recommended
temperature
range based
on soiling level:
cold-40C)
(Recommended
temperature
range based
on soiling level:
cold-30C)
Powder and
liquid detergents
recommended for
colours can be
used at dosages
recommended for
heavily soiled clothes.
It is recommended
to use powder
detergents to clean
clay and soil stains
and the stains that are
sensitive to bleaches.
Use detergents
without bleach.
Liquid
detergents
suitable for
colours and dark
colours can be
used at dosages
recommended
for heavily soiled
clothes.
Prefer liquid
detergents
produced for
delicate clothes.
Woollen and silk
clothes must
be washed with
special woollen
detergents.
Powder and
liquid detergents
recommended
for whites can be
used at dosages
recommended for
normally soiled
clothes.
Powder and
liquid detergents
recommended for
colours can be
used at dosages
recommended for
normally soiled
clothes. Use
detergents without
bleach.
Liquid
detergents
suitable for
colours and dark
colours can be
used at dosages
recommended
for normally
soiled clothes.
Prefer liquid
detergents
produced for
delicate clothes.
Woollen and silk
clothes must
be washed with
special woollen
detergents.
Powder and
liquid detergents
recommended
for whites can be
used at dosages
recommended for
lightly soiled clothes.
Powder and
liquid detergents
recommended for
colours can be
used at dosages
recommended for
lightly soiled clothes.
Use detergents
without bleach.
Liquid
detergents
suitable for
colours and dark
colours can be
used at dosages
recommended
for lightly soiled
clothes.
Prefer liquid
detergents
produced for
delicate clothes.
Woollen and silk
clothes must
be washed with
special woollen
detergents.
Soiling Level
(Recommended
temperature range
based on soiling
level: 40-90C)
It may be
necessary to pretreat the stains of
perform prewash.
Powder and
liquid detergents
recommended
Heavily Soiled for whites can be
used at dosages
(difficult stains recommended
such as grass, for heavily soiled
coffee, fruits
clothes. It is
and blood.)
recommended
to use powder
detergents to clean
clay and soil stains
and the stains that
are sensitive to
bleaches.
Normally
Soiled
(For example,
stains caused
by body on
collars and
cuffs)
Lightly Soiled
(No visible
stains exist.)
17
EN
5 Selecting a Program and Operating Your Machine
Control panel
1
6
1
2
3
4
5
6
7
8
-
-
-
-
-
-
-
-
2
7
3
4
8
Spin Speed Adjustment Button
Display
Temperature Adjustment Button
Program Selection Knob
On/Off Button
Time Delaying Button (+/-)
Auxiliary Function Buttons
Start/Pause/Cancel Button
18
EN
5
Display symbols
a
b
c d e
f
Each of these main programs comprise
of a complete washing process, including
washing, rinsing and, if required, spin
cycles.
When selecting the program you are
going to use, always consider type of
fabric, colour, degree of soiling and
permissible water temperature.
Always select the lowest required
temperature. Higher temperature
means higher power consumption.
For further program details, see
“Program Selection Table”
• Cottons
You can wash your durable clothes with
this program. Your laundry will be washed
with vigorous washing movements
during a longer washing cycle. It is
recommended for your cotton items (such
as bed sheets, duvet and pillowcase sets,
bathrobes, underclothing, etc.).
• Synthetics
You can wash your less durable clothes
on this program. Gentler washing
movements and a shorter washing cycle
is used compared to the “Cottons”
program. It is recommended for your
synthetic clothes (such as shirts,
blouses, synthetic/cotton blended
garments, etc.). For curtains and lace, the
“Synthetic 40” program with pre-wash
and anti-creasing functions selected is
recommended. Detergent should not
be put in the pre-wash compartment.
Less detergent should be put in the main
wash compartment as loose knit fabrics
(lace) foam too much due to its meshed
structure.
• Woollens
You can wash your machine-washable
woollen garments on this program. Wash
by selecting the proper temperature
according to the labels of your clothes.
It is recommended to use appropriate
detergents for woollens.
A
m
g
F1
l k
F3
F2
F4
A
h
i
C
j
a - Spin Symbol
b - Spin Speed Indicator
c – Water cut-off symbol (According to
your machine’s model)
d - Economy Symbol
e - Temperature Indicator
f - Temperature Symbol
g - Door Locked Symbol
h - Standby Symbol
i - Start Symbol
j - Auxiliary Function Symbols
k - Remaining Time and Delaying Time
Indicator
l - Program Indicator Symbols (prewash/main wash/rinse/softener/spin)
m - Time Delaying Symbol
Turning the machine on
Plug in your machine. Turn the tap on
completely. Check if the hoses are
connected tightly. Place the laundry in
the machine. Add detergent and softener.
Press the “On/Off” button.
Program selection
Select the appropriate program from the
program table according to type, amount
and degree of soiling of the laundry and
washing temperatures.
Turn the Programme Selection Knob to
the program mode that you wish to wash
your laundry.
The recommended temperature and spin
speed for the selected program appear.
Press “Start/Pause/Cancel” button to
start the program.
Main programs
Depending on the type of textile, the
following main programs are available:
Additional programs
For special cases, there are also extra
programs available:
Additional programs may differ
according to the model of your
machine.
C
19
EN
• Cottons Eco
You may wash your normally soiled
durable cotton and linen laundry in this
programme with the highest energy and
water saving compared to all other wash
programmes suitable for cottons. Actual
water temperature may differ from the
declared cycle temperature. Programme
duration may automatically be shortened
during later stages of the programme if
you wash less amount (e.g. ½ capacity
or less) of laundry. In this case energy
and water consumption will be further
decreased giving you the opportunity for
a more economical wash. This feature
is available for certain models having
remaining time display.
• Baby+Toddler Clothing
Increased hygiene is provided by a longer
heating period and an additional rinse
cycle. It is recommended for baby clothes
and clothes worn by allergic people.
• Hand wash
You can wash your woollen/delicate
clothes that bear “not machinewashable” labels for which hand wash is
recommended on this program. It washes
the laundry with very tender washing
movements without damaging your
clothes.
• Daily Quick
This program is used to wash lightly
soiled and unstained cotton garments in
a short time.
• Xpress Super Short
You can use this program to quickly
wash a small number of lightly soiled
and unstained cotton garments. E.g.:
bathrobes, duvet covers, sport wear, daily
clothes and etc. used only once.
• Shirts
You can use this program to wash the
shirts made of cotton, synthetic and
synthetic blended fabrics.
• Darkcare
This programme can be used to wash
dark coloured laundry which you want
to prevent from getting faded. We
recommend you use liquid detergent or
woollen shampoo with this programme.
• Mixed Fabrics
You can use this program to wash
cottons and synthetics together. There is
no need to sort them.
Special programs
20
• Freshen Up
You can use this programme to refresh
or remove odours from clothes that have
been used only once and do not have
any stains on.
• Eco Clean 20
You can use this program, which is more
sensitive to environment and natural
resources, to wash lightly soiled and
unspotted cotton laundry (max 3.5 kg)
in a short time and economical way. It is
suggested to use liquid or gel washing
detergents.
• Self Clean(Drum cleaning)
It is suggested to run this program
with certain intervals (e.g. once in 1 or
2 months) for the self-cleaning of your
machine. This program must certainly be
run without any laundry in the machine.
Make sure that the machine is empty
before starting the program. For more
effective cleaning, you can run the
program by adding powder lime remover
for washing machines into compartment
II of the detergent drawer. After the
program is completed, leave the door ajar
to allow the inside of the machine get dry.
This is not a program for washing
laundry. This is a maintenance
program for the machine.
Never use this program if there is
something in your machine.
When this feature is started your
machine senses the load inside of it
automatically, if any, and interrupts
the program.
C
C
C
For specific applications, select any of the
following programs:
• Rinse
This program is used when you want to
rinse or starch separately.
• Spin + Drain
This program spins with maximum
possible rpm in the default setting after
the water drains from the machine.
EN
Spin Speed selection
a lower spin speed for delicate
CUse
laundry.
Temperature selection
Whenever a new program is selected, the
temperature anticipated for that program
appears on the temperature indicator .
To change the temperature, press
the temperature button. Temperature
decreases in 10° increments.
Cold selection is shown with “-” symbol.
Whenever a new program is selected,
the maximum spin speed of the selected
program is displayed on the spin speed
indicator.
To decrease the spin speed, press the
“Spin” button. Spin speed decreases
gradually. Then, rinse hold and no spin
options are shown respectively.
Rinse hold is shown with “ ” and no
spin is shown with “ ” symbols.
F1
60˚C
40˚C
30˚C
Cold
F3
F4
If you are not going to unload your
clothes immediately after the cycle, you
may use rinse hold function in order to
prevent your clothes becoming creased
when there is no water in the machine.
With this function, your laundry is kept in
the final rinsing water. If you want to spin
your laundry after the rinse hold function:
- Adjust the spin speed.
- Press “Start/Pause/Cancel” button.
Program resumes. Your machine
drains the water and spins your
laundry.
You can use no spin function in order to
drain the water without spinning at the
end of the program.
When the “Temperature” button is
pressed after Cold is selected, the
maximum temperature of the program
you have selected will be displayed.
To decrease the temperature, press the
“Temperature” button again.
90˚C
F2
Normally soiled, white cottons
and linens. (Ex.: coffee table
covers, tablecloths, towels, bed
sheets)
Normally soiled, fade proof
coloured linens, cottons or
synthetic clothes (Ex.: shirts,
nightgowns, pyjamas) and
lightly soiled white linen clothes
(Ex.: underwear)
Blended clothes including
synthetics and woollens as well
as delicates.
Economy Symbol
Shows energy saving programs and
temperature selections.
As “Intensive” and “Hygiene” programs
are long programs with higher
temperature selections to ensure hygiene,
“Economy” Symbol will not light up.
21
EN
Program and consumption table
Energy Consumption (kWh)
Max. Speed***
Prewash
Quicker Wash
Extra Rinse
Anti- Crease
Rinse Hold
Pet hair removal
Auxiliary functions
Water Consumption (l)
2
Max. Load (kg)
EN
Cottons
90
7
74
2.30
1600
•
•
•
•
•
•
90-Cold
Cottons
60
7
72
1.50
1600
•
•
•
•
•
•
90-Cold
Cottons
40
7
72
0.85
1600
•
•
•
•
•
•
90-Cold
Baby&Toddler Clothing
90
7
66
2.70
1600
Cottons Eco
60**
7
44
1.10
Cottons Eco
60**
3.5
38
Cottons Eco
40**
3.5
Cottons Eco
40
Synthetics
Programme (°C)
•
90-30
1600
•
60-Cold
0.88
1600
•
60-Cold
38
0.70
1600
•
60-Cold
7
64
0.72
1600
•
60-Cold
60
3
45
1.00
1200
•
•
•
•
•
•
60-Cold
Synthetics
40
3
45
0.45
1200
•
•
•
•
•
•
60-Cold
Eco clean 20
20
3.5
39
0.16
1600
Mixed Fabrics
40
3.5
45
0.55
1200
•
•
•
•
•
Shirts
40
3.5
45
0.55
800
•
•
•
*
•
60-Cold
Xpress Super Short
30
2
35
0.10
1400
•
•
30-Cold
Daily Quick
90
7
60
2.00
1400
•
•
90-Cold
Daily Quick
60
7
60
1.15
1400
•
•
90-Cold
Daily Quick
30
7
70
0.20
1400
•
•
90-Cold
Woollens
40
1.5
56
0.30
1200
•
•
40-Cold
Hand Wash
30
1
40
0.25
1200
Dark Care
40
3
82
0.55
1200
*
Self Clean
70
-
100
1.70
800
*
Freshen up
-
2
20
0.03
1200
22
EN
*
Selectable
temperature
range °C
•
20
•
40-Cold
30-Cold
•
40-Cold
70
•
-
• : Selectable
* : Automatically selected, not cancellable.
** : Energy Label programme (EN 60456 Ed.3)
*** If maximum spin speed of your machine is lower, selection may be made until
maximum spin speed.
- : See program description for maximum load.
auxiliary functions in the table vary according to the model of your machine.
CThe
Water
power consumption and program duration differ from the table
C subjectand
to changes in water pressure, water hardness and temperature, ambient
temperature, type and amount of laundry, selection of auxiliary functions, and
changes in supply voltage.
Program duration will be displayed on the screen of your machine according to
your selection.
C
23
EN
Auxiliary functions
Auxiliary Function Selection Buttons
a
b
c
d
• Depending on the program, you can
select the desired auxiliary function by
pressing the buttons a, b, c,d.
• Select the required auxiliary functions
before starting the program.
• Some combinations cannot be
selected together. Ex.: Pre-wash and
Quick Wash.
• Symbol of the selected auxiliary
function will light up.
Auxiliary function selection
If an auxiliary function that should not
be selected together with a previously
selected function is chosen, the first
selected function will be cancelled and
the last auxiliary function selection will
remain active.
Ex.: If you want to select pre-wash first
and then quick wash, pre-wash will be
cancelled and quick wash will remain
active.
Auxiliary function that is not compatible
with the program cannot be selected.
(see, “Program Selection Table”)
• Prewash
When you select this function (a), the
display will indicate “F1” symbol.
• A pre-wash is only worthwhile for
heavily soiled laundry. Without
pre-wash you save energy, water,
detergent and time.
• Pre-wash without detergent is
recommended for lace and curtains.
• Quicker Wash
With this function (b), the wash time is
shortened. “F2” symbol lights up on the
display.
24
• Use this function for smaller amounts
or slightly soiled laundry.
• Extra Rinse
When this function (c) is selected,
washing and rinsing is performed with
plenty of water. “F3” symbol lights up on
the display.
• Anti-Crease
With this function (d), drum movement
will be lessened to prevent creasing and
spinning speed is limited. In addition,
washing is carried out at a higher water
level. “F4” symbol lights up on the display.
• Use this function for delicate laundry
that crease easily.
Whenever you select this auxiliary
function, load your machine with half
of the maximum laundry specified in
the program table.
• Rinse Hold
If you are not going to unload your
clothes immediately after the program
completes, you may use rinse hold
function and keep your laundry in the
final rinsing water in order to prevent
them become creased when there is no
water in the machine. Press “Start/Pause”
button after this process if you want to
drain the water without spinning. Program
resumes. Your machine drains the water
and program completes.
If you want to spin your laundry that you
left in water:
- Adjust the spin speed.
- Press Start/Pause button
Program resumes. Your machine drains
the water, spins the laundry and program
completes.
C
Time display
The display shows the time remaining for
the program to complete while a program
is running. Time is displayed in hours and
minutes as “01:30”.
EN
Time delay
With the “Time delay” function you can
delay the program start up to 24 hours.
Setting can be made in intervals of 30
minutes.
1. Open the loading door, place the
laundry inside and fill detergent
drawer.
2. Set the washing program,
temperature, spin speed and, if
required, select the auxiliary functions.
3. Press “Time delaying” buttons “+”
and “-” to set your desired time delay.
The Time delaying symbol will flash.
4. Press “Start/Pause/Cancel” button.
Then the time delay starts to count
down. The Time delaying symbol will
light up. The Start symbol will light up.
The “:” in the middle of the displayed
time delay will start to flash.
More laundry may be loaded or taken
out during the time delay period. At
the end of the time delay countdown
process, time delaying symbol
fades and the washing starts as the
program duration is displayed.
•
Changing the delay time
If you want to change the time during the
countdown:
1. Press “Start/Pause/Cancel” button. “
: “ in the middle of the screen will stop
flashing. The Standby symbol will light
up. The Time delaying symbol will
flash. The Start Symbol will fade.
2. Press “Time delaying” buttons “+” or
“-” to set your desired time delay.
3. Press “Start/Pause/Cancel” button.
The Time delaying symbol will light
up. The Standby symbol will fade.
The Start symbol will light up.
4. The “:” in the middle of the displayed
time delay will start to flash.
Cancelling the time delay
If you want to cancel the time delay
countdown and start the program
immediately:
1. Press “Start/Pause/Cancel” button.
The “:” in the middle of the displayed
time delay will stop flashing.
25
2. Start symbol will fade. The standby
symbol and the time delaying symbol
will flash.
3. Press time delaying button “-” to
decrease the desired time delay.
Program duration after 30 minutes
shall be displayed.
4. Press Start/Pause/Cancel Button to
start the program.
Starting the Program
1. Press Start/Pause/Cancel button to
start the program.
2. The start symbol which indicates that
the program has started will light up.
3. The door locks and the door locked
symbol will light up.
4. The Symbol of the relevant step
(prewash, main wash, rinse, softener
and spin) that the program has
started from will light up.
Progress of program
The progress of a running program is
shown through a number of symbols on
the screen.
At the beginning of each program
step, the relevant symbol in the series
of symbols will light up and thus, at
the end of the program, all symbols
will remain lit up. The symbol that
lights up at the far right of the series
of symbols indicates the step that is
being carried out.
• Pre-wash
When “prewash” auxiliary function is
selected, prewash symbol will light up to
indicate the beginning of prewash step.
Main wash
Main wash symbol will light up to indicate
that the main wash cycle has started.
Rinse
Rinse symbol lights up at the beginning of
the rinse step.
Softener
Softener symbol lights up at the
beginning of softener step.
Spin
Spin symbol will light up at the beginning
of the final spin, during “Spin” and
“Pump” special programs.
EN
•
If the machine is not spinning, the
program may be in rinse hold mode
or the automatic spin correction
system has been activated due to an
excessive unbalanced distribution of
laundry in the machine.
Changing the selections after
the program has started
The selected spin speed and program
temperature fade out. An empty frame
appears.
When the “Program selection” button is
brought to the appropriate position, rpm
and temperature data reappear.
Switching the machine
to standby mode
The machine is switched to standby
mode by pressing “Start/Pause/Cancel”
button momentarily. The Standby symbol
which indicates the machine is in standby
mode lights up and the start symbol that
shows the program has started and is still
continuing fades out.
F1
F2
F3
F4
Selecting or cancelling an auxiliary
function in pause mode
Auxiliary functions can be cancelled or
selected in accordance with the step the
program is at.
Adding/removing laundry in pause
mode
The door can be opened if the water
level is suitable. The door locked symbol
will light up until the door is suitable for
opening. This symbol will fade out as
soon as the door is allowed to open.
Laundry may be added / taken out by
opening the door.
26
Door lock
The Door Locked Symbol lights up when
the loading door is locked. This symbol
will flash until the door is allowed to open.
Do not force the door at this stage. This
symbol will fade out as soon as the door
is allowed to open. You may open the
door after the symbol fades out.
Child-proof lock
Protect the appliance from being
tampered by children by means of the
child-proof lock. In this case, no change
can be made in the running program.
Your machine can be turned on and
off with On/Off button while the childproof lock is activated. In this case,
your machine will resume its program
with child-proof lock activated.
The machine is switched to child-lock
by pressing the 2nd and 4th auxiliary
functions for 3 sec. “C:on” (Child-proof
lock is activated) label appears on the
display.
C
The same symbol will also be displayed
whenever any button is pressed while the
machine is child-locked.
To deactivate the child-proof lock, press
the 2nd and 4th auxiliary function buttons
for 3 sec.
“C:OFF” (Child-proof lock is deactivated)
label appears on the screen.
Ending the program
through cancelling
“Start/Pause/Cancel” button is pressed
for 3 seconds to cancel the program.
Start symbol will flash during cancellation.
After cancellation, the symbol of the
EN
corresponding step at which the
cancellation was made will remain lit and
“End” will appear on the screen.
Program in rinse hold mode
•
This process is shown with the
flashing Spin Symbol and the lit up
Standby Symbol.
If you wish to spin when the machine is
in this mode:
Adjust the spin speed. Press “Start/
Pause/Cancel” button. The program
continues, pumps out the water and
spins. The Standby Symbol fades out
and Start Symbol lights up.
If you want to discharge the water only
without spinning:
Press “Start/Pause/Cancel” button.
The Standby symbol will fade. The
Start symbol will light up. The program
continues and only drains the water.
End of program
When the program is finished, the
symbols of the relevant steps will remain
lit up and the auxiliary function, spin and
temperature data selected at the startup of the program will remain selected.
“End” will appear on the display.
27
EN
6 Maintenance and cleaning
Detergent Drawer
Remove any powder residue buildup in the
drawer. To do this;
2
1
•
3
4
Open the hole in the bellow with the
aid of a toothpick if it is clogged.
metal substances in your
CForeign
machine can cause rust stains. In
1. You can remove the detergent drawer
by pulling it towards yourself strongly.
more than a normal amount of
CIfsoftener
and liquid detergent mixture
starts to remain in the softener
compartment, the siphon must be
cleaned.
2. Wash the drawer and the siphon
with plenty of lukewarm water in a
washbasin. Wear protective gloves
or use an appropriate brush to avoid
touching the residues in the drawer
when cleaning.
3. Replace the drawer into its housing
after cleaning. Check if the siphon is in
its original location.
Body and control panel
When necessary:
• Wipe the exterior panels of your
machine with soapy water or mild
detergent. Dry it with a soft cloth.
• Use only a soft and damp cloth to
clean the control panel.
Never
use a sponge or scrubbing
A material.
These will damage the
painted and plastic parts.
Inlet water filters
There is a filter at the end of each
water intake valve at the back side of
the machine and also at the end of
each water intake hose where they are
connected to the tap. These filters prevent
the foreign substances and dirt in the
water to enter into the machine. Filters
should be cleaned as they get dirty.
The loading door and the drum
After each wash:
• Check if there are any foreign
substances in the drum.
28
such cases:
Clean the drum with a stainless steel
cleaning agent. Never use steel wool
or wire wool.
EN
machine. the filter must be cleaned only
after the inside water is cooled down to
avoid hazard of scalding.
2- Open the filter cap. The filter cap may be
composed of one or two pieces according
to the model of your machine.
If it is composed of two pieces, press the
tab on the filter cap downwards and pull the
piece out towards yourself.
If your machine is built-in, then it does
C not
contain a filter cover.
•
•
•
•
•
Close the taps.
Remove the nuts of the water intake
hoses to clean the surfaces of the
filters on the water intake valves with an
appropriate brush.
If the filters are very dirty, you can pull
them out by means of pliers and clean
them.
Take out the filters on the flat ends of
the water intake hoses together with
the gaskets and clean thoroughly under
streaming water.
Replace the gaskets and filters carefully
to their places and tighten the hose
nuts by hand.
If it is composed of one piece, hold it from
both sides and open it by pulling out.
can remove the filter cover
CYou
by slightly pushing the kick plate
downwards with a screwdriver, through
the gap above the filter cover.
Draining any remaining water
and cleaning the pump filter
Filter system in your machine prevents solid
items such as buttons, coins and fabric
fibers clogging the pump propeller during
discharging of the washing water. Thus, a
good water discharger is achieved and the
pump life is extended.
• If your machine fails to drain the water,
the pump filter may be clogged. You
may have to clean it every 2 years or
whenever it is plugged. Water must be
drained off to clean the pump filter.
In addition, water may have to be drained
off completely in the following cases:
• before transporting the machine (e.g.
when moving house)
• when there is the danger of frost
In order to clean the dirty filter and
discharge the water;
1- Unplug the machine to cut off the supply
power.
AThere may be water at 90°C in the
3- An emergency drain hose is supplied
with some of our models. Others are not
supplied with this item.
If your product is supplied with an
emergency drain hose, do the following as
shown in the figure below:
• Pull out the pump outlet hose from its
housing.
29
EN
• Place a large container at the end of
the hose. Drain the water off into the
container by pulling out the plug at
the end of the hose. If the amount of
water to be drained off is greater than
the volume of the container, replace
the plug, pour the water out and then
resume the draining process.
• After draining process is completed,
replace the plug into the end of the
hose and fit the hose back into its
place.
into their positions and pushing the upper
part of it.
If your product is not supplied with an
emergency drain hose, do the following as
shown in the figure below:
• Place a large container in front of the
filter to receive water flowing from the
filter.
• Loosen pump filter (anticlockwise) until
water starts to flow out of it. Direct the
flowing water into the container you
have placed in front of the filter. You
can use a piece of cloth to absorb any
spilled water.
• When there is no water left, turn the
pump filter until it is completely loose
and remove it.
• Clean any residues inside the filter
as well as fibers, if any, around the
propeller region.
• If your product has a water jet feature,
be sure to fit the filter into its housing
in the pump. Never force the filter while
replacing it into its housing. Fit the filter
fully into its housing; otherwise, water
may leak from the filter cap.
4- Close the filter cap.
Close the two-piece filter cap of your
product by pushing the tab on it.
Close the one-piece filter cap of your
product by fitting the tabs on the bottom
30
EN
7 Troubleshooting
Programme cannot be started or selected.
• Washing machine has switched to self protection mode due to a supply problem
(line voltage, water pressure, etc.). >>> Press and hold Start / Pause / Cancel
button for 3 seconds to reset the machine to factory settings. (See "Canceling the
programme")
Water in the machine.
• Some water might have remained in the product due to the quality control
processes in the production. >>> This is not a failure; water is not harmful to the
machine.
There is water leaking from the bottom of the washing machine.
• Likely problems with hoses or the pump filter. >>> Be sure the seals of the water
inlet hoses are securely fitted. Attach the hose to the tap tightly.
• Pump filter might not be closed fully. >>> Make sure that the pump filter is
completely closed.
Machine does not fill with water.
• Tap is turned off. >>> Open the inlet water taps fully.
• Water inlet hose is bent. >>> Flatten the water inlet hose.
• Water inlet filter is clogged. >>> Clean the water inlet filter.
• The loading door is ajar. >>> Close the Loading Door.
Machine does not drain water.
• Water drain hose might be clogged or twisted. >>> Clean or flatten the hose.
• Pump filter is clogged. >>> Clean the pump filter.
Machine vibrates or makes noise.
• Machine might be standing unbalanced. >>> Adjust the feet to level the machine.
• A hard substance might have entered into the pump filter. >>> Clean the pump
filter.
• Transportation safety bolts are not removed. >>> Remove the transportation
safety bolts.
• Laundry quantity in the machine might be too little. >>> Add more laundry to the
machine.
• Machine might be overloaded with laundry. >>> Take out some of the laundry
from the machine or distribute the load by hand to balance it homogenously in the
machine.
• Machine might be leaning on a rigid item. >>> Make sure that the machine is not
leaning on anything.
Machine stopped shortly after the programme started.
• Machine might have stopped temporarily due to low voltage. >>> It will resume
running when the voltage restores to the normal level.
Machine directly discharges the water it takes in.
• Draining hose might not be at adequate height. >>> Connect the water draining
hose as described in the operation manual.
No water can be seen in the machine during washing.
water level is not visible from outside of the washing machine. This is not a
CThe
failure.
31
EN
Loading door cannot be opened.
• Door lock is activated because of the water level in the machine. >>> Drain the
water by running the Pump or Spin programme.
• Machine is heating up the water or it is at the spinning cycle. >>> Wait until the
programme completes.
• Child lock is engaged. Door lock will be deactivated a couple of minutes after
the programme has come to an end. >>> Wait for a couple of minutes for
deactivation of the door lock.
Washing takes longer time than the one specified in the manual.
• Water pressure is low. >>> Machine waits until taking in adequate amount of
water to prevent poor washing quality due to the decreased amount of water.
Therefore, the washing time extends.
• Voltage might be low. >>> Washing time is prolonged to avoid poor washing
results when the supply voltage is low.
• Input temperature of water might be low. >>> Required time to heat up the water
extends in cold seasons. Also, washing time can be lengthened to avoid poor
washing results.
• Number of rinses and/or amount of rinse water might have increased. >>>
Machine increases the amount of rinse water when good rinsing is needed and
adds an extra rinsing step if necessary.
• Excessive foam might have occurred and automatic foam absorption system
might have been activated due to too much detergent usage. >>> Use
recommended amount of detergent.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
Programme time does not countdown. (On models with display)
• Timer may stop during water intake. >>> Timer indicator will not countdown until
the machine takes in adequate amount of water. The machine will wait until there
is sufficient amount of water to avoid poor washing results due to lack of water.
Timer indicator will resume countdown after this.
• Timer may stop during heating step. >>> Timer indicator will not countdown until
the machine reaches the selected temperature.
• Timer may stop during spinning step. >>> Automatic unbalanced load detection
system might be activated due to the unbalanced distribution of the laundry in the
drum.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
Programme time does not countdown.
• There might be an imbalance of laundry in the machine. >>> Automatic
unbalanced load detection system might be activated due to the unbalanced
distribution of the laundry in the drum.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
C
C
C
32
EN
Machine does not switch to spinning step.
• There might be an imbalance of laundry in the machine. >>> Automatic
unbalanced load detection system might be activated due to the unbalanced
distribution of the laundry in the drum.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
• The machine will not spin if water is not drained completely. >>> Check the filter
and the draining hose.
• Excessive foam might have occurred and automatic foam absorption system
might have been activated due to too much detergent usage. >>> Use
recommended amount of detergent.
Washing performance is poor: Laundry turns gray.
• Insufficient amount of detergent was used over a long period of time. >>> Use
the recommended amount of detergent appropriate for water hardness and the
laundry.
• Washing was made at low temperatures for a long time over a long period of time.
>>> Select the proper temperature for the laundry to be washed.
• Insufficient amount of detergent is used with hard waters. >>> Using insufficient
amount of detergent with hard water causes the soil to stick on the cloth and this
turns the cloth into gray in time. It is difficult to eliminate graying once it happens.
Use the recommended amount of detergent appropriate for water hardness and
the laundry.
• Too much detergent is used. >>> Use the recommended amount of detergent
appropriate for water hardness and the laundry.
• Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Washing performance is poor: Stains persist or the laundry is not whitened.
• Insufficient amount of detergent is used. >>> Use recommended amount of
detergent appropriate for the laundry.
• Excessive laundry was loaded in. >>> Do not load the machine in excess. Load
with amounts recommended in the "Programme and consumption table".
• Wrong programme and temperature were selected. >>> Select the proper
programme and temperature for the laundry to be washed.
• Wrong type of detergent is used. >>> Use original detergent appropriate for the
machine.
• Detergent is put in the wrong compartment. >>> Put the detergent in the correct
compartment. Do not mix the bleaching agent and the detergent with each other.
• Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Washing performance is poor: Oily stains appeared on the laundry.
• Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Washing performance is poor: Clothes smell unpleasantly.
• Odours and bacteria layers are formed on the drum as a result of continuous
washing at lower temperatures and/or in short programmes. >>> Leave the
detergent drawer as well as the loading door of the machine ajar after each
washing. Thus, a humid environment favorable for bacteria cannot occur in the
machine.
• Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
C
33
EN
Colour of the clothes faded.
• Excessive laundry was loaded in. >>> Do not load the machine in excess.
• Detergent in use is damp. >>> Keep detergents closed in an environment free of
humidity and do not expose them to excessive temperatures.
• A higher temperature is selected. >>> Select the proper programme and
temperature according to the type and soiling degree of the laundry.
• Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
It does not rinse well.
• The amount, brand and storage conditions of the detergent used are
inappropriate. >>> Use a detergent appropriate for the washing machine and
your laundry. Keep detergents closed in an environment free of humidity and do
not expose them to excessive temperatures.
• Detergent is put in the wrong compartment. >>> If detergent is put in the
prewash compartment although prewash cycle is not selected, machine can take
this detergent during rinsing or softener step. Put the detergent in the correct
compartment.
• Pump filter is clogged. >>> Check the filter.
• Drain hose is folded. >>> Check the drain hose.
Laundry became stiff after washing.
• Insufficient amount of detergent is used. >>> Using insufficient amount of
detergent for the water hardness can cause the laundry to become stiff in time.
Use appropriate amount of detergent according to the water hardness.
• Detergent is put in the wrong compartment. >>> If detergent is put in the
prewash compartment although prewash cycle is not selected, machine can take
this detergent during rinsing or softener step. Put the detergent in the correct
compartment.
• Detergent might be mixed with the softener. >>> Do not mix the softener with
detergent. Wash and clean the dispenser with hot water.
• Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Laundry does not smell like the softener.
• Detergent is put in the wrong compartment. >>> If detergent is put in the
prewash compartment although prewash cycle is not selected, machine can take
this detergent during rinsing or softener step. Wash and clean the dispenser with
hot water. Put the detergent in the correct compartment.
• Detergent might be mixed with the softener. >>> Do not mix the softener with
detergent. Wash and clean the dispenser with hot water.
• Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
34
EN
Detergent residue in the detergent drawer.
• Detergent is put in wet drawer. >>> Dry the detergent drawer before putting in
detergent.
• Detergent has gotten damp. >>> Keep detergents closed in an environment free
of humidity and do not expose them to excessive temperatures.
• Water pressure is low. >>> Check the water pressure.
• The detergent in the main wash compartment got wet while taking in the prewash
water. Holes of the detergent compartment are blocked. >>> Check the holes
and clean if they are clogged.
• There is a problem with the detergent drawer valves. >>> Call the Authorized
Service Agent.
• Detergent might be mixed with the softener. >>> Do not mix the softener with
detergent. Wash and clean the dispenser with hot water.
• Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
There is detergent left on the laundry.
• Excessive laundry was loaded in. >>> Do not load the machine in excess.
• Wrong programme and temperature were selected. >>> Select the proper
programme and temperature for the laundry to be washed.
• Wrong detergent was used. >>> Select the proper detergent for the laundry to be
washed.
• Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Too much foam forms in the machine.
• Improper detergents for the washing machine are being used. >>> Use
detergents appropriate for the washing machine.
• Excessive amount of detergent is used. >>> Use only sufficient amount of
detergent.
• Detergent was stored under improper conditions. >>> Store detergent in a closed
and dry location. Do not store in excessively hot places.
• Some meshed laundry such as tulle may foam too much because of their texture.
>>> Use smaller amounts of detergent for this type of item.
• Detergent is put in the wrong compartment. >>> Put the detergent in the correct
compartment.
• Softener is being taken early. >>> There may be problem in the valves or in the
detergent dispenser. Call the Authorized Service Agent.
• Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Foam is overflowing from the detergent drawer.
• Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and
pour into the main wash compartment of the detergent drawer.
Put detergent into the machine suitable for the programmes and maximum loads
indicated in the “Programme and consumption table”. When you use additional
chemicals (stain removers, bleaches and etc), reduce the amount of detergent.
C
35
EN
Laundry remains wet at the end of the programme
• Excessive foam might have occurred and automatic foam absorption system might
have been activated due to too much detergent usage. >>> Use recommended
amount of detergent.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
Machine does work. Nothing is displayed on the screen.
The plug might not be plugged in the
mains outlet.
Check the plug.
Fuse may have blown.
Check the fuse.
Electricity may be cut off.
Check the supply power.
The “On/Off” button might have not Press this button.
been pressed.
The machine did not start after the program was selected and the «Start/Pause/
Cancel» button was pressed.
C
The front door may be ajar.
The Rinse Symbol amongst the Program Indicator Symbols is flashing. (Subject to the
model of your machine, water cut-off symbol may light up too)
You can restart your machine by pressing the
Water may have been cut off.
«Start/Pause/Cancel» button for a short time
after ensuring that the water is not cut off.
you cannot eliminate the problem although you follow the instructions in this section,
AIfconsult
your dealer or the Authorized Service Agent. Never try to repair a nonfunctional
product yourself.
36
EN
8 Guarantee
Your new Beko product is guaranteed
against the cost of breakdown repairs
for twenty four (24) months from the
date of the original purchase.
What is covered?
• Repairs necessary as a result
of faulty materials, defective
components or manufacturing
defect.
• The cost of functional replacement
parts, but excluding consumable
items.
• The labour costs of a Beko
approved repairer to carry out the
repair.
What is not covered?
• Transit, delivery or accidental
damage or misuse and abuse.
• Cabinet or appearance parts,
including knobs, flaps, handles or
container lids.
• Accessories or consumable items
including but not limited to, ice trays,
scrapers, cutlery baskets, filters and
light bulbs.
• Repairs required as a result of
unauthorised repair or inexpert
installation that fails to meet the
requirements contained in the user
instruction book.
• Repairs to products used on
commercial or non-residential
household premises.
• Loss of frozen food in freezers
or fridge/freezers. (Food loss
insurance is often included within
your household contents insurance
policy, or may be available
separately from your retailer).
• The product must be correctly
installed, located and operated in
accordance with the instructions
contained in the User Instructions
Booklet provided.
• Professional installation by a
qualified Electrical Domestic
Appliance Installer is recommended
for all Washing Machines,
Dishwashers and Electric Cookers
• Gas Cookers must only be installed
by a CORGI (or BORD GAIS)
registered Gas Installer.
• The guarantee is given only within
the boundaries of the United
Kingdom and the Republic of
Ireland.
• The guarantee is applicable only to
new products and is not transferable
if the product is resold.
• Beko disclaims any liability for
incidental or consequential
damages.
• The guarantee does not in anyway
diminish your statutory or legal
rights.
Should you experience any difficulty in
obtaining service please contact the
Beko Customer Help-Line.
Tel: 0845 600 4911
e-mail:service@beko.co.uk
Important notes.
• Your Beko product is designed and
built for domestic household use
only.
• The guarantee will be void if the
product is installed or used in
commercial or non-residential
domestic household premises.
37
EN
9
Service
Please keep your purchase receipt
or other proof of purchase in a safe
place; you will need to have it should
the product require attention under
guarantee.
agreement document. Otherwise please
call the appropriate number above
where service can be obtained at a
charge.
You should also complete the details
below; it will help us assist you when
requesting service. (The model number
is printed on the Instruction Booklet
and the serial number is printed on the
Rating Label affixed to the appliance)
Should you experience any difficulty in
obtaining service please contact the
Beko Customer Help-Line.
Tel: 0845 600 4911
e-mail:service@beko.co.uk
Model No:
Serial No:
Retailer:
Date of purchase:
For service under guarantee simply
telephone the appropriate number below
UK Mainland & Northern Ireland
Fridges & Freezers
0845 600 4903
Electric Cookers
0845 600 4902
Gas &
0845 600 4905
Dual Fuel Cookers
Washing Machines &
Dishwashers
0845 600 4906
Republic of Ireland
All Refrigeration, 01 862 3411
All Cookers
Washing Machines & Dishwashers
Before requesting service please
check the trouble-shooting guide in the
Operating Instructions as a charge may
be levied where no fault is found even
though your product may still be under
guarantee.
Service once the manufacturers
guarantee has expired.
If you have purchased an extended
guarantee please refer to the instructions
contained within the extended guarantee
38
EN
BUILT-IN INSTALLATION GUIDE
10 BUILT-IN INSTALLATION
540
,8 m
m
590,7 m
m
820 mm
820 mm
600 mm
580
mm
10,4 mm
150,3 mm
51 m
m
2807110175.indd/040211.1720
39
EN
40
EN
590 mm
/ 595 m
m
573.5
mm
338
m
36 m m
m
26m
338
m
36 m
m
m
m
26m
190
m
m
3 38
mm
21mm
1 90
534.5 mm
mm
41
EN
681 m
m
m
172
m
m
mm
534.5
mm
190
338
mm
m
0m
19
26
mm
338
42
m
26 m
mm
2m
m
17
36
mm
8m
m
33
36
mm
EN
1m
m
68
573.5 m
m
590 mm
/ 595 mm
21
mm
IF THE CABINET DOOR OPENS TO RIGHT
Use 35mm hinge cutting tool
IF THE CABINET DOOR OPENS TO LEFT
43
EN
44
EN
1
3
2
4
45
EN
46
EN
820mm
To increase height of product order optional part no: 1493
47
EN
48
EN
49
EN
50
EN
51
EN